summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-04-10clk: ux500: Add support for sysctrl clocksUlf Hansson3-0/+251
The abx500 sysctrl clocks are using the ab8500 sysctrl driver to modify the clock hardware. Sysctrl clocks are represented by a ab8500 sysctrl register and with a corresponding bitmask. The sysctrl clocks are slow path clocks, which means clk_prepare and clk_unprepare will be used to gate|ungate these clocks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-08clk: mvebu: Fix valid value range checking for cpu_freq_selectAxel Lin1-2/+2
cpu_freq_select is used as array subscript, thus the valid value range is 0 ... ARRAY_SIZE() - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed up trivial merge issues]
2013-04-08clk: Fixup locking issues for clk_set_parentUlf Hansson1-15/+52
Updating the clock tree topology must be protected with the spinlock when doing clk_set_parent, otherwise we can not handle the migration of the enable_count in a safe manner. While issuing the .set_parent callback to make the clk-hw perform the switch to the new parent, we can not hold the spinlock since it is must be allowed to be slow path. This complicates error handling, but is still possible to achieve. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-08clk: Fixup errorhandling for clk_set_parentUlf Hansson1-20/+36
Fixup the broken feature of allowing reparent of a clk to the orhpan list and vice verse. When operating on a single-parent clk, the .set_parent callback for the clk hw is optional to implement, but for a multi-parent clk it is mandatory. Moreover improve the errorhandling by verifying the prerequisites before triggering clk notifiers. This will prevent unnecessary rollback with ABORT_RATE_CHANGE. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-08clk: Restructure code for __clk_reparentUlf Hansson1-28/+42
Split __clk_reparent into three pieces, one for doing the actual reparent for updating the clock tree topology, one for the COMMON_CLK_DEBUG code and one for doing the rate recalculation. This patch also makes it possible to hold the spinlock over the update of the clock tree topology, which could not be done before when both debugfs updates and clock rate updates was done within the same function. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-04clk: sunxi: drop an unnecesary kmallocEmilio López1-1/+1
clk_register will copy this information, so we can just use a normal array and do one less dynamic allocation. Signed-off-by: Emilio López <emilio@elopez.com.ar> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-04clk: sunxi: drop CLK_IGNORE_UNUSEDEmilio López1-4/+4
This flag was in place to prevent important clocks from getting gated while they had no users. Now that the UART driver supports clocks properly, we can drop this. Signed-off-by: Emilio López <emilio@elopez.com.ar> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-04clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gatesEmilio López2-1/+196
This patchset adds DT support for all the AXI, AHB, APB0 and APB1 gates present on sunxi SoCs. Signed-off-by: Emilio López <emilio@elopez.com.ar> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-03clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flagSoren Brinkmann2-3/+10
Dividers which have CLK_DIVIDER_ONE_BASED set have a redundant state, being a divider value of zero. Some hardware implementations allow a zero divider which simply doesn't alter the frequency. I.e. it acts like a divide by one or bypassing the divider. This flag is used to handle such HW in the clk-divider model. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-03clk: mvebu: Use common of_clk_init() functionJean-Francois Moine3-42/+3
The use common of_clk_init() function simplifies the clock initialization and adds handling of the DT "fixed-clock". Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed $SUBJECT to reflect correct file path]
2013-04-02clk: fix clk_mux::flags kerneldocJames Hogan1-1/+1
The kerneldoc comment for struct clk_mux documented the non-existent num_clks instead of flags. Correct this. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-02clk: allow reentrant calls into the clk frameworkMike Turquette1-2/+42
Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-04-02clk: abstract locking out into helper functionsMike Turquette1-38/+61
Create locking helpers for the global mutex and global spinlock. The definitions of these helpers will be expanded upon in the next patch which introduces reentrancy into the locking scheme. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-27clk: zynq: Add missing zynq clk headerMichal Simek1-0/+1
Include zynq clk header where init function is declared. It removes this sparse warning: drivers/clk/clk-zynq.c:373:13: warning: symbol 'xilinx_zynq_clocks_init' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-27clk: sunxi: rename compatible stringsEmilio López2-19/+19
During the introduction of the Allwinner SoC platforms, sunxi was initially meant as a generic name for all the variants of the Allwinner SoC. It was ok at the time of the support of only the A10 and A13 that look pretty much the same; but it's beginning to be troublesome with the future addition of the Allwinner A31 (sun6i) that is quite different, and would introduce some weird logic, where sunxi would actually mean in some case sun4i and sun5i but without sun6i... Moreover, it makes the compatible strings naming scheme not consistent with other architectures, where usually for this kind of compability, we just use the oldest SoC name that has this IP, so let's do just this. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-27arm: sunxi: Add useful information about sunxi clocksEmilio López1-0/+56
This patch contains useful bits of information about the sunxi clocks that may help and/or be interesting for current and future developers. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-27clk: arm: sunxi: Add a new clock driver for sunxi SOCsEmilio López8-2/+643
This commit implements the base CPU clocks for sunxi devices. It has been tested using a slightly modified cpufreq driver from the linux-sunxi 3.0 tree. Additionally, document the new bindings introduced by this patch. Idling: / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 60000000 cpu 0 0 60000000 axi 0 0 60000000 ahb 0 0 60000000 apb0 0 0 30000000 dummy 0 0 0 After "yes >/dev/null &": / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 1008000000 cpu 0 0 1008000000 axi 0 0 336000000 ahb 0 0 168000000 apb0 0 0 84000000 dummy 0 0 0 Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-27clk: ux500: Fix prcmu clocks registrationMaxime Coquelin1-5/+5
In clk_reg_prcmu(), clk->hw.init field is assigned with a reference local to clk_reg_prcmu() function. This patch replaces references to clk->hw.init with calls to __clk_get_name when called after clock registration. This patch applies on top of v3.9-rc4. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: resolved trivial merge issues]
2013-03-27ARM: imx: adapt clk_busy_mux to new clk_mux structFabio Estevam1-1/+1
Commit ce4f3313b05 (clk: add table lookup to mux) caused the following build error on imx_v4_v5_defconfig/imx_v6_v7_defconfig: arch/arm/mach-imx/clk-busy.c:172:11: error: 'struct clk_mux' has no member named 'width' Fix it by passing the 'mask' field. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: shortened $SUBJECT line]
2013-03-26clk: Add composite clock typePrashant Gaikwad3-0/+233
Not all clocks are required to be decomposed into basic clock types but at the same time want to use the functionality provided by these basic clock types instead of duplicating. For example, Tegra SoC has ~100 clocks which can be decomposed into Mux -> Div -> Gate clock types making the clock count to ~300. Also, parent change operation can not be performed on gate clock which forces to use mux clock in driver if want to change the parent. Instead aggregate the basic clock types functionality into one clock and just use this clock for all operations. This clock type re-uses the functionality of basic clock types and not limited to basic clock types but any hardware-specific implementation. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-22clk: add table lookup to muxPeter De Schrijver4-21/+67
Add a table lookup feature to the mux clock. Also allow arbitrary masks instead of the width. This will be used by some clocks on Tegra114. Also adapt the tegra periph clk because it uses struct clk_mux directly. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-22clk: Fix incorrect return type in clk.cSachin Kamat1-1/+1
Return type of function clk_propagate_rate_change is a pointer. But 0 was being returned. Change it to NULL. Silences the following warning: drivers/clk/clk.c:977:24: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-22clk: prima2: fix return value check in sirfsoc_of_clk_init()Wei Yongjun1-1/+1
In case of error, the function clk_get() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: added missing parenthesis to fix compile break]
2013-03-21clk:SPEAr1340: Correct parent clock configurationVipul Kumar Samar1-9/+9
This patch corrects wrongly configured parent clock for following devices: * Video enc/decoder * Video ip * Pin control * ACP * camx Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Reviewed-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-21documentation: clk: fix couple of misspellingEduardo Valentin1-2/+2
Correcting misspelling inside the clk.txt. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-19clk: Add axi-clkgen driverLars-Peter Clausen4-0/+362
This driver adds support for the AXI clkgen pcore to the common clock framework. The AXI clkgen pcore is a AXI front-end to the MMCM_ADV frequency synthesizer commonly found in Xilinx FPGAs. The AXI clkgen pcore is used in Analog Devices' reference designs targeting Xilinx FPGAs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-19clk: ux500: Support is_prepared callback for clk-prcmuUlf Hansson1-54/+80
To be able to gate unused prcmu clocks from the clk_disable_unused sequence, clk-prcmu now implements the is_prepared callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-19clk: Introduce optional unprepare_unused callbackUlf Hansson2-2/+10
An unprepare_unused callback is introduced due to the same reasons to why the disable_unused callback was added. During the clk_disable_unused sequence, those clk_hw that needs specific treatment with regards to being unprepared, shall implement the unprepare_unused callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-19clk: Unprepare the unused prepared slow clocks at late initUlf Hansson1-0/+28
The unused ungated fast clocks are already being disabled from clk_disable_unused at late init. This patch extend this sequence to the slow unused prepared clocks to be unprepared. Unless the optional .is_prepared callback is implemented by a clk_hw the clk_disable_unused sequence will not unprepare any unused clocks, since it will fall back to use the software prepare counter. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed hlist accessors per b67bfe0d]
2013-03-19clk: Introduce optional is_prepared callbackUlf Hansson2-0/+27
To reflect whether a clk_hw is prepared the clk_hw may implement the optional is_prepared callback. If not implemented we fall back to use the software prepare counter. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-19clk: mxs: Fix sparse warningsFabio Estevam1-0/+1
Fix the following sparse warnings: drivers/clk/mxs/clk.c:17:1: warning: symbol 'mxs_lock' was not declared. Should it be static? drivers/clk/mxs/clk.c:19:5: warning: symbol 'mxs_clk_wait' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-17Linux 3.9-rc3v3.9-rc3Linus Torvalds1-1/+1
2013-03-17perf,x86: fix link failure for non-Intel configsDavid Rientjes1-1/+5
Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by: David Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-17perf,x86: fix wrmsr_on_cpu() warning on suspend/resumeLinus Torvalds1-1/+3
Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-17Merge branch 'for-linus' of ↵Linus Torvalds7-12/+25
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Eric's rcu barrier patch fixes a long standing problem with our unmount code hanging on to devices in workqueue helpers. Liu Bo nailed down a difficult assertion for in-memory extent mappings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix warning of free_extent_map Btrfs: fix warning when creating snapshots Btrfs: return as soon as possible when edquot happens Btrfs: return EIO if we have extent tree corruption btrfs: use rcu_barrier() to wait for bdev puts at unmount Btrfs: remove btrfs_try_spin_lock Btrfs: get better concurrency for snapshot-aware defrag work
2013-03-15Btrfs: fix warning of free_extent_mapLiu Bo1-0/+1
Users report that an extent map's list is still linked when it's actually going to be freed from cache. The story is that a) when we're going to drop an extent map and may split this large one into smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means that it's on the list to be logged, then the smaller ems split from it will also be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected. b) we'll keep ems from unlinking the list and freeing when they are flagged with EXTENT_FLAG_LOGGING, because the log code holds one reference. The end result is the warning, but the truth is that we set the flag EXTENT_FLAG_LOGGING only during fsync. So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one. Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Reported-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-15Merge branch 'kbuild' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "One fix for for make headers_install/headers_check to not require make 3.81. The requirement has been accidentally introduced in 3.7." * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: fix make headers_check with make 3.80
2013-03-15Merge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linuxLinus Torvalds3-8/+11
Pull OpenRISC bug fixes from Jonas Bonn: - The GPIO descriptor work has exposed how broken the non-GPIOLIB bits for OpenRISC were. We now require GPIOLIB as this is the preferred way forward. - The system.h split introduced a bug in llist.h for arches using asm-generic/cmpxchg.h directly, which is currently only OpenRISC. The patch here moves two defines from asm-generic/atomic.h to asm-generic/cmpxchg.h to make things work as they should. - The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does not have the virt_to_bus methods, so there's a patch to remove it again. * tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux: openrisc: remove HAVE_VIRT_TO_BUS asm-generic: move cmpxchg*_local defs to cmpxchg.h openrisc: require gpiolib
2013-03-15Merge tag 'char-misc-3.9-rc2' of ↵Linus Torvalds7-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg Kroah-Hartman: "Here are some tiny fixes for the w1 drivers and the final removal patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now gone from your tree, this just drops the Kconfig item itself.) All have been in the linux-next tree for a while" * tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: final removal of CONFIG_EXPERIMENTAL w1: fix oops when w1_search is called from netlink connector w1-gpio: fix unused variable warning w1-gpio: remove erroneous __exit and __exit_p() ARM: w1-gpio: fix erroneous gpio requests
2013-03-15Merge tag 'sound-3.9' of ↵Linus Torvalds8-28/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes, as expected for the middle rc: - A couple of fixes for potential NULL dereferences and out-of-range array accesses revealed by static code parsers - A fix for the wrong error handling detected by trinity - A regression fix for missing audio on some MacBooks - CA0132 DSP loader fixes - Fix for EAPD control of IDT codecs on machines w/o speaker - Fix a regression in the HD-audio widget list parser code - Workaround for the NuForce UDH-100 USB audio" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs sound: sequencer: cap array index in seq_chn_common_event() ALSA: hda/ca0132 - Remove extra setting of dsp_state. ALSA: hda/ca0132 - Check download state of DSP. ALSA: hda/ca0132 - Check if dspload_image succeeded. ALSA: hda - Disable IDT eapd_switch if there are no internal speakers ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value ALSA: usb-audio: add a workaround for the NuForce UDH-100 ALSA: asihpi - fix potential NULL pointer dereference ALSA: seq: Fix missing error handling in snd_seq_timer_open()
2013-03-15Merge branch 'fixes-for-3.9' of ↵Linus Torvalds1-2/+3
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fix from Marek Szyprowski: "An important fix for all ARM architectures which use ZONE_DMA. Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated buffers outsize DMA zone." * 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
2013-03-15Merge tag 'mfd-fixes-3.9-1' of ↵Linus Torvalds16-23/+63
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes Pull MFD fixes from Samuel Ortiz: "This is the first batch of MFD fixes for 3.9. With this one we have: - An ab8500 build failure fix. - An ab8500 device tree parsing fix. - A fix for twl4030_madc remove routine to work properly (when built-in). - A fix for properly registering palmas interrupt handler. - A fix for omap-usb init routine to actually write into the hostconfig register. - A couple of warning fixes for ab8500-gpadc and tps65912" * tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: twl4030-madc: Remove __exit_p annotation mfd: ab8500: Kill "reg" property from binding mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO mfd: wm831x: Don't forward declare enum wm831x_auxadc mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource() mfd: tps65912: Declare and use tps65912_irq_exit() mfd: palmas: Provide irq flags through DT/platform data mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error mfd: omap-usb-host: Actually update hostconfig
2013-03-15Merge tag 'hwmon-for-linus' of ↵Linus Torvalds4-11/+42
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Bug fixes for pmbus, ltc2978, and lineage-pem drivers Added specific maintainer for some hwmon drivers" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus/ltc2978) Fix temperature reporting hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute() hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers
2013-03-15perf,x86: fix kernel crash with PEBS/BTS after suspend/resumeStephane Eranian3-0/+12
This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-15ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecsTakashi Iwai1-0/+4
During the transition to the generic parser, the hook to the codec specific automute function was forgotten. This resulted in the silent output on some MacBooks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15sound: sequencer: cap array index in seq_chn_common_event()Dan Carpenter1-0/+6
"chn" here is a number between 0 and 255, but ->chn_info[] only has 16 elements so there is a potential write beyond the end of the array. If the seq_mode isn't SEQ_2 then we let the individual drivers (either opl3.c or midi_synth.c) handle it. Those functions all do a bounds check on "chn" so I haven't changed anything here. The opl3.c driver has up to 18 channels and not 16. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15mfd: twl4030-madc: Remove __exit_p annotationArnd Bergmann1-1/+1
4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation on the twl4030_madc_remove function, but left an __exit_p() present on the pointer to this function. Using __exit_p was as wrong with the devexit in place as it is now, but now we get a gcc warning about an unused function. In order for the twl4030_madc_remove to work correctly in built-in code, we have to remove the __exit_p. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-15ALSA: hda/ca0132 - Remove extra setting of dsp_state.Dylan Reid1-9/+6
spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset and check it in ca0132_download_dsp(). Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Check download state of DSP.Dylan Reid1-2/+3
Instead of using the dspload_is_loaded() function, check the dsp_state that is kept in the spec. The dspload_is_loaded() function returns true if the DSP transfer was never started. This false-positive leads to multiple second delays when ca0132_setup_efaults() times out on each write. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Check if dspload_image succeeded.Dylan Reid1-2/+6
If dspload_image() fails, it was ignored and dspload_wait_loaded() was still called. dsp_loaded should never be set to true in this case, skip it. The check in dspload_wait_loaded() return true if the DSP is loaded or if it never started. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 21:45:15 +0000