| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We can waste a lot of time searching through bitmaps when we are heavily
fragmented trying to find large contiguous areas that don't exist in the bitmap.
So keep track of the max extent size when we do a full search of a bitmap so
that next time around we can just skip the expensive searching if our max size
is less than what we are looking for. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
If we are extremely fragmented then we won't be able to create a free_cluster.
So if this happens set last_ptr->fragmented so that all future allcations will
give up trying to create a cluster. When we unpin extents we will unset
->fragmented if we free up a sufficient amount of space in a block group.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
We try really really hard to make allocations, but sometimes it is just not
going to happen, especially when free space is extremely fragmented. So add a
few short cuts through the looping states. For example if we couldn't allocate
a chunk, just go straight to the NO_EMPTY_SIZE loop. If there are no uncached
block groups and we've done a full search, go straight to the ALLOC_CHUNK stage.
And finally if we already have empty_size and empty_cluster set to 0 go ahead
and return -ENOSPC. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
If we hit ENOSPC when setting up a space cache don't bother setting up any of
the other space cache's in this transaction, it'll just induce unnecessary
latency. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
When we are heavily fragmented we can induce a lot of latency trying to make an
allocation happen that is simply not going to happen. Thankfully we keep track
of our max_extent_size when going through the allocator, so if we get to the
point where we are exiting find_free_extent with ENOSPC then set our
space_info->max_extent_size so we can keep future allocations from having to pay
this cost. We reset the max_extent_size whenever we release pinned bytes back
into this space info so we can redo all the work. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
The space cache needs to have contiguous allocations, and the allocator tries to
make allocations by reducing the amount of bytes requested and re-searching.
But this just makes us waste time when we are very fragmented, so if we can't
find our space just exit, don't bother trying to search again. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
I want to set some per transaction flags, so instead of adding yet another int
lets just convert the current two int indicators to flags and add a flags field
for future use. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
If we are heavily fragmented we will continually try to prealloc the largest
extent size we can every time we call btrfs_reserve_extent. This can be very
expensive when we are heavily fragmented, burning lots of CPU cycles and loops
through the allocator. So instead notice when we get a smaller chunk from the
allocator than what we specified and use this as the new maximum size we try to
allocate. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
In tracking down these weird bitmap problems it was helpful to artificially
create an extremely fragmented file system. These mount options let us either
fragment data or metadata or both. With these options I could reproduce all
sorts of weird latencies and hangs that occur under extreme fragmentation and
get them fixed. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
With my changes to allow us to find old roots when resolving indirect refs I
introduced a regression to the sanity tests. Since we don't really care to go
down into the fs roots we just need to have the old behavior of returning ENOENT
for dummy roots for the sanity tests. In the future if we want to get fancy we
can populate the test fs trees with the references as well. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
We have a mechanism to make sure we don't lose updates for ordered extents that
were logged in the transaction that is currently running. We add the ordered
extent to a transaction list and then the transaction waits on all the ordered
extents in that list. However are substantially large file systems this list
can be extremely large, and can give us soft lockups, since the ordered extents
don't remove themselves from the list when they do complete.
To fix this we simply add a counter to the transaction that is incremented any
time we have a logged extent that needs to be completed in the current
transaction. Then when the ordered extent finally completes it decrements the
per transaction counter and wakes up the transaction if we are the last ones.
This will eliminate the softlockup. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.4
|
|
reada is using -1 instead of the -ENOMEM defined macro to specify that
a buffer allocation failed. Since the error number is propagated, the
caller will get a -EPERM which is the wrong error condition.
Also, updating the caller to return the exact value from
reada_add_block.
Smatch tool warning:
reada_add_block() warn: returning -1 instead of -ENOMEM is sloppy
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
check-integrity is using -1 instead of the -ENOMEM defined macro to
specify that a buffer allocation failed. Since the error number is
propagated, the caller will get a -EPERM which is the wrong error
condition.
Also, the smatch tool complains with the following warnings:
btrfsic_process_superblock() warn: returning -1 instead of -ENOMEM is sloppy
btrfsic_read_block() warn: returning -1 instead of -ENOMEM is sloppy
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
cache friendly
Below variables are defined per compress type.
- struct list_head comp_idle_workspace[BTRFS_COMPRESS_TYPES]
- spinlock_t comp_workspace_lock[BTRFS_COMPRESS_TYPES]
- int comp_num_workspace[BTRFS_COMPRESS_TYPES]
- atomic_t comp_alloc_workspace[BTRFS_COMPRESS_TYPES]
- wait_queue_head_t comp_workspace_wait[BTRFS_COMPRESS_TYPES]
BTW, while accessing one compress type of these variables, the next or
before address is other compress types of it.
So this patch puts these variables in a struct to make cache friendly.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch eliminates the last item of prop_handlers array which is used
to check end of array and instead uses ARRAY_SIZE macro.
Though this is a very tiny optimization, using ARRAY_SIZE macro is a
good practice to iterate array.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Just fix a typo in the code comment.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
rsv_count ultimately gets passed to start_transaction() which
now takes an unsigned int as its num_items parameter.
The value of rsv_count should always be positive so declare it
as being unsigned.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The value of num_items that start_transaction() ultimately
always takes is a small one, so a 64 bit integer is overkill.
Also change num_items for btrfs_start_transaction() and
btrfs_start_transaction_lflush() as well.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Improve readability by generalizing the profile validity checks.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The commit b37392ea86761 ("Btrfs: cleanup unnecessary parameter
and variant of prepare_pages()") makes it redundant.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Shan Hai <haishan.bai@hotmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_raid_array[] holds attributes of all raid types.
Use btrfs_raid_array[].devs_min is best way for request
in btrfs_reduce_alloc_profile(), instead of use complex
condition of each raid types.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_raid_array[] is used to define all raid attributes, use it
to get tolerated_failures in btrfs_get_num_tolerated_disk_barrier_failures(),
instead of complex condition in function.
It can make code simple and auto-support other possible raid-type in
future.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This array is used to record attributes of each raid type,
make it public, and many functions will benifit with this array.
For example, num_tolerated_disk_barrier_failures(), we can
avoid complex conditions in this function, and get raid attribute
simply by accessing above array.
It can also make code logic simple, reduce duplication code, and
increase maintainability.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Rather than have three separate if() statements for the same outcome
we should just OR them together in the same if() statement.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use memset() to null out the btrfs_delayed_ref_root of
btrfs_transaction instead of setting all the members to 0 by hand.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can safely iterate whole list items, without using list_del macro.
So remove the list_del call.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is no removing list element while iterating over list.
So, replace list_for_each_entry_safe to list_for_each_entry.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Just call kmem_cache_zalloc() instead of calling kmem_cache_alloc().
We're just initializing most fields to 0, false and NULL later on
_anyway_, so to make the code mode readable and potentially gain
a bit of performance (completely untested claim), we should fill our
btrfs_trans_handle with zeros on allocation then just initialize
those five remaining fields (not counting the list_heads) as normal.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
old_len is used to store the return value of btrfs_item_size_nr().
The return value of btrfs_item_size_nr() is of type u32.
To improve code correctness and avoid mixing signed and unsigned
integers I've changed old_len to be of type u32 as well.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The return values of btrfs_item_offset_nr and btrfs_item_size_nr are of
type u32. To avoid mixing signed and unsigned integers we should also
declare dsize and last_off to be of type u32.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
integer constants
btrfs_submit_bio_hook() uses integer constants instead of values from "enum
btrfs_wq_endio_type". Fix this.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When truncating a file to a smaller size which consists of an inline
extent that is compressed, we did not discard (or made unusable) the
data between the new file size and the old file size, wasting metadata
space and allowing for the truncated data to be leaked and the data
corruption/loss mentioned below.
We were also not correctly decrementing the number of bytes used by the
inode, we were setting it to zero, giving a wrong report for callers of
the stat(2) syscall. The fsck tool also reported an error about a mismatch
between the nbytes of the file versus the real space used by the file.
Now because we weren't discarding the truncated region of the file, it
was possible for a caller of the clone ioctl to actually read the data
that was truncated, allowing for a security breach without requiring root
access to the system, using only standard filesystem operations. The
scenario is the following:
1) User A creates a file which consists of an inline and compressed
extent with a size of 2000 bytes - the file is not accessible to
any other users (no read, write or execution permission for anyone
else);
2) The user truncates the file to a size of 1000 bytes;
3) User A makes the file world readable;
4) User B creates a file consisting of an inline extent of 2000 bytes;
5) User B issues a clone operation from user A's file into its own
file (using a length argument of 0, clone the whole range);
6) User B now gets to see the 1000 bytes that user A truncated from
its file before it made its file world readbale. User B also lost
the bytes in the range [1000, 2000[ bytes from its own file, but
that might be ok if his/her intention was reading stale data from
user A that was never supposed to be public.
Note that this contrasts with the case where we truncate a file from 2000
bytes to 1000 bytes and then truncate it back from 1000 to 2000 bytes. In
this case reading any byte from the range [1000, 2000[ will return a value
of 0x00, instead of the original data.
This problem exists since the clone ioctl was added and happens both with
and without my recent data loss and file corruption fixes for the clone
ioctl (patch "Btrfs: fix file corruption and data loss after cloning
inline extents").
So fix this by truncating the compressed inline extents as we do for the
non-compressed case, which involves decompressing, if the data isn't already
in the page cache, compressing the truncated version of the extent, writing
the compressed content into the inline extent and then truncate it.
The following test case for fstests reproduces the problem. In order for
the test to pass both this fix and my previous fix for the clone ioctl
that forbids cloning a smaller inline extent into a larger one,
which is titled "Btrfs: fix file corruption and data loss after cloning
inline extents", are needed. Without that other fix the test fails in a
different way that does not leak the truncated data, instead part of
destination file gets replaced with zeroes (because the destination file
has a larger inline extent than the source).
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
rm -f $seqres.full
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
# Create our test files. File foo is going to be the source of a clone operation
# and consists of a single inline extent with an uncompressed size of 512 bytes,
# while file bar consists of a single inline extent with an uncompressed size of
# 256 bytes. For our test's purpose, it's important that file bar has an inline
# extent with a size smaller than foo's inline extent.
$XFS_IO_PROG -f -c "pwrite -S 0xa1 0 128" \
-c "pwrite -S 0x2a 128 384" \
$SCRATCH_MNT/foo | _filter_xfs_io
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 256" $SCRATCH_MNT/bar | _filter_xfs_io
# Now durably persist all metadata and data. We do this to make sure that we get
# on disk an inline extent with a size of 512 bytes for file foo.
sync
# Now truncate our file foo to a smaller size. Because it consists of a
# compressed and inline extent, btrfs did not shrink the inline extent to the
# new size (if the extent was not compressed, btrfs would shrink it to 128
# bytes), it only updates the inode's i_size to 128 bytes.
$XFS_IO_PROG -c "truncate 128" $SCRATCH_MNT/foo
# Now clone foo's inline extent into bar.
# This clone operation should fail with errno EOPNOTSUPP because the source
# file consists only of an inline extent and the file's size is smaller than
# the inline extent of the destination (128 bytes < 256 bytes). However the
# clone ioctl was not prepared to deal with a file that has a size smaller
# than the size of its inline extent (something that happens only for compressed
# inline extents), resulting in copying the full inline extent from the source
# file into the destination file.
#
# Note that btrfs' clone operation for inline extents consists of removing the
# inline extent from the destination inode and copy the inline extent from the
# source inode into the destination inode, meaning that if the destination
# inode's inline extent is larger (N bytes) than the source inode's inline
# extent (M bytes), some bytes (N - M bytes) will be lost from the destination
# file. Btrfs could copy the source inline extent's data into the destination's
# inline extent so that we would not lose any data, but that's currently not
# done due to the complexity that would be needed to deal with such cases
# (specially when one or both extents are compressed), returning EOPNOTSUPP, as
# it's normally not a very common case to clone very small files (only case
# where we get inline extents) and copying inline extents does not save any
# space (unlike for normal, non-inlined extents).
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Now because the above clone operation used to succeed, and due to foo's inline
# extent not being shinked by the truncate operation, our file bar got the whole
# inline extent copied from foo, making us lose the last 128 bytes from bar
# which got replaced by the bytes in range [128, 256[ from foo before foo was
# truncated - in other words, data loss from bar and being able to read old and
# stale data from foo that should not be possible to read anymore through normal
# filesystem operations. Contrast with the case where we truncate a file from a
# size N to a smaller size M, truncate it back to size N and then read the range
# [M, N[, we should always get the value 0x00 for all the bytes in that range.
# We expected the clone operation to fail with errno EOPNOTSUPP and therefore
# not modify our file's bar data/metadata. So its content should be 256 bytes
# long with all bytes having the value 0xbb.
#
# Without the btrfs bug fix, the clone operation succeeded and resulted in
# leaking truncated data from foo, the bytes that belonged to its range
# [128, 256[, and losing data from bar in that same range. So reading the
# file gave us the following content:
#
# 0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
# *
# 0000200 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a
# *
# 0000400
echo "File bar's content after the clone operation:"
od -t x1 $SCRATCH_MNT/bar
# Also because the foo's inline extent was not shrunk by the truncate
# operation, btrfs' fsck, which is run by the fstests framework everytime a
# test completes, failed reporting the following error:
#
# root 5 inode 257 errors 400, nbytes wrong
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
If when reading a page we find a hole and our caller had already locked
the range (bio flags has the bit EXTENT_BIO_PARENT_LOCKED set), we end
up unlocking the hole's range and then later our caller unlocks it
again, which might have already been locked by some other task once
the first unlock happened.
Currently this can only happen during a call to the extent_same ioctl,
as it's the only caller of __do_readpage() that sets the bit
EXTENT_BIO_PARENT_LOCKED for bio flags.
Fix this by leaving the unlock exclusively to the caller.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
Currently the clone ioctl allows to clone an inline extent from one file
to another that already has other (non-inlined) extents. This is a problem
because btrfs is not designed to deal with files having inline and regular
extents, if a file has an inline extent then it must be the only extent
in the file and must start at file offset 0. Having a file with an inline
extent followed by regular extents results in EIO errors when doing reads
or writes against the first 4K of the file.
Also, the clone ioctl allows one to lose data if the source file consists
of a single inline extent, with a size of N bytes, and the destination
file consists of a single inline extent with a size of M bytes, where we
have M > N. In this case the clone operation removes the inline extent
from the destination file and then copies the inline extent from the
source file into the destination file - we lose the M - N bytes from the
destination file, a read operation will get the value 0x00 for any bytes
in the the range [N, M] (the destination inode's i_size remained as M,
that's why we can read past N bytes).
So fix this by not allowing such destructive operations to happen and
return errno EOPNOTSUPP to user space.
Currently the fstest btrfs/035 tests the data loss case but it totally
ignores this - i.e. expects the operation to succeed and does not check
the we got data loss.
The following test case for fstests exercises all these cases that result
in file corruption and data loss:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_need_to_be_root
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
_require_btrfs_fs_feature "no_holes"
_require_btrfs_mkfs_feature "no-holes"
rm -f $seqres.full
test_cloning_inline_extents()
{
local mkfs_opts=$1
local mount_opts=$2
_scratch_mkfs $mkfs_opts >>$seqres.full 2>&1
_scratch_mount $mount_opts
# File bar, the source for all the following clone operations, consists
# of a single inline extent (50 bytes).
$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
| _filter_xfs_io
# Test cloning into a file with an extent (non-inlined) where the
# destination offset overlaps that extent. It should not be possible to
# clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo data after clone operation:"
# All bytes should have the value 0xaa (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo
$XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io
# Test cloning the inline extent against a file which has a hole in its
# first 4K followed by a non-inlined extent. It should not be possible
# as well to clone the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "File foo2 data after clone operation:"
# All bytes should have the value 0x00 (clone operation failed and did
# not modify our file).
od -t x1 $SCRATCH_MNT/foo2
$XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io
# Test cloning the inline extent against a file which has a size of zero
# but has a prealloc extent. It should not be possible as well to clone
# the inline extent from file bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3
# Doing IO against any range in the first 4K of the file should work.
# Due to a past clone ioctl bug which allowed cloning the inline extent,
# these operations resulted in EIO errors.
echo "First 50 bytes of foo3 after clone operation:"
# Should not be able to read any bytes, file has 0 bytes i_size (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo3
$XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size not greater than the size of
# bar's inline extent (40 < 50).
# It should be possible to do the extent cloning from bar to this file.
$XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4
# Doing IO against any range in the first 4K of the file should work.
echo "File foo4 data after clone operation:"
# Must match file bar's content.
od -t x1 $SCRATCH_MNT/foo4
$XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io
# Test cloning the inline extent against a file which consists of a
# single inline extent that has a size greater than the size of bar's
# inline extent (60 > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
| _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5
# Reading the file should not fail.
echo "File foo5 data after clone operation:"
# Must have a size of 60 bytes, with all bytes having a value of 0x03
# (the clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo5
# Test cloning the inline extent against a file which has no extents but
# has a size greater than bar's inline extent (16K > 50).
# It should not be possible to clone the inline extent from file bar
# into this file.
$XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6
# Reading the file should not fail.
echo "File foo6 data after clone operation:"
# Must have a size of 16K, with all bytes having a value of 0x00 (the
# clone operation failed and did not modify our file).
od -t x1 $SCRATCH_MNT/foo6
# Test cloning the inline extent against a file which has no extents but
# has a size not greater than bar's inline extent (30 < 50).
# It should be possible to clone the inline extent from file bar into
# this file.
$XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7
# Reading the file should not fail.
echo "File foo7 data after clone operation:"
# Must have a size of 50 bytes, with all bytes having a value of 0xbb.
od -t x1 $SCRATCH_MNT/foo7
# Test cloning the inline extent against a file which has a size not
# greater than the size of bar's inline extent (20 < 50) but has
# a prealloc extent that goes beyond the file's size. It should not be
# possible to clone the inline extent from bar into this file.
$XFS_IO_PROG -f -c "falloc -k 0 1M" \
-c "pwrite -S 0x88 0 20" \
$SCRATCH_MNT/foo8 | _filter_xfs_io
$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8
echo "File foo8 data after clone operation:"
# Must have a size of 20 bytes, with all bytes having a value of 0x88
# (the clone operation did not modify our file).
od -t x1 $SCRATCH_MNT/foo8
_scratch_unmount
}
echo -e "\nTesting without compression and without the no-holes feature...\n"
test_cloning_inline_extents
echo -e "\nTesting with compression and without the no-holes feature...\n"
test_cloning_inline_extents "" "-o compress"
echo -e "\nTesting without compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" ""
echo -e "\nTesting with compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" "-o compress"
status=0
exit
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
This fixes a regression introduced by 37b8d27d between v4.1 and v4.2.
When a snapshot is received, its received_uuid is set to the original
uuid of the subvolume. When that snapshot is then resent to a third
filesystem, it's received_uuid is set to the second uuid
instead of the original one. The same was true for the parent_uuid.
This behaviour was partially changed in 37b8d27d, but in that patch
only the parent_uuid was taken from the real original,
not the uuid itself, causing the search for the parent to fail in
the case below.
This happens for example when trying to send a series of linked
snapshots (e.g. created by snapper) from the backup file system back
to the original one.
The following commands reproduce the issue in v4.2.1
(no error in 4.1.6)
# setup three test file systems
for i in 1 2 3; do
truncate -s 50M fs$i
mkfs.btrfs fs$i
mkdir $i
mount fs$i $i
done
echo "content" > 1/testfile
btrfs su snapshot -r 1/ 1/snap1
echo "changed content" > 1/testfile
btrfs su snapshot -r 1/ 1/snap2
# works fine:
btrfs send 1/snap1 | btrfs receive 2/
btrfs send -p 1/snap1 1/snap2 | btrfs receive 2/
# ERROR: could not find parent subvolume
btrfs send 2/snap1 | btrfs receive 3/
btrfs send -p 2/snap1 2/snap2 | btrfs receive 3/
Signed-off-by: Robin Ruede <rruede+git@gmail.com>
Fixes: 37b8d27de5d0 ("Btrfs: use received_uuid of parent during send")
Cc: stable@vger.kernel.org # v4.2+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Ed Tomlinson <edt@aei.ca>
|
|
If we have a file that shares an extent with other files, when processing
the extent item relative to a shared extent, we blindly issue a clone
operation that will target a length matching the length in the extent item
and uses as a source some other file the receiver already has and points
to the same extent. However that range in the other file might not
exclusively point only to the shared extent, and so using that length
will result in the receiver getting a file with different data from the
one in the send snapshot. This issue happened both for incremental and
full send operations.
So fix this by issuing clone operations with lengths that don't cover
regions of the source file that point to different extents (or have holes).
The following test case for fstests reproduces the problem.
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
_require_cp_reflink
_require_xfs_io_command "fpunch"
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
# Create our test file with a single 100K extent.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 100K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Clone our file into a new file named bar.
cp --reflink=always $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Now overwrite parts of our foo file.
$XFS_IO_PROG -c "pwrite -S 0xbb 50K 10K" \
-c "pwrite -S 0xcc 90K 10K" \
-c "fpunch 70K 10k" \
$SCRATCH_MNT/foo | _filter_xfs_io
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/snap
echo "File digests in the original filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
_run_btrfs_util_prog send $SCRATCH_MNT/snap -f $send_files_dir/1.snap
# Now recreate the filesystem by receiving the send stream and verify
# we get the same file contents that the original filesystem had.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
# We expect the destination filesystem to have exactly the same file
# data as the original filesystem.
# The btrfs send implementation had a bug where it sent a clone
# operation from file foo into file bar covering the whole [0, 100K[
# range after creating and writing the file foo. This was incorrect
# because the file bar now included the updates done to file foo after
# we cloned foo to bar, breaking the COW nature of reflink copies
# (cloned extents).
echo "File digests in the new filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
status=0
exit
Another test case that reproduces the problem when we have compressed
extents:
seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1 # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15
_cleanup()
{
rm -fr $send_files_dir
rm -f $tmp.*
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_need_to_be_root
_require_cp_reflink
send_files_dir=$TEST_DIR/btrfs-test-$seq
rm -f $seqres.full
rm -fr $send_files_dir
mkdir $send_files_dir
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
# Create our file with an extent of 100K starting at file offset 0K.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 100K" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Rewrite part of the previous extent (its first 40K) and write a new
# 100K extent starting at file offset 100K.
$XFS_IO_PROG -c "pwrite -S 0xbb 0K 40K" \
-c "pwrite -S 0xcc 100K 100K" \
$SCRATCH_MNT/foo | _filter_xfs_io
# Our file foo now has 3 file extent items in its metadata:
#
# 1) One covering the file range 0 to 40K;
# 2) One covering the file range 40K to 100K, which points to the first
# extent we wrote to the file and has a data offset field with value
# 40K (our file no longer uses the first 40K of data from that
# extent);
# 3) One covering the file range 100K to 200K.
# Now clone our file foo into file bar.
cp --reflink=always $SCRATCH_MNT/foo $SCRATCH_MNT/bar
# Create our snapshot for the send operation.
_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT \
$SCRATCH_MNT/snap
echo "File digests in the original filesystem:"
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
_run_btrfs_util_prog send $SCRATCH_MNT/snap -f $send_files_dir/1.snap
# Now recreate the filesystem by receiving the send stream and verify we
# get the same file contents that the original filesystem had.
# Btrfs send used to issue a clone operation from foo's range
# [80K, 140K[ to bar's range [40K, 100K[ when cloning the extent pointed
# to by foo's second file extent item, this was incorrect because of bad
# accounting of the file extent item's data offset field. The correct
# range to clone from should have been [40K, 100K[.
_scratch_unmount
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount "-o compress"
_run_btrfs_util_prog receive $SCRATCH_MNT -f $send_files_dir/1.snap
echo "File digests in the new filesystem:"
# Must match the digests we got in the original filesystem.
md5sum $SCRATCH_MNT/snap/foo | _filter_scratch
md5sum $SCRATCH_MNT/snap/bar | _filter_scratch
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.4
Signed-off-by: Chris Mason <clm@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.4
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Fix a long standing state race in finish_task_switch()"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix TASK_DEAD race in finish_task_switch()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Glexiner:
"Fix build breakage on powerpc in perf tools"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix build break on powerpc due to sample_reg_masks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull maintainer email update from Thomas Gleixner:
"Change Matt Fleming's email address in the maintainers file"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Change Matt Fleming's email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three trivial commits:
- Fix a kerneldoc regression
- Export handle_bad_irq to unbreak a driver in next
- Add an accessor for the of_node field so refactoring in next does
not depend on merge ordering"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Add an accessor for the of_node field
genirq: Fix handle_bad_irq kerneldoc comment
genirq: Export handle_bad_irq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three bug fixes, two of which are regressions from
recent updates (the 3ware one from 4.1 and the device handler fixes
from 4.2)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
3w-9xxx: don't unmap bounce buffered commands
scsi_dh: Use the correct module name when loading device handler
libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop
|
|
Pull md bugfix from Neil Brown:
"One bug fix for raid1/raid10.
Very careless bug earler in 4.3-rc, now fixed :-)"
* tag 'md/4.3-rc4-fix' of git://neil.brown.name/md:
crash in md-raid1 and md-raid10 due to incorrect list manipulation
|
|
My Intel email address will soon expire. Replace it with my
personal address so people still know where to send patches.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1444494136-10333-1-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB and PHY fixes and quirk updates for 4.3-rc5.
Nothing major here, full details in the shortlog, and all of these
have been in linux-next for a while"
* tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: Add device quirk for Logitech PTZ cameras
USB: chaoskey read offset bug
USB: Add reset-resume quirk for two Plantronics usb headphones.
usb: renesas_usbhs: Add support for R-Car H3
usb: renesas_usbhs: fix build warning if 64-bit architecture
usb: gadget: bdc: fix memory leak
phy: berlin-sata: Fix module autoload for OF platform driver
phy: rockchip-usb: power down phy when rockchip phy probe
phy: qcom-ufs: fix build error when the component is built as a module
|
