summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-10-02thunderbolt: Use spinlock in ring serializationMika Westerberg2-13/+15
This makes it possible to enqueue frames also from atomic context which is needed for example, when networking packets are sent over a Thunderbolt cable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move ring descriptor flags to thunderbolt.hMika Westerberg2-7/+18
A Thunderbolt service driver might need to check if there was an error with the descriptor when in frame mode. We also add two Rx specific error flags RING_DESC_CRC_ERROR and RING_DESC_BUFFER_OVERRUN. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Export ring handling functions to modulesMika Westerberg4-176/+211
These are used by Thunderbolt services to send and receive frames over the high-speed DMA rings. We also put the functions to tb_ namespace to make sure we do not collide with others and add missing kernel-doc comments for the exported functions. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for frame modeMika Westerberg4-30/+61
When high-speed DMA paths are used to transfer arbitrary data over a Thunderbolt link, DMA rings should be in frame mode instead of raw mode. The latter is used by the control channel (ring 0). In frame mode each data frame can hold up to 4kB payload. This patch modifies the DMA ring code to allow configuring a ring to be in frame mode by passing a new flag (RING_FLAG_FRAME) to the ring when it is allocated. In addition there might be need to enable end-to-end (E2E) workaround for the ring to prevent losing Rx frames in certain situations. We add another flag (RING_FLAG_E2E) that can be used for this purpose. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Configure interrupt throttling for all interruptsMika Westerberg2-3/+22
This will keep the interrupt delivery rate reasonable. The value used here (128 us) is a recommendation from the hardware people. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for XDomain discovery protocolMika Westerberg15-18/+2507
When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move tb_switch_phy_port_from_link() to thunderbolt.hMika Westerberg3-8/+8
A Thunderbolt service might need to find the physical port from a link the cable is connected to. For instance networking driver uses this information to generate MAC address according the Apple ThunderboltIP protocol. Move this function to thunderbolt.h and rename it to tb_phy_port_from_link() to reflect the fact that it does not take switch as parameter. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move thunderbolt domain structure to thunderbolt.hMika Westerberg2-42/+45
These are needed by Thunderbolt services so move them to thunderbolt.h to make sure they are available outside of drivers/thunderbolt. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move enum tb_cfg_pkg_type to thunderbolt.hMika Westerberg3-17/+18
These will be needed by Thunderbolt services when sending and receiving XDomain control messages. While there change TB_CFG_PKG_PREPARE_TO_SLEEP value to be decimal in order to be consistent with other members. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for XDomain propertiesMika Westerberg3-1/+760
Thunderbolt XDomain discovery protocol uses directories which contain properties and other directories to exchange information about what capabilities the remote host supports. This also includes identification information like device ID and name. This adds support for parsing and formatting these properties and establishes an API drivers can use in addition to the core Thunderbolt driver. This API is exposed in a new header: include/linux/thunderbolt.h. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Remove __packed from ICM message structuresMika Westerberg1-14/+14
These messages are all 32-bit aligned and they should be packed without the __packed attribute just fine. It also allows compiler to generate better code on some architectures. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02byteorder: Move {cpu_to_be32, be32_to_cpu}_array() from Thunderbolt to coreMika Westerberg2-14/+16
We will be using these when communicating XDomain discovery protocol over Thunderbolt link but they might be useful for other drivers as well. Make them available through byteorder/generic.h. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02Merge branch 'mlxsw-Fixlets'David S. Miller1-2/+2
Jiri Pirko says: ==================== mlxsw: Fixlets Couple of small nit fixes from Petr ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02mlxsw: spectrum_router: Drop a redundant conditionPetr Machata1-1/+1
Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02mlxsw: spectrum_router: Fix a typoPetr Machata1-1/+1
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02selftests: rtnetlink.sh: add vxlan and fou test casesFlorian Westphal1-0/+96
fou test lifted from ip-fou man page. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02Merge branch 'flow_dissector-dissect-tunnel-info'David S. Miller3-27/+103
Simon Horman says: ==================== flow_dissector: dissect tunnel info Move dissection of tunnel info from the flower classifier to the flow dissector where all other dissection occurs. This should not have any behavioural affect on other users of the flow dissector. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02flow_dissector: dissect tunnel infoSimon Horman2-25/+100
Move dissection of tunnel info from the flower classifier to the flow dissector where all other dissection occurs. This should not have any behavioural affect on other users of the flow dissector. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02net/dst: Make skb parameter of skb{metadata_dst, tunnel_info}() constSimon Horman1-2/+3
Make the skb parameter of skb_metadata_dst() and skb_tunnel_info() const as they are not modified. This is in preparation for using them in call-sites where skb is const. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01samples/bpf: fix warnings in xdp_monitor_userStephen Hemminger1-2/+2
Make local functions static to fix HOSTCC samples/bpf/xdp_monitor_user.o samples/bpf/xdp_monitor_user.c:64:7: warning: no previous prototype for ‘gettime’ [-Wmissing-prototypes] __u64 gettime(void) ^~~~~~~ samples/bpf/xdp_monitor_user.c:209:6: warning: no previous prototype for ‘print_bpf_prog_info’ [-Wmissing-prototypes] void print_bpf_prog_info(void) ^~~~~~~~~~~~~~~~~~~ Fixes: 3ffab5460264 ("samples/bpf: xdp_monitor tool based on tracepoints") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01mlxsw: spectrum: fix uninitialized value in errColin Ian King1-3/+1
In the unlikely event that mfc->mfc_un.res.ttls[i] is 255 for all values of i from 0 to MAXIVS-1, the err is not set at all and hence has a garbage value on the error return at the end of the function, so initialize it to 0. Also, the error return check on err and goto to err: inside the for loop makes it impossible for err to be zero at the end of the for loop, so we can remove the redundant err check at the end of the loop. Detected by CoverityScan CID#1457207 ("Unitialized scalar value") Fixes: c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01Merge branch 'bcm63xx_enet-small-fixes-and-cleanups'David S. Miller2-51/+28
Jonas Gorski says: ==================== bcm63xx_enet: small fixes and cleanups This patch set fixes a few theoretical issues and cleans up the code a bit. It also adds a bit more managed function usage to simplify clock and iomem usage. Based on net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01bcm63xx_enet: remove unneeded includeJonas Gorski1-1/+0
We don't use anyhing from that file, so drop it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01bcm63xx_enet: drop unneeded NULL phy_clk checkJonas Gorski1-5/+2
clk_disable and clk_unprepare are NULL-safe, so need to duplicate the NULL check of the functions. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01bcm63xx_enet: use managed functions for clock/ioremapJonas Gorski1-42/+12
Use managed functions where possible to reduce the amount of resource handling on error and remove paths. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01bcm63xx_enet: do not rely on probe orderJonas Gorski1-7/+2
Do not rely on the shared device being probed before the enet(sw) devices. This makes it easier to eventually move out the shared device as a dma controller driver (what it should be). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01bcm63xx_enet: do not write to random DMA channel on BCM6345Jonas Gorski1-1/+2
The DMA controller regs actually point to DMA channel 0, so the write to ENETDMA_CFG_REG will actually modify a random DMA channel. Since DMA controller registers do not exist on BCM6345, guard the write with the usual check for dma_has_sram. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01bcm63xx_enet: correct clock usageJonas Gorski1-8/+23
Check the return code of prepare_enable and change one last instance of enable only to prepare_enable. Also properly disable and release the clock in error paths and on remove for enetsw. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net-ipv6: remove unused IP6_ECN_clear() functionMaciej Żenczykowski1-5/+0
This function is unused, and furthermore it is buggy since it suffers from the same issue that requires IP6_ECN_set_ce() to take a pointer to the skb so that it may (in case of CHECKSUM_COMPLETE) update skb->csum Instead of fixing it, let's just outright remove it. Tested: builds, and 'git grep IP6_ECN_clear' comes up empty Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Namespaceify tcp_fastopen_blackhole_timeout knobHaishuang Yan4-28/+27
Different namespace application might require different time period in second to disable Fastopen on active TCP sockets. Tested: Simulate following similar situation that the server's data gets dropped after 3WHS. C ---- syn-data ---> S C <--- syn/ack ----- S C ---- ack --------> S S (accept & write) C? X <- data ------ S [retry and timeout] And then print netstat of TCPFastOpenBlackhole, the counter increased as expected when the firewall blackhole issue is detected and active TFO is disabled. # cat /proc/net/netstat | awk '{print $91}' TCPFastOpenBlackhole 1 Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Namespaceify tcp_fastopen_key knobHaishuang Yan7-35/+70
Different namespace application might require different tcp_fastopen_key independently of the host. David Miller pointed out there is a leak without releasing the context of tcp_fastopen_key during netns teardown. So add the release action in exit_batch path. Tested: 1. Container namespace: # cat /proc/sys/net/ipv4/tcp_fastopen_key: 2817fff2-f803cf97-eadfd1f3-78c0992b cookie key in tcp syn packets: Fast Open Cookie Kind: TCP Fast Open Cookie (34) Length: 10 Fast Open Cookie: 1e5dd82a8c492ca9 2. Host: # cat /proc/sys/net/ipv4/tcp_fastopen_key: 107d7c5f-68eb2ac7-02fb06e6-ed341702 cookie key in tcp syn packets: Fast Open Cookie Kind: TCP Fast Open Cookie (34) Length: 10 Fast Open Cookie: e213c02bf0afbc8a Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Remove the 'publish' logic in tcp_fastopen_init_key_onceHaishuang Yan5-10/+5
The 'publish' logic is not necessary after commit dfea2aa65424 ("tcp: Do not call tcp_fastopen_reset_cipher from interrupt context"), because in tcp_fastopen_cookie_gen，it wouldn't call tcp_fastopen_init_key_once. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ipv4: Namespaceify tcp_fastopen knobHaishuang Yan7-19/+21
Different namespace application might require enable TCP Fast Open feature independently of the host. This patch series continues making more of the TCP Fast Open related sysctl knobs be per net-namespace. Reported-by: Luca BRUNO <lucab@debian.org> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01Merge branch 'dsa_ptr-port'David S. Miller16-155/+97
Vivien Didelot says: ==================== net: dsa: change dsa_ptr for a dsa_port With DSA, a master net_device is physically wired to a dedicated CPU switch port. For interaction with the DSA layer, the struct net_device contains a dsa_ptr, which currently points to a dsa_switch_tree object. This is only valid for a switch fabric with a single CPU port. In order to support switch fabrics with multiple CPU ports, we first need to change the type of dsa_ptr to what it really is: a dsa_port object. This is what this patchset does. The first patches adds a dsa_master_get_slave helper and cleans up portions of DSA core to make the next patches more readable. These next patches prepare the xmit and receive hot paths and finally change dsa_ptr. Changes in v2: - introduce dsa_master_get_slave helper to simplify patch 6 - keep hot path data at beginning of dsa_port for cacheline 1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: remove tag ops from the switch treeVivien Didelot3-15/+0
Now that the dsa_ptr is a dsa_port instance, there is no need to keep the tag operations in the dsa_switch_tree structure. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: change dsa_ptr for a dsa_portVivien Didelot6-18/+14
With DSA, a master net device (CPU facing interface) has a dsa_ptr pointer to which hangs a dsa_switch_tree. This is not correct because a master interface is wired to a dedicated switch port, and because we can theoretically have several master interfaces pointing to several CPU ports of the same switch fabric. Change the master interface's dsa_ptr for the CPU dsa_port pointer. This is a step towards supporting multiple CPU ports. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: prepare master receive hot pathVivien Didelot3-0/+13
In preparation to make DSA master devices point to their corresponding CPU port instead of the whole tree, add copies of dst and rcv in the dsa_port structure so that we keep fast access in the receive hot path. Also keep the copies at the beginning of the dsa_port structure in order to ensure they are available in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: add tagging ops to portVivien Didelot5-3/+7
The DSA tagging protocol operations are specific to each CPU port, thus the dsa_device_ops pointer belongs to the dsa_port structure. >From now on assign a slave's xmit copy from its CPU port tagging operations. This will ease the future support for multiple CPU ports. Also keep the tag_ops at the beginning of the dsa_port structure so that we ensure copies for hot path are in cacheline 1. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: use temporary dsa_device_ops variableVivien Didelot2-6/+10
When resolving the DSA tagging protocol used by a CPU switch, use a temporary "tag_ops" variable to store the dsa_device_ops instead of using directly dst->tag_ops. This will make the future patches moving this pointer around easier to read. There is no functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: use cpu_dp in master codeVivien Didelot1-20/+22
Make it clear that the master device is linked to a CPU port by using "cpu_dp" for the dsa_port variable in master.c instead of "port", then use a "port" variable to describe the port index, as usually seen in other places of DSA core. This will make the future patch touching dsa_ptr more readable. There is no functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: dsa: add master helper to look up slavesVivien Didelot9-101/+39
The DSA tagging code does not need to know about the DSA architecture, it only needs to return the slave device corresponding to the source port index (and eventually the source device index for cascade-capable switches) parsed from the frame received on the master device. For this purpose, provide an inline dsa_master_get_slave helper which validates the device and port indexes and look up the slave device. This makes the tagging rcv functions more concise and robust, and also makes dsa_get_cpu_port obsolete. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: hns3: fix null pointer dereference before null checkColin Ian King1-1/+3
pointer ndev is being dereferenced with the call to netif_running before it is being null checked. Re-order the code to only dereference ndev after it has been null checked. Detected by CoverityScan, CID#1457206 ("Dereference before null check") Fixes: 9df8f79a4d29 ("net: hns3: Add DCB support when interacting with network stack") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01hv_netvsc: report stop_queue and wake_queueSimon Xiao3-2/+14
Report the numbers of events for stop_queue and wake_queue in ethtool stats. Example: ethtool -S eth0 NIC statistics: ... stop_queue: 7 wake_queue: 7 ... Signed-off-by: Simon Xiao <sixiao@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01bpf: Fix compiler warning on info.map_ids for 32bit platformMartin KaFai Lau1-1/+1
This patch uses u64_to_user_ptr() to cast info.map_ids to a userspace ptr. It also tags the user_map_ids with '__user' for sparse check. Fixes: cb4d2b3f03d8 ("bpf: Add name, load_time, uid and map_ids to bpf_prog_info") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net_sched: remove redundant assignment to retColin Ian King1-1/+0
The assignment of -EINVAL to variable ret is redundant as it is being overwritten on the following error exit paths or to the return value from the following call to basic_set_parms. Fix this up by removing it. Cleans up clang warning message: net/sched/cls_basic.c:185:2: warning: Value stored to 'err' is never read Fixes: 1d8134fea2eb ("net_sched: use idr to allocate basic filter handles") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01net: ipmr: make function ipmr_notifier_init staticColin Ian King1-1/+1
The function ipmr_notifier_init is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'ipmr_notifier_init' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01ibmvnic: Set state UPMick Tarsel1-0/+2
State is initially reported as UNKNOWN. Before register call netif_carrier_off(). Once the device is opened, call netif_carrier_on() in order to set the state to UP. Signed-off-by: Mick Tarsel <mjtarsel@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01Revert "net: dsa: bcm_sf2: Defer port enabling to calling port_enable"Florian Fainelli1-3/+6
This reverts commit e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") because this now makes an unbind followed by a bind to fail connecting to the ingrated PHY. What this patch missed is that we need the PHY to be enabled with bcm_sf2_gphy_enable_set() before probing it on the MDIO bus. This is correctly done in the ops->setup() function, but by the time ops->port_enable() runs, this is too late. Upon unbind we would power down the PHY, and so when we would bind again, the PHY would be left powered off. Fixes: e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01Merge branch '40GbE' of ↵David S. Miller12-155/+294
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-09-29 This series contains updates to i40e and i40evf only. Jake provides several of the changes starting with the renaming of a variable to clarify what the value is actually calculating. Found we were misusing the __I40E_RECOVERY_PENDING bit to determine when we should actually request a new IRQ in i40e_setup_misc_vector(), which lead to a design mistake, so to resolve the issue, use a separate state bit for miscellaneous IRQ setup and fix up the design while we are at it. Cleaned up the old legacy PM support in the driver since we support the newer generic PM callbacks. Fixed a failure to hibernate issue, where on some platforms with a large number of CPUs, we would allocate many IRQ vectors which we would try to migrate to CPU0 when hibernating. Sudheer cleans up a check for unqualified module inside i40e_up_complete() because the link state information is in flux at time, so log messages are getting logged with incorrect link state information. Also provided additional log message cleanups and simplify member variable access in the printing of the link messages. Mariusz relaxes the firmware check since Fortville and Fort Park NICs can and do have different firmware versions, so only warn for older Fortville firmware. Fixed an errata with a flow director statistic that was not wrapping as expected, simply reset after reading. Mitch prevents consternation by lowering the log level to debug on a message seen regularly on VF reset or unload, which is meaningless under normal circumstances. Refactor the firmware version checking since Fortville and Fort Park devices can have different firmware versions. Alan fixes a ring to vector mapping, where the past implementation attempted to map each Tx and Rx ring to its own vector, however we use combined queues so we should be mapping the Tx/Rx rings together on one vector. Adds the ability for the VF to request a different number of queues allocated to it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-30mkiss: remove redundant check on len being zeroColin Ian King1-1/+2
The check on len is redundant as it is always greater than 1, so just remove it and make the printk less complex. Detected by CoverityScan, CID#1226729 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 03:52:23 +0000