summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-09-30net: Make setsockopt() optlen be unsigned.David S. Miller67-153/+149
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28Merge branch 'master' of ↵David S. Miller19-235/+274
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-09-28sony-laptop: re-read the rfkill state when resuming from suspendAlan Jenkins1-0/+3
Without this, the hard-blocked state will be reported incorrectly if the hardware switch is changed while the laptop is suspended. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Tested-by: Norbert Preining <preining@logic.at> Acked-by: Mattia Dongili <malattia@linux.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28sony-laptop: check for rfkill hard block at load timeAlan Jenkins1-0/+6
"I recently (on a flight) I found out that when I boot with the hard-switch activated, so turning off all wireless activity on my laptop, the state is not correctly announced in /dev/rfkill (reading it with rfkill command, or my own gnome applet)... After turning off and on again the hard-switch the events were right." We can fix this by querying the firmware at load time and calling rfkill_set_hw_state(). Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Tested-by: Norbert Preining <preining@logic.at> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Mattia Dongili <malattia@linux.it> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28wext: add back wireless/ dir in sysfs for cfg80211 interfacesJohannes Berg3-8/+7
The move away from having drivers assign wireless handlers, in favour of making cfg80211 assign them, broke the sysfs registration (the wireless/ dir went missing) because the handlers are now assigned only after registration, which is too late. Fix this by special-casing cfg80211-based devices, all of which are required to have an ieee80211_ptr, in the sysfs code, and also using get_wireless_stats() to have the same values reported as in procfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Tested-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28wext: Add bound checks for copy_from_userArjan van de Ven1-3/+6
The wireless extensions have a copy_from_user to a local stack array "essid", but both me and gcc have failed to find where the bounds for this copy are located in the code. This patch adds some basic sanity checks for the copy length to make sure that we don't overflow the stack buffer. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28mac80211: improve/fix mlme messagesJohannes Berg1-9/+9
It's useful to know the MAC address when being disassociated; fix a typo (missing colon) and move some messages so we get them only when they are actually taking effect. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: always get BSSJohannes Berg1-3/+2
Multiple problems were reported due to interaction between wpa_supplicant and the wext compat code in cfg80211, which appear to be due to it not getting any bss pointer here when wpa_supplicant sets all parameters -- do that now. We should still get the bss after doing an extra scan, but that appears to increase the time we need for connecting enough to sometimes cause timeouts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Hin-Tak Leung <hintak.leung@gmail.com>, Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix 3945 ucode info retrieval after failureReinette Chatre11-204/+229
When hardware or uCode problem occurs driver captures significant information from device to enable debugging. The format of this information is different between 3945 and 4965 and later devices, yet currently the 3945 uses the 4965 and later format. Fix this by adding a new library call that is initialized to the correct formatting routine based on device. This moves the iwlagn event and error log handling back to iwl-agn.c to make it part of iwlagn module. Also remove the 3945 sysfs file that triggers dump of event log - there is already a debugfs file that can do it for all drivers. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix memory leak in command queue handlingReinette Chatre1-0/+6
Also free the array of command pointers and meta data of each command buffer when command queue is freed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28iwlwifi: fix debugfs buffer handlingReinette Chatre1-3/+3
We keep track of where to write into a buffer by keeping a count of how much has been written so far. When writing to the buffer we thus take the buffer pointer and adding the count of what has been written so far. Keeping track of what has been written so far is done by incrementing this number every time something is written to the buffer with how much has been written at that time. Currently this number is incremented incorrectly when using the "hex_dump_to_buffer" call to add data to the buffer. Fix this by only adding what has been added to the buffer in that call instead of what has been added since beginning of buffer. Issue was discovered and discussed during testing of https://bugzilla.redhat.com/show_bug.cgi?id=464598 . When a user views any of these files they will see something like: [ 179.355202] ------------[ cut here ]------------ [ 179.355209] WARNING: at ../lib/vsprintf.c:989 vsnprintf+0x5ec/0x5f0() [ 179.355212] Hardware name: VGN-Z540N [ 179.355213] Modules linked in: i915 drm i2c_algo_bit i2c_core ipv6 acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_conservative cpufreq_stats freq_table container sbs sbshc arc4 ecb iwlagn iwlcore joydev led_class mac80211 af_packet pcmcia psmouse sony_laptop cfg80211 iTCO_wdt iTCO_vendor_support pcspkr serio_raw rfkill intel_agp video output tpm_infineon tpm tpm_bios button battery yenta_socket rsrc_nonstatic pcmcia_core processor ac evdev ext3 jbd mbcache sr_mod sg cdrom sd_mod ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal fan thermal_sys [ 179.355262] Pid: 5449, comm: cat Not tainted 2.6.31-wl-54419-ge881071 #62 [ 179.355264] Call Trace: [ 179.355267] [<ffffffff811ad14c>] ? vsnprintf+0x5ec/0x5f0 [ 179.355271] [<ffffffff81041348>] warn_slowpath_common+0x78/0xd0 [ 179.355275] [<ffffffff810413af>] warn_slowpath_null+0xf/0x20 [ 179.355277] [<ffffffff811ad14c>] vsnprintf+0x5ec/0x5f0 [ 179.355280] [<ffffffff811ad23d>] ? scnprintf+0x5d/0x80 [ 179.355283] [<ffffffff811ad23d>] scnprintf+0x5d/0x80 [ 179.355286] [<ffffffff811aed29>] ? hex_dump_to_buffer+0x189/0x340 [ 179.355290] [<ffffffff810e91d7>] ? __kmalloc+0x207/0x260 [ 179.355303] [<ffffffffa02a02f8>] iwl_dbgfs_nvm_read+0xe8/0x220 [iwlcore] [ 179.355306] [<ffffffff811a9b62>] ? __up_read+0x92/0xb0 [ 179.355310] [<ffffffff810f0988>] vfs_read+0xc8/0x1a0 [ 179.355313] [<ffffffff810f0b50>] sys_read+0x50/0x90 [ 179.355316] [<ffffffff8100bd6b>] system_call_fastpath+0x16/0x1b [ 179.355319] ---[ end trace 2383d0d5e0752ca0 ]--- Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: don't set privacy w/o keyJohannes Berg1-1/+2
When wpa_supplicant is used to connect to open networks, it causes the wdev->wext.keys to point to key memory, but that key memory is all empty. Only use privacy when there is a default key to be used. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Luis R. Rodriguez <lrodriguez@atheros.com> Tested-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28cfg80211: wext: don't display BSSID unless associatedJohannes Berg1-4/+1
Currently, cfg80211's SIOCGIWAP implementation returns the BSSID that the user set, even if the connection has since been dropped due to other changes. It only should return the current BSSID when actually connected. Also do a small code cleanup. Reported-by: Thomas H. Guenther <thomas.h.guenther@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Thomas H. Guenther <thomas.h.guenther@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-28net: Add explicit bound checks in net/socket.cArjan van de Ven1-1/+6
The sys_socketcall() function has a very clever system for the copy size of its arguments. Unfortunately, gcc cannot deal with this in terms of proving that the copy_from_user() is then always in bounds. This is the last (well 9th of this series, but last in the kernel) such case around. With this patch, we can turn on code to make having the boundary provably right for the whole kernel, and detect introduction of new security accidents of this type early on. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28bridge: Fix double-free in br_add_if.Jeff Hansen1-0/+1
There is a potential double-kfree in net/bridge/br_if.c. If br_fdb_insert fails, then the kobject is put back (which calls kfree due to the kobject release), and then kfree is called again on the net_bridge_port. This patch fixes the crash. Thanks to Stephen Hemminger for the one-line fix. Signed-off-by: Jeff Hansen <x@jeffhansen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28isdn: fix netjet/isdnhdlc build errorsRandy Dunlap2-2/+2
Commit cb3824bade2549d7ad059d5802da43312540fdee didn't fix this problem. Fix build errors in netjet, using isdnhdlc module: drivers/built-in.o: In function `mode_tiger': netjet.c:(.text+0x1ca0c7): undefined reference to `isdnhdlc_rcv_init' netjet.c:(.text+0x1ca0d4): undefined reference to `isdnhdlc_out_init' drivers/built-in.o: In function `fill_dma': netjet.c:(.text+0x1ca2bd): undefined reference to `isdnhdlc_encode' drivers/built-in.o: In function `read_dma': netjet.c:(.text+0x1ca614): undefined reference to `isdnhdlc_decode' drivers/built-in.o: In function `nj_irq': netjet.c:(.text+0x1cb07a): undefined reference to `isdnhdlc_encode' drivers/built-in.o: In function `isdnhdlc_decode': (.text+0x1c2088): undefined reference to `crc_ccitt_table' drivers/built-in.o: In function `isdnhdlc_encode': (.text+0x1c2339): undefined reference to `crc_ccitt_table' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28atm: dereference of he_dev->rbps_virt in he_init_group()Juha Leppanen1-7/+7
The prefix decrement causes a very long loop if pci_pool_alloc() failed in the first iteration. Also I swapped rbps and rbpl arguments. Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-28ax25: Add missing dev_put in ax25_setsockoptRalf Baechle1-9/+10
ax25_setsockopt SO_BINDTODEVICE is missing a dev_put call in case of success. Re-order code to fix this bug. While at it also reformat two lines of code to comply with the Linux coding style. Initial patch by Jarek Poplawski <jarkao2@gmail.com>. Reported-by: Bernard Pidoux F6BVP <f6bvp@free.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26Revert "sit: stateless autoconf for isatap"Sascha Hlusiak4-67/+1
This reverts commit 645069299a1c7358cf7330afe293f07552f11a5d. While the code does not actually break anything, it does not completely follow RFC5214 yet. After talking back with Fred L. Templin, I agree that completing the ISATAP specific RS/RA code, would pollute the kernel a lot with code that is better implemented in userspace. The kernel should not send RS packages for ISATAP at all. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Acked-by: Fred L. Templin <Fred.L.Templin@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26net: fix double skb free in dcbnlJohn Fastabend1-8/+7
netlink_unicast() calls kfree_skb even in the error case. dcbnl calls netlink_unicast() which when it fails free's the skb and returns an error value. dcbnl is free'ing the skb again when this error occurs. This patch removes the double free. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26net: fix nlmsg len size for skb when error bit is set.John Fastabend1-1/+1
Currently, the nlmsg->len field is not set correctly in netlink_ack() for ack messages that include the nlmsg of the error frame. This corrects the length field passed to __nlmsg_put to use the correct payload size. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26net: fix vlan_get_size to include vlan_flags sizeJohn Fastabend1-0/+1
Fix vlan_get_size to include vlan->flags. Currently, the size of the vlan flags is not included in the nlmsg size. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: cleanup unused prototypeDon Skidmore1-1/+0
The function e1000_enable_tx_pkt_filtering() was removed in a previous cleanup patch. this removes the no longer used prototype. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: fix namespacecheck warningsJesse Brandeburg2-15/+1
a couple of functions needed to be removed/declared static Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop unused functionality for eeprom write/readJesse Brandeburg2-120/+3
eerd and eewr don't exist on pre PCIe devices Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: updated whitespace and commentsJesse Brandeburg3-6229/+6337
A large whitespace change to e1000_hw.[ch] in order to update it to kernel coding style (by running lindent). Updated function header comments into kdoc style. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop redunant line of code, cleanupJesse Brandeburg1-8/+4
adapter was being assigned twice, also clarified variable name and unwrapped line. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: remove races when changing mtuJesse Brandeburg1-2/+14
this patch fixes a bug that occurs when routing packets and simultaneously changing the mtu. the rx_buffer_len variable is used during the rx cleanup and if that changes on the fly without stopping traffic bad things happen Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: two workarounds were incomplete, fix themJesse Brandeburg1-7/+10
1) 82544 does not need last_tx_tso workaround, it interferes with the 82544 workaround too 2) 82544 hang workaround was using the address of the page struct instead of the physical address as its "workaround decider" not sure how that ever worked Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: fix tx waking queue after queue stopped during shutdownJesse Brandeburg1-6/+9
This fix closes a race where the adapter can be shutting down while hard_start_xmit is being called and interrupts are being handled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: test link state conclusivelyJesse Brandeburg4-77/+157
e1000 was using one particular way to detect link, but with the advent of some of the newer hardware designs using SERDES connections, tests for link must completely cover all cases. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: stop timers at appropriate timesJesse Brandeburg1-7/+19
there were some hotplug cases that made timers still run after the driver had been removed, make sure to stop all the timers and not allow racy reschedules. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: use netif_tx_disableJesse Brandeburg1-2/+1
we can use netif_tx_disable now because LLTX has been removed. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: remove unused functionsJesse Brandeburg2-174/+2
after removal of pcie, need to remove some unnecessary functions Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-26e1000: drop dead pcie code from e1000Jesse Brandeburg6-4335/+193
this patch is the first in a series of clean up patches for e1000 to drop unused code, and update the driver to kernel spec, and then, to update the driver to have all available bug fixes. Call it the e1000 weight loss plan. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25at91_can: Forgotten git 'add' of at91_can.cDavid S. Miller1-0/+1186
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25TI Davinci EMAC: Fix in vector definition for EMAC_VERSION_2Sriram1-1/+8
In the emac_poll function when looking for interrupt status masks correct definition must be chosen based on EMAC_VERSION(the bit mask has changed from version 1 to version 2). Signed-off-by: Sriram <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25ax25: Fix ax25_cb refcounting in ax25_ctl_ioctlJarek Poplawski1-10/+17
Use ax25_cb_put after ax25_find_cb in ax25_ctl_ioctl. Reported-by: Bernard Pidoux F6BVP <f6bvp@free.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Reviewed-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25Merge branch 'master' of ↵David S. Miller1-141/+88
ssh://master.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-davem
2009-09-24genetlink: fix netns vs. netlink table locking (2)Johannes Berg3-9/+15
Similar to commit d136f1bd366fdb7e747ca7e0218171e7a00a98a5, there's a bug when unregistering a generic netlink family, which is caught by the might_sleep() added in that commit: BUG: sleeping function called from invalid context at net/netlink/af_netlink.c:183 in_atomic(): 1, irqs_disabled(): 0, pid: 1510, name: rmmod 2 locks held by rmmod/1510: #0: (genl_mutex){+.+.+.}, at: [<ffffffff8138283b>] genl_unregister_family+0x2b/0x130 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff8138270c>] __genl_unregister_mc_group+0x1c/0x120 Pid: 1510, comm: rmmod Not tainted 2.6.31-wl #444 Call Trace: [<ffffffff81044ff9>] __might_sleep+0x119/0x150 [<ffffffff81380501>] netlink_table_grab+0x21/0x100 [<ffffffff813813a3>] netlink_clear_multicast_users+0x23/0x60 [<ffffffff81382761>] __genl_unregister_mc_group+0x71/0x120 [<ffffffff81382866>] genl_unregister_family+0x56/0x130 [<ffffffffa0007d85>] nl80211_exit+0x15/0x20 [cfg80211] [<ffffffffa000005a>] cfg80211_exit+0x1a/0x40 [cfg80211] Fix in the same way by grabbing the netlink table lock before doing rcu_read_lock(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-243c59x: Get rid of "Trying to free already-free IRQ"Anton Vorontsov1-9/+3
Following trace pops up if we try to suspend with 3c59x ethernet NIC brought down: root@b1:~# ifconfig eth16 down root@b1:~# echo mem > /sys/power/state ... 3c59x 0000:00:10.0: suspend 3c59x 0000:00:10.0: PME# disabled Trying to free already-free IRQ 48 ------------[ cut here ]------------ Badness at c00554e4 [verbose debug info unavailable] NIP: c00554e4 LR: c00554e4 CTR: c019a098 REGS: c7975c60 TRAP: 0700 Not tainted (2.6.31-rc4) MSR: 00021032 <ME,CE,IR,DR> CR: 28242422 XER: 20000000 TASK = c79cb0c0[1746] 'bash' THREAD: c7974000 ... NIP [c00554e4] __free_irq+0x108/0x1b0 LR [c00554e4] __free_irq+0x108/0x1b0 Call Trace: [c7975d10] [c00554e4] __free_irq+0x108/0x1b0 (unreliable) [c7975d30] [c005559c] free_irq+0x10/0x24 [c7975d40] [c01e21ec] vortex_suspend+0x70/0xc4 [c7975d60] [c017e584] pci_legacy_suspend+0x58/0x100 This is because the driver manages interrupts without checking for netif_running(). Though, there are few other issues with suspend/resume in this driver. The intention of calling free_irq() in suspend() was to avoid any possible spurious interrupts (see commit 5b039e681b8c5f30aac9cc04385 "3c59x PM fixes"). But, - On resume, the driver was requesting IRQ just after pci_set_master(), but before vortex_up() (which actually resets 3c59x chips). - Issuing free_irq() on a shared IRQ doesn't guarantee that a buggy HW won't trigger spurious interrupts in another driver that requested the same interrupt. So, if we want to protect from unexpected interrupts, then on suspend we should issue disable_irq(), not free_irq(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24tunnel: eliminate recursion fieldEric Dumazet5-36/+1
It seems recursion field from "struct ip_tunnel" is not anymore needed. recursion prevention is done at the upper level (in dev_queue_xmit()), since we use HARD_TX_LOCK protection for tunnels. This avoids a cache line ping pong on "struct ip_tunnel" : This structure should be now mostly read on xmit and receive paths. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2Sebastian Haas1-7/+9
The driver mapped only 128 bytes of the CAN controller address space when a CPC-PCI v2 was detected (incl. CPC-104P). This patch will fix it by always mapping the whole address space (4096 bytes on all boards) of the corresponding PCI BAR. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24net: fix htmldocs sunrpc, clnt.cJaswinder Singh Rajput1-2/+3
DOCPROC Documentation/DocBook/networking.xml Warning(net/sunrpc/clnt.c:647): No description found for parameter 'req' Warning(net/sunrpc/clnt.c:647): No description found for parameter 'tk_ops' Warning(net/sunrpc/clnt.c:647): Excess function parameter 'ops' description in 'rpc_run_bc_task' Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Cc: Benny Halevy <bhalevy@panasas.com> Cc: Andy Adamson <andros@netapp.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24Phonet: error on broadcast sending (unimplemented)Rémi Denis-Courmont2-0/+7
If we ever implement this, then we can stop returning an error. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24Phonet: fix race for port number in concurrent bind()Rémi Denis-Courmont1-8/+8
Allocating a port number to a socket and hashing that socket shall be an atomic operation with regards to other port allocation. Otherwise, we could allocate a port that is already being allocated to another socket. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24pktgen: better scheduler friendlinessStephen Hemminger1-79/+72
Previous update did not resched in inner loop causing watchdogs. Rewrite inner loop to: * account for delays better with less clock calls * more accurate timing of delay: - only delay if packet was successfully sent - if delay is 100ns and it takes 10ns to build packet then account for that * use wait_event_interruptible_timeout rather than open coding it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24pktgen: T_TERMINATE flag is unusedStephen Hemminger1-5/+4
Get rid of unused flag bit. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24ipv4: check optlen for IP_MULTICAST_IF optionShan Wei1-0/+3
Due to man page of setsockopt, if optlen is not valid, kernel should return -EINVAL. But a simple testcase as following, errno is 0, which means setsockopt is successful. addr.s_addr = inet_addr("192.1.2.3"); setsockopt(s, IPPROTO_IP, IP_MULTICAST_IF, &addr, 1); printf("errno is %d\n", errno); Xiaotian Feng(dfeng@redhat.com) caught the bug. We fix it firstly checking the availability of optlen and then dealing with the logic like other options. Reported-by: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller6498-342228/+724722
Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 11:10:53 +0000