summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-01-27clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for the GPUMaxime Ripard1-1/+1
In order to achieve all the rates asked by the GPU, we might need to change the parent frequency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Chen-Yu Tsai <wens@csie.org>
2017-01-27clk: sunxi-ng: Call divider_round_rate if we only have a single parentMaxime Ripard1-0/+12
The divider_get_val function that is used in our determine_rate callback doesn't try to change the parent rate at all, while clk_divider_bestdiv, used in divider_round_rate, does. If we have a single parent, call divider_round_rate. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Chen-Yu Tsai <wens@csie.org>
2017-01-23ARM: gr8: Convert to CCUMaxime Ripard1-464/+56
Now that we have a driver for the GR8, we can convert our DT to it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23ARM: sun5i: Convert to CCUMaxime Ripard4-513/+75
Now that we have drivers for all of them, convert all the SoCs that share the sun5i DTSI to the new CCU driver. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: Add sun5i CCU driverMaxime Ripard6-0/+1235
The Allwinner A10s, A13, R8 and NextThing GR8 are all based on the same silicon, and all share the same clocks. However, they're not packaged in the same way, and therefore not all the controllers are actually available on all these SoCs. Introduce a clock controller driver for all these SoCs with different compatibles to take that into account. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: Implement global pre-dividerMaxime Ripard2-1/+9
Some clocks have a global pre-divider that applies to all their parents. Since it might also apply to clocks that have a single parent, this is merged in the ccu_common structure, unlike the other pre-divider settings that are tied to a specific index, and thus a specific parent. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: Implement multiplier maximumMaxime Ripard6-20/+32
Some multipliers have a maximum rate that is lower than what the register width allows to. Add a field in the multiplier structure to allow CCU driver to set that maximum. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: mult: Fix minimum in round rateMaxime Ripard1-1/+1
The previous code was always taking 1 as the minimum in it's round_rate function, ignoring entirely what was set as minimum in the clock definition. Make sure that's not the case anymore. Fixes: 2beaa601c849 ("clk: sunxi-ng: Implement minimum for multipliers") Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: Implement factors offsetsMaxime Ripard8-29/+79
The factors we've seen so far all had an offset of one. However, on the earlier Allwinner SoCs, some factors could have no offset at all, meaning that the value computed to reach the rate we want to use was the one we had to program in the registers. Implement an additional field for the factors that can have such an offset (linears, not based on a power of two) to specify that offset. This offset is not linked to the extremums that can be specified in those structures too. The minimum and maximum are representing the range of values we can use to try to compute the best rate. The offset comes later on when we want to set the best value in the registers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23clk: sunxi-ng: multiplier: Add fractional supportMaxime Ripard2-0/+10
Some clocks on the earlier SoCs such as the video PLLs are multipliers with fractional settings. Support those cases. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2017-01-20clk: sunxi-ng: add support for V3s CCUIcenowy Zheng6-0/+851
V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks about CSI, are different, which makes it to need a new CCU driver. Add such a new driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20dt-bindings: add device binding for the CCU of Allwinner V3sIcenowy Zheng1-0/+1
Allwinner V3s is now driven by sunxi-ng CCU driver. Add devicetree binding for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-17clk: sunxi-ng: a33: Add CLK_SET_RATE_PARENT to ac-digMylène Josserand1-1/+1
The audio DAI needs to set the clock rates of the ac-dig clock. To make it possible, the parent PLL audio clock rates should also be changed. This is possible via "CLK_SET_RATE_PARENT" flag. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-02clk: sunxi-ng: A31: Fix spdif clock registerMarcus Cooper1-2/+2
As the SPDIF was rarely documented on the earlier Allwinner SoCs it was assumed that it had a similar clock register to the one described in the H3 User Manual. However this is not the case and it looks to shares the same setup as the I2S clock registers. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-02clk: sunxi-ng: set the parent rate when adjustin CPUX clock on A33Icenowy Zheng1-1/+1
The CPUX clock on A33, which is for the Cortex-A7 cores, is designed to be changeable by changing the rate of PLL_CPUX. Add CLK_SET_RATE_PARENT flag to this clock. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-02clk: sunxi-ng: fix PLL_CPUX adjusting on A33Icenowy Zheng1-0/+10
When adjusting PLL_CPUX on A33, the PLL is temporarily driven too high, and the system hangs. Add a notifier to avoid this situation by temporarily switching to a known stable 24 MHz oscillator. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-02clk: sunxi-ng: fix PLL_CPUX adjusting on H3Ondrej Jirman1-0/+10
When adjusting PLL_CPUX on H3, the PLL is temporarily driven too high, and the system becomes unstable (oopses or hangs). Add a notifier to avoid this situation by temporarily switching to a known stable 24 MHz oscillator. Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Lutz Sammer <johns98@gmx.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-25Linux 4.10-rc1v4.10-rc1Linus Torvalds1-2/+2
2016-12-25powerpc: Fix build warning on 32-bit PPCLarry Finger1-1/+1
I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c14be ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25avoid spurious "may be used uninitialized" warningLinus Torvalds1-0/+1
The timer type simplifications caused a new gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’: drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); despite the actual use of "time_start" not having changed in any way. It appears that simply changing the type of ktime_t from a union to a plain scalar type made gcc check the use. The variable wasn't actually used uninitialized, but gcc apparently failed to notice that the conditional around the use was exactly the same as the conditional around the initialization of that variable. Add an unnecessary initialization just to shut up the compiler. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds227-665/+604
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
2016-12-25Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds72-689/+308
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
2016-12-25Merge branch 'turbostat' of ↵Linus Torvalds3-371/+673
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow
2016-12-25mm: add PageWaiters indicating tasks are waiting for a page bitNicholas Piggin9-50/+174
Add a new page flag, PageWaiters, to indicate the page waitqueue has tasks waiting. This can be tested rather than testing waitqueue_active which requires another cacheline load. This bit is always set when the page has tasks on page_waitqueue(page), and is set and cleared under the waitqueue lock. It may be set when there are no tasks on the waitqueue, which will cause a harmless extra wakeup check that will clears the bit. The generic bit-waitqueue infrastructure is no longer used for pages. Instead, waitqueues are used directly with a custom key type. The generic code was not flexible enough to have PageWaiters manipulation under the waitqueue lock (which simplifies concurrency). This improves the performance of page lock intensive microbenchmarks by 2-3%. Putting two bits in the same word opens the opportunity to remove the memory barrier between clearing the lock bit and testing the waiters bit, after some work on the arch primitives (e.g., ensuring memory operand widths match and cover both bits). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBackedNicholas Piggin4-18/+25
A page is not added to the swap cache without being swap backed, so PageSwapBacked mappings can use PG_owner_priv_1 for PageSwapCache. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25ktime: Get rid of ktime_equal()Thomas Gleixner4-20/+4
No point in going through loops and hoops instead of just comparing the values. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner56-95/+84
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner48-227/+200
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner132-327/+320
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-25irqchip/armada-xp: Consolidate hotplug state spaceThomas Gleixner2-2/+1
The mpic is either the main interrupt controller or is cascaded behind a GIC. The mpic is single instance and the modes are mutually exclusive, so there is no reason to have seperate cpu hotplug states. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20161221192112.333161745@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25irqchip/gic: Consolidate hotplug state spaceThomas Gleixner2-2/+1
Even if both drivers are compiled in only one instance can run on a given system depending on the available GIC version. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.252416267@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25coresight/etm3/4x: Consolidate hotplug state spaceThomas Gleixner2-3/+2
Even if both drivers are compiled in only one instance can run on a given system depending on the available tracer cell. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/20161221192112.162765484@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner59-77/+77
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Remove obsolete cpu hotplug register/unregister functionsThomas Gleixner6-340/+1
hotcpu_notifier(), cpu_notifier(), __hotcpu_notifier(), __cpu_notifier(), register_hotcpu_notifier(), register_cpu_notifier(), __register_hotcpu_notifier(), __register_cpu_notifier(), unregister_hotcpu_notifier(), unregister_cpu_notifier(), __unregister_hotcpu_notifier(), __unregister_cpu_notifier() are unused now. Remove them and all related code. Remove also the now pointless cpu notifier error injection mechanism. The states can be executed step by step and error rollback is the same as cpu down, so any state transition can be tested w/o requiring the notifier error injection. Some CPU hotplug states are kept as they are (ab)used for hotplug state tracking. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161221192112.005642358@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25staging/lustre/libcfs: Convert to hotplug state machineAnna-Maria Gleixner2-40/+46
Install the callbacks via the state machine. No functional change. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: devel@driverdev.osuosl.org Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: rt@linutronix.de Cc: lustre-devel@lists.lustre.org Link: http://lkml.kernel.org/r/20161202110027.htzzeervzkoc4muv@linutronix.de Link: http://lkml.kernel.org/r/20161221192111.922872524@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25scsi/bnx2i: Convert to hotplug state machineSebastian Andrzej Siewior2-48/+31
Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.836895753@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25scsi/bnx2fc: Convert to hotplug state machineSebastian Andrzej Siewior2-46/+34
Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.757309869@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Prevent overwriting of callbacksThomas Gleixner1-46/+50
Developers manage to overwrite states blindly without thought. That's fatal and hard to debug. Add sanity checks to make it fail. This requries to restructure the code so that the dynamic state allocation happens in the same lock protected section as the actual store. Otherwise the previous assignment of 'Reserved' to the name field would trigger the overwrite check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25x86/msr: Remove bogus cleanup from the error pathThomas Gleixner1-1/+0
The error cleanup which is invoked when the hotplug state setup failed tries to remove the failed state, which is broken. Fixes: 8fba38c937cd ("x86/msr: Convert to hotplug state machine") Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de>
2016-12-25bus: arm-ccn: Prevent hotplug callback leakThomas Gleixner1-1/+4
In case the driver registration fails, the hotplug callback is leaked. Not fatal, because it's never invoked as there are no instances registered, but wrong nevertheless. Fixes: fdc15a36d84e ("bus/arm-ccn: Convert to hotplug statemachine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com>
2016-12-25perf/x86/intel/cstate: Prevent hotplug callback leakThomas Gleixner1-7/+7
If the pmu registration fails the registered hotplug callbacks are not removed. Wrong in any case, but fatal in case of a modular driver. Replace the nonsensical state names with proper ones while at it. Fixes: 77c34ef1c319 ("perf/x86/intel/cstate: Convert Intel CSTATE to hotplug state machine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org
2016-12-25ARM/imx/mmcd: Fix broken cpu hotplug handlingThomas Gleixner1-12/+22
The cpu hotplug support of this perf driver is broken in several ways: 1) It adds a instance before setting up the state. 2) The state for the instance is different from the state of the callback. It's just a randomly chosen state. 3) The instance registration is not error checked so nobody noticed that the call can never succeed. 4) The state for the multi install callbacks is chosen randomly and overwrites existing state. This is now prevented by the core code so the call is guaranteed to fail. 5) The error exit path in the init function leaves the instance registered and then frees the memory which contains the enqueued hlist node. 6) The remove function is removing the state and not the instance. Fix it by: - Setting up the state before adding instances. Use a dynamically allocated state for it. - Installing instances after the state has been set up - Removing the instance in the error path before freeing memory - Removing the instance not the state in the driver remove callback While at is use raw_cpu_processor_id(), because cpu_processor_id() cannot be used in preemptible context, and set the driver data after successful registration of the pmu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Frank Li <frank.li@nxp.com> Cc: Zhengyu Shen <zhengyu.shen@nxp.com> Link: http://lkml.kernel.org/r/20161221192111.596204211@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25scsi: qedi: Convert to hotplug state machineThomas Gleixner1-64/+32
The CPU hotplug code is a trainwreck. It leaks a notifier in case of driver registration error and the per cpu loop is racy against cpu hotplug. Aside of that the driver should have been written and merged with the new state machine interfaces in the first place. Mop up the mess and Convert it to the hotplug state machine. Signed-off-by: Thomas Grumpy Gleixner <tglx@linutronix.de> Cc: Nilesh Javali <nilesh.javali@cavium.com> Cc: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Cc: Chad Dupuis <chad.dupuis@cavium.com> Cc: Saurav Kashyap <saurav.kashyap@cavium.com> Cc: Arun Easi <arun.easi@cavium.com> Cc: Manish Rangankar <manish.rangankar@cavium.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2016-12-24tools/power turbostat: remove obsolete -M, -m, -C, -c optionsLen Brown2-110/+2
The new --add option has replaced the -M, -m, -C, -c options Eg. -M 0x10 is now --add msr0x10,raw -m 0x10 is now --add msr0x10,raw,u32 -C 0x10 is now --add msr0x10,delta -c 0x10 is now --add msr0x10,delta,u32 The --add option can be repeated to add any number of counters, while the previous options were limited to adding one of each type. In addition, the --add option can accept a column label, and can also display a counter as a percentage of elapsed cycles. Eg. --add msr0x3fe,core,percent,MY_CC3 Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-24tools/power turbostat: Make extensible via the --add parameterLen Brown2-9/+409
Create the "--add" parameter. This can be used to teach an existing turbostat binary about any number of any type of counter. turbostat(8) details the syntax for --add. Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1088-1088/+1088
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds14-90/+177
Pull cifs fixes from Steve French: "This ncludes various cifs/smb3 bug fixes, mostly for stable as well. In the next week I expect that Germano will have some reconnection fixes, and also I expect to have the remaining pieces of the snapshot enablement and SMB3 ACLs, but wanted to get this set of bug fixes in" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs_get_root shouldn't use path with tree name Fix default behaviour for empty domains and add domainauto option cifs: use %16phN for formatting md5 sum cifs: Fix smbencrypt() to stop pointing a scatterlist at the stack CIFS: Fix a possible double locking of mutex during reconnect CIFS: Fix a possible memory corruption during reconnect CIFS: Fix a possible memory corruption in push locks CIFS: Fix missing nls unload in smb2_reconnect() CIFS: Decrease verbosity of ioctl call SMB3: parsing for new snapshot timestamp mount parm
2016-12-24Merge tag 'watchdog-for-linus-v4.10' of ↵Linus Torvalds18-58/+262
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull watchdog updates from Wim Van Sebroeck and Guenter Roeck: - new driver for Add Loongson1 SoC - minor cleanup and fixes in various drivers * tag 'watchdog-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: watchdog: it87_wdt: add IT8620E ID watchdog: mpc8xxx: Remove unneeded linux/miscdevice.h include watchdog: octeon: Remove unneeded linux/miscdevice.h include watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate watchdog: loongson1: Add Loongson1 SoC watchdog driver watchdog: cpwd: remove memory allocate failure message watchdog: da9062/61: watchdog driver intel-mid_wdt: Error code is just an integer intel-mid_wdt: make sure watchdog is not running at startup watchdog: mei_wdt: request stop on reboot to prevent false positive event watchdog: hpwdt: changed maintainer information watchdog: jz4740: Fix modular build watchdog: qcom: fix kernel panic due to external abort on non-linefetch watchdog: davinci: add support for deferred probing watchdog: meson: Remove unneeded platform MODULE_ALIAS watchdog: Standardize leading tabs and spaces in Kconfig file watchdog: max77620_wdt: fix module autoload watchdog: bcm7038_wdt: fix module autoload
2016-12-24Merge tag 'ntb-4.10' of git://github.com/jonmason/ntbLinus Torvalds7-33/+741
Pull NTB update from Jon Mason: - NTB bug fixes for removing an unnecessary call to ntb_peer_spad_read, and correcting a free_irq inconsistency - add Intel SKX support - change the AMD NTB maintainer, and fix some bugs present there * tag 'ntb-4.10' of git://github.com/jonmason/ntb: ntb_transport: Remove unnecessary call to ntb_peer_spad_read NTB: Fix 'request_irq()' and 'free_irq()' inconsistancy ntb: fix SKX NTB config space size register offsets NTB: correct ntb_peer_spad_read for case when callback is not supplied. MAINTAINERS: Change in maintainer for AMD NTB ntb_transport: Limit memory windows based on available, scratchpads NTB: Register and offset values fix for memory window NTB: add support for hotplug feature ntb: Adding Skylake Xeon NTB support
2016-12-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds23-117/+279
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "There's a number of fixes: - a round of fixes for CPUID-less legacy CPUs - a number of microcode loader fixes - i8042 detection robustization fixes - stack dump/unwinder fixes - x86 SoC platform driver fixes - a GCC 7 warning fix - virtualization related fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) Revert "x86/unwind: Detect bad stack return address" x86/paravirt: Mark unused patch_default label x86/microcode/AMD: Reload proper initrd start address x86/platform/intel/quark: Add printf attribute to imr_self_test_result() x86/platform/intel-mid: Switch MPU3050 driver to IIO x86/alternatives: Do not use sync_core() to serialize I$ x86/topology: Document cpu_llc_id x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic x86/asm: Rewrite sync_core() to use IRET-to-self x86/microcode/intel: Replace sync_core() with native_cpuid() Revert "x86/boot: Fail the boot if !M486 and CPUID is missing" x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels x86/cpu: Probe CPUID leaf 6 even when cpuid_level == 6 x86/tools: Fix gcc-7 warning in relocs.c x86/unwind: Dump stack data on warnings x86/unwind: Adjust last frame check for aligned function stacks x86/init: Fix a couple of comment typos x86/init: Remove i8042_detect() from platform ops Input: i8042 - Trust firmware a bit more when probing on X86 x86/init: Add i8042 state to the platform data ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 01:28:53 +0000