summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2005-11-09[SCSI] remove Scsi_Host_Template typedefChristoph Hellwig110-186/+185
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] sd: fix issue_flushJames Bottomley1-13/+9
sd_issue_flush() is called from atomic context so we can't use the semaphore based routines to get a reference to the scsi_disk. Assume something else already got the reference so we can safely use it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-08[SCSI] Fix refcount leak in scsi_report_lun_scanAlan Stern1-3/+5
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-08[SCSI] fix usb storage oopsgoggin, edward1-1/+8
The problem is that scsi_run_queue is called from scsi_next_command() after doing a scsi_put_command. If the command was the only thing holding the reference on the scsi_device then the resulting device put will tear down the block queue. Fix this by taking a reference to the device and holding it around scsi_run_queue() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-08Merge by hand (conflicts between pending drivers and kfree cleanups)James Bottomley33-4791/+1414
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds88-579/+5134
2005-11-07Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds32-1569/+673
2005-11-07Merge branch 'release' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-11-07[PATCH] Complete description of shared subtrees.Ram Pai1-0/+1060
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] unbindable mountsRam Pai5-26/+67
An unbindable mount does not forward or receive propagation. Also unbindable mount disallows bind mounts. The semantics is as follows. Bind semantics: It is invalid to bind mount an unbindable mount. Move semantics: It is invalid to move an unbindable mount under shared mount. Clone-namespace semantics: If a mount is unbindable in the parent namespace, the corresponding cloned mount in the child namespace becomes unbindable too. Note: there is subtle difference, unbindable mounts cannot be bind mounted but can be cloned during clone-namespace. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] handling of slave mountsRam Pai2-37/+121
This makes bind, rbind, move, clone namespace and umount operations aware of the semantics of slave mount (see Documentation/sharedsubtree.txt in the last patch of the series for detailed description). Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] introduce slave mountsRam Pai5-4/+60
A slave mount always has a master mount from which it receives mount/umount events. Unlike shared mount the event propagation does not flow from the slave mount to the master. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] shared mounts handling: umountRam Pai5-20/+128
An unmount of a mount creates a umount event on the parent. If the parent is a shared mount, it gets propagated to all mounts in the peer group. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] shared mounts handling: moveRam Pai1-17/+46
Implement handling of mount --move in presense of shared mounts (see Documentation/sharedsubtree.txt in the end of patch series for detailed description). Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] shared mount handling: bind and rbindRam Pai4-22/+204
Implement handling of MS_BIND in presense of shared mounts (see Documentation/sharedsubtree.txt in the end of patch series for detailed description). Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] introduce shared mountsRam Pai5-2/+21
This creates shared mounts. A shared mount when bind-mounted to some mountpoint, propagates mount/umount events to each other. All the shared mounts that propagate events to each other belong to the same peer-group. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] beginning of the shared-subtree properRam Pai6-6/+62
A private mount does not forward or receive propagation. This patch provides user the ability to convert any mount to private. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] making namespace_sem globalRam Pai2-24/+23
This removes the per-namespace semaphore in favor of a global semaphore. This can have an effect on namespace scalability. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] mount expiry fixesRam Pai1-42/+22
- clean up the ugliness in may_umount_tree() - fix a bug in do_loopback(). after cloning a tree, do_loopback() unlinks only the topmost mount of the cloned tree, leaving behind the children mounts on their corresponding expiry list. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] umount_tree() locking changeRam Pai1-33/+51
umount is done under the protection of the namespace semaphore. This can lead to intresting deadlocks when the last reference to a mount is released, if filesystem code is in sufficiently nasty state. This collects all the to-be-released-mounts and releases them after releasing the namespace semaphore. That both reduces the time we are holding namespace semaphore and gets the things more robust. Idea proposed by Al Viro. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] sanitize the interface of graft_tree().Ram Pai1-6/+6
Old semantics: graft_tree() grabs a reference on the vfsmount before returning success. New one: graft_tree() leaves that to caller. All the callers of graft_tree() immediately dropped that reference anyway. Changing the interface takes care of this unnecessary overhead. Idea proposed by Al Viro. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] lindent fs/namespace.cRam Pai1-49/+48
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] make /proc/mounts pollableAl Viro3-16/+78
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] allow callers of seq_open do allocation themselvesAl Viro1-4/+8
Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] cleanups and bug fix in do_loopback()Al Viro1-19/+22
- check_mnt() on the source of binding should've been unconditional from the very beginning. My fault - as far I could've trace it, that's an old thinko made back in 2001. Kudos to Miklos for spotting it... Fixed. - code cleaned up. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umountAl Viro7-79/+113
The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08[PATCH] ppc64: Fix the lazy icache/dcache code for non-RAM pagesBenjamin Herrenschmidt1-0/+3
For some stupid reason I can't explain (brown paper bag is at hand), I removed the check pfn_valid() in the code that does the icache/dcache coherency on POWER4 and later. That causes us to eventually try to access non existing struct page when hashing in IO pages. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08powerpc: merge ide.hStephen Rothwell2-42/+17
This is very simple with it being almost all ppc32 with just a couple of common defines. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08powermac: Use a spinlock in swim3.c (floppy driver) instead of cliPaul Mackerras1-10/+10
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08macintosh: Always export pmu_[un]register_sleep_notifier if CONFIG_PM setPaul Mackerras1-2/+2
This fixes a build error when building the pmac sound driver as a module for 64-bit powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08powerpc: Fix typo in pmac_cpufreq_resumePaul Mackerras1-1/+1
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] Memory Add Fixes for ppc64Mike Kravetz2-0/+2
On Tue, Nov 08, 2005 at 08:12:56AM +1100, Benjamin Herrenschmidt wrote: > Yes, the MAX_ORDER should be different indeed. But can Kconfig do that ? > That is have the default value be different based on a Kconfig option ? > I don't see that ... We may have to do things differently here... This seems to be done in other parts of the Kconfig file. Using those as an example, this should keep the MAX_ORDER block size at 16MB. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: remove some direct xmon callsAnton Blanchard2-12/+0
Even though we can enable and disable xmon at runtime now, there are a few places in the merge tree that call xmon and xmon_printf directly. In the case below we call die() which will call xmon if it is enabled. Also remove an unnecessary include of xmon.h in smp.c. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: fix oprofile sample bit handlingAnton Blanchard1-1/+23
Oprofile was hardwiring the MMCRA sample bit to 1 but on newer cpus (eg POWER5) we want to vary it based on the group being sampled. Add a temporary workaround until people update their oprofile userspace. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: fix Memory: summary lineAnton Blanchard1-1/+1
On ppc64 we end up with a negative value for the data size in the memory boot message: Memory: 2035560k/2097152k available (5792k kernel code, 89564k reserved, 18014398509481632k data, 870k bss, 352k init) It turns out the section ordering of the linker script is different on ppc32 and ppc64, so just count data as _edata - _sdata which should work on both. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc: Fix PowerBook HD led on ARCH=powerpcBenjamin Herrenschmidt1-3/+6
The PowerBook HD led code uses obsoletes device-tree accessors which do not work anymore for getting the root of the tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc: Fix ARCH=ppc build with xmonBenjamin Herrenschmidt3-5/+6
xmon() prototype is inconsistent between ARCH=ppc and ARCH=powerpc, thus causing ARCH=ppc build breakage. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc: fix a bunch of warningsBenjamin Herrenschmidt5-19/+22
Building a PowerMac kernel with ARCH=powerpc causes a bunch of warnings, this fixes some of them Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: Thermal control for SMU based machinesBenjamin Herrenschmidt13-0/+3638
This adds a new thermal control framework for PowerMac, along with the implementation for PowerMac8,1, PowerMac8,2 (iMac G5 rev 1 and 2), and PowerMac9,1 (latest single CPU desktop). In the future, I expect to move the older G5 thermal control to the new framework as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: More U3 device-tree fixesBenjamin Herrenschmidt2-2/+2
Some more U3 revisions have the missing "interrupts" property in U3, this adds them to the fixup code in prom_init.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: Update g5_defconfig for ARCH=powerpcBenjamin Herrenschmidt1-55/+206
This patch updates g5_defconfig for ARCH=powerpc in order to add the SMU support & thermal drivers to it, the pmac sound driver (works on some G5s) and replaces rivafb with nvidiafb which works better for the cards found in G5 based machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: SMU partition recoveryBenjamin Herrenschmidt10-57/+381
This patch adds the ability to the SMU driver to recover missing calibration partitions from the SMU chip itself. It also adds some dynamic mecanism to /proc/device-tree so that new properties are visible to userland. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: SMU based macs cpufreq supportBenjamin Herrenschmidt11-25/+572
CPU freq support using 970FX powertune facility for iMac G5 and SMU based single CPU desktop. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] powerpc: Fix ppc32 initrdDavid Woodhouse3-37/+41
OK, the Fedora ppc32 and ppc64 kernels should both be arch/powerpc by tomorrow. They're booting on G5, POWER5, and my powerbook. I'll test pmac SMP and Pegasos later -- but pmac smp is known broken in arch/ppc anyway, and I'll live with a potential Pegasos regression for now; it wasn't supported officially in FC4 either. I needed to fix ppc32 initrd -- we were never setting initrd_start. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08Merge ../linux-2.6Paul Mackerras1265-20025/+40841
2005-11-07[SPARC64]: Kill some unnecessary includes from ioctl32.cDavid S. Miller1-5/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07[SPARC64]: remove drm compat ioctl handlingChristoph Hellwig1-384/+0
drivers/drm/ now implements proper ->compat_ioctl methods, so this isn't needed anymore. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07[SPARC] cpwatchdog: implement ->compat_ioctlChristoph Hellwig2-3/+24
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07[SPARC] display7seg: implement ->unlocked_ioctl and ->compat_ioctlChristoph Hellwig2-15/+20
all ioctls are 32bit compat clean, so the driver can use ->compat_ioctl and ->unlocked_ioctl easily. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07[SPARC] openprom: implement ->compat_ioctlChristoph Hellwig2-18/+33
implement a compat_ioctl handle in the driver instead of having table entries in sparc64 ioctl32.c (I plan to get rid of the arch ioctl32.c file eventually) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 15:18:04 +0000