summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-11-16[media] v4l: omap3isp: Use dma_request_chan_by_mask() to request the DMA channelPeter Ujfalusi1-13/+15
When requesting the DMA channel it was mandatory that we do not have DMA resource nor valid DMA channel via DT. In this case the dma_request_slave_channel_compat() would fall back and request any channel with SW trigger. The same can be achieved with the dma_request_chan_by_mask() without the misleading use of the DMAengine API - implying that the omap3isp does need to have DMA resource or valid dma binding in DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: omap3isp: Fix OF node double put when parsing OF graphLaurent Pinchart1-10/+9
When parsing the graph the driver loops over all endpoints using of_graph_get_next_endpoint(). The function handles reference counting of the passed and returned nodes, so the returned node's reference count must not be decreased manually in the normal path. Move the offending of_node_put() call to the error path that requires manual reference count handling. Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] uvcvideo: add support for Oculus Rift SensorPhilipp Zabel1-0/+9
The Rift CV1 Sensor has bInterfaceClass set to vendor specific, so we need an entry in uvc_ids to probe it. Just as the Rift DK2 IR tracker, it misreports the pixel format as YUYV instead of Y8. The sensor is configured with a low exposure time and high black level by default, so that only bright IR sources can be seen. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec-ioc-adap-g-log-addrs.rst: describe CEC_LOG_ADDRS_FL_CDC_ONLYMauro Carvalho Chehab1-0/+9
The CEC_LOG_ADDRS_FL_CDC_ONLY flag is missing at the documentation, causing this warning: Documentation/output/cec.h.rst:6: WARNING: undefined label: cec-log-addrs-fl-cdc-only (if the link has no caption the label must precede a section header) Add a documentation for it, based on the commit that introduced the flag. Fixes: a69a168a1bd4 ("[media] cec: add proper support for CDC-Only CEC devices") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: zero counters in cec_received_msg()Hans Verkuil1-0/+4
Make sure the TX counters are zeroed in the cec_msg struct. Non-zero TX counters make no sense when a message is received, and applications should not see non-zero values here. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] MAINTAINERS: update pathsHans Verkuil1-5/+5
The cec framework and the pulse8-cec driver have been moved out of staging, so update the MAINTAINERS paths. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] s5p-cec/st-cec: update TODOsHans Verkuil2-6/+13
Update the TODOs explaining why these two drivers remain in staging. The reason is that these drivers rely on userspace to set the physical address, but that should come from the HDMI output driver. This in turn needs the upcoming HDMI notifier framework. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] pulse8-cec: move out of stagingHans Verkuil8-55/+6
Now that the CEC framework has been moved out of staging and into the mainline kernel we can do the same for the pulse8-cec driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: an inner loop clobbered the outer loop variableHans Verkuil1-4/+5
An inner for-loop reused the outer loop variable. This was only noticeable with CEC adapters supporting more than one logical address. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec.h/cec-funcs.h: don't use bool in public headersHans Verkuil2-53/+54
Replace bool by int or __u8 (when used in a struct). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: sanitize msg.flagsHans Verkuil2-1/+5
The CEC_MSG_FL_REPLY_TO_FOLLOWERS message flag only makes sense for transmitted messages where you want to wait for the reply. Clear the flag in all other cases. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: move the CEC framework out of staging and to mediaHans Verkuil21-46/+32
The last open issues have been addressed, so it is time to move this out of staging and into the mainline and to move the public cec headers to include/uapi/linux. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: add proper support for CDC-Only CEC devicesHans Verkuil4-6/+90
CDC-Only CEC devices are CEC devices that can only handle CDC messages, all other messages are ignored. Add a flag to signal that this is a CDC-Only device and act accordingly. Also add helper functions to identify if a CEC device is configured as a CDC-Only device, a second TV, a switch or a processor, since these variations cannot be determined by the logical address alone. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: accept two replies for CEC_MSG_INITIATE_ARCHans Verkuil3-14/+21
The CEC_MSG_INITIATE_ARC message is special since it is the ONLY CEC message that accepts two possible valid replies: CEC_MSG_REPORT_ARC_INITIATED and CEC_MSG_REPORT_ARC_TERMINATED. So if the transmitted message is CEC_MSG_INITIATE_ARC and the remote side replied with CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED, then a msg->reply value of CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED will match either reply. I thought about either adding a second reply2 field, but that's ugly for all other messages that have only one reply, and what if in the future a new message is added that can have three replies? Another option would be to add a cec_msg flag, but really, the combination of CEC_MSG_REPORT_ARC_INITIATED and a reply value of one of the two possible replies already functions as a flag. Another advantage of this approach is that it is safe to re-use a cec_msg struct. No need to zero a flags field or a reply2 field. So since this really is an exception in the CEC specification, I decided to implement it as an exception as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: filter invalid messagesHans Verkuil1-2/+155
As per the CEC specification: - CEC messages with a too-small payload should be ignored. - Broadcast messages that are only allowed as directed messages should be ignored. - Directed messages that are only allowed as broadcast messages should be ignored. Implement this in the core CEC framework. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: add CEC_MSG_FL_REPLY_TO_FOLLOWERSHans Verkuil5-9/+29
Give the caller more control over how replies to a transmit are handled. By default the reply will only go to the filehandle that called CEC_TRANSMIT. If this new flag is set, then the reply will also go to all followers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: add flag to cec_log_addrs to enable RC passthroughHans Verkuil5-5/+18
By default the CEC_MSG_USER_CONTROL_PRESSED/RELEASED messages are passed on to the follower(s) only. If the new CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU flag is set in the flags field of struct cec_log_addrs then these messages are also passed on to the remote control input subsystem and they will appear as keystrokes. This used to be the default behavior, but now you have to explicitly enable it. This is done to force the caller to think about possible security issues (e.g. if these messages are used to enter passwords). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec rst: convert tables and drop the 'row' commentsHans Verkuil5-945/+579
This uses Laurent's python script to convert all tables, dropping the useless 'row' comments. See commit c2b66cafdf02 ("[media] v4l: doc: Remove row numbers from tables") for the script that was used. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] pulse8-cec: set all_device_types when restoring configHans Verkuil1-0/+8
When the persistent state is restored, the all_device_types field was never filled in. Fix this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cobalt: fix copy-and-paste errorHans Verkuil1-1/+1
The vmr_stat variable was filled with the contents of the control register, not the status register. Classic copy-and-paste error. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] mtk-vcodec: add index check in decoder vidioc_qbufWu-Cheng Li1-0/+4
vb2_qbuf will check the buffer index. If a driver overrides vidioc_qbuf and use the buffer index, the driver needs to check the index. Signed-off-by: Wu-Cheng Li <wuchengli@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] control.rst: improve the queryctrl code examplesHans Verkuil1-33/+55
The code examples on how to enumerate controls were really long in the tooth. Update them. Using FLAG_NEXT_CTRL is preferred these days, so give that example first. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec-core.rst: improve documentationHans Verkuil1-6/+18
Improve the internal CEC documentation. In particular add a section that specifies that transmit-related interrupts should be processed before receive interrupts. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] DaVinci-VPFE-Capture: Replace a memcpy() call by an assignment in ↵Markus Elfring1-1/+1
vpfe_enum_input() Use a direct assignment for an array element which can be set over the pointer variable "inp" instead of calling the function "memcpy" here. Suggested-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] DaVinci-VPBE: Check return value of a setup_if_config() call in ↵Markus Elfring1-3/+1
vpbe_set_output() * A function was called over the pointer "setup_if_config" in the data structure "venc_platform_data". But the return value was not used so far. Thus assign it to the local variable "ret" which will be checked with the next statement. Fixes: 9a7f95ad1c946efdd7a7a72df27db738260a0fd8 ("[media] davinci vpbe: add dm365 VPBE display driver changes") * Pass a value to this function call without storing it in an intermediate variable before. * Delete the local variable "if_params" which became unnecessary with this refactoring. Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] staging: st-cec: add parentheses around complex macrosManinder Singh1-2/+2
This patch fixes the following checkpatch.pl error: ERROR: Macros with complex values should be enclosed in parentheses Signed-off-by: Maninder Singh <maninder.s2@samsung.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] adv7604: add vic detectHans Verkuil1-2/+16
Obtain the correct timings based on the VIC code from the AVI InfoFrame. It does a sanity check to see if at least the measured width and height are in line with what the VIC code reports. If not, then use the timings instead of the VIC code (as per the CEA-861 spec). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cobalt: add cropcap supportHans Verkuil1-0/+21
Now that the timings contain picture aspect ratio information, we can support cropcap to return the pixel aspect ratio. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l2-dv-timings: add helpers for vic and pixelaspect ratioHans Verkuil3-3/+77
Add a helper to find timings based on the CEA-861 VIC code. Also, add a helper that returns the pixel aspect ratio based on the v4l2_dv_timings struct. [mchehab@s-opensource.com: fix coding style] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l2-dv-timings: add VICs and picture aspect ratioHans Verkuil1-34/+63
Add the CEA-861 VIC, the HDMI VIC and the picture aspect ratio information where applicable. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] vidioc-g-dv-timings.rst: document the new dv_timings flagsHans Verkuil2-0/+14
Document the new flags. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] videodev2.h: add VICs and picture aspect ratioHans Verkuil1-2/+25
Add picture aspect ratio information, the CEA-861 VIC (Video Identification Code) and the HDMI VIC to struct v4l2_bt_timings. The picture aspect was chosen rather than the pixel aspect since 1) the CEA-861 standard uses picture aspect, and 2) pixel aspect ratio can become tricky when dealing with pixel repeat timings. While we don't support those yet at the moment, this might become necessary. And in that case using picture aspect ratio makes more sense. And converting picture aspect ratio to pixel aspect ratio is easy enough. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] videodev2.h: checkpatch cleanupHans Verkuil1-20/+30
Format comments according to what checkpatch wants. No other changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] hdpvr: fix interrupted recordingJonathan Sims1-3/+19
This is a reworking of a patch originally submitted by Ryley Angus, modified by Hans Verkuil and then seemingly forgotten before changes suggested by Keith Pyle here: http://www.mail-archive.com/linux-media@vger.kernel.org/msg75163.html were made and tested. I have implemented the suggested changes and have been testing for the last 2 months. I am no longer experiencing lockups while recording (with blue light on, requiring power cycling) which had been a long standing problem with the HD-PVR. I have not noticed any other problems since applying the patch. Signed-off-by: Jonathan Sims <jonathan.625266@earthlink.net> Reported-by: Ryley Angus <ryleyjangus@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: Document that m2m devices have a file handle specific contextSakari Ailus2-1/+4
Memory-to-memory V4L2 devices all have file handle specific context. Say this in the API documentation so that the user space may rely on it being the case. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] st-hva: fix a copy-and-paste variable name errorColin Ian King1-1/+1
The second check for an error on hva->lmi_err_reg appears to be a copy-and-paste error, it should be hva->emi_err_reg instead. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] squash lines for simple wrapper functionsMasahiro Yamada10-60/+20
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] s5p-cec: remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] media: fix platform_no_drv_owner.cocci warningsFengguang Wu1-1/+0
drivers/media/platform/mtk-mdp/mtk_mdp_core.c:284:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] media: mtk-mdp: NULL-terminate mtk_mdp_comp_dt_idsVincent Stehlé1-1/+2
The mtk_mdp_comp_dt_ids[] array should be NULL-terminated; add therefore an empty entry in the end. Fixes: c8eb2d7e8202fd9c ("[media] media: Add Mediatek MDP Driver") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] media: solo6x10: fix lockup by avoiding delayed register writeAndrey Utkin1-0/+3
This fixes a lockup at device probing which happens on some solo6010 hardware samples. This is a regression introduced by commit e1ceb25a1569 ("[media] SOLO6x10: remove unneeded register locking and barriers") The observed lockup happens in solo_set_motion_threshold() called from solo_motion_config(). This extra "flushing" is not fundamentally needed for every write, but apparently the code in driver assumes such behaviour at last in some places. Actual fix was proposed by Hans Verkuil. Fixes: e1ceb25a1569 ("[media] SOLO6x10: remove unneeded register locking and barriers") Cc: stable@vger.kernel.org # 4.3 and up Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: doc: Fix typo in vidioc-g-tuner.rstMasanari Iida1-2/+2
This patch fix spelling typos found in vidioc-g-tuner.rst Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] st-cec: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/staging/media//st-cec/stih-cec.ko | grep alias $ After this patch: $ modinfo drivers/staging/media//st-cec/stih-cec.ko | grep alias alias: of:N*T*Cst,stih-cecC* alias: of:N*T*Cst,stih-cec Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] s5p-cec: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/staging/media/s5p-cec/s5p-cec.ko | grep alias $ After this patch: $ modinfo drivers/staging/media/s5p-cec/s5p-cec.ko | grep alias alias: of:N*T*Csamsung,s5p-cecC* alias: of:N*T*Csamsung,s5p-cec Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] rc: meson-ir: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/media/rc/meson-ir.ko | grep alias $ After this patch: $ modinfo drivers/media/rc/meson-ir.ko | grep alias alias: of:N*T*Camlogic,meson-gxbb-irC* alias: of:N*T*Camlogic,meson-gxbb-ir alias: of:N*T*Camlogic,meson8b-irC* alias: of:N*T*Camlogic,meson8b-ir alias: of:N*T*Camlogic,meson6-irC* alias: of:N*T*Camlogic,meson6-ir Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: rcar-fcp: Fix module autoload for OF registrationJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/media/platform/rcar-fcp.ko | grep alias alias: rcar-fcp After this patch: $ modinfo drivers/media/platform/rcar-fcp.ko | grep alias alias: rcar-fcp alias: of:N*T*Crenesas,fcpvC* alias: of:N*T*Crenesas,fcpv alias: of:N*T*Crenesas,fcpfC* alias: of:N*T*Crenesas,fcpf Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] v4l: vsp1: Fix module autoload for OF registrationJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/media/platform/vsp1/vsp1.ko | grep alias alias: vsp1 After this patch: $ modinfo drivers/media/platform/vsp1/vsp1.ko | grep alias alias: vsp1 alias: of:N*T*Crenesas,vsp2C* alias: of:N*T*Crenesas,vsp2 alias: of:N*T*Crenesas,vsp1C* alias: of:N*T*Crenesas,vsp1 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] usbtv: don't do DMA on stackMauro Carvalho Chehab1-5/+13
As reported by smatch: drivers/media/usb/usbtv/usbtv-video.c:716 usbtv_s_ctrl() error: doing dma on the stack (data) drivers/media/usb/usbtv/usbtv-video.c:758 usbtv_s_ctrl() error: doing dma on the stack (data) We should not do it, as it won't work on Kernels 4.9 and upper. So, alloc a buffer for it. Fixes: c53a846c48f2 ("[media] usbtv: add video controls") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] usbtv: add video controlsLubomir Rintel2-1/+99
Brightness, Contrast, Hue and Color Saturation are supported. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] st-hva: fix some error handling in hva_hw_probe()Dan Carpenter1-3/+3
The devm_ioremap_resource() returns error pointers, never NULL. The platform_get_resource() returns NULL on error, never error pointers. The error code needs to be set, as well. The current code returns PTR_ERR(NULL) which is success. Fixes: 57b2c0628b60 ("[media] st-hva: multi-format video encoder V4L2 driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-10 09:54:27 +0000