summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-03-19Linux 4.11-rc3v4.11-rc3Linus Torvalds1-1/+1
2017-03-19mm/swap: don't BUG_ON() due to uninitialized swap slot cacheLinus Torvalds1-1/+1
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-19Merge tag 'powerpc-4.11-5' of ↵Linus Torvalds4-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc fixes from Michael Ellerman: "A couple of minor powerpc fixes for 4.11: - wire up statx() syscall - don't print a warning on memory hotplug when HPT resizing isn't available Thanks to: David Gibson, Chandan Rajendra" * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Don't give a warning when HPT resizing isn't available powerpc: Wire up statx() syscall
2017-03-19Merge branch 'parisc-4.11-2' of ↵Linus Torvalds8-68/+88
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in modules with CONFIG_MODVERSIONS. - Dave Anglin optimized the cache flushing for vmap ranges. - Arvind Yadav provided a fix for a potential NULL pointer dereference in the parisc perf code (and some code cleanups). - I wired up the new statx system call, fixed some compiler warnings with the access_ok() macro and fixed shutdown code to really halt a system at shutdown instead of crashing & rebooting. * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix system shutdown halt parisc: perf: Fix potential NULL pointer dereference parisc: Avoid compiler warnings with access_ok() parisc: Wire up statx system call parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range parisc: support R_PARISC_SECREL32 relocation in modules
2017-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds25-548/+1274
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
2017-03-19Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-3/+30
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax fixes from Dan Williams: "The device-dax driver was not being careful to handle falling back to smaller fault-granularity sizes. The driver already fails fault attempts that are smaller than the device's alignment, but it also needs to handle the cases where a larger page mapping could be established. For simplicity of the immediate fix the implementation just signals VM_FAULT_FALLBACK until fault-size == device-alignment. One fix is for -stable to address pmd-to-pte fallback from the original implementation, another fix is for the new (introduced in 4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the ride. These have received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix debug output typo device-dax: fix pud fault fallback handling device-dax: fix pmd/pte fault fallback handling
2017-03-18qla2xxx: Update driver version to 9.00.00.00-kHimanshu Madhani1-3/+3
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran6-20/+81
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Change scsi host lookup method.Quinn Tran7-40/+100
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add DebugFS node to display Port DatabaseHimanshu Madhani2-4/+90
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran6-65/+279
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add async new target notificationQuinn Tran2-3/+4
Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Export DIF stats via debugfsAnil Gurumurthy2-0/+27
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Improve T10-DIF/PI handling in driver.Quinn Tran7-251/+406
Add routines to support T10 DIF tag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow relogin to proceed if remote login did not finishQuinn Tran4-8/+32
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix sess_lock & hardware_lock lock order problem.Quinn Tran1-23/+18
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix inadequate lock protection for ABTS.Quinn Tran1-2/+10
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix request queue corruption.Quinn Tran1-3/+9
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix memory leak for abts processingQuinn Tran1-0/+2
Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow vref count to timeout on vport delete.Joe Carnuccio5-10/+16
Cc: <stable@vger.kernel.org> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: Convert cmd_time_out into backend device attributeNicholas Bellinger1-26/+68
Instead of putting cmd_time_out under ../target/core/user_0/foo/control, which has historically been used by parameters needed for initial backend device configuration, go ahead and move cmd_time_out into a backend device attribute. In order to do this, tcmu_module_init() has been updated to create a local struct configfs_attribute **tcmu_attrs, that is based upon the existing passthrough_attrib_attrs along with the new cmd_time_out attribute. Once **tcm_attrs has been setup, go ahead and point it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core. Also following MNC's previous change, ->cmd_time_out is stored in milliseconds but exposed via configfs in seconds. Also, note this patch restricts the modification of ->cmd_time_out to before + after the TCMU device has been configured, but not while it has active fabric exports. Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: make cmd timeout configurableMike Christie1-6/+35
A single daemon could implement multiple types of devices using multuple types of real devices that may not support restarting from crashes and/or handling tcmu timeouts. This makes the cmd timeout configurable, so handlers that do not support it can turn if off for now. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: add helper to check if dev was configuredMike Christie1-2/+6
This adds a helper to check if the dev was configured. It will be used in the next patch to prevent updates to some config settings after the device has been setup. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds4-3/+12
Pull OpenRISC fixes from Stafford Horne: "OpenRISC fixes for build issues that were exposed by kbuild robots after 4.11 merge. All from allmodconfig builds. This includes: - bug in the handling of 8-byte get_user() calls - module build failure due to multile missing symbol exports" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: Export symbols needed by modules openrisc: fix issue handling 8 byte get_user calls openrisc: xchg: fix `computed is not used` warning
2017-03-18target: fix race during implicit transition work flushesMike Christie1-9/+1
This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow userspace to set state to transitioningMike Christie1-15/+22
Userspace target_core_user handlers like tcmu-runner may want to set the ALUA state to transitioning while it does implicit transitions. This patch allows that state when set from configfs. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fix ALUA transition timeout handlingMike Christie2-16/+9
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Use system workqueue for ALUA transitionsMike Christie1-5/+3
If tcmu-runner is processing a STPG and needs to change the kernel's ALUA state then we cannot use the same work queue for task management requests and ALUA transitions, because we could deadlock. The problem occurs when a STPG times out before tcmu-runner is able to call into target_tg_pt_gp_alua_access_state_store-> core_alua_do_port_transition -> core_alua_do_transition_tg_pt -> queue_work. In this case, the tmr is on the work queue waiting for the STPG to complete, but the STPG transition is now queued behind the waiting tmr. Note: This bug will also be fixed by this patch: http://www.spinics.net/lists/target-devel/msg14560.html which switches the tmr code to use the system workqueues. For both, I am not sure if we need a dedicated workqueue since it is not a performance path and I do not think we need WQ_MEM_RECLAIM to make forward progress to free up memory like the block layer does. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fail ALUA transitions for pscsiMike Christie1-0/+3
We do not setup the LU group for pscsi devices, so if you write a state to alua_access_state that will cause a transition you will get a NULL pointer dereference. This patch will fail attempts to try and transition the path for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA flag. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow ALUA setup for some passthrough backendsMike Christie4-7/+15
This patch allows passthrough backends to use the core/base LIO ALUA setup and state checks, but still handle the execution of commands. This will allow the target_core_user module to execute STPG and RTPG in userspace, and not have to duplicate the ALUA state checks, path information (needed so we can check if command is executable on specific paths) and setup (rtslib sets/updates the configfs ALUA interface like it does for iblock or file). For STPG, the target_core_user userspace daemon, tcmu-runner will still execute the STPG, and to update the core/base LIO state it will use the existing configfs interface. For RTPG, tcmu-runner will loop over configfs and/or cache the state. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: return on first Opt parse failureMike Christie1-0/+3
We only were returing failure if the last opt to be parsed failed. This has a return failure when we first detect a failure. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: allow hw_max_sectors greater than 128Mike Christie1-19/+35
tcmu hard codes the hw_max_sectors to 128 which is a litle small. Userspace uses the max_sectors to report the optimal IO size and some initiators perform better with larger IOs (open-iscsi seems to do better with 256 to 512 depending on the test). (Fix do not display hw max sectors twice - MNC) Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Drop pointless tfo->check_stop_free checkNicholas Bellinger2-2/+5
All in-tree fabric drivers provide a tfo->check_stop_free(), so there is no need to do the extra check within existing transport_cmd_check_stop_to_fabric() code. Just to be sure, add a check in target_fabric_tf_ops_check() to notify any out-of-tree drivers that might be missing it. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18parisc: Fix system shutdown haltHelge Deller1-0/+2
On those parisc machines which don't provide a software power off function, the system currently kills the init process at the end of a shutdown and unexpectedly restarts insteads of halting. Fix it by adding a loop which will not return. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.9+
2017-03-18parisc: perf: Fix potential NULL pointer dereferenceArvind Yadav1-45/+49
Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-18Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds1-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fix from Thomas Gleixner: "A single fix preventing the concurrent execution of the CPU hotplug callback install/invocation machinery. Long standing bug caused by a massive brain slip of that Gleixner dude, which went unnoticed for almost a year" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Serialize callback invocations proper
2017-03-17Merge tag 'pm-4.11-rc3' of ↵Linus Torvalds2-36/+36
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a few more intel_pstate issues and one small issue in the cpufreq core. Specifics: - Fix breakage in the intel_pstate's debugfs interface for PID controller tuning (Rafael Wysocki) - Fix computations related to P-state limits in intel_pstate to avoid excessive rounding errors leading to visible inaccuracies (Srinivas Pandruvada, Rafael Wysocki) - Add a missing newline to a message printed by one function in the cpufreq core and clean up that function (Rafael Wysocki)" * tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Fix and clean up show_cpuinfo_cur_freq() cpufreq: intel_pstate: Avoid percentages in limits-related computations cpufreq: intel_pstate: Correct frequency setting in the HWP mode cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
2017-03-18Merge branches 'pm-cpufreq-fixes' and 'intel_pstate-fixes'Rafael J. Wysocki1-33/+31
* pm-cpufreq-fixes: cpufreq: Fix and clean up show_cpuinfo_cur_freq() * intel_pstate-fixes: cpufreq: intel_pstate: Avoid percentages in limits-related computations cpufreq: intel_pstate: Correct frequency setting in the HWP mode cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
2017-03-17Merge tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds13-27/+90
Pull NFS client fixes from Anna Schumaker: "We have a handful of stable fixes to fix kernel warnings and other bugs that have been around for a while. We've also found a few other reference counting bugs and memory leaks since the initial 4.11 pull. Stable Bugfixes: - Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings - Prevent a double free in async nfs4_exchange_id() - Squelch a kbuild sparse complaint for xprtrdma Other Bugfixes: - Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak - Fix a reference leak that causes kernel warnings - Make nfs4_cb_sv_ops static to fix a sparse warning - Respect a server's max size in CREATE_SESSION - Handle errors from nfs4_pnfs_ds_connect - Flexfiles layout shouldn't mark devices as unavailable" * tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: pNFS/flexfiles: never nfs4_mark_deviceid_unavailable pNFS: return status from nfs4_pnfs_ds_connect NFSv4.1 respect server's max size in CREATE_SESSION NFS prevent double free in async nfs4_exchange_id nfs: make nfs4_cb_sv_ops static xprtrdma: Squelch kbuild sparse complaint NFS: fix the fault nrequests decreasing for nfs_inode COPY NFSv4: fix a reference leak caused WARNING messages nfs4: fix a typo of NFS_ATTR_FATTR_GROUP_NAME
2017-03-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds11-24/+126
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "An assorted pile of fixes along with some hardware enablement: - a fix for a KASAN / branch profiling related boot failure - some more fallout of the PUD rework - a fix for the Always Running Timer which is not initialized when the TSC frequency is known at boot time (via MSR/CPUID) - a resource leak fix for the RDT filesystem - another unwinder corner case fixup - removal of the warning for duplicate NMI handlers because there are legitimate cases where more than one handler can be registered at the last level - make a function static - found by sparse - a set of updates for the Intel MID platform which got delayed due to merge ordering constraints. It's hardware enablement for a non mainstream platform, so there is no risk" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Make unnecessarily global function static x86/intel_rdt: Put group node in rdtgroup_kn_unlock x86/unwind: Fix last frame check for aligned function stacks mm, x86: Fix native_pud_clear build error x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y x86/platform/intel-mid: Add power button support for Merrifield x86/platform/intel-mid: Use common power off sequence x86/platform: Remove warning message for duplicate NMI handlers x86/tsc: Fix ART for TSC_KNOWN_FREQ x86/platform/intel-mid: Correct MSI IRQ line for watchdog device
2017-03-17Merge branch 'x86-acpi-for-linus' of ↵Linus Torvalds6-152/+79
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 acpi fixes from Thomas Gleixner: "This update deals with the fallout of the recent work to make cpuid/node mappings persistent. It turned out that the boot time ACPI based mapping tripped over ACPI inconsistencies and caused regressions. It's partially reverted and the fragile part replaced by an implementation which makes the mapping persistent when a CPU goes online for the first time" * 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: acpi/processor: Check for duplicate processor ids at hotplug time acpi/processor: Implement DEVICE operator for processor enumeration x86/acpi: Restore the order of CPU IDs Revert"x86/acpi: Enable MADT APIs to return disabled apicids" Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"
2017-03-17Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-19/+63
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of perf related fixes: - fix a CR4.PCE propagation issue caused by usage of mm instead of active_mm and therefore propagated the wrong value. - perf core fixes, which plug a use-after-free issue and make the event inheritance on fork more robust. - a tooling fix for symbol handling" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf symbols: Fix symbols__fixup_end heuristic for corner cases x86/perf: Clarify why x86_pmu_event_mapped() isn't racy x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm perf/core: Better explain the inherit magic perf/core: Simplify perf_event_free_task() perf/core: Fix event inheritance on fork() perf/core: Fix use-after-free in perf_release()
2017-03-17Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-14/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "From the scheduler departement: - a bunch of sched deadline related fixes which deal with various buglets and corner cases. - two fixes for the loadavg spikes which are caused by the delayed NOHZ accounting" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Use deadline instead of period when calculating overflow sched/deadline: Throttle a constrained deadline task activated after the deadline sched/deadline: Make sure the replenishment timer fires in the next period sched/loadavg: Use {READ,WRITE}_ONCE() for sample window sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting sched/deadline: Add missing update_rq_clock() in dl_task_timer()
2017-03-17Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds2-14/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three fixes related to locking: - fix a SIGKILL issue for RWSEM_GENERIC_SPINLOCK which has been fixed for the XCHGADD variant already - plug a potential use after free in the futex code - prevent leaking a held spinlock in an futex error handling code path" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y futex: Add missing error handling to FUTEX_REQUEUE_PI futex: Fix potential use-after-free in FUTEX_REQUEUE_PI
2017-03-17Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-15/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Just a simple revert of a new sched_clock implementation which turned out to be buggy" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock"
2017-03-17pNFS/flexfiles: never nfs4_mark_deviceid_unavailableWeston Andros Adamson4-10/+31
The flexfiles layout should never mark a device unavailable. Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call directly from files layout where it's still needed. The flexfiles driver still handles marked devices in error paths, but will now print a rate limited warning. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17pNFS: return status from nfs4_pnfs_ds_connectWeston Andros Adamson6-6/+48
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it can wait on another context to reach the same failure. This checks that the rpc_create succeeded and returns the error to the caller. When an error is returned, both the files and flexfiles layouts will return NULL from _prepare_ds(). The flexfiles layout will also return the layout with the error NFS4ERR_NXIO. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17NFSv4.1 respect server's max size in CREATE_SESSIONOlga Kornievskaia1-2/+2
Currently client doesn't respect max sizes server returns in CREATE_SESSION. nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0 so they never get set to the sizes returned by the server. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17NFS prevent double free in async nfs4_exchange_idOlga Kornievskaia1-5/+4
Since rpc_task is async, the release function should be called which will free the impl_id, scope, and owner. Trond pointed at 2 more problems: -- use of client pointer after free in the nfs4_exchangeid_release() function -- cl_count mismatch if rpc_run_task() isn't run Fixes: 8d89bd70bc9 ("NFS setup async exchange_id") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Cc: stable@vger.kernel.org # 4.9 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17nfs: make nfs4_cb_sv_ops staticJason Yan1-2/+2
Fixes the following sparse warning: fs/nfs/callback.c:235:21: warning: symbol 'nfs4_cb_sv_ops' was not declared. Should it be static? Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 22:00:19 +0000