summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-05-23NFSv4: Fix a race in the net namespace mount notificationTrond Myklebust3-3/+29
Since the struct nfs_client gets added to the global nfs_client_list before it is initialised, it is possible that rpc_pipefs_event can end up trying to create idmapper entries on such a thing. The solution is to have the mount notification wait for the initialisation of each nfs_client to complete, and then to skip any entries for which the it failed. Reported-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
2012-05-23NFSv4.1: Fix session initialisation racesTrond Myklebust4-67/+54
Session initialisation is not complete until the lease manager has run. We need to ensure that both nfs4_init_session and nfs4_init_ds_session do so, and that they check for any resulting errors in clp->cl_cons_state. Only after this is done, can nfs4_ds_connect check the contents of clp->cl_exchange_flags. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com>
2012-05-22NFS: EXCHANGE_ID should save the server major and minor IDChuck Lever5-7/+28
Save the server major and minor ID results from EXCHANGE_ID, as they are needed for detecting server trunking. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Add nfs_client behavior flagsChuck Lever4-27/+26
"noresvport" and "discrtry" can be passed to nfs_create_rpc_client() by setting flags in the passed-in nfs_client. This change makes it easy to add new flags. Note that these settings are now "sticky" over the lifetime of a struct nfs_client, and may even be copied when an nfs_client is cloned. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Refactor nfs_get_client(): initialize nfs_clientChuck Lever3-37/+46
Clean up: Continue to rationalize the locking in nfs_get_client() by moving the logic that handles the case where a matching server IP address is not found. When we support server trunking detection, client initialization may return a different nfs_client struct than was passed to it. Change the synopsis of the init_client methods to return an nfs_client. The client initialization logic in nfs_get_client() is not much more than a wrapper around ->init_client. It's simpler to keep the little bits of error handling in the version-specific init_client methods. No behavior change is expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Refactor nfs_get_client(): add nfs_found_client()Chuck Lever1-30/+37
Clean up: Code that takes and releases nfs_client_lock remains in nfs_get_client(). Logic that handles a pre-existing nfs_client is moved to a separate function. No behavior change is expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Always use the same SETCLIENTID boot verifierChuck Lever5-11/+18
Currently our NFS client assigns a unique SETCLIENTID boot verifier for each server IP address it knows about. It's set to CURRENT_TIME when the struct nfs_client for that server IP is created. During the SETCLIENTID operation, our client also presents an nfs_client_id4 string to servers, as an identifier on which the server can hang all of this client's NFSv4 state. Our client's nfs_client_id4 string is unique for each server IP address. An NFSv4 server is obligated to wipe all NFSv4 state associated with an nfs_client_id4 string when the client presents the same nfs_client_id4 string along with a changed SETCLIENTID boot verifier. When our client unmounts the last of a server's shares, it destroys that server's struct nfs_client. The next time the client mounts that NFS server, it creates a fresh struct nfs_client with a fresh boot verifier. On seeing the fresh verifer, the server wipes any previous NFSv4 state associated with that nfs_client_id4. However, NFSv4.1 clients are supposed to present the same nfs_client_id4 string to all servers. And, to support Transparent State Migration, the same nfs_client_id4 string should be presented to all NFSv4.0 servers so they recognize that migrated state for this client belongs with state a server may already have for this client. (This is known as the Uniform Client String model). If the nfs_client_id4 string is the same but the boot verifier changes for each server IP address, SETCLIENTID and EXCHANGE_ID operations from such a client could unintentionally result in a server wiping a client's previously obtained lease. Thus, if our NFS client is going to use a fixed nfs_client_id4 string, either for NFSv4.0 or NFSv4.1 mounts, our NFS client should use a boot verifier that does not change depending on server IP address. Replace our current per-nfs_client boot verifier with a per-nfs_net boot verifier. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Force server to drop NFSv4 stateChuck Lever3-4/+21
nfs4_reset_all_state() refreshes the boot verifier a server sees to trigger that server to wipe this client's state. This function is invoked when an NFSv4.1 server reports that it has revoked some or all of a client's NFSv4 state. To facilitate server trunking discovery, we will eventually want to move the cl_boot_time field to a more global structure. The Uniform Client String model (and specifically, server trunking detection) requires that all servers see the same boot verifier until the client actually does reboot, and not a fresh verifier every time the client unmounts and remounts the server. Without the cl_boot_time field, however, nfs4_reset_all_state() will have to find some other way to force the server to purge the client's NFSv4 state. Because these verifiers are opaque (ie, the server doesn't know or care that they happen to be timestamps), we can force the server to wipe NFSv4 state by updating the boot verifier as we do now, then immediately afterwards establish a fresh client ID using the old boot verifier again. Hopefully there are no extra paranoid server implementations that keep track of the client's boot verifiers and prevent clients from reusing a previous one. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Remove nfs_unique_idChuck Lever1-5/+0
Clean up: this structure is unused. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Clean up return code checking in nfs4_proc_exchange_id()Chuck Lever1-8/+8
Clean up: update to use matching types in "if" expressions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Use proper naming conventions for the nfs_client.net fieldChuck Lever5-16/+16
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Introduced by commit e50a7a1a "NFS: make NFS client allocated per network namespace context," Tue Jan 10, 2012. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Use proper naming conventions for nfs_client.impl_id fieldChuck Lever4-10/+10
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Additionally, for consistency, move the impl_id field into the NFSv4- specific part of the nfs_client, and free that memory in the logic that shuts down NFSv4 nfs_clients. Introduced by commit 7d2ed9ac "NFSv4: parse and display server implementation ids," Fri Feb 17, 2012. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Use proper naming conventions for NFSv4.1 server scope fieldsChuck Lever5-14/+16
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Additionally, for consistency, move the scope field into the NFSv4- specific part of the nfs_client, and free that memory in the logic that shuts down NFSv4 nfs_clients. Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April 1 2009. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Fix comment misspelling in struct nfs_client definitionChuck Lever1-1/+1
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Add NFSDBG_STATEChuck Lever3-1/+4
fs/nfs/nfs4state.c does not yet have any dprintk() call sites, and I'm about to introduce some. We will need a new flag for enabling them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Don't swap bytes in nfs4_construct_boot_verifier()Chuck Lever1-2/+2
The SETCLIENTID boot verifier is opaque to NFSv4 servers, thus there is no requirement for byte swapping before the client puts the verifier on the wire. This treatment is similar to other timestamp-based verifiers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFS: Fix compiler warningsBryan Schumaker1-6/+4
The "struct inode *inode" was only used in a dprintk, so compiling with CONFIG_SUNRPC_DEBUG off triggers a warning. To get around this, I remove the "struct inode *inode" variable and instead change the dprintk()s to use hdr->inode instead. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFSv4.1 skip rpc_call_done only on disconnected DS slot_table_waitq tasksAndy Adamson1-2/+4
We reset all I/O on a disconnected data server through the pgio layer indicated by the NFS_IOHDR_REDO flag. Differentiate between on-the-wire tasks returning with an error which must call rpc_call_done and tasks woken from the data server slot_table_waitq waiting for a session slot with a status of zero which call rpc_exit in rpc_prepare and need to skip rpc_call_done. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFSv4.1 Just use nfs_put_client in filelayout releaseAndy Adamson1-10/+2
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFSv4.1 fix null state reference in filelayout_async_handle_errorAndy Adamson1-3/+3
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-22NFSv4.1: Fix a bad reference count issue in the pNFS commit codeTrond Myklebust1-0/+1
filelayout_scan_commit_lists needs to bump the reference count on the struct nfs_page just like nfs_scan_commit_list(). Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-21Merge branch 'bugfixes' into nfs-for-nextTrond Myklebust477-2783/+4377
2012-05-19NFSv4.1 resend LAYOUTGET on data server invalid layout errorsAndy Adamson4-4/+39
The "invalid layout" class of errors is handled by destroying the layout and getting a new layout from the server. Currently, the layout must be destroyed before a new layout can be obtained. This means that all references (e.g.lsegs) to the "to be destroyed" layout header must be dropped before it can be destroyed. This in turn means waiting for all in flight RPC's using the old layout as well as draining the data server session slot table wait queue. Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for the old layout to be destroyed. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 dereference a disconnected data server client recordAndy Adamson3-0/+24
When the last DS io is processed, the data server client record will be freed. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 ref count nfs_client across filelayout data server ioAndy Adamson1-5/+21
Prepare to put a dis-connected DS client record. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 send layoutreturn to fence disconnected data serverAndy Adamson2-0/+3
Let the MDS know that you are redirecting I/O from pNFS to MDS. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 wake up all tasks on un-connected DS slot table waitqAndy Adamson1-0/+2
The DS has a connection error (invalid deviceid). Drain the fore channel slot table waitq. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 Check invalid deviceid upon slot table waitq wakeupAndy Adamson1-0/+20
Tasks sleeping on the slot table waitq wake to the rpc_prepare_task state. Reset the task for io through the MDS if the deviceid is invalid. The reset functions put the io pages through the pageio layer which has the advantage of re-coalescing which allows for the MDS and DS having different r/wsizes. Exit the awakened task without executing the rpc_call_done routine. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 remove nfs4_reset_write and nfs4_reset_readAndy Adamson2-37/+0
Replaced by filelayout_reset_write and filelayout_reset_read Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1: mark deviceid invalid on filelayout DS connection errorsAndy Adamson4-35/+108
This prevents the use of any layout for i/o that references the deviceid. I/O is redirected through the MDS. Redirect the unhandled failed I/O to the MDS without marking either the layout or the deviceid invalid. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 data server timeo and retrans module parametersAndy Adamson4-11/+30
Set the recovery parameters for data servers. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 set RPC_TASK_SOFTCONN for filelayout DS RPC callsAndy Adamson4-16/+19
RPC_TASK_SOFTCONN returns connection errors to the caller which allows the pNFS file layout to quickly try the MDS or perhaps another DS. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1 cleanup filelayout invalid layout handlingAndy Adamson1-22/+6
The invalid layout bits are should only be used to block LAYOUTGETs. Do not invalidate a layout on deviceid invalidation. Do not invalidate a layout on un-handled READ, WRITE, COMMIT errors. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19NFSv4.1: cleanup filelayout invalid deviceid handlingAndy Adamson3-40/+28
Move the invalid deviceid test into nfs4_fl_prepare_ds, called by the filelayout read, write, and commit routines. NFS4_DEVICE_ID_NEG_ENTRY is no longer needed. Remove redundant printk's - filelayout_mark_devid_invalid prints a KERN_WARNING. An invalid device prevents pNFS io. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19Fixed goto readability in nfs_update_inode.Matthew Treinish1-17/+16
Simplified error gotos to make it slightly easier to read, it doesn't affect the functionality of the routine. Signed-off-by: Matthew Treinish <treinish@linux.vnet.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-19sunrpc: fix loss of task->tk_status after rpc_delay call in xprt_alloc_slotTrond Myklebust2-2/+5
xprt_alloc_slot will call rpc_delay() to make the task wait a bit before retrying when it gets back an -ENOMEM error from xprt_dynamic_alloc_slot. The problem is that rpc_delay will clear the task->tk_status, causing call_reserveresult to abort the task. The solution is simply to let call_reserveresult handle the ENOMEM error directly. Reported-by: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org [>= 3.1] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-16sunrpc: suppress page allocation warnings in xprt_alloc_slot()Jeff Layton1-1/+1
It's easily possible for these allocations to fail since we're using GFP_NOWAIT here. We don't want to spam the logs with warnings about that though. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-16NFS: fix unsigned comparison in nfs4_create_sec_clientBenny Halevy1-1/+1
fs/nfs/nfs4namespace.c: In function ‘nfs4_create_sec_client’: fs/nfs/nfs4namespace.c:171:2: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] Introduced by commit 72de53ec4bca39c26709122a8f78bfefe7b6bca4 "NFS: Do secinfo as part of lookup" Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-16NFS: Fix a compile issue when CONFIG_NFS_FSCACHE was undefinedTrond Myklebust2-6/+8
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-16rpc_pipefs: clear write bit from top level rpc_pipefs directoryJeff Layton1-1/+1
We can't create new files or directories here from userspace, so let's not pretend that this directory is writable. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14sunrpc: fix kernel-doc warningsRandy Dunlap2-5/+5
Fix kernel-doc warnings in sunrpc/rpc_pipe.c and sunrpc/rpcb_clnt.c: Warning(net/sunrpc/rpcb_clnt.c:428): No description found for parameter 'net' Warning(net/sunrpc/rpcb_clnt.c:567): No description found for parameter 'net' Warning(net/sunrpc/rpc_pipe.c:133): No description found for parameter 'pipe' Warning(net/sunrpc/rpc_pipe.c:133): Excess function parameter 'inode' description in 'rpc_queue_upcall' Warning(net/sunrpc/rpc_pipe.c:839): No description found for parameter 'pipe' Warning(net/sunrpc/rpc_pipe.c:839): Excess function parameter 'ops' description in 'rpc_mkpipe_dentry' Warning(net/sunrpc/rpc_pipe.c:839): Excess function parameter 'flags' description in 'rpc_mkpipe_dentry' Warning(net/sunrpc/rpc_pipe.c:949): No description found for parameter 'dentry' Warning(net/sunrpc/rpc_pipe.c:949): Excess function parameter 'clnt' description in 'rpc_remove_client_dir' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: kmalloc() doesn't return an ERR_PTR()Dan Carpenter1-7/+3
Obviously we should check for NULL here instead of IS_ERR(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org [3.4] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Turn v3 on by defaultBryan Schumaker1-0/+1
Most users will use NFS v3 or possibly v4 so this makes it easier for them. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Make v2 configurableBryan Schumaker3-4/+27
With this patch NFS v2 can be disabled during Kconfig. I default the option to "y" to match the current behavior. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Create an NFS v3 stat_to_errno()Bryan Schumaker3-20/+87
In theory, NFS v3 can have different error versions than NFS v2. v4 is already using its own nfs4_stat_to_errno() to map error codes, so rather than create something in the generic client for v2 and v3 to share I instead give v3 its own function. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Pass mntfh as part of the nfs_mount_info structureBryan Schumaker1-76/+31
This allows me to use the filehandle allocated in nfs_fs_mount() for nfs v4 mounts instead of allocating a new one. Rather than change nfs4_mount() to look almost exactly like nfs_fs_mount(), I instead remove the function. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Allocate parsed mount data directly to the nfs_mount_info structureBryan Schumaker1-9/+7
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Create a single nfs_validate_mount_data() functionBryan Schumaker1-6/+30
This new function chooses between the v2/3 parser and the v4 parser by filesystem type. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Create a single function for text mount dataBryan Schumaker2-81/+71
The v2/3 and v4 cases were very similar, with just a few parameters changed. This makes it easy to share code. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-14NFS: Create a new nfs_try_mount()Bryan Schumaker1-19/+27
This function returns the same same return type as nfs4_try_mount() so they two can be more easily substituted. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-05 19:55:45 +0000