summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-01-29Linux 2.6.33-rc6v2.6.33-rc6Linus Torvalds1-1/+1
2010-01-29mfd: Fix asic3 buildDmitry Artamonow1-1/+1
asic3 also needs tmio_core or otherwise will fail to build. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-29Merge branch 'for-linus' of ↵Linus Torvalds7-69/+198
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: update multi-touch protocol documentation Input: add the ABS_MT_PRESSURE event Input: winbond-cir - remove dmesg spam Input: lifebook - add another Lifebook DMI signature Input: ad7879 - support auxiliary GPIOs via gpiolib
2010-01-29mm: fix migratetype bug which slowed swappingHugh Dickins1-2/+3
After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves. Fix that in the most straightforward way (which, considering the overheads of alternative approaches, is Mel's preference): the right migratetype is already in page_private(page), but free_pcppages_bulk() wasn't using it. How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that commit was easy, but explaining the magnitude of the slowdown not easy. The same effect appears, but much less markedly, with SLAB, and even less markedly on other machines (the PowerMac divides into fewer zones than x86, I think that may be a factor). We guess that lumpy reclaim of short-lived high-order pages is implicated in some way, and probably this bug has been tickling a poor decision somewhere in page reclaim. But instrumentation hasn't told me much, I've run out of time and imagination to determine exactly what's going on, and shouldn't hold up the fix any longer: it's valid, and might even fix other misbehaviours. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds7-30/+36
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check total number of devices when removing missing Btrfs: check return value of open_bdev_exclusive properly Btrfs: do not mark the chunk as readonly if in degraded mode Btrfs: run orphan cleanup on default fs root Btrfs: fix a memory leak in btrfs_init_acl Btrfs: Use correct values when updating inode i_size on fallocate Btrfs: remove tree_search() in extent_map.c Btrfs: Add mount -o compress-force
2010-01-29sparc: TIF_ABI_PENDING bit removalDavid Miller3-21/+4
Here are the sparc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-29x86: get rid of the insane TIF_ABI_PENDING bitH. Peter Anvin5-23/+13
Now that the previous commit made it possible to do the personality setting at the point of no return, we do just that for ELF binaries. And suddenly all the reasons for that insane TIF_ABI_PENDING bit go away, and we can just make SET_PERSONALITY() just do the obvious thing for a 32-bit compat process. Everything becomes much more straightforward this way. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-29Split 'flush_old_exec' into two functionsLinus Torvalds10-41/+33
'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-28Input: update multi-touch protocol documentationHenrik Rydberg1-8/+40
This patch documents a new ABS_MT parameter and adds further text to clarify some points around the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: add the ABS_MT_PRESSURE eventHenrik Rydberg2-0/+2
For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: winbond-cir - remove dmesg spamDavid Härdeman1-1/+1
I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable <stable@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Merge branch 'for-linus' of ↵Linus Torvalds10-58/+62
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Fix failure exit in ipathfs fix oops in fs/9p late mount failure fix leak in romfs_fill_super() get rid of pointless checks after simple_pin_fs() Fix failure exits in bfs_fill_super() fix affs parse_options() Fix remount races with symlink handling in affs Fix a leak in affs_fill_super()
2010-01-28Merge branch 'for-linus' of ↵Linus Torvalds3-101/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: remove IOH range fetching PCI: fix nested spinlock hang in aer_inject
2010-01-28Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds8-13/+192
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Update mach-types [ARM] orion5x: D-link DNS-323 rev. B1 power-off [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2 [ARM] pxa: fix irq suspend/resume for pxa25x [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two
2010-01-28[ARM] Update mach-typesRussell King1-1/+59
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-28Merge branch 'fix' of ↵Russell King3-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-01-28Btrfs: check total number of devices when removing missingJosef Bacik1-2/+2
If you have a disk failure in RAID1 and then add a new disk to the array, and then try to remove the missing volume, it will fail. The reason is the sanity check only looks at the total number of rw devices, which is just 2 because we have 2 good disks and 1 bad one. Instead check the total number of devices in the array to make sure we can actually remove the device. Tested this with a failed disk setup and with this test we can now run btrfs-vol -r missing /mount/point and it works fine. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: check return value of open_bdev_exclusive properlyJosef Bacik1-2/+2
Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive returns ERR_PTR(), not NULL. So change the return value properly. This is important if you accidently specify a device that doesn't exist when trying to add a new device to an array, you will panic the box dereferencing bdev. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: do not mark the chunk as readonly if in degraded modeJosef Bacik1-0/+5
If a RAID setup has chunks that span multiple disks, and one of those disks has failed, btrfs_chunk_readonly will return 1 since one of the disks in that chunk's stripes is dead and therefore not writeable. So instead if we are in degraded mode, return 0 so we can go ahead and allocate stuff. Without this patch all of the block groups in a RAID1 setup will end up read-only, which will mean we can't add new disks to the array since we won't be able to make allocations. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: run orphan cleanup on default fs rootJosef Bacik2-6/+6
This patch revert's commit 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: fix a memory leak in btrfs_init_aclYang Hongyang1-0/+1
In btrfs_init_acl() cloned acl is not released Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: Use correct values when updating inode i_size on fallocateAneesh Kumar K.V1-4/+9
commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: remove tree_search() in extent_map.cMiao Xie1-14/+0
This patch removes tree_search() in extent_map.c because it is not called by anything. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Btrfs: Add mount -o compress-forceChris Mason3-2/+11
The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-01-28Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds13-308/+391
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs MIPS: PowerTV: Streamline access to platform device registers MIPS: Fix vmlinuz build for 32bit-only math shells MIPS: Add support of LZO-compressed kernels
2010-01-28Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6Linus Torvalds1-1/+0
* 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: fix volume creation input checking
2010-01-28Merge branch 'for-linus' of ↵Linus Torvalds4-29/+70
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix crashes with TSB43AB23 on 64bit systems firewire: core: fix use-after-free regression in FCP handler firewire: cdev: add_descriptor documentation fix firewire: core: add_descriptor size check
2010-01-28x86/PCI: remove IOH range fetchingJeff Garrett2-95/+1
Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett <jeff@jgarrett.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-28Input: lifebook - add another Lifebook DMI signatureJon Dodgson1-0/+6
There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson <crayzeejon@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQsDavid VomLehn4-3/+18
The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: PowerTV: Streamline access to platform device registersDavid VomLehn6-303/+361
Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Fix vmlinuz build for 32bit-only math shellsAlexander Clouter1-2/+5
POSIX requires $((<expression>)) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: Add support of LZO-compressed kernelsWu Zhangjin3-0/+7
The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-27Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King4-6/+118
2010-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds25-126/+291
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree [SCSI] zfcp: Set hardware timeout as requested by BSG request. [SCSI] zfcp: Introduce bsg_timeout callback. [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout [SCSI] zfcp: add missing compat ptr conversion [SCSI] zfcp: Fix linebreak in hba trace [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request [SCSI] qla2xxx: Update version number to 8.03.01-k10. [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. [SCSI] qla2xxx: Correct FCP2 recovery handling. [SCSI] scsi_lib: Fix bug in completion of bidi commands [SCSI] mptsas: Fix issue with chain pools allocation on katmai [SCSI] aacraid: fix File System going into read-only mode [SCSI] lpfc: fix file permissions
2010-01-27Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds11-22/+23
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix single stepped svcs with TRACE_IRQFLAGS=y [S390] zcrypt: Do not remove coprocessor for error 8/72 [S390] sclp_vt220: set initial terminal window size [S390] use set_current_state in sigsuspend [S390] irqflags: add missing types.h include [S390] dasd: fix possible NULL pointer errors
2010-01-27drm/i915: Selectively enable self-reclaimChris Wilson4-52/+19
Having missed the ENOMEM return via i915_gem_fault(), there are probably other paths that I also missed. By not enabling NORETRY by default these paths can run the shrinker and take memory from the system (but not from our own inactive lists because our shrinker can not run whilst we hold the struct mutex) and this may allow the system to survive a little longer whilst our drivers consume all available memory. References: OOM killer unexpectedly called with kernel 2.6.32 http://bugzilla.kernel.org/show_bug.cgi?id=14933 v2: Pass gfp into page mapping. v3: Use new read_cache_page_gfp() instead of open-coding. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-27firewire: ohci: fix crashes with TSB43AB23 on 64bit systemsStefan Richter1-1/+3
Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-27mm: add new 'read_cache_page_gfp()' helper functionLinus Torvalds2-32/+70
It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds13-865/+40
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) Revert "x86: ucode-amd: Load ucode-patches once ..." x86: Disable HPET MSI on ATI SB700/SB800 x86: Set hotpluggable nodes in nodes_possible_map
2010-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds1-4/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix UP build.
2010-01-27UBI: fix volume creation input checkingMika Westerberg1-1/+0
Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@vger.kernel.org
2010-01-27[S390] fix single stepped svcs with TRACE_IRQFLAGS=yMartin Schwidefsky2-0/+2
If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] zcrypt: Do not remove coprocessor for error 8/72Felix Beck2-0/+4
In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] sclp_vt220: set initial terminal window sizeHendrik Brueckner1-0/+4
When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] use set_current_state in sigsuspendMartin Schwidefsky1-1/+1
Use set_current_state instead of a direct assignment to set the task state of the current process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] irqflags: add missing types.h includeHeiko Carstens1-6/+3
Add missing types.h include. Otherwise would cause build breakages on hw breakpoint support, because of undefined BITS_PER_LONG. Also fix up the copyright line and remove the superfluous __KERNEL__ ifdef. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] dasd: fix possible NULL pointer errorsStefan Haberland4-15/+9
Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-26x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID ↵Russ Anderson2-2/+2
drivers. Pass the number of minors when unregistering MSR and CPUID drivers. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Dean Nelson <dnelson@redhat.com> LKML-Reference: <20100127023722.GA22305@sgi.com> Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-26Fix failure exit in ipathfsAl Viro1-3/+1
deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>