summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-09-12ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren54-238/+263
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12W1: OMAP HDQ1W: Remove dependencies to mach/hardware.hTony Lindgren1-2/+1
No need for hardcoded IRQ here. We can't include mach headers for ARM common zImage support. Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12Input: omap-keypad: Remove dependencies to mach includesTony Lindgren2-121/+35
Remove support for omap2+ as it's no longer needed since it's using matrix-keypad. This way we can remove depency to plat and mach headers which is needed for ARM common zImage support. Also remove INT_KEYBOARD by using omap_kp->irq. Note that this patch depends on an earlier patch "ARM: OMAP: Move gpio.h to include/linux/platform_data". Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Acked-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP: Move gpio.h to include/linux/platform_dataTony Lindgren28-31/+40
This way we can remove includes of plat/gpio.h which won't work with the single zImage support. Note that we also remove the cpu_class_is_omap2() check in gpio-omap.c as the drivers should not call it as we need to make it local to arch/arm/mach-omap2 for single zImage support. While at it, arrange the related includes in the standard way. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mtd@lists.infradead.org Cc: alsa-devel@alsa-project.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_endTony Lindgren21-59/+10
We can't use hardcoded interrupts for SPARSE_IRQ, and can replace the hardcoded gpio_base with twl_gpiochip.base after it's been allocated. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+: Remove unused nand_irq for GPMCTony Lindgren2-2/+0
This is no longer needed and assumes a fixed IRQ number that won't work with SPARSE_IRQ. Acked-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP2+: Make INTCPS_NR_IRQS local for mach-omap2/irq.cTony Lindgren2-3/+2
Make INTCPS_NR_IRQS local for mach-omap2/irq.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP1: Define OMAP1_INT_I2C locallyTony Lindgren1-1/+2
This is needed to start removing hardcoded IRQs for omap2+. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12ARM: OMAP1: Move define of OMAP_LCD_DMA to dma.hTony Lindgren2-1/+2
This is needed to start removing hardcoded IRQs on omap2+. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-12Merge tags 'omap-devel-gpmc-fixed-for-v3.7' and 'cleanup-omap-tags-for-v3.7' ↵Tony Lindgren434-2198/+3308
into cleanup-sparseirq Changes for GPMC (General Purpose Memory Controller) that take it closer for being just a regular device driver. Remove the ancient omap specific atags that are no longer needed. At some point we were planning to pass the bootloader information with custom atags that did not work out too well. There's no need for these any longer as the kernel has been booting fine without them for quite some time. And Now we have device tree support that can be used instead.
2012-09-11serial/8250: Limit the omap workarounds to omap1Tony Lindgren1-2/+2
These workarounds do not apply for CONFIG_ARCH_OMAP2PLUS at all, so let's make it just CONFIG_ARCH_OMAP1. This is needed to for ARM common zImage changes for omap2+ to avoid including plat and mach headers. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10ARM: OMAP: remove plat/board.h fileIgor Grinberg41-56/+0
plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: move debug_card_init() functionIgor Grinberg3-6/+10
debug_card_init() function resides in the plat/board.h file. Move it to a separate header file under plat/ so the board.h file can be removed. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10tty vt: Fix line garbage in virtual console on command line editionJean-François Moine1-61/+17
On some machines using a specific hardware for console screen output, the update of the pixel frame buffer does not work correctly when using command line edition. This may be due to a memory cache bug in the machine on which the problem has been found, but an other solution is possible. This patch proposes to avoid touching directly the pixel frame buffer and to rebuild each character using the standard putc() function on command line edition. The resulting code is smaller and not obviously slower (no read access to the pixel frame buffer). Tested on a Cubox (ARM Marvell Dove 88AP510 SoC). Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10ARM: OMAP1: move lcd pdata out of arch/arm/*Igor Grinberg12-19/+6
omap1 lcd platform data resides inside plat/board.h while it should be inside include/linux/... Move the omap1 lcd platform data to include/linux/omapfb.h. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP1: move omap1_bl pdata out of arch/arm/*Igor Grinberg7-8/+16
omap1 backlight platform data resides inside plat/board.h while it should be inside include/linux/... Move the omap1 backlight platform data to include/linux/platform_data/. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: remove the omap custom tagsIgor Grinberg2-118/+0
The omap custom initialization tags are not used anymore (if ever) by the mainline kernel. Thus remove the omap custom initialization tags. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP1: remove the crystal type tag parsingIgor Grinberg1-8/+0
The omap1 crystal setting uses the OMAP custom tags. Those tags are not used in upstream kernel and therefore the crystal type is never set by the tag parsing code on upstream kernels. Remove the crystal tag parsing code. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: remove the sti console workaroundIgor Grinberg1-10/+0
The sti console workaround uses the OMAP custom tags. Those tags are not used in upstream kernel and therefore the workaround never fires on upstream kernels. Remove the sti console workaround tags part. This leaves the workaround functional part intact so can be reused if needed. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10ARM: OMAP: omap3evm: cleanup revision bitsIgor Grinberg2-18/+12
The omap3evm has its revision information bits inside the plat/board.h file. Those bits are not used anywhere in the upstream tree besides the board-omap3evm.c file. Move the OMAP3EVM_BOARD_GEN_* bits to the board file and remove the get_omap3_evm_rev() function declaration. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10msm_serial: fix clock rate on DMA-based uartsDavid Brown1-1/+1
The driver explicitly requests a clock rate for the UART, but it is off by a factor of four from the dividers that it programs into the UART. Fix this by setting the rate to 1/4 of the current value. Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10serial: pl011: delete reset callbackLinus Walleij2-22/+0
Since commit 4fd0690bb0c3955983560bb2767ee82e2b197f9b "serial: pl011: implement workaround for CTS clear event issue" the PL011 UART is no longer at risk to hang up, so get rid of the callback altogether. Cc: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10serial: pl011: delete dangling bug flagLinus Walleij1-4/+0
The bug flag .interrupt_may_hang is not used since commit 4fd0690bb0c3955983560bb2767ee82e2b197f9b "serial: pl011: implement workaround for CTS clear event issue" so delete it. Cc: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10TTY: serial: move the dereference below the NULL testWei Yongjun2-2/+4
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10serial: omap: Request pins using pinctrl frameworkTony Lindgren1-0/+9
Request pins using pinctrl framework. Only show a warning on error as some boards set the pins in the bootloader even if CONFIG_PINCTRL is enabled. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10serial: omap: fix DeviceTree bootFelipe Balbi1-7/+13
OMAP Architecture code, passes a few function pointers for UART driver to use in order to properly implement Power Management and Wakeup capabilities. The problem is that those function pointers, which are passed (ab)using platform_data on non-DT kernels, can't be passed down to drivers through DT. commit e5b57c0 (serial: omap: define helpers for pdata function pointers) failed to take DT kernels into consideration and caused a regression to DT kernel boot. Fix that by (re-)adding a check for valid pdata pointer together with valid pdata->$FUNCTION pointer. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10ARM: OMAP: cleanup struct omap_board_config_kernelIgor Grinberg13-77/+0
struct omap_board_config_kernel defined in the board files is always empty and does not bring any added value. Remove the struct omap_board_config_kernel instances from the board files. Also remove the omap_get_nr_config() macro and the omap_get_var_config() function as both are not used for quite a long time (if ever). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-08Linux 3.6-rc5v3.6-rc5Linus Torvalds1-1/+1
2012-09-08Merge branch 'fixes-for-3.6' of ↵Linus Torvalds5-12/+120
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "Another set of fixes for ARM dma-mapping subsystem. Commit e9da6e9905e6 replaced custom consistent buffer remapping code with generic vmalloc areas. It however introduced some regressions caused by limited support for allocations in atomic context. This series contains fixes for those regressions. For some subplatforms the default, pre-allocated pool for atomic allocations turned out to be too small, so a function for setting its size has been added. Another set of patches adds support for atomic allocations to IOMMU-aware DMA-mapping implementation. The last part of this pull request contains two fixes for Contiguous Memory Allocator, which relax too strict requirements." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages() ARM: dma-mapping: Refactor out to introduce __in_atomic_pool ARM: dma-mapping: atomic_pool with struct page **pages ARM: Kirkwood: increase atomic coherent pool size ARM: DMA-Mapping: print warning when atomic coherent allocation fails ARM: DMA-Mapping: add function for setting coherent pool size from platform code ARM: relax conditions required for enabling Contiguous Memory Allocator mm: cma: fix alignment requirements for contiguous regions
2012-09-08Merge branch 'for-linus' of ↵Linus Torvalds4-2/+23
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add support for EMR on Cintiq 24HD touch Input: i8042 - add Gigabyte T1005 series netbooks to noloop table Input: imx_keypad - reset the hardware before enabling Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS
2012-09-07Merge branch 'upstream-fixes' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "It contains a fix for Eaton Ellipse MAX UPS from Alan Stern, performance improvement (not processing debug data if noone is interested), by Henrik Rydberg, and allowing tpkbd-driven devices to work even with generic driver in a crippled mode, by Andres Freund." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured HID: Only dump input if someone is listening HID: add NOGET quirk for Eaton Ellipse MAX UPS
2012-09-07serial: omap: fix compile breakageFelipe Balbi2-4/+4
when rebasing patches on top of Greg's tty-next, it looks like automerge broke a few things which I didn't catch (for whatever reason I didn't have OMAP Serial enabled on .config) so I ended up breaking the build on Greg's tty-next branch. Fix the breakage by re-adding the three missing members on struct uart_omap_port. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07HID: tpkbd: work even if the new Lenovo Keyboard driver is not configuredAndres Freund1-1/+3
c1dcad2d32d0252e8a3023d20311b52a187ecda3 added a new driver configured by HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which lead to a recognized but non-working device if the new driver wasn't configured (which is the correct default). Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-06Merge tag 'stable/for-linus-3.6-rc4-tag' of ↵Linus Torvalds4-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: * Fix for TLB flushing introduced in v3.6 * Fix Xen-SWIOTLB not using proper DMA mask - device had 64bit but in a 32-bit kernel we need to allocate for coherent pages from a 32-bit pool. * When trying to re-use P2M nodes we had a one-off error and triggered a BUG_ON check with specific CONFIG_ option. * When doing FLR in Xen-PCI-backend we would first do FLR then save the PCI configuration space. We needed to do it the other way around. * tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pciback: Fix proper FLR steps. xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory.
2012-09-06Merge tag '3.6-pci-fixes' of ↵Linus Torvalds6-14/+92
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Power management - PCI/PM: Enable D3/D3cold by default for most devices - PCI/PM: Keep parent bridge active when probing device - PCI/PM: Fix config reg access for D3cold and bridge suspending - PCI/PM: Add ABI document for sysfs file d3cold_allowed Core - PCI: Don't print anything while decoding is disabled" * tag '3.6-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't print anything while decoding is disabled PCI/PM: Add ABI document for sysfs file d3cold_allowed PCI/PM: Fix config reg access for D3cold and bridge suspending PCI/PM: Keep parent bridge active when probing device PCI/PM: Enable D3/D3cold by default for most devices
2012-09-06tty_register_device_attr updated for tty-nextTomas Hlavacek4-4/+39
Added tty_device_create_release() and bound to dev->release in tty_register_device_attr(). Added tty_port_register_device_attr() and used in uart_add_one_port() instead of tty_register_device_attr(). Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds17-27/+73
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Olof Johansson: "Mostly Renesas and Atmel bugfixes this time, targeting boot and build problems. A couple of patches for gemini and kirkwood as well. On a whole nothing very controversial." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: gemini: fix the gemini build ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order ARM: shmobile: marzen: fixup smsc911x id for regulator ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-09-06Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon fix from Guenter Roeck: "One patch, fixing DIV_ROUND_CLOSEST to support negative dividends. While the changes are not in the drivers/hwmon directory, the problem primarily affects hwmon drivers, and it makes sense to push the patch through the hwmon tree." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: linux/kernel.h: Fix DIV_ROUND_CLOSEST to support negative dividends
2012-09-06Merge branch 'rc-fixes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fixes from Michal Marek: "These are two fixes that should go into 3.6. The link-vmlinux.sh one is obvious. The other one fixes make firmware_install with certain configurations, where a file in the toplevel firmware tree gets installed first, and $(INSTALL_FW_PATH)/$$(dir <file>) results in /lib/firmware/./, which confuses make 3.82 for some reason." * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: firmware: fix directory creation rule matching with make 3.82 link-vmlinux.sh: Fix stray "echo" in error message
2012-09-06Remove user-triggerable BUG from mpol_to_strDave Jones1-1/+1
Trivially triggerable, found by trinity: kernel BUG at mm/mempolicy.c:2546! Process trinity-child2 (pid: 23988, threadinfo ffff88010197e000, task ffff88007821a670) Call Trace: show_numa_map+0xd5/0x450 show_pid_numa_map+0x13/0x20 traverse+0xf2/0x230 seq_read+0x34b/0x3e0 vfs_read+0xac/0x180 sys_pread64+0xa2/0xc0 system_call_fastpath+0x1a/0x1f RIP: mpol_to_str+0x156/0x360 Cc: stable@vger.kernel.org Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-06tty: uartclk value from serial_core exposed to sysfsTomas Hlavacek4-12/+104
Added file /sys/devices/.../tty/ttySX/uartclk to allow reading uartclk value in struct uart_port in serial_core via sysfs. tty_register_device() has been generalized and refactored in order to add support for setting drvdata and attribute_group to the device. Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: serial_core.h needs console.h included firstStephen Rothwell1-1/+1
Fixes these build errors: In file included from drivers/tty/serial/sccnxp.c:20:0: include/linux/serial_core.h: In function 'uart_handle_break': include/linux/serial_core.h:543:30: error: dereferencing pointer to incomplete type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: mxs-auart: put the device in mxs_auart_probe()Huang Shijie1-0/+1
We call the get_device() in the mxs_auart_probe(). For the balance of the reference count, we should put the device in the mxs_auart_remove(). Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: mxs-auart: fix the wrong setting orderHuang Shijie1-2/+2
After set the AUART_CTRL0_CLKGATE, the UART will gate all the clocks off. So the following line will not take effect. ................................................................ writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, u->membase + AUART_INTR_CLR); ................................................................ To fix this issue, the patch moves this gate-off line to the end of setting registers. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial_core: fix sizeof(pointer)Fengguang Wu1-1/+1
sizeof when applied to a pointer typed expression gives the size of the pointer. Generated by: scripts/coccinelle/misc/noderef.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: enable RX and TX FIFO usageFelipe Balbi1-3/+7
enable RX FIFO for 16 characters and TX FIFO for 16 spaces. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: move uart_omap_port definition to C fileFelipe Balbi2-37/+38
nobody needs to access the uart_omap_port structure other than omap-serial.c file. Let's move that structure definition to the C source file in order to prevent anyone from accessing our structure. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: remove unnecessary header and add a missing oneFelipe Balbi1-1/+1
this driver doesn't use any from <plat/dmtimer.h>, so we can remove it without any problems. This will, however cause a problem because omap-serial.c was relying on indirect inclusion of <linux/platform_device.h>, let's fix the issue by including <linux/platform_device.h> on omap-serial.c as it should be. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: fix software flow controlVikram Pandita2-8/+8
Software flow control register bits were not defined correctly. Also clarify the IXON and IXOFF logic to reflect what userspace wants. Cc: stable@vger.kernel.org Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06serial: omap: make sure to put() on poll_get_charFelipe Balbi1-2/+7
if we would reach serial_omap_get_char() while Data Ready bit isn't set, we would return from it without kicking our pm timer. This would mean we would, eventually, have an unbalanced pm_runtime_get on our device which would prevent it from ever sleeping again. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>