summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-03-19[SCSI] hpsa: fix bad endif placement in RAID 5 mapper codeStephen M. Cameron1-1/+1
It caused the i/o request to always be counted as ineligible for the accelerated i/o path on 32 bit systems and negatively affected performance. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] qla2xxx: Fix build errors related to invalid print fields on some ↵Chad Dupuis2-9/+9
architectures. Fixes some build warnings such as: drivers/scsi/qla2xxx/qla_attr.c:162:6: warning: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t'" and drivers/scsi/qla2xxx/qla_init.c:5198:7: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'uint32_t' [-Wformat] Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] bfa: Replace large udelay() with mdelay()Ben Hutchings1-1/+1
udelay() does not work on some architectures for values above 2000, in particular on ARM: ERROR: "__bad_udelay" [drivers/scsi/bfa/bfa.ko] undefined! Reported-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] vmw_pvscsi: Some improvements in pvscsi driver.Arvind Kumar2-39/+105
This change is about the following: (1) If the number of targets is 16+ then default ring_pages to 32. (2) Change default queue depth (per device) to 254. (3) Implement change_queue_depth function so that queue_depth per device can be changed at run time. Honors the request only if coming from sysfs. (4) Clean up the info returned by modinfo. Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] vmw_pvscsi: Add support for I/O requests coalescing.Rishi Mehta2-6/+60
This change allows pvscsi driver to coalesce I/O requests before issuing them. The number of I/O's coalesced can be dynamically configured based on the workload. Signed-off-by: Rishi Mehta <rmehta@vmware.com> Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] vmw_pvscsi: Fix pvscsi_abort() function.Arvind Kumar2-6/+49
This change ensures that pvscsi_abort() function returns SUCCESS only when the command in question was actually completed, otherwise returns FAILURE. The code before change, was causing a bug where driver tries to complete a command to the mid-layer while the mid-layer has already requested the driver to abort that command, in response to which the driver has responded with SUCCESS causing mid-layer to free the command struct. Signed-off-by: Arvind Kumar <arvindkumar@vmware.com> Tested-by: Ewan Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] remove deprecated IRQF_DISABLED from SCSIMichael Opdenacker24-31/+27
It's a NOOP since 2.6.35 and it will be removed one day. [jejb: remove from missed arm scsi drivers] Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] bfa: Updating Maintainers email idsAnil Gurumurthy1-2/+2
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] ipr: Add new CCIN definition for Grand Canyon supportWendy Xiong2-0/+9
Add the appropriate definition and table entry for new hardware support. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] ipr: Format HCAM overlay ID 0x21Wendy Xiong2-0/+53
This patch adds formatting error overlay 0x21 to improve debug capabilities. [jejb: checkpatch fixes] Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range()Alexander Gordeev1-29/+18
As result deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] ipr: Get rid of superfluous call to pci_disbale_msi/msix()Alexander Gordeev1-2/+0
There is no need to call pci_disable_msi() or pci_disable_msix() in case the call to pci_enable_msi() or pci_enable_msix() failed. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] ipr: Handle early EEHBrian King2-89/+179
If, when the ipr driver loads, the adapter is in an EEH error state, it will currently oops and not be able to recover, as it attempts to access memory that has not yet been allocated. We've seen this occur in some kexec scenarios. The following patch fixes the oops and also allows the driver to recover from these probe time EEH errors. [jejb: checkpatch fix] Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] ipr: Add new CCIN definition for new hardware supportWendy Xiong2-0/+3
Add the appropriate definition and table entry for new hardware support. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] ipr: Remove extended delay bit on GSCSI reads/writes opsWendy Xiong2-1/+6
This patch removes extended delay bit on GSCSI reads/writes ops, the performance will be significanly better. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] scsi_debug: add ability to enable clusteringAkinobu Mita1-0/+5
This adds a module parameter to enable clustering. Without enabling clustering support, the transfer length for read and write scsi commands is limited upto 8MB when page size is 4KB and sg_tablesize is 2048 (= SCSI_MAX_SG_CHAIN_SEGMENTS). I would like to test commands with more than that transfer length. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] scsi_debug: protect device access with atomic_rw lockAkinobu Mita1-2/+10
This change ensures that concurrent device access including ramdisk storage, protection info, and provisioning map by read, write, and unmap commands are protected with atomic_rw spinlock. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] scsi_debug: prepare to enable clusteringAkinobu Mita1-50/+59
Currently, clustering support for scsi_debug is disabled. This is because there are for_each_sg() loops which assume that each sg list element is consisted with a single page. But enabling clustering support, each sg list element for scsi commands can be consisted with multiple pages. This replaces these for_each_sg() loops with sg mapping iterator which is capable of handling each sg list element is consisted with multiple pages. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] scsi_debug: fix resp_xdwriteread() return value when running out of ↵Akinobu Mita1-2/+6
memory When resp_xdwriteread() can't allocate temporary buffer, it returns -1. But the return value is used as scsi status code and -1 is not interpreted as correct code. target_core_mod has similar xdwriteread emulation code. So this mimics what target_core_mod does for xdwriteread when running out of memory. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] scsi_debug: fix duplicate dif_errors incrementAkinobu Mita1-1/+0
It is unnecessary to increase dif_errors in dif_verify(), because the caller will increment it when dif_verify() detects failure. This bug was introduced by commit beb40ea42bd6 ("[SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write") Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] scsi_debug: make pseudo_primary staticAkinobu Mita1-1/+1
As pseudo_primary is only used in scsi_debug.c, it should be static. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-19[SCSI] scsi_debug: fix false positive logical block reference tag check failAkinobu Mita1-3/+1
Reading partially unwritten sectors generates a false positive logical block reference tag check failure when DIF is enabled. This bug is caused by missing ei_lba increment in loop of dif_verify() when unwritten sector is skipped. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] remove a useless get/put_device pair in scsi_requeue_commandChristoph Hellwig1-32/+3
Avoid a spurious device get/put pair by cleaning up scsi_requeue_command and folding scsi_unprep_request into it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] remove a useless get/put_device pair in scsi_next_commandBart Van Assche1-5/+0
Eliminate a get_device() / put_device() pair from scsi_next_command(). Both are atomic operations hence removing these slightly improves performance. [hch: slight changes due to different context] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] remove a useless get/put_device pair in scsi_request_fnBart Van Assche1-11/+3
SCSI devices may only be removed by calling scsi_remove_device(). That function must invoke blk_cleanup_queue() before the final put of sdev->sdev_gendev. Since blk_cleanup_queue() waits for the block queue to drain and then tears it down, scsi_request_fn cannot be active anymore after blk_cleanup_queue() has returned and hence the get_device()/put_device() pair in scsi_request_fn is unnecessary. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] do not manipulate device reference counts in scsi_get/put_commandChristoph Hellwig5-29/+32
Many callers won't need this and we can optimize them away. In addition the handling in the __-prefixed variants was inconsistant to start with. Based on an earlier patch from Bart Van Assche. [jejb: fix kerneldoc probelm picked up by Fengguang Wu] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] avoid taking host_lock in scsi_run_queue unless nessecaryChristoph Hellwig1-19/+24
If we don't have starved devices we don't need to take the host lock to iterate over them. Also split the function up to be more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] avoid useless free_list lock roundtripsChristoph Hellwig1-5/+6
Avoid hitting the host-wide free_list lock unless we need to put a command back onto the freelist. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: Do not zero fields of ioaccel2 command structure twiceStephen M. Cameron1-2/+0
Structure was already memset to zero at the top of hpsa_scsi_ioaccel2_queue_command Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: Add hba mode to the hpsa driverStephen M. Cameron3-4/+131
This allows exposing physical disks behind Smart Array controllers to the OS (if the controller has the right firmware and is in "hba" mode) Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: remove unused struct request from CommandListStephen M. Cameron1-3/+2
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: increase the probability of a reported success after a device resetTomas Henzl1-1/+2
rc is set in the loop, and it isn't set back to zero anywhere this patch fixes it Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: bring format-in-progress drives online when readyStephen M. Cameron3-24/+311
Do not expose drives that are undergoing a format immediately to the OS, instead wait until they are ready before bringing them online. This is so that logical drives created with "rapid parity initialization" do not get immediately kicked off the system for being unresponsive. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] hpsa: remove unused kthread.h headerStephen M. Cameron1-1/+0
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] sd: don't fail if the device doesn't recognize SYNCHRONIZE CACHEAlan Stern1-2/+2
Evidently some wacky USB-ATA bridges don't recognize the SYNCHRONIZE CACHE command, as shown in this email thread: http://marc.info/?t=138978356200002&r=1&w=2 The fact that we can't tell them to drain their caches shouldn't prevent the system from going into suspend. Therefore sd_sync_cache() shouldn't return an error if the device replies with an Invalid Command ASC. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Tested-by: Daniel Mack <zonque@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: fix problem of pm8001_work_fn reseting incorrect phy deviceXinHong Zhu1-0/+1
If a phy device is removed, the device can get error of I/O and HBA maybe receieve IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS of event which causes pm8001_work_fn to reset the phy device but in pm8001_task_exec we don't assign a value for the device field of the ccb and in other case a ccb used have device field set, when ccb is freed the field device of the ccb don't be set NULL.So there is possibility of getting another device reset in function mpi_ssp_completion. Signed-off-by: zhuxh <zxh3737@163.com> Acked-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: no need for tag allocation when issuing the command of ↵XinHong Zhu1-2/+0
unregistering device In function pm8001_dev_gone_notify we consume a tag from bitmap resource and later don't free that tag resource, so the tag resource will never be freed. In the function we don't need to use any tag to issue command for unregistering the device . Signed-off-by: XinHong Zhu <zxh3737@163.com> Acked-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] st: fix corruption of the st_modedef structures in st_set_options()Maurizio Lombardi1-2/+9
When copying the st_modedef structures the devs pointers must be preserved in the same way as with the cdevs pointers. This fixes bug 70271: https://bugzilla.kernel.org/show_bug.cgi?id=70271 [ 135.037052] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 135.045048] IP: [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150 [ 135.050999] PGD 220623067 PUD 222171067 PMD 0 [ 135.055593] Oops: 0000 [#1] SMP [ 135.058938] Modules linked in: bnx2fc cnic uio fcoe libfcoe libfc 8021q mrp scsi_transport_fc garp scsi_tgt stp llc binfmt_misc dm_round_robin dm_multipath uinput iTCO_wdt iTCO_vendor_support microcode sg pcspkr serio_raw osst st(-) i2c_i801 lpc_ich mfd_core e1000e ptp pps_core ipmi_si ipmi_msghandler video tpm_infineon ext4(F) jbd2(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) sr_mod(F) cdrom(F) pata_acpi(F) ata_generic(F) ata_piix(F) libata(F) mpt2sas(F) scsi_transport_sas(F) raid_class(F) ast(F) ttm(F) drm_kms_helper(F) drm(F) i2c_algo_bit(F) sysimgblt(F) sysfillrect(F) i2c_core(F) syscopyarea(F) dm_mirror(F) dm_region_hash(F) dm_log(F) dm_mod(F) [ 135.119686] CPU: 2 PID: 2028 Comm: rmmod Tainted: GF 3.14.0-rc1-linux-mainline+ #14 [ 135.128453] Hardware name: wortmann To be filled by O.E.M./P8B-M Series, BIOS 6103 12/06/2012 [ 135.137127] task: ffff880001de29d0 ti: ffff8802206e4000 task.ti: ffff8802206e4000 [ 135.144742] RIP: 0010:[<ffffffff812af6a1>] [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150 [ 135.153148] RSP: 0018:ffff8802206e5c98 EFLAGS: 00010282 [ 135.158562] RAX: ffff880001de29d0 RBX: 0000000000000000 RCX: 0000000000000006 [ 135.165814] RDX: 0000000000000000 RSI: ffffffff817627e0 RDI: 0000000000000000 [ 135.173040] RBP: ffff8802206e5cc8 R08: 0000000000000000 R09: 0000000000000001 [ 135.180303] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff817627e0 [ 135.187554] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 [ 135.194774] FS: 00007f817c720700(0000) GS:ffff880227200000(0000) knlGS:0000000000000000 [ 135.202995] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.208878] CR2: 0000000000000098 CR3: 00000002219b0000 CR4: 00000000000407e0 [ 135.216139] Stack: [ 135.218185] ffffffff81af63a0 0000000000000000 ffffffff817627e0 0000000000000000 [ 135.225783] 0000000000000000 0000000000000001 ffff8802206e5cf8 ffffffff812af8de [ 135.233347] ffff880226801900 ffffffff81b43320 0000000000000000 ffff880221a7c1c0 [ 135.240972] Call Trace: [ 135.243463] [<ffffffff812af8de>] kernfs_find_and_get_ns+0x3e/0x70 [ 135.249743] [<ffffffff812ae27d>] sysfs_unmerge_group+0x1d/0x60 [ 135.255716] [<ffffffff81464da9>] pm_qos_sysfs_remove_latency+0x19/0x20 [ 135.262430] [<ffffffff81466a91>] dev_pm_qos_constraints_destroy+0x31/0x1e0 [ 135.269500] [<ffffffff81464de6>] dpm_sysfs_remove+0x16/0x50 [ 135.275263] [<ffffffff8145c077>] device_del+0x47/0x1e0 [ 135.280554] [<ffffffff8145c232>] device_unregister+0x22/0x60 [ 135.286406] [<ffffffffa02e23bd>] remove_cdevs+0x4d/0x90 [st] [ 135.292247] [<ffffffffa02e78ff>] st_remove+0x3f/0xb0 [st] [ 135.297851] [<ffffffff8145f39f>] __device_release_driver+0x7f/0xf0 [ 135.304237] [<ffffffff8145f4e8>] driver_detach+0xd8/0xe0 [ 135.309722] [<ffffffff8145e0fc>] bus_remove_driver+0x5c/0xd0 [ 135.315553] [<ffffffff81460170>] driver_unregister+0x30/0x70 [ 135.321366] [<ffffffffa02e97f4>] exit_st+0x5c/0x868 [st] [ 135.326861] [<ffffffff8111b31a>] SyS_delete_module+0x19a/0x1f0 [ 135.332891] [<ffffffff810e336d>] ? trace_hardirqs_on+0xd/0x10 [ 135.338811] [<ffffffff81141974>] ? __audit_syscall_entry+0x94/0x100 [ 135.345282] [<ffffffff8135b1fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 135.351806] [<ffffffff816e8de9>] system_call_fastpath+0x16/0x1b [ 135.357859] Code: ff eb e3 0f 1f 80 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 66 66 66 66 90 <44> 0f b7 bf 98 00 00 00 8b 05 71 6d 87 00 48 89 fb 49 89 f4 49 [ 135.378282] RIP [<ffffffff812af6a1>] kernfs_find_ns+0x21/0x150 [ 135.384355] RSP <ffff8802206e5c98> [ 135.387881] CR2: 0000000000000098 [ 135.391298] ---[ end trace 1968409221ddb3c8 ]--- Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Version and Changelog updateadam radford3-4/+17
The following patch for megaraid_sas updates the driver version to v06.803.01.00-rc1, and updates Documentation/scsi/ChangeLog.megaraid_sas. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Add Dell PowerEdge VRTX SR-IOV VF supportadam radford4-118/+851
The following patch for megaraid_sas adds Dell PowerEdge VRTS SR-IOV VF support (Device ID 0x002f). This patch has some > 80 column lines that need to be left in place for code readability purposes. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Return leaked MPT frames to MPT frame pooladam radford1-2/+5
The following patch for megaraid_sas will return leaked MPT frames from any polled DCMD's that timeout to the MPT frame pool. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Fix megasas_ioc_init_fusionadam radford1-10/+7
The following patch for megaraid_sas fixes the megasas_ioc_init_fusion function to use a local stack variable for the IOCinit frame physical address instead of clobbering the first request descriptor. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Load correct raid context timeoutadam radford1-1/+4
The following patch for megaraid_sas loads the correct raid context timeout value for multpathing and clustering. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Performance boost fixesSumit.Saxena@lsi.com2-9/+42
Host lock is added back around queuecommand. Host lock removal can create race conditon between ISR path(when RAID map update interrupt is raised) and IO build path of driver, since IO build path is making use of RAID map, and in case of RAID map update interrupt, old RAID map copy is memset to zero, which some IOs may be referencing in build IO path. Changes done for performance boost- 1) Added code to set SMP IRQ affinity per CPU. 2) Pass MSI-x index, while issuing sysPD IO. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Set 32-bit DMA maskSumit.Saxena@lsi.com1-0/+13
If consistent DMA mask is set to 64 bit, fall back to 32bit DMA mask and 32bit consistent DMA mask. 64bit consistent DMA mask may be set on some 64bit DMA slot, which causes DMA offset "10000000000000" and MFI_INIT and IOCTL frames will have high memory addresses, leads to firmware FAULT. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Big endian code related fixesSumit.Saxena@lsi.com3-7/+13
Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] megaraid_sas: Don't wait forever for non-IOCTL DCMDsSumit.Saxena@lsi.com2-25/+55
Don't wait forever for firmware response for internal DCMDs sent from driver firmware. Such DCMDs will be posted to firmware with timeout. Timeout is also introduced for DCMD sent to abort the commands. DCMD sent via IOCTL path will still be always blocking to keep the IOCTL design intact. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] arcmsr: upper 32 of dma address lostDan Carpenter1-4/+3
The original code always set the upper 32 bits to zero because it was doing a shift of the wrong variable. Fixes: 1a4f550a09f8 ('[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixes') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] Add timeout to avoid infinite command retryEiichi Tsukata1-0/+7
Currently, scsi error handling in scsi_io_completion() tries to unconditionally requeue scsi command when device keeps some error state. For example, UNIT_ATTENTION causes infinite retry with action == ACTION_RETRY. This is because retryable errors are thought to be temporary and the scsi device will soon recover from those errors. Normally, such retry policy is appropriate because the device will soon recover from temporary error state. But there is no guarantee that device is able to recover from error state immediately. Some hardware error can prevent device from recovering. This patch adds timeout in scsi_io_completion() to avoid infinite command retry in scsi_io_completion(). Once scsi command retry time is longer than this timeout, the command is treated as failure. Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] iscsi_tcp: check for valid session before accessingMike Christie1-0/+3
Check that the session is setup before accessing its connection. This fixes a oops where userspace tries to get the ip address before the session is bound to a host. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>