summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-11-09mvneta: add FIXED_PHY dependencyArnd Bergmann1-0/+1
The fixed_phy infrastructure is done in a way that is optional, by providing 'static inline' helper functions doing nothing in include/linux/phy_fixed.h for all its APIs. However, three out of the four users (DSA, BCMGENET, and SYSTEMPORT) always 'select FIXED_PHY', presumably because they need that. MVNETA is the fourth one, and if that is built-in but FIXED_PHY is configured as a loadable module, we get a link error: drivers/built-in.o: In function `mvneta_fixed_link_update': fpga-mgr.c:(.text+0x33ed80): undefined reference to `fixed_phy_update_state' Presumably this driver has the same dependency as the others, so this patch also uses 'select' to ensure that the fixed-phy support is built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 898b2970e2c9 ("mvneta: implement SGMII-based in-band link state signaling") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-09net: caif: check return value of alloc_netdevRasmus Villemoes1-2/+5
I don't know if dev can actually be NULL here, but the test should be above alloc_netdev(), to avoid leaking the struct net_device in case dev is actually NULL. And of course the return value from alloc_netdev should be tested. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-09net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMAGeert Uytterhoeven1-1/+2
If NO_DMA=y: ERROR: "dma_set_mask" [drivers/net/ethernet/hisilicon/hns/hns_enet_drv.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/hisilicon/hns/hns_enet_drv.ko] undefined! ERROR: "dma_unmap_page" [drivers/net/ethernet/hisilicon/hns/hns_enet_drv.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/hisilicon/hns/hns_enet_drv.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/hisilicon/hns/hns_enet_drv.ko] undefined! ERROR: "dma_supported" [drivers/net/ethernet/hisilicon/hns/hns_enet_drv.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/hisilicon/hns/hns_enet_drv.ko] undefined! ERROR: "dma_set_mask" [drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko] undefined! ERROR: "dma_supported" [drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/hisilicon/hns/hnae.ko] undefined! ERROR: "dma_unmap_page" [drivers/net/ethernet/hisilicon/hns/hnae.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/hisilicon/hns/hnae.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/hisilicon/hns/hnae.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/hisilicon/hns/hnae.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/hisilicon/hix5hd2_gmac.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/hisilicon/hix5hd2_gmac.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/hisilicon/hix5hd2_gmac.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/hisilicon/hix5hd2_gmac.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/hisilicon/hix5hd2_gmac.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/hisilicon/hip04_eth.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/hisilicon/hip04_eth.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/hisilicon/hip04_eth.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/hisilicon/hip04_eth.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/hisilicon/hip04_eth.ko] undefined! As this affects all of HNS_ENET, HNS_DSAF, HNS, HIX5HD2_GMAC, and HIP04_ETH, add a dependency on HAS_DMA to the main NET_VENDOR_HISILICON symbol to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08drivers: net: xgene: fix RGMII 10/100Mb modeIyappan Subramanian3-3/+48
This patch fixes the RGMII 10/100M mode by reprogramming the clock. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08Merge branch 'skb_to_full_sk'David S. Miller8-87/+149
Eric Dumazet says: ==================== net: add skb_to_full_sk() helper Many contexts need to reach listener socket from skb attached to a request socket. This patch series add skb_to_full_sk() to clearly express this need and use it where appropriate. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08netfilter: nft_meta: use skb_to_full_sk() helperEric Dumazet1-16/+20
SYNACK packets might be attached to request sockets. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08net_sched: em_meta: use skb_to_full_sk() helperEric Dumazet1-46/+92
SYNACK packets might be attached to request sockets. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08sched: cls_flow: use skb_to_full_sk() helperEric Dumazet1-4/+11
SYNACK packets might be attached to request sockets. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08netfilter: xt_owner: use skb_to_full_sk() helperEric Dumazet1-2/+4
SYNACK packets might be attached to a request socket, xt_owner wants to gte the listener in this case. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08smack: use skb_to_full_sk() helperEric Dumazet1-4/+7
This module wants to access sk->sk_security, which is not available for request sockets. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()Eric Dumazet3-15/+15
Generalize selinux_skb_sk() added in commit 212cd0895330 ("selinux: fix random read in selinux_ip_postroute_compat()") so that we can use it other contexts. Use it right away in selinux_netlbl_skbuff_setsid() Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08Merge tag 'nfc-fixes-4.4-1' of ↵David S. Miller4-33/+22
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz says: ==================== NFC 4.4 fixes This is the 1st NFC fixes pull request for 4.4. It includes bug fixes and one fix for a build failure, all of them introduced with the first NFC pull request for 4.4. We have: - Fix nfcmrvl SPI driver potential build error due to a broken Kconfig dependency. - A few fixes for the firmware download implementation for the nfcmrvl UART driver. - A GPIO allocation leak for the nfcmrvl driver. - One code simplification for the nfcmrvl DT handling. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-08bpf: doc: correct arch list for supported eBPF JITYang Shi1-3/+3
aarch64 and s390x support eBPF JIT too, correct document to reflect this and avoid any confusion. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-07dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"Markus Elfring1-2/+1
The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-07bonding: fix panic on non-ARPHRD_ETHER enslave failureJay Vosburgh1-0/+1
Since commit 7d5cd2ce529b, when bond_enslave fails on devices that are not ARPHRD_ETHER, if needed, it resets the bonding device back to ARPHRD_ETHER by calling ether_setup. Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP if the bond device is up, leaving it in a quasi-down state without having actually gone through dev_close. For bonding, if any periodic work queue items are active (miimon, arp_interval, etc), those will remain running, as they are stopped by bond_close. At this point, if the bonding module is unloaded or the bond is deleted, the system will panic when the work function is called. This panic is resolved by calling dev_close on the bond itself prior to calling ether_setup. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-07net/qlcnic: fix mac address restore in bond mode 5/6Jarod Wilson1-1/+2
The bonding driver saves a copy of slaves' original mac address and then assigns whatever mac as needed to the slave, depending on mode. In at least modes 5 and 6 (balance-tlb, balance-alb), it often ends up being the mac address of another slave. On release from the bond, the original mac address is supposed to get restored via a dev_set_mac_address() call in the bonding driver's __bond_release_one() function, which calls the slave's ndo_set_mac_address function, which for qlcnic, is qlcnic_set_mac(). Now, this function tries to be somewhat intelligent and exit early if you're trying to set the mac address to the same thing that is already set. The problem here is that adapter->mac_addr isn't in sync with netdev->dev_addr. The qlcnic driver still has the original mac stored in adapter->mac_addr, while the bonding driver has updated netdev->dev_addr, so qlcnic thinks we're trying to set the same address it already has. I think the way to go here, since the function updates both netdev and adapter's stored mac addresses, is to check if either of them doesn't match the newly requested mac. Simply checking netdev's value only could result in a similar mismatch and non-update, so look at both. CC: Dept-GELinuxNICDev@qlogic.com CC: netdev@vger.kernel.org CC: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-07fjes: Delete an unnecessary check before the function call "vfree"Markus Elfring1-3/+1
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05selinux: fix random read in selinux_ip_postroute_compat()Eric Dumazet1-4/+14
In commit e446f9dfe17b ("net: synack packets can be attached to request sockets"), I missed one remaining case of invalid skb->sk->sk_security access. Dmitry Vyukov got a KASan report pointing to it. Add selinux_skb_sk() helper that is responsible to get back to the listener if skb is attached to a request socket, instead of duplicating the logic. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05Merge branch 'bnxt_en-fixes'David S. Miller3-30/+64
Michael Chan says: ==================== bnxt_en: Bug fixes. Miscellaneous small bug fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05bnxt_en: More robust SRIOV cleanup sequence.Jeffrey Huang1-13/+27
Instead of always calling pci_sriov_disable() in remove_one(), the driver should detect whether VFs are currently assigned to the VMs. If the VFs are active in VMs, then it should not disable SRIOV as it is catastrophic to the VMs. Instead, it just leaves the VFs alone and continues to unload the PF. The user can then cleanup the VMs even after the PF driver has been unloaded. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05bnxt_en: Fix comparison of u16 sw_id against negative value.Michael Chan1-4/+5
Assign the return value from bitmap_find_free_region() to an integer variable and check for negative error codes first, before assigning the bit ID to the unsigned sw_id field. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05bnxt_en: map CAG_REG_LEGACY_INT_STATUS_MASK to GRC window #4Jeffrey Huang2-3/+20
In order to use offset 0x4014 for reading CAG interrupt status, the actual CAG register must be mapped to GRC bar0 window #4. Otherwise, the driver is reading garbage. This patch corrects this issue. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05bnxt_en: Determine tcp/ipv6 RSS hash type correctly.Michael Chan1-5/+7
The profile ID in the completion record needs to be ANDed with the profile ID mask of 0x1f. This bug was causing the SKB hash type and the gso_type to be wrong in some cases. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05bnxt_en: Change sp events definitions to represent bit position.Jeffrey Huang1-5/+5
Fix the sp event bits to be bit positions instead of bit values since the bit helper functions are expecting the former. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05tcp: use correct req pointer in tcp_move_syn() callsEric Dumazet2-2/+2
I mistakenly took wrong request sock pointer when calling tcp_move_syn() @req_unhash is either a copy of @req, or a NULL value for FastOpen connexions (as we do not expect to unhash the temporary request sock from ehash table) Fixes: 805c4bc05705 ("tcp: fix req->saved_syn race") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ying Cai <ycai@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05packet: race condition in packet_bindFrancesco Ruggeri1-31/+49
There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05ipv4: use sk_fullsock() in ipv4_conntrack_defrag()Eric Dumazet1-3/+2
Before converting a 'socket pointer' into inet socket, use sk_fullsock() to detect timewait or request sockets. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05tcp: fix req->saved_syn raceEric Dumazet4-11/+21
For the reasons explained in commit ce1050089c96 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access req->saved_syn unless we own the request sock. This fixes races for listeners using TCP_SAVE_SYN option. Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ying Cai <ycai@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05net: stmmac: fix double-initialization of phy_ifaceLABBE Corentin1-1/+1
The variable phy_iface is double-initialized to itself. This patch remove that. Reported-by: coverity (CID 1271141) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05qlogic: qed: fix error codes in qed_resc_alloc()Dan Carpenter1-3/+9
We accidentally return success instead of -ENOMEM here. Fixes: fe56b9e6a8d9 ('qed: Add module with basic common support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05net: dsa: mv88e6xxx: isolate unbridged portsVivien Didelot4-0/+48
The DSA documentation specifies that each port must be capable of forwarding frames to the CPU port. The last changes on bridging support for the mv88e6xxx driver broke this requirement for non-bridged ports. So as for the bridged ports, reserve a few VLANs (4000+) in the switch to isolate ports that have not been bridged yet. By default, a port will be isolated with the CPU and DSA ports. When the port joins a bridge, it will leave its reserved port. When it is removed from a bridge, it will join its reserved VLAN again. Fixes: 5fe7f68016ff ("net: dsa: mv88e6xxx: fix hardware bridging") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05USB: qmi_wwan: Add quirk for Quectel EC20 Mini PCIe modulePetr Štetiar1-0/+21
This device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout where EC20 has QMI on interface 4 instead of 0. lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05Merge branch 'for-upstream' of ↵David S. Miller4-11/+34
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2015-11-05 The following set of Bluetooth patches would be good to get into 4.4-rc1 if possible: - Fix for missing LE CoC parameter validity checks - Fix for potential deadlock in btusb - Fix for issuing unsupported commands during HCI init Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05bpf: add mod default A and X test casesYang Shi1-0/+30
When running "mod X" operation, if X is 0 the filter has to be halt. Add new test cases to cover A = A mod X if X is 0, and A = A mod 1. CC: Xi Wang <xi.wang@gmail.com> CC: Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05bnxt_en: add VXLAN dependencyArnd Bergmann1-0/+1
VXLAN may be a loadable module, and this driver cannot be built-in in that case, or we get a link error: drivers/built-in.o: In function `__bnxt_open_nic': drivers/net/ethernet/broadcom/bnxt/bnxt.c:4581: undefined reference to `vxlan_get_rx_port' This adds a Kconfig dependency that ensures that either VXLAN is disabled (which the driver handles correctly), or we depend on VXLAN itself and disallow built-in compilation when VXLAN is a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04net: add forgotten IFF_L3MDEV_SLAVE defineJiri Pirko1-0/+1
Fixes: fee6d4c77 ("net: Add netif_is_l3_slave") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04ipv6: clean up dev_snmp6 proc entry when we fail to initialize inet6_devSabrina Dubroca1-0/+1
In ipv6_add_dev, when addrconf_sysctl_register fails, we do not clean up the dev_snmp6 entry that we have already registered for this device. Call snmp6_unregister_dev in this case. Fixes: a317a2f19da7d ("ipv6: fail early when creating netdev named all or default") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04qlogic: qed: fix a test for MODE_MF_SIDan Carpenter1-1/+1
MODE_MF_SI is 9. We should be testing bit 9 instead of AND 0x9. Fixes: fe56b9e6a8d9 ('qed: Add module with basic common support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04qlogic/qed: remove bogus NULL checkDan Carpenter1-5/+0
We check if "p_hwfn" is NULL and then dereference it in the error handling code. I read the code and it isn't NULL so let's remove the check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05Bluetooth: L2CAP: Add missing checks for invalid LE DCIDJohan Hedberg1-1/+8
When receiving a connect response we should make sure that the DCID is within the valid range and that we don't already have another channel allocated for the same DCID. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-05Bluetooth: L2CAP: Fix checked range when allocating new CIDJohan Hedberg1-1/+1
The 'dyn_end' value is also a valid CID so it should be included in the range of values checked. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-05Bluetooth: L2CAP: Fix returning correct LE CoC response codesJohan Hedberg2-1/+10
The core spec defines specific response codes for situations when the received CID is incorrect. Add the defines for these and return them as appropriate from the LE Connect Request handler function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-05Bluetooth: Check for supported white list before issuing commandsMarcel Holtmann1-6/+11
The white list commands might not be implemented if the controller does not actually support the white list. So check the supported commands first before issuing these commands. Not supporting the white list is the same as supporting a white list with zero size. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-05Bluetooth: Fix possible deadlock in btusbKuba Pawlak1-2/+4
commit 8f9d02f470f48416444ac3a1eacecdd0f743f1a7 introduced spinlocks in btusb_work. This is run in a context of a worqueue and can be interrupted by hardware irq. If it happens while spinlock is held, we have a deadlock. Solution is to use _irqsave/_resore version of locking [ 466.460560] ================================= [ 466.460565] [ INFO: inconsistent lock state ] [ 466.460572] 4.3.0-rc6+ #1 Tainted: G W [ 466.460576] --------------------------------- [ 466.460582] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 466.460589] kworker/0:2/94 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 466.460595] (&(&data->rxlock)->rlock){?.-...}, at: [<ffffffffa0526923>] btusb_work+0xa3/0x3fd [btusb] [ 466.460621] {IN-HARDIRQ-W} state was registered at: [ 466.460625] [<ffffffff811021b5>] __lock_acquire+0xc45/0x1e80 [ 466.460638] [<ffffffff811040d5>] lock_acquire+0xe5/0x1f0 [ 466.460646] [<ffffffff8182f108>] _raw_spin_lock+0x38/0x50 [ 466.460657] [<ffffffffa0525448>] btusb_recv_intr+0x38/0x170 [btusb] [ 466.460668] [<ffffffffa0525626>] btusb_intr_complete+0xa6/0x130 [btusb] [ 466.460679] [<ffffffff815d8f1e>] __usb_hcd_giveback_urb+0x8e/0x160 [ 466.460690] [<ffffffff815d911f>] usb_hcd_giveback_urb+0x3f/0x120 [ 466.460698] [<ffffffff81606e4d>] uhci_giveback_urb+0xad/0x280 [ 466.460706] [<ffffffff81608f64>] uhci_scan_schedule.part.33+0x6b4/0xbe0 [ 466.460714] [<ffffffff81609b50>] uhci_irq+0xd0/0x180 [ 466.460722] [<ffffffff815d8296>] usb_hcd_irq+0x26/0x40 [ 466.460729] [<ffffffff81117d40>] handle_irq_event_percpu+0x40/0x300 [ 466.460739] [<ffffffff81118040>] handle_irq_event+0x40/0x60 [ 466.460746] [<ffffffff8111af39>] handle_fasteoi_irq+0x89/0x150 [ 466.460754] [<ffffffff8101e0f3>] handle_irq+0x73/0x120 [ 466.460763] [<ffffffff81832f11>] do_IRQ+0x61/0x120 [ 466.460772] [<ffffffff8183084c>] ret_from_intr+0x0/0x31 [ 466.460780] [<ffffffff81697a77>] cpuidle_enter+0x17/0x20 [ 466.460790] [<ffffffff810f62c2>] call_cpuidle+0x32/0x60 [ 466.460800] [<ffffffff810f65a8>] cpu_startup_entry+0x2b8/0x3f0 [ 466.460807] [<ffffffff818214ca>] rest_init+0x13a/0x140 [ 466.460817] [<ffffffff81f76029>] start_kernel+0x4a3/0x4c4 [ 466.460827] [<ffffffff81f75339>] x86_64_start_reservations+0x2a/0x2c [ 466.460837] [<ffffffff81f75485>] x86_64_start_kernel+0x14a/0x16d [ 466.460846] irq event stamp: 754913 [ 466.460851] hardirqs last enabled at (754913): [<ffffffff8182f4cc>] _raw_spin_unlock_irq+0x2c/0x40 [ 466.460861] hardirqs last disabled at (754912): [<ffffffff8182f28d>] _raw_spin_lock_irq+0x1d/0x60 [ 466.460869] softirqs last enabled at (753024): [<ffffffff810aeaa0>] __do_softirq+0x380/0x490 [ 466.460880] softirqs last disabled at (753009): [<ffffffff810aedef>] irq_exit+0x10f/0x120 [ 466.460888] other info that might help us debug this: [ 466.460894] Possible unsafe locking scenario: [ 466.460899] CPU0 [ 466.460903] ---- [ 466.460907] lock(&(&data->rxlock)->rlock); [ 466.460915] <Interrupt> [ 466.460918] lock(&(&data->rxlock)->rlock); [ 466.460926] *** DEADLOCK *** [ 466.460935] 2 locks held by kworker/0:2/94: [ 466.460939] #0: ("events"){.+.+.+}, at: [<ffffffff810c69bb>] process_one_work+0x16b/0x660 [ 466.460958] #1: ((&data->work)){+.+...}, at: [<ffffffff810c69bb>] process_one_work+0x16b/0x660 [ 466.460974] Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-04VSOCK: call sk->sk_data_ready() on accept()Stefan Hajnoczi1-1/+1
When a listen socket enqueues a connection for userspace to accept(), the sk->sk_data_ready() callback should be invoked. In-kernel socket users rely on this callback to detect when incoming connections are available. Currently the sk->sk_state_change() callback is invoked by vmci_transport.c. This happens to work for userspace applications since sk->sk_state_change = sock_def_wakeup() and sk->sk_data_ready = sock_def_readable() both wake up the accept() waiter. In-kernel socket users, on the other hand, fail to detect incoming connections. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04tun_dst: Fix potential NULL dereferenceTobias Klauser1-1/+2
In tun_dst_unclone() the return value of skb_metadata_dst() is checked for being NULL after it is dereferenced. Fix this by moving the dereference after the NULL check. Found by the Coverity scanner (CID 1338068). Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04net/core: ensure features get disabled on new lower devsJarod Wilson1-3/+4
With moving netdev_sync_lower_features() after the .ndo_set_features calls, I neglected to verify that devices added *after* a flag had been disabled on an upper device were properly added with that flag disabled as well. This currently happens, because we exit __netdev_update_features() when we see dev->features == features for the upper dev. We can retain the optimization of leaving without calling .ndo_set_features with a bit of tweaking and a goto here. Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04net: Fix prefsrc lookupsDavid Ahern1-3/+10
A bug report (https://bugzilla.kernel.org/show_bug.cgi?id=107071) noted that the follwoing ip command is failing with v4.3: $ ip route add 10.248.5.0/24 dev bond0.250 table vlan_250 src 10.248.5.154 RTNETLINK answers: Invalid argument 021dd3b8a142d changed the lookup of the given preferred source address to use the table id passed in, but this assumes the local entries are in the given table which is not necessarily true for non-VRF use cases. When validating the preferred source fallback to the local table on failure. Fixes: 021dd3b8a142d ("net: Add routes to the table associated with the device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04ipv4: fix a potential deadlock in mcast getsockopt() pathWANG Cong2-23/+34
Sasha reported the following lockdep warning: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_INET); lock(rtnl_mutex); lock(sk_lock-AF_INET); lock(rtnl_mutex); This is due to that for IP_MSFILTER and MCAST_MSFILTER, we take rtnl lock before the socket lock in setsockopt() path, but take the socket lock before rtnl lock in getsockopt() path. All the rest optnames are setsockopt()-only. Fix this by aligning the getsockopt() path with the setsockopt() path, so that all mcast socket path would be locked in the same order. Note, IPv6 part is different where rtnl lock is not held. Fixes: 54ff9ef36bdf ("ipv4, ipv6: kill ip_mc_{join, leave}_group and ipv6_sock_mc_{join, drop}") Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04ipv4: disable BH when changing ip local port rangeWANG Cong1-2/+2
This fixes the following lockdep warning: [ INFO: inconsistent lock state ] 4.3.0-rc7+ #1197 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. sysctl/1019 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&net->ipv4.ip_local_ports.lock)->seqcount){+.+-..}, at: [<ffffffff81921de7>] ipv4_local_port_range+0xb4/0x12a {IN-SOFTIRQ-R} state was registered at: [<ffffffff810bd682>] __lock_acquire+0x2f6/0xdf0 [<ffffffff810be6d5>] lock_acquire+0x11c/0x1a4 [<ffffffff818e599c>] inet_get_local_port_range+0x4e/0xae [<ffffffff8166e8e3>] udp_flow_src_port.constprop.40+0x23/0x116 [<ffffffff81671cb9>] vxlan_xmit_one+0x219/0xa6a [<ffffffff81672f75>] vxlan_xmit+0xa6b/0xaa5 [<ffffffff817f2deb>] dev_hard_start_xmit+0x2ae/0x465 [<ffffffff817f35ed>] __dev_queue_xmit+0x531/0x633 [<ffffffff817f3702>] dev_queue_xmit_sk+0x13/0x15 [<ffffffff818004a5>] neigh_resolve_output+0x12f/0x14d [<ffffffff81959cfa>] ip6_finish_output2+0x344/0x39f [<ffffffff8195bf58>] ip6_finish_output+0x88/0x8e [<ffffffff8195bfef>] ip6_output+0x91/0xe5 [<ffffffff819792ae>] dst_output_sk+0x47/0x4c [<ffffffff81979392>] NF_HOOK_THRESH.constprop.30+0x38/0x82 [<ffffffff8197981e>] mld_sendpack+0x189/0x266 [<ffffffff8197b28b>] mld_ifc_timer_expire+0x1ef/0x223 [<ffffffff810de581>] call_timer_fn+0xfb/0x28c [<ffffffff810ded1e>] run_timer_softirq+0x1c7/0x1f1 Fixes: b8f1a55639e6 ("udp: Add function to make source port for UDP tunnels") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 06:10:02 +0000