summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-12-16ARM: tegra: add Tegra124 pinmux node to DTStephen Warren1-0/+6
Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked by: Laxman Dewangan <ldewangan@nvidia.com>
2013-12-16ARM: tegra: add APB DMA controller to Tegra124 DTStephen Warren1-0/+51
Instantiate the APB DMA controller in the Tegra124 DT, and add all DMA-related properties to other DT nodes that rely on (reference) the DMA controller's node. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-16ARM: tegra: add reset properties to Tegra124 DTsStephen Warren1-0/+11
The DT bindings now require module resets to be specified. The earlier patches which added these nodes were originally written before that requirement. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-16ARM: tegra: add clock properties for devices of Tegra124Joseph Lo2-0/+29
This patch adds clock properties for devices in the DT for basic support of Tegra124 SoC. Signed-off-by: Joseph Lo <josephl@nvidia.com> [swarren, added missing unit address to "clock" node] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: fix node sort orderStephen Warren9-332/+333
For Tegra DT files, I've been attempting to keep the nodes sorted in the order: 1) Nodes with reg, in order of reg. 2) Nodes without reg, alphabetically. This patch fixes a few escapees that I missed:-( The diffs look larger than they really are, because sometimes when one node was moved up or down, diff chose to represent this as many other nodes being moved the other way! Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: add missing unit addresses to DTStephen Warren18-146/+146
DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16ARM: tegra: add port FF to GPIO IDsAshwini Ghuge1-0/+1
NVIDIA Tegra124 supports has the new GPIO port as GPIO_FF. Add the macro for this port name. Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16spi: tegra: checking for ERR_PTR instead of NULLDan Carpenter1-2/+2
dma_request_slave_channel() returns NULL on error and not ERR_PTRs. I've fixed this by using dma_request_slave_channel_reason() which does return ERR_PTRs. Fixes: a915d150f68d ('spi: tegra: convert to standard DMA DT bindings') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-12ASoC: tegra: update module reset list for Tegra124Stephen Warren2-4/+25
Tegra124 adds a number of extra modules into the configlink bus, which must be taken out of reset before the bus is used. Update the AHUB driver to know about these extra modules (the AHUB HW module hosts the configlink bus). Based-on-work-by: Arun Shamanna Lakshmi <aruns@nvidia.com> Based-on-work-by: Songhee Baek <sbaek@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> --- This patch depends on "ASoC: tegra: use reset framework" to compile, which is ack'd and slated to go through a (large) topic branch in the Tegra tree. So, we can either: a) Merge that Tegra topic branch into the ASoC tree, then apply this. Note that I haven't created the topic branch yet, since I'm still waiting for DMA dependencies to be applied. b) Apply this change to the Tegra tree too. This change isn't directly related to the changes in the Tegra tree; it just makes use of the new reset controller feature that's introduced there.
2013-12-11clk: tegra: remove bogus PCIE_XCLKStephen Warren4-15/+2
The "pcie_xclk" clock is not actually a clock at all, but rather a reset domain. Now that the custom Tegra module reset API has been removed, we can remove the definition of any "clocks" that existed solely to support it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-11clk: tegra: remove legacy reset APIsStephen Warren4-70/+0
Now that no code uses the custom Tegra module reset API, we can remove its implementation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-11ARM: tegra: remove legacy DMA entries from DTStephen Warren3-39/+0
Now that all Tegra drivers have been converted to use DMA APIs which retrieve DMA channel information from standard DMA DT properties, we can remove all the legacy DT DMA-related properties. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11ARM: tegra: remove legacy clock entries from DTStephen Warren3-32/+6
Now that all Tegra drivers have been converted to use the common reset framework, we can remove all the legacy DT clocks/clock-names entries for "clocks" that were only used with the old custom Tegra module reset API. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11USB: EHCI: tegra: use reset frameworkStephen Warren1-3/+11
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11Input: tegra-kbc - use reset frameworkStephen Warren1-3/+10
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11serial: tegra: convert to standard DMA DT bindingsStephen Warren1-18/+6
By using dma_request_slave_channel_or_err(), the DMA slave ID can be looked up from standard DT properties, and squirrelled away during channel allocation. Hence, there's no need to use a custom DT property to store the slave ID. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11serial: tegra: use reset frameworkStephen Warren1-4/+10
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11spi: tegra: convert to standard DMA DT bindingsStephen Warren2-62/+34
By using dma_request_slave_channel_or_err(), the DMA slave ID can be looked up from standard DT properties, and squirrelled away during channel allocation. Hence, there's no need to use a custom DT property to store the slave ID. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org>
2013-12-11spi: tegra: use reset frameworkStephen Warren4-15/+42
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11staging: nvec: use reset frameworkStephen Warren2-4/+12
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11i2c: tegra: use reset frameworkStephen Warren1-3/+10
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11ASoC: tegra: convert to standard DMA DT bindingsStephen Warren8-60/+42
By passing no flags when calling snd_dmaengine_pcm_register() from tegra_pcm.c, we end up using dma_request_slave_channel() rather than dmaengine_pcm_compat_request_channel(), and hence rely on the standard DMA DT bindings and stashing the DMA slave ID away during channel allocation. This means there's no need to use a custom DT property to store the slave ID. So, remove all the code that parsed it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org>
2013-12-11ASoC: tegra: allocate AHUB FIFO during probe() not startup()Stephen Warren1-44/+47
The Tegra30 I2S driver currently allocates DMA FIFOs from the AHUB only when an audio stream starts playback. This is theoretically nice for resource sharing, but makes no practical difference for any configuration the drivers currently support. However, this deferral prevents conversion to the standard DMA DT bindings, since conversion requires knowledge of the specific DMA channel to be allocated, which in turn depends on which specific FIFO was allocated. For this reason, move the FIFO allocation into probe() to allow later conversion to the standard DMA DT bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org>
2013-12-11ASoC: tegra: call pm_runtime APIs around register accessesStephen Warren1-0/+32
Call pm_runtime_get_sync() before all register accesses; the HW requires clocks to be running when accessing registers. This hasn't been needed to date, since all register IO was performed while playback was active, and hence the ASoC core had already called pm_runtime_get(). However, an imminent future commit will allocate and set up the FIFOs and routing during probe(), when that "protection" won't be in place. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org>
2013-12-11ASoC: tegra: use reset frameworkStephen Warren3-34/+41
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. This change also renames "clock"/"clk" to "modules"/"mod" in symbols related to entries in configlink_clocks[], since: - We don't care about clock handles any more, but rather reset handles, so the old name isn't applicable. - It really is a list of modules on the bus, about which we currently only care about reset handles. If we start caring about any other aspect of the modules in the future, we won't have to rename all these symbols again. Note: The addition of "depends COMMON_CLOCK" is something that was missing before, not a new requirement. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11dma: tegra: register as an OF DMA controllerStephen Warren1-3/+36
Call of_dma_controller_register() so that DMA clients can look up the Tegra DMA controller using standard APIs. This requires the of_xlate() function to save off the DMA slave ID, and for tegra_dma_slave_config() not to over-write this information; once DMA client drivers are converted to dma_request_slave_channel() and DT-based lookups, they won't set this field of struct dma_slave_config anymore. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11dma: tegra: use reset frameworkStephen Warren1-3/+10
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com>
2013-12-11ARM: tegra: pass reset to tegra_powergate_sequence_power_up()Stephen Warren4-8/+16
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com>
2013-12-11drm/tegra: use reset frameworkStephen Warren5-6/+39
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-12-11pci: tegra: use reset frameworkStephen Warren1-14/+36
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. The old Tegra-specific API used a struct clock to represent the module to reset. Some of the clocks retrieved during probe() were only used for reset purposes, and indeed aren't even true clocks. So, there's no need to get() them any more. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com>
2013-12-11clk: tegra: implement a reset driverStephen Warren6-6/+57
The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-12-11ARM: tegra: select the reset frameworkStephen Warren1-0/+2
The Tegra clock driver is built unconditionally when Tegra support is enabled. In order to avoid having to ifdef the forthcoming reset driver implementation, have ARCH_TEGRA select RESET_CONTROLLER. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11ARM: tegra: update DT files to add DMA propertiesStephen Warren3-0/+119
This patch switches the Tegra DT files to use the standard DMA DT bindings rather than custom properties. Note that the legacy properties are not yet removed; the drivers must be updated to use the new properties first. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11ARM: tegra: update DT files to add reset propertiesStephen Warren4-4/+266
An earlier patch updated the Tegra DT bindings to require resets and reset-names properties to be filled in. This patch updates the DT files to include those properties. Note that any legacy clocks and clock-names entries that are replaced by reset properties are not yet removed; the drivers must be updated to use the new resets and reset-names properties first. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-11ARM: tegra: document use of standard DMA DT bindingsStephen Warren9-29/+73
Update all the Tegra DT bindings to require the standard dmas/dma-names properties rather than non-standard nvidia,dma-request-selector property. This is a DT-ABI-incompatible change. It is the second of two changes required for me to consider the Tegra DT bindings as stable, the other being the previous conversion to the common reset bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-11ARM: tegra: document reset properties in DT bindingsStephen Warren21-9/+181
Update all the Tegra DT bindings to require resets/reset-names properties where the HW module has reset inputs. Remove any entries from clocks or clock-names that were only required to identify reset inputs, rather than referring to real clocks. This is a DT-ABI-incompatible change. It is the first of two changes required for me to consider the Tegra DT bindings as stable, the other being conversion to the common DMA DT bindings. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-12-11ARM: tegra: add missing clock documentation to DT bindingsStephen Warren28-42/+173
Many of the Tegra DT binding documents say nothing about the clocks or clock-names properties, yet those are present and required in DT files. This patch simply updates the documentation file to match the implicit definition of the binding, based on real-world DT content. All Tegra bindings that mention clocks are updated to have consistent wording and formatting of the clock-related properties. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-12-11Merge tag 'clk-tegra-for-3.14' into for-3.14/dmas-resets-reworkStephen Warren20-3013/+5091
Tegra clk branch for 3.14
2013-12-11Merge tag 'asoc-dma-v3.14' into for-3.14/dmas-resets-reworkStephen Warren3-22/+123
ASoC: dma: Generic ASoC dmaengine driver enhancements This is the work so far on dmaengine for v3.14, it is being cross merged into the Tegra tree to support a large DMA overhaul there. The main additions are a change in the DMA request API which allows better interaction at system startup using deferred probes and methods for overriding the default device and channel names used to request DMA.
2013-12-11Merge branch 'for-3.14/deps-from-dma-of' into for-3.14/dmas-resets-reworkStephen Warren3-23/+36
This merges git://git.infradead.org/users/vkoul/slave-dma.git topic/of
2013-12-11Merge branch 'for-3.14/deps-from-dma-defer_probe' into ↵Stephen Warren3-10/+48
for-3.14/dmas-resets-rework This merges git://git.infradead.org/users/vkoul/slave-dma.git topic/defer_probe
2013-12-11ASoC: dmaengine: fix deferred probe detectionStephen Warren1-1/+1
Check the return value of dma_request_slave_channel_reason() to see if deferred probe happens, not the variable the return value will be assigned to later. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 5eda87b890f8 ("ASoC: dmaengine: support deferred probe for DMA channels") Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-11ASoC: dmaengine: support deferred probe for DMA channelsStephen Warren1-4/+16
Enhance dmaengine_pcm_request_chan_of() to support deferred probe for DMA channels, by using the new dma_request_slave_channel_or_err() API. This prevents snd_dmaengine_pcm_register() from succeeding without acquiring DMA channels due to the relevant DMA controller not yet being registered. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-11Merge branch 'topic/defer_probe' of ↵Mark Brown3-10/+48
git://git.infradead.org/users/vkoul/slave-dma into asoc-dma The following branch/patch is a dependency for my "ASoC: dmaengine: support deferred probe for DMA channels". If you could pull the branch below into your topic/dma, then merge my ASoC patch, that would be great. I would then like to merge your topic/dma into the Tegra tree as a baseline for the Tegra conversion to the standard DMA DT bindings. Vinod has confirmed this his topic/defer_probe branch is stable, and won't be rebased: https://lkml.org/lkml/2013/12/10/463
2013-12-10dma: add dma_get_any_slave_channel(), for use in of_xlate()Stephen Warren3-23/+36
mmp_pdma.c implements a custom of_xlate() function that is 95% identical to what Tegra will need. Create a function to implement the common part, so everyone doesn't just cut/paste the implementation. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-10dma: add channel request API that supports deferred probeStephen Warren3-10/+48
dma_request_slave_channel() simply returns NULL whenever DMA channel lookup fails. Lookup could fail for two distinct reasons: a) No DMA specification exists for the channel name. This includes situations where no DMA specifications exist at all, or other general lookup problems. b) A DMA specification does exist, yet the driver for that channel is not yet registered. Case (b) should trigger deferred probe in client drivers. However, since they have no way to differentiate the two situations, it cannot. Implement new function dma_request_slave_channel_reason(), which performs identically to dma_request_slave_channel(), except that it returns an error-pointer rather than NULL, which allows callers to detect when deferred probe should occur. Eventually, all drivers should be converted to this new API, the old API removed, and the new API renamed to the more desirable name. This patch doesn't convert the existing API and all drivers in one go, since some drivers call dma_request_slave_channel() then dma_request_channel() if that fails. That would require either modifying dma_request_channel() in the same way, or adding extra error-handling code to all affected drivers, and there are close to 100 drivers using the other API, rather than just the 15-20 or so that use dma_request_slave_channel(), which might be tenable in a single patch. acpi_dma_request_slave_chan_by_name() doesn't currently implement deferred probe. It should, but this will be addressed later. Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-09ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_configStephen Warren2-2/+22
Add fields to struct snd_dmaengine_pcm_config to allow custom: - DMA channel names. This is useful when the default "tx" and "rx" channel names don't apply, for example if a HW module supports multiple channels, each having different DMA channel names. This is the case with the FIFOs in Tegra's AHUB. This new facility can replace SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME. - DMA device This allows requesting DMA channels for a device other than the device which is registering the "PCM" driver. This is quite unusual, but is currently useful on Tegra. In much HW, and in Tegra20, each DAI HW module contains its own FIFOs which DMA writes to. However, in Tegra30, the DMA FIFOs were split out AHUB HW module, which then routes the data through a cross-bar, and into the DAI HW modules. However, the current ASoC driver structure does not expose this detail, and acts as if the FIFOs are still part of the DAI HW modules. Consequently, the "PCM" driver is registered with the DAI HW module, yet the DMA channels must be looked up in the AHUB HW module's device tree node. This new config field allows that to happen. Eventually, the Tegra drivers will be reworked to fully expose the AHUB, and this config field can be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09Merge remote-tracking branch 'asoc/fix/dma' into asoc-dmaMark Brown1-11/+27
2013-12-09ASoC: don't leak on error in snd_dmaengine_pcm_registerStephen Warren1-11/+27
If snd_dmaengine_pcm_register()'s call to snd_soc_add_platform() fails, all objects allocated during registration are leaked. Fix this by adding error-handling code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09ASoC: restructure dmaengine_pcm_request_chan_of()Stephen Warren1-8/+13
Restructure the internals of dmaengine_pcm_request_chan_of() as a loop over all channels to be allocated. This makes it easier to add logic that applies to all allocated channels, without having to duplicate that logic in each of the half-duplex/full-duplex paths. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-04 19:37:23 +0000