summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-04-20Merge tag 'keys-fixes-20170419' of ↵Linus Torvalds3-27/+39
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyrings fixes from David Howells: (1) Disallow keyrings whose name begins with a '.' to be joined [CVE-2016-9604]. (2) Change the name of the dead type to ".dead" to prevent user access [CVE-2017-6951]. (3) Fix keyctl_set_reqkey_keyring() to not leak thread keyrings [CVE-2017-7472] * tag 'keys-fixes-20170419' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyrings KEYS: Change the name of the dead type to ".dead" to prevent user access KEYS: Disallow keyrings beginning with '.' to be joined as session keyrings
2017-04-20Merge tag 'mac80211-for-davem-2017-04-18' of ↵David S. Miller1-18/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A single fix, for the MU-MIMO monitor mode, that fixes bad SKB accesses if the SKB was paged, which is the case for the only driver supporting this - iwlwifi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20genirq/affinity: Fix calculating vectors to assignKeith Busch1-1/+1
The vectors_per_node is calculated from the remaining available vectors. The current vector starts after pre_vectors, so we need to subtract that from the current to properly account for the number of remaining vectors to assign. Fixes: 3412386b531 ("irq/affinity: Fix extra vecs calculation") Reported-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Link: http://lkml.kernel.org/r/1492645870-13019-1-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for DDR50 cardHaibo Chen1-0/+1
Currently for DDR50 card, it need tuning in default. We meet tuning fail issue for DDR50 card and some data CRC error when DDR50 sd card works. This is because the default pad I/O drive strength can't make sure DDR50 card work stable. So increase the pad I/O drive strength for DDR50 card, and use pins_100mhz. This fixes DDR50 card support for IMX since DDR50 tuning was enabled from commit 9faac7b95ea4 ("mmc: sdhci: enable tuning for DDR50") Tested-and-reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.4+ Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-20HID: wacom: Override incorrect logical maximum contact identifierJason Gerecke1-0/+10
It apears that devices designed around Wacom's G11 chipset (e.g. Lenovo ThinkPad Yoga 260, Lenovo ThinkPad X1 Yoga, Dell XPS 12 9250, Dell Venue 8 Pro 5855, etc.) suffer from a common issue in their HID descriptors. The logical maximum is not updated for the "Contact Identifier" usage, leaving it as just "1" despite these devices being capable of tracking far more touches. Commit 60a221869803 began ignoring usages with out-of-range values, causing problems for devices based on this chipset. Touches after the first will have an out-of-range Contact Identifier, and ignoring that usage will cause the kernel to incorrectly slot each finger's events (along with all the knock-on userspace effects that entails). This commit checks for these buggy descriptors and updates the maximum where required. Prior chipsets have used "255" as the maximum (and the G11, at least, doesn't seem to actually use IDs outside the range of 1..CONTACTMAX) so continue using this value. Cc: stable@vger.kernel.org Fixes: 60a221869803 ("HID: wacom: generic: add support for touchring") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-19ring-buffer: Have ring_buffer_iter_empty() return true when emptySteven Rostedt (VMware)1-2/+14
I noticed that reading the snapshot file when it is empty no longer gives a status. It suppose to show the status of the snapshot buffer as well as how to allocate and use it. For example: ># cat snapshot # tracer: nop # # # * Snapshot is allocated * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') But instead it just showed an empty buffer: ># cat snapshot # tracer: nop # # entries-in-buffer/entries-written: 0/0 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | What happened was that it was using the ring_buffer_iter_empty() function to see if it was empty, and if it was, it showed the status. But that function was returning false when it was empty. The reason was that the iter header page was on the reader page, and the reader page was empty, but so was the buffer itself. The check only tested to see if the iter was on the commit page, but the commit page was no longer pointing to the reader page, but as all pages were empty, the buffer is also. Cc: stable@vger.kernel.org Fixes: 651e22f2701b ("ring-buffer: Always reset iterator to reader page") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-19Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds5-3/+84
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd" - one stm32f4 fix for a change that introduced the PLL_I2S and PLL_SAI boards - two Allwinner clk driver build fixes - two Allwinner CPU clk driver fixes where we see random CPUFreq crashes because the CPU's PLL locks up sometimes when we change the rate * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER clk: stm32f4: fix: exclude values 0 and 1 for PLLQ
2017-04-19Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds1-0/+10
Pull CIFS fix from Steve French: "One more cifs fix for stable" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: Do not send echoes before Negotiate is complete
2017-04-19nsfs: mark dentry with DCACHE_RCUACCESSCong Wang1-0/+1
Andrey reported a use-after-free in __ns_get_path(): spin_lock include/linux/spinlock.h:299 [inline] lockref_get_not_dead+0x19/0x80 lib/lockref.c:179 __ns_get_path+0x197/0x860 fs/nsfs.c:66 open_related_ns+0xda/0x200 fs/nsfs.c:143 sock_ioctl+0x39d/0x440 net/socket.c:1001 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 We are under rcu read lock protection at that point: rcu_read_lock(); d = atomic_long_read(&ns->stashed); if (!d) goto slow; dentry = (struct dentry *)d; if (!lockref_get_not_dead(&dentry->d_lockref)) goto slow; rcu_read_unlock(); but don't use a proper RCU API on the free path, therefore a parallel __d_free() could free it at the same time. We need to mark the stashed dentry with DCACHE_RCUACCESS so that __d_free() will be called after all readers leave RCU. Fixes: e149ed2b805f ("take the targets of /proc/*/ns/* symlinks to separate fs") Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-19mm: make mm_percpu_wq non freezableMichal Hocko1-2/+1
Geert has reported a freeze during PM resume and some additional debugging has shown that the device_resume worker cannot make a forward progress because it waits for an event which is stuck waiting in drain_all_pages: INFO: task kworker/u4:0:5 blocked for more than 120 seconds. Not tainted 4.11.0-rc7-koelsch-00029-g005882e53d62f25d-dirty #3476 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u4:0 D 0 5 2 0x00000000 Workqueue: events_unbound async_run_entry_fn __schedule schedule schedule_timeout wait_for_common dpm_wait_for_superior device_resume async_resume async_run_entry_fn process_one_work worker_thread kthread [...] bash D 0 1703 1694 0x00000000 __schedule schedule schedule_timeout wait_for_common flush_work drain_all_pages start_isolate_page_range alloc_contig_range cma_alloc __alloc_from_contiguous cma_allocator_alloc __dma_alloc arm_dma_alloc sh_eth_ring_init sh_eth_open sh_eth_resume dpm_run_callback device_resume dpm_resume dpm_resume_end suspend_devices_and_enter pm_suspend state_store kernfs_fop_write __vfs_write vfs_write SyS_write [...] Showing busy workqueues and worker pools: [...] workqueue mm_percpu_wq: flags=0xc pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=0/0 delayed: drain_local_pages_wq, vmstat_update pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=0/0 delayed: drain_local_pages_wq BAR(1703), vmstat_update Tetsuo has properly noted that mm_percpu_wq is created as WQ_FREEZABLE so it is frozen this early during resume so we are effectively deadlocked. Fix this by dropping WQ_FREEZABLE when creating mm_percpu_wq. We really want to have it operational all the time. Fixes: ce612879ddc7 ("mm: move pcp and lru-pcp draining into single wq") Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-19Merge tag 'backlight-for-v4.11' of ↵Linus Torvalds1-3/+4
git://git.linaro.org/people/daniel.thompson/linux Pull backlight fix from Daniel Thompson: "Normally pull requests for backlight come from Lee Jones (and will continue to do so) but the bug fixed here is annoying for few people so I'm providing a little holiday cover. Fix a single bug in the PWM backlight driver and make it play nice with a wider range of GPIO devices. This bug is a regression and was independently discovered by Geert Uytterhoevan and Paul Kocialkowski (and is tested by both)" * tag 'backlight-for-v4.11' of git://git.linaro.org/people/daniel.thompson/linux: backlight: pwm_bl: Fix GPIO out for unimplemented .get_direction()
2017-04-19ACPI / power: Avoid maybe-uninitialized warningArnd Bergmann1-0/+1
gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing) Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-19mtip32xx: pass BLK_MQ_F_NO_SCHEDMing Lei1-1/+1
The recent introduced MQ IO scheduler breaks mtip32xx in the following way. mtip32xx use the 'request_index' passed to .init_request() as hardware tag index for initializing hardware queue, and it actually require that rq->tag is always same with 'request_index' passed to .init_request(). Current blk-mq IO scheduler can't guarantee this point, so this patch passes BLK_MQ_F_NO_SCHED and at least make mtip32xx working. This patch fixes the following strange hardware failure. The issue can be triggered easily when doing I/O with mq-deadline enabled. [ 186.972578] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 32993 [ 186.972578] {1}[Hardware Error]: event severity: fatal [ 186.972579] {1}[Hardware Error]: Error 0, type: fatal [ 186.972580] {1}[Hardware Error]: section_type: PCIe error [ 186.972580] {1}[Hardware Error]: port_type: 0, PCIe end point [ 186.972581] {1}[Hardware Error]: version: 1.0 [ 186.972581] {1}[Hardware Error]: command: 0x0407, status: 0x0010 [ 186.972582] {1}[Hardware Error]: device_id: 0000:07:00.0 [ 186.972582] {1}[Hardware Error]: slot: 4 [ 186.972583] {1}[Hardware Error]: secondary_bus: 0x00 [ 186.972583] {1}[Hardware Error]: vendor_id: 0x1344, device_id: 0x5150 [ 186.972584] {1}[Hardware Error]: class_code: 008001 [ 186.972585] Kernel panic - not syncing: Fatal hardware error! Reported-by: Jozef Mikovic <jmikovic@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19block: respect BLK_MQ_F_NO_SCHEDMing Lei1-2/+10
If one driver claims that it doesn't support io scheduler via BLK_MQ_F_NO_SCHED, we should not allow to change and show the availabe io schedulers. This patch adds check to enhance this behaviour. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19backlight: pwm_bl: Fix GPIO out for unimplemented .get_direction()Geert Uytterhoeven1-3/+4
Commit 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial power state to a separate function") not just moved some code, but made slight changes in semantics. If a gpiochip doesn't implement the optional .get_direction() callback, gpiod_get_direction always returns -EINVAL, which is never equal to GPIOF_DIR_IN, leading to the GPIO not being configured for output. To avoid this, invert the test and check for not GPIOF_DIR_OUT instead, like the original code did. This restores the display on r8a7740/armadillo. Fixes: 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial power state to a separate function") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2017-04-19tracing: Allocate the snapshot buffer before enabling probeSteven Rostedt (VMware)1-3/+5
Currently the snapshot trigger enables the probe and then allocates the snapshot. If the probe triggers before the allocation, it could cause the snapshot to fail and turn tracing off. It's best to allocate the snapshot buffer first, and then enable the trigger. If something goes wrong in the enabling of the trigger, the snapshot buffer is still allocated, but it can also be freed by the user by writting zero into the snapshot buffer file. Also add a check of the return status of alloc_snapshot(). Cc: stable@vger.kernel.org Fixes: 77fd5c15e3 ("tracing: Add snapshot trigger to function probes") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-19HID: wacom: Treat HID_DG_TOOLSERIALNUMBER as unsignedJason Gerecke1-1/+1
Because HID_DG_TOOLSERIALNUMBER doesn't first cast the value recieved from HID to an unsigned type, sign-extension rules can cause the value of wacom_wac->serial[0] to inadvertently wind up with all 32 of its highest bits set if the highest bit of "value" was set. This can cause problems for Tablet PC devices which use AES sensors and the xf86-input-wacom userspace driver. It is not uncommon for AES sensors to send a serial number of '0' while the pen is entering or leaving proximity. The xf86-input-wacom driver ignores events with a serial number of '0' since it cannot match them up to an in-use tool. To ensure the xf86-input-wacom driver does not ignore the final out-of-proximity event, the kernel does not send MSC_SERIAL events when the value of wacom_wac->serial[0] is '0'. If the highest bit of HID_DG_TOOLSERIALNUMBER is set by an in-prox pen which later leaves proximity and sends a '0' for HID_DG_TOOLSERIALNUMBER, then only the lowest 32 bits of wacom_wac->serial[0] are actually cleared, causing the kernel to send an MSC_SERIAL event. Since the 'input_event' function takes an 'int' as argument, only those lowest (now-cleared) 32 bits of wacom_wac->serial[0] are sent to userspace, causing xf86-input-wacom to ignore the event. If the event was the final out-of-prox event, then xf86-input-wacom may remain in a state where it believes the pen is in proximity and refuses to allow other devices under its control (e.g. the touchscreen) to move the cursor. It should be noted that EMR devices and devices which use both the HID_DG_TOOLSERIALNUMBER and WACOM_HID_WD_SERIALHI usages (in that order) would be immune to this issue. It appears only AES devices are affected. Fixes: f85c9dc678a ("HID: wacom: generic: Support tool ID and additional tool types") Cc: stable@vger.kernel.org Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-18sh_eth: unmap DMA buffers when freeing ringsSergei Shtylyov1-55/+67
The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ubifs: Fix O_TMPFILE corner case in ubifs_link()Richard Weinberger1-0/+7
It is perfectly fine to link a tmpfile back using linkat(). Since tmpfiles are created with a link count of 0 they appear on the orphan list, upon re-linking the inode has to be removed from the orphan list again. Ralph faced a filesystem corruption in combination with overlayfs due to this bug. Cc: <stable@vger.kernel.org> Cc: Ralph Sennhauser <ralph.sennhauser@gmail.com> Cc: Amir Goldstein <amir73il@gmail.com> Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Reported-by: Amir Goldstein <amir73il@gmail.com> Fixes: 474b93704f321 ("ubifs: Implement O_TMPFILE") Signed-off-by: Richard Weinberger <richard@nod.at>
2017-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds4-7/+23
Pull sparc fixes from David Miller: "Two Sparc bug fixes from Daniel Jordan and Nitin Gupta" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix hugepage page table free sparc64: Use LOCKDEP_SMALL, not PROVE_LOCKING_SMALL
2017-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-58/+69
Pull networking fixes from David Miller: 1) BPF tail call handling bug fixes from Daniel Borkmann. 2) Fix allowance of too many rx queues in sfc driver, from Bert Kenward. 3) Non-loopback ipv6 packets claiming src of ::1 should be dropped, from Florian Westphal. 4) Statistics requests on KSZ9031 can crash, fix from Grygorii Strashko. 5) TX ring handling fixes in mediatek driver, from Sean Wang. 6) ip_ra_control can deadlock, fix lock acquisition ordering to fix, from Cong WANG. 7) Fix use after free in ip_recv_error(), from Willem de Buijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bpf: fix checking xdp_adjust_head on tail calls bpf: fix cb access in socket filter programs on tail calls ipv6: drop non loopback packets claiming to originate from ::1 net: ethernet: mediatek: fix inconsistency of port number carried in TXD net: ethernet: mediatek: fix inconsistency between TXD and the used buffer net: phy: micrel: fix crash when statistic requested for KSZ9031 phy net: vrf: Fix setting NLM_F_EXCL flag when adding l3mdev rule net: thunderx: Fix set_max_bgx_per_node for 81xx rgx net-timestamp: avoid use-after-free in ip_recv_error ipv4: fix a deadlock in ip_ra_control sfc: limit the number of receive queues
2017-04-18x86/mce: Make the MCE notifier a blocking oneVishal Verma3-16/+5
The NFIT MCE handler callback (for handling media errors on NVDIMMs) takes a mutex to add the location of a memory error to a list. But since the notifier call chain for machine checks (x86_mce_decoder_chain) is atomic, we get a lockdep splat like: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 0, pid: 4, name: kworker/0:0 [..] Call Trace: dump_stack ___might_sleep __might_sleep mutex_lock_nested ? __lock_acquire nfit_handle_mce notifier_call_chain atomic_notifier_call_chain ? atomic_notifier_call_chain mce_gen_pool_process Convert the notifier to a blocking one which gets to run only in process context. Boris: remove the notifier call in atomic context in print_mce(). For now, let's print the MCE on the atomic path so that we can make sure they go out and get logged at least. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20170411224457.24777-1-vishal.l.verma@intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-18sparc64: Fix hugepage page table freeNitin Gupta1-0/+16
Make sure the start adderess is aligned to PMD_SIZE boundary when freeing page table backing a hugepage region. The issue was causing segfaults when a region backed by 64K pages was unmapped since such a region is in general not PMD_SIZE aligned. Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18sparc64: Use LOCKDEP_SMALL, not PROVE_LOCKING_SMALLDaniel Jordan3-7/+7
CONFIG_PROVE_LOCKING_SMALL shrinks the memory usage of lockdep so the kernel text, data, and bss fit in the required 32MB limit, but this option is not set for every config that enables lockdep. A 4.10 kernel fails to boot with the console output Kernel: Using 8 locked TLB entries for main kernel image. hypervisor_tlb_lock[2000000:0:8000000071c007c3:1]: errors with f Program terminated with these config options CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y CONFIG_PROVE_LOCKING=n To fix, rename CONFIG_PROVE_LOCKING_SMALL to CONFIG_LOCKDEP_SMALL, and enable this option with CONFIG_LOCKDEP=y so we get the reduced memory usage every time lockdep is turned on. Tested that CONFIG_LOCKDEP_SMALL is set to 'y' if and only if CONFIG_LOCKDEP is set to 'y'. When other lockdep-related config options that select CONFIG_LOCKDEP are enabled (e.g. CONFIG_LOCK_STAT or CONFIG_PROVE_LOCKING), verified that CONFIG_LOCKDEP_SMALL is also enabled. Fixes: e6b5f1be7afe ("config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18mmc: dw_mmc: Don't allow Runtime PM for SDIO cardsDouglas Anderson1-2/+9
According to the SDIO standard interrupts are normally signalled in a very complicated way. They require the card clock to be running and require the controller to be paying close attention to the signals coming from the card. This simply can't happen with the clock stopped or with the controller in a low power mode. To that end, we'll disable runtime_pm when we detect that an SDIO card was inserted. This is much like with what we do with the special "SDMMC_CLKEN_LOW_PWR" bit that dw_mmc supports. NOTE: we specifically do this Runtime PM disabling at card init time rather than in the enable_sdio_irq() callback. This is _different_ than how SDHCI does it. Why do we do it differently? - Unlike SDHCI, dw_mmc uses the standard sdio_irq code in Linux (AKA dw_mmc doesn't set MMC_CAP2_SDIO_IRQ_NOTHREAD). - Because we use the standard sdio_irq code: - We see a constant stream of enable_sdio_irq(0) and enable_sdio_irq(1) calls. This is because the standard code disables interrupts while processing and re-enables them after. - While interrupts are disabled, there's technically a period where we could get runtime disabled while processing interrupts. - If we are runtime disabled while processing interrupts, we'll reset the controller at resume time (see dw_mci_runtime_resume), which seems like a terrible idea because we could possibly have another interrupt pending. To fix the above isues we'd want to put something in the standard sdio_irq code that makes sure to call pm_runtime get/put when interrupts are being actively being processed. That's possible to do, but it seems like a more complicated mechanism when we really just want the runtime pm disabled always for SDIO cards given that all the other bits needed to get Runtime PM vs. SDIO just aren't there. NOTE: at some point in time someone might come up with a fancy way to do SDIO interrupts and still allow (some) amount of runtime PM. Technically we could turn off the card clock if we used an alternate way of signaling SDIO interrupts (and out of band interrupt is one way to do this). We probably wouldn't actually want to fully runtime suspend in this case though--at least not with the current dw_mci_runtime_resume() which basically fully resets the controller at resume time. Fixes: e9ed8835e990 ("mmc: dw_mmc: add runtime PM callback") Cc: <stable@vger.kernel.org> Reported-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-18Input: elantech - add Fujitsu Lifebook E547 to force crc_enabledThorsten Leemhuis1-0/+8
Temporary got a Lifebook E547 into my hands and noticed the touchpad only works after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add it to the list of machines that need this workaround. Cc: stable@vger.kernel.org Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-18Merge tag 'trace-v4.11-rc5-4' of ↵Linus Torvalds1-0/+117
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace testcase update from Steven Rostedt: "While testing my development branch, without the fix for the pid use after free bug, the selftest that Namhyung added triggers it. I figured it would be good to add the test for the bug after the fix, such that it does not exist without the fix. I added another patch that lets the test only test part of the pid filtering, and ignores the function-fork (filtering on children as well) if the function-fork feature does not exist. This feature is added by Namhyung just before he added this test. But since the test tests both with and without the feature, it would be good to let it not fail if the feature does not exist" * tag 'trace-v4.11-rc5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests: ftrace: Add check for function-fork before running pid filter test selftests: ftrace: Add a testcase for function PID filter
2017-04-18mmc: sdio: fix alignment issue in struct sdio_funcHeiner Kallweit2-2/+12
Certain 64-bit systems (e.g. Amlogic Meson GX) require buffers to be used for DMA to be 8-byte-aligned. struct sdio_func has an embedded small DMA buffer not meeting this requirement. When testing switching to descriptor chain mode in meson-gx driver SDIO is broken therefore. Fix this by allocating the small DMA buffer separately as kmalloc ensures that the returned memory area is properly aligned for every basic data type. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Helmut Klein <hgkr.klein@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-18selftests: ftrace: Add check for function-fork before running pid filter testSteven Rostedt (VMware)1-4/+23
Have the func-filter-pid test check for the function-fork option before testing it. It can still test the pid filtering, but will stop before testing the function-fork option for children inheriting the pids. This allows the test to be added before the function-fork feature, but after a bug fix that triggers one of the bugs the test can cause. Cc: Namhyung Kim <namhyung@kernel.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-18Merge tag 'trace-v4.11-rc5-3' of ↵Linus Torvalds3-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "Namhyung Kim discovered a use after free bug. It has to do with adding a pid filter to function tracing in an instance, and then freeing the instance" * tag 'trace-v4.11-rc5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix function pid filter on instances
2017-04-18Merge branch 'linus' of ↵Linus Torvalds5-35/+98
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following problems: - regression in new XTS/LRW code when used with async crypto - long-standing bug in ahash API when used with certain algos - bogus memory dereference in async algif_aead with certain algos" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_aead - Fix bogus request dereference in completion function crypto: ahash - Fix EINPROGRESS notification callback crypto: lrw - Fix use-after-free on EINPROGRESS crypto: xts - Fix use-after-free on EINPROGRESS
2017-04-18selftests: ftrace: Add a testcase for function PID filterNamhyung Kim1-0/+98
Like event pid filtering test, add function pid filtering test with the new "function-fork" option. It also tests it on an instance directory so that it can verify the bug related pid filtering on instances. Link: http://lkml.kernel.org/r/20170417024430.21194-5-namhyung@kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-18KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyringsEric Biggers2-24/+31
This fixes CVE-2017-7472. Running the following program as an unprivileged user exhausts kernel memory by leaking thread keyrings: #include <keyutils.h> int main() { for (;;) keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING); } Fix it by only creating a new thread keyring if there wasn't one before. To make things more consistent, make install_thread_keyring_to_cred() and install_process_keyring_to_cred() both return 0 if the corresponding keyring is already present. Fixes: d84f4f992cbd ("CRED: Inaugurate COW credentials") Cc: stable@vger.kernel.org # 2.6.29+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-18KEYS: Change the name of the dead type to ".dead" to prevent user accessDavid Howells1-1/+1
This fixes CVE-2017-6951. Userspace should not be able to do things with the "dead" key type as it doesn't have some of the helper functions set upon it that the kernel needs. Attempting to use it may cause the kernel to crash. Fix this by changing the name of the type to ".dead" so that it's rejected up front on userspace syscalls by key_get_type_from_user(). Though this doesn't seem to affect recent kernels, it does affect older ones, certainly those prior to: commit c06cfb08b88dfbe13be44a69ae2fdc3a7c902d81 Author: David Howells <dhowells@redhat.com> Date: Tue Sep 16 17:36:06 2014 +0100 KEYS: Remove key_type::match in favour of overriding default by match_preparse which went in before 3.18-rc1. Signed-off-by: David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org
2017-04-18KEYS: Disallow keyrings beginning with '.' to be joined as session keyringsDavid Howells1-2/+7
This fixes CVE-2016-9604. Keyrings whose name begin with a '.' are special internal keyrings and so userspace isn't allowed to create keyrings by this name to prevent shadowing. However, the patch that added the guard didn't fix KEYCTL_JOIN_SESSION_KEYRING. Not only can that create dot-named keyrings, it can also subscribe to them as a session keyring if they grant SEARCH permission to the user. This, for example, allows a root process to set .builtin_trusted_keys as its session keyring, at which point it has full access because now the possessor permissions are added. This permits root to add extra public keys, thereby bypassing module verification. This also affects kexec and IMA. This can be tested by (as root): keyctl session .builtin_trusted_keys keyctl add user a a @s keyctl list @s which on my test box gives me: 2 keys in keyring: 180010936: ---lswrv 0 0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05 801382539: --alswrv 0 0 user: a Fix this by rejecting names beginning with a '.' in the keyctl. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> cc: linux-ima-devel@lists.sourceforge.net cc: stable@vger.kernel.org
2017-04-18powerpc/64: Fix HMI exception on LE with CONFIG_RELOCATABLE=yMichael Ellerman2-5/+5
Prior to commit 2337d207288f ("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts"), the branch from hmi_exception_early() to hmi_exception_realmode() was just a bl hmi_exception_realmode, which the linker would turn into a bl to the local entry point of hmi_exception_realmode. This was broken when CONFIG_RELOCATABLE=y because hmi_exception_realmode() is not in the low part of the kernel text that is copied down to 0x0. But in fixing that, we added a new bug on little endian kernels. Because the branch is now a bctrl when CONFIG_RELOCATABLE=y, we branch to the global entry point of hmi_exception_realmode(). The global entry point must be called with r12 containing the address of hmi_exception_realmode(), because it uses that value to calculate the TOC value (r2). This may manifest as a checkstop, because we take a junk value from r12 which came from HSRR1, add a small constant to it and then use that as the TOC pointer. The HSRR1 value will have 0x9 as the top nibble, which puts it above RAM and somewhere in MMIO space. Fix it by changing the BRANCH_LINK_TO_FAR() macro to always use r12 to load the label we're branching to. This means r12 will be setup correctly on LE, fixing this bug, and r12 is also volatile across function calls on BE so it's a good choice anyway. Fixes: 2337d207288f ("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts") Reported-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18powerpc/kprobe: Fix oops when kprobed on 'stdu' instructionRavi Bangoria1-3/+3
If we set a kprobe on a 'stdu' instruction on powerpc64, we see a kernel OOPS: Bad kernel stack pointer cd93c840 at c000000000009868 Oops: Bad kernel stack pointer, sig: 6 [#1] ... GPR00: c000001fcd93cb30 00000000cd93c840 c0000000015c5e00 00000000cd93c840 ... NIP [c000000000009868] resume_kernel+0x2c/0x58 LR [c000000000006208] program_check_common+0x108/0x180 On a 64-bit system when the user probes on a 'stdu' instruction, the kernel does not emulate actual store in emulate_step() because it may corrupt the exception frame. So the kernel does the actual store operation in exception return code i.e. resume_kernel(). resume_kernel() loads the saved stack pointer from memory using lwz, which only loads the low 32-bits of the address, causing the kernel crash. Fix this by loading the 64-bit value instead. Fixes: be96f63375a1 ("powerpc: Split out instruction analysis part of emulate_step()") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> [mpe: Change log massage, add stable tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18af_key: Fix sadb_x_ipsecrequest parsingHerbert Xu1-21/+26
The parsing of sadb_x_ipsecrequest is broken in a number of ways. First of all we're not verifying sadb_x_ipsecrequest_len. This is needed when the structure carries addresses at the end. Worse we don't even look at the length when we parse those optional addresses. The migration code had similar parsing code that's better but it also has some deficiencies. The length is overcounted first of all as it includes the header itself. It also fails to check the length before dereferencing the sa_family field. This patch fixes those problems in parse_sockaddr_pair and then uses it in parse_ipsecrequest. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-17Merge branch 'parisc-4.11-5' of ↵Linus Torvalds1-31/+55
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "One patch which fixes get_user() for 64-bit values on 32-bit kernels. Up to now we lost the upper 32-bits of the returned 64-bit value" * 'parisc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix get_user() for 64-bit value on 32-bit kernel
2017-04-17cifs: Do not send echoes before Negotiate is completeSachin Prabhu1-0/+10
commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect long after socket reconnect") added support for Negotiate requests to be initiated by echo calls. To avoid delays in calling echo after a reconnect, I added the patch introduced by the commit b8c600120fc8 ("Call echo service immediately after socket reconnect"). This has however caused a regression with cifs shares which do not have support for echo calls to trigger Negotiate requests. On connections which need to call Negotiation, the echo calls trigger an error which triggers a reconnect which in turn triggers another echo call. This results in a loop which is only broken when an operation is performed on the cifs share. For an idle share, it can DOS a server. The patch uses the smb_operation can_echo() for cifs so that it is called only if connection has been already been setup. kernel bz: 194531 Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Tested-by: Jonathan Liu <net147@gmail.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <smfrench@gmail.com>
2017-04-17ftrace: Fix function pid filter on instancesNamhyung Kim3-0/+12
When function tracer has a pid filter, it adds a probe to sched_switch to track if current task can be ignored. The probe checks the ftrace_ignore_pid from current tr to filter tasks. But it misses to delete the probe when removing an instance so that it can cause a crash due to the invalid tr pointer (use-after-free). This is easily reproducible with the following: # cd /sys/kernel/debug/tracing # mkdir instances/buggy # echo $$ > instances/buggy/set_ftrace_pid # rmdir instances/buggy ============================================================================ BUG: KASAN: use-after-free in ftrace_filter_pid_sched_switch_probe+0x3d/0x90 Read of size 8 by task kworker/0:1/17 CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G B 4.11.0-rc3 #198 Call Trace: dump_stack+0x68/0x9f kasan_object_err+0x21/0x70 kasan_report.part.1+0x22b/0x500 ? ftrace_filter_pid_sched_switch_probe+0x3d/0x90 kasan_report+0x25/0x30 __asan_load8+0x5e/0x70 ftrace_filter_pid_sched_switch_probe+0x3d/0x90 ? fpid_start+0x130/0x130 __schedule+0x571/0xce0 ... To fix it, use ftrace_clear_pids() to unregister the probe. As instance_rmdir() already updated ftrace codes, it can just free the filter safely. Link: http://lkml.kernel.org/r/20170417024430.21194-2-namhyung@kernel.org Fixes: 0c8916c34203 ("tracing: Add rmdir to remove multibuffer instances") Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-17Merge branch 'bpf-fixes'David S. Miller1-0/+8
Daniel Borkmann says: ==================== Two BPF fixes The set fixes cb_access and xdp_adjust_head bits in struct bpf_prog, that are used for requirement checks on the program rather than f.e. heuristics. Thus, for tail calls, we cannot make any assumptions and are forced to set them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17bpf: fix checking xdp_adjust_head on tail callsDaniel Borkmann1-0/+1
Commit 17bedab27231 ("bpf: xdp: Allow head adjustment in XDP prog") added the xdp_adjust_head bit to the BPF prog in order to tell drivers that the program that is to be attached requires support for the XDP bpf_xdp_adjust_head() helper such that drivers not supporting this helper can reject the program. There are also drivers that do support the helper, but need to check for xdp_adjust_head bit in order to move packet metadata prepended by the firmware away for making headroom. For these cases, the current check for xdp_adjust_head bit is insufficient since there can be cases where the program itself does not use the bpf_xdp_adjust_head() helper, but tail calls into another program that uses bpf_xdp_adjust_head(). As such, the xdp_adjust_head bit is still set to 0. Since the first program has no control over which program it calls into, we need to assume that bpf_xdp_adjust_head() helper is used upon tail calls. Thus, for the very same reasons in cb_access, set the xdp_adjust_head bit to 1 when the main program uses tail calls. Fixes: 17bedab27231 ("bpf: xdp: Allow head adjustment in XDP prog") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17bpf: fix cb access in socket filter programs on tail callsDaniel Borkmann1-0/+7
Commit ff936a04e5f2 ("bpf: fix cb access in socket filter programs") added a fix for socket filter programs such that in i) AF_PACKET the 20 bytes of skb->cb[] area gets zeroed before use in order to not leak data, and ii) socket filter programs attached to TCP/UDP sockets need to save/restore these 20 bytes since they are also used by protocol layers at that time. The problem is that bpf_prog_run_save_cb() and bpf_prog_run_clear_cb() only look at the actual attached program to determine whether to zero or save/restore the skb->cb[] parts. There can be cases where the actual attached program does not access the skb->cb[], but the program tail calls into another program which does access this area. In such a case, the zero or save/restore is currently not performed. Since the programs we tail call into are unknown at verification time and can dynamically change, we need to assume that whenever the attached program performs a tail call, that later programs could access the skb->cb[], and therefore we need to always set cb_access to 1. Fixes: ff936a04e5f2 ("bpf: fix cb access in socket filter programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17ipv6: drop non loopback packets claiming to originate from ::1Florian Westphal1-2/+5
We lack a saddr check for ::1. This causes security issues e.g. with acls permitting connections from ::1 because of assumption that these originate from local machine. Assuming a source address of ::1 is local seems reasonable. RFC4291 doesn't allow such a source address either, so drop such packets. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17Merge tag 'sunxi-clk-fixes-for-4.11-2-bis' of ↵Stephen Boyd4-0/+74
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clock fixes for 4.11 from Maxime Ripard: Two build errors fixes for the sunxi-ng drivers. The two other patches fix random CPU crashes happening on the A33 since CPUFreq has been enabled in 4.11. * tag 'sunxi-clk-fixes-for-4.11-2-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
2017-04-17Merge branch 'mediatek-tx-bugs'David S. Miller2-17/+26
Sean Wang says: ==================== mediatek: Fix crash caused by reporting inconsistent skb->len to BQL Changes since v1: - fix inconsistent enumeration which easily causes the potential bug The series fixes kernel BUG caused by inconsistent SKB length reported into BQL. The reason for inconsistent length comes from hardware BUG which results in different port number carried on the TXD within the lifecycle of SKB. So patch 2) is proposed for use a software way to track which port the SKB involving instead of hardware way. And patch 1) is given for another issue I found which causes TXD and SKB inconsistency that is not expected in the initial logic, so it is also being corrected it in the series. The log for the kernel BUG caused by the issue is posted as below. [ 120.825955] kernel BUG at ... lib/dynamic_queue_limits.c:26! [ 120.837684] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 120.842778] Modules linked in: [ 120.845811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-191576-gdbcef47 #35 [ 120.853488] Hardware name: Mediatek Cortex-A7 (Device Tree) [ 120.859012] task: c1007480 task.stack: c1000000 [ 120.863510] PC is at dql_completed+0x108/0x17c [ 120.867915] LR is at 0x46 [ 120.870512] pc : [<c03c19c8>] lr : [<00000046>] psr: 80000113 [ 120.870512] sp : c1001d58 ip : c1001d80 fp : c1001d7c [ 120.881895] r10: 0000003e r9 : df6b3400 r8 : 0ed86506 [ 120.887075] r7 : 00000001 r6 : 00000001 r5 : 0ed8654c r4 : df0135d8 [ 120.893546] r3 : 00000001 r2 : df016800 r1 : 0000fece r0 : df6b3480 [ 120.900018] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 120.907093] Control: 10c5387d Table: 9e27806a DAC: 00000051 [ 120.912789] Process swapper/0 (pid: 0, stack limit = 0xc1000218) [ 120.918744] Stack: (0xc1001d58 to 0xc1002000) .... 121.085331] 1fc0: 00000000 c0a52a28 00000000 c10855d4 c1003c58 c0a52a24 c100885c 8000406a [ 121.093444] 1fe0: 410fc073 00000000 00000000 c1001ff8 8000807c c0a009cc 00000000 00000000 [ 121.101575] [<c03c19c8>] (dql_completed) from [<c04cb010>] (mtk_napi_tx+0x1d0/0x37c) [ 121.109263] [<c04cb010>] (mtk_napi_tx) from [<c05e28cc>] (net_rx_action+0x24c/0x3b8) [ 121.116951] [<c05e28cc>] (net_rx_action) from [<c010152c>] (__do_softirq+0xe4/0x35c) [ 121.124638] [<c010152c>] (__do_softirq) from [<c012a624>] (irq_exit+0xe8/0x150) [ 121.131895] [<c012a624>] (irq_exit) from [<c017750c>] (__handle_domain_irq+0x70/0xc4) [ 121.139666] [<c017750c>] (__handle_domain_irq) from [<c0101404>] (gic_handle_irq+0x58/0x9c) [ 121.147953] [<c0101404>] (gic_handle_irq) from [<c010e18c>] (__irq_svc+0x6c/0x90) [ 121.155373] Exception stack(0xc1001ef8 to 0xc1001f40) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: ethernet: mediatek: fix inconsistency of port number carried in TXDSean Wang2-8/+18
Fix port inconsistency on TXD due to hardware BUG that would cause different port number is carried on the same TXD between tx_map() and tx_unmap() with the iperf test. It would cause confusing BQL logic which leads to kernel panic when dual GMAC runs concurrently. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: ethernet: mediatek: fix inconsistency between TXD and the used bufferSean Wang1-9/+8
Fix inconsistency between the TXD descriptor and the used buffer that would cause unexpected logic at mtk_tx_unmap() during skb housekeeping. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: micrel: fix crash when statistic requested for KSZ9031 phyGrygorii Strashko1-15/+2
Now the command: ethtool --phy-statistics eth0 will cause system crash with meassage "Unable to handle kernel NULL pointer dereference at virtual address 00000010" from: (kszphy_get_stats) from [<c069f1d8>] (ethtool_get_phy_stats+0xd8/0x210) (ethtool_get_phy_stats) from [<c06a0738>] (dev_ethtool+0x5b8/0x228c) (dev_ethtool) from [<c06b5484>] (dev_ioctl+0x3fc/0x964) (dev_ioctl) from [<c0679f7c>] (sock_ioctl+0x170/0x2c0) (sock_ioctl) from [<c02419d4>] (do_vfs_ioctl+0xa8/0x95c) (do_vfs_ioctl) from [<c02422c4>] (SyS_ioctl+0x3c/0x64) (SyS_ioctl) from [<c0107d60>] (ret_fast_syscall+0x0/0x44) The reason: phy_driver structure for KSZ9031 phy has no .probe() callback defined. As result, struct phy_device *phydev->priv pointer will not be initializes (null). This issue will affect also following phys: KSZ8795, KSZ886X, KSZ8873MLL, KSZ9031, KSZ9021, KSZ8061, KS8737 Fix it by: - adding .probe() = kszphy_probe() callback to KSZ9031, KSZ9021 phys. The kszphy_probe() can be re-used as it doesn't do any phy specific settings. - removing statistic callbacks from other phys (KSZ8795, KSZ886X, KSZ8873MLL, KSZ8061, KS8737) as they doesn't have corresponding statistic counters. Fixes: 2b2427d06426 ("phy: micrel: Add ethtool statistics counters") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-23 01:00:43 +0000