summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-06-04net: check for refcount if pop a stacked dst_entrySteffen Klassert2-5/+5
xfrm triggers a warning if dst_pop() drops a refcount on a noref dst. This patch changes dst_pop() to skb_dst_pop(). skb_dst_pop() drops the refcnt only on a refcounted dst. Also we don't clone the child dst_entry, so it is not refcounted and we can use skb_dst_set_noref() in xfrm_output_one(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03Merge branch 'master' of ↵David S. Miller3-18/+18
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-06-03ixgbe: return IXGBE_ERR_RAR_INDEX when out of rangeJeff Kirsher2-0/+3
Based on original patch from Shirley Ma <xma@us.ibm.com> Return IXGBE_ERR_RAR_INDEX when RAR index is out of range, instead of returning IXGBE_SUCCESS. CC: Shirley Ma <xma@us.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03act_pedit: access skb->data safelyChangli Gao1-10/+14
access skb->data safely we should use skb_header_pointer() and skb_store_bits() to access skb->data to handle small or non-linear skbs. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/sched/act_pedit.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03sfc: Store port number in net_device::dev_idBen Hutchings2-4/+2
This exposes the port number to userland through sysfs. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIANRoland Dreier1-3/+4
Probably no one has used this driver on big-endian systems, since it was setting up descriptor swapping if CONFIG_BIG_ENDIAN is set, which it never is, since that symbol is not mentioned anywhere else in the kernel source. Switch this test to a check for __BIG_ENDIAN so it has a chance at working. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03tehuti: return -EFAULT on copy_to_user errorsDan Carpenter1-2/+2
copy_to_user() returns the number of bytes remaining but we want to return a negative error code here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03isdn/kcapi: return -EFAULT on copy_from_user errorsDan Carpenter1-3/+3
copy_from_user() returns the number of bytes remaining but we should return -EFAULT here. The error code gets returned to the user. Both old_capi_manufacturer() and capi20_manufacturer() had other places that already returned -EFAULT so this won't break anything. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03e1000e: change logical negate to bitwiseDan Carpenter1-1/+1
The bitwise negate is intended here. With the logical negate the condition is always false. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03sfc: Get port number from CS_PORT_NUM, not PCI function numberBen Hutchings2-1/+7
A single shared memory region used to communicate with firmware is mapped into both PCI PFs of the SFC9020 and SFL9021. Drivers must be able to identify which port they are addressing in order to use the correct sub-region. Currently we use the PCI function number, but the PCI address may be virtualised. Use the CS_PORT_NUM register field defined for just this purpose. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02cls_u32: use skb_header_pointer() to dereference data safelyChangli Gao1-13/+36
use skb_header_pointer() to dereference data safely the original skb->data dereference isn't safe, as there isn't any skb->len or skb_is_nonlinear() check. skb_header_pointer() is used instead in this patch. And when the skb isn't long enough, we terminate the function u32_classify() immediately with -1. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02TCP: tcp_hybla: Fix integer overflow in slow start incrementDaniele Lacamera1-2/+2
For large values of rtt, 2^rho operation may overflow u32. Clamp down the increment to 2^16. Signed-off-by: Daniele Lacamera <root@danielinux.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02act_nat: fix the wrong checksum when addr isn't in old_addr/maskChangli Gao1-0/+4
fix the wrong checksum when addr isn't in old_addr/mask For TCP and UDP packets, when addr isn't in old_addr/mask we don't do SNAT or DNAT, and we should not update layer 4 checksum. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/sched/act_nat.c | 4 ++++ 1 file changed, 4 insertions(+) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02net/fec: fix pm to survive to suspend/resumeEric Bénard1-8/+8
* in the actual driver, calling fec_stop and fec_enet_init doesn't allow to have a working network interface at resume (where a ifconfig down and up is required to recover the interface) * by using fec_enet_close and fec_enet_open, this patch solves this problem and handle the case where the link changed between suspend and resume * this patch also disable clock at suspend and reenable it at resume Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: count RX DMA OVR as rx_fifo_errorPhil Sutter1-1/+1
This way, RX DMA overruns (actually being caused by overrun of the 512byte input FIFO) show up in ifconfig output. The rx_fifo_errors counter is unused otherwise. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: use netdev_alloc_skb_ip_align() here, tooPhil Sutter1-2/+1
This patch completes commit 89d71a66c40d629e3b1285def543ab1425558cd5 which missed this spot, as it seems. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: fix deadlock on RX FIFO overrunPhil Sutter1-14/+13
By calling korina_restart(), the IRQ handler tries to disable the interrupt it's currently serving. This leads to a deadlock since disable_irq() waits for any running IRQ handlers to finish before returning. This patch addresses the issue by turning korina_restart() into a workqueue task, which is then scheduled when needed. Reproducing the deadlock is easily done using e.g. GNU netcat to send large amounts of UDP data to the host running this driver. Note that the same problem (and fix) applies to TX FIFO underruns, but apparently these are less easy to trigger. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02net: fix conflict between null_or_orig and null_or_bondJohn Fastabend1-4/+4
If a skb is received on an inactive bond that does not meet the special cases checked for by skb_bond_should_drop it should only be delivered to exact matches as the comment in netif_receive_skb() says. However because null_or_bond could also be null this is not always true. This patch renames null_or_bond to orig_or_bond and initializes it to orig_dev. This keeps the intent of null_or_bond to pass frames received on VLAN interfaces stacked on bonding interfaces without invalidating the statement for null_or_orig. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02net: init_vlan should not copy slave or master flagsJohn Fastabend1-1/+2
The vlan device should not copy the slave or master flags from the real device. It is not in the bond until added nor is it a master. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02enic: bug fix: make the set/get netlink VF_PORT support symmetricalScott Feldman2-103/+104
To make get/set netlink VF_PORT truly symmetrical, we need to keep track of what items are set and only return those items on get. Previously, the driver wasn't differentiating between a set of attr with a NULL string, for example, and not setting the attr at all. We only want to return the NULL string if the attr was actually set with a NULL string. Otherwise, don't return the attr. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02bnx2: Fix hang during rmmod bnx2.Michael Chan1-1/+13
The regression is caused by: commit 4327ba435a56ada13eedf3eb332e583c7a0586a9 bnx2: Fix netpoll crash. If ->open() and ->close() are called multiple times, the same napi structs will be added to dev->napi_list multiple times, corrupting the dev->napi_list. This causes free_netdev() to hang during rmmod. We fix this by calling netif_napi_del() during ->close(). Also, bnx2_init_napi() must not be in the __devinit section since it is called by ->open(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02xfrm: force a dst reference in __xfrm_route_forward()Eric Dumazet1-0/+1
Packets going through __xfrm_route_forward() have a not refcounted dst entry, since we enabled a noref forwarding path. xfrm_lookup() might incorrectly release this dst entry. It's a bit late to make invasive changes in xfrm_lookup(), so lets force a refcount in this path. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01mac80211: fix dialog token allocatorJohannes Berg1-2/+4
The dialog token allocator has apparently been broken since b83f4e15 ("mac80211: fix deadlock in sta->lock") because it got moved out under the spinlock. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-01mac80211: fix blockack-req processingJohannes Berg1-2/+11
Daniel reported that the paged RX changes had broken blockack request frame processing due to using data that wasn't really part of the skb data. Fix this using skb_copy_bits() for the needed data. As a side effect, this adds a check on processing too short frames, which previously this code could do. Reported-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-01ath5k: wake queues on resetBruno Randolf1-14/+3
We can wake all queues after a chip reset since everything should be set up and we are ready to transmit. If we don't do that we might end up starting up with stopped queues, not beeing able to transmit. (This started to happen after "ath5k: clean up queue manipulation" but since periodic calibration also stopped and started the queues this effect was hidden most of the time). This way we can also get rid of the superfluous ath5k_reset_wake() function. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-01drivers/isdn/hardware/mISDN: Use GFP_ATOMIC when a lock is heldJulia Lawall1-2/+2
The function inittiger is only called from nj_init_card, where a lock is held. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @gfp exists@ identifier fn; position p; @@ fn(...) { ... when != spin_unlock_irqrestore when any GFP_KERNEL@p ... when any } @locked@ identifier gfp.fn; @@ spin_lock_irqsave(...) ... when != spin_unlock_irqrestore fn(...) @depends on locked@ position gfp.p; @@ - GFP_KERNEL@p + GFP_ATOMIC // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01ksz884x: Add missing validate_addr hookDenis Kirjanov1-0/+1
Add missing validate_addr hook Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01ksz884x: convert to netdev_tx_tDenis Kirjanov1-1/+1
Convert TX hook to netdev_tx_t type Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01virtio-net: pass gfp to add_bufMichael S. Tsirkin1-4/+4
virtio-net bounces buffer allocations off to a thread if it can't allocate buffers from the atomic pool. However, if posting buffers still requires atomic buffers, this is unlikely to succeed. Fix by passing in the proper gfp_t parameter. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01be2net: convert hdr.timeout in be_cmd_loopback_test() to le32Sathya Perla1-1/+1
The current code fails on ppc as hdr.timeout is not being converted to le32. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01can: mpc5xxx_can.c: Fix build failureAnatolij Gustschin1-5/+5
Fixes build error caused by the OF device_node pointer being moved into struct device. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31net/ipv4/tcp_input.c: fix compilation breakage when FASTRETRANS_DEBUG > 1Joe Perches1-2/+2
Commit: c720c7e8383aff1cb219bddf474ed89d850336e3 missed these. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31Merge branch 'master' of ↵David S. Miller4-17/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2010-05-31net: sock_queue_err_skb() dont mess with sk_forward_allocEric Dumazet4-24/+33
Correct sk_forward_alloc handling for error_queue would need to use a backlog of frames that softirq handler could not deliver because socket is owned by user thread. Or extend backlog processing to be able to process normal and error packets. Another possibility is to not use mem charge for error queue, this is what I implemented in this patch. Note: this reverts commit 29030374 (net: fix sk_forward_alloc corruptions), since we dont need to lock socket anymore. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31netfilter: xtables: stackptr should be percpuEric Dumazet4-13/+6
commit f3c5c1bfd4 (netfilter: xtables: make ip_tables reentrant) introduced a performance regression, because stackptr array is shared by all cpus, adding cache line ping pongs. (16 cpus share a 64 bytes cache line) Fix this using alloc_percpu() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-By: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-31netfilter: don't xt_jumpstack_alloc twice in xt_register_tableXiaotian Feng1-4/+0
In xt_register_table, xt_jumpstack_alloc is called first, later xt_replace_table is used. But in xt_replace_table, xt_jumpstack_alloc will be used again. Then the memory allocated by previous xt_jumpstack_alloc will be leaked. We can simply remove the previous xt_jumpstack_alloc because there aren't any users of newinfo between xt_jumpstack_alloc and xt_replace_table. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jan Engelhardt <jengelh@medozas.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alexey Dobriyan <adobriyan@gmail.com> Acked-By: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-31greth: Fix build after OF device conversions.David S. Miller1-6/+5
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller3919-121402/+289099
2010-05-30Linux 2.6.35-rc1v2.6.35-rc1Linus Torvalds1-2/+2
.. and thus endeth the merge window.
2010-05-30Merge branch 'slub/urgent' of ↵Linus Torvalds2-29/+15
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'slub/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: SLUB: Allow full duplication of kmalloc array for 390 slub: move kmem_cache_node into it's own cacheline
2010-05-30Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mutex: Fix optimistic spinning vs. BKL
2010-05-30Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds8-16/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tui: Fix last use_browser problem related to .perfconfig perf symbols: Add the build id cache to the vmlinux path perf tui: Reset use_browser if stdout is not a tty ring-buffer: Move zeroing out excess in page to ring buffer code ring-buffer: Reset "real_end" when page is filled
2010-05-30ia64: revert __node_random additionLinus Torvalds1-17/+0
This partially reverts commit 4ec37de89d8c758ee8115e0e64b3f994910789ee ("[IA64] Fix build breakage"), since the commit that made it necessary got reverted earlier (see commit 35926ff5fba8, 'Revert "cpusets: randomize node rotor used in cpuset_mem_spread_node()"') Even if we ever re-introduce this, there is no reason to make __node_random be some architecture-specific function. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-30Merge branch 'for-linus' of ↵Linus Torvalds7-82/+500
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: mm: export generic_pipe_buf_*() to modules fuse: support splice() reading from fuse device fuse: allow splice to move pages mm: export remove_from_page_cache() to modules mm: export lru_cache_add_*() to modules fuse: support splice() writing to fuse device fuse: get page reference for readpages fuse: use get_user_pages_fast() fuse: remove unneeded variable
2010-05-30Merge branch 'for-linus' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig: kconfig: Hide error output in find command in streamline_config.pl kconfig: Fix typo in comment in streamline_config.pl kconfig: Make a variable local in streamline_config.pl
2010-05-30Merge branch 'for-next' of ↵Linus Torvalds62-1251/+7999
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits) mfd: Rename twl5031 sih modules mfd: Storage class for timberdale should be before const qualifier mfd: Remove unneeded and dangerous clearing of clientdata mfd: New AB8500 driver gpio: Fix inverted rdc321x gpio data out registers mfd: Change rdc321x resources flags to IORESOURCE_IO mfd: Move pcf50633 irq related functions to its own file. mfd: Use threaded irq for pcf50633 mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read mfd: Fix pcf50633 bitfield logic in interrupt handler gpio: rdc321x needs to select MFD_CORE mfd: Use menuconfig for quicker config editing ARM: AB3550 board configuration and irq for U300 mfd: AB3550 core driver mfd: AB3100 register access change to abx500 API mfd: Renamed ab3100.h to abx500.h gpio: Add TC35892 GPIO driver mfd: Add Toshiba's TC35892 MFD core mfd: Delay to mask tsc irq in max8925 mfd: Remove incorrect wm8350 kfree ...
2010-05-30Merge branch 'next' of ↵Linus Torvalds10-1/+1204
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: DMA40 U8500 platform configuration DMA: PL330: Add dma api driver
2010-05-30Merge branch 'for-linus' of ↵Linus Torvalds5-622/+203
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Remove DCA support until feature is finished IB/qib: Use a single txselect module parameter for serdes tuning IB/qib: Don't rely on (undefined) order of function parameter evaluation IB/ucm: Use memdup_user() IB/qib: Fix undefined symbol error when CONFIG_PCI_MSI=n
2010-05-30Merge branch 'for_linus' of ↵Linus Torvalds27-560/+274
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Convert quota statistics to generic percpu_counter ext3 uses rb_node = NULL; to zero rb_root. quota: Fixup dquot_transfer reiserfs: Fix resuming of quotas on remount read-write pohmelfs: Remove dead quota code ufs: Remove dead quota code udf: Remove dead quota code quota: rename default quotactl methods to dquot_ quota: explicitly set ->dq_op and ->s_qcop quota: drop remount argument to ->quota_on and ->quota_off quota: move unmount handling into the filesystem quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers quota: move remount handling into the filesystem ocfs2: Fix use after free on remount read-only Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
2010-05-30Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds11-26/+93
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cpufeature: Unbreak compile with gcc 3.x x86, pat: Fix memory leak in free_memtype x86, k8: Fix section mismatch for powernowk8_exit() lib/atomic64_test: fix missing include of linux/kernel.h x86: remove last traces of quicklist usage x86, setup: Phoenix BIOS fixup is needed on Dell Inspiron Mini 1012 x86: "nosmp" command line option should force the system into UP mode arch/x86/pci: use kasprintf x86, apic: ack all pending irqs when crashed/on kexec
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 01:52:19 +0000