summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-09-21Merge branch 'drm-intel-fixes' of ↵Linus Torvalds8-26/+73
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: Hold a reference to the object whilst unbinding the eviction list drm/i915,agp/intel: Add second set of PCI-IDs for B43 drm/i915: Fix Sandybridge fence registers drm/i915/crt: Downgrade warnings for hotplug failures drm/i915: Ensure that the crtcinfo is populated during mode_fixup()
2010-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2-6/+13
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY. virtio: console: Prevent userspace from submitting NULL buffers virtio: console: Fix poll blocking even though there is data to read
2010-09-21Merge remote branch 'linus' into drm-intel-fixesChris Wilson214-1525/+1994
2010-09-21lguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY.Rusty Russell1-5/+8
We used to have a hypercall which reloaded the entire GDT, then we switched to one which loaded a single entry (to match the IDT code). Some comments were not updated, so fix them. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reported by: Eviatar Khen <eviatarkhen@gmail.com>
2010-09-21virtio: console: Prevent userspace from submitting NULL buffersAmit Shah1-0/+4
A userspace could submit a buffer with 0 length to be written to the host. Prevent such a situation. This was not needed previously, but recent changes in the way write() works exposed this condition to trigger a virtqueue event to the host, causing a NULL buffer to be sent across. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: stable@kernel.org
2010-09-21virtio: console: Fix poll blocking even though there is data to readHans de Goede1-1/+1
I found this while working on a Linux agent for spice, the symptom I was seeing was select blocking on the spice vdagent virtio serial port even though there were messages queued up there. virtio_console's port_fops_poll checks port->inbuf != NULL to determine if read won't block. However if an application reads enough bytes from inbuf through port_fops_read, to empty the current port->inbuf, port->inbuf will be NULL even though there may be buffers left in the virtqueue. This causes poll() to block even though there is data to be read, this patch fixes this by using will_read_block(port) instead of the port->inbuf != NULL check. Signed-off-By: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2010-09-20Linux 2.6.36-rc5v2.6.36-rc5Linus Torvalds1-1/+1
2010-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds3-22/+10
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: vt6655: fix buffer overflow Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"
2010-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds6-32/+66
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: musb: MAINTAINERS: Fix my mail address USB: serial/mos*: prevent reading uninitialized stack memory USB: otg: twl4030: fix phy initialization(v1) USB: EHCI: Disable langwell/penwell LPM capability usb: musb_debugfs: don't use the struct file private_data field with seq_files
2010-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds2-15/+11
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: mfd: fix bug in serial_hsu_remove() serial: amba-pl010: fix set_ldisc
2010-09-20Staging: vt6655: fix buffer overflowDan Carpenter1-3/+8
"param->u.wpa_associate.wpa_ie_len" comes from the user. We should check it so that the copy_from_user() doesn't overflow the buffer. Also further down in the function, we assume that if "param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is initialized. To make that work, I changed the test here to say that if "wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return -EINVAL. Oddly, we only use the first element of the abyWPAIE[] array. So I suspect there may be some other issues in this function. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"Sven Eckelmann2-19/+2
This reverts commit 96d592ed599434d2d5f339a1d282871bc6377d2c. The netfilter hook seems to be misused and may leak skbs in situations when NF_HOOK returns NF_STOLEN. It may not filter everything as expected. Also the ethernet bridge tables are not yet capable to understand batman-adv packet correctly. It was only added for testing purposes and can be removed again. Reported-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20serial: mfd: fix bug in serial_hsu_remove()Feng Tang1-8/+9
Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller), so in pci remove func, we need handle them differently Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20serial: amba-pl010: fix set_ldiscMika Westerberg1-7/+2
Commit d87d9b7d1 ("tty: serial - fix tty referencing in set_ldisc") changed set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver according the new prototype. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Cc: Alan Cox <alan@linux.intel.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: musb: MAINTAINERS: Fix my mail addressFelipe Balbi1-2/+2
If we don't, contributors to musb and any USB OMAP code will be sending mails to an unexistent inbox. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: serial/mos*: prevent reading uninitialized stack memoryDan Rosenberg2-0/+6
The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows unprivileged users to read uninitialized stack memory, because the "reserved" member of the serial_icounter_struct struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: otg: twl4030: fix phy initialization(v1)Ming Lei1-27/+51
Commit 461c317705eca5cac09a360f488715927fd0a927(into 2.6.36-v3) is put forward to power down phy if no usb cable is connected, but does introduce the two issues below: 1), phy is not into work state if usb cable is connected with PC during poweron, so musb device mode is not usable in such case, follows the reasons: -twl4030_phy_resume is not called, so regulators are not enabled i2c access are not enabled usb mode not configurated 2), The kernel warings[1] of regulators 'unbalanced disables' is caused if poweron without usb cable connected with PC or b-device. This patch fixes the two issues above: -power down phy only if no usb cable is connected with PC and b-device -do phy initialization(via __twl4030_phy_resume) if usb cable is connected with PC(vbus event) or another b-device(ID event) in twl4030_usb_probe. This patch also doesn't put VUSB3V1 LDO into active mode in twl4030_usb_ldo_init until VBUS/ID change detected, so we can save more power consumption than before. This patch is verified OK on Beagle board either connected with usb cable or not when poweron. [1]. warnings of 'unbalanced disables' of regulators. [root@OMAP3EVM /]# dmesg ------------[ cut here ]------------ WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128() unbalanced disables for VUSB1V8 Modules linked in: Backtrace: [<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c) r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d [<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c) [<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40) r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb r4:c78e6c00 [<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128) r3:c0410e53 r2:c0410ad5 [<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38) r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00 [<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c) r5:c78595c0 r4:00000000 [<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c) r6:00000000 r5:c78595c0 r4:c78595c0 [<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c) r5:c78595c0 r4:00000040 [<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c) r6:00000000 r5:00000000 r4:c78595c0 [<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24) r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c [<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190) [<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48) r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c [<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94) r6:c78e663c r5:c78e6608 r4:c78e6608 [<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48) r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600 [<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4) [<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c) [<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118) r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000 [<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c) [<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4) [<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190) r5:c7856e20 r4:c047c860 [<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48) r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860 [<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90) r5:c0214390 r4:00000000 [<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94) r6:c7856e54 r5:c7856e20 r4:c7856e20 [<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48) r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20 [<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4) [<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20) [<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150) r5:c7856e00 r4:c7856e20 [<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4) r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0 [<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4) r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000 [<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8) r5:00000000 r4:c78fd000 [<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24) [<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190) [<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c) r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0 [<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84) r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000 [<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28) r6:c047e214 r5:c047e214 r4:c00270d0 [<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228) [<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c) [<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60) r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc r4:c00270d0 [<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c) [<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4) [<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154) [<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688) r5:c00083dc r4:00000000 ---[ end trace 1b75b31a2719ed1d ]--- Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: EHCI: Disable langwell/penwell LPM capabilityAlek Du1-0/+5
We have to do so due to HW limitation. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20usb: musb_debugfs: don't use the struct file private_data field with seq_filesMathias Nyman1-3/+2
seq_files use the private_data field of a file struct for storing a seq_file structure, data should be stored in seq_file's own private field (e.g. file->private_data->private) Otherwise seq_release() will free the private data when the file is closed. Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20drm/i915: Hold a reference to the object whilst unbinding the eviction listChris Wilson1-2/+7
During heavy aperture thrashing we may be forced to wait upon several active objects during eviction. The active list may be the last reference to these objects and so the action of waiting upon one of them may cause another to be freed (and itself unbound). To prevent the object disappearing underneath us, we need to acquire and hold a reference whilst unbinding. This should fix the reported page refcount OOPS: kernel BUG at drivers/gpu/drm/i915/i915_gem.c:1444! ... RIP: 0010:[<ffffffffa0093026>] [<ffffffffa0093026>] i915_gem_object_put_pages+0x25/0xf5 [i915] Call Trace: [<ffffffffa009481d>] i915_gem_object_unbind+0xc5/0x1a7 [i915] [<ffffffffa0098ab2>] i915_gem_evict_something+0x3bd/0x409 [i915] [<ffffffffa0027923>] ? drm_gem_object_lookup+0x27/0x57 [drm] [<ffffffffa0093bc3>] i915_gem_object_bind_to_gtt+0x1d3/0x279 [i915] [<ffffffffa0095b30>] i915_gem_object_pin+0xa3/0x146 [i915] [<ffffffffa0027948>] ? drm_gem_object_lookup+0x4c/0x57 [drm] [<ffffffffa00961bc>] i915_gem_do_execbuffer+0x50d/0xe32 [i915] Reported-by: Shawn Starr <shawn.starr@rogers.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18902 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-20frv: double syscall restarts, syscall restart in sigreturn()Al Viro1-1/+3
We need to make sure that only the first do_signal() to be handled on the way out syscall will bother with syscall restarts; additionally, the check on the "signal has user handler" path had been wrong - compare with restart prevention in sigreturn()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20frv: handling of restart into restart_syscall is fsckedAl Viro1-1/+1
do_signal() should place the syscall number in gr7, not gr8 when handling ERESTART_WOULDBLOCK. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20frv: avoid infinite loop of SIGSEGV deliveryAl Viro1-2/+2
Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former resets the SEGV handler pointer which will kill the process, rather than leaving it open to an infinite loop if the SEGV handler itself caused a SEGV signal. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20frv: fix address verification holes in setup_frame/setup_rt_frameAl Viro1-16/+22
a) sa_handler might be maliciously set to point to kernel memory; blindly dereferencing it in FDPIC case is a Bad Idea(tm). b) I'm not sure you need that set_fs(USER_DS) there at all, but if you do, you'd better do it *before* checking the frame you've decided to use with access_ok(), lest sigaltstack() becomes a convenient roothole. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20frv: restart_block.fn needs to be reset on sigreturnAl Viro1-0/+3
Reset restart_block.fn on executing a sigreturn such that any currently pending system call restarts will be forced to return -EINTR. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-20mm: further fix swapin race conditionHugh Dickins1-3/+5
Commit 4969c1192d15 ("mm: fix swapin race condition") is now agreed to be incomplete. There's a race, not very much less likely than the original race envisaged, in which it is further necessary to check that the swapcache page's swap has not changed. Here's the reasoning: cast in terms of reuse_swap_page(), but probably could be reformulated to rely on try_to_free_swap() instead, or on swapoff+swapon. A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and comes through the lock_page(page1). B, a racing thread of the same process, faults on the same address: does page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but for whatever reason is unlucky not to get the lock any time soon. A carries on through do_swap_page(), a write fault, but cannot reuse the swap page1 (another reference to swap1). Unlocks the page1 (but B doesn't get it yet), does COW in do_wp_page(), page2 now in that pte. C, perhaps the parent of A+B, comes in and write faults the same swap page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed. kswapd comes in after some time (B still unlucky) and swaps out some pages from A+B and C: it allocates the original swap1 to page2 in A+B, and some other swap2 to the original page1 now in C. But does not immediately free page1 (actually it couldn't: B holds a reference), leaving it in swap cache for now. B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes. Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been given the swap1 which page1 used to have. So B proceeds to insert page1 into A+B's page_table, though its content now belongs to C, quite different from what A wrote there. B ought to have checked that page1's swap was still swap1. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-19Merge branch 'for-linus' of ↵Linus Torvalds13-131/+88
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: deal with multiple simultaneously pending signals alpha: fix a 14 years old bug in sigreturn tracing alpha: unb0rk sigsuspend() and rt_sigsuspend() alpha: belated ERESTART_RESTARTBLOCK race fix alpha: Shift perf event pending work earlier in timer interrupt alpha: wire up fanotify and prlimit64 syscalls alpha: kill big kernel lock alpha: fix build breakage in asm/cacheflush.h alpha: remove unnecessary cast from void* in assignment. alpha: Use static const char * const where possible
2010-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds1-9/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix ordering of procfs registry.
2010-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds22-35/+136
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) dca: disable dca on IOAT ver.3.0 multiple-IOH platforms netpoll: Disable IRQ around RCU dereference in netpoll_rx sctp: Do not reset the packet during sctp_packet_config(). net/llc: storing negative error codes in unsigned short MAINTAINERS: move atlx discussions to netdev drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory drivers/net/eql.c: prevent reading uninitialized stack memory drivers/net/usb/hso.c: prevent reading uninitialized memory xfrm: dont assume rcu_read_lock in xfrm_output_one() r8169: Handle rxfifo errors on 8168 chips 3c59x: Remove atomic context inside vortex_{set|get}_wol tcp: Prevent overzealous packetization by SWS logic. net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS phylib: fix PAL state machine restart on resume net: use rcu_barrier() in rollback_registered_many bonding: correctly process non-linear skbs ipv4: enable getsockopt() for IP_NODEFRAG ipv4: force_igmp_version ignored when a IGMPv3 query received ppp: potential NULL dereference in ppp_mp_explode() net/llc: make opt unsigned in llc_ui_setsockopt() ...
2010-09-19Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds9-66/+107
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410 ARM: S3C64XX: Fix coding style errors on mach-real6410 ARM: S3C64XX: Prototype SPI devices ARM: S3C64XX: Fix dev-spi build ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr ARM: SAMSUNG: Fix on drive strength value ARM: S5PV210: Add FIMC clocks ARM: S5PV210: Reduce the iodesc length of systimer ARM: S5PV210: Update I2C-1 Clock Register Property. ARM: S5P: Decrease IO Registers memory region size on FIMC ARM: S5P: Fix DMA coherent mask for FIMC
2010-09-19Coda: mount hangs because of missed REQ_WRITE renameJan Harkes1-2/+2
Coda's REQ_* defines were renamed to avoid clashes with the block layer (commit 4aeefdc69f7b: "coda: fixup clash with block layer REQ_* defines"). However one was missed and response messages are no longer matched with requests and waiting threads are no longer woken up. This patch fixes this. Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> [ Also fixed up whitespace while at it -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-18alpha: deal with multiple simultaneously pending signalsAl Viro1-5/+11
Unlike the other targets, alpha sets _one_ sigframe and buggers off until the next syscall/interrupt, even if more signals are pending. It leads to quite a few unpleasant inconsistencies, starting with SIGSEGV potentially arriving not where it should and including e.g. mess with sigsuspend(); consider two pending signals blocked until sigsuspend() unblocks them. We pick the first one; then, if we are hit by interrupt while in the handler, we process the second one as well. If we are not, and if no syscalls had been made, we get out of the first handler and leave the second signal pending; normally sigreturn() would've picked it anyway, but here it starts with restoring the original mask and voila - the second signal is blocked again. On everything else we get both delivered consistently. It's actually easy to fix; the only thing to watch out for is prevention of double syscall restart. Fortunately, the idea I've nicked from arm fix by rmk works just fine... Testcase demonstrating the behaviour in question; on alpha we get one or both flags set (usually one), on everything else both are always set. #include <signal.h> #include <stdio.h> int had1, had2; void f1(int sig) { had1 = 1; } void f2(int sig) { had2 = 1; } main() { sigset_t set1, set2; sigemptyset(&set1); sigemptyset(&set2); sigaddset(&set2, 1); sigaddset(&set2, 2); signal(1, f1); signal(2, f2); sigprocmask(SIG_SETMASK, &set2, NULL); raise(1); raise(2); sigsuspend(&set1); printf("had1:%d had2:%d\n", had1, had2); } Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: fix a 14 years old bug in sigreturn tracingAl Viro1-2/+11
The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL, all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support. What happens is direct return to ret_from_syscall, in order to bypass mangling of a3 (error indicator) and prevent other mutilations of registers (e.g. by syscall restart). That's fine, but... the entire TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall stopping/notifying the tracer is after the syscall. And the normal path we are forcibly switching to doesn't have it. So we end up with *one* stop in traced sigreturn() vs. two in other syscalls. And yes, strace is visibly broken by that; try to strace the following #include <signal.h> #include <stdio.h> void f(int sig) {} main() { signal(SIGHUP, f); raise(SIGHUP); write(1, "eeeek\n", 6); } and watch the show. The close(1) = 405 in the end of strace output is coming from return value of write() (6 == __NR_close on alpha) and syscall number of exit_group() (__NR_exit_group == 405 there). The fix is fairly simple - the only thing we end up missing is the call of syscall_trace() and we can tell whether we'd been called from the SYSCALL_TRACE path by checking ra value. Since we are setting the switch_stack up (that's what sys_sigreturn() does), we have the right environment for calling syscall_trace() - just before we call undo_switch_stack() and return. Since undo_switch_stack() will overwrite s0 anyway, we can use it to store the result of "has it been called from SYSCALL_TRACE path?" check. The same thing applies in rt_sigreturn(). Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: unb0rk sigsuspend() and rt_sigsuspend()Al Viro3-69/+2
Old code used to set regs->r0 and regs->r19 to force the right return value. Leaving that after switch to ERESTARTNOHAND was a Bad Idea(tm), since now that screws the restart - if we hit the case when get_signal_to_deliver() returns 0, we will step back to syscall insn, with v0 set to EINTR and a3 to 1. The latter won't matter, since EINTR is 4, aka __NR_write. Testcase: #include <signal.h> #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> main() { sigset_t mask; sigemptyset(&mask); sigaddset(&mask, SIGCONT); sigprocmask(SIG_SETMASK, &mask, NULL); kill(0, SIGCONT); syscall(__NR_sigsuspend, 1, "b0rken\n", 7); } results on alpha in immediate message to stdout... Fix is obvious; moreover, since we don't need regs anymore, we can switch to normal prototypes for these guys and lose the wrappers. Even better, rt_sigsuspend() is identical to generic version in kernel/signal.c now. Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: belated ERESTART_RESTARTBLOCK race fixAl Viro1-1/+2
same thing as had been done on other targets back in 2003 - move setting ->restart_block.fn into {rt_,}sigreturn(). Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: Shift perf event pending work earlier in timer interruptMichael Cree1-5/+5
Pending work from the performance event subsystem is executed in the timer interrupt. This patch shifts the call to perf_event_do_pending() before the call to update_process_times() as the latter may call back into the perf event subsystem and it is prudent to have the pending work executed first. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: wire up fanotify and prlimit64 syscallsMikael Pettersson2-1/+7
The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on Alpha. Built and booted on an XP900. Untested beyond that. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: kill big kernel lockArnd Bergmann2-8/+0
All uses of the BKL on alpha are totally bogus, nothing is really protected by this. Remove the remaining users so we don't have to mark alpha as 'depends on BKL'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: fix build breakage in asm/cacheflush.hTejun Heo1-0/+2
Alpha SMP flush_icache_user_range() is implemented as an inline function inside include/asm/cacheflush.h. It dereferences @current but doesn't include linux/sched.h and thus causes build failure if linux/sched.h wasn't included previously. Fix it by including the needed header file explicitly. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: remove unnecessary cast from void* in assignment.matt mooney2-2/+2
Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-18alpha: Use static const char * const where possibleJoe Perches4-38/+46
Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-09-17dca: disable dca on IOAT ver.3.0 multiple-IOH platformsSosnowski, Maciej1-6/+79
Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms. This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-18ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410Darius Augulis1-1/+1
Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver platform data in board mach-real6410. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18ARM: S3C64XX: Fix coding style errors on mach-real6410Darius Augulis1-52/+52
Fix errors reported by checkpatch.pl script Signed-off-by: Darius Augulis <augulis.darius@gmail.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-18ARM: S3C64XX: Prototype SPI devicesMark Brown1-0/+1
Avoids build warnings due to the undeclared non-statics. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-17netpoll: Disable IRQ around RCU dereference in netpoll_rxHerbert Xu1-4/+4
We cannot use rcu_dereference_bh safely in netpoll_rx as we may be called with IRQs disabled. We could however simply disable IRQs as that too causes BH to be disabled and is safe in either case. Thanks to John Linville for discovering this bug and providing a patch. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17sctp: Do not reset the packet during sctp_packet_config().Vlad Yasevich1-1/+0
sctp_packet_config() is called when getting the packet ready for appending of chunks. The function should not touch the current state, since it's possible to ping-pong between two transports when sending, and that can result packet corruption followed by skb overlfow crash. Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17Merge branch 'for-linus' of ↵Linus Torvalds8-13/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: pcm - Fix race with proc files ALSA: pcm - Fix unbalanced pm_qos_request ALSA: HDA: Enable internal speaker on Dell M101z ALSA: patch_nvhdmi.c: Fix supported sample rate list. sound: Remove pr_<level> uses of KERN_<level> ALSA: hda - Add quirk for Toshiba C650D using a Conexant CX20585 ALSA: hda_intel: ALSA HD Audio patch for Intel Patsburg DeviceIDs
2010-09-17Merge branch 'hwmon-for-linus' of ↵Linus Torvalds9-42/+50
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm95241) Replace rate sysfs attribute with update_interval hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval hwmon: (w83627ehf) Use proper exit sequence hwmon: (emc1403) Remove unnecessary hwmon_device_unregister hwmon: (f75375s) Do not overwrite values read from registers hwmon: (f75375s) Shift control mode to the correct bit position hwmon: New subsystem maintainers hwmon: (lis3lv02d) Prevent NULL pointer dereference
2010-09-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: gfs2_logd should be using interruptible waits
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 06:38:00 +0000