summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-03-31watchdog: iTCO_wdt: Fix the parent deviceJean Delvare1-1/+1
The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich (the PCI device.) Setting the parent right makes it much easier for the user to figure out which driver/module is handling the watchdog device node. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: it87_wdt: Work around non-working CIR interruptsMarc van der Wal2-10/+33
On some hardware platforms, the it87_wdt watchdog resets the machine despite the watchdog daemon running and writing to /dev/watchdog. This is due to Consumer IR buffer underrun interrupts being used as triggers to reset the timer. On some buggy hardware implementations such as the iEi AFL-12A-N270 single-board computer, this method does not work. However, resetting the timer by writing its original timeout value in its configuration register over and over again suppresses the unwanted reboots. Add a module option (nocir), 0 by default in order not to break existing setups. Setting it to 1 enables the workaround. Fixes bug #42801 <https://bugzilla.kernel.org/show_bug.cgi?id=42801>. Tested primarily on Linux 3.5.7, applies cleanly on Linux 3.13.5. Signed-off-by: Marc van der Wal <x0r+kernel@x0r.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: bcm281xx: Fix Kconfig dependencyMarkus Mayer1-1/+1
Use more the applicable ARCH_BCM_MOBILE option instead of ARCH_BCM as dependency for bcm_kona_wdt.c. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Check return value of clk_prepare_enableSachin Kamat1-1/+5
clk_prepare_enable can fail. Check its return value. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Remove unneeded initializationSachin Kamat1-2/+0
Initializing clk to NULL as a reset/error condition does not help as NULL is not an invalid condition w.r.t clk. Remove this initialization altogether as there is no state retention. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sunxi: Change compatiblesMaxime Ripard2-4/+4
The Allwinner A10 and A31 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the watchdog controller driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: orion: prepare new Dove DT Kconfig variableSebastian Hesselbarth1-1/+1
DT-enabled Dove will move over from ARCH_DOVE in mach-dove to MACH_DOVE in mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new DT-only MACH_DOVE Kconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: fix checkpatch warnings and errorJingoo Han6-14/+13
Fix the following checkpatch warnings and error: WARNING: quoted string split across lines WARNING: braces {} are not necessary for single statement blocks WARNING: __initdata should be placed after ibmasr_id_table[] WARNING: please, no space before tabs ERROR: do not initialise statics to 0 or NULL Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: Add tegra watchdogAndrew Chew4-0/+319
Add a driver for the hardware watchdogs in NVIDIA Tegra SoCs (Tegra30 and later). This driver will configure one watchdog timer that will reset the system in the case of a watchdog timeout. This driver binds to the nvidia,tegra30-timer device node and gets its register base from there. Signed-off-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Remove no_timeout variableMichal Simek1-9/+4
Remove no_timeout variable and check variables directly. Suggested-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Enable this driver for ZynqMichal Simek1-13/+9
Enable this driver for Zynq. Move it to architecture independent Kconfig part. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Add missing bindingMichal Simek1-0/+23
Document current driver binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Use correct comment indentationMichal Simek1-4/+4
No functional changes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Use of_property_read_u32Michal Simek1-17/+12
Use of_property_read_u32 functions to clean probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Fix all printk messagesMichal Simek1-8/+8
Use dev_ functions for printk messages. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Allocate private structure per deviceMichal Simek1-42/+55
Only one watchdog could be used by this driver. Create driver private data structure and move there all variables for one instance. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Move no_timeout to probe functionMichal Simek1-5/+3
no_timeout should be local variable because it is used only in probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Simplify probe and remove functionsMichal Simek1-32/+9
Use devm_ helper function to simplify probe and error path. Move ioremap to the beginning of probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Move control_status_reg to functionsMichal Simek1-1/+6
control_status_reg is temp variables and should be used locally by specific function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Convert driver to the watchdog frameworkMichal Simek2-172/+33
- Remove uneeded headers, fops functions - Use xilinx_wdt prefix in start/stop/keepalive functions and in new structures Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: wdt285: Fix variable typeAlexander Shiyan1-2/+1
Variable "new_margin" is checked in the function watchdog_ioctl() to be non-negative, so change its type to "int". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: shwdt: Remove unused variableAlexander Shiyan1-2/+0
Variable "wdt" is not used anywhere in the function sh_wdt_remove(). This patch removes this variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sc520_wdt: Remove unused variableAlexander Shiyan1-2/+1
Variable "dummy" is not used anywhere in the function wdt_config(). This patch removes this variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: intel_scu_watchdog: Remove unused variableAlexander Shiyan1-3/+1
Variable "hw_pre_value" is not used anywhere in the function intel_scu_set_heartbeat(). This patch removes this variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: indydog: Simplify indydog_{start,stop}Alexander Shiyan1-11/+2
This patch simplify functions indydog_start() and indydog_stop() a bit and removes excess intermediate variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: bcm63xx_wdt: Remove unused field from bcm63xx_wdt_deviceAlexander Shiyan1-1/+0
Field "default_ticks" is not used anywhere in the driver code. This patch removes this field. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sp805_wdt: Use devm_ioremap_resource()Jingoo Han1-14/+3
Use devm_ioremap_resource() in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: omap_wdt: Use devm_ioremap_resource()Jingoo Han1-16/+6
Use devm_ioremap_resource() in order to make the code simpler, and remove 'struct resource *mem' from 'struct omap_wdt_dev' and omap_wdt_probe(), resplectively. because the 'mem' variables are not used anymore. Also the redundant return value check of platform_get_resource() is removed, because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: ep93xx_wdt: Use devm_ioremap_resource()Jingoo Han1-10/+3
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: ts72xx_wdt: make 'ts72xx_wdt_pdev' staticJingoo Han1-1/+1
Make 'ts72xx_wdt_pdev' static, because it is used only in this file. It also fixes the following sparse warning. warning: symbol 'ts72xx_wdt_pdev' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: Remove unnecessary OOM messagesJingoo Han8-18/+5
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. For example, k.alloc and v.alloc failures use dump_stack(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> [for at32ap700x] Acked-by: Lubomir Rintel <lkundrak@v3.sk> [for bcm2835] Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [for sp805_wdt] Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> [for ts72xx_wdt] Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: delete non-required instances of include <linux/init.h>Paul Gortmaker24-24/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2014-03-31watchdog: mpc8xxx_wdt: MPC8xx is HW enabledChristophe Leroy1-0/+1
MPC8xx watchdog is enabled at startup by HW. If the bootloader disables it, it cannot be reenabled. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31irqchip: sun7i/sun6i: Disable NMI before registering the handlerHans de Goede1-3/+3
It is advisable to disable the NMI before registering the IRQ handler as registering the IRQ handler unmasks the IRQ on the GIC, so if U-Boot has left the NMI enabled and the NMI pin is active we will immediately get an interrupt before any driver has claimed the downstream interrupt of the NMI. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Carlo Caione <carlo@caione.org> Cc: maxime.ripard@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1395939759-11135-3-git-send-email-carlo@caione.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-31ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controllerHans de Goede1-1/+1
The IRQ line used in sun6i-a31.dtsi for the NMI controller is wrong. This causes a IRQ storm since the NMI controller is repeatedly fired. This patch fixes this problem assigning the correct IRQ number to the NMI controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Carlo Caione <carlo@caione.org> Cc: maxime.ripard@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1395939759-11135-2-git-send-email-carlo@caione.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-31arch/avr32/mm/cache.c: export symbol flush_icache_range() for module usingChen Gang1-0/+1
Need export symbol flush_icache_range() to modules, just like another platforms have done, or can not pass compiling. The related error (with allmodconfig under avr32): ERROR: "flush_icache_range" [drivers/misc/lkdtm.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2014-03-31avr32: remove cpu_data macro to fix compilesWolfram Sang2-7/+2
Having cpu_data as a parameterless macro can easily cause build failures because it can be a variable name like in linux/pm_domain.h [1]. So, remove the macro and convert its only user. Because this architecture cannot do SMP, remove the whole SMP block, too. Only compile tested due to no hardware. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> [1] https://lists.01.org/pipermail/kbuild-all/2014-February/003252.html
2014-03-30Linux 3.14v3.14Linus Torvalds1-1/+1
2014-03-30Merge branch 'for-linus-2' of ↵Linus Torvalds4-77/+134
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Switch mnt_hash to hlist, turning the races between __lookup_mnt() and hash modifications into false negatives from __lookup_mnt() (instead of hangs)" On the false negatives from __lookup_mnt(): "The *only* thing we care about is not getting stuck in __lookup_mnt(). If it misses an entry because something in front of it just got moved around, etc, we are fine. We'll notice that mount_lock mismatch and that'll be it" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch mnt_hash to hlist don't bother with propagate_mnt() unless the target is shared keep shadowed vfsmounts together resizable namespace.c hashes
2014-03-30MAINTAINERS: resume as Documentation maintainerRandy Dunlap1-2/+2
I am the new kernel tree Documentation maintainer (except for parts that are handled by other people, of course). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-30Merge branch 'for-linus' of ↵Linus Torvalds2-32/+45
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Some more updates for the input subsystem. You will get a fix for race in mousedev that has been causing quite a few oopses lately and a small fixup for force feedback support in evdev" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: mousedev - fix race when creating mixed device Input: don't modify the id of ioctl-provided ff effect on upload failure
2014-03-30AUDIT: Allow login in non-init namespacesEric Paris1-1/+11
It its possible to configure your PAM stack to refuse login if audit messages (about the login) were unable to be sent. This is common in many distros and thus normal configuration of many containers. The PAM modules determine if audit is enabled/disabled in the kernel based on the return value from sending an audit message on the netlink socket. If userspace gets back ECONNREFUSED it believes audit is disabled in the kernel. If it gets any other error else it refuses to let the login proceed. Just about ever since the introduction of namespaces the kernel audit subsystem has returned EPERM if the task sending a message was not in the init user or pid namespace. So many forms of containers have never worked if audit was enabled in the kernel. BUT if the container was not in net_init then the kernel network code would send ECONNREFUSED (instead of the audit code sending EPERM). Thus by pure accident/dumb luck/bug if an admin configured the PAM stack to reject all logins that didn't talk to audit, but then ran the login untility in the non-init_net namespace, it would work!! Clearly this was a bug, but it is a bug some people expected. With the introduction of network namespace support in 3.14-rc1 the two bugs stopped cancelling each other out. Now, containers in the non-init_net namespace refused to let users log in (just like PAM was configfured!) Obviously some people were not happy that what used to let users log in, now didn't! This fix is kinda hacky. We return ECONNREFUSED for all non-init relevant namespaces. That means that not only will the old broken non-init_net setups continue to work, now the broken non-init_pid or non-init_user setups will 'work'. They don't really work, since audit isn't logging things. But it's what most users want. In 3.15 we should have patches to support not only the non-init_net (3.14) namespace but also the non-init_pid and non-init_user namespace. So all will be right in the world. This just opens the doors wide open on 3.14 and hopefully makes users happy, if not the audit system... Reported-by: Andre Tomt <andre@tomt.net> Reported-by: Adam Richter <adam_richter2004@yahoo.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-30ext4: atomically set inode->i_flags in ext4_set_inode_flags()Theodore Ts'o2-6/+24
Use cmpxchg() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race where an immutable file has the immutable flag cleared for a brief window of time. Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-30switch mnt_hash to hlistAl Viro4-50/+61
fixes RCU bug - walking through hlist is safe in face of element moves, since it's self-terminating. Cyclic lists are not - if we end up jumping to another hash chain, we'll loop infinitely without ever hitting the original list head. [fix for dumb braino folded] Spotted by: Max Kellermann <mk@cm4all.com> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30don't bother with propagate_mnt() unless the target is sharedAl Viro1-10/+7
If the dest_mnt is not shared, propagate_mnt() does nothing - there's no mounts to propagate to and thus no copies to create. Might as well don't bother calling it in that case. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30keep shadowed vfsmounts togetherAl Viro1-9/+23
preparation to switching mnt_hash to hlist Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30resizable namespace.c hashesAl Viro2-24/+59
* switch allocation to alloc_large_system_hash() * make sizes overridable by boot parameters (mhash_entries=, mphash_entries=) * switch mountpoint_hashtable from list_head to hlist_head Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-30Merge remote-tracking branches 'spi/topic/xilinx' and 'spi/topic/xtfpga' ↵Mark Brown6-20/+205
into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/sunxi', 'spi/topic/tegra114', ↵Mark Brown13-459/+1053
'spi/topic/ti-qspi', 'spi/topic/ti-ssp', 'spi/topic/topcliff-pch', 'spi/topic/txx9', 'spi/topic/xcomm' and 'spi/topic/xfer' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/s3c64xx', 'spi/topic/sc18is602', ↵Mark Brown15-534/+449
'spi/topic/sh-hspi', 'spi/topic/sh-msiof', 'spi/topic/sh-sci', 'spi/topic/sirf' and 'spi/topic/spidev' into spi-next
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-30 11:53:18 +0000