summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2007-02-20[PATCH] fb: SM501 framebuffer driverBen Dooks3-0/+1805
Driver for the Silicon Motion SM501 multifunction device framebuffer subsystem. This driver supports both the CRT and LCD panel heads, with some simple acceleration for the cursor plotting and support for screen panning. There is no current support for bitblt/drawing engines, which should be added at a later date. This has been tested on a number of configurations, including PCI and generic-bus, on PPC, ARM and SH4 [akpm@linux-foundation.org: fix warnings] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.u.> Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] GPIO API: SA1100 wrapper cleanupPhilipp Zabel2-20/+44
Based on the discussion last december (http://lkml.org/lkml/2006/12/20/241), this patch - adds gpio_direction_input/output functions to generic.c instead of making them inline, - fixes comment and includes and uses inline functions instead of macros in gpio.h Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] GPIO API: S3C2410 wrapper cleanupPhilipp Zabel1-10/+11
this one adds an #include <asm/arch/regs-gpio.h>. Tested by Roman Moravcik on s3c2440. Based on the discussion last december (http://lkml.org/lkml/2006/12/20/243), this patch - fixes comment and includes in gpio.h - adds the gpio_to_irq definition for S3C2400 - includes asm/arch/regs-gpio.h for pin direction definitions Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] spi_s3c2410_gpio.c spi mode 2 and 3 supportHarald Welte1-0/+15
Add transfer modes 2 and 3 to the S3C24XX gpio SPI driver Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] SPI controller build/warning fixesDavid Brownell3-5/+8
The signature of the per-device cleanup() routine changed to remove its const-ness. Three new SPI controller drivers now need that change, to eliminate build warnings. This also fixes a build bug with atmel_spi on AT91 systems. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] parport_pc: fix parport_pc_probe_port section warningJean Delvare1-3/+3
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text between 'parport_pc_probe_port' (at offset 0x14f7) and 'parport_pc_unregister_port' parport_dma_probe() cannot be declared __devinit as it is called from parport_pc_probe_port() which isn't. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] lockdep: annotate BLKPG_DEL_PARTITIONPeter Zijlstra2-1/+8
>============================================= >[ INFO: possible recursive locking detected ] >2.6.19-1.2909.fc7 #1 >--------------------------------------------- >anaconda/587 is trying to acquire lock: > (&bdev->bd_mutex){--..}, at: [<c05fb380>] mutex_lock+0x21/0x24 > >but task is already holding lock: > (&bdev->bd_mutex){--..}, at: [<c05fb380>] mutex_lock+0x21/0x24 > >other info that might help us debug this: >1 lock held by anaconda/587: > #0: (&bdev->bd_mutex){--..}, at: [<c05fb380>] mutex_lock+0x21/0x24 > >stack backtrace: > [<c0405812>] show_trace_log_lvl+0x1a/0x2f > [<c0405db2>] show_trace+0x12/0x14 > [<c0405e36>] dump_stack+0x16/0x18 > [<c043bd84>] __lock_acquire+0x116/0xa09 > [<c043c960>] lock_acquire+0x56/0x6f > [<c05fb1fa>] __mutex_lock_slowpath+0xe5/0x24a > [<c05fb380>] mutex_lock+0x21/0x24 > [<c04d82fb>] blkdev_ioctl+0x600/0x76d > [<c04946b1>] block_ioctl+0x1b/0x1f > [<c047ed5a>] do_ioctl+0x22/0x68 > [<c047eff2>] vfs_ioctl+0x252/0x265 > [<c047f04e>] sys_ioctl+0x49/0x63 > [<c0404070>] syscall_call+0x7/0xb Annotate BLKPG_DEL_PARTITION's bd_mutex locking and add a little comment clarifying the bd_mutex locking, because I confused myself and initially thought the lock order was wrong too. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] drivers/isdn/gigaset/: build asyncdata.o into the gigaset moduleAdrian Bunk2-3/+5
LD drivers/isdn/gigaset/built-in.o drivers/isdn/gigaset/ser_gigaset.o: In function `gigaset_m10x_send_skb': (.text+0xe50): multiple definition of `gigaset_m10x_send_skb' drivers/isdn/gigaset/usb_gigaset.o:(.text+0x0): first defined here drivers/isdn/gigaset/ser_gigaset.o: In function `gigaset_m10x_input': (.text+0x1121): multiple definition of `gigaset_m10x_input' drivers/isdn/gigaset/usb_gigaset.o:(.text+0x2d1): first defined here make[4]: *** [drivers/isdn/gigaset/built-in.o] Error 1 Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] remove modpost false warnings on ARMDavid Brownell1-8/+28
This patch stops "modpost" from issuing erroneous modpost warnings on ARM builds, which it's been doing since since maybe last summer. A canonical example would be driver method table entries: WARNING: <path> - Section mismatch: reference to .exit.text:<name>_remove from .data after '$d' (at offset 0x4) That "$d" symbol is generated by tools conformant with ARM ABI specs; in this case it's a symbol **in the middle of** a "<name>_driver" struct. The erroneous warnings appear to be issued because "modpost" whitelists references from "<name>_driver" data into init and exit sections ... but doesn't know should also include those "$d" mapping symbols, which are not otherwise associated with "<name>_driver" symbols. This patch prevents the modpost symbol lookup code from ever returning those mapping symbols, so it will return a whitelisted symbol instead. Then things work as expected. Now to revert various code-bloating "fixes" that got merged because of this modpost bug.... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] GPIO API: PXA wrapper cleanupPhilipp Zabel3-19/+63
Based on the discussion last december (http://lkml.org/lkml/2006/12/20/242), this patch: - moves the PXA_LAST_GPIO check into pxa_gpio_mode - fixes comment and includes in gpio.h - replaces the gpio_set/get_value macros with inline functions and adds a non-inline version to avoid code explosion when gpio is not a constant. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] at91_rtc updatesDavid Brownell1-6/+13
Various bug fixes to the at91rm9200 RTC: - alarm: setalarm() should pay attention to the "enabled" flag - init: cleaner handling of the wakeup flags, which cpu init should really have set up. Doing it here is just a workaround. - linkage: since the at91_rtc driver probe() routine is in the init section, it should use platform_driver_probe() instead of leaving that pointer around in the driver struct after init section removal. - linkage: likewise, remove() belongs in the exit section. Among other things, the init and alarm changes ensure that this driver handles the new sysfs "wakealarm" attribute properly. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] rtc-sa1100 rtc_wklarm.enabled bugfixesDavid Brownell1-5/+7
Some rtc-sa1100 bugfixes: - The read_alarm() method reports the rtc_wkalrm.enabled field properly. This patch is already in the handhelds.org tree. - And the set_alarm() method now handles that flag correctly, rather than making mismatched {en,dis}able_irq_wake() calls, which trigger runtime warning messages. (Those calls are best made in suspend/resume methods.) Note that while this SA1100/PXA RTC is fully capable of waking those ARM processors from sleep states, that mechanism isn't properly supported on either processor family, or in this driver. Some boards have board-specific PM glue providing partial workarounds for the weak generic PM support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] update Doc/oops-tracing.txt for TAINT_USERRandy Dunlap1-0/+6
Add TAINT_USER description to Tainted flags in oops-tracing.txt. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] Missing __user in pointer referenced within copy_from_userGlauber de Oliveira Costa1-1/+1
Pointers to user data should be marked with a __user hint. This one is missing. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] genalloc warning fixesAndrew Morton1-2/+2
lib/genalloc.c: In function 'gen_pool_alloc': lib/genalloc.c:151: warning: passing argument 2 of '__set_bit' from incompatible pointer type lib/genalloc.c: In function 'gen_pool_free': lib/genalloc.c:190: warning: passing argument 2 of '__clear_bit' from incompatible pointer type Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] affs: implement ->drop_inodeChristoph Hellwig3-6/+13
affs wants to truncate the inode when the last user goes away, currently it does that through a potentially racy i_count check in ->put_inode. But we already have a method that's called just after the we dropped the last reference, ->drop_inode. This patch implements affs_drop_inode to take advantage of this. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] autofs4: check for directory re-create in lookupIan Kent1-4/+19
This problem was identified and fixed some time ago by Jeff Moyer but it fell through the cracks somehow. It is possible that a user space application could remove and re-create a directory during a request. To avoid returning a failure from lookup incorrectly when our current dentry is unhashed we need to check if another positive, hashed dentry matching this one exists and if so return it instead of a fail. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] autofs4: fix another race between mount and expireIan Kent3-23/+161
Jeff Moyer has identified a race between mount and expire. What happens is that during an expire the situation can arise that a directory is removed and another lookup is done before the expire issues a completion status to the kernel module. In this case, since the the lookup gets a new dentry, it doesn't know that there is an expire in progress and when it posts its mount request, matches the existing expire request and waits for its completion. ENOENT is then returned to user space from lookup (as the dentry passed in is now unhashed) without having performed the mount request. The solution used here is to keep track of dentrys in this unhashed state and reuse them, if possible, in order to preserve the flags. Additionally, this infrastructure will provide the framework for the reintroduction of caching of mount fails removed earlier in development. Signed-off-by: Ian Kent <raven@themaw.net> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] autofs4: header file updateIan Kent2-8/+20
The current header file definitions for autofs version 5 have caused a couple of problems for application builds downstream. This fixes the problem by separating the definitions. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fs: fix nobh data leakNick Piggin1-18/+3
nobh_prepare_write leaks data similarly to how simple_prepare_write did. Fix by not marking the page uptodate until nobh_commit_write time. Again, this could break weird use-cases, but none appear to exist in the tree. We can safely remove the set_page_dirty, because as the comment says, nobh_commit_write does set_page_dirty. If a filesystem wants to allocate backing store for a page dirtied via mmap, page_mkwrite is the suggested approach. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fs: fix libfs data leakNick Piggin2-2/+8
simple_prepare_write leaks uninitialised kernel data. This happens because the it leaves an uninitialised "hole" over the part of the page that the write is expected to go to. This is fine, but it then marks the page uptodate, which means a concurrent read can come in and copy the uninitialised memory into userspace before it written to. Fix it by simply marking it uptodate in simple_commit_write instead, after the hole has been filled in. This could theoretically break an fs that uses simple_prepare_write and not simple_commit_write, and that relies on the incorrect simple_prepare_write behaviour. Luckily, none of those exists in the tree. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] loosen dependancy on rtc cmosDave Jones1-1/+1
This option is useful for all of the X86 subarchs afaik (and especially X86_GENERICARCH). Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] PPC64 Kdump documentation updateSimon Horman1-11/+13
Patch from Mohan Kumar M to add the ppc64 portions of the kdump documentation. http://thread.gmane.org/gmane.linux.kernel/481689/focus=3375 Cc: Mohan Kumar M <mohan@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Simon Horman <horms@verge.net.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] Update OSDL/Linux-Foundation maintainer addressesSimon Horman1-8/+8
The patch below updates MAINTAIER address Individuals (Only Andrew :): osdl.org -> linux-foundation.org Lists: osdl.org -> lists.osdl.org I assume the latter will change at some stage, but at least with this change the osdl/linux-foundation lists are consistent. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] 8250: Fix GCC4 signed/unsigned mismatch warningThomas Koeller1-1/+1
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] cdrom: use unsigned bitfieldsRandy Dunlap1-1/+1
Fix 23 of these sparse warnings on x86_64 allmodconfig: include/linux/cdrom.h:942:19: error: dubious bitfield without explicit `signed' or `unsigned' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] tty: use NULL for ptrsRandy Dunlap1-1/+1
Fix sparse warning in tty_io: drivers/char/tty_io.c:1536:34: warning: Using plain integer as NULL pointer Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] kernel-doc: include struct short description in title outputRandy Dunlap1-2/+2
Output of a function or struct in html mode needs to include the short description from the function/struct name line in the output title line. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] mfd: SM501 core driverBen Dooks5-0/+1691
This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] lockdep: debug_locks check after check_chain_keyJarek Poplawski1-0/+4
In __lock_acquire check_chain_key can turn off debug_locks, so check is needed to assure proper return code. Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] cfag12864b: fix crash when built-in and no parport presentMiguel Ojeda5-1/+48
The problem comes when ks0108/cfag12864b are built-in and no parallel port is present. ks0108_init() is called first, as it should be, but fails to load (as there is no parallel port to use). After that, cfag12864b_init() gets called, without knowing anything about ks0108 failed, and calls ks0108_writecontrol(), which dereferences an uninitialized pointer. Init order is OK, I think. The problem is how to stop cfag12864b_init() being called if ks0108 failed to load. modprobe does it for us, but, how when built-in? Signed-off-by: Miguel Ojeda Sandonis <maxextreme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] ext[234]: update documentationAneesh Kumar K.V3-3/+3
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] mwave: interesting flags savingsAlexey Dobriyan1-2/+12
Flags from spin_lock_irqsave() are saved into global variable and restored from it. My gut feeling this is very racy. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] pktcdvd: Correctly set cmd_len field in pkt_generic_packetGerhard Dirschl1-1/+1
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7810 - a silly copy-paste bug introduced by the latest change. Signed-off-by: Gerhard Dirschl <gd@spherenet.de> Cc: Peter Osterlund <petero2@telia.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fault injection: split up stacktrace filter Kconfig optionAkinobu Mita2-22/+29
There is no prompt for CONFIG_STACKTRACE, so FAULT_INJECTION cannot be selected without LOCKDEP enabled. (found by Paolo 'Blaisorblade' Giarrusso) In order to fix such broken Kconfig dependency, this patch splits up the stacktrace filter support for fault injection by new Kconfig option, which enables to use fault injection on the architecture which doesn't have general stacktrace support. Cc: "Paolo 'Blaisorblade' Giarrusso" <blaisorblade@yahoo.it> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] FAT: DIO-write fallback to normal bufferedOGAWA Hirofumi1-1/+3
If the DIO write on FAT is expanding the size, it will be fail by -EINVAL, because FAT can't handle it now. This patch fallback it to the normal buffered-write and would return success. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] kprobes: list all active probes in the systemSrinivasa Ds1-2/+111
This patch lists all active probes in the system by scanning through kprobe_table[]. It takes care of aggregate handlers and prints the type of the probe. Letter "k" for kprobes, "j" for jprobes, "r" for kretprobes. It also lists address of the instruction,its symbolic name(function name + offset) and the module name. One can access this file through /sys/kernel/debug/kprobes/list. Output looks like this ===================== llm40:~/a # cat /sys/kernel/debug/kprobes/list c0169ae3 r sys_read+0x0 c0169ae3 k sys_read+0x0 c01694c8 k vfs_write+0x0 c0167d20 r sys_open+0x0 f8e658a6 k reiserfs_delete_inode+0x0 reiserfs c0120f4a k do_fork+0x0 c0120f4a j do_fork+0x0 c0169b4a r sys_write+0x0 c0169b4a k sys_write+0x0 c0169622 r vfs_read+0x0 ================================= [akpm@linux-foundation.org: cleanup] [ananth@in.ibm.com: sparc build fix] Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fs: fix __block_write_full_page error case buffer submissionNick Piggin1-1/+1
Andrew noticed that unlocking the page before submitting all buffers for writeout could cause problems if the IO completes before we've finished messing around with the page buffers, and they subsequently get freed. Even if there were no bug, it is a good idea to bring the error case into line with the common case here. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] shm: make sysv ipc shared memory use stacked filesEric W. Biederman1-85/+155
The current ipc shared memory code runs into several problems because it does not quite use files like the rest of the kernel. With the option of backing ipc shared memory with either hugetlbfs or ordinary shared memory the problems got worse. With the added support for ipc namespaces things behaved so unexpected that we now have several bad namespace reference counting bugs when using what appears at first glance to be a reasonable idiom. So to attack these problems and hopefully make the code more maintainable this patch simply uses the files provided by other parts of the kernel and builds it's own files out of them. The shm files are allocated in do_shmat and freed when their reference count drops to zero with their last unmap. The file and vm operations that we don't want to implement or we don't implement completely we just delegate to the operations of our backing file. This means that we now get an accurate shm_nattch count for we have a hugetlbfs inode for backing store, and the shm accounting of last attach and last detach time work as well. This means that getting a reference to the ipc namespace when we create the file and dropping the referenece in the release method is now safe and correct. This means we no longer need a special case for clearing VM_MAYWRITE as our file descriptor now only has write permissions when we have requested write access when calling shmat. Although VM_SHARED is now cleared as well which I believe is harmless and is mostly likely a minor bug fix. By using the same set of operations for both the hugetlb case and regular shared memory case shmdt is not simplified and made slightly more correct as now the test "vma->vm_ops == &shm_vm_ops" is 100% accurate in spotting all shared memory regions generated from sysvipc shared memory. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] slab: reduce size of alien cache to cover only possible nodesChristoph Lameter2-2/+2
The alien cache is a per cpu per node array allocated for every slab on the system. Currently we size this array for all nodes that the kernel does support. For IA64 this is 1024 nodes. So we allocate an array with 1024 objects even if we only boot a system with 4 nodes. This patch uses "nr_node_ids" to determine the number of possible nodes supported by a hardware configuration and only allocates an alien cache sized for possible nodes. The initialization of nr_node_ids occurred too late relative to the bootstrap of the slab allocator and so I moved the setup_nr_node_ids() into free_area_init_nodes(). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] Convert highest_possible_processor_id to nr_cpu_idsChristoph Lameter5-29/+17
We frequently need the maximum number of possible processors in order to allocate arrays for all processors. So far this was done using highest_possible_processor_id(). However, we do need the number of processors not the highest id. Moreover the number was so far dynamically calculated on each invokation. The number of possible processors does not change when the system is running. We can therefore calculate that number once. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Frederik Deweerdt <frederik.deweerdt@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] Replace highest_possible_node_id() with nr_node_idsChristoph Lameter3-18/+25
highest_possible_node_id() is currently used to calculate the last possible node idso that the network subsystem can figure out how to size per node arrays. I think having the ability to determine the maximum amount of nodes in a system at runtime is useful but then we should name this entry correspondingly, it should return the number of node_ids, and the the value needs to be setup only once on bootup. The node_possible_map does not change after bootup. This patch introduces nr_node_ids and replaces the use of highest_possible_node_id(). nr_node_ids is calculated on bootup when the page allocators pagesets are initialized. [deweerdt@free.fr: fix oops] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] mincore warning fixAndrew Morton1-1/+4
allnoconfig: mm/mincore.c: In function 'do_mincore': mm/mincore.c:122: warning: unused variable 'entry' Yet another entry in the why-macros-are-wrong encyclopedia. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fix mempolicy's check on a system with memory-less-nodeKAMEZAWA Hiroyuki1-4/+9
bind_zonelist() can create zero-length zonelist if there is a memory-less-node. This patch checks the length of zonelist. If length is 0, returns -EINVAL. tested on ia64/NUMA with memory-less-node. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] rework reserved major handlingAndrew Morton4-13/+19
Several people have reported failures in dynamic major device number handling due to the recent changes in there to avoid handing out the local/experimental majors. Rolf reports that this is due to a gcc-4.1.0 bug. The patch refactors that code a lot in an attempt to provoke the compiler into behaving. Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] minix v3: fix superblock definitionAndries Brouwer1-2/+1
Somehow we got the layout of the v3 superblock wrong, which causes crashes due to overindexing of the buffer_head array in statfs on large fielsystems. Cc: "Cedric Augonnet" <cedric.augonnet@gmail.com> Cc: "Daniel Aragones" <danarag@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] xfs warning fixAndrew Morton1-1/+1
fs/xfs/linux-2.6/xfs_super.c:903: warning: 'noinline' attribute ignored Cc: David Chinner <dgc@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] Fix build errors if bitop functions are do {} while macrosRalf Baechle2-12/+12
If one of clear_bit, change_bit or set_bit is defined as a do { } while (0) function usage of these functions in parenthesis like (foo_bit(23, &var)) while be expaned to something like (do { ... } while (0)}). resulting in a build error. This patch removes the useless parenthesis. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds60-320/+425
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4165/1: S3C24XX: Select CONFIG_NO_IOPORT [ARM] Fix s3c2410 ALSA audio for typedef elimination [ARM] Fix ARM AACI ALSA driver [ARM] fix mach-at91 build breakage [ARM] Fix jornada720 build errors [ARM] Fix iop13xx build error [ARM] Fix build error caused by move of apm [ARM] 4223/1: ixdp2351 : Fix for a define error [ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xx [ARM] 4186/1: iop: remove cp6_enable/disable routines [ARM] 4185/2: entry: introduce get_irqnr_preamble and arch_ret_to_user
2007-02-20Merge ARM fixesRussell King5239-121129/+241864