summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-01-26cpufreq: Add support for x86 cpuinfo auto loading v4Andi Kleen15-61/+142
This marks all the x86 cpuinfo tables to the CPU specific device drivers, to allow auto loading by udev. This should simplify the distribution startup scripts for this greatly. I didn't add MODULE_DEVICE_IDs to the centrino and p4-clockmod drivers, because those probably shouldn't be auto loaded and the acpi driver be used instead (not fully sure on that, would appreciate feedback) The old nforce drivers autoload based on the PCI ID. ACPI cpufreq is autoloaded in another patch. v3: Autoload gx based on PCI IDs only. Remove cpu check (Dave Jones) v4: Use newly introduce HW_PSTATE feature for powernow-k8 loading Cc: Dave Jones <davej@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26X86: Introduce HW-Pstate scattered cpuid featureThomas Renninger2-0/+2
It is rather similar to CPB (boot capability) feature and exists since fam10h (can be looked up in AMD's BKDG). The feature is needed for powernow-k8 to cleanup init functions and to provide proper autoloading matching with the new x86cpu modalias feature. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Jones <davej@redhat.com> Cc: Borislav Petkov <bp@amd64.org> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26HWMON: Convert coretemp to x86 cpuid autoprobingAndi Kleen1-3/+14
Use the new x86 cpuid autoprobe interface for the Intel coretemp driver. Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26HWMON: Convert via-cputemp to x86 cpuid autoprobingAndi Kleen1-5/+11
Use the new x86 cpuid autoprobe interface. Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26ACPI: Load acpi-cpufreq from processor driver automaticallyAndi Kleen3-0/+24
The only left over hole in automatic cpufreq driver loading was the loading of ACPI cpufreq. This driver should be loaded when ACPI supports a _PDC method and the CPU vendor wants to use acpi cpufreq. Simply add a request module call to the acpi processor core driver when this is true. This seems like the simplest solution for this. Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26intel-idle: convert to x86_cpu_id auto probingAndi Kleen1-50/+66
With this it should be automatically loaded on suitable systems by udev. The old switch () is replaced with a table based approach, this also cleans up the code. Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26crypto: Add support for x86 cpuid auto loading for x86 crypto driversAndi Kleen5-19/+41
Add support for auto-loading of crypto drivers based on cpuid features. This enables auto-loading of the VIA and Intel specific drivers for AES, hashing and CRCs. Requires the earlier infrastructure patch to add x86 modinfo. I kept it all in a single patch for now. I dropped the printks when the driver cpuid doesn't match (imho drivers never should print anything in such a case) One drawback is that udev doesn't know if the drivers are used or not, so they will be unconditionally loaded at boot up. That's better than not loading them at all, like it often happens. Cc: Dave Jones <davej@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jen Axboe <axboe@kernel.dk> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26Add driver auto probing for x86 features v4Andi Kleen6-1/+165
There's a growing number of drivers that support a specific x86 feature or CPU. Currently loading these drivers currently on a generic distribution requires various driver specific hacks and it often doesn't work. This patch adds auto probing for drivers based on the x86 cpuid information, in particular based on vendor/family/model number and also based on CPUID feature bits. For example a common issue is not loading the SSE 4.2 accelerated CRC module: this can significantly lower the performance of BTRFS which relies on fast CRC. Another issue is loading the right CPUFREQ driver for the current CPU. Currently distributions often try all all possible driver until one sticks, which is not really a good way to do this. It works with existing udev without any changes. The code exports the x86 information as a generic string in sysfs that can be matched by udev's pattern matching. This scheme does not support numeric ranges, so if you want to handle e.g. ranges of model numbers they have to be encoded in ASCII or simply all models or families listed. Fixing that would require changing udev. Another issue is that udev will happily load all drivers that match, there is currently no nice way to stop a specific driver from being loaded if it's not needed (e.g. if you don't need fast CRC) But there are not that many cpu specific drivers around and they're all not that bloated, so this isn't a particularly serious issue. Originally this patch added the modalias to the normal cpu sysdevs. However sysdevs don't have all the infrastructure needed for udev, so it couldn't really autoload drivers. This patch instead adds the CPU modaliases to the cpuid devices, which are real devices with full support for udev. This implies that the cpuid driver has to be loaded to use this. This patch just adds infrastructure, some driver conversions in followups. Thanks to Kay for helping with some sysfs magic. v2: Constifcation, some updates v4: (trenn@suse.de): - Use kzalloc instead of kmalloc to terminate modalias buffer - Use uppercase hex values to match correctly against hex values containing letters Cc: Dave Jones <davej@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jen Axboe <axboe@kernel.dk> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26debugfs: add mode, uid and gid optionsLudwig Nussel2-2/+152
Cautious admins may want to restrict access to debugfs. Currently a manual chown/chmod e.g. in an init script is needed to achieve that. Distributions that want to make the mount options configurable need to add extra config files. By allowing to set the root inode's uid, gid and mode via mount options no such hacks are needed anymore. Instead configuration becomes straight forward via fstab. Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Eliminate get_driver() and put_driver()Alan Stern2-30/+0
Now that there are no users of get_driver() or put_driver(), this patch (as1513) removes those routines completely. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Remove useless get_driver()/put_driver() callsAlan Stern4-27/+5
As part of the removal of get_driver()/put_driver(), this patch (as1512) gets rid of various useless and unnecessary calls in several drivers. In some cases it may be desirable to pin the driver by calling try_module_get(), but that can be done later. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: "David S. Miller" <davem@davemloft.net> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Michael Buesch <m@bues.ch> CC: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24cio: remove {get,put}_driverSebastian Ott2-9/+1
Remove useless {get,put}_driver - the caller of the functions has to ensure valid driver pointers. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Dynamic ID addition doesn't need get_driver()Alan Stern4-15/+3
As part of the removal of get_driver()/put_driver(), this patch (as1511) changes all the places that add dynamic IDs for drivers. Since these additions are done by writing to the drivers' sysfs attribute files, and the attributes are removed when the drivers are unregistered, there is no reason to take an extra reference to the drivers. The one exception is the pci-stub driver, which calls pci_add_dynid() as part of its registration. But again, there's no reason to take an extra reference here, because the driver can't be unloaded while it is being registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jiri Kosina <jkosina@suse.cz> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24Driver core: driver_find() drops reference before returningAlan Stern8-17/+10
As part of the removal of get_driver()/put_driver(), this patch (as1510) changes driver_find(); it now drops the reference it acquires before returning. The patch also adjusts all the callers of driver_find() to remove the now unnecessary calls to put_driver(). In addition, the patch adds a warning to driver_find(): Callers must make sure the driver they are searching for does not get unloaded while they are using it. This has always been the case; driver_find() has never prevented a driver from being unregistered or unloaded. Hence the patch will not introduce any new bugs. The existing callers all seem to be okay in this respect, however I don't understand the video drivers well enough to be certain about them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Kyungmin Park <kyungmin.park@samsung.com> CC: Andy Walls <awalls@md.metrocast.net> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24driver-core: Fix possible null reference in subsys_interface_unregisterJonghwan Choi1-2/+4
Check if the sif is not NULL before de-referencing it Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24sysfs: change permissions for /sys from 0755 to 0555Vitaly Kuznetsov1-1/+1
There is a misleading difference between /proc and /sys permissions, /proc is 0555 and /sys is 0755. But as it is impossible to create or unlink something in /sys it would be nice to have same permissions. Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24drivers: hv: Get rid of some unnecessary codeK. Y. Srinivasan1-87/+0
The current code unnecessarily limits the number of offers we handle. Get rid of this limitation. As part of this cleanup, also get rid of an unused define - MAX_MSG_TYPES. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: process multiple debug-queries on a lineJim Cromie2-30/+66
Insert ddebug_exec_queries() in place of ddebug_exec_query(). It splits the query string on [;\n], and calls ddebug_exec_query() on each. All queries are processed independent of errors, allowing a query to fail, for example when a module is not installed. Empty lines and comments are skipped. Errors are counted, and the last error seen (negative) or the number of callsites found (0 or positive) is returned. Return code checks are altered accordingly. With this, multiple queries can be given in ddebug_query, allowing more selective enabling of callsites. As a side effect, a set of commands can be batched in: cat cmd-file > $DBGMT/dynamic_debug/control We dont want a ddebug_query syntax error to kill the dynamic debug facility, so dynamic_debug_init() zeros ddebug_exec_queries()'s return code after logging the appropriate message, so that ddebug tables are preserved and $DBGMT/dynamic_debug/control file is created. This would be appropriate even without accepting multiple queries. This patch also alters ddebug_change() to return number of callsites matched (which typically is the same as number of callsites changed). ddebug_exec_query() also returns the number found, or a negative value if theres a parse error on the query. Splitting on [;\n] prevents their use in format-specs, but selecting callsites on punctuation is brittle anyway, meaningful and selective substrings are more typical. Note: splitting queries on ';' before handling trailing #comments means that a ';' also terminates a comment, and text after the ';' is treated as another query. This trailing query will almost certainly result in a parse error and thus have no effect other than the error message. The double corner case with unexpected results is: ddebug_query="func foo +p # enable foo ; +p" Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: factor vpr_info_dq out of ddebug_parse_queryJim Cromie1-8/+17
Factor pr_info(query) out of ddebug_parse_query, into vpr_info_dq(), for reuse later. Also change the printed labels: file, func to agree with the query-spec keywords accepted in the control file. Pass "" when string is null, to avoid "(null)" output from sprintf. For format print, use precision to skip last char, assuming its '\n', no great harm if not, its a debug msg. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: add trim_prefix() to provide source-root relative pathsJim Cromie2-6/+19
trim_prefix(path) skips past the absolute source path root, and returns the pointer to the relative path from there. It is used to shorten the displayed path in $DBGMT/dynamic_debug/control via ddebug_proc_show(), and in ddebug_change() to allow relative filenames to be used in applied queries. For example: ~# echo file kernel/freezer.c +p > $DBGMT/dynamic_debug/control kernel/freezer.c:128 [freezer]cancel_freezing p " clean up: %s\012" trim_prefix(path) insures common prefix before trimming it, so out-of-tree module paths are shown as full absolute paths. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: enlarge command/query write bufferJim Cromie1-4/+12
Current query write buffer is 256 bytes, on stack. In comparison, the ddebug_query boot-arg is 1024. Allocate the buffer off heap, and enlarge it to 4096 bytes, big enough for ~100 queries (at 40 bytes each), and error out if not. This makes it play nicely with large query sets (to be added later). The buffer should be enough for most uses, and others should probably be split into subsets. [jbaron@redhat.com: changed USER_BUF_PAGE from 4095 -> 4096 ] Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: chop off comments in ddebug_tokenizeJim Cromie1-0/+2
If a token begins with #, the remainder of query string is a comment, so drop it. Doing it here avoids '#' in quoted strings. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: reduce lineno field to a saner 18 bitsJim Cromie1-1/+1
lineno:24 allows files with 4 million lines, an insane file-size, even for never-to-get-in-tree machine generated code. Reduce this to 18 bits, which still allows 256k lines. This is still insanely big, but its not raving mad. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: early return if _ddebug table is emptyJim Cromie1-15/+20
If _ddebug table is empty (in a CONFIG_DYNAMIC_DEBUG build this shouldn't happen), then warn (error?) and return early. This skips empty table scan and parsing of setup-string, including the pr_info call noting the parse. By inspection, copy return-code handling from 1st ddebug_add_module() callsite to 2nd. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: tighten up error checking on debug queriesJim Cromie1-6/+33
Issue error when a match-spec is given multiple times in a rule. Previous code kept last one, but was silent about it. Docs imply only one is allowed by saying match-specs are ANDed together, given that module M cannot match both A and B. Also error when last_line < 1st_line. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: describe_flags with '=[pmflt_]*'Jim Cromie2-12/+12
Change describe_flags() to emit '=[pmflt_]+' for current callsite flags, or just '=_' when they're disabled. Having '=' in output allows a more selective grep expression; in contrast '-' may appear in filenames, line-ranges, and format-strings. '=' also has better mnemonics, saying; "the current setting is equal to <flags>". This allows grep "=_" <dbgfs>/dynamic_debug/control to see disabled callsites while avoiding the many occurrences of " = " seen in format strings. Enlarge flagsbufs to handle additional flag char, and alter ddebug_parse_flags() to allow flags=0, so that user can turn off all debug flags via: ~# echo =_ > <dbgfs>/dynamic_debug/control Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: drop explicit !=NULL checksJim Cromie1-6/+5
Convert 'if (x !=NULL)' checks into 'if (x)'. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: pr_err() call should not depend upon verbosityJim Cromie1-2/+1
Issue keyword/parsing errors even w/o verbose set; uncover otherwize mysterious non-functionality. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: replace strcpy with strlcpy, in ddebug_setup_query()Jim Cromie1-3/+5
Replace strcpy with strlcpy, and add define for the size constant. [jbaron@redhat.com: Use DDEBUG_STRING_SIZE for overflow check] Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: change verbosity at runtimeJim Cromie1-0/+1
Allow changing dynamic_debug verbosity at run-time, to ease debugging of ddebug queries as you add them, improving usability. at boot time: dynamic_debug.verbose=1 at runtime: root@voyage:~# echo 1 > /sys/module/dynamic_debug/parameters/verbose Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: make dynamic-debug supersede DEBUG ccflagJim Cromie4-12/+16
If CONFIG_DYNAMIC_DEBUG is defined, honor it over DEBUG, so that pr_debug()s are controllable, instead of always-on. When DEBUG is also defined, change _DPRINTK_FLAGS_DEFAULT to enable printing by default. Also adding _DPRINTK_FLAGS_INCL_MODNAME would be nice, but there are numerous cases of pr_debug(NAME ": ...), which would result in double printing of module-name. So defer this until things settle. Cc: David Miller <davem@davemloft.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: drop enabled field from struct _ddebug, use _DPRINTK_FLAGS_PRINTJim Cromie2-10/+4
Currently any enabled dynamic-debug flag on a pr_debug callsite will enable printing, even if _DPRINTK_FLAGS_PRINT is off. Checking print flag directly allows "-p" to disable callsites without fussing with other flags, so the following disables everything, without altering flags user may have set: echo -p > $DBGFS/dynamic_debug/control Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24dynamic_debug: fix whitespace complaints from scripts/cleanfileJim Cromie1-7/+9
Style cleanups. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24sysfs: Kill nlink counting.Eric W. Biederman3-10/+0
Tracking the number of subdirectories requires an extra field that increases the size of sysfs_dirent. nlinks are not particularly interesting for sysfs and the nlink counts are wrong when network namespaces are involved so stop counting them, and always return nlink == 1. Userspace already knows that directories with nlink == 1 have an nlink count they can't use to count subdirectories. This reduces the size of sysfs_dirent by 8 bytes on 64bit platforms. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24sysfs: Store the sysfs inode in an unsigned int.Eric W. Biederman2-3/+3
Store the sysfs inode number in an unsided int because ida inode allocator can return at most a 31 bit number, reducing the size of struct sysfs_dirent by 8 bytes on 64bit platforms. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24sysfs: Reduce s_flags to an unsinged short so it packs well with s_modeEric W. Biederman1-3/+3
On 32bit this reduces sizeof(struct sysfs_dirent) by 2 bytes. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24sysfs: Add s_hash to sysfs_dirent and order directory entries by hashEric W. Biederman2-108/+120
Compute a 31 bit hash of directory entries (that can fit in a signed 32bit off_t) and index the sysfs directory entries by that hash, replacing the per directory indexes by name and by inode. Because we now only use a single rbtree this reduces the size of sysfs_dirent by 2 pointers. Because we have fewer cases to deal with the code is now simpler. For now I use the simple hash that the dcache uses as that is easy to use and seems simple enough. In addition to makeing the code simpler using a hash for the file position in readdir brings sysfs in line with other filesystems that have non-trivial directory structures. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-19Linux 3.3-rc1v3.3-rc1Linus Torvalds1-2/+2
2012-01-19Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds9-104/+444
'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield
2012-01-19Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds4-7/+8
gpio bug fixes for v3.3 * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: Use correct offset for gpio initialization gpio/it8761e: Restrict it8761e gpio driver to x86. gpio-ml-ioh: cleanup __iomem annotation usage gpio-ml-ioh: cleanup NULL pointer checking gpio-pch: cleanup __iomem annotation usage gpio-pch: cleanup NULL pointer checking
2012-01-19Merge branch 'for-linus' of ↵Linus Torvalds3-40/+27
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... vfs: remove printk from set_nlink() wake up s_wait_unfrozen when ->freeze_fs fails
2012-01-19x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bitsH. Peter Anvin1-0/+1
In checkin 303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
2012-01-19Merge remote-tracking branch 'linus/master' into x86/urgentH. Peter Anvin9587-258975/+463528
2012-01-19Merge branch 'for-linus' of ↵Linus Torvalds4-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning MPILIB: Add a missing ENOMEM check
2012-01-19qnx4: don't leak ->BitMap on late failure exitsAl Viro1-1/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19qnx4: reduce the insane nesting in qnx4_checkroot()Al Viro1-34/+22
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19qnx4: di_fname is an array, for crying out loud...Al Viro1-14/+12
(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname is not going to be NULL, TYVM... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19KEYS: Permit key_serial() to be called with a const key pointerDavid Howells1-1/+1
Permit key_serial() to be called with a const key pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19keys: fix user_defined key sparse messagesMimi Zohar1-3/+3
Replace the rcu_assign_pointer() calls with rcu_assign_keypointer(). Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19ima: fix cred sparse warningMimi Zohar1-1/+2
Fix ima_policy.c sparse "warning: dereference of noderef expression" message, by accessing cred->uid using current_cred(). Changelog v1: - Change __cred to just cred (based on David Howell's comment) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 03:05:02 +0000