summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-05-11powerpc: Add HAVE_PERF_USER_STACK_DUMP supportChandan Kumar3-2/+3
With perf regs support enabled for powerpc, in commit ed4a4ef85cf5 ("powerpc/perf: Add support for sampling interrupt register state"), the support for obtaining perf user stack dump is already enabled. This patch declares the support for same and also updates documentation to mark the support for perf-regs and perf-stackdump. Signed-off-by: Chandan Kumar <chandan.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/hash64: Fix subpage protection with 4K HPTE configMichael Ellerman1-1/+9
With Linux page size of 64K and hardware only supporting 4K HPTE, if we use subpage protection, we always fail for the subpage 0 as shown below (using the selftest subpage_prot test): 520175565: (4520111850): Failed at 0x3fffad4b0000 (p=13,sp=0,w=0), want=fault, got=pass ! 4520890210: (4520826495): Failed at 0x3fffad5b0000 (p=29,sp=0,w=0), want=fault, got=pass ! 4521574251: (4521510536): Failed at 0x3fffad6b0000 (p=45,sp=0,w=0), want=fault, got=pass ! 4522258324: (4522194609): Failed at 0x3fffad7b0000 (p=61,sp=0,w=0), want=fault, got=pass ! This is because hash preload wrongly inserts the HPTE entry for subpage 0 without looking at the subpage protection information. Fix it by teaching should_hash_preload() not to preload if we have subpage protection configured for that range. It appears this has been broken since it was introduced in 2008. Fixes: fa28237cfcc5 ("[POWERPC] Provide a way to protect 4k subpages when using 64k pages") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Rework into should_hash_preload() to avoid build fails w/SLICES=n] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/hash64: Factor out hash preload psize checkMichael Ellerman1-4/+17
Currently we have a check in hash_preload() against the psize, which is only included when CONFIG_PPC_MM_SLICES is enabled. We want to expand this check in a subsequent patch, so factor it out to allow that. As a bonus it removes the #ifdef in the C code. Unfortunately we can't put this in the existing CONFIG_PPC_MM_SLICES block because it would require a forward declaration. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc: Update of_remove_property() call sites to remove null checkingSuraj Jitindar Singh4-26/+10
After obtaining a property from of_find_property() and before calling of_remove_property() most code checks to ensure that the property returned from of_find_property() is not null. The previous patch moved this check to the start of the function of_remove_property() in order to avoid the case where this check isn't done and a null value is passed. This ensures the check is always conducted before taking locks and attempting to remove the property. Thus it is no longer necessary to perform a check for null values before invoking of_remove_property(). Update of_remove_property() call sites in order to remove redundant checking for null property value as check is now performed within the of_remove_property function(). Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [mpe: Unbreak some lines which are just >80 chars for readability] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11drivers/of: Add check for null property in of_remove_property()Suraj Jitindar Singh1-0/+3
The validity of the property input argument to of_remove_property() is never checked within the function and thus it is possible to pass a null value. It happens that this will be picked up in __of_remove_property() as no matching property of the device node will be found and thus an error will be returned, however once again there is no explicit check for a null value. By the time this is detected 2 locks have already been acquired which is completely unnecessary if the property to remove is null. Add an explicit check in the function of_remove_property() for a null property value and return -ENODEV in this case, this is consistent with what the previous return value would have been when the null value was not detected and passed to __of_remove_property(). By moving an explicit check for the property paramenter into the of_remove_property() function, this will remove the need to perform this check in calling code before invocation of the of_remove_property() function. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/pseries: Add null property check to pseries_discover_pic()Suraj Jitindar Singh1-0/+2
The return value of of_get_property() isn't checked before it is passed to the strstr() function, if it happens that the return value is null then this will result in a null pointer being dereferenced. Add a check to see if the return value of of_get_property() is null and if it is continue straight on to the next node. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: Chris Smart <chris@distroguy.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/powernv/pci: Fix cfg_dbg() & replace with pr_devel()Alexey Kardashevskiy1-9/+6
When cfg_dbg() is enabled (i.e. mapped to printk()), gcc produces errors as the __func__ parameter is missing (pnv_pci_cfg_read() has one); this adds the missing parameter. cfg_dbg() is just an inferior version of pr_devel() so use the latter instead. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11selftests/powerpc: Fix subpage_prot test to return !0 on failureMichael Ellerman1-8/+10
It's helpful for automated testing if the test returns error codes back to the calling program. While we're here fix all the usages of %p to remove the double 0x, ie. %p already includes 0x. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-05-11selftests/powerpc: Test cp_abort during context switchChris Smart5-0/+129
Test that performing a copy paste sequence in userspace on P9 does not result in a leak of the copy into the paste of another process. This is based on Anton Blanchard's context_switch benchmarking code. It sets up two processes tied to the same CPU, one which copies and one which pastes. The paste should never succeed and the test fails if it does. This is a test for commit, "8a64904 powerpc: Add support for userspace P9 copy paste." Patch created with much assistance from Michael Neuling <mikey@neuling.org> Signed-off-by: Chris Smart <chris@distroguy.com> Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc: Remove unnecessary CONFIG_SMP #ifdefsChris Smart1-6/+0
The code in machine_restart/power_off/halt() includes #ifdefs around calls to smp_send_stop(), however these are not required as include/linux/smp.h includes an empty version of this function for CONFIG_SMP=n builds. Signed-off-by: Chris Smart <chris@distroguy.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc: Remove unused remnants from A2 cpuRashmica Gupta1-2/+0
Support for the A2 cpu was removed in commit fb5a515704d7 ("powerpc: Remove platforms/wsp and associated pieces"), and the externs: __setup_cpu_a2 and __restore_cpu_a2 are still around and unused, so remove them. Signed-off-by: Rashmica Gupta <rashmicy@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/slice: Remove slice_mm_new_context()Aneesh Kumar K.V2-5/+1
The usage in mm mmu_context_nohash.c is bogus, because we set the context.id value to MMU_NO_CONTEXT 4 lines previously in the same function, meaning slice_mm_new_context() will always be true. The book3s 64 usage was removed in the previous commit. So remove it as unused. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/subpage: Initialise user psize correctlyAneesh Kumar K.V1-1/+10
As part of the radix support we switched Book3s64 to use a value of ~0 for MMU_NO_CONTEXT. That is because id 0 is special on radix. However that broke the logic in init_new_context(). The code there needs to differentiate between a newly allocated context and one inherited via fork. Previously it worked because a newly allocated context has an id of zero (because it was just memset() to zero), which used to match MMU_NO_CONTEXT, and therefore slice_mm_new_context() did the right thing. Instead check against a context.id value of zero instead of using slice_mm_new_context(). Without this patch we never call slice_set_user_psize(), and end up with a slice psize value of zero and we always end up using 4K HPTE. Fixes: 1a472c9dba6b ("powerpc/mm/radix: Add tlbflush routines") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Fix CONFIG_PPC_MMU_STD_64 typoValentin Rothberg1-5/+5
It's CONFIG_PPC_STD_MMU_64 not ... CONFIG_PPC_MMU_STD_64. Fixes: 11ffc1cfa4c2 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code") Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Document software bits for radixAneesh Kumar K.V1-2/+6
Add #defines for Power ISA 3.0 software defined bits. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Use firmware feature to enable Radix MMUAneesh Kumar K.V1-0/+1
We use the existing "ibm,pa-features" device-tree property to enable Radix MMU mode. This means we default to hash mode unless firmware tells us it's OK to start using Radix mode. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Add THP support for 4K linux page sizeAneesh Kumar K.V4-26/+82
This adds THP support for 4K Linux page size config with radix. We still don't do THP with 4K Linux page size and hash page table. Hash page table needs a 16MB hugepage and we can't do THP with 16MM hugepage and 4K Linux page size. We add missing functions to 4K hash config to get it to build and hash__has_transparent_hugepage() makes sure we don't enable THP for 4K hash config. To catch wrong usage of THP related with 4K config, we add BUG() in those dummy functions we added to get it compile. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Add radix THP callbacksAneesh Kumar K.V5-1/+158
The deposited pgtable_t is a pte fragment hence we cannot use page->lru for linking then together. We use the first two 64 bits for pte fragment as list_head type to link all deposited fragments together. On withdraw we properly zero then out. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/thp: Abstraction for THP functionsAneesh Kumar K.V6-179/+226
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: THP is only available on hash64 as of nowAneesh Kumar K.V3-372/+369
Only code movement in this patch. No functionality change. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Add hugetlb support 4K page sizeAneesh Kumar K.V2-21/+47
We have hugepage at the pmd level with 4K radix config. Hence we don't need to use hugepd format with radix. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Make sure swapper pgdir is properly alignedAneesh Kumar K.V1-5/+8
With 4K page size radix config our level 1 page table size is 64K and it should be naturally aligned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Add radix support for hugetlbAneesh Kumar K.V6-1/+132
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Fix vma_mmu_pagesize() for radixAneesh Kumar K.V1-4/+4
Radix doesn't use the slice framework to find the page size. Hence use vma to find the page size. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: pte_frag abstractionAneesh Kumar K.V6-2/+22
In this patch we make the number of pte fragments per level 4 page table page a variable. Radix level 4 table size is 256 bytes and hence we can have 256 fragments per level 4 page. We don't update the fragment count in this patch. We need to do performance measurements to find the right value for fragment count. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/radix: Update MMU cacheAneesh Kumar K.V1-0/+2
With radix there is no MMU cache. Hence we don't need to do anything in update_mmu_cache(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: vmalloc abstraction in preparation for radixAneesh Kumar K.V8-14/+118
The vmalloc range differs between hash and radix config. Hence make VMALLOC_START and related constants a variable which will be runtime initialized depending on whether hash or radix mode is active. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Fix missing init of ioremap_bot in pgtable_64.c for ppc64e] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Update pte filter for radixAneesh Kumar K.V1-0/+3
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Add radix pgalloc detailsAneesh Kumar K.V5-7/+55
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Make 4K and 64K use pte_t for pgtable_tAneesh Kumar K.V4-145/+52
This patch switches 4K Linux page size config to use pte_t * type instead of struct page * for pgtable_t. This simplifies the code a lot and helps in consolidating both 64K and 4K page allocator routines. The changes should not have any impact, because we already store physical address in the upper level page table tree and that implies we already do struct page * to physical address conversion. One change to note here is we move the pgtable_page_dtor() call for nohash to pte_fragment_free_mm(). The nohash related change is due to the related changes in pgtable_64.c. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Rename function to indicate we are allocating fragmentsAneesh Kumar K.V3-29/+16
Only code cleanup. No functionality change. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Simplify the code dropping 4-level table #ifdefAneesh Kumar K.V1-39/+18
Simplify the code by dropping 4-level page table #ifdef. We are always 4-level now. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Revert changes made to nohash pgalloc-64.hAneesh Kumar K.V2-35/+10
This reverts pgalloc related changes WRT implementing 4-level page table for 64K Linux page size and storing of physical address in higher level page tables since they are only applicable to book3s64 variant and we now have a separate copy for book3s64. This helps to keep these headers simpler. Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Copy pgalloc (part 2)Aneesh Kumar K.V7-25/+59
This moves the nohash variant of pgalloc headers to nohash/ directory Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Make a copy of pgalloc.h for 32 and 64 book3sAneesh Kumar K.V2-0/+375
This patch start to make a book3s variant for pgalloc headers. We have multiple book3s specific changes such as: * 4 level page table * store physical address in higher level table * use pte_t * for pgtable_t Having a book3s64 specific variant helps to keep code simpler and remove lots of #ifdef around code. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Update PTCR on secondary CPUsAneesh Kumar K.V1-3/+7
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Pick the address layout for radix configAneesh Kumar K.V1-0/+109
Hash needs special get_unmapped_area() handling because of limitations around base page size, so we have to set HAVE_ARCH_UNMAPPED_AREA. With radix we don't have such restrictions, so we could use the generic code. But because we've set HAVE_ARCH_UNMAPPED_AREA (for hash), we have to re-implement the same logic as the generic code. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Limit paca allocation in radixAneesh Kumar K.V1-1/+19
On return from RTAS we access the paca variables and we have 64 bit disabled. This requires us to limit paca in 32 bit range. Fix this by setting ppc64_rma_size to first_memblock_size/1G range. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Add checks in slice code to catch radix usageAneesh Kumar K.V1-0/+16
Radix doesn't need slice support. Catch incorrect usage of slice code when radix is enabled. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Isolate hash table function from pseries guest codeAneesh Kumar K.V2-4/+13
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related codeAneesh Kumar K.V6-16/+52
We also use MMU_FTR_RADIX to branch out from code path specific to hash. No functionality change. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm/radix: Add MMU_FTR_RADIXAneesh Kumar K.V2-2/+12
We are going to add asm changes in the follow up patches. Add the feature bit now so that we can get it all build. mpe: When CONFIG_PPC_RADIX_MMU=n we omit MMU_FTR_RADIX from the MMU_FTRS_POSSIBLE mask. This allows the compiler to work out that those checks will always be false and so the code can be elided completely. Note we do *not* define MMU_FTR_RADIX to 0 in the RADIX_MMU=n case, because that doesn't work with the ASM_FTR patching. In particular an IF_SET section will result in a mask and value of zero, which is always true, meaning the section *won't* be patched, which is the opposite of what we want. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/mm: Add mask of possible MMU featuresMichael Ellerman1-1/+13
Follow the example of the cpu feature code, and add a mask of possible MMU features, MMU_FTRS_POSSIBLE. This is used in mmu_has_feature(), which allows the possible mask to act as a shortcut for any features that are not possible, but still allows the feature bit itself to be defined. We will use this in the next commit to allow MMU_FTR_RADIX checks to be elided when MMU_FTR_RADIX is not possible. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01powerpc/mm/radix: Add tlbflush routinesAneesh Kumar K.V8-5/+310
Core kernel doesn't track the page size of the VA range that we are invalidating. Hence we end up flushing TLB for the entire mm here. Later patches will improve this. We also don't flush page walk cache separetly instead use RIC=2 when flushing TLB, because we do a MMU gather flush after freeing page table. MMU_NO_CONTEXT is updated for hash. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01powerpc/mm: Hash abstraction for tlbflush routinesAneesh Kumar K.V4-15/+73
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01powerpc/mm: Rename mmu_context_hash64.c to mmu_context_book3s64.cAneesh Kumar K.V2-4/+3
This file now contains both hash and radix specific code. Rename it to indicate this better. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01powerpc/mm/radix: Add mmu context handling callback for radixAneesh Kumar K.V2-8/+39
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01powerpc/mm: Abstraction for switch_mmu_context()Aneesh Kumar K.V5-17/+19
How we switch MMU context differs between hash and radix. For hash we need to switch the SLB details and for radix we need to switch the PID SPR. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01powerpc/mm/radix: Add radix callbacks for vmemmap and map_kernel page()Aneesh Kumar K.V3-0/+38
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-01powerpc/mm: Abstraction for vmemmap and map_kernel_page()Aneesh Kumar K.V6-16/+41
For hash we create vmemmap mapping using bolted hash page table entries. For radix we fill the radix page table. The next patch will add the radix details for creating vmemmap mappings. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 15:44:26 +0000