summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2006-01-06NFSv4: Ensure change attribute returned by GETATTR callback conforms to specTrond Myklebust3-1/+5
According to RFC3530 we're supposed to cache the change attribute at the time the client receives a write delegation. If the inode is clean, a CB_GETATTR callback by the server to the client is supposed to return the cached change attribute. If, OTOH, the inode is dirty, the client should bump the cached change attribute by 1. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: Fix a potential race in rpc_pipefs.Trond Myklebust1-3/+6
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: Make directIO aware of compound pages...Trond Myklebust1-3/+4
...and avoid calling set_page_dirty on them Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: Make stat() return updated mtimes after a write()Trond Myklebust3-11/+15
The SuS states that a call to write() will cause mtime to be updated on the file. In order to satisfy that requirement, we need to flush out any cached writes in nfs_getattr(). Speed things up slightly by not committing the writes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Ensure that we return the delegation on the target of a rename too.Trond Myklebust1-1/+3
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: support large reads and writes on the wireChuck Lever8-53/+91
Most NFS server implementations allow up to 64KB reads and writes on the wire. The Solaris NFS server allows up to a megabyte, for instance. Now the Linux NFS client supports transfer sizes up to 1MB, too. This will help reduce protocol and context switch overhead on read/write intensive NFS workloads, and support larger atomic read and write operations on servers that support them. Test-plan: Connectathon and iozone on mount point with wsize=rsize>32768 over TCP. Tests with NFS over UDP to verify the maximum RPC payload size cap. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: make "inode number mismatch" message more usefulChuck Lever1-8/+9
To help NFS users and server developers, make the "inode number mismatch" message display more useful information. Test-plan: None. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: get rid of useless kernel log messageChuck Lever1-2/+1
nfs_statfs() generates a log message when GETATTR returns an error. This is usually a useless message. Make it a dprintk. Test plan: None Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: simplify inlined bit ops in nfs_page.hChuck Lever1-9/+3
Minor cleanup: inlined bit ops in nfs_page.h can be simpler. Test plan: Write-intensive workload against a server that requires COMMITs. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: Fix error recovery code in fs/nfs/inode.c:__init_nfs()Chuck Lever1-2/+2
Red Hat found a problem in the error recovery logic in __init_nfs. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: use generic_write_checks() to sanity check direct writesChuck Lever1-24/+19
Replace ad hoc write parameter sanity checking in nfs_file_direct_write() with a call to generic_write_checks(). This should make the proper checks modulo the O_LARGEFILE flag, and should catch NFSv2-specific limitations by virtue of i_sb->s_maxbytes. Test plan: Posix compliance testing with both NFSv2 and NFSv3. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Remove requirement for machine creds for the "setclientid" operationTrond Myklebust4-49/+52
Use a cred from the nfs4_client->cl_state_owners list. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Remove requirement for machine creds for the "renew" operationTrond Myklebust4-25/+41
In RFC3530, the RENEW operation is allowed to use either the same principal, RPC security flavour and (if RPCSEC_GSS), the same mechanism and service that was used for SETCLIENTID_CONFIRM OR Any principal, RPC security flavour and service combination that currently has an OPEN file on the server. Choose the latter since that doesn't require us to keep credentials for the same principal for the entire duration of the mount. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Send RENEW requests to the server only when we're holding stateTrond Myklebust5-2/+75
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: Convert instances of kernel_thread() to kthread()Trond Myklebust1-30/+16
Convert private implementations in NFSv4 state recovery and delegation code to use kthreads. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: State recovery cleanupTrond Myklebust3-25/+28
Use wait_on_bit() when waiting for state recovery to complete. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: OPEN/LOCK/LOCKU/CLOSE will automatically renew the NFSv4 leaseTrond Myklebust1-3/+31
Cut down on the number of unnecessary RENEW requests on the wire. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: Ensure that SIGKILL will always terminate a synchronous RPC call.Trond Myklebust2-4/+4
...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to interrupt RPC calls too (as per the Solaris implementation). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Make DELEGRETURN an interruptible operation.Trond Myklebust1-8/+60
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Convert LOCK rpc call into an asynchronous RPC callTrond Myklebust2-75/+175
In order to allow users to interrupt/cancel it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: locking XDR cleanupTrond Myklebust3-196/+179
Get rid of some unnecessary intermediate structures Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Make open recovery track O_RDWR, O_RDONLY and O_WRONLY correctlyTrond Myklebust2-131/+156
When recovering from a delegation recall or a network partition, we need to replay open(O_RDWR), open(O_RDONLY) and open(O_WRONLY) separately. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Make nfs4_state track O_RDWR, O_RDONLY and O_WRONLY separatelyTrond Myklebust3-28/+42
A closer reading of RFC3530 reveals that OPEN_DOWNGRADE must always specify a access modes that have been the argument of a previous OPEN operation. IOW: doing OPEN(O_RDWR) and then OPEN_DOWNGRADE(O_WRONLY) is forbidden unless the user called OPEN(O_WRONLY) In order to fix that, we really need to track the three possible open states separately. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Make open_confirm() asynchronous tooTrond Myklebust3-29/+81
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Convert open() into an asynchronous RPC callTrond Myklebust2-66/+130
OPEN is a stateful operation, so we must ensure that it always completes. In order to allow users to interrupt the operation, we need to make the RPC call asynchronous, and then wait on completion (or cancel). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: rpc_execute should not return task->tk_status;Trond Myklebust2-8/+7
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: Get rid of some unused exportsTrond Myklebust1-4/+0
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Allocate OPEN call RPC arguments using kmalloc()Trond Myklebust1-96/+117
Cleanup in preparation for making OPEN calls interruptible by the user. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: Make locku use the new RPC "wait on completion" interface.Trond Myklebust1-29/+36
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFSv4: stateful NFSv4 RPC call interfaceTrond Myklebust3-22/+78
The NFSv4 model requires us to complete all RPC calls that might establish state on the server whether or not the user wants to interrupt it. We may also need to schedule new work (including new RPC calls) in order to cancel the new state. The asynchronous RPC model will allow us to ensure that RPC calls always complete, but in order to allow for "synchronous" RPC, we want to add the ability to wait for completion. The waits are, of course, interruptible. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: Further cleanupsTrond Myklebust4-18/+27
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06RPC: Clean up RPC task structureTrond Myklebust18-185/+241
Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: Yet more RPC cleanupsTrond Myklebust4-40/+34
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06NFS: Work correctly with single-page ->writepage() callsTrond Myklebust1-11/+5
Ensure that we always initiate flushing of data before we exit a single-page ->writepage() call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06identify multipage ->writepages() callsAndrew Morton2-6/+13
NFS needs to be able to distinguish between single-page ->writepage() calls and multipage ->writepages() calls. For the single-page writepage calls NFS can kick off the I/O within the context of ->writepage(). For multipage ->writepages calls, nfs_writepage() will leave the I/O pending and nfs_writepages() will kick off the I/O when it all has been queued up within NFS. Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06Merge branch 'post-2.6.15' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds50-644/+695
Manual fixup for merge with Jens' "Suspend support for libata", commit ID 9b847548663ef1039dd49f0eb4463d001e596bc3. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06x86: remove bogus 'pci=usepirqmask' suggestion when no irq is definedLinus Torvalds1-1/+1
This was harmless, but for the case of a device that had no irq pre-defined we would incorrectly suggest that "usepirqmask" might make a difference. It never would, and the message was just confusing people. Reported in the dmesg of Etienne Lorrain. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] Suspend support for libataJens Axboe7-0/+181
This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: allow sync-speed to be controlled per-deviceNeilBrown3-5/+131
Also export current (average) speed and status in sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: support adding new devices to md arrays via sysfsNeilBrown2-0/+68
Writing major:minor to md/new_dev will bind that device to the array. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: allow available size of component devices to be set via sysfsNeilBrown2-0/+32
Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md-export-rdev-data_offset-via-sysfs-fixAndrew Morton1-1/+1
drivers/md/md.c: In function `offset_show': drivers/md/md.c:1670: warning: long long unsigned int format, different type arg (arg 3) Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: export rdev->data_offset via sysfsNeilBrown2-0/+29
Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: expose device slot information via sysfsNeilBrown2-0/+43
This the role that a device has in an array can be viewed and set. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: keep better track of dev/array size when assembling md arraysNeilBrown1-18/+23
Move the checks - that dev size is never less than array size - into bind_rdev_to_array to make sure it always happens properly (there is one place where currently it doesn't). Also reject any superblock which claims an array size smaller than the device in question can hold. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: allow md/raid_disks to be settableNeilBrown2-23/+54
If array is active, try to reshape, else just set the value. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: count corrected read errors per driveNeilBrown7-4/+57
Store this total in superblock (As appropriate), and make it available to userspace via sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: allow array level to be set textually via sysfsNeilBrown11-14/+67
Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: expose md metadata format in sysfsNeilBrown2-0/+55
Allow it to be set to a particular version, or 'none'. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: allow md array component size to be accessed and set via sysfsNeilBrown2-42/+98
Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 17:49:24 +0000