summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-05-19ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100Marek Szyprowski5-8/+9
Move gpio-lib support from plat-s5pc1xx to mach-s5pc100. Only basic gpio functionality is now supported. Gpio interrupts are disabled temporarly and will be added later. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: Use common functions for gpiolib implementationMarek Szyprowski2-87/+10
GPIOlib helpers from plat-samsung already have functions for accessing 4bit gpio banks. This patch removes the duplicated functions from plat-s5pc1xx/gpiolib.c. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19drivers: serial: S5PC100 serial driver cleanupMarek Szyprowski2-13/+4
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as S3C6400/S3C6410/S5P6440. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p moveThomas Abraham5-1/+1454
This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p movement. The patches that perform the movement of the code from plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the build for the mach-s5pc100/clock.c code. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: SAMSUNG: Copy common I2C0 device helpers to machine directoriesMarek Szyprowski7-2/+54
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: SAMSUNG: move driver strength gpio configuration helper to common dirMarek Szyprowski9-103/+86
Driver strength parameter can be changed not only on S5PC100 but also on S5PV210/S5PC110 platforms, so move the helper functions to the common plat-samsung directory. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: Merge for-2635/samsung-rtcBen Dooks5-15/+23
Merge branch 'for-2635/samsung-rtc' into for-linus/samsung2 Conflicts: arch/arm/mach-s3c64xx/include/mach/map.h arch/arm/plat-samsung/Kconfig arch/arm/plat-samsung/Makefile
2010-05-19ARM: Merge for-2635/samsung-tsBen Dooks7-5/+14
Merge branch 'for-2635/samsung-ts' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/s5p-audioBen Dooks14-0/+710
Merge branch 'for-2635/s5p-audio' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/s5p-dmaBen Dooks20-3/+1813
Merge branch 'for-2635/s5p-dma' into for-linus/samsung2 Conflicts: arch/arm/mach-s5pv210/Makefile
2010-05-19ARM: Merge for-2635/fb-updates1Ben Dooks38-527/+1631
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/s5pv210-clockBen Dooks3-122/+720
Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/s5p6440-clockBen Dooks1-101/+249
Merge branch 'for-2635/s5p6440-clock' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/s3c6410-clockBen Dooks3-0/+38
Merge branch 'for-2635/s3c6410-clock' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/gpio2Ben Dooks40-342/+531
Merge branch 'for-2635/gpio2' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/rx1950Ben Dooks7-7/+621
Merge branch 'for-2635/rx1950' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/acer-n35Ben Dooks2-10/+77
Merge branch 'for-2635/acer-n35' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/samsung-clockBen Dooks2-0/+6
Merge branch 'for-2635/samsung-clock' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/samsung-hwmonBen Dooks7-9/+60
Merge branch 'for-2635/samsung-hwmon' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/samsung-dmaBen Dooks3-4/+4
Merge branch 'for-2635/samsung-dma' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/s5p-generalBen Dooks8-8/+284
Merge branch 'for-2635/s5p-general' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/s3c24xx-generalBen Dooks9-16/+22
Merge branch 'for-2635/s3c24xx-general' into for-linus/samsung2
2010-05-19ARM: S5PV210: Add GPIOlib supportPannaga Bhushan3-4/+277
This patch adds GPIOlib support for S5PV210. Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: SAMSUNGy: fix broken timer irq baseMarek Szyprowski1-1/+1
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range (32-64). This was caused probably by a typo while the common interrupts definition was refactored. This patch moves timer interrupt range to safe area of 11-15 (just before uart range). This fixes the commit 87aef30eb3c5dac0491c83fe3b90bc61f1df24ec ("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.") which meant to move these into the old (and previously reserved) ISA space. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [ben-linux@fluff.org: update description] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SMDK6440: Add audio devices on boardJassi Brar1-0/+1
Add audio platform devices on the smdk by default. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S5P6440: Add audio platform devicesJassi Brar4-0/+139
Define platform devices for all audio devices found on S5P6440 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SMDK6442: Add audio devices on boardJassi Brar1-0/+1
Add audio platform devices on the smdk by default. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S5P6442: Add audio platform devicesJassi Brar4-0/+213
Define platform devices for all audio devices found on S5P6442 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SMDKC110: Add audio devices on boardJassi Brar1-0/+2
Add audio platform devices on the smdk by default. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SMDKV210: Add audio devices on boardJassi Brar1-0/+2
Add audio platform devices on the smdk by default. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S5PV210: Add audio platform devicesJassi Brar4-0/+352
Define platform devices for all audio devices found on S5PV210 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SAMSUNG: Fix additional increment when running through gpiosBen Dooks1-2/+2
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios field and the bank-bank offset inside the loop, and also in the for() loop with a ++. Remove the ++, as the number is already at the next GPIO, thus ensuring that we don't skip a gpio bank by accident. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Add note on GPIO bank sizesBen Dooks1-0/+19
Add a table for the GPIO bank sizes for each SoC Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Remove macros mapping GPIO number to baseBen Dooks3-22/+3
As part of the cleanup, remove the old macros mapping GPIO numbers to the base of the register now we have gpiolib to manage the GPIO mappings for us. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Update missed gpio calls to use gpiolibBen Dooks2-8/+12
Update a couple of S3C24XX and S3C2412 files that are still using the GPIO number to register mapping calls to get the s3c_gpio_chip and use the base field from that. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Start cleanup of GPIO numberingBen Dooks2-9/+4
Start cleaning up the numbering of GPIO banks by removing the old bank start definitions currently being used by some of the header files. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C244X: fix gpiolib port J supportVasily Khoruzhick2-1/+9
Increase GPIOs number for S3C244X, and make S3C_GPIO_END point to BANKJ end, otherwise gpiolib refuses to register BANKJ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [ben-linux@fluff.org: Move pm fix to new patch] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SMDK2416: Add support for framebuffer device and ensure correct setupBen Dooks3-3/+62
Add support for the LCD display on the SMDJK2416, and correctly name the framebuffer device. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SAMSUNG: Set S3C_FB_MAX_WIN in <plat/fb.h>Ben Dooks2-1/+7
Move the S3C_FB_MAX_WIN to the platform data to avoid having to include the registers with the platform data. Set S3C_FB_MAX_WIN to 5, which is the maximum that any of the current hardware can do and the cost of having it set to this for all is minimal (at least for the platform data case), then always leave this as the maximum for the systems supported. Also remove the inclusion of <mach/regs-fb.h> from the device definition in arch/arm/plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C2443: Fix definition of LCD clock bitBen Dooks1-2/+1
Fix the definition of the LCD clock bit, it is the TFT display controller on bit 9, not the older STN on bit 10. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C2443: Add initial defines for framebuffer supportBen Dooks2-0/+6
Add the necessary defines to get the s3c-fb device to compile for s3c2443. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C64XX: Add USB external clock definitionMaurus Cuelenaere2-0/+8
This adds the xusbxti clock to S3C64XX platform. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18S5PV210: DMA: Add platform devices for PL330 DMACsJassi Brar5-1/+200
Samsung's Soc S5PV210 has three PL330 DMACs. First is dedicated for Memory->Memory data transfer while the other two meant for data transfer with peripherals. Define and add latter two PL330 DMACs as platform devices on the S5PV210 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18S5P6442: DMA: Add platform devices for PL330 DMACsJassi Brar5-1/+136
Samsung's Soc S5P6442 has two PL330 DMACs. First is dedicated for Memory->Memory data transfer while the second is meant for data transfer with peripherals. Define and add the peripheral PL330 DMAC as platform device on the S5P6442 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18S5P6440: DMA: Add platform devices for PL330 DMACsJassi Brar5-1/+135
Samsung's Soc S5P6440 has one PL330 DMAC. Define and add the PL330 DMAC as platform device on the S5P6440 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18S3C: DMA: Add api driver for PL330Jassi Brar5-0/+1342
Latest Samsung SoCs have one or more PL330 as their DMACs. This patch implements the S3C DMA API for PL330 core driver. The design has been kept as generic as possible while keeping effort to add support for new SoCs to the minimum possible level. Some of the salient features of this driver are:- o Automatic scheduling of client requests onto DMAC if more than one DMAC can reach the peripheral. Factors, such as current load and number of exclusive but inactive peripherals that are supported by the DMAC, are used to decide suitability of a DMAC for a particular client. o CIRCULAR buffer option is supported. o The driver scales transparently with the number of DMACs and total peripherals in the platform, since all peripherals are added to the peripheral pool and DMACs to the controller pool. For most conservative use of memory, smallest driver size and best performance, we don't employ legacy data structures of the S3C DMA API. That should not have any affect since those data structures are completely invisible to the DMA clients. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SAMSUNG: Move RTC device definitions in plat-samsungAtul Dahiya5-15/+21
This patch moves RTC device definitions from mach-s3c64xx to plat-samsung, to enable the other SoCs to use same device definition. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SAMSUNG: Moving ADC device definition to plat-samsung.Naveen Krishna7-5/+14
This patch moves ADC device definition to plat-samsung. Because that is generic to the S3C64XX and S5P Series SoCs. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: h1940: framebuffer configuration fixMike Solovyev1-2/+2
Seems like a typo, wrong setup leads to broken image on ipaq screen. Signed-off-by: Mike Solovyev <ms@sk.2-ch.org> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17S3C: DMA: Change argument of s3c2410_dma_devconfigJassi Brar3-4/+4
All other functions have the channel argument of type 'unsigned int' the s3c2410_dma_devconfig also accept the same value as argument but treat it as type 'int'. Remove this anomaly by make it 'unsigned int'. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 06:18:57 +0000