summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-01-07Blackfin arch: update board default configsSonic Zhang21-1254/+2603
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.Sonic Zhang1-1/+1
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix typo in early printk bit size processingMike Frysinger1-2/+2
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrdSonic Zhang2-2/+9
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add SDIO host driver platform dataCliff Cai3-0/+52
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bug - kernel stops at initial consoleSonic Zhang1-0/+4
Bug: Boot kernel in BF533-EZKIT without set ip during boot, it stops at initial console. Restore serial platform_device data to fix this issue. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bug - kernel crash after config IP for ethernet portMichael Hennerich1-1/+1
Fix typo - kernel crash on bf533-stamp/bf533-ezkit after config IP for ethernet port Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add sdh support for bf518f-ezbrdCliff Cai2-0/+203
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bug - kernel detects BF532 incorrectlyRobin Getz1-1/+1
fix this typo in this patch Reported-by: Ben Matthews <mben12@gmail.com> Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add () to avoid warnings from gccMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: change HWTRACE Kconfig and set it on defaultMike Frysinger1-3/+3
change the hwtrace description to be less confusing and default it to on (since there shouldnt be any crashes in the miss handler code itself) Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Clean oprofile build path for blackfinGraf Yang4-44/+21
[Mike Frysinger <vapier.adi@gmail.com>: scrub comment header] Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: remove hardware PM code, oprofile not use itGraf Yang8-492/+0
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rewrite get_sclk()/get_vco()Mike Frysinger1-15/+16
rewrite get_sclk()/get_vco() based on the assumption sclk/vco never changes (since today it cannot) Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: cleanup and unify the ins functionsMike Frysinger1-345/+84
this also fixes some errors in the ipipe merge Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Make bfin_mac built for bf51xSonic Zhang3-4/+335
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li58-419/+1881
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Add AD7879 defaults for the Blackfin Landscape LCD EZ-ExtenderMichael Hennerich2-0/+72
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: disable pthread stack check for SMP at runtimeSonic Zhang4-0/+22
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge kgdb test code using common CONFIG_KGDB_TESTSMike Frysinger3-1/+131
[Grace Pan <grace.pan@analog.com>: Add case for kgdb test in l1 and l2] Signed-off-by: Grace Pan <grace.pan@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Faster C implementation of no-MPU CPLB handlerBernd Schmidt19-1442/+515
This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code. We ditch the old cplb-nompu implementation, which is a good example of why a good algorithm in a HLL is preferrable to a bad algorithm written in assembly. Rather than try to construct a table of all posible CPLBs and search it, we just create a (smaller) table of memory regions and their attributes. Some of the data structures are now unified for both the mpu and nompu cases. A lot of needless complexity in cplbinit.c is removed. Further optimizations: * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving these registers on the stack when entering a CPLB exception. * lose cli/nop/nop/sti sequences for some workarounds - these don't * make sense in an exception context Additional code unification should be possible after this. [Mike Frysinger <vapier.adi@gmail.com>: - convert CPP if statements to C if statements - remove redundant statements - use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten, we can punt it - add some BUG_ON() checks to make sure we dont overflow the small cplb_bounds array - add i/d cplb entries for the bootrom because there is functions/data in there we want to access - we do not need a NULL trailing entry as any time we access the bounds arrays, we use the nr_bounds variable ] Signed-off-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: update anomaly headers to match latest sheetsMike Frysinger7-5/+43
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix bug - IrDA SIR build failed for BF533.Graf Yang3-6/+13
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: panic when running on a chip rev below what we are compiled forRobin Getz1-1/+4
If we are running on a chip revision below what we are compiled for, there will be missing anomaly workarounds, and a panic is inevitable. Do is sooner, rather than later, so people don't look for bugs that already have workarounds (that they turned off). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix bug - wrong endpoint number and dma channels of USBBryan Wu5-10/+10
Blackfin MUSB has 8 endpoints including ep0 and 8 dma channels not 7 Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: do not allow people to pass in a diff clkin_hz valueMike Frysinger1-0/+4
do not allow people to pass in a diff clkin_hz value when reprogramming clocks -- it is too late currently Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: allow clkin_hz to be specified on the command lineMike Frysinger1-3/+21
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: show_cpuinfo - consolidate ugly castsMike Frysinger1-11/+8
rather than use *(unsigned int *)v everywhere, do this once with a local cpu_num variable Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add __init markings to Blackfin timer init functionsMike Frysinger1-3/+3
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add get_dma_config() func to match set_dma_config()Mike Frysinger1-0/+4
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add volatile markings to DMA MMRsMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Make the interrupt edge and polarity type configurable based ↵Michael Hennerich1-1/+1
on IORESOURCE_BITS Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Remove wasted SIR header filesGraf Yang7-1001/+0
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang24-147/+882
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: update header to match new locationGraf Yang1-2/+2
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix typo (channel)Jean Delvare2-2/+2
Channnel -> Channel Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Replace C version of 64 bit multiply with hand optimized assemblyBernd Schmidt2-99/+68
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: remove unused members of dma_channel structMike Frysinger1-3/+0
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Update some inline assembly, tweak some register constraintsRobin Getz3-5/+10
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: stub out pgprot_noncached() like other people seem to do on nommuMike Frysinger1-0/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix incorrect use of loose in cpufreq.cNick Andrew1-1/+1
It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add __must_check markings to our user functions like other archesMike Frysinger1-7/+8
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: dma code: cannot simply OR the ndsizeMike Frysinger1-1/+3
cannot simply OR the ndsize ... need to clear out the old value first Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add bfin_read_MDMA_S0_CONFIG compat for dma_memcpyMike Frysinger1-0/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bug - crashes in tcp_v4_send_resetBernd Schmidt1-1/+2
Michael says that some bugs are crashes in tcp_v4_send_reset. There's a missing clobber of "CC" in our checksum assembly statement; fixing this makes the generated code look much saner. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: push cache flushing up to dma_memcpyMike Frysinger1-11/+14
push cache flushing up to dma_memcpy() so that we call the flush functions just once Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: request_dma() returns 0 on success, not channelMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: desc_ptr is a pointer, so declare it as suchMike Frysinger1-8/+8
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: move most dma functions into static inlinesMike Frysinger2-252/+137
move most dma functions into static inlines since they are vastly 1 liners that get/set a value in a structure Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: dma header file: strip down includes to only necessary onesMike Frysinger1-8/+3
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-03 03:48:19 +0000