summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-05-22Merge branches 'upstream-fixes', 'wacom' and 'waltop' into for-linusJiri Kosina11-148/+461
Conflicts: drivers/hid/hid-core.c
2012-05-22Merge branch 'upstream' into for-linusJiri Kosina13-32/+307
Conflicts: drivers/hid/hid-core.c
2012-05-22Merge branches 'device-groups', 'logitech' and 'multitouch' into for-linusJiri Kosina4-89/+287
2012-05-21HID: wacom: fix build breakage without CONFIG_LEDS_CLASSDavid Rientjes1-1/+1
CONFIG_HID_WACOM must depend on CONFIG_LEDS_CLASS, otherwise CONFIG_NEW_LEDS may be disabled. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-21HID: waltop: Extend barrel button fixNikolai Kondrashov1-38/+7
Extend Waltop barrel button fix to all models: ignore reported pressure when a barrel button is pressed, because it is rarely correct. Report zero pressure in such cases instead. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-17HID: hyperv: Set the hid drvdata correctlyK. Y. Srinivasan1-1/+2
Set the hid drvdata prior to invoking hid_add_device() as hid_add_device() expects this state to be set. This bug was introduced in the recent hid changes that were made in 07d9ab4f0e52cb ("HID: hid-hyperv: Do not use hid_parse_report() directly"). Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Unify speed settingPrzemo Firszt1-55/+47
This patch unifies speed setting for both supported tablets. Functionality of "wacom_poke" (used only by Graphire) is now in "wacom_set_features". Reporting speed for both tablets can be changed by somethinkg like: echo 1 > /sys/class/bluetooth/hci0/hci0:1/{device No}/speed Accepted values: 0 - low speed, 1 - high speed. The way of changing reporting speed is the same for Graphire and Intuos4 WL. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Add speed setting for Intuos4 WLPrzemo Firszt1-4/+13
Add option to change reporting speed for Intuos4 WL. The option is only internal to the module, but it will be extended to allow control over sysfs, as it is already implemented for Graphire. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Move Graphire raport header check.Przemo Firszt1-5/+7
That check is valid only for Wacom Graphire, as the device raports always start with 0x03. Intuos4 WL high-speed raports begin with 0x04, so the check would be filtering out valid reports. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-15HID: uclogic: Add support for UC-Logic TWHL850Nikolai Kondrashov3-0/+143
Add support for UC-Logic Wireless Tablet TWHL850. It is known to be sold as Genius MousePen M508W. This tablet has a bug in the default (compatibility) mode which is used in this driver: frame button assignments are mixed up. This is to be fixed with a driver supporting the vendor-specific protocol. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-14HID: explain the signed/unsigned handling in hid_add_field()Jiri Kosina1-0/+1
Put a comment that clarifies the condition that handles both signed and unsigned case for logical min/max in hid_add_field(). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-14HID: handle logical min/max signedness properly in parsersrinivas pandruvada1-3/+9
When logical maximum is 0xffffffff, the parser fails even if logical minimum is more than 0. By HID specification this is a valid combination. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11HID: logitech: read all 32 bits of report type bitfieldJonathan Nieder1-2/+3
On big-endian systems (e.g., Apple PowerBook), trying to use a logitech wireless mouse with the Logitech Unifying Receiver does not work with v3.2 and later kernels. The device doesn't show up in /dev/input. Older kernels work fine. That is because the new hid-logitech-dj driver claims the device. The device arrival notification appears: 20 00 41 02 00 00 00 00 00 00 00 00 00 00 00 and we read the report_types bitfield (02 00 00 00) to find out what kind of device it is. Unfortunately the driver only reads the first 8 bits and treats that value as a 32-bit little-endian number, so on a powerpc the report type seems to be 0x02000000 and is not recognized. Even on little-endian machines, connecting a media center remote control (report type 00 01 00 00) with this driver loaded would presumably fail for the same reason. Fix both problems by using get_unaligned_le32() to read all four bytes, which is a little clearer anyway. After this change, the wireless mouse works on Hugo's PowerBook again. Based on a patch by Nestor Lopez Casado. Addresses http://bugs.debian.org/671292 Reported-by: Hugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar> Inspired-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11HID: wacom: Add LED selector control for Wacom Intuos4 WLPrzemo Firszt3-0/+135
Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4 different LEDs on the tablet and they can be turned on by something like: echo 50 > /sys/class/leds/(device # here)\:selector\:1/brightness Only one can be lit at a time. The brightness range is 0 to 127. This patch also contains short ABI description. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-10HID: hid-multitouch: fix wrong protocol detectionBenjamin Tissoires1-12/+46
The previous implementation introduced a randomness in the splitting of the different touches reported by the device. This version is more robust as we don't rely on hi->input->absbit, but on our own structure. This also prepares hid-multitouch to better support Win8 devices. [Jiri Kosina <jkosina@suse.cz>: fix build] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-09HID: wiimote: Fix IR data parserDavid Herrmann1-11/+5
We incorrectly parse incoming IR data. The extra byte contains the upper bits and not the lower bits of the x/y coordinates. User-space expects absolute position data from us so this patch does not break existing applications. On the contrary, it extends the virtual view and fixes garbage reports for margin areas of the virtual screen. Cc: stable@kernel.org Reported-by: Peter Bukovsky <bukovsky.peter@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-07HID: wacom: Add tilt reporting for Intuos4 WLPrzemo Firszt1-0/+7
Tile is reported to input subsystem as reported by the device without any modifications. It means that tilt X/Y range is 0 to 127 and it's not centered on zero. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05HID: multitouch: MT interface matching for BaantoJiri Kosina1-1/+1
Baanto device entry needs to be altered in the same way other device entries have been changed in 2c2110e90b5 ("HID: hid-multitouch: Only match MT interfaces"). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05Merge branch 'multitouch' into device-groupsJiri Kosina3-0/+8
I am merging multitouch branch into device-groups so that support for Baanto device can be adjusted accordingly to the new autoloading patches. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05HID: hid-multitouch: Only match MT interfacesHenrik Rydberg1-70/+73
All known hid-multitouch devices currently match any device group. However, some devices present interfaces belonging to different groups, resulting in a race between the hid-generic and hid-multitouch modules. This patch narrows the MT device list to match only HID_GROUP_MULTITOUCH, which solves the problem. As an exception, the USB_DEVICE_ID_CYPRESS_TRUETOUCH panel is not modified, in order to suppress the unwanted extra interfaces of the device. Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Create a common generic driverHenrik Rydberg5-42/+68
Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: hid-multitouch: Switch to device groupsHenrik Rydberg4-92/+24
Switch the driver over to device group handling. By adding the HID_GROUP_MULTITOUCH group to hid-core, hid-generic will no longer match multitouch devices. By adding the HID_GROUP_MULTITOUCH entry to the device list, hid-multitouch will match all unknown multitouch devices, and udev will automatically load the module. Since HID_QUIRK_MULTITOUCH never gets set, the special quirks handling can be removed. Since all HID MT devices have HID_DG_CONTACTID, they can be removed from the hid_have_special_driver list. With this patch, the unknown device ids are no longer NULL, so the code is modified to check for the generic entry instead. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Create a generic device groupHenrik Rydberg4-16/+9
Devices that do not have a special driver are handled by the generic driver. This patch does the same thing using device groups; Instead of forcing a particular driver, the appropriate driver is picked up by udev. As a consequence, one can now move a device from generic to specific handling by a simple rebind. By adding a new device id to the generic driver, the same thing can be done in reverse. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Allow bus wildcard matchingHenrik Rydberg3-2/+4
Most HID drivers do not need to know what bus driver is in use. A generic group driver can drive any hid device, and the device list should not need to be duplicated for each new bus. This patch adds wildcard matching to the HID bus, simplifying device list handling for group drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Scan the device for group info before adding itHenrik Rydberg2-0/+67
In order to allow the report descriptor to influence the hid device properties, one needs to parse the descriptor early, without reference to any driver. Scan the descriptor for group information during device add, before the device has been broadcast to userland. The device modalias will contain group information which can be used to differentiate between modules. For starters, just handle the generic group. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Add device group to modaliasHenrik Rydberg4-3/+27
HID devices are only partially presented to userland. Hotplugged devices emit events containing a modalias based on the basic bus, vendor and product entities. However, in practise a hid device can depend on details such as a single usb interface or a particular item in a report descriptor. This patch adds a device group to the hid device id, and broadcasts it using uevent and the device modalias. The module alias generation is modified to match. As a consequence, a device with a non-zero group will be processed by the corresponding group driver instead of by the generic hid driver. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Handle driver-specific device descriptor in coreHenrik Rydberg2-32/+94
The low-level driver can read the report descriptor, but it cannot determine driver-specific changes to it. The hid core can fixup and parse the report descriptor during driver attach, but does not have direct access to the descriptor when doing so. To be able to handle attach/detach of hid drivers properly, a semantic change to hid_parse_report() is needed. This function has been used in two ways, both as descriptor reader in the ll drivers and as a parsor in the probe of the drivers. This patch splits the usage by introducing hid_open_report(), and modifies the hid_parse() macro to call hid_open_report() instead. The only usage of hid_parse_report() is then to read and store the device descriptor. As a consequence, we can handle the report fixups automatically inside the hid core. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Nikolai Kondrashov <spbnick@gmail.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: hid-logitech: Collect report descriptors before sendingHenrik Rydberg1-42/+29
The current code allows several consecutive calls to hid_parse_report(), which may have happened to work before, but would cause a memory leak and generally be incorrect. This patch collects all the reports before sending them once. Cc: Nestor Lopez Casado <nlopezcasad@logitech.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: hid-hyperv: Do not use hid_parse_report() directlyHenrik Rydberg1-2/+12
Upcoming changes will split the semantics of hid_parse_report() and hid_parse(), so make sure drivers use hid_parse() in probe(). Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-30HID: fix return value of hidraw_report_event() when !CONFIG_HIDRAWJiri Kosina1-1/+1
Commit b6787242f327 ("HID: hidraw: add proper error handling to raw event reporting") forgot to update the static inline version of hidraw_report_event() for the case when CONFIG_HIDRAW is unset. Fix that up. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-27HID: hidraw: add proper error handling to raw event reportingJiri Kosina4-14/+27
If kmemdup() in hidraw_report_event() fails, we are not propagating this fact properly. Let hidraw_report_event() and hid_report_raw_event() return an error value to the caller. Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-27HID: hiddev: Use vzalloc to allocate hiddev_listHavard Skinnemoen1-4/+5
Everytime a HID device is opened, a new hiddev_list is allocated with kzalloc. This requires 64KB of physically contiguous memory, which could easily push a heavily loaded system over the edge. Allocating the same amount of memory with vmalloc shouldn't be nearly as demanding, so let's do that instead. The memory isn't used for DMA and doesn't look particularly performance sensitive, so this should be safe. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-24HID: add Kconfig text to HID_BATTERY_STRENGTHJiri Kosina1-1/+5
HID_BATTERY_STRENGTH is missing both help text and description text. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: hid-lg4ff: remove unused label in !LEDS_CLASS caseJiri Kosina1-2/+1
'out' label will be unused of CONFIG_LEDS_CLASS is unset. Move it into conditional block. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: hid-lg4ff: Update CommentsSimon Wood1-3/+4
Updated comments to say that this driver now supports all Logitech gaming wheels, and not just the WiiWheel. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: hid-lg4ff: Add support for G27 LEDsSimon Wood1-1/+157
This patch adds supports for controlling the LED 'tachometer' on the G27 wheel, via the LED subsystem. The 5 LEDs are arranged from right (1=grn, 2=grn, 3=yel, 4=yel, 5=red) and 'mirrored' to the left (10 LEDs in total). Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: apple: Add Apple wireless keyboard 2011 ANSI PIDAlexey Kaminsky1-0/+3
Signed-off-by: Alexey Kaminsky <me@akaminsky.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-20Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "Fix for one particular device (bluetooth Tivo Slide) and change of 'default y' -> 'default n' for CONFIG_HID_BATTERY_STRENGTH which I overlooked in the initial merge of the battery support" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: default HID_BATTERY_STRENGTH to no HID: tivo: fix support for bluetooth version of tivo Slide
2012-04-20Merge branch 'for-linus' of ↵Linus Torvalds6-18/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68k arch fixes from Greg Ungerer: "This contains four fixes for 3.4. Two fix and clean up compilation for the nommu 68x328 CPU targets. The other two fix the platform definition and multi-function pin setup of the second eth interface on the ColdFire 5275 SoC." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFire m68knommu: fix id number for second eth device on 5275 ColdFire m68knommu: move and fix the 68VZ328 platform bootlogo.h m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328
2012-04-20HID: multitouch: Add support for Baanto touchscreenJiri Kosina3-0/+8
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-19Merge branch 'for-3.4' of git://linux-nfs.org/~bfields/linuxLinus Torvalds3-5/+6
Pull nfsd bugfixes from J. Bruce Fields: "One bugfix, and one minor header fix from Jeff Layton while we're here" * 'for-3.4' of git://linux-nfs.org/~bfields/linux: nfsd: include cld.h in the headers_install target nfsd: don't fail unchecked creates of non-special files
2012-04-19Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds16-24/+56
Pull drm fixes from Dave Airlie: "It's like a grab bag of one liners: - core: fix page flip error path, reorder object teardown. - usb: fix the drm_usb module license. - i915: VT switch on SNB with non-native modes fix, and a regression fix from 3.3. - radeon: missing unreserve on SI, AGP/VRAM setup fix (fixes radeon on IA64, but its a generic bug), an rn50 regression from 3.3, turn off MSIs on rv515 (it loses rearms every so often)." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: nouveau: Set special lane map for the right chipset drm/radeon: fix load detect on rn50 with hardcoded EDIDs. drm: Releasing FBs before releasing GEM objects during drm_release drm/nouveau/pm: don't read/write beyond end of stack buffer drivers: gpu: drm: gma500: mdfld_dsi_output.h: Remove not unneeded include of version.h radeon: fix r600/agp when vram is after AGP (v3) drm: fix page_flip error handling drm/radeon/kms: fix the regression of DVI connector check drm/usb: fix module license on drm/usb layer. drm/i915: Do not set "Enable Panel Fitter" on SNB pageflips drm/i915: Hold mode_config lock whilst changing mode for lastclose() drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2 drm/radeon: disable MSI on RV515 drm/i915: don't clobber the special upscaling lvds timings
2012-04-19Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-21/+43
Pull KVM updates from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: lock slots_lock around device assignment KVM: VMX: Fix kvm_set_shared_msr() called in preemptible context KVM: unmap pages from the iommu when slots are removed KVM: PMU emulation: GLOBAL_CTRL MSR should be enabled on reset
2012-04-19nouveau: Set special lane map for the right chipsetHenrik Rydberg1-1/+1
The refactoring of the nv50 logic, introduced in 8663bc7c, modified the test for the special lane map used on some Apple computers with Nvidia chipsets. The tested MBA3,1 would still boot, but resume from suspend stopped working. This patch restores the old test, which fixes the problem. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19drm/radeon: fix load detect on rn50 with hardcoded EDIDs.Dave Airlie1-1/+1
When the force changes went in back in 3.3.0, we ended up returning disconnected in the !force case, and the connected in when forced, as it hit the hardcoded check. Fix it so all exits go via the hardcoded check and stop spurious modesets on platforms with hardcoded EDIDs. Reported-by: Evan McNabb (Red Hat) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19drm: Releasing FBs before releasing GEM objects during drm_releasePrathyush1-3/+3
During DRM release, all the FBs and gem objects are released. If a gem object is being used as a FB and set to a crtc, it must not be freed before releasing the framebuffer first. If FBs are released first, the crtc using the FB is disabled first so now the GEM object can be freed safely. The CRTC will be enabled again when the driver restores fbdev mode. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19drm/nouveau/pm: don't read/write beyond end of stack bufferJim Meyering1-0/+1
NUL-terminate after strncpy. If the parameter "profile" has length 16 or more, then strncpy leaves "string" with no NUL terminator, so the following search for '\n' may read beyond the end of that 16-byte buffer. If it finds a newline there, then it will also write beyond the end of that stack buffer. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19drivers: gpu: drm: gma500: mdfld_dsi_output.h: Remove not unneeded include ↵Marcos Paulo de Souza1-1/+0
of version.h The output of "make versioncheck" points a incorrect include of version.h in the drivers/gpu/drm/gma500/mdfld_dsi_output.h: drivers/gpu/drm/gma500/mdfld_dsi_output.h: 32 linux/version.h not needed. If we take a look in the file, we can agree to remove it. Cc: David Airlie <airlied@linux.ie> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19radeon: fix r600/agp when vram is after AGP (v3)Jerome Glisse2-4/+4
If AGP is placed in the middle, the size_af is off-by-one, it results in VRAM being placed at 0x7fffffff instead of 0x8000000. v2: fix the vram_start setup. v3: also fix r7xx & newer ASIC Reported-by: russiane39 on #radeon Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-19drm: fix page_flip error handlingJoonyoung Shim1-4/+6
Free event and restore event_space only when page_flip->flags has DRM_MODE_PAGE_FLIP_EVENT if page_flip() is failed. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 14:44:31 +0000