summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-01-21mfd: wm5110: Add register patch for rev D chipCharles Keepax1-1/+29
Evaluation of revision D of WM5110 suggests updates to the register patch for optimal performance. For the sake of clarity rev C of the chip does not require a register patch. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()Roger Quadros1-24/+12
pm_runtime_get/put_sync() can sleep so don't hold spinlock while calling them. This patch prevents a BUG() during system suspend when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. Bug is present in Kernel versions v3.9 onwards. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21gpio: lp3943: Remove redundant of_match_ptr helperSachin Kamat1-1/+1
'lp3943_gpio_of_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sta2x11-mfd: Use named constants for pci_power_t valuesJulia Lawall1-1/+1
If nothing more than to improve code readability. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev; @@ pci_set_power_state(pdev, - 0 + PCI_D0 ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21Documentation: mfd: Fix LDO index in s2mps11.txtSachin Kamat1-1/+1
LDO indices start from 1. Fix the example appropriately. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Cleanup mfd-mcp-sa11x0.h headerSachin Kamat1-4/+2
Commit a1fd844c6e62 ("ARM: sa1100: move platform_data definitions") moved the file to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.Manish Badarkhe1-12/+2
Instead of "#if define CONFIG_OF" use "IS_ENABLED(CONFIG_OF)" option for DT code to avoid if-deffery in code. Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: twl6030: Fix endianness problem in IRQ handlerDanke Xie1-3/+5
The current TWL 6030 IRQ handler assumes little endianness. This change makes it endian-neutral. Signed-off-by: Danke Xie <d.xie@sta.samsung.com> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sec-core: Add cells for S5M8767-clocksTushar Behera1-1/+3
S5M8767 chip has 3 crystal oscillators running at 32KHz. These are supported by s2mps11-clk driver. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Remove redundant of_match_ptr helperSachin Kamat1-1/+1
'max14577_dt_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: twl6040: Fix sparse non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/mfd/twl6040.c:89:20: warning: symbol 'twl6040_patch' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Revert "mfd: Always assign of_node in mfd_add_device()"Lee Jones1-2/+0
This reverts commit 68044bee13770918e0b28dd44aa98c889ec7558f. We've had confirmed reports of this patch causing unforeseen issues with existing MFD users. It has been agreed by the original author and myself that reversion is the best solution. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: rtsx: Fix sparse non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/mfd/rtl8411.c:473:6: warning: symbol 'rtl8411_init_common_params' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max77693: Set proper maximum register for MUIC regmapKrzysztof Kozlowski1-1/+7
The MUIC block in max77693 has different I2C address than PMIC. The driver allocated two regmaps: for PMIC and MUIC. However it used the same regmap_config (with max_register field) for both regmaps. Actual maximum address of register for MUIC is different than for PMIC. Define another regmap_config for MUIC with proper max_register value. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max77686: Fix regmap resource leak on driver removeKrzysztof Kozlowski1-1/+1
The regmap used by max77686 MFD driver was not freed with regmap_exit() on driver exit. This lead to leak of resources. Replace regmap_init_i2c() call in driver probe with initialization of managed register map so the regmap will be properly freed by the device management code. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Represent correct filenames in file headersLaszlo Papp3-3/+3
The original author(s) probably copy/pasted these headers from the existing public header files. Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: rtsx: Add support for card reader rtl8402Micky Ching3-4/+46
rtl8402 is much like rtl8411, so just add it to rtl8411.c Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: rtsx: Add set pull control macro and simplify rtl8411Micky Ching2-40/+21
Add set pull control macro to reduce code for setting pull control, and use a common init function to reduce code for rtl8411.c. So this patch is used to just simplify code. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max8997: Enforce mfd_add_devices() return value checkLaszlo Papp1-4/+5
The original author provided a random return value check which is redundant and seemingly floating. This patch not only relocates the check so it is more clearly associated with the invokation of mfd_add_devices(), but provides a store for the error value. We also print a meaningful message on error before returning. Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: mc13xxx: Simplify probe() & remove()Alexander Shiyan4-50/+29
This patch simplifies probe() and remove() functions by moving some initialisation code out from the I2C/SPI init() and exit() functions and into the core driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: mc13xxx: Remove useless symbol MFD_MC13783Alexander Shiyan5-8/+4
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need to keep additional symbol. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: mc13xxx: Remove duplicate mc13xxx_get_flags() declarationAlexander Shiyan1-2/+0
mc13xxx_get_flags() declaration given twice. This patch removes this duplicate. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ssbi: Mark match table constStephen Boyd1-1/+1
This is a read-only data structure. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ssbi: Constify buffer in ssbi_writeStephen Boyd2-5/+5
In preparation for passing a const pointer directly to ssbi_write() from the regmap APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ssbi: Remove platform data structs and hide ssbi type enumStephen Boyd2-16/+7
The ssbi driver assumes that the device is DT based. Remove the platform data structs that will never be used and hide the enum in the only C file that uses it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Always assign of_node in mfd_add_device()Stephen Warren1-0/+2
mfd_add_device() assigns .of_node in the device objects it creates only if the mfd_cell for the device has the .of_compatible field set and the DT node for the top-level MFD device contains a child whose compatible property matches the cell's .of_compatible field. This leaves .of_node unset in many cases. When this happens, entries in the DT /aliases property which refer to the top-level MFD DT node will never match the MFD child devices, hence causing the requested alias not to be honored. Solve this by setting each MFD child device's .of_node equal to the top- level MFD device's .of_node field in the cases where it would otherwise remain unset. The first use-case for this will be aliases for the TPS6586x's RTC device. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Add delay for raising CSRhyland Klein2-0/+38
The EC has specific timing it requires. Add support for an optional delay after raising CS to fix timing issues. This is configurable based on a DT property "google,cros-ec-spi-msg-delay". If this property isn't set, then no delay will be added. However, if set it will cause a delay equal to the value passed to it to be inserted at the end of a transaction. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Use 0 instead of '\0' consistentlyThierry Reding1-3/+3
memset() was being called with the second parameter set to '\0', which is equivalent but longer than the more canonical 0. Update the code to use the latter variant consistently across the driver. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Depend on OFThierry Reding1-1/+1
The driver is not used on any non-DT platform, so it can depend on the OF Kconfig symbol to make that explicit. This is in preparation of a subsequent patch which parses some parameters from the device tree and would otherwise have to conditionalize that code. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Use correct module licenseThierry Reding1-1/+1
According to the header comment in the source file the driver is licensed under GPL v2, so update MODULE_LICENSE() to match that. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sec-core: Fix sparse NULL pointer warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/mfd/sec-core.c:202:16: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sta2x11-mfd: Fix return value check in sta2x11_mfd_platform_probe()Wei Yongjun1-1/+1
In case of error, the function devm_regmap_init_mmio() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: mc13xxx: Remove redundant checksAlexander Shiyan1-4/+1
Checking for maximal register is already provided by regmap API, so remove redundant checks. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21regulator: tps6586x: Add and use correct voltage tableStefan Agner2-21/+76
Depending on the regulator version, the voltage table might be different. Use version specific regulator tables in order to select correct voltage table. For the following regulator versions different voltage tables are now used: * TPS658623: Use correct voltage table for SM2 * TPS658643: New voltage table for SM2 Both versions are in use on the Colibri T20 module. Make use of the correct tables by requesting the correct SM2 voltage of 1.8V. This change is not backward compatible since an old driver is not able to correctly set that value. The value 1.8V is out of range for the old driver and will refuse to probe the device. The regulator starts with default settings and the driver shows appropriate error messages. On Colibri T20, the old value used to work with TPS658623 since the driver applied a wrong voltage table too. However, the TPS658643 used on V1.2 devices uses yet another voltage table and those broke that pseudo-compatibility. The regulator driver now has the correct voltage table for both regulator versions and those the correct voltage can be used in the device tree. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: tps6586x: Add version detectionStefan Agner2-8/+49
Use the VERSIONCRC to determine the exact device version. According to the datasheet this register can be used as device identifier. The identification is needed since some tps6586x regulators use a different voltage table. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21pwm: Add LP3943 PWM driverMilo Kim3-0/+325
This is the other of the LP3943 MFD driver. LP3943 can be used as a PWM generator, up to 2 channels. * Two PWM generators supported * Supported PWM operations request, free, config, enable and disable * Pin assignment A driver data, 'pin_used' is checked when a PWM is requested. If the output pin is already assigned, then returns as failure. If the pin is available, 'pin_used' is set. When the PWM is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Add LP3943 MFD driverMilo Kim4-0/+293
LP3943 has 16 output pins which can be used as GPIO expander and PWM generator. * Regmap I2C interface for R/W LP3943 registers * Atomic operations for output pin assignment The driver should check whether requested pin is available or not. If the pin is already used, pin request returns as a failure. A driver data, 'pin_used' is checked when gpio_request() and pwm_request() are called. If the pin is available, then pin_used is set. And it is cleared when gpio_free() and pwm_free(). * Device tree support Compatible strings for GPIO and PWM driver. LP3943 platform data is PWM related, so parsing the device tree is implemented in the PWM driver. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21gpio: add LP3943 I2C GPIO expander driverMilo Kim3-0/+251
This is one of LP3943 MFD driver. LP3943 is configurable as a GPIO expander, up to 16 GPIOs. * Application note: how to configure LP3943 as a GPIO expander http://www.ti.com/lit/an/snva287a/snva287a.pdf * Supported GPIO controller operations request, free, direction_input, direction_output, get and set * GPIO direction register not supported LP3943 doesn't have the GPIO direction register. It only provides input and output status registers. So, private data for the direction should be handled manually. This variable is updated whenever the direction is changed and used in 'get' operation. * Pin assignment A driver data, 'pin_used' is checked when a GPIO is requested. If the GPIO is already assigned, then returns as failure. If the GPIO is available, 'pin_used' is set. When the GPIO is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21Documentation: Add LP3943 DT bindings and documentMilo Kim3-0/+128
Bindings for LP3943 MFD, GPIO and PWM controller are added. Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Cleanup an error messageDan Carpenter1-2/+1
"pdata" is a NULL not an ERR_PTR so there is no use printing it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: wm831x: Use PM ops for shutdownMark Brown2-6/+10
This helps move us towards removing the bus custom operations. Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ab8500: Use irqdomain to map interruptsLinus Walleij1-1/+1
All subdrivers use the irqdomain to demux AB8500 IRQs but here in the hierarchical path we find a leftover instance using the hard-coded IRQ base. Convert it to use irqdomain with a oneliner. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: rtsx: Prevent 'used uninitialised' warningsLee Jones1-3/+3
drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings': drivers/mfd/rtl8411.c:58:7: warning: 'reg1' is used uninitialized in this function [-Wuninitialized] drivers/mfd/rtl8411.c: In function 'rtl8411b_fetch_vendor_settings': drivers/mfd/rtl8411.c:79:7: warning: 'reg' is used uninitialized in this function [-Wuninitialized] drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings': drivers/mfd/rtl8411.c:69:26: warning: 'reg3' may be used uninitialized in this function [-Wuninitialized] Tested-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han10-10/+10
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd/pinctrl: Delete platform data headerLinus Walleij3-24/+12
This deletes the special AB8500 GPIO platform data passing header and merges the few remaining contents down into the abx500 pinctrl driver which handles the abx500 GPIO device. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ab8500: Delete all GPIO platform data instancesLinus Walleij2-12/+0
This deletes all instances where the AB8500 GPIO platform data is passed around. It is completely unused in the kernel now, so it does not hurt anyone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21Merge tag 'ib-iio-input-3.13-1' into for-mfd-nextLee Jones4-34/+117
Immutable branch for IIO and Input
2014-01-21Merge tag 'ib-asoc-3.14.2' into for-mfd-nextLee Jones3-30/+255
Immutable branch between MFD and ASoC due for the v3.14 merge window
2014-01-21Merge tag 'tags/ib-asoc-1' into for-mfd-nextLee Jones5-4/+136
Immutable branch for ASoC, as requested by Mark Brown
2014-01-21pinctrl: abx500: Delete non-devicetree probe pathLinus Walleij1-27/+9
All instances of this device are now coming from device tree- enabled platforms probing without using platform data. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 05:06:48 +0000