summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-04-16mac80211: remove warning from ieee80211_beacon_lossAlexander Bondar1-1/+0
Currently, mac80211 assumes that connection monitor offload for BSS station implies that the device: - sends periodic keep alive packets to associated AP - monitors missed beacons - actively probes the AP in case of missed beacons In case of poor connection conditions it expects the function ieee80211_connection_loss() to be called by driver. However, some devices implement connection monitor offload excluding active AP probing. To allow them to call ieee80211_beacon_loss() cleanly, remove the warning there and thus allow them to use mac80211 for the AP probing even if connection monitor offload is supported. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: handle wide bandwidth channel switchJohannes Berg1-17/+79
Parse and react to the wide bandwidth channel switch element in beacons/action frames. Finding the element was done in a previous patch (it has different positions in beacons/action frames), now handle it. If there's something wrong with it simply disconnect. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: parse VHT channel switch IEsJohannes Berg9-18/+63
VHT introduces multiple IEs that need to be parsed for a wide bandwidth channel switch. Two are (currently) needed in mac80211: * wide bandwidth channel switch element * channel switch wrapper element The former is contained in the latter for beacons and probe responses, but not for the spectrum management action frames so the IE parser needs a new argument to differentiate them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: handle extended channel switch announcementJohannes Berg3-4/+49
Handle the (public) extended channel switch announcement action frames. Parts of the data in these frames isn't really in IEs, but put it into the elems struct anyway to simplify the handling. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: support secondary channel offset in CSAJohannes Berg13-54/+125
Add support for the secondary channel offset IE in channel switch announcements. This is necessary for proper handling of CSA on HT access points. For this to work it is also necessary to convert everything here to use chandef structs instead of just channels. The driver updates aren't really correct though. In particular, the TI wl18xx driver update can't possibly be right since it just ignores the new channel width for lack of firmware API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: support extended channel switchJohannes Berg4-26/+71
Support extended channel switch when the operating class is one of the global operating classes as defined in Annex E of 802.11-2012. If it isn't, disconnect from the AP instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16cfg80211: add ieee80211_operating_class_to_bandJohannes Berg2-0/+31
This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: unify CSA action frame/beacon processingJohannes Berg4-39/+44
CSA action frame content should be processed as variable IEs rather than fixed to make it extensible. Unify the code and process them just like CSA in beacons to make it easier to extend for HT/VHT. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: use second center_freq segment only in 80+80Johannes Berg1-6/+4
The field is otherwise reserved, so we shouldn't read and reject it, though any sane system will probably have to set it to 0 anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16wireless: regulatory: fix channel disabling race conditionJohannes Berg1-1/+1
When a full scan 2.4 and 5 GHz scan is scheduled, but then the 2.4 GHz part of the scan disables a 5.2 GHz channel due to, e.g. receiving country or frequency information, that 5.2 GHz channel might already be in the list of channels to scan next. Then, when the driver checks if it should do a passive scan, that will return false and attempt an active scan. This is not only wrong but can also lead to the iwlwifi device firmware crashing since it checks regulatory as well. Fix this by not setting the channel flags to just disabled but rather OR'ing in the disabled flag. That way, even if the race happens, the channel will be scanned passively which is still (mostly) correct. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-11mac80211: always pick a basic rate to tx RTS/CTS for pre-HT ratesKarl Beldan1-4/+7
When the 1st rate control entry is a pre-HT rate we want to set rts_cts_rate_idx "as the fastest basic rate that is not faster than the data rate"(code comments). But in case some bss allowed rate indexes are lower than the lowest bss basic rate, if the rate control selects a rate among the formers for its 1st rate control entry, rts_cts_rate_idx remains 0 and is not a basic rate index. This commit sets rts_cts_rate_idx to the lowest bss basic rate index in this situation. Note that the code assumes that lowest indexes == lowest bitrates. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-11mac80211: fix ieee80211_queue_stopped()Thomas Pedersen1-1/+2
Johannes Berg notes mac80211 drivers which use ieee80211_queue_stopped() really only want to know if they previously requested a queue stop. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: provide SSID in IBSS modeMarek Puzyniak2-2/+6
Some drivers need SSID in AP and IBSS mode. AP SSID is provided through BSS_CHANGED_SSID notification. There was no easy way to do the same for IBSS. In IBSS mode SSID is known but was not stored in BSS configuration. Extend the AP-mode functionality to also work in IBSS mode. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: always advertise STBC/MCSes even if no AP supportJohannes Berg1-32/+0
Advertise STBC capabilities and MCS rates even if the AP doesn't support them. This has always been the right thing to do, but used to be problematic with some APs. Now WFA testing requires this so re-enable it, problematic APs would then presumably not pass the test and be fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: clear SSID when stopping APMarek Puzyniak1-0/+1
When AP interface is stopped ssid_len in the BSS configuration isn't cleared which can confuse drivers when switching modes. Set the length to zero when stopping the AP interface. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: fix recalc_radar hwconf sync problemSimon Wunderlich1-10/+33
local->hw.conf maybe not be synced when recalcing whether radar is enabled, sometimes leaving radar enabled even if it's not neccesary anymore. Fix this by: * setting radar_enabled when creating the chanctx * turning radar_enabled off before destroying the last channel context Reported-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: stringify another plink stateThomas Pedersen1-2/+2
The patch "mac80211: stringify mesh peering events" missed an opportunity to print the peering state as a string. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211: unset FC retry bit in mesh fwding pathThomas Pedersen1-0/+1
Otherwise forwarded frames would keep the retry bit set from the previous link transmission. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10mac80211_hwsim: Register and bind to driverMartin Pitt1-5/+26
Properly register our mac80211_hwsim_driver, attach it to the platform bus. Bind newly created hwsim devices to that driver, so that our wlan devices get a proper "driver" sysfs attribute. This makes mac80211_hwsim interfaces work with NetworkManager. Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> [fix an old and a new message to not be line-broken, also fix the driver_register error path] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: make ieee802_11_parse_elems an inlineJohannes Berg2-8/+6
This (slightly) reduces the code size. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: don't start new netdev queues if driver stoppedJohannes Berg1-2/+22
If a new netdev (e.g. an AP VLAN) is created while the driver has queues stopped, the new netdev queues will be started even though they shouldn't. This will lead to frames accumulating on the internal mac80211 pending queues instead of properly being held on the netdev queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: replace some dead code by a warningJohannes Berg1-1/+2
Given the (nested) switch statements, this code can't be reached, so make it warn instead of manipulating the carrier state which seems purposeful. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: don't fiddle with netdev queues in MLME codeJohannes Berg1-24/+2
The netdev queues should always represent the state that the driver gave them, so fiddling with them isn't really appropriate in the mlme code. Also, since we stop queues for flushing now, this really isn't necessary any more. As the scan/offchannel code has also been modified to no longer do this a while ago, remove the outdated smp_mb() and comments about it. While at it, also add a pair of braces that was missing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: disable uAPSD if all ACs are under ACMAlexander Bondar1-1/+2
It's unlikely that an AP requires WMM mandatory admission control for all access categories, and if it does then we still transmit on the background AC without requesting admission. However, avoid using uAPSD in this case since the implementation could run into issues and might use other ACs etc. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: fix do_stop handling while suspendedJohannes Berg1-25/+49
When a device is unplugged while suspended, mac80211 is de-initialized and all interfaces are removed while no state is actually present in the driver. This can cause warnings and driver confusion. Fix this by reordering the do_stop code to not call the driver when it is suspended, i.e. when there's no state in the driver anyway. The previous patches removed a few corner cases in ROC and virtual monitor interfaces so that now this is safe to do and no state should be left over. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: destroy virtual monitor interface across suspendJohannes Berg4-6/+11
It has to be removed from the driver, but completely destroying it helps handle unplug of a device during suspend since then the channel context handling etc. doesn't have to happen later when it's removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: purge remain-on-channel items when suspendingJohannes Berg4-5/+8
They can't really be executed while suspended and could trigger work warnings, so abort all ROC items. When the system resumes the notifications about this will be delivered to userspace which can then act accordingly (though it will assume they were canceled/finished.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: remove outdated comment referring to master interfaceJohannes Berg1-6/+1
The code now explicitly calls ieee80211_configure_filter() anyway, so nothing needs to be explained. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: return new mpath from mesh_path_add()Bob Copeland4-51/+42
Most times that mesh_path_add() is called, it is followed by a lookup to get the just-added mpath. We can instead just return the new mpath in the case that we allocated one (or the existing one if already there), so do that. Also, reorder the code in mesh_path_add a bit so that we don't need to allocate in the pre-existing case. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: fix the PREP mesh hwmp debug messageChun-Yeow Yeoh1-2/+2
The mesh hwmp debug message is a bit confusing. The "sending PREP to %p" should be the MAC address of mesh STA that has originated the PREQ message and the "received PREP from %pM" should be the MAC address of the mesh STA that has originated the PREP message. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: parse Timeout Interval Element using a structJohannes Berg4-7/+18
Instead of open-coding the accesses and length check do the length check in the IE parser and assign a struct pointer for use in the remaining code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: check ERP info IE length in parserJohannes Berg4-7/+7
It's always just one byte, so check for that and remove the length field from the parser struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: check DSSS params IE length in parserJohannes Berg5-6/+7
It's always just one byte, so check for that and remove the length field from the parser struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: remove unused IE pointers from parserJohannes Berg2-28/+0
There's no need to parse IEs that aren't used so just remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: remove ancient reference to master interfaceJohannes Berg1-1/+1
The master interface no longer exists ... and hasn't for a few years now, so remove this reference :-) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: be more careful about sending beacon-loss-eventsBen Greear1-3/+5
I don't think we should send the events unless it was actually a beacon that was lost...not just any probe of an AP. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: add beacon stats to debugfsBen Greear2-0/+13
Beacon-timeout and number of beacon loss events. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211_hwsim: advertise VHT support also when channels == 1Karl Beldan1-3/+0
Drivers can now advertise VHT support even if they don't use channel contexts. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: let drivers not supporting channel contexts use VHTKarl Beldan1-13/+1
It is possible since the global hw config and local switched to cfg80211_chan_def. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan70-244/+293
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25mac80211: allow drivers to set default uAPSD parametersAlexander Bondar3-2/+17
mac80211 currently sets uAPSD parameters to have VO AC trigger- and delivery-enabled, with maximum service period length. Allow drivers to change these default settings since different uAPSD client implementations may handle errors differently and be able to recover from some errors. Note: some APs may not function correctly if one or all ACs are trigger- and delivery-enabled, see http://thread.gmane.org/gmane.linux.kernel.wireless.general/93577. We retested with this AP and later firmware doesn't have this bug any more. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25mac80211: ibss: use beacon_data struct for beacon and probe responseJohannes Berg3-71/+70
Instead of having an SKB all the time, use a beacon_data struct with just the information required. This also allows removing a synchronize_rcu() and using kfree_rcu() instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25mac80211: ibss: disable beaconing before freeing beaconJohannes Berg1-9/+12
If we don't disable beaconing, the driver might attempt to continue, but would fail to request a beacon. That's strange, so disable beaconing first. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25cfg80211: Document update_ft_ies() cfg80211_opsJouni Malinen1-0/+4
This was forgotten from the commit that added support for FT operations with drivers that implement SME. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-22mac80211: add P2P NoA settingsJanusz Dziedzic6-37/+57
Add P2P NoA settings for STA mode. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [fix docs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-22mac80211: use ieee80211_p2p_noa_attr structureJanusz Dziedzic1-11/+15
Use ieee80211_p2p_noa_attr structure during P2P_PS (oppps) detection. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-22cfg80211: add P2P Notice of Absence attributeJanusz Dziedzic1-0/+20
Add P2P Notice of Absence attribute structure. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-22mac80211: make beacon-loss-count configurableBen Greear1-3/+7
On loaded systems with lots of VIFs, I see lots of beacon timeouts, even though the connection to the AP is very good. Allow tuning the beacon-loss-count variable to give the system longer to process beacons if the user prefers. Signed-off-by: Ben Greear <greearb@candelatech.com> [add the number of beacons to the message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20mac80211: return the RSSI in dBmEmmanuel Grumbach1-1/+1
For the sake of speed of calculation and number accuracy, mac80211 tracks the RSSI in dBm * 16. But it forgot to divide back by 16 when the RSSI is asked by the driver. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20cfg80211: fix error return code in cfg80211_init()Wei Yongjun1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 05:27:48 +0000