8 files changed, 1066 insertions, 0 deletions
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 6a94f07c4164..313dc1091e6f 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -22,6 +22,7 @@ TARGETS += ir
 TARGETS += kcmp
 TARGETS += kvm
 TARGETS += lib
+TARGETS += livepatch
 TARGETS += membarrier
 TARGETS += memfd
 TARGETS += memory-hotplug
diff --git a/tools/testing/selftests/livepatch/Makefile b/tools/testing/selftests/livepatch/Makefile
new file mode 100644
index 000000000000..af4aee79bebb
--- /dev/null
+++ b/tools/testing/selftests/livepatch/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+
+TEST_GEN_PROGS := \
+	test-livepatch.sh \
+	test-callbacks.sh \
+	test-shadow-vars.sh
+
+include ../lib.mk
diff --git a/tools/testing/selftests/livepatch/README b/tools/testing/selftests/livepatch/README
new file mode 100644
index 000000000000..b73cd0e2dd51
--- /dev/null
+++ b/tools/testing/selftests/livepatch/README
@@ -0,0 +1,43 @@
+====================
+Livepatch Self Tests
+====================
+
+This is a small set of sanity tests for the kernel livepatching.
+
+The test suite loads and unloads several test kernel modules to verify
+livepatch behavior.  Debug information is logged to the kernel's message
+buffer and parsed for expected messages.  (Note: the tests will clear
+the message buffer between individual tests.)
+
+
+Config
+------
+
+Set these config options and their prerequisites:
+
+CONFIG_LIVEPATCH=y
+CONFIG_TEST_LIVEPATCH=m
+
+
+Running the tests
+-----------------
+
+Test kernel modules are built as part of lib/ (make modules) and need to
+be installed (make modules_install) as the test scripts will modprobe
+them.
+
+To run the livepatch selftests, from the top of the kernel source tree:
+
+  % make -C tools/testing/selftests TARGETS=livepatch run_tests
+
+
+Adding tests
+------------
+
+See the common functions.sh file for the existing collection of utility
+functions, most importantly set_dynamic_debug() and check_result().  The
+latter function greps the kernel's ring buffer for "livepatch:" and
+"test_klp" strings, so tests be sure to include one of those strings for
+result comparison.  Other utility functions include general module
+loading and livepatch loading helpers (waiting for patch transitions,
+sysfs entries, etc.)
diff --git a/tools/testing/selftests/livepatch/config b/tools/testing/selftests/livepatch/config
new file mode 100644
index 000000000000..0dd7700464a8
--- /dev/null
+++ b/tools/testing/selftests/livepatch/config
@@ -0,0 +1 @@
+CONFIG_TEST_LIVEPATCH=m
diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh
new file mode 100644
index 000000000000..30195449c63c
--- /dev/null
+++ b/tools/testing/selftests/livepatch/functions.sh
@@ -0,0 +1,198 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2018 Joe Lawrence <joe.lawrence@redhat.com>
+
+# Shell functions for the rest of the scripts.
+
+MAX_RETRIES=600
+RETRY_INTERVAL=".1"	# seconds
+
+# log(msg) - write message to kernel log
+#	msg - insightful words
+function log() {
+	echo "$1" > /dev/kmsg
+}
+
+# die(msg) - game over, man
+#	msg - dying words
+function die() {
+	log "ERROR: $1"
+	echo "ERROR: $1" >&2
+	exit 1
+}
+
+# set_dynamic_debug() - setup kernel dynamic debug
+#	TODO - push and pop this config?
+function set_dynamic_debug() {
+	cat << EOF > /sys/kernel/debug/dynamic_debug/control
+file kernel/livepatch/* +p
+func klp_try_switch_task -p
+EOF
+}
+
+# loop_until(cmd) - loop a command until it is successful or $MAX_RETRIES,
+#		    sleep $RETRY_INTERVAL between attempts
+#	cmd - command and its arguments to run
+function loop_until() {
+	local cmd="$*"
+	local i=0
+	while true; do
+		eval "$cmd" && return 0
+		[[ $((i++)) -eq $MAX_RETRIES ]] && return 1
+		sleep $RETRY_INTERVAL
+	done
+}
+
+function is_livepatch_mod() {
+	local mod="$1"
+
+	if [[ $(modinfo "$mod" | awk '/^livepatch:/{print $NF}') == "Y" ]]; then
+		return 0
+	fi
+
+	return 1
+}
+
+function __load_mod() {
+	local mod="$1"; shift
+
+	local msg="% modprobe $mod $*"
+	log "${msg%% }"
+	ret=$(modprobe "$mod" "$@" 2>&1)
+	if [[ "$ret" != "" ]]; then
+		die "$ret"
+	fi
+
+	# Wait for module in sysfs ...
+	loop_until '[[ -e "/sys/module/$mod" ]]' ||
+		die "failed to load module $mod"
+}
+
+
+# load_mod(modname, params) - load a kernel module
+#	modname - module name to load
+#	params  - module parameters to pass to modprobe
+function load_mod() {
+	local mod="$1"; shift
+
+	is_livepatch_mod "$mod" &&
+		die "use load_lp() to load the livepatch module $mod"
+
+	__load_mod "$mod" "$@"
+}
+
+# load_lp_nowait(modname, params) - load a kernel module with a livepatch
+#			but do not wait on until the transition finishes
+#	modname - module name to load
+#	params  - module parameters to pass to modprobe
+function load_lp_nowait() {
+	local mod="$1"; shift
+
+	is_livepatch_mod "$mod" ||
+		die "module $mod is not a livepatch"
+
+	__load_mod "$mod" "$@"
+
+	# Wait for livepatch in sysfs ...
+	loop_until '[[ -e "/sys/kernel/livepatch/$mod" ]]' ||
+		die "failed to load module $mod (sysfs)"
+}
+
+# load_lp(modname, params) - load a kernel module with a livepatch
+#	modname - module name to load
+#	params  - module parameters to pass to modprobe
+function load_lp() {
+	local mod="$1"; shift
+
+	load_lp_nowait "$mod" "$@"
+
+	# Wait until the transition finishes ...
+	loop_until 'grep -q '^0$' /sys/kernel/livepatch/$mod/transition' ||
+		die "failed to complete transition"
+}
+
+# load_failing_mod(modname, params) - load a kernel module, expect to fail
+#	modname - module name to load
+#	params  - module parameters to pass to modprobe
+function load_failing_mod() {
+	local mod="$1"; shift
+
+	local msg="% modprobe $mod $*"
+	log "${msg%% }"
+	ret=$(modprobe "$mod" "$@" 2>&1)
+	if [[ "$ret" == "" ]]; then
+		die "$mod unexpectedly loaded"
+	fi
+	log "$ret"
+}
+
+# unload_mod(modname) - unload a kernel module
+#	modname - module name to unload
+function unload_mod() {
+	local mod="$1"
+
+	# Wait for module reference count to clear ...
+	loop_until '[[ $(cat "/sys/module/$mod/refcnt") == "0" ]]' ||
+		die "failed to unload module $mod (refcnt)"
+
+	log "% rmmod $mod"
+	ret=$(rmmod "$mod" 2>&1)
+	if [[ "$ret" != "" ]]; then
+		die "$ret"
+	fi
+
+	# Wait for module in sysfs ...
+	loop_until '[[ ! -e "/sys/module/$mod" ]]' ||
+		die "failed to unload module $mod (/sys/module)"
+}
+
+# unload_lp(modname) - unload a kernel module with a livepatch
+#	modname - module name to unload
+function unload_lp() {
+	unload_mod "$1"
+}
+
+# disable_lp(modname) - disable a livepatch
+#	modname - module name to unload
+function disable_lp() {
+	local mod="$1"
+
+	log "% echo 0 > /sys/kernel/livepatch/$mod/enabled"
+	echo 0 > /sys/kernel/livepatch/"$mod"/enabled
+
+	# Wait until the transition finishes and the livepatch gets
+	# removed from sysfs...
+	loop_until '[[ ! -e "/sys/kernel/livepatch/$mod" ]]' ||
+		die "failed to disable livepatch $mod"
+}
+
+# set_pre_patch_ret(modname, pre_patch_ret)
+#	modname - module name to set
+#	pre_patch_ret - new pre_patch_ret value
+function set_pre_patch_ret {
+	local mod="$1"; shift
+	local ret="$1"
+
+	log "% echo $ret > /sys/module/$mod/parameters/pre_patch_ret"
+	echo "$ret" > /sys/module/"$mod"/parameters/pre_patch_ret
+
+	# Wait for sysfs value to hold ...
+	loop_until '[[ $(cat "/sys/module/$mod/parameters/pre_patch_ret") == "$ret" ]]' ||
+		die "failed to set pre_patch_ret parameter for $mod module"
+}
+
+# check_result() - verify dmesg output
+#	TODO - better filter, out of order msgs, etc?
+function check_result {
+	local expect="$*"
+	local result
+
+	result=$(dmesg | grep -v 'tainting' | grep -e 'livepatch:' -e 'test_klp' | sed 's/^\[[ 0-9.]*\] //')
+
+	if [[ "$expect" == "$result" ]] ; then
+		echo "ok"
+	else
+		echo -e "not ok\n\n$(diff -upr --label expected --label result <(echo "$expect") <(echo "$result"))\n"
+		die "livepatch kselftest(s) failed"
+	fi
+}
diff --git a/tools/testing/selftests/livepatch/test-callbacks.sh b/tools/testing/selftests/livepatch/test-callbacks.sh
new file mode 100755
index 000000000000..e97a9dcb73c7
--- /dev/null
+++ b/tools/testing/selftests/livepatch/test-callbacks.sh
@@ -0,0 +1,587 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2018 Joe Lawrence <joe.lawrence@redhat.com>
+
+. $(dirname $0)/functions.sh
+
+MOD_LIVEPATCH=test_klp_callbacks_demo
+MOD_LIVEPATCH2=test_klp_callbacks_demo2
+MOD_TARGET=test_klp_callbacks_mod
+MOD_TARGET_BUSY=test_klp_callbacks_busy
+
+set_dynamic_debug
+
+
+# TEST: target module before livepatch
+#
+# Test a combination of loading a kernel module and a livepatch that
+# patches a function in the first module.  Load the target module
+# before the livepatch module.  Unload them in the same order.
+#
+# - On livepatch enable, before the livepatch transition starts,
+#   pre-patch callbacks are executed for vmlinux and $MOD_TARGET (those
+#   klp_objects currently loaded).  After klp_objects are patched
+#   according to the klp_patch, their post-patch callbacks run and the
+#   transition completes.
+#
+# - Similarly, on livepatch disable, pre-patch callbacks run before the
+#   unpatching transition starts.  klp_objects are reverted, post-patch
+#   callbacks execute and the transition completes.
+
+echo -n "TEST: target module before livepatch ... "
+dmesg -C
+
+load_mod $MOD_TARGET
+load_lp $MOD_LIVEPATCH
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+unload_mod $MOD_TARGET
+
+check_result "% modprobe $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_init
+% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+$MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': patching complete
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+$MOD_LIVEPATCH: pre_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH
+% rmmod $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_exit"
+
+
+# TEST: module_coming notifier
+#
+# This test is similar to the previous test, but (un)load the livepatch
+# module before the target kernel module.  This tests the livepatch
+# core's module_coming handler.
+#
+# - On livepatch enable, only pre/post-patch callbacks are executed for
+#   currently loaded klp_objects, in this case, vmlinux.
+#
+# - When a targeted module is subsequently loaded, only its
+#   pre/post-patch callbacks are executed.
+#
+# - On livepatch disable, all currently loaded klp_objects' (vmlinux and
+#   $MOD_TARGET) pre/post-unpatch callbacks are executed.
+
+echo -n "TEST: module_coming notifier ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+load_mod $MOD_TARGET
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+unload_mod $MOD_TARGET
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': patching complete
+% modprobe $MOD_TARGET
+livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET'
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+$MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+$MOD_TARGET: ${MOD_TARGET}_init
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+$MOD_LIVEPATCH: pre_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH
+% rmmod $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_exit"
+
+
+# TEST: module_going notifier
+#
+# Test loading the livepatch after a targeted kernel module, then unload
+# the kernel module before disabling the livepatch.  This tests the
+# livepatch core's module_going handler.
+#
+# - First load a target module, then the livepatch.
+#
+# - When a target module is unloaded, the livepatch is only reverted
+#   from that klp_object ($MOD_TARGET).  As such, only its pre and
+#   post-unpatch callbacks are executed when this occurs.
+#
+# - When the livepatch is disabled, pre and post-unpatch callbacks are
+#   run for the remaining klp_object, vmlinux.
+
+echo -n "TEST: module_going notifier ... "
+dmesg -C
+
+load_mod $MOD_TARGET
+load_lp $MOD_LIVEPATCH
+unload_mod $MOD_TARGET
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+
+check_result "% modprobe $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_init
+% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+$MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': patching complete
+% rmmod $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_exit
+$MOD_LIVEPATCH: pre_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_GOING] Going away
+livepatch: reverting patch '$MOD_LIVEPATCH' on unloading module '$MOD_TARGET'
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_GOING] Going away
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH"
+
+
+# TEST: module_coming and module_going notifiers
+#
+# This test is similar to the previous test, however the livepatch is
+# loaded first.  This tests the livepatch core's module_coming and
+# module_going handlers.
+#
+# - First load the livepatch.
+#
+# - When a targeted kernel module is subsequently loaded, only its
+#   pre/post-patch callbacks are executed.
+#
+# - When the target module is unloaded, the livepatch is only reverted
+#   from the $MOD_TARGET klp_object.  As such, only pre and
+#   post-unpatch callbacks are executed when this occurs.
+
+echo -n "TEST: module_coming and module_going notifiers ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+load_mod $MOD_TARGET
+unload_mod $MOD_TARGET
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': patching complete
+% modprobe $MOD_TARGET
+livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET'
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+$MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+$MOD_TARGET: ${MOD_TARGET}_init
+% rmmod $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_exit
+$MOD_LIVEPATCH: pre_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_GOING] Going away
+livepatch: reverting patch '$MOD_LIVEPATCH' on unloading module '$MOD_TARGET'
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_GOING] Going away
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH"
+
+
+# TEST: target module not present
+#
+# A simple test of loading a livepatch without one of its patch target
+# klp_objects ever loaded ($MOD_TARGET).
+#
+# - Load the livepatch.
+#
+# - As expected, only pre/post-(un)patch handlers are executed for
+#   vmlinux.
+
+echo -n "TEST: target module not present ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': patching complete
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH"
+
+
+# TEST: pre-patch callback -ENODEV
+#
+# Test a scenario where a vmlinux pre-patch callback returns a non-zero
+# status (ie, failure).
+#
+# - First load a target module.
+#
+# - Load the livepatch module, setting its 'pre_patch_ret' value to -19
+#   (-ENODEV).  When its vmlinux pre-patch callback executes, this
+#   status code will propagate back to the module-loading subsystem.
+#   The result is that the insmod command refuses to load the livepatch
+#   module.
+
+echo -n "TEST: pre-patch callback -ENODEV ... "
+dmesg -C
+
+load_mod $MOD_TARGET
+load_failing_mod $MOD_LIVEPATCH pre_patch_ret=-19
+unload_mod $MOD_TARGET
+
+check_result "% modprobe $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_init
+% modprobe $MOD_LIVEPATCH pre_patch_ret=-19
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+test_klp_callbacks_demo: pre_patch_callback: vmlinux
+livepatch: pre-patch callback failed for object 'vmlinux'
+livepatch: failed to enable patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': canceling patching transition, going to unpatch
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+modprobe: ERROR: could not insert '$MOD_LIVEPATCH': No such device
+% rmmod $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_exit"
+
+
+# TEST: module_coming + pre-patch callback -ENODEV
+#
+# Similar to the previous test, setup a livepatch such that its vmlinux
+# pre-patch callback returns success.  However, when a targeted kernel
+# module is later loaded, have the livepatch return a failing status
+# code.
+#
+# - Load the livepatch, vmlinux pre-patch callback succeeds.
+#
+# - Set a trap so subsequent pre-patch callbacks to this livepatch will
+#   return -ENODEV.
+#
+# - The livepatch pre-patch callback for subsequently loaded target
+#   modules will return failure, so the module loader refuses to load
+#   the kernel module.  No post-patch or pre/post-unpatch callbacks are
+#   executed for this klp_object.
+#
+# - Pre/post-unpatch callbacks are run for the vmlinux klp_object.
+
+echo -n "TEST: module_coming + pre-patch callback -ENODEV ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+set_pre_patch_ret $MOD_LIVEPATCH -19
+load_failing_mod $MOD_TARGET
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': patching complete
+% echo -19 > /sys/module/$MOD_LIVEPATCH/parameters/pre_patch_ret
+% modprobe $MOD_TARGET
+livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET'
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+livepatch: pre-patch callback failed for object '$MOD_TARGET'
+livepatch: patch '$MOD_LIVEPATCH' failed for module '$MOD_TARGET', refusing to load module '$MOD_TARGET'
+modprobe: ERROR: could not insert '$MOD_TARGET': No such device
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH"
+
+
+# TEST: multiple target modules
+#
+# Test loading multiple targeted kernel modules.  This test-case is
+# mainly for comparing with the next test-case.
+#
+# - Load a target "busy" kernel module which kicks off a worker function
+#   that immediately exits.
+#
+# - Proceed with loading the livepatch and another ordinary target
+#   module.  Post-patch callbacks are executed and the transition
+#   completes quickly.
+
+echo -n "TEST: multiple target modules ... "
+dmesg -C
+
+load_mod $MOD_TARGET_BUSY sleep_secs=0
+# give $MOD_TARGET_BUSY::busymod_work_func() a chance to run
+sleep 5
+load_lp $MOD_LIVEPATCH
+load_mod $MOD_TARGET
+unload_mod $MOD_TARGET
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+unload_mod $MOD_TARGET_BUSY
+
+check_result "% modprobe $MOD_TARGET_BUSY sleep_secs=0
+$MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_init
+$MOD_TARGET_BUSY: busymod_work_func, sleeping 0 seconds ...
+$MOD_TARGET_BUSY: busymod_work_func exit
+% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+$MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': patching complete
+% modprobe $MOD_TARGET
+livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET'
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+$MOD_LIVEPATCH: post_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+$MOD_TARGET: ${MOD_TARGET}_init
+% rmmod $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_exit
+$MOD_LIVEPATCH: pre_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_GOING] Going away
+livepatch: reverting patch '$MOD_LIVEPATCH' on unloading module '$MOD_TARGET'
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_GOING] Going away
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+$MOD_LIVEPATCH: pre_unpatch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH
+% rmmod $MOD_TARGET_BUSY
+$MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_exit"
+
+
+
+# TEST: busy target module
+#
+# A similar test as the previous one, but force the "busy" kernel module
+# to do longer work.
+#
+# The livepatching core will refuse to patch a task that is currently
+# executing a to-be-patched function -- the consistency model stalls the
+# current patch transition until this safety-check is met.  Test a
+# scenario where one of a livepatch's target klp_objects sits on such a
+# function for a long time.  Meanwhile, load and unload other target
+# kernel modules while the livepatch transition is in progress.
+#
+# - Load the "busy" kernel module, this time make it do 10 seconds worth
+#   of work.
+#
+# - Meanwhile, the livepatch is loaded.  Notice that the patch
+#   transition does not complete as the targeted "busy" module is
+#   sitting on a to-be-patched function.
+#
+# - Load a second target module (this one is an ordinary idle kernel
+#   module).  Note that *no* post-patch callbacks will be executed while
+#   the livepatch is still in transition.
+#
+# - Request an unload of the simple kernel module.  The patch is still
+#   transitioning, so its pre-unpatch callbacks are skipped.
+#
+# - Finally the livepatch is disabled.  Since none of the patch's
+#   klp_object's post-patch callbacks executed, the remaining
+#   klp_object's pre-unpatch callbacks are skipped.
+
+echo -n "TEST: busy target module ... "
+dmesg -C
+
+load_mod $MOD_TARGET_BUSY sleep_secs=10
+load_lp_nowait $MOD_LIVEPATCH
+# Don't wait for transition, load $MOD_TARGET while the transition
+# is still stalled in $MOD_TARGET_BUSY::busymod_work_func()
+sleep 5
+load_mod $MOD_TARGET
+unload_mod $MOD_TARGET
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+unload_mod $MOD_TARGET_BUSY
+
+check_result "% modprobe $MOD_TARGET_BUSY sleep_secs=10
+$MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_init
+$MOD_TARGET_BUSY: busymod_work_func, sleeping 10 seconds ...
+% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+% modprobe $MOD_TARGET
+livepatch: applying patch '$MOD_LIVEPATCH' to loading module '$MOD_TARGET'
+$MOD_LIVEPATCH: pre_patch_callback: $MOD_TARGET -> [MODULE_STATE_COMING] Full formed, running module_init
+$MOD_TARGET: ${MOD_TARGET}_init
+% rmmod $MOD_TARGET
+$MOD_TARGET: ${MOD_TARGET}_exit
+livepatch: reverting patch '$MOD_LIVEPATCH' on unloading module '$MOD_TARGET'
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET -> [MODULE_STATE_GOING] Going away
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': reversing transition from patching to unpatching
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+$MOD_LIVEPATCH: post_unpatch_callback: $MOD_TARGET_BUSY -> [MODULE_STATE_LIVE] Normal state
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH
+% rmmod $MOD_TARGET_BUSY
+$MOD_TARGET_BUSY: busymod_work_func exit
+$MOD_TARGET_BUSY: ${MOD_TARGET_BUSY}_exit"
+
+
+# TEST: multiple livepatches
+#
+# Test loading multiple livepatches.  This test-case is mainly for comparing
+# with the next test-case.
+#
+# - Load and unload two livepatches, pre and post (un)patch callbacks
+#   execute as each patch progresses through its (un)patching
+#   transition.
+
+echo -n "TEST: multiple livepatches ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+load_lp $MOD_LIVEPATCH2
+disable_lp $MOD_LIVEPATCH2
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH2
+unload_lp $MOD_LIVEPATCH
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': patching complete
+% modprobe $MOD_LIVEPATCH2
+livepatch: enabling patch '$MOD_LIVEPATCH2'
+livepatch: '$MOD_LIVEPATCH2': initializing patching transition
+$MOD_LIVEPATCH2: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': starting patching transition
+livepatch: '$MOD_LIVEPATCH2': completing patching transition
+$MOD_LIVEPATCH2: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': patching complete
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH2/enabled
+livepatch: '$MOD_LIVEPATCH2': initializing unpatching transition
+$MOD_LIVEPATCH2: pre_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH2': completing unpatching transition
+$MOD_LIVEPATCH2: post_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': unpatching complete
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+$MOD_LIVEPATCH: pre_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+$MOD_LIVEPATCH: post_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH2
+% rmmod $MOD_LIVEPATCH"
+
+
+# TEST: atomic replace
+#
+# Load multiple livepatches, but the second as an 'atomic-replace'
+# patch.  When the latter loads, the original livepatch should be
+# disabled and *none* of its pre/post-unpatch callbacks executed.  On
+# the other hand, when the atomic-replace livepatch is disabled, its
+# pre/post-unpatch callbacks *should* be executed.
+#
+# - Load and unload two livepatches, the second of which has its
+#   .replace flag set true.
+#
+# - Pre and post patch callbacks are executed for both livepatches.
+#
+# - Once the atomic replace module is loaded, only its pre and post
+#   unpatch callbacks are executed.
+
+echo -n "TEST: atomic replace ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+load_lp $MOD_LIVEPATCH2 replace=1
+disable_lp $MOD_LIVEPATCH2
+unload_lp $MOD_LIVEPATCH2
+unload_lp $MOD_LIVEPATCH
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+$MOD_LIVEPATCH: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+$MOD_LIVEPATCH: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH': patching complete
+% modprobe $MOD_LIVEPATCH2 replace=1
+livepatch: enabling patch '$MOD_LIVEPATCH2'
+livepatch: '$MOD_LIVEPATCH2': initializing patching transition
+$MOD_LIVEPATCH2: pre_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': starting patching transition
+livepatch: '$MOD_LIVEPATCH2': completing patching transition
+$MOD_LIVEPATCH2: post_patch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': patching complete
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH2/enabled
+livepatch: '$MOD_LIVEPATCH2': initializing unpatching transition
+$MOD_LIVEPATCH2: pre_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH2': completing unpatching transition
+$MOD_LIVEPATCH2: post_unpatch_callback: vmlinux
+livepatch: '$MOD_LIVEPATCH2': unpatching complete
+% rmmod $MOD_LIVEPATCH2
+% rmmod $MOD_LIVEPATCH"
+
+
+exit 0
diff --git a/tools/testing/selftests/livepatch/test-livepatch.sh b/tools/testing/selftests/livepatch/test-livepatch.sh
new file mode 100755
index 000000000000..f05268aea859
--- /dev/null
+++ b/tools/testing/selftests/livepatch/test-livepatch.sh
@@ -0,0 +1,168 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2018 Joe Lawrence <joe.lawrence@redhat.com>
+
+. $(dirname $0)/functions.sh
+
+MOD_LIVEPATCH=test_klp_livepatch
+MOD_REPLACE=test_klp_atomic_replace
+
+set_dynamic_debug
+
+
+# TEST: basic function patching
+# - load a livepatch that modifies the output from /proc/cmdline and
+#   verify correct behavior
+# - unload the livepatch and make sure the patch was removed
+
+echo -n "TEST: basic function patching ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+
+if [[ "$(cat /proc/cmdline)" != "$MOD_LIVEPATCH: this has been live patched" ]] ; then
+	echo -e "FAIL\n\n"
+	die "livepatch kselftest(s) failed"
+fi
+
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+
+if [[ "$(cat /proc/cmdline)" == "$MOD_LIVEPATCH: this has been live patched" ]] ; then
+	echo -e "FAIL\n\n"
+	die "livepatch kselftest(s) failed"
+fi
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+livepatch: '$MOD_LIVEPATCH': patching complete
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH"
+
+
+# TEST: multiple livepatches
+# - load a livepatch that modifies the output from /proc/cmdline and
+#   verify correct behavior
+# - load another livepatch and verify that both livepatches are active
+# - unload the second livepatch and verify that the first is still active
+# - unload the first livepatch and verify none are active
+
+echo -n "TEST: multiple livepatches ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+load_lp $MOD_REPLACE replace=0
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+disable_lp $MOD_REPLACE
+unload_lp $MOD_REPLACE
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+disable_lp $MOD_LIVEPATCH
+unload_lp $MOD_LIVEPATCH
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+livepatch: '$MOD_LIVEPATCH': patching complete
+$MOD_LIVEPATCH: this has been live patched
+% modprobe $MOD_REPLACE replace=0
+livepatch: enabling patch '$MOD_REPLACE'
+livepatch: '$MOD_REPLACE': initializing patching transition
+livepatch: '$MOD_REPLACE': starting patching transition
+livepatch: '$MOD_REPLACE': completing patching transition
+livepatch: '$MOD_REPLACE': patching complete
+$MOD_LIVEPATCH: this has been live patched
+$MOD_REPLACE: this has been live patched
+% echo 0 > /sys/kernel/livepatch/$MOD_REPLACE/enabled
+livepatch: '$MOD_REPLACE': initializing unpatching transition
+livepatch: '$MOD_REPLACE': starting unpatching transition
+livepatch: '$MOD_REPLACE': completing unpatching transition
+livepatch: '$MOD_REPLACE': unpatching complete
+% rmmod $MOD_REPLACE
+$MOD_LIVEPATCH: this has been live patched
+% echo 0 > /sys/kernel/livepatch/$MOD_LIVEPATCH/enabled
+livepatch: '$MOD_LIVEPATCH': initializing unpatching transition
+livepatch: '$MOD_LIVEPATCH': starting unpatching transition
+livepatch: '$MOD_LIVEPATCH': completing unpatching transition
+livepatch: '$MOD_LIVEPATCH': unpatching complete
+% rmmod $MOD_LIVEPATCH"
+
+
+# TEST: atomic replace livepatch
+# - load a livepatch that modifies the output from /proc/cmdline and
+#   verify correct behavior
+# - load an atomic replace livepatch and verify that only the second is active
+# - remove the first livepatch and verify that the atomic replace livepatch
+#   is still active
+# - remove the atomic replace livepatch and verify that none are active
+
+echo -n "TEST: atomic replace livepatch ... "
+dmesg -C
+
+load_lp $MOD_LIVEPATCH
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+load_lp $MOD_REPLACE replace=1
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+unload_lp $MOD_LIVEPATCH
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+disable_lp $MOD_REPLACE
+unload_lp $MOD_REPLACE
+
+grep 'live patched' /proc/cmdline > /dev/kmsg
+grep 'live patched' /proc/meminfo > /dev/kmsg
+
+check_result "% modprobe $MOD_LIVEPATCH
+livepatch: enabling patch '$MOD_LIVEPATCH'
+livepatch: '$MOD_LIVEPATCH': initializing patching transition
+livepatch: '$MOD_LIVEPATCH': starting patching transition
+livepatch: '$MOD_LIVEPATCH': completing patching transition
+livepatch: '$MOD_LIVEPATCH': patching complete
+$MOD_LIVEPATCH: this has been live patched
+% modprobe $MOD_REPLACE replace=1
+livepatch: enabling patch '$MOD_REPLACE'
+livepatch: '$MOD_REPLACE': initializing patching transition
+livepatch: '$MOD_REPLACE': starting patching transition
+livepatch: '$MOD_REPLACE': completing patching transition
+livepatch: '$MOD_REPLACE': patching complete
+$MOD_REPLACE: this has been live patched
+% rmmod $MOD_LIVEPATCH
+$MOD_REPLACE: this has been live patched
+% echo 0 > /sys/kernel/livepatch/$MOD_REPLACE/enabled
+livepatch: '$MOD_REPLACE': initializing unpatching transition
+livepatch: '$MOD_REPLACE': starting unpatching transition
+livepatch: '$MOD_REPLACE': completing unpatching transition
+livepatch: '$MOD_REPLACE': unpatching complete
+% rmmod $MOD_REPLACE"
+
+
+exit 0
diff --git a/tools/testing/selftests/livepatch/test-shadow-vars.sh b/tools/testing/selftests/livepatch/test-shadow-vars.sh
new file mode 100755
index 000000000000..04a37831e204
--- /dev/null
+++ b/tools/testing/selftests/livepatch/test-shadow-vars.sh
@@ -0,0 +1,60 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2018 Joe Lawrence <joe.lawrence@redhat.com>
+
+. $(dirname $0)/functions.sh
+
+MOD_TEST=test_klp_shadow_vars
+
+set_dynamic_debug
+
+
+# TEST: basic shadow variable API
+# - load a module that exercises the shadow variable API
+
+echo -n "TEST: basic shadow variable API ... "
+dmesg -C
+
+load_mod $MOD_TEST
+unload_mod $MOD_TEST
+
+check_result "% modprobe $MOD_TEST
+$MOD_TEST: klp_shadow_get(obj=PTR5, id=0x1234) = PTR0
+$MOD_TEST:   got expected NULL result
+$MOD_TEST: shadow_ctor: PTR6 -> PTR1
+$MOD_TEST: klp_shadow_alloc(obj=PTR5, id=0x1234, size=8, gfp_flags=GFP_KERNEL), ctor=PTR7, ctor_data=PTR1 = PTR6
+$MOD_TEST: shadow_ctor: PTR8 -> PTR2
+$MOD_TEST: klp_shadow_alloc(obj=PTR9, id=0x1234, size=8, gfp_flags=GFP_KERNEL), ctor=PTR7, ctor_data=PTR2 = PTR8
+$MOD_TEST: shadow_ctor: PTR10 -> PTR3
+$MOD_TEST: klp_shadow_alloc(obj=PTR5, id=0x1235, size=8, gfp_flags=GFP_KERNEL), ctor=PTR7, ctor_data=PTR3 = PTR10
+$MOD_TEST: klp_shadow_get(obj=PTR5, id=0x1234) = PTR6
+$MOD_TEST:   got expected PTR6 -> PTR1 result
+$MOD_TEST: klp_shadow_get(obj=PTR9, id=0x1234) = PTR8
+$MOD_TEST:   got expected PTR8 -> PTR2 result
+$MOD_TEST: klp_shadow_get(obj=PTR5, id=0x1235) = PTR10
+$MOD_TEST:   got expected PTR10 -> PTR3 result
+$MOD_TEST: shadow_ctor: PTR11 -> PTR4
+$MOD_TEST: klp_shadow_get_or_alloc(obj=PTR12, id=0x1234, size=8, gfp_flags=GFP_KERNEL), ctor=PTR7, ctor_data=PTR4 = PTR11
+$MOD_TEST: klp_shadow_get_or_alloc(obj=PTR12, id=0x1234, size=8, gfp_flags=GFP_KERNEL), ctor=PTR7, ctor_data=PTR4 = PTR11
+$MOD_TEST:   got expected PTR11 -> PTR4 result
+$MOD_TEST: shadow_dtor(obj=PTR5, shadow_data=PTR6)
+$MOD_TEST: klp_shadow_free(obj=PTR5, id=0x1234, dtor=PTR13)
+$MOD_TEST: klp_shadow_get(obj=PTR5, id=0x1234) = PTR0
+$MOD_TEST:   got expected NULL result
+$MOD_TEST: shadow_dtor(obj=PTR9, shadow_data=PTR8)
+$MOD_TEST: klp_shadow_free(obj=PTR9, id=0x1234, dtor=PTR13)
+$MOD_TEST: klp_shadow_get(obj=PTR9, id=0x1234) = PTR0
+$MOD_TEST:   got expected NULL result
+$MOD_TEST: shadow_dtor(obj=PTR12, shadow_data=PTR11)
+$MOD_TEST: klp_shadow_free(obj=PTR12, id=0x1234, dtor=PTR13)
+$MOD_TEST: klp_shadow_get(obj=PTR12, id=0x1234) = PTR0
+$MOD_TEST:   got expected NULL result
+$MOD_TEST: klp_shadow_get(obj=PTR5, id=0x1235) = PTR10
+$MOD_TEST:   got expected PTR10 -> PTR3 result
+$MOD_TEST: shadow_dtor(obj=PTR5, shadow_data=PTR10)
+$MOD_TEST: klp_shadow_free_all(id=0x1235, dtor=PTR13)
+$MOD_TEST: klp_shadow_get(obj=PTR5, id=0x1234) = PTR0
+$MOD_TEST:   shadow_get() got expected NULL result
+% rmmod test_klp_shadow_vars"
+
+exit 0