summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-07-23arm64: virt: ensure visibility of __boot_cpu_modeMark Rutland1-0/+13
Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a cached value of __boot_cpu_mode may be incoherent with that in memory. This could lead to a failure to detect mismatched boot modes. This patch adds flushing to ensure that writes by secondaries to __boot_cpu_mode are made visible before we test against it. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-21Linux 3.11-rc2v3.11-rc2Linus Torvalds1-1/+1
2013-07-21Merge tag 'acpi-video-3.11' of ↵Linus Torvalds9-28/+137
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI video support fixes from Rafael Wysocki: "I'm sending a separate pull request for this as it may be somewhat controversial. The breakage addressed here is not really new and the fixes may not satisfy all users of the affected systems, but we've had so much back and forth dance in this area over the last several weeks that I think it's time to actually make some progress. The source of the problem is that about a year ago we started to tell BIOSes that we're compatible with Windows 8, which we really need to do, because some systems shipping with Windows 8 are tested with it and nothing else, so if we tell their BIOSes that we aren't compatible with Windows 8, we expose our users to untested BIOS/AML code paths. However, as it turns out, some Windows 8-specific AML code paths are not tested either, because Windows 8 actually doesn't use the ACPI methods containing them, so if we declare Windows 8 compatibility and attempt to use those ACPI methods, things break. That occurs mostly in the backlight support area where in particular the _BCM and _BQC methods are plain unusable on some systems if the OS declares Windows 8 compatibility. [ The additional twist is that they actually become usable if the OS says it is not compatible with Windows 8, but that may cause problems to show up elsewhere ] Investigation carried out by Matthew Garrett indicates that what Windows 8 does about backlight is to leave backlight control up to individual graphics drivers. At least there's evidence that it does that if the Intel graphics driver is used, so we've decided to follow Windows 8 in that respect and allow i915 to control backlight (Daniel likes that part). The first commit from Aaron Lu makes ACPICA export the variable from which we can infer whether or not the BIOS believes that we are compatible with Windows 8. The second commit from Matthew Garrett prepares the ACPI video driver by making it initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). The third commit implements the actual workaround making i915 take over backlight control if the firmware thinks it's dealing with Windows 8 and is based on the work of multiple developers, including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. The final commit from Aaron Lu makes us follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI. Hopefully, this approach will allow us to avoid using blacklists of systems that should not declare Windows 8 compatibility just to avoid backlight control problems in the future. - Change from Aaron Lu makes ACPICA export a variable which can be used by driver code to determine whether or not the BIOS believes that we are compatible with Windows 8. - Change from Matthew Garrett makes the ACPI video driver initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). - Fix from Rafael J Wysocki implements Windows 8 backlight support workaround making i915 take over bakclight control if the firmware thinks it's dealing with Windows 8. Based on the work of multiple developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. - Fix from Aaron Lu makes the kernel follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI" * tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: no automatic brightness changes by win8-compatible firmware ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 ACPI / video: Always call acpi_video_init_brightness() on init ACPICA: expose OSI version
2013-07-20Merge tag 'ext4_for_linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext[34] tmpfile bugfix from Ted Ts'o: "Fix regression caused by commit af51a2ac36d1f which added ->tmpfile() support (along with a similar fix for ext3)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext3: fix a BUG when opening a file with O_TMPFILE flag ext4: fix a BUG when opening a file with O_TMPFILE flag
2013-07-20ext3: fix a BUG when opening a file with O_TMPFILE flagZheng Liu1-1/+1
When we try to open a file with O_TMPFILE flag, we will trigger a bug. The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and this check always fails because we set ->i_nlink = 1 in inode_init_always(). We can use the following program to trigger it: int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_TMPFILE, 0666); if (fd < 0) { perror("open "); return -1; } close(fd); return 0; } The oops message looks like this: kernel: kernel BUG at fs/ext3/namei.c:1992! kernel: invalid opcode: 0000 [#1] SMP kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4 kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010 kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000 kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP: 0018:ffff8801124d5cc8 EFLAGS: 00010202 kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0 kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8 kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000 kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8 kernel: FS: 00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0 kernel: Stack: kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7 kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000 kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1 kernel: Call Trace: kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd] kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3] kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7 kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30 kernel: [<ffffffff82065fa2>] ? __dequeue_entity+0x33/0x38 kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102 kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20 kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0 kernel: RIP [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP <ffff8801124d5cc8> Here we couldn't call clear_nlink() directly because in d_tmpfile() we will call inode_dec_link_count() to decrease ->i_nlink. So this commit tries to call d_tmpfile() before ext4_orphan_add() to fix this problem. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk>
2013-07-20ext4: fix a BUG when opening a file with O_TMPFILE flagZheng Liu1-1/+1
When we try to open a file with O_TMPFILE flag, we will trigger a bug. The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and this check always fails because we set ->i_nlink = 1 in inode_init_always(). We can use the following program to trigger it: int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_TMPFILE, 0666); if (fd < 0) { perror("open "); return -1; } close(fd); return 0; } The oops message looks like this: kernel BUG at fs/ext4/namei.c:2572! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12 Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000 RIP: 0010:[<ffffffff8125ce69>] [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0 RSP: 0018:ffff88010f7b7cf8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001 RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668 R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0 FS: 00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0 DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Stack: 0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00 ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004 Call Trace: [<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180 [<ffffffff811cba78>] path_openat+0x238/0x700 [<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80 [<ffffffff811cc647>] do_filp_open+0x47/0xa0 [<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200 [<ffffffff811ba2e4>] do_sys_open+0x124/0x210 [<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290 [<ffffffff811ba3ee>] SyS_open+0x1e/0x20 [<ffffffff816ca8d4>] tracesys+0xdd/0xe2 [<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0 Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00 Here we couldn't call clear_nlink() directly because in d_tmpfile() we will call inode_dec_link_count() to decrease ->i_nlink. So this commit tries to call d_tmpfile() before ext4_orphan_add() to fix this problem. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Tested-by: Dave Jones <davej@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-20Merge tag 'staging-3.11-rc2' of ↵Linus Torvalds155-91617/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg KH: "Here are a few iio driver fixes for 3.11-rc2. They are still spread across drivers/iio and drivers/staging/iio so they are coming in through this tree. I've also removed the drivers/staging/csr/ driver as the developers who originally sent it to me have moved on to other companies, and CSR still will not send us the specs for the device, making the driver pretty much obsolete and impossible to fix up. Deleting it now prevents people from sending in lots of tiny codingsyle fixes that will never go anywhere. It also helps to offset the large lustre filesystem merge that happened in 3.11-rc1 in the overall 3.11.0 diffstat. :)" * tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: csr: remove driver iio: lps331ap: Fix wrong in_pressure_scale output value iio staging: fix lis3l02dq, read error handling staging:iio:ad7291: add missing .driver_module to struct iio_info iio: ti_am335x_adc: add missing .driver_module to struct iio_info iio: mxs-lradc: Remove useless check in read_raw iio: mxs-lradc: Fix misuse of iio->trig iio: inkern: fix iio_convert_raw_to_processed_unlocked iio: Fix iio_channel_has_info iio:trigger: device_unregister->device_del to avoid double free iio: dac: ad7303: fix error return code in ad7303_probe()
2013-07-20Merge branch 'for-linus' of ↵Linus Torvalds4-18/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "The sget() one is a long-standing bug and will need to go into -stable (in fact, it had been originally caught in RHEL6), the other two are 3.11-only" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: constify dentry parameter in d_count() livelock avoidance in sget() allow O_TMPFILE to work with O_WRONLY
2013-07-20Merge tag 'ext4_for_linus' of ↵Linus Torvalds3-21/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "Fixes for 3.11-rc2, sent at 5pm, in the professoinal style. :-)" I'm not sure I like this new level of "professionalism". 9-5, people, 9-5. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: call ext4_es_lru_add() after handling cache miss ext4: yield during large unlinks ext4: make the extent_status code more robust against ENOMEM failures ext4: simplify calculation of blocks to free on error ext4: fix error handling in ext4_ext_truncate()
2013-07-20Merge tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2-7/+15
Pull NFS client bugfixes from Trond Myklebust: - Fix a regression against NFSv4 FreeBSD servers when creating a new file - Fix another regression in rpc_client_register() * tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix a regression against the FreeBSD server SUNRPC: Fix another issue with rpc_client_register()
2013-07-20Merge branch 'for-linus' of ↵Linus Torvalds2-7/+22
git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next Pull btrfs fixes from Josef Bacik: "I'm playing the role of Chris Mason this week while he's on vacation. There are a few critical fixes for btrfs here, all regressions and have been tested well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next: Btrfs: fix wrong write offset when replacing a device Btrfs: re-add root to dead root list if we stop dropping it Btrfs: fix lock leak when resuming snapshot deletion Btrfs: update drop progress before stopping snapshot dropping
2013-07-20vfs: constify dentry parameter in d_count()Peng Tao1-1/+1
so that it can be used in places like d_compare/d_hash without causing a compiler warning. Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-20livelock avoidance in sget()Al Viro1-15/+10
Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about to fail. The superblock is on ->fs_supers, ->s_umount is held exclusive, ->s_active is 1. Along comes two more processes, trying to mount the same thing; sget() in each is picking that superblock, bumping ->s_count and trying to grab ->s_umount. ->s_active is 3 now. Original mount(2) finally gets to deactivate_locked_super() on failure; ->s_active is 2, superblock is still ->fs_supers because shutdown will *not* happen until ->s_active hits 0. ->s_umount is dropped and now we have two processes chasing each other: s_active = 2, A acquired ->s_umount, B blocked A sees that the damn thing is stillborn, does deactivate_locked_super() s_active = 1, A drops ->s_umount, B gets it A restarts the search and finds the same superblock. And bumps it ->s_active. s_active = 2, B holds ->s_umount, A blocked on trying to get it ... and we are in the earlier situation with A and B switched places. The root cause, of course, is that ->s_active should not grow until we'd got MS_BORN. Then failing ->mount() will have deactivate_locked_super() shut the damn thing down. Fortunately, it's easy to do - the key point is that grab_super() is called only for superblocks currently on ->fs_supers, so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and bump ->s_active; we must never increment ->s_count for superblocks past ->kill_sb(), but grab_super() is never called for those. The bug is pretty old; we would've caught it by now, if not for accidental exclusion between sget() for block filesystems; the things like cgroup or e.g. mtd-based filesystems don't have anything of that sort, so they get bitten. The right way to deal with that is obviously to fix sget()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-20allow O_TMPFILE to work with O_WRONLYAl Viro2-2/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-19Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds8-61/+213
Pull UML fixes from Richard Weinberger: "Special thanks goes to Toralf Föster for continuously testing UML and reporting issues!" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove dead code um: siginfo cleanup uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases um: Fix wait_stub_done() error handling um: Mark stub pages mapping with VM_PFNMAP um: Fix return value of strnlen_user()
2013-07-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds10-21/+69
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 3.11. Half of then is for Netlogic the remainder touches things across arch/mips. Nothing really dramatic and by rc1 standards MIPS will be in fairly good shape with this applied. Tested by building all MIPS defconfigs of which with this pull request four platforms won't build. And yes, it boots also on my favorite test systems" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION MIPS: Octeon: Fix DT pruning bug with pip ports MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP MIPS: tlbex: fix broken build in v3.11-rc1 MIPS: Netlogic: Add XLP PIC irqdomain MIPS: Netlogic: Fix USB block's coherent DMA mask MIPS: tlbex: Fix typo in r3000 tlb store handler MIPS: BMIPS: Fix thinko to release slave TP from reset MIPS: Delete dead invocation of exception_exit().
2013-07-19Merge tag 'arm64-stable' of ↵Linus Torvalds5-42/+31
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Post -rc1 update to the common reboot infrastructure. - Fixes (user cache maintenance fault handling, !COMPAT compilation, CPU online and interrupt hanlding). * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: use common reboot infrastructure arm64: mm: don't treat user cache maintenance faults as writes arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler() arm64: Only enable local interrupts after the CPU is marked online
2013-07-19Merge branch 'for-linus' of ↵Linus Torvalds9-46/+190
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "An update for the BFP jit to the latest and greatest, two patches to get kdump working again, the random-abort ptrace extention for transactional execution, the z90crypt module alias for ap and a tiny cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Alias for new zcrypt device driver base module s390/kdump: Allow copy_oldmem_page() copy to virtual memory s390/kdump: Disable mmap for s390 s390/bpf,jit: add pkt_type support s390/bpf,jit: address randomize and write protect jit code s390/bpf,jit: use generic jit dumper s390/bpf,jit: call module_free() from any context s390/qdio: remove unused variable s390/ptrace: PTRACE_TE_ABORT_RAND
2013-07-19Btrfs: fix wrong write offset when replacing a deviceStefan Behrens1-1/+1
Miao Xie reported the following issue: The filesystem was corrupted after we did a device replace. Steps to reproduce: # mkfs.btrfs -f -m single -d raid10 <device0>..<device3> # mount <device0> <mnt> # btrfs replace start -rfB 1 <device4> <mnt> # umount <mnt> # btrfsck <device4> The reason for the issue is that we changed the write offset by mistake, introduced by commit 625f1c8dc. We read the data from the source device at first, and then write the data into the corresponding place of the new device. In order to implement the "-r" option, the source location is remapped using btrfs_map_block(). The read takes place on the mapped location, and the write needs to take place on the unmapped location. Currently the write is using the mapped location, and this commit changes it back by undoing the change to the write address that the aforementioned commit added by mistake. Reported-by: Miao Xie <miaox@cn.fujitsu.com> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-07-19Btrfs: re-add root to dead root list if we stop dropping itJosef Bacik1-0/+11
If we stop dropping a root for whatever reason we need to add it back to the dead root list so that we will re-start the dropping next transaction commit. The other case this happens is if we recover a drop because we will add a root without adding it to the fs radix tree, so we can leak it's root and commit root extent buffer, adding this to the dead root list makes this cleanup happen. Thanks, Cc: stable@vger.kernel.org Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-07-19Btrfs: fix lock leak when resuming snapshot deletionJosef Bacik1-0/+2
We aren't setting path->locks[level] when we resume a snapshot deletion which means we won't unlock the buffer when we free the path. This causes deadlocks if we happen to re-allocate the block before we've evicted the extent buffer from cache. Thanks, Cc: stable@vger.kernel.org Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-07-19Btrfs: update drop progress before stopping snapshot droppingJosef Bacik1-6/+8
Alex pointed out a problem and fix that exists in the drop one snapshot at a time patch. If we decide we need to exit for whatever reason (umount for example) we will just exit the snapshot dropping without updating the drop progress. So the next time we go to resume we will BUG_ON() because we can't find the extent we left off at because we never updated it. This patch fixes the problem. Cc: stable@vger.kernel.org Reported-by: Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-07-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+7
Pull KVM fix from Paolo Bonzini: "This single patch fixes a regression caused by one of the optimizations introduced in 3.11, which is generally visible only on AMD processors" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: avoid fast page fault fixing mmio page fault
2013-07-19Merge tag 'pm+acpi-3.11-rc2' of ↵Linus Torvalds12-19/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes collected over the last week, most importnatly two cpufreq reverts fixing regressions introduced in 3.10, an autoseelp fix preventing systems using it from crashing during shutdown and two ACPI scan fixes related to hotplug. Specifics: - Two cpufreq commits from the 3.10 cycle introduced regressions. The first of them was buggy (it did way much more than it needed to do) and the second one attempted to fix an issue introduced by the first one. Fixes from Srivatsa S Bhat revert both. - If autosleep triggers during system shutdown and the shutdown callbacks of some device drivers have been called already, it may crash the system. Fix from Liu Shuo prevents that from happening by making try_to_suspend() check system_state. - The ACPI memory hotplug driver doesn't clear its driver_data on errors which may cause a NULL poiter dereference to happen later. Fix from Toshi Kani. - The ACPI namespace scanning code should not try to attach scan handlers to device objects that have them already, which may confuse things quite a bit, and it should rescan the whole namespace branch starting at the given node after receiving a bus check notify event even if the device at that particular node has been discovered already. Fixes from Rafael J Wysocki. - New ACPI video blacklist entry for a system whose initial backlight setting from the BIOS doesn't make sense. From Lan Tianyu. - Garbage string output avoindance for ACPI PNP from Liu Shuo. - Two Kconfig fixes for issues introduced recently in the s3c24xx cpufreq driver (when moving the driver to drivers/cpufreq) from Paul Bolle. - Trivial comment fix in pm_wakeup.h from Chanwoo Choi" * tag 'pm+acpi-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: ignore BIOS initial backlight value for Fujitsu E753 PNP / ACPI: avoid garbage in resource name cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regression cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in Kconfig cpufreq: s3c24xx: rename CONFIG_CPU_FREQ_S3C24XX_DEBUGFS PM / Sleep: Fix comment typo in pm_wakeup.h PM / Sleep: avoid 'autosleep' in shutdown progress cpufreq: Revert commit a66b2e to fix suspend/resume regression ACPI / memhotplug: Fix a stale pointer in error path ACPI / scan: Always call acpi_bus_scan() for bus check notifications ACPI / scan: Do not try to attach scan handlers to devices having them
2013-07-19arm64: use common reboot infrastructureMarc Zyngier2-2/+3
Commit 7b6d864b48d9 (reboot: arm: change reboot_mode to use enum reboot_mode) changed the way reboot is handled on arm, which has a direct impact on arm64 as we share the reset driver on the VE platform. The obvious fix is to move arm64 to use the same infrastructure. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: removed reboot_mode = REBOOT_HARD default setting] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-19arm64: mm: don't treat user cache maintenance faults as writesWill Deacon1-26/+20
On arm64, cache maintenance faults appear as data aborts with the CM bit set in the ESR. The WnR bit, usually used to distinguish between faulting loads and stores, always reads as 1 and (slightly confusingly) the instructions are treated as reads by the architecture. This patch fixes our fault handling code to treat cache maintenance faults in the same way as loads. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-19arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler()Chen Gang1-7/+0
If 'COMPAT' not defined, aarch32_break_handler() cannot pass compiling, and it can work independent with 'COMPAT', so remove dummy definition. The related error: arch/arm64/kernel/debug-monitors.c:249:5: error: redefinition of ‘aarch32_break_handler’ In file included from arch/arm64/kernel/debug-monitors.c:29:0: /root/linux-next/arch/arm64/include/asm/debug-monitors.h:89:12: note: previous definition of ‘aarch32_break_handler’ was here Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-19arm64: Only enable local interrupts after the CPU is marked onlineCatalin Marinas1-7/+8
There is a slight chance that (timer) interrupts are triggered before a secondary CPU has been marked online with implications on softirq thread affinity. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Kirill Tkhai <tkhai@yandex.ru>
2013-07-19MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATIONMarkos Chandras1-1/+0
Virtualization does not always need KVM capabilities so drop the dependency. The KVM symbol already depends on HAVE_KVM. Fixes the following problem on a randconfig: warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5443/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19um: remove dead codeRichard Weinberger1-1/+0
"me" is not used. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: siginfo cleanupRichard Weinberger4-15/+15
Currently we use both struct siginfo and siginfo_t. Let's use struct siginfo internally to avoid ongoing compiler warning. We are allowed to do so because struct siginfo and siginfo_t are equivalent. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19MIPS: Octeon: Fix DT pruning bug with pip portsFaidon Liambotis1-2/+3
During the pruning of the device tree octeon_fdt_pip_iface() is called for each PIP interface and every port up to the port count is removed from the device tree. However, the count was set to the return value of cvmx_helper_interface_enumerate() which doesn't actually return the count but just returns zero on success. This effectively removed *all* ports from the tree. Use cvmx_helper_ports_on_interface() instead to fix this. This successfully restores the 3 ports of my ERLite-3 and fixes the "kernel assigns random MAC addresses" issue. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge ↵Tristan Schmelcher1-41/+189
cases which_tmpdir did the wrong thing if /dev/shm was a symlink (e.g., to /run/shm), if there were multiple mounts on top of each other, if the mount(s) were obscured by a later mount, or if /dev/shm was a prefix of another mount point. This fixes these cases. Applies to 3.9.6. Signed-off-by: Tristan Schmelcher <tschmelcher@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: Fix wait_stub_done() error handlingRichard Weinberger1-2/+7
If we die within a stub handler we only way to reliable kill the (obviously) dying uml guest process is killing it's host twin on the host side. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: Mark stub pages mapping with VM_PFNMAPRichard Weinberger1-1/+1
Ensure that a process cannot destroy his stub pages with using MADV_DONTNEED and friends. Reported-by: toralf.foerster@gmx.de Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: Fix return value of strnlen_user()Richard Weinberger1-1/+1
In case of an error it must not return -EFAULT. Return 0 like all other archs do. Reported-by: toralf.foerster@gmx.de Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMPJames Hogan1-0/+1
Make KVM_GUEST depend on BROKEN_ON_SMP so that it cannot be enabled with SMP. SMP kernels use ll/sc instructions for an atomic section in the tlb fill handler, with a tlbp instruction contained in the middle. This cannot be emulated with trap & emulate KVM because the tlbp instruction traps and the eret to return to the guest code clears the LLbit which makes the sc instruction always fail. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: tlbex: fix broken build in v3.11-rc1Aaro Koskinen1-1/+1
Commit 6ba045f9fbdafb48da42aa8576ea7a3980443136 (MIPS: Move generated code to .text for microMIPS) deleted tlbmiss_handler_setup_pgd_array, but some references were not converted. Fix that to enable building a MIPS kernel. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Jayachandran C. <jchandra@broadcom.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: Netlogic: Add XLP PIC irqdomainJayachandran C3-13/+61
Add a legacy irq domain for the XLP PIC interrupts. This will be used when interrupts are assigned from the device tree. This change is required after commit c5cdc67 "irqdomain: Remove temporary MIPS workaround code". Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Jayachandran C <jchandra@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: Netlogic: Fix USB block's coherent DMA maskGanesan Ramalingam1-1/+1
The on-chip USB controller on Netlogic XLP does not suppport DMA beyond 32-bit physical address. Set the coherent_dma_mask of the USB in its PCI fixup to support this. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: tlbex: Fix typo in r3000 tlb store handlerTony Wu1-1/+1
commit 6ba045f (MIPS: Move generated code to .text for microMIPS) causes a panic at boot. The handler builder should test against handle_tlbs_end, not handle_tlbs. Signed-off-by: Tony Wu <tung7970@gmail.com> Acked-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5600/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: BMIPS: Fix thinko to release slave TP from resetFlorian Fainelli1-1/+1
Commit 4df715aa ["MIPS: BMIPS: support booting from physical CPU other than 0"] introduced a thinko which will prevents slave CPUs from being released from reset on systems where we boot from TP0. The problem is that we are checking whether the slave CPU logical CPU map is 0, which is never true for systems booting from TP0, so we do not release the slave TP from reset and we are just stuck. Fix this by properly checking that the CPU we intend to boot really is the physical slave CPU (logical and physical value being 1). Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/5598/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19s390/zcrypt: Alias for new zcrypt device driver base moduleIngo Tuchscherer1-0/+1
The zcrypt device driver has been split into base/bus module, api-module, card modules and message type modules. The base module has been renamed from z90crypt to ap. A module alias (with the well-known z90crypt identifier) will be introduced that enable users to use their existing way to load the zcrypt device driver. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds19-164/+248
Pull networking fixes from David Miller: "A couple interesting SKB fragment handling fixes, plus the usual small bits here and there: 1) Fix 64-bit divide build failure on 32-bit platforms in mlx5, from Tim Gardner. 2) Get rid of a stupid reimplementation on "%*phC" in our sysfs MAC address printing helper. 3) Fix NETIF_F_SG capability advertisement in hyperv driver, if the device can't do checksumming offloads then it shouldn't say it can do SG either. From Haiyang Zhang. 4) bgmac needs to depend on PHYLIB, from Hauke Mehrtens. 5) Don't leak DMA mappings on mapping failures, from Neil Horman. 6) We need to reset the transport header of SKBs in ipv4 before we attempt to perform early socket demux, just like ipv6 does. From Eric Dumazet. 7) Add missing locking on vxlan device removal, from Stephen Hemminger. 8) xen-netfront has to make two passes over an SKB to prepare it for transfer. One pass calculates the number of slots needed, the second massages the SKB and fills the slots. Unfortunately, the first pass doesn't calculate the number of slots properly so we can end up trying to build a MAX_SKB_FRAGS + 1 SKB which doesn't work out so well. Fix from Jan Beulich with help and discussion with several others. 9) Fix a similar problem in tun and macvtap, which have to split up scatter-gather elements at PAGE_SIZE boundaries. Don't do zerocopy if it would result in a > MAX_SKB_FRAGS skb. Fixes from Jason Wang. 10) On receive, once we've decoded the VLAN state completely, clear skb->vlan_tci. Otherwise demuxed tunnels underneath can trigger the VLAN code again, corrupting the packet. Fix from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: vlan: fix a race in egress prio management vlan: mask vlan prio bits macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS pkt_sched: sch_qfq: remove a source of high packet delay/jitter xen-netfront: pull on receive skb may need to happen earlier vxlan: add necessary locking on device removal hyperv: Fix the NETIF_F_SG flag setting in netvsc net: Fix sysfs_format_mac() code duplication. be2net: Fix to avoid hardware workaround when not needed macvtap: do not assume 802.1Q when send vlan packets macvtap: fix the missing ret value of TUNSETQUEUE ipv4: set transport header earlier mlx5 core: Fix __udivdi3 when compiling for 32 bit arches bgmac: add dependency to phylib net/irda: fixed style issues in irlan_eth ethtool: fixed trailing statements in ethtool ndisc: bool initializations should use true and false atl1e: unmap partially mapped skb on dma error and free skb
2013-07-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-34/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Trying again to get the fixes queue, including the fixed IDT alignment patch. The UEFI patch is by far the biggest issue at hand: it is currently causing quite a few machines to boot. Which is sad, because the only reason they would is because their BIOSes touch memory that has already been freed. The other major issue is that we finally have tracked down the root cause of a significant number of machines failing to suspend/resume" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Make sure IDT is page aligned x86, suspend: Handle CPUs which fail to #GP on RDMSR x86/platform/ce4100: Add header file for reboot type Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()" efivars: check for EFI_RUNTIME_SERVICES
2013-07-18Merge tag 'md-3.11-fixes' of git://neil.brown.name/mdLinus Torvalds3-39/+39
Pull md bug fixes from NeilBrown: "Sorry boss, back at work now boss. Here's them nice shiny patches ya wanted. All nicely tagged and justified for -stable and everyfing: Three bug fixes for md in 3.10 3.10 wasn't a good release for md. The bio changes left a couple of bugs, and an md "fix" created another one. These three patches appear to fix the issues and have been tagged for -stable" * tag 'md-3.11-fixes' of git://neil.brown.name/md: md/raid1: fix bio handling problems in process_checks() md: Remove recent change which allows devices to skip recovery. md/raid10: fix two problems with RAID10 resync.
2013-07-18Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds39-277/+918
Pull drm fixes from Dave Airlie: "You'll be terribly disappointed in this, I'm not trying to sneak any features in or anything, its mostly radeon and intel fixes, a couple of ARM driver fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits) drm/radeon/dpm: add debugfs support for RS780/RS880 (v3) drm/radeon/dpm/atom: fix broken gcc harder drm/radeon/dpm/atom: restructure logic to work around a compiler bug drm/radeon/dpm: fix atom vram table parsing drm/radeon: fix an endian bug in atom table parsing drm/radeon: add a module parameter to disable aspm drm/rcar-du: Use the GEM PRIME helpers drm/shmobile: Use the GEM PRIME helpers uvesafb: Really allow mtrr being 0, as documented and warn()ed radeon kms: do not flush uninitialized hotplug work drm/radeon/dpm/sumo: handle boost states properly when forcing a perf level drm/radeon: align VM PTBs (Page Table Blocks) to 32K drm/radeon: allow selection of alignment in the sub-allocator drm/radeon: never unpin UVD bo v3 drm/radeon: fix UVD fence emit drm/radeon: add fault decode function for CIK drm/radeon: add fault decode function for SI (v2) drm/radeon: add fault decode function for cayman/TN (v2) drm/radeon: use radeon device for request firmware drm/radeon: add missing ttm_eu_backoff_reservation to radeon_bo_list_validate ...
2013-07-18vlan: fix a race in egress prio managementEric Dumazet1-0/+7
egress_priority_map[] hash table updates are protected by rtnl, and we never remove elements until device is dismantled. We have to make sure that before inserting an new element in hash table, all its fields are committed to memory or else another cpu could find corrupt values and crash. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-18vlan: mask vlan prio bitsEric Dumazet3-5/+11
In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ("vlan: don't deliver frames for unknown vlans to protocols") Florian made sure we set pkt_type to PACKET_OTHERHOST if the vlan id is set and we could find a vlan device for this particular id. But we also have a problem if prio bits are set. Steinar reported an issue on a router receiving IPv6 frames with a vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device, because skb->vlan_tci is set. Forwarded frame is completely corrupted : We can see (8100:4000) being inserted in the middle of IPv6 source address : 16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 > 9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64 0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651 0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213 0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 It seems we are not really ready to properly cope with this right now. We can probably do better in future kernels : vlan_get_ingress_priority() should be a netdev property instead of a per vlan_dev one. For stable kernels, lets clear vlan_tci to fix the bugs. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-18macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGSJason Wang1-25/+37
We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. This bug were introduced from b92946e2919134ebe2a4083e4302236295ea2a73 (macvtap: zerocopy: validate vectors before building skb). Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 13:54:17 +0000