summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-09-19mfd: 88pm860x: Move initilization codeHaojian Zhuang3-167/+159
Move probe() and other functions from 88pm860x-i2c.c to 88pm860x-core.c. Since it could benefit to handle DT information. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: 88pm860x: Avoid to check resource for preg regulatorHaojian Zhuang2-20/+20
Since PREG regulator is the only one regulator in 88PM8606, and other regulators are in 88PM8607. Checking resource as identifying regulator is not a good way. We can use NULL resource to indentify PREG regulator. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19regulator: 88pm860x: Add pre-regulator support for 88pm860x regulatorJett.Zhou1-0/+66
Pre-regulator of 88pm8606 is mainly for support charging based on vbus, it needs to be enabled for charging battery, and will be disabled in some exception condition like over-temp. Add the pre-regulator support for 88pm860x regulator driver. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: max8925: Remove array in regulator platform dataHaojian Zhuang3-93/+356
Remove array in parent's platform data. Use struct regulator_init_data as regulator device's platform data directly. So a lot of pdata are added into parent's platform data. And voltage out register offset is used as IORESOURCE_REG to distinguish different regualtor devices. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: max8925: Use register offset as REG in backlightHaojian Zhuang2-55/+55
Remove the register offset definition. All these register offset are transfered as IORESOURCE_REG resources. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19gpio: Add basic support for TWL6040 GPOsPeter Ujfalusi3-0/+145
TWL6040 provides GPO lines to be used for controlling external devices.The number of lines different between versions: twl6040 have 3 GPO while TWL6041 have 1. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: twl6040: Add twl6040-gpio childPeter Ujfalusi3-4/+29
Add needed platform data structure and code to be able to load the GPO child of twl6040. Update the devicetree binding documentation at the same time. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: twl6040: Fix GPO maskPeter Ujfalusi1-1/+1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: Use IRQF_ONESHOT for max8925Fengguang Wu1-2/+2
Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: Use IRQF_ONESHOT for twl6040Fengguang Wu1-1/+1
Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: Use IRQF_ONESHOT for 88pm860xFengguang Wu1-1/+1
Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: max8907: Add power off controlStephen Warren3-0/+28
Add DT property "maxim,system-power-controller" to indicate whether the PMIC is in charge of controlling the system power. If this is set, the driver will provide the pm_power_off() function. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19pwm: Move TWL6030 PWM driver to PWM frameworkThierry Reding6-61/+86
This commit moves the driver to drivers/pwm and converts it to the new PWM framework. In order for this to work properly, register the PWM as child of the multi-function TWL6030 device. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19mfd: twl: Replace twl_has_*() macros by IS_ENABLED()Thierry Reding1-92/+25
Instead of reinventing macros for the same purpose, use the standard macros. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18input: twl4030-vibra: Support for DT booted kernelPeter Ujfalusi1-2/+16
Add support when the kernel has been booted with DT blob. In this case the pdata is NULL, we need to reach up to the core node and check if the codec part has been enabled to determine if we need to coexist with the codec or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18mfd: twl4030-audio: Add DT supportPeter Ujfalusi2-7/+93
Support for loading the twl4030 audio module via devicetree. Sub devices for codec and vibra will be created as mfd devices once the core MFD driver is loaded when the kernel is booted with a DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18dt: Add empty of_find_node_by_name() functionPeter Ujfalusi1-0/+6
This commit adds an empty of_find_node_by_name() function for !CONFIG_OF builds. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18mfd: twl4030-audio: Get audio MCLK via twl-core API instead of pdataPeter Ujfalusi1-1/+1
twl-core has API to get the boot time configured HFCLK rate which has the same rate as the audio MCLK. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18mfd: twl-core: Add API to query the HFCLK ratePeter Ujfalusi2-0/+33
CFG_BOOT register's HFCLK_FREQ field hold information about the used HFCLK frequency. Add possibility for users to get the configured rate based on this register. This register was configured during boot, without it the chip would not operate correctly, so we can trust on this information. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18mfd: twl4030-audio: Rearange and clean-up the probe functionPeter Ujfalusi1-18/+16
To facilitate the device tree support the probe function need to be rearanged. Small cleanup in the APLL frequency selection part as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18mfd: twl4030-audio: Convert to use devm_kzallocPeter Ujfalusi1-9/+6
To clean up the module probe and remove functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18mfd: twl4030-audio: Clean up MODULE_* and platform_driver partPeter Ujfalusi1-4/+4
Place the MODULE_* lines in the same block and add MODULE_DESCRIPTION. Rearange the platform_driver structure at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-18mfd: Use the AB8500's IRQ domain to convert hwirq to virqLee Jones1-1/+2
Before the AB8500 had its own IRQ domain, the IRQ handler would take the fired local IRQ (hwirq) and add it to the irq_base to convert it to an IRQ number which Linux would understand (virq). However, the IRQ base is not always used anymore since we can make use of Linear domains. It's better to use the AB8500 hwirq -> virq mapping helper function to convert them instead. That's what we do here. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17mfd: anatop-mfd: remove anatop driverDong Aisheng4-173/+0
The anatop registers are accessed via syscon now, no one will use mfd anatop driver anymore, remove it. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17regulator: anatop-regulator: Convert to use syscon to access anatop registerDong Aisheng5-43/+43
Using syscon to access anatop register. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17ARM: imx6q: Add iomuxc gpr support into sysconDong Aisheng2-0/+324
Include headfile for easy using. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17mfd: Add syscon driver based on regmapDong Aisheng5-0/+228
Add regmap based syscon driver. This is usually used for access misc bits in registers which does not belong to a specific module, for example, IMX IOMUXC GPR and ANATOP. With this driver, client can use generic regmap API to access registers which are registered into syscon. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17mfd: Enable the tc3589x for Device TreeLee Jones1-3/+40
Here we provide a means to probe and extract vital information from Device Tree when booting with it enabled. Without this patch sub-devices wouldn't be able to reference the tc3589x from Device Tree. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17mfd: Provide the tc3589x with its own IRQ domainLee Jones2-26/+48
In preparation for Device Tree enablement all IRQ controllers should control their own IRQ domain. This patch provides just that. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17mfd: palmas: Drop kfree of devm_kzalloc's dataJulia Lawall1-1/+0
Using kfree to free data allocated with devm_kzalloc causes double frees. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ x = devm_kzalloc(...) ... ?-kfree(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17mfd: Add MAX8907 core driverGyungoh Yoo5-0/+665
The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The original driver was written by: * Gyungoh Yoo <jack.yoo@maxim-ic.com> Various fixes and enhancements by: * Jin Park <jinyoungp@nvidia.com> * Tom Cherry <tcherry@nvidia.com> * Prashant Gaikwad <pgaikwad@nvidia.com> * Dan Willemsen <dwillemsen@nvidia.com> * Laxman Dewangan <ldewangan@nvidia.com> During upstreaming, I (swarren): * Converted to regmap. * Converted to regmap-irq. * Allowed probing from device tree. * Renamed from max8907c->max8907, since the driver covers at least the C and B revisions. * General cleanup. Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> #v3 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-16mfd: lpc_ich: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston2-0/+15
This patch adds the Watchdog Timer Device IDs for the Intel Lynx Point-LP PCH. The Device IDs are defined in drivers/mfd/lpc_ich.c Signed-off-by: James Ralston <james.d.ralston@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-16mfd: MAX77693: Fix NULL pointer error when initializing irqsChanwoo Choi2-7/+26
This patch initialize register map of MUIC device because mfd driver of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of Maxim MAX77693 is initialized before call max77693-muic probe() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-16mfd: MAX77693: Fix interrupt handling bugChanwoo Choi1-5/+31
This patch fix bug related to interrupt handling for MAX77693 devices. - Unmask interrupt masking bit for charger/flash/muic to revolve that interrupt isn't happened when external connector is attached. - Fix wrong regmap instance when muic interrupt is happened. This patch were discussed and confirm discussion about this patch on below url: http://lkml.org/lkml/2012/7/16/118 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: ab3100: Split ab3100 headers out of abx500.hMarcus Cooper5-117/+133
The U8500 has its own set of separate header, so the abx500 becomes completely abstract. Do the same split for the AB3100 legacy ASIC. Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: 88pm860x: Fix section mismatch warningHaojian Zhuang1-3/+3
WARNING: drivers/built-in.o(.data+0x1e3c8): Section mismatch in reference from the variable bk_devs to the variable .devinit.data:bk0_resources The variable bk_devs references the variable __devinitdata bk0_resources If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console So add __devinitdata on bk_devs, led_devs & reg_devs. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: dt: tps65910: Add power off controlBill Huang3-0/+29
Add DT property "ti,system-power-controller" telling whether or not this pmic is in charge of controlling the system power, so the power off routine can be hooked up to system call "pm_power_off". Based on the work by: Dan Willemsen <dwillemsen@nvidia.com> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: dt: tps6586x: Add power off controlBill Huang3-0/+26
Add DT property "ti,system-power-controller" telling whether or not this pmic is in charge of controlling the system power, so the power off routine can be hooked up to system call "pm_power_off". Based on the work by: Dan Willemsen <dwillemsen@nvidia.com> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: ab8500: Make ab8500_irq_get_virq() staticLee Jones2-19/+16
MFD core now takes care of HWIRQ <-> VIRQ mapping, so the helper ab8500_irq_get_virq() is no longer used by ab8500 subordinate devices to obtain a Linux wide Virtual IRQ. The AB8500 IRQ controller still uses it internally though, so we'll just hide it from the rest of the world by making it static instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14gpio: gpio-ich: Share ownership of GPIO groupsJean Delvare3-12/+97
The ICH chips have their GPIO pins organized in 2 or 3 independent groups of 32 GPIO pins. It can happen that the ACPI BIOS wants to make use of pins in one group, preventing the OS to access these. This does not prevent the OS from accessing the other group(s). This is the case for example on my Asus Z8NA-D6 board. The ACPI BIOS wants to control GPIO 18 (group 1), while I (the OS) need to control GPIO 52 and 53 (group 2) for SMBus multiplexing. So instead of checking for ACPI resource conflict on the whole I/O range, check on a per-group basis, and consider it a success if at least one of the groups is available for the OS to use. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Aaron Sierra <asierra@xes-inc.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: arizona: Remove unused variableMark Brown1-1/+1
Left over as bitrot from previous changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: wm8994: Update WM1811 register patches for latest evaluationMark Brown1-1/+1
Further evaluation of the device has yielded some improvements to the device configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: wm8994: Implement support for WM1811 devices with higher cust_idsMark Brown1-1/+1
Higher cust_ids have had the device revision field reset so need different handling of GPIO6. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: arizona: Suppress needless calls to the primary IRQMark Brown1-3/+15
We can read back if the primary IRQ is asserted from the register map, meaning that we can suppress polling of the interrupt status registers when only the AoD IRQ domain is asserting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14mfd: core: Push irqdomain mapping out into devicesMark Brown54-112/+125
Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-11mfd: arizona: Disable control interface error reporting for early devicesMark Brown1-7/+28
Early revisions of the initial Arizona-based devices can generate spurious control interface errors in certain circumstances. Avoid causing confusion by disabling the control interface error reporting on these devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-11mfd: 88pm860x: Use REG resource in regulatorHaojian Zhuang3-71/+217
Since IORESOURCE_IO is changed to IORESOURCE_REG in 88pm860x driver, update self-defined IORESOURCE_IO resource to register offset that is IORESOURCE_REG in regulator driver. And split regulator platform data array into scattered platform data. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-11mfd: 88pm860x: Use REG in leds resourceHaojian Zhuang3-159/+143
Since the resources of 88pm860x leds are changed from IORESOURCE_IO to IORESOURCE_REG that is register offset, change the original self-defined IORESOURCE_IO to register offset. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-11mfd: 88pm860x: Use REG resource for backlightHaojian Zhuang3-111/+89
Now resource of 88pm860x backlight is changed from IORESOURCE_IO to IORESOURCE_REG. In original driver, the resource is using self-defined IORESOURCE_IO. So change the resource to register offset to match the definition of IORESOURCE_REG. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-11mfd: max8925: Convert to IORESOURCE_REGMark Brown2-15/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 22:09:02 +0000