summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-10-17ipv4: share tcp_v4_save_options() with cookie_v4_check()Cong Wang3-29/+21
cookie_v4_check() allocates ip_options_rcu in the same way with tcp_v4_save_options(), we can just make it a helper function. Cc: Krzysztof Kolasa <kkolasa@winsoft.pl> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17ipv4: call __ip_options_echo() in cookie_v4_check()Cong Wang1-1/+1
commit 971f10eca186cab238c49da ("tcp: better TCP_SKB_CB layout to reduce cache line misses") missed that cookie_v4_check() still calls ip_options_echo() which uses IPCB(). It should use TCPCB() at TCP layer, so call __ip_options_echo() instead. Fixes: commit 971f10eca186cab238c49da ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Cc: Krzysztof Kolasa <kkolasa@winsoft.pl> Cc: Eric Dumazet <edumazet@google.com> Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17atm: simplify lanai.c by using module_pci_driverMichael Opdenacker1-21/+1
This simplifies the lanai.c driver by using the module_pci_driver() macro, at the expense of losing only debugging messages. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16netlink: fix description of portidNicolas Dichtel1-1/+1
Avoid confusion between pid and portid. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16Merge branch 'master' of ↵David S. Miller7-16/+32
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-10-16 This series contains updates to fm10k and ixgbe. Matthew provides two fixes for fm10k, first sets the flag to fetch the host state before kicking off the service task that reads the host state when bringing the interface up. The second makes sure that we release the mailbox lock after detecting an error and before we return the error code. Andy Zhou provides a compile fix for fm10k, when the driver is compiled into the kernel and the VXLAN driver is compiled as a module. Emil provides a fix for ixgbe to prevent against a panic by trying to dereference a NULL pointer in ixgbe_ndo_set_vf_spoofchk(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-16ixgbe: check for vfs outside of sriov_num_vfs before dereferenceEmil Tantilov1-0/+3
The check for vfinfo is not sufficient because it does not protect against specifying vf that is outside of sriov_num_vfs range. All of the ndo functions have a check for it except for ixgbevf_ndo_set_spoofcheck(). The following patch is all we need to protect against this panic: ip link set p96p1 vf 0 spoofchk off BUG: unable to handle kernel NULL pointer dereference at 0000000000000052 IP: [<ffffffffa044a1c1>] ixgbe_ndo_set_vf_spoofchk+0x51/0x150 [ixgbe] Reported-by: Thierry Herbelot <thierry.herbelot@6wind.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Thierry Herbelot <thierry.herbelot@6wind.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16fm10k: Add CONFIG_FM10K_VXLAN configuration optionAndy Zhou2-3/+14
Compiling with CONFIG_FM10K=y and VXLAN=m resulting in linking error: drivers/built-in.o: In function `fm10k_open': (.text+0x1f9d7a): undefined reference to `vxlan_get_rx_port' make: *** [vmlinux] Error 1 The fix follows the same strategy as I40E. Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16fm10k: Unlock mailbox on VLAN addition failuresMatthew Vick1-3/+4
After grabbing the mailbox lock and detecting an error, the lock must be released before the error code can be returned. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-16fm10k: Check the host state when bringing the interface upMatthew Vick1-0/+1
Set the flag to fetch the host state before kicking off the service task that reads the host state when bringing the interface back up. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-15vxlan: using pskb_may_pull as early as possibleLi RongQing1-4/+2
pskb_may_pull should be used to check if skb->data has enough space, skb->len can not ensure that. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15vxlan: fix a use after free in vxlan_encap_bypassLi RongQing1-3/+5
when netif_rx() is done, the netif_rx handled skb maybe be freed, and should not be used. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15openvswitch: use vport instead of pFabian Frederick1-2/+2
All functions used struct vport *vport except ovs_vport_find_upcall_portid. This fixes 1 kerneldoc warning Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15openvswitch: kerneldoc warning fixFabian Frederick1-1/+1
s/sock/gs Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15gianfar: Add FCS to rx buffer size (fix)Claudiu Manoil1-1/+1
For each Rx frame the eTSEC writes its FCS (Frame Check Sequence) to the Rx buffer. The eTSEC h/w manual states in the "Receive Buffer Descriptor Field Descriptions" table: "Data length is the number of octets written by the eTSEC into this BD's data buffer if L is cleared (the value is equal to MRBLR), or, if L is set, the length of the frame including *CRC*, FCB (if RCTRL[PRSDEP > 00), preamble (if MACCFG2[PreAmRxEn]=1), time stamp (if RCTRL[TS] = 1) and any padding (RCTRL[PAL])." Though the FCS bytes are removed by the driver before passing the skb to the net stack, the Rx buffer size computation does not currently take into account the FCS bytes (4 bytes). Because the Rx buffer size is multiple of 512 bytes, leaving out the FCS is not a problem for the default MTU of 1500, as the Rx buffer size is 1536 in this case. However, for custom MTUs, where the difference between the MTU size and the Rx buffer size is less, this can be a problem as the computed Rx buffer size won't be enough to accomodate the FCS for a received frame that is big enough (close to MTU size). In such case the received frame is considered to be incomplete (L flag not set in the RxBD status) and silently dropped. Note that the driver does not currently support S/G on Rx, so it has to compute its Rx buffer size based on the MTU of the device. Reported-by: Kristian Otnes <kotnes@cisco.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15virtio_net: fix use after freeMichael S. Tsirkin1-1/+3
commit 0b725a2ca61bedc33a2a63d0451d528b268cf975 net: Remove ndo_xmit_flush netdev operation, use signalling instead. added code that looks at skb->xmit_more after the skb has been put in TX VQ. Since some paths process the ring and free the skb immediately, this can cause use after free. Fix by storing xmit_more in a local variable. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15net: fec: ptp: fix convergence issue to support LinuxPTP stackNimrod Andy3-42/+56
iMX6SX IEEE 1588 module has one hw issue in capturing the ATVR register. The current SW flow is: ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK; ts_counter_ns = ENET0->ATVR; The ATVR value is not expected value that cause LinuxPTP stack cannot be convergent. ENET Block Guide/ Chapter for the iMX6SX (PELE) address the issue: After set ENET_ATCR[Capture], there need some time cycles before the counter value is capture in the register clock domain. The wait-time-cycles is at least 6 clock cycles of the slower clock between the register clock and the 1588 clock. So need something like: ENET0->ATCR |= ENET_ATCR_CAPTURE_MASK; wait(); ts_counter_ns = ENET0->ATVR; For iMX6SX, the 1588 ts_clk is fixed to 25Mhz, register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns (40ns * 6). The patch add 1us delay before cpu read ATVR register. Changes V2: Modify the commit/comments log to describe the issue clearly. Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15cxgb4i : Fix -Wmaybe-uninitialized warning.Anish Bhatt1-1/+1
Identified by kbuild test robot. csk family is always set to be AF_INET or AF_INET6, so skb will always be initialized to some value but there is no harm in silencing the warning anyways. Signed-off-by: Anish Bhatt <anish@chelsio.com> Fixes : f42bb57c61fd ('cxgb4i : Fix -Wunused-function warning') Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15net: Add ndo_gso_checkTom Herbert4-4/+14
Add ndo_gso_check which a device can define to indicate whether is is capable of doing GSO on a packet. This funciton would be called from the stack to determine whether software GSO is needed to be done. A driver should populate this function if it advertises GSO types for which there are combinations that it wouldn't be able to handle. For instance a device that performs UDP tunneling might only implement support for transparent Ethernet bridging type of inner packets or might have limitations on lengths of inner headers. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15stmmac: fix sti compatibililiesGiuseppe CAVALLARO2-5/+6
this patch is to fix the stmmac data compatibilities for all the SoCs inside the platform file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15Merge branch 'cxgb4'David S. Miller4-139/+26
Anish Bhatt says: ==================== ipv6 and related cleanup for cxgb4/cxgb4i This patch set removes some duplicated/extraneous code from cxgb4i, guards cxgb4 against compilation failure based on ipv6 tristate, make ipv6 related code no longer be enabled by default irrespective of ipv6 tristate and fixes a refcnt issue. -Anish v2 : Provide more detailed commit messages, make subject more concise as recommended by Dave Miller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15cxgb4i: Remove duplicate call to dst_neigh_lookup()Anish Bhatt1-5/+0
There is an extra call to dst_neigh_lookup() leftover in cxgb4i that can cause an unreleased refcnt issue. Remove extraneous call. Signed-off-by: Anish Bhatt <anish@chelsio.com> Fixes : 759a0cc5a3e1b ('cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api') Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15cxgb4i : Fix -Wunused-function warningAnish Bhatt2-0/+10
A bunch of ipv6 related code is left on by default. While this causes no compilation issues, there is no need to have this enabled by default. Guard with an ipv6 check, which also takes care of a -Wunused-function warning. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15cxgb4 : Fix build failure in cxgb4 when ipv6 is disabled/not in-builtAnish Bhatt2-1/+9
cxgb4 ipv6 does not guard against ipv6 being disabled, or the standard ipv6 module vs inbuilt tri-state issue. This was fixed for cxgb4i & iw_cxgb4 but missed for cxgb4. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15cxgb4i : Remove duplicated CLIP handling codeAnish Bhatt2-133/+7
cxgb4 already handles CLIP updates from a previous changeset for iw_cxgb4, there is no need to have this functionality in cxgb4i. Remove duplicated code Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14tcp: TCP Small Queues and strange attractorsEric Dumazet1-7/+19
TCP Small queues tries to keep number of packets in qdisc as small as possible, and depends on a tasklet to feed following packets at TX completion time. Choice of tasklet was driven by latencies requirements. Then, TCP stack tries to avoid reorders, by locking flows with outstanding packets in qdisc in a given TX queue. What can happen is that many flows get attracted by a low performing TX queue, and cpu servicing TX completion has to feed packets for all of them, making this cpu 100% busy in softirq mode. This became particularly visible with latest skb->xmit_more support Strategy adopted in this patch is to detect when tcp_wfree() is called from ksoftirqd and let the outstanding queue for this flow being drained before feeding additional packets, so that skb->ooo_okay can be set to allow select_queue() to select the optimal queue : Incoming ACKS are normally handled by different cpus, so this patch gives more chance for these cpus to take over the burden of feeding qdisc with future packets. Tested: lpaa23:~# ./super_netperf 1400 --google-pacing-rate 3028000 -H lpaa24 -l 3600 & lpaa23:~# sar -n DEV 1 10 | grep eth1 06:16:18 AM eth1 595448.00 1190564.00 38381.09 1760253.12 0.00 0.00 1.00 06:16:19 AM eth1 594858.00 1189686.00 38340.76 1758952.72 0.00 0.00 0.00 06:16:20 AM eth1 597017.00 1194019.00 38480.79 1765370.29 0.00 0.00 1.00 06:16:21 AM eth1 595450.00 1190936.00 38380.19 1760805.05 0.00 0.00 0.00 06:16:22 AM eth1 596385.00 1193096.00 38442.56 1763976.29 0.00 0.00 1.00 06:16:23 AM eth1 598155.00 1195978.00 38552.97 1768264.60 0.00 0.00 0.00 06:16:24 AM eth1 594405.00 1188643.00 38312.57 1757414.89 0.00 0.00 1.00 06:16:25 AM eth1 593366.00 1187154.00 38252.16 1755195.83 0.00 0.00 0.00 06:16:26 AM eth1 593188.00 1186118.00 38232.88 1753682.57 0.00 0.00 1.00 06:16:27 AM eth1 596301.00 1192241.00 38440.94 1762733.09 0.00 0.00 0.00 Average: eth1 595457.30 1190843.50 38381.69 1760664.84 0.00 0.00 0.50 lpaa23:~# ./tc -s -d qd sh dev eth1 | grep backlog backlog 7606336b 2513p requeues 167982 backlog 224072b 74p requeues 566 backlog 581376b 192p requeues 5598 backlog 181680b 60p requeues 1070 backlog 5305056b 1753p requeues 110166 // Here, this TX queue is attracting flows backlog 157456b 52p requeues 1758 backlog 672216b 222p requeues 3025 backlog 60560b 20p requeues 24541 backlog 448144b 148p requeues 21258 lpaa23:~# echo 1 >/proc/sys/net/ipv4/tcp_tsq_enable_tcp_wfree_ksoftirqd_detect Immediate jump to full bandwidth, and traffic is properly shard on all tx queues. lpaa23:~# sar -n DEV 1 10 | grep eth1 06:16:46 AM eth1 1397632.00 2795397.00 90081.87 4133031.26 0.00 0.00 1.00 06:16:47 AM eth1 1396874.00 2793614.00 90032.99 4130385.46 0.00 0.00 0.00 06:16:48 AM eth1 1395842.00 2791600.00 89966.46 4127409.67 0.00 0.00 1.00 06:16:49 AM eth1 1395528.00 2791017.00 89946.17 4126551.24 0.00 0.00 0.00 06:16:50 AM eth1 1397891.00 2795716.00 90098.74 4133497.39 0.00 0.00 1.00 06:16:51 AM eth1 1394951.00 2789984.00 89908.96 4125022.51 0.00 0.00 0.00 06:16:52 AM eth1 1394608.00 2789190.00 89886.90 4123851.36 0.00 0.00 1.00 06:16:53 AM eth1 1395314.00 2790653.00 89934.33 4125983.09 0.00 0.00 0.00 06:16:54 AM eth1 1396115.00 2792276.00 89984.25 4128411.21 0.00 0.00 1.00 06:16:55 AM eth1 1396829.00 2793523.00 90030.19 4130250.28 0.00 0.00 0.00 Average: eth1 1396158.40 2792297.00 89987.09 4128439.35 0.00 0.00 0.50 lpaa23:~# tc -s -d qd sh dev eth1 | grep backlog backlog 7900052b 2609p requeues 173287 backlog 878120b 290p requeues 589 backlog 1068884b 354p requeues 5621 backlog 996212b 329p requeues 1088 backlog 984100b 325p requeues 115316 backlog 956848b 316p requeues 1781 backlog 1080996b 357p requeues 3047 backlog 975016b 322p requeues 24571 backlog 990156b 327p requeues 21274 (All 8 TX queues get a fair share of the traffic) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14Merge branch 'qlcnic'David S. Miller1-3/+3
Rajesh Borundia says: ==================== qlcnic: Bug fixes This series fixes following issues. * We were programming maximum number of arguments supported by adapter instead of required in a command. * Destroy tx command requires three arguments instead of two. Please apply these patches to net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14qlcnic: Fix number of arguments in destroy tx context commandRajesh Borundia1-1/+1
o Number of arguments taken by destroy tx command is three instead of two. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14qlcnic: Fix programming number of arguments in a command.Rajesh Borundia1-2/+2
o Initially we were programming maximum number of arguments. Instead we should program number of arguments required in a command. o Maximum number of arguments for 82xx adapter is four. Fix it for GET_ESWITCH_STATS command. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14genl_magic: Resolve logical-op warningsMark Rustad1-2/+2
Resolve "logical 'and' applied to non-boolean constant" warnings" that appear in W=2 builds by adding !! to a bit test. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14net: Trap attempts to call sock_kfree_s() with a NULL pointer.David S. Miller1-0/+2
Unlike normal kfree() it is never right to call sock_kfree_s() with a NULL pointer, because sock_kfree_s() also has the side effect of discharging the memory from the sockets quota. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14rds: avoid calling sock_kfree_s() on allocation failureCong Wang1-3/+4
It is okay to free a NULL pointer but not okay to mischarge the socket optmem accounting. Compile test only. Reported-by: rucsoftsec@gmail.com Cc: Chien Yen <chien.yen@oracle.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14cxgb4: Fix FW flash logic using ethtoolHariprasad Shenai3-6/+16
Use t4_fw_upgrade instead of t4_load_fw to write firmware into FLASH, since t4_load_fw doesn't co-ordinate with the firmware and the adapter can get hosed enough to require a power cycle of the system. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14Merge branch 'stmmac'David S. Miller3-211/+255
Giuseppe Cavallaro says: ==================== stmmac: review and fix the dwmac-sti glue-logic This patch is to review the whole glue logic adopted on STi SoCs that was bugged. In the old glue-logic there was a lot of confusion when setup the retiming especially for STiD127 where, for example, the bits 6 and 7 (in the GMAC control register) have a different meaning of what is used for STiH4xx SoCs. So we cannot adopt the same glue for all these SoCs. Moreover, GiGa on STiD127 didn't work and, for all the SoCs, the RGMII couldn't run when the speed was 10Mbps (because the clock was not properly managed). Note that the phy clock needs to be provided by the platform as well as documented in the related binding file (updated as consequence). The old code supported too many configurations never adopted and validated. This made the code very complex to maintain and debug in case of issues. The patch simplifies all the configurations as commented in the tables inside the file and obviously it has been tested on all the boards based on the SoCs mentioned. With this patch, the dwmac-sti is also ready to support new configurations that will be available on next SoC generations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14stmmac: dwmac-sti: review the glue-logic for STi4xx and STiD127 SoCsGiuseppe CAVALLARO2-210/+253
This patch is to review the whole glue logic adopted on STi SoCs that was bugged. In the old glue-logic there was a lot of confusion when setup the retiming especially for STiD127 where, for example, the bits 6 and 7 (in the GMAC control register) have a different meaning of what is used for STiH4xx SoCs. So we cannot adopt the same glue for all these SoCs. Moreover, GiGa on STiD127 didn't work and, for all the SoCs, the RGMII couldn't run when the speed was 10Mbps (because the clock was not properly managed). Note that the phy clock needs to be provided by the platform as well as documented in the related binding file (updated as consequence). The old code supported too many configurations never adopted and validated. This made the code very complex to maintain and debug in case of issues. The patch simplifies all the configurations as commented in the tables inside the file and obviously it has been tested on all the boards based on the SoCs mentioned. With this patch, the dwmac-sti is also ready to support new configurations that will be available on next SoC generations. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14stmmac: make the STi Layer compatible to STiH407Giuseppe CAVALLARO2-2/+3
This adds the missing compatibility to the STiH407 SoC. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14stmmac: platform: fix FIXED_PHY support.Giuseppe CAVALLARO1-5/+10
On several STi platforms: e.g. stihxxx-b2120 an Ethernet switch is embedded and connected to the stmmac via RGMII mode. So this is managed by using the FIXED_PHY. In that case, the support in the platform needs to be fixed to allow the stmmac to dialog with the switch via fixed-link by using phy_bus_name property. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14dsa: mv88e6171: Fix tag_protocol checkGuenter Roeck1-1/+1
tag_protocol is now an enum, so drivers have to check against it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14Merge branch 'xgene'David S. Miller12-21/+506
Iyappan Subramanian says: ==================== Adding SGMII based 1GbE basic support to APM X-Gene SoC ethernet driver. v2: Address comments from v1 * Split the patchset into two, the first one being preparatory patch * Added link_state function pointer to the xgene_mac_ops structure * Added xgene_indirect_ctl structure for indirect read/write arguments v1: * Initial version ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14drivers: net: xgene: Add SGMII based 1GbE ethtool supportIyappan Subramanian1-8/+17
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14drivers: net: xgene: Add SGMII based 1GbE supportIyappan Subramanian7-5/+453
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14drivers: net: xgene: Preparing for adding SGMII based 1GbEIyappan Subramanian6-8/+8
- Added link_state function pointer to the xgene__mac_ops structure - Moved ring manager (pdata->rm) assignment to xgene_enet_setup_ops - Removed unused variable (pdata->phy_addr) and macro (FULL_DUPLEX) Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14dtb: Add SGMII based 1GbE node to APM X-Gene SoC device treeIyappan Subramanian2-0/+28
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14net: filter: move common defines into bpf_common.hAlexei Starovoitov4-55/+58
userspace programs that use eBPF instruction macros need to include two files: uapi/linux/filter.h and uapi/linux/bpf.h Move common macro definitions that are shared between classic BPF and eBPF into uapi/linux/bpf_common.h, so that user app can include only one bpf.h file Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14caif_usb: use target structure member in memsetFabian Frederick1-1/+1
parent cfusbl was used instead of first structure member 'layer' Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14caif_usb: remove redundant memory messageFabian Frederick1-3/+2
Let MM subsystem display out of memory messages. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14caif: replace kmalloc/memset 0 by kzallocFabian Frederick1-2/+2
Also add blank line after declaration Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14drivers: net: cpsw: remove child devices while driver detachMugunthan V N1-0/+10
remove all the child devices from the system to make sure that re-insert of cpsw module doesn't fail on child device populated by of_platform_populate(). Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14drivers: net: davinci_cpdma: remove spinlock as SOFTIRQ-unsafe lock order ↵Mugunthan V N1-4/+0
detected remove spinlock in cpdma_desc_pool_destroy() as there is no active cpdma channel and iounmap should be called without auquiring lock. root@dra7xx-evm:~# modprobe -r ti_cpsw [ 50.539743] [ 50.541312] ====================================================== [ 50.547796] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 50.554826] 3.14.19-02124-g95c5b7b #308 Not tainted [ 50.559939] ------------------------------------------------------ [ 50.566416] modprobe/1921 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 50.573347] (vmap_area_lock){+.+...}, at: [<c01127fc>] find_vmap_area+0x10/0x6c [ 50.581132] [ 50.581132] and this task is already holding: [ 50.587249] (&(&pool->lock)->rlock#2){..-...}, at: [<bf017c74>] cpdma_ctlr_destroy+0x5c/0x114 [davinci_cpdma] [ 50.597766] which would create a new lock dependency: [ 50.603048] (&(&pool->lock)->rlock#2){..-...} -> (vmap_area_lock){+.+...} [ 50.610296] [ 50.610296] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 50.618601] (&(&pool->lock)->rlock#2){..-...} ... which became SOFTIRQ-irq-safe at: [ 50.626829] [<c06585a4>] _raw_spin_lock_irqsave+0x38/0x4c [ 50.632677] [<bf01773c>] cpdma_desc_free.constprop.7+0x28/0x58 [davinci_cpdma] [ 50.640437] [<bf0177e8>] __cpdma_chan_free+0x7c/0xa8 [davinci_cpdma] [ 50.647289] [<bf017908>] __cpdma_chan_process+0xf4/0x134 [davinci_cpdma] [ 50.654512] [<bf017984>] cpdma_chan_process+0x3c/0x54 [davinci_cpdma] [ 50.661455] [<bf0277e8>] cpsw_poll+0x14/0xa8 [ti_cpsw] [ 50.667038] [<c05844f4>] net_rx_action+0xc0/0x1e8 [ 50.672150] [<c0048234>] __do_softirq+0xcc/0x304 [ 50.677183] [<c004873c>] irq_exit+0xa8/0xfc [ 50.681751] [<c000eeac>] handle_IRQ+0x50/0xb0 [ 50.686513] [<c0008638>] gic_handle_irq+0x28/0x5c [ 50.691628] [<c06590a4>] __irq_svc+0x44/0x5c [ 50.696289] [<c0658ab4>] _raw_spin_unlock_irqrestore+0x34/0x44 [ 50.702591] [<c065a9c4>] do_page_fault.part.9+0x144/0x3c4 [ 50.708433] [<c065acb8>] do_page_fault+0x74/0x84 [ 50.713453] [<c00083dc>] do_DataAbort+0x34/0x98 [ 50.718391] [<c065923c>] __dabt_usr+0x3c/0x40 [ 50.723148] [ 50.723148] to a SOFTIRQ-irq-unsafe lock: [ 50.728893] (vmap_area_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 50.736476] ... [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 50.741876] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 50.747908] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 50.754210] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 50.759692] [<c0114be0>] vmap+0x40/0x78 [ 50.763900] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 50.769835] [<c093eac0>] start_kernel+0x320/0x388 [ 50.774952] [<80008074>] 0x80008074 [ 50.778793] [ 50.778793] other info that might help us debug this: [ 50.778793] [ 50.787181] Possible interrupt unsafe locking scenario: [ 50.787181] [ 50.794295] CPU0 CPU1 [ 50.799042] ---- ---- [ 50.803785] lock(vmap_area_lock); [ 50.807446] local_irq_disable(); [ 50.813652] lock(&(&pool->lock)->rlock#2); [ 50.820782] lock(vmap_area_lock); [ 50.827086] <Interrupt> [ 50.829823] lock(&(&pool->lock)->rlock#2); [ 50.834490] [ 50.834490] *** DEADLOCK *** [ 50.834490] [ 50.840695] 4 locks held by modprobe/1921: [ 50.844981] #0: (&__lockdep_no_validate__){......}, at: [<c03e53e8>] driver_detach+0x44/0xb8 [ 50.854038] #1: (&__lockdep_no_validate__){......}, at: [<c03e53f4>] driver_detach+0x50/0xb8 [ 50.863102] #2: (&(&ctlr->lock)->rlock){......}, at: [<bf017c34>] cpdma_ctlr_destroy+0x1c/0x114 [davinci_cpdma] [ 50.873890] #3: (&(&pool->lock)->rlock#2){..-...}, at: [<bf017c74>] cpdma_ctlr_destroy+0x5c/0x114 [davinci_cpdma] [ 50.884871] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 50.892827] -> (&(&pool->lock)->rlock#2){..-...} ops: 167 { [ 50.898703] IN-SOFTIRQ-W at: [ 50.901995] [<c06585a4>] _raw_spin_lock_irqsave+0x38/0x4c [ 50.909476] [<bf01773c>] cpdma_desc_free.constprop.7+0x28/0x58 [davinci_cpdma] [ 50.918878] [<bf0177e8>] __cpdma_chan_free+0x7c/0xa8 [davinci_cpdma] [ 50.927366] [<bf017908>] __cpdma_chan_process+0xf4/0x134 [davinci_cpdma] [ 50.936218] [<bf017984>] cpdma_chan_process+0x3c/0x54 [davinci_cpdma] [ 50.944794] [<bf0277e8>] cpsw_poll+0x14/0xa8 [ti_cpsw] [ 50.952009] [<c05844f4>] net_rx_action+0xc0/0x1e8 [ 50.958765] [<c0048234>] __do_softirq+0xcc/0x304 [ 50.965432] [<c004873c>] irq_exit+0xa8/0xfc [ 50.971635] [<c000eeac>] handle_IRQ+0x50/0xb0 [ 50.978035] [<c0008638>] gic_handle_irq+0x28/0x5c [ 50.984788] [<c06590a4>] __irq_svc+0x44/0x5c [ 50.991085] [<c0658ab4>] _raw_spin_unlock_irqrestore+0x34/0x44 [ 50.999023] [<c065a9c4>] do_page_fault.part.9+0x144/0x3c4 [ 51.006510] [<c065acb8>] do_page_fault+0x74/0x84 [ 51.013171] [<c00083dc>] do_DataAbort+0x34/0x98 [ 51.019738] [<c065923c>] __dabt_usr+0x3c/0x40 [ 51.026129] INITIAL USE at: [ 51.029335] [<c06585a4>] _raw_spin_lock_irqsave+0x38/0x4c [ 51.036729] [<bf017d78>] cpdma_chan_submit+0x4c/0x2f0 [davinci_cpdma] [ 51.045225] [<bf02863c>] cpsw_ndo_open+0x378/0x6bc [ti_cpsw] [ 51.052897] [<c058747c>] __dev_open+0x9c/0x104 [ 51.059287] [<c05876ec>] __dev_change_flags+0x88/0x160 [ 51.066420] [<c05877e4>] dev_change_flags+0x18/0x48 [ 51.073270] [<c05ed51c>] devinet_ioctl+0x61c/0x6e0 [ 51.080029] [<c056ee54>] sock_ioctl+0x5c/0x298 [ 51.086418] [<c01350a4>] do_vfs_ioctl+0x78/0x61c [ 51.092993] [<c01356ac>] SyS_ioctl+0x64/0x74 [ 51.099200] [<c000e580>] ret_fast_syscall+0x0/0x48 [ 51.105956] } [ 51.107696] ... key at: [<bf019000>] __key.21312+0x0/0xfffff650 [davinci_cpdma] [ 51.115912] ... acquired at: [ 51.119019] [<c00899ac>] lock_acquire+0x9c/0x104 [ 51.124138] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.129341] [<c01127fc>] find_vmap_area+0x10/0x6c [ 51.134547] [<c0114960>] remove_vm_area+0x8/0x6c [ 51.139659] [<c0114a7c>] __vunmap+0x20/0xf8 [ 51.144318] [<c001c350>] __arm_iounmap+0x10/0x18 [ 51.149440] [<bf017d08>] cpdma_ctlr_destroy+0xf0/0x114 [davinci_cpdma] [ 51.156560] [<bf026294>] cpsw_remove+0x48/0x8c [ti_cpsw] [ 51.162407] [<c03e62c8>] platform_drv_remove+0x18/0x1c [ 51.168063] [<c03e4c44>] __device_release_driver+0x70/0xc8 [ 51.174094] [<c03e5458>] driver_detach+0xb4/0xb8 [ 51.179212] [<c03e4a6c>] bus_remove_driver+0x4c/0x90 [ 51.184693] [<c00b024c>] SyS_delete_module+0x10c/0x198 [ 51.190355] [<c000e580>] ret_fast_syscall+0x0/0x48 [ 51.195661] [ 51.197217] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 51.205986] -> (vmap_area_lock){+.+...} ops: 520 { [ 51.211032] HARDIRQ-ON-W at: [ 51.214321] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.221090] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 51.228750] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 51.236690] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 51.243811] [<c0114be0>] vmap+0x40/0x78 [ 51.249654] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 51.257239] [<c093eac0>] start_kernel+0x320/0x388 [ 51.263994] [<80008074>] 0x80008074 [ 51.269474] SOFTIRQ-ON-W at: [ 51.272769] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.279525] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 51.287190] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 51.295126] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 51.302245] [<c0114be0>] vmap+0x40/0x78 [ 51.308094] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 51.315669] [<c093eac0>] start_kernel+0x320/0x388 [ 51.322423] [<80008074>] 0x80008074 [ 51.327906] INITIAL USE at: [ 51.331112] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.337775] [<c011376c>] alloc_vmap_area.isra.28+0xb8/0x300 [ 51.345352] [<c0113a44>] __get_vm_area_node.isra.29+0x90/0x134 [ 51.353197] [<c011486c>] get_vm_area_caller+0x3c/0x48 [ 51.360224] [<c0114be0>] vmap+0x40/0x78 [ 51.365977] [<c09442f0>] check_writebuffer_bugs+0x54/0x1a0 [ 51.373464] [<c093eac0>] start_kernel+0x320/0x388 [ 51.380131] [<80008074>] 0x80008074 [ 51.385517] } [ 51.387260] ... key at: [<c0a66948>] vmap_area_lock+0x10/0x20 [ 51.393841] ... acquired at: [ 51.396945] [<c00899ac>] lock_acquire+0x9c/0x104 [ 51.402060] [<c06584e8>] _raw_spin_lock+0x28/0x38 [ 51.407266] [<c01127fc>] find_vmap_area+0x10/0x6c [ 51.412478] [<c0114960>] remove_vm_area+0x8/0x6c [ 51.417592] [<c0114a7c>] __vunmap+0x20/0xf8 [ 51.422252] [<c001c350>] __arm_iounmap+0x10/0x18 [ 51.427369] [<bf017d08>] cpdma_ctlr_destroy+0xf0/0x114 [davinci_cpdma] [ 51.434487] [<bf026294>] cpsw_remove+0x48/0x8c [ti_cpsw] [ 51.440336] [<c03e62c8>] platform_drv_remove+0x18/0x1c [ 51.446000] [<c03e4c44>] __device_release_driver+0x70/0xc8 [ 51.452031] [<c03e5458>] driver_detach+0xb4/0xb8 [ 51.457147] [<c03e4a6c>] bus_remove_driver+0x4c/0x90 [ 51.462628] [<c00b024c>] SyS_delete_module+0x10c/0x198 [ 51.468289] [<c000e580>] ret_fast_syscall+0x0/0x48 [ 51.473584] [ 51.475140] [ 51.475140] stack backtrace: [ 51.479703] CPU: 0 PID: 1921 Comm: modprobe Not tainted 3.14.19-02124-g95c5b7b #308 [ 51.487744] [<c0016090>] (unwind_backtrace) from [<c0012060>] (show_stack+0x10/0x14) [ 51.495865] [<c0012060>] (show_stack) from [<c0652a20>] (dump_stack+0x78/0x94) [ 51.503444] [<c0652a20>] (dump_stack) from [<c0086f18>] (check_usage+0x408/0x594) [ 51.511293] [<c0086f18>] (check_usage) from [<c00870f8>] (check_irq_usage+0x54/0xb0) [ 51.519416] [<c00870f8>] (check_irq_usage) from [<c0088724>] (__lock_acquire+0xe54/0x1b90) [ 51.528077] [<c0088724>] (__lock_acquire) from [<c00899ac>] (lock_acquire+0x9c/0x104) [ 51.536291] [<c00899ac>] (lock_acquire) from [<c06584e8>] (_raw_spin_lock+0x28/0x38) [ 51.544417] [<c06584e8>] (_raw_spin_lock) from [<c01127fc>] (find_vmap_area+0x10/0x6c) [ 51.552726] [<c01127fc>] (find_vmap_area) from [<c0114960>] (remove_vm_area+0x8/0x6c) [ 51.560935] [<c0114960>] (remove_vm_area) from [<c0114a7c>] (__vunmap+0x20/0xf8) [ 51.568693] [<c0114a7c>] (__vunmap) from [<c001c350>] (__arm_iounmap+0x10/0x18) [ 51.576362] [<c001c350>] (__arm_iounmap) from [<bf017d08>] (cpdma_ctlr_destroy+0xf0/0x114 [davinci_cpdma]) [ 51.586494] [<bf017d08>] (cpdma_ctlr_destroy [davinci_cpdma]) from [<bf026294>] (cpsw_remove+0x48/0x8c [ti_cpsw]) [ 51.597261] [<bf026294>] (cpsw_remove [ti_cpsw]) from [<c03e62c8>] (platform_drv_remove+0x18/0x1c) [ 51.606659] [<c03e62c8>] (platform_drv_remove) from [<c03e4c44>] (__device_release_driver+0x70/0xc8) [ 51.616237] [<c03e4c44>] (__device_release_driver) from [<c03e5458>] (driver_detach+0xb4/0xb8) [ 51.625264] [<c03e5458>] (driver_detach) from [<c03e4a6c>] (bus_remove_driver+0x4c/0x90) [ 51.633749] [<c03e4a6c>] (bus_remove_driver) from [<c00b024c>] (SyS_delete_module+0x10c/0x198) [ 51.642781] [<c00b024c>] (SyS_delete_module) from [<c000e580>] (ret_fast_syscall+0x0/0x48) Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14drivers: net: davinci_cpdma: remove kfree on objects allocated with devm_* apisMugunthan V N1-1/+0
memories allocated with devm_* apis must not be freed with kfree apis, so removing the kfree calls Fixes: e194312854ed ('drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc().') Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14tg3: Add skb->xmit_more supportPrashant Sreedharan1-4/+6
Ring TX doorbell only if xmit_more is not set or the queue is stopped. Suggested-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 13:59:19 +0000