summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-02-10Do not account for the address space used by hugetlbfs using VM_ACCOUNTMel Gorman8-43/+65
When overcommit is disabled, the core VM accounts for pages used by anonymous shared, private mappings and special mappings. It keeps track of VMAs that should be accounted for with VM_ACCOUNT and VMAs that never had a reserve with VM_NORESERVE. Overcommit for hugetlbfs is much riskier than overcommit for base pages due to contiguity requirements. It avoids overcommiting on both shared and private mappings using reservation counters that are checked and updated during mmap(). This ensures (within limits) that hugepages exist in the future when faults occurs or it is too easy to applications to be SIGKILLed. As hugetlbfs makes its own reservations of a different unit to the base page size, VM_ACCOUNT should never be set. Even if the units were correct, we would double account for the usage in the core VM and hugetlbfs. VM_NORESERVE may be set because an application can request no reserves be made for hugetlbfs at the risk of getting killed later. With commit fc8744adc870a8d4366908221508bb113d8b72ee, VM_NORESERVE and VM_ACCOUNT are getting unconditionally set for hugetlbfs-backed mappings. This breaks the accounting for both the core VM and hugetlbfs, can trigger an OOM storm when hugepage pools are too small lockups and corrupted counters otherwise are used. This patch brings hugetlbfs more in line with how the core VM treats VM_NORESERVE but prevents VM_ACCOUNT being set. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds3-26/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: don't use spin_is_contended
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds12-105/+117
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Storage: Update unusual_devs entry for Datafab KECF-USB USB: Correct Makefile to make isp1760 buildable USB: option: New mobile broadband modems to be supported USB: two more usb ids for ti_usb_3410_5052 USB: ftdi_sio: unlock_kernel() on error in set_serial_info() USB: usb-storage: add Pentax to the bad-vendor list USB: ftdi_sio: add support for the NDI Polaris system USB: usb-serial: fix the aircable_init failure path USB: usb-storage: remove WARN from last-sector hacks Revert USB: option: add Pantech cards USB: cdc-acm.c: remove duplicate lines for MTK gps support USB: fsl_qe_udc: Fix stalled TX requests bug USB: fsl_qe_udc: Fix muram corruption by disabled endpoints USB: fsl_qe_udc: Fix disconnects reporting during bus reset USB: fsl_qe_udc: Fix QE USB controller initialization USB: fsl_qe_udc: Fix recursive locking bug in ch9getstatus() USB: fsl_qe_udc: Fix oops on QE UDC probe failure
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds7-973/+3903
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: panel: fix lcd panel driver build failure Staging: android: fix up units in timed_gpio Staging: android: ram_console: Disable ECC when early init is enabled and validate buffer size Staging: at76_usb: Add support for OQO Model 01+ Staging: at76_usb: fix bugs introduced by "Staging: at76_usb: cleanup dma on stack issues" Revert Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 port
2009-02-09Merge branch 'fixes' of ↵Linus Torvalds2-28/+47
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Get transition latency from ACPI _PSS table [CPUFREQ] Make ignore_nice_load setting of ondemand work as expected.
2009-02-09Btrfs: don't use spin_is_contendedChris Mason3-26/+1
Btrfs was using spin_is_contended to see if it should drop locks before doing extent allocations during btrfs_search_slot. The idea was to avoid expensive searches in the tree unless the lock was actually contended. But, spin_is_contended is specific to the ticket spinlocks on x86, so this is causing compile errors everywhere else. In practice, the contention could easily appear some time after we started doing the extent allocation, and it makes more sense to always drop the lock instead. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-09Staging: panel: fix lcd panel driver build failureSachin P. Sant1-5/+5
* Fix build break for lcd panel driver. Signed-off-by : Sachin Sant <sachinp@in.ibm.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: android: fix up units in timed_gpioGreg Kroah-Hartman1-1/+1
The last build fix I did messed up the units of the sysfs file. This puts them back to be milliseconds, like they originally were. Thanks to Juha Motorsportcom for pointing this out. Reported-by: Juha Motorsportcom <juha_motorsportcom@luukku.com> Cc: Mike Lockwood <lockwood@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: android: ram_console: Disable ECC when early init is enabled and ↵Arve Hjønnevåg2-0/+15
validate buffer size Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: at76_usb: Add support for OQO Model 01+Jamie Lentin1-0/+2
Add USB device ID for OQO 01+'s internal wireless LAN An OQO employee mentions the chip's true identity here:- ftp://ftp.oqo.com/unsupported/linux/OQOLinux.html Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: at76_usb: fix bugs introduced by "Staging: at76_usb: cleanup dma on ↵Jason Andryuk1-2/+2
stack issues" Tracking down the firmware loading problem led to this commit. $ git bisect bad 0d1d1424330cc1934f2b2742f0cfa2c31e6a250b is first bad commit commit 0d1d1424330cc1934f2b2742f0cfa2c31e6a250b Author: Oliver Neukum <oliver@neukum.org> Date: Thu Dec 18 13:16:40 2008 +0100 Staging: at76_usb: cleanup dma on stack issues - no DMA on stack - cleanup unclear endianness issue Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> :040000 040000 c4fee9ea0fef25926229d810d19dc2f89cca9401 8b165a35d16280d2413b2700a6080ef290ca1009 M drivers The "no DMA on stack" conversion was incomplete with respect to updating the arguments passed to usb_control_msg. The value 40 is hardcoded as it was prior to conversion. The driver can now load firmware, but is not fully functional. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Revert Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 portGreg Kroah-Hartman3-965/+3878
Reverts 02227c28391b5059a7710d6039c52912b0ee2c1d (Had to be done by hand due to other patches that had come after this.) Turns out that we don't want the mac80211 port of this driver just yet, as there is a different driver working on adding this support. So keep things old and different for now. This is being reverted at the request of the linux-wireless developers. Cc: Kalle Valo <kalle.valo@iki.fi> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: Storage: Update unusual_devs entry for Datafab KECF-USBNick Holloway1-1/+1
This device suffers from the off-by-one error when reporting the capacity, so add US_FL_FIX_CAPACITY to the existing entry. Signed-off-by: Nick Holloway <Nick.Holloway@pyrites.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: Correct Makefile to make isp1760 buildableIvan Kuten1-0/+1
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: option: New mobile broadband modems to be supportedDirk De Schepper1-28/+56
- New Novatel and Dell mobile broadband modem products added - Dell pid variables used in stead of numerical PIDs for known products Signed-off-by: Dirk De Schepper <ddeschepper@nvtl.com> Cc: stable <stable@kernel.org> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: two more usb ids for ti_usb_3410_5052Oliver Neukum2-3/+9
This patch adds device IDs and balances the counts to make the hot ID additioning mechanism work. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Cc: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: ftdi_sio: unlock_kernel() on error in set_serial_info()Dan Carpenter1-1/+3
There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-storage: add Pentax to the bad-vendor listAlan Stern2-15/+2
This patch (as1202) adds Pentax to usb-storage's list of bad vendors whose devices always need the CAPACITY_HEURISTICS flag. This is in addition to the existing entries: Nokia, Nikon, and Motorola. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Virgo Pärna <virgo.parna@mail.ee> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: ftdi_sio: add support for the NDI Polaris systemStephane Clerambault2-0/+4
Add support for the NDI Polaris system *http://www.ndigital.com/). Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-serial: fix the aircable_init failure pathDave Young1-2/+2
The failure path of aircable_init is wrong, fix the order of (goto) labels. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Naranjo Manuel Francisco <naranjo.manuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-storage: remove WARN from last-sector hacksAlan Stern1-33/+3
This patch (as1201) removes the WARN() from the last-sector hacks in usb-storage, thereby making the code match the version now in .27-stable and .28-stable. The WARN() isn't needed, since there is no longer any intention of assuming that all storage devices have an even number of sectors, and it annoys users for no good reason. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Revert USB: option: add Pantech cardsGreg Kroah-Hartman1-9/+0
Revert 8b6346ec899713a90890c9e832f7eff91ea73504 as these devices really work just fine with the cdc-acm driver, as they follow the spec properly. Thanks to Chuck Ebbert for pointing out the problem here. Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: cdc-acm.c: remove duplicate lines for MTK gps supportJames Treacy1-3/+0
The same patch to add support for MTK gps loggers was submitted by two different people and applied twice. Remove the redundant lines. Signed-off-by: James Treacy <treacy@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix stalled TX requests bugAnton Vorontsov1-0/+1
While disabling an endpoint the driver nuking any pending requests, thus completing them with -ESHUTDOWN status. But the driver doesn't clear the tx_req, which means that a next TX request (after ep_enable), might get stalled, since the driver won't queue the new reqests. This patch fixes a bug I'm observing with ethernet gadget while playing with ifconfig usb0 up/down (the up/down sequence disables and enables `in' and `out' endpoints). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix muram corruption by disabled endpointsAnton Vorontsov1-0/+1
Before freeing an endpoint's muram memory, we should stop all activity of the endpoint, otherwise the QE UDC controller might do nasty things with the muram memory that isn't belong to that endpoint anymore. The qe_ep_reset() effectively flushes the hardware fifos, finishes all late transaction and thus prevents the corruption. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix disconnects reporting during bus resetAnton Vorontsov1-0/+3
Freescale QE UDC controllers can't report the "port change" states, so the only way to handle disconnects is to process bus reset interrupts. The bus reset can take some time, that is, few irqs. Gadgets may print the disconnection events, and this causes few repetitive messages in the kernel log. This patch fixes the issue by using the usb_state machine, if the usb controller has been already reset, just quit the reset irq early. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix QE USB controller initializationAnton Vorontsov1-1/+5
qe_udc_reg_init() leaves the USB controller enabled before muram memory initialized. Sometimes the uninitialized muram memory confuses the controller, and it start sending the busy interrupts. Fix this by disabling the controller, it will be enabled later by the gadget driver, at bind time. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix recursive locking bug in ch9getstatus()Anton Vorontsov1-8/+18
The call chain is this: qe_udc_irq() <- grabs the udc->lock spinlock rx_irq() qe_ep0_rx() ep0_setup_handle() setup_received_handle() ch9getstatus() qe_ep_queue() <- tries to grab the udc->lock again It seems unsafe to temporarily drop the lock in the ch9getstatus(), so to fix that bug the lock-less __qe_ep_queue() function implemented and used by the ch9getstatus(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix oops on QE UDC probe failureAnton Vorontsov1-1/+8
In case of probing errors the driver kfrees the udc_controller, but it doesn't set the pointer to NULL. When usb_gadget_register_driver is called, it checks for udc_controller != NULL, the check passes and the driver accesses nonexistent memory. Fix this by setting udc_controller to NULL in case of errors. While at it, also implement irq_of_parse_and_map()'s failure and cleanup cases. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+5
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: lockd: fix regression in lockd's handling of blocked locks
2009-02-09lockd: fix regression in lockd's handling of blocked locksJ. Bruce Fields1-1/+5
If a client requests a blocking lock, is denied, then requests it again, then here in nlmsvc_lock() we will call vfs_lock_file() without FL_SLEEP set, because we've already queued a block and don't need the locks code to do it again. But that means vfs_lock_file() will return -EAGAIN instead of FILE_LOCK_DENIED. So we still need to translate that -EAGAIN return into a nlm_lck_blocked error in this case, and put ourselves back on lockd's block list. The bug was introduced by bde74e4bc64415b1 "locks: add special return value for asynchronous locks". Thanks to Frank van Maarseveen for the report; his original test case was essentially for i in `seq 30`; do flock /nfsmount/foo sleep 10 & done Tested-by: Frank van Maarseveen <frankvm@frankvm.com> Reported-by: Frank van Maarseveen <frankvm@frankvm.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-02-09i915: Fix more size_t format string warningsLinus Torvalds1-1/+1
The DRI people seem to have a hard time getting these right (see also commit aeb565dfc3ac4c8b47c5049085b4c7bfb2c7d5d7). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09Merge branch 'drm-fixes' of ↵Linus Torvalds18-193/+1428
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: select framebuffer support automatically drm/i915: add get_vblank_counter function for GM45 drm/i915: capture last_vblank count at IRQ uninstall time too drm/i915: Unlock mutex on i915_gem_fault() error path drm/i915: Quiet the message on get/setparam ioctl with an unknown value. drm/i915: skip LVDS initialization on Apple Mac Mini drm/i915: sync SDVO code with stable userland modesetting driver drm/i915: Unref the object after failing to set tiling mode. drm/i915: add fence register management to execbuf drm/i915: Return error from i915_gem_object_get_fence_reg() when failing. drm/i915: Set up an MTRR covering the GTT at driver load. drm/i915: Skip SDVO/HDMI init when the chipset tells us it's not present. drm/i915: Suppress GEM teardown on X Server exit in KMS mode. drm/radeon: fix ioremap conflict with AGP mappings i915: fix unneeded locking in i915 LVDS get modes code.
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds6-15/+30
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: scatterwalk - Avoid flush_dcache_page on slab pages crypto: shash - Fix tfm destruction crypto: api - Fix zeroing on free crypto: shash - Fix module refcount crypto: api - Fix algorithm test race that broke aead initialisation
2009-02-09FRV: in_interrupt() requires #inclusion of linux/hardirq.h not asm/hardirq.h nowDavid Howells1-1/+1
in_interrupt() requires #inclusion of linux/hardirq.h not asm/hardirq.h now. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09x86: spinlocks: define dummy __raw_spin_is_contendedKyle McMartin4-0/+8
Architectures other than mips and x86 are not using ticket spinlocks. Therefore, the contention on the lock is meaningless, since there is nobody known to be waiting on it (arguably /fairly/ unfair locks). Dummy it out to return 0 on other architectures. Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09crypto: scatterwalk - Avoid flush_dcache_page on slab pagesHerbert Xu1-1/+2
It's illegal to call flush_dcache_page on slab pages on a number of architectures. So this patch avoids doing so if PageSlab is true. In future we can move the flush_dcache_page call to those page cache users that actually need it. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-08mm: fix error case in mlock downgrade reversionHugh Dickins1-1/+4
Commit 27421e211a39784694b597dbf35848b88363c248, Manually revert "mlock: downgrade mmap sem while populating mlocked regions", has introduced its own regression: __mlock_vma_pages_range() may report an error (for example, -EFAULT from trying to lock down pages from beyond EOF), but mlock_vma_pages_range() must hide that from its callers as before. Reported-by: Sami Farin <safari-kernel@safari.iki.fi> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-08Linux 2.6.29-rc4v2.6.29-rc4Linus Torvalds1-1/+1
2009-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-updateLinus Torvalds3-18/+76
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-update: async: use list_move_tail async: Rename _special -> _domain for clarity. async: Add some documentation. async: Handle kthread_run() return codes. async: Fix running list handling.
2009-02-08radeonfb: Fix resume from D3Cold on some platformsBenjamin Herrenschmidt2-67/+20
For historical reason, this driver used its own saving/restoring of the PCI config space, and used the state of it on resume as an indication as to whether it needed to re-POST the chip or not. This methods breaks with the later core changes since the core will have restored things for us. This patch fixes it by removing that custom code, using standard core methods to save/restore state, and testing for the need to re-POST by comparing the content of a few key PLL registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-08aty128fb: Properly save PCI state before changing PCI PM levelBenjamin Herrenschmidt1-10/+15
This fixes aty128fb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also replaced the hand-coded switch to D2 with a call to the genericc pci_set_power_state() and removed the code that switches it back to D0 since the generic code is doing that for us nowadays. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-08atyfb: Properly save PCI state before changing PCI PM levelBenjamin Herrenschmidt1-5/+15
This fixes atyfb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also slightly cleaned up the code that checks whether we are running on a PowerMac to do a runtime check instead of a compile check only, and replaced a deprecated number with the proper symbolic constant. Finally, I removed the useless switch to D0 from resume since the core does it for us. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-08async: use list_move_tailStefan Richter1-2/+1
list.h provides a dedicated primitive for "list_del followed by list_add_tail"... list_move_tail. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-08async: Rename _special -> _domain for clarity.Cornelia Huck3-24/+29
Rename the async_*_special() functions to async_*_domain(), which describes the purpose of these functions much better. [Broke up long lines to silence checkpatch] Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-08async: Add some documentation.Cornelia Huck1-0/+47
Add some kerneldoc to the async interface. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-08async: Handle kthread_run() return codes.Cornelia Huck1-2/+9
If we fail to create the manager thread, fall back to non-fastboot. If we fail to create an async thread, try again after waiting for a bit. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-08async: Fix running list handling.Cornelia Huck1-2/+2
async_schedule() should pass in async_running as the running list, and run_one_entry() should put the entry to be run on the provided running list instead of always on the generic one. Reported-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-08drm/i915: select framebuffer support automaticallyIngo Molnar2-3/+5
Migration helper. The i915 driver recently added a 'depends on FB' rule to its Kconfig entry - which silently turns off DRM_I915 if someone has a working config but no CONFIG_FB selected, and upgrades to the latest upstream kernel. Norbert Preining reported this problem: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12599 Subject : dri /dev node disappeared with 2.6.29-rc1 So change it to "select FB", which auto-selects framebuffer support. This way the driver keeps working, regardless of whether FB was enabled before or not. Kconfig select's of interactive options can be problematic to dependencies and can cause build breakages - but in this case it's safe because it's a leaf entry with no dependencies of its own. ( There is some minor circular dependency fallout as FB_I810 and FB_INTEL also used 'depends on FB' constructs - update those to "select FB" too. ) Reported-by: Norbert Preining <preining@logic.at> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-08drm/i915: add get_vblank_counter function for GM45Jesse Barnes5-1/+24
As discussed in the long thread about vblank related timeouts, it turns out GM45 has different frame count registers than previous chips. This patch adds support for them, which prevents us from waiting on really stale sequence values in drm_wait_vblank (which rather than returning immediately ends up timing out or getting interrupted). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 11:04:12 +0000