summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-07-14net: vlan: remove reduntant check in ndo_fix_features callbackMichał Mirosław1-2/+1
Use the fact that ORing with zero is a no-op. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: m68k/nfeth: Remove wrong usage of dev->flagsMichał Mirosław1-1/+0
Remove wrong setting of dev->flags. NETIF_F_NO_CSUM maps to IFF_DEBUG there, so looks like a mistake. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14ps3_gelic: Don't kill the device on DMA failureAndre Heider1-1/+3
Reset card->tx_dma_progress when lv1_net_start_tx_dma() fails or it won't send anything afterwards anymore Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14ps3_gelic: Fix start_xmit kick error pathAndre Heider1-3/+7
Revert to a proper state when gelic_card_kick_txdma() fails: - Don't trigger BUG_ON when releasing the unsent tx descriptor - Reset the tx chain head since the tail was not modified and hence not in sync - Unlink the released descriptor bus address from its predecessor Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14ps3_gelic: Fix typosAndre Heider1-3/+3
Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14qlcnic: change capture mask for FW dumpAnirban Chakraborty2-8/+4
o Change FW dump capture mask to a defult value, instead of using the recommended value from the FW. This was done to keep the capture mask consistent with other function drivers. o Update driver version to 5.0.21 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14qlcnic: define error code for loopback testAmit Kumar Salecha3-12/+30
o Defined error code such as fw not responding, test already running and cable not connected. o Check Fw capability before performing loopback test. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14qlcnic: fix race in skb->len access.Sucheta Chakraborty1-2/+2
As soon as skb is given to hardware, TX completion can free skb under us. Therefore, we should update dev stats before kicking the device. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14qlcnic: enable mac-learning in promiscous mode.Sucheta Chakraborty3-6/+16
MAC learning is required in bridge mode. During bridge mode device will be put in promiscous mode. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14qlcnic: updated supported cards informationSritej Velaga1-0/+2
Added QME8242-k 10GbE Dual Port Mezzanine Card to supported card info. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14qlcnic: fix chip reset logicSritej Velaga1-7/+8
Chip reset logic (IDC logic) has changed with fw dump support. This broked compatibility with driver using older IDC logic. Changes to make it compatible with drivers using older IDC logic. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14bnx2: Read iSCSI config from shared memory during ->probe()Michael Chan2-4/+16
The scratchpad location that we were reading from has not been initialized yet during ->probe(), so we were getting inaccurate information. Update version to 2.1.10. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14bnx2: Add MCP dumpJeffrey Huang2-13/+56
to help debug issues related to management firmware. Signed-off-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14cnic: Return proper error code if we fail to send netlink messageMichael Chan2-3/+3
to allow iSCSI connection to fail faster instead of waiting for the long timeout. Update version to 2.5.6. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14cnic: Fix ring setup/shutdown codeMichael Chan1-2/+7
Latest bnx2x driver uses different CID for the iSCSI rings, so we need to pass it in the ring init data. The rx ring is also zeroed out to prevent stale DMA addresses from being used after shutdown. The same cp local variable redefined inside the else branch is also eliminated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14cnic: Fix port_mode settingMichael Chan1-1/+1
CHIP_2_PORT_MODE was not set correctly. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14cnic: Replace get_random_bytes() with random32()Michael Chan1-2/+3
Suggested by Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14Merge branch 'master' of ↵David S. Miller8-99/+152
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next
2011-07-14tg3: Match power source to driver stateMatt Carlson1-8/+16
Now that the driver state (and power source) is being more intensely scrutinized, we need to make sure it is correct 100% of the time. This patch finds and fixes all dangling power state transitions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14tg3: Add function status reportingMatt Carlson2-24/+91
This patch adds code to update the status of the function to a common location to the critical section added in the previous patch. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14tg3: Create critical section around GPIO togglingMatt Carlson2-11/+53
The code that performs the power source switching will need to consider the status of the other devices before making any switches. The status updates and power source switching will need to be an atomic operation, so a critical section will be needed. This patch establishes the critical section through a CPMU mutex. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14tg3: Determine PCI function number in one placeMatt Carlson2-3/+12
tg3 devices will need to know exactly what function number they are so that they can communicate their status to the other functions. In a KVM environment, the function number of a device presented by the kernel might not be the true function number, so an alternative method to determine the function number is needed. This patch used to contain an implementation for the alternative method, but recently we discovered a hardware bug that renders it incorrect. While new method is not yet known, it is still useful to consolidate the code that determines the PCI function to one location and use the results throughout the code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14tg3: Check transitions to D0 power stateMatt Carlson1-10/+17
Currently pci_set_power_state() does not return useful return codes for transitions to the D0 power state. If a device refuses to go into D0, the PCI layer issues a warning but returns success. Entering into D0 is a requirement for correct operation of tg3 devices though. If the PCI layer should be changed to return an error code for this type of failure, the tg3 driver would be interested in catching it and reacting to it. This patch makes the necessary modifications. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14tg3: Move power state transitions to init_oneMatt Carlson1-43/+34
The tg3 driver is going to require memory mapped register access much sooner than before. This patch makes sure the device is in the D0 power state as soon as possible, and moves the code that enables the memory arbiter outside tg3_get_eeprom_hw_cfg() where it can be more easily monitored. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14tg3: Detect APE enabled devs earlierMatt Carlson1-21/+31
The following patch will require the driver to communicate with the APE much sooner than before. This patch make sure the APE registers are memory mapped and that the ENABLE_APE bit is set before the first use. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14af-packet: fix - avoid reading stale dataChetan Loke1-1/+2
Currently we flush tp_status and then flush the remainder of the header+payload. tp_status should be flushed in the end to avoid stale data being read by user-space. Incorrectly re-ordered barriers in v1. Signed-off-by: Chetan Loke <loke.chetan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14Merge branch 'master' of ↵David S. Miller350-1786/+26458
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-14net: Embed hh_cache inside of struct neighbour.David S. Miller9-105/+59
Now that there is a one-to-one correspondance between neighbour and hh_cache entries, we no longer need: 1) dynamic allocation 2) attachment to dst->hh 3) refcounting Initialization of the hh_cache entry is indicated by hh_len being non-zero, and such initialization is always done with the neighbour's lock held as a writer. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13Merge branch 'for-linus' of ↵Linus Torvalds2-27/+63
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Bus width testing needs to handle suspend/resume
2011-07-14sfc: Remove 'Communications' after 'Solarflare' in references to hardwareBen Hutchings2-3/+2
Branding can now be abbreviated. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-07-13Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds5-19/+15
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Fix use of static variable in rpcb_getport_async NFSv4.1: update nfs4_fattr_bitmap_maxsz SUNRPC: Fix a race between work-queue and rpc_killall_tasks pnfs: write: Set mds_offset in the generic layer - it is needed by all LDs
2011-07-13Merge branch 'rc-fixes' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Do not write to builddir in modules_install
2011-07-13Merge branch 'drm-fixes' of ↵Linus Torvalds7-15/+38
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blits agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2M drm/radeon/kms: fix typo in read_disabled vbios code drm/radeon/kms: use correct BUS_CNTL reg on rs600 drm/radeon/kms: fix backend map typo on juniper drm/radeon/kms: fix regression in hotplug
2011-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds29-72/+187
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) slip: fix wrong SLIP6 ifdef-endif placing natsemi: fix another dma-debug report sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket net: Fix default in docs for tcp_orphan_retries. hso: fix a use after free condition net/natsemi: Fix module parameter permissions XFRM: Fix memory leak in xfrm_state_update sctp: Enforce retransmission limit during shutdown mac80211: fix TKIP replay vulnerability mac80211: fix ie memory allocation for scheduled scans ssb: fix init regression of hostmode PCI core rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M ath9k: Fix tx throughput drops for AR9003 chips with AES encryption carl9170: add NEC WL300NU-AG usbid cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex ath5k: fix incorrect use of drvdata in PCI suspend/resume code ath5k: fix incorrect use of drvdata in sysfs code Bluetooth: Fix memory leak under page timeouts Bluetooth: Fix regression with incoming L2CAP connections Bluetooth: Fix hidp disconnect deadlocks and lost wakeup ...
2011-07-13mmc: core: Bus width testing needs to handle suspend/resumePhilip Rakity2-27/+63
On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-13sfc: Remove 'Solarstorm' from Kconfig descriptionsBen Hutchings1-4/+4
The 'Solarstorm' brand is being retired and it's redundant with the company name. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-07-13slip: remove dead code within the slip initializationMatvejchikov Ilya1-18/+6
This following code contains a dead "if (dev).." block: ... for (i = 0; i < slip_maxdev; i++) { dev = slip_devs[i]; if (dev == NULL) break; } /* Sorry, too many, all slots in use */ if (i >= slip_maxdev) return NULL; if (dev) { sl = netdev_priv(dev); if (test_bit(SLF_INUSE, &sl->flags)) { unregister_netdevice(dev); dev = NULL; slip_devs[i] = NULL; } } ... The reason is that the code starting with "if (dev).." is never called as when we found an empty slot (dev == NULL) we break the loop and "if (dev).." not works eiter the loop ends and we get out with "i >= slip_maxdev". Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13slip: remove redundant check slip_devs for NULLMatvejchikov Ilya1-3/+0
As slip_devs is initialized on module load stage there is no reason to check it for NULL anywhere instead of the deinitialization routine because if we can't get enough memory on startup we don't run at all. Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13slip: fix MTU comparation operation when reallocating buffersMatvejchikov Ilya1-1/+1
In sl_realloc_bufs() there is no reason to check if the requested MTU greater than or equal to the current MTU value as this function called only when requested MTU not equals to the current value. So, the ">=" operation can be safely replaced with the ">". Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13slip: remove redundant NULL-pointer check before calling slhc_freeMatvejchikov Ilya1-2/+1
Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13net: Kill support for multiple hh_cache entries per neighbourDavid S. Miller2-26/+20
This never, ever, happens. Neighbour entries are always tied to one address family, and therefore one set of dst_ops, and therefore one dst_ops->protocol "hh_type" value. This capability was blindly imported by Alexey Kuznetsov when he wrote the neighbour layer. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13net: Push protocol type directly down to header_ops->cache()David S. Miller7-13/+13
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13ipv4: Inline neigh binding.David Miller3-28/+59
Get rid of all of the useless and costly indirection by doing the neigh hash table lookup directly inside of the neighbour binding. Rename from arp_bind_neighbour to rt_bind_neighbour. Use new helpers {__,}ipv4_neigh_lookup() In rt_bind_neighbour() get rid of useless tests which are never true in the context this function is called, namely dev is never NULL and the dst->neighbour is always NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13drm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blitsAlex Deucher1-2/+7
Compute drivers may change this, so make sure to emit it to avoid errors in bo blits. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39119 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-13agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2MChris Wilson1-3/+4
Konstantin Belousov found an error in the define of G4x_GMCH_SIZE_VT_2M relative to the GMCH specs, and confirmed that indeed one of his users with a Q45 reports 0xb not 0xc for a 2/2MiB GATT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Konstantin Belousov <kostikbel@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-12net: Add documentation for netdev features handlingMichał Mirosław1-0/+154
v2: incorporated suggestions from Randy Dunlap Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12be2net: move to new vlan modelAjit Khaparde2-26/+9
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12be2net: account for skb allocation failuresEric Dumazet3-2/+4
If we cannot allocate new skbs in RX completion handler, we should increase netdevice rx_dropped counter, not spam console messages. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12e1000e: use GFP_KERNEL allocations at init timeJeff Kirsher2-17/+22
In process and sleep allowed context, favor GFP_KERNEL allocations over GFP_ATOMIC ones. -v2: fixed checkpatch.pl warnings CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Ben Greear <greearb@candelatech.com> CC: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-12e1000e: Add Jumbo Frame support to 82583 devicesCarolyn Wyborny1-3/+2
This patch adds support for the Jumbo Frames feature on 82583 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 09:01:06 +0000