summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-01-16Merge branch 'i2c/for-current' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bugfix from Wolfram Sang. * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Re-instate body of i2c_parent_is_i2c_adapter()
2014-01-15bpf: do not use reciprocal divideEric Dumazet6-46/+45
At first Jakub Zawadzki noticed that some divisions by reciprocal_divide were not correct. (off by one in some cases) http://www.wireshark.org/~darkjames/reciprocal-buggy.c He could also show this with BPF: http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c The reciprocal divide in linux kernel is not generic enough, lets remove its use in BPF, as it is not worth the pain with current cpus. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Daniel Borkmann <dxchgb@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Matt Evans <matt@ozlabs.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15be2net: add dma_mapping_error() check for dma_map_page()Ivan Vecera1-2/+9
The driver does not check value returned by dma_map_page. The patch fixes this. v2: Removed the bugfix for non-bug ;-) (thanks Sathya) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Sathya Perla <Sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15bnx2x: Don't release PCI bars on shutdownYuval Mintz1-14/+15
The bnx2x driver in its pci shutdown() callback releases its pci bars (in the same manner it does during its pci remove() callback). During a system reboot while VFs are enabled, its possible for the VF's remove to be called (as a result of pci_disable_sriov()) after its shutdown callback has already finished running; This will cause a paging request fault as the VF tries to access the pci bar which it has previously released, crashing the system. This patch further differentiates the shutdown and remove callbacks, preventing the pci release procedures from being called during shutdown. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15net,via-rhine: Fix tx_timeout handlingRichard Weinberger1-0/+1
rhine_reset_task() misses to disable the tx scheduler upon reset, this can lead to a crash if work is still scheduled while we're resetting the tx queue. Fixes: [ 93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6 Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15batman-adv: fix batman-adv header overhead calculationMarek Lindner1-1/+1
Batman-adv prepends a full ethernet header in addition to its own header. This has to be reflected in the MTU calculation, especially since the value is used to set dev->hard_header_len. Introduced by 411d6ed93a5d0601980d3e5ce75de07c98e3a7de ("batman-adv: consider network coding overhead when calculating required mtu") Reported-by: cmsv <cmsv@wirelesspt.net> Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-15kvm: x86: fix apic_base enable checkAndrew Jones1-1/+1
Commit e66d2ae7c67bd moved the assignment vcpu->arch.apic_base = value above a condition with (vcpu->arch.apic_base ^ value), causing that check to always fail. Use old_value, vcpu->arch.apic_base's old value, in the condition instead. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-15Merge branch 'akpm' (incoming from Andrew)Linus Torvalds7-35/+50
Merge patches from Andrew Morton: "Six fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/percpu_counter.c: fix __percpu_counter_add() crash_dump: fix compilation error (on MIPS at least) mm: fix crash when using XFS on loopback MIPS: fix blast_icache32 on loongson2 MIPS: fix case mismatch in local_r4k_flush_icache_range() nilfs2: fix segctor bug that causes file system corruption
2014-01-15Merge tag 'md/3.13-fixes' of git://neil.brown.name/mdLinus Torvalds5-14/+29
Pull late md fixes from Neil Brown: "Half a dozen md bug fixes. All of these fix real bugs the people have hit, and are tagged for -stable. Sorry they are late .... Christmas holidays and all that. Hopefully they can still squeak into 3.13" * tag 'md/3.13-fixes' of git://neil.brown.name/md: md: fix problem when adding device to read-only array with bitmap. md/raid10: fix bug when raid10 recovery fails to recover a block. md/raid5: fix a recently broken BUG_ON(). md/raid1: fix request counting bug in new 'barrier' code. md/raid10: fix two bugs in handling of known-bad-blocks. md/raid5: Fix possible confusion when multiple write errors occur.
2014-01-15Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds10-14/+29
Pull drm fixes from Dave Airlie: "One nouveau regression fix on older cards, i915 black screen fixes, and a revert for a strange G33 intel problem" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix null ptr dereferences on some boards Revert "drm: copy mode type in drm_mode_connector_list_update()" drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init() drm/i915: fix DDI PLLs HW state readout code
2014-01-15lib/percpu_counter.c: fix __percpu_counter_add()Ming Lei1-2/+2
__percpu_counter_add() may be called in softirq/hardirq handler (such as, blk_mq_queue_exit() is typically called in hardirq/softirq handler), so we need to call this_cpu_add()(irq safe helper) to update percpu counter, otherwise counts may be lost. This fixes the problem that 'rmmod null_blk' hangs in blk_cleanup_queue() because of miscounting of request_queue->mq_usage_counter. This patch is the v1 of previous one of "lib/percpu_counter.c: disable local irq when updating percpu couter", and takes Andrew's approach which may be more efficient for ARCHs(x86, s390) that have optimized this_cpu_add(). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Shaohua Li <shli@fusionio.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Fan Du <fan.du@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15crash_dump: fix compilation error (on MIPS at least)Qais Yousef1-0/+2
In file included from kernel/crash_dump.c:2:0: include/linux/crash_dump.h:22:27: error: unknown type name `pgprot_t' when CONFIG_CRASH_DUMP=y The error was traced back to commit 9cb218131de1 ("vmcore: introduce remap_oldmem_pfn_range()") include <asm/pgtable.h> to get the missing definition Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15mm: fix crash when using XFS on loopbackMikulas Patocka1-1/+4
Commit 8456a648cf44 ("slab: use struct page for slab management") causes a crash in the LVM2 testsuite on PA-RISC (the crashing test is fsadm.sh). The testsuite doesn't crash on 3.12, crashes on 3.13-rc1 and later. Bad Address (null pointer deref?): Code=15 regs=000000413edd89a0 (Addr=000006202224647d) CPU: 3 PID: 24008 Comm: loop0 Not tainted 3.13.0-rc6 #5 task: 00000001bf3c0048 ti: 000000413edd8000 task.ti: 000000413edd8000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111100100001110 Not tainted r00-03 000000ff0806f90e 00000000405c8de0 000000004013e6c0 000000413edd83f0 r04-07 00000000405a95e0 0000000000000200 00000001414735f0 00000001bf349e40 r08-11 0000000010fe3d10 0000000000000001 00000040829c7778 000000413efd9000 r12-15 0000000000000000 000000004060d800 0000000010fe3000 0000000010fe3000 r16-19 000000413edd82a0 00000041078ddbc0 0000000000000010 0000000000000001 r20-23 0008f3d0d83a8000 0000000000000000 00000040829c7778 0000000000000080 r24-27 00000001bf349e40 00000001bf349e40 202d66202224640d 00000000405a95e0 r28-31 202d662022246465 000000413edd88f0 000000413edd89a0 0000000000000001 sr00-03 000000000532c000 0000000000000000 0000000000000000 000000000532c000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401fe42c 00000000401fe430 IIR: 539c0030 ISR: 00000000202d6000 IOR: 000006202224647d CPU: 3 CR30: 000000413edd8000 CR31: 0000000000000000 ORIG_R28: 00000000405a95e0 IAOQ[0]: vma_interval_tree_iter_first+0x14/0x48 IAOQ[1]: vma_interval_tree_iter_first+0x18/0x48 RP(r2): flush_dcache_page+0x128/0x388 Backtrace: flush_dcache_page+0x128/0x388 lo_splice_actor+0x90/0x148 [loop] splice_from_pipe_feed+0xc0/0x1d0 __splice_from_pipe+0xac/0xc0 lo_direct_splice_actor+0x1c/0x70 [loop] splice_direct_to_actor+0xec/0x228 lo_receive+0xe4/0x298 [loop] loop_thread+0x478/0x640 [loop] kthread+0x134/0x168 end_fault_vector+0x20/0x28 xfs_setsize_buftarg+0x0/0x90 [xfs] Kernel panic - not syncing: Bad Address (null pointer deref?) Commit 8456a648cf44 changes the page structure so that the slab subsystem reuses the page->mapping field. The crash happens in the following way: * XFS allocates some memory from slab and issues a bio to read data into it. * the bio is sent to the loopback device. * lo_receive creates an actor and calls splice_direct_to_actor. * lo_splice_actor copies data to the target page. * lo_splice_actor calls flush_dcache_page because the page may be mapped by userspace. In that case we need to flush the kernel cache. * flush_dcache_page asks for the list of userspace mappings, however that page->mapping field is reused by the slab subsystem for a different purpose. This causes the crash. Note that other architectures without coherent caches (sparc, arm, mips) also call page_mapping from flush_dcache_page, so they may crash in the same way. This patch fixes this bug by testing if the page is a slab page in page_mapping and returning NULL if it is. The patch also fixes VM_BUG_ON(PageSlab(page)) that could happen in earlier kernels in the same scenario on architectures without cache coherence when CONFIG_DEBUG_VM is enabled - so it should be backported to stable kernels. In the old kernels, the function page_mapping is placed in include/linux/mm.h, so you should modify the patch accordingly when backporting it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: John David Anglin <dave.anglin@bell.net>] Cc: Andi Kleen <ak@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: Pekka Enberg <penberg@kernel.org> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15MIPS: fix blast_icache32 on loongson2Aaro Koskinen2-21/+29
Commit 14bd8c082016 ("MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips") failed to add Loongson2 specific blast_icache32 functions. Fix that. The patch fixes the following crash seen with 3.13-rc1: Reserved instruction in kernel code[#1]: [...] Call Trace: blast_icache32_page+0x8/0xb0 r4k_flush_cache_page+0x19c/0x200 do_wp_page.isra.97+0x47c/0xe08 handle_mm_fault+0x938/0x1118 __do_page_fault+0x140/0x540 resume_userspace_check+0x0/0x10 Code: 00200825 64834000 00200825 <bc900000> bc900020 bc900040 bc900060 bc900080 bc9000a0 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: John Crispin <blogic@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15MIPS: fix case mismatch in local_r4k_flush_icache_range()Huacai Chen3-7/+7
Currently, Loongson-2 call protected_blast_icache_range() and others call protected_loongson23_blast_icache_range(), but I think the correct behavior should be the opposite. BTW, Loongson-3's cache-ops is compatible with MIPS64, but not compatible with Loongson-2. So, rename xxx_loongson23_yyy things to xxx_loongson2_yyy. The patch fixes early boot hang with 3.13-rc1, introduced in commit 14bd8c082016 ("MIPS: Loongson: Get rid of Loongson 2 #ifdefery all over arch/mips"). Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: John Crispin <blogic@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15nilfs2: fix segctor bug that causes file system corruptionAndreas Rohner1-4/+6
There is a bug in the function nilfs_segctor_collect, which results in active data being written to a segment, that is marked as clean. It is possible, that this segment is selected for a later segment construction, whereby the old data is overwritten. The problem shows itself with the following kernel log message: nilfs_sufile_do_cancel_free: segment 6533 must be clean Usually a few hours later the file system gets corrupted: NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0 NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660) The issue can be reproduced with a file system that is nearly full and with the cleaner running, while some IO intensive task is running. Although it is quite hard to reproduce. This is what happens: 1. The cleaner starts the segment construction 2. nilfs_segctor_collect is called 3. sc_stage is on NILFS_ST_SUFILE and segments are freed 4. sc_stage is on NILFS_ST_DAT current segment is full 5. nilfs_segctor_extend_segments is called, which allocates a new segment 6. The new segment is one of the segments freed in step 3 7. nilfs_sufile_cancel_freev is called and produces an error message 8. Loop around and the collection starts again 9. sc_stage is on NILFS_ST_SUFILE and segments are freed including the newly allocated segment, which will contain active data and can be allocated at a later time 10. A few hours later another segment construction allocates the segment and causes file system corruption This can be prevented by simply reordering the statements. If nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments the freed segments are marked as dirty and cannot be allocated any more. Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net> Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15Merge branch 'clockevents/3.13-fixes' of ↵Ingo Molnar1-8/+13
git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clock driver fix from Daniel Lezcano: " * Soren Brinkmann fixed the cadence_ttc driver where a call to clk_get_rate happens in an interrupt context. More precisely in an IPI when the broadcast timer is initialized for each cpu in the cpuidle driver. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-15Merge branch 'drm-nouveau-next' of ↵Dave Airlie6-10/+17
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Single regression fix for nouveau * 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix null ptr dereferences on some boards
2014-01-15drm/nouveau: fix null ptr dereferences on some boardsBen Skeggs6-10/+17
Regression from "device: populate master subdev pointer only when fully constructed" Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-14qlge: Fix vlan netdev features.Jitendra Kalsaria1-0/+2
vlan gets the same netdev features except vlan filter. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: avoid reference counter overflows on fib_rules in multicast forwardingHannes Frederic Sowa2-4/+10
Bob Falken reported that after 4G packets, multicast forwarding stopped working. This was because of a rule reference counter overflow which freed the rule as soon as the overflow happend. This patch solves this by adding the FIB_LOOKUP_NOREF flag to fib_rules_lookup calls. This is safe even from non-rcu locked sections as in this case the flag only implies not taking a reference to the rule, which we don't need at all. Rules only hold references to the namespace, which are guaranteed to be available during the call of the non-rcu protected function reg_vif_xmit because of the interface reference which itself holds a reference to the net namespace. Fixes: f0ad0860d01e47 ("ipv4: ipmr: support multiple tables") Fixes: d1db275dd3f6e4 ("ipv6: ip6mr: support multiple tables") Reported-by: Bob Falken <NetFestivalHaveFun@gmx.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Julian Anastasov <ja@ssi.bg> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14dm9601: add USB IDs for new dm96xx variantsPeter Korsgaard1-0/+12
A number of new dm96xx variants now exist. Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14MAINTAINERS: add virtio-dev ML for virtioMichael S. Tsirkin1-0/+3
Since virtio is an OASIS standard draft now, virtio implementation discussions are taking place on the virtio-dev OASIS mailing list. Update MAINTAINERS. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ieee802154: Fix memory leak in ieee802154_add_iface()Christian Engelmayer1-2/+4
Fix a memory leak in the ieee802154_add_iface() error handling path. Detected by Coverity: CID 710490. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14hwmon: (coretemp) Fix truncated name of alarm attributesJean Delvare1-1/+1
When the core number exceeds 9, the size of the buffer storing the alarm attribute name is insufficient and the attribute name is truncated. This causes libsensors to skip these attributes as the truncated name is not recognized. Reported-by: Andreas Hollmann <hollmann@in.tum.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-01-14i2c: Re-instate body of i2c_parent_is_i2c_adapter()Stephen Warren1-1/+1
The body of i2c_parent_is_i2c_adapter() is currently guarded by I2C_MUX. It should be CONFIG_I2C_MUX instead. Among potentially other problems, this resulted in i2c_lock_adapter() only locking I2C mux child adapters, and not the parent adapter. In turn, this could allow inter-mingling of mux child selection and I2C transactions, which could result in I2C transactions being directed to the wrong I2C bus, and possibly even switching between busses in the middle of a transaction. One concrete issue caused by this bug was corrupted HDMI EDID reads during boot on the NVIDIA Tegra Seaboard system, although this only became apparent in recent linux-next, when the boot timing was changed just enough to trigger the race condition. Fixes: 3923172b3d70 ("i2c: reduce parent checking to a NOOP in non-I2C_MUX case") Cc: Phil Carmody <phil.carmody@partner.samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-01-13net: usbnet: fix SG initialisationBjørn Mork1-1/+1
Commit 60e453a940ac ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a940ac ("USBNET: fix handling padding packet") Reported-by: Thomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait socketsNeal Cardwell1-1/+4
Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock (not just TIME_WAIT), and for such sockets the tw_substate field holds the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2. This brings the inet_diag state-matching code in line with the field it uses to populate idiag_state. This is also analogous to the info exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state and get_timewait4_sock() exports tw->tw_substate. Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi state time-wait" would also return sockets in state TCP_FIN_WAIT2. This is an old bug that predates 05dbc7b ("tcp/dccp: remove twchain"). Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14md: fix problem when adding device to read-only array with bitmap.NeilBrown2-3/+18
If an array is started degraded, and then the missing device is found it can be re-added and a minimal bitmap-based recovery will bring it fully up-to-date. If the array is read-only a recovery would not be allowed. But also if the array is read-only and the missing device was present very recently, then there could be no need for any recovery at all, so we simply include the device in the read-only array without any recovery. However... if the missing device was removed a little longer ago it could be missing some updates, but if a bitmap is present it will be conditionally accepted pending a bitmap-based update. We don't currently detect this case properly and will include that old device into the read-only array with no recovery even though it really needs a recovery. This patch keeps track of whether a bitmap-based-recovery is really needed or not in the new Bitmap_sync rdev flag. If that is set, then the device will not be added to a read-only array. Cc: Andrei Warkentin <andreiw@vmware.com> Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid10: fix bug when raid10 recovery fails to recover a block.NeilBrown1-4/+4
commit e875ecea266a543e643b19e44cf472f1412708f9 md/raid10 record bad blocks as needed during recovery. added code to the "cannot recover this block" path to record a bad block rather than fail the whole recovery. Unfortunately this new case was placed *after* r10bio was freed rather than *before*, yet it still uses r10bio. This is will crash with a null dereference. So move the freeing of r10bio down where it is safe. Cc: stable@vger.kernel.org (v3.1+) Fixes: e875ecea266a543e643b19e44cf472f1412708f9 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid5: fix a recently broken BUG_ON().NeilBrown1-1/+2
commit 6d183de4077191d1201283a9035ce57a9b05254d md/raid5: fix newly-broken locking in get_active_stripe. simplified a BUG_ON, but removed too much so now it sometimes fires when it shouldn't. When the STRIPE_EXPANDING flag is set, the stripe_head might be on a special list while multiple stripe_heads are collected, or it might not be on any list, even a 'free' list when the refcount is zero. As long as STRIPE_EXPANDING is set, it will be found and added back to a list eventually. So both of the BUG_ONs which test for the ->lru being empty or not need to avoid the case where STRIPE_EXPANDING is set. The patch which broke this was marked for -stable, so this patch needs to be applied to any branch that received 6d183de4 Fixes: 6d183de4077191d1201283a9035ce57a9b05254d Cc: stable@vger.kernel.org (any release to which above was applied) Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid1: fix request counting bug in new 'barrier' code.NeilBrown1-2/+1
The new iobarrier implementation in raid1 (which keeps normal writes and resync activity separate) counts every request what is not before the current resync point in either next_window_requests or current_window_requests. It flags that the request is counted by setting ->start_next_window. allow_barrier follows this model exactly and decrements one of the *_window_requests if and only if ->start_next_window is set. However wait_barrier(), which increments *_window_requests uses a slightly different test for setting -.start_next_window (which is set from the return value of this function). So there is a possibility of the counts getting out of sync, and this leads to the resync hanging. So change wait_barrier() to return a non-zero value in exactly the same cases that it increments *_window_requests. But was introduced in 3.13-rc1. Reported-by: Bruno Wolff III <bruno@wolff.to> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68061 Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 Cc: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid10: fix two bugs in handling of known-bad-blocks.NeilBrown1-2/+2
If we discover a bad block when reading we split the request and potentially read some of it from a different device. The code path of this has two bugs in RAID10. 1/ we get a spin_lock with _irq, but unlock without _irq!! 2/ The calculation of 'sectors_handled' is wrong, as can be clearly seen by comparison with raid1.c This leads to at least 2 warnings and a probable crash is a RAID10 ever had known bad blocks. Cc: stable@vger.kernel.org (v3.1+) Fixes: 856e08e23762dfb92ffc68fd0a8d228f9e152160 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14md/raid5: Fix possible confusion when multiple write errors occur.NeilBrown1-2/+2
commit 5d8c71f9e5fbdd95650be00294d238e27a363b5c md: raid5 crash during degradation Fixed a crash in an overly simplistic way which could leave R5_WriteError or R5_MadeGood set in the stripe cache for devices for which it is no longer relevant. When those devices are removed and spares added the flags are still set and can cause incorrect behaviour. commit 14a75d3e07c784c004b4b44b34af996b8e4ac453 md/raid5: preferentially read from replacement device if possible. Fixed the same bug if a more effective way, so we can now revert the original commit. Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Cc: stable@vger.kernel.org (3.2+ - 3.2 will need a different fix though) Fixes: 5d8c71f9e5fbdd95650be00294d238e27a363b5c Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-14Revert "drm: copy mode type in drm_mode_connector_list_update()"Dave Airlie1-1/+1
This reverts commit 3fbd6439e4639ecaeaae6c079e0aa497a1ac3482. This caused some strange booting lockup issues on an Intel G33 belonging to Daniel Vetter, very unusual, I was hoping Daniel would track this down, but it looks like instead I'll have to hack a different fix for -next. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-01-14Merge tag 'drm-intel-fixes-2014-01-13' of ↵Dave Airlie3-3/+11
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Black screen fixes, one for hsw+bdw each and a regression fix for locking+load detection. * tag 'drm-intel-fixes-2014-01-13' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init() drm/i915: fix DDI PLLs HW state readout code
2014-01-13cxgb4: silence shift wrapping static checker warningDan Carpenter1-1/+1
I don't know how large "tp->vlan_shift" is but static checkers worry about shift wrapping bugs here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13Merge branch 'merge' of ↵Linus Torvalds1-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fix from Ben Herrenschmidt: "Here's one regression fix for 3.13 that I would appreciate if you could still pull in. It was an "interesting" one to debug, basically it's an old bug that got somewhat "exposed" by new code breaking the boot on PA Semi boards (yes, it does appear that some people are still using these!)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Check return value of instance-to-package OF call
2014-01-13Merge branch 'x86/urgent' of ↵Linus Torvalds3-9/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Sorry, meant to push out this batch earlier this weekend" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, fpu, amd: Clear exceptions in AMD FXSAVE workaround ftrace/x86: Load ftrace_ops in parameter not the variable holding it
2014-01-13powerpc: Check return value of instance-to-package OF callBenjamin Herrenschmidt1-9/+13
On PA-Semi firmware, the instance-to-package callback doesn't seem to be implemented. We didn't check for error, however, thus subsequently passed the -1 value returned into stdout_node to thins like prom_getprop etc... Thus caused the firmware to load values around 0 (physical) internally as node structures. It somewhat "worked" as long as we had a NULL in the right place (address 8) at the beginning of the kernel, we didn't "see" the bug. But commit 5c0484e25ec03243d4c2f2d4416d4a13efc77f6a "powerpc: Endian safe trampoline" changed the kernel entry point causing that old bug to now cause a crash early during boot. This fixes booting on PA-Semi board by properly checking the return value from instance-to-package. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Olof Johansson <olof@lixom.net> ---
2014-01-12ARM: 7938/1: OMAP4/highbank: Flush L2 cache before disablingTaras Kondratiuk2-0/+2
Kexec disables outer cache before jumping to reboot code, but it doesn't flush it explicitly. Flush is done implicitly inside of l2x0_disable(). But some SoC's override default .disable handler and don't flush cache. This may lead to a corrupted memory during Kexec reboot on these platforms. This patch adds cache flush inside of OMAP4 and Highbank outer_cache.disable() handlers to make it consistent with default l2x0_disable(). Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-12Linux 3.13-rc8v3.13-rc8Linus Torvalds1-1/+1
2014-01-12SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()Steven Rostedt2-3/+22
While running stress tests on adding and deleting ftrace instances I hit this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_inode_permission+0x85/0x160 PGD 63681067 PUD 7ddbe067 PMD 0 Oops: 0000 [#1] PREEMPT CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000 RIP: 0010:[<ffffffff812d8bc5>] [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160 RSP: 0018:ffff88007ddb1c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840 RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000 RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54 R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000 R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000 FS: 00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0 Call Trace: security_inode_permission+0x1c/0x30 __inode_permission+0x41/0xa0 inode_permission+0x18/0x50 link_path_walk+0x66/0x920 path_openat+0xa6/0x6c0 do_filp_open+0x43/0xa0 do_sys_open+0x146/0x240 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff RIP selinux_inode_permission+0x85/0x160 CR2: 0000000000000020 Investigating, I found that the inode->i_security was NULL, and the dereference of it caused the oops. in selinux_inode_permission(): isec = inode->i_security; rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd); Note, the crash came from stressing the deletion and reading of debugfs files. I was not able to recreate this via normal files. But I'm not sure they are safe. It may just be that the race window is much harder to hit. What seems to have happened (and what I have traced), is the file is being opened at the same time the file or directory is being deleted. As the dentry and inode locks are not held during the path walk, nor is the inodes ref counts being incremented, there is nothing saving these structures from being discarded except for an rcu_read_lock(). The rcu_read_lock() protects against freeing of the inode, but it does not protect freeing of the inode_security_struct. Now if the freeing of the i_security happens with a call_rcu(), and the i_security field of the inode is not changed (it gets freed as the inode gets freed) then there will be no issue here. (Linus Torvalds suggested not setting the field to NULL such that we do not need to check if it is NULL in the permission check). Note, this is a hack, but it fixes the problem at hand. A real fix is to restructure the destroy_inode() to call all the destructor handlers from the RCU callback. But that is a major job to do, and requires a lot of work. For now, we just band-aid this bug with this fix (it works), and work on a more maintainable solution in the future. Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home Cc: stable@vger.kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-12thp: fix copy_page_rep GPF by testing is_huge_zero_pmd once onlyHugh Dickins1-3/+3
We see General Protection Fault on RSI in copy_page_rep: that RSI is what you get from a NULL struct page pointer. RIP: 0010:[<ffffffff81154955>] [<ffffffff81154955>] copy_page_rep+0x5/0x10 RSP: 0000:ffff880136e15c00 EFLAGS: 00010286 RAX: ffff880000000000 RBX: ffff880136e14000 RCX: 0000000000000200 RDX: 6db6db6db6db6db7 RSI: db73880000000000 RDI: ffff880dd0c00000 RBP: ffff880136e15c18 R08: 0000000000000200 R09: 000000000005987c R10: 000000000005987c R11: 0000000000000200 R12: 0000000000000001 R13: ffffea00305aa000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f195752f700(0000) GS:ffff880c7fc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000093010000 CR3: 00000001458e1000 CR4: 00000000000027e0 Call Trace: copy_user_huge_page+0x93/0xab do_huge_pmd_wp_page+0x710/0x815 handle_mm_fault+0x15d8/0x1d70 __do_page_fault+0x14d/0x840 do_page_fault+0x2f/0x90 page_fault+0x22/0x30 do_huge_pmd_wp_page() tests is_huge_zero_pmd(orig_pmd) four times: but since shrink_huge_zero_page() can free the huge_zero_page, and we have no hold of our own on it here (except where the fourth test holds page_table_lock and has checked pmd_same), it's possible for it to answer yes the first time, but no to the second or third test. Change all those last three to tests for NULL page. (Note: this is not the same issue as trinity's DEBUG_PAGEALLOC BUG in copy_page_rep with RSI: ffff88009c422000, reported by Sasha Levin in https://lkml.org/lkml/2013/3/29/103. I believe that one is due to the source page being split, and a tail page freed, while copy is in progress; and not a problem without DEBUG_PAGEALLOC, since the pmd_same check will prevent a miscopy from being made visible.) Fixes: 97ae17497e99 ("thp: implement refcounting for huge zero page") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v3.10 v3.11 v3.12 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-12block: null_blk: fix queue leak inside removing deviceMing Lei1-8/+2
When queue_mode is NULL_Q_MQ and null_blk is being removed, blk_cleanup_queue() isn't called to cleanup queue, so the queue allocated won't be freed. This patch calls blk_cleanup_queue() for MQ to drain all pending requests first and release the reference counter of queue kobject, then blk_mq_free_queue() will be called in queue kobject's release handler when queue kobject's reference counter drops to zero. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-12sched_clock: Disable seqlock lockdep usage in sched_clock()John Stultz1-3/+3
Unfortunately the seqlock lockdep enablement can't be used in sched_clock(), since the lockdep infrastructure eventually calls into sched_clock(), which causes a deadlock. Thus, this patch changes all generic sched_clock() usage to use the raw_* methods. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Reported-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1388704274-5278-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12seqlock: Use raw_ prefix instead of _no_lockdepJohn Stultz2-12/+23
Linus disliked the _no_lockdep() naming, so instead use the more-consistent raw_* prefix to the non-lockdep enabled seqcount methods. This also adds raw_ methods for the write operations as well, which will be utilized in a following patch. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Krzysztof Hałasa <khalasa@piap.pl> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Willy Tarreau <w@1wt.eu> Link: http://lkml.kernel.org/r/1388704274-5278-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12sched: Calculate effective load even if local weight is 0Rik van Riel1-1/+1
Thomas Hellstrom bisected a regression where erratic 3D performance is experienced on virtual machines as measured by glxgears. It identified commit 58d081b5 ("sched/numa: Avoid overloading CPUs on a preferred NUMA node") as the problem which had modified the behaviour of effective_load. Effective load calculates the difference to the system-wide load if a scheduling entity was moved to another CPU. The task group is not heavier as a result of the move but overall system load can increase/decrease as a result of the change. Commit 58d081b5 ("sched/numa: Avoid overloading CPUs on a preferred NUMA node") changed effective_load to make it suitable for calculating if a particular NUMA node was compute overloaded. To reduce the cost of the function, it assumed that a current sched entity weight of 0 was uninteresting but that is not the case. wake_affine() uses a weight of 0 for sync wakeups on the grounds that it is assuming the waking task will sleep and not contribute to load in the near future. In this case, we still want to calculate the effective load of the sched entity hierarchy. As effective_load is no longer used by task_numa_compare since commit fb13c7ee (sched/numa: Use a system-wide search to find swap/migration candidates), this patch simply restores the historical behaviour. Reported-and-tested-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Rik van Riel <riel@redhat.com> [ Wrote changelog] Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140106113912.GC6178@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-11x86, fpu, amd: Clear exceptions in AMD FXSAVE workaroundLinus Torvalds1-6/+7
Before we do an EMMS in the AMD FXSAVE information leak workaround we need to clear any pending exceptions, otherwise we trap with a floating-point exception inside this code. Reported-by: halfdog <me@halfdog.net> Tested-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-01-11ARM: 7939/1: traps: fix opcode endianness when read from user memoryTaras Kondratiuk1-2/+3
Currently code has an inverted logic: opcode from user memory is swapped to a proper endianness only in case of read error. While normally opcode should be swapped only if it was read correctly from user memory. Reviewed-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-10 17:52:59 +0000