summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-08-13Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds13-225/+408
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Thomas Gleixner: - Make lazy TLB mode even lazier to avoid pointless switch_mm() operations, which reduces CPU load by 1-2% for memcache workloads - Small cleanups and improvements all over the place * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Remove redundant check for kmem_cache_create() arm/asm/tlb.h: Fix build error implicit func declaration x86/mm/tlb: Make clear_asid_other() static x86/mm/tlb: Skip atomic operations for 'init_mm' in switch_mm_irqs_off() x86/mm/tlb: Always use lazy TLB mode x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs x86/mm/tlb: Make lazy TLB mode lazier x86/mm/tlb: Restructure switch_mm_irqs_off() x86/mm/tlb: Leave lazy TLB mode at page table free time mm: Allocate the mm_cpumask (mm->cpu_bitmap[]) dynamically based on nr_cpu_ids x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap: Update pgtable free interfaces with addr x86/mm: Disable ioremap free page handling on x86-PAE
2018-08-13Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds3-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Thomas Gleixner: "Trivial cleanups and improvements" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/UV: Remove redundant check of p == q x86/platform/olpc: Use PTR_ERR_OR_ZERO() x86/platform/UV: Mark memblock related init code and data correctly
2018-08-13Merge branch 'x86-cache-for-linus' of ↵Linus Torvalds8-75/+2965
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache QoS (RDT/CAR) updates from Thomas Gleixner: "Add support for pseudo-locked cache regions. Cache Allocation Technology (CAT) allows on certain CPUs to isolate a region of cache and 'lock' it. Cache pseudo-locking builds on the fact that a CPU can still read and write data pre-allocated outside its current allocated area on cache hit. With cache pseudo-locking data can be preloaded into a reserved portion of cache that no application can fill, and from that point on will only serve cache hits. The cache pseudo-locked memory is made accessible to user space where an application can map it into its virtual address space and thus have a region of memory with reduced average read latency. The locking is not perfect and gets totally screwed by WBINDV and similar mechanisms, but it provides a reasonable enhancement for certain types of latency sensitive applications. The implementation extends the current CAT mechanism and provides a generally useful exclusive CAT mode on which it builds the extra pseude-locked regions" * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) x86/intel_rdt: Disable PMU access x86/intel_rdt: Fix possible circular lock dependency x86/intel_rdt: Make CPU information accessible for pseudo-locked regions x86/intel_rdt: Support restoration of subset of permissions x86/intel_rdt: Fix cleanup of plr structure on error x86/intel_rdt: Move pseudo_lock_region_clear() x86/intel_rdt: Limit C-states dynamically when pseudo-locking active x86/intel_rdt: Support L3 cache performance event of Broadwell x86/intel_rdt: More precise L2 hit/miss measurements x86/intel_rdt: Create character device exposing pseudo-locked region x86/intel_rdt: Create debugfs files for pseudo-locking testing x86/intel_rdt: Create resctrl debug area x86/intel_rdt: Ensure RDT cleanup on exit x86/intel_rdt: Resctrl files reflect pseudo-locked information x86/intel_rdt: Support creation/removal of pseudo-locked region x86/intel_rdt: Pseudo-lock region creation/removal core x86/intel_rdt: Discover supported platforms via prefetch disable bits x86/intel_rdt: Add utilities to test pseudo-locked region possibility x86/intel_rdt: Split resource group removal in two x86/intel_rdt: Enable entering of pseudo-locksetup mode ...
2018-08-13Merge branch 'x86-hyperv-for-linus' of ↵Linus Torvalds4-68/+120
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/hyper-v update from Thomas Gleixner: "Add fast hypercall support for guest running on the Microsoft HyperV(isor)" * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyper-v: Fix wrong merge conflict resolution x86/hyper-v: Check for VP_INVAL in hyperv_flush_tlb_others() x86/hyper-v: Check cpumask_to_vpset() return value in hyperv_flush_tlb_others_ex() x86/hyper-v: Trace PV IPI send x86/hyper-v: Use cheaper HVCALL_SEND_IPI hypercall when possible x86/hyper-v: Use 'fast' hypercall for HVCALL_SEND_IPI x86/hyper-v: Implement hv_do_fast_hypercall16 x86/hyper-v: Use cheaper HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} hypercalls when possible
2018-08-13Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds1-19/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 dump printing cleanup from Thomas Gleixner: "Clean up the show_opcodes() printout so nested dumps can be properly differentiated" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Avoid pr_cont() in show_opcodes()
2018-08-13Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds4-22/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Thomas Gleixner: "Two small updates for the CPU code: - Improve NUMA emulation - Add the EPT_AD CPU feature bit" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpufeatures: Add EPT_AD feature bit x86/numa_emulation: Introduce uniform split capability x86/numa_emulation: Fix emulated-to-physical node mapping
2018-08-13Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Thomas Gleixner: "Trival cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/iommu: Use NULL instead of 0 x86/platform/pcspeaker: Use PTR_ERR_OR_ZERO() to fix ptr_ret.cocci warning
2018-08-13Merge branch 'x86-build-for-linus' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build cleanup from Thomas Gleixner: "Remove a stale quirk for a no longer supported GCC version" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Remove old -funit-at-a-time GCC quirk
2018-08-13Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds28-100/+91
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Thomas Gleixner: "The lowlevel and ASM code updates for x86: - Make stack trace unwinding more reliable - ASM instruction updates for better code generation - Various cleanups" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Add two more instruction suffixes x86/asm/64: Use 32-bit XOR to zero registers x86/build/vdso: Simplify 'cmd_vdso2c' x86/build/vdso: Remove unused vdso-syms.lds x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder x86/unwind/orc: Detect the end of the stack x86/stacktrace: Do not fail for ORC with regs on stack x86/stacktrace: Clarify the reliable success paths x86/stacktrace: Remove STACKTRACE_DUMP_ONCE x86/stacktrace: Do not unwind after user regs x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation
2018-08-13Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds3-9/+97
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Thomas Gleixner: "Boot code updates for x86: - Allow to skip a given amount of huge pages for address layout randomization on the kernel command line to prevent regressions in the huge page allocation with small memory sizes - Various cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Use CC_SET()/CC_OUT() instead of open coding it x86/boot/KASLR: Make local variable mem_limit static x86/boot/KASLR: Skip specified number of 1GB huge pages when doing physical randomization (KASLR) x86/boot/KASLR: Add two new functions for 1GB huge pages handling
2018-08-13Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds2-15/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic update from Thomas Gleixner: "Trivial cleanups of the APIC related code" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Trivial coding style fixes x86/vector: Merge allocate_vector() into assign_vector_locked()
2018-08-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds40-451/+790
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timers departement more or less proudly presents: - More Y2038 timekeeping work mostly in the core code. The work is slowly, but steadily targeting the actuall syscalls. - Enhanced timekeeping suspend/resume support by utilizing clocksources which do not stop during suspend, but are otherwise not the main timekeeping clocksources. - Make NTP adjustmets more accurate and immediate when the frequency is set directly and not incrementally. - Sanitize the overrung handing of posix timers - A new timer driver for Mediatek SoCs - The usual pile of fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) clockevents: Warn if cpu_all_mask is used as cpumask tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag timers: Clear timer_base::must_forward_clk with timer_base::lock held clocksource/drivers/sprd: Register one always-on timer to compensate suspend time clocksource/drivers/timer-mediatek: Add support for system timer clocksource/drivers/timer-mediatek: Convert the driver to timer-of clocksource/drivers/timer-mediatek: Use specific prefix for GPT clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek clocksource/drivers/timer-mediatek: Add system timer bindings clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask time: Introduce one suspend clocksource to compensate the suspend time time: Fix extra sleeptime injection when suspend fails timekeeping/ntp: Constify some function arguments ntp: Use kstrtos64 for s64 variable ntp: Remove redundant arguments timer: Fix coding style ktime: Provide typesafe ktime_to_ns() hrtimer: Improve kernel message printing ...
2018-08-13Merge branch 'perf-core-for-linus' of ↵Linus Torvalds133-1867/+2606
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf update from Thomas Gleixner: "The perf crowd presents: Kernel updates: - Removal of jprobes - Cleanup and consolidatation the handling of kprobes - Cleanup and consolidation of hardware breakpoints - The usual pile of fixes and updates to PMUs and event descriptors Tooling updates: - Updates and improvements all over the place. Nothing outstanding, just the (good) boring incremental grump work" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits) perf trace: Do not require --no-syscalls to suppress strace like output perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h perf tools: Allow overriding MAX_NR_CPUS at compile time perf bpf: Show better message when failing to load an object perf list: Unify metric group description format with PMU event description perf vendor events arm64: Update ThunderX2 implementation defined pmu core events perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet perf cs-etm: Fix start tracing packet handling perf build: Fix installation directory for eBPF perf c2c report: Fix crash for empty browser perf tests: Fix indexing when invoking subtests perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg perf trace beauty: Do not print NULL strarray entries perf beauty: Add a generator for IPPROTO_ socket's protocol constants tools include uapi: Grab a copy of linux/in.h perf tests: Fix complex event name parsing perf evlist: Fix error out while applying initial delay and LBR ...
2018-08-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds77-1982/+988
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking/atomics update from Thomas Gleixner: "The locking, atomics and memory model brains delivered: - A larger update to the atomics code which reworks the ordering barriers, consolidates the atomic primitives, provides the new atomic64_fetch_add_unless() primitive and cleans up the include hell. - Simplify cmpxchg() instrumentation and add instrumentation for xchg() and cmpxchg_double(). - Updates to the memory model and documentation" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) locking/atomics: Rework ordering barriers locking/atomics: Instrument cmpxchg_double*() locking/atomics: Instrument xchg() locking/atomics: Simplify cmpxchg() instrumentation locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation tools/memory-model: Rename litmus tests to comply to norm7 tools/memory-model/Documentation: Fix typo, smb->smp sched/Documentation: Update wake_up() & co. memory-barrier guarantees locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock() sched/core: Use smp_mb() in wake_woken_function() tools/memory-model: Add informal LKMM documentation to MAINTAINERS locking/atomics/Documentation: Describe atomic_set() as a write operation tools/memory-model: Make scripts executable tools/memory-model: Remove ACCESS_ONCE() from model tools/memory-model: Remove ACCESS_ONCE() from recipes locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example MAINTAINERS: Add Daniel Lustig as an LKMM reviewer tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name tools/memory-model: Add litmus test for full multicopy atomicity locking/refcount: Always allow checked forms ...
2018-08-13Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug update from Thomas Gleixner: "A trivial name fix for the hotplug state machine" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Clarify CPU hotplug step name for timers
2018-08-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds38-870/+1009
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - Cleanup and improvement of NUMA balancing - Refactoring and improvements to the PELT (Per Entity Load Tracking) code - Watchdog simplification and related cleanups - The usual pile of small incremental fixes and improvements * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) watchdog: Reduce message verbosity stop_machine: Reflow cpu_stop_queue_two_works() sched/numa: Move task_numa_placement() closer to numa_migrate_preferred() sched/numa: Use group_weights to identify if migration degrades locality sched/numa: Update the scan period without holding the numa_group lock sched/numa: Remove numa_has_capacity() sched/numa: Modify migrate_swap() to accept additional parameters sched/numa: Remove unused task_capacity from 'struct numa_stats' sched/numa: Skip nodes that are at 'hoplimit' sched/debug: Reverse the order of printing faults sched/numa: Use task faults only if numa_group is not yet set up sched/numa: Set preferred_node based on best_cpu sched/numa: Simplify load_too_imbalanced() sched/numa: Evaluate move once per node sched/numa: Remove redundant field sched/debug: Show the sum wait time of a task group sched/fair: Remove #ifdefs from scale_rt_capacity() sched/core: Remove get_cpu() from sched_fork() sched/cpufreq: Clarify sugov_get_util() sched/sysctl: Remove unused sched_time_avg_ms sysctl ...
2018-08-13Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single bugfix to prevent a pinned thread which queues stomp machine work to be preempted by the stopper thread on its CPU which causes a live lock as it is unable to wake the second CPUs stopper thread" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stop_machine: Atomically queue and wake stopper threads
2018-08-13Merge branch 'ras-core-for-linus' of ↵Linus Torvalds1-95/+107
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS updates from Thomas Gleixner: "A small set of changes to the RAS core: - Rework of the MCE bank scanning code - Y2038 converion" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Cleanup __mc_scan_banks() x86/mce: Carve out bank scanning code x86/mce: Remove !banks check x86/mce: Carve out the crashing_cpu check x86/mce: Always use 64-bit timestamps
2018-08-13Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds39-1209/+1675
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Thomas Gleixner: "A large update to RCU: Preparatory work for consolidating the RCU flavors: - Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt, and RCU-sched flavors, replacing the old ->gpnum and ->completed pair of fields. This change allows lockless code to obtain the complete grace-period state with a single READ_ONCE(), which is needed to maintain tolerable lock contention during the upcoming consolidation of the three RCU flavors. Note that grace-period sequence numbers are already used by rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus already heavily used and well-tested. Joel Fernandes contributed a number of excellent fixes and improvements. - Clean up some grace-period-reporting loose ends, including improving the handling of quiescent states from offline CPUs and fixing some false-positive WARN_ON_ONCE() invocations. (Strictly speaking, the WARN_ON_ONCE() invocations were quite correct, but their invariants were (harmlessly) violated by the earlier sloppy handling of quiescent states from offline CPUs.) In addition, improve grace-period forward-progress guarantees so as to allow removal of fail-safe checks that required otherwise needless lock acquisitions. Finally, add more diagnostics to help debug the upcoming consolidation of the RCU-bh, RCU-preempt, and RCU-sched flavors. The rest: - SRCU updates - Updates to rcutorture and associated scripting. - The usual pile of miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits) rcutorture: Fix rcu_barrier successes counter rcutorture: Add support to detect if boost kthread prio is too low rcutorture: Use monotonic timestamp for stall detection rcutorture: Make boost test more robust rcutorture: Disable RT throttling for boost tests rcutorture: Emphasize testing of single reader protection type rcutorture: Handle extended read-side critical sections rcutorture: Make rcu_torture_timer() use rcu_torture_one_read() rcutorture: Use per-CPU random state for rcu_torture_timer() rcutorture: Use atomic increment for n_rcu_torture_timers rcutorture: Extract common code from rcu_torture_reader() rcuperf: Remove unused torturing_tasks() function rcu: Remove rcutorture test version and sequence number rcutorture: Change units of onoff_interval to jiffies rcu: Assign higher prio to RCU threads if rcutorture is built-in rculist: Improve documentation for list_for_each_entry_from_rcu() srcu: Add grace-period number to rcutorture statistics printout rcu: Print stall-warning NMI dyntick state in hexadecimal MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries rcu: Make rcu_seq_diff() more exact ...
2018-08-13Merge branch 'irq-core-for-linus' of ↵Linus Torvalds27-202/+251
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull genirq updates from Thomas Gleixner: "The irq departement provides: - A synchronization fix for free_irq() to synchronize just the removed interrupt thread on shared interrupt lines. - Consolidate the multi low level interrupt entry handling and mvoe it to the generic code instead of adding yet another copy for RISC-V - Refactoring of the ARM LPI allocator and LPI exposure to the hypervisor - Yet another interrupt chip driver for the JZ4725B SoC - Speed up for /proc/interrupts as people seem to love reading this file with high frequency - Miscellaneous fixes and updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER arm64: Use the new GENERIC_IRQ_MULTI_HANDLER ARM: Convert to GENERIC_IRQ_MULTI_HANDLER irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices dt-bindings: irqchip: renesas-irqc: Document r8a77980 support dt-bindings: irqchip: renesas-irqc: Document r8a77470 support irqchip/ingenic: Add support for the JZ4725B SoC irqchip/stm32: Add exti0 translation for stm32mp1 genirq: Remove redundant NULL pointer check in __free_irq() irqchip/gic-v3-its: Honor hypervisor enforced LPI range irqchip/gic-v3: Expose GICD_TYPER in the rdist structure irqchip/gic-v3-its: Drop chunk allocation compatibility irqchip/gic-v3-its: Move minimum LPI requirements to individual busses irqchip/gic-v3-its: Use full range of LPIs irqchip/gic-v3-its: Refactor LPI allocator genirq: Synchronize only with single thread on free_irq() genirq: Update code comments wrt recycled thread_mask ...
2018-08-13Merge branch 'efi-core-for-linus' of ↵Linus Torvalds17-451/+626
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Thomas Gleixner: "The EFI pile: - Make mixed mode UEFI runtime service invocations mutually exclusive, as mandated by the UEFI spec - Perform UEFI runtime services calls from a work queue so the calls into the firmware occur from a kernel thread - Honor the UEFI memory map attributes for live memory regions configured by UEFI as a framebuffer. This works around a coherency problem with KVM guests running on ARM. - Cleanups, improvements and fixes all over the place" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efivars: Call guid_parse() against guid_t type of variable efi/cper: Use consistent types for UUIDs efi/x86: Replace references to efi_early->is64 with efi_is_64bit() efi: Deduplicate efi_open_volume() efi/x86: Add missing NULL initialization in UGA draw protocol discovery efi/x86: Merge 32-bit and 64-bit UGA draw protocol setup routines efi/x86: Align efi_uga_draw_protocol typedef names to convention efi/x86: Merge the setup_efi_pci32() and setup_efi_pci64() routines efi/x86: Prevent reentrant firmware calls in mixed mode efi/esrt: Only call efi_mem_reserve() for boot services memory fbdev/efifb: Honour UEFI memory map attributes when mapping the FB efi: Drop type and attribute checks in efi_mem_desc_lookup() efi/libstub/arm: Add opt-in Kconfig option for the DTB loader efi: Remove the declaration of efi_late_init() as the function is unused efi/cper: Avoid using get_seconds() efi: Use a work queue to invoke EFI Runtime Services efi/x86: Use non-blocking SetVariable() for efi_delete_dummy_variable() efi/x86: Clean up the eboot code
2018-08-13Merge branch 'core-debugobjects-for-linus' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects update from Thomas Gleixner: "Two simple updates for the debug objects code: - Make the stack check warning more informative by adding the object and the stack page address to the printout - Remove a redundant NULL pointer check" * 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Remove redundant NULL pointer check debugobjects: Make stack check warning more informative
2018-08-13Merge tag 'm68k-for-v4.19-tag1' of ↵Linus Torvalds42-577/+335
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Enable mac_scsi PDMA on PowerBook 500 - Generic dma_noncoherent_ops conversion - Time handling improvements - I/O accessor improvements - Conversion to MEMBLOCK and NO_BOOTMEM, to bring m68k in line with other mainstream architectures - Miscellaneous fixes and cleanups - Defconfig updates * tag 'm68k-for-v4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.18-rc6 m68k: switch to MEMBLOCK + NO_BOOTMEM m68k/page_no.h: force __va argument to be unsigned long m68k/bitops: convert __ffs to match generic declaration m68k/io: Switch mmu variant to <asm-generic/io.h> m68k/io: Move mem*io define guards to <asm/kmap.h> Input: hilkbd - Add casts to HP9000/300 I/O accessors net: mac8390: Use standard memcpy_{from,to}io() m68k/io: Add missing ioremap define guards, fix typo m68k: Remove unused set_clock_mmss() helpers m68k: mac: Use time64_t in RTC handling m68k: Use generic dma_noncoherent_ops nubus: Set default dma mask for nubus_board devices m68k/mac: Enable PDMA for PowerBook 500 series
2018-08-13Merge branches 'fixes', 'misc' and 'spectre' into for-linusRussell King16-149/+105
Conflicts: arch/arm/include/asm/uaccess.h Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-08-13ARM: 8778/1: clkdev: don't call __of_clk_get_by_name() unnecessarily from ↵Bartosz Golaszewski1-1/+1
clk_get() The way this function is implemented caused some confusion when converting the TI DaVinci platform to using the common clock framework. Current kernel supports booting DaVinci boards both in device tree as well as legacy, board-file mode. In the latter, we always end up calling clk_get_sys() as of_node is NULL and __of_clk_get_by_name() returns -ENOENT. It was not obvious at first glance how clk_get(dev, NULL) will work in board-file mode since we always call __of_clk_get_by_name(). Let's make it clearer by checking if of_node is NULL and skipping right to clk_get_sys(). Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: David Lechner <david@lechnology.com> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-08-13Documentation: remove dynamic-resolution-notes reference to non-existent fileHarish Jenny K N1-3/+2
File dt-object-internal.txt does not exist. This patch removes a reference to it. Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-13Merge tag 'asoc-v4.19' of ↵Takashi Iwai984-6606/+21040
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.19 A fairly big update, including quite a bit of core activity this time around (which is good to see) along with a fairly large set of new drivers. - A new snd_pcm_stop_xrun() helper which is now used in several drivers. - Support for providing name prefixes to generic component nodes. - Quite a few fixes for DPCM as it gains a bit wider use and more robust testing. - Generalization of the DIO2125 support to a simple amplifier driver. - Accessory detection support for the audio graph card. - DT support for PXA AC'97 devices. - Quirks for a number of new x86 systems. - Support for AM Logic Meson, Everest ES7154, Intel systems with RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707.
2018-08-13parisc: Fix and improve kernel stack unwindingHelge Deller10-232/+88
This patchset fixes and improves stack unwinding a lot: 1. Show backward stack traces with up to 30 callsites 2. Add callinfo to ENTRY_CFI() such that every assembler function will get an entry in the unwind table 3. Use constants instead of numbers in call_on_stack() 4. Do not depend on CONFIG_KALLSYMS to generate backtraces. 5. Speed up backtrace generation Make sure you have this patch to GNU as installed: https://sourceware.org/ml/binutils/2018-07/msg00474.html Without this patch, unwind info in the kernel is often wrong for various functions. Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: Remove unnecessary barriers from spinlock.hJohn David Anglin1-6/+2
Now that mb() is an instruction barrier, it will slow performance if we issue unnecessary barriers. The spinlock defines have a number of unnecessary barriers.  The __ldcw() define is both a hardware and compiler barrier.  The mb() barriers in the routines using __ldcw() serve no purpose. The only barrier needed is the one in arch_spin_unlock().  We need to ensure all accesses are complete prior to releasing the lock. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: Remove ordered stores from syscall.SJohn David Anglin1-12/+12
Now that we use a sync prior to releasing the locks in syscall.S, we don't need the PA 2.0 ordered stores used to release some locks.  Using an ordered store, potentially slows the release and subsequent code. There are a number of other ordered stores and loads that serve no purpose.  I have converted these to normal stores. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: prefer _THIS_IP_ and _RET_IP_ statement expressionsNick Desaulniers1-2/+2
As part of the effort to reduce the code duplication between _THIS_IP_ and current_text_addr(), let's consolidate callers of current_text_addr() to use _THIS_IP_. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: Add HAVE_REGS_AND_STACK_ACCESS_API featureHelge Deller3-0/+112
Some parts of the HAVE_REGS_AND_STACK_ACCESS_API feature is needed for the rseq syscall. This patch adds the most important parts, and as long as we don't support kprobes, we should be fine. Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: Drop architecture-specific ENOTSUP defineHelge Deller3-13/+2
parisc is the only Linux architecture which has defined a value for ENOTSUP. All other architectures #define ENOTSUP as EOPNOTSUPP in their libc headers. Having an own value for ENOTSUP which is different than EOPNOTSUPP often gives problems with userspace programs which expect both to be the same. One such example is a build error in the libuv package, as can be seen in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900237. Since we dropped HP-UX support, there is no real benefit in keeping an own value for ENOTSUP. This patch drops the parisc value for ENOTSUP from the kernel sources. glibc needs no patch, it reuses the exported headers. Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: use generic dma_noncoherent_opsChristoph Hellwig4-139/+16
Switch to the generic noncoherent direct mapping implementation. Fix sync_single_for_cpu to do skip the cache flush unless the transfer is to the device to match the more tested unmap_single path which should have the same cache coherency implications. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: always use flush_kernel_dcache_range for DMA cache maintainanceChristoph Hellwig1-3/+3
Current the S/G list based DMA ops use flush_kernel_vmap_range which contains a few UP optimizations, while the rest of the DMA operations uses flush_kernel_dcache_range. The single vs sg operations are supposed to have the same effect, so they should use the same routines. Use the more conservation version for now, but if people more familiar with parisc think the vmap version is generally fine for DMA we should switch all interfaces over to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-13parisc: merge pcx_dma_ops and pcxl_dma_opsChristoph Hellwig4-59/+43
The only difference is that pcxl supports dma coherent allocations, while pcx only supports non-consistent allocations and otherwise fails. But dma_alloc* is not in the fast path, and merging these two allows an easy migration path to the generic dma-noncoherent implementation, so do it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-12Linux 4.18v4.18Linus Torvalds1-1/+1
2018-08-12Merge tag 'scsi-fixes' of ↵Linus Torvalds7-49/+69
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eight fixes. The most important one is the mpt3sas fix which makes the driver work again on big endian systems. The rest are mostly minor error path or checker issues and the vmw_scsi one fixes a performance problem" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management enabled scsi: mpt3sas: Swap I/O memory read value back to cpu endianness scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO scsi: fcoe: drop frames in ELS LOGO error path scsi: fcoe: fix use-after-free in fcoe_ctlr_els_send scsi: qedi: Fix a potential buffer overflow scsi: qla2xxx: Fix memory leak for allocating abort IOCB
2018-08-12init: rename and re-order boot_cpu_state_init()Linus Torvalds3-3/+3
This is purely a preparatory patch for upcoming changes during the 4.19 merge window. We have a function called "boot_cpu_state_init()" that isn't really about the bootup cpu state: that is done much earlier by the similarly named "boot_cpu_init()" (note lack of "state" in name). This function initializes some hotplug CPU state, and needs to run after the percpu data has been properly initialized. It even has a comment to that effect. Except it _doesn't_ actually run after the percpu data has been properly initialized. On x86 it happens to do that, but on at least arm and arm64, the percpu base pointers are initialized by the arch-specific 'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init(). This had some unexpected results, and in particular we have a patch pending for the merge window that did the obvious cleanup of using 'this_cpu_write()' in the cpu hotplug init code: - per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE; + this_cpu_write(cpuhp_state.state, CPUHP_ONLINE); which is obviously the right thing to do. Except because of the ordering issue, it actually failed miserably and unexpectedly on arm64. So this just fixes the ordering, and changes the name of the function to be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu hotplug state, because the core CPU state was supposed to have already been done earlier. Marked for stable, since the (not yet merged) patch that will show this problem is marked for stable. Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-12Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-9/+32
Pull vfs fixes from Al Viro: "A bunch of race fixes, mostly around lazy pathwalk. All of it is -stable fodder, a large part going back to 2013" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make sure that __dentry_kill() always invalidates d_seq, unhashed or not fix __legitimize_mnt()/mntput() race fix mntput/mntput race root dentries need RCU-delayed freeing
2018-08-12xfs: fix a null pointer dereference in xfs_bmap_extents_to_btreeShan Hai1-8/+16
Fuzzing tool reports a write to null pointer error in the xfs_bmap_extents_to_btree, fix it by bailing out on encountering a null pointer. Signed-off-by: Shan Hai <shan.hai@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-08-12xfs: remove b_last_holder & associated macrosEric Sandeen3-23/+2
The old lock tracking infrastructure in xfs using the b_last_holder field seems to only be useful if you can get into the system with a debugger; it seems that the existing tracepoints would be the way to go these days, and this old infrastructure can be removed. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-08-12iomap: Switch to offset_in_page for clarityAndreas Gruenbacher1-10/+10
Instead of open-coding pos & (PAGE_SIZE - 1) and pos & ~PAGE_MASK, use the offset_in_page macro. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-08-12xfs: Close race between direct IO and xfs_break_layouts()Dave Jiang1-5/+4
This patch is the duplicate of ross's fix for ext4 for xfs. If the refcount of a page is lowered between the time that it is returned by dax_busy_page() and when the refcount is again checked in xfs_break_layouts() => ___wait_var_event(), the waiting function xfs_wait_dax_page() will never be called. This means that xfs_break_layouts() will still have 'retry' set to false, so we'll stop looping and never check the refcount of other pages in this inode. Instead, always continue looping as long as dax_layout_busy_page() gives us a page which it found with an elevated refcount. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-08-12Merge branch 'for-next' into for-linusTakashi Iwai1271-9029/+15875
Preparation for 4.19 merge material. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-11blkcg: Make blkg_root_lookup() work for queues in bypass modeBart Van Assche2-11/+6
For legacy queues the only call of blkg_root_lookup() happens after bypass mode has been enabled. Since blkg_lookup() returns NULL for queues in bypass mode, modify the blkg_root_lookup() such that it no longer depends on bypass mode. Rename the function into blk_queue_root_blkg() as suggested by Tejun. Suggested-by: Tejun Heo <tj@kernel.org> Fixes: 6bad9b210a22 ("blkcg: Introduce blkg_root_lookup()") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds11-39/+46
Pull networking fixes from David Miller: "Last bit of straggler fixes... 1) Fix btf library licensing to LGPL, from Martin KaFai lau. 2) Fix error handling in bpf sockmap code, from Daniel Borkmann. 3) XDP cpumap teardown handling wrt. execution contexts, from Jesper Dangaard Brouer. 4) Fix loss of runtime PM on failed vlan add/del, from Ivan Khoronzhuk. 5) xen-netfront caches skb_shinfo(skb) across a __pskb_pull_tail() call, which potentially changes the skb's data buffer, and thus skb_shinfo(). Fix from Juergen Gross" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: xen/netfront: don't cache skb_shinfo() net: ethernet: ti: cpsw: fix runtime_pm while add/kill vlan net: ethernet: ti: cpsw: clear all entries when delete vid xdp: fix bug in devmap teardown code path samples/bpf: xdp_redirect_cpu adjustment to reproduce teardown race easier xdp: fix bug in cpumap teardown code path bpf, sockmap: fix cork timeout for select due to epipe bpf, sockmap: fix leak in bpf_tcp_sendmsg wait for mem path bpf, sockmap: fix bpf_tcp_sendmsg sock error handling bpf: btf: Change tools/lib/bpf/btf to LGPL
2018-08-11xen/netfront: don't cache skb_shinfo()Juergen Gross1-4/+4
skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11Merge branch 'cpsw-runtime-pm-fix'David S. Miller2-15/+12
Grygorii Strashko says: ==================== net: ethernet: ti: cpsw: fix runtime pm while add/del reserved vid Here 2 not critical fixes for: - vlan ale table leak while error if deleting vlan (simplifies next fix) - runtime pm while try to set reserved vlan ==================== Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: ethernet: ti: cpsw: fix runtime_pm while add/kill vlanIvan Khoronzhuk1-4/+7
It's exclusive with normal behaviour but if try to set vlan to one of the reserved values is made, the cpsw runtime pm is broken. Fixes: a6c5d14f5136 ("drivers: net: cpsw: ndev: fix accessing to suspended device") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>