summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-01-28b43-ssb-bridge: Add PCI ID for BCM43XGMichael Buesch1-0/+1
This adds the PCI ID 0x4329 for the BCM43XG. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b44: power down PHY when interface downMiguel Botón1-5/+23
This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted to the 'b44' ssb driver. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: add 'ssb_pcihost_set_power_state' functionMiguel Botón1-0/+7
This patch adds the 'ssb_pcihost_set_power_state' function. This function allows us to set the power state of a PCI device (for example b44 ethernet device). Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add definitions for MAC Control registerMichael Buesch2-22/+28
This adds some definitions for the MAC Control register and uses them. This basically is no functional change. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Remove PIO supportMichael Buesch8-252/+21
Remove b43 PIO support. DMA works well on all supported devices. There's no reason to use PIO. Additionally, new devices don't support PIO in hardware anymore. b43 PIO support is dead and unused code. After applying this patch please do git rm drivers/net/wireless/b43/pio.h git rm drivers/net/wireless/b43/pio.c to remove the main PIO support code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Fix PCMCIA lowlevel register accessMichael Buesch2-29/+45
This fixes lowlevel register access for PCMCIA based devices. The patch also adds a temporary workaround for the device mac address. It simply adds generation of a random address. The real SPROM extraction will follow in another patch. The temporary workaround will be removed then, but for now it's OK. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix chip access validation for new devicesMichael Buesch2-15/+30
This fixes chip access validation for newer devices (4318 and up, I think) This patch fixes probing of a PCMCIA based 4318 device. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Only select allowed TX and RX antennasMichael Buesch3-12/+42
This fixes antenna selection in b43. It adds a sanity check for the antenna numbers we get from mac80211. This patch depends on ssb: Fix extraction of values from SPROM Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Fix extraction of values from SPROMMichael Buesch6-43/+107
This fixes extraction of some values from the SPROM. It mainly fixes extraction of antenna related values, which is needed for another b43 fix sent later. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: fix typo in 'drivers/net/wireless/iwlwifi/Kconfig'Zhu Yi1-2/+2
Based on a patch by Miguel. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Miguel Boton <mboton.lkml@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28prism54: remove questionable down_interruptible usageDaniel Walker1-8/+4
Reviewing the semaphore usage I noticed these down_interruptible calls. Most of these aren't returning anything, so a caller can't tell if the operation completed or not. prism54_wpa_bss_ie_get() returns zero, but it's treated as the function failing which doesn't seem correct. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28Revert "rtl8187: fix tx power reading"John W. Linville1-4/+4
This reverts commit e4128a54d790658ab265c915e5da9153ff74af97. On Sunday 02 December 2007 17:17:51 Michael Wu wrote: > CCK and OFDM power levels are stored in adjacent bytes, not nibbles. > This turns out to be true only for rtl8180. On rtl8187, power levels are indeed stored in nibbles, so this patch is wrong. Please revert this patch. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28misc wireless annotationsAl Viro6-25/+25
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ipw2200: do not byteswap struct ipw_associateAl Viro2-40/+26
keep it little-endian, update places that use its members Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ipw2200 trivial annotationsAl Viro2-94/+90
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28prism54 trivial annotationsAl Viro4-26/+26
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28bcm43xx annotationsAl Viro4-29/+29
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28p54pci: endianness annotations and fixesAl Viro2-10/+10
->ring_control_dma is dma_addr_t, needs conversion to little-endian before __raw_writel()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28hostap: don't mess with mixed-endian even for internal skb queuesAl Viro2-10/+9
Just leave hfa384x_info_frame as-is, don't convert in place. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28hostap annotationsAl Viro11-235/+233
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: last of endianness annotationsAl Viro1-226/+218
sanitize handling of ConfigRid Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: sanitize handling of StatusRidAl Viro1-65/+67
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: sanitize APListRid handlingAl Viro1-12/+11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: sanitize handling of CapabilityRidAl Viro1-63/+69
Don't byteswap any fields, annotate. That has caught a bug, BTW - will be handled in the next patch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: sanitize handling of StatsRidAl Viro1-36/+42
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: sanitize handling of WepKeyRidAl Viro1-39/+33
don't byteswap, update users to match that, annotate. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: sanitize BSSListRid handlingAl Viro1-39/+30
Stop byteswap-in-place in readBSSListRid(), annotate the sucker. BTW, that had immediately found a bug - another codepath fetching the same struct from card did _not_ byteswap, but used ->dBm the same as everything else - host-endian. Fix in the next patch... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28bap_read()/bap_write() work with fixed-endian buffersAl Viro1-27/+29
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: sanitize handling of SSID_ridAl Viro1-54/+49
* store SSID_rid without conversions * sanitize proc_SSID_on_close() (and avoid access past the end of buffer, while we are at it) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: trivial endianness annotationsAl Viro1-25/+26
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ipw2200: ipw_tx_skb() endianness bugAl Viro1-1/+1
We'd just set tfd->u.data.chunk_len[i] to cpu_to_le16(remaining_bytes); passing it to pci_map_single() is a bad idea - it expects host-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ipw2200 fix: ->rt_chbitmask is le16Al Viro1-2/+2
A couple of places forgot cpu_to_le16() in assignments to that field, even though right next to those in other branches of if-else we do it correctly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ipw2200 fix: struct ieee80211_radiotap_header is little-endianAl Viro1-9/+9
some places in driver forget conversions Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ray_cs fixesAl Viro1-41/+26
bugs galore: * 0xf380 instead of htons(ETH_P_AARP), etc. Works only on l-e. * back in 2.3.20 driver got readb() and friends instead of direct dereferencing of iomem. Somebody got too enthusiatic and replaced ntohs(p->mrx_overflow) with ntohs(read(&p->mrx_overflow) without noticing that (a) the sucker is 16bit and (b) that expression can't possibly be portable anyway (hell, on l-e it's always less than 256, on b-e it's always a multiple of 256). Proper fix is swab16(readw(&p->mrx_overflow) taking into account the conversion done by readw() itself. That crap happened in several places; the same fix applies. * untranslate() assumes little-endian almost everywhere, except for the code checking for IPX/AARP packets; there we forgot ntohs(), so that part only works on big-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ipw2100 annotations and fixesAl Viro1-5/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28p54common annotations and fixesAl Viro1-4/+4
* ->exp_id in bootrec_exp_if is __le16; missing conversion in its use * !(x & y) misspelled as !x & y Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28hostap: fix endianness with txdesc->sw_supportAl Viro1-2/+2
it's le32, not le16... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: fix writerids() endiannessAl Viro1-2/+2
in writerids() we do _not_ byteswap, so we want to access ->opmode as little-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo endianness bug: cap_rid.extSoftCapAl Viro1-1/+2
never had been byteswapped, used as host-endian... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: bug in airo_interrupt() handling on incoming 802.11Al Viro1-51/+23
On big-endian we end up with swapped first two bytes in packet, due to earlier conversion to host-endian and forgotten conversion back. The code we calculated that host-endian for had been duplicated several time - it finds the 802.11 MAC header length by the first two bytes of packet; taken into a new helper (header_len(__le16 ctl)). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: fix endianness bug in ->dBm handlingAl Viro1-3/+6
airo_translate_scan() reads BSSListRid directly, does _not_ byteswap and uses ->dBm (__le16) as host-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28airo: fix transmit_802_11_packet()Al Viro1-8/+3
a) gaplen would better be stored little-endian b) for control packets (shorter than 24-byte header) we ended up with bap_write(ai, hdrlen == 30 ? (const u16*)&gap.gaplen : (const u16*)&gap, 38 - hdrlen, BAP1); passing to card the data past the end of gap (i.e. random stuff from stack) and did _not_ feed the gaplen at the right offset. c) sending the contents of uninitialized fields of struct is Not Nice(tm) either Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ieee80211: beacon->capability is little-endianAl Viro1-20/+19
It's only a debugging printk, so it went unnoticed; still, the fix is trivial, so... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ieee80211: fix misannotationsAl Viro4-22/+22
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ieee80211softmac_auth_resp() fixAl Viro1-3/+3
The struct ieee8021_auth * passed to it comes straight from skb->data without any conversions; members of the struct are little-endian, so we'd better take that into account when doing switch by auth->algorithm, etc. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28several missing cpu_to_le16() in ieee80211softmac_capabilities()Al Viro1-5/+5
on some codepaths we forgot to convert to little-endian as we do on the rest of them and as the caller expects from us. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28eliminate byteswapping in struct ieee80211_qos_parametersAl Viro3-57/+48
Make it match the on-the-wire endianness, eliminate byteswapping. The only driver that used this sucker (ipw2200) updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28wireless: cleanup some merge errorsJohn W. Linville2-4/+36
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28[IPV4]: Enable use of 240/4 address space.Jan Engelhardt5-11/+12
This short patch modifies the IPv4 networking to enable use of the 240.0.0.0/4 (aka "class-E") address space as propsed in the internet draft draft-fuller-240space-00.txt. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET] gen_estimator: gen_replace_estimator() cosmetic changesJarek Poplawski1-7/+6
White spaces etc. are changed in gen_replace_estimator() to make it similar to others in a file. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>