summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-05-25mm: nommu: fix a potential memory leak in do_mmap_private()Namhyung Kim1-1/+1
If f_op->read() fails and sysctl_nr_trim_pages > 1, there could be a memory leak between @region->vm_end and @region->vm_top. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: nommu: check the vma list when unmapping file-mapped vmaNamhyung Kim1-4/+2
Now we have the sorted vma list, use it in do_munmap() to check that we have an exact match. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: nommu: find vma using the sorted vma listNamhyung Kim1-8/+4
Now we have the sorted vma list, use it in the find_vma[_exact]() rather than doing linear search on the rb-tree. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: nommu: don't scan the vma list when deletingNamhyung Kim1-7/+8
Since commit 297c5eee3724 ("mm: make the vma list be doubly linked") made it a doubly linked list, we don't need to scan the list when deleting @vma. And the original code didn't update the prev pointer. Fix it too. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: nommu: sort mm->mmap list properlyNamhyung Kim4-45/+44
When I was reading nommu code, I found that it handles the vma list/tree in an unusual way. IIUC, because there can be more than one identical/overrapped vmas in the list/tree, it sorts the tree more strictly and does a linear search on the tree. But it doesn't applied to the list (i.e. the list could be constructed in a different order than the tree so that we can't use the list when finding the first vma in that order). Since inserting/sorting a vma in the tree and link is done at the same time, we can easily construct both of them in the same order. And linear searching on the tree could be more costly than doing it on the list, it can be converted to use the list. Also, after the commit 297c5eee3724 ("mm: make the vma list be doubly linked") made the list be doubly linked, there were a couple of code need to be fixed to construct the list properly. Patch 1/6 is a preparation. It maintains the list sorted same as the tree and construct doubly-linked list properly. Patch 2/6 is a simple optimization for the vma deletion. Patch 3/6 and 4/6 convert tree traversal to list traversal and the rest are simple fixes and cleanups. This patch: @vma added into @mm should be sorted by start addr, end addr and VMA struct addr in that order because we may get identical VMAs in the @mm. However this was true only for the rbtree, not for the list. This patch fixes this by remembering 'rb_prev' during the tree traversal like find_vma_prepare() does and linking the @vma via __vma_link_list(). After this patch, we can iterate the whole VMAs in correct order simply by using @mm->mmap list. [akpm@linux-foundation.org: avoid duplicating __vma_link_list()] Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: remove unused zone_idx variable from set_migratetype_isolateSergey Senozhatsky1-2/+0
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Christoph Lameter <cl@linux.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mmap: avoid merging cloned VMAsShaohua Li1-5/+13
Avoid merging a VMA with another VMA which is cloned from the parent process. The cloned VMA shares the anon_vma lock with the parent process's VMA. If we do the merge, more vmas (even the new range is only for current process) use the perent process's anon_vma lock. This introduces scalability issues. find_mergeable_anon_vma() already considers this case. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mmap: avoid unnecessary anon_vma lockShaohua Li1-1/+1
If we only change vma->vm_end, we can avoid taking anon_vma lock even if 'insert' isn't NULL, which is the case of split_vma. As I understand it, we need the lock before because rmap must get the 'insert' VMA when we adjust old VMA's vm_end (the 'insert' VMA is linked to anon_vma list in __insert_vm_struct before). But now this isn't true any more. The 'insert' VMA is already linked to anon_vma list in __split_vma(with anon_vma_clone()) instead of __insert_vm_struct. There is no race rmap can't get required VMAs. So the anon_vma lock is unnecessary, and this can reduce one locking in brk case and improve scalability. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mmap: add alignment for some variablesShaohua Li1-3/+7
Make some variables have correct alignment/section to avoid cache issue. In a workload which heavily does mmap/munmap, the variables will be used frequently. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25arch, mm: filter disallowed nodes from arch specific show_mem functionsDavid Rientjes13-36/+34
Architectures that implement their own show_mem() function did not pass the filter argument to show_free_areas() to appropriately avoid emitting the state of nodes that are disallowed in the current context. This patch now passes the filter argument to show_free_areas() so those nodes are now avoided. This patch also removes the show_free_areas() wrapper around __show_free_areas() and converts existing callers to pass an empty filter. ia64 emits additional information for each node, so skip_free_areas_zone() must be made global to filter disallowed nodes and it is converted to use a nid argument rather than a zone for this use case. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25xtensa/mm: remove WANT_PAGE_VIRTUALSebastian Andrzej Siewior1-4/+0
This is not useful: it provides page->virtual and is used with highmem. xtensa has no support for highmem and those HIGHMEM bits which are found by grep are partly implemented. The interesting functions like kmap() are missing. If someone actually implements the complete HIGHMEM support he could use HASHED_PAGE_VIRTUAL like most others do. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Chris Zankel <chris@zankel.net> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25xtensa/mm: remove pgtable.cSebastian Andrzej Siewior1-72/+0
It is not referenced by any Makefile. pte_alloc_one_kernel() and pte_alloc_one() is implemented in arch/xtensa/include/asm/pgalloc.h. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Chris Zankel <chris@zankel.net> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25drivers/video/backlight/adp5520_bl.c: check strict_strtoul() return valueLiu Yuan1-1/+5
It should check if strict_strtoul() succeeds. [akpm@linux-foundation.org: don't override strict_strtoul() return value] Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: vmscan: correctly check if reclaimer should schedule during shrink_slabMinchan Kim1-2/+7
It has been reported on some laptops that kswapd is consuming large amounts of CPU and not being scheduled when SLUB is enabled during large amounts of file copying. It is expected that this is due to kswapd missing every cond_resched() point because; shrink_page_list() calls cond_resched() if inactive pages were isolated which in turn may not happen if all_unreclaimable is set in shrink_zones(). If for whatver reason, all_unreclaimable is set on all zones, we can miss calling cond_resched(). balance_pgdat() only calls cond_resched if the zones are not balanced. For a high-order allocation that is balanced, it checks order-0 again. During that window, order-0 might have become unbalanced so it loops again for order-0 and returns that it was reclaiming for order-0 to kswapd(). It can then find that a caller has rewoken kswapd for a high-order and re-enters balance_pgdat() without ever calling cond_resched(). shrink_slab only calls cond_resched() if we are reclaiming slab pages. If there are a large number of direct reclaimers, the shrinker_rwsem can be contended and prevent kswapd calling cond_resched(). This patch modifies the shrink_slab() case. If the semaphore is contended, the caller will still check cond_resched(). After each successful call into a shrinker, the check for cond_resched() remains in case one shrinker is particularly slow. [mgorman@suse.de: preserve call to cond_resched after each call into shrinker] Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Colin King <colin.king@canonical.com> Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Chris Mason <chris.mason@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.38+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25mm: vmscan: correct use of pgdat_balanced in sleeping_prematurelyJohannes Weiner1-1/+1
There are a few reports of people experiencing hangs when copying large amounts of data with kswapd using a large amount of CPU which appear to be due to recent reclaim changes. SLUB using high orders is the trigger but not the root cause as SLUB has been using high orders for a while. The root cause was bugs introduced into reclaim which are addressed by the following two patches. Patch 1 corrects logic introduced by commit 1741c877 ("mm: kswapd: keep kswapd awake for high-order allocations until a percentage of the node is balanced") to allow kswapd to go to sleep when balanced for high orders. Patch 2 notes that it is possible for kswapd to miss every cond_resched() and updates shrink_slab() so it'll at least reach that scheduling point. Chris Wood reports that these two patches in isolation are sufficient to prevent the system hanging. AFAIK, they should also resolve similar hangs experienced by James Bottomley. This patch: Johannes Weiner poined out that the logic in commit 1741c877 ("mm: kswapd: keep kswapd awake for high-order allocations until a percentage of the node is balanced") is backwards. Instead of allowing kswapd to go to sleep when balancing for high order allocations, it keeps it kswapd running uselessly. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Colin King <colin.king@canonical.com> Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Chris Mason <chris.mason@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> [2.6.38+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25slub: Fix double bit unlock in debug modeChristoph Lameter1-1/+2
Commit 442b06bcea23 ("slub: Remove node check in slab_free") added a call to deactivate_slab() in the debug case in __slab_alloc(), which unlocks the current slab used for allocation. Going to the label 'unlock_out' then does it again. Also, in the debug case we do not need all the other processing that the 'unlock_out' path does. We always fall back to the slow path in the debug case. So the tid update is useless. Similarly, ALLOC_SLOWPATH would just be incremented for all allocations. Also a pretty useless thing. So simply restore irq flags and return the object. Signed-off-by: Christoph Lameter <cl@linux.com> Reported-and-bisected-by: James Morris <jmorris@namei.org> Reported-by: Ingo Molnar <mingo@elte.hu> Reported-by: Jens Axboe <jaxboe@fusionio.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-24Merge branch 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds8-115/+263
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits) mach-ux500: set proper I2C platform data from MOP500s i2c-nomadik: break out single messsage transmission i2c-nomadik: reset the hw after status check i2c-nomadik: remove the unnecessary delay i2c-nomadik: change the TX and RX threshold i2c-nomadik: add code to retry on timeout failure i2c-nomadik: use pm_runtime API i2c-nomadik: print abort cause only on abort tag i2c-nomadik: correct adapter timeout initialization i2c-nomadik: remove the redundant error message i2c-nomadik: corrrect returned error numbers i2c-nomadik: fix speed enumerator i2c-nomadik: make i2c timeout specific per i2c bus i2c-nomadik: add regulator support i2c: i2c-sh_mobile bus speed platform data V2 i2c: i2c-sh_mobile clock string removal i2c-eg20t: Support new device ML7223 IOH i2c: tegra: Add de-bounce cycles. i2c: tegra: fix repeated start handling i2c: tegra: recover from spurious interrupt storm ...
2011-05-25Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', ↵Ben Dooks5084-325333/+334116
'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c
2011-05-25mach-ux500: set proper I2C platform data from MOP500sLinus Walleij1-6/+8
This specifies the new per-platform timeout per I2C bus and switches the I2C buses to fast mode, and increase the FIFO depth to 8 for reads and writes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: break out single messsage transmissionLinus Walleij1-32/+48
Reduce code size in the message transfer function by factoring out a single-message transfer function. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: reset the hw after status checkVirupax Sadashivpetimath1-4/+4
In case of I2C timeout, reset the HW only after the HW status is read, otherwise the staus will be lost. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: remove the unnecessary delayVirupax Sadashivpetimath1-18/+2
The delay in the driver seems to be not needed, so remove it. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Markus Grape <markus.grape@stericsson.com> Tested-by: Per Persson <per.xb.persson@stericsson.com> Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: change the TX and RX thresholdVirupax Sadashivpetimath1-13/+26
1) Increase RX FIFO threshold so that there is a reduction in the number of interrupts handled to complete a transaction. 2) Fill TX FIFO in the write function. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: add code to retry on timeout failureVirupax Sadashivpetimath1-48/+49
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem, add retries to the on going transfer on failure. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: use pm_runtime APIRabin Vincent1-6/+31
Use the pm_runtime API for pins control. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> [deleted some surplus runtime PM code] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: print abort cause only on abort tagVirupax Sadashivpetimath1-8/+19
Modify the code to: 1)Print the cause of i2c failure only if the status is set to ABORT. 2)Print slave address on send/receive fail, will help in which slave failed. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: correct adapter timeout initializationVirupax Sadashivpetimath1-4/+5
Correct the incorrect initialization of adapter timeout not to be in milliseconds, as it needs to be done in jiffies. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: remove the redundant error messagesrinidhi kasagar1-2/+0
The abort cause string itself is an error, so remove the redundant explicit error message. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: corrrect returned error numbersVirupax Sadashivpetimath1-4/+6
The code was returning bad error numbers or just -1 in some cases. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: fix speed enumeratorLinus Walleij1-1/+1
The I2C speed enumerators in the i2c-nomadik header file were in the wrong order. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: make i2c timeout specific per i2c busVirupax Sadashivpetimath2-8/+8
Add option to have different i2c timeout delay for different i2c buses specified in platform data. Default to the old value unless specified. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: add regulator supportJonas Aberg1-15/+58
This on-chip I2C controller needs to fetch the regulator representing its voltage domain so that it won't be switched off. Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-24Merge branch 'i2c-for-linus' of ↵Linus Torvalds7-83/+97
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-parport: Various cleanups i2c-i801: Don't depend on other kernel driver config options i2c-i801: Check for vendor Fujitsu before probing for apanel i2c-i801: Don't probe for slaves on IDF channels i2c-i801: SMBus patch for Intel Panther Point DeviceIDs i2c/writing-clients: Fix foo_driver.id_table
2011-05-24Merge branch 'for_linus' of ↵Linus Torvalds6-32/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: jbd: Fix comment to match the code in journal_start() jbd/jbd2: remove obsolete summarise_journal_usage. jbd: Fix forever sleeping process in do_get_write_access() ext2: fix error msg when mounting fs with too-large blocksize jbd: fix fsync() tid wraparound bug ext3: Fix fs corruption when make_indexed_dir() fails ext3: Fix lock inversion in ext3_symlink()
2011-05-24Merge branch 'for-linus' of ↵Linus Torvalds9-51/+223
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: make plock operation killable dlm: remove shared message stub for recovery dlm: delayed reply message warning dlm: Remove superfluous call to recalc_sigpending()
2011-05-24Merge branch 'for-linus' of ↵Linus Torvalds39-284/+603
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (43 commits) TOMOYO: Fix wrong domainname validation. SELINUX: add /sys/fs/selinux mount point to put selinuxfs CRED: Fix load_flat_shared_library() to initialise bprm correctly SELinux: introduce path_has_perm flex_array: allow 0 length elements flex_arrays: allow zero length flex arrays flex_array: flex_array_prealloc takes a number of elements, not an end SELinux: pass last path component in may_create SELinux: put name based create rules in a hashtable SELinux: generic hashtab entry counter SELinux: calculate and print hashtab stats with a generic function SELinux: skip filename trans rules if ttype does not match parent dir SELinux: rename filename_compute_type argument to *type instead of *con SELinux: fix comment to state filename_compute_type takes an objname not a qstr SMACK: smack_file_lock can use the struct path LSM: separate LSM_AUDIT_DATA_DENTRY from LSM_AUDIT_DATA_PATH LSM: split LSM_AUDIT_DATA_FS into _PATH and _INODE SELINUX: Make selinux cache VFS RCU walks safe SECURITY: Move exec_permission RCU checks into security modules SELinux: security_read_policy should take a size_t not ssize_t ...
2011-05-24Merge branch 'kbuild' of ↵Linus Torvalds20-108/+287
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o scripts/kallsyms.c: fix potential segfault scripts/gen_initramfs_list.sh: Convert to a /bin/sh script kbuild: Fix GNU make v3.80 compatibility kbuild: Fix passing -Wno-* options to gcc 4.4+ kbuild: move scripts/basic/docproc.c to scripts/docproc.c kbuild: Fix Makefile.asm-generic for um kbuild: Allow to combine multiple W= levels kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0 Fix handling of backlash character in LINUX_COMPILE_BY name kbuild: asm-generic support kbuild: implement several W= levels kbuild: Fix build with binutils <= 2.19 initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros kbuild: Use the deterministic mode of ar kbuild: Call gzip with -n kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile Kconfig: improve KALLSYMS_ALL documentation Fix up trivial conflict in Makefile
2011-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds60-63/+63
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: Make struct pcmcia_device_id const, sound drivers edition staging: pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Make declaration and uses of struct pcmcia_device_id const pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
2011-05-24Merge branch 'drm-core-next' of ↵Linus Torvalds104-4045/+9392
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits) drivers/gpu/drm/radeon/atom.c: fix warning drm/radeon/kms: bump kms version number drm/radeon/kms: properly set num banks for fusion asics drm/radeon/kms/atom: move dig phy init out of modesetting drm/radeon/kms/cayman: fix typo in register mask drm/radeon/kms: fix typo in spread spectrum code drm/radeon/kms: fix tile_config value reported to userspace on cayman. drm/radeon/kms: fix incorrect comparison in cayman setup code. drm/radeon/kms: add wait idle ioctl for eg->cayman drm/radeon/cayman: setup hdp to invalidate and flush when asked drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked agp/uninorth: Fix lockups with radeon KMS and >1x. drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices drm/radeon/kms: fixup eDP connector handling drm/radeon/kms: bail early for eDP in hotplug callback drm/radeon/kms: simplify hotplug handler logic drm/radeon/kms: rewrite DP handling drm/radeon/kms/atom: add support for setting DP panel mode drm/radeon/kms: atombios.h updates for DP panel mode ...
2011-05-24Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds58-1284/+895
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (29 commits) [S390] cpu hotplug: fix external interrupt subclass mask handling [S390] oprofile: dont access lowcore [S390] oprofile: add missing irq stats counter [S390] Ignore sendmmsg system call note wired up warning [S390] s390,oprofile: fix compile error for !CONFIG_SMP [S390] s390,oprofile: fix alert counter increment [S390] Remove unused includes in process.c [S390] get CPC image name [S390] sclp: event buffer dissection [S390] chsc: process channel-path-availability information [S390] refactor page table functions for better pgste support [S390] merge page_test_dirty and page_clear_dirty [S390] qdio: prevent compile warning [S390] sclp: remove unnecessary sendmask check [S390] convert old cpumask API into new one [S390] pfault: cleanup code [S390] pfault: cpu hotplug vs missing completion interrupts [S390] smp: add __noreturn attribute to cpu_die() [S390] percpu: implement arch specific irqsafe_cpu_ops [S390] vdso: disable gcov profiling ...
2011-05-24i2c-parport: Various cleanupsJean Delvare3-59/+55
* Fix white space. * Rename labels to something meaningful. * Prefix defines with PORT_ to avoid collision with macros from <linux/parport.h>. * Add const markers where possible. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24Merge branch 'for-linus' of ↵Linus Torvalds38-359/+2155
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander Input: tsc2007 - add X, Y and Z fuzz factors to platform data Input: tsc2007 - add poll_period parameter to platform data Input: tsc2007 - add poll_delay parameter to platform data Input: tsc2007 - add max_rt parameter to platform data Input: tsc2007 - debounce pressure measurement Input: ad714x - fix captouch wheel option algorithm Input: ad714x - allow platform code to specify irqflags Input: ad714x - fix threshold and completion interrupt masks Input: ad714x - fix up input configuration Input: elantech - remove support for proprietary X driver Input: elantech - report multitouch with proper ABS_MT messages Input: elantech - export pressure and width when supported Input: elantech - describe further the protocol Input: atmel_tsadcc - correct call to input_free_device Input: add driver FSL MPR121 capacitive touch sensor Input: remove useless synchronize_rcu() calls Input: ads7846 - fix gpio_pendown configuration Input: ads7846 - add possibility to use external vref on ads7846 Input: rotary-encoder - add support for half-period encoders ...
2011-05-24i2c-i801: Don't depend on other kernel driver config optionsJean Delvare2-10/+7
Don't let other driver config options influence us, as it makes the code more complex and fragile for a small benefit. There's nothing wrong with instantiating I2C devices even if they don't have a driver. And we're talking about 835 extra bytes in the binary on x86-64, that's hardly worth arguing about. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Woodhouse <david.woodhouse@intel.com> Cc: Hans de Goede <hdegoede@redhat.com>
2011-05-24i2c-i801: Check for vendor Fujitsu before probing for apanelJean Delvare1-1/+2
Scanning the BIOS memory for the apanel information is costly, so avoid doing it on non-Fujitsu machines. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24i2c-i801: Don't probe for slaves on IDF channelsJean Delvare1-15/+31
I don't know if Fujitsu is ever going to produce Patsburg-based machines, but if they do, I'd rather not probe the secondary (IDF) SMBus channels. At least not until we have a good reason for doing so. On a side note, I'm not even sure if it is right to enable detection of HWMON and DDC devices on the IDF channels. Time will tell... Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-24i2c-i801: SMBus patch for Intel Panther Point DeviceIDsSeth Heasley3-1/+5
This patch adds the SMBus controller DeviceID for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24i2c/writing-clients: Fix foo_driver.id_tableVikram Narayanan1-1/+1
The i2c_device_id structure variable's name is not used in the i2c_driver structure. Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-24Merge branch 'for-2.6.40' of ↵Linus Torvalds21-52/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: Unify input section names percpu: Avoid extra NOP in percpu_cmpxchg16b_double percpu: Cast away printk format warning percpu: Always align percpu output section to PAGE_SIZE Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
2011-05-24Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds10-129/+132
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: switch to dynamic printks UBI: turn some macros into static inline UBI: improve checking in debugging prints UBI: fix typo in a message UBI: fix minor stylistic issues UBI: use __packed instead of __attribute__((packed)) UBI: cleanup comments around volume properties UBI: re-name set volume properties ioctl UBI: make the control character device non-seekable
2011-05-24Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds26-934/+1117
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (52 commits) UBIFS: switch to dynamic printks UBIFS: fix kernel-doc comments UBIFS: fix extremely rare mount failure UBIFS: simplify LEB recovery function further UBIFS: always cleanup the recovered LEB UBIFS: clean up LEB recovery function UBIFS: fix-up free space on mount if flag is set UBIFS: add the fixup function UBIFS: add a superblock flag for free space fix-up UBIFS: share the next_log_lnum helper UBIFS: expect corruption only in last journal head LEBs UBIFS: synchronize write-buffer before switching to the next bud UBIFS: remove BUG statement UBIFS: change bud replay function conventions UBIFS: substitute the replay tree with a replay list UBIFS: simplify replay UBIFS: store free and dirty space in the bud replay entry UBIFS: remove unnecessary stack variable UBIFS: double check that buds are replied in order UBIFS: make 2 functions static ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 00:02:10 +0000