summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-05-24checkkconfigsymbols.py: add option -i to ignore filesValentin Rothberg1-6/+26
Sometimes a user might be interested to filter certain reports (e.g., the many defconfigs). Now, this can be achieved by specifying a Python regex with -i / --ignore. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: add support for loading/unloading SCIF driverSudeep Dutt1-13/+11
modprobe SCIF driver upon start and remove it upon unload Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: MIC card driver specific changes to enable SCIFSudeep Dutt5-6/+201
MIC card driver specific changes to enable SCIF. This patch implements the SCIF hardware bus operations and registers a SCIF device on the SCIF hardware bus. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: MIC host driver specific changes to enable SCIFSudeep Dutt10-24/+292
MIC host driver specific changes to enable SCIF. This patch implements the SCIF hardware bus operations and registers a SCIF device on the SCIF hardware bus. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF messaging and node enumeration APIsSudeep Dutt6-1/+583
SCIF messaging APIs which allow sending messages between the SCIF endpoints via a byte stream based ring buffer which has been optimized to avoid reads across PCIe. The SCIF messaging APIs are typically used for short < 1024 byte messages for best performance while the RDMA APIs which will be submitted in a future patch series is recommended for larger transfers. The node enumeration API enables a user to query for the number of nodes online in the SCIF network and their node ids. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF connections APIs i.e. accept and connectNikhil Rao7-1/+852
SCIF connection APIs which establish a SCIF connection between a pair of SCIF endpoints. A SCIF connection consists of a dedicated queue-pair between the endpoints. Client messages are sent over the queue-pair whereas the signaling associated with the message is multiplexed over the node queue-pair. Similarly other control messages such as exposing registered memory are also sent over the node queue-pair. The SCIF endpoints must be in connected state to exchange messages, register memory, map remote memory and trigger DMA transfers. SCIF connections can be set up asynchronously or synchronously. Thanks to Johnnie S Peters for authoring parts of this patch during early bring up of the SCIF driver. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF open close bind and listen APIsSudeep Dutt10-1/+933
SCIF character device file operations and kernel APIs for opening and closing a user and kernel mode SCIF endpoint. This patch also enables binding to a SCIF port and listening for incoming SCIF connections. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF node queue pair setup managementSudeep Dutt3-0/+1621
SCIF node queue pair setup creates the SCIF driver kernel mode private node queue pairs between all the nodes to enable internal control message communication once SCIF gets probed by the SCIF hardware bus. Peer to peer communication between MIC Coprocessor nodes is supported. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF module initializationSudeep Dutt4-0/+841
SCIF module initialization, DMA mapping, ioremap wrapper APIs and debugfs hooks. SCIF gets probed by the SCIF hardware bus if SCIF devices were registered by base drivers. A MISC device is registered to provide the SCIF character device interface. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: Common MIC header file changes in preparation for SCIFSudeep Dutt2-0/+15
Update mic_bootparam and define the maximum number of DMA channels Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF Peer BusSudeep Dutt2-0/+189
The SCIF peer bus is used to register and unregister SCIF peer devices internally by the SCIF driver to signify the addition and removal of peer nodes respectively from the SCIF network. This simplifies remote node handling within SCIF and will also be used to support device probe/remove for SCIF client drivers (e.g. netdev over SCIF) Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF Hardware BusSudeep Dutt5-1/+358
The SCIF hardware bus abstracts the low level hardware driver details like interrupts and mapping remote memory so that the same SCIF driver can work without any changes with the MIC host or card driver as long as the hardware bus operations are implemented. The SCIF hardware device is registered by the host and card drivers on the SCIF hardware bus resulting in probing the SCIF driver. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF ring buffer infrastructureSudeep Dutt2-0/+348
SCIF ring buffer is a single producer, single consumer byte stream ring buffer optimized for avoiding reads across the PCIe bus while adding the required barriers and hardware workarounds for the MIC Coprocessor. The ring buffer is used to implement a receive queue for SCIF driver messaging between two nodes and for byte stream messaging between SCIF endpoints. The existing in-kernel ring buffer was not reused since it has not been designed for our use across the PCIe bus where each node runs an independent OS. Each SCIF node has a receive queue for every other SCIF node, and each connected endpoint has a receive queue for messages from its peer. This pair of receive queues is referred to as a SCIF queue pair. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF header file and IOCTL interfaceSudeep Dutt5-12/+1238
This patch introduces the SCIF documentation in the header file and describes the IOCTL interface for user mode. mic_overview.txt is updated with documentation on SCIF and a new document describing SCIF in more details is available in scif_overview.txt. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: remove drivers for CARMA hardwareIra Snyder6-2708/+0
The CARMA project has ended, and the hardware has all been moved into storage. It is unlikely to ever be used again. Remove the drivers so that there is no more maintenance burden from ongoing upstream kernel changes. Signed-off-by: Ira W. Snyder <ira.snyder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24drivers: char: misc.c: remove trailing whitespaceTal Shorer1-5/+5
Remove trailing whitespace from several lines in drivers/char/misc.c This was done using scripts/cleanfile Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24w1: Add support for DS28EA00 sequence to w1-thermMatt Campbell3-2/+117
This patch provides support for the DS28EA00 digital thermometer. The DS28EA00 provides an additional two pins for implementing a sequence detection algorithm. This feature allows you to determine the physical location of the chip in the 1-wire bus without needing pre-existing knowledge of the bus ordering. Support is provided through the sysfs w1_seq file. The file will contain a single line with an integer value representing the device index in the bus starting at 0. Signed-off-by: Matt Campbell <mattrcampbell@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24w1_therm reference count family dataDavid Fries1-15/+47
A temperature conversion can take 750 ms and when possible the w1_therm slave driver drops the bus_mutex to allow other bus operations, but that includes operations such as a periodic slave search, which can remove this slave when it is no longer detected. If that happens the sl->family_data will be freed and set to NULL causing w1_slave_show to crash when it wakes up. Signed-off-by: David Fries <David@Fries.net> Reported-By: Thorsten Bschorr <thorsten@bschorr.de> Tested-by: Thorsten Bschorr <thorsten@bschorr.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24w1: introduce an ability to specify microseconds bus scanning intervalsDmitry Khromov3-12/+46
Some of 1-Wire devices commonly associated with physical access control systems are attached/generate presence for as short as 100 ms - hence the tens-to-hundreds milliseconds scan intervals are required. Signed-off-by: Dmitry Khromov <dk@icelogic.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24lz4: fix system halt at boot kernel on x86_64Krzysztof Kolasa1-1/+11
Sometimes, on x86_64, decompression fails with the following error: Decompressing Linux... Decoding failed -- System halted This condition is not needed for a 64bit kernel(from commit d5e7caf): if( ... || (op + COPYLENGTH) > oend) goto _output_error macro LZ4_SECURE_COPY() tests op and does not copy any data when op exceeds the value. added by analogy to lz4_uncompress_unknownoutputsize(...) Signed-off-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Alexander Kuleshov <kuleshovmail@gmail.com> Tested-by: Caleb Jorden <cjorden@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24spmi: Add dependency on HAS_IOMEMRichard Weinberger1-0/+1
Not all architectures have io memory. Fixes: drivers/built-in.o: In function `spmi_pmic_arb_probe': spmi-pmic-arb.c:(.text+0x1ed399): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24uio: don't free irq that was not requestedStephen Hemminger1-1/+2
UIO base driver should only free_irq that it has requested. UIO supports drivers without interrupts (irq == 0) or custom handlers. This fixes warnings like: WARNING: CPU: 1 PID: 5478 at kernel/irq/manage.c:1244 __free_irq+0xa9/0x1e0() Trying to free already-free IRQ 0 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: export hbm features to debugfs under devstateTomas Winkler1-0/+7
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: export mei client device struct to external useTomas Winkler2-37/+36
Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24NFC: mei_phy: adjust mei nfc header according the specTomas Winkler1-27/+31
1. mei_nfc_hci_hdr and mei_nfc_hdr are just the same thing so drop one 2. use mei_nfc_hdr structure as the member of the command and the reply instead of replicating all header fields. 3. dump the header for easier debugging Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: kill mei_cl_opsTomas Winkler1-24/+0
since we move all nfc hanling to the mei_phy module we can kill mei_cl_ops Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24NFC: mei_phy: move all nfc logic from mei driver to nfcTomas Winkler5-242/+304
move nfc logic to mei_phy module, we prefer as much as possible not to deal with a particualr client protocol in the mei generic infrasutcutre Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: add name and uuid into device attributesTomas Winkler2-0/+47
Export name and uuid via sysfs and uevent Cc: linux-api@vger.kernel.org Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: report also uuid in module aliasTomas Winkler9-13/+72
In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: add also write waiting list to runtime pm blockersTomas Winkler1-3/+5
The io callback is clear from write_waitling_list after we receive interrupt from the hw to ack the write completion. We need to wait for this interrupt deliver before we try to enter low power state Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: request autosuspend at the end of writeAlexander Usyskin1-1/+7
On longer non-blocking write might not complete at the end of autosuspend expiration, therefore we request autosuspend again on the write completion. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: consume flow control on the first chunk of writingAlexander Usyskin1-14/+14
Consume the write flow control on the first chunk of the write instead of on the buffer completion. We can safely assume that the consequent chunks have the flow control granted. This addresses two issues: 1. Blocks other callbacks from the same client riding on the client's flow control and prevents interleaving of messages as FW cannot distinguish between two messages from the same client. 2. Fixes single buffer flow control arbitration in a clean way, without connection/disconnection book keeping Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: debug prints with client info in readAlexander Usyskin1-5/+4
Add client info to debug prints in the read function to ease on debugging efforts. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: txe: fix incorrect indentationTomas Winkler1-1/+1
Remove spurious blank Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: drop iamthif_mtu from device structureAlexander Usyskin2-10/+1
We can receive mtu with one call now, no need to store it. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: connection to fixed address clients from user-spaceAlexander Usyskin3-1/+17
This should be used for debug only. The feaure is gated by "allow_fixed_address" control exposed in debugfs. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: support for fixed address clientsAlexander Usyskin4-19/+68
Fixed address is simplified FW client that doesn't require connection and doesn't support flow control. So it can be only one host client per fixed FW client. Fixed client access is available only for drivers on mei bus, connection from user-space is blocked. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: fix flow control for single buffer clientsAlexander Usyskin2-6/+27
For ME clients that use single receiving buffer the driver tracks credentials on mei_me_clients structure for all connections. The driver needs to book keep the shared resource correctly and track the connections, particularly the credit has to be cleaned when there is no active connection to a particular me client. This solves issue when subsequent connection will not get an ill impression that it can write. We add active connection counter the particular ME client and when the counter reach zero, we clear the credits. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: add a reference from the host client to the me clientAlexander Usyskin11-179/+225
Keep a pointer to associated me client in the host client object to eliminate me client searches. Check if the me client is active in the firmware by checking if its is linked on the me clients list Add accessors for the me client properties from host client. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: revamp client connectionTomas Winkler4-66/+83
Simplify connect state machine by changing the logic around Connection request in progress - only check if we have a callback in relevant queue. Extract common code into mei_cl_send_connect() function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: revamp client disconnection flowTomas Winkler7-96/+134
Split disconnected state into two parts first reception disconnect response from the firmware and second actually setting of disconnected state. Book keeping data are needed for processing and after firmware disconnected the client and are cleaned when setting the disconnected state in mei_cl_set_disconneted() function. Add mei_cl_send_disconnect to reduce code duplication. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: txe: reduce suspend/resume timeTomas Winkler1-10/+10
HW has to be in known state before the initialisation sequence is started. The polling step for settling aliveness was set to 200ms while in practise this can be done in up to 30msecs. Cc: <stable@vger.kernel.org> #3.18+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Barak Yoresh <barak.yoresh@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: replicator: Add Qualcomm CoreSight Replicator driverPratik Patel4-0/+224
This driver manages Qualcomm CoreSight Replicator device, which resides on the AMBA bus. Replicator has been made programmable to allow software to turn of the replicator branch to sink that is not being used. This avoids trace traffic to the unused/non-current sink from causing back pressure that results in overflows at the source. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: fix typo in of_coresight.cPankaj Dubey1-1/+1
fixes obvious typo in of_coresight.c %s/non-configuable/non-configurable Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: document the bindings for the ATCLKLinus Walleij1-5/+8
Put in a blurb in the device tree bindings indicating that coresight blocks may have an optional ATCLK. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: replicator: retrieve and handle atclkLinus Walleij1-4/+67
As can be seen from the datasheet of the CoreSight Components, DDI0314 table A-4 the funnel has a clock signal apart from the AHB interconnect ("amba_pclk", that we're already handling) called ATCLK, ARM Trace Clock, that SoC implementers may provide from an entirely different clock source. So to model this correctly create an optional path for handling ATCLK alongside the PCLK so we don't break old platforms that only define PCLK ("amba_pclk") but still makes it possible for SoCs that have both clock signals (such as the DB8500) to fetch and prepare/enable/disable/ unprepare both clocks. The ATCLK is enabled and disabled using the runtime PM callbacks. As the replicator is a platform device, the code is a bit different from the other CoreSight components and the bus core does not activate runtime PM by default, so we need a few extra calls. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: funnel: retrieve and handle atclkLinus Walleij1-0/+37
As can be seen from the datasheet of the CoreSight Components, DDI0314 table A-6 the funnel has a clock signal apart from the AHB interconnect ("amba_pclk", that we're already handling) called ATCLK, ARM Trace Clock, that SoC implementers may provide from an entirely different clock source. So to model this correctly create an optional path for handling ATCLK alongside the PCLK so we don't break old platforms that only define PCLK ("amba_pclk") but still makes it possible for SoCs that have both clock signals (such as the DB8500) to fetch and prepare/enable/disable/ unprepare both clocks. The ATCLK is enabled and disabled using the runtime PM callbacks. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: etb: retrieve and handle atclkLinus Walleij1-0/+37
As can be seen from the datasheet of the CoreSight Components, DDI0314 table A-8 the ETB has a clock signal apart from the AHB interconnect ("amba_pclk", that we're already handling) called ATCLK, ARM Trace Clock, that SoC implementers may provide from an entirely different clock source. So to model this correctly create an optional path for handling ATCLK alongside the PCLK so we don't break old platforms that only define PCLK ("amba_pclk") but still makes it possible for SoCs that have both clock signals (such as the DB8500) to fetch and prepare/enable/disable/ unprepare both clocks. The ATCLK is enabled and disabled using the runtime PM callbacks. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: tpiu: retrieve and handle atclkLinus Walleij1-0/+37
As can be seen from the datasheet of the CoreSight Components, DDI0314H page A-19 the TPIU has a clock signal apart from the AHB interconnect ("amba_pclk", that we're already handling) called ATCLK, ARM Trace Clock, that SoC implementers may provide from an entirely different clock source. So to model this correctly create an optional path for handling ATCLK alongside the PCLK so we don't break old platforms that only define PCLK ("amba_pclk") but still makes it possible for SoCs that have both clock signals (such as the DB8500) to fetch and prepare/enable/disable/ unprepare both clocks in conjunction. The ATCLK is enabled and disabled using the runtime PM callbacks. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: etm: retrieve and handle atclkLinus Walleij2-1/+37
As can be seen from the datasheet of the CoreSight Components, DDI0401C A.1.1 the ETM has a clock signal apart from the AHB interconnect ("amba_pclk", that we're already handling) called ATCLK, ARM Trace Clock, that SoC implementers may provide from an entirely different clock source. So to model this correctly create an optional path for handling ATCLK alongside the PCLK so we don't break old platforms that only define PCLK ("amba_pclk") but still makes it possible for SoCs that have both clock signals (such as the DB8500) to fetch and prepare/enable/disable/ unprepare both clocks. The ATCLK is enabled and disabled using the runtime PM callbacks. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 22:10:23 +0000