summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller33-90/+137
Conflicts: net/batman-adv/bridge_loop_avoidance.c net/batman-adv/bridge_loop_avoidance.h net/batman-adv/soft-interface.c net/mac80211/mlme.c With merge help from Antonio Quartulli (batman-adv) and Stephen Rothwell (drivers/net/usb/qmi_wwan.c). The net/mac80211/mlme.c conflict seemed easy enough, accounting for a conversion to some new tracing macros. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10bnx2: Fix bug in bnx2_free_tx_skbs().Michael Chan1-3/+3
In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address when it gets to the last entry of the tx ring. We were not using the proper macro to skip the last entry when advancing the tx index. Reported-by: Zongyun Lai <zlai@vmware.com> Reviewed-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10IPoIB: fix skb truesize underestimatiomEric Dumazet1-4/+8
Or Gerlitz reported triggering of WARN_ON_ONCE(delta < len); in skb_try_coalesce() This warning tracks drivers that incorrectly set skb->truesize IPoIB indeed allocates a full page to store a fragment, but only accounts in skb->truesize the used part of the page (frame length) This patch fixes skb truesize underestimation, and also fixes a performance issue, because RX skbs have not enough tailroom to allow IP and TCP stacks to pull their header in skb linear part without an expensive call to pskb_expand_head() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Shlomo Pongartz <shlomop@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix memory leak - vlan_info structAmir Hanania1-0/+3
In driver reload test there is a memory leak. The structure vlan_info was not freed when the driver was removed. It was not released since the nr_vids var is one after last vlan was removed. The nr_vids is one, since vlan zero is added to the interface when the interface is being set, but the vlan zero is not deleted at unregister. Fix - delete vlan zero when we unregister the device. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller3-7/+19
Included changes: - fix a bug generated by the wrong interaction between the GW feature and the Bridge Loop Avoidance
2012-07-10qlge: Bumped driver version to 1.00.00.31Jitendra Kalsaria1-1/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Refactoring of ethtool stats.Jitendra Kalsaria1-138/+157
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Moving low level frame error to ethtool statistics.Jitendra Kalsaria3-27/+58
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fixed double pci free upon tx_ring->q allocation failure.Jitendra Kalsaria1-4/+6
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Added missing case statement to ethtool get_strings.Jitendra Kalsaria1-0/+5
Missing case was causing ethtool self test to print garbage value in extra info section. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Clean up ethtool set WOL routine.Jitendra Kalsaria1-9/+0
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fix ethtool WOL calls to operate only on devices that support WOL.Jitendra Kalsaria2-4/+18
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Cleanup atomic queue threshold check.Jitendra Kalsaria2-5/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fix TX queue stoppage due to full condition.Jitendra Kalsaria1-1/+11
TX queue was being stopped at beginning of send path instead of at the end when last descriptor is used. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: enable rx cut-thru modeRob Herring1-2/+3
Enabling RX cut-thru mode yields better performance as received frames start getting written to memory before a whole frame is received. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: set outstanding AXI bus transactions to 8Rob Herring1-1/+1
Increase the number of outstanding read and write AXI transactions from 1 to 8 for better performance. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: fix hang on rx refillRob Herring1-15/+12
Fix intermittent hangs in xgmac_rx_refill. If a ring buffer entry already had an skb allocated, then xgmac_rx_refill would get stuck in a loop. This can happen on a rx error when we just leave the skb allocated to the entry. [ 7884.510000] INFO: rcu_preempt detected stall on CPU 0 (t=727315 jiffies) [ 7884.510000] [<c0010a59>] (unwind_backtrace+0x1/0x98) from [<c006fd93>] (__rcu_pending+0x11b/0x2c4) [ 7884.510000] [<c006fd93>] (__rcu_pending+0x11b/0x2c4) from [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) [ 7884.510000] [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) from [<c0036abb>] (update_process_times+0x2b/0x48) [ 7884.510000] [<c0036abb>] (update_process_times+0x2b/0x48) from [<c004e8fd>] (tick_sched_timer+0x51/0x94) [ 7884.510000] [<c004e8fd>] (tick_sched_timer+0x51/0x94) from [<c0045527>] (__run_hrtimer+0x4f/0x1e8) [ 7884.510000] [<c0045527>] (__run_hrtimer+0x4f/0x1e8) from [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) [ 7884.510000] [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) from [<c00101d3>] (twd_handler+0x17/0x24) [ 7884.510000] [<c00101d3>] (twd_handler+0x17/0x24) from [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) [ 7884.510000] [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) from [<c0069aab>] (generic_handle_irq+0x17/0x2c) [ 7884.510000] [<c0069aab>] (generic_handle_irq+0x17/0x2c) from [<c000cc8d>] (handle_IRQ+0x35/0x7c) [ 7884.510000] [<c000cc8d>] (handle_IRQ+0x35/0x7c) from [<c033b153>] (__irq_svc+0x33/0xb8) [ 7884.510000] [<c033b153>] (__irq_svc+0x33/0xb8) from [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) [ 7884.510000] [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) from [<c02458ed>] (xgmac_poll+0x265/0x3bc) [ 7884.510000] [<c02458ed>] (xgmac_poll+0x265/0x3bc) from [<c029fcbf>] (net_rx_action+0xc3/0x200) [ 7884.510000] [<c029fcbf>] (net_rx_action+0xc3/0x200) from [<c0030cab>] (__do_softirq+0xa3/0x1bc) Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: calxedaxgmac: fix net timeout recoveryRob Herring1-0/+1
Fix net tx watchdog timeout recovery. The descriptor ring was reset, but the DMA engine was not reset to the beginning of the ring. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ll_temac: remove unnecessary setting of skb->devJon Mason1-1/+0
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10sunhme: remove unnecessary setting of skb->devJon Mason1-3/+0
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10sungem: remove unnecessary setting of skb->devJon Mason1-1/+0
skb->dev is being unnecessarily set by the driver's skb alloc routine (which is called in init and during rx). It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10sunbmac: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlcnic: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ksz884x: remove unnecessary setting of skb->devJon Mason1-3/+1
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10lantiq_etop: remove unnecessary setting of skb->devJon Mason1-1/+0
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10netxen: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10enic: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set after calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10lance: remove unnecessary setting of skb->devJon Mason1-3/+2
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10vxge/s2io: remove dead URLsJon Mason4-24/+3
URLs to neterion.com and s2io.com no longer resolve. Remove all references to these URLs in the driver source and documentation. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv6: optimize ipv6 addresses comparesEric Dumazet1-1/+23
On 64 bit arches having efficient unaligned accesses (eg x86_64) we can use long words to reduce number of instructions for free. Joe Perches suggested to change ipv6_masked_addr_cmp() to return a bool instead of 'int', to make sure ipv6_masked_addr_cmp() cannot be used in a sorting function. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix non-kernel-doc comments with kernel-doc start markersBen Hutchings36-892/+342
Convert doxygen (or similar) formatted comments to kernel-doc or unformatted comment. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings44-410/+378
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix non-kernel-doc comments with kernel-doc start markerBen Hutchings4-17/+8
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings46-103/+163
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Properly define functions with no parametersBen Hutchings2-2/+2
Defining a function with no parameters as 'T foo()' is the deprecated K&R style, and is not strictly equivalent to defining it as 'T foo(void)'. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10Merge branch 'metrics_restructure'David S. Miller29-731/+837
This patch series works towards the goal of minimizing the amount of things that can change in an ipv4 route. In a regime where the routing cache is removed, route changes will lead to cloning in the FIB tables or similar. The largest trigger of route metrics writes, TCP, now has it's own cache of dynamic metric state. The timewait timestamps are stored there now as well. As a result of that, pre-cowing metrics is no longer necessary, and therefore FLOWI_FLAG_PRECOW_METRICS is removed. Redirect and PMTU handling is moved back into the ipv4 routes. I'm sorry for all the headaches trying to do this in the inetpeer has caused, it was the wrong approach for sure. Since metrics become read-only for ipv4 we no longer need the inetpeer hung off of the ipv4 routes either. So those disappear too. Also, timewait sockets no longer need to hold onto an inetpeer either. After this series, we still have some details to resolve wrt. PMTU and redirects for a route-cache-less system: 1) With just the plain route cache removal, PMTU will continue to work mostly fine. This is because of how the local route users call down into the PMTU update code with the route they already hold. However, if we wish to cache pre-computed routes in fib_info nexthops (which we want for performance), then we need to add route cloning for PMTU events. 2) Redirects require more work. First, redirects must be changed to be handled like PMTU. Wherein we call down into the sockets and other entities, and then they call back into the routing code with the route they were using. So we'll be adding an ->update_nexthop() method alongside ->update_pmtu(). And then, like for PMTU, we'll need cloning support once we start caching routes in the fib_info nexthops. But that's it, we can completely pull the trigger and remove the routing cache with minimal disruptions. As it is, this patch series alone helps a lot of things. For one, routing cache entry creation should be a lot faster, because we no longer do inetpeer lookups (even to check if an entry exists). This patch series also opens the door for non-DST_HOST ipv4 routes, because nothing fundamentally cares about rt->rt_dst any more. It can be removed with the base routing cache removal patch. In fact, that was the primary goal of this patch series. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Remove inetpeer from routes.David S. Miller3-118/+6
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Calling ->cow_metrics() now is a bug.David S. Miller1-28/+2
Nothing every writes to ipv4 metrics any longer. PMTU is stored in rt->rt_pmtu. Dynamic TCP metrics are stored in a special TCP metrics cache, completely outside of the routes. Therefore ->cow_metrics() can simply nothing more than a WARN_ON trigger so we can catch anyone who tries to add new writes to ipv4 route metrics. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Kill dst_copy_metrics() call from ipv4_blackhole_route().David S. Miller1-1/+0
Blackhole routes have a COW metrics operation that returns NULL always, therefore this dst_copy_metrics() call did absolutely nothing. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Enforce max MTU metric at route insertion time.David S. Miller2-6/+3
Rather than at every struct rtable creation. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Maintain redirect and PMTU info in struct rtable again.David S. Miller5-154/+41
Maintaining this in the inetpeer entries was not the right way to do this at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10rtnetlink: Remove ts/tsage args to rtnl_put_cacheinfo().David S. Miller5-10/+5
Nobody provides non-zero values any longer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10inet: Kill FLOWI_FLAG_PRECOW_METRICS.David S. Miller6-18/+6
No longer needed. TCP writes metrics, but now in it's own special cache that does not dirty the route metrics. Therefore there is no longer any reason to pre-cow metrics in this way. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10inet: Minimize use of cached route inetpeer.David S. Miller5-22/+35
Only use it in the absolutely required cases: 1) COW'ing metrics 2) ipv4 PMTU 3) ipv4 redirects Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10inet: Remove ->get_peer() method.David S. Miller3-33/+0
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Remove tw->tw_peerDavid S. Miller2-15/+2
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Move timestamps from inetpeer to metrics cache.David S. Miller9-127/+149
With help from Lin Ming. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Kill set_dst_metric_rtt().David S. Miller1-6/+0
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Don't report route RTT metric value in cache dumps.David S. Miller2-18/+15
We don't maintain it dynamically any longer, so reporting it would be extremely misleading. Report zero instead. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 12:01:21 +0000