summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-05-13myri10ge: fix the number of interrupt slotsBrice Goglin1-9/+5
Fix a long-standing bug/misunderstanding between the driver and the firmware. The size of the interrupt queue must be set to the number of rx slots (big + small), and it should never have been a tunable. Setting it too small results in chaos. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: cleanup retrieving of firmware capabilitiesBrice Goglin1-11/+31
Add myri10ge_get_firmware_capabilities() to retrieve TSO6 and interrupt slots capabilities from the firmware. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: move data structures into a single sliceBrice Goglin1-278/+316
To prepare and simplify multislice rx support, add a single slice structure and move some fields in there. No functional change yet. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: fix potential infinite loop in enable_ecrcBrice Goglin1-2/+3
Fix another potential for an infinite loop while looking for the root port in myri10ge_enable_ecrc(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: trivial formatting fixBrice Goglin1-1/+4
Add some blank lines to uniformize the code and match the upstream code. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: add barrier in myri10ge_send_cmdBrice Goglin1-1/+3
Add a barrier() in the usleep() loop in myri10ge_send_cmd(). Without the barrier, some mips machine never notices that the firmware has DMA'ed the response. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: report FIBER in ethtool for XFP based NICBrice Goglin1-0/+35
Make ethtool report FIBER for XFP based NIC's port type. Don't bother to poke around and try to find out what is in the XFP cage, since Linux does not have separate media types for -SR -LR, etc. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: properly align scratch buffersBrice Goglin1-2/+2
Properly align scratch buffers when making boot commands. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: increase and fix handoff timeoutBrice Goglin1-2/+2
Increase the handoff timeout to 512ms so as to give the aeluros based NICs sufficient time to handoff without relying on the msleep() being sloppy, and accidentally sleeping way longer than the 20ms we specified in 20 separate 1ms sleeps. Fix typo in the handoff sleep delay, which made it additive, not exponential. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: fix module parameter descriptionsBrice Goglin1-17/+18
Remove useless linebreaks at the end of MODULE_PARM_DESC and fix the description of myri10ge_lro_max_pkts. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13myri10ge: update firmware headersBrice Goglin2-31/+64
Update myri10ge firmware headers. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13atl1: bump version numberJay Cliburn4-5/+5
atl1-2.1.3. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13atl1: add shutdown callbackJay Cliburn1-2/+9
Add a shutdown callback that points to atl1_suspend(). This, along with a working suspend function, fixes wake-on-lan. Tested-by: Per Olofsson <pelle@dsv.su.se> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13atl1: fix broken suspend and resumeJay Cliburn1-45/+80
Fix atl1_suspend() and atl1_resume() so they actually work. We'll use the suspend function for wake-on-lan in addition to just suspending. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13atl1: add PHY power save modeJay Cliburn2-11/+11
Using vendor-provided magic, add code to enter power save mode on the PHY. We'll need this for suspend and wake-on-lan. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-12Merge branch 'master' of ↵David S. Miller21-79/+133
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-05-12mac80211: add missing newlines in printk()Pavel Roskin2-4/+5
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12PS3: gelic: fix memory leakMasakazu Mokuno1-0/+2
This fixes the bug that the I/O buffer is not freed at the driver removal. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12mac80211: fix association with some APsHelmut Schaa1-14/+50
Some APs refuse association if the supported rates contained in the association request do not match its own supported rates. This patch introduces a new function which builds the intersection between the AP's supported rates and the client's supported rates to work around such problems. The same approach is already used in ipw2200 for example. Signed-off-by: Helmut Schaa <hschaa@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12iwlwifi: Fix frequency in rx_status fillEmmanuel Grumbach2-2/+2
This patch fixes a bug in RX path, the frequency was wrongly set in the ieee80211_rx_status. This bug led to an empty scan list in A band. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12zd1211rw: fix potential use-after-free bugJohannes Berg1-1/+5
zd_mac_tx_to_dev() could potentially free the skb, or hand it off to mac80211 which might free it. Hence, this code needs to get the usb pointer out of skb->cb before handing it off to that function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12Fix potential scheduling while atomic in mesh_path_add.Pavel Emelyanov1-1/+2
Calling synchronize_rcu() under write-lock-ed pathtbl_resize_lock may result in this warning (and other side effects). It looks safe just dropping this lock before calling synchronize_rcu. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12Fix not checked kmalloc() result.Pavel Emelyanov1-1/+7
The new_node kmallocation is not checked for success, so add this check. BTW, it also happens under the read_lock. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12Fix GFP_KERNEL allocation under read lock.Pavel Emelyanov1-3/+3
The mesh_path_add() read-locks the pathtbl_resize_lock and calls kmalloc with GFP_KERNEL mask. Fix it and move the endadd2 label lower. It should be _before_ the if() beyond, but it makes no sense for it being there, so I move it right after this if(). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12mac80211: mesh hwmp: fix kfree(skb)Patrick McHardy1-1/+1
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12mac80211: fix access to null skbLuis Carlos Cobo1-3/+3
Without this patch, if xmit_skb is null but net_ratelimit() returns 0 we would go to the else branch and access the null xmit_skb. Pointed out by Johannes Berg. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12mac80211: fix incorrect mesh header lengthLuis Carlos Cobo2-6/+6
This should have been updated at the same time we were transitioning from 3 byte to 4 byte mesh sequence number. Pointed out by Johannes Berg. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12mac80211: Don't encrypt beaconsIvo van Doorn1-0/+1
mac80211 should set the IEEE80211_TX_CTL_DO_NOT_ENCRYPT flag in tx_control structure to inform drivers not to encrypt the beacon. Drivers that only check for that flag before accessing the hw_key field, will otherwise cause a NULL pointer dereference since that field is not configured for beacons. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12rt2x00: Clean up error handling of PCI queue DMA allocation.Ivo van Doorn1-2/+3
When, for some reason, the rt2x00pci module fails to allocate DMA memory for the queues, it tries to undo the complete initialization of the PCI device, including freeing of the irq. This results in the following error in dmesg, as the irq hadn't been requested yet: [ 78.123456] Trying to free already-free IRQ 17 Fix this by implementing proper error handling code, instead of just using the full uninitialization function. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12rt2x00: Fix broken recover-on-error pathIvo van Doorn1-7/+4
During initialization the initialize() callback function in rt2x00pci and rt2x00usb will cleanup the mess they made. rt2x00lib shouldn't call uninitialize because the callback function already cleaned up _and_ the DEVICE_INITIALIZED isn't set which causes the rt2x00lib_uninitialize() to halt directly anyway. All that is required to be cleaned up by rt2x00lib is the queue, and that can be done by calling rt2x00queue_uninitialize() directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12rt2x00: Don't use pskb_expand_head()Ivo van Doorn1-20/+11
rt2x00pci allocates DMA for descriptor and data, rt61pci doesn't use this for the beacon, but it can use the descriptor part as temporary buffer instead of using pskb_expand_head(). Using this temporary buffer is obviously much better then reallocating the skb buffer... At the same time we can set the data length for the beacon queue at 0, to make sure no DMA is allocated for data (but just for the descriptor). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12iwlwifi: fix compile error when CONFIG_MAC80211_DEBUGFS is not selectedZhu Yi1-1/+1
Make iwl4965_lq_sta->drv available even without CONFIG_MAC80211_DEBUGFS. Signed-off-by: Yi Zhu <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12mac80211: fix debugfs default key oopsJohannes Berg1-3/+12
Under certain circumstances (in AP mode) the debugfs function that is supposed to add the default key symlink can encounter a NULL default_key pointer. This patch makes it handle that situtation gracefully. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12wavelan: avoid index past end of array if DEBUG_SHOW_UNUSED is definedJohn W. Linville2-6/+4
Reported by Daniel Marjamäki <danielm77@spray.se> here: http://bugzilla.kernel.org/show_bug.cgi?id=10588 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12fix irq flags in mac80211 codeSteven Rostedt1-2/+2
A file in the net/mac80211 directory uses "int" for flags. This can cause hard to find bugs on some architectures. This patch converts the flags to use "long" instead. This bug was discovered by doing an allyesconfig make on the -rt kernel where checks are done to ensure all flags are of size sizeof(long). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12prism54: fix regression with missing carrier in AP-modeLuis R. Rodriguez1-2/+9
This fixes a regression introduced by commit 7b463ced6 (prism54: set carrier flags correctly) which causes the device to come up without a carrier in AP-mode. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12pppol2tp: Remove null pointer dereference.Julia Lawall1-3/+10
If session is NULL, it is not possible to access its name field. So I have split apart the printing of the error message to drop the printing of the name field in this case. The macro PRINTK actually only evaluates its arguments starting with the third one if the bitwise conjunction of the first two is non-zero. Normally, this conjunction would only be non-zero if debugging mode were turned on, but when session is NULL, the first argument in both the old and new code is -1, and thus the bitwise conjunction is true. Perhaps a different strategy is desired, such as using tunnel->debug, which session->debug is initialized to, but tunnel can also be NULL, so this does not completely solve the problem. This problem was found using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E, E1; identifier f; statement S1,S2,S3; @@ * if (E == NULL) { ... when != if (E == NULL) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12syncppp: Fix crashes.David S. Miller8-18/+21
The syncppp layer wants a mid-level netdev private pointer. It was using netdev->priv but that only worked by accident, and thus this scheme was broken when the device private allocation strategy changed. Add a proper mid-layer private pointer for uses like this, update syncppp and all users, and remove the HDLC_PPP broken tag from drivers/net/wan/Kconfig Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12sctp: Add address type check while process paramaters of ASCONF chunkWei Yongjun1-0/+13
If socket is create by AF_INET type, add IPv6 address to asoc will cause kernel panic while packet is transmitted on that transport. This patch add address type check before process paramaters of ASCONF chunk. If peer is not support this address type, return with error invald parameter. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12sctp: Do not enable peer IPv6 address support on PF_INET socketWei Yongjun1-1/+2
If socket is create by PF_INET type, it can not used IPv6 address to send/recv DATA, So we can not used IPv6 address even if peer tell us it support IPv6 address. This patch fix to only enabled peer IPv6 address support on PF_INET6 socket. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12niu: Determine the # of ports from the card's VPD dataMatheos Worku2-32/+30
Determine the number of physical ports from the card's VPD data. Previous fix failed on Maramba platform which doesn't have the "board-model" property. This fix uses the "model" property which exists on all cards and Neptune based motherboards. cstyle cleanup included. Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08sit: Add missing kfree_skb() on pskb_may_pull() failure.David S. Miller1-1/+1
Noticed by Paul Marks <paul@pmarks.net>. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08tipc: Increase buffer header to support worst-case deviceAllan Stephens1-6/+5
This patch increases the headroom TIPC reserves in each sk_buff to accommodate the largest possible link level device header. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08net: Added ASSERT_RTNL() to dev_open() and dev_close().Ben Hutchings1-0/+4
dev_open() and dev_close() must be called holding the RTNL, since they call device functions and netdevice notifiers that are promised the RTNL. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08can: Fix can_send() handling on dev_queue_xmit() failuresOliver Hartkopp1-4/+12
The tx packet counting and the local loopback of CAN frames should only happen in the case that the CAN frame has been enqueued to the netdevice tx queue successfully. Thanks to Andre Naujoks <nautsch@gmail.com> for reporting this issue. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Urs Thuermann <urs@isnogud.escape.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08Merge branch 'upstream-davem' of ↵David S. Miller32-390/+1193
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-05-08netns: Fix arbitrary net_device-s corruptions on net_ns stop.Pavel Emelyanov1-3/+5
When a net namespace is destroyed, some devices (those, not killed on ns stop explicitly) are moved back to init_net. The problem, is that this net_ns change has one point of failure - the __dev_alloc_name() may be called if a name collision occurs (and this is easy to trigger). This allocator performs a likely-to-fail GFP_ATOMIC allocation to find a suitable number. Other possible conditions that may cause error (for device being ns local or not registered) are always false in this case. So, when this call fails, the device is unregistered. But this is *not* the right thing to do, since after this the device may be released (and kfree-ed) improperly. E. g. bridges require more actions (sysfs update, timer disarming, etc.), some other devices want to remove their private areas from lists, etc. I. e. arbitrary use-after-free cases may occur. The proposed fix is the following: since the only reason for the dev_change_net_namespace to fail is the name generation, we may give it a unique fall-back name w/o %d-s in it - the dev<ifindex> one, since ifindexes are still unique. So make this change, raise the failure-case printk loglevel to EMERG and replace the unregister_netdevice call with BUG(). [ Use snprintf() -DaveM ] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol ↵Patrick McHardy1-0/+4
config values When conntrack and DCCP/SCTP protocols are enabled, chances are good that people also want DCCP/SCTP conntrack and NAT support. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last ↵Patrick McHardy2-9/+14
request Some Inovaphone PBXs exhibit very stange behaviour: when dialing for example "123", the device sends INVITE requests for "1", "12" and "123" back to back. The first requests will elicit error responses from the receiver, causing the SIP helper to flush the RTP expectations even though we might still see a positive response. Note the sequence number of the last INVITE request that contained a media description and only flush the expectations when receiving a negative response for that sequence number. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08macvlan: Fix memleak on device removal/crash on module removalPatrick McHardy1-1/+1
As noticed by Ben Greear, macvlan crashes the kernel when unloading the module. The reason is that it tries to clean up the macvlan_port pointer on the macvlan device itself instead of the underlying device. A non-NULL pointer is taken as indication that the macvlan_handle_frame_hook is valid, when receiving the next packet on the underlying device it tries to call the NULL hook and crashes. Clean up the macvlan_port on the correct device to fix this. Signed-off-by; Patrick McHardy <kaber@trash.net> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 11:33:01 +0000