summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-03-05bcma: export bcma_find_coreHauke Mehrtens2-1/+3
This function is needed by the bcm47xx arch code to get the number of the ieee80211 core. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: add some missing sprom attributesHauke Mehrtens1-1/+75
This patch extends the sprom struct to contain all sprom attributes found in sprom version 1 to 9. This was done accordingly to the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: add alpha2Hauke Mehrtens1-0/+1
This member contains the country code encoded with two chars Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: fix per path sprom varsHauke Mehrtens1-1/+1
On sprom version 4 and 5 there are 4 values for pa_2g, pa_5gl, pa_5g and pa_5gh, for sprom version 8 and 9 there are only 3. Make the per path sprom store also work for older sprom versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: remove 5GHz antenna gain from spromHauke Mehrtens5-50/+24
There is no 2.4 GHz or 5GHz antenna gain stored in sprom. The sprom just stores the gain values for antenna 1 and 2 or 1 to 4 for more recent sprom versions. On old devices antenna 2 was used for 5 GHz wifi. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: sprom fix some sizes / signednessHauke Mehrtens1-8/+8
Some parts of the sprom struct are bigger than needed. The leddc and maxpwr values are just 8 bit long and not 16. rxpo2g and rxpo5g are signed I got these information for the open source part of the Broadcom SDK covering sprom version 1 to 9. rxpo2g contained a negative number on my bcm5354 based device, this cased an error and Broadcom SDK says this is signed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k: fix drv_tx_last_beacon on AR9003 by processing beacon tx statusFelix Fietkau2-3/+6
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k_hw: enable interrupts for beacon tx completion eventsFelix Fietkau1-1/+5
Not doing so could cause the tx status queue to overflow during longer periods of time without non-beacon tx. These events are also required for proper drv_tx_last_beacon handling. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k: do not call ath9k_hw_txprocdesc on AR9003 outside of the tx taskletFelix Fietkau1-1/+2
Since AR9003 uses a global tx status queue, processing tx status outside of the regular tx tasklet is dangerous and messes up hardware/software synchronization of tx status events. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05Revert "ath9k_hw: Fix false tx hung detection in AR9003 chips"Felix Fietkau2-12/+2
The approach of this change is flawed, as it triggers tx status processing from more callsites, yet the chips only have one global tx status queue. Subsequent patches will properly fix the issue that this one tried to address. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mwifiex: handle auto authentication mode correctlyAmitkumar Karwar5-10/+22
When authentication type is configured to NL80211_AUTHTYPE_AUTOMATIC, driver tries to connect using open mode. The association is failed if AP is configured in shared mode. This patch adds code to try association using shared mode as well if open mode association fails. Now since we returned exact error code in association response handler (instead of -1), corresponding changes are done in mwifiex_process_cmdresp(). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29carl9170: fix breakage from "mac80211: handle non-bufferable MMPDUs correctly"John W. Linville1-1/+1
That commit intended for 3.4 renamed IEEE80211_TX_CTL_POLL_RESPONSE as IEEE80211_TX_CTL_NO_PS_BUFFER. Meanwhile, "carl9170: fix frame delivery if sta is in powersave mode" added a reference to IEEE80211_TX_CTL_POLL_RESPONSE in the fixes stream for 3.3. This simple patch fixes that merge boo-boo. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29Merge branch 'master' of ↵John W. Linville10-34/+45
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-02-29ath9k: decouple RX error checking for DFSZefir Kurtisi1-6/+6
Previous RX error checking was done exclusive-or for different error types and caused DFS pulse events to be dropped when other error flags (e.g. CRC) were set simultaneously. This patch decouples PHY error processing from other types and ensures that all pulses detected by HW are accounted by the pattern detector. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29iwlegacy: remove unused enum il4965_calib_enabled_stateGreg Dietsche1-5/+0
Remove the enum il4965_calib_enabled_state because it is not used. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29iwlegacy: remove enum iw_calib and related codeGreg Dietsche4-32/+0
Remove the enum il_calib. It defined one identifier: IL_CALIB_MAX. Remove the function il4965_calib_free_results. It was doing nothing because IL_CALIB_MAX is zero. Next, remove calib_results from the il_priv structure and also remove the associated return type/struct il_calib_result. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29iwlegacy: Kconfig: Change Debug Option to be more clearGreg Dietsche1-1/+1
Since the menuconfig system doesn't indent the debug options for the 3945 /4965, add some text to make it clear which debug options are being configured. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29iwlegacy: Kconfig: Move Debugging OptionsGreg Dietsche1-39/+39
Move the debug options so they appear below the 3945 / 4965 options. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: handle non-bufferable MMPDUs correctlyJohannes Berg6-18/+30
This renames the IEEE80211_TX_CTL_POLL_RESPONSE TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also uses it for non-bufferable MMPDUs (all MMPDUs but deauth, disassoc and action frames.) Previously, mac80211 would let the MMPDU through but not set the flag so drivers supporting some hardware aids for avoiding the PS races would then reject the frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mwifiex: remove unnecessary enum MWIFIEX_802_11_WEP_STATUSAmitkumar Karwar7-44/+29
Instead of defining an 'enum', we can simply use 'u8' flag for WEP status. Rename 'wep_status' to 'wep_enabled' to match with 'wpa_enabled' and 'wpa2_enabled'. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mwifiex: remove redundant scan operationAmitkumar Karwar1-6/+0
It should have been removed by commit "mwifiex: use cfg80211 dynamic scan..." (7c6fa2a843..) after adding code to avoid an extra scan during association because scan entries are valid for 15 seconds in cfg80211 stack. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: make deauth/disassoc sequence more naturalJohannes Berg1-37/+47
The association sequence looks (roughly) like this now: * set BSSID * set station to EXIST state * send auth * set station to AUTH state * send assoc * set station to ASSOC state * set BSS info to associated In contrast, the deauth/disassoc sequence is the other way around: * clear BSSID/BSS info state * remove station * send deauth/disassoc (in some cases the last two steps are reversed.) This patch encodes the entire sequence in the ieee80211_set_disassoc() function and changes it to be like this, for good measure with an explicit flush: * send deauth/disassoc * flush * remove station * clear BSSID/BSS info state At least iwlwifi gets confused with the other sequence in P2P mode and complains that it wasn't able to flush the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: fix ieee80211_set_disassoc() sending DelBAJohannes Berg1-3/+3
When ieee80211_set_disassoc() is called with the tx argument set to true, it will send DelBA out to the peer. This isn't useful or necessary in a few cases where we do it today, those being when we lost the connection or when the supplicant explicitly asked us to not tell the AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: dont call cfg80211 from ieee80211_send_deauth_disassocJohannes Berg1-33/+38
Instead of calling cfg80211 in ieee80211_send_deauth_disassoc() pass out the frame and call it from the caller. That saves the SKB allocation if we don't actually want to send the frame and enables us to make the ordering smarter in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29cfg80211: remove cookies from callbacksJohannes Berg5-33/+25
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29ipw2x00: remove ipw2100_rates_11b[]Stanislav Yakovlev1-9/+2
It's just a duplicate of ipw2100_bg_rates[]. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29zd1211rw: wait between setting hash table and powering radio onFlorian Fainelli1-1/+11
I am running Debian testing kernel 3.1.0-1-amd64, using a 079b:0062 Sagem XG-76NA 802.11bg stick. Upon zd1211rw interface bringup (ifconfig wlan0 up) I get the following timeout: [ 950.330573] zd1211rw 1-3:1.0: phy2 [ 955.108510] zd1211rw 1-3:1.0: firmware version 4725 [ 955.148532] zd1211rw 1-3:1.0: zd1211b chip 079b:0062 v4810 high 00-19-70 AL2230_RF pa0 g--NS [snip] [ 955.204072] zd1211rw 1-3:1.0: error ioread32(CR_REG1): -110 A second ifconfig wlan0 up brings the interface up without problems. After a bit more debugging, the call trace is the following: [10241.028130] zd1211rw 1-3:1.0: zd_chip_lock_phy_regs: error ioread32(CR_REG1): -110 [10241.028140] zd1211rw 1-3:1.0: zd_switch_radio_on: failed to lock PHY regs [10241.028148] zd1211rw 1-3:1.0: zd_op_start: failed to set radio on Adding a 10 milliseconds delay between the call to set_mc_hash() and zd_chip_switch_radio_on() allows successful interface bringups in all cases and matches what the vendor driver did. Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mwifiex: reset encryption mode flag before associationAmitkumar Karwar1-0/+1
Recent commit "mwifiex: clear previous security setting during association" fixes association failure problems observed in some corner cases by clearing previous security setting before each association. We should reset encryption mode flag as well. This patch takes care of it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29carl9170: fix frame delivery if sta is in powersave modeChristian Lamparter1-3/+5
Nicolas Cavallari discovered that carl9170 has some serious problems delivering data to sleeping stations. It turns out that the driver was not honoring two important flags (IEEE80211_TX_CTL_POLL_RESPONSE and IEEE80211_TX_CTL_CLEAR_PS_FILT) which are set on frames that should be sent although the receiving station is still in powersave mode. Cc: stable <stable@vger.kernel.org> Reported-by: Nicolas Cavallari <Nicolas.Cavallari@lri.fr> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29carl9170: Fix memory accounting when sta is in power-save mode.Nicolas Cavallari1-0/+1
On Access Point mode, when transmitting a packet, if the destination station is in powersave mode, we abort transmitting the packet to the device queue, but we do not reclaim the allocated memory. Given enough packets, we can go in a state where there is no packet on the device queue, but we think the device has no memory left, so no packet gets transmitted, connections breaks and the AP stops working. This undo the allocation done in the TX path when the station is in power-save mode. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27iwlwifi: fix IDI compilationEmmanuel Grumbach1-1/+1
This is a fixup for my: iwlwifi: kill iwl_bus.h Please fold them into one patch for upstream Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: update pci subsystem idWey-Yi Guy3-3/+16
Update the pci subsystem id and product name for 6005 series devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: one more sku added to 6x35 seriesWey-Yi Guy1-0/+1
Add new sku to 6x35 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: iwl-trans.h doesn't need all these includesEmmanuel Grumbach2-4/+5
We can use forward declaration for the relevant struct since they aren't dereferenced in the header file. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: document the operational modeEmmanuel Grumbach2-8/+34
Also add a might_sleep to enforce the context requirements. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: remove iwl_reset_traffic_log from sharedEmmanuel Grumbach2-4/+2
It is op_mode related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: remove iwl_print_rx_config_cmd from sharedEmmanuel Grumbach4-14/+15
It is op_mode related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: kill iwl_bus.hEmmanuel Grumbach9-188/+29
No one needs it any more Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: eeprom gets transport and not busEmmanuel Grumbach3-77/+80
This is temporary, but at least we can now throw the bus away and move the iwl_pci_{probe,remove} functions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: move eeprom defines to iwl-eeprom.cEmmanuel Grumbach2-3/+4
They don't need to be in iwl-dev.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: remove a few dereferences to iwl_priv from the tansportEmmanuel Grumbach1-4/+3
The transport should not dereference the iwl_priv pointer. Remove a few of those. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's fw_errorEmmanuel Grumbach7-5/+21
Export it as "nic_error" notification, the error handling will be in the op_mode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's set_hw_rf_killEmmanuel Grumbach7-7/+18
Export it as "hw_rf_kill" notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's stop/start queueEmmanuel Grumbach6-6/+31
Export them as "queue_full" and "queue_not_full" notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's rxEmmanuel Grumbach6-7/+21
This is the op_mode's Rx handler. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's free skbEmmanuel Grumbach7-3/+34
This handler allows the transport layer to free an skb from the op_mode. This can happen when the driver is stopped while Tx packets are pending in the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: use sparse compliant __aligned__ attributeEmmanuel Grumbach2-2/+2
Sparse prefers __aligned(sizeof(void *)); Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize the op_modeEmmanuel Grumbach12-65/+204
Define the op_mode as an interface with its ops. All the functions of the op_mode are "private", but its ops is made public in iwl-op-mode.h. The drv object starts the op_mode by using the start function in the public ops. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: rename iwl_remove to iwl_op_mode_dvm_stopEmmanuel Grumbach3-3/+3
iwl_remove stops the wifi flows, so rename. Moreover, we can possibly stop the wifi flows even if the driver is statically compiled in the kernel, so remove the __devexit pragma. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: drv object can release its own memoryEmmanuel Grumbach3-2/+21
Move that code to the iwl-drv.c Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 04:55:08 +0000