diff options
Diffstat (limited to 'tools')
584 files changed, 37091 insertions, 10981 deletions
diff --git a/tools/arch/arc/include/uapi/asm/unistd.h b/tools/arch/arc/include/uapi/asm/unistd.h new file mode 100644 index 000000000000..5eafa1115162 --- /dev/null +++ b/tools/arch/arc/include/uapi/asm/unistd.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/******** no-legacy-syscalls-ABI *******/ + +/* + * Non-typical guard macro to enable inclusion twice in ARCH sys.c + * That is how the Generic syscall wrapper generator works + */ +#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL) +#define _UAPI_ASM_ARC_UNISTD_H + +#define __ARCH_WANT_RENAMEAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SET_GET_RLIMIT +#define __ARCH_WANT_SYS_EXECVE +#define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_VFORK +#define __ARCH_WANT_SYS_FORK +#define __ARCH_WANT_TIME32_SYSCALLS + +#define sys_mmap2 sys_mmap_pgoff + +#include <asm-generic/unistd.h> + +#define NR_syscalls __NR_syscalls + +/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */ +#define __NR_sysfs (__NR_arch_specific_syscall + 3) + +/* ARC specific syscall */ +#define __NR_cacheflush (__NR_arch_specific_syscall + 0) +#define __NR_arc_settls (__NR_arch_specific_syscall + 1) +#define __NR_arc_gettls (__NR_arch_specific_syscall + 2) +#define __NR_arc_usr_cmpxchg (__NR_arch_specific_syscall + 4) + +__SYSCALL(__NR_cacheflush, sys_cacheflush) +__SYSCALL(__NR_arc_settls, sys_arc_settls) +__SYSCALL(__NR_arc_gettls, sys_arc_gettls) +__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg) +__SYSCALL(__NR_sysfs, sys_sysfs) + +#undef __SYSCALL + +#endif diff --git a/tools/arch/arm64/include/asm/barrier.h b/tools/arch/arm64/include/asm/barrier.h index 378c051fa177..3b9b41331c4f 100644 --- a/tools/arch/arm64/include/asm/barrier.h +++ b/tools/arch/arm64/include/asm/barrier.h @@ -14,6 +14,16 @@ #define wmb() asm volatile("dmb ishst" ::: "memory") #define rmb() asm volatile("dmb ishld" ::: "memory") +/* + * Kernel uses dmb variants on arm64 for smp_*() barriers. Pretty much the same + * implementation as above mb()/wmb()/rmb(), though for the latter kernel uses + * dsb. In any case, should above mb()/wmb()/rmb() change, make sure the below + * smp_*() don't. + */ +#define smp_mb() asm volatile("dmb ish" ::: "memory") +#define smp_wmb() asm volatile("dmb ishst" ::: "memory") +#define smp_rmb() asm volatile("dmb ishld" ::: "memory") + #define smp_store_release(p, v) \ do { \ union { typeof(*p) __val; char __c[1]; } __u = \ diff --git a/tools/arch/csky/include/uapi/asm/perf_regs.h b/tools/arch/csky/include/uapi/asm/perf_regs.h new file mode 100644 index 000000000000..ee323d818592 --- /dev/null +++ b/tools/arch/csky/include/uapi/asm/perf_regs.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// Copyright (C) 2019 Hangzhou C-SKY Microsystems co.,ltd. + +#ifndef _ASM_CSKY_PERF_REGS_H +#define _ASM_CSKY_PERF_REGS_H + +/* Index of struct pt_regs */ +enum perf_event_csky_regs { + PERF_REG_CSKY_TLS, + PERF_REG_CSKY_LR, + PERF_REG_CSKY_PC, + PERF_REG_CSKY_SR, + PERF_REG_CSKY_SP, + PERF_REG_CSKY_ORIG_A0, + PERF_REG_CSKY_A0, + PERF_REG_CSKY_A1, + PERF_REG_CSKY_A2, + PERF_REG_CSKY_A3, + PERF_REG_CSKY_REGS0, + PERF_REG_CSKY_REGS1, + PERF_REG_CSKY_REGS2, + PERF_REG_CSKY_REGS3, + PERF_REG_CSKY_REGS4, + PERF_REG_CSKY_REGS5, + PERF_REG_CSKY_REGS6, + PERF_REG_CSKY_REGS7, + PERF_REG_CSKY_REGS8, + PERF_REG_CSKY_REGS9, +#if defined(__CSKYABIV2__) + PERF_REG_CSKY_EXREGS0, + PERF_REG_CSKY_EXREGS1, + PERF_REG_CSKY_EXREGS2, + PERF_REG_CSKY_EXREGS3, + PERF_REG_CSKY_EXREGS4, + PERF_REG_CSKY_EXREGS5, + PERF_REG_CSKY_EXREGS6, + PERF_REG_CSKY_EXREGS7, + PERF_REG_CSKY_EXREGS8, + PERF_REG_CSKY_EXREGS9, + PERF_REG_CSKY_EXREGS10, + PERF_REG_CSKY_EXREGS11, + PERF_REG_CSKY_EXREGS12, + PERF_REG_CSKY_EXREGS13, + PERF_REG_CSKY_EXREGS14, + PERF_REG_CSKY_HI, + PERF_REG_CSKY_LO, + PERF_REG_CSKY_DCSR, +#endif + PERF_REG_CSKY_MAX, +}; +#endif /* _ASM_CSKY_PERF_REGS_H */ diff --git a/tools/arch/hexagon/include/uapi/asm/unistd.h b/tools/arch/hexagon/include/uapi/asm/unistd.h new file mode 100644 index 000000000000..432c4db1b623 --- /dev/null +++ b/tools/arch/hexagon/include/uapi/asm/unistd.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Syscall support for Hexagon + * + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +/* + * The kernel pulls this unistd.h in three different ways: + * 1. the "normal" way which gets all the __NR defines + * 2. with __SYSCALL defined to produce function declarations + * 3. with __SYSCALL defined to produce syscall table initialization + * See also: syscalltab.c + */ + +#define sys_mmap2 sys_mmap_pgoff +#define __ARCH_WANT_RENAMEAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SET_GET_RLIMIT +#define __ARCH_WANT_SYS_EXECVE +#define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_VFORK +#define __ARCH_WANT_SYS_FORK +#define __ARCH_WANT_TIME32_SYSCALLS + +#include <asm-generic/unistd.h> diff --git a/tools/arch/riscv/include/uapi/asm/unistd.h b/tools/arch/riscv/include/uapi/asm/unistd.h new file mode 100644 index 000000000000..0e2eeeb1fd27 --- /dev/null +++ b/tools/arch/riscv/include/uapi/asm/unistd.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2018 David Abdurachmanov <david.abdurachmanov@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef __LP64__ +#define __ARCH_WANT_NEW_STAT +#define __ARCH_WANT_SET_GET_RLIMIT +#endif /* __LP64__ */ + +#include <asm-generic/unistd.h> + +/* + * Allows the instruction cache to be flushed from userspace. Despite RISC-V + * having a direct 'fence.i' instruction available to userspace (which we + * can't trap!), that's not actually viable when running on Linux because the + * kernel might schedule a process on another hart. There is no way for + * userspace to handle this without invoking the kernel (as it doesn't know the + * thread->hart mappings), so we've defined a RISC-V specific system call to + * flush the instruction cache. + * + * __NR_riscv_flush_icache is defined to flush the instruction cache over an + * address range, with the flush applying to either all threads or just the + * caller. We don't currently do anything with the address range, that's just + * in there for forwards compatibility. + */ +#ifndef __NR_riscv_flush_icache +#define __NR_riscv_flush_icache (__NR_arch_specific_syscall + 15) +#endif +__SYSCALL(__NR_riscv_flush_icache, sys_riscv_flush_icache) diff --git a/tools/arch/s390/include/uapi/asm/kvm.h b/tools/arch/s390/include/uapi/asm/kvm.h index 16511d97e8dc..09652eabe769 100644 --- a/tools/arch/s390/include/uapi/asm/kvm.h +++ b/tools/arch/s390/include/uapi/asm/kvm.h @@ -152,7 +152,8 @@ struct kvm_s390_vm_cpu_subfunc { __u8 pcc[16]; /* with MSA4 */ __u8 ppno[16]; /* with MSA5 */ __u8 kma[16]; /* with MSA8 */ - __u8 reserved[1808]; + __u8 kdsa[16]; /* with MSA9 */ + __u8 reserved[1792]; }; /* kvm attributes for crypto */ diff --git a/tools/arch/x86/include/asm/barrier.h b/tools/arch/x86/include/asm/barrier.h index 58919868473c..0adf295dd5b6 100644 --- a/tools/arch/x86/include/asm/barrier.h +++ b/tools/arch/x86/include/asm/barrier.h @@ -21,9 +21,12 @@ #define rmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory") #define wmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory") #elif defined(__x86_64__) -#define mb() asm volatile("mfence":::"memory") -#define rmb() asm volatile("lfence":::"memory") +#define mb() asm volatile("mfence" ::: "memory") +#define rmb() asm volatile("lfence" ::: "memory") #define wmb() asm volatile("sfence" ::: "memory") +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_mb() asm volatile("lock; addl $0,-132(%%rsp)" ::: "memory", "cc") #endif #if defined(__x86_64__) diff --git a/tools/arch/x86/include/uapi/asm/kvm.h b/tools/arch/x86/include/uapi/asm/kvm.h index dabfcf7c3941..7a0e64ccd6ff 100644 --- a/tools/arch/x86/include/uapi/asm/kvm.h +++ b/tools/arch/x86/include/uapi/asm/kvm.h @@ -381,6 +381,7 @@ struct kvm_sync_regs { #define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0) #define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1) #define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2) +#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3) #define KVM_STATE_NESTED_GUEST_MODE 0x00000001 #define KVM_STATE_NESTED_RUN_PENDING 0x00000002 diff --git a/tools/arch/x86/include/uapi/asm/perf_regs.h b/tools/arch/x86/include/uapi/asm/perf_regs.h index f3329cabce5c..ac67bbea10ca 100644 --- a/tools/arch/x86/include/uapi/asm/perf_regs.h +++ b/tools/arch/x86/include/uapi/asm/perf_regs.h @@ -27,8 +27,29 @@ enum perf_event_x86_regs { PERF_REG_X86_R13, PERF_REG_X86_R14, PERF_REG_X86_R15, - + /* These are the limits for the GPRs. */ PERF_REG_X86_32_MAX = PERF_REG_X86_GS + 1, PERF_REG_X86_64_MAX = PERF_REG_X86_R15 + 1, + + /* These all need two bits set because they are 128bit */ + PERF_REG_X86_XMM0 = 32, + PERF_REG_X86_XMM1 = 34, + PERF_REG_X86_XMM2 = 36, + PERF_REG_X86_XMM3 = 38, + PERF_REG_X86_XMM4 = 40, + PERF_REG_X86_XMM5 = 42, + PERF_REG_X86_XMM6 = 44, + PERF_REG_X86_XMM7 = 46, + PERF_REG_X86_XMM8 = 48, + PERF_REG_X86_XMM9 = 50, + PERF_REG_X86_XMM10 = 52, + PERF_REG_X86_XMM11 = 54, + PERF_REG_X86_XMM12 = 56, + PERF_REG_X86_XMM13 = 58, + PERF_REG_X86_XMM14 = 60, + PERF_REG_X86_XMM15 = 62, + + /* These include both GPRs and XMMX registers */ + PERF_REG_X86_XMM_MAX = PERF_REG_X86_XMM15 + 2, }; #endif /* _ASM_X86_PERF_REGS_H */ diff --git a/tools/arch/x86/include/uapi/asm/vmx.h b/tools/arch/x86/include/uapi/asm/vmx.h index f0b0c90dd398..d213ec5c3766 100644 --- a/tools/arch/x86/include/uapi/asm/vmx.h +++ b/tools/arch/x86/include/uapi/asm/vmx.h @@ -146,6 +146,7 @@ #define VMX_ABORT_SAVE_GUEST_MSR_FAIL 1 #define VMX_ABORT_LOAD_HOST_PDPTE_FAIL 2 +#define VMX_ABORT_VMCS_CORRUPTED 3 #define VMX_ABORT_LOAD_HOST_MSR_FAIL 4 #endif /* _UAPIVMX_H */ diff --git a/tools/arch/x86/lib/memcpy_64.S b/tools/arch/x86/lib/memcpy_64.S index 3b24dc05251c..92748660ba51 100644 --- a/tools/arch/x86/lib/memcpy_64.S +++ b/tools/arch/x86/lib/memcpy_64.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* Copyright 2002 Andi Kleen */ #include <linux/linkage.h> @@ -257,6 +258,7 @@ ENTRY(__memcpy_mcsafe) /* Copy successful. Return zero */ .L_done_memcpy_trap: xorl %eax, %eax +.L_done: ret ENDPROC(__memcpy_mcsafe) EXPORT_SYMBOL_GPL(__memcpy_mcsafe) @@ -273,7 +275,7 @@ EXPORT_SYMBOL_GPL(__memcpy_mcsafe) addl %edx, %ecx .E_trailing_bytes: mov %ecx, %eax - ret + jmp .L_done /* * For write fault handling, given the destination is unaligned, diff --git a/tools/bpf/Makefile.helpers b/tools/bpf/Makefile.helpers index c34fea77f39f..854d084026dd 100644 --- a/tools/bpf/Makefile.helpers +++ b/tools/bpf/Makefile.helpers @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifndef allow-override include ../scripts/Makefile.include include ../scripts/utilities.mak diff --git a/tools/bpf/bpftool/.gitignore b/tools/bpf/bpftool/.gitignore index 67167e44b726..8248b8dd89d4 100644 --- a/tools/bpf/bpftool/.gitignore +++ b/tools/bpf/bpftool/.gitignore @@ -1,5 +1,5 @@ *.d -bpftool +/bpftool bpftool*.8 bpf-helpers.* FEATURE-DUMP.bpftool diff --git a/tools/bpf/bpftool/Documentation/Makefile b/tools/bpf/bpftool/Documentation/Makefile index f7663a3e60c9..815ac9804aee 100644 --- a/tools/bpf/bpftool/Documentation/Makefile +++ b/tools/bpf/bpftool/Documentation/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only include ../../../scripts/Makefile.include include ../../../scripts/utilities.mak diff --git a/tools/bpf/bpftool/Documentation/bpftool-btf.rst b/tools/bpf/bpftool/Documentation/bpftool-btf.rst new file mode 100644 index 000000000000..2dbc1413fabd --- /dev/null +++ b/tools/bpf/bpftool/Documentation/bpftool-btf.rst @@ -0,0 +1,222 @@ +================ +bpftool-btf +================ +------------------------------------------------------------------------------- +tool for inspection of BTF data +------------------------------------------------------------------------------- + +:Manual section: 8 + +SYNOPSIS +======== + + **bpftool** [*OPTIONS*] **btf** *COMMAND* + + *OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] } + + *COMMANDS* := { **dump** | **help** } + +BTF COMMANDS +============= + +| **bpftool** **btf dump** *BTF_SRC* +| **bpftool** **btf help** +| +| *BTF_SRC* := { **id** *BTF_ID* | **prog** *PROG* | **map** *MAP* [{**key** | **value** | **kv** | **all**}] | **file** *FILE* } +| *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } +| *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* } + +DESCRIPTION +=========== + **bpftool btf dump** *BTF_SRC* + Dump BTF entries from a given *BTF_SRC*. + + When **id** is specified, BTF object with that ID will be + loaded and all its BTF types emitted. + + When **map** is provided, it's expected that map has + associated BTF object with BTF types describing key and + value. It's possible to select whether to dump only BTF + type(s) associated with key (**key**), value (**value**), + both key and value (**kv**), or all BTF types present in + associated BTF object (**all**). If not specified, **kv** + is assumed. + + When **prog** is provided, it's expected that program has + associated BTF object with BTF types. + + When specifying *FILE*, an ELF file is expected, containing + .BTF section with well-defined BTF binary format data, + typically produced by clang or pahole. + + **bpftool btf help** + Print short help message. + +OPTIONS +======= + -h, --help + Print short generic help message (similar to **bpftool help**). + + -V, --version + Print version number (similar to **bpftool version**). + + -j, --json + Generate JSON output. For commands that cannot produce JSON, this + option has no effect. + + -p, --pretty + Generate human-readable JSON output. Implies **-j**. + +EXAMPLES +======== +**# bpftool btf dump id 1226** +:: + + [1] PTR '(anon)' type_id=2 + [2] STRUCT 'dummy_tracepoint_args' size=16 vlen=2 + 'pad' type_id=3 bits_offset=0 + 'sock' type_id=4 bits_offset=64 + [3] INT 'long long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none) + [4] PTR '(anon)' type_id=5 + [5] FWD 'sock' fwd_kind=union + +This gives an example of default output for all supported BTF kinds. + +**$ cat prog.c** +:: + + struct fwd_struct; + + enum my_enum { + VAL1 = 3, + VAL2 = 7, + }; + + typedef struct my_struct my_struct_t; + + struct my_struct { + const unsigned int const_int_field; + int bitfield_field: 4; + char arr_field[16]; + const struct fwd_struct *restrict fwd_field; + enum my_enum enum_field; + volatile my_struct_t *typedef_ptr_field; + }; + + union my_union { + int a; + struct my_struct b; + }; + + struct my_struct struct_global_var __attribute__((section("data_sec"))) = { + .bitfield_field = 3, + .enum_field = VAL1, + }; + int global_var __attribute__((section("data_sec"))) = 7; + + __attribute__((noinline)) + int my_func(union my_union *arg1, int arg2) + { + static int static_var __attribute__((section("data_sec"))) = 123; + static_var++; + return static_var; + } + +**$ bpftool btf dump file prog.o** +:: + + [1] PTR '(anon)' type_id=2 + [2] UNION 'my_union' size=48 vlen=2 + 'a' type_id=3 bits_offset=0 + 'b' type_id=4 bits_offset=0 + [3] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED + [4] STRUCT 'my_struct' size=48 vlen=6 + 'const_int_field' type_id=5 bits_offset=0 + 'bitfield_field' type_id=3 bits_offset=32 bitfield_size=4 + 'arr_field' type_id=8 bits_offset=40 + 'fwd_field' type_id=10 bits_offset=192 + 'enum_field' type_id=14 bits_offset=256 + 'typedef_ptr_field' type_id=15 bits_offset=320 + [5] CONST '(anon)' type_id=6 + [6] INT 'unsigned int' size=4 bits_offset=0 nr_bits=32 encoding=(none) + [7] INT 'char' size=1 bits_offset=0 nr_bits=8 encoding=SIGNED + [8] ARRAY '(anon)' type_id=7 index_type_id=9 nr_elems=16 + [9] INT '__ARRAY_SIZE_TYPE__' size=4 bits_offset=0 nr_bits=32 encoding=(none) + [10] RESTRICT '(anon)' type_id=11 + [11] PTR '(anon)' type_id=12 + [12] CONST '(anon)' type_id=13 + [13] FWD 'fwd_struct' fwd_kind=union + [14] ENUM 'my_enum' size=4 vlen=2 + 'VAL1' val=3 + 'VAL2' val=7 + [15] PTR '(anon)' type_id=16 + [16] VOLATILE '(anon)' type_id=17 + [17] TYPEDEF 'my_struct_t' type_id=4 + [18] FUNC_PROTO '(anon)' ret_type_id=3 vlen=2 + 'arg1' type_id=1 + 'arg2' type_id=3 + [19] FUNC 'my_func' type_id=18 + [20] VAR 'struct_global_var' type_id=4, linkage=global-alloc + [21] VAR 'global_var' type_id=3, linkage=global-alloc + [22] VAR 'my_func.static_var' type_id=3, linkage=static + [23] DATASEC 'data_sec' size=0 vlen=3 + type_id=20 offset=0 size=48 + type_id=21 offset=0 size=4 + type_id=22 offset=52 size=4 + +The following commands print BTF types associated with specified map's key, +value, both key and value, and all BTF types, respectively. By default, both +key and value types will be printed. + +**# bpftool btf dump map id 123 key** + +:: + + [39] TYPEDEF 'u32' type_id=37 + +**# bpftool btf dump map id 123 value** + +:: + + [86] PTR '(anon)' type_id=87 + +**# bpftool btf dump map id 123 kv** + +:: + + [39] TYPEDEF 'u32' type_id=37 + [86] PTR '(anon)' type_id=87 + +**# bpftool btf dump map id 123 all** + +:: + + [1] PTR '(anon)' type_id=0 + . + . + . + [2866] ARRAY '(anon)' type_id=52 index_type_id=51 nr_elems=4 + +All the standard ways to specify map or program are supported: + +**# bpftool btf dump map id 123** + +**# bpftool btf dump map pinned /sys/fs/bpf/map_name** + +**# bpftool btf dump prog id 456** + +**# bpftool btf dump prog tag b88e0a09b1d9759d** + +**# bpftool btf dump prog pinned /sys/fs/bpf/prog_name** + +SEE ALSO +======== + **bpf**\ (2), + **bpf-helpers**\ (7), + **bpftool**\ (8), + **bpftool-map**\ (8), + **bpftool-prog**\ (8), + **bpftool-cgroup**\ (8), + **bpftool-feature**\ (8), + **bpftool-net**\ (8), + **bpftool-perf**\ (8) diff --git a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst index 9bb9ace54ba8..ac26876389c2 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst @@ -29,7 +29,7 @@ CGROUP COMMANDS | *PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* } | *ATTACH_TYPE* := { **ingress** | **egress** | **sock_create** | **sock_ops** | **device** | | **bind4** | **bind6** | **post_bind4** | **post_bind6** | **connect4** | **connect6** | -| **sendmsg4** | **sendmsg6** } +| **sendmsg4** | **sendmsg6** | **sysctl** } | *ATTACH_FLAGS* := { **multi** | **override** } DESCRIPTION @@ -85,7 +85,8 @@ DESCRIPTION **sendmsg4** call to sendto(2), sendmsg(2), sendmmsg(2) for an unconnected udp4 socket (since 4.18); **sendmsg6** call to sendto(2), sendmsg(2), sendmmsg(2) for an - unconnected udp6 socket (since 4.18). + unconnected udp6 socket (since 4.18); + **sysctl** sysctl access (since 5.2). **bpftool cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG* Detach *PROG* from the cgroup *CGROUP* and attach type @@ -99,7 +100,7 @@ OPTIONS -h, --help Print short generic help message (similar to **bpftool help**). - -v, --version + -V, --version Print version number (similar to **bpftool version**). -j, --json @@ -144,4 +145,5 @@ SEE ALSO **bpftool-map**\ (8), **bpftool-feature**\ (8), **bpftool-net**\ (8), - **bpftool-perf**\ (8) + **bpftool-perf**\ (8), + **bpftool-btf**\ (8) diff --git a/tools/bpf/bpftool/Documentation/bpftool-feature.rst b/tools/bpf/bpftool/Documentation/bpftool-feature.rst index 82de03dd8f52..14180e887082 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-feature.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-feature.rst @@ -63,7 +63,7 @@ OPTIONS -h, --help Print short generic help message (similar to **bpftool help**). - -v, --version + -V, --version Print version number (similar to **bpftool version**). -j, --json @@ -82,4 +82,5 @@ SEE ALSO **bpftool-map**\ (8), **bpftool-cgroup**\ (8), **bpftool-net**\ (8), - **bpftool-perf**\ (8) + **bpftool-perf**\ (8), + **bpftool-btf**\ (8) diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst index 5c984ffc9f01..13ef27b39f20 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-map.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst @@ -135,7 +135,7 @@ OPTIONS -h, --help Print short generic help message (similar to **bpftool help**). - -v, --version + -V, --version Print version number (similar to **bpftool version**). -j, --json @@ -258,4 +258,5 @@ SEE ALSO **bpftool-cgroup**\ (8), **bpftool-feature**\ (8), **bpftool-net**\ (8), - **bpftool-perf**\ (8) + **bpftool-perf**\ (8), + **bpftool-btf**\ (8) diff --git a/tools/bpf/bpftool/Documentation/bpftool-net.rst b/tools/bpf/bpftool/Documentation/bpftool-net.rst index 779dab3650ee..934580850f42 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-net.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-net.rst @@ -55,7 +55,7 @@ OPTIONS -h, --help Print short generic help message (similar to **bpftool help**). - -v, --version + -V, --version Print version number (similar to **bpftool version**). -j, --json @@ -143,4 +143,5 @@ SEE ALSO **bpftool-map**\ (8), **bpftool-cgroup**\ (8), **bpftool-feature**\ (8), - **bpftool-perf**\ (8) + **bpftool-perf**\ (8), + **bpftool-btf**\ (8) diff --git a/tools/bpf/bpftool/Documentation/bpftool-perf.rst b/tools/bpf/bpftool/Documentation/bpftool-perf.rst index bca5590a80d0..0c7576523a21 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-perf.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-perf.rst @@ -43,7 +43,7 @@ OPTIONS -h, --help Print short generic help message (similar to **bpftool help**). - -v, --version + -V, --version Print version number (similar to **bpftool version**). -j, --json @@ -85,4 +85,5 @@ SEE ALSO **bpftool-map**\ (8), **bpftool-cgroup**\ (8), **bpftool-feature**\ (8), - **bpftool-net**\ (8) + **bpftool-net**\ (8), + **bpftool-btf**\ (8) diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst index 9386bd6e0396..e8118544d118 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst @@ -25,7 +25,7 @@ PROG COMMANDS | **bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual** | **linum**}] | **bpftool** **prog dump jited** *PROG* [{**file** *FILE* | **opcodes** | **linum**}] | **bpftool** **prog pin** *PROG* *FILE* -| **bpftool** **prog { load | loadall }** *OBJ* *PATH* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] +| **bpftool** **prog { load | loadall }** *OBJ* *PATH* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] [**pinmaps** *MAP_DIR*] | **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] | **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] | **bpftool** **prog tracelog** @@ -39,7 +39,8 @@ PROG COMMANDS | **cgroup/sock** | **cgroup/dev** | **lwt_in** | **lwt_out** | **lwt_xmit** | | **lwt_seg6local** | **sockops** | **sk_skb** | **sk_msg** | **lirc_mode2** | | **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | -| **cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** +| **cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** | +| **cgroup/sysctl** | } | *ATTACH_TYPE* := { | **msg_verdict** | **stream_verdict** | **stream_parser** | **flow_dissector** @@ -56,6 +57,14 @@ DESCRIPTION Output will start with program ID followed by program type and zero or more named attributes (depending on kernel version). + Since Linux 5.1 the kernel can collect statistics on BPF + programs (such as the total time spent running the program, + and the number of times it was run). If available, bpftool + shows such statistics. However, the kernel does not collect + them by defaults, as it slightly impacts performance on each + program run. Activation or deactivation of the feature is + performed via the **kernel.bpf_stats_enabled** sysctl knob. + **bpftool prog dump xlated** *PROG* [{ **file** *FILE* | **opcodes** | **visual** | **linum** }] Dump eBPF instructions of the program from the kernel. By default, eBPF will be disassembled and printed to standard @@ -144,7 +153,7 @@ OPTIONS -h, --help Print short generic help message (similar to **bpftool help**). - -v, --version + -V, --version Print version number (similar to **bpftool version**). -j, --json @@ -262,4 +271,5 @@ SEE ALSO **bpftool-cgroup**\ (8), **bpftool-feature**\ (8), **bpftool-net**\ (8), - **bpftool-perf**\ (8) + **bpftool-perf**\ (8), + **bpftool-btf**\ (8) diff --git a/tools/bpf/bpftool/Documentation/bpftool.rst b/tools/bpf/bpftool/Documentation/bpftool.rst index 4f2188845dd8..3e562d7fd56f 100644 --- a/tools/bpf/bpftool/Documentation/bpftool.rst +++ b/tools/bpf/bpftool/Documentation/bpftool.rst @@ -49,7 +49,7 @@ OPTIONS -h, --help Print short help message (similar to **bpftool help**). - -v, --version + -V, --version Print version number (similar to **bpftool version**). -j, --json @@ -76,4 +76,5 @@ SEE ALSO **bpftool-cgroup**\ (8), **bpftool-feature**\ (8), **bpftool-net**\ (8), - **bpftool-perf**\ (8) + **bpftool-perf**\ (8), + **bpftool-btf**\ (8) diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile index 4ad1f0894d53..a7afea4dec47 100644 --- a/tools/bpf/bpftool/Makefile +++ b/tools/bpf/bpftool/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only include ../../scripts/Makefile.include include ../../scripts/utilities.mak diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool index b803827d01e8..50e402a5a9c8 100644 --- a/tools/bpf/bpftool/bash-completion/bpftool +++ b/tools/bpf/bpftool/bash-completion/bpftool @@ -217,6 +217,7 @@ _bpftool() done cur=${words[cword]} prev=${words[cword - 1]} + pprev=${words[cword - 2]} local object=${words[1]} command=${words[2]} @@ -272,17 +273,17 @@ _bpftool() "$cur" ) ) return 0 ;; - *) - _bpftool_once_attr 'file' - if _bpftool_search_list 'xlated'; then - COMPREPLY+=( $( compgen -W 'opcodes visual linum' -- \ - "$cur" ) ) - else - COMPREPLY+=( $( compgen -W 'opcodes linum' -- \ - "$cur" ) ) - fi - return 0 - ;; + *) + _bpftool_once_attr 'file' + if _bpftool_search_list 'xlated'; then + COMPREPLY+=( $( compgen -W 'opcodes visual linum' -- \ + "$cur" ) ) + else + COMPREPLY+=( $( compgen -W 'opcodes linum' -- \ + "$cur" ) ) + fi + return 0 + ;; esac ;; pin) @@ -370,7 +371,8 @@ _bpftool() lirc_mode2 cgroup/bind4 cgroup/bind6 \ cgroup/connect4 cgroup/connect6 \ cgroup/sendmsg4 cgroup/sendmsg6 \ - cgroup/post_bind4 cgroup/post_bind6" -- \ + cgroup/post_bind4 cgroup/post_bind6 \ + cgroup/sysctl" -- \ "$cur" ) ) return 0 ;; @@ -606,6 +608,51 @@ _bpftool() ;; esac ;; + btf) + local PROG_TYPE='id pinned tag' + local MAP_TYPE='id pinned' + case $command in + dump) + case $prev in + $command) + COMPREPLY+=( $( compgen -W "id map prog file" -- \ + "$cur" ) ) + return 0 + ;; + prog) + COMPREPLY=( $( compgen -W "$PROG_TYPE" -- "$cur" ) ) + return 0 + ;; + map) + COMPREPLY=( $( compgen -W "$MAP_TYPE" -- "$cur" ) ) + return 0 + ;; + id) + case $pprev in + prog) + _bpftool_get_prog_ids + ;; + map) + _bpftool_get_map_ids + ;; + esac + return 0 + ;; + *) + if [[ $cword == 6 ]] && [[ ${words[3]} == "map" ]]; then + COMPREPLY+=( $( compgen -W 'key value kv all' -- \ + "$cur" ) ) + fi + return 0 + ;; + esac + ;; + *) + [[ $prev == $object ]] && \ + COMPREPLY=( $( compgen -W 'dump help' -- "$cur" ) ) + ;; + esac + ;; cgroup) case $command in show|list) @@ -619,7 +666,7 @@ _bpftool() attach|detach) local ATTACH_TYPES='ingress egress sock_create sock_ops \ device bind4 bind6 post_bind4 post_bind6 connect4 \ - connect6 sendmsg4 sendmsg6' + connect6 sendmsg4 sendmsg6 sysctl' local ATTACH_FLAGS='multi override' local PROG_TYPE='id pinned tag' case $prev in @@ -629,7 +676,7 @@ _bpftool() ;; ingress|egress|sock_create|sock_ops|device|bind4|bind6|\ post_bind4|post_bind6|connect4|connect6|sendmsg4|\ - sendmsg6) + sendmsg6|sysctl) COMPREPLY=( $( compgen -W "$PROG_TYPE" -- \ "$cur" ) ) return 0 diff --git a/tools/bpf/bpftool/btf.c b/tools/bpf/bpftool/btf.c new file mode 100644 index 000000000000..7317438ecd9e --- /dev/null +++ b/tools/bpf/bpftool/btf.c @@ -0,0 +1,586 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* Copyright (C) 2019 Facebook */ + +#include <errno.h> +#include <fcntl.h> +#include <linux/err.h> +#include <stdbool.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> +#include <gelf.h> +#include <bpf.h> +#include <linux/btf.h> + +#include "btf.h" +#include "json_writer.h" +#include "main.h" + +static const char * const btf_kind_str[NR_BTF_KINDS] = { + [BTF_KIND_UNKN] = "UNKNOWN", + [BTF_KIND_INT] = "INT", + [BTF_KIND_PTR] = "PTR", + [BTF_KIND_ARRAY] = "ARRAY", + [BTF_KIND_STRUCT] = "STRUCT", + [BTF_KIND_UNION] = "UNION", + [BTF_KIND_ENUM] = "ENUM", + [BTF_KIND_FWD] = "FWD", + [BTF_KIND_TYPEDEF] = "TYPEDEF", + [BTF_KIND_VOLATILE] = "VOLATILE", + [BTF_KIND_CONST] = "CONST", + [BTF_KIND_RESTRICT] = "RESTRICT", + [BTF_KIND_FUNC] = "FUNC", + [BTF_KIND_FUNC_PROTO] = "FUNC_PROTO", + [BTF_KIND_VAR] = "VAR", + [BTF_KIND_DATASEC] = "DATASEC", +}; + +static const char *btf_int_enc_str(__u8 encoding) +{ + switch (encoding) { + case 0: + return "(none)"; + case BTF_INT_SIGNED: + return "SIGNED"; + case BTF_INT_CHAR: + return "CHAR"; + case BTF_INT_BOOL: + return "BOOL"; + default: + return "UNKN"; + } +} + +static const char *btf_var_linkage_str(__u32 linkage) +{ + switch (linkage) { + case BTF_VAR_STATIC: + return "static"; + case BTF_VAR_GLOBAL_ALLOCATED: + return "global-alloc"; + default: + return "(unknown)"; + } +} + +static const char *btf_str(const struct btf *btf, __u32 off) +{ + if (!off) + return "(anon)"; + return btf__name_by_offset(btf, off) ? : "(invalid)"; +} + +static int dump_btf_type(const struct btf *btf, __u32 id, + const struct btf_type *t) +{ + json_writer_t *w = json_wtr; + int kind, safe_kind; + + kind = BTF_INFO_KIND(t->info); + safe_kind = kind <= BTF_KIND_MAX ? kind : BTF_KIND_UNKN; + + if (json_output) { + jsonw_start_object(w); + jsonw_uint_field(w, "id", id); + jsonw_string_field(w, "kind", btf_kind_str[safe_kind]); + jsonw_string_field(w, "name", btf_str(btf, t->name_off)); + } else { + printf("[%u] %s '%s'", id, btf_kind_str[safe_kind], + btf_str(btf, t->name_off)); + } + + switch (BTF_INFO_KIND(t->info)) { + case BTF_KIND_INT: { + __u32 v = *(__u32 *)(t + 1); + const char *enc; + + enc = btf_int_enc_str(BTF_INT_ENCODING(v)); + + if (json_output) { + jsonw_uint_field(w, "size", t->size); + jsonw_uint_field(w, "bits_offset", BTF_INT_OFFSET(v)); + jsonw_uint_field(w, "nr_bits", BTF_INT_BITS(v)); + jsonw_string_field(w, "encoding", enc); + } else { + printf(" size=%u bits_offset=%u nr_bits=%u encoding=%s", + t->size, BTF_INT_OFFSET(v), BTF_INT_BITS(v), + enc); + } + break; + } + case BTF_KIND_PTR: + case BTF_KIND_CONST: + case BTF_KIND_VOLATILE: + case BTF_KIND_RESTRICT: + case BTF_KIND_TYPEDEF: + if (json_output) + jsonw_uint_field(w, "type_id", t->type); + else + printf(" type_id=%u", t->type); + break; + case BTF_KIND_ARRAY: { + const struct btf_array *arr = (const void *)(t + 1); + + if (json_output) { + jsonw_uint_field(w, "type_id", arr->type); + jsonw_uint_field(w, "index_type_id", arr->index_type); + jsonw_uint_field(w, "nr_elems", arr->nelems); + } else { + printf(" type_id=%u index_type_id=%u nr_elems=%u", + arr->type, arr->index_type, arr->nelems); + } + break; + } + case BTF_KIND_STRUCT: + case BTF_KIND_UNION: { + const struct btf_member *m = (const void *)(t + 1); + __u16 vlen = BTF_INFO_VLEN(t->info); + int i; + + if (json_output) { + jsonw_uint_field(w, "size", t->size); + jsonw_uint_field(w, "vlen", vlen); + jsonw_name(w, "members"); + jsonw_start_array(w); + } else { + printf(" size=%u vlen=%u", t->size, vlen); + } + for (i = 0; i < vlen; i++, m++) { + const char *name = btf_str(btf, m->name_off); + __u32 bit_off, bit_sz; + + if (BTF_INFO_KFLAG(t->info)) { + bit_off = BTF_MEMBER_BIT_OFFSET(m->offset); + bit_sz = BTF_MEMBER_BITFIELD_SIZE(m->offset); + } else { + bit_off = m->offset; + bit_sz = 0; + } + + if (json_output) { + jsonw_start_object(w); + jsonw_string_field(w, "name", name); + jsonw_uint_field(w, "type_id", m->type); + jsonw_uint_field(w, "bits_offset", bit_off); + if (bit_sz) { + jsonw_uint_field(w, "bitfield_size", + bit_sz); + } + jsonw_end_object(w); + } else { + printf("\n\t'%s' type_id=%u bits_offset=%u", + name, m->type, bit_off); + if (bit_sz) + printf(" bitfield_size=%u", bit_sz); + } + } + if (json_output) + jsonw_end_array(w); + break; + } + case BTF_KIND_ENUM: { + const struct btf_enum *v = (const void *)(t + 1); + __u16 vlen = BTF_INFO_VLEN(t->info); + int i; + + if (json_output) { + jsonw_uint_field(w, "size", t->size); + jsonw_uint_field(w, "vlen", vlen); + jsonw_name(w, "values"); + jsonw_start_array(w); + } else { + printf(" size=%u vlen=%u", t->size, vlen); + } + for (i = 0; i < vlen; i++, v++) { + const char *name = btf_str(btf, v->name_off); + + if (json_output) { + jsonw_start_object(w); + jsonw_string_field(w, "name", name); + jsonw_uint_field(w, "val", v->val); + jsonw_end_object(w); + } else { + printf("\n\t'%s' val=%u", name, v->val); + } + } + if (json_output) + jsonw_end_array(w); + break; + } + case BTF_KIND_FWD: { + const char *fwd_kind = BTF_INFO_KFLAG(t->info) ? "union" + : "struct"; + + if (json_output) + jsonw_string_field(w, "fwd_kind", fwd_kind); + else + printf(" fwd_kind=%s", fwd_kind); + break; + } + case BTF_KIND_FUNC: + if (json_output) + jsonw_uint_field(w, "type_id", t->type); + else + printf(" type_id=%u", t->type); + break; + case BTF_KIND_FUNC_PROTO: { + const struct btf_param *p = (const void *)(t + 1); + __u16 vlen = BTF_INFO_VLEN(t->info); + int i; + + if (json_output) { + jsonw_uint_field(w, "ret_type_id", t->type); + jsonw_uint_field(w, "vlen", vlen); + jsonw_name(w, "params"); + jsonw_start_array(w); + } else { + printf(" ret_type_id=%u vlen=%u", t->type, vlen); + } + for (i = 0; i < vlen; i++, p++) { + const char *name = btf_str(btf, p->name_off); + + if (json_output) { + jsonw_start_object(w); + jsonw_string_field(w, "name", name); + jsonw_uint_field(w, "type_id", p->type); + jsonw_end_object(w); + } else { + printf("\n\t'%s' type_id=%u", name, p->type); + } + } + if (json_output) + jsonw_end_array(w); + break; + } + case BTF_KIND_VAR: { + const struct btf_var *v = (const void *)(t + 1); + const char *linkage; + + linkage = btf_var_linkage_str(v->linkage); + + if (json_output) { + jsonw_uint_field(w, "type_id", t->type); + jsonw_string_field(w, "linkage", linkage); + } else { + printf(" type_id=%u, linkage=%s", t->type, linkage); + } + break; + } + case BTF_KIND_DATASEC: { + const struct btf_var_secinfo *v = (const void *)(t+1); + __u16 vlen = BTF_INFO_VLEN(t->info); + int i; + + if (json_output) { + jsonw_uint_field(w, "size", t->size); + jsonw_uint_field(w, "vlen", vlen); + jsonw_name(w, "vars"); + jsonw_start_array(w); + } else { + printf(" size=%u vlen=%u", t->size, vlen); + } + for (i = 0; i < vlen; i++, v++) { + if (json_output) { + jsonw_start_object(w); + jsonw_uint_field(w, "type_id", v->type); + jsonw_uint_field(w, "offset", v->offset); + jsonw_uint_field(w, "size", v->size); + jsonw_end_object(w); + } else { + printf("\n\ttype_id=%u offset=%u size=%u", + v->type, v->offset, v->size); + } + } + if (json_output) + jsonw_end_array(w); + break; + } + default: + break; + } + + if (json_output) + jsonw_end_object(json_wtr); + else + printf("\n"); + + return 0; +} + +static int dump_btf_raw(const struct btf *btf, + __u32 *root_type_ids, int root_type_cnt) +{ + const struct btf_type *t; + int i; + + if (json_output) { + jsonw_start_object(json_wtr); + jsonw_name(json_wtr, "types"); + jsonw_start_array(json_wtr); + } + + if (root_type_cnt) { + for (i = 0; i < root_type_cnt; i++) { + t = btf__type_by_id(btf, root_type_ids[i]); + dump_btf_type(btf, root_type_ids[i], t); + } + } else { + int cnt = btf__get_nr_types(btf); + + for (i = 1; i <= cnt; i++) { + t = btf__type_by_id(btf, i); + dump_btf_type(btf, i, t); + } + } + + if (json_output) { + jsonw_end_array(json_wtr); + jsonw_end_object(json_wtr); + } + return 0; +} + +static bool check_btf_endianness(GElf_Ehdr *ehdr) +{ + static unsigned int const endian = 1; + + switch (ehdr->e_ident[EI_DATA]) { + case ELFDATA2LSB: + return *(unsigned char const *)&endian == 1; + case ELFDATA2MSB: + return *(unsigned char const *)&endian == 0; + default: + return 0; + } +} + +static int btf_load_from_elf(const char *path, struct btf **btf) +{ + int err = -1, fd = -1, idx = 0; + Elf_Data *btf_data = NULL; + Elf_Scn *scn = NULL; + Elf *elf = NULL; + GElf_Ehdr ehdr; + + if (elf_version(EV_CURRENT) == EV_NONE) { + p_err("failed to init libelf for %s", path); + return -1; + } + + fd = open(path, O_RDONLY); + if (fd < 0) { + p_err("failed to open %s: %s", path, strerror(errno)); + return -1; + } + + elf = elf_begin(fd, ELF_C_READ, NULL); + if (!elf) { + p_err("failed to open %s as ELF file", path); + goto done; + } + if (!gelf_getehdr(elf, &ehdr)) { + p_err("failed to get EHDR from %s", path); + goto done; + } + if (!check_btf_endianness(&ehdr)) { + p_err("non-native ELF endianness is not supported"); + goto done; + } + if (!elf_rawdata(elf_getscn(elf, ehdr.e_shstrndx), NULL)) { + p_err("failed to get e_shstrndx from %s\n", path); + goto done; + } + + while ((scn = elf_nextscn(elf, scn)) != NULL) { + GElf_Shdr sh; + char *name; + + idx++; + if (gelf_getshdr(scn, &sh) != &sh) { + p_err("failed to get section(%d) header from %s", + idx, path); + goto done; + } + name = elf_strptr(elf, ehdr.e_shstrndx, sh.sh_name); + if (!name) { + p_err("failed to get section(%d) name from %s", + idx, path); + goto done; + } + if (strcmp(name, BTF_ELF_SEC) == 0) { + btf_data = elf_getdata(scn, 0); + if (!btf_data) { + p_err("failed to get section(%d, %s) data from %s", + idx, name, path); + goto done; + } + break; + } + } + + if (!btf_data) { + p_err("%s ELF section not found in %s", BTF_ELF_SEC, path); + goto done; + } + + *btf = btf__new(btf_data->d_buf, btf_data->d_size); + if (IS_ERR(*btf)) { + err = PTR_ERR(*btf); + *btf = NULL; + p_err("failed to load BTF data from %s: %s", + path, strerror(err)); + goto done; + } + + err = 0; +done: + if (err) { + if (*btf) { + btf__free(*btf); + *btf = NULL; + } + } + if (elf) + elf_end(elf); + close(fd); + return err; +} + +static int do_dump(int argc, char **argv) +{ + struct btf *btf = NULL; + __u32 root_type_ids[2]; + int root_type_cnt = 0; + __u32 btf_id = -1; + const char *src; + int fd = -1; + int err; + + if (!REQ_ARGS(2)) { + usage(); + return -1; + } + src = GET_ARG(); + + if (is_prefix(src, "map")) { + struct bpf_map_info info = {}; + __u32 len = sizeof(info); + + if (!REQ_ARGS(2)) { + usage(); + return -1; + } + + fd = map_parse_fd_and_info(&argc, &argv, &info, &len); + if (fd < 0) + return -1; + + btf_id = info.btf_id; + if (argc && is_prefix(*argv, "key")) { + root_type_ids[root_type_cnt++] = info.btf_key_type_id; + NEXT_ARG(); + } else if (argc && is_prefix(*argv, "value")) { + root_type_ids[root_type_cnt++] = info.btf_value_type_id; + NEXT_ARG(); + } else if (argc && is_prefix(*argv, "all")) { + NEXT_ARG(); + } else if (argc && is_prefix(*argv, "kv")) { + root_type_ids[root_type_cnt++] = info.btf_key_type_id; + root_type_ids[root_type_cnt++] = info.btf_value_type_id; + NEXT_ARG(); + } else { + root_type_ids[root_type_cnt++] = info.btf_key_type_id; + root_type_ids[root_type_cnt++] = info.btf_value_type_id; + } + } else if (is_prefix(src, "prog")) { + struct bpf_prog_info info = {}; + __u32 len = sizeof(info); + + if (!REQ_ARGS(2)) { + usage(); + return -1; + } + + fd = prog_parse_fd(&argc, &argv); + if (fd < 0) + return -1; + + err = bpf_obj_get_info_by_fd(fd, &info, &len); + if (err) { + p_err("can't get prog info: %s", strerror(errno)); + goto done; + } + + btf_id = info.btf_id; + } else if (is_prefix(src, "id")) { + char *endptr; + + btf_id = strtoul(*argv, &endptr, 0); + if (*endptr) { + p_err("can't parse %s as ID", **argv); + return -1; + } + NEXT_ARG(); + } else if (is_prefix(src, "file")) { + err = btf_load_from_elf(*argv, &btf); + if (err) + goto done; + NEXT_ARG(); + } else { + err = -1; + p_err("unrecognized BTF source specifier: '%s'", src); + goto done; + } + + if (!btf) { + err = btf__get_from_id(btf_id, &btf); + if (err) { + p_err("get btf by id (%u): %s", btf_id, strerror(err)); + goto done; + } + if (!btf) { + err = ENOENT; + p_err("can't find btf with ID (%u)", btf_id); + goto done; + } + } + + dump_btf_raw(btf, root_type_ids, root_type_cnt); + +done: + close(fd); + btf__free(btf); + return err; +} + +static int do_help(int argc, char **argv) +{ + if (json_output) { + jsonw_null(json_wtr); + return 0; + } + + fprintf(stderr, + "Usage: %s btf dump BTF_SRC\n" + " %s btf help\n" + "\n" + " BTF_SRC := { id BTF_ID | prog PROG | map MAP [{key | value | kv | all}] | file FILE }\n" + " " HELP_SPEC_MAP "\n" + " " HELP_SPEC_PROGRAM "\n" + " " HELP_SPEC_OPTIONS "\n" + "", + bin_name, bin_name); + + return 0; +} + +static const struct cmd cmds[] = { + { "help", do_help }, + { "dump", do_dump }, + { 0 } +}; + +int do_btf(int argc, char **argv) +{ + return cmd_select(cmds, argc, argv, do_help); +} diff --git a/tools/bpf/bpftool/btf_dumper.c b/tools/bpf/bpftool/btf_dumper.c index e63bce0755eb..8cafb9b31467 100644 --- a/tools/bpf/bpftool/btf_dumper.c +++ b/tools/bpf/bpftool/btf_dumper.c @@ -309,6 +309,48 @@ static int btf_dumper_struct(const struct btf_dumper *d, __u32 type_id, return ret; } +static int btf_dumper_var(const struct btf_dumper *d, __u32 type_id, + __u8 bit_offset, const void *data) +{ + const struct btf_type *t = btf__type_by_id(d->btf, type_id); + int ret; + + jsonw_start_object(d->jw); + jsonw_name(d->jw, btf__name_by_offset(d->btf, t->name_off)); + ret = btf_dumper_do_type(d, t->type, bit_offset, data); + jsonw_end_object(d->jw); + + return ret; +} + +static int btf_dumper_datasec(const struct btf_dumper *d, __u32 type_id, + const void *data) +{ + struct btf_var_secinfo *vsi; + const struct btf_type *t; + int ret = 0, i, vlen; + + t = btf__type_by_id(d->btf, type_id); + if (!t) + return -EINVAL; + + vlen = BTF_INFO_VLEN(t->info); + vsi = (struct btf_var_secinfo *)(t + 1); + + jsonw_start_object(d->jw); + jsonw_name(d->jw, btf__name_by_offset(d->btf, t->name_off)); + jsonw_start_array(d->jw); + for (i = 0; i < vlen; i++) { + ret = btf_dumper_do_type(d, vsi[i].type, 0, data + vsi[i].offset); + if (ret) + break; + } + jsonw_end_array(d->jw); + jsonw_end_object(d->jw); + + return ret; +} + static int btf_dumper_do_type(const struct btf_dumper *d, __u32 type_id, __u8 bit_offset, const void *data) { @@ -341,6 +383,10 @@ static int btf_dumper_do_type(const struct btf_dumper *d, __u32 type_id, case BTF_KIND_CONST: case BTF_KIND_RESTRICT: return btf_dumper_modifier(d, type_id, bit_offset, data); + case BTF_KIND_VAR: + return btf_dumper_var(d, type_id, bit_offset, data); + case BTF_KIND_DATASEC: + return btf_dumper_datasec(d, type_id, data); default: jsonw_printf(d->jw, "(unsupported-kind"); return -EINVAL; @@ -377,6 +423,7 @@ static int __btf_dumper_type_only(const struct btf *btf, __u32 type_id, { const struct btf_type *proto_type; const struct btf_array *array; + const struct btf_var *var; const struct btf_type *t; if (!type_id) { @@ -440,6 +487,18 @@ static int __btf_dumper_type_only(const struct btf *btf, __u32 type_id, if (pos == -1) return -1; break; + case BTF_KIND_VAR: + var = (struct btf_var *)(t + 1); + if (var->linkage == BTF_VAR_STATIC) + BTF_PRINT_ARG("static "); + BTF_PRINT_TYPE(t->type); + BTF_PRINT_ARG(" %s", + btf__name_by_offset(btf, t->name_off)); + break; + case BTF_KIND_DATASEC: + BTF_PRINT_ARG("section (\"%s\") ", + btf__name_by_offset(btf, t->name_off)); + break; case BTF_KIND_UNKN: default: return -1; diff --git a/tools/bpf/bpftool/cgroup.c b/tools/bpf/bpftool/cgroup.c index 4b5c8da2a7c0..7e22f115c8c1 100644 --- a/tools/bpf/bpftool/cgroup.c +++ b/tools/bpf/bpftool/cgroup.c @@ -25,7 +25,7 @@ " ATTACH_TYPE := { ingress | egress | sock_create |\n" \ " sock_ops | device | bind4 | bind6 |\n" \ " post_bind4 | post_bind6 | connect4 |\n" \ - " connect6 | sendmsg4 | sendmsg6 }" + " connect6 | sendmsg4 | sendmsg6 | sysctl }" static const char * const attach_type_strings[] = { [BPF_CGROUP_INET_INGRESS] = "ingress", @@ -41,6 +41,7 @@ static const char * const attach_type_strings[] = { [BPF_CGROUP_INET6_POST_BIND] = "post_bind6", [BPF_CGROUP_UDP4_SENDMSG] = "sendmsg4", [BPF_CGROUP_UDP6_SENDMSG] = "sendmsg6", + [BPF_CGROUP_SYSCTL] = "sysctl", [__MAX_BPF_ATTACH_TYPE] = NULL, }; @@ -248,6 +249,13 @@ static int do_show_tree_fn(const char *fpath, const struct stat *sb, for (type = 0; type < __MAX_BPF_ATTACH_TYPE; type++) show_attached_bpf_progs(cgroup_fd, type, ftw->level); + if (errno == EINVAL) + /* Last attach type does not support query. + * Do not report an error for this, especially because batch + * mode would stop processing commands. + */ + errno = 0; + if (json_output) { jsonw_end_array(json_wtr); jsonw_end_object(json_wtr); diff --git a/tools/bpf/bpftool/main.c b/tools/bpf/bpftool/main.c index a9d5e9e6a732..1ac1fc520e6a 100644 --- a/tools/bpf/bpftool/main.c +++ b/tools/bpf/bpftool/main.c @@ -56,7 +56,7 @@ static int do_help(int argc, char **argv) " %s batch file FILE\n" " %s version\n" "\n" - " OBJECT := { prog | map | cgroup | perf | net | feature }\n" + " OBJECT := { prog | map | cgroup | perf | net | feature | btf }\n" " " HELP_SPEC_OPTIONS "\n" "", bin_name, bin_name, bin_name); @@ -188,6 +188,7 @@ static const struct cmd cmds[] = { { "perf", do_perf }, { "net", do_net }, { "feature", do_feature }, + { "btf", do_btf }, { "version", do_version }, { 0 } }; diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h index d7dd84d3c660..3d63feb7f852 100644 --- a/tools/bpf/bpftool/main.h +++ b/tools/bpf/bpftool/main.h @@ -73,6 +73,7 @@ static const char * const prog_type_name[] = { [BPF_PROG_TYPE_LIRC_MODE2] = "lirc_mode2", [BPF_PROG_TYPE_SK_REUSEPORT] = "sk_reuseport", [BPF_PROG_TYPE_FLOW_DISSECTOR] = "flow_dissector", + [BPF_PROG_TYPE_CGROUP_SYSCTL] = "cgroup_sysctl", }; extern const char * const map_type_name[]; @@ -149,6 +150,7 @@ int do_perf(int argc, char **arg); int do_net(int argc, char **arg); int do_tracelog(int argc, char **arg); int do_feature(int argc, char **argv); +int do_btf(int argc, char **argv); int parse_u32_arg(int *argc, char ***argv, __u32 *val, const char *what); int prog_parse_fd(int *argc, char ***argv); diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c index e0c650d91784..3ec82904ccec 100644 --- a/tools/bpf/bpftool/map.c +++ b/tools/bpf/bpftool/map.c @@ -46,6 +46,7 @@ const char * const map_type_name[] = { [BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE] = "percpu_cgroup_storage", [BPF_MAP_TYPE_QUEUE] = "queue", [BPF_MAP_TYPE_STACK] = "stack", + [BPF_MAP_TYPE_SK_STORAGE] = "sk_storage", }; const size_t map_type_name_size = ARRAY_SIZE(map_type_name); @@ -153,11 +154,13 @@ static int do_dump_btf(const struct btf_dumper *d, /* start of key-value pair */ jsonw_start_object(d->jw); - jsonw_name(d->jw, "key"); + if (map_info->btf_key_type_id) { + jsonw_name(d->jw, "key"); - ret = btf_dumper_type(d, map_info->btf_key_type_id, key); - if (ret) - goto err_end_obj; + ret = btf_dumper_type(d, map_info->btf_key_type_id, key); + if (ret) + goto err_end_obj; + } if (!map_is_per_cpu(map_info->type)) { jsonw_name(d->jw, "value"); @@ -259,20 +262,20 @@ static void print_entry_json(struct bpf_map_info *info, unsigned char *key, } static void print_entry_error(struct bpf_map_info *info, unsigned char *key, - const char *value) + const char *error_msg) { - int value_size = strlen(value); + int msg_size = strlen(error_msg); bool single_line, break_names; - break_names = info->key_size > 16 || value_size > 16; - single_line = info->key_size + value_size <= 24 && !break_names; + break_names = info->key_size > 16 || msg_size > 16; + single_line = info->key_size + msg_size <= 24 && !break_names; printf("key:%c", break_names ? '\n' : ' '); fprint_hex(stdout, key, info->key_size, " "); printf(single_line ? " " : "\n"); - printf("value:%c%s", break_names ? '\n' : ' ', value); + printf("value:%c%s", break_names ? '\n' : ' ', error_msg); printf("\n"); } @@ -296,11 +299,7 @@ static void print_entry_plain(struct bpf_map_info *info, unsigned char *key, if (info->value_size) { printf("value:%c", break_names ? '\n' : ' '); - if (value) - fprint_hex(stdout, value, info->value_size, - " "); - else - printf("<no entry>"); + fprint_hex(stdout, value, info->value_size, " "); } printf("\n"); @@ -319,11 +318,8 @@ static void print_entry_plain(struct bpf_map_info *info, unsigned char *key, for (i = 0; i < n; i++) { printf("value (CPU %02d):%c", i, info->value_size > 16 ? '\n' : ' '); - if (value) - fprint_hex(stdout, value + i * step, - info->value_size, " "); - else - printf("<no entry>"); + fprint_hex(stdout, value + i * step, + info->value_size, " "); printf("\n"); } } @@ -536,6 +532,9 @@ static int show_map_close_json(int fd, struct bpf_map_info *info) } close(fd); + if (info->btf_id) + jsonw_int_field(json_wtr, "btf_id", info->btf_id); + if (!hash_empty(map_table.table)) { struct pinned_obj *obj; @@ -602,15 +601,19 @@ static int show_map_close_plain(int fd, struct bpf_map_info *info) } close(fd); - printf("\n"); if (!hash_empty(map_table.table)) { struct pinned_obj *obj; hash_for_each_possible(map_table.table, obj, hash, info->id) { if (obj->id == info->id) - printf("\tpinned %s\n", obj->path); + printf("\n\tpinned %s", obj->path); } } + + if (info->btf_id) + printf("\n\tbtf_id %d", info->btf_id); + + printf("\n"); return 0; } @@ -720,11 +723,16 @@ static int dump_map_elem(int fd, void *key, void *value, jsonw_string_field(json_wtr, "error", strerror(lookup_errno)); jsonw_end_object(json_wtr); } else { - if (errno == ENOENT) - print_entry_plain(map_info, key, NULL); - else - print_entry_error(map_info, key, - strerror(lookup_errno)); + const char *msg = NULL; + + if (lookup_errno == ENOENT) + msg = "<no entry>"; + else if (lookup_errno == ENOSPC && + map_info->type == BPF_MAP_TYPE_REUSEPORT_SOCKARRAY) + msg = "<cannot read>"; + + print_entry_error(map_info, key, + msg ? : strerror(lookup_errno)); } return 0; @@ -778,6 +786,10 @@ static int do_dump(int argc, char **argv) } } + if (info.type == BPF_MAP_TYPE_REUSEPORT_SOCKARRAY && + info.value_size != 8) + p_info("Warning: cannot read values from %s map with value_size != 8", + map_type_name[info.type]); while (true) { err = bpf_map_get_next_key(fd, prev_key, key); if (err) { @@ -1151,6 +1163,9 @@ static int do_create(int argc, char **argv) return -1; } NEXT_ARG(); + } else { + p_err("unknown arg %s", *argv); + return -1; } } diff --git a/tools/bpf/bpftool/net.c b/tools/bpf/bpftool/net.c index db0e7de49d49..67e99c56bc88 100644 --- a/tools/bpf/bpftool/net.c +++ b/tools/bpf/bpftool/net.c @@ -3,6 +3,7 @@ #define _GNU_SOURCE #include <errno.h> +#include <fcntl.h> #include <stdlib.h> #include <string.h> #include <unistd.h> @@ -12,6 +13,8 @@ #include <linux/rtnetlink.h> #include <linux/tc_act/tc_bpf.h> #include <sys/socket.h> +#include <sys/stat.h> +#include <sys/types.h> #include <bpf.h> #include <nlattr.h> @@ -48,6 +51,10 @@ struct bpf_filter_t { int ifindex; }; +struct bpf_attach_info { + __u32 flow_dissector_id; +}; + static int dump_link_nlmsg(void *cookie, void *msg, struct nlattr **tb) { struct bpf_netdev_t *netinfo = cookie; @@ -180,8 +187,45 @@ out: return 0; } +static int query_flow_dissector(struct bpf_attach_info *attach_info) +{ + __u32 attach_flags; + __u32 prog_ids[1]; + __u32 prog_cnt; + int err; + int fd; + + fd = open("/proc/self/ns/net", O_RDONLY); + if (fd < 0) { + p_err("can't open /proc/self/ns/net: %d", + strerror(errno)); + return -1; + } + prog_cnt = ARRAY_SIZE(prog_ids); + err = bpf_prog_query(fd, BPF_FLOW_DISSECTOR, 0, + &attach_flags, prog_ids, &prog_cnt); + close(fd); + if (err) { + if (errno == EINVAL) { + /* Older kernel's don't support querying + * flow dissector programs. + */ + errno = 0; + return 0; + } + p_err("can't query prog: %s", strerror(errno)); + return -1; + } + + if (prog_cnt == 1) + attach_info->flow_dissector_id = prog_ids[0]; + + return 0; +} + static int do_show(int argc, char **argv) { + struct bpf_attach_info attach_info = {}; int i, sock, ret, filter_idx = -1; struct bpf_netdev_t dev_array; unsigned int nl_pid; @@ -199,6 +243,10 @@ static int do_show(int argc, char **argv) usage(); } + ret = query_flow_dissector(&attach_info); + if (ret) + return -1; + sock = libbpf_netlink_open(&nl_pid); if (sock < 0) { fprintf(stderr, "failed to open netlink sock\n"); @@ -227,6 +275,12 @@ static int do_show(int argc, char **argv) } NET_END_ARRAY("\n"); } + + NET_START_ARRAY("flow_dissector", "%s:\n"); + if (attach_info.flow_dissector_id > 0) + NET_DUMP_UINT("id", "id %u", attach_info.flow_dissector_id); + NET_END_ARRAY("\n"); + NET_END_OBJECT; if (json_output) jsonw_end_array(json_wtr); diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index d2be5a06c339..26336bad0442 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -249,6 +249,9 @@ static void print_prog_json(struct bpf_prog_info *info, int fd) if (info->nr_map_ids) show_prog_maps(fd, info->nr_map_ids); + if (info->btf_id) + jsonw_int_field(json_wtr, "btf_id", info->btf_id); + if (!hash_empty(prog_table.table)) { struct pinned_obj *obj; @@ -319,6 +322,9 @@ static void print_prog_plain(struct bpf_prog_info *info, int fd) } } + if (info->btf_id) + printf("\n\tbtf_id %d", info->btf_id); + printf("\n"); } @@ -873,6 +879,8 @@ static int load_with_options(int argc, char **argv, bool first_prog_only) } } + set_max_rlimit(); + obj = __bpf_object__open_xattr(&attr, bpf_flags); if (IS_ERR_OR_NULL(obj)) { p_err("failed to open object file"); @@ -952,8 +960,6 @@ static int load_with_options(int argc, char **argv, bool first_prog_only) goto err_close_obj; } - set_max_rlimit(); - err = bpf_object__load(obj); if (err) { p_err("failed to load object file"); @@ -1054,7 +1060,7 @@ static int do_help(int argc, char **argv) " tracepoint | raw_tracepoint | xdp | perf_event | cgroup/skb |\n" " cgroup/sock | cgroup/dev | lwt_in | lwt_out | lwt_xmit |\n" " lwt_seg6local | sockops | sk_skb | sk_msg | lirc_mode2 |\n" - " sk_reuseport | flow_dissector |\n" + " sk_reuseport | flow_dissector | cgroup/sysctl |\n" " cgroup/bind4 | cgroup/bind6 | cgroup/post_bind4 |\n" " cgroup/post_bind6 | cgroup/connect4 | cgroup/connect6 |\n" " cgroup/sendmsg4 | cgroup/sendmsg6 }\n" diff --git a/tools/bpf/bpftool/xlated_dumper.c b/tools/bpf/bpftool/xlated_dumper.c index 7073dbe1ff27..0bb17bf88b18 100644 --- a/tools/bpf/bpftool/xlated_dumper.c +++ b/tools/bpf/bpftool/xlated_dumper.c @@ -195,6 +195,9 @@ static const char *print_imm(void *private_data, if (insn->src_reg == BPF_PSEUDO_MAP_FD) snprintf(dd->scratch_buff, sizeof(dd->scratch_buff), "map[id:%u]", insn->imm); + else if (insn->src_reg == BPF_PSEUDO_MAP_VALUE) + snprintf(dd->scratch_buff, sizeof(dd->scratch_buff), + "map[id:%u][0]+%u", insn->imm, (insn + 1)->imm); else snprintf(dd->scratch_buff, sizeof(dd->scratch_buff), "0x%llx", (unsigned long long)full_imm); diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature index 8d3864b061f3..3b24231c58a2 100644 --- a/tools/build/Makefile.feature +++ b/tools/build/Makefile.feature @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only feature_dir := $(srctree)/tools/build/feature ifneq ($(OUTPUT),) @@ -67,6 +68,7 @@ FEATURE_TESTS_BASIC := \ sdt \ setns \ libaio \ + libzstd \ disassembler-four-args # FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list @@ -120,6 +122,7 @@ FEATURE_DISPLAY ?= \ get_cpuid \ bpf \ libaio \ + libzstd \ disassembler-four-args # Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features. diff --git a/tools/build/Makefile.include b/tools/build/Makefile.include index d360f39a445b..8dadaa0fbb43 100644 --- a/tools/build/Makefile.include +++ b/tools/build/Makefile.include @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only build := -f $(srctree)/tools/build/Makefile.build dir=. obj fixdep: diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile index 7ceb4441b627..4b8244ee65ce 100644 --- a/tools/build/feature/Makefile +++ b/tools/build/feature/Makefile @@ -62,7 +62,8 @@ FILES= \ test-clang.bin \ test-llvm.bin \ test-llvm-version.bin \ - test-libaio.bin + test-libaio.bin \ + test-libzstd.bin FILES := $(addprefix $(OUTPUT),$(FILES)) @@ -301,6 +302,9 @@ $(OUTPUT)test-clang.bin: $(OUTPUT)test-libaio.bin: $(BUILD) -lrt +$(OUTPUT)test-libzstd.bin: + $(BUILD) -lzstd + ############################### clean: diff --git a/tools/build/feature/test-all.c b/tools/build/feature/test-all.c index 7853e6d91090..a59c53705093 100644 --- a/tools/build/feature/test-all.c +++ b/tools/build/feature/test-all.c @@ -182,6 +182,10 @@ # include "test-disassembler-four-args.c" #undef main +#define main main_test_zstd +# include "test-libzstd.c" +#undef main + int main(int argc, char *argv[]) { main_test_libpython(); @@ -224,6 +228,7 @@ int main(int argc, char *argv[]) main_test_libaio(); main_test_reallocarray(); main_test_disassembler_four_args(); + main_test_libzstd(); return 0; } diff --git a/tools/build/feature/test-libzstd.c b/tools/build/feature/test-libzstd.c new file mode 100644 index 000000000000..55268c01b84d --- /dev/null +++ b/tools/build/feature/test-libzstd.c @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <zstd.h> + +int main(void) +{ + ZSTD_CStream *cstream; + + cstream = ZSTD_createCStream(); + ZSTD_freeCStream(cstream); + + return 0; +} diff --git a/tools/include/linux/coresight-pmu.h b/tools/include/linux/coresight-pmu.h index a1a959ba24ff..b0e35eec6499 100644 --- a/tools/include/linux/coresight-pmu.h +++ b/tools/include/linux/coresight-pmu.h @@ -12,11 +12,13 @@ /* ETMv3.5/PTM's ETMCR config bit */ #define ETM_OPT_CYCACC 12 +#define ETM_OPT_CTXTID 14 #define ETM_OPT_TS 28 #define ETM_OPT_RETSTK 29 /* ETMv4 CONFIGR programming bits for the ETM OPTs */ #define ETM4_CFG_BIT_CYCACC 4 +#define ETM4_CFG_BIT_CTXTID 6 #define ETM4_CFG_BIT_TS 11 #define ETM4_CFG_BIT_RETSTK 12 diff --git a/tools/include/linux/filter.h b/tools/include/linux/filter.h index cce0b02c0e28..ca28b6ab8db7 100644 --- a/tools/include/linux/filter.h +++ b/tools/include/linux/filter.h @@ -278,10 +278,29 @@ .off = 0, \ .imm = ((__u64) (IMM)) >> 32 }) +#define BPF_LD_IMM64_RAW_FULL(DST, SRC, OFF1, OFF2, IMM1, IMM2) \ + ((struct bpf_insn) { \ + .code = BPF_LD | BPF_DW | BPF_IMM, \ + .dst_reg = DST, \ + .src_reg = SRC, \ + .off = OFF1, \ + .imm = IMM1 }), \ + ((struct bpf_insn) { \ + .code = 0, /* zero is reserved opcode */ \ + .dst_reg = 0, \ + .src_reg = 0, \ + .off = OFF2, \ + .imm = IMM2 }) + /* pseudo BPF_LD_IMM64 insn used to refer to process-local map_fd */ #define BPF_LD_MAP_FD(DST, MAP_FD) \ - BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD) + BPF_LD_IMM64_RAW_FULL(DST, BPF_PSEUDO_MAP_FD, 0, 0, \ + MAP_FD, 0) + +#define BPF_LD_MAP_VALUE(DST, MAP_FD, VALUE_OFF) \ + BPF_LD_IMM64_RAW_FULL(DST, BPF_PSEUDO_MAP_VALUE, 0, 0, \ + MAP_FD, VALUE_OFF) /* Relative call */ diff --git a/tools/include/nolibc/nolibc.h b/tools/include/nolibc/nolibc.h index 1708e9f9f8aa..2551e9b71167 100644 --- a/tools/include/nolibc/nolibc.h +++ b/tools/include/nolibc/nolibc.h @@ -1243,6 +1243,200 @@ struct sys_stat_struct { long st_pad4[14]; }; +#elif defined(__riscv) + +#if __riscv_xlen == 64 +#define PTRLOG "3" +#define SZREG "8" +#elif __riscv_xlen == 32 +#define PTRLOG "2" +#define SZREG "4" +#endif + +/* Syscalls for RISCV : + * - stack is 16-byte aligned + * - syscall number is passed in a7 + * - arguments are in a0, a1, a2, a3, a4, a5 + * - the system call is performed by calling ecall + * - syscall return comes in a0 + * - the arguments are cast to long and assigned into the target + * registers which are then simply passed as registers to the asm code, + * so that we don't have to experience issues with register constraints. + */ + +#define my_syscall0(num) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0"); \ + \ + asm volatile ( \ + "ecall\n\t" \ + : "=r"(_arg1) \ + : "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall1(num, arg1) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall2(num, arg1, arg2) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall3(num, arg1, arg2, arg3) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + \ + asm volatile ( \ + "ecall\n\t" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall4(num, arg1, arg2, arg3, arg4) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + register long _arg4 asm("a3") = (long)(arg4); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), "r"(_arg4), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + register long _arg4 asm("a3") = (long)(arg4); \ + register long _arg5 asm("a4") = (long)(arg5); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \ +({ \ + register long _num asm("a7") = (num); \ + register long _arg1 asm("a0") = (long)(arg1); \ + register long _arg2 asm("a1") = (long)(arg2); \ + register long _arg3 asm("a2") = (long)(arg3); \ + register long _arg4 asm("a3") = (long)(arg4); \ + register long _arg5 asm("a4") = (long)(arg5); \ + register long _arg6 asm("a5") = (long)(arg6); \ + \ + asm volatile ( \ + "ecall\n" \ + : "+r"(_arg1) \ + : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), "r"(_arg6), \ + "r"(_num) \ + : "memory", "cc" \ + ); \ + _arg1; \ +}) + +/* startup code */ +asm(".section .text\n" + ".global _start\n" + "_start:\n" + ".option push\n" + ".option norelax\n" + "lla gp, __global_pointer$\n" + ".option pop\n" + "ld a0, 0(sp)\n" // argc (a0) was in the stack + "add a1, sp, "SZREG"\n" // argv (a1) = sp + "slli a2, a0, "PTRLOG"\n" // envp (a2) = SZREG*argc ... + "add a2, a2, "SZREG"\n" // + SZREG (skip null) + "add a2,a2,a1\n" // + argv + "andi sp,a1,-16\n" // sp must be 16-byte aligned + "call main\n" // main() returns the status code, we'll exit with it. + "andi a0, a0, 0xff\n" // limit exit code to 8 bits + "li a7, 93\n" // NR_exit == 93 + "ecall\n" + ""); + +/* fcntl / open */ +#define O_RDONLY 0 +#define O_WRONLY 1 +#define O_RDWR 2 +#define O_CREAT 0x100 +#define O_EXCL 0x200 +#define O_NOCTTY 0x400 +#define O_TRUNC 0x1000 +#define O_APPEND 0x2000 +#define O_NONBLOCK 0x4000 +#define O_DIRECTORY 0x200000 + +struct sys_stat_struct { + unsigned long st_dev; /* Device. */ + unsigned long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long st_rdev; /* Device number, if device. */ + unsigned long __pad1; + long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + int __pad2; + long st_blocks; /* Number 512-byte blocks allocated. */ + long st_atime; /* Time of last access. */ + unsigned long st_atime_nsec; + long st_mtime; /* Time of last modification. */ + unsigned long st_mtime_nsec; + long st_ctime; /* Time of last status change. */ + unsigned long st_ctime_nsec; + unsigned int __unused4; + unsigned int __unused5; +}; + #endif diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 929c8e537a14..63e0cf66f01a 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -105,6 +105,7 @@ enum bpf_cmd { BPF_BTF_GET_FD_BY_ID, BPF_TASK_FD_QUERY, BPF_MAP_LOOKUP_AND_DELETE_ELEM, + BPF_MAP_FREEZE, }; enum bpf_map_type { @@ -132,6 +133,7 @@ enum bpf_map_type { BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, BPF_MAP_TYPE_QUEUE, BPF_MAP_TYPE_STACK, + BPF_MAP_TYPE_SK_STORAGE, }; /* Note that tracing related programs such as @@ -166,6 +168,8 @@ enum bpf_prog_type { BPF_PROG_TYPE_LIRC_MODE2, BPF_PROG_TYPE_SK_REUSEPORT, BPF_PROG_TYPE_FLOW_DISSECTOR, + BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, }; enum bpf_attach_type { @@ -187,6 +191,7 @@ enum bpf_attach_type { BPF_CGROUP_UDP6_SENDMSG, BPF_LIRC_MODE2, BPF_FLOW_DISSECTOR, + BPF_CGROUP_SYSCTL, __MAX_BPF_ATTACH_TYPE }; @@ -255,8 +260,19 @@ enum bpf_attach_type { */ #define BPF_F_ANY_ALIGNMENT (1U << 1) -/* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */ +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * two extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_FD BPF_PSEUDO_MAP_VALUE + * insn[0].imm: map fd map fd + * insn[1].imm: 0 offset into value + * insn[0].off: 0 0 + * insn[1].off: 0 0 + * ldimm64 rewrite: address of map address of map[0]+offset + * verifier type: CONST_PTR_TO_MAP PTR_TO_MAP_VALUE + */ #define BPF_PSEUDO_MAP_FD 1 +#define BPF_PSEUDO_MAP_VALUE 2 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative * offset to another bpf function @@ -283,7 +299,7 @@ enum bpf_attach_type { #define BPF_OBJ_NAME_LEN 16U -/* Flags for accessing BPF object */ +/* Flags for accessing BPF object from syscall side. */ #define BPF_F_RDONLY (1U << 3) #define BPF_F_WRONLY (1U << 4) @@ -293,6 +309,10 @@ enum bpf_attach_type { /* Zero-initialize hash function seed. This should only be used for testing. */ #define BPF_F_ZERO_SEED (1U << 6) +/* Flags for accessing BPF object from program side. */ +#define BPF_F_RDONLY_PROG (1U << 7) +#define BPF_F_WRONLY_PROG (1U << 8) + /* flags for BPF_PROG_QUERY */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) @@ -396,6 +416,13 @@ union bpf_attr { __aligned_u64 data_out; __u32 repeat; __u32 duration; + __u32 ctx_size_in; /* input: len of ctx_in */ + __u32 ctx_size_out; /* input/output: len of ctx_out + * returns ENOSPC if ctx_out + * is too small. + */ + __aligned_u64 ctx_in; + __aligned_u64 ctx_out; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ @@ -602,7 +629,7 @@ union bpf_attr { * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ * **->swhash** and *skb*\ **->l4hash** to 0). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -627,7 +654,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -659,7 +686,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -714,7 +741,7 @@ union bpf_attr { * efficient, but it is handled through an action code where the * redirection happens only after the eBPF program has returned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -779,7 +806,7 @@ union bpf_attr { * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to * be **ETH_P_8021Q**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -791,7 +818,7 @@ union bpf_attr { * Description * Pop a VLAN header from the packet associated to *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1141,7 +1168,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1254,7 +1281,7 @@ union bpf_attr { * implicitly linearizes, unclones and drops offloads from the * *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1290,7 +1317,7 @@ union bpf_attr { * **bpf_skb_pull_data()** to effectively unclone the *skb* from * the very beginning in case it is indeed cloned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1342,7 +1369,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1357,7 +1384,7 @@ union bpf_attr { * can be used to prepare the packet for pushing or popping * headers. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1478,15 +1505,33 @@ union bpf_attr { * Grow or shrink the room for data in the packet associated to * *skb* by *len_diff*, and according to the selected *mode*. * - * There is a single supported mode at this time: + * There are two supported modes at this time: + * + * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer + * (room space is added or removed below the layer 2 header). * * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer * (room space is added or removed below the layer 3 header). * - * All values for *flags* are reserved for future usage, and must - * be left at zero. + * The following flags are supported at this time: + * + * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. + * Adjusting mss in this way is not allowed for datagrams. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: + * Any new space is reserved to hold a tunnel header. + * Configure skb offsets and other fields accordingly. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: + * Use with ENCAP_L3 flags to further specify the tunnel type. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; *len* is the length of the inner MAC header. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1565,7 +1610,7 @@ union bpf_attr { * more flexibility as the user is free to store whatever meta * data they need. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1694,12 +1739,19 @@ union bpf_attr { * error if an eBPF program tries to set a callback that is not * supported in the current kernel. * - * The supported callback values that *argval* can combine are: + * *argval* is a flag array which can combine these flags: * * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) * + * Therefore, this function can be used to clear a callback flag by + * setting the appropriate bit to zero. e.g. to disable the RTO + * callback: + * + * **bpf_sock_ops_cb_flags_set(bpf_sock,** + * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** + * * Here are some examples of where one could call such eBPF * program: * @@ -1800,7 +1852,7 @@ union bpf_attr { * copied if necessary (i.e. if data was not linear and if start * and end pointers do not point to the same chunk). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1834,7 +1886,7 @@ union bpf_attr { * only possible to shrink the packet as of this writing, * therefore *delta* must be a negative integer. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2009,18 +2061,18 @@ union bpf_attr { * **BPF_LWT_ENCAP_IP** * IP encapsulation (GRE/GUE/IPIP/etc). The outer header * must be IPv4 or IPv6, followed by zero or more - * additional headers, up to LWT_BPF_MAX_HEADROOM total - * bytes in all prepended headers. Please note that - * if skb_is_gso(skb) is true, no more than two headers - * can be prepended, and the inner header, if present, - * should be either GRE or UDP/GUE. - * - * BPF_LWT_ENCAP_SEG6*** types can be called by bpf programs of - * type BPF_PROG_TYPE_LWT_IN; BPF_LWT_ENCAP_IP type can be called - * by bpf programs of types BPF_PROG_TYPE_LWT_IN and - * BPF_PROG_TYPE_LWT_XMIT. - * - * A call to this helper is susceptible to change the underlaying + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2035,7 +2087,7 @@ union bpf_attr { * inside the outermost IPv6 Segment Routing Header can be * modified through this helper. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2051,7 +2103,7 @@ union bpf_attr { * after the segments are accepted. *delta* can be as well * positive (growing) as negative (shrinking). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2074,13 +2126,13 @@ union bpf_attr { * Type of *param*: **int**. * **SEG6_LOCAL_ACTION_END_B6** * End.B6 action: Endpoint bound to an SRv6 policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * **SEG6_LOCAL_ACTION_END_B6_ENCAP** * End.B6.Encap action: Endpoint bound to an SRv6 * encapsulation policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2233,7 +2285,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) * Description @@ -2269,7 +2322,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * int bpf_sk_release(struct bpf_sock *sock) * Description @@ -2431,6 +2485,193 @@ union bpf_attr { * Return * A **struct bpf_sock** pointer on success, or **NULL** in * case of failure. + * + * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * int bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains **sizeof**\ (**struct tcphdr**). + * + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. + * + * int bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) + * Description + * Get name of sysctl in /proc/sys/ and copy it into provided by + * program buffer *buf* of size *buf_len*. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * + * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is + * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name + * only (e.g. "tcp_mem"). + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * int bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get current value of sysctl as it is presented in /proc/sys + * (incl. newline, etc), and copy it as a string into provided + * by program buffer *buf* of size *buf_len*. + * + * The whole value is copied, no matter what file position user + * space issued e.g. sys_read at. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if current value was unavailable, e.g. because + * sysctl is uninitialized and read returns -EIO for it. + * + * int bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get new value being written by user space to sysctl (before + * the actual write happens) and copy it as a string into + * provided by program buffer *buf* of size *buf_len*. + * + * User space may write new value at file position > 0. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) + * Description + * Override new value being written by user space to sysctl with + * value provided by program in buffer *buf* of size *buf_len*. + * + * *buf* should contain a string in same form as provided by user + * space on sysctl write. + * + * User space may write new value at file position > 0. To override + * the whole sysctl value file position should be set to zero. + * Return + * 0 on success. + * + * **-E2BIG** if the *buf_len* is too big. + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to a long integer according to the given base + * and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtol**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * int bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to an unsigned long integer according to the + * given base and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)). + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtoul**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags) + * Description + * Get a bpf-local-storage from a *sk*. + * + * Logically, it could be thought of getting the value from + * a *map* with *sk* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. + * + * Underneath, the value is stored locally at *sk* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. + * + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf-local-storage will be + * created if one does not exist. *value* can be used + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf-local-storage. If *value* is + * **NULL**, the new bpf-local-storage will be zero initialized. + * Return + * A bpf-local-storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf-local-storage. + * + * int bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk) + * Description + * Delete a bpf-local-storage from a *sk*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf-local-storage cannot be found. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2531,7 +2772,17 @@ union bpf_attr { FN(sk_fullsock), \ FN(tcp_sock), \ FN(skb_ecn_set_ce), \ - FN(get_listener_sock), + FN(get_listener_sock), \ + FN(skc_lookup_tcp), \ + FN(tcp_check_syncookie), \ + FN(sysctl_get_name), \ + FN(sysctl_get_current_value), \ + FN(sysctl_get_new_value), \ + FN(sysctl_set_new_value), \ + FN(strtol), \ + FN(strtoul), \ + FN(sk_storage_get), \ + FN(sk_storage_delete), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2590,9 +2841,30 @@ enum bpf_func_id { /* Current network namespace */ #define BPF_F_CURRENT_NETNS (-1L) +/* BPF_FUNC_skb_adjust_room flags. */ +#define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) + +#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff +#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56 + +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) +#define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) +#define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) + +/* BPF_FUNC_sysctl_get_name flags. */ +#define BPF_F_SYSCTL_BASE_NAME (1ULL << 0) + +/* BPF_FUNC_sk_storage_get flags */ +#define BPF_SK_STORAGE_GET_F_CREATE (1ULL << 0) + /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { BPF_ADJ_ROOM_NET, + BPF_ADJ_ROOM_MAC, }; /* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ @@ -3218,4 +3490,14 @@ struct bpf_line_info { struct bpf_spin_lock { __u32 val; }; + +struct bpf_sysctl { + __u32 write; /* Sysctl is being read (= 0) or written (= 1). + * Allows 1,2,4-byte read, but no write. + */ + __u32 file_pos; /* Sysctl file position to read from, write to. + * Allows 1,2,4-byte read an 4-byte write. + */ +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h index 7b7475ef2f17..63ae4a39e58b 100644 --- a/tools/include/uapi/linux/btf.h +++ b/tools/include/uapi/linux/btf.h @@ -39,11 +39,11 @@ struct btf_type { * struct, union and fwd */ __u32 info; - /* "size" is used by INT, ENUM, STRUCT and UNION. + /* "size" is used by INT, ENUM, STRUCT, UNION and DATASEC. * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC and FUNC_PROTO. + * FUNC, FUNC_PROTO and VAR. * "type" is a type_id referring to another type. */ union { @@ -70,8 +70,10 @@ struct btf_type { #define BTF_KIND_RESTRICT 11 /* Restrict */ #define BTF_KIND_FUNC 12 /* Function */ #define BTF_KIND_FUNC_PROTO 13 /* Function Proto */ -#define BTF_KIND_MAX 13 -#define NR_BTF_KINDS 14 +#define BTF_KIND_VAR 14 /* Variable */ +#define BTF_KIND_DATASEC 15 /* Section */ +#define BTF_KIND_MAX BTF_KIND_DATASEC +#define NR_BTF_KINDS (BTF_KIND_MAX + 1) /* For some specific BTF_KIND, "struct btf_type" is immediately * followed by extra data. @@ -81,7 +83,7 @@ struct btf_type { * is the 32 bits arrangement: */ #define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) -#define BTF_INT_OFFSET(VAL) (((VAL & 0x00ff0000)) >> 16) +#define BTF_INT_OFFSET(VAL) (((VAL) & 0x00ff0000) >> 16) #define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) /* Attributes stored in the BTF_INT_ENCODING */ @@ -138,4 +140,26 @@ struct btf_param { __u32 type; }; +enum { + BTF_VAR_STATIC = 0, + BTF_VAR_GLOBAL_ALLOCATED, +}; + +/* BTF_KIND_VAR is followed by a single "struct btf_var" to describe + * additional information related to the variable such as its linkage. + */ +struct btf_var { + __u32 linkage; +}; + +/* BTF_KIND_DATASEC is followed by multiple "struct btf_var_secinfo" + * to describe all BTF_KIND_VAR types it contains along with it's + * in-section offset as well as size. + */ +struct btf_var_secinfo { + __u32 type; + __u32 offset; + __u32 size; +}; + #endif /* _UAPI__LINUX_BTF_H__ */ diff --git a/tools/include/uapi/sound/asound.h b/tools/include/uapi/sound/asound.h index 404d4b9ffe76..df1153cea0b7 100644 --- a/tools/include/uapi/sound/asound.h +++ b/tools/include/uapi/sound/asound.h @@ -32,6 +32,7 @@ #ifndef __KERNEL__ #include <stdlib.h> +#include <time.h> #endif /* diff --git a/tools/io_uring/io_uring-bench.c b/tools/io_uring/io_uring-bench.c index 512306a37531..0f257139b003 100644 --- a/tools/io_uring/io_uring-bench.c +++ b/tools/io_uring/io_uring-bench.c @@ -32,10 +32,6 @@ #include "liburing.h" #include "barrier.h" -#ifndef IOCQE_FLAG_CACHEHIT -#define IOCQE_FLAG_CACHEHIT (1U << 0) -#endif - #define min(a, b) ((a < b) ? (a) : (b)) struct io_sq_ring { @@ -85,7 +81,6 @@ struct submitter { unsigned long reaps; unsigned long done; unsigned long calls; - unsigned long cachehit, cachemiss; volatile int finish; __s32 *fds; @@ -270,10 +265,6 @@ static int reap_events(struct submitter *s) return -1; } } - if (cqe->flags & IOCQE_FLAG_CACHEHIT) - s->cachehit++; - else - s->cachemiss++; reaped++; head++; } while (1); @@ -489,7 +480,7 @@ static void file_depths(char *buf) int main(int argc, char *argv[]) { struct submitter *s = &submitters[0]; - unsigned long done, calls, reap, cache_hit, cache_miss; + unsigned long done, calls, reap; int err, i, flags, fd; char *fdepths; void *ret; @@ -569,44 +560,29 @@ int main(int argc, char *argv[]) pthread_create(&s->thread, NULL, submitter_fn, s); fdepths = malloc(8 * s->nr_files); - cache_hit = cache_miss = reap = calls = done = 0; + reap = calls = done = 0; do { unsigned long this_done = 0; unsigned long this_reap = 0; unsigned long this_call = 0; - unsigned long this_cache_hit = 0; - unsigned long this_cache_miss = 0; unsigned long rpc = 0, ipc = 0; - double hit = 0.0; sleep(1); this_done += s->done; this_call += s->calls; this_reap += s->reaps; - this_cache_hit += s->cachehit; - this_cache_miss += s->cachemiss; - if (this_cache_hit && this_cache_miss) { - unsigned long hits, total; - - hits = this_cache_hit - cache_hit; - total = hits + this_cache_miss - cache_miss; - hit = (double) hits / (double) total; - hit *= 100.0; - } if (this_call - calls) { rpc = (this_done - done) / (this_call - calls); ipc = (this_reap - reap) / (this_call - calls); } else rpc = ipc = -1; file_depths(fdepths); - printf("IOPS=%lu, IOS/call=%ld/%ld, inflight=%u (%s), Cachehit=%0.2f%%\n", + printf("IOPS=%lu, IOS/call=%ld/%ld, inflight=%u (%s)\n", this_done - done, rpc, ipc, s->inflight, - fdepths, hit); + fdepths); done = this_done; calls = this_call; reap = this_reap; - cache_hit = s->cachehit; - cache_miss = s->cachemiss; } while (!finish); pthread_join(s->thread, &ret); diff --git a/tools/lib/bpf/.gitignore b/tools/lib/bpf/.gitignore index 4db74758c674..d9e9dec04605 100644 --- a/tools/lib/bpf/.gitignore +++ b/tools/lib/bpf/.gitignore @@ -1,3 +1,5 @@ libbpf_version.h +libbpf.pc FEATURE-DUMP.libbpf test_libbpf +libbpf.so.* diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile index 5bf8e52c41fc..f91639bf5650 100644 --- a/tools/lib/bpf/Makefile +++ b/tools/lib/bpf/Makefile @@ -3,7 +3,7 @@ BPF_VERSION = 0 BPF_PATCHLEVEL = 0 -BPF_EXTRAVERSION = 2 +BPF_EXTRAVERSION = 3 MAKEFLAGS += --no-print-directory @@ -90,6 +90,7 @@ LIBBPF_VERSION = $(BPF_VERSION).$(BPF_PATCHLEVEL).$(BPF_EXTRAVERSION) LIB_TARGET = libbpf.a libbpf.so.$(LIBBPF_VERSION) LIB_FILE = libbpf.a libbpf.so* +PC_FILE = libbpf.pc # Set compile option CFLAGS ifdef EXTRA_CFLAGS @@ -134,13 +135,14 @@ VERSION_SCRIPT := libbpf.map LIB_TARGET := $(addprefix $(OUTPUT),$(LIB_TARGET)) LIB_FILE := $(addprefix $(OUTPUT),$(LIB_FILE)) +PC_FILE := $(addprefix $(OUTPUT),$(PC_FILE)) GLOBAL_SYM_COUNT = $(shell readelf -s --wide $(BPF_IN) | \ awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {s++} END{print s}') VERSIONED_SYM_COUNT = $(shell readelf -s --wide $(OUTPUT)libbpf.so | \ grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | sort -u | wc -l) -CMD_TARGETS = $(LIB_TARGET) +CMD_TARGETS = $(LIB_TARGET) $(PC_FILE) CXX_TEST_TARGET = $(OUTPUT)test_libbpf @@ -177,7 +179,7 @@ $(OUTPUT)libbpf.so: $(OUTPUT)libbpf.so.$(LIBBPF_VERSION) $(OUTPUT)libbpf.so.$(LIBBPF_VERSION): $(BPF_IN) $(QUIET_LINK)$(CC) --shared -Wl,-soname,libbpf.so.$(VERSION) \ - -Wl,--version-script=$(VERSION_SCRIPT) $^ -o $@ + -Wl,--version-script=$(VERSION_SCRIPT) $^ -lelf -o $@ @ln -sf $(@F) $(OUTPUT)libbpf.so @ln -sf $(@F) $(OUTPUT)libbpf.so.$(VERSION) @@ -187,6 +189,12 @@ $(OUTPUT)libbpf.a: $(BPF_IN) $(OUTPUT)test_libbpf: test_libbpf.cpp $(OUTPUT)libbpf.a $(QUIET_LINK)$(CXX) $(INCLUDES) $^ -lelf -o $@ +$(OUTPUT)libbpf.pc: + $(QUIET_GEN)sed -e "s|@PREFIX@|$(prefix)|" \ + -e "s|@LIBDIR@|$(libdir_SQ)|" \ + -e "s|@VERSION@|$(LIBBPF_VERSION)|" \ + < libbpf.pc.template > $@ + check: check_abi check_abi: $(OUTPUT)libbpf.so @@ -220,10 +228,16 @@ install_lib: all_cmd install_headers: $(call QUIET_INSTALL, headers) \ $(call do_install,bpf.h,$(prefix)/include/bpf,644); \ - $(call do_install,libbpf.h,$(prefix)/include/bpf,644); - $(call do_install,btf.h,$(prefix)/include/bpf,644); + $(call do_install,libbpf.h,$(prefix)/include/bpf,644); \ + $(call do_install,btf.h,$(prefix)/include/bpf,644); \ + $(call do_install,libbpf_util.h,$(prefix)/include/bpf,644); \ + $(call do_install,xsk.h,$(prefix)/include/bpf,644); + +install_pkgconfig: $(PC_FILE) + $(call QUIET_INSTALL, $(PC_FILE)) \ + $(call do_install,$(PC_FILE),$(libdir_SQ)/pkgconfig,644) -install: install_lib +install: install_lib install_pkgconfig ### Cleaning rules @@ -233,7 +247,7 @@ config-clean: clean: $(call QUIET_CLEAN, libbpf) $(RM) $(TARGETS) $(CXX_TEST_TARGET) \ - *.o *~ *.a *.so *.so.$(VERSION) .*.d .*.cmd LIBBPF-CFLAGS + *.o *~ *.a *.so *.so.$(VERSION) .*.d .*.cmd *.pc LIBBPF-CFLAGS $(call QUIET_CLEAN, core-gen) $(RM) $(OUTPUT)FEATURE-DUMP.libbpf diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c index 9cd015574e83..c4a48086dc9a 100644 --- a/tools/lib/bpf/bpf.c +++ b/tools/lib/bpf/bpf.c @@ -46,6 +46,8 @@ # define __NR_bpf 349 # elif defined(__s390__) # define __NR_bpf 351 +# elif defined(__arc__) +# define __NR_bpf 280 # else # error __NR_bpf not defined. libbpf does not support your arch. # endif @@ -79,7 +81,6 @@ static inline int sys_bpf_prog_load(union bpf_attr *attr, unsigned int size) int bpf_create_map_xattr(const struct bpf_create_map_attr *create_attr) { - __u32 name_len = create_attr->name ? strlen(create_attr->name) : 0; union bpf_attr attr; memset(&attr, '\0', sizeof(attr)); @@ -89,8 +90,9 @@ int bpf_create_map_xattr(const struct bpf_create_map_attr *create_attr) attr.value_size = create_attr->value_size; attr.max_entries = create_attr->max_entries; attr.map_flags = create_attr->map_flags; - memcpy(attr.map_name, create_attr->name, - min(name_len, BPF_OBJ_NAME_LEN - 1)); + if (create_attr->name) + memcpy(attr.map_name, create_attr->name, + min(strlen(create_attr->name), BPF_OBJ_NAME_LEN - 1)); attr.numa_node = create_attr->numa_node; attr.btf_fd = create_attr->btf_fd; attr.btf_key_type_id = create_attr->btf_key_type_id; @@ -155,7 +157,6 @@ int bpf_create_map_in_map_node(enum bpf_map_type map_type, const char *name, int key_size, int inner_map_fd, int max_entries, __u32 map_flags, int node) { - __u32 name_len = name ? strlen(name) : 0; union bpf_attr attr; memset(&attr, '\0', sizeof(attr)); @@ -166,7 +167,9 @@ int bpf_create_map_in_map_node(enum bpf_map_type map_type, const char *name, attr.inner_map_fd = inner_map_fd; attr.max_entries = max_entries; attr.map_flags = map_flags; - memcpy(attr.map_name, name, min(name_len, BPF_OBJ_NAME_LEN - 1)); + if (name) + memcpy(attr.map_name, name, + min(strlen(name), BPF_OBJ_NAME_LEN - 1)); if (node >= 0) { attr.map_flags |= BPF_F_NUMA_NODE; @@ -216,18 +219,15 @@ int bpf_load_program_xattr(const struct bpf_load_program_attr *load_attr, void *finfo = NULL, *linfo = NULL; union bpf_attr attr; __u32 log_level; - __u32 name_len; int fd; if (!load_attr || !log_buf != !log_buf_sz) return -EINVAL; log_level = load_attr->log_level; - if (log_level > 2 || (log_level && !log_buf)) + if (log_level > (4 | 2 | 1) || (log_level && !log_buf)) return -EINVAL; - name_len = load_attr->name ? strlen(load_attr->name) : 0; - memset(&attr, 0, sizeof(attr)); attr.prog_type = load_attr->prog_type; attr.expected_attach_type = load_attr->expected_attach_type; @@ -253,8 +253,9 @@ int bpf_load_program_xattr(const struct bpf_load_program_attr *load_attr, attr.line_info_rec_size = load_attr->line_info_rec_size; attr.line_info_cnt = load_attr->line_info_cnt; attr.line_info = ptr_to_u64(load_attr->line_info); - memcpy(attr.prog_name, load_attr->name, - min(name_len, BPF_OBJ_NAME_LEN - 1)); + if (load_attr->name) + memcpy(attr.prog_name, load_attr->name, + min(strlen(load_attr->name), BPF_OBJ_NAME_LEN - 1)); fd = sys_bpf_prog_load(&attr, sizeof(attr)); if (fd >= 0) @@ -429,6 +430,16 @@ int bpf_map_get_next_key(int fd, const void *key, void *next_key) return sys_bpf(BPF_MAP_GET_NEXT_KEY, &attr, sizeof(attr)); } +int bpf_map_freeze(int fd) +{ + union bpf_attr attr; + + memset(&attr, 0, sizeof(attr)); + attr.map_fd = fd; + + return sys_bpf(BPF_MAP_FREEZE, &attr, sizeof(attr)); +} + int bpf_obj_pin(int fd, const char *pathname) { union bpf_attr attr; @@ -545,10 +556,15 @@ int bpf_prog_test_run_xattr(struct bpf_prog_test_run_attr *test_attr) attr.test.data_out = ptr_to_u64(test_attr->data_out); attr.test.data_size_in = test_attr->data_size_in; attr.test.data_size_out = test_attr->data_size_out; + attr.test.ctx_in = ptr_to_u64(test_attr->ctx_in); + attr.test.ctx_out = ptr_to_u64(test_attr->ctx_out); + attr.test.ctx_size_in = test_attr->ctx_size_in; + attr.test.ctx_size_out = test_attr->ctx_size_out; attr.test.repeat = test_attr->repeat; ret = sys_bpf(BPF_PROG_TEST_RUN, &attr, sizeof(attr)); test_attr->data_size_out = attr.test.data_size_out; + test_attr->ctx_size_out = attr.test.ctx_size_out; test_attr->retval = attr.test.retval; test_attr->duration = attr.test.duration; return ret; diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h index 6ffdd79bea89..9593fec75652 100644 --- a/tools/lib/bpf/bpf.h +++ b/tools/lib/bpf/bpf.h @@ -26,6 +26,7 @@ #include <linux/bpf.h> #include <stdbool.h> #include <stddef.h> +#include <stdint.h> #ifdef __cplusplus extern "C" { @@ -92,7 +93,7 @@ struct bpf_load_program_attr { #define MAPS_RELAX_COMPAT 0x01 /* Recommend log buffer size */ -#define BPF_LOG_BUF_SIZE (256 * 1024) +#define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */ LIBBPF_API int bpf_load_program_xattr(const struct bpf_load_program_attr *load_attr, char *log_buf, size_t log_buf_sz); @@ -117,6 +118,7 @@ LIBBPF_API int bpf_map_lookup_and_delete_elem(int fd, const void *key, void *value); LIBBPF_API int bpf_map_delete_elem(int fd, const void *key); LIBBPF_API int bpf_map_get_next_key(int fd, const void *key, void *next_key); +LIBBPF_API int bpf_map_freeze(int fd); LIBBPF_API int bpf_obj_pin(int fd, const char *pathname); LIBBPF_API int bpf_obj_get(const char *pathname); LIBBPF_API int bpf_prog_attach(int prog_fd, int attachable_fd, @@ -135,6 +137,11 @@ struct bpf_prog_test_run_attr { * out: length of data_out */ __u32 retval; /* out: return code of the BPF program */ __u32 duration; /* out: average per repetition in ns */ + const void *ctx_in; /* optional */ + __u32 ctx_size_in; + void *ctx_out; /* optional */ + __u32 ctx_size_out; /* in: max length of ctx_out + * out: length of cxt_out */ }; LIBBPF_API int bpf_prog_test_run_xattr(struct bpf_prog_test_run_attr *test_attr); diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c index 87e3020ac1bc..03348c4d6bd4 100644 --- a/tools/lib/bpf/btf.c +++ b/tools/lib/bpf/btf.c @@ -11,7 +11,7 @@ #include "btf.h" #include "bpf.h" #include "libbpf.h" -#include "libbpf_util.h" +#include "libbpf_internal.h" #define max(a, b) ((a) > (b) ? (a) : (b)) #define min(a, b) ((a) < (b) ? (a) : (b)) @@ -24,6 +24,8 @@ ((k) == BTF_KIND_CONST) || \ ((k) == BTF_KIND_RESTRICT)) +#define IS_VAR(k) ((k) == BTF_KIND_VAR) + static struct btf_type btf_void; struct btf { @@ -212,6 +214,10 @@ static int btf_type_size(struct btf_type *t) return base_size + vlen * sizeof(struct btf_member); case BTF_KIND_FUNC_PROTO: return base_size + vlen * sizeof(struct btf_param); + case BTF_KIND_VAR: + return base_size + sizeof(struct btf_var); + case BTF_KIND_DATASEC: + return base_size + vlen * sizeof(struct btf_var_secinfo); default: pr_debug("Unsupported BTF_KIND:%u\n", BTF_INFO_KIND(t->info)); return -EINVAL; @@ -283,6 +289,7 @@ __s64 btf__resolve_size(const struct btf *btf, __u32 type_id) case BTF_KIND_STRUCT: case BTF_KIND_UNION: case BTF_KIND_ENUM: + case BTF_KIND_DATASEC: size = t->size; goto done; case BTF_KIND_PTR: @@ -292,6 +299,7 @@ __s64 btf__resolve_size(const struct btf *btf, __u32 type_id) case BTF_KIND_VOLATILE: case BTF_KIND_CONST: case BTF_KIND_RESTRICT: + case BTF_KIND_VAR: type_id = t->type; break; case BTF_KIND_ARRAY: @@ -326,7 +334,8 @@ int btf__resolve_type(const struct btf *btf, __u32 type_id) t = btf__type_by_id(btf, type_id); while (depth < MAX_RESOLVE_DEPTH && !btf_type_is_void_or_null(t) && - IS_MODIFIER(BTF_INFO_KIND(t->info))) { + (IS_MODIFIER(BTF_INFO_KIND(t->info)) || + IS_VAR(BTF_INFO_KIND(t->info)))) { type_id = t->type; t = btf__type_by_id(btf, type_id); depth++; @@ -408,6 +417,92 @@ done: return btf; } +static int compare_vsi_off(const void *_a, const void *_b) +{ + const struct btf_var_secinfo *a = _a; + const struct btf_var_secinfo *b = _b; + + return a->offset - b->offset; +} + +static int btf_fixup_datasec(struct bpf_object *obj, struct btf *btf, + struct btf_type *t) +{ + __u32 size = 0, off = 0, i, vars = BTF_INFO_VLEN(t->info); + const char *name = btf__name_by_offset(btf, t->name_off); + const struct btf_type *t_var; + struct btf_var_secinfo *vsi; + struct btf_var *var; + int ret; + + if (!name) { + pr_debug("No name found in string section for DATASEC kind.\n"); + return -ENOENT; + } + + ret = bpf_object__section_size(obj, name, &size); + if (ret || !size || (t->size && t->size != size)) { + pr_debug("Invalid size for section %s: %u bytes\n", name, size); + return -ENOENT; + } + + t->size = size; + + for (i = 0, vsi = (struct btf_var_secinfo *)(t + 1); + i < vars; i++, vsi++) { + t_var = btf__type_by_id(btf, vsi->type); + var = (struct btf_var *)(t_var + 1); + + if (BTF_INFO_KIND(t_var->info) != BTF_KIND_VAR) { + pr_debug("Non-VAR type seen in section %s\n", name); + return -EINVAL; + } + + if (var->linkage == BTF_VAR_STATIC) + continue; + + name = btf__name_by_offset(btf, t_var->name_off); + if (!name) { + pr_debug("No name found in string section for VAR kind\n"); + return -ENOENT; + } + + ret = bpf_object__variable_offset(obj, name, &off); + if (ret) { + pr_debug("No offset found in symbol table for VAR %s\n", name); + return -ENOENT; + } + + vsi->offset = off; + } + + qsort(t + 1, vars, sizeof(*vsi), compare_vsi_off); + return 0; +} + +int btf__finalize_data(struct bpf_object *obj, struct btf *btf) +{ + int err = 0; + __u32 i; + + for (i = 1; i <= btf->nr_types; i++) { + struct btf_type *t = btf->types[i]; + + /* Loader needs to fix up some of the things compiler + * couldn't get its hands on while emitting BTF. This + * is section size and global variable offset. We use + * the info from the ELF itself for this purpose. + */ + if (BTF_INFO_KIND(t->info) == BTF_KIND_DATASEC) { + err = btf_fixup_datasec(obj, btf, t); + if (err) + break; + } + } + + return err; +} + int btf__load(struct btf *btf) { __u32 log_buf_size = BPF_LOG_BUF_SIZE; @@ -1259,8 +1354,16 @@ static struct btf_dedup *btf_dedup_new(struct btf *btf, struct btf_ext *btf_ext, } /* special BTF "void" type is made canonical immediately */ d->map[0] = 0; - for (i = 1; i <= btf->nr_types; i++) - d->map[i] = BTF_UNPROCESSED_ID; + for (i = 1; i <= btf->nr_types; i++) { + struct btf_type *t = d->btf->types[i]; + __u16 kind = BTF_INFO_KIND(t->info); + + /* VAR and DATASEC are never deduped and are self-canonical */ + if (kind == BTF_KIND_VAR || kind == BTF_KIND_DATASEC) + d->map[i] = i; + else + d->map[i] = BTF_UNPROCESSED_ID; + } d->hypot_map = malloc(sizeof(__u32) * (1 + btf->nr_types)); if (!d->hypot_map) { @@ -1851,6 +1954,8 @@ static int btf_dedup_prim_type(struct btf_dedup *d, __u32 type_id) case BTF_KIND_UNION: case BTF_KIND_FUNC: case BTF_KIND_FUNC_PROTO: + case BTF_KIND_VAR: + case BTF_KIND_DATASEC: return 0; case BTF_KIND_INT: @@ -2107,6 +2212,9 @@ static int btf_dedup_is_equiv(struct btf_dedup *d, __u32 cand_id, return fwd_kind == real_kind; } + if (cand_kind != canon_kind) + return 0; + switch (cand_kind) { case BTF_KIND_INT: return btf_equal_int(cand_type, canon_type); @@ -2601,6 +2709,7 @@ static int btf_dedup_remap_type(struct btf_dedup *d, __u32 type_id) case BTF_KIND_PTR: case BTF_KIND_TYPEDEF: case BTF_KIND_FUNC: + case BTF_KIND_VAR: r = btf_dedup_remap_type_id(d, t->type); if (r < 0) return r; @@ -2655,6 +2764,20 @@ static int btf_dedup_remap_type(struct btf_dedup *d, __u32 type_id) break; } + case BTF_KIND_DATASEC: { + struct btf_var_secinfo *var = (struct btf_var_secinfo *)(t + 1); + __u16 vlen = BTF_INFO_VLEN(t->info); + + for (i = 0; i < vlen; i++) { + r = btf_dedup_remap_type_id(d, var->type); + if (r < 0) + return r; + var->type = r; + var++; + } + break; + } + default: return -EINVAL; } diff --git a/tools/lib/bpf/btf.h b/tools/lib/bpf/btf.h index 28a1e1e59861..c7b399e81fce 100644 --- a/tools/lib/bpf/btf.h +++ b/tools/lib/bpf/btf.h @@ -21,6 +21,8 @@ struct btf; struct btf_ext; struct btf_type; +struct bpf_object; + /* * The .BTF.ext ELF section layout defined as * struct btf_ext_header @@ -57,6 +59,7 @@ struct btf_ext_header { LIBBPF_API void btf__free(struct btf *btf); LIBBPF_API struct btf *btf__new(__u8 *data, __u32 size); +LIBBPF_API int btf__finalize_data(struct bpf_object *obj, struct btf *btf); LIBBPF_API int btf__load(struct btf *btf); LIBBPF_API __s32 btf__find_by_name(const struct btf *btf, const char *type_name); diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 11c25d9ea431..197b574406b3 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -7,6 +7,7 @@ * Copyright (C) 2015 Wang Nan <wangnan0@huawei.com> * Copyright (C) 2015 Huawei Inc. * Copyright (C) 2017 Nicira, Inc. + * Copyright (C) 2019 Isovalent, Inc. */ #ifndef _GNU_SOURCE @@ -42,7 +43,7 @@ #include "bpf.h" #include "btf.h" #include "str_error.h" -#include "libbpf_util.h" +#include "libbpf_internal.h" #ifndef EM_BPF #define EM_BPF 247 @@ -52,6 +53,11 @@ #define BPF_FS_MAGIC 0xcafe4a11 #endif +/* vsprintf() in __base_pr() uses nonliteral format string. It may break + * compilation if user enables corresponding warning. Disable it explicitly. + */ +#pragma GCC diagnostic ignored "-Wformat-nonliteral" + #define __printf(a, b) __attribute__((format(printf, a, b))) static int __base_pr(enum libbpf_print_level level, const char *format, @@ -120,6 +126,12 @@ static inline __u64 ptr_to_u64(const void *ptr) struct bpf_capabilities { /* v4.14: kernel support for program & map names. */ __u32 name:1; + /* v5.2: kernel support for global data sections. */ + __u32 global_data:1; + /* BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO support */ + __u32 btf_func:1; + /* BTF_KIND_VAR and BTF_KIND_DATASEC support */ + __u32 btf_datasec:1; }; /* @@ -144,6 +156,7 @@ struct bpf_program { enum { RELO_LD64, RELO_CALL, + RELO_DATA, } type; int insn_idx; union { @@ -152,6 +165,7 @@ struct bpf_program { }; } *reloc_desc; int nr_reloc; + int log_level; struct { int nr; @@ -176,6 +190,19 @@ struct bpf_program { __u32 line_info_cnt; }; +enum libbpf_map_type { + LIBBPF_MAP_UNSPEC, + LIBBPF_MAP_DATA, + LIBBPF_MAP_BSS, + LIBBPF_MAP_RODATA, +}; + +static const char * const libbpf_type_to_btf_name[] = { + [LIBBPF_MAP_DATA] = ".data", + [LIBBPF_MAP_BSS] = ".bss", + [LIBBPF_MAP_RODATA] = ".rodata", +}; + struct bpf_map { int fd; char *name; @@ -187,11 +214,18 @@ struct bpf_map { __u32 btf_value_type_id; void *priv; bpf_map_clear_priv_t clear_priv; + enum libbpf_map_type libbpf_type; +}; + +struct bpf_secdata { + void *rodata; + void *data; }; static LIST_HEAD(bpf_objects_list); struct bpf_object { + char name[BPF_OBJ_NAME_LEN]; char license[64]; __u32 kern_version; @@ -199,6 +233,7 @@ struct bpf_object { size_t nr_programs; struct bpf_map *maps; size_t nr_maps; + struct bpf_secdata sections; bool loaded; bool has_pseudo_calls; @@ -214,6 +249,9 @@ struct bpf_object { Elf *elf; GElf_Ehdr ehdr; Elf_Data *symbols; + Elf_Data *data; + Elf_Data *rodata; + Elf_Data *bss; size_t strtabidx; struct { GElf_Shdr shdr; @@ -222,6 +260,9 @@ struct bpf_object { int nr_reloc; int maps_shndx; int text_shndx; + int data_shndx; + int rodata_shndx; + int bss_shndx; } efile; /* * All loaded bpf_object is linked in a list, which is @@ -443,6 +484,7 @@ static struct bpf_object *bpf_object__new(const char *path, size_t obj_buf_sz) { struct bpf_object *obj; + char *end; obj = calloc(1, sizeof(struct bpf_object) + strlen(path) + 1); if (!obj) { @@ -451,8 +493,14 @@ static struct bpf_object *bpf_object__new(const char *path, } strcpy(obj->path, path); - obj->efile.fd = -1; + /* Using basename() GNU version which doesn't modify arg. */ + strncpy(obj->name, basename((void *)path), + sizeof(obj->name) - 1); + end = strchr(obj->name, '.'); + if (end) + *end = 0; + obj->efile.fd = -1; /* * Caller of this function should also calls * bpf_object__elf_finish() after data collection to return @@ -462,6 +510,9 @@ static struct bpf_object *bpf_object__new(const char *path, obj->efile.obj_buf = obj_buf; obj->efile.obj_buf_sz = obj_buf_sz; obj->efile.maps_shndx = -1; + obj->efile.data_shndx = -1; + obj->efile.rodata_shndx = -1; + obj->efile.bss_shndx = -1; obj->loaded = false; @@ -480,6 +531,9 @@ static void bpf_object__elf_finish(struct bpf_object *obj) obj->efile.elf = NULL; } obj->efile.symbols = NULL; + obj->efile.data = NULL; + obj->efile.rodata = NULL; + obj->efile.bss = NULL; zfree(&obj->efile.reloc); obj->efile.nr_reloc = 0; @@ -621,27 +675,182 @@ static bool bpf_map_type__is_map_in_map(enum bpf_map_type type) return false; } +static int bpf_object_search_section_size(const struct bpf_object *obj, + const char *name, size_t *d_size) +{ + const GElf_Ehdr *ep = &obj->efile.ehdr; + Elf *elf = obj->efile.elf; + Elf_Scn *scn = NULL; + int idx = 0; + + while ((scn = elf_nextscn(elf, scn)) != NULL) { + const char *sec_name; + Elf_Data *data; + GElf_Shdr sh; + + idx++; + if (gelf_getshdr(scn, &sh) != &sh) { + pr_warning("failed to get section(%d) header from %s\n", + idx, obj->path); + return -EIO; + } + + sec_name = elf_strptr(elf, ep->e_shstrndx, sh.sh_name); + if (!sec_name) { + pr_warning("failed to get section(%d) name from %s\n", + idx, obj->path); + return -EIO; + } + + if (strcmp(name, sec_name)) + continue; + + data = elf_getdata(scn, 0); + if (!data) { + pr_warning("failed to get section(%d) data from %s(%s)\n", + idx, name, obj->path); + return -EIO; + } + + *d_size = data->d_size; + return 0; + } + + return -ENOENT; +} + +int bpf_object__section_size(const struct bpf_object *obj, const char *name, + __u32 *size) +{ + int ret = -ENOENT; + size_t d_size; + + *size = 0; + if (!name) { + return -EINVAL; + } else if (!strcmp(name, ".data")) { + if (obj->efile.data) + *size = obj->efile.data->d_size; + } else if (!strcmp(name, ".bss")) { + if (obj->efile.bss) + *size = obj->efile.bss->d_size; + } else if (!strcmp(name, ".rodata")) { + if (obj->efile.rodata) + *size = obj->efile.rodata->d_size; + } else { + ret = bpf_object_search_section_size(obj, name, &d_size); + if (!ret) + *size = d_size; + } + + return *size ? 0 : ret; +} + +int bpf_object__variable_offset(const struct bpf_object *obj, const char *name, + __u32 *off) +{ + Elf_Data *symbols = obj->efile.symbols; + const char *sname; + size_t si; + + if (!name || !off) + return -EINVAL; + + for (si = 0; si < symbols->d_size / sizeof(GElf_Sym); si++) { + GElf_Sym sym; + + if (!gelf_getsym(symbols, si, &sym)) + continue; + if (GELF_ST_BIND(sym.st_info) != STB_GLOBAL || + GELF_ST_TYPE(sym.st_info) != STT_OBJECT) + continue; + + sname = elf_strptr(obj->efile.elf, obj->efile.strtabidx, + sym.st_name); + if (!sname) { + pr_warning("failed to get sym name string for var %s\n", + name); + return -EIO; + } + if (strcmp(name, sname) == 0) { + *off = sym.st_value; + return 0; + } + } + + return -ENOENT; +} + +static bool bpf_object__has_maps(const struct bpf_object *obj) +{ + return obj->efile.maps_shndx >= 0 || + obj->efile.data_shndx >= 0 || + obj->efile.rodata_shndx >= 0 || + obj->efile.bss_shndx >= 0; +} + +static int +bpf_object__init_internal_map(struct bpf_object *obj, struct bpf_map *map, + enum libbpf_map_type type, Elf_Data *data, + void **data_buff) +{ + struct bpf_map_def *def = &map->def; + char map_name[BPF_OBJ_NAME_LEN]; + + map->libbpf_type = type; + map->offset = ~(typeof(map->offset))0; + snprintf(map_name, sizeof(map_name), "%.8s%.7s", obj->name, + libbpf_type_to_btf_name[type]); + map->name = strdup(map_name); + if (!map->name) { + pr_warning("failed to alloc map name\n"); + return -ENOMEM; + } + + def->type = BPF_MAP_TYPE_ARRAY; + def->key_size = sizeof(int); + def->value_size = data->d_size; + def->max_entries = 1; + def->map_flags = type == LIBBPF_MAP_RODATA ? + BPF_F_RDONLY_PROG : 0; + if (data_buff) { + *data_buff = malloc(data->d_size); + if (!*data_buff) { + zfree(&map->name); + pr_warning("failed to alloc map content buffer\n"); + return -ENOMEM; + } + memcpy(*data_buff, data->d_buf, data->d_size); + } + + pr_debug("map %td is \"%s\"\n", map - obj->maps, map->name); + return 0; +} + static int bpf_object__init_maps(struct bpf_object *obj, int flags) { + int i, map_idx, map_def_sz = 0, nr_syms, nr_maps = 0, nr_maps_glob = 0; bool strict = !(flags & MAPS_RELAX_COMPAT); - int i, map_idx, map_def_sz, nr_maps = 0; - Elf_Scn *scn; - Elf_Data *data = NULL; Elf_Data *symbols = obj->efile.symbols; + Elf_Data *data = NULL; + int ret = 0; - if (obj->efile.maps_shndx < 0) - return -EINVAL; if (!symbols) return -EINVAL; + nr_syms = symbols->d_size / sizeof(GElf_Sym); - scn = elf_getscn(obj->efile.elf, obj->efile.maps_shndx); - if (scn) - data = elf_getdata(scn, NULL); - if (!scn || !data) { - pr_warning("failed to get Elf_Data from map section %d\n", - obj->efile.maps_shndx); - return -EINVAL; + if (obj->efile.maps_shndx >= 0) { + Elf_Scn *scn = elf_getscn(obj->efile.elf, + obj->efile.maps_shndx); + + if (scn) + data = elf_getdata(scn, NULL); + if (!scn || !data) { + pr_warning("failed to get Elf_Data from map section %d\n", + obj->efile.maps_shndx); + return -EINVAL; + } } /* @@ -651,7 +860,16 @@ bpf_object__init_maps(struct bpf_object *obj, int flags) * * TODO: Detect array of map and report error. */ - for (i = 0; i < symbols->d_size / sizeof(GElf_Sym); i++) { + if (obj->caps.global_data) { + if (obj->efile.data_shndx >= 0) + nr_maps_glob++; + if (obj->efile.rodata_shndx >= 0) + nr_maps_glob++; + if (obj->efile.bss_shndx >= 0) + nr_maps_glob++; + } + + for (i = 0; data && i < nr_syms; i++) { GElf_Sym sym; if (!gelf_getsym(symbols, i, &sym)) @@ -661,22 +879,24 @@ bpf_object__init_maps(struct bpf_object *obj, int flags) nr_maps++; } - /* Alloc obj->maps and fill nr_maps. */ - pr_debug("maps in %s: %d maps in %zd bytes\n", obj->path, - nr_maps, data->d_size); - - if (!nr_maps) + if (!nr_maps && !nr_maps_glob) return 0; /* Assume equally sized map definitions */ - map_def_sz = data->d_size / nr_maps; - if (!data->d_size || (data->d_size % nr_maps) != 0) { - pr_warning("unable to determine map definition size " - "section %s, %d maps in %zd bytes\n", - obj->path, nr_maps, data->d_size); - return -EINVAL; + if (data) { + pr_debug("maps in %s: %d maps in %zd bytes\n", obj->path, + nr_maps, data->d_size); + + map_def_sz = data->d_size / nr_maps; + if (!data->d_size || (data->d_size % nr_maps) != 0) { + pr_warning("unable to determine map definition size " + "section %s, %d maps in %zd bytes\n", + obj->path, nr_maps, data->d_size); + return -EINVAL; + } } + nr_maps += nr_maps_glob; obj->maps = calloc(nr_maps, sizeof(obj->maps[0])); if (!obj->maps) { pr_warning("alloc maps for object failed\n"); @@ -697,7 +917,7 @@ bpf_object__init_maps(struct bpf_object *obj, int flags) /* * Fill obj->maps using data in "maps" section. */ - for (i = 0, map_idx = 0; i < symbols->d_size / sizeof(GElf_Sym); i++) { + for (i = 0, map_idx = 0; data && i < nr_syms; i++) { GElf_Sym sym; const char *map_name; struct bpf_map_def *def; @@ -710,6 +930,8 @@ bpf_object__init_maps(struct bpf_object *obj, int flags) map_name = elf_strptr(obj->efile.elf, obj->efile.strtabidx, sym.st_name); + + obj->maps[map_idx].libbpf_type = LIBBPF_MAP_UNSPEC; obj->maps[map_idx].offset = sym.st_value; if (sym.st_value + map_def_sz > data->d_size) { pr_warning("corrupted maps section in %s: last map \"%s\" too small\n", @@ -758,8 +980,31 @@ bpf_object__init_maps(struct bpf_object *obj, int flags) map_idx++; } - qsort(obj->maps, obj->nr_maps, sizeof(obj->maps[0]), compare_bpf_map); - return 0; + if (!obj->caps.global_data) + goto finalize; + + /* + * Populate rest of obj->maps with libbpf internal maps. + */ + if (obj->efile.data_shndx >= 0) + ret = bpf_object__init_internal_map(obj, &obj->maps[map_idx++], + LIBBPF_MAP_DATA, + obj->efile.data, + &obj->sections.data); + if (!ret && obj->efile.rodata_shndx >= 0) + ret = bpf_object__init_internal_map(obj, &obj->maps[map_idx++], + LIBBPF_MAP_RODATA, + obj->efile.rodata, + &obj->sections.rodata); + if (!ret && obj->efile.bss_shndx >= 0) + ret = bpf_object__init_internal_map(obj, &obj->maps[map_idx++], + LIBBPF_MAP_BSS, + obj->efile.bss, NULL); +finalize: + if (!ret) + qsort(obj->maps, obj->nr_maps, sizeof(obj->maps[0]), + compare_bpf_map); + return ret; } static bool section_have_execinstr(struct bpf_object *obj, int idx) @@ -780,11 +1025,80 @@ static bool section_have_execinstr(struct bpf_object *obj, int idx) return false; } +static void bpf_object__sanitize_btf(struct bpf_object *obj) +{ + bool has_datasec = obj->caps.btf_datasec; + bool has_func = obj->caps.btf_func; + struct btf *btf = obj->btf; + struct btf_type *t; + int i, j, vlen; + __u16 kind; + + if (!obj->btf || (has_func && has_datasec)) + return; + + for (i = 1; i <= btf__get_nr_types(btf); i++) { + t = (struct btf_type *)btf__type_by_id(btf, i); + kind = BTF_INFO_KIND(t->info); + + if (!has_datasec && kind == BTF_KIND_VAR) { + /* replace VAR with INT */ + t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); + t->size = sizeof(int); + *(int *)(t+1) = BTF_INT_ENC(0, 0, 32); + } else if (!has_datasec && kind == BTF_KIND_DATASEC) { + /* replace DATASEC with STRUCT */ + struct btf_var_secinfo *v = (void *)(t + 1); + struct btf_member *m = (void *)(t + 1); + struct btf_type *vt; + char *name; + + name = (char *)btf__name_by_offset(btf, t->name_off); + while (*name) { + if (*name == '.') + *name = '_'; + name++; + } + + vlen = BTF_INFO_VLEN(t->info); + t->info = BTF_INFO_ENC(BTF_KIND_STRUCT, 0, vlen); + for (j = 0; j < vlen; j++, v++, m++) { + /* order of field assignments is important */ + m->offset = v->offset * 8; + m->type = v->type; + /* preserve variable name as member name */ + vt = (void *)btf__type_by_id(btf, v->type); + m->name_off = vt->name_off; + } + } else if (!has_func && kind == BTF_KIND_FUNC_PROTO) { + /* replace FUNC_PROTO with ENUM */ + vlen = BTF_INFO_VLEN(t->info); + t->info = BTF_INFO_ENC(BTF_KIND_ENUM, 0, vlen); + t->size = sizeof(__u32); /* kernel enforced */ + } else if (!has_func && kind == BTF_KIND_FUNC) { + /* replace FUNC with TYPEDEF */ + t->info = BTF_INFO_ENC(BTF_KIND_TYPEDEF, 0, 0); + } + } +} + +static void bpf_object__sanitize_btf_ext(struct bpf_object *obj) +{ + if (!obj->btf_ext) + return; + + if (!obj->caps.btf_func) { + btf_ext__free(obj->btf_ext); + obj->btf_ext = NULL; + } +} + static int bpf_object__elf_collect(struct bpf_object *obj, int flags) { Elf *elf = obj->efile.elf; GElf_Ehdr *ep = &obj->efile.ehdr; Elf_Data *btf_ext_data = NULL; + Elf_Data *btf_data = NULL; Elf_Scn *scn = NULL; int idx = 0, err = 0; @@ -828,32 +1142,18 @@ static int bpf_object__elf_collect(struct bpf_object *obj, int flags) (int)sh.sh_link, (unsigned long)sh.sh_flags, (int)sh.sh_type); - if (strcmp(name, "license") == 0) + if (strcmp(name, "license") == 0) { err = bpf_object__init_license(obj, data->d_buf, data->d_size); - else if (strcmp(name, "version") == 0) + } else if (strcmp(name, "version") == 0) { err = bpf_object__init_kversion(obj, data->d_buf, data->d_size); - else if (strcmp(name, "maps") == 0) + } else if (strcmp(name, "maps") == 0) { obj->efile.maps_shndx = idx; - else if (strcmp(name, BTF_ELF_SEC) == 0) { - obj->btf = btf__new(data->d_buf, data->d_size); - if (IS_ERR(obj->btf)) { - pr_warning("Error loading ELF section %s: %ld. Ignored and continue.\n", - BTF_ELF_SEC, PTR_ERR(obj->btf)); - obj->btf = NULL; - continue; - } - err = btf__load(obj->btf); - if (err) { - pr_warning("Error loading %s into kernel: %d. Ignored and continue.\n", - BTF_ELF_SEC, err); - btf__free(obj->btf); - obj->btf = NULL; - err = 0; - } + } else if (strcmp(name, BTF_ELF_SEC) == 0) { + btf_data = data; } else if (strcmp(name, BTF_EXT_ELF_SEC) == 0) { btf_ext_data = data; } else if (sh.sh_type == SHT_SYMTAB) { @@ -865,20 +1165,28 @@ static int bpf_object__elf_collect(struct bpf_object *obj, int flags) obj->efile.symbols = data; obj->efile.strtabidx = sh.sh_link; } - } else if ((sh.sh_type == SHT_PROGBITS) && - (sh.sh_flags & SHF_EXECINSTR) && - (data->d_size > 0)) { - if (strcmp(name, ".text") == 0) - obj->efile.text_shndx = idx; - err = bpf_object__add_program(obj, data->d_buf, - data->d_size, name, idx); - if (err) { - char errmsg[STRERR_BUFSIZE]; - char *cp = libbpf_strerror_r(-err, errmsg, - sizeof(errmsg)); - - pr_warning("failed to alloc program %s (%s): %s", - name, obj->path, cp); + } else if (sh.sh_type == SHT_PROGBITS && data->d_size > 0) { + if (sh.sh_flags & SHF_EXECINSTR) { + if (strcmp(name, ".text") == 0) + obj->efile.text_shndx = idx; + err = bpf_object__add_program(obj, data->d_buf, + data->d_size, name, idx); + if (err) { + char errmsg[STRERR_BUFSIZE]; + char *cp = libbpf_strerror_r(-err, errmsg, + sizeof(errmsg)); + + pr_warning("failed to alloc program %s (%s): %s", + name, obj->path, cp); + } + } else if (strcmp(name, ".data") == 0) { + obj->efile.data = data; + obj->efile.data_shndx = idx; + } else if (strcmp(name, ".rodata") == 0) { + obj->efile.rodata = data; + obj->efile.rodata_shndx = idx; + } else { + pr_debug("skip section(%d) %s\n", idx, name); } } else if (sh.sh_type == SHT_REL) { void *reloc = obj->efile.reloc; @@ -906,6 +1214,9 @@ static int bpf_object__elf_collect(struct bpf_object *obj, int flags) obj->efile.reloc[n].shdr = sh; obj->efile.reloc[n].data = data; } + } else if (sh.sh_type == SHT_NOBITS && strcmp(name, ".bss") == 0) { + obj->efile.bss = data; + obj->efile.bss_shndx = idx; } else { pr_debug("skip section(%d) %s\n", idx, name); } @@ -917,6 +1228,27 @@ static int bpf_object__elf_collect(struct bpf_object *obj, int flags) pr_warning("Corrupted ELF file: index of strtab invalid\n"); return LIBBPF_ERRNO__FORMAT; } + if (btf_data) { + obj->btf = btf__new(btf_data->d_buf, btf_data->d_size); + if (IS_ERR(obj->btf)) { + pr_warning("Error loading ELF section %s: %ld. Ignored and continue.\n", + BTF_ELF_SEC, PTR_ERR(obj->btf)); + obj->btf = NULL; + } else { + err = btf__finalize_data(obj, obj->btf); + if (!err) { + bpf_object__sanitize_btf(obj); + err = btf__load(obj->btf); + } + if (err) { + pr_warning("Error finalizing and loading %s into kernel: %d. Ignored and continue.\n", + BTF_ELF_SEC, err); + btf__free(obj->btf); + obj->btf = NULL; + err = 0; + } + } + } if (btf_ext_data) { if (!obj->btf) { pr_debug("Ignore ELF section %s because its depending ELF section %s is not found.\n", @@ -929,10 +1261,12 @@ static int bpf_object__elf_collect(struct bpf_object *obj, int flags) BTF_EXT_ELF_SEC, PTR_ERR(obj->btf_ext)); obj->btf_ext = NULL; + } else { + bpf_object__sanitize_btf_ext(obj); } } } - if (obj->efile.maps_shndx >= 0) { + if (bpf_object__has_maps(obj)) { err = bpf_object__init_maps(obj, flags); if (err) goto out; @@ -968,13 +1302,46 @@ bpf_object__find_program_by_title(struct bpf_object *obj, const char *title) return NULL; } +static bool bpf_object__shndx_is_data(const struct bpf_object *obj, + int shndx) +{ + return shndx == obj->efile.data_shndx || + shndx == obj->efile.bss_shndx || + shndx == obj->efile.rodata_shndx; +} + +static bool bpf_object__shndx_is_maps(const struct bpf_object *obj, + int shndx) +{ + return shndx == obj->efile.maps_shndx; +} + +static bool bpf_object__relo_in_known_section(const struct bpf_object *obj, + int shndx) +{ + return shndx == obj->efile.text_shndx || + bpf_object__shndx_is_maps(obj, shndx) || + bpf_object__shndx_is_data(obj, shndx); +} + +static enum libbpf_map_type +bpf_object__section_to_libbpf_map_type(const struct bpf_object *obj, int shndx) +{ + if (shndx == obj->efile.data_shndx) + return LIBBPF_MAP_DATA; + else if (shndx == obj->efile.bss_shndx) + return LIBBPF_MAP_BSS; + else if (shndx == obj->efile.rodata_shndx) + return LIBBPF_MAP_RODATA; + else + return LIBBPF_MAP_UNSPEC; +} + static int bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr, Elf_Data *data, struct bpf_object *obj) { Elf_Data *symbols = obj->efile.symbols; - int text_shndx = obj->efile.text_shndx; - int maps_shndx = obj->efile.maps_shndx; struct bpf_map *maps = obj->maps; size_t nr_maps = obj->nr_maps; int i, nrels; @@ -994,7 +1361,10 @@ bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr, GElf_Sym sym; GElf_Rel rel; unsigned int insn_idx; + unsigned int shdr_idx; struct bpf_insn *insns = prog->insns; + enum libbpf_map_type type; + const char *name; size_t map_idx; if (!gelf_getrel(data, i, &rel)) { @@ -1009,13 +1379,18 @@ bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr, GELF_R_SYM(rel.r_info)); return -LIBBPF_ERRNO__FORMAT; } - pr_debug("relo for %lld value %lld name %d\n", + + name = elf_strptr(obj->efile.elf, obj->efile.strtabidx, + sym.st_name) ? : "<?>"; + + pr_debug("relo for %lld value %lld name %d (\'%s\')\n", (long long) (rel.r_info >> 32), - (long long) sym.st_value, sym.st_name); + (long long) sym.st_value, sym.st_name, name); - if (sym.st_shndx != maps_shndx && sym.st_shndx != text_shndx) { - pr_warning("Program '%s' contains non-map related relo data pointing to section %u\n", - prog->section_name, sym.st_shndx); + shdr_idx = sym.st_shndx; + if (!bpf_object__relo_in_known_section(obj, shdr_idx)) { + pr_warning("Program '%s' contains unrecognized relo data pointing to section %u\n", + prog->section_name, shdr_idx); return -LIBBPF_ERRNO__RELOC; } @@ -1040,24 +1415,45 @@ bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr, return -LIBBPF_ERRNO__RELOC; } - /* TODO: 'maps' is sorted. We can use bsearch to make it faster. */ - for (map_idx = 0; map_idx < nr_maps; map_idx++) { - if (maps[map_idx].offset == sym.st_value) { - pr_debug("relocation: find map %zd (%s) for insn %u\n", - map_idx, maps[map_idx].name, insn_idx); - break; + if (bpf_object__shndx_is_maps(obj, shdr_idx) || + bpf_object__shndx_is_data(obj, shdr_idx)) { + type = bpf_object__section_to_libbpf_map_type(obj, shdr_idx); + if (type != LIBBPF_MAP_UNSPEC) { + if (GELF_ST_BIND(sym.st_info) == STB_GLOBAL) { + pr_warning("bpf: relocation: not yet supported relo for non-static global \'%s\' variable found in insns[%d].code 0x%x\n", + name, insn_idx, insns[insn_idx].code); + return -LIBBPF_ERRNO__RELOC; + } + if (!obj->caps.global_data) { + pr_warning("bpf: relocation: kernel does not support global \'%s\' variable access in insns[%d]\n", + name, insn_idx); + return -LIBBPF_ERRNO__RELOC; + } } - } - if (map_idx >= nr_maps) { - pr_warning("bpf relocation: map_idx %d large than %d\n", - (int)map_idx, (int)nr_maps - 1); - return -LIBBPF_ERRNO__RELOC; - } + for (map_idx = 0; map_idx < nr_maps; map_idx++) { + if (maps[map_idx].libbpf_type != type) + continue; + if (type != LIBBPF_MAP_UNSPEC || + (type == LIBBPF_MAP_UNSPEC && + maps[map_idx].offset == sym.st_value)) { + pr_debug("relocation: find map %zd (%s) for insn %u\n", + map_idx, maps[map_idx].name, insn_idx); + break; + } + } - prog->reloc_desc[i].type = RELO_LD64; - prog->reloc_desc[i].insn_idx = insn_idx; - prog->reloc_desc[i].map_idx = map_idx; + if (map_idx >= nr_maps) { + pr_warning("bpf relocation: map_idx %d large than %d\n", + (int)map_idx, (int)nr_maps - 1); + return -LIBBPF_ERRNO__RELOC; + } + + prog->reloc_desc[i].type = type != LIBBPF_MAP_UNSPEC ? + RELO_DATA : RELO_LD64; + prog->reloc_desc[i].insn_idx = insn_idx; + prog->reloc_desc[i].map_idx = map_idx; + } } return 0; } @@ -1065,18 +1461,27 @@ bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr, static int bpf_map_find_btf_info(struct bpf_map *map, const struct btf *btf) { struct bpf_map_def *def = &map->def; - __u32 key_type_id, value_type_id; + __u32 key_type_id = 0, value_type_id = 0; int ret; - ret = btf__get_map_kv_tids(btf, map->name, def->key_size, - def->value_size, &key_type_id, - &value_type_id); - if (ret) + if (!bpf_map__is_internal(map)) { + ret = btf__get_map_kv_tids(btf, map->name, def->key_size, + def->value_size, &key_type_id, + &value_type_id); + } else { + /* + * LLVM annotates global data differently in BTF, that is, + * only as '.data', '.bss' or '.rodata'. + */ + ret = btf__find_by_name(btf, + libbpf_type_to_btf_name[map->libbpf_type]); + } + if (ret < 0) return ret; map->btf_key_type_id = key_type_id; - map->btf_value_type_id = value_type_id; - + map->btf_value_type_id = bpf_map__is_internal(map) ? + ret : value_type_id; return 0; } @@ -1182,9 +1587,146 @@ bpf_object__probe_name(struct bpf_object *obj) } static int +bpf_object__probe_global_data(struct bpf_object *obj) +{ + struct bpf_load_program_attr prg_attr; + struct bpf_create_map_attr map_attr; + char *cp, errmsg[STRERR_BUFSIZE]; + struct bpf_insn insns[] = { + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 16), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 0, 42), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }; + int ret, map; + + memset(&map_attr, 0, sizeof(map_attr)); + map_attr.map_type = BPF_MAP_TYPE_ARRAY; + map_attr.key_size = sizeof(int); + map_attr.value_size = 32; + map_attr.max_entries = 1; + + map = bpf_create_map_xattr(&map_attr); + if (map < 0) { + cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg)); + pr_warning("Error in %s():%s(%d). Couldn't create simple array map.\n", + __func__, cp, errno); + return -errno; + } + + insns[0].imm = map; + + memset(&prg_attr, 0, sizeof(prg_attr)); + prg_attr.prog_type = BPF_PROG_TYPE_SOCKET_FILTER; + prg_attr.insns = insns; + prg_attr.insns_cnt = ARRAY_SIZE(insns); + prg_attr.license = "GPL"; + + ret = bpf_load_program_xattr(&prg_attr, NULL, 0); + if (ret >= 0) { + obj->caps.global_data = 1; + close(ret); + } + + close(map); + return 0; +} + +static int bpf_object__probe_btf_func(struct bpf_object *obj) +{ + const char strs[] = "\0int\0x\0a"; + /* void x(int a) {} */ + __u32 types[] = { + /* int */ + BTF_TYPE_INT_ENC(1, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* FUNC_PROTO */ /* [2] */ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_FUNC_PROTO, 0, 1), 0), + BTF_PARAM_ENC(7, 1), + /* FUNC x */ /* [3] */ + BTF_TYPE_ENC(5, BTF_INFO_ENC(BTF_KIND_FUNC, 0, 0), 2), + }; + int res; + + res = libbpf__probe_raw_btf((char *)types, sizeof(types), + strs, sizeof(strs)); + if (res < 0) + return res; + if (res > 0) + obj->caps.btf_func = 1; + return 0; +} + +static int bpf_object__probe_btf_datasec(struct bpf_object *obj) +{ + const char strs[] = "\0x\0.data"; + /* static int a; */ + __u32 types[] = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* VAR x */ /* [2] */ + BTF_TYPE_ENC(1, BTF_INFO_ENC(BTF_KIND_VAR, 0, 0), 1), + BTF_VAR_STATIC, + /* DATASEC val */ /* [3] */ + BTF_TYPE_ENC(3, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(2, 0, 4), + }; + int res; + + res = libbpf__probe_raw_btf((char *)types, sizeof(types), + strs, sizeof(strs)); + if (res < 0) + return res; + if (res > 0) + obj->caps.btf_datasec = 1; + return 0; +} + +static int bpf_object__probe_caps(struct bpf_object *obj) { - return bpf_object__probe_name(obj); + int (*probe_fn[])(struct bpf_object *obj) = { + bpf_object__probe_name, + bpf_object__probe_global_data, + bpf_object__probe_btf_func, + bpf_object__probe_btf_datasec, + }; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(probe_fn); i++) { + ret = probe_fn[i](obj); + if (ret < 0) + pr_debug("Probe #%d failed with %d.\n", i, ret); + } + + return 0; +} + +static int +bpf_object__populate_internal_map(struct bpf_object *obj, struct bpf_map *map) +{ + char *cp, errmsg[STRERR_BUFSIZE]; + int err, zero = 0; + __u8 *data; + + /* Nothing to do here since kernel already zero-initializes .bss map. */ + if (map->libbpf_type == LIBBPF_MAP_BSS) + return 0; + + data = map->libbpf_type == LIBBPF_MAP_DATA ? + obj->sections.data : obj->sections.rodata; + + err = bpf_map_update_elem(map->fd, &zero, data, 0); + /* Freeze .rodata map as read-only from syscall side. */ + if (!err && map->libbpf_type == LIBBPF_MAP_RODATA) { + err = bpf_map_freeze(map->fd); + if (err) { + cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg)); + pr_warning("Error freezing map(%s) as read-only: %s\n", + map->name, cp); + err = 0; + } + } + return err; } static int @@ -1244,6 +1786,7 @@ bpf_object__create_maps(struct bpf_object *obj) size_t j; err = *pfd; +err_out: cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg)); pr_warning("failed to create map (name: '%s'): %s\n", map->name, cp); @@ -1251,6 +1794,15 @@ bpf_object__create_maps(struct bpf_object *obj) zclose(obj->maps[j].fd); return err; } + + if (bpf_map__is_internal(map)) { + err = bpf_object__populate_internal_map(obj, map); + if (err < 0) { + zclose(*pfd); + goto err_out; + } + } + pr_debug("create map %s: fd=%d\n", map->name, *pfd); } @@ -1405,21 +1957,29 @@ bpf_program__relocate(struct bpf_program *prog, struct bpf_object *obj) return 0; for (i = 0; i < prog->nr_reloc; i++) { - if (prog->reloc_desc[i].type == RELO_LD64) { + if (prog->reloc_desc[i].type == RELO_LD64 || + prog->reloc_desc[i].type == RELO_DATA) { + bool relo_data = prog->reloc_desc[i].type == RELO_DATA; struct bpf_insn *insns = prog->insns; int insn_idx, map_idx; insn_idx = prog->reloc_desc[i].insn_idx; map_idx = prog->reloc_desc[i].map_idx; - if (insn_idx >= (int)prog->insns_cnt) { + if (insn_idx + 1 >= (int)prog->insns_cnt) { pr_warning("relocation out of range: '%s'\n", prog->section_name); return -LIBBPF_ERRNO__RELOC; } - insns[insn_idx].src_reg = BPF_PSEUDO_MAP_FD; + + if (!relo_data) { + insns[insn_idx].src_reg = BPF_PSEUDO_MAP_FD; + } else { + insns[insn_idx].src_reg = BPF_PSEUDO_MAP_VALUE; + insns[insn_idx + 1].imm = insns[insn_idx].imm; + } insns[insn_idx].imm = obj->maps[map_idx].fd; - } else { + } else if (prog->reloc_desc[i].type == RELO_CALL) { err = bpf_program__reloc_text(prog, obj, &prog->reloc_desc[i]); if (err) @@ -1494,6 +2054,7 @@ load_program(struct bpf_program *prog, struct bpf_insn *insns, int insns_cnt, { struct bpf_load_program_attr load_attr; char *cp, errmsg[STRERR_BUFSIZE]; + int log_buf_size = BPF_LOG_BUF_SIZE; char *log_buf; int ret; @@ -1514,21 +2075,30 @@ load_program(struct bpf_program *prog, struct bpf_insn *insns, int insns_cnt, load_attr.line_info = prog->line_info; load_attr.line_info_rec_size = prog->line_info_rec_size; load_attr.line_info_cnt = prog->line_info_cnt; + load_attr.log_level = prog->log_level; if (!load_attr.insns || !load_attr.insns_cnt) return -EINVAL; - log_buf = malloc(BPF_LOG_BUF_SIZE); +retry_load: + log_buf = malloc(log_buf_size); if (!log_buf) pr_warning("Alloc log buffer for bpf loader error, continue without log\n"); - ret = bpf_load_program_xattr(&load_attr, log_buf, BPF_LOG_BUF_SIZE); + ret = bpf_load_program_xattr(&load_attr, log_buf, log_buf_size); if (ret >= 0) { + if (load_attr.log_level) + pr_debug("verifier log:\n%s", log_buf); *pfd = ret; ret = 0; goto out; } + if (errno == ENOSPC) { + log_buf_size <<= 1; + free(log_buf); + goto retry_load; + } ret = -LIBBPF_ERRNO__LOAD; cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg)); pr_warning("load bpf program failed: %s\n", cp); @@ -1693,7 +2263,9 @@ static bool bpf_prog_type__needs_kver(enum bpf_prog_type type) case BPF_PROG_TYPE_UNSPEC: case BPF_PROG_TYPE_TRACEPOINT: case BPF_PROG_TYPE_RAW_TRACEPOINT: + case BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE: case BPF_PROG_TYPE_PERF_EVENT: + case BPF_PROG_TYPE_CGROUP_SYSCTL: return false; case BPF_PROG_TYPE_KPROBE: default: @@ -1729,6 +2301,7 @@ __bpf_object__open(const char *path, void *obj_buf, size_t obj_buf_sz, CHECK_ERR(bpf_object__elf_init(obj), err, out); CHECK_ERR(bpf_object__check_endianness(obj), err, out); + CHECK_ERR(bpf_object__probe_caps(obj), err, out); CHECK_ERR(bpf_object__elf_collect(obj, flags), err, out); CHECK_ERR(bpf_object__collect_reloc(obj), err, out); CHECK_ERR(bpf_object__validate(obj, needs_kver), err, out); @@ -1822,7 +2395,6 @@ int bpf_object__load(struct bpf_object *obj) obj->loaded = true; - CHECK_ERR(bpf_object__probe_caps(obj), err, out); CHECK_ERR(bpf_object__create_maps(obj), err, out); CHECK_ERR(bpf_object__relocate(obj), err, out); CHECK_ERR(bpf_object__load_progs(obj), err, out); @@ -2303,6 +2875,9 @@ void bpf_object__close(struct bpf_object *obj) obj->maps[i].priv = NULL; obj->maps[i].clear_priv = NULL; } + + zfree(&obj->sections.rodata); + zfree(&obj->sections.data); zfree(&obj->maps); obj->nr_maps = 0; @@ -2631,6 +3206,8 @@ static const struct { BPF_CGROUP_UDP4_SENDMSG), BPF_EAPROG_SEC("cgroup/sendmsg6", BPF_PROG_TYPE_CGROUP_SOCK_ADDR, BPF_CGROUP_UDP6_SENDMSG), + BPF_EAPROG_SEC("cgroup/sysctl", BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_CGROUP_SYSCTL), }; #undef BPF_PROG_SEC_IMPL @@ -2780,6 +3357,11 @@ bool bpf_map__is_offload_neutral(struct bpf_map *map) return map->def.type == BPF_MAP_TYPE_PERF_EVENT_ARRAY; } +bool bpf_map__is_internal(struct bpf_map *map) +{ + return map->libbpf_type != LIBBPF_MAP_UNSPEC; +} + void bpf_map__set_ifindex(struct bpf_map *map, __u32 ifindex) { map->map_ifindex = ifindex; @@ -2938,6 +3520,7 @@ int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr, bpf_program__set_expected_attach_type(prog, expected_attach_type); + prog->log_level = attr->log_level; if (!first_prog) first_prog = prog; } diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h index c70785cc8ef5..c5ff00515ce7 100644 --- a/tools/lib/bpf/libbpf.h +++ b/tools/lib/bpf/libbpf.h @@ -75,6 +75,10 @@ struct bpf_object *__bpf_object__open_xattr(struct bpf_object_open_attr *attr, LIBBPF_API struct bpf_object *bpf_object__open_buffer(void *obj_buf, size_t obj_buf_sz, const char *name); +int bpf_object__section_size(const struct bpf_object *obj, const char *name, + __u32 *size); +int bpf_object__variable_offset(const struct bpf_object *obj, const char *name, + __u32 *off); LIBBPF_API int bpf_object__pin_maps(struct bpf_object *obj, const char *path); LIBBPF_API int bpf_object__unpin_maps(struct bpf_object *obj, const char *path); @@ -301,6 +305,7 @@ LIBBPF_API void *bpf_map__priv(struct bpf_map *map); LIBBPF_API int bpf_map__reuse_fd(struct bpf_map *map, int fd); LIBBPF_API int bpf_map__resize(struct bpf_map *map, __u32 max_entries); LIBBPF_API bool bpf_map__is_offload_neutral(struct bpf_map *map); +LIBBPF_API bool bpf_map__is_internal(struct bpf_map *map); LIBBPF_API void bpf_map__set_ifindex(struct bpf_map *map, __u32 ifindex); LIBBPF_API int bpf_map__pin(struct bpf_map *map, const char *path); LIBBPF_API int bpf_map__unpin(struct bpf_map *map, const char *path); @@ -314,6 +319,7 @@ struct bpf_prog_load_attr { enum bpf_prog_type prog_type; enum bpf_attach_type expected_attach_type; int ifindex; + int log_level; }; LIBBPF_API int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr, diff --git a/tools/lib/bpf/libbpf.map b/tools/lib/bpf/libbpf.map index f3ce50500cf2..673001787cba 100644 --- a/tools/lib/bpf/libbpf.map +++ b/tools/lib/bpf/libbpf.map @@ -157,3 +157,10 @@ LIBBPF_0.0.2 { bpf_program__bpil_addr_to_offs; bpf_program__bpil_offs_to_addr; } LIBBPF_0.0.1; + +LIBBPF_0.0.3 { + global: + bpf_map__is_internal; + bpf_map_freeze; + btf__finalize_data; +} LIBBPF_0.0.2; diff --git a/tools/lib/bpf/libbpf.pc.template b/tools/lib/bpf/libbpf.pc.template new file mode 100644 index 000000000000..ac17fcef2108 --- /dev/null +++ b/tools/lib/bpf/libbpf.pc.template @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +prefix=@PREFIX@ +libdir=@LIBDIR@ +includedir=${prefix}/include + +Name: libbpf +Description: BPF library +Version: @VERSION@ +Libs: -L${libdir} -lbpf +Requires.private: libelf +Cflags: -I${includedir} diff --git a/tools/lib/bpf/libbpf_internal.h b/tools/lib/bpf/libbpf_internal.h new file mode 100644 index 000000000000..f3025b4d90e1 --- /dev/null +++ b/tools/lib/bpf/libbpf_internal.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ + +/* + * Internal libbpf helpers. + * + * Copyright (c) 2019 Facebook + */ + +#ifndef __LIBBPF_LIBBPF_INTERNAL_H +#define __LIBBPF_LIBBPF_INTERNAL_H + +#define BTF_INFO_ENC(kind, kind_flag, vlen) \ + ((!!(kind_flag) << 31) | ((kind) << 24) | ((vlen) & BTF_MAX_VLEN)) +#define BTF_TYPE_ENC(name, info, size_or_type) (name), (info), (size_or_type) +#define BTF_INT_ENC(encoding, bits_offset, nr_bits) \ + ((encoding) << 24 | (bits_offset) << 16 | (nr_bits)) +#define BTF_TYPE_INT_ENC(name, encoding, bits_offset, bits, sz) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_INT, 0, 0), sz), \ + BTF_INT_ENC(encoding, bits_offset, bits) +#define BTF_MEMBER_ENC(name, type, bits_offset) (name), (type), (bits_offset) +#define BTF_PARAM_ENC(name, type) (name), (type) +#define BTF_VAR_SECINFO_ENC(type, offset, size) (type), (offset), (size) + +extern void libbpf_print(enum libbpf_print_level level, + const char *format, ...) + __attribute__((format(printf, 2, 3))); + +#define __pr(level, fmt, ...) \ +do { \ + libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \ +} while (0) + +#define pr_warning(fmt, ...) __pr(LIBBPF_WARN, fmt, ##__VA_ARGS__) +#define pr_info(fmt, ...) __pr(LIBBPF_INFO, fmt, ##__VA_ARGS__) +#define pr_debug(fmt, ...) __pr(LIBBPF_DEBUG, fmt, ##__VA_ARGS__) + +int libbpf__probe_raw_btf(const char *raw_types, size_t types_len, + const char *str_sec, size_t str_len); + +#endif /* __LIBBPF_LIBBPF_INTERNAL_H */ diff --git a/tools/lib/bpf/libbpf_probes.c b/tools/lib/bpf/libbpf_probes.c index 8c3a1c04dcb2..5e2aa83f637a 100644 --- a/tools/lib/bpf/libbpf_probes.c +++ b/tools/lib/bpf/libbpf_probes.c @@ -9,11 +9,13 @@ #include <net/if.h> #include <sys/utsname.h> +#include <linux/btf.h> #include <linux/filter.h> #include <linux/kernel.h> #include "bpf.h" #include "libbpf.h" +#include "libbpf_internal.h" static bool grep(const char *buffer, const char *pattern) { @@ -93,10 +95,12 @@ probe_load(enum bpf_prog_type prog_type, const struct bpf_insn *insns, case BPF_PROG_TYPE_CGROUP_DEVICE: case BPF_PROG_TYPE_SK_MSG: case BPF_PROG_TYPE_RAW_TRACEPOINT: + case BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE: case BPF_PROG_TYPE_LWT_SEG6LOCAL: case BPF_PROG_TYPE_LIRC_MODE2: case BPF_PROG_TYPE_SK_REUSEPORT: case BPF_PROG_TYPE_FLOW_DISSECTOR: + case BPF_PROG_TYPE_CGROUP_SYSCTL: default: break; } @@ -129,11 +133,73 @@ bool bpf_probe_prog_type(enum bpf_prog_type prog_type, __u32 ifindex) return errno != EINVAL && errno != EOPNOTSUPP; } +int libbpf__probe_raw_btf(const char *raw_types, size_t types_len, + const char *str_sec, size_t str_len) +{ + struct btf_header hdr = { + .magic = BTF_MAGIC, + .version = BTF_VERSION, + .hdr_len = sizeof(struct btf_header), + .type_len = types_len, + .str_off = types_len, + .str_len = str_len, + }; + int btf_fd, btf_len; + __u8 *raw_btf; + + btf_len = hdr.hdr_len + hdr.type_len + hdr.str_len; + raw_btf = malloc(btf_len); + if (!raw_btf) + return -ENOMEM; + + memcpy(raw_btf, &hdr, sizeof(hdr)); + memcpy(raw_btf + hdr.hdr_len, raw_types, hdr.type_len); + memcpy(raw_btf + hdr.hdr_len + hdr.type_len, str_sec, hdr.str_len); + + btf_fd = bpf_load_btf(raw_btf, btf_len, NULL, 0, false); + if (btf_fd < 0) { + free(raw_btf); + return 0; + } + + close(btf_fd); + free(raw_btf); + return 1; +} + +static int load_sk_storage_btf(void) +{ + const char strs[] = "\0bpf_spin_lock\0val\0cnt\0l"; + /* struct bpf_spin_lock { + * int val; + * }; + * struct val { + * int cnt; + * struct bpf_spin_lock l; + * }; + */ + __u32 types[] = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* struct bpf_spin_lock */ /* [2] */ + BTF_TYPE_ENC(1, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4), + BTF_MEMBER_ENC(15, 1, 0), /* int val; */ + /* struct val */ /* [3] */ + BTF_TYPE_ENC(15, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 2), 8), + BTF_MEMBER_ENC(19, 1, 0), /* int cnt; */ + BTF_MEMBER_ENC(23, 2, 32),/* struct bpf_spin_lock l; */ + }; + + return libbpf__probe_raw_btf((char *)types, sizeof(types), + strs, sizeof(strs)); +} + bool bpf_probe_map_type(enum bpf_map_type map_type, __u32 ifindex) { int key_size, value_size, max_entries, map_flags; + __u32 btf_key_type_id = 0, btf_value_type_id = 0; struct bpf_create_map_attr attr = {}; - int fd = -1, fd_inner; + int fd = -1, btf_fd = -1, fd_inner; key_size = sizeof(__u32); value_size = sizeof(__u32); @@ -159,6 +225,16 @@ bool bpf_probe_map_type(enum bpf_map_type map_type, __u32 ifindex) case BPF_MAP_TYPE_STACK: key_size = 0; break; + case BPF_MAP_TYPE_SK_STORAGE: + btf_key_type_id = 1; + btf_value_type_id = 3; + value_size = 8; + max_entries = 0; + map_flags = BPF_F_NO_PREALLOC; + btf_fd = load_sk_storage_btf(); + if (btf_fd < 0) + return false; + break; case BPF_MAP_TYPE_UNSPEC: case BPF_MAP_TYPE_HASH: case BPF_MAP_TYPE_ARRAY: @@ -204,11 +280,18 @@ bool bpf_probe_map_type(enum bpf_map_type map_type, __u32 ifindex) attr.max_entries = max_entries; attr.map_flags = map_flags; attr.map_ifindex = ifindex; + if (btf_fd >= 0) { + attr.btf_fd = btf_fd; + attr.btf_key_type_id = btf_key_type_id; + attr.btf_value_type_id = btf_value_type_id; + } fd = bpf_create_map_xattr(&attr); } if (fd >= 0) close(fd); + if (btf_fd >= 0) + close(btf_fd); return fd >= 0; } diff --git a/tools/lib/bpf/libbpf_util.h b/tools/lib/bpf/libbpf_util.h index 81ecda0cb9c9..59c779c5790c 100644 --- a/tools/lib/bpf/libbpf_util.h +++ b/tools/lib/bpf/libbpf_util.h @@ -10,18 +10,35 @@ extern "C" { #endif -extern void libbpf_print(enum libbpf_print_level level, - const char *format, ...) - __attribute__((format(printf, 2, 3))); - -#define __pr(level, fmt, ...) \ -do { \ - libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \ -} while (0) - -#define pr_warning(fmt, ...) __pr(LIBBPF_WARN, fmt, ##__VA_ARGS__) -#define pr_info(fmt, ...) __pr(LIBBPF_INFO, fmt, ##__VA_ARGS__) -#define pr_debug(fmt, ...) __pr(LIBBPF_DEBUG, fmt, ##__VA_ARGS__) +/* Use these barrier functions instead of smp_[rw]mb() when they are + * used in a libbpf header file. That way they can be built into the + * application that uses libbpf. + */ +#if defined(__i386__) || defined(__x86_64__) +# define libbpf_smp_rmb() asm volatile("" : : : "memory") +# define libbpf_smp_wmb() asm volatile("" : : : "memory") +# define libbpf_smp_mb() \ + asm volatile("lock; addl $0,-4(%%rsp)" : : : "memory", "cc") +/* Hinders stores to be observed before older loads. */ +# define libbpf_smp_rwmb() asm volatile("" : : : "memory") +#elif defined(__aarch64__) +# define libbpf_smp_rmb() asm volatile("dmb ishld" : : : "memory") +# define libbpf_smp_wmb() asm volatile("dmb ishst" : : : "memory") +# define libbpf_smp_mb() asm volatile("dmb ish" : : : "memory") +# define libbpf_smp_rwmb() libbpf_smp_mb() +#elif defined(__arm__) +/* These are only valid for armv7 and above */ +# define libbpf_smp_rmb() asm volatile("dmb ish" : : : "memory") +# define libbpf_smp_wmb() asm volatile("dmb ishst" : : : "memory") +# define libbpf_smp_mb() asm volatile("dmb ish" : : : "memory") +# define libbpf_smp_rwmb() libbpf_smp_mb() +#else +/* Architecture missing native barrier functions. */ +# define libbpf_smp_rmb() __sync_synchronize() +# define libbpf_smp_wmb() __sync_synchronize() +# define libbpf_smp_mb() __sync_synchronize() +# define libbpf_smp_rwmb() __sync_synchronize() +#endif #ifdef __cplusplus } /* extern "C" */ diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c index 8d0078b65486..38667b62f1fe 100644 --- a/tools/lib/bpf/xsk.c +++ b/tools/lib/bpf/xsk.c @@ -29,7 +29,7 @@ #include "bpf.h" #include "libbpf.h" -#include "libbpf_util.h" +#include "libbpf_internal.h" #include "xsk.h" #ifndef SOL_XDP @@ -248,8 +248,7 @@ int xsk_umem__create(struct xsk_umem **umem_ptr, void *umem_area, __u64 size, return 0; out_mmap: - munmap(umem->fill, - off.fr.desc + umem->config.fill_size * sizeof(__u64)); + munmap(map, off.fr.desc + umem->config.fill_size * sizeof(__u64)); out_socket: close(umem->fd); out_umem_alloc: @@ -259,7 +258,8 @@ out_umem_alloc: static int xsk_load_xdp_prog(struct xsk_socket *xsk) { - char bpf_log_buf[BPF_LOG_BUF_SIZE]; + static const int log_buf_size = 16 * 1024; + char log_buf[log_buf_size]; int err, prog_fd; /* This is the C-program: @@ -308,10 +308,10 @@ static int xsk_load_xdp_prog(struct xsk_socket *xsk) size_t insns_cnt = sizeof(prog) / sizeof(struct bpf_insn); prog_fd = bpf_load_program(BPF_PROG_TYPE_XDP, prog, insns_cnt, - "LGPL-2.1 or BSD-2-Clause", 0, bpf_log_buf, - BPF_LOG_BUF_SIZE); + "LGPL-2.1 or BSD-2-Clause", 0, log_buf, + log_buf_size); if (prog_fd < 0) { - pr_warning("BPF log buffer:\n%s", bpf_log_buf); + pr_warning("BPF log buffer:\n%s", log_buf); return prog_fd; } @@ -387,21 +387,17 @@ static void xsk_delete_bpf_maps(struct xsk_socket *xsk) { close(xsk->qidconf_map_fd); close(xsk->xsks_map_fd); + xsk->qidconf_map_fd = -1; + xsk->xsks_map_fd = -1; } -static int xsk_update_bpf_maps(struct xsk_socket *xsk, int qidconf_value, - int xsks_value) +static int xsk_lookup_bpf_maps(struct xsk_socket *xsk) { - bool qidconf_map_updated = false, xsks_map_updated = false; + __u32 i, *map_ids, num_maps, prog_len = sizeof(struct bpf_prog_info); + __u32 map_len = sizeof(struct bpf_map_info); struct bpf_prog_info prog_info = {}; - __u32 prog_len = sizeof(prog_info); struct bpf_map_info map_info; - __u32 map_len = sizeof(map_info); - __u32 *map_ids; - int reset_value = 0; - __u32 num_maps; - unsigned int i; - int err; + int fd, err; err = bpf_obj_get_info_by_fd(xsk->prog_fd, &prog_info, &prog_len); if (err) @@ -422,66 +418,71 @@ static int xsk_update_bpf_maps(struct xsk_socket *xsk, int qidconf_value, goto out_map_ids; for (i = 0; i < prog_info.nr_map_ids; i++) { - int fd; + if (xsk->qidconf_map_fd != -1 && xsk->xsks_map_fd != -1) + break; fd = bpf_map_get_fd_by_id(map_ids[i]); - if (fd < 0) { - err = -errno; - goto out_maps; - } + if (fd < 0) + continue; err = bpf_obj_get_info_by_fd(fd, &map_info, &map_len); - if (err) - goto out_maps; + if (err) { + close(fd); + continue; + } if (!strcmp(map_info.name, "qidconf_map")) { - err = bpf_map_update_elem(fd, &xsk->queue_id, - &qidconf_value, 0); - if (err) - goto out_maps; - qidconf_map_updated = true; xsk->qidconf_map_fd = fd; - } else if (!strcmp(map_info.name, "xsks_map")) { - err = bpf_map_update_elem(fd, &xsk->queue_id, - &xsks_value, 0); - if (err) - goto out_maps; - xsks_map_updated = true; + continue; + } + + if (!strcmp(map_info.name, "xsks_map")) { xsk->xsks_map_fd = fd; + continue; } - if (qidconf_map_updated && xsks_map_updated) - break; + close(fd); } - if (!(qidconf_map_updated && xsks_map_updated)) { + err = 0; + if (xsk->qidconf_map_fd < 0 || xsk->xsks_map_fd < 0) { err = -ENOENT; - goto out_maps; + xsk_delete_bpf_maps(xsk); } - err = 0; - goto out_success; - -out_maps: - if (qidconf_map_updated) - (void)bpf_map_update_elem(xsk->qidconf_map_fd, &xsk->queue_id, - &reset_value, 0); - if (xsks_map_updated) - (void)bpf_map_update_elem(xsk->xsks_map_fd, &xsk->queue_id, - &reset_value, 0); -out_success: - if (qidconf_map_updated) - close(xsk->qidconf_map_fd); - if (xsks_map_updated) - close(xsk->xsks_map_fd); out_map_ids: free(map_ids); return err; } +static void xsk_clear_bpf_maps(struct xsk_socket *xsk) +{ + int qid = false; + + bpf_map_update_elem(xsk->qidconf_map_fd, &xsk->queue_id, &qid, 0); + bpf_map_delete_elem(xsk->xsks_map_fd, &xsk->queue_id); +} + +static int xsk_set_bpf_maps(struct xsk_socket *xsk) +{ + int qid = true, fd = xsk->fd, err; + + err = bpf_map_update_elem(xsk->qidconf_map_fd, &xsk->queue_id, &qid, 0); + if (err) + goto out; + + err = bpf_map_update_elem(xsk->xsks_map_fd, &xsk->queue_id, &fd, 0); + if (err) + goto out; + + return 0; +out: + xsk_clear_bpf_maps(xsk); + return err; +} + static int xsk_setup_xdp_prog(struct xsk_socket *xsk) { - bool prog_attached = false; __u32 prog_id = 0; int err; @@ -491,7 +492,6 @@ static int xsk_setup_xdp_prog(struct xsk_socket *xsk) return err; if (!prog_id) { - prog_attached = true; err = xsk_create_bpf_maps(xsk); if (err) return err; @@ -501,20 +501,21 @@ static int xsk_setup_xdp_prog(struct xsk_socket *xsk) goto out_maps; } else { xsk->prog_fd = bpf_prog_get_fd_by_id(prog_id); + err = xsk_lookup_bpf_maps(xsk); + if (err) + goto out_load; } - err = xsk_update_bpf_maps(xsk, true, xsk->fd); + err = xsk_set_bpf_maps(xsk); if (err) goto out_load; return 0; out_load: - if (prog_attached) - close(xsk->prog_fd); + close(xsk->prog_fd); out_maps: - if (prog_attached) - xsk_delete_bpf_maps(xsk); + xsk_delete_bpf_maps(xsk); return err; } @@ -523,11 +524,11 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname, struct xsk_ring_cons *rx, struct xsk_ring_prod *tx, const struct xsk_socket_config *usr_config) { + void *rx_map = NULL, *tx_map = NULL; struct sockaddr_xdp sxdp = {}; struct xdp_mmap_offsets off; struct xsk_socket *xsk; socklen_t optlen; - void *map; int err; if (!umem || !xsk_ptr || !rx || !tx) @@ -593,40 +594,40 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname, } if (rx) { - map = xsk_mmap(NULL, off.rx.desc + - xsk->config.rx_size * sizeof(struct xdp_desc), - PROT_READ | PROT_WRITE, - MAP_SHARED | MAP_POPULATE, - xsk->fd, XDP_PGOFF_RX_RING); - if (map == MAP_FAILED) { + rx_map = xsk_mmap(NULL, off.rx.desc + + xsk->config.rx_size * sizeof(struct xdp_desc), + PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_POPULATE, + xsk->fd, XDP_PGOFF_RX_RING); + if (rx_map == MAP_FAILED) { err = -errno; goto out_socket; } rx->mask = xsk->config.rx_size - 1; rx->size = xsk->config.rx_size; - rx->producer = map + off.rx.producer; - rx->consumer = map + off.rx.consumer; - rx->ring = map + off.rx.desc; + rx->producer = rx_map + off.rx.producer; + rx->consumer = rx_map + off.rx.consumer; + rx->ring = rx_map + off.rx.desc; } xsk->rx = rx; if (tx) { - map = xsk_mmap(NULL, off.tx.desc + - xsk->config.tx_size * sizeof(struct xdp_desc), - PROT_READ | PROT_WRITE, - MAP_SHARED | MAP_POPULATE, - xsk->fd, XDP_PGOFF_TX_RING); - if (map == MAP_FAILED) { + tx_map = xsk_mmap(NULL, off.tx.desc + + xsk->config.tx_size * sizeof(struct xdp_desc), + PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_POPULATE, + xsk->fd, XDP_PGOFF_TX_RING); + if (tx_map == MAP_FAILED) { err = -errno; goto out_mmap_rx; } tx->mask = xsk->config.tx_size - 1; tx->size = xsk->config.tx_size; - tx->producer = map + off.tx.producer; - tx->consumer = map + off.tx.consumer; - tx->ring = map + off.tx.desc; + tx->producer = tx_map + off.tx.producer; + tx->consumer = tx_map + off.tx.consumer; + tx->ring = tx_map + off.tx.desc; tx->cached_cons = xsk->config.tx_size; } xsk->tx = tx; @@ -642,6 +643,9 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname, goto out_mmap_tx; } + xsk->qidconf_map_fd = -1; + xsk->xsks_map_fd = -1; + if (!(xsk->config.libbpf_flags & XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD)) { err = xsk_setup_xdp_prog(xsk); if (err) @@ -653,13 +657,11 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname, out_mmap_tx: if (tx) - munmap(xsk->tx, - off.tx.desc + + munmap(tx_map, off.tx.desc + xsk->config.tx_size * sizeof(struct xdp_desc)); out_mmap_rx: if (rx) - munmap(xsk->rx, - off.rx.desc + + munmap(rx_map, off.rx.desc + xsk->config.rx_size * sizeof(struct xdp_desc)); out_socket: if (--umem->refcount) @@ -684,9 +686,9 @@ int xsk_umem__delete(struct xsk_umem *umem) optlen = sizeof(off); err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen); if (!err) { - munmap(umem->fill->ring, + munmap(umem->fill->ring - off.fr.desc, off.fr.desc + umem->config.fill_size * sizeof(__u64)); - munmap(umem->comp->ring, + munmap(umem->comp->ring - off.cr.desc, off.cr.desc + umem->config.comp_size * sizeof(__u64)); } @@ -698,6 +700,7 @@ int xsk_umem__delete(struct xsk_umem *umem) void xsk_socket__delete(struct xsk_socket *xsk) { + size_t desc_sz = sizeof(struct xdp_desc); struct xdp_mmap_offsets off; socklen_t optlen; int err; @@ -705,19 +708,21 @@ void xsk_socket__delete(struct xsk_socket *xsk) if (!xsk) return; - (void)xsk_update_bpf_maps(xsk, 0, 0); + xsk_clear_bpf_maps(xsk); + xsk_delete_bpf_maps(xsk); optlen = sizeof(off); err = getsockopt(xsk->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen); if (!err) { - if (xsk->rx) - munmap(xsk->rx->ring, - off.rx.desc + - xsk->config.rx_size * sizeof(struct xdp_desc)); - if (xsk->tx) - munmap(xsk->tx->ring, - off.tx.desc + - xsk->config.tx_size * sizeof(struct xdp_desc)); + if (xsk->rx) { + munmap(xsk->rx->ring - off.rx.desc, + off.rx.desc + xsk->config.rx_size * desc_sz); + } + if (xsk->tx) { + munmap(xsk->tx->ring - off.tx.desc, + off.tx.desc + xsk->config.tx_size * desc_sz); + } + } xsk->umem->refcount--; diff --git a/tools/lib/bpf/xsk.h b/tools/lib/bpf/xsk.h index a497f00e2962..82ea71a0f3ec 100644 --- a/tools/lib/bpf/xsk.h +++ b/tools/lib/bpf/xsk.h @@ -16,6 +16,7 @@ #include <linux/if_xdp.h> #include "libbpf.h" +#include "libbpf_util.h" #ifdef __cplusplus extern "C" { @@ -36,6 +37,10 @@ struct name { \ DEFINE_XSK_RING(xsk_ring_prod); DEFINE_XSK_RING(xsk_ring_cons); +/* For a detailed explanation on the memory barriers associated with the + * ring, please take a look at net/xdp/xsk_queue.h. + */ + struct xsk_umem; struct xsk_socket; @@ -105,7 +110,7 @@ static inline __u32 xsk_cons_nb_avail(struct xsk_ring_cons *r, __u32 nb) static inline size_t xsk_ring_prod__reserve(struct xsk_ring_prod *prod, size_t nb, __u32 *idx) { - if (unlikely(xsk_prod_nb_free(prod, nb) < nb)) + if (xsk_prod_nb_free(prod, nb) < nb) return 0; *idx = prod->cached_prod; @@ -116,10 +121,10 @@ static inline size_t xsk_ring_prod__reserve(struct xsk_ring_prod *prod, static inline void xsk_ring_prod__submit(struct xsk_ring_prod *prod, size_t nb) { - /* Make sure everything has been written to the ring before signalling - * this to the kernel. + /* Make sure everything has been written to the ring before indicating + * this to the kernel by writing the producer pointer. */ - smp_wmb(); + libbpf_smp_wmb(); *prod->producer += nb; } @@ -129,11 +134,11 @@ static inline size_t xsk_ring_cons__peek(struct xsk_ring_cons *cons, { size_t entries = xsk_cons_nb_avail(cons, nb); - if (likely(entries > 0)) { + if (entries > 0) { /* Make sure we do not speculatively read the data before * we have received the packet buffers from the ring. */ - smp_rmb(); + libbpf_smp_rmb(); *idx = cons->cached_cons; cons->cached_cons += entries; @@ -144,6 +149,11 @@ static inline size_t xsk_ring_cons__peek(struct xsk_ring_cons *cons, static inline void xsk_ring_cons__release(struct xsk_ring_cons *cons, size_t nb) { + /* Make sure data has been read before indicating we are done + * with the entries by updating the consumer pointer. + */ + libbpf_smp_rwmb(); + *cons->consumer += nb; } diff --git a/tools/lib/traceevent/Documentation/Makefile b/tools/lib/traceevent/Documentation/Makefile new file mode 100644 index 000000000000..aa72ab96c3c1 --- /dev/null +++ b/tools/lib/traceevent/Documentation/Makefile @@ -0,0 +1,207 @@ +include ../../../scripts/Makefile.include +include ../../../scripts/utilities.mak + +# This Makefile and manpage XSL files were taken from tools/perf/Documentation +# and modified for libtraceevent. + +MAN3_TXT= \ + $(wildcard libtraceevent-*.txt) \ + libtraceevent.txt + +MAN_TXT = $(MAN3_TXT) +_MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) +_MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT)) +_DOC_MAN3=$(patsubst %.txt,%.3,$(MAN3_TXT)) + +MAN_XML=$(addprefix $(OUTPUT),$(_MAN_XML)) +MAN_HTML=$(addprefix $(OUTPUT),$(_MAN_HTML)) +DOC_MAN3=$(addprefix $(OUTPUT),$(_DOC_MAN3)) + +# Make the path relative to DESTDIR, not prefix +ifndef DESTDIR +prefix?=$(HOME) +endif +bindir?=$(prefix)/bin +htmldir?=$(prefix)/share/doc/libtraceevent-doc +pdfdir?=$(prefix)/share/doc/libtraceevent-doc +mandir?=$(prefix)/share/man +man3dir=$(mandir)/man3 + +ASCIIDOC=asciidoc +ASCIIDOC_EXTRA = --unsafe -f asciidoc.conf +ASCIIDOC_HTML = xhtml11 +MANPAGE_XSL = manpage-normal.xsl +XMLTO_EXTRA = +INSTALL?=install +RM ?= rm -f + +ifdef USE_ASCIIDOCTOR +ASCIIDOC = asciidoctor +ASCIIDOC_EXTRA = -a compat-mode +ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions +ASCIIDOC_EXTRA += -a mansource="libtraceevent" -a manmanual="libtraceevent Manual" +ASCIIDOC_HTML = xhtml5 +endif + +XMLTO=xmlto + +_tmp_tool_path := $(call get-executable,$(ASCIIDOC)) +ifeq ($(_tmp_tool_path),) + missing_tools = $(ASCIIDOC) +endif + +ifndef USE_ASCIIDOCTOR +_tmp_tool_path := $(call get-executable,$(XMLTO)) +ifeq ($(_tmp_tool_path),) + missing_tools += $(XMLTO) +endif +endif + +# +# For asciidoc ... +# -7.1.2, no extra settings are needed. +# 8.0-, set ASCIIDOC8. +# + +# +# For docbook-xsl ... +# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0) +# 1.69.0, no extra settings are needed? +# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? +# 1.71.1, no extra settings are needed? +# 1.72.0, set DOCBOOK_XSL_172. +# 1.73.0-, set ASCIIDOC_NO_ROFF +# + +# +# If you had been using DOCBOOK_XSL_172 in an attempt to get rid +# of 'the ".ft C" problem' in your generated manpages, and you +# instead ended up with weird characters around callouts, try +# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8). +# + +ifdef ASCIIDOC8 +ASCIIDOC_EXTRA += -a asciidoc7compatible +endif +ifdef DOCBOOK_XSL_172 +ASCIIDOC_EXTRA += -a libtraceevent-asciidoc-no-roff +MANPAGE_XSL = manpage-1.72.xsl +else + ifdef ASCIIDOC_NO_ROFF + # docbook-xsl after 1.72 needs the regular XSL, but will not + # pass-thru raw roff codes from asciidoc.conf, so turn them off. + ASCIIDOC_EXTRA += -a libtraceevent-asciidoc-no-roff + endif +endif +ifdef MAN_BOLD_LITERAL +XMLTO_EXTRA += -m manpage-bold-literal.xsl +endif +ifdef DOCBOOK_SUPPRESS_SP +XMLTO_EXTRA += -m manpage-suppress-sp.xsl +endif + +SHELL_PATH ?= $(SHELL) +# Shell quote; +SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) + +DESTDIR ?= +DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))' + +export DESTDIR DESTDIR_SQ + +# +# Please note that there is a minor bug in asciidoc. +# The version after 6.0.3 _will_ include the patch found here: +# http://marc.theaimsgroup.com/?l=libtraceevent&m=111558757202243&w=2 +# +# Until that version is released you may have to apply the patch +# yourself - yes, all 6 characters of it! +# +QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(findstring $(MAKEFLAGS),w),w) +PRINT_DIR = --no-print-directory +else # "make -w" +NO_SUBDIR = : +endif + +ifneq ($(findstring $(MAKEFLAGS),s),s) +ifneq ($(V),1) + QUIET_ASCIIDOC = @echo ' ASCIIDOC '$@; + QUIET_XMLTO = @echo ' XMLTO '$@; + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) \ + echo ' SUBDIR ' $$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir + export V +endif +endif + +all: html man + +man: man3 +man3: $(DOC_MAN3) + +html: $(MAN_HTML) + +$(MAN_HTML) $(DOC_MAN3): asciidoc.conf + +install: install-man + +check-man-tools: +ifdef missing_tools + $(error "You need to install $(missing_tools) for man pages") +endif + +do-install-man: man + $(call QUIET_INSTALL, Documentation-man) \ + $(INSTALL) -d -m 755 $(DESTDIR)$(man3dir); \ + $(INSTALL) -m 644 $(DOC_MAN3) $(DESTDIR)$(man3dir); + +install-man: check-man-tools man do-install-man + +uninstall: uninstall-man + +uninstall-man: + $(call QUIET_UNINST, Documentation-man) \ + $(Q)$(RM) $(addprefix $(DESTDIR)$(man3dir)/,$(DOC_MAN3)) + + +ifdef missing_tools + DO_INSTALL_MAN = $(warning Please install $(missing_tools) to have the man pages installed) +else + DO_INSTALL_MAN = do-install-man +endif + +CLEAN_FILES = \ + $(MAN_XML) $(addsuffix +,$(MAN_XML)) \ + $(MAN_HTML) $(addsuffix +,$(MAN_HTML)) \ + $(DOC_MAN3) *.3 + +clean: + $(call QUIET_CLEAN, Documentation) $(RM) $(CLEAN_FILES) + +ifdef USE_ASCIIDOCTOR +$(OUTPUT)%.3 : $(OUTPUT)%.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b manpage -d manpage \ + $(ASCIIDOC_EXTRA) -alibtraceevent_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \ + mv $@+ $@ +endif + +$(OUTPUT)%.3 : $(OUTPUT)%.xml + $(QUIET_XMLTO)$(RM) $@ && \ + $(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< + +$(OUTPUT)%.xml : %.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b docbook -d manpage \ + $(ASCIIDOC_EXTRA) -alibtraceevent_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \ + mv $@+ $@ + +$(MAN_HTML): $(OUTPUT)%.html : %.txt + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + $(ASCIIDOC) -b $(ASCIIDOC_HTML) -d manpage \ + $(ASCIIDOC_EXTRA) -aperf_version=$(EVENT_PARSE_VERSION) -o $@+ $< && \ + mv $@+ $@ diff --git a/tools/lib/traceevent/Documentation/asciidoc.conf b/tools/lib/traceevent/Documentation/asciidoc.conf new file mode 100644 index 000000000000..07595717f06e --- /dev/null +++ b/tools/lib/traceevent/Documentation/asciidoc.conf @@ -0,0 +1,120 @@ +## linktep: macro +# +# Usage: linktep:command[manpage-section] +# +# Note, {0} is the manpage section, while {target} is the command. +# +# Show TEP link as: <command>(<section>); if section is defined, else just show +# the command. + +[macros] +(?su)[\\]?(?P<name>linktep):(?P<target>\S*?)\[(?P<attrlist>.*?)\]= + +[attributes] +asterisk=* +plus=+ +caret=^ +startsb=[ +endsb=] +tilde=~ + +ifdef::backend-docbook[] +[linktep-inlinemacro] +{0%{target}} +{0#<citerefentry>} +{0#<refentrytitle>{target}</refentrytitle><manvolnum>{0}</manvolnum>} +{0#</citerefentry>} +endif::backend-docbook[] + +ifdef::backend-docbook[] +ifndef::tep-asciidoc-no-roff[] +# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. +# v1.72 breaks with this because it replaces dots not in roff requests. +[listingblock] +<example><title>{title}</title> +<literallayout> +ifdef::doctype-manpage[] + .ft C +endif::doctype-manpage[] +| +ifdef::doctype-manpage[] + .ft +endif::doctype-manpage[] +</literallayout> +{title#}</example> +endif::tep-asciidoc-no-roff[] + +ifdef::tep-asciidoc-no-roff[] +ifdef::doctype-manpage[] +# The following two small workarounds insert a simple paragraph after screen +[listingblock] +<example><title>{title}</title> +<literallayout> +| +</literallayout><simpara></simpara> +{title#}</example> + +[verseblock] +<formalpara{id? id="{id}"}><title>{title}</title><para> +{title%}<literallayout{id? id="{id}"}> +{title#}<literallayout> +| +</literallayout> +{title#}</para></formalpara> +{title%}<simpara></simpara> +endif::doctype-manpage[] +endif::tep-asciidoc-no-roff[] +endif::backend-docbook[] + +ifdef::doctype-manpage[] +ifdef::backend-docbook[] +[header] +template::[header-declarations] +<refentry> +<refmeta> +<refentrytitle>{mantitle}</refentrytitle> +<manvolnum>{manvolnum}</manvolnum> +<refmiscinfo class="source">libtraceevent</refmiscinfo> +<refmiscinfo class="version">{libtraceevent_version}</refmiscinfo> +<refmiscinfo class="manual">libtraceevent Manual</refmiscinfo> +</refmeta> +<refnamediv> + <refname>{manname1}</refname> + <refname>{manname2}</refname> + <refname>{manname3}</refname> + <refname>{manname4}</refname> + <refname>{manname5}</refname> + <refname>{manname6}</refname> + <refname>{manname7}</refname> + <refname>{manname8}</refname> + <refname>{manname9}</refname> + <refname>{manname10}</refname> + <refname>{manname11}</refname> + <refname>{manname12}</refname> + <refname>{manname13}</refname> + <refname>{manname14}</refname> + <refname>{manname15}</refname> + <refname>{manname16}</refname> + <refname>{manname17}</refname> + <refname>{manname18}</refname> + <refname>{manname19}</refname> + <refname>{manname20}</refname> + <refname>{manname21}</refname> + <refname>{manname22}</refname> + <refname>{manname23}</refname> + <refname>{manname24}</refname> + <refname>{manname25}</refname> + <refname>{manname26}</refname> + <refname>{manname27}</refname> + <refname>{manname28}</refname> + <refname>{manname29}</refname> + <refname>{manname30}</refname> + <refpurpose>{manpurpose}</refpurpose> +</refnamediv> +endif::backend-docbook[] +endif::doctype-manpage[] + +ifdef::backend-xhtml11[] +[linktep-inlinemacro] +<a href="{target}.html">{target}{0?({0})}</a> +endif::backend-xhtml11[] diff --git a/tools/lib/traceevent/Documentation/libtraceevent-commands.txt b/tools/lib/traceevent/Documentation/libtraceevent-commands.txt new file mode 100644 index 000000000000..bec552001f8e --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-commands.txt @@ -0,0 +1,153 @@ +libtraceevent(3) +================ + +NAME +---- +tep_register_comm, tep_override_comm, tep_pid_is_registered, +tep_data_comm_from_pid, tep_data_pid_from_comm, tep_cmdline_pid - +Manage pid to process name mappings. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_register_comm*(struct tep_handle pass:[*]_tep_, const char pass:[*]_comm_, int _pid_); +int *tep_override_comm*(struct tep_handle pass:[*]_tep_, const char pass:[*]_comm_, int _pid_); +bool *tep_is_pid_registered*(struct tep_handle pass:[*]_tep_, int _pid_); +const char pass:[*]*tep_data_comm_from_pid*(struct tep_handle pass:[*]_pevent_, int _pid_); +struct cmdline pass:[*]*tep_data_pid_from_comm*(struct tep_handle pass:[*]_pevent_, const char pass:[*]_comm_, struct cmdline pass:[*]_next_); +int *tep_cmdline_pid*(struct tep_handle pass:[*]_pevent_, struct cmdline pass:[*]_cmdline_); +-- + +DESCRIPTION +----------- +These functions can be used to handle the mapping between pid and process name. +The library builds a cache of these mappings, which is used to display the name +of the process, instead of its pid. This information can be retrieved from +tracefs/saved_cmdlines file. + +The _tep_register_comm()_ function registers a _pid_ / process name mapping. +If a command with the same _pid_ is already registered, an error is returned. +The _pid_ argument is the process ID, the _comm_ argument is the process name, +_tep_ is the event context. The _comm_ is duplicated internally. + +The _tep_override_comm()_ function registers a _pid_ / process name mapping. +If a process with the same pid is already registered, the process name string is +udapted with the new one. The _pid_ argument is the process ID, the _comm_ +argument is the process name, _tep_ is the event context. The _comm_ is +duplicated internally. + +The _tep_is_pid_registered()_ function checks if a pid has a process name +mapping registered. The _pid_ argument is the process ID, _tep_ is the event +context. + +The _tep_data_comm_from_pid()_ function returns the process name for a given +pid. The _pid_ argument is the process ID, _tep_ is the event context. +The returned string should not be freed, but will be freed when the _tep_ +handler is closed. + +The _tep_data_pid_from_comm()_ function returns a pid for a given process name. +The _comm_ argument is the process name, _tep_ is the event context. +The argument _next_ is the cmdline structure to search for the next pid. +As there may be more than one pid for a given process, the result of this call +can be passed back into a recurring call in the _next_ parameter, to search for +the next pid. If _next_ is NULL, it will return the first pid associated with +the _comm_. The function performs a linear search, so it may be slow. + +The _tep_cmdline_pid()_ function returns the pid associated with a given +_cmdline_. The _tep_ argument is the event context. + +RETURN VALUE +------------ +_tep_register_comm()_ function returns 0 on success. In case of an error -1 is +returned and errno is set to indicate the cause of the problem: ENOMEM, if there +is not enough memory to duplicate the _comm_ or EEXIST if a mapping for this +_pid_ is already registered. + +_tep_override_comm()_ function returns 0 on success. In case of an error -1 is +returned and errno is set to indicate the cause of the problem: ENOMEM, if there +is not enough memory to duplicate the _comm_. + +_tep_is_pid_registered()_ function returns true if the _pid_ has a process name +mapped to it, false otherwise. + +_tep_data_comm_from_pid()_ function returns the process name as string, or the +string "<...>" if there is no mapping for the given pid. + +_tep_data_pid_from_comm()_ function returns a pointer to a struct cmdline, that +holds a pid for a given process, or NULL if none is found. This result can be +passed back into a recurring call as the _next_ parameter of the function. + +_tep_cmdline_pid()_ functions returns the pid for the give cmdline. If _cmdline_ + is NULL, then -1 is returned. + +EXAMPLE +------- +The following example registers pid for command "ls", in context of event _tep_ +and performs various searches for pid / process name mappings: +[source,c] +-- +#include <event-parse.h> +... +int ret; +int ls_pid = 1021; +struct tep_handle *tep = tep_alloc(); +... + ret = tep_register_comm(tep, "ls", ls_pid); + if (ret != 0 && errno == EEXIST) + ret = tep_override_comm(tep, "ls", ls_pid); + if (ret != 0) { + /* Failed to register pid / command mapping */ + } +... + if (tep_is_pid_registered(tep, ls_pid) == 0) { + /* Command mapping for ls_pid is not registered */ + } +... + const char *comm = tep_data_comm_from_pid(tep, ls_pid); + if (comm) { + /* Found process name for ls_pid */ + } +... + int pid; + struct cmdline *cmd = tep_data_pid_from_comm(tep, "ls", NULL); + while (cmd) { + pid = tep_cmdline_pid(tep, cmd); + /* Found pid for process "ls" */ + cmd = tep_data_pid_from_comm(tep, "ls", cmd); + } +-- +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-cpus.txt b/tools/lib/traceevent/Documentation/libtraceevent-cpus.txt new file mode 100644 index 000000000000..5ad70e43b752 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-cpus.txt @@ -0,0 +1,77 @@ +libtraceevent(3) +================ + +NAME +---- +tep_get_cpus, tep_set_cpus - Get / set the number of CPUs, which have a tracing +buffer representing it. Note, the buffer may be empty. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_get_cpus*(struct tep_handle pass:[*]_tep_); +void *tep_set_cpus*(struct tep_handle pass:[*]_tep_, int _cpus_); +-- + +DESCRIPTION +----------- +The _tep_get_cpus()_ function gets the number of CPUs, which have a tracing +buffer representing it. The _tep_ argument is trace event parser context. + +The _tep_set_cpus()_ function sets the number of CPUs, which have a tracing +buffer representing it. The _tep_ argument is trace event parser context. +The _cpu_ argument is the number of CPUs with tracing data. + +RETURN VALUE +------------ +The _tep_get_cpus()_ functions returns the number of CPUs, which have tracing +data recorded. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... + tep_set_cpus(tep, 5); +... + printf("We have tracing data for %d CPUs", tep_get_cpus(tep)); +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-endian_read.txt b/tools/lib/traceevent/Documentation/libtraceevent-endian_read.txt new file mode 100644 index 000000000000..e64851b6e189 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-endian_read.txt @@ -0,0 +1,78 @@ +libtraceevent(3) +================ + +NAME +---- +tep_read_number - Reads a number from raw data. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +unsigned long long *tep_read_number*(struct tep_handle pass:[*]_tep_, const void pass:[*]_ptr_, int _size_); +-- + +DESCRIPTION +----------- +The _tep_read_number()_ function reads an integer from raw data, taking into +account the endianness of the raw data and the current host. The _tep_ argument +is the trace event parser context. The _ptr_ is a pointer to the raw data, where +the integer is, and the _size_ is the size of the integer. + +RETURN VALUE +------------ +The _tep_read_number()_ function returns the integer in the byte order of +the current host. In case of an error, 0 is returned. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +void process_record(struct tep_record *record) +{ + int offset = 24; + int data = tep_read_number(tep, record->data + offset, 4); + + /* Read the 4 bytes at the offset 24 of data as an integer */ +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-event_find.txt b/tools/lib/traceevent/Documentation/libtraceevent-event_find.txt new file mode 100644 index 000000000000..7bc062c9f76f --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-event_find.txt @@ -0,0 +1,103 @@ +libtraceevent(3) +================ + +NAME +---- +tep_find_event,tep_find_event_by_name,tep_find_event_by_record - +Find events by given key. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +struct tep_event pass:[*]*tep_find_event*(struct tep_handle pass:[*]_tep_, int _id_); +struct tep_event pass:[*]*tep_find_event_by_name*(struct tep_handle pass:[*]_tep_, const char pass:[*]_sys_, const char pass:[*]_name_); +struct tep_event pass:[*]*tep_find_event_by_record*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_record_); +-- + +DESCRIPTION +----------- +This set of functions can be used to search for an event, based on a given +criteria. All functions require a pointer to a _tep_, trace event parser +context. + +The _tep_find_event()_ function searches for an event by given event _id_. The +event ID is assigned dynamically and can be viewed in event's format file, +"ID" field. + +The tep_find_event_by_name()_ function searches for an event by given +event _name_, under the system _sys_. If the _sys_ is NULL (not specified), +the first event with _name_ is returned. + +The tep_find_event_by_record()_ function searches for an event from a given +_record_. + +RETURN VALUE +------------ +All these functions return a pointer to the found event, or NULL if there is no +such event. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +struct tep_event *event; + +event = tep_find_event(tep, 1857); +if (event == NULL) { + /* There is no event with ID 1857 */ +} + +event = tep_find_event_by_name(tep, "kvm", "kvm_exit"); +if (event == NULL) { + /* There is no kvm_exit event, from kvm system */ +} + +void event_from_record(struct tep_record *record) +{ + struct tep_event *event = tep_find_event_by_record(tep, record); + if (event == NULL) { + /* There is no event from given record */ + } +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-event_get.txt b/tools/lib/traceevent/Documentation/libtraceevent-event_get.txt new file mode 100644 index 000000000000..6525092fc417 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-event_get.txt @@ -0,0 +1,99 @@ +libtraceevent(3) +================ + +NAME +---- +tep_get_event, tep_get_first_event, tep_get_events_count - Access events. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +struct tep_event pass:[*]*tep_get_event*(struct tep_handle pass:[*]_tep_, int _index_); +struct tep_event pass:[*]*tep_get_first_event*(struct tep_handle pass:[*]_tep_); +int *tep_get_events_count*(struct tep_handle pass:[*]_tep_); +-- + +DESCRIPTION +----------- +The _tep_get_event()_ function returns a pointer to event at the given _index_. +The _tep_ argument is trace event parser context, the _index_ is the index of +the requested event. + +The _tep_get_first_event()_ function returns a pointer to the first event. +As events are stored in an array, this function returns the pointer to the +beginning of the array. The _tep_ argument is trace event parser context. + +The _tep_get_events_count()_ function returns the number of the events +in the array. The _tep_ argument is trace event parser context. + +RETURN VALUE +------------ +The _tep_get_event()_ returns a pointer to the event located at _index_. +NULL is returned in case of error, in case there are no events or _index_ is +out of range. + +The _tep_get_first_event()_ returns a pointer to the first event. NULL is +returned in case of error, or in case there are no events. + +The _tep_get_events_count()_ returns the number of the events. 0 is +returned in case of error, or in case there are no events. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +int i,count = tep_get_events_count(tep); +struct tep_event *event, *events = tep_get_first_event(tep); + +if (events == NULL) { + /* There are no events */ +} else { + for (i = 0; i < count; i++) { + event = (events+i); + /* process events[i] */ + } + + /* Get the last event */ + event = tep_get_event(tep, count-1); +} +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-event_list.txt b/tools/lib/traceevent/Documentation/libtraceevent-event_list.txt new file mode 100644 index 000000000000..fba350e5a4cb --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-event_list.txt @@ -0,0 +1,122 @@ +libtraceevent(3) +================ + +NAME +---- +tep_list_events, tep_list_events_copy - +Get list of events, sorted by given criteria. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum *tep_event_sort_type* { + _TEP_EVENT_SORT_ID_, + _TEP_EVENT_SORT_NAME_, + _TEP_EVENT_SORT_SYSTEM_, +}; + +struct tep_event pass:[*]pass:[*]*tep_list_events*(struct tep_handle pass:[*]_tep_, enum tep_event_sort_type _sort_type_); +struct tep_event pass:[*]pass:[*]*tep_list_events_copy*(struct tep_handle pass:[*]_tep_, enum tep_event_sort_type _sort_type_); +-- + +DESCRIPTION +----------- +The _tep_list_events()_ function returns an array of pointers to the events, +sorted by the _sort_type_ criteria. The last element of the array is NULL. +The returned memory must not be freed, it is managed by the library. +The function is not thread safe. The _tep_ argument is trace event parser +context. The _sort_type_ argument is the required sort criteria: +[verse] +-- + _TEP_EVENT_SORT_ID_ - sort by the event ID. + _TEP_EVENT_SORT_NAME_ - sort by the event (name, system, id) triplet. + _TEP_EVENT_SORT_SYSTEM_ - sort by the event (system, name, id) triplet. +-- + +The _tep_list_events_copy()_ is a thread safe version of _tep_list_events()_. +It has the same behavior, but the returned array is allocated internally and +must be freed by the caller. Note that the content of the array must not be +freed (see the EXAMPLE below). + +RETURN VALUE +------------ +The _tep_list_events()_ function returns an array of pointers to events. +In case of an error, NULL is returned. The returned array must not be freed, +it is managed by the library. + +The _tep_list_events_copy()_ function returns an array of pointers to events. +In case of an error, NULL is returned. The returned array must be freed by +the caller. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +int i; +struct tep_event_format **events; + +i=0; +events = tep_list_events(tep, TEP_EVENT_SORT_ID); +if (events == NULL) { + /* Failed to get the events, sorted by ID */ +} else { + while(events[i]) { + /* walk through the list of the events, sorted by ID */ + i++; + } +} + +i=0; +events = tep_list_events_copy(tep, TEP_EVENT_SORT_NAME); +if (events == NULL) { + /* Failed to get the events, sorted by name */ +} else { + while(events[i]) { + /* walk through the list of the events, sorted by name */ + i++; + } + free(events); +} + +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-field_find.txt b/tools/lib/traceevent/Documentation/libtraceevent-field_find.txt new file mode 100644 index 000000000000..0896af5b9eff --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-field_find.txt @@ -0,0 +1,118 @@ +libtraceevent(3) +================ + +NAME +---- +tep_find_common_field, tep_find_field, tep_find_any_field - +Search for a field in an event. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +struct tep_format_field pass:[*]*tep_find_common_field*(struct tep_event pass:[*]_event_, const char pass:[*]_name_); +struct tep_format_field pass:[*]*tep_find_field*(struct tep_event_ormat pass:[*]_event_, const char pass:[*]_name_); +struct tep_format_field pass:[*]*tep_find_any_field*(struct tep_event pass:[*]_event_, const char pass:[*]_name_); +-- + +DESCRIPTION +----------- +These functions search for a field with given name in an event. The field +returned can be used to find the field content from within a data record. + +The _tep_find_common_field()_ function searches for a common field with _name_ +in the _event_. + +The _tep_find_field()_ function searches for an event specific field with +_name_ in the _event_. + +The _tep_find_any_field()_ function searches for any field with _name_ in the +_event_. + +RETURN VALUE +------------ +The _tep_find_common_field(), _tep_find_field()_ and _tep_find_any_field()_ +functions return a pointer to the found field, or NULL in case there is no field +with the requested name. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +void get_htimer_info(struct tep_handle *tep, struct tep_record *record) +{ + struct tep_format_field *field; + struct tep_event *event; + long long softexpires; + int mode; + int pid; + + event = tep_find_event_by_name(tep, "timer", "hrtimer_start"); + + field = tep_find_common_field(event, "common_pid"); + if (field == NULL) { + /* Cannot find "common_pid" field in the event */ + } else { + /* Get pid from the data record */ + pid = tep_read_number(tep, record->data + field->offset, + field->size); + } + + field = tep_find_field(event, "softexpires"); + if (field == NULL) { + /* Cannot find "softexpires" event specific field in the event */ + } else { + /* Get softexpires parameter from the data record */ + softexpires = tep_read_number(tep, record->data + field->offset, + field->size); + } + + field = tep_find_any_field(event, "mode"); + if (field == NULL) { + /* Cannot find "mode" field in the event */ + } else + { + /* Get mode parameter from the data record */ + mode = tep_read_number(tep, record->data + field->offset, + field->size); + } +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-field_get_val.txt b/tools/lib/traceevent/Documentation/libtraceevent-field_get_val.txt new file mode 100644 index 000000000000..6324f0d48aeb --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-field_get_val.txt @@ -0,0 +1,122 @@ +libtraceevent(3) +================ + +NAME +---- +tep_get_any_field_val, tep_get_common_field_val, tep_get_field_val, +tep_get_field_raw - Get value of a field. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* +*#include <trace-seq.h>* + +int *tep_get_any_field_val*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, unsigned long long pass:[*]_val_, int _err_); +int *tep_get_common_field_val*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, unsigned long long pass:[*]_val_, int _err_); +int *tep_get_field_val*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, unsigned long long pass:[*]_val_, int _err_); +void pass:[*]*tep_get_field_raw*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, int pass:[*]_len_, int _err_); +-- + +DESCRIPTION +----------- +These functions can be used to find a field and retrieve its value. + +The _tep_get_any_field_val()_ function searches in the _record_ for a field +with _name_, part of the _event_. If the field is found, its value is stored in +_val_. If there is an error and _err_ is not zero, then an error string is +written into _s_. + +The _tep_get_common_field_val()_ function does the same as +_tep_get_any_field_val()_, but searches only in the common fields. This works +for any event as all events include the common fields. + +The _tep_get_field_val()_ function does the same as _tep_get_any_field_val()_, +but searches only in the event specific fields. + +The _tep_get_field_raw()_ function searches in the _record_ for a field with +_name_, part of the _event_. If the field is found, a pointer to where the field +exists in the record's raw data is returned. The size of the data is stored in +_len_. If there is an error and _err_ is not zero, then an error string is +written into _s_. + +RETURN VALUE +------------ +The _tep_get_any_field_val()_, _tep_get_common_field_val()_ and +_tep_get_field_val()_ functions return 0 on success, or -1 in case of an error. + +The _tep_get_field_raw()_ function returns a pointer to field's raw data, and +places the length of this data in _len_. In case of an error NULL is returned. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +#include <trace-seq.h> +... +struct tep_handle *tep = tep_alloc(); +... +struct tep_event *event = tep_find_event_by_name(tep, "kvm", "kvm_exit"); +... +void process_record(struct tep_record *record) +{ + int len; + char *comm; + struct tep_event_format *event; + unsigned long long val; + + event = tep_find_event_by_record(pevent, record); + if (event != NULL) { + if (tep_get_common_field_val(NULL, event, "common_type", + record, &val, 0) == 0) { + /* Got the value of common type field */ + } + if (tep_get_field_val(NULL, event, "pid", record, &val, 0) == 0) { + /* Got the value of pid specific field */ + } + comm = tep_get_field_raw(NULL, event, "comm", record, &len, 0); + if (comm != NULL) { + /* Got a pointer to the comm event specific field */ + } + } +} +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*trace-seq.h* + Header file to include in order to have access to trace sequences + related APIs. Trace sequences are used to allow a function to call + several other functions to create a string of data to use. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-field_print.txt b/tools/lib/traceevent/Documentation/libtraceevent-field_print.txt new file mode 100644 index 000000000000..9a9df98ac44d --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-field_print.txt @@ -0,0 +1,126 @@ +libtraceevent(3) +================ + +NAME +---- +tep_print_field, tep_print_fields, tep_print_num_field, tep_print_func_field - +Print the field content. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* +*#include <trace-seq.h>* + +void *tep_print_field*(struct trace_seq pass:[*]_s_, void pass:[*]_data_, struct tep_format_field pass:[*]_field_); +void *tep_print_fields*(struct trace_seq pass:[*]_s_, void pass:[*]_data_, int _size_, struct tep_event pass:[*]_event_); +int *tep_print_num_field*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, int _err_); +int *tep_print_func_field*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, int _err_); +-- + +DESCRIPTION +----------- +These functions print recorded field's data, according to the field's type. + +The _tep_print_field()_ function extracts from the recorded raw _data_ value of +the _field_ and prints it into _s_, according to the field type. + +The _tep_print_fields()_ prints each field name followed by the record's field +value according to the field's type: +[verse] +-- +"field1_name=field1_value field2_name=field2_value ..." +-- +It iterates all fields of the _event_, and calls _tep_print_field()_ for each of +them. + +The _tep_print_num_field()_ function prints a numeric field with given format +string. A search is performed in the _event_ for a field with _name_. If such +field is found, its value is extracted from the _record_ and is printed in the +_s_, according to the given format string _fmt_. If the argument _err_ is +non-zero, and an error occures - it is printed in the _s_. + +The _tep_print_func_field()_ function prints a function field with given format +string. A search is performed in the _event_ for a field with _name_. If such +field is found, its value is extracted from the _record_. The value is assumed +to be a function address, and a search is perform to find the name of this +function. The function name (if found) and its address are printed in the _s_, +according to the given format string _fmt_. If the argument _err_ is non-zero, +and an error occures - it is printed in _s_. + +RETURN VALUE +------------ +The _tep_print_num_field()_ and _tep_print_func_field()_ functions return 1 +on success, -1 in case of an error or 0 if the print buffer _s_ is full. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +#include <trace-seq.h> +... +struct tep_handle *tep = tep_alloc(); +... +struct trace_seq seq; +trace_seq_init(&seq); +struct tep_event *event = tep_find_event_by_name(tep, "timer", "hrtimer_start"); +... +void process_record(struct tep_record *record) +{ + struct tep_format_field *field_pid = tep_find_common_field(event, "common_pid"); + + trace_seq_reset(&seq); + + /* Print the value of "common_pid" */ + tep_print_field(&seq, record->data, field_pid); + + /* Print all fields of the "hrtimer_start" event */ + tep_print_fields(&seq, record->data, record->size, event); + + /* Print the value of "expires" field with custom format string */ + tep_print_num_field(&seq, " timer expires in %llu ", event, "expires", record, 0); + + /* Print the address and the name of "function" field with custom format string */ + tep_print_func_field(&seq, " timer function is %s ", event, "function", record, 0); + } + ... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*trace-seq.h* + Header file to include in order to have access to trace sequences related APIs. + Trace sequences are used to allow a function to call several other functions + to create a string of data to use. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-field_read.txt b/tools/lib/traceevent/Documentation/libtraceevent-field_read.txt new file mode 100644 index 000000000000..64e9e25d3fd9 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-field_read.txt @@ -0,0 +1,81 @@ +libtraceevent(3) +================ + +NAME +---- +tep_read_number_field - Reads a number from raw data. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_read_number_field*(struct tep_format_field pass:[*]_field_, const void pass:[*]_data_, unsigned long long pass:[*]_value_); +-- + +DESCRIPTION +----------- +The _tep_read_number_field()_ function reads the value of the _field_ from the +raw _data_ and stores it in the _value_. The function sets the _value_ according +to the endianness of the raw data and the current machine and stores it in +_value_. + +RETURN VALUE +------------ +The _tep_read_number_field()_ function retunrs 0 in case of success, or -1 in +case of an error. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +struct tep_event *event = tep_find_event_by_name(tep, "timer", "hrtimer_start"); +... +void process_record(struct tep_record *record) +{ + unsigned long long pid; + struct tep_format_field *field_pid = tep_find_common_field(event, "common_pid"); + + if (tep_read_number_field(field_pid, record->data, &pid) != 0) { + /* Failed to get "common_pid" value */ + } +} +... +-- +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-fields.txt b/tools/lib/traceevent/Documentation/libtraceevent-fields.txt new file mode 100644 index 000000000000..1ccb531d5114 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-fields.txt @@ -0,0 +1,105 @@ +libtraceevent(3) +================ + +NAME +---- +tep_event_common_fields, tep_event_fields - Get a list of fields for an event. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +struct tep_format_field pass:[*]pass:[*]*tep_event_common_fields*(struct tep_event pass:[*]_event_); +struct tep_format_field pass:[*]pass:[*]*tep_event_fields*(struct tep_event pass:[*]_event_); +-- + +DESCRIPTION +----------- +The _tep_event_common_fields()_ function returns an array of pointers to common +fields for the _event_. The array is allocated in the function and must be freed +by free(). The last element of the array is NULL. + +The _tep_event_fields()_ function returns an array of pointers to event specific +fields for the _event_. The array is allocated in the function and must be freed +by free(). The last element of the array is NULL. + +RETURN VALUE +------------ +Both _tep_event_common_fields()_ and _tep_event_fields()_ functions return +an array of pointers to tep_format_field structures in case of success, or +NULL in case of an error. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +int i; +struct tep_format_field **fields; +struct tep_event *event = tep_find_event_by_name(tep, "kvm", "kvm_exit"); +if (event != NULL) { + fields = tep_event_common_fields(event); + if (fields != NULL) { + i = 0; + while (fields[i]) { + /* + walk through the list of the common fields + of the kvm_exit event + */ + i++; + } + free(fields); + } + fields = tep_event_fields(event); + if (fields != NULL) { + i = 0; + while (fields[i]) { + /* + walk through the list of the event specific + fields of the kvm_exit event + */ + i++; + } + free(fields); + } +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-file_endian.txt b/tools/lib/traceevent/Documentation/libtraceevent-file_endian.txt new file mode 100644 index 000000000000..f401ad311047 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-file_endian.txt @@ -0,0 +1,91 @@ +libtraceevent(3) +================ + +NAME +---- +tep_is_file_bigendian, tep_set_file_bigendian - Get / set the endianness of the +raw data being accessed by the tep handler. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum *tep_endian* { + TEP_LITTLE_ENDIAN = 0, + TEP_BIG_ENDIAN +}; + +bool *tep_is_file_bigendian*(struct tep_handle pass:[*]_tep_); +void *tep_set_file_bigendian*(struct tep_handle pass:[*]_tep_, enum tep_endian _endian_); + +-- +DESCRIPTION +----------- +The _tep_is_file_bigendian()_ function gets the endianness of the raw data, +being accessed by the tep handler. The _tep_ argument is trace event parser +context. + +The _tep_set_file_bigendian()_ function sets the endianness of raw data being +accessed by the tep handler. The _tep_ argument is trace event parser context. +[verse] +-- +The _endian_ argument is the endianness: + _TEP_LITTLE_ENDIAN_ - the raw data is in little endian format, + _TEP_BIG_ENDIAN_ - the raw data is in big endian format. +-- +RETURN VALUE +------------ +The _tep_is_file_bigendian()_ function returns true if the data is in bigendian +format, false otherwise. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... + tep_set_file_bigendian(tep, TEP_LITTLE_ENDIAN); +... + if (tep_is_file_bigendian(tep)) { + /* The raw data is in big endian */ + } else { + /* The raw data is in little endian */ + } +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-filter.txt b/tools/lib/traceevent/Documentation/libtraceevent-filter.txt new file mode 100644 index 000000000000..4a9962d8cb59 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-filter.txt @@ -0,0 +1,209 @@ +libtraceevent(3) +================ + +NAME +---- +tep_filter_alloc, tep_filter_free, tep_filter_reset, tep_filter_make_string, +tep_filter_copy, tep_filter_compare, tep_filter_match, tep_event_filtered, +tep_filter_remove_event, tep_filter_strerror, tep_filter_add_filter_str - +Event filter related APIs. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +struct tep_event_filter pass:[*]*tep_filter_alloc*(struct tep_handle pass:[*]_tep_); +void *tep_filter_free*(struct tep_event_filter pass:[*]_filter_); +void *tep_filter_reset*(struct tep_event_filter pass:[*]_filter_); +enum tep_errno *tep_filter_add_filter_str*(struct tep_event_filter pass:[*]_filter_, const char pass:[*]_filter_str_); +int *tep_event_filtered*(struct tep_event_filter pass:[*]_filter_, int _event_id_); +int *tep_filter_remove_event*(struct tep_event_filter pass:[*]_filter_, int _event_id_); +enum tep_errno *tep_filter_match*(struct tep_event_filter pass:[*]_filter_, struct tep_record pass:[*]_record_); +int *tep_filter_copy*(struct tep_event_filter pass:[*]_dest_, struct tep_event_filter pass:[*]_source_); +int *tep_filter_compare*(struct tep_event_filter pass:[*]_filter1_, struct tep_event_filter pass:[*]_filter2_); +char pass:[*]*tep_filter_make_string*(struct tep_event_filter pass:[*]_filter_, int _event_id_); +int *tep_filter_strerror*(struct tep_event_filter pass:[*]_filter_, enum tep_errno _err_, char pass:[*]buf, size_t _buflen_); +-- + +DESCRIPTION +----------- +Filters can be attached to traced events. They can be used to filter out various +events when outputting them. Each event can be filtered based on its parameters, +described in the event's format file. This set of functions can be used to +create, delete, modify and attach event filters. + +The _tep_filter_alloc()_ function creates a new event filter. The _tep_ argument +is the trace event parser context. + +The _tep_filter_free()_ function frees an event filter and all resources that it +had used. + +The _tep_filter_reset()_ function removes all rules from an event filter and +resets it. + +The _tep_filter_add_filter_str()_ function adds a new rule to the _filter_. The +_filter_str_ argument is the filter string, that contains the rule. + +The _tep_event_filtered()_ function checks if the event with _event_id_ has +_filter_. + +The _tep_filter_remove_event()_ function removes a _filter_ for an event with +_event_id_. + +The _tep_filter_match()_ function tests if a _record_ matches given _filter_. + +The _tep_filter_copy()_ function copies a _source_ filter into a _dest_ filter. + +The _tep_filter_compare()_ function compares two filers - _filter1_ and _filter2_. + +The _tep_filter_make_string()_ function constructs a string, displaying +the _filter_ contents for given _event_id_. + +The _tep_filter_strerror()_ function copies the _filter_ error buffer into the +given _buf_ with the size _buflen_. If the error buffer is empty, in the _buf_ +is copied a string, describing the error _err_. + +RETURN VALUE +------------ +The _tep_filter_alloc()_ function returns a pointer to the newly created event +filter, or NULL in case of an error. + +The _tep_filter_add_filter_str()_ function returns 0 if the rule was +successfully added or a negative error code. Use _tep_filter_strerror()_ to see +actual error message in case of an error. + +The _tep_event_filtered()_ function returns 1 if the filter is found for given +event, or 0 otherwise. + +The _tep_filter_remove_event()_ function returns 1 if the vent was removed, or +0 if the event was not found. + +The _tep_filter_match()_ function returns _tep_errno_, according to the result: +[verse] +-- +_pass:[TEP_ERRNO__FILTER_MATCH]_ - filter found for event, the record matches. +_pass:[TEP_ERRNO__FILTER_MISS]_ - filter found for event, the record does not match. +_pass:[TEP_ERRNO__FILTER_NOT_FOUND]_ - no filter found for record's event. +_pass:[TEP_ERRNO__NO_FILTER]_ - no rules in the filter. +-- +or any other _tep_errno_, if an error occurred during the test. + +The _tep_filter_copy()_ function returns 0 on success or -1 if not all rules + were copied. + +The _tep_filter_compare()_ function returns 1 if the two filters hold the same +content, or 0 if they do not. + +The _tep_filter_make_string()_ function returns a string, which must be freed +with free(), or NULL in case of an error. + +The _tep_filter_strerror()_ function returns 0 if message was filled +successfully, or -1 in case of an error. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +char errstr[200]; +int ret; + +struct tep_event_filter *filter = tep_filter_alloc(tep); +struct tep_event_filter *filter1 = tep_filter_alloc(tep); +ret = tep_filter_add_filter_str(filter, "sched/sched_wakeup:target_cpu==1"); +if(ret < 0) { + tep_filter_strerror(filter, ret, errstr, sizeof(errstr)); + /* Failed to add a new rule to the filter, the error string is in errstr */ +} +if (tep_filter_copy(filter1, filter) != 0) { + /* Failed to copy filter in filter1 */ +} +... +if (tep_filter_compare(filter, filter1) != 1) { + /* Both filters are different */ +} +... +void process_record(struct tep_handle *tep, struct tep_record *record) +{ + struct tep_event *event; + char *fstring; + + event = tep_find_event_by_record(tep, record); + + if (tep_event_filtered(filter, event->id) == 1) { + /* The event has filter */ + fstring = tep_filter_make_string(filter, event->id); + if (fstring != NULL) { + /* The filter for the event is in fstring */ + free(fstring); + } + } + + switch (tep_filter_match(filter, record)) { + case TEP_ERRNO__FILTER_MATCH: + /* The filter matches the record */ + break; + case TEP_ERRNO__FILTER_MISS: + /* The filter does not match the record */ + break; + case TEP_ERRNO__FILTER_NOT_FOUND: + /* No filter found for record's event */ + break; + case TEP_ERRNO__NO_FILTER: + /* There are no rules in the filter */ + break + default: + /* An error occurred during the test */ + break; + } + + if (tep_filter_remove_event(filter, event->id) == 1) { + /* The event was removed from the filter */ + } +} + +... +tep_filter_reset(filter); +... +tep_filter_free(filter); +tep_filter_free(filter1); +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-func_apis.txt b/tools/lib/traceevent/Documentation/libtraceevent-func_apis.txt new file mode 100644 index 000000000000..38bfea30a5f6 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-func_apis.txt @@ -0,0 +1,183 @@ +libtraceevent(3) +================ + +NAME +---- +tep_find_function, tep_find_function_address, tep_set_function_resolver, +tep_reset_function_resolver, tep_register_function, tep_register_print_string - +function related tep APIs + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +typedef char pass:[*](*tep_func_resolver_t*)(void pass:[*]_priv_, unsigned long long pass:[*]_addrp_, char pass:[**]_modp_); +int *tep_set_function_resolver*(struct tep_handle pass:[*]_tep_, tep_func_resolver_t pass:[*]_func_, void pass:[*]_priv_); +void *tep_reset_function_resolver*(struct tep_handle pass:[*]_tep_); +const char pass:[*]*tep_find_function*(struct tep_handle pass:[*]_tep_, unsigned long long _addr_); +unsigned long long *tep_find_function_address*(struct tep_handle pass:[*]_tep_, unsigned long long _addr_); +int *tep_register_function*(struct tep_handle pass:[*]_tep_, char pass:[*]_name_, unsigned long long _addr_, char pass:[*]_mod_); +int *tep_register_print_string*(struct tep_handle pass:[*]_tep_, const char pass:[*]_fmt_, unsigned long long _addr_); +-- + +DESCRIPTION +----------- +Some tools may have already a way to resolve the kernel functions. These APIs +allow them to keep using it instead of duplicating all the entries inside. + +The _tep_func_resolver_t_ type is the prototype of the alternative kernel +functions resolver. This function receives a pointer to its custom context +(set with the _tep_set_function_resolver()_ call ) and the address of a kernel +function, which has to be resolved. In case of success, it should return +the name of the function and its module (if any) in _modp_. + +The _tep_set_function_resolver()_ function registers _func_ as an alternative +kernel functions resolver. The _tep_ argument is trace event parser context. +The _priv_ argument is a custom context of the _func_ function. The function +resolver is used by the APIs _tep_find_function()_, +_tep_find_function_address()_, and _tep_print_func_field()_ to resolve +a function address to a function name. + +The _tep_reset_function_resolver()_ function resets the kernel functions +resolver to the default function. The _tep_ argument is trace event parser +context. + + +These APIs can be used to find function name and start address, by given +address. The given address does not have to be exact, it will select +the function that would contain it. + +The _tep_find_function()_ function returns the function name, which contains the +given address _addr_. The _tep_ argument is the trace event parser context. + +The _tep_find_function_address()_ function returns the function start address, +by given address _addr_. The _addr_ does not have to be exact, it will select +the function that would contain it. The _tep_ argument is the trace event +parser context. + +The _tep_register_function()_ function registers a function name mapped to an +address and (optional) module. This mapping is used in case the function tracer +or events have "%pF" or "%pS" parameter in its format string. It is common to +pass in the kallsyms function names with their corresponding addresses with this +function. The _tep_ argument is the trace event parser context. The _name_ is +the name of the function, the string is copied internally. The _addr_ is +the start address of the function. The _mod_ is the kernel module +the function may be in (NULL for none). + +The _tep_register_print_string()_ function registers a string by the address +it was stored in the kernel. Some strings internal to the kernel with static +address are passed to certain events. The "%s" in the event's format field +which has an address needs to know what string would be at that address. The +tep_register_print_string() supplies the parsing with the mapping between kernel +addresses and those strings. The _tep_ argument is the trace event parser +context. The _fmt_ is the string to register, it is copied internally. +The _addr_ is the address the string was located at. + + +RETURN VALUE +------------ +The _tep_set_function_resolver()_ function returns 0 in case of success, or -1 +in case of an error. + +The _tep_find_function()_ function returns the function name, or NULL in case +it cannot be found. + +The _tep_find_function_address()_ function returns the function start address, +or 0 in case it cannot be found. + +The _tep_register_function()_ function returns 0 in case of success. In case of +an error -1 is returned, and errno is set to the appropriate error number. + +The _tep_register_print_string()_ function returns 0 in case of success. In case +of an error -1 is returned, and errno is set to the appropriate error number. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +char *my_resolve_kernel_addr(void *context, + unsigned long long *addrp, char **modp) +{ + struct db *function_database = context; + struct symbol *sym = sql_lookup(function_database, *addrp); + + if (!sym) + return NULL; + + *modp = sym->module_name; + return sym->name; +} + +void show_function( unsigned long long addr) +{ + unsigned long long fstart; + const char *fname; + + if (tep_set_function_resolver(tep, my_resolve_kernel_addr, + function_database) != 0) { + /* failed to register my_resolve_kernel_addr */ + } + + /* These APIs use my_resolve_kernel_addr() to resolve the addr */ + fname = tep_find_function(tep, addr); + fstart = tep_find_function_address(tep, addr); + + /* + addr is in function named fname, starting at fstart address, + at offset (addr - fstart) + */ + + tep_reset_function_resolver(tep); + +} +... + if (tep_register_function(tep, "kvm_exit", + (unsigned long long) 0x12345678, "kvm") != 0) { + /* Failed to register kvm_exit address mapping */ + } +... + if (tep_register_print_string(tep, "print string", + (unsigned long long) 0x87654321, NULL) != 0) { + /* Failed to register "print string" address mapping */ + } +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-func_find.txt b/tools/lib/traceevent/Documentation/libtraceevent-func_find.txt new file mode 100644 index 000000000000..04840e244445 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-func_find.txt @@ -0,0 +1,88 @@ +libtraceevent(3) +================ + +NAME +---- +tep_find_function,tep_find_function_address - Find function name / start address. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +const char pass:[*]*tep_find_function*(struct tep_handle pass:[*]_tep_, unsigned long long _addr_); +unsigned long long *tep_find_function_address*(struct tep_handle pass:[*]_tep_, unsigned long long _addr_); +-- + +DESCRIPTION +----------- +These functions can be used to find function name and start address, by given +address. The given address does not have to be exact, it will select the function +that would contain it. + +The _tep_find_function()_ function returns the function name, which contains the +given address _addr_. The _tep_ argument is the trace event parser context. + +The _tep_find_function_address()_ function returns the function start address, +by given address _addr_. The _addr_ does not have to be exact, it will select the +function that would contain it. The _tep_ argument is the trace event parser context. + +RETURN VALUE +------------ +The _tep_find_function()_ function returns the function name, or NULL in case +it cannot be found. + +The _tep_find_function_address()_ function returns the function start address, +or 0 in case it cannot be found. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +void show_function( unsigned long long addr) +{ + const char *fname = tep_find_function(tep, addr); + unsigned long long fstart = tep_find_function_address(tep, addr); + + /* addr is in function named fname, starting at fstart address, at offset (addr - fstart) */ +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-handle.txt b/tools/lib/traceevent/Documentation/libtraceevent-handle.txt new file mode 100644 index 000000000000..8d568316847d --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-handle.txt @@ -0,0 +1,101 @@ +libtraceevent(3) +================ + +NAME +---- +tep_alloc, tep_free,tep_ref, tep_unref,tep_ref_get - Create, destroy, manage +references of trace event parser context. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +struct tep_handle pass:[*]*tep_alloc*(void); +void *tep_free*(struct tep_handle pass:[*]_tep_); +void *tep_ref*(struct tep_handle pass:[*]_tep_); +void *tep_unref*(struct tep_handle pass:[*]_tep_); +int *tep_ref_get*(struct tep_handle pass:[*]_tep_); +-- + +DESCRIPTION +----------- +These are the main functions to create and destroy tep_handle - the main +structure, representing the trace event parser context. This context is used as +the input parameter of most library APIs. + +The _tep_alloc()_ function allocates and initializes the tep context. + +The _tep_free()_ function will decrement the reference of the _tep_ handler. +When there is no more references, then it will free the handler, as well +as clean up all its resources that it had used. The argument _tep_ is +the pointer to the trace event parser context. + +The _tep_ref()_ function adds a reference to the _tep_ handler. + +The _tep_unref()_ function removes a reference from the _tep_ handler. When +the last reference is removed, the _tep_ is destroyed, and all resources that +it had used are cleaned up. + +The _tep_ref_get()_ functions gets the current references of the _tep_ handler. + +RETURN VALUE +------------ +_tep_alloc()_ returns a pointer to a newly created tep_handle structure. +NULL is returned in case there is not enough free memory to allocate it. + +_tep_ref_get()_ returns the current references of _tep_. +If _tep_ is NULL, 0 is returned. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> + +... +struct tep_handle *tep = tep_alloc(); +... +int ref = tep_ref_get(tep); +tep_ref(tep); +if ( (ref+1) != tep_ref_get(tep)) { + /* Something wrong happened, the counter is not incremented by 1 */ +} +tep_unref(tep); +... +tep_free(tep); +... +-- +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-header_page.txt b/tools/lib/traceevent/Documentation/libtraceevent-header_page.txt new file mode 100644 index 000000000000..615d117dc39f --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-header_page.txt @@ -0,0 +1,102 @@ +libtraceevent(3) +================ + +NAME +---- +tep_get_header_page_size, tep_get_header_timestamp_size, tep_is_old_format - +Get the data stored in the header page, in kernel context. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_get_header_page_size*(struct tep_handle pass:[*]_tep_); +int *tep_get_header_timestamp_size*(struct tep_handle pass:[*]_tep_); +bool *tep_is_old_format*(struct tep_handle pass:[*]_tep_); +-- +DESCRIPTION +----------- +These functions retrieve information from kernel context, stored in tracefs +events/header_page. Old kernels do not have header page info, so default values +from user space context are used. + +The _tep_get_header_page_size()_ function returns the size of a long integer, +in kernel context. The _tep_ argument is trace event parser context. +This information is retrieved from tracefs events/header_page, "commit" field. + +The _tep_get_header_timestamp_size()_ function returns the size of timestamps, +in kernel context. The _tep_ argument is trace event parser context. This +information is retrieved from tracefs events/header_page, "timestamp" field. + +The _tep_is_old_format()_ function returns true if the kernel predates +the addition of events/header_page, otherwise it returns false. + +RETURN VALUE +------------ +The _tep_get_header_page_size()_ function returns the size of a long integer, +in bytes. + +The _tep_get_header_timestamp_size()_ function returns the size of timestamps, +in bytes. + +The _tep_is_old_format()_ function returns true, if an old kernel is used to +generate the tracing data, which has no event/header_page. If the kernel is new, +or _tep_ is NULL, false is returned. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... + int longsize; + int timesize; + bool old; + + longsize = tep_get_header_page_size(tep); + timesize = tep_get_header_timestamp_size(tep); + old = tep_is_old_format(tep); + + printf ("%s kernel is used to generate the tracing data.\n", + old?"Old":"New"); + printf("The size of a long integer is %d bytes.\n", longsize); + printf("The timestamps size is %d bytes.\n", timesize); +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-host_endian.txt b/tools/lib/traceevent/Documentation/libtraceevent-host_endian.txt new file mode 100644 index 000000000000..d5d375eb8d1e --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-host_endian.txt @@ -0,0 +1,104 @@ +libtraceevent(3) +================ + +NAME +---- +tep_is_bigendian, tep_is_local_bigendian, tep_set_local_bigendian - Get / set +the endianness of the local machine. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum *tep_endian* { + TEP_LITTLE_ENDIAN = 0, + TEP_BIG_ENDIAN +}; + +int *tep_is_bigendian*(void); +bool *tep_is_local_bigendian*(struct tep_handle pass:[*]_tep_); +void *tep_set_local_bigendian*(struct tep_handle pass:[*]_tep_, enum tep_endian _endian_); +-- + +DESCRIPTION +----------- + +The _tep_is_bigendian()_ gets the endianness of the machine, executing +the function. + +The _tep_is_local_bigendian()_ function gets the endianness of the local +machine, saved in the _tep_ handler. The _tep_ argument is the trace event +parser context. This API is a bit faster than _tep_is_bigendian()_, as it +returns cached endianness of the local machine instead of checking it each time. + +The _tep_set_local_bigendian()_ function sets the endianness of the local +machine in the _tep_ handler. The _tep_ argument is trace event parser context. +The _endian_ argument is the endianness: +[verse] +-- + _TEP_LITTLE_ENDIAN_ - the machine is little endian, + _TEP_BIG_ENDIAN_ - the machine is big endian. +-- + +RETURN VALUE +------------ +The _tep_is_bigendian()_ function returns non zero if the endianness of the +machine, executing the code, is big endian and zero otherwise. + +The _tep_is_local_bigendian()_ function returns true, if the endianness of the +local machine, saved in the _tep_ handler, is big endian, or false otherwise. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... + if (tep_is_bigendian()) + tep_set_local_bigendian(tep, TEP_BIG_ENDIAN); + else + tep_set_local_bigendian(tep, TEP_LITTLE_ENDIAN); +... + if (tep_is_local_bigendian(tep)) + printf("This machine you are running on is bigendian\n"); + else + printf("This machine you are running on is little endian\n"); + +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-long_size.txt b/tools/lib/traceevent/Documentation/libtraceevent-long_size.txt new file mode 100644 index 000000000000..01d78ea2519a --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-long_size.txt @@ -0,0 +1,78 @@ +libtraceevent(3) +================ + +NAME +---- +tep_get_long_size, tep_set_long_size - Get / set the size of a long integer on +the machine, where the trace is generated, in bytes + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_get_long_size*(strucqt tep_handle pass:[*]_tep_); +void *tep_set_long_size*(struct tep_handle pass:[*]_tep_, int _long_size_); +-- + +DESCRIPTION +----------- +The _tep_get_long_size()_ function returns the size of a long integer on the machine, +where the trace is generated. The _tep_ argument is trace event parser context. + +The _tep_set_long_size()_ function sets the size of a long integer on the machine, +where the trace is generated. The _tep_ argument is trace event parser context. +The _long_size_ is the size of a long integer, in bytes. + +RETURN VALUE +------------ +The _tep_get_long_size()_ function returns the size of a long integer on the machine, +where the trace is generated, in bytes. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +tep_set_long_size(tep, 4); +... +int long_size = tep_get_long_size(tep); +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-page_size.txt b/tools/lib/traceevent/Documentation/libtraceevent-page_size.txt new file mode 100644 index 000000000000..452c0cfa1822 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-page_size.txt @@ -0,0 +1,82 @@ +libtraceevent(3) +================ + +NAME +---- +tep_get_page_size, tep_set_page_size - Get / set the size of a memory page on +the machine, where the trace is generated + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_get_page_size*(struct tep_handle pass:[*]_tep_); +void *tep_set_page_size*(struct tep_handle pass:[*]_tep_, int _page_size_); +-- + +DESCRIPTION +----------- +The _tep_get_page_size()_ function returns the size of a memory page on +the machine, where the trace is generated. The _tep_ argument is trace +event parser context. + +The _tep_set_page_size()_ function stores in the _tep_ context the size of a +memory page on the machine, where the trace is generated. +The _tep_ argument is trace event parser context. +The _page_size_ argument is the size of a memory page, in bytes. + +RETURN VALUE +------------ +The _tep_get_page_size()_ function returns size of the memory page, in bytes. + +EXAMPLE +------- +[source,c] +-- +#include <unistd.h> +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... + int page_size = getpagesize(); + + tep_set_page_size(tep, page_size); + + printf("The page size for this machine is %d\n", tep_get_page_size(tep)); + +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-parse_event.txt b/tools/lib/traceevent/Documentation/libtraceevent-parse_event.txt new file mode 100644 index 000000000000..f248114ca1ff --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-parse_event.txt @@ -0,0 +1,90 @@ +libtraceevent(3) +================ + +NAME +---- +tep_parse_event, tep_parse_format - Parse the event format information + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum tep_errno *tep_parse_event*(struct tep_handle pass:[*]_tep_, const char pass:[*]_buf_, unsigned long _size_, const char pass:[*]_sys_); +enum tep_errno *tep_parse_format*(struct tep_handle pass:[*]_tep_, struct tep_event pass:[*]pass:[*]_eventp_, const char pass:[*]_buf_, unsigned long _size_, const char pass:[*]_sys_); +-- + +DESCRIPTION +----------- +The _tep_parse_event()_ function parses the event format and creates an event +structure to quickly parse raw data for a given event. The _tep_ argument is +the trace event parser context. The created event structure is stored in the +_tep_ context. The _buf_ argument is a buffer with _size_, where the event +format data is. The event format data can be taken from +tracefs/events/.../.../format files. The _sys_ argument is the system of +the event. + +The _tep_parse_format()_ function does the same as _tep_parse_event()_. The only +difference is in the extra _eventp_ argument, where the newly created event +structure is returned. + +RETURN VALUE +------------ +Both _tep_parse_event()_ and _tep_parse_format()_ functions return 0 on success, +or TEP_ERRNO__... in case of an error. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +char *buf; +int size; +struct tep_event *event = NULL; +buf = read_file("/sys/kernel/tracing/events/ftrace/print/format", &size); +if (tep_parse_event(tep, buf, size, "ftrace") != 0) { + /* Failed to parse the ftrace print format */ +} + +if (tep_parse_format(tep, &event, buf, size, "ftrace") != 0) { + /* Failed to parse the ftrace print format */ +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-parse_head.txt b/tools/lib/traceevent/Documentation/libtraceevent-parse_head.txt new file mode 100644 index 000000000000..c90f16c7d8e6 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-parse_head.txt @@ -0,0 +1,82 @@ +libtraceevent(3) +================ + +NAME +---- +tep_parse_header_page - Parses the data stored in the header page. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_parse_header_page*(struct tep_handle pass:[*]_tep_, char pass:[*]_buf_, unsigned long _size_, int _long_size_); +-- + +DESCRIPTION +----------- +The _tep_parse_header_page()_ function parses the header page data from _buf_, +and initializes the _tep_, trace event parser context, with it. The buffer +_buf_ is with _size_, and is supposed to be copied from +tracefs/events/header_page. + +Some old kernels do not have header page info, in this case the +_tep_parse_header_page()_ function can be called with _size_ equal to 0. The +_tep_ context is initialized with default values. The _long_size_ can be used in +this use case, to set the size of a long integer to be used. + +RETURN VALUE +------------ +The _tep_parse_header_page()_ function returns 0 in case of success, or -1 +in case of an error. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +char *buf; +int size; +buf = read_file("/sys/kernel/tracing/events/header_page", &size); +if (tep_parse_header_page(tep, buf, size, sizeof(unsigned long)) != 0) { + /* Failed to parse the header page */ +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-record_parse.txt b/tools/lib/traceevent/Documentation/libtraceevent-record_parse.txt new file mode 100644 index 000000000000..e9a69116c78b --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-record_parse.txt @@ -0,0 +1,137 @@ +libtraceevent(3) +================ + +NAME +---- +tep_data_type, tep_data_pid,tep_data_preempt_count, tep_data_flags - +Extract common fields from a record. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum *trace_flag_type* { + _TRACE_FLAG_IRQS_OFF_, + _TRACE_FLAG_IRQS_NOSUPPORT_, + _TRACE_FLAG_NEED_RESCHED_, + _TRACE_FLAG_HARDIRQ_, + _TRACE_FLAG_SOFTIRQ_, +}; + +int *tep_data_type*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); +int *tep_data_pid*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); +int *tep_data_preempt_count*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); +int *tep_data_flags*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); +-- + +DESCRIPTION +----------- +This set of functions can be used to extract common fields from a record. + +The _tep_data_type()_ function gets the event id from the record _rec_. +It reads the "common_type" field. The _tep_ argument is the trace event parser +context. + +The _tep_data_pid()_ function gets the process id from the record _rec_. +It reads the "common_pid" field. The _tep_ argument is the trace event parser +context. + +The _tep_data_preempt_count()_ function gets the preemption count from the +record _rec_. It reads the "common_preempt_count" field. The _tep_ argument is +the trace event parser context. + +The _tep_data_flags()_ function gets the latency flags from the record _rec_. +It reads the "common_flags" field. The _tep_ argument is the trace event parser +context. Supported latency flags are: +[verse] +-- + _TRACE_FLAG_IRQS_OFF_, Interrupts are disabled. + _TRACE_FLAG_IRQS_NOSUPPORT_, Reading IRQ flag is not supported by the architecture. + _TRACE_FLAG_NEED_RESCHED_, Task needs rescheduling. + _TRACE_FLAG_HARDIRQ_, Hard IRQ is running. + _TRACE_FLAG_SOFTIRQ_, Soft IRQ is running. +-- + +RETURN VALUE +------------ +The _tep_data_type()_ function returns an integer, representing the event id. + +The _tep_data_pid()_ function returns an integer, representing the process id + +The _tep_data_preempt_count()_ function returns an integer, representing the +preemption count. + +The _tep_data_flags()_ function returns an integer, representing the latency +flags. Look at the _trace_flag_type_ enum for supported flags. + +All these functions in case of an error return a negative integer. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +void process_record(struct tep_record *record) +{ + int data; + + data = tep_data_type(tep, record); + if (data >= 0) { + /* Got the ID of the event */ + } + + data = tep_data_pid(tep, record); + if (data >= 0) { + /* Got the process ID */ + } + + data = tep_data_preempt_count(tep, record); + if (data >= 0) { + /* Got the preemption count */ + } + + data = tep_data_flags(tep, record); + if (data >= 0) { + /* Got the latency flags */ + } +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-reg_event_handler.txt b/tools/lib/traceevent/Documentation/libtraceevent-reg_event_handler.txt new file mode 100644 index 000000000000..53d37d72a1c1 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-reg_event_handler.txt @@ -0,0 +1,156 @@ +libtraceevent(3) +================ + +NAME +---- +tep_register_event_handler, tep_unregister_event_handler - Register / +unregisters a callback function to parse an event information. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum *tep_reg_handler* { + _TEP_REGISTER_SUCCESS_, + _TEP_REGISTER_SUCCESS_OVERWRITE_, +}; + +int *tep_register_event_handler*(struct tep_handle pass:[*]_tep_, int _id_, const char pass:[*]_sys_name_, const char pass:[*]_event_name_, tep_event_handler_func _func_, void pass:[*]_context_); +int *tep_unregister_event_handler*(struct tep_handle pass:[*]tep, int id, const char pass:[*]sys_name, const char pass:[*]event_name, tep_event_handler_func func, void pass:[*]_context_); + +typedef int (*pass:[*]tep_event_handler_func*)(struct trace_seq pass:[*]s, struct tep_record pass:[*]record, struct tep_event pass:[*]event, void pass:[*]context); +-- + +DESCRIPTION +----------- +The _tep_register_event_handler()_ function registers a handler function, +which is going to be called to parse the information for a given event. +The _tep_ argument is the trace event parser context. The _id_ argument is +the id of the event. The _sys_name_ argument is the name of the system, +the event belongs to. The _event_name_ argument is the name of the event. +If _id_ is >= 0, it is used to find the event, otherwise _sys_name_ and +_event_name_ are used. The _func_ is a pointer to the function, which is going +to be called to parse the event information. The _context_ argument is a pointer +to the context data, which will be passed to the _func_. If a handler function +for the same event is already registered, it will be overridden with the new +one. This mechanism allows a developer to override the parsing of a given event. +If for some reason the default print format is not sufficient, the developer +can register a function for an event to be used to parse the data instead. + +The _tep_unregister_event_handler()_ function unregisters the handler function, +previously registered with _tep_register_event_handler()_. The _tep_ argument +is the trace event parser context. The _id_, _sys_name_, _event_name_, _func_, +and _context_ are the same arguments, as when the callback function _func_ was +registered. + +The _tep_event_handler_func_ is the type of the custom event handler +function. The _s_ argument is the trace sequence, it can be used to create a +custom string, describing the event. A _record_ to get the event from is passed +as input parameter and also the _event_ - the handle to the record's event. The +_context_ is custom context, set when the custom event handler is registered. + +RETURN VALUE +------------ +The _tep_register_event_handler()_ function returns _TEP_REGISTER_SUCCESS_ +if the new handler is registered successfully or +_TEP_REGISTER_SUCCESS_OVERWRITE_ if an existing handler is overwritten. +If there is not enough memory to complete the registration, +TEP_ERRNO__MEM_ALLOC_FAILED is returned. + +The _tep_unregister_event_handler()_ function returns 0 if _func_ was removed +successful or, -1 if the event was not found. + +The _tep_event_handler_func_ should return -1 in case of an error, +or 0 otherwise. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +#include <trace-seq.h> +... +struct tep_handle *tep = tep_alloc(); +... +int timer_expire_handler(struct trace_seq *s, struct tep_record *record, + struct tep_event *event, void *context) +{ + trace_seq_printf(s, "hrtimer="); + + if (tep_print_num_field(s, "0x%llx", event, "timer", record, 0) == -1) + tep_print_num_field(s, "0x%llx", event, "hrtimer", record, 1); + + trace_seq_printf(s, " now="); + + tep_print_num_field(s, "%llu", event, "now", record, 1); + + tep_print_func_field(s, " function=%s", event, "function", record, 0); + + return 0; +} +... + int ret; + + ret = tep_register_event_handler(tep, -1, "timer", "hrtimer_expire_entry", + timer_expire_handler, NULL); + if (ret < 0) { + char buf[32]; + + tep_strerror(tep, ret, buf, 32) + printf("Failed to register handler for hrtimer_expire_entry: %s\n", buf); + } else { + switch (ret) { + case TEP_REGISTER_SUCCESS: + printf ("Registered handler for hrtimer_expire_entry\n"); + break; + case TEP_REGISTER_SUCCESS_OVERWRITE: + printf ("Overwrote handler for hrtimer_expire_entry\n"); + break; + } + } +... + ret = tep_unregister_event_handler(tep, -1, "timer", "hrtimer_expire_entry", + timer_expire_handler, NULL); + if ( ret ) + printf ("Failed to unregister handler for hrtimer_expire_entry\n"); + +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*trace-seq.h* + Header file to include in order to have access to trace sequences + related APIs. Trace sequences are used to allow a function to call + several other functions to create a string of data to use. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-reg_print_func.txt b/tools/lib/traceevent/Documentation/libtraceevent-reg_print_func.txt new file mode 100644 index 000000000000..708dce91ebd8 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-reg_print_func.txt @@ -0,0 +1,155 @@ +libtraceevent(3) +================ + +NAME +---- +tep_register_print_function,tep_unregister_print_function - +Registers / Unregisters a helper function. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum *tep_func_arg_type* { + TEP_FUNC_ARG_VOID, + TEP_FUNC_ARG_INT, + TEP_FUNC_ARG_LONG, + TEP_FUNC_ARG_STRING, + TEP_FUNC_ARG_PTR, + TEP_FUNC_ARG_MAX_TYPES +}; + +typedef unsigned long long (*pass:[*]tep_func_handler*)(struct trace_seq pass:[*]s, unsigned long long pass:[*]args); + +int *tep_register_print_function*(struct tep_handle pass:[*]_tep_, tep_func_handler _func_, enum tep_func_arg_type _ret_type_, char pass:[*]_name_, _..._); +int *tep_unregister_print_function*(struct tep_handle pass:[*]_tep_, tep_func_handler _func_, char pass:[*]_name_); +-- + +DESCRIPTION +----------- +Some events may have helper functions in the print format arguments. +This allows a plugin to dynamically create a way to process one of +these functions. + +The _tep_register_print_function()_ registers such helper function. The _tep_ +argument is the trace event parser context. The _func_ argument is a pointer +to the helper function. The _ret_type_ argument is the return type of the +helper function, value from the _tep_func_arg_type_ enum. The _name_ is the name +of the helper function, as seen in the print format arguments. The _..._ is a +variable list of _tep_func_arg_type_ enums, the _func_ function arguments. +This list must end with _TEP_FUNC_ARG_VOID_. See 'EXAMPLE' section. + +The _tep_unregister_print_function()_ unregisters a helper function, previously +registered with _tep_register_print_function()_. The _tep_ argument is the +trace event parser context. The _func_ and _name_ arguments are the same, used +when the helper function was registered. + +The _tep_func_handler_ is the type of the helper function. The _s_ argument is +the trace sequence, it can be used to create a custom string. +The _args_ is a list of arguments, defined when the helper function was +registered. + +RETURN VALUE +------------ +The _tep_register_print_function()_ function returns 0 in case of success. +In case of an error, TEP_ERRNO_... code is returned. + +The _tep_unregister_print_function()_ returns 0 in case of success, or -1 in +case of an error. + +EXAMPLE +------- +Some events have internal functions calls, that appear in the print format +output. For example "tracefs/events/i915/g4x_wm/format" has: +[source,c] +-- +print fmt: "pipe %c, frame=%u, scanline=%u, wm %d/%d/%d, sr %s/%d/%d/%d, hpll %s/%d/%d/%d, fbc %s", + ((REC->pipe) + 'A'), REC->frame, REC->scanline, REC->primary, + REC->sprite, REC->cursor, yesno(REC->cxsr), REC->sr_plane, + REC->sr_cursor, REC->sr_fbc, yesno(REC->hpll), REC->hpll_plane, + REC->hpll_cursor, REC->hpll_fbc, yesno(REC->fbc) +-- +Notice the call to function _yesno()_ in the print arguments. In the kernel +context, this function has the following implementation: +[source,c] +-- +static const char *yesno(int x) +{ + static const char *yes = "yes"; + static const char *no = "no"; + + return x ? yes : no; +} +-- +The user space event parser has no idea how to handle this _yesno()_ function. +The _tep_register_print_function()_ API can be used to register a user space +helper function, mapped to the kernel's _yesno()_: +[source,c] +-- +#include <event-parse.h> +#include <trace-seq.h> +... +struct tep_handle *tep = tep_alloc(); +... +static const char *yes_no_helper(int x) +{ + return x ? "yes" : "no"; +} +... + if ( tep_register_print_function(tep, + yes_no_helper, + TEP_FUNC_ARG_STRING, + "yesno", + TEP_FUNC_ARG_INT, + TEP_FUNC_ARG_VOID) != 0) { + /* Failed to register yes_no_helper function */ + } + +/* + Now, when the event parser encounters this yesno() function, it will know + how to handle it. +*/ +... + if (tep_unregister_print_function(tep, yes_no_helper, "yesno") != 0) { + /* Failed to unregister yes_no_helper function */ + } +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*trace-seq.h* + Header file to include in order to have access to trace sequences + related APIs. Trace sequences are used to allow a function to call + several other functions to create a string of data to use. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-set_flag.txt b/tools/lib/traceevent/Documentation/libtraceevent-set_flag.txt new file mode 100644 index 000000000000..b0599780b9a6 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-set_flag.txt @@ -0,0 +1,104 @@ +libtraceevent(3) +================ + +NAME +---- +tep_set_flag, tep_clear_flag, tep_test_flag - +Manage flags of trace event parser context. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +enum *tep_flag* { + _TEP_NSEC_OUTPUT_, + _TEP_DISABLE_SYS_PLUGINS_, + _TEP_DISABLE_PLUGINS_ +}; +void *tep_set_flag*(struct tep_handle pass:[*]_tep_, enum tep_flag _flag_); +void *tep_clear_flag*(struct tep_handle pass:[*]_tep_, enum tep_flag _flag_); +bool *tep_test_flag*(struct tep_handle pass:[*]_tep_, enum tep_flag _flag_); +-- + +DESCRIPTION +----------- +Trace event parser context flags are defined in *enum tep_flag*: +[verse] +-- +_TEP_NSEC_OUTPUT_ - print event's timestamp in nano seconds, instead of micro seconds. +_TEP_DISABLE_SYS_PLUGINS_ - disable plugins, located in system's plugin + directory. This directory is defined at library compile + time, and usually depends on library installation + prefix: (install_preffix)/lib/traceevent/plugins +_TEP_DISABLE_PLUGINS_ - disable all library plugins: + - in system's plugin directory + - in directory, defined by the environment variable _TRACEEVENT_PLUGIN_DIR_ + - in user's home directory, _~/.traceevent/plugins_ +-- +Note: plugin related flags must me set before calling _tep_load_plugins()_ API. + +The _tep_set_flag()_ function sets _flag_ to _tep_ context. + +The _tep_clear_flag()_ function clears _flag_ from _tep_ context. + +The _tep_test_flag()_ function tests if _flag_ is set to _tep_ context. + +RETURN VALUE +------------ +_tep_test_flag()_ function returns true if _flag_ is set, false otherwise. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +/* Print timestamps in nanoseconds */ +tep_set_flag(tep, TEP_NSEC_OUTPUT); +... +if (tep_test_flag(tep, TEP_NSEC_OUTPUT)) { + /* print timestamps in nanoseconds */ +} else { + /* print timestamps in microseconds */ +} +... +/* Print timestamps in microseconds */ +tep_clear_flag(tep, TEP_NSEC_OUTPUT); +... +-- +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-strerror.txt b/tools/lib/traceevent/Documentation/libtraceevent-strerror.txt new file mode 100644 index 000000000000..ee4062a00c9f --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-strerror.txt @@ -0,0 +1,85 @@ +libtraceevent(3) +================ + +NAME +---- +tep_strerror - Returns a string describing regular errno and tep error number. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +int *tep_strerror*(struct tep_handle pass:[*]_tep_, enum tep_errno _errnum_, char pass:[*]_buf_, size_t _buflen_); + +-- +DESCRIPTION +----------- +The _tep_strerror()_ function converts tep error number into a human +readable string. +The _tep_ argument is trace event parser context. The _errnum_ is a regular +errno, defined in errno.h, or a tep error number. The string, describing this +error number is copied in the _buf_ argument. The _buflen_ argument is +the size of the _buf_. + +It as a thread safe wrapper around strerror_r(). The library function has two +different behaviors - POSIX and GNU specific. The _tep_strerror()_ API always +behaves as the POSIX version - the error string is copied in the user supplied +buffer. + +RETURN VALUE +------------ +The _tep_strerror()_ function returns 0, if a valid _errnum_ is passed and the +string is copied into _buf_. If _errnum_ is not a valid error number, +-1 is returned and _buf_ is not modified. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +... +struct tep_handle *tep = tep_alloc(); +... +char buf[32]; +char *pool = calloc(1, 128); +if (tep == NULL) { + tep_strerror(tep, TEP_ERRNO__MEM_ALLOC_FAILED, buf, 32); + printf ("The pool is not initialized, %s", buf); +} +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent-tseq.txt b/tools/lib/traceevent/Documentation/libtraceevent-tseq.txt new file mode 100644 index 000000000000..8ac6aa174e12 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent-tseq.txt @@ -0,0 +1,158 @@ +libtraceevent(3) +================ + +NAME +---- +trace_seq_init, trace_seq_destroy, trace_seq_reset, trace_seq_terminate, +trace_seq_putc, trace_seq_puts, trace_seq_printf, trace_seq_vprintf, +trace_seq_do_fprintf, trace_seq_do_printf - +Initialize / destroy a trace sequence. + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* +*#include <trace-seq.h>* + +void *trace_seq_init*(struct trace_seq pass:[*]_s_); +void *trace_seq_destroy*(struct trace_seq pass:[*]_s_); +void *trace_seq_reset*(struct trace_seq pass:[*]_s_); +void *trace_seq_terminate*(struct trace_seq pass:[*]_s_); +int *trace_seq_putc*(struct trace_seq pass:[*]_s_, unsigned char _c_); +int *trace_seq_puts*(struct trace_seq pass:[*]_s_, const char pass:[*]_str_); +int *trace_seq_printf*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, _..._); +int *trace_seq_vprintf*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, va_list _args_); +int *trace_seq_do_printf*(struct trace_seq pass:[*]_s_); +int *trace_seq_do_fprintf*(struct trace_seq pass:[*]_s_, FILE pass:[*]_fp_); +-- + +DESCRIPTION +----------- +Trace sequences are used to allow a function to call several other functions +to create a string of data to use. + +The _trace_seq_init()_ function initializes the trace sequence _s_. + +The _trace_seq_destroy()_ function destroys the trace sequence _s_ and frees +all its resources that it had used. + +The _trace_seq_reset()_ function re-initializes the trace sequence _s_. All +characters already written in _s_ will be deleted. + +The _trace_seq_terminate()_ function terminates the trace sequence _s_. It puts +the null character pass:['\0'] at the end of the buffer. + +The _trace_seq_putc()_ function puts a single character _c_ in the trace +sequence _s_. + +The _trace_seq_puts()_ function puts a NULL terminated string _str_ in the +trace sequence _s_. + +The _trace_seq_printf()_ function puts a formated string _fmt _with +variable arguments _..._ in the trace sequence _s_. + +The _trace_seq_vprintf()_ function puts a formated string _fmt _with +list of arguments _args_ in the trace sequence _s_. + +The _trace_seq_do_printf()_ function prints the buffer of trace sequence _s_ to +the standard output stdout. + +The _trace_seq_do_fprintf()_ function prints the buffer of trace sequence _s_ +to the given file _fp_. + +RETURN VALUE +------------ +Both _trace_seq_putc()_ and _trace_seq_puts()_ functions return the number of +characters put in the trace sequence, or 0 in case of an error + +Both _trace_seq_printf()_ and _trace_seq_vprintf()_ functions return 0 if the +trace oversizes the buffer's free space, the number of characters printed, or +a negative value in case of an error. + +Both _trace_seq_do_printf()_ and _trace_seq_do_fprintf()_ functions return the +number of printed characters, or -1 in case of an error. + +EXAMPLE +------- +[source,c] +-- +#include <event-parse.h> +#include <trace-seq.h> +... +struct trace_seq seq; +trace_seq_init(&seq); +... +void foo_seq_print(struct trace_seq *tseq, char *format, ...) +{ + va_list ap; + va_start(ap, format); + if (trace_seq_vprintf(tseq, format, ap) <= 0) { + /* Failed to print in the trace sequence */ + } + va_end(ap); +} + +trace_seq_reset(&seq); + +char *str = " MAN page example"; +if (trace_seq_puts(&seq, str) != strlen(str)) { + /* Failed to put str in the trace sequence */ +} +if (trace_seq_putc(&seq, ':') != 1) { + /* Failed to put ':' in the trace sequence */ +} +if (trace_seq_printf(&seq, " trace sequence: %d", 1) <= 0) { + /* Failed to print in the trace sequence */ +} +foo_seq_print( &seq, " %d\n", 2); + +trace_seq_terminate(&seq); +... + +if (trace_seq_do_printf(&seq) < 0 ) { + /* Failed to print the sequence buffer to the standard output */ +} +FILE *fp = fopen("trace.txt", "w"); +if (trace_seq_do_fprintf(&seq, fp) < 0 ) [ + /* Failed to print the sequence buffer to the trace.txt file */ +} + +trace_seq_destroy(&seq); +... +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*trace-seq.h* + Header file to include in order to have access to trace sequences related APIs. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_libtraceevent(3)_, _trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/libtraceevent.txt b/tools/lib/traceevent/Documentation/libtraceevent.txt new file mode 100644 index 000000000000..fbd977b47de1 --- /dev/null +++ b/tools/lib/traceevent/Documentation/libtraceevent.txt @@ -0,0 +1,203 @@ +libtraceevent(3) +================ + +NAME +---- +libtraceevent - Linux kernel trace event library + +SYNOPSIS +-------- +[verse] +-- +*#include <event-parse.h>* + +Management of tep handler data structure and access of its members: + struct tep_handle pass:[*]*tep_alloc*(void); + void *tep_free*(struct tep_handle pass:[*]_tep_); + void *tep_ref*(struct tep_handle pass:[*]_tep_); + void *tep_unref*(struct tep_handle pass:[*]_tep_); + int *tep_ref_get*(struct tep_handle pass:[*]_tep_); + void *tep_set_flag*(struct tep_handle pass:[*]_tep_, enum tep_flag _flag_); + void *tep_clear_flag*(struct tep_handle pass:[*]_tep_, enum tep_flag _flag_); + bool *tep_test_flag*(struct tep_handle pass:[*]_tep_, enum tep_flag _flags_); + int *tep_get_cpus*(struct tep_handle pass:[*]_tep_); + void *tep_set_cpus*(struct tep_handle pass:[*]_tep_, int _cpus_); + int *tep_get_long_size*(strucqt tep_handle pass:[*]_tep_); + void *tep_set_long_size*(struct tep_handle pass:[*]_tep_, int _long_size_); + int *tep_get_page_size*(struct tep_handle pass:[*]_tep_); + void *tep_set_page_size*(struct tep_handle pass:[*]_tep_, int _page_size_); + bool *tep_is_latency_format*(struct tep_handle pass:[*]_tep_); + void *tep_set_latency_format*(struct tep_handle pass:[*]_tep_, int _lat_); + int *tep_get_header_page_size*(struct tep_handle pass:[*]_tep_); + int *tep_get_header_timestamp_size*(struct tep_handle pass:[*]_tep_); + bool *tep_is_old_format*(struct tep_handle pass:[*]_tep_); + int *tep_strerror*(struct tep_handle pass:[*]_tep_, enum tep_errno _errnum_, char pass:[*]_buf_, size_t _buflen_); + +Register / unregister APIs: + int *tep_register_trace_clock*(struct tep_handle pass:[*]_tep_, const char pass:[*]_trace_clock_); + int *tep_register_function*(struct tep_handle pass:[*]_tep_, char pass:[*]_name_, unsigned long long _addr_, char pass:[*]_mod_); + int *tep_register_event_handler*(struct tep_handle pass:[*]_tep_, int _id_, const char pass:[*]_sys_name_, const char pass:[*]_event_name_, tep_event_handler_func _func_, void pass:[*]_context_); + int *tep_unregister_event_handler*(struct tep_handle pass:[*]tep, int id, const char pass:[*]sys_name, const char pass:[*]event_name, tep_event_handler_func func, void pass:[*]_context_); + int *tep_register_print_string*(struct tep_handle pass:[*]_tep_, const char pass:[*]_fmt_, unsigned long long _addr_); + int *tep_register_print_function*(struct tep_handle pass:[*]_tep_, tep_func_handler _func_, enum tep_func_arg_type _ret_type_, char pass:[*]_name_, _..._); + int *tep_unregister_print_function*(struct tep_handle pass:[*]_tep_, tep_func_handler _func_, char pass:[*]_name_); + +Plugins management: + struct tep_plugin_list pass:[*]*tep_load_plugins*(struct tep_handle pass:[*]_tep_); + void *tep_unload_plugins*(struct tep_plugin_list pass:[*]_plugin_list_, struct tep_handle pass:[*]_tep_); + char pass:[*]pass:[*]*tep_plugin_list_options*(void); + void *tep_plugin_free_options_list*(char pass:[*]pass:[*]_list_); + int *tep_plugin_add_options*(const char pass:[*]_name_, struct tep_plugin_option pass:[*]_options_); + void *tep_plugin_remove_options*(struct tep_plugin_option pass:[*]_options_); + void *tep_print_plugins*(struct trace_seq pass:[*]_s_, const char pass:[*]_prefix_, const char pass:[*]_suffix_, const struct tep_plugin_list pass:[*]_list_); + +Event related APIs: + struct tep_event pass:[*]*tep_get_event*(struct tep_handle pass:[*]_tep_, int _index_); + struct tep_event pass:[*]*tep_get_first_event*(struct tep_handle pass:[*]_tep_); + int *tep_get_events_count*(struct tep_handle pass:[*]_tep_); + struct tep_event pass:[*]pass:[*]*tep_list_events*(struct tep_handle pass:[*]_tep_, enum tep_event_sort_type _sort_type_); + struct tep_event pass:[*]pass:[*]*tep_list_events_copy*(struct tep_handle pass:[*]_tep_, enum tep_event_sort_type _sort_type_); + +Event printing: + void *tep_print_event*(struct tep_handle pass:[*]_tep_, struct trace_seq pass:[*]_s_, struct tep_record pass:[*]_record_, bool _use_trace_clock_); + void *tep_print_event_data*(struct tep_handle pass:[*]_tep_, struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, struct tep_record pass:[*]_record_); + void *tep_event_info*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, struct tep_record pass:[*]_record_); + void *tep_print_event_task*(struct tep_handle pass:[*]_tep_, struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, struct tep_record pass:[*]_record_); + void *tep_print_event_time*(struct tep_handle pass:[*]_tep_, struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, struct tep_record pass:[*]record, bool _use_trace_clock_); + void *tep_set_print_raw*(struct tep_handle pass:[*]_tep_, int _print_raw_); + +Event finding: + struct tep_event pass:[*]*tep_find_event*(struct tep_handle pass:[*]_tep_, int _id_); + struct tep_event pass:[*]*tep_find_event_by_name*(struct tep_handle pass:[*]_tep_, const char pass:[*]_sys_, const char pass:[*]_name_); + struct tep_event pass:[*]*tep_find_event_by_record*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_record_); + +Parsing of event files: + int *tep_parse_header_page*(struct tep_handle pass:[*]_tep_, char pass:[*]_buf_, unsigned long _size_, int _long_size_); + enum tep_errno *tep_parse_event*(struct tep_handle pass:[*]_tep_, const char pass:[*]_buf_, unsigned long _size_, const char pass:[*]_sys_); + enum tep_errno *tep_parse_format*(struct tep_handle pass:[*]_tep_, struct tep_event pass:[*]pass:[*]_eventp_, const char pass:[*]_buf_, unsigned long _size_, const char pass:[*]_sys_); + +APIs related to fields from event's format files: + struct tep_format_field pass:[*]pass:[*]*tep_event_common_fields*(struct tep_event pass:[*]_event_); + struct tep_format_field pass:[*]pass:[*]*tep_event_fields*(struct tep_event pass:[*]_event_); + void pass:[*]*tep_get_field_raw*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, int pass:[*]_len_, int _err_); + int *tep_get_field_val*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, unsigned long long pass:[*]_val_, int _err_); + int *tep_get_common_field_val*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, unsigned long long pass:[*]_val_, int _err_); + int *tep_get_any_field_val*(struct trace_seq pass:[*]_s_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, unsigned long long pass:[*]_val_, int _err_); + int *tep_read_number_field*(struct tep_format_field pass:[*]_field_, const void pass:[*]_data_, unsigned long long pass:[*]_value_); + +Event fields printing: + void *tep_print_field*(struct trace_seq pass:[*]_s_, void pass:[*]_data_, struct tep_format_field pass:[*]_field_); + void *tep_print_fields*(struct trace_seq pass:[*]_s_, void pass:[*]_data_, int _size_, struct tep_event pass:[*]_event_); + int *tep_print_num_field*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, int _err_); + int *tep_print_func_field*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, struct tep_event pass:[*]_event_, const char pass:[*]_name_, struct tep_record pass:[*]_record_, int _err_); + +Event fields finding: + struct tep_format_field pass:[*]*tep_find_common_field*(struct tep_event pass:[*]_event_, const char pass:[*]_name_); + struct tep_format_field pass:[*]*tep_find_field*(struct tep_event_ormat pass:[*]_event_, const char pass:[*]_name_); + struct tep_format_field pass:[*]*tep_find_any_field*(struct tep_event pass:[*]_event_, const char pass:[*]_name_); + +Functions resolver: + int *tep_set_function_resolver*(struct tep_handle pass:[*]_tep_, tep_func_resolver_t pass:[*]_func_, void pass:[*]_priv_); + void *tep_reset_function_resolver*(struct tep_handle pass:[*]_tep_); + const char pass:[*]*tep_find_function*(struct tep_handle pass:[*]_tep_, unsigned long long _addr_); + unsigned long long *tep_find_function_address*(struct tep_handle pass:[*]_tep_, unsigned long long _addr_); + +Filter management: + struct tep_event_filter pass:[*]*tep_filter_alloc*(struct tep_handle pass:[*]_tep_); + enum tep_errno *tep_filter_add_filter_str*(struct tep_event_filter pass:[*]_filter_, const char pass:[*]_filter_str_); + enum tep_errno *tep_filter_match*(struct tep_event_filter pass:[*]_filter_, struct tep_record pass:[*]_record_); + int *tep_filter_strerror*(struct tep_event_filter pass:[*]_filter_, enum tep_errno _err_, char pass:[*]buf, size_t _buflen_); + int *tep_event_filtered*(struct tep_event_filter pass:[*]_filter_, int _event_id_); + void *tep_filter_reset*(struct tep_event_filter pass:[*]_filter_); + void *tep_filter_free*(struct tep_event_filter pass:[*]_filter_); + char pass:[*]*tep_filter_make_string*(struct tep_event_filter pass:[*]_filter_, int _event_id_); + int *tep_filter_remove_event*(struct tep_event_filter pass:[*]_filter_, int _event_id_); + int *tep_filter_copy*(struct tep_event_filter pass:[*]_dest_, struct tep_event_filter pass:[*]_source_); + int *tep_filter_compare*(struct tep_event_filter pass:[*]_filter1_, struct tep_event_filter pass:[*]_filter2_); + +Parsing various data from the records: + void *tep_data_latency_format*(struct tep_handle pass:[*]_tep_, struct trace_seq pass:[*]_s_, struct tep_record pass:[*]_record_); + int *tep_data_type*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); + int *tep_data_pid*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); + int *tep_data_preempt_count*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); + int *tep_data_flags*(struct tep_handle pass:[*]_tep_, struct tep_record pass:[*]_rec_); + +Command and task related APIs: + const char pass:[*]*tep_data_comm_from_pid*(struct tep_handle pass:[*]_tep_, int _pid_); + struct cmdline pass:[*]*tep_data_pid_from_comm*(struct tep_handle pass:[*]_tep_, const char pass:[*]_comm_, struct cmdline pass:[*]_next_); + int *tep_register_comm*(struct tep_handle pass:[*]_tep_, const char pass:[*]_comm_, int _pid_); + int *tep_override_comm*(struct tep_handle pass:[*]_tep_, const char pass:[*]_comm_, int _pid_); + bool *tep_is_pid_registered*(struct tep_handle pass:[*]_tep_, int _pid_); + int *tep_cmdline_pid*(struct tep_handle pass:[*]_tep_, struct cmdline pass:[*]_cmdline_); + +Endian related APIs: + int *tep_is_bigendian*(void); + unsigned long long *tep_read_number*(struct tep_handle pass:[*]_tep_, const void pass:[*]_ptr_, int _size_); + bool *tep_is_file_bigendian*(struct tep_handle pass:[*]_tep_); + void *tep_set_file_bigendian*(struct tep_handle pass:[*]_tep_, enum tep_endian _endian_); + bool *tep_is_local_bigendian*(struct tep_handle pass:[*]_tep_); + void *tep_set_local_bigendian*(struct tep_handle pass:[*]_tep_, enum tep_endian _endian_); + +Trace sequences: +*#include <trace-seq.h>* + void *trace_seq_init*(struct trace_seq pass:[*]_s_); + void *trace_seq_reset*(struct trace_seq pass:[*]_s_); + void *trace_seq_destroy*(struct trace_seq pass:[*]_s_); + int *trace_seq_printf*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, ...); + int *trace_seq_vprintf*(struct trace_seq pass:[*]_s_, const char pass:[*]_fmt_, va_list _args_); + int *trace_seq_puts*(struct trace_seq pass:[*]_s_, const char pass:[*]_str_); + int *trace_seq_putc*(struct trace_seq pass:[*]_s_, unsigned char _c_); + void *trace_seq_terminate*(struct trace_seq pass:[*]_s_); + int *trace_seq_do_fprintf*(struct trace_seq pass:[*]_s_, FILE pass:[*]_fp_); + int *trace_seq_do_printf*(struct trace_seq pass:[*]_s_); +-- + +DESCRIPTION +----------- +The libtraceevent(3) library provides APIs to access kernel tracepoint events, +located in the tracefs file system under the events directory. + +ENVIRONMENT +----------- +[verse] +-- +TRACEEVENT_PLUGIN_DIR + Additional plugin directory. All shared object files, located in this directory will be loaded as traceevent plugins. +-- + +FILES +----- +[verse] +-- +*event-parse.h* + Header file to include in order to have access to the library APIs. +*trace-seq.h* + Header file to include in order to have access to trace sequences related APIs. + Trace sequences are used to allow a function to call several other functions + to create a string of data to use. +*-ltraceevent* + Linker switch to add when building a program that uses the library. +-- + +SEE ALSO +-------- +_trace-cmd(1)_ + +AUTHOR +------ +[verse] +-- +*Steven Rostedt* <rostedt@goodmis.org>, author of *libtraceevent*. +*Tzvetomir Stoyanov* <tz.stoyanov@gmail.com>, author of this man page. +-- +REPORTING BUGS +-------------- +Report bugs to <linux-trace-devel@vger.kernel.org> + +LICENSE +------- +libtraceevent is Free Software licensed under the GNU LGPL 2.1 + +RESOURCES +--------- +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/Documentation/manpage-1.72.xsl b/tools/lib/traceevent/Documentation/manpage-1.72.xsl new file mode 100644 index 000000000000..b4d315cb8c47 --- /dev/null +++ b/tools/lib/traceevent/Documentation/manpage-1.72.xsl @@ -0,0 +1,14 @@ +<!-- manpage-1.72.xsl: + special settings for manpages rendered from asciidoc+docbook + handles peculiarities in docbook-xsl 1.72.0 --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<xsl:import href="manpage-base.xsl"/> + +<!-- these are the special values for the roff control characters + needed for docbook-xsl 1.72.0 --> +<xsl:param name="git.docbook.backslash">▓</xsl:param> +<xsl:param name="git.docbook.dot" >⌂</xsl:param> + +</xsl:stylesheet> diff --git a/tools/lib/traceevent/Documentation/manpage-base.xsl b/tools/lib/traceevent/Documentation/manpage-base.xsl new file mode 100644 index 000000000000..a264fa616093 --- /dev/null +++ b/tools/lib/traceevent/Documentation/manpage-base.xsl @@ -0,0 +1,35 @@ +<!-- manpage-base.xsl: + special formatting for manpages rendered from asciidoc+docbook --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<!-- these params silence some output from xmlto --> +<xsl:param name="man.output.quietly" select="1"/> +<xsl:param name="refentry.meta.get.quietly" select="1"/> + +<!-- convert asciidoc callouts to man page format; + git.docbook.backslash and git.docbook.dot params + must be supplied by another XSL file or other means --> +<xsl:template match="co"> + <xsl:value-of select="concat( + $git.docbook.backslash,'fB(', + substring-after(@id,'-'),')', + $git.docbook.backslash,'fR')"/> +</xsl:template> +<xsl:template match="calloutlist"> + <xsl:value-of select="$git.docbook.dot"/> + <xsl:text>sp </xsl:text> + <xsl:apply-templates/> + <xsl:text> </xsl:text> +</xsl:template> +<xsl:template match="callout"> + <xsl:value-of select="concat( + $git.docbook.backslash,'fB', + substring-after(@arearefs,'-'), + '. ',$git.docbook.backslash,'fR')"/> + <xsl:apply-templates/> + <xsl:value-of select="$git.docbook.dot"/> + <xsl:text>br </xsl:text> +</xsl:template> + +</xsl:stylesheet> diff --git a/tools/lib/traceevent/Documentation/manpage-bold-literal.xsl b/tools/lib/traceevent/Documentation/manpage-bold-literal.xsl new file mode 100644 index 000000000000..608eb5df6281 --- /dev/null +++ b/tools/lib/traceevent/Documentation/manpage-bold-literal.xsl @@ -0,0 +1,17 @@ +<!-- manpage-bold-literal.xsl: + special formatting for manpages rendered from asciidoc+docbook --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<!-- render literal text as bold (instead of plain or monospace); + this makes literal text easier to distinguish in manpages + viewed on a tty --> +<xsl:template match="literal"> + <xsl:value-of select="$git.docbook.backslash"/> + <xsl:text>fB</xsl:text> + <xsl:apply-templates/> + <xsl:value-of select="$git.docbook.backslash"/> + <xsl:text>fR</xsl:text> +</xsl:template> + +</xsl:stylesheet> diff --git a/tools/lib/traceevent/Documentation/manpage-normal.xsl b/tools/lib/traceevent/Documentation/manpage-normal.xsl new file mode 100644 index 000000000000..a48f5b11f3dc --- /dev/null +++ b/tools/lib/traceevent/Documentation/manpage-normal.xsl @@ -0,0 +1,13 @@ +<!-- manpage-normal.xsl: + special settings for manpages rendered from asciidoc+docbook + handles anything we want to keep away from docbook-xsl 1.72.0 --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<xsl:import href="manpage-base.xsl"/> + +<!-- these are the normal values for the roff control characters --> +<xsl:param name="git.docbook.backslash">\</xsl:param> +<xsl:param name="git.docbook.dot" >.</xsl:param> + +</xsl:stylesheet> diff --git a/tools/lib/traceevent/Documentation/manpage-suppress-sp.xsl b/tools/lib/traceevent/Documentation/manpage-suppress-sp.xsl new file mode 100644 index 000000000000..a63c7632a87d --- /dev/null +++ b/tools/lib/traceevent/Documentation/manpage-suppress-sp.xsl @@ -0,0 +1,21 @@ +<!-- manpage-suppress-sp.xsl: + special settings for manpages rendered from asciidoc+docbook + handles erroneous, inline .sp in manpage output of some + versions of docbook-xsl --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<!-- attempt to work around spurious .sp at the tail of the line + that some versions of docbook stylesheets seem to add --> +<xsl:template match="simpara"> + <xsl:variable name="content"> + <xsl:apply-templates/> + </xsl:variable> + <xsl:value-of select="normalize-space($content)"/> + <xsl:if test="not(ancestor::authorblurb) and + not(ancestor::personblurb)"> + <xsl:text> </xsl:text> + </xsl:if> +</xsl:template> + +</xsl:stylesheet> diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile index 941761d9923d..3292c290654f 100644 --- a/tools/lib/traceevent/Makefile +++ b/tools/lib/traceevent/Makefile @@ -50,9 +50,13 @@ man_dir = $(prefix)/share/man man_dir_SQ = '$(subst ','\'',$(man_dir))' pkgconfig_dir ?= $(word 1,$(shell $(PKG_CONFIG) \ --variable pc_path pkg-config | tr ":" " ")) +includedir_relative = traceevent +includedir = $(prefix)/include/$(includedir_relative) +includedir_SQ = '$(subst ','\'',$(includedir))' export man_dir man_dir_SQ INSTALL export DESTDIR DESTDIR_SQ +export EVENT_PARSE_VERSION set_plugin_dir := 1 @@ -279,6 +283,8 @@ define do_install_pkgconfig_file cp -f ${PKG_CONFIG_FILE}.template ${PKG_CONFIG_FILE}; \ sed -i "s|INSTALL_PREFIX|${1}|g" ${PKG_CONFIG_FILE}; \ sed -i "s|LIB_VERSION|${EVENT_PARSE_VERSION}|g" ${PKG_CONFIG_FILE}; \ + sed -i "s|LIB_DIR|${libdir}|g" ${PKG_CONFIG_FILE}; \ + sed -i "s|HEADER_DIR|$(includedir)|g" ${PKG_CONFIG_FILE}; \ $(call do_install,$(PKG_CONFIG_FILE),$(pkgconfig_dir),644); \ else \ (echo Failed to locate pkg-config directory) 1>&2; \ @@ -300,10 +306,10 @@ install_pkgconfig: install_headers: $(call QUIET_INSTALL, headers) \ - $(call do_install,event-parse.h,$(prefix)/include/traceevent,644); \ - $(call do_install,event-utils.h,$(prefix)/include/traceevent,644); \ - $(call do_install,trace-seq.h,$(prefix)/include/traceevent,644); \ - $(call do_install,kbuffer.h,$(prefix)/include/traceevent,644) + $(call do_install,event-parse.h,$(DESTDIR)$(includedir_SQ),644); \ + $(call do_install,event-utils.h,$(DESTDIR)$(includedir_SQ),644); \ + $(call do_install,trace-seq.h,$(DESTDIR)$(includedir_SQ),644); \ + $(call do_install,kbuffer.h,$(DESTDIR)$(includedir_SQ),644) install: install_lib @@ -313,6 +319,38 @@ clean: $(RM) TRACEEVENT-CFLAGS tags TAGS; \ $(RM) $(PKG_CONFIG_FILE) +PHONY += doc +doc: + $(call descend,Documentation) + +PHONY += doc-clean +doc-clean: + $(call descend,Documentation,clean) + +PHONY += doc-install +doc-install: + $(call descend,Documentation,install) + +PHONY += doc-uninstall +doc-uninstall: + $(call descend,Documentation,uninstall) + +PHONY += help +help: + @echo 'Possible targets:' + @echo'' + @echo ' all - default, compile the library and the'\ + 'plugins' + @echo ' plugins - compile the plugins' + @echo ' install - install the library, the plugins,'\ + 'the header and pkgconfig files' + @echo ' clean - clean the library and the plugins object files' + @echo ' doc - compile the documentation files - man'\ + 'and html pages, in the Documentation directory' + @echo ' doc-clean - clean the documentation files' + @echo ' doc-install - install the man pages' + @echo ' doc-uninstall - uninstall the man pages' + @echo'' PHONY += force plugins force: diff --git a/tools/lib/traceevent/event-parse-api.c b/tools/lib/traceevent/event-parse-api.c index d463761a58f4..988587840c80 100644 --- a/tools/lib/traceevent/event-parse-api.c +++ b/tools/lib/traceevent/event-parse-api.c @@ -9,6 +9,22 @@ #include "event-utils.h" /** + * tep_get_event - returns the event with the given index + * @tep: a handle to the tep_handle + * @index: index of the requested event, in the range 0 .. nr_events + * + * This returns pointer to the element of the events array with the given index + * If @tep is NULL, or @index is not in the range 0 .. nr_events, NULL is returned. + */ +struct tep_event *tep_get_event(struct tep_handle *tep, int index) +{ + if (tep && tep->events && index < tep->nr_events) + return tep->events[index]; + + return NULL; +} + +/** * tep_get_first_event - returns the first event in the events array * @tep: a handle to the tep_handle * @@ -17,10 +33,7 @@ */ struct tep_event *tep_get_first_event(struct tep_handle *tep) { - if (tep && tep->events) - return tep->events[0]; - - return NULL; + return tep_get_event(tep, 0); } /** @@ -32,7 +45,7 @@ struct tep_event *tep_get_first_event(struct tep_handle *tep) */ int tep_get_events_count(struct tep_handle *tep) { - if(tep) + if (tep) return tep->nr_events; return 0; } @@ -43,19 +56,47 @@ int tep_get_events_count(struct tep_handle *tep) * @flag: flag, or combination of flags to be set * can be any combination from enum tep_flag * - * This sets a flag or mbination of flags from enum tep_flag - */ + * This sets a flag or combination of flags from enum tep_flag + */ void tep_set_flag(struct tep_handle *tep, int flag) { - if(tep) + if (tep) tep->flags |= flag; } -unsigned short tep_data2host2(struct tep_handle *pevent, unsigned short data) +/** + * tep_clear_flag - clear event parser flag + * @tep: a handle to the tep_handle + * @flag: flag to be cleared + * + * This clears a tep flag + */ +void tep_clear_flag(struct tep_handle *tep, enum tep_flag flag) +{ + if (tep) + tep->flags &= ~flag; +} + +/** + * tep_test_flag - check the state of event parser flag + * @tep: a handle to the tep_handle + * @flag: flag to be checked + * + * This returns the state of the requested tep flag. + * Returns: true if the flag is set, false otherwise. + */ +bool tep_test_flag(struct tep_handle *tep, enum tep_flag flag) +{ + if (tep) + return tep->flags & flag; + return false; +} + +unsigned short tep_data2host2(struct tep_handle *tep, unsigned short data) { unsigned short swap; - if (!pevent || pevent->host_bigendian == pevent->file_bigendian) + if (!tep || tep->host_bigendian == tep->file_bigendian) return data; swap = ((data & 0xffULL) << 8) | @@ -64,11 +105,11 @@ unsigned short tep_data2host2(struct tep_handle *pevent, unsigned short data) return swap; } -unsigned int tep_data2host4(struct tep_handle *pevent, unsigned int data) +unsigned int tep_data2host4(struct tep_handle *tep, unsigned int data) { unsigned int swap; - if (!pevent || pevent->host_bigendian == pevent->file_bigendian) + if (!tep || tep->host_bigendian == tep->file_bigendian) return data; swap = ((data & 0xffULL) << 24) | @@ -80,11 +121,11 @@ unsigned int tep_data2host4(struct tep_handle *pevent, unsigned int data) } unsigned long long -tep_data2host8(struct tep_handle *pevent, unsigned long long data) +tep_data2host8(struct tep_handle *tep, unsigned long long data) { unsigned long long swap; - if (!pevent || pevent->host_bigendian == pevent->file_bigendian) + if (!tep || tep->host_bigendian == tep->file_bigendian) return data; swap = ((data & 0xffULL) << 56) | @@ -101,175 +142,232 @@ tep_data2host8(struct tep_handle *pevent, unsigned long long data) /** * tep_get_header_page_size - get size of the header page - * @pevent: a handle to the tep_handle + * @tep: a handle to the tep_handle * * This returns size of the header page - * If @pevent is NULL, 0 is returned. + * If @tep is NULL, 0 is returned. + */ +int tep_get_header_page_size(struct tep_handle *tep) +{ + if (tep) + return tep->header_page_size_size; + return 0; +} + +/** + * tep_get_header_timestamp_size - get size of the timestamp in the header page + * @tep: a handle to the tep_handle + * + * This returns size of the timestamp in the header page + * If @tep is NULL, 0 is returned. */ -int tep_get_header_page_size(struct tep_handle *pevent) +int tep_get_header_timestamp_size(struct tep_handle *tep) { - if(pevent) - return pevent->header_page_size_size; + if (tep) + return tep->header_page_ts_size; return 0; } /** * tep_get_cpus - get the number of CPUs - * @pevent: a handle to the tep_handle + * @tep: a handle to the tep_handle * * This returns the number of CPUs - * If @pevent is NULL, 0 is returned. + * If @tep is NULL, 0 is returned. */ -int tep_get_cpus(struct tep_handle *pevent) +int tep_get_cpus(struct tep_handle *tep) { - if(pevent) - return pevent->cpus; + if (tep) + return tep->cpus; return 0; } /** * tep_set_cpus - set the number of CPUs - * @pevent: a handle to the tep_handle + * @tep: a handle to the tep_handle * * This sets the number of CPUs */ -void tep_set_cpus(struct tep_handle *pevent, int cpus) +void tep_set_cpus(struct tep_handle *tep, int cpus) { - if(pevent) - pevent->cpus = cpus; + if (tep) + tep->cpus = cpus; } /** - * tep_get_long_size - get the size of a long integer on the current machine - * @pevent: a handle to the tep_handle + * tep_get_long_size - get the size of a long integer on the traced machine + * @tep: a handle to the tep_handle * - * This returns the size of a long integer on the current machine - * If @pevent is NULL, 0 is returned. + * This returns the size of a long integer on the traced machine + * If @tep is NULL, 0 is returned. */ -int tep_get_long_size(struct tep_handle *pevent) +int tep_get_long_size(struct tep_handle *tep) { - if(pevent) - return pevent->long_size; + if (tep) + return tep->long_size; return 0; } /** - * tep_set_long_size - set the size of a long integer on the current machine - * @pevent: a handle to the tep_handle + * tep_set_long_size - set the size of a long integer on the traced machine + * @tep: a handle to the tep_handle * @size: size, in bytes, of a long integer * - * This sets the size of a long integer on the current machine + * This sets the size of a long integer on the traced machine */ -void tep_set_long_size(struct tep_handle *pevent, int long_size) +void tep_set_long_size(struct tep_handle *tep, int long_size) { - if(pevent) - pevent->long_size = long_size; + if (tep) + tep->long_size = long_size; } /** - * tep_get_page_size - get the size of a memory page on the current machine - * @pevent: a handle to the tep_handle + * tep_get_page_size - get the size of a memory page on the traced machine + * @tep: a handle to the tep_handle * - * This returns the size of a memory page on the current machine - * If @pevent is NULL, 0 is returned. + * This returns the size of a memory page on the traced machine + * If @tep is NULL, 0 is returned. */ -int tep_get_page_size(struct tep_handle *pevent) +int tep_get_page_size(struct tep_handle *tep) { - if(pevent) - return pevent->page_size; + if (tep) + return tep->page_size; return 0; } /** - * tep_set_page_size - set the size of a memory page on the current machine - * @pevent: a handle to the tep_handle + * tep_set_page_size - set the size of a memory page on the traced machine + * @tep: a handle to the tep_handle * @_page_size: size of a memory page, in bytes * - * This sets the size of a memory page on the current machine + * This sets the size of a memory page on the traced machine */ -void tep_set_page_size(struct tep_handle *pevent, int _page_size) +void tep_set_page_size(struct tep_handle *tep, int _page_size) { - if(pevent) - pevent->page_size = _page_size; + if (tep) + tep->page_size = _page_size; } /** - * tep_file_bigendian - get if the file is in big endian order - * @pevent: a handle to the tep_handle + * tep_is_file_bigendian - return the endian of the file + * @tep: a handle to the tep_handle * - * This returns if the file is in big endian order - * If @pevent is NULL, 0 is returned. + * This returns true if the file is in big endian order + * If @tep is NULL, false is returned. */ -int tep_file_bigendian(struct tep_handle *pevent) +bool tep_is_file_bigendian(struct tep_handle *tep) { - if(pevent) - return pevent->file_bigendian; - return 0; + if (tep) + return (tep->file_bigendian == TEP_BIG_ENDIAN); + return false; } /** * tep_set_file_bigendian - set if the file is in big endian order - * @pevent: a handle to the tep_handle + * @tep: a handle to the tep_handle * @endian: non zero, if the file is in big endian order * * This sets if the file is in big endian order */ -void tep_set_file_bigendian(struct tep_handle *pevent, enum tep_endian endian) +void tep_set_file_bigendian(struct tep_handle *tep, enum tep_endian endian) { - if(pevent) - pevent->file_bigendian = endian; + if (tep) + tep->file_bigendian = endian; } /** - * tep_is_host_bigendian - get if the order of the current host is big endian - * @pevent: a handle to the tep_handle + * tep_is_local_bigendian - return the endian of the saved local machine + * @tep: a handle to the tep_handle * - * This gets if the order of the current host is big endian - * If @pevent is NULL, 0 is returned. + * This returns true if the saved local machine in @tep is big endian. + * If @tep is NULL, false is returned. */ -int tep_is_host_bigendian(struct tep_handle *pevent) +bool tep_is_local_bigendian(struct tep_handle *tep) { - if(pevent) - return pevent->host_bigendian; + if (tep) + return (tep->host_bigendian == TEP_BIG_ENDIAN); return 0; } /** - * tep_set_host_bigendian - set the order of the local host - * @pevent: a handle to the tep_handle + * tep_set_local_bigendian - set the stored local machine endian order + * @tep: a handle to the tep_handle * @endian: non zero, if the local host has big endian order * - * This sets the order of the local host + * This sets the endian order for the local machine. */ -void tep_set_host_bigendian(struct tep_handle *pevent, enum tep_endian endian) +void tep_set_local_bigendian(struct tep_handle *tep, enum tep_endian endian) { - if(pevent) - pevent->host_bigendian = endian; + if (tep) + tep->host_bigendian = endian; } /** * tep_is_latency_format - get if the latency output format is configured - * @pevent: a handle to the tep_handle + * @tep: a handle to the tep_handle * - * This gets if the latency output format is configured - * If @pevent is NULL, 0 is returned. + * This returns true if the latency output format is configured + * If @tep is NULL, false is returned. */ -int tep_is_latency_format(struct tep_handle *pevent) +bool tep_is_latency_format(struct tep_handle *tep) { - if(pevent) - return pevent->latency_format; - return 0; + if (tep) + return (tep->latency_format); + return false; } /** * tep_set_latency_format - set the latency output format - * @pevent: a handle to the tep_handle + * @tep: a handle to the tep_handle * @lat: non zero for latency output format * * This sets the latency output format */ -void tep_set_latency_format(struct tep_handle *pevent, int lat) +void tep_set_latency_format(struct tep_handle *tep, int lat) +{ + if (tep) + tep->latency_format = lat; +} + +/** + * tep_is_old_format - get if an old kernel is used + * @tep: a handle to the tep_handle + * + * This returns true, if an old kernel is used to generate the tracing events or + * false if a new kernel is used. Old kernels did not have header page info. + * If @tep is NULL, false is returned. + */ +bool tep_is_old_format(struct tep_handle *tep) +{ + if (tep) + return tep->old_format; + return false; +} + +/** + * tep_set_print_raw - set a flag to force print in raw format + * @tep: a handle to the tep_handle + * @print_raw: the new value of the print_raw flag + * + * This sets a flag to force print in raw format + */ +void tep_set_print_raw(struct tep_handle *tep, int print_raw) +{ + if (tep) + tep->print_raw = print_raw; +} + +/** + * tep_set_test_filters - set a flag to test a filter string + * @tep: a handle to the tep_handle + * @test_filters: the new value of the test_filters flag + * + * This sets a flag to test a filter string. If this flag is set, when + * tep_filter_add_filter_str() API as called,it will print the filter string + * instead of adding it. + */ +void tep_set_test_filters(struct tep_handle *tep, int test_filters) { - if(pevent) - pevent->latency_format = lat; + if (tep) + tep->test_filters = test_filters; } diff --git a/tools/lib/traceevent/event-parse-local.h b/tools/lib/traceevent/event-parse-local.h index 35833ee32d6c..09aa142f7fdd 100644 --- a/tools/lib/traceevent/event-parse-local.h +++ b/tools/lib/traceevent/event-parse-local.h @@ -92,8 +92,8 @@ struct tep_handle { void tep_free_event(struct tep_event *event); void tep_free_format_field(struct tep_format_field *field); -unsigned short tep_data2host2(struct tep_handle *pevent, unsigned short data); -unsigned int tep_data2host4(struct tep_handle *pevent, unsigned int data); -unsigned long long tep_data2host8(struct tep_handle *pevent, unsigned long long data); +unsigned short tep_data2host2(struct tep_handle *tep, unsigned short data); +unsigned int tep_data2host4(struct tep_handle *tep, unsigned int data); +unsigned long long tep_data2host8(struct tep_handle *tep, unsigned long long data); #endif /* _PARSE_EVENTS_INT_H */ diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 87494c7c619d..b36b536a9fcb 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -148,14 +148,14 @@ struct cmdline_list { int pid; }; -static int cmdline_init(struct tep_handle *pevent) +static int cmdline_init(struct tep_handle *tep) { - struct cmdline_list *cmdlist = pevent->cmdlist; + struct cmdline_list *cmdlist = tep->cmdlist; struct cmdline_list *item; struct tep_cmdline *cmdlines; int i; - cmdlines = malloc(sizeof(*cmdlines) * pevent->cmdline_count); + cmdlines = malloc(sizeof(*cmdlines) * tep->cmdline_count); if (!cmdlines) return -1; @@ -169,15 +169,15 @@ static int cmdline_init(struct tep_handle *pevent) free(item); } - qsort(cmdlines, pevent->cmdline_count, sizeof(*cmdlines), cmdline_cmp); + qsort(cmdlines, tep->cmdline_count, sizeof(*cmdlines), cmdline_cmp); - pevent->cmdlines = cmdlines; - pevent->cmdlist = NULL; + tep->cmdlines = cmdlines; + tep->cmdlist = NULL; return 0; } -static const char *find_cmdline(struct tep_handle *pevent, int pid) +static const char *find_cmdline(struct tep_handle *tep, int pid) { const struct tep_cmdline *comm; struct tep_cmdline key; @@ -185,13 +185,13 @@ static const char *find_cmdline(struct tep_handle *pevent, int pid) if (!pid) return "<idle>"; - if (!pevent->cmdlines && cmdline_init(pevent)) + if (!tep->cmdlines && cmdline_init(tep)) return "<not enough memory for cmdlines!>"; key.pid = pid; - comm = bsearch(&key, pevent->cmdlines, pevent->cmdline_count, - sizeof(*pevent->cmdlines), cmdline_cmp); + comm = bsearch(&key, tep->cmdlines, tep->cmdline_count, + sizeof(*tep->cmdlines), cmdline_cmp); if (comm) return comm->comm; @@ -199,32 +199,32 @@ static const char *find_cmdline(struct tep_handle *pevent, int pid) } /** - * tep_pid_is_registered - return if a pid has a cmdline registered - * @pevent: handle for the pevent + * tep_is_pid_registered - return if a pid has a cmdline registered + * @tep: a handle to the trace event parser context * @pid: The pid to check if it has a cmdline registered with. * - * Returns 1 if the pid has a cmdline mapped to it - * 0 otherwise. + * Returns true if the pid has a cmdline mapped to it + * false otherwise. */ -int tep_pid_is_registered(struct tep_handle *pevent, int pid) +bool tep_is_pid_registered(struct tep_handle *tep, int pid) { const struct tep_cmdline *comm; struct tep_cmdline key; if (!pid) - return 1; + return true; - if (!pevent->cmdlines && cmdline_init(pevent)) - return 0; + if (!tep->cmdlines && cmdline_init(tep)) + return false; key.pid = pid; - comm = bsearch(&key, pevent->cmdlines, pevent->cmdline_count, - sizeof(*pevent->cmdlines), cmdline_cmp); + comm = bsearch(&key, tep->cmdlines, tep->cmdline_count, + sizeof(*tep->cmdlines), cmdline_cmp); if (comm) - return 1; - return 0; + return true; + return false; } /* @@ -232,10 +232,10 @@ int tep_pid_is_registered(struct tep_handle *pevent, int pid) * we must add this pid. This is much slower than when cmdlines * are added before the array is initialized. */ -static int add_new_comm(struct tep_handle *pevent, +static int add_new_comm(struct tep_handle *tep, const char *comm, int pid, bool override) { - struct tep_cmdline *cmdlines = pevent->cmdlines; + struct tep_cmdline *cmdlines = tep->cmdlines; struct tep_cmdline *cmdline; struct tep_cmdline key; char *new_comm; @@ -246,8 +246,8 @@ static int add_new_comm(struct tep_handle *pevent, /* avoid duplicates */ key.pid = pid; - cmdline = bsearch(&key, pevent->cmdlines, pevent->cmdline_count, - sizeof(*pevent->cmdlines), cmdline_cmp); + cmdline = bsearch(&key, tep->cmdlines, tep->cmdline_count, + sizeof(*tep->cmdlines), cmdline_cmp); if (cmdline) { if (!override) { errno = EEXIST; @@ -264,37 +264,37 @@ static int add_new_comm(struct tep_handle *pevent, return 0; } - cmdlines = realloc(cmdlines, sizeof(*cmdlines) * (pevent->cmdline_count + 1)); + cmdlines = realloc(cmdlines, sizeof(*cmdlines) * (tep->cmdline_count + 1)); if (!cmdlines) { errno = ENOMEM; return -1; } - cmdlines[pevent->cmdline_count].comm = strdup(comm); - if (!cmdlines[pevent->cmdline_count].comm) { + cmdlines[tep->cmdline_count].comm = strdup(comm); + if (!cmdlines[tep->cmdline_count].comm) { free(cmdlines); errno = ENOMEM; return -1; } - cmdlines[pevent->cmdline_count].pid = pid; + cmdlines[tep->cmdline_count].pid = pid; - if (cmdlines[pevent->cmdline_count].comm) - pevent->cmdline_count++; + if (cmdlines[tep->cmdline_count].comm) + tep->cmdline_count++; - qsort(cmdlines, pevent->cmdline_count, sizeof(*cmdlines), cmdline_cmp); - pevent->cmdlines = cmdlines; + qsort(cmdlines, tep->cmdline_count, sizeof(*cmdlines), cmdline_cmp); + tep->cmdlines = cmdlines; return 0; } -static int _tep_register_comm(struct tep_handle *pevent, +static int _tep_register_comm(struct tep_handle *tep, const char *comm, int pid, bool override) { struct cmdline_list *item; - if (pevent->cmdlines) - return add_new_comm(pevent, comm, pid, override); + if (tep->cmdlines) + return add_new_comm(tep, comm, pid, override); item = malloc(sizeof(*item)); if (!item) @@ -309,17 +309,17 @@ static int _tep_register_comm(struct tep_handle *pevent, return -1; } item->pid = pid; - item->next = pevent->cmdlist; + item->next = tep->cmdlist; - pevent->cmdlist = item; - pevent->cmdline_count++; + tep->cmdlist = item; + tep->cmdline_count++; return 0; } /** * tep_register_comm - register a pid / comm mapping - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @comm: the command line to register * @pid: the pid to map the command line to * @@ -327,14 +327,14 @@ static int _tep_register_comm(struct tep_handle *pevent, * a given pid. The comm is duplicated. If a command with the same pid * already exist, -1 is returned and errno is set to EEXIST */ -int tep_register_comm(struct tep_handle *pevent, const char *comm, int pid) +int tep_register_comm(struct tep_handle *tep, const char *comm, int pid) { - return _tep_register_comm(pevent, comm, pid, false); + return _tep_register_comm(tep, comm, pid, false); } /** * tep_override_comm - register a pid / comm mapping - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @comm: the command line to register * @pid: the pid to map the command line to * @@ -342,19 +342,19 @@ int tep_register_comm(struct tep_handle *pevent, const char *comm, int pid) * a given pid. The comm is duplicated. If a command with the same pid * already exist, the command string is udapted with the new one */ -int tep_override_comm(struct tep_handle *pevent, const char *comm, int pid) +int tep_override_comm(struct tep_handle *tep, const char *comm, int pid) { - if (!pevent->cmdlines && cmdline_init(pevent)) { + if (!tep->cmdlines && cmdline_init(tep)) { errno = ENOMEM; return -1; } - return _tep_register_comm(pevent, comm, pid, true); + return _tep_register_comm(tep, comm, pid, true); } -int tep_register_trace_clock(struct tep_handle *pevent, const char *trace_clock) +int tep_register_trace_clock(struct tep_handle *tep, const char *trace_clock) { - pevent->trace_clock = strdup(trace_clock); - if (!pevent->trace_clock) { + tep->trace_clock = strdup(trace_clock); + if (!tep->trace_clock) { errno = ENOMEM; return -1; } @@ -408,18 +408,18 @@ static int func_bcmp(const void *a, const void *b) return 1; } -static int func_map_init(struct tep_handle *pevent) +static int func_map_init(struct tep_handle *tep) { struct func_list *funclist; struct func_list *item; struct func_map *func_map; int i; - func_map = malloc(sizeof(*func_map) * (pevent->func_count + 1)); + func_map = malloc(sizeof(*func_map) * (tep->func_count + 1)); if (!func_map) return -1; - funclist = pevent->funclist; + funclist = tep->funclist; i = 0; while (funclist) { @@ -432,34 +432,34 @@ static int func_map_init(struct tep_handle *pevent) free(item); } - qsort(func_map, pevent->func_count, sizeof(*func_map), func_cmp); + qsort(func_map, tep->func_count, sizeof(*func_map), func_cmp); /* * Add a special record at the end. */ - func_map[pevent->func_count].func = NULL; - func_map[pevent->func_count].addr = 0; - func_map[pevent->func_count].mod = NULL; + func_map[tep->func_count].func = NULL; + func_map[tep->func_count].addr = 0; + func_map[tep->func_count].mod = NULL; - pevent->func_map = func_map; - pevent->funclist = NULL; + tep->func_map = func_map; + tep->funclist = NULL; return 0; } static struct func_map * -__find_func(struct tep_handle *pevent, unsigned long long addr) +__find_func(struct tep_handle *tep, unsigned long long addr) { struct func_map *func; struct func_map key; - if (!pevent->func_map) - func_map_init(pevent); + if (!tep->func_map) + func_map_init(tep); key.addr = addr; - func = bsearch(&key, pevent->func_map, pevent->func_count, - sizeof(*pevent->func_map), func_bcmp); + func = bsearch(&key, tep->func_map, tep->func_count, + sizeof(*tep->func_map), func_bcmp); return func; } @@ -472,15 +472,14 @@ struct func_resolver { /** * tep_set_function_resolver - set an alternative function resolver - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @resolver: function to be used * @priv: resolver function private state. * * Some tools may have already a way to resolve kernel functions, allow them to - * keep using it instead of duplicating all the entries inside - * pevent->funclist. + * keep using it instead of duplicating all the entries inside tep->funclist. */ -int tep_set_function_resolver(struct tep_handle *pevent, +int tep_set_function_resolver(struct tep_handle *tep, tep_func_resolver_t *func, void *priv) { struct func_resolver *resolver = malloc(sizeof(*resolver)); @@ -491,38 +490,38 @@ int tep_set_function_resolver(struct tep_handle *pevent, resolver->func = func; resolver->priv = priv; - free(pevent->func_resolver); - pevent->func_resolver = resolver; + free(tep->func_resolver); + tep->func_resolver = resolver; return 0; } /** * tep_reset_function_resolver - reset alternative function resolver - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * * Stop using whatever alternative resolver was set, use the default * one instead. */ -void tep_reset_function_resolver(struct tep_handle *pevent) +void tep_reset_function_resolver(struct tep_handle *tep) { - free(pevent->func_resolver); - pevent->func_resolver = NULL; + free(tep->func_resolver); + tep->func_resolver = NULL; } static struct func_map * -find_func(struct tep_handle *pevent, unsigned long long addr) +find_func(struct tep_handle *tep, unsigned long long addr) { struct func_map *map; - if (!pevent->func_resolver) - return __find_func(pevent, addr); + if (!tep->func_resolver) + return __find_func(tep, addr); - map = &pevent->func_resolver->map; + map = &tep->func_resolver->map; map->mod = NULL; map->addr = addr; - map->func = pevent->func_resolver->func(pevent->func_resolver->priv, - &map->addr, &map->mod); + map->func = tep->func_resolver->func(tep->func_resolver->priv, + &map->addr, &map->mod); if (map->func == NULL) return NULL; @@ -531,18 +530,18 @@ find_func(struct tep_handle *pevent, unsigned long long addr) /** * tep_find_function - find a function by a given address - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @addr: the address to find the function with * * Returns a pointer to the function stored that has the given * address. Note, the address does not have to be exact, it * will select the function that would contain the address. */ -const char *tep_find_function(struct tep_handle *pevent, unsigned long long addr) +const char *tep_find_function(struct tep_handle *tep, unsigned long long addr) { struct func_map *map; - map = find_func(pevent, addr); + map = find_func(tep, addr); if (!map) return NULL; @@ -551,7 +550,7 @@ const char *tep_find_function(struct tep_handle *pevent, unsigned long long addr /** * tep_find_function_address - find a function address by a given address - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @addr: the address to find the function with * * Returns the address the function starts at. This can be used in @@ -559,11 +558,11 @@ const char *tep_find_function(struct tep_handle *pevent, unsigned long long addr * name and the function offset. */ unsigned long long -tep_find_function_address(struct tep_handle *pevent, unsigned long long addr) +tep_find_function_address(struct tep_handle *tep, unsigned long long addr) { struct func_map *map; - map = find_func(pevent, addr); + map = find_func(tep, addr); if (!map) return 0; @@ -572,7 +571,7 @@ tep_find_function_address(struct tep_handle *pevent, unsigned long long addr) /** * tep_register_function - register a function with a given address - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @function: the function name to register * @addr: the address the function starts at * @mod: the kernel module the function may be in (NULL for none) @@ -580,7 +579,7 @@ tep_find_function_address(struct tep_handle *pevent, unsigned long long addr) * This registers a function name with an address and module. * The @func passed in is duplicated. */ -int tep_register_function(struct tep_handle *pevent, char *func, +int tep_register_function(struct tep_handle *tep, char *func, unsigned long long addr, char *mod) { struct func_list *item = malloc(sizeof(*item)); @@ -588,7 +587,7 @@ int tep_register_function(struct tep_handle *pevent, char *func, if (!item) return -1; - item->next = pevent->funclist; + item->next = tep->funclist; item->func = strdup(func); if (!item->func) goto out_free; @@ -601,8 +600,8 @@ int tep_register_function(struct tep_handle *pevent, char *func, item->mod = NULL; item->addr = addr; - pevent->funclist = item; - pevent->func_count++; + tep->funclist = item; + tep->func_count++; return 0; @@ -617,23 +616,23 @@ out_free: /** * tep_print_funcs - print out the stored functions - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * * This prints out the stored functions. */ -void tep_print_funcs(struct tep_handle *pevent) +void tep_print_funcs(struct tep_handle *tep) { int i; - if (!pevent->func_map) - func_map_init(pevent); + if (!tep->func_map) + func_map_init(tep); - for (i = 0; i < (int)pevent->func_count; i++) { + for (i = 0; i < (int)tep->func_count; i++) { printf("%016llx %s", - pevent->func_map[i].addr, - pevent->func_map[i].func); - if (pevent->func_map[i].mod) - printf(" [%s]\n", pevent->func_map[i].mod); + tep->func_map[i].addr, + tep->func_map[i].func); + if (tep->func_map[i].mod) + printf(" [%s]\n", tep->func_map[i].mod); else printf("\n"); } @@ -663,18 +662,18 @@ static int printk_cmp(const void *a, const void *b) return 0; } -static int printk_map_init(struct tep_handle *pevent) +static int printk_map_init(struct tep_handle *tep) { struct printk_list *printklist; struct printk_list *item; struct printk_map *printk_map; int i; - printk_map = malloc(sizeof(*printk_map) * (pevent->printk_count + 1)); + printk_map = malloc(sizeof(*printk_map) * (tep->printk_count + 1)); if (!printk_map) return -1; - printklist = pevent->printklist; + printklist = tep->printklist; i = 0; while (printklist) { @@ -686,41 +685,41 @@ static int printk_map_init(struct tep_handle *pevent) free(item); } - qsort(printk_map, pevent->printk_count, sizeof(*printk_map), printk_cmp); + qsort(printk_map, tep->printk_count, sizeof(*printk_map), printk_cmp); - pevent->printk_map = printk_map; - pevent->printklist = NULL; + tep->printk_map = printk_map; + tep->printklist = NULL; return 0; } static struct printk_map * -find_printk(struct tep_handle *pevent, unsigned long long addr) +find_printk(struct tep_handle *tep, unsigned long long addr) { struct printk_map *printk; struct printk_map key; - if (!pevent->printk_map && printk_map_init(pevent)) + if (!tep->printk_map && printk_map_init(tep)) return NULL; key.addr = addr; - printk = bsearch(&key, pevent->printk_map, pevent->printk_count, - sizeof(*pevent->printk_map), printk_cmp); + printk = bsearch(&key, tep->printk_map, tep->printk_count, + sizeof(*tep->printk_map), printk_cmp); return printk; } /** * tep_register_print_string - register a string by its address - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @fmt: the string format to register * @addr: the address the string was located at * * This registers a string by the address it was stored in the kernel. * The @fmt passed in is duplicated. */ -int tep_register_print_string(struct tep_handle *pevent, const char *fmt, +int tep_register_print_string(struct tep_handle *tep, const char *fmt, unsigned long long addr) { struct printk_list *item = malloc(sizeof(*item)); @@ -729,7 +728,7 @@ int tep_register_print_string(struct tep_handle *pevent, const char *fmt, if (!item) return -1; - item->next = pevent->printklist; + item->next = tep->printklist; item->addr = addr; /* Strip off quotes and '\n' from the end */ @@ -747,8 +746,8 @@ int tep_register_print_string(struct tep_handle *pevent, const char *fmt, if (strcmp(p, "\\n") == 0) *p = 0; - pevent->printklist = item; - pevent->printk_count++; + tep->printklist = item; + tep->printk_count++; return 0; @@ -760,21 +759,21 @@ out_free: /** * tep_print_printk - print out the stored strings - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * * This prints the string formats that were stored. */ -void tep_print_printk(struct tep_handle *pevent) +void tep_print_printk(struct tep_handle *tep) { int i; - if (!pevent->printk_map) - printk_map_init(pevent); + if (!tep->printk_map) + printk_map_init(tep); - for (i = 0; i < (int)pevent->printk_count; i++) { + for (i = 0; i < (int)tep->printk_count; i++) { printf("%016llx %s\n", - pevent->printk_map[i].addr, - pevent->printk_map[i].printk); + tep->printk_map[i].addr, + tep->printk_map[i].printk); } } @@ -783,29 +782,29 @@ static struct tep_event *alloc_event(void) return calloc(1, sizeof(struct tep_event)); } -static int add_event(struct tep_handle *pevent, struct tep_event *event) +static int add_event(struct tep_handle *tep, struct tep_event *event) { int i; - struct tep_event **events = realloc(pevent->events, sizeof(event) * - (pevent->nr_events + 1)); + struct tep_event **events = realloc(tep->events, sizeof(event) * + (tep->nr_events + 1)); if (!events) return -1; - pevent->events = events; + tep->events = events; - for (i = 0; i < pevent->nr_events; i++) { - if (pevent->events[i]->id > event->id) + for (i = 0; i < tep->nr_events; i++) { + if (tep->events[i]->id > event->id) break; } - if (i < pevent->nr_events) - memmove(&pevent->events[i + 1], - &pevent->events[i], - sizeof(event) * (pevent->nr_events - i)); + if (i < tep->nr_events) + memmove(&tep->events[i + 1], + &tep->events[i], + sizeof(event) * (tep->nr_events - i)); - pevent->events[i] = event; - pevent->nr_events++; + tep->events[i] = event; + tep->nr_events++; - event->pevent = pevent; + event->tep = tep; return 0; } @@ -1184,7 +1183,7 @@ static enum tep_event_type read_token(char **tok) } /** - * tep_read_token - access to utilities to use the pevent parser + * tep_read_token - access to utilities to use the tep parser * @tok: The token to return * * This will parse tokens from the string given by @@ -1657,8 +1656,8 @@ static int event_read_fields(struct tep_event *event, struct tep_format_field ** else if (field->flags & TEP_FIELD_IS_STRING) field->elementsize = 1; else if (field->flags & TEP_FIELD_IS_LONG) - field->elementsize = event->pevent ? - event->pevent->long_size : + field->elementsize = event->tep ? + event->tep->long_size : sizeof(long); } else field->elementsize = field->size; @@ -2233,7 +2232,7 @@ eval_type_str(unsigned long long val, const char *type, int pointer) return val & 0xffffffff; if (strcmp(type, "u64") == 0 || - strcmp(type, "s64")) + strcmp(type, "s64") == 0) return val; if (strcmp(type, "s8") == 0) @@ -2942,14 +2941,14 @@ process_bitmask(struct tep_event *event __maybe_unused, struct tep_print_arg *ar } static struct tep_function_handler * -find_func_handler(struct tep_handle *pevent, char *func_name) +find_func_handler(struct tep_handle *tep, char *func_name) { struct tep_function_handler *func; - if (!pevent) + if (!tep) return NULL; - for (func = pevent->func_handlers; func; func = func->next) { + for (func = tep->func_handlers; func; func = func->next) { if (strcmp(func->name, func_name) == 0) break; } @@ -2957,12 +2956,12 @@ find_func_handler(struct tep_handle *pevent, char *func_name) return func; } -static void remove_func_handler(struct tep_handle *pevent, char *func_name) +static void remove_func_handler(struct tep_handle *tep, char *func_name) { struct tep_function_handler *func; struct tep_function_handler **next; - next = &pevent->func_handlers; + next = &tep->func_handlers; while ((func = *next)) { if (strcmp(func->name, func_name) == 0) { *next = func->next; @@ -3076,7 +3075,7 @@ process_function(struct tep_event *event, struct tep_print_arg *arg, return process_dynamic_array_len(event, arg, tok); } - func = find_func_handler(event->pevent, token); + func = find_func_handler(event->tep, token); if (func) { free_token(token); return process_func_handler(event, func, arg, tok); @@ -3357,14 +3356,14 @@ tep_find_any_field(struct tep_event *event, const char *name) /** * tep_read_number - read a number from data - * @pevent: handle for the pevent + * @tep: a handle to the trace event parser context * @ptr: the raw data * @size: the size of the data that holds the number * * Returns the number (converted to host) from the * raw data. */ -unsigned long long tep_read_number(struct tep_handle *pevent, +unsigned long long tep_read_number(struct tep_handle *tep, const void *ptr, int size) { unsigned long long val; @@ -3373,12 +3372,12 @@ unsigned long long tep_read_number(struct tep_handle *pevent, case 1: return *(unsigned char *)ptr; case 2: - return tep_data2host2(pevent, *(unsigned short *)ptr); + return tep_data2host2(tep, *(unsigned short *)ptr); case 4: - return tep_data2host4(pevent, *(unsigned int *)ptr); + return tep_data2host4(tep, *(unsigned int *)ptr); case 8: memcpy(&val, (ptr), sizeof(unsigned long long)); - return tep_data2host8(pevent, val); + return tep_data2host8(tep, val); default: /* BUG! */ return 0; @@ -3406,7 +3405,7 @@ int tep_read_number_field(struct tep_format_field *field, const void *data, case 2: case 4: case 8: - *value = tep_read_number(field->event->pevent, + *value = tep_read_number(field->event->tep, data + field->offset, field->size); return 0; default: @@ -3414,7 +3413,7 @@ int tep_read_number_field(struct tep_format_field *field, const void *data, } } -static int get_common_info(struct tep_handle *pevent, +static int get_common_info(struct tep_handle *tep, const char *type, int *offset, int *size) { struct tep_event *event; @@ -3424,12 +3423,12 @@ static int get_common_info(struct tep_handle *pevent, * All events should have the same common elements. * Pick any event to find where the type is; */ - if (!pevent->events) { + if (!tep->events) { do_warning("no event_list!"); return -1; } - event = pevent->events[0]; + event = tep->events[0]; field = tep_find_common_field(event, type); if (!field) return -1; @@ -3440,58 +3439,58 @@ static int get_common_info(struct tep_handle *pevent, return 0; } -static int __parse_common(struct tep_handle *pevent, void *data, +static int __parse_common(struct tep_handle *tep, void *data, int *size, int *offset, const char *name) { int ret; if (!*size) { - ret = get_common_info(pevent, name, offset, size); + ret = get_common_info(tep, name, offset, size); if (ret < 0) return ret; } - return tep_read_number(pevent, data + *offset, *size); + return tep_read_number(tep, data + *offset, *size); } -static int trace_parse_common_type(struct tep_handle *pevent, void *data) +static int trace_parse_common_type(struct tep_handle *tep, void *data) { - return __parse_common(pevent, data, - &pevent->type_size, &pevent->type_offset, + return __parse_common(tep, data, + &tep->type_size, &tep->type_offset, "common_type"); } -static int parse_common_pid(struct tep_handle *pevent, void *data) +static int parse_common_pid(struct tep_handle *tep, void *data) { - return __parse_common(pevent, data, - &pevent->pid_size, &pevent->pid_offset, + return __parse_common(tep, data, + &tep->pid_size, &tep->pid_offset, "common_pid"); } -static int parse_common_pc(struct tep_handle *pevent, void *data) +static int parse_common_pc(struct tep_handle *tep, void *data) { - return __parse_common(pevent, data, - &pevent->pc_size, &pevent->pc_offset, + return __parse_common(tep, data, + &tep->pc_size, &tep->pc_offset, "common_preempt_count"); } -static int parse_common_flags(struct tep_handle *pevent, void *data) +static int parse_common_flags(struct tep_handle *tep, void *data) { - return __parse_common(pevent, data, - &pevent->flags_size, &pevent->flags_offset, + return __parse_common(tep, data, + &tep->flags_size, &tep->flags_offset, "common_flags"); } -static int parse_common_lock_depth(struct tep_handle *pevent, void *data) +static int parse_common_lock_depth(struct tep_handle *tep, void *data) { - return __parse_common(pevent, data, - &pevent->ld_size, &pevent->ld_offset, + return __parse_common(tep, data, + &tep->ld_size, &tep->ld_offset, "common_lock_depth"); } -static int parse_common_migrate_disable(struct tep_handle *pevent, void *data) +static int parse_common_migrate_disable(struct tep_handle *tep, void *data) { - return __parse_common(pevent, data, - &pevent->ld_size, &pevent->ld_offset, + return __parse_common(tep, data, + &tep->ld_size, &tep->ld_offset, "common_migrate_disable"); } @@ -3499,28 +3498,28 @@ static int events_id_cmp(const void *a, const void *b); /** * tep_find_event - find an event by given id - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @id: the id of the event * * Returns an event that has a given @id. */ -struct tep_event *tep_find_event(struct tep_handle *pevent, int id) +struct tep_event *tep_find_event(struct tep_handle *tep, int id) { struct tep_event **eventptr; struct tep_event key; struct tep_event *pkey = &key; /* Check cache first */ - if (pevent->last_event && pevent->last_event->id == id) - return pevent->last_event; + if (tep->last_event && tep->last_event->id == id) + return tep->last_event; key.id = id; - eventptr = bsearch(&pkey, pevent->events, pevent->nr_events, - sizeof(*pevent->events), events_id_cmp); + eventptr = bsearch(&pkey, tep->events, tep->nr_events, + sizeof(*tep->events), events_id_cmp); if (eventptr) { - pevent->last_event = *eventptr; + tep->last_event = *eventptr; return *eventptr; } @@ -3529,7 +3528,7 @@ struct tep_event *tep_find_event(struct tep_handle *pevent, int id) /** * tep_find_event_by_name - find an event by given name - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @sys: the system name to search for * @name: the name of the event to search for * @@ -3537,19 +3536,19 @@ struct tep_event *tep_find_event(struct tep_handle *pevent, int id) * @sys. If @sys is NULL the first event with @name is returned. */ struct tep_event * -tep_find_event_by_name(struct tep_handle *pevent, +tep_find_event_by_name(struct tep_handle *tep, const char *sys, const char *name) { struct tep_event *event = NULL; int i; - if (pevent->last_event && - strcmp(pevent->last_event->name, name) == 0 && - (!sys || strcmp(pevent->last_event->system, sys) == 0)) - return pevent->last_event; + if (tep->last_event && + strcmp(tep->last_event->name, name) == 0 && + (!sys || strcmp(tep->last_event->system, sys) == 0)) + return tep->last_event; - for (i = 0; i < pevent->nr_events; i++) { - event = pevent->events[i]; + for (i = 0; i < tep->nr_events; i++) { + event = tep->events[i]; if (strcmp(event->name, name) == 0) { if (!sys) break; @@ -3557,17 +3556,17 @@ tep_find_event_by_name(struct tep_handle *pevent, break; } } - if (i == pevent->nr_events) + if (i == tep->nr_events) event = NULL; - pevent->last_event = event; + tep->last_event = event; return event; } static unsigned long long eval_num_arg(void *data, int size, struct tep_event *event, struct tep_print_arg *arg) { - struct tep_handle *pevent = event->pevent; + struct tep_handle *tep = event->tep; unsigned long long val = 0; unsigned long long left, right; struct tep_print_arg *typearg = NULL; @@ -3589,7 +3588,7 @@ eval_num_arg(void *data, int size, struct tep_event *event, struct tep_print_arg } /* must be a number */ - val = tep_read_number(pevent, data + arg->field.field->offset, + val = tep_read_number(tep, data + arg->field.field->offset, arg->field.field->size); break; case TEP_PRINT_FLAGS: @@ -3629,11 +3628,11 @@ eval_num_arg(void *data, int size, struct tep_event *event, struct tep_print_arg } /* Default to long size */ - field_size = pevent->long_size; + field_size = tep->long_size; switch (larg->type) { case TEP_PRINT_DYNAMIC_ARRAY: - offset = tep_read_number(pevent, + offset = tep_read_number(tep, data + larg->dynarray.field->offset, larg->dynarray.field->size); if (larg->dynarray.field->elementsize) @@ -3662,7 +3661,7 @@ eval_num_arg(void *data, int size, struct tep_event *event, struct tep_print_arg default: goto default_op; /* oops, all bets off */ } - val = tep_read_number(pevent, + val = tep_read_number(tep, data + offset, field_size); if (typearg) val = eval_type(val, typearg, 1); @@ -3763,7 +3762,7 @@ eval_num_arg(void *data, int size, struct tep_event *event, struct tep_print_arg } break; case TEP_PRINT_DYNAMIC_ARRAY_LEN: - offset = tep_read_number(pevent, + offset = tep_read_number(tep, data + arg->dynarray.field->offset, arg->dynarray.field->size); /* @@ -3775,7 +3774,7 @@ eval_num_arg(void *data, int size, struct tep_event *event, struct tep_print_arg break; case TEP_PRINT_DYNAMIC_ARRAY: /* Without [], we pass the address to the dynamic data */ - offset = tep_read_number(pevent, + offset = tep_read_number(tep, data + arg->dynarray.field->offset, arg->dynarray.field->size); /* @@ -3850,7 +3849,7 @@ static void print_str_to_seq(struct trace_seq *s, const char *format, trace_seq_printf(s, format, str); } -static void print_bitmask_to_seq(struct tep_handle *pevent, +static void print_bitmask_to_seq(struct tep_handle *tep, struct trace_seq *s, const char *format, int len_arg, const void *data, int size) { @@ -3882,7 +3881,7 @@ static void print_bitmask_to_seq(struct tep_handle *pevent, * In the kernel, this is an array of long words, thus * endianness is very important. */ - if (pevent->file_bigendian) + if (tep->file_bigendian) index = size - (len + 1); else index = len; @@ -3908,7 +3907,7 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, struct tep_event *event, const char *format, int len_arg, struct tep_print_arg *arg) { - struct tep_handle *pevent = event->pevent; + struct tep_handle *tep = event->tep; struct tep_print_flag_sym *flag; struct tep_format_field *field; struct printk_map *printk; @@ -3945,7 +3944,7 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, * is a pointer. */ if (!(field->flags & TEP_FIELD_IS_ARRAY) && - field->size == pevent->long_size) { + field->size == tep->long_size) { /* Handle heterogeneous recording and processing * architectures @@ -3960,12 +3959,12 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, * on 32-bit devices: * In this case, 64 bits must be read. */ - addr = (pevent->long_size == 8) ? + addr = (tep->long_size == 8) ? *(unsigned long long *)(data + field->offset) : (unsigned long long)*(unsigned int *)(data + field->offset); /* Check if it matches a print format */ - printk = find_printk(pevent, addr); + printk = find_printk(tep, addr); if (printk) trace_seq_puts(s, printk->printk); else @@ -4022,7 +4021,7 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, case TEP_PRINT_HEX_STR: if (arg->hex.field->type == TEP_PRINT_DYNAMIC_ARRAY) { unsigned long offset; - offset = tep_read_number(pevent, + offset = tep_read_number(tep, data + arg->hex.field->dynarray.field->offset, arg->hex.field->dynarray.field->size); hex = data + (offset & 0xffff); @@ -4053,7 +4052,7 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, unsigned long offset; struct tep_format_field *field = arg->int_array.field->dynarray.field; - offset = tep_read_number(pevent, + offset = tep_read_number(tep, data + field->offset, field->size); num = data + (offset & 0xffff); @@ -4104,7 +4103,7 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, f = tep_find_any_field(event, arg->string.string); arg->string.offset = f->offset; } - str_offset = tep_data2host4(pevent, *(unsigned int *)(data + arg->string.offset)); + str_offset = tep_data2host4(tep, *(unsigned int *)(data + arg->string.offset)); str_offset &= 0xffff; print_str_to_seq(s, format, len_arg, ((char *)data) + str_offset); break; @@ -4122,10 +4121,10 @@ static void print_str_arg(struct trace_seq *s, void *data, int size, f = tep_find_any_field(event, arg->bitmask.bitmask); arg->bitmask.offset = f->offset; } - bitmask_offset = tep_data2host4(pevent, *(unsigned int *)(data + arg->bitmask.offset)); + bitmask_offset = tep_data2host4(tep, *(unsigned int *)(data + arg->bitmask.offset)); bitmask_size = bitmask_offset >> 16; bitmask_offset &= 0xffff; - print_bitmask_to_seq(pevent, s, format, len_arg, + print_bitmask_to_seq(tep, s, format, len_arg, data + bitmask_offset, bitmask_size); break; } @@ -4257,7 +4256,7 @@ static void free_args(struct tep_print_arg *args) static struct tep_print_arg *make_bprint_args(char *fmt, void *data, int size, struct tep_event *event) { - struct tep_handle *pevent = event->pevent; + struct tep_handle *tep = event->tep; struct tep_format_field *field, *ip_field; struct tep_print_arg *args, *arg, **next; unsigned long long ip, val; @@ -4265,8 +4264,8 @@ static struct tep_print_arg *make_bprint_args(char *fmt, void *data, int size, s void *bptr; int vsize = 0; - field = pevent->bprint_buf_field; - ip_field = pevent->bprint_ip_field; + field = tep->bprint_buf_field; + ip_field = tep->bprint_ip_field; if (!field) { field = tep_find_field(event, "buf"); @@ -4279,11 +4278,11 @@ static struct tep_print_arg *make_bprint_args(char *fmt, void *data, int size, s do_warning_event(event, "can't find ip field for binary printk"); return NULL; } - pevent->bprint_buf_field = field; - pevent->bprint_ip_field = ip_field; + tep->bprint_buf_field = field; + tep->bprint_ip_field = ip_field; } - ip = tep_read_number(pevent, data + ip_field->offset, ip_field->size); + ip = tep_read_number(tep, data + ip_field->offset, ip_field->size); /* * The first arg is the IP pointer. @@ -4338,6 +4337,7 @@ static struct tep_print_arg *make_bprint_args(char *fmt, void *data, int size, s case 'S': case 'f': case 'F': + case 'x': break; default: /* @@ -4360,7 +4360,7 @@ static struct tep_print_arg *make_bprint_args(char *fmt, void *data, int size, s vsize = 4; break; case 1: - vsize = pevent->long_size; + vsize = tep->long_size; break; case 2: vsize = 8; @@ -4377,7 +4377,7 @@ static struct tep_print_arg *make_bprint_args(char *fmt, void *data, int size, s /* the pointers are always 4 bytes aligned */ bptr = (void *)(((unsigned long)bptr + 3) & ~3); - val = tep_read_number(pevent, bptr, vsize); + val = tep_read_number(tep, bptr, vsize); bptr += vsize; arg = alloc_arg(); if (!arg) { @@ -4434,13 +4434,13 @@ static char * get_bprint_format(void *data, int size __maybe_unused, struct tep_event *event) { - struct tep_handle *pevent = event->pevent; + struct tep_handle *tep = event->tep; unsigned long long addr; struct tep_format_field *field; struct printk_map *printk; char *format; - field = pevent->bprint_fmt_field; + field = tep->bprint_fmt_field; if (!field) { field = tep_find_field(event, "fmt"); @@ -4448,12 +4448,12 @@ get_bprint_format(void *data, int size __maybe_unused, do_warning_event(event, "can't find format field for binary printk"); return NULL; } - pevent->bprint_fmt_field = field; + tep->bprint_fmt_field = field; } - addr = tep_read_number(pevent, data + field->offset, field->size); + addr = tep_read_number(tep, data + field->offset, field->size); - printk = find_printk(pevent, addr); + printk = find_printk(tep, addr); if (!printk) { if (asprintf(&format, "%%pf: (NO FORMAT FOUND at %llx)\n", addr) < 0) return NULL; @@ -4835,13 +4835,13 @@ void tep_print_field(struct trace_seq *s, void *data, { unsigned long long val; unsigned int offset, len, i; - struct tep_handle *pevent = field->event->pevent; + struct tep_handle *tep = field->event->tep; if (field->flags & TEP_FIELD_IS_ARRAY) { offset = field->offset; len = field->size; if (field->flags & TEP_FIELD_IS_DYNAMIC) { - val = tep_read_number(pevent, data + offset, len); + val = tep_read_number(tep, data + offset, len); offset = val; len = offset >> 16; offset &= 0xffff; @@ -4861,7 +4861,7 @@ void tep_print_field(struct trace_seq *s, void *data, field->flags &= ~TEP_FIELD_IS_STRING; } } else { - val = tep_read_number(pevent, data + field->offset, + val = tep_read_number(tep, data + field->offset, field->size); if (field->flags & TEP_FIELD_IS_POINTER) { trace_seq_printf(s, "0x%llx", val); @@ -4910,7 +4910,7 @@ void tep_print_fields(struct trace_seq *s, void *data, static void pretty_print(struct trace_seq *s, void *data, int size, struct tep_event *event) { - struct tep_handle *pevent = event->pevent; + struct tep_handle *tep = event->tep; struct tep_print_fmt *print_fmt = &event->print_fmt; struct tep_print_arg *arg = print_fmt->args; struct tep_print_arg *args = NULL; @@ -5002,7 +5002,7 @@ static void pretty_print(struct trace_seq *s, void *data, int size, struct tep_e case '-': goto cont_process; case 'p': - if (pevent->long_size == 4) + if (tep->long_size == 4) ls = 1; else ls = 2; @@ -5063,7 +5063,7 @@ static void pretty_print(struct trace_seq *s, void *data, int size, struct tep_e arg = arg->next; if (show_func) { - func = find_func(pevent, val); + func = find_func(tep, val); if (func) { trace_seq_puts(s, func->func); if (show_func == 'F') @@ -5073,7 +5073,7 @@ static void pretty_print(struct trace_seq *s, void *data, int size, struct tep_e break; } } - if (pevent->long_size == 8 && ls == 1 && + if (tep->long_size == 8 && ls == 1 && sizeof(long) != 8) { char *p; @@ -5171,8 +5171,8 @@ out_failed: } /** - * tep_data_lat_fmt - parse the data for the latency format - * @pevent: a handle to the pevent + * tep_data_latency_format - parse the data for the latency format + * @tep: a handle to the trace event parser context * @s: the trace_seq to write to * @record: the record to read from * @@ -5180,8 +5180,8 @@ out_failed: * need rescheduling, in hard/soft interrupt, preempt count * and lock depth) and places it into the trace_seq. */ -void tep_data_lat_fmt(struct tep_handle *pevent, - struct trace_seq *s, struct tep_record *record) +void tep_data_latency_format(struct tep_handle *tep, + struct trace_seq *s, struct tep_record *record) { static int check_lock_depth = 1; static int check_migrate_disable = 1; @@ -5195,13 +5195,13 @@ void tep_data_lat_fmt(struct tep_handle *pevent, int softirq; void *data = record->data; - lat_flags = parse_common_flags(pevent, data); - pc = parse_common_pc(pevent, data); + lat_flags = parse_common_flags(tep, data); + pc = parse_common_pc(tep, data); /* lock_depth may not always exist */ if (lock_depth_exists) - lock_depth = parse_common_lock_depth(pevent, data); + lock_depth = parse_common_lock_depth(tep, data); else if (check_lock_depth) { - lock_depth = parse_common_lock_depth(pevent, data); + lock_depth = parse_common_lock_depth(tep, data); if (lock_depth < 0) check_lock_depth = 0; else @@ -5210,9 +5210,9 @@ void tep_data_lat_fmt(struct tep_handle *pevent, /* migrate_disable may not always exist */ if (migrate_disable_exists) - migrate_disable = parse_common_migrate_disable(pevent, data); + migrate_disable = parse_common_migrate_disable(tep, data); else if (check_migrate_disable) { - migrate_disable = parse_common_migrate_disable(pevent, data); + migrate_disable = parse_common_migrate_disable(tep, data); if (migrate_disable < 0) check_migrate_disable = 0; else @@ -5255,79 +5255,79 @@ void tep_data_lat_fmt(struct tep_handle *pevent, /** * tep_data_type - parse out the given event type - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @rec: the record to read from * * This returns the event id from the @rec. */ -int tep_data_type(struct tep_handle *pevent, struct tep_record *rec) +int tep_data_type(struct tep_handle *tep, struct tep_record *rec) { - return trace_parse_common_type(pevent, rec->data); + return trace_parse_common_type(tep, rec->data); } /** * tep_data_pid - parse the PID from record - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @rec: the record to parse * * This returns the PID from a record. */ -int tep_data_pid(struct tep_handle *pevent, struct tep_record *rec) +int tep_data_pid(struct tep_handle *tep, struct tep_record *rec) { - return parse_common_pid(pevent, rec->data); + return parse_common_pid(tep, rec->data); } /** * tep_data_preempt_count - parse the preempt count from the record - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @rec: the record to parse * * This returns the preempt count from a record. */ -int tep_data_preempt_count(struct tep_handle *pevent, struct tep_record *rec) +int tep_data_preempt_count(struct tep_handle *tep, struct tep_record *rec) { - return parse_common_pc(pevent, rec->data); + return parse_common_pc(tep, rec->data); } /** * tep_data_flags - parse the latency flags from the record - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @rec: the record to parse * * This returns the latency flags from a record. * * Use trace_flag_type enum for the flags (see event-parse.h). */ -int tep_data_flags(struct tep_handle *pevent, struct tep_record *rec) +int tep_data_flags(struct tep_handle *tep, struct tep_record *rec) { - return parse_common_flags(pevent, rec->data); + return parse_common_flags(tep, rec->data); } /** * tep_data_comm_from_pid - return the command line from PID - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @pid: the PID of the task to search for * * This returns a pointer to the command line that has the given * @pid. */ -const char *tep_data_comm_from_pid(struct tep_handle *pevent, int pid) +const char *tep_data_comm_from_pid(struct tep_handle *tep, int pid) { const char *comm; - comm = find_cmdline(pevent, pid); + comm = find_cmdline(tep, pid); return comm; } static struct tep_cmdline * -pid_from_cmdlist(struct tep_handle *pevent, const char *comm, struct tep_cmdline *next) +pid_from_cmdlist(struct tep_handle *tep, const char *comm, struct tep_cmdline *next) { struct cmdline_list *cmdlist = (struct cmdline_list *)next; if (cmdlist) cmdlist = cmdlist->next; else - cmdlist = pevent->cmdlist; + cmdlist = tep->cmdlist; while (cmdlist && strcmp(cmdlist->comm, comm) != 0) cmdlist = cmdlist->next; @@ -5337,7 +5337,7 @@ pid_from_cmdlist(struct tep_handle *pevent, const char *comm, struct tep_cmdline /** * tep_data_pid_from_comm - return the pid from a given comm - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @comm: the cmdline to find the pid from * @next: the cmdline structure to find the next comm * @@ -5348,7 +5348,7 @@ pid_from_cmdlist(struct tep_handle *pevent, const char *comm, struct tep_cmdline * next pid. * Also, it does a linear search, so it may be slow. */ -struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char *comm, +struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *tep, const char *comm, struct tep_cmdline *next) { struct tep_cmdline *cmdline; @@ -5357,25 +5357,25 @@ struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char * If the cmdlines have not been converted yet, then use * the list. */ - if (!pevent->cmdlines) - return pid_from_cmdlist(pevent, comm, next); + if (!tep->cmdlines) + return pid_from_cmdlist(tep, comm, next); if (next) { /* * The next pointer could have been still from * a previous call before cmdlines were created */ - if (next < pevent->cmdlines || - next >= pevent->cmdlines + pevent->cmdline_count) + if (next < tep->cmdlines || + next >= tep->cmdlines + tep->cmdline_count) next = NULL; else cmdline = next++; } if (!next) - cmdline = pevent->cmdlines; + cmdline = tep->cmdlines; - while (cmdline < pevent->cmdlines + pevent->cmdline_count) { + while (cmdline < tep->cmdlines + tep->cmdline_count) { if (strcmp(cmdline->comm, comm) == 0) return cmdline; cmdline++; @@ -5385,12 +5385,13 @@ struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char /** * tep_cmdline_pid - return the pid associated to a given cmdline + * @tep: a handle to the trace event parser context * @cmdline: The cmdline structure to get the pid from * * Returns the pid for a give cmdline. If @cmdline is NULL, then * -1 is returned. */ -int tep_cmdline_pid(struct tep_handle *pevent, struct tep_cmdline *cmdline) +int tep_cmdline_pid(struct tep_handle *tep, struct tep_cmdline *cmdline) { struct cmdline_list *cmdlist = (struct cmdline_list *)cmdline; @@ -5401,9 +5402,9 @@ int tep_cmdline_pid(struct tep_handle *pevent, struct tep_cmdline *cmdline) * If cmdlines have not been created yet, or cmdline is * not part of the array, then treat it as a cmdlist instead. */ - if (!pevent->cmdlines || - cmdline < pevent->cmdlines || - cmdline >= pevent->cmdlines + pevent->cmdline_count) + if (!tep->cmdlines || + cmdline < tep->cmdlines || + cmdline >= tep->cmdlines + tep->cmdline_count) return cmdlist->pid; return cmdline->pid; @@ -5423,7 +5424,7 @@ void tep_event_info(struct trace_seq *s, struct tep_event *event, { int print_pretty = 1; - if (event->pevent->print_raw || (event->flags & TEP_EVENT_FL_PRINTRAW)) + if (event->tep->print_raw || (event->flags & TEP_EVENT_FL_PRINTRAW)) tep_print_fields(s, record->data, record->size, event); else { @@ -5444,7 +5445,8 @@ static bool is_timestamp_in_us(char *trace_clock, bool use_trace_clock) return true; if (!strcmp(trace_clock, "local") || !strcmp(trace_clock, "global") - || !strcmp(trace_clock, "uptime") || !strcmp(trace_clock, "perf")) + || !strcmp(trace_clock, "uptime") || !strcmp(trace_clock, "perf") + || !strncmp(trace_clock, "mono", 4)) return true; /* trace_clock is setting in tsc or counter mode */ @@ -5453,14 +5455,14 @@ static bool is_timestamp_in_us(char *trace_clock, bool use_trace_clock) /** * tep_find_event_by_record - return the event from a given record - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @record: The record to get the event from * * Returns the associated event for a given record, or NULL if non is * is found. */ struct tep_event * -tep_find_event_by_record(struct tep_handle *pevent, struct tep_record *record) +tep_find_event_by_record(struct tep_handle *tep, struct tep_record *record) { int type; @@ -5469,21 +5471,21 @@ tep_find_event_by_record(struct tep_handle *pevent, struct tep_record *record) return NULL; } - type = trace_parse_common_type(pevent, record->data); + type = trace_parse_common_type(tep, record->data); - return tep_find_event(pevent, type); + return tep_find_event(tep, type); } /** * tep_print_event_task - Write the event task comm, pid and CPU - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @s: the trace_seq to write to * @event: the handle to the record's event * @record: The record to get the event from * * Writes the tasks comm, pid and CPU to @s. */ -void tep_print_event_task(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event_task(struct tep_handle *tep, struct trace_seq *s, struct tep_event *event, struct tep_record *record) { @@ -5491,27 +5493,26 @@ void tep_print_event_task(struct tep_handle *pevent, struct trace_seq *s, const char *comm; int pid; - pid = parse_common_pid(pevent, data); - comm = find_cmdline(pevent, pid); + pid = parse_common_pid(tep, data); + comm = find_cmdline(tep, pid); - if (pevent->latency_format) { - trace_seq_printf(s, "%8.8s-%-5d %3d", - comm, pid, record->cpu); - } else + if (tep->latency_format) + trace_seq_printf(s, "%8.8s-%-5d %3d", comm, pid, record->cpu); + else trace_seq_printf(s, "%16s-%-5d [%03d]", comm, pid, record->cpu); } /** * tep_print_event_time - Write the event timestamp - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @s: the trace_seq to write to * @event: the handle to the record's event * @record: The record to get the event from - * @use_trace_clock: Set to parse according to the @pevent->trace_clock + * @use_trace_clock: Set to parse according to the @tep->trace_clock * * Writes the timestamp of the record into @s. */ -void tep_print_event_time(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event_time(struct tep_handle *tep, struct trace_seq *s, struct tep_event *event, struct tep_record *record, bool use_trace_clock) @@ -5522,19 +5523,18 @@ void tep_print_event_time(struct tep_handle *pevent, struct trace_seq *s, int p; bool use_usec_format; - use_usec_format = is_timestamp_in_us(pevent->trace_clock, - use_trace_clock); + use_usec_format = is_timestamp_in_us(tep->trace_clock, use_trace_clock); if (use_usec_format) { secs = record->ts / NSEC_PER_SEC; nsecs = record->ts - secs * NSEC_PER_SEC; } - if (pevent->latency_format) { - tep_data_lat_fmt(pevent, s, record); + if (tep->latency_format) { + tep_data_latency_format(tep, s, record); } if (use_usec_format) { - if (pevent->flags & TEP_NSEC_OUTPUT) { + if (tep->flags & TEP_NSEC_OUTPUT) { usecs = nsecs; p = 9; } else { @@ -5554,14 +5554,14 @@ void tep_print_event_time(struct tep_handle *pevent, struct trace_seq *s, /** * tep_print_event_data - Write the event data section - * @pevent: a handle to the pevent + * @tep: a handle to the trace event parser context * @s: the trace_seq to write to * @event: the handle to the record's event * @record: The record to get the event from * * Writes the parsing of the record's data to @s. */ -void tep_print_event_data(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event_data(struct tep_handle *tep, struct trace_seq *s, struct tep_event *event, struct tep_record *record) { @@ -5578,15 +5578,15 @@ void tep_print_event_data(struct tep_handle *pevent, struct trace_seq *s, tep_event_info(s, event, record); } -void tep_print_event(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event(struct tep_handle *tep, struct trace_seq *s, struct tep_record *record, bool use_trace_clock) { struct tep_event *event; - event = tep_find_event_by_record(pevent, record); + event = tep_find_event_by_record(tep, record); if (!event) { int i; - int type = trace_parse_common_type(pevent, record->data); + int type = trace_parse_common_type(tep, record->data); do_warning("ug! no event found for type %d", type); trace_seq_printf(s, "[UNKNOWN TYPE %d]", type); @@ -5596,9 +5596,9 @@ void tep_print_event(struct tep_handle *pevent, struct trace_seq *s, return; } - tep_print_event_task(pevent, s, event, record); - tep_print_event_time(pevent, s, event, record, use_trace_clock); - tep_print_event_data(pevent, s, event, record); + tep_print_event_task(tep, s, event, record); + tep_print_event_time(tep, s, event, record, use_trace_clock); + tep_print_event_data(tep, s, event, record); } static int events_id_cmp(const void *a, const void *b) @@ -5649,32 +5649,26 @@ static int events_system_cmp(const void *a, const void *b) return events_id_cmp(a, b); } -struct tep_event **tep_list_events(struct tep_handle *pevent, enum tep_event_sort_type sort_type) +static struct tep_event **list_events_copy(struct tep_handle *tep) { struct tep_event **events; - int (*sort)(const void *a, const void *b); - - events = pevent->sort_events; - - if (events && pevent->last_type == sort_type) - return events; - if (!events) { - events = malloc(sizeof(*events) * (pevent->nr_events + 1)); - if (!events) - return NULL; + if (!tep) + return NULL; - memcpy(events, pevent->events, sizeof(*events) * pevent->nr_events); - events[pevent->nr_events] = NULL; + events = malloc(sizeof(*events) * (tep->nr_events + 1)); + if (!events) + return NULL; - pevent->sort_events = events; + memcpy(events, tep->events, sizeof(*events) * tep->nr_events); + events[tep->nr_events] = NULL; + return events; +} - /* the internal events are sorted by id */ - if (sort_type == TEP_EVENT_SORT_ID) { - pevent->last_type = sort_type; - return events; - } - } +static void list_events_sort(struct tep_event **events, int nr_events, + enum tep_event_sort_type sort_type) +{ + int (*sort)(const void *a, const void *b); switch (sort_type) { case TEP_EVENT_SORT_ID: @@ -5687,11 +5681,82 @@ struct tep_event **tep_list_events(struct tep_handle *pevent, enum tep_event_sor sort = events_system_cmp; break; default: + sort = NULL; + } + + if (sort) + qsort(events, nr_events, sizeof(*events), sort); +} + +/** + * tep_list_events - Get events, sorted by given criteria. + * @tep: a handle to the tep context + * @sort_type: desired sort order of the events in the array + * + * Returns an array of pointers to all events, sorted by the given + * @sort_type criteria. The last element of the array is NULL. The returned + * memory must not be freed, it is managed by the library. + * The function is not thread safe. + */ +struct tep_event **tep_list_events(struct tep_handle *tep, + enum tep_event_sort_type sort_type) +{ + struct tep_event **events; + + if (!tep) + return NULL; + + events = tep->sort_events; + if (events && tep->last_type == sort_type) return events; + + if (!events) { + events = list_events_copy(tep); + if (!events) + return NULL; + + tep->sort_events = events; + + /* the internal events are sorted by id */ + if (sort_type == TEP_EVENT_SORT_ID) { + tep->last_type = sort_type; + return events; + } } - qsort(events, pevent->nr_events, sizeof(*events), sort); - pevent->last_type = sort_type; + list_events_sort(events, tep->nr_events, sort_type); + tep->last_type = sort_type; + + return events; +} + + +/** + * tep_list_events_copy - Thread safe version of tep_list_events() + * @tep: a handle to the tep context + * @sort_type: desired sort order of the events in the array + * + * Returns an array of pointers to all events, sorted by the given + * @sort_type criteria. The last element of the array is NULL. The returned + * array is newly allocated inside the function and must be freed by the caller + */ +struct tep_event **tep_list_events_copy(struct tep_handle *tep, + enum tep_event_sort_type sort_type) +{ + struct tep_event **events; + + if (!tep) + return NULL; + + events = list_events_copy(tep); + if (!events) + return NULL; + + /* the internal events are sorted by id */ + if (sort_type == TEP_EVENT_SORT_ID) + return events; + + list_events_sort(events, tep->nr_events, sort_type); return events; } @@ -5950,7 +6015,7 @@ static void parse_header_field(const char *field, /** * tep_parse_header_page - parse the data stored in the header page - * @pevent: the handle to the pevent + * @tep: a handle to the trace event parser context * @buf: the buffer storing the header page format string * @size: the size of @buf * @long_size: the long size to use if there is no header @@ -5960,7 +6025,7 @@ static void parse_header_field(const char *field, * * /sys/kernel/debug/tracing/events/header_page */ -int tep_parse_header_page(struct tep_handle *pevent, char *buf, unsigned long size, +int tep_parse_header_page(struct tep_handle *tep, char *buf, unsigned long size, int long_size) { int ignore; @@ -5970,22 +6035,22 @@ int tep_parse_header_page(struct tep_handle *pevent, char *buf, unsigned long si * Old kernels did not have header page info. * Sorry but we just use what we find here in user space. */ - pevent->header_page_ts_size = sizeof(long long); - pevent->header_page_size_size = long_size; - pevent->header_page_data_offset = sizeof(long long) + long_size; - pevent->old_format = 1; + tep->header_page_ts_size = sizeof(long long); + tep->header_page_size_size = long_size; + tep->header_page_data_offset = sizeof(long long) + long_size; + tep->old_format = 1; return -1; } init_input_buf(buf, size); - parse_header_field("timestamp", &pevent->header_page_ts_offset, - &pevent->header_page_ts_size, 1); - parse_header_field("commit", &pevent->header_page_size_offset, - &pevent->header_page_size_size, 1); - parse_header_field("overwrite", &pevent->header_page_overwrite, + parse_header_field("timestamp", &tep->header_page_ts_offset, + &tep->header_page_ts_size, 1); + parse_header_field("commit", &tep->header_page_size_offset, + &tep->header_page_size_size, 1); + parse_header_field("overwrite", &tep->header_page_overwrite, &ignore, 0); - parse_header_field("data", &pevent->header_page_data_offset, - &pevent->header_page_data_size, 1); + parse_header_field("data", &tep->header_page_data_offset, + &tep->header_page_data_size, 1); return 0; } @@ -6013,11 +6078,11 @@ static void free_handler(struct event_handler *handle) free(handle); } -static int find_event_handle(struct tep_handle *pevent, struct tep_event *event) +static int find_event_handle(struct tep_handle *tep, struct tep_event *event) { struct event_handler *handle, **next; - for (next = &pevent->handlers; *next; + for (next = &tep->handlers; *next; next = &(*next)->next) { handle = *next; if (event_matches(event, handle->id, @@ -6055,7 +6120,7 @@ static int find_event_handle(struct tep_handle *pevent, struct tep_event *event) * /sys/kernel/debug/tracing/events/.../.../format */ enum tep_errno __tep_parse_format(struct tep_event **eventp, - struct tep_handle *pevent, const char *buf, + struct tep_handle *tep, const char *buf, unsigned long size, const char *sys) { struct tep_event *event; @@ -6097,8 +6162,8 @@ enum tep_errno __tep_parse_format(struct tep_event **eventp, goto event_alloc_failed; } - /* Add pevent to event so that it can be referenced */ - event->pevent = pevent; + /* Add tep to event so that it can be referenced */ + event->tep = tep; ret = event_read_format(event); if (ret < 0) { @@ -6110,7 +6175,7 @@ enum tep_errno __tep_parse_format(struct tep_event **eventp, * If the event has an override, don't print warnings if the event * print format fails to parse. */ - if (pevent && find_event_handle(pevent, event)) + if (tep && find_event_handle(tep, event)) show_warning = 0; ret = event_read_print(event); @@ -6162,18 +6227,18 @@ enum tep_errno __tep_parse_format(struct tep_event **eventp, } static enum tep_errno -__parse_event(struct tep_handle *pevent, +__parse_event(struct tep_handle *tep, struct tep_event **eventp, const char *buf, unsigned long size, const char *sys) { - int ret = __tep_parse_format(eventp, pevent, buf, size, sys); + int ret = __tep_parse_format(eventp, tep, buf, size, sys); struct tep_event *event = *eventp; if (event == NULL) return ret; - if (pevent && add_event(pevent, event)) { + if (tep && add_event(tep, event)) { ret = TEP_ERRNO__MEM_ALLOC_FAILED; goto event_add_failed; } @@ -6191,7 +6256,7 @@ event_add_failed: /** * tep_parse_format - parse the event format - * @pevent: the handle to the pevent + * @tep: a handle to the trace event parser context * @eventp: returned format * @buf: the buffer storing the event format string * @size: the size of @buf @@ -6204,17 +6269,17 @@ event_add_failed: * * /sys/kernel/debug/tracing/events/.../.../format */ -enum tep_errno tep_parse_format(struct tep_handle *pevent, +enum tep_errno tep_parse_format(struct tep_handle *tep, struct tep_event **eventp, const char *buf, unsigned long size, const char *sys) { - return __parse_event(pevent, eventp, buf, size, sys); + return __parse_event(tep, eventp, buf, size, sys); } /** * tep_parse_event - parse the event format - * @pevent: the handle to the pevent + * @tep: a handle to the trace event parser context * @buf: the buffer storing the event format string * @size: the size of @buf * @sys: the system the event belongs to @@ -6226,11 +6291,11 @@ enum tep_errno tep_parse_format(struct tep_handle *pevent, * * /sys/kernel/debug/tracing/events/.../.../format */ -enum tep_errno tep_parse_event(struct tep_handle *pevent, const char *buf, +enum tep_errno tep_parse_event(struct tep_handle *tep, const char *buf, unsigned long size, const char *sys) { struct tep_event *event = NULL; - return __parse_event(pevent, &event, buf, size, sys); + return __parse_event(tep, &event, buf, size, sys); } int get_field_val(struct trace_seq *s, struct tep_format_field *field, @@ -6292,8 +6357,8 @@ void *tep_get_field_raw(struct trace_seq *s, struct tep_event *event, offset = field->offset; if (field->flags & TEP_FIELD_IS_DYNAMIC) { - offset = tep_read_number(event->pevent, - data + offset, field->size); + offset = tep_read_number(event->tep, + data + offset, field->size); *len = offset >> 16; offset &= 0xffff; } else @@ -6386,7 +6451,8 @@ int tep_get_any_field_val(struct trace_seq *s, struct tep_event *event, * @record: The record with the field name. * @err: print default error if failed. * - * Returns: 0 on success, -1 field not found, or 1 if buffer is full. + * Returns positive value on success, negative in case of an error, + * or 0 if buffer is full. */ int tep_print_num_field(struct trace_seq *s, const char *fmt, struct tep_event *event, const char *name, @@ -6418,14 +6484,15 @@ int tep_print_num_field(struct trace_seq *s, const char *fmt, * @record: The record with the field name. * @err: print default error if failed. * - * Returns: 0 on success, -1 field not found, or 1 if buffer is full. + * Returns positive value on success, negative in case of an error, + * or 0 if buffer is full. */ int tep_print_func_field(struct trace_seq *s, const char *fmt, struct tep_event *event, const char *name, struct tep_record *record, int err) { struct tep_format_field *field = tep_find_field(event, name); - struct tep_handle *pevent = event->pevent; + struct tep_handle *tep = event->tep; unsigned long long val; struct func_map *func; char tmp[128]; @@ -6436,7 +6503,7 @@ int tep_print_func_field(struct trace_seq *s, const char *fmt, if (tep_read_number_field(field, record->data, &val)) goto failed; - func = find_func(pevent, val); + func = find_func(tep, val); if (func) snprintf(tmp, 128, "%s/0x%llx", func->func, func->addr - val); @@ -6468,7 +6535,7 @@ static void free_func_handle(struct tep_function_handler *func) /** * tep_register_print_function - register a helper function - * @pevent: the handle to the pevent + * @tep: a handle to the trace event parser context * @func: the function to process the helper function * @ret_type: the return type of the helper function * @name: the name of the helper function @@ -6481,7 +6548,7 @@ static void free_func_handle(struct tep_function_handler *func) * The @parameters is a variable list of tep_func_arg_type enums that * must end with TEP_FUNC_ARG_VOID. */ -int tep_register_print_function(struct tep_handle *pevent, +int tep_register_print_function(struct tep_handle *tep, tep_func_handler func, enum tep_func_arg_type ret_type, char *name, ...) @@ -6493,7 +6560,7 @@ int tep_register_print_function(struct tep_handle *pevent, va_list ap; int ret; - func_handle = find_func_handler(pevent, name); + func_handle = find_func_handler(tep, name); if (func_handle) { /* * This is most like caused by the users own @@ -6501,7 +6568,7 @@ int tep_register_print_function(struct tep_handle *pevent, * system defaults. */ pr_stat("override of function helper '%s'", name); - remove_func_handler(pevent, name); + remove_func_handler(tep, name); } func_handle = calloc(1, sizeof(*func_handle)); @@ -6548,8 +6615,8 @@ int tep_register_print_function(struct tep_handle *pevent, } va_end(ap); - func_handle->next = pevent->func_handlers; - pevent->func_handlers = func_handle; + func_handle->next = tep->func_handlers; + tep->func_handlers = func_handle; return 0; out_free: @@ -6560,7 +6627,7 @@ int tep_register_print_function(struct tep_handle *pevent, /** * tep_unregister_print_function - unregister a helper function - * @pevent: the handle to the pevent + * @tep: a handle to the trace event parser context * @func: the function to process the helper function * @name: the name of the helper function * @@ -6568,20 +6635,20 @@ int tep_register_print_function(struct tep_handle *pevent, * * Returns 0 if the handler was removed successully, -1 otherwise. */ -int tep_unregister_print_function(struct tep_handle *pevent, +int tep_unregister_print_function(struct tep_handle *tep, tep_func_handler func, char *name) { struct tep_function_handler *func_handle; - func_handle = find_func_handler(pevent, name); + func_handle = find_func_handler(tep, name); if (func_handle && func_handle->func == func) { - remove_func_handler(pevent, name); + remove_func_handler(tep, name); return 0; } return -1; } -static struct tep_event *search_event(struct tep_handle *pevent, int id, +static struct tep_event *search_event(struct tep_handle *tep, int id, const char *sys_name, const char *event_name) { @@ -6589,7 +6656,7 @@ static struct tep_event *search_event(struct tep_handle *pevent, int id, if (id >= 0) { /* search by id */ - event = tep_find_event(pevent, id); + event = tep_find_event(tep, id); if (!event) return NULL; if (event_name && (strcmp(event_name, event->name) != 0)) @@ -6597,7 +6664,7 @@ static struct tep_event *search_event(struct tep_handle *pevent, int id, if (sys_name && (strcmp(sys_name, event->system) != 0)) return NULL; } else { - event = tep_find_event_by_name(pevent, sys_name, event_name); + event = tep_find_event_by_name(tep, sys_name, event_name); if (!event) return NULL; } @@ -6606,7 +6673,7 @@ static struct tep_event *search_event(struct tep_handle *pevent, int id, /** * tep_register_event_handler - register a way to parse an event - * @pevent: the handle to the pevent + * @tep: a handle to the trace event parser context * @id: the id of the event to register * @sys_name: the system name the event belongs to * @event_name: the name of the event @@ -6627,14 +6694,14 @@ static struct tep_event *search_event(struct tep_handle *pevent, int id, * negative TEP_ERRNO_... in case of an error * */ -int tep_register_event_handler(struct tep_handle *pevent, int id, +int tep_register_event_handler(struct tep_handle *tep, int id, const char *sys_name, const char *event_name, tep_event_handler_func func, void *context) { struct tep_event *event; struct event_handler *handle; - event = search_event(pevent, id, sys_name, event_name); + event = search_event(tep, id, sys_name, event_name); if (event == NULL) goto not_found; @@ -6669,8 +6736,8 @@ int tep_register_event_handler(struct tep_handle *pevent, int id, } handle->func = func; - handle->next = pevent->handlers; - pevent->handlers = handle; + handle->next = tep->handlers; + tep->handlers = handle; handle->context = context; return TEP_REGISTER_SUCCESS; @@ -6697,7 +6764,7 @@ static int handle_matches(struct event_handler *handler, int id, /** * tep_unregister_event_handler - unregister an existing event handler - * @pevent: the handle to the pevent + * @tep: a handle to the trace event parser context * @id: the id of the event to unregister * @sys_name: the system name the handler belongs to * @event_name: the name of the event handler @@ -6711,7 +6778,7 @@ static int handle_matches(struct event_handler *handler, int id, * * Returns 0 if handler was removed successfully, -1 if event was not found. */ -int tep_unregister_event_handler(struct tep_handle *pevent, int id, +int tep_unregister_event_handler(struct tep_handle *tep, int id, const char *sys_name, const char *event_name, tep_event_handler_func func, void *context) { @@ -6719,7 +6786,7 @@ int tep_unregister_event_handler(struct tep_handle *pevent, int id, struct event_handler *handle; struct event_handler **next; - event = search_event(pevent, id, sys_name, event_name); + event = search_event(tep, id, sys_name, event_name); if (event == NULL) goto not_found; @@ -6733,7 +6800,7 @@ int tep_unregister_event_handler(struct tep_handle *pevent, int id, } not_found: - for (next = &pevent->handlers; *next; next = &(*next)->next) { + for (next = &tep->handlers; *next; next = &(*next)->next) { handle = *next; if (handle_matches(handle, id, sys_name, event_name, func, context)) @@ -6750,23 +6817,23 @@ not_found: } /** - * tep_alloc - create a pevent handle + * tep_alloc - create a tep handle */ struct tep_handle *tep_alloc(void) { - struct tep_handle *pevent = calloc(1, sizeof(*pevent)); + struct tep_handle *tep = calloc(1, sizeof(*tep)); - if (pevent) { - pevent->ref_count = 1; - pevent->host_bigendian = tep_host_bigendian(); + if (tep) { + tep->ref_count = 1; + tep->host_bigendian = tep_is_bigendian(); } - return pevent; + return tep; } -void tep_ref(struct tep_handle *pevent) +void tep_ref(struct tep_handle *tep) { - pevent->ref_count++; + tep->ref_count++; } int tep_get_ref(struct tep_handle *tep) @@ -6816,10 +6883,10 @@ void tep_free_event(struct tep_event *event) } /** - * tep_free - free a pevent handle - * @pevent: the pevent handle to free + * tep_free - free a tep handle + * @tep: the tep handle to free */ -void tep_free(struct tep_handle *pevent) +void tep_free(struct tep_handle *tep) { struct cmdline_list *cmdlist, *cmdnext; struct func_list *funclist, *funcnext; @@ -6828,21 +6895,21 @@ void tep_free(struct tep_handle *pevent) struct event_handler *handle; int i; - if (!pevent) + if (!tep) return; - cmdlist = pevent->cmdlist; - funclist = pevent->funclist; - printklist = pevent->printklist; + cmdlist = tep->cmdlist; + funclist = tep->funclist; + printklist = tep->printklist; - pevent->ref_count--; - if (pevent->ref_count) + tep->ref_count--; + if (tep->ref_count) return; - if (pevent->cmdlines) { - for (i = 0; i < pevent->cmdline_count; i++) - free(pevent->cmdlines[i].comm); - free(pevent->cmdlines); + if (tep->cmdlines) { + for (i = 0; i < tep->cmdline_count; i++) + free(tep->cmdlines[i].comm); + free(tep->cmdlines); } while (cmdlist) { @@ -6852,12 +6919,12 @@ void tep_free(struct tep_handle *pevent) cmdlist = cmdnext; } - if (pevent->func_map) { - for (i = 0; i < (int)pevent->func_count; i++) { - free(pevent->func_map[i].func); - free(pevent->func_map[i].mod); + if (tep->func_map) { + for (i = 0; i < (int)tep->func_count; i++) { + free(tep->func_map[i].func); + free(tep->func_map[i].mod); } - free(pevent->func_map); + free(tep->func_map); } while (funclist) { @@ -6868,16 +6935,16 @@ void tep_free(struct tep_handle *pevent) funclist = funcnext; } - while (pevent->func_handlers) { - func_handler = pevent->func_handlers; - pevent->func_handlers = func_handler->next; + while (tep->func_handlers) { + func_handler = tep->func_handlers; + tep->func_handlers = func_handler->next; free_func_handle(func_handler); } - if (pevent->printk_map) { - for (i = 0; i < (int)pevent->printk_count; i++) - free(pevent->printk_map[i].printk); - free(pevent->printk_map); + if (tep->printk_map) { + for (i = 0; i < (int)tep->printk_count; i++) + free(tep->printk_map[i].printk); + free(tep->printk_map); } while (printklist) { @@ -6887,24 +6954,24 @@ void tep_free(struct tep_handle *pevent) printklist = printknext; } - for (i = 0; i < pevent->nr_events; i++) - tep_free_event(pevent->events[i]); + for (i = 0; i < tep->nr_events; i++) + tep_free_event(tep->events[i]); - while (pevent->handlers) { - handle = pevent->handlers; - pevent->handlers = handle->next; + while (tep->handlers) { + handle = tep->handlers; + tep->handlers = handle->next; free_handler(handle); } - free(pevent->trace_clock); - free(pevent->events); - free(pevent->sort_events); - free(pevent->func_resolver); + free(tep->trace_clock); + free(tep->events); + free(tep->sort_events); + free(tep->func_resolver); - free(pevent); + free(tep); } -void tep_unref(struct tep_handle *pevent) +void tep_unref(struct tep_handle *tep) { - tep_free(pevent); + tep_free(tep); } diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h index aec48f2aea8a..642f68ab5fb2 100644 --- a/tools/lib/traceevent/event-parse.h +++ b/tools/lib/traceevent/event-parse.h @@ -64,8 +64,8 @@ typedef int (*tep_event_handler_func)(struct trace_seq *s, struct tep_event *event, void *context); -typedef int (*tep_plugin_load_func)(struct tep_handle *pevent); -typedef int (*tep_plugin_unload_func)(struct tep_handle *pevent); +typedef int (*tep_plugin_load_func)(struct tep_handle *tep); +typedef int (*tep_plugin_unload_func)(struct tep_handle *tep); struct tep_plugin_option { struct tep_plugin_option *next; @@ -85,12 +85,12 @@ struct tep_plugin_option { * TEP_PLUGIN_LOADER: (required) * The function name to initialized the plugin. * - * int TEP_PLUGIN_LOADER(struct tep_handle *pevent) + * int TEP_PLUGIN_LOADER(struct tep_handle *tep) * * TEP_PLUGIN_UNLOADER: (optional) * The function called just before unloading * - * int TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) + * int TEP_PLUGIN_UNLOADER(struct tep_handle *tep) * * TEP_PLUGIN_OPTIONS: (optional) * Plugin options that can be set before loading @@ -278,7 +278,7 @@ struct tep_print_fmt { }; struct tep_event { - struct tep_handle *pevent; + struct tep_handle *tep; char *name; int id; int flags; @@ -393,9 +393,9 @@ struct tep_plugin_list; #define INVALID_PLUGIN_LIST_OPTION ((char **)((unsigned long)-1)) -struct tep_plugin_list *tep_load_plugins(struct tep_handle *pevent); +struct tep_plugin_list *tep_load_plugins(struct tep_handle *tep); void tep_unload_plugins(struct tep_plugin_list *plugin_list, - struct tep_handle *pevent); + struct tep_handle *tep); char **tep_plugin_list_options(void); void tep_plugin_free_options_list(char **list); int tep_plugin_add_options(const char *name, @@ -409,8 +409,10 @@ void tep_print_plugins(struct trace_seq *s, typedef char *(tep_func_resolver_t)(void *priv, unsigned long long *addrp, char **modp); void tep_set_flag(struct tep_handle *tep, int flag); +void tep_clear_flag(struct tep_handle *tep, enum tep_flag flag); +bool tep_test_flag(struct tep_handle *tep, enum tep_flag flags); -static inline int tep_host_bigendian(void) +static inline int tep_is_bigendian(void) { unsigned char str[] = { 0x1, 0x2, 0x3, 0x4 }; unsigned int val; @@ -428,37 +430,37 @@ enum trace_flag_type { TRACE_FLAG_SOFTIRQ = 0x10, }; -int tep_set_function_resolver(struct tep_handle *pevent, +int tep_set_function_resolver(struct tep_handle *tep, tep_func_resolver_t *func, void *priv); -void tep_reset_function_resolver(struct tep_handle *pevent); -int tep_register_comm(struct tep_handle *pevent, const char *comm, int pid); -int tep_override_comm(struct tep_handle *pevent, const char *comm, int pid); -int tep_register_trace_clock(struct tep_handle *pevent, const char *trace_clock); -int tep_register_function(struct tep_handle *pevent, char *name, +void tep_reset_function_resolver(struct tep_handle *tep); +int tep_register_comm(struct tep_handle *tep, const char *comm, int pid); +int tep_override_comm(struct tep_handle *tep, const char *comm, int pid); +int tep_register_trace_clock(struct tep_handle *tep, const char *trace_clock); +int tep_register_function(struct tep_handle *tep, char *name, unsigned long long addr, char *mod); -int tep_register_print_string(struct tep_handle *pevent, const char *fmt, +int tep_register_print_string(struct tep_handle *tep, const char *fmt, unsigned long long addr); -int tep_pid_is_registered(struct tep_handle *pevent, int pid); +bool tep_is_pid_registered(struct tep_handle *tep, int pid); -void tep_print_event_task(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event_task(struct tep_handle *tep, struct trace_seq *s, struct tep_event *event, struct tep_record *record); -void tep_print_event_time(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event_time(struct tep_handle *tep, struct trace_seq *s, struct tep_event *event, struct tep_record *record, bool use_trace_clock); -void tep_print_event_data(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event_data(struct tep_handle *tep, struct trace_seq *s, struct tep_event *event, struct tep_record *record); -void tep_print_event(struct tep_handle *pevent, struct trace_seq *s, +void tep_print_event(struct tep_handle *tep, struct trace_seq *s, struct tep_record *record, bool use_trace_clock); -int tep_parse_header_page(struct tep_handle *pevent, char *buf, unsigned long size, +int tep_parse_header_page(struct tep_handle *tep, char *buf, unsigned long size, int long_size); -enum tep_errno tep_parse_event(struct tep_handle *pevent, const char *buf, +enum tep_errno tep_parse_event(struct tep_handle *tep, const char *buf, unsigned long size, const char *sys); -enum tep_errno tep_parse_format(struct tep_handle *pevent, +enum tep_errno tep_parse_format(struct tep_handle *tep, struct tep_event **eventp, const char *buf, unsigned long size, const char *sys); @@ -490,50 +492,50 @@ enum tep_reg_handler { TEP_REGISTER_SUCCESS_OVERWRITE, }; -int tep_register_event_handler(struct tep_handle *pevent, int id, +int tep_register_event_handler(struct tep_handle *tep, int id, const char *sys_name, const char *event_name, tep_event_handler_func func, void *context); -int tep_unregister_event_handler(struct tep_handle *pevent, int id, +int tep_unregister_event_handler(struct tep_handle *tep, int id, const char *sys_name, const char *event_name, tep_event_handler_func func, void *context); -int tep_register_print_function(struct tep_handle *pevent, +int tep_register_print_function(struct tep_handle *tep, tep_func_handler func, enum tep_func_arg_type ret_type, char *name, ...); -int tep_unregister_print_function(struct tep_handle *pevent, +int tep_unregister_print_function(struct tep_handle *tep, tep_func_handler func, char *name); struct tep_format_field *tep_find_common_field(struct tep_event *event, const char *name); struct tep_format_field *tep_find_field(struct tep_event *event, const char *name); struct tep_format_field *tep_find_any_field(struct tep_event *event, const char *name); -const char *tep_find_function(struct tep_handle *pevent, unsigned long long addr); +const char *tep_find_function(struct tep_handle *tep, unsigned long long addr); unsigned long long -tep_find_function_address(struct tep_handle *pevent, unsigned long long addr); -unsigned long long tep_read_number(struct tep_handle *pevent, const void *ptr, int size); +tep_find_function_address(struct tep_handle *tep, unsigned long long addr); +unsigned long long tep_read_number(struct tep_handle *tep, const void *ptr, int size); int tep_read_number_field(struct tep_format_field *field, const void *data, unsigned long long *value); struct tep_event *tep_get_first_event(struct tep_handle *tep); int tep_get_events_count(struct tep_handle *tep); -struct tep_event *tep_find_event(struct tep_handle *pevent, int id); +struct tep_event *tep_find_event(struct tep_handle *tep, int id); struct tep_event * -tep_find_event_by_name(struct tep_handle *pevent, const char *sys, const char *name); +tep_find_event_by_name(struct tep_handle *tep, const char *sys, const char *name); struct tep_event * -tep_find_event_by_record(struct tep_handle *pevent, struct tep_record *record); - -void tep_data_lat_fmt(struct tep_handle *pevent, - struct trace_seq *s, struct tep_record *record); -int tep_data_type(struct tep_handle *pevent, struct tep_record *rec); -int tep_data_pid(struct tep_handle *pevent, struct tep_record *rec); -int tep_data_preempt_count(struct tep_handle *pevent, struct tep_record *rec); -int tep_data_flags(struct tep_handle *pevent, struct tep_record *rec); -const char *tep_data_comm_from_pid(struct tep_handle *pevent, int pid); +tep_find_event_by_record(struct tep_handle *tep, struct tep_record *record); + +void tep_data_latency_format(struct tep_handle *tep, + struct trace_seq *s, struct tep_record *record); +int tep_data_type(struct tep_handle *tep, struct tep_record *rec); +int tep_data_pid(struct tep_handle *tep, struct tep_record *rec); +int tep_data_preempt_count(struct tep_handle *tep, struct tep_record *rec); +int tep_data_flags(struct tep_handle *tep, struct tep_record *rec); +const char *tep_data_comm_from_pid(struct tep_handle *tep, int pid); struct tep_cmdline; -struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char *comm, +struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *tep, const char *comm, struct tep_cmdline *next); -int tep_cmdline_pid(struct tep_handle *pevent, struct tep_cmdline *cmdline); +int tep_cmdline_pid(struct tep_handle *tep, struct tep_cmdline *cmdline); void tep_print_field(struct trace_seq *s, void *data, struct tep_format_field *field); @@ -541,10 +543,12 @@ void tep_print_fields(struct trace_seq *s, void *data, int size __maybe_unused, struct tep_event *event); void tep_event_info(struct trace_seq *s, struct tep_event *event, struct tep_record *record); -int tep_strerror(struct tep_handle *pevent, enum tep_errno errnum, +int tep_strerror(struct tep_handle *tep, enum tep_errno errnum, char *buf, size_t buflen); -struct tep_event **tep_list_events(struct tep_handle *pevent, enum tep_event_sort_type); +struct tep_event **tep_list_events(struct tep_handle *tep, enum tep_event_sort_type); +struct tep_event **tep_list_events_copy(struct tep_handle *tep, + enum tep_event_sort_type); struct tep_format_field **tep_event_common_fields(struct tep_event *event); struct tep_format_field **tep_event_fields(struct tep_event *event); @@ -552,24 +556,28 @@ enum tep_endian { TEP_LITTLE_ENDIAN = 0, TEP_BIG_ENDIAN }; -int tep_get_cpus(struct tep_handle *pevent); -void tep_set_cpus(struct tep_handle *pevent, int cpus); -int tep_get_long_size(struct tep_handle *pevent); -void tep_set_long_size(struct tep_handle *pevent, int long_size); -int tep_get_page_size(struct tep_handle *pevent); -void tep_set_page_size(struct tep_handle *pevent, int _page_size); -int tep_file_bigendian(struct tep_handle *pevent); -void tep_set_file_bigendian(struct tep_handle *pevent, enum tep_endian endian); -int tep_is_host_bigendian(struct tep_handle *pevent); -void tep_set_host_bigendian(struct tep_handle *pevent, enum tep_endian endian); -int tep_is_latency_format(struct tep_handle *pevent); -void tep_set_latency_format(struct tep_handle *pevent, int lat); -int tep_get_header_page_size(struct tep_handle *pevent); +int tep_get_cpus(struct tep_handle *tep); +void tep_set_cpus(struct tep_handle *tep, int cpus); +int tep_get_long_size(struct tep_handle *tep); +void tep_set_long_size(struct tep_handle *tep, int long_size); +int tep_get_page_size(struct tep_handle *tep); +void tep_set_page_size(struct tep_handle *tep, int _page_size); +bool tep_is_file_bigendian(struct tep_handle *tep); +void tep_set_file_bigendian(struct tep_handle *tep, enum tep_endian endian); +bool tep_is_local_bigendian(struct tep_handle *tep); +void tep_set_local_bigendian(struct tep_handle *tep, enum tep_endian endian); +bool tep_is_latency_format(struct tep_handle *tep); +void tep_set_latency_format(struct tep_handle *tep, int lat); +int tep_get_header_page_size(struct tep_handle *tep); +int tep_get_header_timestamp_size(struct tep_handle *tep); +bool tep_is_old_format(struct tep_handle *tep); +void tep_set_print_raw(struct tep_handle *tep, int print_raw); +void tep_set_test_filters(struct tep_handle *tep, int test_filters); struct tep_handle *tep_alloc(void); -void tep_free(struct tep_handle *pevent); -void tep_ref(struct tep_handle *pevent); -void tep_unref(struct tep_handle *pevent); +void tep_free(struct tep_handle *tep); +void tep_ref(struct tep_handle *tep); +void tep_unref(struct tep_handle *tep); int tep_get_ref(struct tep_handle *tep); /* access to the internal parser */ @@ -581,8 +589,8 @@ const char *tep_get_input_buf(void); unsigned long long tep_get_input_buf_ptr(void); /* for debugging */ -void tep_print_funcs(struct tep_handle *pevent); -void tep_print_printk(struct tep_handle *pevent); +void tep_print_funcs(struct tep_handle *tep); +void tep_print_printk(struct tep_handle *tep); /* ----------------------- filtering ----------------------- */ @@ -709,13 +717,13 @@ struct tep_filter_type { #define TEP_FILTER_ERROR_BUFSZ 1024 struct tep_event_filter { - struct tep_handle *pevent; + struct tep_handle *tep; int filters; struct tep_filter_type *event_filters; char error_buffer[TEP_FILTER_ERROR_BUFSZ]; }; -struct tep_event_filter *tep_filter_alloc(struct tep_handle *pevent); +struct tep_event_filter *tep_filter_alloc(struct tep_handle *tep); /* for backward compatibility */ #define FILTER_NONE TEP_ERRNO__NO_FILTER @@ -723,12 +731,6 @@ struct tep_event_filter *tep_filter_alloc(struct tep_handle *pevent); #define FILTER_MISS TEP_ERRNO__FILTER_MISS #define FILTER_MATCH TEP_ERRNO__FILTER_MATCH -enum tep_filter_trivial_type { - TEP_FILTER_TRIVIAL_FALSE, - TEP_FILTER_TRIVIAL_TRUE, - TEP_FILTER_TRIVIAL_BOTH, -}; - enum tep_errno tep_filter_add_filter_str(struct tep_event_filter *filter, const char *filter_str); @@ -743,9 +745,6 @@ int tep_event_filtered(struct tep_event_filter *filter, void tep_filter_reset(struct tep_event_filter *filter); -int tep_filter_clear_trivial(struct tep_event_filter *filter, - enum tep_filter_trivial_type type); - void tep_filter_free(struct tep_event_filter *filter); char *tep_filter_make_string(struct tep_event_filter *filter, int event_id); @@ -753,15 +752,8 @@ char *tep_filter_make_string(struct tep_event_filter *filter, int event_id); int tep_filter_remove_event(struct tep_event_filter *filter, int event_id); -int tep_filter_event_has_trivial(struct tep_event_filter *filter, - int event_id, - enum tep_filter_trivial_type type); - int tep_filter_copy(struct tep_event_filter *dest, struct tep_event_filter *source); -int tep_update_trivial(struct tep_event_filter *dest, struct tep_event_filter *source, - enum tep_filter_trivial_type type); - int tep_filter_compare(struct tep_event_filter *filter1, struct tep_event_filter *filter2); #endif /* _PARSE_EVENTS_H */ diff --git a/tools/lib/traceevent/event-plugin.c b/tools/lib/traceevent/event-plugin.c index e74f16c88398..8ca28de9337a 100644 --- a/tools/lib/traceevent/event-plugin.c +++ b/tools/lib/traceevent/event-plugin.c @@ -269,7 +269,7 @@ void tep_print_plugins(struct trace_seq *s, } static void -load_plugin(struct tep_handle *pevent, const char *path, +load_plugin(struct tep_handle *tep, const char *path, const char *file, void *data) { struct tep_plugin_list **plugin_list = data; @@ -316,7 +316,7 @@ load_plugin(struct tep_handle *pevent, const char *path, *plugin_list = list; pr_stat("registering plugin: %s", plugin); - func(pevent); + func(tep); return; out_free: @@ -324,9 +324,9 @@ load_plugin(struct tep_handle *pevent, const char *path, } static void -load_plugins_dir(struct tep_handle *pevent, const char *suffix, +load_plugins_dir(struct tep_handle *tep, const char *suffix, const char *path, - void (*load_plugin)(struct tep_handle *pevent, + void (*load_plugin)(struct tep_handle *tep, const char *path, const char *name, void *data), @@ -359,15 +359,15 @@ load_plugins_dir(struct tep_handle *pevent, const char *suffix, if (strcmp(name + (strlen(name) - strlen(suffix)), suffix) != 0) continue; - load_plugin(pevent, path, name, data); + load_plugin(tep, path, name, data); } closedir(dir); } static void -load_plugins(struct tep_handle *pevent, const char *suffix, - void (*load_plugin)(struct tep_handle *pevent, +load_plugins(struct tep_handle *tep, const char *suffix, + void (*load_plugin)(struct tep_handle *tep, const char *path, const char *name, void *data), @@ -378,7 +378,7 @@ load_plugins(struct tep_handle *pevent, const char *suffix, char *envdir; int ret; - if (pevent->flags & TEP_DISABLE_PLUGINS) + if (tep->flags & TEP_DISABLE_PLUGINS) return; /* @@ -386,8 +386,8 @@ load_plugins(struct tep_handle *pevent, const char *suffix, * check that first. */ #ifdef PLUGIN_DIR - if (!(pevent->flags & TEP_DISABLE_SYS_PLUGINS)) - load_plugins_dir(pevent, suffix, PLUGIN_DIR, + if (!(tep->flags & TEP_DISABLE_SYS_PLUGINS)) + load_plugins_dir(tep, suffix, PLUGIN_DIR, load_plugin, data); #endif @@ -397,7 +397,7 @@ load_plugins(struct tep_handle *pevent, const char *suffix, */ envdir = getenv("TRACEEVENT_PLUGIN_DIR"); if (envdir) - load_plugins_dir(pevent, suffix, envdir, load_plugin, data); + load_plugins_dir(tep, suffix, envdir, load_plugin, data); /* * Now let the home directory override the environment @@ -413,22 +413,22 @@ load_plugins(struct tep_handle *pevent, const char *suffix, return; } - load_plugins_dir(pevent, suffix, path, load_plugin, data); + load_plugins_dir(tep, suffix, path, load_plugin, data); free(path); } struct tep_plugin_list* -tep_load_plugins(struct tep_handle *pevent) +tep_load_plugins(struct tep_handle *tep) { struct tep_plugin_list *list = NULL; - load_plugins(pevent, ".so", load_plugin, &list); + load_plugins(tep, ".so", load_plugin, &list); return list; } void -tep_unload_plugins(struct tep_plugin_list *plugin_list, struct tep_handle *pevent) +tep_unload_plugins(struct tep_plugin_list *plugin_list, struct tep_handle *tep) { tep_plugin_unload_func func; struct tep_plugin_list *list; @@ -438,7 +438,7 @@ tep_unload_plugins(struct tep_plugin_list *plugin_list, struct tep_handle *peven plugin_list = list->next; func = dlsym(list->handle, TEP_PLUGIN_UNLOADER_NAME); if (func) - func(pevent); + func(tep); dlclose(list->handle); free(list->name); free(list); diff --git a/tools/lib/traceevent/kbuffer-parse.c b/tools/lib/traceevent/kbuffer-parse.c index af2a1f3b7424..b887e7437d67 100644 --- a/tools/lib/traceevent/kbuffer-parse.c +++ b/tools/lib/traceevent/kbuffer-parse.c @@ -727,3 +727,52 @@ int kbuffer_start_of_data(struct kbuffer *kbuf) { return kbuf->start; } + +/** + * kbuffer_raw_get - get raw buffer info + * @kbuf: The kbuffer + * @subbuf: Start of mapped subbuffer + * @info: Info descriptor to fill in + * + * For debugging. This can return internals of the ring buffer. + * Expects to have info->next set to what it will read. + * The type, length and timestamp delta will be filled in, and + * @info->next will be updated to the next element. + * The @subbuf is used to know if the info is passed the end of + * data and NULL will be returned if it is. + */ +struct kbuffer_raw_info * +kbuffer_raw_get(struct kbuffer *kbuf, void *subbuf, struct kbuffer_raw_info *info) +{ + unsigned long long flags; + unsigned long long delta; + unsigned int type_len; + unsigned int size; + int start; + int length; + void *ptr = info->next; + + if (!kbuf || !subbuf) + return NULL; + + if (kbuf->flags & KBUFFER_FL_LONG_8) + start = 16; + else + start = 12; + + flags = read_long(kbuf, subbuf + 8); + size = (unsigned int)flags & COMMIT_MASK; + + if (ptr < subbuf || ptr >= subbuf + start + size) + return NULL; + + type_len = translate_data(kbuf, ptr, &ptr, &delta, &length); + + info->next = ptr + length; + + info->type = type_len; + info->delta = delta; + info->length = length; + + return info; +} diff --git a/tools/lib/traceevent/kbuffer.h b/tools/lib/traceevent/kbuffer.h index 03dce757553f..ed4d697fc137 100644 --- a/tools/lib/traceevent/kbuffer.h +++ b/tools/lib/traceevent/kbuffer.h @@ -65,4 +65,17 @@ int kbuffer_subbuffer_size(struct kbuffer *kbuf); void kbuffer_set_old_format(struct kbuffer *kbuf); int kbuffer_start_of_data(struct kbuffer *kbuf); +/* Debugging */ + +struct kbuffer_raw_info { + int type; + int length; + unsigned long long delta; + void *next; +}; + +/* Read raw data */ +struct kbuffer_raw_info *kbuffer_raw_get(struct kbuffer *kbuf, void *subbuf, + struct kbuffer_raw_info *info); + #endif /* _K_BUFFER_H */ diff --git a/tools/lib/traceevent/libtraceevent.pc.template b/tools/lib/traceevent/libtraceevent.pc.template index 42e4d6cb6b9e..86384fcd57f1 100644 --- a/tools/lib/traceevent/libtraceevent.pc.template +++ b/tools/lib/traceevent/libtraceevent.pc.template @@ -1,6 +1,6 @@ prefix=INSTALL_PREFIX -libdir=${prefix}/lib64 -includedir=${prefix}/include/traceevent +libdir=LIB_DIR +includedir=HEADER_DIR Name: libtraceevent URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c index cb5ce66dab6e..552592d153fb 100644 --- a/tools/lib/traceevent/parse-filter.c +++ b/tools/lib/traceevent/parse-filter.c @@ -154,7 +154,7 @@ add_filter_type(struct tep_event_filter *filter, int id) filter_type = &filter->event_filters[i]; filter_type->event_id = id; - filter_type->event = tep_find_event(filter->pevent, id); + filter_type->event = tep_find_event(filter->tep, id); filter_type->filter = NULL; filter->filters++; @@ -164,9 +164,9 @@ add_filter_type(struct tep_event_filter *filter, int id) /** * tep_filter_alloc - create a new event filter - * @pevent: The pevent that this filter is associated with + * @tep: The tep that this filter is associated with */ -struct tep_event_filter *tep_filter_alloc(struct tep_handle *pevent) +struct tep_event_filter *tep_filter_alloc(struct tep_handle *tep) { struct tep_event_filter *filter; @@ -175,8 +175,8 @@ struct tep_event_filter *tep_filter_alloc(struct tep_handle *pevent) return NULL; memset(filter, 0, sizeof(*filter)); - filter->pevent = pevent; - tep_ref(pevent); + filter->tep = tep; + tep_ref(tep); return filter; } @@ -256,7 +256,7 @@ static int event_match(struct tep_event *event, } static enum tep_errno -find_event(struct tep_handle *pevent, struct event_list **events, +find_event(struct tep_handle *tep, struct event_list **events, char *sys_name, char *event_name) { struct tep_event *event; @@ -299,8 +299,8 @@ find_event(struct tep_handle *pevent, struct event_list **events, } } - for (i = 0; i < pevent->nr_events; i++) { - event = pevent->events[i]; + for (i = 0; i < tep->nr_events; i++) { + event = tep->events[i]; if (event_match(event, sys_name ? &sreg : NULL, &ereg)) { match = 1; if (add_event(events, event) < 0) { @@ -1257,7 +1257,7 @@ static void filter_init_error_buf(struct tep_event_filter *filter) enum tep_errno tep_filter_add_filter_str(struct tep_event_filter *filter, const char *filter_str) { - struct tep_handle *pevent = filter->pevent; + struct tep_handle *tep = filter->tep; struct event_list *event; struct event_list *events = NULL; const char *filter_start; @@ -1313,7 +1313,7 @@ enum tep_errno tep_filter_add_filter_str(struct tep_event_filter *filter, } /* Find this event */ - ret = find_event(pevent, &events, strim(sys_name), strim(event_name)); + ret = find_event(tep, &events, strim(sys_name), strim(event_name)); if (ret < 0) { free_events(events); free(this_event); @@ -1334,7 +1334,7 @@ enum tep_errno tep_filter_add_filter_str(struct tep_event_filter *filter, if (ret < 0) rtn = ret; - if (ret >= 0 && pevent->test_filters) { + if (ret >= 0 && tep->test_filters) { char *test; test = tep_filter_make_string(filter, event->event->id); if (test) { @@ -1346,9 +1346,6 @@ enum tep_errno tep_filter_add_filter_str(struct tep_event_filter *filter, free_events(events); - if (rtn >= 0 && pevent->test_filters) - exit(0); - return rtn; } @@ -1380,7 +1377,7 @@ int tep_filter_strerror(struct tep_event_filter *filter, enum tep_errno err, return 0; } - return tep_strerror(filter->pevent, err, buf, buflen); + return tep_strerror(filter->tep, err, buf, buflen); } /** @@ -1443,7 +1440,7 @@ void tep_filter_reset(struct tep_event_filter *filter) void tep_filter_free(struct tep_event_filter *filter) { - tep_unref(filter->pevent); + tep_unref(filter->tep); tep_filter_reset(filter); @@ -1462,10 +1459,10 @@ static int copy_filter_type(struct tep_event_filter *filter, const char *name; char *str; - /* Can't assume that the pevent's are the same */ + /* Can't assume that the tep's are the same */ sys = filter_type->event->system; name = filter_type->event->name; - event = tep_find_event_by_name(filter->pevent, sys, name); + event = tep_find_event_by_name(filter->tep, sys, name); if (!event) return -1; @@ -1522,167 +1519,6 @@ int tep_filter_copy(struct tep_event_filter *dest, struct tep_event_filter *sour return ret; } - -/** - * tep_update_trivial - update the trivial filters with the given filter - * @dest - the filter to update - * @source - the filter as the source of the update - * @type - the type of trivial filter to update. - * - * Scan dest for trivial events matching @type to replace with the source. - * - * Returns 0 on success and -1 if there was a problem updating, but - * events may have still been updated on error. - */ -int tep_update_trivial(struct tep_event_filter *dest, struct tep_event_filter *source, - enum tep_filter_trivial_type type) -{ - struct tep_handle *src_pevent; - struct tep_handle *dest_pevent; - struct tep_event *event; - struct tep_filter_type *filter_type; - struct tep_filter_arg *arg; - char *str; - int i; - - src_pevent = source->pevent; - dest_pevent = dest->pevent; - - /* Do nothing if either of the filters has nothing to filter */ - if (!dest->filters || !source->filters) - return 0; - - for (i = 0; i < dest->filters; i++) { - filter_type = &dest->event_filters[i]; - arg = filter_type->filter; - if (arg->type != TEP_FILTER_ARG_BOOLEAN) - continue; - if ((arg->boolean.value && type == TEP_FILTER_TRIVIAL_FALSE) || - (!arg->boolean.value && type == TEP_FILTER_TRIVIAL_TRUE)) - continue; - - event = filter_type->event; - - if (src_pevent != dest_pevent) { - /* do a look up */ - event = tep_find_event_by_name(src_pevent, - event->system, - event->name); - if (!event) - return -1; - } - - str = tep_filter_make_string(source, event->id); - if (!str) - continue; - - /* Don't bother if the filter is trivial too */ - if (strcmp(str, "TRUE") != 0 && strcmp(str, "FALSE") != 0) - filter_event(dest, event, str, NULL); - free(str); - } - return 0; -} - -/** - * tep_filter_clear_trivial - clear TRUE and FALSE filters - * @filter: the filter to remove trivial filters from - * @type: remove only true, false, or both - * - * Removes filters that only contain a TRUE or FALES boolean arg. - * - * Returns 0 on success and -1 if there was a problem. - */ -int tep_filter_clear_trivial(struct tep_event_filter *filter, - enum tep_filter_trivial_type type) -{ - struct tep_filter_type *filter_type; - int count = 0; - int *ids = NULL; - int i; - - if (!filter->filters) - return 0; - - /* - * Two steps, first get all ids with trivial filters. - * then remove those ids. - */ - for (i = 0; i < filter->filters; i++) { - int *new_ids; - - filter_type = &filter->event_filters[i]; - if (filter_type->filter->type != TEP_FILTER_ARG_BOOLEAN) - continue; - switch (type) { - case TEP_FILTER_TRIVIAL_FALSE: - if (filter_type->filter->boolean.value) - continue; - break; - case TEP_FILTER_TRIVIAL_TRUE: - if (!filter_type->filter->boolean.value) - continue; - default: - break; - } - - new_ids = realloc(ids, sizeof(*ids) * (count + 1)); - if (!new_ids) { - free(ids); - return -1; - } - - ids = new_ids; - ids[count++] = filter_type->event_id; - } - - if (!count) - return 0; - - for (i = 0; i < count; i++) - tep_filter_remove_event(filter, ids[i]); - - free(ids); - return 0; -} - -/** - * tep_filter_event_has_trivial - return true event contains trivial filter - * @filter: the filter with the information - * @event_id: the id of the event to test - * @type: trivial type to test for (TRUE, FALSE, EITHER) - * - * Returns 1 if the event contains a matching trivial type - * otherwise 0. - */ -int tep_filter_event_has_trivial(struct tep_event_filter *filter, - int event_id, - enum tep_filter_trivial_type type) -{ - struct tep_filter_type *filter_type; - - if (!filter->filters) - return 0; - - filter_type = find_filter_type(filter, event_id); - - if (!filter_type) - return 0; - - if (filter_type->filter->type != TEP_FILTER_ARG_BOOLEAN) - return 0; - - switch (type) { - case TEP_FILTER_TRIVIAL_FALSE: - return !filter_type->filter->boolean.value; - - case TEP_FILTER_TRIVIAL_TRUE: - return filter_type->filter->boolean.value; - default: - return 1; - } -} - static int test_filter(struct tep_event *event, struct tep_filter_arg *arg, struct tep_record *record, enum tep_errno *err); @@ -1692,8 +1528,8 @@ get_comm(struct tep_event *event, struct tep_record *record) const char *comm; int pid; - pid = tep_data_pid(event->pevent, record); - comm = tep_data_comm_from_pid(event->pevent, pid); + pid = tep_data_pid(event->tep, record); + comm = tep_data_comm_from_pid(event->tep, pid); return comm; } @@ -1861,7 +1697,7 @@ static int test_num(struct tep_event *event, struct tep_filter_arg *arg, static const char *get_field_str(struct tep_filter_arg *arg, struct tep_record *record) { struct tep_event *event; - struct tep_handle *pevent; + struct tep_handle *tep; unsigned long long addr; const char *val = NULL; unsigned int size; @@ -1891,12 +1727,12 @@ static const char *get_field_str(struct tep_filter_arg *arg, struct tep_record * } else { event = arg->str.field->event; - pevent = event->pevent; + tep = event->tep; addr = get_value(event, arg->str.field, record); if (arg->str.field->flags & (TEP_FIELD_IS_POINTER | TEP_FIELD_IS_LONG)) /* convert to a kernel symbol */ - val = tep_find_function(pevent, addr); + val = tep_find_function(tep, addr); if (val == NULL) { /* just use the hex of the string name */ @@ -2036,7 +1872,7 @@ int tep_event_filtered(struct tep_event_filter *filter, int event_id) enum tep_errno tep_filter_match(struct tep_event_filter *filter, struct tep_record *record) { - struct tep_handle *pevent = filter->pevent; + struct tep_handle *tep = filter->tep; struct tep_filter_type *filter_type; int event_id; int ret; @@ -2047,7 +1883,7 @@ enum tep_errno tep_filter_match(struct tep_event_filter *filter, if (!filter->filters) return TEP_ERRNO__NO_FILTER; - event_id = tep_data_type(pevent, record); + event_id = tep_data_type(tep, record); filter_type = find_filter_type(filter, event_id); if (!filter_type) @@ -2409,14 +2245,6 @@ int tep_filter_compare(struct tep_event_filter *filter1, struct tep_event_filter break; if (filter_type1->filter->type != filter_type2->filter->type) break; - switch (filter_type1->filter->type) { - case TEP_FILTER_TRIVIAL_FALSE: - case TEP_FILTER_TRIVIAL_TRUE: - /* trivial types just need the type compared */ - continue; - default: - break; - } /* The best way to compare complex filters is with strings */ str1 = arg_to_str(filter1, filter_type1->filter); str2 = arg_to_str(filter2, filter_type2->filter); diff --git a/tools/lib/traceevent/parse-utils.c b/tools/lib/traceevent/parse-utils.c index 77e4ec6402dd..e99867111387 100644 --- a/tools/lib/traceevent/parse-utils.c +++ b/tools/lib/traceevent/parse-utils.c @@ -14,7 +14,7 @@ void __vwarning(const char *fmt, va_list ap) { if (errno) - perror("trace-cmd"); + perror("libtraceevent"); errno = 0; fprintf(stderr, " "); diff --git a/tools/lib/traceevent/plugin_cfg80211.c b/tools/lib/traceevent/plugin_cfg80211.c index a51b366f47da..3d43b56a6c98 100644 --- a/tools/lib/traceevent/plugin_cfg80211.c +++ b/tools/lib/traceevent/plugin_cfg80211.c @@ -25,9 +25,9 @@ process___le16_to_cpup(struct trace_seq *s, unsigned long long *args) return val ? (long long) le16toh(*val) : 0; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_print_function(pevent, + tep_register_print_function(tep, process___le16_to_cpup, TEP_FUNC_ARG_INT, "__le16_to_cpup", @@ -36,8 +36,8 @@ int TEP_PLUGIN_LOADER(struct tep_handle *pevent) return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_print_function(pevent, process___le16_to_cpup, + tep_unregister_print_function(tep, process___le16_to_cpup, "__le16_to_cpup"); } diff --git a/tools/lib/traceevent/plugin_function.c b/tools/lib/traceevent/plugin_function.c index a73eca34a8f9..7770fcb78e0f 100644 --- a/tools/lib/traceevent/plugin_function.c +++ b/tools/lib/traceevent/plugin_function.c @@ -126,7 +126,7 @@ static int add_and_get_index(const char *parent, const char *child, int cpu) static int function_handler(struct trace_seq *s, struct tep_record *record, struct tep_event *event, void *context) { - struct tep_handle *pevent = event->pevent; + struct tep_handle *tep = event->tep; unsigned long long function; unsigned long long pfunction; const char *func; @@ -136,12 +136,12 @@ static int function_handler(struct trace_seq *s, struct tep_record *record, if (tep_get_field_val(s, event, "ip", record, &function, 1)) return trace_seq_putc(s, '!'); - func = tep_find_function(pevent, function); + func = tep_find_function(tep, function); if (tep_get_field_val(s, event, "parent_ip", record, &pfunction, 1)) return trace_seq_putc(s, '!'); - parent = tep_find_function(pevent, pfunction); + parent = tep_find_function(tep, pfunction); if (parent && ftrace_indent->set) index = add_and_get_index(parent, func, record->cpu); @@ -164,9 +164,9 @@ static int function_handler(struct trace_seq *s, struct tep_record *record, return 0; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_event_handler(pevent, -1, "ftrace", "function", + tep_register_event_handler(tep, -1, "ftrace", "function", function_handler, NULL); tep_plugin_add_options("ftrace", plugin_options); @@ -174,11 +174,11 @@ int TEP_PLUGIN_LOADER(struct tep_handle *pevent) return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { int i, x; - tep_unregister_event_handler(pevent, -1, "ftrace", "function", + tep_unregister_event_handler(tep, -1, "ftrace", "function", function_handler, NULL); for (i = 0; i <= cpus; i++) { diff --git a/tools/lib/traceevent/plugin_hrtimer.c b/tools/lib/traceevent/plugin_hrtimer.c index 5db5e401275f..bb434e0ed03a 100644 --- a/tools/lib/traceevent/plugin_hrtimer.c +++ b/tools/lib/traceevent/plugin_hrtimer.c @@ -67,23 +67,23 @@ static int timer_start_handler(struct trace_seq *s, return 0; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_event_handler(pevent, -1, + tep_register_event_handler(tep, -1, "timer", "hrtimer_expire_entry", timer_expire_handler, NULL); - tep_register_event_handler(pevent, -1, "timer", "hrtimer_start", + tep_register_event_handler(tep, -1, "timer", "hrtimer_start", timer_start_handler, NULL); return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_event_handler(pevent, -1, + tep_unregister_event_handler(tep, -1, "timer", "hrtimer_expire_entry", timer_expire_handler, NULL); - tep_unregister_event_handler(pevent, -1, "timer", "hrtimer_start", + tep_unregister_event_handler(tep, -1, "timer", "hrtimer_start", timer_start_handler, NULL); } diff --git a/tools/lib/traceevent/plugin_jbd2.c b/tools/lib/traceevent/plugin_jbd2.c index a5e34135dd6a..04fc125f38cb 100644 --- a/tools/lib/traceevent/plugin_jbd2.c +++ b/tools/lib/traceevent/plugin_jbd2.c @@ -48,16 +48,16 @@ process_jiffies_to_msecs(struct trace_seq *s, unsigned long long *args) return jiffies; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_print_function(pevent, + tep_register_print_function(tep, process_jbd2_dev_to_name, TEP_FUNC_ARG_STRING, "jbd2_dev_to_name", TEP_FUNC_ARG_INT, TEP_FUNC_ARG_VOID); - tep_register_print_function(pevent, + tep_register_print_function(tep, process_jiffies_to_msecs, TEP_FUNC_ARG_LONG, "jiffies_to_msecs", @@ -66,11 +66,11 @@ int TEP_PLUGIN_LOADER(struct tep_handle *pevent) return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_print_function(pevent, process_jbd2_dev_to_name, + tep_unregister_print_function(tep, process_jbd2_dev_to_name, "jbd2_dev_to_name"); - tep_unregister_print_function(pevent, process_jiffies_to_msecs, + tep_unregister_print_function(tep, process_jiffies_to_msecs, "jiffies_to_msecs"); } diff --git a/tools/lib/traceevent/plugin_kmem.c b/tools/lib/traceevent/plugin_kmem.c index 0e3c601f9ed1..edaec5d962c3 100644 --- a/tools/lib/traceevent/plugin_kmem.c +++ b/tools/lib/traceevent/plugin_kmem.c @@ -39,57 +39,57 @@ static int call_site_handler(struct trace_seq *s, struct tep_record *record, if (tep_read_number_field(field, data, &val)) return 1; - func = tep_find_function(event->pevent, val); + func = tep_find_function(event->tep, val); if (!func) return 1; - addr = tep_find_function_address(event->pevent, val); + addr = tep_find_function_address(event->tep, val); trace_seq_printf(s, "(%s+0x%x) ", func, (int)(val - addr)); return 1; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_event_handler(pevent, -1, "kmem", "kfree", + tep_register_event_handler(tep, -1, "kmem", "kfree", call_site_handler, NULL); - tep_register_event_handler(pevent, -1, "kmem", "kmalloc", + tep_register_event_handler(tep, -1, "kmem", "kmalloc", call_site_handler, NULL); - tep_register_event_handler(pevent, -1, "kmem", "kmalloc_node", + tep_register_event_handler(tep, -1, "kmem", "kmalloc_node", call_site_handler, NULL); - tep_register_event_handler(pevent, -1, "kmem", "kmem_cache_alloc", + tep_register_event_handler(tep, -1, "kmem", "kmem_cache_alloc", call_site_handler, NULL); - tep_register_event_handler(pevent, -1, "kmem", + tep_register_event_handler(tep, -1, "kmem", "kmem_cache_alloc_node", call_site_handler, NULL); - tep_register_event_handler(pevent, -1, "kmem", "kmem_cache_free", + tep_register_event_handler(tep, -1, "kmem", "kmem_cache_free", call_site_handler, NULL); return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_event_handler(pevent, -1, "kmem", "kfree", + tep_unregister_event_handler(tep, -1, "kmem", "kfree", call_site_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kmem", "kmalloc", + tep_unregister_event_handler(tep, -1, "kmem", "kmalloc", call_site_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kmem", "kmalloc_node", + tep_unregister_event_handler(tep, -1, "kmem", "kmalloc_node", call_site_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kmem", "kmem_cache_alloc", + tep_unregister_event_handler(tep, -1, "kmem", "kmem_cache_alloc", call_site_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kmem", + tep_unregister_event_handler(tep, -1, "kmem", "kmem_cache_alloc_node", call_site_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kmem", "kmem_cache_free", + tep_unregister_event_handler(tep, -1, "kmem", "kmem_cache_free", call_site_handler, NULL); } diff --git a/tools/lib/traceevent/plugin_kvm.c b/tools/lib/traceevent/plugin_kvm.c index 64b9c25a1fd3..c8e623065a7e 100644 --- a/tools/lib/traceevent/plugin_kvm.c +++ b/tools/lib/traceevent/plugin_kvm.c @@ -389,8 +389,8 @@ static int kvm_mmu_print_role(struct trace_seq *s, struct tep_record *record, * We can only use the structure if file is of the same * endianness. */ - if (tep_file_bigendian(event->pevent) == - tep_is_host_bigendian(event->pevent)) { + if (tep_is_file_bigendian(event->tep) == + tep_is_local_bigendian(event->tep)) { trace_seq_printf(s, "%u q%u%s %s%s %spae %snxe %swp%s%s%s", role.level, @@ -445,40 +445,40 @@ process_is_writable_pte(struct trace_seq *s, unsigned long long *args) return pte & PT_WRITABLE_MASK; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { init_disassembler(); - tep_register_event_handler(pevent, -1, "kvm", "kvm_exit", + tep_register_event_handler(tep, -1, "kvm", "kvm_exit", kvm_exit_handler, NULL); - tep_register_event_handler(pevent, -1, "kvm", "kvm_emulate_insn", + tep_register_event_handler(tep, -1, "kvm", "kvm_emulate_insn", kvm_emulate_insn_handler, NULL); - tep_register_event_handler(pevent, -1, "kvm", "kvm_nested_vmexit", + tep_register_event_handler(tep, -1, "kvm", "kvm_nested_vmexit", kvm_nested_vmexit_handler, NULL); - tep_register_event_handler(pevent, -1, "kvm", "kvm_nested_vmexit_inject", + tep_register_event_handler(tep, -1, "kvm", "kvm_nested_vmexit_inject", kvm_nested_vmexit_inject_handler, NULL); - tep_register_event_handler(pevent, -1, "kvmmmu", "kvm_mmu_get_page", + tep_register_event_handler(tep, -1, "kvmmmu", "kvm_mmu_get_page", kvm_mmu_get_page_handler, NULL); - tep_register_event_handler(pevent, -1, "kvmmmu", "kvm_mmu_sync_page", + tep_register_event_handler(tep, -1, "kvmmmu", "kvm_mmu_sync_page", kvm_mmu_print_role, NULL); - tep_register_event_handler(pevent, -1, + tep_register_event_handler(tep, -1, "kvmmmu", "kvm_mmu_unsync_page", kvm_mmu_print_role, NULL); - tep_register_event_handler(pevent, -1, "kvmmmu", "kvm_mmu_zap_page", + tep_register_event_handler(tep, -1, "kvmmmu", "kvm_mmu_zap_page", kvm_mmu_print_role, NULL); - tep_register_event_handler(pevent, -1, "kvmmmu", + tep_register_event_handler(tep, -1, "kvmmmu", "kvm_mmu_prepare_zap_page", kvm_mmu_print_role, NULL); - tep_register_print_function(pevent, + tep_register_print_function(tep, process_is_writable_pte, TEP_FUNC_ARG_INT, "is_writable_pte", @@ -487,37 +487,37 @@ int TEP_PLUGIN_LOADER(struct tep_handle *pevent) return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_event_handler(pevent, -1, "kvm", "kvm_exit", + tep_unregister_event_handler(tep, -1, "kvm", "kvm_exit", kvm_exit_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kvm", "kvm_emulate_insn", + tep_unregister_event_handler(tep, -1, "kvm", "kvm_emulate_insn", kvm_emulate_insn_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kvm", "kvm_nested_vmexit", + tep_unregister_event_handler(tep, -1, "kvm", "kvm_nested_vmexit", kvm_nested_vmexit_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kvm", "kvm_nested_vmexit_inject", + tep_unregister_event_handler(tep, -1, "kvm", "kvm_nested_vmexit_inject", kvm_nested_vmexit_inject_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kvmmmu", "kvm_mmu_get_page", + tep_unregister_event_handler(tep, -1, "kvmmmu", "kvm_mmu_get_page", kvm_mmu_get_page_handler, NULL); - tep_unregister_event_handler(pevent, -1, "kvmmmu", "kvm_mmu_sync_page", + tep_unregister_event_handler(tep, -1, "kvmmmu", "kvm_mmu_sync_page", kvm_mmu_print_role, NULL); - tep_unregister_event_handler(pevent, -1, + tep_unregister_event_handler(tep, -1, "kvmmmu", "kvm_mmu_unsync_page", kvm_mmu_print_role, NULL); - tep_unregister_event_handler(pevent, -1, "kvmmmu", "kvm_mmu_zap_page", + tep_unregister_event_handler(tep, -1, "kvmmmu", "kvm_mmu_zap_page", kvm_mmu_print_role, NULL); - tep_unregister_event_handler(pevent, -1, "kvmmmu", + tep_unregister_event_handler(tep, -1, "kvmmmu", "kvm_mmu_prepare_zap_page", kvm_mmu_print_role, NULL); - tep_unregister_print_function(pevent, process_is_writable_pte, + tep_unregister_print_function(tep, process_is_writable_pte, "is_writable_pte"); } diff --git a/tools/lib/traceevent/plugin_mac80211.c b/tools/lib/traceevent/plugin_mac80211.c index e38b9477aad2..884303c26b5c 100644 --- a/tools/lib/traceevent/plugin_mac80211.c +++ b/tools/lib/traceevent/plugin_mac80211.c @@ -87,17 +87,17 @@ static int drv_bss_info_changed(struct trace_seq *s, return 0; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_event_handler(pevent, -1, "mac80211", + tep_register_event_handler(tep, -1, "mac80211", "drv_bss_info_changed", drv_bss_info_changed, NULL); return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_event_handler(pevent, -1, "mac80211", + tep_unregister_event_handler(tep, -1, "mac80211", "drv_bss_info_changed", drv_bss_info_changed, NULL); } diff --git a/tools/lib/traceevent/plugin_sched_switch.c b/tools/lib/traceevent/plugin_sched_switch.c index 834c9e378ff8..957389a0ff7a 100644 --- a/tools/lib/traceevent/plugin_sched_switch.c +++ b/tools/lib/traceevent/plugin_sched_switch.c @@ -62,7 +62,7 @@ static void write_and_save_comm(struct tep_format_field *field, comm = &s->buffer[len]; /* Help out the comm to ids. This will handle dups */ - tep_register_comm(field->event->pevent, comm, pid); + tep_register_comm(field->event->tep, comm, pid); } static int sched_wakeup_handler(struct trace_seq *s, @@ -135,27 +135,27 @@ static int sched_switch_handler(struct trace_seq *s, return 0; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_event_handler(pevent, -1, "sched", "sched_switch", + tep_register_event_handler(tep, -1, "sched", "sched_switch", sched_switch_handler, NULL); - tep_register_event_handler(pevent, -1, "sched", "sched_wakeup", + tep_register_event_handler(tep, -1, "sched", "sched_wakeup", sched_wakeup_handler, NULL); - tep_register_event_handler(pevent, -1, "sched", "sched_wakeup_new", + tep_register_event_handler(tep, -1, "sched", "sched_wakeup_new", sched_wakeup_handler, NULL); return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_event_handler(pevent, -1, "sched", "sched_switch", + tep_unregister_event_handler(tep, -1, "sched", "sched_switch", sched_switch_handler, NULL); - tep_unregister_event_handler(pevent, -1, "sched", "sched_wakeup", + tep_unregister_event_handler(tep, -1, "sched", "sched_wakeup", sched_wakeup_handler, NULL); - tep_unregister_event_handler(pevent, -1, "sched", "sched_wakeup_new", + tep_unregister_event_handler(tep, -1, "sched", "sched_wakeup_new", sched_wakeup_handler, NULL); } diff --git a/tools/lib/traceevent/plugin_scsi.c b/tools/lib/traceevent/plugin_scsi.c index 4eba25cc1431..5d0387a4b65a 100644 --- a/tools/lib/traceevent/plugin_scsi.c +++ b/tools/lib/traceevent/plugin_scsi.c @@ -414,9 +414,9 @@ unsigned long long process_scsi_trace_parse_cdb(struct trace_seq *s, return 0; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_print_function(pevent, + tep_register_print_function(tep, process_scsi_trace_parse_cdb, TEP_FUNC_ARG_STRING, "scsi_trace_parse_cdb", @@ -427,8 +427,8 @@ int TEP_PLUGIN_LOADER(struct tep_handle *pevent) return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_print_function(pevent, process_scsi_trace_parse_cdb, + tep_unregister_print_function(tep, process_scsi_trace_parse_cdb, "scsi_trace_parse_cdb"); } diff --git a/tools/lib/traceevent/plugin_xen.c b/tools/lib/traceevent/plugin_xen.c index bc0496e4c296..993b208d0323 100644 --- a/tools/lib/traceevent/plugin_xen.c +++ b/tools/lib/traceevent/plugin_xen.c @@ -120,9 +120,9 @@ unsigned long long process_xen_hypercall_name(struct trace_seq *s, return 0; } -int TEP_PLUGIN_LOADER(struct tep_handle *pevent) +int TEP_PLUGIN_LOADER(struct tep_handle *tep) { - tep_register_print_function(pevent, + tep_register_print_function(tep, process_xen_hypercall_name, TEP_FUNC_ARG_STRING, "xen_hypercall_name", @@ -131,8 +131,8 @@ int TEP_PLUGIN_LOADER(struct tep_handle *pevent) return 0; } -void TEP_PLUGIN_UNLOADER(struct tep_handle *pevent) +void TEP_PLUGIN_UNLOADER(struct tep_handle *tep) { - tep_unregister_print_function(pevent, process_xen_hypercall_name, + tep_unregister_print_function(tep, process_xen_hypercall_name, "xen_hypercall_name"); } diff --git a/tools/memory-model/Documentation/explanation.txt b/tools/memory-model/Documentation/explanation.txt index 35bff92cc773..68caa9a976d0 100644 --- a/tools/memory-model/Documentation/explanation.txt +++ b/tools/memory-model/Documentation/explanation.txt @@ -27,7 +27,7 @@ Explanation of the Linux-Kernel Memory Consistency Model 19. AND THEN THERE WAS ALPHA 20. THE HAPPENS-BEFORE RELATION: hb 21. THE PROPAGATES-BEFORE RELATION: pb - 22. RCU RELATIONS: rcu-link, gp, rscs, rcu-fence, and rb + 22. RCU RELATIONS: rcu-link, rcu-gp, rcu-rscsi, rcu-fence, and rb 23. LOCKING 24. ODDS AND ENDS @@ -1430,8 +1430,8 @@ they execute means that it cannot have cycles. This requirement is the content of the LKMM's "propagation" axiom. -RCU RELATIONS: rcu-link, gp, rscs, rcu-fence, and rb ----------------------------------------------------- +RCU RELATIONS: rcu-link, rcu-gp, rcu-rscsi, rcu-fence, and rb +------------------------------------------------------------- RCU (Read-Copy-Update) is a powerful synchronization mechanism. It rests on two concepts: grace periods and read-side critical sections. @@ -1446,17 +1446,19 @@ As far as memory models are concerned, RCU's main feature is its Grace-Period Guarantee, which states that a critical section can never span a full grace period. In more detail, the Guarantee says: - If a critical section starts before a grace period then it - must end before the grace period does. In addition, every - store that propagates to the critical section's CPU before the - end of the critical section must propagate to every CPU before - the end of the grace period. + For any critical section C and any grace period G, at least + one of the following statements must hold: - If a critical section ends after a grace period ends then it - must start after the grace period does. In addition, every - store that propagates to the grace period's CPU before the - start of the grace period must propagate to every CPU before - the start of the critical section. +(1) C ends before G does, and in addition, every store that + propagates to C's CPU before the end of C must propagate to + every CPU before G ends. + +(2) G starts before C does, and in addition, every store that + propagates to G's CPU before the start of G must propagate + to every CPU before C starts. + +In particular, it is not possible for a critical section to both start +before and end after a grace period. Here is a simple example of RCU in action: @@ -1483,10 +1485,11 @@ The Grace Period Guarantee tells us that when this code runs, it will never end with r1 = 1 and r2 = 0. The reasoning is as follows. r1 = 1 means that P0's store to x propagated to P1 before P1 called synchronize_rcu(), so P0's critical section must have started before -P1's grace period. On the other hand, r2 = 0 means that P0's store to -y, which occurs before the end of the critical section, did not -propagate to P1 before the end of the grace period, violating the -Guarantee. +P1's grace period, contrary to part (2) of the Guarantee. On the +other hand, r2 = 0 means that P0's store to y, which occurs before the +end of the critical section, did not propagate to P1 before the end of +the grace period, contrary to part (1). Together the results violate +the Guarantee. In the kernel's implementations of RCU, the requirements for stores to propagate to every CPU are fulfilled by placing strong fences at @@ -1504,11 +1507,11 @@ before" or "ends after" a grace period? Some aspects of the meaning are pretty obvious, as in the example above, but the details aren't entirely clear. The LKMM formalizes this notion by means of the rcu-link relation. rcu-link encompasses a very general notion of -"before": Among other things, X ->rcu-link Z includes cases where X -happens-before or is equal to some event Y which is equal to or comes -before Z in the coherence order. When Y = Z this says that X ->rfe Z -implies X ->rcu-link Z. In addition, when Y = X it says that X ->fr Z -and X ->co Z each imply X ->rcu-link Z. +"before": If E and F are RCU fence events (i.e., rcu_read_lock(), +rcu_read_unlock(), or synchronize_rcu()) then among other things, +E ->rcu-link F includes cases where E is po-before some memory-access +event X, F is po-after some memory-access event Y, and we have any of +X ->rfe Y, X ->co Y, or X ->fr Y. The formal definition of the rcu-link relation is more than a little obscure, and we won't give it here. It is closely related to the pb @@ -1516,171 +1519,173 @@ relation, and the details don't matter unless you want to comb through a somewhat lengthy formal proof. Pretty much all you need to know about rcu-link is the information in the preceding paragraph. -The LKMM also defines the gp and rscs relations. They bring grace -periods and read-side critical sections into the picture, in the +The LKMM also defines the rcu-gp and rcu-rscsi relations. They bring +grace periods and read-side critical sections into the picture, in the following way: - E ->gp F means there is a synchronize_rcu() fence event S such - that E ->po S and either S ->po F or S = F. In simple terms, - there is a grace period po-between E and F. + E ->rcu-gp F means that E and F are in fact the same event, + and that event is a synchronize_rcu() fence (i.e., a grace + period). - E ->rscs F means there is a critical section delimited by an - rcu_read_lock() fence L and an rcu_read_unlock() fence U, such - that E ->po U and either L ->po F or L = F. You can think of - this as saying that E and F are in the same critical section - (in fact, it also allows E to be po-before the start of the - critical section and F to be po-after the end). + E ->rcu-rscsi F means that E and F are the rcu_read_unlock() + and rcu_read_lock() fence events delimiting some read-side + critical section. (The 'i' at the end of the name emphasizes + that this relation is "inverted": It links the end of the + critical section to the start.) If we think of the rcu-link relation as standing for an extended -"before", then X ->gp Y ->rcu-link Z says that X executes before a -grace period which ends before Z executes. (In fact it covers more -than this, because it also includes cases where X executes before a -grace period and some store propagates to Z's CPU before Z executes -but doesn't propagate to some other CPU until after the grace period -ends.) Similarly, X ->rscs Y ->rcu-link Z says that X is part of (or -before the start of) a critical section which starts before Z -executes. - -The LKMM goes on to define the rcu-fence relation as a sequence of gp -and rscs links separated by rcu-link links, in which the number of gp -links is >= the number of rscs links. For example: +"before", then X ->rcu-gp Y ->rcu-link Z roughly says that X is a +grace period which ends before Z begins. (In fact it covers more than +this, because it also includes cases where some store propagates to +Z's CPU before Z begins but doesn't propagate to some other CPU until +after X ends.) Similarly, X ->rcu-rscsi Y ->rcu-link Z says that X is +the end of a critical section which starts before Z begins. + +The LKMM goes on to define the rcu-fence relation as a sequence of +rcu-gp and rcu-rscsi links separated by rcu-link links, in which the +number of rcu-gp links is >= the number of rcu-rscsi links. For +example: - X ->gp Y ->rcu-link Z ->rscs T ->rcu-link U ->gp V + X ->rcu-gp Y ->rcu-link Z ->rcu-rscsi T ->rcu-link U ->rcu-gp V would imply that X ->rcu-fence V, because this sequence contains two -gp links and only one rscs link. (It also implies that X ->rcu-fence T -and Z ->rcu-fence V.) On the other hand: +rcu-gp links and one rcu-rscsi link. (It also implies that +X ->rcu-fence T and Z ->rcu-fence V.) On the other hand: - X ->rscs Y ->rcu-link Z ->rscs T ->rcu-link U ->gp V + X ->rcu-rscsi Y ->rcu-link Z ->rcu-rscsi T ->rcu-link U ->rcu-gp V does not imply X ->rcu-fence V, because the sequence contains only -one gp link but two rscs links. +one rcu-gp link but two rcu-rscsi links. The rcu-fence relation is important because the Grace Period Guarantee means that rcu-fence acts kind of like a strong fence. In particular, -if W is a write and we have W ->rcu-fence Z, the Guarantee says that W -will propagate to every CPU before Z executes. +E ->rcu-fence F implies not only that E begins before F ends, but also +that any write po-before E will propagate to every CPU before any +instruction po-after F can execute. (However, it does not imply that +E must execute before F; in fact, each synchronize_rcu() fence event +is linked to itself by rcu-fence as a degenerate case.) To prove this in full generality requires some intellectual effort. We'll consider just a very simple case: - W ->gp X ->rcu-link Y ->rscs Z. + G ->rcu-gp W ->rcu-link Z ->rcu-rscsi F. -This formula means that there is a grace period G and a critical -section C such that: +This formula means that G and W are the same event (a grace period), +and there are events X, Y and a read-side critical section C such that: - 1. W is po-before G; + 1. G = W is po-before or equal to X; - 2. X is equal to or po-after G; + 2. X comes "before" Y in some sense (including rfe, co and fr); - 3. X comes "before" Y in some sense; + 2. Y is po-before Z; - 4. Y is po-before the end of C; + 4. Z is the rcu_read_unlock() event marking the end of C; - 5. Z is equal to or po-after the start of C. + 5. F is the rcu_read_lock() event marking the start of C. -From 2 - 4 we deduce that the grace period G ends before the critical -section C. Then the second part of the Grace Period Guarantee says -not only that G starts before C does, but also that W (which executes -on G's CPU before G starts) must propagate to every CPU before C -starts. In particular, W propagates to every CPU before Z executes -(or finishes executing, in the case where Z is equal to the -rcu_read_lock() fence event which starts C.) This sort of reasoning -can be expanded to handle all the situations covered by rcu-fence. +From 1 - 4 we deduce that the grace period G ends before the critical +section C. Then part (2) of the Grace Period Guarantee says not only +that G starts before C does, but also that any write which executes on +G's CPU before G starts must propagate to every CPU before C starts. +In particular, the write propagates to every CPU before F finishes +executing and hence before any instruction po-after F can execute. +This sort of reasoning can be extended to handle all the situations +covered by rcu-fence. Finally, the LKMM defines the RCU-before (rb) relation in terms of rcu-fence. This is done in essentially the same way as the pb relation was defined in terms of strong-fence. We will omit the -details; the end result is that E ->rb F implies E must execute before -F, just as E ->pb F does (and for much the same reasons). +details; the end result is that E ->rb F implies E must execute +before F, just as E ->pb F does (and for much the same reasons). Putting this all together, the LKMM expresses the Grace Period Guarantee by requiring that the rb relation does not contain a cycle. -Equivalently, this "rcu" axiom requires that there are no events E and -F with E ->rcu-link F ->rcu-fence E. Or to put it a third way, the -axiom requires that there are no cycles consisting of gp and rscs -alternating with rcu-link, where the number of gp links is >= the -number of rscs links. +Equivalently, this "rcu" axiom requires that there are no events E +and F with E ->rcu-link F ->rcu-fence E. Or to put it a third way, +the axiom requires that there are no cycles consisting of rcu-gp and +rcu-rscsi alternating with rcu-link, where the number of rcu-gp links +is >= the number of rcu-rscsi links. Justifying the axiom isn't easy, but it is in fact a valid formalization of the Grace Period Guarantee. We won't attempt to go through the detailed argument, but the following analysis gives a -taste of what is involved. Suppose we have a violation of the first -part of the Guarantee: A critical section starts before a grace -period, and some store propagates to the critical section's CPU before -the end of the critical section but doesn't propagate to some other -CPU until after the end of the grace period. +taste of what is involved. Suppose both parts of the Guarantee are +violated: A critical section starts before a grace period, and some +store propagates to the critical section's CPU before the end of the +critical section but doesn't propagate to some other CPU until after +the end of the grace period. Putting symbols to these ideas, let L and U be the rcu_read_lock() and rcu_read_unlock() fence events delimiting the critical section in question, and let S be the synchronize_rcu() fence event for the grace period. Saying that the critical section starts before S means there -are events E and F where E is po-after L (which marks the start of the -critical section), E is "before" F in the sense of the rcu-link -relation, and F is po-before the grace period S: +are events Q and R where Q is po-after L (which marks the start of the +critical section), Q is "before" R in the sense used by the rcu-link +relation, and R is po-before the grace period S. Thus we have: - L ->po E ->rcu-link F ->po S. + L ->rcu-link S. -Let W be the store mentioned above, let Z come before the end of the +Let W be the store mentioned above, let Y come before the end of the critical section and witness that W propagates to the critical -section's CPU by reading from W, and let Y on some arbitrary CPU be a -witness that W has not propagated to that CPU, where Y happens after +section's CPU by reading from W, and let Z on some arbitrary CPU be a +witness that W has not propagated to that CPU, where Z happens after some event X which is po-after S. Symbolically, this amounts to: - S ->po X ->hb* Y ->fr W ->rf Z ->po U. + S ->po X ->hb* Z ->fr W ->rf Y ->po U. -The fr link from Y to W indicates that W has not propagated to Y's CPU -at the time that Y executes. From this, it can be shown (see the -discussion of the rcu-link relation earlier) that X and Z are related -by rcu-link, yielding: +The fr link from Z to W indicates that W has not propagated to Z's CPU +at the time that Z executes. From this, it can be shown (see the +discussion of the rcu-link relation earlier) that S and U are related +by rcu-link: - S ->po X ->rcu-link Z ->po U. + S ->rcu-link U. -The formulas say that S is po-between F and X, hence F ->gp X. They -also say that Z comes before the end of the critical section and E -comes after its start, hence Z ->rscs E. From all this we obtain: +Since S is a grace period we have S ->rcu-gp S, and since L and U are +the start and end of the critical section C we have U ->rcu-rscsi L. +From this we obtain: - F ->gp X ->rcu-link Z ->rscs E ->rcu-link F, + S ->rcu-gp S ->rcu-link U ->rcu-rscsi L ->rcu-link S, a forbidden cycle. Thus the "rcu" axiom rules out this violation of the Grace Period Guarantee. For something a little more down-to-earth, let's see how the axiom works out in practice. Consider the RCU code example from above, this -time with statement labels added to the memory access instructions: +time with statement labels added: int x, y; P0() { - rcu_read_lock(); - W: WRITE_ONCE(x, 1); - X: WRITE_ONCE(y, 1); - rcu_read_unlock(); + L: rcu_read_lock(); + X: WRITE_ONCE(x, 1); + Y: WRITE_ONCE(y, 1); + U: rcu_read_unlock(); } P1() { int r1, r2; - Y: r1 = READ_ONCE(x); - synchronize_rcu(); - Z: r2 = READ_ONCE(y); + Z: r1 = READ_ONCE(x); + S: synchronize_rcu(); + W: r2 = READ_ONCE(y); } -If r2 = 0 at the end then P0's store at X overwrites the value that -P1's load at Z reads from, so we have Z ->fre X and thus Z ->rcu-link X. -In addition, there is a synchronize_rcu() between Y and Z, so therefore -we have Y ->gp Z. +If r2 = 0 at the end then P0's store at Y overwrites the value that +P1's load at W reads from, so we have W ->fre Y. Since S ->po W and +also Y ->po U, we get S ->rcu-link U. In addition, S ->rcu-gp S +because S is a grace period. -If r1 = 1 at the end then P1's load at Y reads from P0's store at W, -so we have W ->rcu-link Y. In addition, W and X are in the same critical -section, so therefore we have X ->rscs W. +If r1 = 1 at the end then P1's load at Z reads from P0's store at X, +so we have X ->rfe Z. Together with L ->po X and Z ->po S, this +yields L ->rcu-link S. And since L and U are the start and end of a +critical section, we have U ->rcu-rscsi L. -Then X ->rscs W ->rcu-link Y ->gp Z ->rcu-link X is a forbidden cycle, -violating the "rcu" axiom. Hence the outcome is not allowed by the -LKMM, as we would expect. +Then U ->rcu-rscsi L ->rcu-link S ->rcu-gp S ->rcu-link U is a +forbidden cycle, violating the "rcu" axiom. Hence the outcome is not +allowed by the LKMM, as we would expect. For contrast, let's see what can happen in a more complicated example: @@ -1690,51 +1695,52 @@ For contrast, let's see what can happen in a more complicated example: { int r0; - rcu_read_lock(); - W: r0 = READ_ONCE(x); - X: WRITE_ONCE(y, 1); - rcu_read_unlock(); + L0: rcu_read_lock(); + r0 = READ_ONCE(x); + WRITE_ONCE(y, 1); + U0: rcu_read_unlock(); } P1() { int r1; - Y: r1 = READ_ONCE(y); - synchronize_rcu(); - Z: WRITE_ONCE(z, 1); + r1 = READ_ONCE(y); + S1: synchronize_rcu(); + WRITE_ONCE(z, 1); } P2() { int r2; - rcu_read_lock(); - U: r2 = READ_ONCE(z); - V: WRITE_ONCE(x, 1); - rcu_read_unlock(); + L2: rcu_read_lock(); + r2 = READ_ONCE(z); + WRITE_ONCE(x, 1); + U2: rcu_read_unlock(); } If r0 = r1 = r2 = 1 at the end, then similar reasoning to before shows -that W ->rscs X ->rcu-link Y ->gp Z ->rcu-link U ->rscs V ->rcu-link W. -However this cycle is not forbidden, because the sequence of relations -contains fewer instances of gp (one) than of rscs (two). Consequently -the outcome is allowed by the LKMM. The following instruction timing -diagram shows how it might actually occur: +that U0 ->rcu-rscsi L0 ->rcu-link S1 ->rcu-gp S1 ->rcu-link U2 ->rcu-rscsi +L2 ->rcu-link U0. However this cycle is not forbidden, because the +sequence of relations contains fewer instances of rcu-gp (one) than of +rcu-rscsi (two). Consequently the outcome is allowed by the LKMM. +The following instruction timing diagram shows how it might actually +occur: P0 P1 P2 -------------------- -------------------- -------------------- rcu_read_lock() -X: WRITE_ONCE(y, 1) - Y: r1 = READ_ONCE(y) +WRITE_ONCE(y, 1) + r1 = READ_ONCE(y) synchronize_rcu() starts . rcu_read_lock() - . V: WRITE_ONCE(x, 1) -W: r0 = READ_ONCE(x) . + . WRITE_ONCE(x, 1) +r0 = READ_ONCE(x) . rcu_read_unlock() . synchronize_rcu() ends - Z: WRITE_ONCE(z, 1) - U: r2 = READ_ONCE(z) + WRITE_ONCE(z, 1) + r2 = READ_ONCE(z) rcu_read_unlock() This requires P0 and P2 to execute their loads and stores out of @@ -1744,6 +1750,15 @@ section in P0 both starts before P1's grace period does and ends before it does, and the critical section in P2 both starts after P1's grace period does and ends after it does. +Addendum: The LKMM now supports SRCU (Sleepable Read-Copy-Update) in +addition to normal RCU. The ideas involved are much the same as +above, with new relations srcu-gp and srcu-rscsi added to represent +SRCU grace periods and read-side critical sections. There is a +restriction on the srcu-gp and srcu-rscsi links that can appear in an +rcu-fence sequence (the srcu-rscsi links must be paired with srcu-gp +links having the same SRCU domain with proper nesting); the details +are relatively unimportant. + LOCKING ------- diff --git a/tools/memory-model/README b/tools/memory-model/README index 0f2c366518c6..2b87f3971548 100644 --- a/tools/memory-model/README +++ b/tools/memory-model/README @@ -20,13 +20,17 @@ that litmus test to be exercised within the Linux kernel. REQUIREMENTS ============ -Version 7.49 of the "herd7" and "klitmus7" tools must be downloaded -separately: +Version 7.52 or higher of the "herd7" and "klitmus7" tools must be +downloaded separately: https://github.com/herd/herdtools7 See "herdtools7/INSTALL.md" for installation instructions. +Note that although these tools usually provide backwards compatibility, +this is not absolutely guaranteed. Therefore, if a later version does +not work, please try using the exact version called out above. + ================== BASIC USAGE: HERD7 @@ -221,8 +225,29 @@ The Linux-kernel memory model has the following limitations: additional call_rcu() process to the site of the emulated rcu-barrier(). - e. Sleepable RCU (SRCU) is not modeled. It can be - emulated, but perhaps not simply. + e. Although sleepable RCU (SRCU) is now modeled, there + are some subtle differences between its semantics and + those in the Linux kernel. For example, the kernel + might interpret the following sequence as two partially + overlapping SRCU read-side critical sections: + + 1 r1 = srcu_read_lock(&my_srcu); + 2 do_something_1(); + 3 r2 = srcu_read_lock(&my_srcu); + 4 do_something_2(); + 5 srcu_read_unlock(&my_srcu, r1); + 6 do_something_3(); + 7 srcu_read_unlock(&my_srcu, r2); + + In contrast, LKMM will interpret this as a nested pair of + SRCU read-side critical sections, with the outer critical + section spanning lines 1-7 and the inner critical section + spanning lines 3-5. + + This difference would be more of a concern had anyone + identified a reasonable use case for partially overlapping + SRCU read-side critical sections. For more information, + please see: https://paulmck.livejournal.com/40593.html f. Reader-writer locking is not modeled. It can be emulated in litmus tests using atomic read-modify-write diff --git a/tools/memory-model/linux-kernel.bell b/tools/memory-model/linux-kernel.bell index 796513362c05..def9131d3d8e 100644 --- a/tools/memory-model/linux-kernel.bell +++ b/tools/memory-model/linux-kernel.bell @@ -33,8 +33,14 @@ enum Barriers = 'wmb (*smp_wmb*) || 'after-unlock-lock (*smp_mb__after_unlock_lock*) instructions F[Barriers] +(* SRCU *) +enum SRCU = 'srcu-lock || 'srcu-unlock || 'sync-srcu +instructions SRCU[SRCU] +(* All srcu events *) +let Srcu = Srcu-lock | Srcu-unlock | Sync-srcu + (* Compute matching pairs of nested Rcu-lock and Rcu-unlock *) -let matched = let rec +let rcu-rscs = let rec unmatched-locks = Rcu-lock \ domain(matched) and unmatched-unlocks = Rcu-unlock \ range(matched) and unmatched = unmatched-locks | unmatched-unlocks @@ -46,8 +52,27 @@ let matched = let rec in matched (* Validate nesting *) -flag ~empty Rcu-lock \ domain(matched) as unbalanced-rcu-locking -flag ~empty Rcu-unlock \ range(matched) as unbalanced-rcu-locking +flag ~empty Rcu-lock \ domain(rcu-rscs) as unbalanced-rcu-locking +flag ~empty Rcu-unlock \ range(rcu-rscs) as unbalanced-rcu-locking + +(* Compute matching pairs of nested Srcu-lock and Srcu-unlock *) +let srcu-rscs = let rec + unmatched-locks = Srcu-lock \ domain(matched) + and unmatched-unlocks = Srcu-unlock \ range(matched) + and unmatched = unmatched-locks | unmatched-unlocks + and unmatched-po = ([unmatched] ; po ; [unmatched]) & loc + and unmatched-locks-to-unlocks = + ([unmatched-locks] ; po ; [unmatched-unlocks]) & loc + and matched = matched | (unmatched-locks-to-unlocks \ + (unmatched-po ; unmatched-po)) + in matched + +(* Validate nesting *) +flag ~empty Srcu-lock \ domain(srcu-rscs) as unbalanced-srcu-locking +flag ~empty Srcu-unlock \ range(srcu-rscs) as unbalanced-srcu-locking + +(* Check for use of synchronize_srcu() inside an RCU critical section *) +flag ~empty rcu-rscs & (po ; [Sync-srcu] ; po) as invalid-sleep -(* Outermost level of nesting only *) -let crit = matched \ (po^-1 ; matched ; po^-1) +(* Validate SRCU dynamic match *) +flag ~empty different-values(srcu-rscs) as srcu-bad-nesting diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat index 8f23c74a96fd..8dcb37835b61 100644 --- a/tools/memory-model/linux-kernel.cat +++ b/tools/memory-model/linux-kernel.cat @@ -33,7 +33,7 @@ let mb = ([M] ; fencerel(Mb) ; [M]) | ([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M]) | ([M] ; po ; [UL] ; (co | po) ; [LKW] ; fencerel(After-unlock-lock) ; [M]) -let gp = po ; [Sync-rcu] ; po? +let gp = po ; [Sync-rcu | Sync-srcu] ; po? let strong-fence = mb | gp @@ -91,32 +91,47 @@ acyclic pb as propagation (*******) (* - * Effect of read-side critical section proceeds from the rcu_read_lock() - * onward on the one hand and from the rcu_read_unlock() backwards on the - * other hand. + * Effects of read-side critical sections proceed from the rcu_read_unlock() + * or srcu_read_unlock() backwards on the one hand, and from the + * rcu_read_lock() or srcu_read_lock() forwards on the other hand. + * + * In the definition of rcu-fence below, the po term at the left-hand side + * of each disjunct and the po? term at the right-hand end have been factored + * out. They have been moved into the definitions of rcu-link and rb. + * This was necessary in order to apply the "& loc" tests correctly. *) -let rscs = po ; crit^-1 ; po? +let rcu-gp = [Sync-rcu] (* Compare with gp *) +let srcu-gp = [Sync-srcu] +let rcu-rscsi = rcu-rscs^-1 +let srcu-rscsi = srcu-rscs^-1 (* * The synchronize_rcu() strong fence is special in that it can order not * one but two non-rf relations, but only in conjunction with an RCU * read-side critical section. *) -let rcu-link = hb* ; pb* ; prop +let rcu-link = po? ; hb* ; pb* ; prop ; po (* * Any sequence containing at least as many grace periods as RCU read-side * critical sections (joined by rcu-link) acts as a generalized strong fence. + * Likewise for SRCU grace periods and read-side critical sections, provided + * the synchronize_srcu() and srcu_read_[un]lock() calls refer to the same + * struct srcu_struct location. *) -let rec rcu-fence = gp | - (gp ; rcu-link ; rscs) | - (rscs ; rcu-link ; gp) | - (gp ; rcu-link ; rcu-fence ; rcu-link ; rscs) | - (rscs ; rcu-link ; rcu-fence ; rcu-link ; gp) | +let rec rcu-fence = rcu-gp | srcu-gp | + (rcu-gp ; rcu-link ; rcu-rscsi) | + ((srcu-gp ; rcu-link ; srcu-rscsi) & loc) | + (rcu-rscsi ; rcu-link ; rcu-gp) | + ((srcu-rscsi ; rcu-link ; srcu-gp) & loc) | + (rcu-gp ; rcu-link ; rcu-fence ; rcu-link ; rcu-rscsi) | + ((srcu-gp ; rcu-link ; rcu-fence ; rcu-link ; srcu-rscsi) & loc) | + (rcu-rscsi ; rcu-link ; rcu-fence ; rcu-link ; rcu-gp) | + ((srcu-rscsi ; rcu-link ; rcu-fence ; rcu-link ; srcu-gp) & loc) | (rcu-fence ; rcu-link ; rcu-fence) (* rb orders instructions just as pb does *) -let rb = prop ; rcu-fence ; hb* ; pb* +let rb = prop ; po ; rcu-fence ; po? ; hb* ; pb* irreflexive rb as rcu diff --git a/tools/memory-model/linux-kernel.def b/tools/memory-model/linux-kernel.def index b27911cc087d..551eeaa389d4 100644 --- a/tools/memory-model/linux-kernel.def +++ b/tools/memory-model/linux-kernel.def @@ -47,6 +47,12 @@ rcu_read_unlock() { __fence{rcu-unlock}; } synchronize_rcu() { __fence{sync-rcu}; } synchronize_rcu_expedited() { __fence{sync-rcu}; } +// SRCU +srcu_read_lock(X) __srcu{srcu-lock}(X) +srcu_read_unlock(X,Y) { __srcu{srcu-unlock}(X,Y); } +synchronize_srcu(X) { __srcu{sync-srcu}(X); } +synchronize_srcu_expedited(X) { __srcu{sync-srcu}(X); } + // Atomic atomic_read(X) READ_ONCE(*X) atomic_set(X,V) { WRITE_ONCE(*X,V); } diff --git a/tools/memory-model/lock.cat b/tools/memory-model/lock.cat index 305ded17e741..a059d1a6d8a2 100644 --- a/tools/memory-model/lock.cat +++ b/tools/memory-model/lock.cat @@ -6,9 +6,6 @@ (* * Generate coherence orders and handle lock operations - * - * Warning: spin_is_locked() crashes herd7 versions strictly before 7.48. - * spin_is_locked() is functional from herd7 version 7.49. *) include "cross.cat" diff --git a/tools/objtool/Documentation/stack-validation.txt b/tools/objtool/Documentation/stack-validation.txt index 3995735a878f..4dd11a554b9b 100644 --- a/tools/objtool/Documentation/stack-validation.txt +++ b/tools/objtool/Documentation/stack-validation.txt @@ -111,7 +111,7 @@ c) Higher live patching compatibility rate be detectable). Objtool makes that possible. For more details, see the livepatch documentation in the Linux kernel - source tree at Documentation/livepatch/livepatch.txt. + source tree at Documentation/livepatch/livepatch.rst. Rules ----- @@ -306,7 +306,7 @@ ignore it: - To skip validation of a file, add - OBJECT_FILES_NON_STANDARD_filename.o := n + OBJECT_FILES_NON_STANDARD_filename.o := y to the Makefile. diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile index 53f8be0f4a1f..88158239622b 100644 --- a/tools/objtool/Makefile +++ b/tools/objtool/Makefile @@ -7,11 +7,12 @@ ARCH := x86 endif # always use the host compiler +HOSTAR ?= ar HOSTCC ?= gcc HOSTLD ?= ld +AR = $(HOSTAR) CC = $(HOSTCC) LD = $(HOSTLD) -AR = ar ifeq ($(srctree),) srctree := $(patsubst %/,%,$(dir $(CURDIR))) diff --git a/tools/objtool/arch.h b/tools/objtool/arch.h index b0d7dc3d71b5..580e344db3dd 100644 --- a/tools/objtool/arch.h +++ b/tools/objtool/arch.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _ARCH_H @@ -33,7 +21,11 @@ #define INSN_STACK 8 #define INSN_BUG 9 #define INSN_NOP 10 -#define INSN_OTHER 11 +#define INSN_STAC 11 +#define INSN_CLAC 12 +#define INSN_STD 13 +#define INSN_CLD 14 +#define INSN_OTHER 15 #define INSN_LAST INSN_OTHER enum op_dest_type { @@ -41,6 +33,7 @@ enum op_dest_type { OP_DEST_REG_INDIRECT, OP_DEST_MEM, OP_DEST_PUSH, + OP_DEST_PUSHF, OP_DEST_LEAVE, }; @@ -55,6 +48,7 @@ enum op_src_type { OP_SRC_REG_INDIRECT, OP_SRC_CONST, OP_SRC_POP, + OP_SRC_POPF, OP_SRC_ADD, OP_SRC_AND, }; diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c index 540a209b78ab..584568f27a83 100644 --- a/tools/objtool/arch/x86/decode.c +++ b/tools/objtool/arch/x86/decode.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #include <stdio.h> @@ -357,19 +345,26 @@ int arch_decode_instruction(struct elf *elf, struct section *sec, /* pushf */ *type = INSN_STACK; op->src.type = OP_SRC_CONST; - op->dest.type = OP_DEST_PUSH; + op->dest.type = OP_DEST_PUSHF; break; case 0x9d: /* popf */ *type = INSN_STACK; - op->src.type = OP_SRC_POP; + op->src.type = OP_SRC_POPF; op->dest.type = OP_DEST_MEM; break; case 0x0f: - if (op2 >= 0x80 && op2 <= 0x8f) { + if (op2 == 0x01) { + + if (modrm == 0xca) + *type = INSN_CLAC; + else if (modrm == 0xcb) + *type = INSN_STAC; + + } else if (op2 >= 0x80 && op2 <= 0x8f) { *type = INSN_JUMP_CONDITIONAL; @@ -444,6 +439,14 @@ int arch_decode_instruction(struct elf *elf, struct section *sec, *type = INSN_CALL; break; + case 0xfc: + *type = INSN_CLD; + break; + + case 0xfd: + *type = INSN_STD; + break; + case 0xff: if (modrm_reg == 2 || modrm_reg == 3) diff --git a/tools/objtool/arch/x86/include/asm/orc_types.h b/tools/objtool/arch/x86/include/asm/orc_types.h index 46f516dd80ce..6e060907c163 100644 --- a/tools/objtool/arch/x86/include/asm/orc_types.h +++ b/tools/objtool/arch/x86/include/asm/orc_types.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _ORC_TYPES_H diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c index 694abc628e9b..c807984a03c1 100644 --- a/tools/objtool/builtin-check.c +++ b/tools/objtool/builtin-check.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ /* @@ -29,7 +17,7 @@ #include "builtin.h" #include "check.h" -bool no_fp, no_unreachable, retpoline, module; +bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess; static const char * const check_usage[] = { "objtool check [<options>] file.o", @@ -41,6 +29,8 @@ const struct option check_options[] = { OPT_BOOLEAN('u', "no-unreachable", &no_unreachable, "Skip 'unreachable instruction' warnings"), OPT_BOOLEAN('r', "retpoline", &retpoline, "Validate retpoline assumptions"), OPT_BOOLEAN('m', "module", &module, "Indicates the object will be part of a kernel module"), + OPT_BOOLEAN('b', "backtrace", &backtrace, "unwind on error"), + OPT_BOOLEAN('a', "uaccess", &uaccess, "enable uaccess checking"), OPT_END(), }; diff --git a/tools/objtool/builtin-orc.c b/tools/objtool/builtin-orc.c index 77ea2b97117d..5f7cc6157edd 100644 --- a/tools/objtool/builtin-orc.c +++ b/tools/objtool/builtin-orc.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ /* diff --git a/tools/objtool/builtin.h b/tools/objtool/builtin.h index 28ff40e19a14..a32736f8d2a4 100644 --- a/tools/objtool/builtin.h +++ b/tools/objtool/builtin.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _BUILTIN_H #define _BUILTIN_H @@ -20,7 +8,7 @@ #include <subcmd/parse-options.h> extern const struct option check_options[]; -extern bool no_fp, no_unreachable, retpoline, module; +extern bool no_fp, no_unreachable, retpoline, module, backtrace, uaccess; extern int cmd_check(int argc, const char **argv); extern int cmd_orc(int argc, const char **argv); diff --git a/tools/objtool/cfi.h b/tools/objtool/cfi.h index 2fe883c665c7..4427bf8ed686 100644 --- a/tools/objtool/cfi.h +++ b/tools/objtool/cfi.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015-2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _OBJTOOL_CFI_H diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 5dde107083c6..172f99195726 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #include <string.h> @@ -28,9 +16,12 @@ #include <linux/hashtable.h> #include <linux/kernel.h> +#define FAKE_JUMP_OFFSET -1 + struct alternative { struct list_head list; struct instruction *insn; + bool skip_orig; }; const char *objname; @@ -105,29 +96,6 @@ static struct instruction *next_insn_same_func(struct objtool_file *file, insn = next_insn_same_sec(file, insn)) /* - * Check if the function has been manually whitelisted with the - * STACK_FRAME_NON_STANDARD macro, or if it should be automatically whitelisted - * due to its use of a context switching instruction. - */ -static bool ignore_func(struct objtool_file *file, struct symbol *func) -{ - struct rela *rela; - - /* check for STACK_FRAME_NON_STANDARD */ - if (file->whitelist && file->whitelist->rela) - list_for_each_entry(rela, &file->whitelist->rela->rela_list, list) { - if (rela->sym->type == STT_SECTION && - rela->sym->sec == func->sec && - rela->addend == func->offset) - return true; - if (rela->sym->type == STT_FUNC && rela->sym == func) - return true; - } - - return false; -} - -/* * This checks to see if the given function is a "noreturn" function. * * For global functions which are outside the scope of this object file, we @@ -165,6 +133,7 @@ static int __dead_end_function(struct objtool_file *file, struct symbol *func, "fortify_panic", "usercopy_abort", "machine_real_restart", + "rewind_stack_do_exit", }; if (func->bind == STB_WEAK) @@ -436,18 +405,107 @@ static void add_ignores(struct objtool_file *file) struct instruction *insn; struct section *sec; struct symbol *func; + struct rela *rela; - for_each_sec(file, sec) { - list_for_each_entry(func, &sec->symbol_list, list) { - if (func->type != STT_FUNC) - continue; + sec = find_section_by_name(file->elf, ".rela.discard.func_stack_frame_non_standard"); + if (!sec) + return; + + list_for_each_entry(rela, &sec->rela_list, list) { + switch (rela->sym->type) { + case STT_FUNC: + func = rela->sym; + break; - if (!ignore_func(file, func)) + case STT_SECTION: + func = find_symbol_by_offset(rela->sym->sec, rela->addend); + if (!func || func->type != STT_FUNC) continue; + break; - func_for_each_insn_all(file, func, insn) - insn->ignore = true; + default: + WARN("unexpected relocation symbol type in %s: %d", sec->name, rela->sym->type); + continue; } + + func_for_each_insn_all(file, func, insn) + insn->ignore = true; + } +} + +/* + * This is a whitelist of functions that is allowed to be called with AC set. + * The list is meant to be minimal and only contains compiler instrumentation + * ABI and a few functions used to implement *_{to,from}_user() functions. + * + * These functions must not directly change AC, but may PUSHF/POPF. + */ +static const char *uaccess_safe_builtin[] = { + /* KASAN */ + "kasan_report", + "check_memory_region", + /* KASAN out-of-line */ + "__asan_loadN_noabort", + "__asan_load1_noabort", + "__asan_load2_noabort", + "__asan_load4_noabort", + "__asan_load8_noabort", + "__asan_load16_noabort", + "__asan_storeN_noabort", + "__asan_store1_noabort", + "__asan_store2_noabort", + "__asan_store4_noabort", + "__asan_store8_noabort", + "__asan_store16_noabort", + /* KASAN in-line */ + "__asan_report_load_n_noabort", + "__asan_report_load1_noabort", + "__asan_report_load2_noabort", + "__asan_report_load4_noabort", + "__asan_report_load8_noabort", + "__asan_report_load16_noabort", + "__asan_report_store_n_noabort", + "__asan_report_store1_noabort", + "__asan_report_store2_noabort", + "__asan_report_store4_noabort", + "__asan_report_store8_noabort", + "__asan_report_store16_noabort", + /* KCOV */ + "write_comp_data", + "__sanitizer_cov_trace_pc", + "__sanitizer_cov_trace_const_cmp1", + "__sanitizer_cov_trace_const_cmp2", + "__sanitizer_cov_trace_const_cmp4", + "__sanitizer_cov_trace_const_cmp8", + "__sanitizer_cov_trace_cmp1", + "__sanitizer_cov_trace_cmp2", + "__sanitizer_cov_trace_cmp4", + "__sanitizer_cov_trace_cmp8", + /* UBSAN */ + "ubsan_type_mismatch_common", + "__ubsan_handle_type_mismatch", + "__ubsan_handle_type_mismatch_v1", + /* misc */ + "csum_partial_copy_generic", + "__memcpy_mcsafe", + "ftrace_likely_update", /* CONFIG_TRACE_BRANCH_PROFILING */ + NULL +}; + +static void add_uaccess_safe(struct objtool_file *file) +{ + struct symbol *func; + const char **name; + + if (!uaccess) + return; + + for (name = uaccess_safe_builtin; *name; name++) { + func = find_symbol_by_name(file->elf, *name); + if (!func) + continue; + + func->alias->uaccess_safe = true; } } @@ -457,13 +515,13 @@ static void add_ignores(struct objtool_file *file) * But it at least allows objtool to understand the control flow *around* the * retpoline. */ -static int add_nospec_ignores(struct objtool_file *file) +static int add_ignore_alternatives(struct objtool_file *file) { struct section *sec; struct rela *rela; struct instruction *insn; - sec = find_section_by_name(file->elf, ".rela.discard.nospec"); + sec = find_section_by_name(file->elf, ".rela.discard.ignore_alts"); if (!sec) return 0; @@ -475,7 +533,7 @@ static int add_nospec_ignores(struct objtool_file *file) insn = find_insn(file, rela->sym->sec, rela->addend); if (!insn) { - WARN("bad .discard.nospec entry"); + WARN("bad .discard.ignore_alts entry"); return -1; } @@ -500,7 +558,7 @@ static int add_jump_destinations(struct objtool_file *file) insn->type != INSN_JUMP_UNCONDITIONAL) continue; - if (insn->ignore) + if (insn->ignore || insn->offset == FAKE_JUMP_OFFSET) continue; rela = find_rela_by_dest_range(insn->sec, insn->offset, @@ -524,7 +582,8 @@ static int add_jump_destinations(struct objtool_file *file) continue; } else { /* sibling call */ - insn->jump_dest = 0; + insn->call_dest = rela->sym; + insn->jump_dest = NULL; continue; } @@ -546,25 +605,38 @@ static int add_jump_destinations(struct objtool_file *file) } /* - * For GCC 8+, create parent/child links for any cold - * subfunctions. This is _mostly_ redundant with a similar - * initialization in read_symbols(). - * - * If a function has aliases, we want the *first* such function - * in the symbol table to be the subfunction's parent. In that - * case we overwrite the initialization done in read_symbols(). - * - * However this code can't completely replace the - * read_symbols() code because this doesn't detect the case - * where the parent function's only reference to a subfunction - * is through a switch table. + * Cross-function jump. */ if (insn->func && insn->jump_dest->func && - insn->func != insn->jump_dest->func && - !strstr(insn->func->name, ".cold.") && - strstr(insn->jump_dest->func->name, ".cold.")) { - insn->func->cfunc = insn->jump_dest->func; - insn->jump_dest->func->pfunc = insn->func; + insn->func != insn->jump_dest->func) { + + /* + * For GCC 8+, create parent/child links for any cold + * subfunctions. This is _mostly_ redundant with a + * similar initialization in read_symbols(). + * + * If a function has aliases, we want the *first* such + * function in the symbol table to be the subfunction's + * parent. In that case we overwrite the + * initialization done in read_symbols(). + * + * However this code can't completely replace the + * read_symbols() code because this doesn't detect the + * case where the parent function's only reference to a + * subfunction is through a switch table. + */ + if (!strstr(insn->func->name, ".cold.") && + strstr(insn->jump_dest->func->name, ".cold.")) { + insn->func->cfunc = insn->jump_dest->func; + insn->jump_dest->func->pfunc = insn->func; + + } else if (insn->jump_dest->func->pfunc != insn->func->pfunc && + insn->jump_dest->offset == insn->jump_dest->func->offset) { + + /* sibling class */ + insn->call_dest = insn->jump_dest->func; + insn->jump_dest = NULL; + } } } @@ -633,9 +705,6 @@ static int add_call_destinations(struct objtool_file *file) * conditionally jumps to the _end_ of the entry. We have to modify these * jumps' destinations to point back to .text rather than the end of the * entry in .altinstr_replacement. - * - * 4. It has been requested that we don't validate the !POPCNT feature path - * which is a "very very small percentage of machines". */ static int handle_group_alt(struct objtool_file *file, struct special_alt *special_alt, @@ -651,9 +720,6 @@ static int handle_group_alt(struct objtool_file *file, if (insn->offset >= special_alt->orig_off + special_alt->orig_len) break; - if (special_alt->skip_orig) - insn->type = INSN_NOP; - insn->alt_group = true; last_orig_insn = insn; } @@ -669,10 +735,10 @@ static int handle_group_alt(struct objtool_file *file, clear_insn_state(&fake_jump->state); fake_jump->sec = special_alt->new_sec; - fake_jump->offset = -1; + fake_jump->offset = FAKE_JUMP_OFFSET; fake_jump->type = INSN_JUMP_UNCONDITIONAL; fake_jump->jump_dest = list_next_entry(last_orig_insn, list); - fake_jump->ignore = true; + fake_jump->func = orig_insn->func; } if (!special_alt->new_len) { @@ -695,6 +761,7 @@ static int handle_group_alt(struct objtool_file *file, last_new_insn = insn; insn->ignore = orig_insn->ignore_alts; + insn->func = orig_insn->func; if (insn->type != INSN_JUMP_CONDITIONAL && insn->type != INSN_JUMP_UNCONDITIONAL) @@ -817,6 +884,8 @@ static int add_special_section_alts(struct objtool_file *file) } alt->insn = new_insn; + alt->skip_orig = special_alt->skip_orig; + orig_insn->ignore_alts |= special_alt->skip_alt; list_add_tail(&alt->list, &orig_insn->alts); list_del(&special_alt->list); @@ -1238,8 +1307,9 @@ static int decode_sections(struct objtool_file *file) return ret; add_ignores(file); + add_uaccess_safe(file); - ret = add_nospec_ignores(file); + ret = add_ignore_alternatives(file); if (ret) return ret; @@ -1319,11 +1389,11 @@ static int update_insn_state_regs(struct instruction *insn, struct insn_state *s return 0; /* push */ - if (op->dest.type == OP_DEST_PUSH) + if (op->dest.type == OP_DEST_PUSH || op->dest.type == OP_DEST_PUSHF) cfa->offset += 8; /* pop */ - if (op->src.type == OP_SRC_POP) + if (op->src.type == OP_SRC_POP || op->src.type == OP_SRC_POPF) cfa->offset -= 8; /* add immediate to sp */ @@ -1580,6 +1650,7 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state) break; case OP_SRC_POP: + case OP_SRC_POPF: if (!state->drap && op->dest.type == OP_DEST_REG && op->dest.reg == cfa->base) { @@ -1644,6 +1715,7 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state) break; case OP_DEST_PUSH: + case OP_DEST_PUSHF: state->stack_size += 8; if (cfa->base == CFI_SP) cfa->offset += 8; @@ -1734,7 +1806,7 @@ static int update_insn_state(struct instruction *insn, struct insn_state *state) break; case OP_DEST_MEM: - if (op->src.type != OP_SRC_POP) { + if (op->src.type != OP_SRC_POP && op->src.type != OP_SRC_POPF) { WARN_FUNC("unknown stack-related memory operation", insn->sec, insn->offset); return -1; @@ -1798,6 +1870,50 @@ static bool insn_state_match(struct instruction *insn, struct insn_state *state) return false; } +static inline bool func_uaccess_safe(struct symbol *func) +{ + if (func) + return func->alias->uaccess_safe; + + return false; +} + +static inline const char *insn_dest_name(struct instruction *insn) +{ + if (insn->call_dest) + return insn->call_dest->name; + + return "{dynamic}"; +} + +static int validate_call(struct instruction *insn, struct insn_state *state) +{ + if (state->uaccess && !func_uaccess_safe(insn->call_dest)) { + WARN_FUNC("call to %s() with UACCESS enabled", + insn->sec, insn->offset, insn_dest_name(insn)); + return 1; + } + + if (state->df) { + WARN_FUNC("call to %s() with DF set", + insn->sec, insn->offset, insn_dest_name(insn)); + return 1; + } + + return 0; +} + +static int validate_sibling_call(struct instruction *insn, struct insn_state *state) +{ + if (has_modified_stack_frame(state)) { + WARN_FUNC("sibling call from callable instruction with modified stack frame", + insn->sec, insn->offset); + return 1; + } + + return validate_call(insn, state); +} + /* * Follow the branch starting at the given instruction, and recursively follow * any other branches (jumps). Meanwhile, track the frame pointer state at @@ -1831,7 +1947,8 @@ static int validate_branch(struct objtool_file *file, struct instruction *first, return 1; } - func = insn->func ? insn->func->pfunc : NULL; + if (insn->func) + func = insn->func->pfunc; if (func && insn->ignore) { WARN_FUNC("BUG: why am I validating an ignored function?", @@ -1843,7 +1960,9 @@ static int validate_branch(struct objtool_file *file, struct instruction *first, if (!insn->hint && !insn_state_match(insn, &state)) return 1; - return 0; + /* If we were here with AC=0, but now have AC=1, go again */ + if (insn->state.uaccess || !state.uaccess) + return 0; } if (insn->hint) { @@ -1892,16 +2011,42 @@ static int validate_branch(struct objtool_file *file, struct instruction *first, insn->visited = true; if (!insn->ignore_alts) { + bool skip_orig = false; + list_for_each_entry(alt, &insn->alts, list) { + if (alt->skip_orig) + skip_orig = true; + ret = validate_branch(file, alt->insn, state); - if (ret) - return 1; + if (ret) { + if (backtrace) + BT_FUNC("(alt)", insn); + return ret; + } } + + if (skip_orig) + return 0; } switch (insn->type) { case INSN_RETURN: + if (state.uaccess && !func_uaccess_safe(func)) { + WARN_FUNC("return with UACCESS enabled", sec, insn->offset); + return 1; + } + + if (!state.uaccess && func_uaccess_safe(func)) { + WARN_FUNC("return with UACCESS disabled from a UACCESS-safe function", sec, insn->offset); + return 1; + } + + if (state.df) { + WARN_FUNC("return with DF set", sec, insn->offset); + return 1; + } + if (func && has_modified_stack_frame(&state)) { WARN_FUNC("return with modified stack frame", sec, insn->offset); @@ -1917,17 +2062,22 @@ static int validate_branch(struct objtool_file *file, struct instruction *first, return 0; case INSN_CALL: - if (is_fentry_call(insn)) - break; + case INSN_CALL_DYNAMIC: + ret = validate_call(insn, &state); + if (ret) + return ret; - ret = dead_end_function(file, insn->call_dest); - if (ret == 1) - return 0; - if (ret == -1) - return 1; + if (insn->type == INSN_CALL) { + if (is_fentry_call(insn)) + break; + + ret = dead_end_function(file, insn->call_dest); + if (ret == 1) + return 0; + if (ret == -1) + return 1; + } - /* fallthrough */ - case INSN_CALL_DYNAMIC: if (!no_fp && func && !has_valid_stack_frame(&state)) { WARN_FUNC("call without frame pointer save/setup", sec, insn->offset); @@ -1937,18 +2087,21 @@ static int validate_branch(struct objtool_file *file, struct instruction *first, case INSN_JUMP_CONDITIONAL: case INSN_JUMP_UNCONDITIONAL: - if (insn->jump_dest && - (!func || !insn->jump_dest->func || - insn->jump_dest->func->pfunc == func)) { - ret = validate_branch(file, insn->jump_dest, - state); + if (func && !insn->jump_dest) { + ret = validate_sibling_call(insn, &state); if (ret) - return 1; + return ret; - } else if (func && has_modified_stack_frame(&state)) { - WARN_FUNC("sibling call from callable instruction with modified stack frame", - sec, insn->offset); - return 1; + } else if (insn->jump_dest && + (!func || !insn->jump_dest->func || + insn->jump_dest->func->pfunc == func)) { + ret = validate_branch(file, insn->jump_dest, + state); + if (ret) { + if (backtrace) + BT_FUNC("(branch)", insn); + return ret; + } } if (insn->type == INSN_JUMP_UNCONDITIONAL) @@ -1957,11 +2110,10 @@ static int validate_branch(struct objtool_file *file, struct instruction *first, break; case INSN_JUMP_DYNAMIC: - if (func && list_empty(&insn->alts) && - has_modified_stack_frame(&state)) { - WARN_FUNC("sibling call from callable instruction with modified stack frame", - sec, insn->offset); - return 1; + if (func && list_empty(&insn->alts)) { + ret = validate_sibling_call(insn, &state); + if (ret) + return ret; } return 0; @@ -1978,6 +2130,63 @@ static int validate_branch(struct objtool_file *file, struct instruction *first, if (update_insn_state(insn, &state)) return 1; + if (insn->stack_op.dest.type == OP_DEST_PUSHF) { + if (!state.uaccess_stack) { + state.uaccess_stack = 1; + } else if (state.uaccess_stack >> 31) { + WARN_FUNC("PUSHF stack exhausted", sec, insn->offset); + return 1; + } + state.uaccess_stack <<= 1; + state.uaccess_stack |= state.uaccess; + } + + if (insn->stack_op.src.type == OP_SRC_POPF) { + if (state.uaccess_stack) { + state.uaccess = state.uaccess_stack & 1; + state.uaccess_stack >>= 1; + if (state.uaccess_stack == 1) + state.uaccess_stack = 0; + } + } + + break; + + case INSN_STAC: + if (state.uaccess) { + WARN_FUNC("recursive UACCESS enable", sec, insn->offset); + return 1; + } + + state.uaccess = true; + break; + + case INSN_CLAC: + if (!state.uaccess && insn->func) { + WARN_FUNC("redundant UACCESS disable", sec, insn->offset); + return 1; + } + + if (func_uaccess_safe(func) && !state.uaccess_stack) { + WARN_FUNC("UACCESS-safe disables UACCESS", sec, insn->offset); + return 1; + } + + state.uaccess = false; + break; + + case INSN_STD: + if (state.df) + WARN_FUNC("recursive STD", sec, insn->offset); + + state.df = true; + break; + + case INSN_CLD: + if (!state.df && insn->func) + WARN_FUNC("redundant CLD", sec, insn->offset); + + state.df = false; break; default: @@ -2014,6 +2223,8 @@ static int validate_unwind_hints(struct objtool_file *file) for_each_insn(file, insn) { if (insn->hint && !insn->visited) { ret = validate_branch(file, insn, state); + if (ret && backtrace) + BT_FUNC("<=== (hint)", insn); warnings += ret; } } @@ -2141,7 +2352,11 @@ static int validate_functions(struct objtool_file *file) if (!insn || insn->ignore) continue; + state.uaccess = func->alias->uaccess_safe; + ret = validate_branch(file, insn, state); + if (ret && backtrace) + BT_FUNC("<=== (func)", insn); warnings += ret; } } @@ -2198,7 +2413,6 @@ int check(const char *_objname, bool orc) INIT_LIST_HEAD(&file.insn_list); hash_init(file.insn_hash); - file.whitelist = find_section_by_name(file.elf, ".discard.func_stack_frame_non_standard"); file.c_file = find_section_by_name(file.elf, ".comment"); file.ignore_unreachables = no_unreachable; file.hints = false; diff --git a/tools/objtool/check.h b/tools/objtool/check.h index e6e8a655b556..cb60b9acf5cf 100644 --- a/tools/objtool/check.h +++ b/tools/objtool/check.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _CHECK_H @@ -31,7 +19,8 @@ struct insn_state { int stack_size; unsigned char type; bool bp_scratch; - bool drap, end; + bool drap, end, uaccess, df; + unsigned int uaccess_stack; int drap_reg, drap_offset; struct cfi_reg vals[CFI_NUM_REGS]; }; @@ -60,7 +49,6 @@ struct objtool_file { struct elf *elf; struct list_head insn_list; DECLARE_HASHTABLE(insn_hash, 16); - struct section *whitelist; bool ignore_unreachables, c_file, hints, rodata; }; diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index b8f3cca8e58b..e99e1be19ad9 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * elf.c - ELF access library * * Adapted from kpatch (https://github.com/dynup/kpatch): * Copyright (C) 2013-2015 Josh Poimboeuf <jpoimboe@redhat.com> * Copyright (C) 2014 Seth Jennings <sjenning@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #include <sys/types.h> @@ -219,7 +207,7 @@ static int read_sections(struct elf *elf) static int read_symbols(struct elf *elf) { struct section *symtab, *sec; - struct symbol *sym, *pfunc; + struct symbol *sym, *pfunc, *alias; struct list_head *entry, *tmp; int symbols_nr, i; char *coldstr; @@ -239,6 +227,7 @@ static int read_symbols(struct elf *elf) return -1; } memset(sym, 0, sizeof(*sym)); + alias = sym; sym->idx = i; @@ -288,11 +277,17 @@ static int read_symbols(struct elf *elf) break; } - if (sym->offset == s->offset && sym->len >= s->len) { - entry = tmp; - break; + if (sym->offset == s->offset) { + if (sym->len == s->len && alias == sym) + alias = s; + + if (sym->len >= s->len) { + entry = tmp; + break; + } } } + sym->alias = alias; list_add(&sym->list, entry); hash_add(sym->sec->symbol_hash, &sym->hash, sym->idx); } diff --git a/tools/objtool/elf.h b/tools/objtool/elf.h index bc97ed86b9cd..e44ca5d51871 100644 --- a/tools/objtool/elf.h +++ b/tools/objtool/elf.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _OBJTOOL_ELF_H @@ -61,7 +49,8 @@ struct symbol { unsigned char bind, type; unsigned long offset; unsigned int len; - struct symbol *pfunc, *cfunc; + struct symbol *pfunc, *cfunc, *alias; + bool uaccess_safe; }; struct rela { diff --git a/tools/objtool/objtool.c b/tools/objtool/objtool.c index 07f329919828..0b3528f05053 100644 --- a/tools/objtool/objtool.c +++ b/tools/objtool/objtool.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ /* diff --git a/tools/objtool/orc.h b/tools/objtool/orc.h index b0e92a6d0903..ee2832221e62 100644 --- a/tools/objtool/orc.h +++ b/tools/objtool/orc.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _ORC_H diff --git a/tools/objtool/orc_dump.c b/tools/objtool/orc_dump.c index faa444270ee3..13ccf775a83a 100644 --- a/tools/objtool/orc_dump.c +++ b/tools/objtool/orc_dump.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #include <unistd.h> diff --git a/tools/objtool/orc_gen.c b/tools/objtool/orc_gen.c index 3f98dcfbc177..27a4112848c2 100644 --- a/tools/objtool/orc_gen.c +++ b/tools/objtool/orc_gen.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2017 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #include <stdlib.h> diff --git a/tools/objtool/special.c b/tools/objtool/special.c index 50af4e1274b3..fdbaa611146d 100644 --- a/tools/objtool/special.c +++ b/tools/objtool/special.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ /* @@ -23,6 +11,7 @@ #include <stdlib.h> #include <string.h> +#include "builtin.h" #include "special.h" #include "warn.h" @@ -42,6 +31,7 @@ #define ALT_NEW_LEN_OFFSET 11 #define X86_FEATURE_POPCNT (4*32+23) +#define X86_FEATURE_SMAP (9*32+20) struct special_entry { const char *sec; @@ -110,6 +100,22 @@ static int get_alt_entry(struct elf *elf, struct special_entry *entry, */ if (feature == X86_FEATURE_POPCNT) alt->skip_orig = true; + + /* + * If UACCESS validation is enabled; force that alternative; + * otherwise force it the other way. + * + * What we want to avoid is having both the original and the + * alternative code flow at the same time, in that case we can + * find paths that see the STAC but take the NOP instead of + * CLAC and the other way around. + */ + if (feature == X86_FEATURE_SMAP) { + if (uaccess) + alt->skip_orig = true; + else + alt->skip_alt = true; + } } orig_rela = find_rela_by_dest(sec, offset + entry->orig); diff --git a/tools/objtool/special.h b/tools/objtool/special.h index fad1d092f679..35061530e46e 100644 --- a/tools/objtool/special.h +++ b/tools/objtool/special.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _SPECIAL_H @@ -26,6 +14,7 @@ struct special_alt { bool group; bool skip_orig; + bool skip_alt; bool jump_or_nop; struct section *orig_sec; diff --git a/tools/objtool/warn.h b/tools/objtool/warn.h index afd9f7a05f6d..cbb0a02b7480 100644 --- a/tools/objtool/warn.h +++ b/tools/objtool/warn.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015 Josh Poimboeuf <jpoimboe@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _WARN_H @@ -64,6 +52,14 @@ static inline char *offstr(struct section *sec, unsigned long offset) free(_str); \ }) +#define BT_FUNC(format, insn, ...) \ +({ \ + struct instruction *_insn = (insn); \ + char *_str = offstr(_insn->sec, _insn->offset); \ + WARN(" %s: " format, _str, ##__VA_ARGS__); \ + free(_str); \ +}) + #define WARN_ELF(format, ...) \ WARN(format ": %s", ##__VA_ARGS__, elf_errmsg(-1)) diff --git a/tools/pci/Makefile b/tools/pci/Makefile index 46e4c2f318c9..6876ee4bd78c 100644 --- a/tools/pci/Makefile +++ b/tools/pci/Makefile @@ -14,9 +14,12 @@ MAKEFLAGS += -r CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include -ALL_TARGETS := pcitest pcitest.sh +ALL_TARGETS := pcitest ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) +SCRIPTS := pcitest.sh +ALL_SCRIPTS := $(patsubst %,$(OUTPUT)%,$(SCRIPTS)) + all: $(ALL_PROGRAMS) export srctree OUTPUT CC LD CFLAGS @@ -44,8 +47,11 @@ clean: install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \ - for program in $(ALL_PROGRAMS); do \ + for program in $(ALL_PROGRAMS) pcitest.sh; do \ install $$program $(DESTDIR)$(bindir); \ + done; \ + for script in $(ALL_SCRIPTS); do \ + install $$script $(DESTDIR)$(bindir); \ done FORCE: diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c index ec4d51f3308b..5fa5c2bdd427 100644 --- a/tools/pci/pcitest.c +++ b/tools/pci/pcitest.c @@ -140,6 +140,7 @@ static void run_test(struct pci_test *test) } fflush(stdout); + return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */ } int main(int argc, char **argv) @@ -162,7 +163,7 @@ int main(int argc, char **argv) /* set default endpoint device */ test->device = "/dev/pci-endpoint-test.0"; - while ((c = getopt(argc, argv, "D:b:m:x:i:Ilrwcs:")) != EOF) + while ((c = getopt(argc, argv, "D:b:m:x:i:Ilhrwcs:")) != EOF) switch (c) { case 'D': test->device = optarg; @@ -206,7 +207,6 @@ int main(int argc, char **argv) case 's': test->size = strtoul(optarg, NULL, 0); continue; - case '?': case 'h': default: usage: @@ -224,10 +224,10 @@ usage: "\t-w Write buffer test\n" "\t-c Copy buffer test\n" "\t-s <size> Size of buffer {default: 100KB}\n", + "\t-h Print this help message\n", argv[0]); return -EINVAL; } - run_test(test); - return 0; + return run_test(test); } diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile index ac841bc5c35b..6d148a40551c 100644 --- a/tools/perf/Documentation/Makefile +++ b/tools/perf/Documentation/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only include ../../scripts/Makefile.include include ../../scripts/utilities.mak diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt index 138fb6e94b3c..18ed1b0fceb3 100644 --- a/tools/perf/Documentation/perf-list.txt +++ b/tools/perf/Documentation/perf-list.txt @@ -199,6 +199,18 @@ also be supplied. For example: perf stat -C 0 -e 'hv_gpci/dtbp_ptitc,phys_processor_idx=0x2/' ... +EVENT QUALIFIERS: + +It is also possible to add extra qualifiers to an event: + +percore: + +Sums up the event counts for all hardware threads in a core, e.g.: + + + perf stat -e cpu/event=0,umask=0x3,percore=1/ + + EVENT GROUPS ------------ diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt index 8fe4dffcadd0..de269430720a 100644 --- a/tools/perf/Documentation/perf-record.txt +++ b/tools/perf/Documentation/perf-record.txt @@ -406,7 +406,8 @@ symbolic names, e.g. on x86, ax, si. To list the available registers use --intr-regs=ax,bx. The list of register is architecture dependent. --user-regs:: -Capture user registers at sample time. Same arguments as -I. +Similar to -I, but capture user registers at sample time. To list the available +user registers use --user-regs=\?. --running-time:: Record running and enabled time for read events (:S) @@ -459,6 +460,30 @@ Set affinity mask of trace reading thread according to the policy defined by 'mo node - thread affinity mask is set to NUMA node cpu mask of the processed mmap buffer cpu - thread affinity mask is set to cpu of the processed mmap buffer +--mmap-flush=number:: + +Specify minimal number of bytes that is extracted from mmap data pages and +processed for output. One can specify the number using B/K/M/G suffixes. + +The maximal allowed value is a quarter of the size of mmaped data pages. + +The default option value is 1 byte which means that every time that the output +writing thread finds some new data in the mmaped buffer the data is extracted, +possibly compressed (-z) and written to the output, perf.data or pipe. + +Larger data chunks are compressed more effectively in comparison to smaller +chunks so extraction of larger chunks from the mmap data pages is preferable +from the perspective of output size reduction. + +Also at some cases executing less output write syscalls with bigger data size +can take less time than executing more output write syscalls with smaller data +size thus lowering runtime profiling overhead. + +-z:: +--compression-level[=n]:: +Produce compressed trace using specified level n (default: 1 - fastest compression, +22 - smallest trace) + --all-kernel:: Configure all used events to run in kernel space. diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt index 39c05f89104e..1e312c2672e4 100644 --- a/tools/perf/Documentation/perf-stat.txt +++ b/tools/perf/Documentation/perf-stat.txt @@ -43,6 +43,10 @@ report:: param1 and param2 are defined as formats for the PMU in /sys/bus/event_source/devices/<pmu>/format/* + 'percore' is a event qualifier that sums up the event counts for both + hardware threads in a core. For example: + perf stat -A -a -e cpu/event,percore=1/,otherevent ... + - a symbolically formed event like 'pmu/config=M,config1=N,config2=K/' where M, N, K are numbers (in decimal, hex, octal format). Acceptable values for each of 'config', 'config1' and 'config2' diff --git a/tools/perf/Documentation/perf.data-file-format.txt b/tools/perf/Documentation/perf.data-file-format.txt index 593ef49b273c..6967e9b02be5 100644 --- a/tools/perf/Documentation/perf.data-file-format.txt +++ b/tools/perf/Documentation/perf.data-file-format.txt @@ -272,6 +272,19 @@ struct { Two uint64_t for the time of first sample and the time of last sample. + HEADER_COMPRESSED = 27, + +struct { + u32 version; + u32 type; + u32 level; + u32 ratio; + u32 mmap_len; +}; + +Indicates that trace contains records of PERF_RECORD_COMPRESSED type +that have perf_events records in compressed form. + other bits are reserved and should ignored for now HEADER_FEAT_BITS = 256, @@ -437,6 +450,17 @@ struct auxtrace_error_event { Describes a header feature. These are records used in pipe-mode that contain information that otherwise would be in perf.data file's header. + PERF_RECORD_COMPRESSED = 81, + +struct compressed_event { + struct perf_event_header header; + char data[]; +}; + +The header is followed by compressed data frame that can be decompressed +into array of perf trace records. The size of the entire compressed event +record including the header is limited by the max value of header.size. + Event types Define the event attributes with their IDs. diff --git a/tools/perf/Documentation/perf.txt b/tools/perf/Documentation/perf.txt index 864e37597252..401f0ed67439 100644 --- a/tools/perf/Documentation/perf.txt +++ b/tools/perf/Documentation/perf.txt @@ -22,6 +22,8 @@ OPTIONS verbose - general debug messages ordered-events - ordered events object debug messages data-convert - data convert command debug messages + stderr - write debug output (option -v) to stderr + in browser mode --buildid-dir:: Setup buildid cache directory. It has higher priority than diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config index fe3f97e342fa..85fbcd265351 100644 --- a/tools/perf/Makefile.config +++ b/tools/perf/Makefile.config @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifeq ($(src-perf),) src-perf := $(srctree)/tools/perf @@ -59,6 +60,10 @@ ifeq ($(SRCARCH),arm64) LIBUNWIND_LIBS = -lunwind -lunwind-aarch64 endif +ifeq ($(SRCARCH),csky) + NO_PERF_REGS := 0 +endif + ifeq ($(ARCH),s390) NO_PERF_REGS := 0 NO_SYSCALL_TABLE := 0 @@ -77,7 +82,7 @@ endif # Disable it on all other architectures in case libdw unwind # support is detected in system. Add supported architectures # to the check. -ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390)) +ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390 csky)) NO_LIBDW_DWARF_UNWIND := 1 endif @@ -152,6 +157,13 @@ endif FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS) FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf +ifdef LIBZSTD_DIR + LIBZSTD_CFLAGS := -I$(LIBZSTD_DIR)/lib + LIBZSTD_LDFLAGS := -L$(LIBZSTD_DIR)/lib +endif +FEATURE_CHECK_CFLAGS-libzstd := $(LIBZSTD_CFLAGS) +FEATURE_CHECK_LDFLAGS-libzstd := $(LIBZSTD_LDFLAGS) + FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi # include ARCH specific config -include $(src-perf)/arch/$(SRCARCH)/Makefile @@ -227,7 +239,7 @@ FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS) FEATURE_CHECK_LDFLAGS-libaio = -lrt -FEATURE_CHECK_LDFLAGS-disassembler-four-args = -lbfd -lopcodes +FEATURE_CHECK_LDFLAGS-disassembler-four-args = -lbfd -lopcodes -ldl CFLAGS += -fno-omit-frame-pointer CFLAGS += -ggdb3 @@ -787,6 +799,19 @@ ifndef NO_LZMA endif endif +ifndef NO_LIBZSTD + ifeq ($(feature-libzstd), 1) + CFLAGS += -DHAVE_ZSTD_SUPPORT + CFLAGS += $(LIBZSTD_CFLAGS) + LDFLAGS += $(LIBZSTD_LDFLAGS) + EXTLIBS += -lzstd + $(call detected,CONFIG_ZSTD) + else + msg := $(warning No libzstd found, disables trace compression, please install libzstd-dev[el] and/or set LIBZSTD_DIR); + NO_LIBZSTD := 1 + endif +endif + ifndef NO_BACKTRACE ifeq ($(feature-backtrace), 1) CFLAGS += -DHAVE_BACKTRACE_SUPPORT diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index e8c9f77e9010..4d46ca6d7e20 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only include ../scripts/Makefile.include include ../scripts/Makefile.arch @@ -108,6 +109,9 @@ include ../scripts/utilities.mak # streaming for record mode. Currently Posix AIO trace streaming is # supported only when linking with glibc. # +# Define NO_LIBZSTD if you do not want support of Zstandard based runtime +# trace compression in record mode. +# # As per kernel Makefile, avoid funny character set dependencies unexport LC_ALL diff --git a/tools/perf/arch/arm/Makefile b/tools/perf/arch/arm/Makefile index 18b13518d8d8..1d88fdab13bf 100644 --- a/tools/perf/arch/arm/Makefile +++ b/tools/perf/arch/arm/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifndef NO_DWARF PERF_HAVE_DWARF_REGS := 1 endif diff --git a/tools/perf/arch/csky/Build b/tools/perf/arch/csky/Build new file mode 100644 index 000000000000..e4e5f33c84d8 --- /dev/null +++ b/tools/perf/arch/csky/Build @@ -0,0 +1 @@ +perf-y += util/ diff --git a/tools/perf/arch/csky/Makefile b/tools/perf/arch/csky/Makefile new file mode 100644 index 000000000000..88c08eed9c7b --- /dev/null +++ b/tools/perf/arch/csky/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +ifndef NO_DWARF +PERF_HAVE_DWARF_REGS := 1 +endif diff --git a/tools/perf/arch/csky/include/perf_regs.h b/tools/perf/arch/csky/include/perf_regs.h new file mode 100644 index 000000000000..8f336ea1161a --- /dev/null +++ b/tools/perf/arch/csky/include/perf_regs.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// Copyright (C) 2019 Hangzhou C-SKY Microsystems co.,ltd. + +#ifndef ARCH_PERF_REGS_H +#define ARCH_PERF_REGS_H + +#include <stdlib.h> +#include <linux/types.h> +#include <asm/perf_regs.h> + +#define PERF_REGS_MASK ((1ULL << PERF_REG_CSKY_MAX) - 1) +#define PERF_REGS_MAX PERF_REG_CSKY_MAX +#define PERF_SAMPLE_REGS_ABI PERF_SAMPLE_REGS_ABI_32 + +#define PERF_REG_IP PERF_REG_CSKY_PC +#define PERF_REG_SP PERF_REG_CSKY_SP + +static inline const char *perf_reg_name(int id) +{ + switch (id) { + case PERF_REG_CSKY_A0: + return "a0"; + case PERF_REG_CSKY_A1: + return "a1"; + case PERF_REG_CSKY_A2: + return "a2"; + case PERF_REG_CSKY_A3: + return "a3"; + case PERF_REG_CSKY_REGS0: + return "regs0"; + case PERF_REG_CSKY_REGS1: + return "regs1"; + case PERF_REG_CSKY_REGS2: + return "regs2"; + case PERF_REG_CSKY_REGS3: + return "regs3"; + case PERF_REG_CSKY_REGS4: + return "regs4"; + case PERF_REG_CSKY_REGS5: + return "regs5"; + case PERF_REG_CSKY_REGS6: + return "regs6"; + case PERF_REG_CSKY_REGS7: + return "regs7"; + case PERF_REG_CSKY_REGS8: + return "regs8"; + case PERF_REG_CSKY_REGS9: + return "regs9"; + case PERF_REG_CSKY_SP: + return "sp"; + case PERF_REG_CSKY_LR: + return "lr"; + case PERF_REG_CSKY_PC: + return "pc"; +#if defined(__CSKYABIV2__) + case PERF_REG_CSKY_EXREGS0: + return "exregs0"; + case PERF_REG_CSKY_EXREGS1: + return "exregs1"; + case PERF_REG_CSKY_EXREGS2: + return "exregs2"; + case PERF_REG_CSKY_EXREGS3: + return "exregs3"; + case PERF_REG_CSKY_EXREGS4: + return "exregs4"; + case PERF_REG_CSKY_EXREGS5: + return "exregs5"; + case PERF_REG_CSKY_EXREGS6: + return "exregs6"; + case PERF_REG_CSKY_EXREGS7: + return "exregs7"; + case PERF_REG_CSKY_EXREGS8: + return "exregs8"; + case PERF_REG_CSKY_EXREGS9: + return "exregs9"; + case PERF_REG_CSKY_EXREGS10: + return "exregs10"; + case PERF_REG_CSKY_EXREGS11: + return "exregs11"; + case PERF_REG_CSKY_EXREGS12: + return "exregs12"; + case PERF_REG_CSKY_EXREGS13: + return "exregs13"; + case PERF_REG_CSKY_EXREGS14: + return "exregs14"; + case PERF_REG_CSKY_TLS: + return "tls"; + case PERF_REG_CSKY_HI: + return "hi"; + case PERF_REG_CSKY_LO: + return "lo"; +#endif + default: + return NULL; + } + + return NULL; +} + +#endif /* ARCH_PERF_REGS_H */ diff --git a/tools/perf/arch/csky/util/Build b/tools/perf/arch/csky/util/Build new file mode 100644 index 000000000000..1160bb2332ba --- /dev/null +++ b/tools/perf/arch/csky/util/Build @@ -0,0 +1,2 @@ +perf-$(CONFIG_DWARF) += dwarf-regs.o +perf-$(CONFIG_LIBDW_DWARF_UNWIND) += unwind-libdw.o diff --git a/tools/perf/arch/csky/util/dwarf-regs.c b/tools/perf/arch/csky/util/dwarf-regs.c new file mode 100644 index 000000000000..ca86ecaeacbb --- /dev/null +++ b/tools/perf/arch/csky/util/dwarf-regs.c @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2019 Hangzhou C-SKY Microsystems co.,ltd. +// Mapping of DWARF debug register numbers into register names. + +#include <stddef.h> +#include <dwarf-regs.h> + +#if defined(__CSKYABIV2__) +#define CSKY_MAX_REGS 73 +const char *csky_dwarf_regs_table[CSKY_MAX_REGS] = { + /* r0 ~ r8 */ + "%a0", "%a1", "%a2", "%a3", "%regs0", "%regs1", "%regs2", "%regs3", + /* r9 ~ r15 */ + "%regs4", "%regs5", "%regs6", "%regs7", "%regs8", "%regs9", "%sp", + "%lr", + /* r16 ~ r23 */ + "%exregs0", "%exregs1", "%exregs2", "%exregs3", "%exregs4", + "%exregs5", "%exregs6", "%exregs7", + /* r24 ~ r31 */ + "%exregs8", "%exregs9", "%exregs10", "%exregs11", "%exregs12", + "%exregs13", "%exregs14", "%tls", + "%pc", NULL, NULL, NULL, "%hi", "%lo", NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "%epc", +}; +#else +#define CSKY_MAX_REGS 57 +const char *csky_dwarf_regs_table[CSKY_MAX_REGS] = { + /* r0 ~ r8 */ + "%sp", "%regs9", "%a0", "%a1", "%a2", "%a3", "%regs0", "%regs1", + /* r9 ~ r15 */ + "%regs2", "%regs3", "%regs4", "%regs5", "%regs6", "%regs7", "%regs8", + "%lr", + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "%epc", +}; +#endif + +const char *get_arch_regstr(unsigned int n) +{ + return (n < CSKY_MAX_REGS) ? csky_dwarf_regs_table[n] : NULL; +} diff --git a/tools/perf/arch/csky/util/unwind-libdw.c b/tools/perf/arch/csky/util/unwind-libdw.c new file mode 100644 index 000000000000..4bb4a06776e4 --- /dev/null +++ b/tools/perf/arch/csky/util/unwind-libdw.c @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2019 Hangzhou C-SKY Microsystems co.,ltd. + +#include <elfutils/libdwfl.h> +#include "../../util/unwind-libdw.h" +#include "../../util/perf_regs.h" +#include "../../util/event.h" + +bool libdw__arch_set_initial_registers(Dwfl_Thread *thread, void *arg) +{ + struct unwind_info *ui = arg; + struct regs_dump *user_regs = &ui->sample->user_regs; + Dwarf_Word dwarf_regs[PERF_REG_CSKY_MAX]; + +#define REG(r) ({ \ + Dwarf_Word val = 0; \ + perf_reg_value(&val, user_regs, PERF_REG_CSKY_##r); \ + val; \ +}) + +#if defined(__CSKYABIV2__) + dwarf_regs[0] = REG(A0); + dwarf_regs[1] = REG(A1); + dwarf_regs[2] = REG(A2); + dwarf_regs[3] = REG(A3); + dwarf_regs[4] = REG(REGS0); + dwarf_regs[5] = REG(REGS1); + dwarf_regs[6] = REG(REGS2); + dwarf_regs[7] = REG(REGS3); + dwarf_regs[8] = REG(REGS4); + dwarf_regs[9] = REG(REGS5); + dwarf_regs[10] = REG(REGS6); + dwarf_regs[11] = REG(REGS7); + dwarf_regs[12] = REG(REGS8); + dwarf_regs[13] = REG(REGS9); + dwarf_regs[14] = REG(SP); + dwarf_regs[15] = REG(LR); + dwarf_regs[16] = REG(EXREGS0); + dwarf_regs[17] = REG(EXREGS1); + dwarf_regs[18] = REG(EXREGS2); + dwarf_regs[19] = REG(EXREGS3); + dwarf_regs[20] = REG(EXREGS4); + dwarf_regs[21] = REG(EXREGS5); + dwarf_regs[22] = REG(EXREGS6); + dwarf_regs[23] = REG(EXREGS7); + dwarf_regs[24] = REG(EXREGS8); + dwarf_regs[25] = REG(EXREGS9); + dwarf_regs[26] = REG(EXREGS10); + dwarf_regs[27] = REG(EXREGS11); + dwarf_regs[28] = REG(EXREGS12); + dwarf_regs[29] = REG(EXREGS13); + dwarf_regs[30] = REG(EXREGS14); + dwarf_regs[31] = REG(TLS); + dwarf_regs[32] = REG(PC); +#else + dwarf_regs[0] = REG(SP); + dwarf_regs[1] = REG(REGS9); + dwarf_regs[2] = REG(A0); + dwarf_regs[3] = REG(A1); + dwarf_regs[4] = REG(A2); + dwarf_regs[5] = REG(A3); + dwarf_regs[6] = REG(REGS0); + dwarf_regs[7] = REG(REGS1); + dwarf_regs[8] = REG(REGS2); + dwarf_regs[9] = REG(REGS3); + dwarf_regs[10] = REG(REGS4); + dwarf_regs[11] = REG(REGS5); + dwarf_regs[12] = REG(REGS6); + dwarf_regs[13] = REG(REGS7); + dwarf_regs[14] = REG(REGS8); + dwarf_regs[15] = REG(LR); +#endif + dwfl_thread_state_register_pc(thread, REG(PC)); + + return dwfl_thread_state_registers(thread, 0, PERF_REG_CSKY_MAX, + dwarf_regs); +} diff --git a/tools/perf/arch/s390/Makefile b/tools/perf/arch/s390/Makefile index dfa6e3103437..cb198787570a 100644 --- a/tools/perf/arch/s390/Makefile +++ b/tools/perf/arch/s390/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifndef NO_DWARF PERF_HAVE_DWARF_REGS := 1 endif diff --git a/tools/perf/arch/sh/Makefile b/tools/perf/arch/sh/Makefile index 7fbca175099e..88c08eed9c7b 100644 --- a/tools/perf/arch/sh/Makefile +++ b/tools/perf/arch/sh/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifndef NO_DWARF PERF_HAVE_DWARF_REGS := 1 endif diff --git a/tools/perf/arch/sparc/Makefile b/tools/perf/arch/sparc/Makefile index 275dea7ff59a..4031db72ba71 100644 --- a/tools/perf/arch/sparc/Makefile +++ b/tools/perf/arch/sparc/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifndef NO_DWARF PERF_HAVE_DWARF_REGS := 1 endif diff --git a/tools/perf/arch/x86/include/perf_regs.h b/tools/perf/arch/x86/include/perf_regs.h index 7f6d538f8a89..b7cd91a9014f 100644 --- a/tools/perf/arch/x86/include/perf_regs.h +++ b/tools/perf/arch/x86/include/perf_regs.h @@ -8,9 +8,10 @@ void perf_regs_load(u64 *regs); +#define PERF_REGS_MAX PERF_REG_X86_XMM_MAX +#define PERF_XMM_REGS_MASK (~((1ULL << PERF_REG_X86_XMM0) - 1)) #ifndef HAVE_ARCH_X86_64_SUPPORT #define PERF_REGS_MASK ((1ULL << PERF_REG_X86_32_MAX) - 1) -#define PERF_REGS_MAX PERF_REG_X86_32_MAX #define PERF_SAMPLE_REGS_ABI PERF_SAMPLE_REGS_ABI_32 #else #define REG_NOSUPPORT ((1ULL << PERF_REG_X86_DS) | \ @@ -18,7 +19,6 @@ void perf_regs_load(u64 *regs); (1ULL << PERF_REG_X86_FS) | \ (1ULL << PERF_REG_X86_GS)) #define PERF_REGS_MASK (((1ULL << PERF_REG_X86_64_MAX) - 1) & ~REG_NOSUPPORT) -#define PERF_REGS_MAX PERF_REG_X86_64_MAX #define PERF_SAMPLE_REGS_ABI PERF_SAMPLE_REGS_ABI_64 #endif #define PERF_REG_IP PERF_REG_X86_IP @@ -77,6 +77,28 @@ static inline const char *perf_reg_name(int id) case PERF_REG_X86_R15: return "R15"; #endif /* HAVE_ARCH_X86_64_SUPPORT */ + +#define XMM(x) \ + case PERF_REG_X86_XMM ## x: \ + case PERF_REG_X86_XMM ## x + 1: \ + return "XMM" #x; + XMM(0) + XMM(1) + XMM(2) + XMM(3) + XMM(4) + XMM(5) + XMM(6) + XMM(7) + XMM(8) + XMM(9) + XMM(10) + XMM(11) + XMM(12) + XMM(13) + XMM(14) + XMM(15) +#undef XMM default: return NULL; } diff --git a/tools/perf/arch/x86/util/perf_regs.c b/tools/perf/arch/x86/util/perf_regs.c index fead6b3b4206..7886ca5263e3 100644 --- a/tools/perf/arch/x86/util/perf_regs.c +++ b/tools/perf/arch/x86/util/perf_regs.c @@ -31,6 +31,22 @@ const struct sample_reg sample_reg_masks[] = { SMPL_REG(R14, PERF_REG_X86_R14), SMPL_REG(R15, PERF_REG_X86_R15), #endif + SMPL_REG2(XMM0, PERF_REG_X86_XMM0), + SMPL_REG2(XMM1, PERF_REG_X86_XMM1), + SMPL_REG2(XMM2, PERF_REG_X86_XMM2), + SMPL_REG2(XMM3, PERF_REG_X86_XMM3), + SMPL_REG2(XMM4, PERF_REG_X86_XMM4), + SMPL_REG2(XMM5, PERF_REG_X86_XMM5), + SMPL_REG2(XMM6, PERF_REG_X86_XMM6), + SMPL_REG2(XMM7, PERF_REG_X86_XMM7), + SMPL_REG2(XMM8, PERF_REG_X86_XMM8), + SMPL_REG2(XMM9, PERF_REG_X86_XMM9), + SMPL_REG2(XMM10, PERF_REG_X86_XMM10), + SMPL_REG2(XMM11, PERF_REG_X86_XMM11), + SMPL_REG2(XMM12, PERF_REG_X86_XMM12), + SMPL_REG2(XMM13, PERF_REG_X86_XMM13), + SMPL_REG2(XMM14, PERF_REG_X86_XMM14), + SMPL_REG2(XMM15, PERF_REG_X86_XMM15), SMPL_REG_END }; @@ -254,3 +270,31 @@ int arch_sdt_arg_parse_op(char *old_op, char **new_op) return SDT_ARG_VALID; } + +uint64_t arch__intr_reg_mask(void) +{ + struct perf_event_attr attr = { + .type = PERF_TYPE_HARDWARE, + .config = PERF_COUNT_HW_CPU_CYCLES, + .sample_type = PERF_SAMPLE_REGS_INTR, + .sample_regs_intr = PERF_XMM_REGS_MASK, + .precise_ip = 1, + .disabled = 1, + .exclude_kernel = 1, + }; + int fd; + /* + * In an unnamed union, init it here to build on older gcc versions + */ + attr.sample_period = 1; + + event_attr_init(&attr); + + fd = sys_perf_event_open(&attr, 0, -1, -1, 0); + if (fd != -1) { + close(fd); + return (PERF_XMM_REGS_MASK | PERF_REGS_MASK); + } + + return PERF_REGS_MASK; +} diff --git a/tools/perf/arch/xtensa/Makefile b/tools/perf/arch/xtensa/Makefile index 7fbca175099e..88c08eed9c7b 100644 --- a/tools/perf/arch/xtensa/Makefile +++ b/tools/perf/arch/xtensa/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only ifndef NO_DWARF PERF_HAVE_DWARF_REGS := 1 endif diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index 98ad783efc69..a7784554a80d 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -39,6 +39,10 @@ #include <numa.h> #include <numaif.h> +#ifndef RUSAGE_THREAD +# define RUSAGE_THREAD 1 +#endif + /* * Regular printout to the terminal, supressed if -q is specified: */ diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index 67f9d9ffacfb..77deb3a40596 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -159,8 +159,6 @@ static int hist_iter__branch_callback(struct hist_entry_iter *iter, struct perf_evsel *evsel = iter->evsel; int err; - hist__account_cycles(sample->branch_stack, al, sample, false); - bi = he->branch_info; err = addr_map_symbol__inc_samples(&bi->from, sample, evsel); @@ -199,6 +197,8 @@ static int process_branch_callback(struct perf_evsel *evsel, if (a.map != NULL) a.map->dso->hit = 1; + hist__account_cycles(sample->branch_stack, al, sample, false); + ret = hist_entry_iter__add(&iter, &a, PERF_MAX_STACK_DEPTH, ann); return ret; } diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c index 24086b7f1b14..8e0e06d3edfc 100644 --- a/tools/perf/builtin-inject.c +++ b/tools/perf/builtin-inject.c @@ -837,6 +837,9 @@ int cmd_inject(int argc, const char **argv) if (inject.session == NULL) return -1; + if (zstd_init(&(inject.session->zstd_data), 0) < 0) + pr_warning("Decompression initialization failed.\n"); + if (inject.build_ids) { /* * to make sure the mmap records are ordered correctly @@ -867,6 +870,7 @@ int cmd_inject(int argc, const char **argv) ret = __cmd_inject(&inject); out_delete: + zstd_fini(&(inject.session->zstd_data)); perf_session__delete(inject.session); return ret; } diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index fa520f4b8095..b80eee455111 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -1975,7 +1975,7 @@ int cmd_kmem(int argc, const char **argv) goto out_delete; } - kmem_page_size = tep_get_page_size(evsel->tp_format->pevent); + kmem_page_size = tep_get_page_size(evsel->tp_format->tep); symbol_conf.use_callchain = true; } diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c index a8394b4f1167..e0312a1c4792 100644 --- a/tools/perf/builtin-list.c +++ b/tools/perf/builtin-list.c @@ -70,10 +70,11 @@ int cmd_list(int argc, const char **argv) print_symbol_events(NULL, PERF_TYPE_HARDWARE, event_symbols_hw, PERF_COUNT_HW_MAX, raw_dump); else if (strcmp(argv[i], "sw") == 0 || - strcmp(argv[i], "software") == 0) + strcmp(argv[i], "software") == 0) { print_symbol_events(NULL, PERF_TYPE_SOFTWARE, event_symbols_sw, PERF_COUNT_SW_MAX, raw_dump); - else if (strcmp(argv[i], "cache") == 0 || + print_tool_events(NULL, raw_dump); + } else if (strcmp(argv[i], "cache") == 0 || strcmp(argv[i], "hwcache") == 0) print_hwcache_events(NULL, raw_dump); else if (strcmp(argv[i], "pmu") == 0) @@ -113,6 +114,7 @@ int cmd_list(int argc, const char **argv) event_symbols_hw, PERF_COUNT_HW_MAX, raw_dump); print_symbol_events(s, PERF_TYPE_SOFTWARE, event_symbols_sw, PERF_COUNT_SW_MAX, raw_dump); + print_tool_events(s, raw_dump); print_hwcache_events(s, raw_dump); print_pmu_events(s, raw_dump, !desc_flag, long_desc_flag, diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 4e2d953d4bc5..e2c3a585a61e 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -133,6 +133,11 @@ static int record__write(struct record *rec, struct perf_mmap *map __maybe_unuse return 0; } +static int record__aio_enabled(struct record *rec); +static int record__comp_enabled(struct record *rec); +static size_t zstd_compress(struct perf_session *session, void *dst, size_t dst_size, + void *src, size_t src_size); + #ifdef HAVE_AIO_SUPPORT static int record__aio_write(struct aiocb *cblock, int trace_fd, void *buf, size_t size, off_t off) @@ -183,9 +188,9 @@ static int record__aio_complete(struct perf_mmap *md, struct aiocb *cblock) if (rem_size == 0) { cblock->aio_fildes = -1; /* - * md->refcount is incremented in perf_mmap__push() for - * every enqueued aio write request so decrement it because - * the request is now complete. + * md->refcount is incremented in record__aio_pushfn() for + * every aio write request started in record__aio_push() so + * decrement it because the request is now complete. */ perf_mmap__put(md); rc = 1; @@ -240,18 +245,89 @@ static int record__aio_sync(struct perf_mmap *md, bool sync_all) } while (1); } -static int record__aio_pushfn(void *to, struct aiocb *cblock, void *bf, size_t size, off_t off) +struct record_aio { + struct record *rec; + void *data; + size_t size; +}; + +static int record__aio_pushfn(struct perf_mmap *map, void *to, void *buf, size_t size) { - struct record *rec = to; - int ret, trace_fd = rec->session->data->file.fd; + struct record_aio *aio = to; - rec->samples++; + /* + * map->base data pointed by buf is copied into free map->aio.data[] buffer + * to release space in the kernel buffer as fast as possible, calling + * perf_mmap__consume() from perf_mmap__push() function. + * + * That lets the kernel to proceed with storing more profiling data into + * the kernel buffer earlier than other per-cpu kernel buffers are handled. + * + * Coping can be done in two steps in case the chunk of profiling data + * crosses the upper bound of the kernel buffer. In this case we first move + * part of data from map->start till the upper bound and then the reminder + * from the beginning of the kernel buffer till the end of the data chunk. + */ + + if (record__comp_enabled(aio->rec)) { + size = zstd_compress(aio->rec->session, aio->data + aio->size, + perf_mmap__mmap_len(map) - aio->size, + buf, size); + } else { + memcpy(aio->data + aio->size, buf, size); + } + + if (!aio->size) { + /* + * Increment map->refcount to guard map->aio.data[] buffer + * from premature deallocation because map object can be + * released earlier than aio write request started on + * map->aio.data[] buffer is complete. + * + * perf_mmap__put() is done at record__aio_complete() + * after started aio request completion or at record__aio_push() + * if the request failed to start. + */ + perf_mmap__get(map); + } + + aio->size += size; + + return size; +} + +static int record__aio_push(struct record *rec, struct perf_mmap *map, off_t *off) +{ + int ret, idx; + int trace_fd = rec->session->data->file.fd; + struct record_aio aio = { .rec = rec, .size = 0 }; + + /* + * Call record__aio_sync() to wait till map->aio.data[] buffer + * becomes available after previous aio write operation. + */ + + idx = record__aio_sync(map, false); + aio.data = map->aio.data[idx]; + ret = perf_mmap__push(map, &aio, record__aio_pushfn); + if (ret != 0) /* ret > 0 - no data, ret < 0 - error */ + return ret; - ret = record__aio_write(cblock, trace_fd, bf, size, off); + rec->samples++; + ret = record__aio_write(&(map->aio.cblocks[idx]), trace_fd, aio.data, aio.size, *off); if (!ret) { - rec->bytes_written += size; + *off += aio.size; + rec->bytes_written += aio.size; if (switch_output_size(rec)) trigger_hit(&switch_output_trigger); + } else { + /* + * Decrement map->refcount incremented in record__aio_pushfn() + * back if record__aio_write() operation failed to start, otherwise + * map->refcount is decremented in record__aio_complete() after + * aio write operation finishes successfully. + */ + perf_mmap__put(map); } return ret; @@ -273,7 +349,7 @@ static void record__aio_mmap_read_sync(struct record *rec) struct perf_evlist *evlist = rec->evlist; struct perf_mmap *maps = evlist->mmap; - if (!rec->opts.nr_cblocks) + if (!record__aio_enabled(rec)) return; for (i = 0; i < evlist->nr_mmaps; i++) { @@ -307,13 +383,8 @@ static int record__aio_parse(const struct option *opt, #else /* HAVE_AIO_SUPPORT */ static int nr_cblocks_max = 0; -static int record__aio_sync(struct perf_mmap *md __maybe_unused, bool sync_all __maybe_unused) -{ - return -1; -} - -static int record__aio_pushfn(void *to __maybe_unused, struct aiocb *cblock __maybe_unused, - void *bf __maybe_unused, size_t size __maybe_unused, off_t off __maybe_unused) +static int record__aio_push(struct record *rec __maybe_unused, struct perf_mmap *map __maybe_unused, + off_t *off __maybe_unused) { return -1; } @@ -337,6 +408,67 @@ static int record__aio_enabled(struct record *rec) return rec->opts.nr_cblocks > 0; } +#define MMAP_FLUSH_DEFAULT 1 +static int record__mmap_flush_parse(const struct option *opt, + const char *str, + int unset) +{ + int flush_max; + struct record_opts *opts = (struct record_opts *)opt->value; + static struct parse_tag tags[] = { + { .tag = 'B', .mult = 1 }, + { .tag = 'K', .mult = 1 << 10 }, + { .tag = 'M', .mult = 1 << 20 }, + { .tag = 'G', .mult = 1 << 30 }, + { .tag = 0 }, + }; + + if (unset) + return 0; + + if (str) { + opts->mmap_flush = parse_tag_value(str, tags); + if (opts->mmap_flush == (int)-1) + opts->mmap_flush = strtol(str, NULL, 0); + } + + if (!opts->mmap_flush) + opts->mmap_flush = MMAP_FLUSH_DEFAULT; + + flush_max = perf_evlist__mmap_size(opts->mmap_pages); + flush_max /= 4; + if (opts->mmap_flush > flush_max) + opts->mmap_flush = flush_max; + + return 0; +} + +#ifdef HAVE_ZSTD_SUPPORT +static unsigned int comp_level_default = 1; + +static int record__parse_comp_level(const struct option *opt, const char *str, int unset) +{ + struct record_opts *opts = opt->value; + + if (unset) { + opts->comp_level = 0; + } else { + if (str) + opts->comp_level = strtol(str, NULL, 0); + if (!opts->comp_level) + opts->comp_level = comp_level_default; + } + + return 0; +} +#endif +static unsigned int comp_level_max = 22; + +static int record__comp_enabled(struct record *rec) +{ + return rec->opts.comp_level > 0; +} + static int process_synthesized_event(struct perf_tool *tool, union perf_event *event, struct perf_sample *sample __maybe_unused, @@ -350,6 +482,11 @@ static int record__pushfn(struct perf_mmap *map, void *to, void *bf, size_t size { struct record *rec = to; + if (record__comp_enabled(rec)) { + size = zstd_compress(rec->session, map->data, perf_mmap__mmap_len(map), bf, size); + bf = map->data; + } + rec->samples++; return record__write(rec, map, bf, size); } @@ -546,7 +683,8 @@ static int record__mmap_evlist(struct record *rec, if (perf_evlist__mmap_ex(evlist, opts->mmap_pages, opts->auxtrace_mmap_pages, opts->auxtrace_snapshot_mode, - opts->nr_cblocks, opts->affinity) < 0) { + opts->nr_cblocks, opts->affinity, + opts->mmap_flush, opts->comp_level) < 0) { if (errno == EPERM) { pr_err("Permission error mapping pages.\n" "Consider increasing " @@ -735,15 +873,46 @@ static void record__adjust_affinity(struct record *rec, struct perf_mmap *map) } } +static size_t process_comp_header(void *record, size_t increment) +{ + struct compressed_event *event = record; + size_t size = sizeof(*event); + + if (increment) { + event->header.size += increment; + return increment; + } + + event->header.type = PERF_RECORD_COMPRESSED; + event->header.size = size; + + return size; +} + +static size_t zstd_compress(struct perf_session *session, void *dst, size_t dst_size, + void *src, size_t src_size) +{ + size_t compressed; + size_t max_record_size = PERF_SAMPLE_MAX_SIZE - sizeof(struct compressed_event) - 1; + + compressed = zstd_compress_stream_to_records(&session->zstd_data, dst, dst_size, src, src_size, + max_record_size, process_comp_header); + + session->bytes_transferred += src_size; + session->bytes_compressed += compressed; + + return compressed; +} + static int record__mmap_read_evlist(struct record *rec, struct perf_evlist *evlist, - bool overwrite) + bool overwrite, bool synch) { u64 bytes_written = rec->bytes_written; int i; int rc = 0; struct perf_mmap *maps; int trace_fd = rec->data.file.fd; - off_t off; + off_t off = 0; if (!evlist) return 0; @@ -759,28 +928,33 @@ static int record__mmap_read_evlist(struct record *rec, struct perf_evlist *evli off = record__aio_get_pos(trace_fd); for (i = 0; i < evlist->nr_mmaps; i++) { + u64 flush = 0; struct perf_mmap *map = &maps[i]; if (map->base) { record__adjust_affinity(rec, map); + if (synch) { + flush = map->flush; + map->flush = 1; + } if (!record__aio_enabled(rec)) { - if (perf_mmap__push(map, rec, record__pushfn) != 0) { + if (perf_mmap__push(map, rec, record__pushfn) < 0) { + if (synch) + map->flush = flush; rc = -1; goto out; } } else { - int idx; - /* - * Call record__aio_sync() to wait till map->data buffer - * becomes available after previous aio write request. - */ - idx = record__aio_sync(map, false); - if (perf_mmap__aio_push(map, rec, idx, record__aio_pushfn, &off) != 0) { + if (record__aio_push(rec, map, &off) < 0) { record__aio_set_pos(trace_fd, off); + if (synch) + map->flush = flush; rc = -1; goto out; } } + if (synch) + map->flush = flush; } if (map->auxtrace_mmap.base && !rec->opts.auxtrace_snapshot_mode && @@ -806,15 +980,15 @@ out: return rc; } -static int record__mmap_read_all(struct record *rec) +static int record__mmap_read_all(struct record *rec, bool synch) { int err; - err = record__mmap_read_evlist(rec, rec->evlist, false); + err = record__mmap_read_evlist(rec, rec->evlist, false, synch); if (err) return err; - return record__mmap_read_evlist(rec, rec->evlist, true); + return record__mmap_read_evlist(rec, rec->evlist, true, synch); } static void record__init_features(struct record *rec) @@ -841,6 +1015,8 @@ static void record__init_features(struct record *rec) perf_header__clear_feat(&session->header, HEADER_CLOCKID); perf_header__clear_feat(&session->header, HEADER_DIR_FORMAT); + if (!record__comp_enabled(rec)) + perf_header__clear_feat(&session->header, HEADER_COMPRESSED); perf_header__clear_feat(&session->header, HEADER_STAT); } @@ -1139,6 +1315,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) bool disabled = false, draining = false; struct perf_evlist *sb_evlist = NULL; int fd; + float ratio = 0; atexit(record__sig_exit); signal(SIGCHLD, sig_handler); @@ -1168,6 +1345,14 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) fd = perf_data__fd(data); rec->session = session; + if (zstd_init(&session->zstd_data, rec->opts.comp_level) < 0) { + pr_err("Compression initialization failed.\n"); + return -1; + } + + session->header.env.comp_type = PERF_COMP_ZSTD; + session->header.env.comp_level = rec->opts.comp_level; + record__init_features(rec); if (rec->opts.use_clockid && rec->opts.clockid_res_ns) @@ -1197,6 +1382,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) err = -1; goto out_child; } + session->header.env.comp_mmap_len = session->evlist->mmap_len; err = bpf__apply_obj_config(); if (err) { @@ -1340,7 +1526,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) if (trigger_is_hit(&switch_output_trigger) || done || draining) perf_evlist__toggle_bkw_mmap(rec->evlist, BKW_MMAP_DATA_PENDING); - if (record__mmap_read_all(rec) < 0) { + if (record__mmap_read_all(rec, false) < 0) { trigger_error(&auxtrace_snapshot_trigger); trigger_error(&switch_output_trigger); err = -1; @@ -1441,8 +1627,14 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) record__synthesize_workload(rec, true); out_child: + record__mmap_read_all(rec, true); record__aio_mmap_read_sync(rec); + if (rec->session->bytes_transferred && rec->session->bytes_compressed) { + ratio = (float)rec->session->bytes_transferred/(float)rec->session->bytes_compressed; + session->header.env.comp_ratio = ratio + 0.5; + } + if (forks) { int exit_status; @@ -1489,12 +1681,19 @@ out_child: else samples[0] = '\0'; - fprintf(stderr, "[ perf record: Captured and wrote %.3f MB %s%s%s ]\n", + fprintf(stderr, "[ perf record: Captured and wrote %.3f MB %s%s%s", perf_data__size(data) / 1024.0 / 1024.0, data->path, postfix, samples); + if (ratio) { + fprintf(stderr, ", compressed (original %.3f MB, ratio is %.3f)", + rec->session->bytes_transferred / 1024.0 / 1024.0, + ratio); + } + fprintf(stderr, " ]\n"); } out_delete_session: + zstd_fini(&session->zstd_data); perf_session__delete(session); if (!opts->no_bpf_event) @@ -1846,6 +2045,7 @@ static struct record record = { .uses_mmap = true, .default_per_cpu = true, }, + .mmap_flush = MMAP_FLUSH_DEFAULT, }, .tool = { .sample = process_sample_event, @@ -1912,6 +2112,9 @@ static struct option __record_options[] = { OPT_CALLBACK('m', "mmap-pages", &record.opts, "pages[,pages]", "number of mmap data pages and AUX area tracing mmap pages", record__parse_mmap_pages), + OPT_CALLBACK(0, "mmap-flush", &record.opts, "number", + "Minimal number of bytes that is extracted from mmap data pages (default: 1)", + record__mmap_flush_parse), OPT_BOOLEAN(0, "group", &record.opts.group, "put the counters into a counter group"), OPT_CALLBACK_NOOPT('g', NULL, &callchain_param, @@ -1965,10 +2168,10 @@ static struct option __record_options[] = { "use per-thread mmaps"), OPT_CALLBACK_OPTARG('I', "intr-regs", &record.opts.sample_intr_regs, NULL, "any register", "sample selected machine registers on interrupt," - " use -I ? to list register names", parse_regs), + " use '-I?' to list register names", parse_intr_regs), OPT_CALLBACK_OPTARG(0, "user-regs", &record.opts.sample_user_regs, NULL, "any register", "sample selected machine registers on interrupt," - " use -I ? to list register names", parse_regs), + " use '--user-regs=?' to list register names", parse_user_regs), OPT_BOOLEAN(0, "running-time", &record.opts.running_time, "Record running/enabled time of read (:S) events"), OPT_CALLBACK('k', "clockid", &record.opts, @@ -2016,6 +2219,11 @@ static struct option __record_options[] = { OPT_CALLBACK(0, "affinity", &record.opts, "node|cpu", "Set affinity mask of trace reading thread to NUMA node cpu mask or cpu of processed mmap buffer", record__parse_affinity), +#ifdef HAVE_ZSTD_SUPPORT + OPT_CALLBACK_OPTARG('z', "compression-level", &record.opts, &comp_level_default, + "n", "Compressed records using specified level (default: 1 - fastest compression, 22 - greatest compression)", + record__parse_comp_level), +#endif OPT_END() }; @@ -2075,6 +2283,12 @@ int cmd_record(int argc, const char **argv) "cgroup monitoring only available in system-wide mode"); } + + if (rec->opts.comp_level != 0) { + pr_debug("Compression enabled, disabling build id collection at the end of the session.\n"); + rec->no_buildid = true; + } + if (rec->opts.record_switch_events && !perf_can_record_switch_events()) { ui__error("kernel does not support recording context switch events\n"); @@ -2220,10 +2434,14 @@ int cmd_record(int argc, const char **argv) if (rec->opts.nr_cblocks > nr_cblocks_max) rec->opts.nr_cblocks = nr_cblocks_max; - if (verbose > 0) - pr_info("nr_cblocks: %d\n", rec->opts.nr_cblocks); + pr_debug("nr_cblocks: %d\n", rec->opts.nr_cblocks); pr_debug("affinity: %s\n", affinity_tags[rec->opts.affinity]); + pr_debug("mmap flush: %d\n", rec->opts.mmap_flush); + + if (rec->opts.comp_level > comp_level_max) + rec->opts.comp_level = comp_level_max; + pr_debug("comp level: %d\n", rec->opts.comp_level); err = __cmd_record(&record, argc, argv); out: diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 4054eb1f98ac..1ca533f06a4c 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -136,9 +136,6 @@ static int hist_iter__report_callback(struct hist_entry_iter *iter, if (!ui__has_annotation() && !rep->symbol_ipc) return 0; - hist__account_cycles(sample->branch_stack, al, sample, - rep->nonany_branch_mode); - if (sort__mode == SORT_MODE__BRANCH) { bi = he->branch_info; err = addr_map_symbol__inc_samples(&bi->from, sample, evsel); @@ -181,9 +178,6 @@ static int hist_iter__branch_callback(struct hist_entry_iter *iter, if (!ui__has_annotation() && !rep->symbol_ipc) return 0; - hist__account_cycles(sample->branch_stack, al, sample, - rep->nonany_branch_mode); - bi = he->branch_info; err = addr_map_symbol__inc_samples(&bi->from, sample, evsel); if (err) @@ -282,6 +276,11 @@ static int process_sample_event(struct perf_tool *tool, if (al.map != NULL) al.map->dso->hit = 1; + if (ui__has_annotation() || rep->symbol_ipc) { + hist__account_cycles(sample->branch_stack, &al, sample, + rep->nonany_branch_mode); + } + ret = hist_entry_iter__add(&iter, &al, rep->max_stack, rep); if (ret < 0) pr_debug("problem adding hist entry, skipping event\n"); @@ -1259,6 +1258,9 @@ repeat: if (session == NULL) return -1; + if (zstd_init(&(session->zstd_data), 0) < 0) + pr_warning("Decompression initialization failed. Reported data may be incomplete.\n"); + if (report.queue_size) { ordered_events__set_alloc_size(&session->ordered_events, report.queue_size); @@ -1449,7 +1451,7 @@ repeat: error: if (report.ptime_range) zfree(&report.ptime_range); - + zstd_fini(&(session->zstd_data)); perf_session__delete(session); return ret; } diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 49ee3c2033ec..24b8e690fb69 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -244,11 +244,25 @@ perf_evsel__write_stat_event(struct perf_evsel *counter, u32 cpu, u32 thread, process_synthesized_event, NULL); } +static int read_single_counter(struct perf_evsel *counter, int cpu, + int thread, struct timespec *rs) +{ + if (counter->tool_event == PERF_TOOL_DURATION_TIME) { + u64 val = rs->tv_nsec + rs->tv_sec*1000000000ULL; + struct perf_counts_values *count = + perf_counts(counter->counts, cpu, thread); + count->ena = count->run = val; + count->val = val; + return 0; + } + return perf_evsel__read_counter(counter, cpu, thread); +} + /* * Read out the results of a single counter: * do not aggregate counts across CPUs in system-wide mode */ -static int read_counter(struct perf_evsel *counter) +static int read_counter(struct perf_evsel *counter, struct timespec *rs) { int nthreads = thread_map__nr(evsel_list->threads); int ncpus, cpu, thread; @@ -275,7 +289,7 @@ static int read_counter(struct perf_evsel *counter) * (via perf_evsel__read_counter) and sets threir count->loaded. */ if (!count->loaded && - perf_evsel__read_counter(counter, cpu, thread)) { + read_single_counter(counter, cpu, thread, rs)) { counter->counts->scaled = -1; perf_counts(counter->counts, cpu, thread)->ena = 0; perf_counts(counter->counts, cpu, thread)->run = 0; @@ -304,13 +318,13 @@ static int read_counter(struct perf_evsel *counter) return 0; } -static void read_counters(void) +static void read_counters(struct timespec *rs) { struct perf_evsel *counter; int ret; evlist__for_each_entry(evsel_list, counter) { - ret = read_counter(counter); + ret = read_counter(counter, rs); if (ret) pr_debug("failed to read counter %s\n", counter->name); @@ -323,11 +337,11 @@ static void process_interval(void) { struct timespec ts, rs; - read_counters(); - clock_gettime(CLOCK_MONOTONIC, &ts); diff_timespec(&rs, &ts, &ref_time); + read_counters(&rs); + if (STAT_RECORD) { if (WRITE_STAT_ROUND_EVENT(rs.tv_sec * NSEC_PER_SEC + rs.tv_nsec, INTERVAL)) pr_err("failed to write stat round event\n"); @@ -593,7 +607,7 @@ try_again: * avoid arbitrary skew, we must read all counters before closing any * group leaders. */ - read_counters(); + read_counters(&(struct timespec) { .tv_nsec = t1-t0 }); perf_evlist__close(evsel_list); return WEXITSTATUS(status); @@ -833,6 +847,18 @@ static int perf_stat__get_core_cached(struct perf_stat_config *config, return perf_stat__get_aggr(config, perf_stat__get_core, map, idx); } +static bool term_percore_set(void) +{ + struct perf_evsel *counter; + + evlist__for_each_entry(evsel_list, counter) { + if (counter->percore) + return true; + } + + return false; +} + static int perf_stat_init_aggr_mode(void) { int nr; @@ -853,6 +879,15 @@ static int perf_stat_init_aggr_mode(void) stat_config.aggr_get_id = perf_stat__get_core_cached; break; case AGGR_NONE: + if (term_percore_set()) { + if (cpu_map__build_core_map(evsel_list->cpus, + &stat_config.aggr_map)) { + perror("cannot build core map"); + return -1; + } + stat_config.aggr_get_id = perf_stat__get_core_cached; + } + break; case AGGR_GLOBAL: case AGGR_THREAD: case AGGR_UNSET: @@ -1308,6 +1343,7 @@ static void init_features(struct perf_session *session) for (feat = HEADER_FIRST_FEATURE; feat < HEADER_LAST_FEATURE; feat++) perf_header__set_feat(&session->header, feat); + perf_header__clear_feat(&session->header, HEADER_DIR_FORMAT); perf_header__clear_feat(&session->header, HEADER_BUILD_ID); perf_header__clear_feat(&session->header, HEADER_TRACING_DATA); perf_header__clear_feat(&session->header, HEADER_BRANCH_STACK); diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 1999d6533d12..fbbb0da43abb 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1377,6 +1377,7 @@ int cmd_top(int argc, const char **argv) * */ .overwrite = 0, .sample_time = true, + .sample_time_set = true, }, .max_stack = sysctl__max_stack(), .annotation_opts = annotation__default_options, diff --git a/tools/perf/builtin-version.c b/tools/perf/builtin-version.c index 50df168be326..f470144d1a70 100644 --- a/tools/perf/builtin-version.c +++ b/tools/perf/builtin-version.c @@ -78,6 +78,8 @@ static void library_status(void) STATUS(HAVE_LZMA_SUPPORT, lzma); STATUS(HAVE_AUXTRACE_SUPPORT, get_cpuid); STATUS(HAVE_LIBBPF_SUPPORT, bpf); + STATUS(HAVE_AIO_SUPPORT, aio); + STATUS(HAVE_ZSTD_SUPPORT, zstd); } int cmd_version(int argc, const char **argv) diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c index f9b2161e1ca4..2422894a8194 100644 --- a/tools/perf/examples/bpf/augmented_raw_syscalls.c +++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c @@ -15,6 +15,7 @@ */ #include <unistd.h> +#include <linux/limits.h> #include <pid_filter.h> /* bpf-output associated map */ @@ -41,32 +42,110 @@ struct syscall_exit_args { struct augmented_filename { unsigned int size; int reserved; - char value[256]; + char value[PATH_MAX]; }; -#define SYS_OPEN 2 -#define SYS_ACCESS 21 -#define SYS_OPENAT 257 +/* syscalls where the first arg is a string */ +#define SYS_OPEN 2 +#define SYS_STAT 4 +#define SYS_LSTAT 6 +#define SYS_ACCESS 21 +#define SYS_EXECVE 59 +#define SYS_TRUNCATE 76 +#define SYS_CHDIR 80 +#define SYS_RENAME 82 +#define SYS_MKDIR 83 +#define SYS_RMDIR 84 +#define SYS_CREAT 85 +#define SYS_LINK 86 +#define SYS_UNLINK 87 +#define SYS_SYMLINK 88 +#define SYS_READLINK 89 +#define SYS_CHMOD 90 +#define SYS_CHOWN 92 +#define SYS_LCHOWN 94 +#define SYS_MKNOD 133 +#define SYS_STATFS 137 +#define SYS_PIVOT_ROOT 155 +#define SYS_CHROOT 161 +#define SYS_ACCT 163 +#define SYS_SWAPON 167 +#define SYS_SWAPOFF 168 +#define SYS_DELETE_MODULE 176 +#define SYS_SETXATTR 188 +#define SYS_LSETXATTR 189 +#define SYS_GETXATTR 191 +#define SYS_LGETXATTR 192 +#define SYS_LISTXATTR 194 +#define SYS_LLISTXATTR 195 +#define SYS_REMOVEXATTR 197 +#define SYS_LREMOVEXATTR 198 +#define SYS_MQ_OPEN 240 +#define SYS_MQ_UNLINK 241 +#define SYS_ADD_KEY 248 +#define SYS_REQUEST_KEY 249 +#define SYS_SYMLINKAT 266 +#define SYS_MEMFD_CREATE 319 + +/* syscalls where the first arg is a string */ + +#define SYS_PWRITE64 18 +#define SYS_EXECVE 59 +#define SYS_RENAME 82 +#define SYS_QUOTACTL 179 +#define SYS_FSETXATTR 190 +#define SYS_FGETXATTR 193 +#define SYS_FREMOVEXATTR 199 +#define SYS_MQ_TIMEDSEND 242 +#define SYS_REQUEST_KEY 249 +#define SYS_INOTIFY_ADD_WATCH 254 +#define SYS_OPENAT 257 +#define SYS_MKDIRAT 258 +#define SYS_MKNODAT 259 +#define SYS_FCHOWNAT 260 +#define SYS_FUTIMESAT 261 +#define SYS_NEWFSTATAT 262 +#define SYS_UNLINKAT 263 +#define SYS_RENAMEAT 264 +#define SYS_LINKAT 265 +#define SYS_READLINKAT 267 +#define SYS_FCHMODAT 268 +#define SYS_FACCESSAT 269 +#define SYS_UTIMENSAT 280 +#define SYS_NAME_TO_HANDLE_AT 303 +#define SYS_FINIT_MODULE 313 +#define SYS_RENAMEAT2 316 +#define SYS_EXECVEAT 322 +#define SYS_STATX 332 pid_filter(pids_filtered); +struct augmented_args_filename { + struct syscall_enter_args args; + struct augmented_filename filename; +}; + +bpf_map(augmented_filename_map, PERCPU_ARRAY, int, struct augmented_args_filename, 1); + SEC("raw_syscalls:sys_enter") int sys_enter(struct syscall_enter_args *args) { - struct { - struct syscall_enter_args args; - struct augmented_filename filename; - } augmented_args; - struct syscall *syscall; - unsigned int len = sizeof(augmented_args); + struct augmented_args_filename *augmented_args; + unsigned int len = sizeof(*augmented_args); const void *filename_arg = NULL; + struct syscall *syscall; + int key = 0; + + augmented_args = bpf_map_lookup_elem(&augmented_filename_map, &key); + if (augmented_args == NULL) + return 1; if (pid_filter__has(&pids_filtered, getpid())) return 0; - probe_read(&augmented_args.args, sizeof(augmented_args.args), args); + probe_read(&augmented_args->args, sizeof(augmented_args->args), args); - syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr); + syscall = bpf_map_lookup_elem(&syscalls, &augmented_args->args.syscall_nr); if (syscall == NULL || !syscall->enabled) return 0; /* @@ -109,30 +188,105 @@ int sys_enter(struct syscall_enter_args *args) * * after the ctx memory access to prevent their down stream merging. */ - switch (augmented_args.args.syscall_nr) { + /* + * This table of what args are strings will be provided by userspace, + * in the syscalls map, i.e. we will already have to do the lookup to + * see if this specific syscall is filtered, so we can as well get more + * info about what syscall args are strings or pointers, and how many + * bytes to copy, per arg, etc. + * + * For now hard code it, till we have all the basic mechanisms in place + * to automate everything and make the kernel part be completely driven + * by information obtained in userspace for each kernel version and + * processor architecture, making the kernel part the same no matter what + * kernel version or processor architecture it runs on. + */ + switch (augmented_args->args.syscall_nr) { + case SYS_ACCT: + case SYS_ADD_KEY: + case SYS_CHDIR: + case SYS_CHMOD: + case SYS_CHOWN: + case SYS_CHROOT: + case SYS_CREAT: + case SYS_DELETE_MODULE: + case SYS_EXECVE: + case SYS_GETXATTR: + case SYS_LCHOWN: + case SYS_LGETXATTR: + case SYS_LINK: + case SYS_LISTXATTR: + case SYS_LLISTXATTR: + case SYS_LREMOVEXATTR: + case SYS_LSETXATTR: + case SYS_LSTAT: + case SYS_MEMFD_CREATE: + case SYS_MKDIR: + case SYS_MKNOD: + case SYS_MQ_OPEN: + case SYS_MQ_UNLINK: + case SYS_PIVOT_ROOT: + case SYS_READLINK: + case SYS_REMOVEXATTR: + case SYS_RENAME: + case SYS_REQUEST_KEY: + case SYS_RMDIR: + case SYS_SETXATTR: + case SYS_STAT: + case SYS_STATFS: + case SYS_SWAPOFF: + case SYS_SWAPON: + case SYS_SYMLINK: + case SYS_SYMLINKAT: + case SYS_TRUNCATE: + case SYS_UNLINK: case SYS_ACCESS: case SYS_OPEN: filename_arg = (const void *)args->args[0]; __asm__ __volatile__("": : :"memory"); break; + case SYS_EXECVEAT: + case SYS_FACCESSAT: + case SYS_FCHMODAT: + case SYS_FCHOWNAT: + case SYS_FGETXATTR: + case SYS_FINIT_MODULE: + case SYS_FREMOVEXATTR: + case SYS_FSETXATTR: + case SYS_FUTIMESAT: + case SYS_INOTIFY_ADD_WATCH: + case SYS_LINKAT: + case SYS_MKDIRAT: + case SYS_MKNODAT: + case SYS_MQ_TIMEDSEND: + case SYS_NAME_TO_HANDLE_AT: + case SYS_NEWFSTATAT: + case SYS_PWRITE64: + case SYS_QUOTACTL: + case SYS_READLINKAT: + case SYS_RENAMEAT: + case SYS_RENAMEAT2: + case SYS_STATX: + case SYS_UNLINKAT: + case SYS_UTIMENSAT: case SYS_OPENAT: filename_arg = (const void *)args->args[1]; break; } if (filename_arg != NULL) { - augmented_args.filename.reserved = 0; - augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, - sizeof(augmented_args.filename.value), + augmented_args->filename.reserved = 0; + augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, + sizeof(augmented_args->filename.value), filename_arg); - if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) { - len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size; - len &= sizeof(augmented_args.filename.value) - 1; + if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { + len -= sizeof(augmented_args->filename.value) - augmented_args->filename.size; + len &= sizeof(augmented_args->filename.value) - 1; } } else { - len = sizeof(augmented_args.args); + len = sizeof(augmented_args->args); } /* If perf_event_output fails, return non-zero so that it gets recorded unaugmented */ - return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len); + return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, augmented_args, len); } SEC("raw_syscalls:sys_exit") diff --git a/tools/perf/perf.h b/tools/perf/perf.h index c59743def8d3..d59dee61b64d 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -85,6 +85,8 @@ struct record_opts { u64 clockid_res_ns; int nr_cblocks; int affinity; + int mmap_flush; + unsigned int comp_level; }; enum perf_affinity { diff --git a/tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json b/tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json new file mode 100644 index 000000000000..0ac9b7927450 --- /dev/null +++ b/tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json @@ -0,0 +1,179 @@ +[ + { + "ArchStdEvent": "L1D_CACHE_RD", + }, + { + "ArchStdEvent": "L1D_CACHE_WR", + }, + { + "ArchStdEvent": "L1D_CACHE_REFILL_RD", + }, + { + "ArchStdEvent": "L1D_CACHE_REFILL_WR", + }, + { + "ArchStdEvent": "L1D_CACHE_WB_VICTIM", + }, + { + "ArchStdEvent": "L1D_CACHE_WB_CLEAN", + }, + { + "ArchStdEvent": "L1D_CACHE_INVAL", + }, + { + "ArchStdEvent": "L1D_TLB_REFILL_RD", + }, + { + "ArchStdEvent": "L1D_TLB_REFILL_WR", + }, + { + "ArchStdEvent": "L2D_CACHE_RD", + }, + { + "ArchStdEvent": "L2D_CACHE_WR", + }, + { + "ArchStdEvent": "L2D_CACHE_REFILL_RD", + }, + { + "ArchStdEvent": "L2D_CACHE_REFILL_WR", + }, + { + "ArchStdEvent": "L2D_CACHE_WB_VICTIM", + }, + { + "ArchStdEvent": "L2D_CACHE_WB_CLEAN", + }, + { + "ArchStdEvent": "L2D_CACHE_INVAL", + }, + { + "ArchStdEvent": "BUS_ACCESS_RD", + }, + { + "ArchStdEvent": "BUS_ACCESS_WR", + }, + { + "ArchStdEvent": "BUS_ACCESS_SHARED", + }, + { + "ArchStdEvent": "BUS_ACCESS_NOT_SHARED", + }, + { + "ArchStdEvent": "BUS_ACCESS_NORMAL", + }, + { + "ArchStdEvent": "BUS_ACCESS_PERIPH", + }, + { + "ArchStdEvent": "MEM_ACCESS_RD", + }, + { + "ArchStdEvent": "MEM_ACCESS_WR", + }, + { + "ArchStdEvent": "UNALIGNED_LD_SPEC", + }, + { + "ArchStdEvent": "UNALIGNED_ST_SPEC", + }, + { + "ArchStdEvent": "UNALIGNED_LDST_SPEC", + }, + { + "ArchStdEvent": "LDREX_SPEC", + }, + { + "ArchStdEvent": "STREX_PASS_SPEC", + }, + { + "ArchStdEvent": "STREX_FAIL_SPEC", + }, + { + "ArchStdEvent": "LD_SPEC", + }, + { + "ArchStdEvent": "ST_SPEC", + }, + { + "ArchStdEvent": "LDST_SPEC", + }, + { + "ArchStdEvent": "DP_SPEC", + }, + { + "ArchStdEvent": "ASE_SPEC", + }, + { + "ArchStdEvent": "VFP_SPEC", + }, + { + "ArchStdEvent": "PC_WRITE_SPEC", + }, + { + "ArchStdEvent": "CRYPTO_SPEC", + }, + { + "ArchStdEvent": "BR_IMMED_SPEC", + }, + { + "ArchStdEvent": "BR_RETURN_SPEC", + }, + { + "ArchStdEvent": "BR_INDIRECT_SPEC", + }, + { + "ArchStdEvent": "ISB_SPEC", + }, + { + "ArchStdEvent": "DSB_SPEC", + }, + { + "ArchStdEvent": "DMB_SPEC", + }, + { + "ArchStdEvent": "EXC_UNDEF", + }, + { + "ArchStdEvent": "EXC_SVC", + }, + { + "ArchStdEvent": "EXC_PABORT", + }, + { + "ArchStdEvent": "EXC_DABORT", + }, + { + "ArchStdEvent": "EXC_IRQ", + }, + { + "ArchStdEvent": "EXC_FIQ", + }, + { + "ArchStdEvent": "EXC_SMC", + }, + { + "ArchStdEvent": "EXC_HVC", + }, + { + "ArchStdEvent": "EXC_TRAP_PABORT", + }, + { + "ArchStdEvent": "EXC_TRAP_DABORT", + }, + { + "ArchStdEvent": "EXC_TRAP_OTHER", + }, + { + "ArchStdEvent": "EXC_TRAP_IRQ", + }, + { + "ArchStdEvent": "EXC_TRAP_FIQ", + }, + { + "ArchStdEvent": "RC_LD_SPEC", + }, + { + "ArchStdEvent": "RC_ST_SPEC", + }, +] diff --git a/tools/perf/pmu-events/arch/arm64/mapfile.csv b/tools/perf/pmu-events/arch/arm64/mapfile.csv index 59cd8604b0bd..927fcddcb4aa 100644 --- a/tools/perf/pmu-events/arch/arm64/mapfile.csv +++ b/tools/perf/pmu-events/arch/arm64/mapfile.csv @@ -12,7 +12,10 @@ # # #Family-model,Version,Filename,EventType -0x00000000410fd03[[:xdigit:]],v1,arm/cortex-a53,core +0x00000000410fd030,v1,arm/cortex-a53,core +0x00000000420f1000,v1,arm/cortex-a53,core +0x00000000410fd070,v1,arm/cortex-a57-a72,core +0x00000000410fd080,v1,arm/cortex-a57-a72,core 0x00000000420f5160,v1,cavium/thunderx2,core 0x00000000430f0af0,v1,cavium/thunderx2,core 0x00000000480fd010,v1,hisilicon/hip08,core diff --git a/tools/perf/pmu-events/arch/s390/cf_z14/extended.json b/tools/perf/pmu-events/arch/s390/cf_z14/extended.json index e7a3524b748f..68618152ea2c 100644 --- a/tools/perf/pmu-events/arch/s390/cf_z14/extended.json +++ b/tools/perf/pmu-events/arch/s390/cf_z14/extended.json @@ -4,7 +4,7 @@ "EventCode": "128", "EventName": "L1D_RO_EXCL_WRITES", "BriefDescription": "L1D Read-only Exclusive Writes", - "PublicDescription": "Counter:128 Name:L1D_RO_EXCL_WRITES A directory write to the Level-1 Data cache where the line was originally in a Read-Only state in the cache but has been updated to be in the Exclusive state that allows stores to the cache line" + "PublicDescription": "L1D_RO_EXCL_WRITES A directory write to the Level-1 Data cache where the line was originally in a Read-Only state in the cache but has been updated to be in the Exclusive state that allows stores to the cache line" }, { "Unit": "CPU-M-CF", diff --git a/tools/perf/pmu-events/arch/x86/bonnell/frontend.json b/tools/perf/pmu-events/arch/x86/bonnell/frontend.json index 935b7dcf067d..ef69540ab61d 100644 --- a/tools/perf/pmu-events/arch/x86/bonnell/frontend.json +++ b/tools/perf/pmu-events/arch/x86/bonnell/frontend.json @@ -77,7 +77,7 @@ "UMask": "0x1", "EventName": "UOPS.MS_CYCLES", "SampleAfterValue": "2000000", - "BriefDescription": "This event counts the cycles where 1 or more uops are issued by the micro-sequencer (MS), including microcode assists and inserted flows, and written to the IQ. ", + "BriefDescription": "This event counts the cycles where 1 or more uops are issued by the micro-sequencer (MS), including microcode assists and inserted flows, and written to the IQ.", "CounterMask": "1" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/bonnell/pipeline.json b/tools/perf/pmu-events/arch/x86/bonnell/pipeline.json index b2e681c78466..09c6de13de20 100644 --- a/tools/perf/pmu-events/arch/x86/bonnell/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/bonnell/pipeline.json @@ -189,7 +189,7 @@ "UMask": "0x8", "EventName": "BR_MISSP_TYPE_RETIRED.IND_CALL", "SampleAfterValue": "200000", - "BriefDescription": "Mispredicted indirect calls, including both register and memory indirect. " + "BriefDescription": "Mispredicted indirect calls, including both register and memory indirect." }, { "EventCode": "0x89", diff --git a/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json b/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json index 00bfdb5c5acb..212b117a8ffb 100644 --- a/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json +++ b/tools/perf/pmu-events/arch/x86/broadwell/bdw-metrics.json @@ -1,164 +1,352 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { "MetricExpr": "min( 1 , IDQ.MITE_UOPS / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )", - "MetricGroup": "Frontend", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE.IFDATA_STALL - (( 14 * ITLB_MISSES.STLB_HIT + cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + 7* ITLB_MISSES.WALK_COMPLETED )) ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) * (12 * ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT + BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "Branch_Misprediction_Cost" }, { + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (12 * ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT + BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts_SMT", + "MetricName": "Branch_Misprediction_Cost_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" + }, + { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( cpu@l1d_pend_miss.pending_cycles\\,any\\=1@ / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_LOAD_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_STORE_MISSES.WALK_DURATION\\,cmask\\=1@ + 7 * ( DTLB_STORE_MISSES.WALK_COMPLETED + DTLB_LOAD_MISSES.WALK_COMPLETED + ITLB_MISSES.WALK_COMPLETED ) ) / cycles", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_LOAD_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_STORE_MISSES.WALK_DURATION\\,cmask\\=1@ + 7*(DTLB_STORE_MISSES.WALK_COMPLETED+DTLB_LOAD_MISSES.WALK_COMPLETED+ITLB_MISSES.WALK_COMPLETED)) / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_LOAD_MISSES.WALK_DURATION\\,cmask\\=1@ + cpu@DTLB_STORE_MISSES.WALK_DURATION\\,cmask\\=1@ + 7 * ( DTLB_STORE_MISSES.WALK_COMPLETED + DTLB_LOAD_MISSES.WALK_COMPLETED + ITLB_MISSES.WALK_COMPLETED ) ) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L3_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2* FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4*( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8* FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/broadwell/cache.json b/tools/perf/pmu-events/arch/x86/broadwell/cache.json index 0b080b0352d8..7938bf5689ab 100644 --- a/tools/perf/pmu-events/arch/x86/broadwell/cache.json +++ b/tools/perf/pmu-events/arch/x86/broadwell/cache.json @@ -56,10 +56,10 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of demand Data Read requests that hit L2 cache. Only not rejected loads are counted.", + "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache.", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x41", + "UMask": "0xc1", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "SampleAfterValue": "200003", "BriefDescription": "Demand Data Read requests that hit L2 cache", @@ -68,7 +68,7 @@ { "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x42", + "UMask": "0xc2", "EventName": "L2_RQSTS.RFO_HIT", "SampleAfterValue": "200003", "BriefDescription": "RFO requests that hit L2 cache.", @@ -77,7 +77,7 @@ { "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x44", + "UMask": "0xc4", "EventName": "L2_RQSTS.CODE_RD_HIT", "SampleAfterValue": "200003", "BriefDescription": "L2 cache hits when fetching instructions, code reads.", @@ -87,7 +87,7 @@ "PublicDescription": "This event counts the number of requests from the L2 hardware prefetchers that hit L2 cache. L3 prefetch new types.", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x50", + "UMask": "0xd0", "EventName": "L2_RQSTS.L2_PF_HIT", "SampleAfterValue": "200003", "BriefDescription": "L2 prefetch requests that hit L2 cache", @@ -433,7 +433,7 @@ }, { "PEBS": "1", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "EventCode": "0xD0", "Counter": "0,1,2,3", "UMask": "0x41", @@ -445,7 +445,7 @@ }, { "PEBS": "1", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "EventCode": "0xD0", "Counter": "0,1,2,3", "UMask": "0x42", @@ -771,2628 +771,2628 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts demand data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010001 ", + "MSRValue": "0x0000010001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that have any response type.", + "BriefDescription": "Counts demand data reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020001 ", + "MSRValue": "0x0080020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020001 ", + "MSRValue": "0x0100020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020001 ", + "MSRValue": "0x0200020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020001 ", + "MSRValue": "0x0400020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020001 ", + "MSRValue": "0x1000020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020001 ", + "MSRValue": "0x3F80020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0001 ", + "MSRValue": "0x00803C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0001 ", + "MSRValue": "0x01003C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0001 ", + "MSRValue": "0x02003C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0001 ", + "MSRValue": "0x04003C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0001 ", + "MSRValue": "0x10003C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0001 ", + "MSRValue": "0x3F803C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010002 ", + "MSRValue": "0x0000010002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that have any response type.", + "BriefDescription": "Counts all demand data writes (RFOs) have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0002 ", + "MSRValue": "0x00803C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0002 ", + "MSRValue": "0x01003C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0002 ", + "MSRValue": "0x02003C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0002 ", + "MSRValue": "0x04003C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0002 ", + "MSRValue": "0x10003C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_RFO & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0002 ", + "MSRValue": "0x3F803C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010004 ", + "MSRValue": "0x0000010004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that have any response type.", + "BriefDescription": "Counts all demand code reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020004 ", + "MSRValue": "0x0080020004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020004 ", + "MSRValue": "0x0100020004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020004 ", + "MSRValue": "0x0200020004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020004 ", + "MSRValue": "0x0400020004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020004 ", + "MSRValue": "0x1000020004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020004 ", + "MSRValue": "0x3F80020004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0004 ", + "MSRValue": "0x00803C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0004 ", + "MSRValue": "0x01003C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0004 ", + "MSRValue": "0x02003C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0004 ", + "MSRValue": "0x04003C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0004 ", + "MSRValue": "0x10003C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0004 ", + "MSRValue": "0x3F803C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive) have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010008 ", + "MSRValue": "0x0000010008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that have any response type.", + "BriefDescription": "Counts writebacks (modified to exclusive) have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020008 ", + "MSRValue": "0x0080020008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020008 ", + "MSRValue": "0x0100020008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020008 ", + "MSRValue": "0x0200020008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020008 ", + "MSRValue": "0x0400020008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020008 ", + "MSRValue": "0x1000020008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020008 ", + "MSRValue": "0x3F80020008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0008 ", + "MSRValue": "0x00803C0008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0008 ", + "MSRValue": "0x01003C0008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0008 ", + "MSRValue": "0x02003C0008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0008 ", + "MSRValue": "0x04003C0008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0008 ", + "MSRValue": "0x10003C0008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0008 ", + "MSRValue": "0x3F803C0008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010010 ", + "MSRValue": "0x0000010010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020010 ", + "MSRValue": "0x0080020010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020010 ", + "MSRValue": "0x0100020010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020010 ", + "MSRValue": "0x0200020010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020010 ", + "MSRValue": "0x0400020010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020010 ", + "MSRValue": "0x1000020010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020010 ", + "MSRValue": "0x3F80020010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0010 ", + "MSRValue": "0x00803C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0010 ", + "MSRValue": "0x01003C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0010 ", + "MSRValue": "0x02003C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0010 ", + "MSRValue": "0x04003C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0010 ", + "MSRValue": "0x10003C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0010 ", + "MSRValue": "0x3F803C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010020 ", + "MSRValue": "0x0000010020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020020 ", + "MSRValue": "0x0080020020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020020 ", + "MSRValue": "0x0100020020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020020 ", + "MSRValue": "0x0200020020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020020 ", + "MSRValue": "0x0400020020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020020 ", + "MSRValue": "0x1000020020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020020 ", + "MSRValue": "0x3F80020020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0020 ", + "MSRValue": "0x00803C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0020 ", + "MSRValue": "0x01003C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0020 ", + "MSRValue": "0x02003C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0020 ", + "MSRValue": "0x04003C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0020 ", + "MSRValue": "0x10003C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0020 ", + "MSRValue": "0x3F803C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010040 ", + "MSRValue": "0x0000010040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that have any response type.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020040 ", + "MSRValue": "0x0080020040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020040 ", + "MSRValue": "0x0100020040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020040 ", + "MSRValue": "0x0200020040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020040 ", + "MSRValue": "0x0400020040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020040 ", + "MSRValue": "0x1000020040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020040 ", + "MSRValue": "0x3F80020040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0040 ", + "MSRValue": "0x00803C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0040 ", + "MSRValue": "0x01003C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0040 ", + "MSRValue": "0x02003C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0040 ", + "MSRValue": "0x04003C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0040 ", + "MSRValue": "0x10003C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0040 ", + "MSRValue": "0x3F803C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010080 ", + "MSRValue": "0x0000010080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020080 ", + "MSRValue": "0x0080020080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020080 ", + "MSRValue": "0x0100020080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020080 ", + "MSRValue": "0x0200020080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020080 ", + "MSRValue": "0x0400020080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020080 ", + "MSRValue": "0x1000020080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020080 ", + "MSRValue": "0x3F80020080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0080 ", + "MSRValue": "0x00803C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0080 ", + "MSRValue": "0x01003C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0080 ", + "MSRValue": "0x02003C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0080 ", + "MSRValue": "0x04003C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0080 ", + "MSRValue": "0x10003C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0080 ", + "MSRValue": "0x3F803C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010100 ", + "MSRValue": "0x0000010100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020100 ", + "MSRValue": "0x0080020100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020100 ", + "MSRValue": "0x0100020100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020100 ", + "MSRValue": "0x0200020100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020100 ", + "MSRValue": "0x0400020100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020100 ", + "MSRValue": "0x1000020100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020100 ", + "MSRValue": "0x3F80020100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0100 ", + "MSRValue": "0x00803C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0100 ", + "MSRValue": "0x01003C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0100 ", + "MSRValue": "0x02003C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0100 ", + "MSRValue": "0x04003C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0100 ", + "MSRValue": "0x10003C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0100 ", + "MSRValue": "0x3F803C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010200 ", + "MSRValue": "0x0000010200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that have any response type.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020200 ", + "MSRValue": "0x0080020200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020200 ", + "MSRValue": "0x0100020200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020200 ", + "MSRValue": "0x0200020200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020200 ", + "MSRValue": "0x0400020200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020200 ", + "MSRValue": "0x1000020200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020200 ", + "MSRValue": "0x3F80020200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0200 ", + "MSRValue": "0x00803C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0200 ", + "MSRValue": "0x01003C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0200 ", + "MSRValue": "0x02003C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0200 ", + "MSRValue": "0x04003C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0200 ", + "MSRValue": "0x10003C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0200 ", + "MSRValue": "0x3F803C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000018000 ", + "MSRValue": "0x0000018000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that have any response type.", + "BriefDescription": "Counts any other requests have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080028000 ", + "MSRValue": "0x0080028000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100028000 ", + "MSRValue": "0x0100028000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200028000 ", + "MSRValue": "0x0200028000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400028000 ", + "MSRValue": "0x0400028000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000028000 ", + "MSRValue": "0x1000028000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80028000 ", + "MSRValue": "0x3F80028000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c8000 ", + "MSRValue": "0x00803C8000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c8000 ", + "MSRValue": "0x01003C8000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c8000 ", + "MSRValue": "0x02003C8000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c8000 ", + "MSRValue": "0x04003C8000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c8000 ", + "MSRValue": "0x10003C8000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c8000 ", + "MSRValue": "0x3F803C8000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that hit in the L3.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010090 ", + "MSRValue": "0x0000010090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that have any response type.", + "BriefDescription": "Counts all prefetch data reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020090 ", + "MSRValue": "0x0080020090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020090 ", + "MSRValue": "0x0100020090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020090 ", + "MSRValue": "0x0200020090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020090 ", + "MSRValue": "0x0400020090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020090 ", + "MSRValue": "0x1000020090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020090 ", + "MSRValue": "0x3F80020090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0090 ", + "MSRValue": "0x00803C0090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0090 ", + "MSRValue": "0x01003C0090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0090 ", + "MSRValue": "0x02003C0090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0090 ", + "MSRValue": "0x04003C0090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0090 ", + "MSRValue": "0x10003C0090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0090 ", + "MSRValue": "0x3F803C0090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that hit in the L3.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010120 ", + "MSRValue": "0x0000010120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that have any response type.", + "BriefDescription": "Counts prefetch RFOs have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020120 ", + "MSRValue": "0x0080020120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020120 ", + "MSRValue": "0x0100020120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020120 ", + "MSRValue": "0x0200020120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020120 ", + "MSRValue": "0x0400020120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020120 ", + "MSRValue": "0x1000020120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020120 ", + "MSRValue": "0x3F80020120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0120 ", + "MSRValue": "0x00803C0120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0120 ", + "MSRValue": "0x01003C0120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0120 ", + "MSRValue": "0x02003C0120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0120 ", + "MSRValue": "0x04003C0120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0120 ", + "MSRValue": "0x10003C0120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0120 ", + "MSRValue": "0x3F803C0120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that hit in the L3.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010240 ", + "MSRValue": "0x0000010240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that have any response type.", + "BriefDescription": "Counts all prefetch code reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020240 ", + "MSRValue": "0x0080020240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020240 ", + "MSRValue": "0x0100020240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020240 ", + "MSRValue": "0x0200020240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020240 ", + "MSRValue": "0x0400020240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020240 ", + "MSRValue": "0x1000020240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020240 ", + "MSRValue": "0x3F80020240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0240 ", + "MSRValue": "0x00803C0240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0240 ", + "MSRValue": "0x01003C0240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0240 ", + "MSRValue": "0x02003C0240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0240 ", + "MSRValue": "0x04003C0240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0240 ", + "MSRValue": "0x10003C0240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0240 ", + "MSRValue": "0x3F803C0240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that hit in the L3.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010091 ", + "MSRValue": "0x0000010091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that have any response type.", + "BriefDescription": "Counts all demand & prefetch data reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020091 ", + "MSRValue": "0x0080020091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020091 ", + "MSRValue": "0x0100020091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020091 ", + "MSRValue": "0x0200020091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020091 ", + "MSRValue": "0x0400020091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020091 ", + "MSRValue": "0x1000020091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020091 ", + "MSRValue": "0x3F80020091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0091 ", + "MSRValue": "0x00803C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0091 ", + "MSRValue": "0x01003C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0091 ", + "MSRValue": "0x02003C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0091 ", + "MSRValue": "0x04003C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0091 ", + "MSRValue": "0x10003C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0091 ", + "MSRValue": "0x3F803C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010122 ", + "MSRValue": "0x0000010122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that have any response type.", + "BriefDescription": "Counts all demand & prefetch RFOs have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020122 ", + "MSRValue": "0x0080020122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020122 ", + "MSRValue": "0x0100020122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020122 ", + "MSRValue": "0x0200020122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020122 ", + "MSRValue": "0x0400020122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020122 ", + "MSRValue": "0x1000020122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f80020122 ", + "MSRValue": "0x3F80020122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00803c0122 ", + "MSRValue": "0x00803C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01003c0122 ", + "MSRValue": "0x01003C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02003c0122 ", + "MSRValue": "0x02003C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0122 ", + "MSRValue": "0x04003C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0122 ", + "MSRValue": "0x10003C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0122 ", + "MSRValue": "0x3F803C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/broadwell/floating-point.json b/tools/perf/pmu-events/arch/x86/broadwell/floating-point.json index 689d478dae93..15291239c128 100644 --- a/tools/perf/pmu-events/arch/x86/broadwell/floating-point.json +++ b/tools/perf/pmu-events/arch/x86/broadwell/floating-point.json @@ -1,24 +1,26 @@ [ { - "PublicDescription": "This event counts the number of transitions from AVX-256 to legacy SSE when penalty is applicable.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts the number of transitions from AVX-256 to legacy SSE when penalty is applicable.", "EventCode": "0xC1", "Counter": "0,1,2,3", "UMask": "0x8", "Errata": "BDM30", "EventName": "OTHER_ASSISTS.AVX_TO_SSE", "SampleAfterValue": "100003", - "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", + "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable (Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of transitions from legacy SSE to AVX-256 when penalty is applicable.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts the number of transitions from legacy SSE to AVX-256 when penalty is applicable.", "EventCode": "0xC1", "Counter": "0,1,2,3", "UMask": "0x10", "Errata": "BDM30", "EventName": "OTHER_ASSISTS.SSE_TO_AVX", "SampleAfterValue": "100003", - "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", + "BriefDescription": "Number of transitions from legacy SSE to AVX-256 when penalty applicable (Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -45,7 +47,7 @@ "UMask": "0x3", "EventName": "FP_ARITH_INST_RETIRED.SCALAR", "SampleAfterValue": "2000003", - "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single precision?)", "CounterHTOff": "0,1,2,3" }, { @@ -54,7 +56,7 @@ "UMask": "0x4", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", "SampleAfterValue": "2000003", - "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired. Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired. Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "CounterHTOff": "0,1,2,3" }, { @@ -63,7 +65,7 @@ "UMask": "0x8", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", "SampleAfterValue": "2000003", - "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "CounterHTOff": "0,1,2,3" }, { @@ -72,7 +74,7 @@ "UMask": "0x10", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", "SampleAfterValue": "2000003", - "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "CounterHTOff": "0,1,2,3" }, { @@ -81,7 +83,7 @@ "UMask": "0x15", "EventName": "FP_ARITH_INST_RETIRED.DOUBLE", "SampleAfterValue": "2000006", - "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.", + "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "CounterHTOff": "0,1,2,3" }, { @@ -90,7 +92,7 @@ "UMask": "0x20", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", "SampleAfterValue": "2000003", - "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired. Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired. Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "CounterHTOff": "0,1,2,3" }, { @@ -99,7 +101,7 @@ "UMask": "0x2a", "EventName": "FP_ARITH_INST_RETIRED.SINGLE", "SampleAfterValue": "2000005", - "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.", + "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "CounterHTOff": "0,1,2,3" }, { @@ -108,57 +110,62 @@ "UMask": "0x3c", "EventName": "FP_ARITH_INST_RETIRED.PACKED", "SampleAfterValue": "2000004", - "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single-precision?)", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "This event counts the number of x87 floating point (FP) micro-code assist (numeric overflow/underflow, inexact result) when the output value (destination register) is invalid.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts the number of x87 floating point (FP) micro-code assist (numeric overflow/underflow, inexact result) when the output value (destination register) is invalid.", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x2", "EventName": "FP_ASSIST.X87_OUTPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of X87 assists due to output value.", + "BriefDescription": "output - Numeric Overflow, Numeric Underflow, Inexact Result (Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts x87 floating point (FP) micro-code assist (invalid operation, denormal operand, SNaN operand) when the input value (one of the source operands to an FP instruction) is invalid.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts x87 floating point (FP) micro-code assist (invalid operation, denormal operand, SNaN operand) when the input value (one of the source operands to an FP instruction) is invalid.", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x4", "EventName": "FP_ASSIST.X87_INPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of X87 assists due to input value.", + "BriefDescription": "input - Invalid Operation, Denormal Operand, SNaN Operand (Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of SSE* floating point (FP) micro-code assist (numeric overflow/underflow) when the output value (destination register) is invalid. Counting covers only cases involving penalties that require micro-code assist intervention.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts the number of SSE* floating point (FP) micro-code assist (numeric overflow/underflow) when the output value (destination register) is invalid. Counting covers only cases involving penalties that require micro-code assist intervention.", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x8", "EventName": "FP_ASSIST.SIMD_OUTPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of SIMD FP assists due to Output values", + "BriefDescription": "SSE* FP micro-code assist when output value is invalid. (Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts any input SSE* FP assist - invalid operation, denormal operand, dividing by zero, SNaN operand. Counting includes only cases involving penalties that required micro-code assist intervention.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts any input SSE* floating-point (FP) assist - invalid operation, denormal operand, dividing by zero, SNaN operand. Counting includes only cases involving penalties that required micro-code assist intervention.", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x10", "EventName": "FP_ASSIST.SIMD_INPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of SIMD FP assists due to input values", + "BriefDescription": "Any input SSE* FP Assist - (Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts cycles with any input and output SSE or x87 FP assist. If an input and output assist are detected on the same cycle the event increments by 1.", + "PEBS": "1", + "PublicDescription": "This event counts cycles with any input and output SSE or x87 FP assist. If an input and output assist are detected on the same cycle the event increments by 1. Uses PEBS.", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x1e", "EventName": "FP_ASSIST.ANY", "SampleAfterValue": "100003", - "BriefDescription": "Cycles with any input/output SSE or FP assist", + "BriefDescription": "Counts any FP_ASSIST umask was incrementing (Precise Event)", "CounterMask": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/broadwell/frontend.json b/tools/perf/pmu-events/arch/x86/broadwell/frontend.json index 7142c76d7f11..aa4a5d762f21 100644 --- a/tools/perf/pmu-events/arch/x86/broadwell/frontend.json +++ b/tools/perf/pmu-events/arch/x86/broadwell/frontend.json @@ -211,7 +211,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4 x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when:\n a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread;\n b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions); \n c. Instruction Decode Queue (IDQ) delivers four uops.", + "PublicDescription": "This event counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding \u201c4 \u2013 x\u201d when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when:\n a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread;\n b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions); \n c. Instruction Decode Queue (IDQ) delivers four uops.", "EventCode": "0x9C", "Counter": "0,1,2,3", "UMask": "0x1", @@ -274,7 +274,7 @@ "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "This event counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. \nMM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.\nPenalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.", + "PublicDescription": "This event counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. \nMM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.\nPenalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 0\u20132 cycles.", "EventCode": "0xAB", "Counter": "0,1,2,3", "UMask": "0x2", diff --git a/tools/perf/pmu-events/arch/x86/broadwell/memory.json b/tools/perf/pmu-events/arch/x86/broadwell/memory.json index c9154cebbdf0..b6b5247d3d5a 100644 --- a/tools/perf/pmu-events/arch/x86/broadwell/memory.json +++ b/tools/perf/pmu-events/arch/x86/broadwell/memory.json @@ -311,7 +311,7 @@ }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above four.", + "PublicDescription": "Counts randomly selected loads with latency value being above four.", "EventCode": "0xCD", "MSRValue": "0x4", "Counter": "3", @@ -320,13 +320,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4", "MSRIndex": "0x3F6", "SampleAfterValue": "100003", - "BriefDescription": "Loads with latency value being above 4", + "BriefDescription": "Randomly selected loads with latency value being above 4", "TakenAlone": "1", "CounterHTOff": "3" }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above eight.", + "PublicDescription": "Counts randomly selected loads with latency value being above eight.", "EventCode": "0xCD", "MSRValue": "0x8", "Counter": "3", @@ -335,13 +335,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8", "MSRIndex": "0x3F6", "SampleAfterValue": "50021", - "BriefDescription": "Loads with latency value being above 8", + "BriefDescription": "Randomly selected loads with latency value being above 8", "TakenAlone": "1", "CounterHTOff": "3" }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above 16.", + "PublicDescription": "Counts randomly selected loads with latency value being above 16.", "EventCode": "0xCD", "MSRValue": "0x10", "Counter": "3", @@ -350,13 +350,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16", "MSRIndex": "0x3F6", "SampleAfterValue": "20011", - "BriefDescription": "Loads with latency value being above 16", + "BriefDescription": "Randomly selected loads with latency value being above 16", "TakenAlone": "1", "CounterHTOff": "3" }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above 32.", + "PublicDescription": "Counts randomly selected loads with latency value being above 32.", "EventCode": "0xCD", "MSRValue": "0x20", "Counter": "3", @@ -365,13 +365,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32", "MSRIndex": "0x3F6", "SampleAfterValue": "100007", - "BriefDescription": "Loads with latency value being above 32", + "BriefDescription": "Randomly selected loads with latency value being above 32", "TakenAlone": "1", "CounterHTOff": "3" }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above 64.", + "PublicDescription": "Counts randomly selected loads with latency value being above 64.", "EventCode": "0xCD", "MSRValue": "0x40", "Counter": "3", @@ -380,13 +380,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64", "MSRIndex": "0x3F6", "SampleAfterValue": "2003", - "BriefDescription": "Loads with latency value being above 64", + "BriefDescription": "Randomly selected loads with latency value being above 64", "TakenAlone": "1", "CounterHTOff": "3" }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above 128.", + "PublicDescription": "Counts randomly selected loads with latency value being above 128.", "EventCode": "0xCD", "MSRValue": "0x80", "Counter": "3", @@ -395,13 +395,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128", "MSRIndex": "0x3F6", "SampleAfterValue": "1009", - "BriefDescription": "Loads with latency value being above 128", + "BriefDescription": "Randomly selected loads with latency value being above 128", "TakenAlone": "1", "CounterHTOff": "3" }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above 256.", + "PublicDescription": "Counts randomly selected loads with latency value being above 256.", "EventCode": "0xCD", "MSRValue": "0x100", "Counter": "3", @@ -410,13 +410,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256", "MSRIndex": "0x3F6", "SampleAfterValue": "503", - "BriefDescription": "Loads with latency value being above 256", + "BriefDescription": "Randomly selected loads with latency value being above 256", "TakenAlone": "1", "CounterHTOff": "3" }, { "PEBS": "2", - "PublicDescription": "This event counts loads with latency value being above 512.", + "PublicDescription": "Counts randomly selected loads with latency value being above 512.", "EventCode": "0xCD", "MSRValue": "0x200", "Counter": "3", @@ -425,2620 +425,2620 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512", "MSRIndex": "0x3F6", "SampleAfterValue": "101", - "BriefDescription": "Loads with latency value being above 512", + "BriefDescription": "Randomly selected loads with latency value being above 512", "TakenAlone": "1", "CounterHTOff": "3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020001 ", + "MSRValue": "0x2000020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0001 ", + "MSRValue": "0x20003C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000001 ", + "MSRValue": "0x0084000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000001 ", + "MSRValue": "0x0104000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000001 ", + "MSRValue": "0x0204000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000001 ", + "MSRValue": "0x0404000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000001 ", + "MSRValue": "0x1004000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000001 ", + "MSRValue": "0x2004000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000001 ", + "MSRValue": "0x3F84000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000001 ", + "MSRValue": "0x00BC000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000001 ", + "MSRValue": "0x013C000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000001 ", + "MSRValue": "0x023C000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000001 ", + "MSRValue": "0x043C000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0002 ", + "MSRValue": "0x20003C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000002 ", + "MSRValue": "0x3F84000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_RFO & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000002 ", + "MSRValue": "0x00BC000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000002 ", + "MSRValue": "0x013C000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_RFO & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000002 ", + "MSRValue": "0x023C000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000002 ", + "MSRValue": "0x043C000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_RFO & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand data writes (RFOs)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020004 ", + "MSRValue": "0x2000020004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0004 ", + "MSRValue": "0x20003C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000004 ", + "MSRValue": "0x0084000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000004 ", + "MSRValue": "0x0104000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000004 ", + "MSRValue": "0x0204000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000004 ", + "MSRValue": "0x0404000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000004 ", + "MSRValue": "0x1004000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000004 ", + "MSRValue": "0x2004000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000004 ", + "MSRValue": "0x3F84000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000004 ", + "MSRValue": "0x00BC000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000004 ", + "MSRValue": "0x013C000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000004 ", + "MSRValue": "0x023C000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000004 ", + "MSRValue": "0x043C000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_CODE_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020008 ", + "MSRValue": "0x2000020008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0008 ", + "MSRValue": "0x20003C0008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000008 ", + "MSRValue": "0x0084000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000008 ", + "MSRValue": "0x0104000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000008 ", + "MSRValue": "0x0204000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000008 ", + "MSRValue": "0x0404000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000008 ", + "MSRValue": "0x1004000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000008 ", + "MSRValue": "0x2004000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000008 ", + "MSRValue": "0x3F84000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000008 ", + "MSRValue": "0x00BC000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000008 ", + "MSRValue": "0x013C000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts writebacks (modified to exclusive) that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000008 ", + "MSRValue": "0x023C000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts writebacks (modified to exclusive) that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts writebacks (modified to exclusive)", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000008 ", + "MSRValue": "0x043C000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "COREWB & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts writebacks (modified to exclusive)", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020010 ", + "MSRValue": "0x2000020010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0010 ", + "MSRValue": "0x20003C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000010 ", + "MSRValue": "0x0084000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000010 ", + "MSRValue": "0x0104000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000010 ", + "MSRValue": "0x0204000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000010 ", + "MSRValue": "0x0404000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000010 ", + "MSRValue": "0x1004000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000010 ", + "MSRValue": "0x2004000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000010 ", + "MSRValue": "0x3F84000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000010 ", + "MSRValue": "0x00BC000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000010 ", + "MSRValue": "0x013C000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000010 ", + "MSRValue": "0x023C000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000010 ", + "MSRValue": "0x043C000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_DATA_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020020 ", + "MSRValue": "0x2000020020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0020 ", + "MSRValue": "0x20003C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000020 ", + "MSRValue": "0x0084000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000020 ", + "MSRValue": "0x0104000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000020 ", + "MSRValue": "0x0204000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000020 ", + "MSRValue": "0x0404000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000020 ", + "MSRValue": "0x1004000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000020 ", + "MSRValue": "0x2004000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000020 ", + "MSRValue": "0x3F84000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000020 ", + "MSRValue": "0x00BC000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000020 ", + "MSRValue": "0x013C000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000020 ", + "MSRValue": "0x023C000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000020 ", + "MSRValue": "0x043C000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_RFO & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020040 ", + "MSRValue": "0x2000020040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0040 ", + "MSRValue": "0x20003C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000040 ", + "MSRValue": "0x0084000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000040 ", + "MSRValue": "0x0104000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000040 ", + "MSRValue": "0x0204000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000040 ", + "MSRValue": "0x0404000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000040 ", + "MSRValue": "0x1004000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000040 ", + "MSRValue": "0x2004000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000040 ", + "MSRValue": "0x3F84000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000040 ", + "MSRValue": "0x00BC000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000040 ", + "MSRValue": "0x013C000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000040 ", + "MSRValue": "0x023C000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000040 ", + "MSRValue": "0x043C000040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L2_CODE_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020080 ", + "MSRValue": "0x2000020080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0080 ", + "MSRValue": "0x20003C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000080 ", + "MSRValue": "0x0084000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000080 ", + "MSRValue": "0x0104000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000080 ", + "MSRValue": "0x0204000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000080 ", + "MSRValue": "0x0404000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000080 ", + "MSRValue": "0x1004000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000080 ", + "MSRValue": "0x2004000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000080 ", + "MSRValue": "0x3F84000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000080 ", + "MSRValue": "0x00BC000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000080 ", + "MSRValue": "0x013C000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000080 ", + "MSRValue": "0x023C000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000080 ", + "MSRValue": "0x043C000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_DATA_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020100 ", + "MSRValue": "0x2000020100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0100 ", + "MSRValue": "0x20003C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000100 ", + "MSRValue": "0x0084000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000100 ", + "MSRValue": "0x0104000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000100 ", + "MSRValue": "0x0204000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000100 ", + "MSRValue": "0x0404000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000100 ", + "MSRValue": "0x1004000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000100 ", + "MSRValue": "0x2004000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000100 ", + "MSRValue": "0x3F84000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000100 ", + "MSRValue": "0x00BC000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000100 ", + "MSRValue": "0x013C000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000100 ", + "MSRValue": "0x023C000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000100 ", + "MSRValue": "0x043C000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_RFO & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020200 ", + "MSRValue": "0x2000020200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0200 ", + "MSRValue": "0x20003C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000200 ", + "MSRValue": "0x0084000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000200 ", + "MSRValue": "0x0104000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000200 ", + "MSRValue": "0x0204000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000200 ", + "MSRValue": "0x0404000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000200 ", + "MSRValue": "0x1004000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000200 ", + "MSRValue": "0x2004000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000200 ", + "MSRValue": "0x3F84000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000200 ", + "MSRValue": "0x00BC000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000200 ", + "MSRValue": "0x013C000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000200 ", + "MSRValue": "0x023C000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000200 ", + "MSRValue": "0x043C000200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "PF_L3_CODE_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000028000 ", + "MSRValue": "0x2000028000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c8000 ", + "MSRValue": "0x20003C8000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084008000 ", + "MSRValue": "0x0084008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104008000 ", + "MSRValue": "0x0104008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204008000 ", + "MSRValue": "0x0204008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404008000 ", + "MSRValue": "0x0404008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004008000 ", + "MSRValue": "0x1004008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004008000 ", + "MSRValue": "0x2004008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84008000 ", + "MSRValue": "0x3F84008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc008000 ", + "MSRValue": "0x00BC008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c008000 ", + "MSRValue": "0x013C008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts any other requests that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c008000 ", + "MSRValue": "0x023C008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts any other requests that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c008000 ", + "MSRValue": "0x043C008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "OTHER & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts any other requests", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020090 ", + "MSRValue": "0x2000020090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0090 ", + "MSRValue": "0x20003C0090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000090 ", + "MSRValue": "0x0084000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000090 ", + "MSRValue": "0x0104000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000090 ", + "MSRValue": "0x0204000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000090 ", + "MSRValue": "0x0404000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000090 ", + "MSRValue": "0x1004000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000090 ", + "MSRValue": "0x2004000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000090 ", + "MSRValue": "0x3F84000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000090 ", + "MSRValue": "0x00BC000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000090 ", + "MSRValue": "0x013C000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch data reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000090 ", + "MSRValue": "0x023C000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch data reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000090 ", + "MSRValue": "0x043C000090", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_DATA_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020120 ", + "MSRValue": "0x2000020120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0120 ", + "MSRValue": "0x20003C0120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000120 ", + "MSRValue": "0x0084000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000120 ", + "MSRValue": "0x0104000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000120 ", + "MSRValue": "0x0204000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000120 ", + "MSRValue": "0x0404000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000120 ", + "MSRValue": "0x1004000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000120 ", + "MSRValue": "0x2004000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000120 ", + "MSRValue": "0x3F84000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000120 ", + "MSRValue": "0x00BC000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000120 ", + "MSRValue": "0x013C000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch RFOs that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000120 ", + "MSRValue": "0x023C000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch RFOs that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000120 ", + "MSRValue": "0x043C000120", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_RFO & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020240 ", + "MSRValue": "0x2000020240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0240 ", + "MSRValue": "0x20003C0240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000240 ", + "MSRValue": "0x0084000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000240 ", + "MSRValue": "0x0104000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000240 ", + "MSRValue": "0x0204000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000240 ", + "MSRValue": "0x0404000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000240 ", + "MSRValue": "0x1004000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000240 ", + "MSRValue": "0x2004000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000240 ", + "MSRValue": "0x3F84000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000240 ", + "MSRValue": "0x00BC000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000240 ", + "MSRValue": "0x013C000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch code reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000240 ", + "MSRValue": "0x023C000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch code reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch code reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000240 ", + "MSRValue": "0x043C000240", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_PF_CODE_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all prefetch code reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020091 ", + "MSRValue": "0x2000020091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0091 ", + "MSRValue": "0x20003C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000091 ", + "MSRValue": "0x0084000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000091 ", + "MSRValue": "0x0104000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000091 ", + "MSRValue": "0x0204000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000091 ", + "MSRValue": "0x0404000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000091 ", + "MSRValue": "0x1004000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000091 ", + "MSRValue": "0x2004000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000091 ", + "MSRValue": "0x3F84000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000091 ", + "MSRValue": "0x00BC000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000091 ", + "MSRValue": "0x013C000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000091 ", + "MSRValue": "0x023C000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000091 ", + "MSRValue": "0x043C000091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_DATA_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand & prefetch data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2000020122 ", + "MSRValue": "0x2000020122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & SUPPLIER_NONE & SNOOP_NON_DRAM", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the target was non-DRAM system address. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x20003c0122 ", + "MSRValue": "0x20003C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the target was non-DRAM system address.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000122 ", + "MSRValue": "0x0084000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000122 ", + "MSRValue": "0x0104000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000122 ", + "MSRValue": "0x0204000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000122 ", + "MSRValue": "0x0404000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000122 ", + "MSRValue": "0x1004000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x2004000122 ", + "MSRValue": "0x2004000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS_LOCAL_DRAM & SNOOP_NON_DRAM", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f84000122 ", + "MSRValue": "0x3F84000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 with no details on snoop-related information. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000122 ", + "MSRValue": "0x00BC000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 with no details on snoop-related information.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000122 ", + "MSRValue": "0x013C000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 with a snoop miss response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000122 ", + "MSRValue": "0x023C000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 with a snoop miss response.", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000122 ", + "MSRValue": "0x043C000122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "ALL_RFO & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts all demand & prefetch RFOs", "Offcore": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json index 999cf3066363..bb25574b8d21 100644 --- a/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/broadwell/pipeline.json @@ -1,7 +1,6 @@ [ { "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. \nNotes: INST_RETIRED.ANY is counted by a designated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. INST_RETIRED.ANY_P is counted by a programmable counter and it is an architectural performance event. \nCounting: Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.", - "EventCode": "0x00", "Counter": "Fixed counter 0", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -11,7 +10,6 @@ }, { "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", @@ -20,7 +18,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "AnyThread": "1", @@ -31,7 +28,6 @@ }, { "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. \nNote: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'. This event is clocked by base clock (100 Mhz) on Sandy Bridge. The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'. After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.", - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", @@ -317,7 +313,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.", + "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.", "EventCode": "0x87", "Counter": "0,1,2,3", "UMask": "0x1", @@ -786,8 +782,8 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts resource-related stall cycles. Reasons for stalls can be as follows:\n - *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots)\n - *any* u-arch structure got empty (like INT/SIMD FreeLists)\n - FPU control word (FPCW), MXCSR\nand others. This counts cycles that the pipeline backend blocked uop delivery from the front end.", - "EventCode": "0xA2", + "PublicDescription": "This event counts resource-related stall cycles.", + "EventCode": "0xa2", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "RESOURCE_STALLS.ANY", @@ -973,6 +969,7 @@ "CounterHTOff": "2" }, { + "PublicDescription": "Number of Uops delivered by the LSD.", "EventCode": "0xA8", "Counter": "0,1,2,3", "UMask": "0x1", @@ -1147,7 +1144,8 @@ "CounterHTOff": "1" }, { - "PublicDescription": "This event counts FP operations retired. For X87 FP operations that have no exceptions counting also includes flows that have several X87, or flows that use X87 uops in the exception handling.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts FP operations retired. For X87 FP operations that have no exceptions counting also includes flows that have several X87, or flows that use X87 uops in the exception handling.", "EventCode": "0xC0", "Counter": "0,1,2,3", "UMask": "0x2", @@ -1157,12 +1155,12 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PEBS": "1", "EventCode": "0xC1", "Counter": "0,1,2,3", "UMask": "0x40", "EventName": "OTHER_ASSISTS.ANY_WB_ASSIST", "SampleAfterValue": "100003", - "BriefDescription": "Number of times any microcode assist is invoked by HW upon uop writeback.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -1178,26 +1176,28 @@ "Data_LA": "1" }, { - "PublicDescription": "This event counts cycles without actually retired uops.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts cycles without actually retired uops.", "EventCode": "0xC2", "Invert": "1", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "UOPS_RETIRED.STALL_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles without actually retired uops.", + "BriefDescription": "Cycles no executable uops retired (Precise Event)", "CounterMask": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.", + "PEBS": "1", + "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to PEBS uops retired event.", "EventCode": "0xC2", "Invert": "1", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "UOPS_RETIRED.TOTAL_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles with less than 10 actually retired uops.", + "BriefDescription": "Number of cycles using always true condition applied to PEBS uops retired event.", "CounterMask": "10", "CounterHTOff": "0,1,2,3" }, @@ -1320,13 +1320,14 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts not taken branch instructions retired.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts not taken branch instructions retired.", "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x10", "EventName": "BR_INST_RETIRED.NOT_TAKEN", "SampleAfterValue": "400009", - "BriefDescription": "Not taken branch instructions retired.", + "BriefDescription": "Counts all not taken macro branch instructions retired. (Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -1341,14 +1342,15 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts far branch instructions retired.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts far branch instructions retired.", "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x40", "Errata": "BDW98", "EventName": "BR_INST_RETIRED.FAR_BRANCH", "SampleAfterValue": "100007", - "BriefDescription": "Far branch instructions retired.", + "BriefDescription": "Counts the number of far branch instructions retired.(Precise Event)", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/cache.json b/tools/perf/pmu-events/arch/x86/broadwellde/cache.json index 4ad425312bdc..bf243fe2a0ec 100644 --- a/tools/perf/pmu-events/arch/x86/broadwellde/cache.json +++ b/tools/perf/pmu-events/arch/x86/broadwellde/cache.json @@ -439,7 +439,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -451,7 +451,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "SampleAfterValue": "100003", "L1_Hit_Indication": "1", "CounterHTOff": "0,1,2,3" diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json index 0d04bf9db000..e2f0540625a2 100644 --- a/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json @@ -1,6 +1,5 @@ [ { - "EventCode": "0x00", "UMask": "0x1", "BriefDescription": "Instructions retired from execution.", "Counter": "Fixed counter 0", @@ -10,7 +9,6 @@ "CounterHTOff": "Fixed counter 0" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when the thread is not in halt state", "Counter": "Fixed counter 1", @@ -20,7 +18,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", "Counter": "Fixed counter 1", @@ -30,7 +27,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x3", "BriefDescription": "Reference cycles when the core is not in halt state.", "Counter": "Fixed counter 2", @@ -322,7 +318,7 @@ "BriefDescription": "Stalls caused by changing prefix length of the instruction.", "Counter": "0,1,2,3", "EventName": "ILD_STALL.LCP", - "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.", + "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json b/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json index 5a7f1ec24200..c6f9762f32c0 100644 --- a/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json +++ b/tools/perf/pmu-events/arch/x86/broadwellx/bdx-metrics.json @@ -1,164 +1,370 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { "MetricExpr": "min( 1 , IDQ.MITE_UOPS / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )", - "MetricGroup": "Frontend", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE.IFDATA_STALL - (( 14 * ITLB_MISSES.STLB_HIT + cpu@ITLB_MISSES.WALK_DURATION\\,cmask\\=1@ + 7* ITLB_MISSES.WALK_COMPLETED )) ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) * (12 * ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT + BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "Branch_Misprediction_Cost" + }, + { + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (12 * ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT + BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts_SMT", + "MetricName": "Branch_Misprediction_Cost_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" }, { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( cpu@l1d_pend_miss.pending_cycles\\,any\\=1@ / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION + 7 * ( DTLB_STORE_MISSES.WALK_COMPLETED + DTLB_LOAD_MISSES.WALK_COMPLETED + ITLB_MISSES.WALK_COMPLETED ) ) / ( 2 * cycles )", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION + 7*(DTLB_STORE_MISSES.WALK_COMPLETED+DTLB_LOAD_MISSES.WALK_COMPLETED+ITLB_MISSES.WALK_COMPLETED) ) / (2*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles))", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION + 7 * ( DTLB_STORE_MISSES.WALK_COMPLETED + DTLB_LOAD_MISSES.WALK_COMPLETED + ITLB_MISSES.WALK_COMPLETED ) ) / ( 2 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) )", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L3_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2* FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4*( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8* FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { + "MetricExpr": "1000000000 * ( cbox@event\\=0x36\\,umask\\=0x3\\,filter_opc\\=0x182@ / cbox@event\\=0x35\\,umask\\=0x3\\,filter_opc\\=0x182@ ) / ( cbox_0@event\\=0x0@ / duration_time )", + "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_Lat", + "MetricName": "DRAM_Read_Latency" + }, + { + "MetricExpr": "cbox@event\\=0x36\\,umask\\=0x3\\,filter_opc\\=0x182@ / cbox@event\\=0x36\\,umask\\=0x3\\,filter_opc\\=0x182\\,thresh\\=1@", + "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_Parallel_Reads" + }, + { + "MetricExpr": "cbox_0@event\\=0x0@", + "BriefDescription": "Socket actual clocks when any core is active on that socket", + "MetricGroup": "", + "MetricName": "Socket_CLKS" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/cache.json b/tools/perf/pmu-events/arch/x86/broadwellx/cache.json index 141b1080429d..75a3098d5775 100644 --- a/tools/perf/pmu-events/arch/x86/broadwellx/cache.json +++ b/tools/perf/pmu-events/arch/x86/broadwellx/cache.json @@ -57,17 +57,17 @@ }, { "EventCode": "0x24", - "UMask": "0x41", + "UMask": "0xc1", "BriefDescription": "Demand Data Read requests that hit L2 cache", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", - "PublicDescription": "This event counts the number of demand Data Read requests that hit L2 cache. Only not rejected loads are counted.", + "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache.", "SampleAfterValue": "200003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x24", - "UMask": "0x42", + "UMask": "0xc2", "BriefDescription": "RFO requests that hit L2 cache.", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.RFO_HIT", @@ -76,7 +76,7 @@ }, { "EventCode": "0x24", - "UMask": "0x44", + "UMask": "0xc4", "BriefDescription": "L2 cache hits when fetching instructions, code reads.", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.CODE_RD_HIT", @@ -85,7 +85,7 @@ }, { "EventCode": "0x24", - "UMask": "0x50", + "UMask": "0xd0", "BriefDescription": "L2 prefetch requests that hit L2 cache", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.L2_PF_HIT", @@ -396,24 +396,24 @@ { "EventCode": "0xD0", "UMask": "0x11", - "BriefDescription": "Retired load uops that miss the STLB. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops that miss the STLB.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.", + "PublicDescription": "This event counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD0", "UMask": "0x12", - "BriefDescription": "Retired store uops that miss the STLB. (Precise Event - PEBS)", + "BriefDescription": "Retired store uops that miss the STLB.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.", + "PublicDescription": "This event counts store uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.", "SampleAfterValue": "100003", "L1_Hit_Indication": "1", "CounterHTOff": "0,1,2,3" @@ -421,37 +421,37 @@ { "EventCode": "0xD0", "UMask": "0x21", - "BriefDescription": "Retired load uops with locked access. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops with locked access.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "Errata": "BDM35", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with locked access retired to the architected path.", + "PublicDescription": "This event counts load uops with locked access retired to the architected path.", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD0", "UMask": "0x41", - "BriefDescription": "Retired load uops that split across a cacheline boundary.(Precise Event - PEBS)", + "BriefDescription": "Retired load uops that split across a cacheline boundary.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD0", "UMask": "0x42", - "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)", + "BriefDescription": "Retired store uops that split across a cacheline boundary.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "SampleAfterValue": "100003", "L1_Hit_Indication": "1", "CounterHTOff": "0,1,2,3" @@ -459,24 +459,24 @@ { "EventCode": "0xD0", "UMask": "0x81", - "BriefDescription": "All retired load uops. (Precise Event - PEBS)", + "BriefDescription": "All retired load uops.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement. This event also counts SW prefetches.", + "PublicDescription": "This event counts load uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event counts AVX-256bit load/store double-pump memory uops as a single uop at retirement. This event also counts SW prefetches.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD0", "UMask": "0x82", - "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)", + "BriefDescription": "All retired store uops.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement.", + "PublicDescription": "This event counts store uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event counts AVX-256bit load/store double-pump memory uops as a single uop at retirement.", "SampleAfterValue": "2000003", "L1_Hit_Indication": "1", "CounterHTOff": "0,1,2,3" @@ -484,69 +484,69 @@ { "EventCode": "0xD1", "UMask": "0x1", - "BriefDescription": "Retired load uops with L1 cache hits as data sources. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops with L1 cache hits as data sources.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data source were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.", + "PublicDescription": "This event counts retired load uops which data sources were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD1", "UMask": "0x2", - "BriefDescription": "Retired load uops with L2 cache hits as data sources. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops with L2 cache hits as data sources.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "Errata": "BDM35", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the mid-level (L2) cache.", + "PublicDescription": "This event counts retired load uops which data sources were hits in the mid-level (L2) cache.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD1", "UMask": "0x4", - "BriefDescription": "Hit in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT", "Errata": "BDM100", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.", + "PublicDescription": "This event counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.", "SampleAfterValue": "50021", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD1", "UMask": "0x8", - "BriefDescription": "Retired load uops misses in L1 cache as data sources. Uses PEBS.", + "BriefDescription": "Retired load uops misses in L1 cache as data sources.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.", + "PublicDescription": "This event counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD1", "UMask": "0x10", - "BriefDescription": "Retired load uops with L2 cache misses as data sources. Uses PEBS.", + "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.", + "PublicDescription": "This event counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.", "SampleAfterValue": "50021", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD1", "UMask": "0x20", - "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS).", + "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -558,83 +558,84 @@ { "EventCode": "0xD1", "UMask": "0x40", - "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.", + "PublicDescription": "This event counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD2", "UMask": "0x1", - "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_MISS", "Errata": "BDM100", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.", + "PublicDescription": "This event counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.", "SampleAfterValue": "20011", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD2", "UMask": "0x2", - "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT", "Errata": "BDM100", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.", + "PublicDescription": "This event counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.", "SampleAfterValue": "20011", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD2", "UMask": "0x4", - "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM", "Errata": "BDM100", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).", + "PublicDescription": "This event counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).", "SampleAfterValue": "20011", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD2", "UMask": "0x8", - "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required. (Precise Event - PEBS)", + "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_NONE", "Errata": "BDM100", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.", + "PublicDescription": "This event counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD3", "UMask": "0x1", + "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM", "Errata": "BDE70, BDM100", - "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches. This is a precise event.", + "PublicDescription": "Retired load uop whose Data Source was: local DRAM either Snoop not needed or Snoop Miss (RspI).", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD3", "UMask": "0x4", - "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI) (Precise Event)", + "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI)", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -646,7 +647,7 @@ { "EventCode": "0xD3", "UMask": "0x10", - "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM (Precise Event)", + "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -658,7 +659,7 @@ { "EventCode": "0xD3", "UMask": "0x20", - "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache (Precise Event)", + "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -810,12 +811,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all requests that hit in the L3", - "MSRValue": "0x3f803c8fff", + "BriefDescription": "Counts all requests hit in the L3", + "MSRValue": "0x3F803C8FFF", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all requests that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all requests hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -823,12 +824,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c07f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C07F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -836,12 +837,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c07f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C07F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -849,12 +850,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0244", + "BriefDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0244", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -862,12 +863,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0122", + "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -875,12 +876,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0122", + "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -888,12 +889,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0091", + "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -901,12 +902,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0091", + "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -914,12 +915,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3", - "MSRValue": "0x3f803c0200", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3", + "MSRValue": "0x3F803C0200", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -927,12 +928,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3", - "MSRValue": "0x3f803c0100", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3", + "MSRValue": "0x3F803C0100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -940,12 +941,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0002", + "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -953,12 +954,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3", - "MSRValue": "0x3f803c0002", + "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3", + "MSRValue": "0x3F803C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json b/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json index d7b9d9c9c518..ba0e0c4e74eb 100644 --- a/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json +++ b/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json @@ -42,7 +42,7 @@ { "EventCode": "0xC7", "UMask": "0x3", - "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single precision?)", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.SCALAR", "SampleAfterValue": "2000003", @@ -51,7 +51,7 @@ { "EventCode": "0xC7", "UMask": "0x4", - "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired. Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired. Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", "SampleAfterValue": "2000003", @@ -60,7 +60,7 @@ { "EventCode": "0xC7", "UMask": "0x8", - "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", "SampleAfterValue": "2000003", @@ -69,7 +69,7 @@ { "EventCode": "0xC7", "UMask": "0x10", - "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", "SampleAfterValue": "2000003", @@ -78,7 +78,7 @@ { "EventCode": "0xC7", "UMask": "0x15", - "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.", + "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.DOUBLE", "SampleAfterValue": "2000006", @@ -87,7 +87,7 @@ { "EventCode": "0xc7", "UMask": "0x20", - "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired. Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired. Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", "SampleAfterValue": "2000003", @@ -96,7 +96,7 @@ { "EventCode": "0xC7", "UMask": "0x2a", - "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.", + "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.SINGLE", "SampleAfterValue": "2000005", @@ -105,7 +105,7 @@ { "EventCode": "0xC7", "UMask": "0x3c", - "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.", + "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single-precision?)", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.PACKED", "SampleAfterValue": "2000004", diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/memory.json b/tools/perf/pmu-events/arch/x86/broadwellx/memory.json index d79a5cfea44b..ecb413bb67ca 100644 --- a/tools/perf/pmu-events/arch/x86/broadwellx/memory.json +++ b/tools/perf/pmu-events/arch/x86/broadwellx/memory.json @@ -170,11 +170,11 @@ { "EventCode": "0xc8", "UMask": "0x4", - "BriefDescription": "Number of times HLE abort was triggered (PEBS)", + "BriefDescription": "Number of times HLE abort was triggered", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "HLE_RETIRED.ABORTED", - "PublicDescription": "Number of times HLE abort was triggered (PEBS).", + "PublicDescription": "Number of times HLE abort was triggered.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -251,11 +251,11 @@ { "EventCode": "0xc9", "UMask": "0x4", - "BriefDescription": "Number of times RTM abort was triggered (PEBS)", + "BriefDescription": "Number of times RTM abort was triggered", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "RTM_RETIRED.ABORTED", - "PublicDescription": "Number of times RTM abort was triggered (PEBS).", + "PublicDescription": "Number of times RTM abort was triggered .", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3" }, @@ -312,14 +312,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 4", + "BriefDescription": "Randomly selected loads with latency value being above 4", "PEBS": "2", "MSRValue": "0x4", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above four.", + "PublicDescription": "Counts randomly selected loads with latency value being above four.", "TakenAlone": "1", "SampleAfterValue": "100003", "CounterHTOff": "3" @@ -327,14 +327,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 8", + "BriefDescription": "Randomly selected loads with latency value being above 8", "PEBS": "2", "MSRValue": "0x8", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above eight.", + "PublicDescription": "Counts randomly selected loads with latency value being above eight.", "TakenAlone": "1", "SampleAfterValue": "50021", "CounterHTOff": "3" @@ -342,14 +342,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 16", + "BriefDescription": "Randomly selected loads with latency value being above 16", "PEBS": "2", "MSRValue": "0x10", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above 16.", + "PublicDescription": "Counts randomly selected loads with latency value being above 16.", "TakenAlone": "1", "SampleAfterValue": "20011", "CounterHTOff": "3" @@ -357,14 +357,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 32", + "BriefDescription": "Randomly selected loads with latency value being above 32", "PEBS": "2", "MSRValue": "0x20", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above 32.", + "PublicDescription": "Counts randomly selected loads with latency value being above 32.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "3" @@ -372,14 +372,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 64", + "BriefDescription": "Randomly selected loads with latency value being above 64", "PEBS": "2", "MSRValue": "0x40", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above 64.", + "PublicDescription": "Counts randomly selected loads with latency value being above 64.", "TakenAlone": "1", "SampleAfterValue": "2003", "CounterHTOff": "3" @@ -387,14 +387,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 128", + "BriefDescription": "Randomly selected loads with latency value being above 128", "PEBS": "2", "MSRValue": "0x80", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above 128.", + "PublicDescription": "Counts randomly selected loads with latency value being above 128.", "TakenAlone": "1", "SampleAfterValue": "1009", "CounterHTOff": "3" @@ -402,14 +402,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 256", + "BriefDescription": "Randomly selected loads with latency value being above 256", "PEBS": "2", "MSRValue": "0x100", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above 256.", + "PublicDescription": "Counts randomly selected loads with latency value being above 256.", "TakenAlone": "1", "SampleAfterValue": "503", "CounterHTOff": "3" @@ -417,14 +417,14 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 512", + "BriefDescription": "Randomly selected loads with latency value being above 512", "PEBS": "2", "MSRValue": "0x200", "Counter": "3", "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512", "MSRIndex": "0x3F6", "Errata": "BDM100, BDM35", - "PublicDescription": "This event counts loads with latency value being above 512.", + "PublicDescription": "Counts randomly selected loads with latency value being above 512.", "TakenAlone": "1", "SampleAfterValue": "101", "CounterHTOff": "3" @@ -433,12 +433,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all requests that miss in the L3", - "MSRValue": "0x3fbfc08fff", + "BriefDescription": "Counts all requests miss in the L3", + "MSRValue": "0x3FBFC08FFF", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all requests that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all requests miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -446,12 +446,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and clean or shared data is transferred from remote cache", - "MSRValue": "0x087fc007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and clean or shared data is transferred from remote cache", + "MSRValue": "0x087FC007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HIT_FORWARD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and clean or shared data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and clean or shared data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -459,12 +459,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the modified data is transferred from remote cache", - "MSRValue": "0x103fc007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the modified data is transferred from remote cache", + "MSRValue": "0x103FC007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HITM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the modified data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -472,12 +472,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from remote dram", - "MSRValue": "0x063bc007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from remote dram", + "MSRValue": "0x063BC007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from remote dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from remote dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -485,12 +485,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram", - "MSRValue": "0x06040007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from local dram", + "MSRValue": "0x06040007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -498,12 +498,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3", - "MSRValue": "0x3fbfc007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss in the L3", + "MSRValue": "0x3FBFC007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -511,12 +511,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram", "MSRValue": "0x0604000244", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -524,12 +524,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch code reads that miss in the L3", - "MSRValue": "0x3fbfc00244", + "BriefDescription": "Counts all demand & prefetch code reads miss in the L3", + "MSRValue": "0x3FBFC00244", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -537,12 +537,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram", "MSRValue": "0x0604000122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -550,12 +550,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss in the L3", - "MSRValue": "0x3fbfc00122", + "BriefDescription": "Counts all demand & prefetch RFOs miss in the L3", + "MSRValue": "0x3FBFC00122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -563,12 +563,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache", - "MSRValue": "0x087fc00091", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and clean or shared data is transferred from remote cache", + "MSRValue": "0x087FC00091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_HIT_FORWARD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and clean or shared data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -576,12 +576,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache", - "MSRValue": "0x103fc00091", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the modified data is transferred from remote cache", + "MSRValue": "0x103FC00091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_HITM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the modified data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -589,12 +589,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram", - "MSRValue": "0x063bc00091", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from remote dram", + "MSRValue": "0x063BC00091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from remote dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -602,12 +602,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram", "MSRValue": "0x0604000091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -615,12 +615,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss in the L3", - "MSRValue": "0x3fbfc00091", + "BriefDescription": "Counts all demand & prefetch data reads miss in the L3", + "MSRValue": "0x3FBFC00091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -628,12 +628,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3", - "MSRValue": "0x3fbfc00200", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3", + "MSRValue": "0x3FBFC00200", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -641,12 +641,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3", - "MSRValue": "0x3fbfc00100", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3", + "MSRValue": "0x3FBFC00100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -654,12 +654,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache", - "MSRValue": "0x103fc00002", + "BriefDescription": "Counts all demand data writes (RFOs) miss the L3 and the modified data is transferred from remote cache", + "MSRValue": "0x103FC00002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.REMOTE_HITM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) miss the L3 and the modified data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -667,12 +667,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss in the L3", - "MSRValue": "0x3fbfc00002", + "BriefDescription": "Counts all demand data writes (RFOs) miss in the L3", + "MSRValue": "0x3FBFC00002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json index 0d04bf9db000..c2f6932a5817 100644 --- a/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json @@ -1,6 +1,5 @@ [ { - "EventCode": "0x00", "UMask": "0x1", "BriefDescription": "Instructions retired from execution.", "Counter": "Fixed counter 0", @@ -10,7 +9,6 @@ "CounterHTOff": "Fixed counter 0" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when the thread is not in halt state", "Counter": "Fixed counter 1", @@ -20,7 +18,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", "Counter": "Fixed counter 1", @@ -30,7 +27,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x3", "BriefDescription": "Reference cycles when the core is not in halt state.", "Counter": "Fixed counter 2", @@ -322,7 +318,7 @@ "BriefDescription": "Stalls caused by changing prefix length of the instruction.", "Counter": "0,1,2,3", "EventName": "ILD_STALL.LCP", - "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.", + "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -786,12 +782,12 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA2", + "EventCode": "0xa2", "UMask": "0x1", "BriefDescription": "Resource-related stall cycles", "Counter": "0,1,2,3", "EventName": "RESOURCE_STALLS.ANY", - "PublicDescription": "This event counts resource-related stall cycles. Reasons for stalls can be as follows:\n - *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots)\n - *any* u-arch structure got empty (like INT/SIMD FreeLists)\n - FPU control word (FPCW), MXCSR\nand others. This counts cycles that the pipeline backend blocked uop delivery from the front end.", + "PublicDescription": "This event counts resource-related stall cycles.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1168,12 +1164,12 @@ { "EventCode": "0xC2", "UMask": "0x1", - "BriefDescription": "Actually retired uops. (Precise Event - PEBS)", + "BriefDescription": "Actually retired uops.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "UOPS_RETIRED.ALL", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts all actually retired uops. Counting increments by two for micro-fused uops, and by one for macro-fused and other uops. Maximal increment value for one cycle is eight.", + "PublicDescription": "This event counts all actually retired uops. Counting increments by two for micro-fused uops, and by one for macro-fused and other uops. Maximal increment value for one cycle is eight.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1204,11 +1200,11 @@ { "EventCode": "0xC2", "UMask": "0x2", - "BriefDescription": "Retirement slots used. (Precise Event - PEBS)", + "BriefDescription": "Retirement slots used.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "UOPS_RETIRED.RETIRE_SLOTS", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts the number of retirement slots used.", + "PublicDescription": "This event counts the number of retirement slots used.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1266,33 +1262,33 @@ { "EventCode": "0xC4", "UMask": "0x1", - "BriefDescription": "Conditional branch instructions retired. (Precise Event - PEBS)", + "BriefDescription": "Conditional branch instructions retired.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.CONDITIONAL", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts conditional branch instructions retired.", + "PublicDescription": "This event counts conditional branch instructions retired.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xC4", "UMask": "0x2", - "BriefDescription": "Direct and indirect near call instructions retired. (Precise Event - PEBS)", + "BriefDescription": "Direct and indirect near call instructions retired.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.NEAR_CALL", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts both direct and indirect near call instructions retired.", + "PublicDescription": "This event counts both direct and indirect near call instructions retired.", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xC4", "UMask": "0x2", - "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3). (Precise Event - PEBS)", + "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3).", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.NEAR_CALL_R3", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts both direct and indirect macro near call instructions retired (captured in ring 3).", + "PublicDescription": "This event counts both direct and indirect macro near call instructions retired (captured in ring 3).", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1311,11 +1307,11 @@ { "EventCode": "0xC4", "UMask": "0x8", - "BriefDescription": "Return instructions retired. (Precise Event - PEBS)", + "BriefDescription": "Return instructions retired.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.NEAR_RETURN", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts return instructions retired.", + "PublicDescription": "This event counts return instructions retired.", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1332,11 +1328,11 @@ { "EventCode": "0xC4", "UMask": "0x20", - "BriefDescription": "Taken branch instructions retired. (Precise Event - PEBS)", + "BriefDescription": "Taken branch instructions retired.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.NEAR_TAKEN", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts taken branch instructions retired.", + "PublicDescription": "This event counts taken branch instructions retired.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1364,11 +1360,11 @@ { "EventCode": "0xC5", "UMask": "0x1", - "BriefDescription": "Mispredicted conditional branch instructions retired. (Precise Event - PEBS)", + "BriefDescription": "Mispredicted conditional branch instructions retired.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_MISP_RETIRED.CONDITIONAL", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts mispredicted conditional branch instructions retired.", + "PublicDescription": "This event counts mispredicted conditional branch instructions retired.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1386,22 +1382,22 @@ { "EventCode": "0xC5", "UMask": "0x8", - "BriefDescription": "This event counts the number of mispredicted ret instructions retired.(Precise Event)", + "BriefDescription": "This event counts the number of mispredicted ret instructions retired. Non PEBS", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_MISP_RETIRED.RET", - "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts mispredicted return instructions retired.", + "PublicDescription": "This event counts mispredicted return instructions retired.", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xC5", "UMask": "0x20", - "BriefDescription": "number of near branch instructions retired that were mispredicted and taken. (Precise Event - PEBS).", + "BriefDescription": "number of near branch instructions retired that were mispredicted and taken.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_MISP_RETIRED.NEAR_TAKEN", - "PublicDescription": "Number of near branch instructions retired that were mispredicted and taken. (Precise Event - PEBS).", + "PublicDescription": "Number of near branch instructions retired that were mispredicted and taken.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json index 71e9737f4614..1a1a3501180a 100644 --- a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json +++ b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json @@ -1,164 +1,394 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", - "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ((UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 64 * ( ICACHE_64B.IFTAG_HIT + ICACHE_64B.IFTAG_MISS ) / 4.1) )", - "MetricGroup": "Frontend", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { + "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 64 * ( ICACHE_64B.IFTAG_HIT + ICACHE_64B.IFTAG_MISS ) / 4.1 ) )", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ))", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE_16B.IFDATA_STALL - ICACHE_64B.IFTAG_STALL ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "Branch_Misprediction_Cost" + }, + { + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts_SMT", + "MetricName": "Branch_Misprediction_Cost_SMT" }, { + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" + }, + { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( L1D_PEND_MISS.PENDING_CYCLES_ANY / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * cycles )", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles) )", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) )", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Access_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2* FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4*( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8* FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { + "MetricExpr": "1000000000 * ( cha@event\\=0x36\\\\\\,umask\\=0x21@ / cha@event\\=0x35\\\\\\,umask\\=0x21@ ) / ( cha_0@event\\=0x0@ / duration_time )", + "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_Lat", + "MetricName": "DRAM_Read_Latency" + }, + { + "MetricExpr": "cha@event\\=0x36\\\\\\,umask\\=0x21@ / cha@event\\=0x36\\\\\\,umask\\=0x21\\\\\\,thresh\\=1@", + "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_Parallel_Reads" + }, + { + "MetricExpr": "( 1000000000 * ( imc@event\\=0xe0\\\\\\,umask\\=0x1@ / imc@event\\=0xe3@ ) / imc_0@event\\=0x0@ ) if 1 if 1 == 1 else 0 else 0", + "BriefDescription": "Average latency of data read request to external 3D X-Point memory [in nanoseconds]. Accounts for demand loads and L1/L2 data-read prefetches", + "MetricGroup": "Memory_Lat", + "MetricName": "MEM_PMM_Read_Latency" + }, + { + "MetricExpr": "( ( 64 * imc@event\\=0xe3@ / 1000000000 ) / duration_time ) if 1 if 1 == 1 else 0 else 0", + "BriefDescription": "Average 3DXP Memory Bandwidth Use for reads [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "PMM_Read_BW" + }, + { + "MetricExpr": "( ( 64 * imc@event\\=0xe7@ / 1000000000 ) / duration_time ) if 1 if 1 == 1 else 0 else 0", + "BriefDescription": "Average 3DXP Memory Bandwidth Use for Writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "PMM_Write_BW" + }, + { + "MetricExpr": "cha_0@event\\=0x0@", + "BriefDescription": "Socket actual clocks when any core is active on that socket", + "MetricGroup": "", + "MetricName": "Socket_CLKS" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/goldmont/cache.json b/tools/perf/pmu-events/arch/x86/goldmont/cache.json index f8bbe087b0f8..52a105666afc 100644 --- a/tools/perf/pmu-events/arch/x86/goldmont/cache.json +++ b/tools/perf/pmu-events/arch/x86/goldmont/cache.json @@ -77,7 +77,8 @@ "UMask": "0x21", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Locked load uops retired (Precise event capable)" + "BriefDescription": "Locked load uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -88,7 +89,8 @@ "UMask": "0x41", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)" + "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -99,7 +101,8 @@ "UMask": "0x42", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "SampleAfterValue": "200003", - "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)" + "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -110,7 +113,8 @@ "UMask": "0x43", "EventName": "MEM_UOPS_RETIRED.SPLIT", "SampleAfterValue": "200003", - "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)" + "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -121,7 +125,8 @@ "UMask": "0x81", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired (Precise event capable)" + "BriefDescription": "Load uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -132,7 +137,8 @@ "UMask": "0x82", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "SampleAfterValue": "200003", - "BriefDescription": "Store uops retired (Precise event capable)" + "BriefDescription": "Store uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -143,7 +149,8 @@ "UMask": "0x83", "EventName": "MEM_UOPS_RETIRED.ALL", "SampleAfterValue": "200003", - "BriefDescription": "Memory uops retired (Precise event capable)" + "BriefDescription": "Memory uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -154,7 +161,8 @@ "UMask": "0x1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that hit L1 data cache (Precise event capable)" + "BriefDescription": "Load uops retired that hit L1 data cache (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -165,7 +173,8 @@ "UMask": "0x2", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that hit L2 (Precise event capable)" + "BriefDescription": "Load uops retired that hit L2 (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -176,7 +185,8 @@ "UMask": "0x8", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that missed L1 data cache (Precise event capable)" + "BriefDescription": "Load uops retired that missed L1 data cache (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -187,7 +197,8 @@ "UMask": "0x10", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that missed L2 (Precise event capable)" + "BriefDescription": "Load uops retired that missed L2 (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -198,7 +209,8 @@ "UMask": "0x20", "EventName": "MEM_LOAD_UOPS_RETIRED.HITM", "SampleAfterValue": "200003", - "BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise event capable)" + "BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -209,7 +221,8 @@ "UMask": "0x40", "EventName": "MEM_LOAD_UOPS_RETIRED.WCB_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Loads retired that hit WCB (Precise event capable)" + "BriefDescription": "Loads retired that hit WCB (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -220,26 +233,14 @@ "UMask": "0x80", "EventName": "MEM_LOAD_UOPS_RETIRED.DRAM_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Loads retired that came from DRAM (Precise event capable)" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x40000032b7 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_READ.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" + "BriefDescription": "Loads retired that came from DRAM (Precise event capable)", + "Data_LA": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x36000032b7 ", + "MSRValue": "0x36000032b7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.ANY", @@ -252,7 +253,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x10000032b7 ", + "MSRValue": "0x10000032b7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.HITM_OTHER_CORE", @@ -265,7 +266,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x04000032b7 ", + "MSRValue": "0x04000032b7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -278,20 +279,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x02000032b7 ", + "MSRValue": "0x02000032b7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x00000432b7 ", + "MSRValue": "0x00000432b7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT", @@ -302,35 +303,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x00000132b7 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_READ.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000022 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_RFO.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000022 ", + "MSRValue": "0x3600000022", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.ANY", @@ -343,7 +318,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000000022 ", + "MSRValue": "0x1000000022", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.HITM_OTHER_CORE", @@ -356,7 +331,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000022 ", + "MSRValue": "0x0400000022", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -369,20 +344,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000022 ", + "MSRValue": "0x0200000022", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040022 ", + "MSRValue": "0x0000040022", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT", @@ -393,32 +368,6 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010022 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data reads (demand & prefetch) that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000003091", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads (demand & prefetch) that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts data reads (demand & prefetch) that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", "MSRValue": "0x3600003091", @@ -466,7 +415,7 @@ "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data reads (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -484,35 +433,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts data reads (demand & prefetch) that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000013091", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads (demand & prefetch) that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000003010 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600003010 ", + "MSRValue": "0x3600003010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.ANY", @@ -525,7 +448,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000003010 ", + "MSRValue": "0x1000003010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.HITM_OTHER_CORE", @@ -538,7 +461,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400003010 ", + "MSRValue": "0x0400003010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -551,20 +474,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200003010 ", + "MSRValue": "0x0200003010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000043010 ", + "MSRValue": "0x0000043010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_HIT", @@ -575,48 +498,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000013010 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts requests to the uncore subsystem that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000008000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts requests to the uncore subsystem that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts requests to the uncore subsystem that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x3600008000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.ANY", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts requests to the uncore subsystem that miss the L2 cache.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts requests to the uncore subsystem that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000008000 ", + "MSRValue": "0x1000008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.HITM_OTHER_CORE", @@ -629,7 +513,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts requests to the uncore subsystem that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400008000 ", + "MSRValue": "0x0400008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -642,20 +526,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts requests to the uncore subsystem that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200008000 ", + "MSRValue": "0x0200008000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts requests to the uncore subsystem that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts requests to the uncore subsystem that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts requests to the uncore subsystem that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000048000 ", + "MSRValue": "0x0000048000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT", @@ -668,7 +552,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts requests to the uncore subsystem that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000018000 ", + "MSRValue": "0x0000018000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.ANY_RESPONSE", @@ -679,22 +563,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000004800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600004800 ", + "MSRValue": "0x3600004800", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.ANY", @@ -705,48 +576,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x1000004800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0400004800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0200004800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that true miss for the L2 cache with a snoop miss in the other processor module. ", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000044800 ", + "MSRValue": "0x0000044800", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_HIT", @@ -757,35 +589,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000014800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000004000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600004000 ", + "MSRValue": "0x3600004000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.ANY", @@ -798,7 +604,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000004000 ", + "MSRValue": "0x1000004000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.HITM_OTHER_CORE", @@ -811,7 +617,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400004000 ", + "MSRValue": "0x0400004000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -824,20 +630,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200004000 ", + "MSRValue": "0x0200004000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000044000 ", + "MSRValue": "0x0000044000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_HIT", @@ -848,35 +654,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000014000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000002000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600002000 ", + "MSRValue": "0x3600002000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.ANY", @@ -889,7 +669,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000002000 ", + "MSRValue": "0x1000002000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.HITM_OTHER_CORE", @@ -902,7 +682,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400002000 ", + "MSRValue": "0x0400002000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -915,20 +695,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200002000 ", + "MSRValue": "0x0200002000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000042000 ", + "MSRValue": "0x0000042000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT", @@ -939,35 +719,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000012000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cache lines requests by software prefetch instructions that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000001000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache lines requests by software prefetch instructions that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600001000 ", + "MSRValue": "0x3600001000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.ANY", @@ -980,7 +734,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000001000 ", + "MSRValue": "0x1000001000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.HITM_OTHER_CORE", @@ -993,7 +747,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400001000 ", + "MSRValue": "0x0400001000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -1006,20 +760,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200001000 ", + "MSRValue": "0x0200001000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache lines requests by software prefetch instructions that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data cache lines requests by software prefetch instructions that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000041000 ", + "MSRValue": "0x0000041000", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_HIT", @@ -1030,35 +784,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cache lines requests by software prefetch instructions that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000011000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache lines requests by software prefetch instructions that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000800 ", + "MSRValue": "0x3600000800", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.ANY", @@ -1071,7 +799,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000000800 ", + "MSRValue": "0x1000000800", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.HITM_OTHER_CORE", @@ -1084,7 +812,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000800 ", + "MSRValue": "0x0400000800", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -1097,20 +825,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000800 ", + "MSRValue": "0x0200000800", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040800 ", + "MSRValue": "0x0000040800", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_HIT", @@ -1121,100 +849,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts bus lock and split lock requests that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000400 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts bus lock and split lock requests that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x3600000400 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_MISS.ANY", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests that miss the L2 cache.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts bus lock and split lock requests that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x1000000400 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_MISS.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts bus lock and split lock requests that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0400000400 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_MISS.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts bus lock and split lock requests that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0200000400 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests that true miss for the L2 cache with a snoop miss in the other processor module. ", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts bus lock and split lock requests that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000040400 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests that hit the L2 cache.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts bus lock and split lock requests that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000010400 ", + "MSRValue": "0x0000010400", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.ANY_RESPONSE", @@ -1225,113 +862,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x3600000200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.L2_MISS.ANY", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x1000000200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.L2_MISS.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0400000200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0200000200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that true miss for the L2 cache with a snoop miss in the other processor module. ", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000040200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.L2_HIT", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that hit the L2 cache.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000100 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000100 ", + "MSRValue": "0x3600000100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_MISS.ANY", @@ -1342,87 +875,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x1000000100 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_MISS.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0400000100 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_MISS.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0200000100 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that true miss for the L2 cache with a snoop miss in the other processor module. ", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000040100 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that hit the L2 cache.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010100 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000080 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000080 ", + "MSRValue": "0x3600000080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_MISS.ANY", @@ -1433,87 +888,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x1000000080 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_MISS.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0400000080 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_MISS.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0200000080 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that true miss for the L2 cache with a snoop miss in the other processor module. ", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000040080 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that hit the L2 cache.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010080 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000020 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000020 ", + "MSRValue": "0x3600000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.ANY", @@ -1526,7 +903,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000000020 ", + "MSRValue": "0x1000000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.HITM_OTHER_CORE", @@ -1539,7 +916,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000020 ", + "MSRValue": "0x0400000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -1552,20 +929,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000020 ", + "MSRValue": "0x0200000020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040020 ", + "MSRValue": "0x0000040020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT", @@ -1576,35 +953,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010020 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000010 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000010 ", + "MSRValue": "0x3600000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.ANY", @@ -1617,7 +968,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000000010 ", + "MSRValue": "0x1000000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.HITM_OTHER_CORE", @@ -1630,7 +981,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000010 ", + "MSRValue": "0x0400000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -1643,20 +994,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000010 ", + "MSRValue": "0x0200000010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040010 ", + "MSRValue": "0x0000040010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_HIT", @@ -1667,35 +1018,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010010 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x4000000008 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.COREWB.OUTSTANDING", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000008 ", + "MSRValue": "0x3600000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.ANY", @@ -1708,7 +1033,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000000008 ", + "MSRValue": "0x1000000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.HITM_OTHER_CORE", @@ -1721,7 +1046,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000008 ", + "MSRValue": "0x0400000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -1734,20 +1059,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000008 ", + "MSRValue": "0x0200000008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040008 ", + "MSRValue": "0x0000040008", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.COREWB.L2_HIT", @@ -1758,22 +1083,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010008 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.COREWB.ANY_RESPONSE", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x4000000004 ", + "MSRValue": "0x4000000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.OUTSTANDING", @@ -1786,7 +1098,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000004 ", + "MSRValue": "0x3600000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.ANY", @@ -1797,22 +1109,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x1000000004 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000004 ", + "MSRValue": "0x0400000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -1825,20 +1124,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000004 ", + "MSRValue": "0x0200000004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040004 ", + "MSRValue": "0x0000040004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT", @@ -1849,22 +1148,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010004 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x4000000002 ", + "MSRValue": "0x4000000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.OUTSTANDING", @@ -1877,7 +1163,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000002 ", + "MSRValue": "0x3600000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.ANY", @@ -1890,7 +1176,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000000002 ", + "MSRValue": "0x1000000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.HITM_OTHER_CORE", @@ -1903,7 +1189,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000002 ", + "MSRValue": "0x0400000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -1916,20 +1202,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000002 ", + "MSRValue": "0x0200000002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040002 ", + "MSRValue": "0x0000040002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT", @@ -1940,22 +1226,9 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010002 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that have any transaction responses from the uncore subsystem.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x4000000001 ", + "MSRValue": "0x4000000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.OUTSTANDING", @@ -1968,7 +1241,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x3600000001 ", + "MSRValue": "0x3600000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.ANY", @@ -1981,7 +1254,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x1000000001 ", + "MSRValue": "0x1000000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.HITM_OTHER_CORE", @@ -1994,7 +1267,7 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0400000001 ", + "MSRValue": "0x0400000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", @@ -2007,20 +1280,20 @@ "CollectPEBSRecord": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0200000001 ", + "MSRValue": "0x0200000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data reads of full cache lines that true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts demand cacheable data reads of full cache lines that true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { "CollectPEBSRecord": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "EventCode": "0xB7", - "MSRValue": "0x0000040001 ", + "MSRValue": "0x0000040001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT", @@ -2028,18 +1301,5 @@ "SampleAfterValue": "100007", "BriefDescription": "Counts demand cacheable data reads of full cache lines that hit the L2 cache.", "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand cacheable data reads of full cache lines that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x0000010001 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data reads of full cache lines that have any transaction responses from the uncore subsystem.", - "Offcore": "1" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/goldmont/memory.json b/tools/perf/pmu-events/arch/x86/goldmont/memory.json index 690cebd12a94..197dc76d49dd 100644 --- a/tools/perf/pmu-events/arch/x86/goldmont/memory.json +++ b/tools/perf/pmu-events/arch/x86/goldmont/memory.json @@ -30,265 +30,5 @@ "EventName": "MACHINE_CLEARS.MEMORY_ORDERING", "SampleAfterValue": "200003", "BriefDescription": "Machine clears due to memory ordering issue" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x20000032b7 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000022 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data reads (demand & prefetch) that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000003091", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads (demand & prefetch) that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000003010 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts requests to the uncore subsystem that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000008000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts requests to the uncore subsystem that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000004800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000004000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000002000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000001000 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000800 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts bus lock and split lock requests that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000400 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000200 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.UC_CODE_RD.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts code reads in uncacheable (UC) memory region that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000100 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000080 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000020 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000010 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000008 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6", - "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000004 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000002 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" - }, - { - "CollectPEBSRecord": "1", - "PublicDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache and targets non-DRAM system address. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "EventCode": "0xB7", - "MSRValue": "0x2000000001 ", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.NON_DRAM", - "MSRIndex": "0x1a6,0x1a7", - "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache and targets non-DRAM system address.", - "Offcore": "1" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json b/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json index 254788af8ab6..6342368accf8 100644 --- a/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/goldmont/pipeline.json @@ -1,7 +1,6 @@ [ { "PublicDescription": "Counts the number of instructions that retire execution. For instructions that consist of multiple uops, this event counts the retirement of the last uop of the instruction. The counter continues counting during hardware interrupts, traps, and inside interrupt handlers. This event uses fixed counter 0. You cannot collect a PEBs record for this event.", - "EventCode": "0x00", "Counter": "Fixed counter 0", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -10,7 +9,6 @@ }, { "PublicDescription": "Counts the number of core cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. This event uses fixed counter 1. You cannot collect a PEBs record for this event.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.CORE", @@ -19,7 +17,6 @@ }, { "PublicDescription": "Counts the number of reference cycles that the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time. This event is not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. This event uses fixed counter 2. You cannot collect a PEBs record for this event.", - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", @@ -188,7 +185,7 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of times that the processor detects that a program is writing to a code section and has to perform a machine clear because of that modification. Self-modifying code (SMC) causes a severe penalty in all Intel architecture processors.", + "PublicDescription": "Counts the number of times that the processor detects that a program is writing to a code section and has to perform a machine clear because of that modification. Self-modifying code (SMC) causes a severe penalty in all Intel\u00ae architecture processors.", "EventCode": "0xC3", "Counter": "0,1,2,3", "UMask": "0x1", diff --git a/tools/perf/pmu-events/arch/x86/goldmont/virtual-memory.json b/tools/perf/pmu-events/arch/x86/goldmont/virtual-memory.json index 9805198d3f5f..343d66bbd777 100644 --- a/tools/perf/pmu-events/arch/x86/goldmont/virtual-memory.json +++ b/tools/perf/pmu-events/arch/x86/goldmont/virtual-memory.json @@ -48,7 +48,8 @@ "UMask": "0x11", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that missed the DTLB (Precise event capable)" + "BriefDescription": "Load uops retired that missed the DTLB (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -59,7 +60,8 @@ "UMask": "0x12", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_STORES", "SampleAfterValue": "200003", - "BriefDescription": "Store uops retired that missed the DTLB (Precise event capable)" + "BriefDescription": "Store uops retired that missed the DTLB (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -70,6 +72,7 @@ "UMask": "0x13", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS", "SampleAfterValue": "200003", - "BriefDescription": "Memory uops retired that missed the DTLB (Precise event capable)" + "BriefDescription": "Memory uops retired that missed the DTLB (Precise event capable)", + "Data_LA": "1" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/goldmontplus/cache.json b/tools/perf/pmu-events/arch/x86/goldmontplus/cache.json index b4791b443a66..5a6ac8285ad4 100644 --- a/tools/perf/pmu-events/arch/x86/goldmontplus/cache.json +++ b/tools/perf/pmu-events/arch/x86/goldmontplus/cache.json @@ -92,7 +92,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Locked load uops retired (Precise event capable)" + "BriefDescription": "Locked load uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -104,7 +105,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)" + "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -116,7 +118,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "SampleAfterValue": "200003", - "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)" + "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -128,7 +131,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT", "SampleAfterValue": "200003", - "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)" + "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -140,7 +144,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired (Precise event capable)" + "BriefDescription": "Load uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -152,7 +157,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "SampleAfterValue": "200003", - "BriefDescription": "Store uops retired (Precise event capable)" + "BriefDescription": "Store uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -164,7 +170,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.ALL", "SampleAfterValue": "200003", - "BriefDescription": "Memory uops retired (Precise event capable)" + "BriefDescription": "Memory uops retired (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -176,7 +183,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that hit L1 data cache (Precise event capable)" + "BriefDescription": "Load uops retired that hit L1 data cache (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -188,7 +196,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that hit L2 (Precise event capable)" + "BriefDescription": "Load uops retired that hit L2 (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -200,7 +209,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that missed L1 data cache (Precise event capable)" + "BriefDescription": "Load uops retired that missed L1 data cache (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -212,7 +222,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that missed L2 (Precise event capable)" + "BriefDescription": "Load uops retired that missed L2 (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -224,7 +235,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.HITM", "SampleAfterValue": "200003", - "BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise event capable)" + "BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -236,7 +248,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.WCB_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Loads retired that hit WCB (Precise event capable)" + "BriefDescription": "Loads retired that hit WCB (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -248,7 +261,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.DRAM_HIT", "SampleAfterValue": "200003", - "BriefDescription": "Loads retired that came from DRAM (Precise event capable)" + "BriefDescription": "Loads retired that came from DRAM (Precise event capable)", + "Data_LA": "1" }, { "CollectPEBSRecord": "1", @@ -292,7 +306,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data reads of full cache lines true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts demand cacheable data reads of full cache lines true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -367,7 +381,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -442,7 +456,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -517,7 +531,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -592,7 +606,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -667,7 +681,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -742,7 +756,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts bus lock and split lock requests true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts bus lock and split lock requests true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -817,7 +831,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -892,7 +906,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache lines requests by software prefetch instructions true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data cache lines requests by software prefetch instructions true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -967,7 +981,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -1042,7 +1056,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -1117,7 +1131,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts requests to the uncore subsystem true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts requests to the uncore subsystem true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -1192,7 +1206,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -1267,7 +1281,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data reads (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data reads (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -1342,7 +1356,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { @@ -1417,7 +1431,7 @@ "PDIR_COUNTER": "na", "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module. ", + "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module.", "Offcore": "1" }, { diff --git a/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json b/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json index ccf1aed69197..e3fa1a0ba71b 100644 --- a/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json @@ -3,7 +3,6 @@ "PEBS": "2", "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of instructions that retire execution. For instructions that consist of multiple uops, this event counts the retirement of the last uop of the instruction. The counter continues counting during hardware interrupts, traps, and inside interrupt handlers. This event uses fixed counter 0. You cannot collect a PEBs record for this event.", - "EventCode": "0x00", "Counter": "Fixed counter 0", "UMask": "0x1", "PEBScounters": "32", @@ -15,7 +14,6 @@ { "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of core cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. This event uses fixed counter 1. You cannot collect a PEBs record for this event.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "PEBScounters": "33", @@ -27,7 +25,6 @@ { "CollectPEBSRecord": "1", "PublicDescription": "Counts the number of reference cycles that the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time. This event is not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. This event uses fixed counter 2. You cannot collect a PEBs record for this event.", - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x3", "PEBScounters": "34", @@ -231,7 +228,7 @@ }, { "CollectPEBSRecord": "1", - "PublicDescription": "Counts the number of times that the processor detects that a program is writing to a code section and has to perform a machine clear because of that modification. Self-modifying code (SMC) causes a severe penalty in all Intel architecture processors.", + "PublicDescription": "Counts the number of times that the processor detects that a program is writing to a code section and has to perform a machine clear because of that modification. Self-modifying code (SMC) causes a severe penalty in all Intel\u00ae architecture processors.", "EventCode": "0xC3", "Counter": "0,1,2,3", "UMask": "0x1", diff --git a/tools/perf/pmu-events/arch/x86/goldmontplus/virtual-memory.json b/tools/perf/pmu-events/arch/x86/goldmontplus/virtual-memory.json index 0b53a3b0dfb8..0d32fd26ded1 100644 --- a/tools/perf/pmu-events/arch/x86/goldmontplus/virtual-memory.json +++ b/tools/perf/pmu-events/arch/x86/goldmontplus/virtual-memory.json @@ -189,7 +189,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_LOADS", "SampleAfterValue": "200003", - "BriefDescription": "Load uops retired that missed the DTLB (Precise event capable)" + "BriefDescription": "Load uops retired that missed the DTLB (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -201,7 +202,8 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_STORES", "SampleAfterValue": "200003", - "BriefDescription": "Store uops retired that missed the DTLB (Precise event capable)" + "BriefDescription": "Store uops retired that missed the DTLB (Precise event capable)", + "Data_LA": "1" }, { "PEBS": "2", @@ -213,6 +215,7 @@ "PEBScounters": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS", "SampleAfterValue": "200003", - "BriefDescription": "Memory uops retired that missed the DTLB (Precise event capable)" + "BriefDescription": "Memory uops retired that missed the DTLB (Precise event capable)", + "Data_LA": "1" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/haswell/cache.json b/tools/perf/pmu-events/arch/x86/haswell/cache.json index da4d6ddd4f92..7fb0ad8d8ca1 100644 --- a/tools/perf/pmu-events/arch/x86/haswell/cache.json +++ b/tools/perf/pmu-events/arch/x86/haswell/cache.json @@ -63,10 +63,10 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Demand data read requests that hit L2 cache.", + "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x41", + "UMask": "0xc1", "Errata": "HSD78", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "SampleAfterValue": "200003", @@ -77,7 +77,7 @@ "PublicDescription": "Counts the number of store RFO requests that hit the L2 cache.", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x42", + "UMask": "0xc2", "EventName": "L2_RQSTS.RFO_HIT", "SampleAfterValue": "200003", "BriefDescription": "RFO requests that hit L2 cache", @@ -87,7 +87,7 @@ "PublicDescription": "Number of instruction fetches that hit the L2 cache.", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x44", + "UMask": "0xc4", "EventName": "L2_RQSTS.CODE_RD_HIT", "SampleAfterValue": "200003", "BriefDescription": "L2 cache hits when fetching instructions, code reads.", @@ -97,7 +97,7 @@ "PublicDescription": "Counts all L2 HW prefetcher requests that hit L2.", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x50", + "UMask": "0xd0", "EventName": "L2_RQSTS.L2_PF_HIT", "SampleAfterValue": "200003", "BriefDescription": "L2 prefetch requests that hit L2 cache", @@ -610,7 +610,7 @@ "Errata": "HSD29, HSD25, HSM26, HSM30", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT", "SampleAfterValue": "20011", - "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache. ", + "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.", "CounterHTOff": "0,1,2,3", "Data_LA": "1" }, @@ -623,7 +623,7 @@ "Errata": "HSD29, HSD25, HSM26, HSM30", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM", "SampleAfterValue": "20011", - "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3. ", + "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.", "CounterHTOff": "0,1,2,3", "Data_LA": "1" }, @@ -792,7 +792,6 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "", "EventCode": "0xf4", "Counter": "0,1,2,3", "UMask": "0x10", @@ -802,262 +801,262 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts all requests that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all requests hit in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c8fff", + "MSRValue": "0x3F803C8FFF", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.L3_HIT.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all requests that hit in the L3", + "BriefDescription": "Counts all requests hit in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c07f7", + "MSRValue": "0x10003C07F7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "BriefDescription": "hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c07f7", + "MSRValue": "0x04003C07F7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "BriefDescription": "hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0244", + "MSRValue": "0x04003C0244", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "BriefDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0122", + "MSRValue": "0x10003C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0122", + "MSRValue": "0x04003C0122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0091", + "MSRValue": "0x10003C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0091", + "MSRValue": "0x04003C0091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0200", + "MSRValue": "0x3F803C0200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0100", + "MSRValue": "0x3F803C0100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads hit in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0080", + "MSRValue": "0x3F803C0080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads hit in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads hit in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0040", + "MSRValue": "0x3F803C0040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads hit in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs hit in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0020", + "MSRValue": "0x3F803C0020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs hit in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads hit in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3f803c0010", + "MSRValue": "0x3F803C0010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads hit in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0004", + "MSRValue": "0x10003C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "BriefDescription": "Counts all demand code reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0004", + "MSRValue": "0x04003C0004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "BriefDescription": "Counts all demand code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0002", + "MSRValue": "0x10003C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0002", + "MSRValue": "0x04003C0002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10003c0001", + "MSRValue": "0x10003C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "BriefDescription": "Counts demand data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04003c0001", + "MSRValue": "0x04003C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "BriefDescription": "Counts demand data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "Offcore": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/haswell/floating-point.json b/tools/perf/pmu-events/arch/x86/haswell/floating-point.json index f9843e5a9b42..f5a3beaa19fc 100644 --- a/tools/perf/pmu-events/arch/x86/haswell/floating-point.json +++ b/tools/perf/pmu-events/arch/x86/haswell/floating-point.json @@ -1,22 +1,26 @@ [ { + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC1", "Counter": "0,1,2,3", "UMask": "0x8", "Errata": "HSD56, HSM57", "EventName": "OTHER_ASSISTS.AVX_TO_SSE", "SampleAfterValue": "100003", - "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", + "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC1", "Counter": "0,1,2,3", "UMask": "0x10", "Errata": "HSD56, HSM57", "EventName": "OTHER_ASSISTS.SSE_TO_AVX", "SampleAfterValue": "100003", - "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", + "BriefDescription": "Number of transitions from legacy SSE to AVX-256 when penalty applicable", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -30,53 +34,58 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Number of X87 FP assists due to output values.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x2", "EventName": "FP_ASSIST.X87_OUTPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of X87 assists due to output value.", + "BriefDescription": "output - Numeric Overflow, Numeric Underflow, Inexact Result", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Number of X87 FP assists due to input values.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x4", "EventName": "FP_ASSIST.X87_INPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of X87 assists due to input value.", + "BriefDescription": "input - Invalid Operation, Denormal Operand, SNaN Operand", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Number of SIMD FP assists due to output values.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x8", "EventName": "FP_ASSIST.SIMD_OUTPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of SIMD FP assists due to Output values", + "BriefDescription": "SSE* FP micro-code assist when output value is invalid.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Number of SIMD FP assists due to input values.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x10", "EventName": "FP_ASSIST.SIMD_INPUT", "SampleAfterValue": "100003", - "BriefDescription": "Number of SIMD FP assists due to input values", + "BriefDescription": "Any input SSE* FP Assist", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Cycles with any input/output SSE* or FP assists.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x1e", "EventName": "FP_ASSIST.ANY", "SampleAfterValue": "100003", - "BriefDescription": "Cycles with any input/output SSE or FP assist", + "BriefDescription": "Counts any FP_ASSIST umask was incrementing", "CounterMask": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json b/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json index 5ab5c78fe580..21b27488b621 100644 --- a/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json +++ b/tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json @@ -1,158 +1,322 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { "MetricExpr": "min( 1 , IDQ.MITE_UOPS / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )", - "MetricGroup": "Frontend", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "( UOPS_EXECUTED.CORE / 2 / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@) ) if #SMT_on else UOPS_EXECUTED.CORE / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "( UOPS_EXECUTED.CORE / 2 / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@) ) if #SMT_on else UOPS_EXECUTED.CORE / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE.IFDATA_STALL - (( 14 * ITLB_MISSES.STLB_HIT + ITLB_MISSES.WALK_DURATION )) ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" }, { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( cpu@l1d_pend_miss.pending_cycles\\,any\\=1@ / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / cycles", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L3_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/haswell/memory.json b/tools/perf/pmu-events/arch/x86/haswell/memory.json index e5f9fa6655b3..ef13ed88e2ea 100644 --- a/tools/perf/pmu-events/arch/x86/haswell/memory.json +++ b/tools/perf/pmu-events/arch/x86/haswell/memory.json @@ -298,7 +298,7 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4", "MSRIndex": "0x3F6", "SampleAfterValue": "100003", - "BriefDescription": "Loads with latency value being above 4.", + "BriefDescription": "Randomly selected loads with latency value being above 4.", "TakenAlone": "1", "CounterHTOff": "3" }, @@ -312,7 +312,7 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8", "MSRIndex": "0x3F6", "SampleAfterValue": "50021", - "BriefDescription": "Loads with latency value being above 8.", + "BriefDescription": "Randomly selected loads with latency value being above 8.", "TakenAlone": "1", "CounterHTOff": "3" }, @@ -326,7 +326,7 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16", "MSRIndex": "0x3F6", "SampleAfterValue": "20011", - "BriefDescription": "Loads with latency value being above 16.", + "BriefDescription": "Randomly selected loads with latency value being above 16.", "TakenAlone": "1", "CounterHTOff": "3" }, @@ -340,7 +340,7 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32", "MSRIndex": "0x3F6", "SampleAfterValue": "100003", - "BriefDescription": "Loads with latency value being above 32.", + "BriefDescription": "Randomly selected loads with latency value being above 32.", "TakenAlone": "1", "CounterHTOff": "3" }, @@ -354,7 +354,7 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64", "MSRIndex": "0x3F6", "SampleAfterValue": "2003", - "BriefDescription": "Loads with latency value being above 64.", + "BriefDescription": "Randomly selected loads with latency value being above 64.", "TakenAlone": "1", "CounterHTOff": "3" }, @@ -368,7 +368,7 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128", "MSRIndex": "0x3F6", "SampleAfterValue": "1009", - "BriefDescription": "Loads with latency value being above 128.", + "BriefDescription": "Randomly selected loads with latency value being above 128.", "TakenAlone": "1", "CounterHTOff": "3" }, @@ -382,7 +382,7 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256", "MSRIndex": "0x3F6", "SampleAfterValue": "503", - "BriefDescription": "Loads with latency value being above 256.", + "BriefDescription": "Randomly selected loads with latency value being above 256.", "TakenAlone": "1", "CounterHTOff": "3" }, @@ -396,280 +396,280 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512", "MSRIndex": "0x3F6", "SampleAfterValue": "101", - "BriefDescription": "Loads with latency value being above 512.", + "BriefDescription": "Randomly selected loads with latency value being above 512.", "TakenAlone": "1", "CounterHTOff": "3" }, { - "PublicDescription": "Counts all requests that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all requests miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc08fff", + "MSRValue": "0x3FFFC08FFF", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all requests that miss in the L3", + "BriefDescription": "Counts all requests miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "miss the L3 and the data is returned from local dram", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01004007f7", + "MSRValue": "0x01004007F7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.LOCAL_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram", + "BriefDescription": "miss the L3 and the data is returned from local dram", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc007f7", + "MSRValue": "0x3FFFC007F7", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3", + "BriefDescription": "miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram", "EventCode": "0xB7, 0xBB", "MSRValue": "0x0100400244", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.L3_MISS.LOCAL_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00244", + "MSRValue": "0x3FFFC00244", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch code reads that miss in the L3", + "BriefDescription": "Counts all demand & prefetch code reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram", "EventCode": "0xB7, 0xBB", "MSRValue": "0x0100400122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.LOCAL_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00122", + "MSRValue": "0x3FFFC00122", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch RFOs that miss in the L3", + "BriefDescription": "Counts all demand & prefetch RFOs miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram", "EventCode": "0xB7, 0xBB", "MSRValue": "0x0100400091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.LOCAL_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand & prefetch data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00091", + "MSRValue": "0x3FFFC00091", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch data reads that miss in the L3", + "BriefDescription": "Counts all demand & prefetch data reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00200", + "MSRValue": "0x3FFFC00200", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00100", + "MSRValue": "0x3FFFC00100", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00080", + "MSRValue": "0x3FFFC00080", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00040", + "MSRValue": "0x3FFFC00040", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss in the L3", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00020", + "MSRValue": "0x3FFFC00020", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00010", + "MSRValue": "0x3FFFC00010", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads miss the L3 and the data is returned from local dram", "EventCode": "0xB7, 0xBB", "MSRValue": "0x0100400004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.LOCAL_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand code reads miss the L3 and the data is returned from local dram", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00004", + "MSRValue": "0x3FFFC00004", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand code reads that miss in the L3", + "BriefDescription": "Counts all demand code reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) miss the L3 and the data is returned from local dram", "EventCode": "0xB7, 0xBB", "MSRValue": "0x0100400002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.LOCAL_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand data writes (RFOs) miss the L3 and the data is returned from local dram", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts all demand data writes (RFOs) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00002", + "MSRValue": "0x3FFFC00002", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data writes (RFOs) that miss in the L3", + "BriefDescription": "Counts all demand data writes (RFOs) miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads miss the L3 and the data is returned from local dram", "EventCode": "0xB7, 0xBB", "MSRValue": "0x0100400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.LOCAL_DRAM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts demand data reads miss the L3 and the data is returned from local dram", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads miss in the L3", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fffc00001", + "MSRValue": "0x3FFFC00001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that miss in the L3", + "BriefDescription": "Counts demand data reads miss in the L3", "Offcore": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/haswell/pipeline.json b/tools/perf/pmu-events/arch/x86/haswell/pipeline.json index a4dcfce4a512..734d3873729e 100644 --- a/tools/perf/pmu-events/arch/x86/haswell/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/haswell/pipeline.json @@ -1,7 +1,6 @@ [ { "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. INST_RETIRED.ANY is counted by a designated fixed counter, leaving the programmable counters available for other events. Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.", - "EventCode": "0x00", "Counter": "Fixed counter 0", "UMask": "0x1", "Errata": "HSD140, HSD143", @@ -12,7 +11,6 @@ }, { "PublicDescription": "This event counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", @@ -21,7 +19,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "AnyThread": "1", @@ -32,7 +29,6 @@ }, { "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state.", - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", @@ -1071,7 +1067,8 @@ "CounterHTOff": "1" }, { - "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts FP operations retired. For X87 FP operations that have no exceptions counting also includes flows that have several X87, or flows that use X87 uops in the exception handling.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts FP operations retired. For X87 FP operations that have no exceptions counting also includes flows that have several X87, or flows that use X87 uops in the exception handling.", "EventCode": "0xC0", "Counter": "0,1,2,3", "UMask": "0x2", @@ -1081,13 +1078,13 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Number of microcode assists invoked by HW upon uop writeback.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC1", "Counter": "0,1,2,3", "UMask": "0x40", "EventName": "OTHER_ASSISTS.ANY_WB_ASSIST", "SampleAfterValue": "100003", - "BriefDescription": "Number of times any microcode assist is invoked by HW upon uop writeback.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -1102,28 +1099,34 @@ "Data_LA": "1" }, { + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC2", "Invert": "1", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "UOPS_RETIRED.STALL_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles without actually retired uops.", + "BriefDescription": "Cycles no executable uops retired", "CounterMask": "1", "CounterHTOff": "0,1,2,3" }, { + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC2", "Invert": "1", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "UOPS_RETIRED.TOTAL_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles with less than 10 actually retired uops.", + "BriefDescription": "Number of cycles using always true condition applied to PEBS uops retired event.", "CounterMask": "10", "CounterHTOff": "0,1,2,3" }, { + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC2", "Invert": "1", "Counter": "0,1,2,3", @@ -1131,7 +1134,7 @@ "AnyThread": "1", "EventName": "UOPS_RETIRED.CORE_STALL_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles without actually retired uops.", + "BriefDescription": "Cycles no executable uops retired on core", "CounterMask": "1", "CounterHTOff": "0,1,2,3" }, @@ -1245,13 +1248,14 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts the number of not taken branch instructions retired.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x10", "EventName": "BR_INST_RETIRED.NOT_TAKEN", "SampleAfterValue": "400009", - "BriefDescription": "Not taken branch instructions retired.", + "BriefDescription": "Counts all not taken macro branch instructions retired.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -1265,13 +1269,14 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Number of far branches retired.", + "PEBS": "1", + "PublicDescription": "", "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x40", "EventName": "BR_INST_RETIRED.FAR_BRANCH", "SampleAfterValue": "100003", - "BriefDescription": "Far branch instructions retired.", + "BriefDescription": "Counts the number of far branch instructions retired.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { diff --git a/tools/perf/pmu-events/arch/x86/haswellx/cache.json b/tools/perf/pmu-events/arch/x86/haswellx/cache.json index b2fbd617306a..a9e62d4357af 100644 --- a/tools/perf/pmu-events/arch/x86/haswellx/cache.json +++ b/tools/perf/pmu-events/arch/x86/haswellx/cache.json @@ -64,18 +64,18 @@ }, { "EventCode": "0x24", - "UMask": "0x41", + "UMask": "0xc1", "BriefDescription": "Demand Data Read requests that hit L2 cache", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "Errata": "HSD78", - "PublicDescription": "Demand data read requests that hit L2 cache.", + "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache", "SampleAfterValue": "200003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x24", - "UMask": "0x42", + "UMask": "0xc2", "BriefDescription": "RFO requests that hit L2 cache", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.RFO_HIT", @@ -85,7 +85,7 @@ }, { "EventCode": "0x24", - "UMask": "0x44", + "UMask": "0xc4", "BriefDescription": "L2 cache hits when fetching instructions, code reads.", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.CODE_RD_HIT", @@ -95,7 +95,7 @@ }, { "EventCode": "0x24", - "UMask": "0x50", + "UMask": "0xd0", "BriefDescription": "L2 prefetch requests that hit L2 cache", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.L2_PF_HIT", @@ -416,7 +416,7 @@ { "EventCode": "0xD0", "UMask": "0x11", - "BriefDescription": "Retired load uops that miss the STLB. (precise Event)", + "BriefDescription": "Retired load uops that miss the STLB.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -428,7 +428,7 @@ { "EventCode": "0xD0", "UMask": "0x12", - "BriefDescription": "Retired store uops that miss the STLB. (precise Event)", + "BriefDescription": "Retired store uops that miss the STLB.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -441,7 +441,7 @@ { "EventCode": "0xD0", "UMask": "0x21", - "BriefDescription": "Retired load uops with locked access. (precise Event)", + "BriefDescription": "Retired load uops with locked access.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -453,34 +453,32 @@ { "EventCode": "0xD0", "UMask": "0x41", - "BriefDescription": "Retired load uops that split across a cacheline boundary. (precise Event)", + "BriefDescription": "Retired load uops that split across a cacheline boundary.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "Errata": "HSD29, HSM30", - "PublicDescription": "This event counts load uops retired which had memory addresses spilt across 2 cache lines. A line split is across 64B cache-lines which may include a page split (4K). This is a precise event.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD0", "UMask": "0x42", - "BriefDescription": "Retired store uops that split across a cacheline boundary. (precise Event)", + "BriefDescription": "Retired store uops that split across a cacheline boundary.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "Errata": "HSD29, HSM30", "L1_Hit_Indication": "1", - "PublicDescription": "This event counts store uops retired which had memory addresses spilt across 2 cache lines. A line split is across 64B cache-lines which may include a page split (4K). This is a precise event.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD0", "UMask": "0x81", - "BriefDescription": "All retired load uops. (precise Event)", + "BriefDescription": "All retired load uops.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -492,14 +490,13 @@ { "EventCode": "0xD0", "UMask": "0x82", - "BriefDescription": "All retired store uops. (precise Event)", + "BriefDescription": "All retired store uops.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "Errata": "HSD29, HSM30", "L1_Hit_Indication": "1", - "PublicDescription": "This event counts all store uops retired. This is a precise event.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3" }, @@ -530,13 +527,13 @@ { "EventCode": "0xD1", "UMask": "0x4", - "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.", + "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", - "PublicDescription": "This event counts retired load uops in which data sources were data hits in the L3 cache without snoops required. This does not include hardware prefetches. This is a precise event.", + "PublicDescription": "Retired load uops with L3 cache hits as data sources.", "SampleAfterValue": "50021", "CounterHTOff": "0,1,2,3" }, @@ -549,19 +546,20 @@ "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", "Errata": "HSM30", - "PublicDescription": "This event counts retired load uops in which data sources missed in the L1 cache. This does not include hardware prefetches. This is a precise event.", + "PublicDescription": "Retired load uops missed L1 cache as data sources.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD1", "UMask": "0x10", - "BriefDescription": "Retired load uops with L2 cache misses as data sources.", + "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", "Errata": "HSD29, HSM30", + "PublicDescription": "Retired load uops missed L2. Unknown data source excluded.", "SampleAfterValue": "50021", "CounterHTOff": "0,1,2,3" }, @@ -574,6 +572,7 @@ "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_RETIRED.L3_MISS", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", + "PublicDescription": "Retired load uops missed L3. Excludes unknown data source .", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -604,26 +603,24 @@ { "EventCode": "0xD2", "UMask": "0x2", - "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache. ", + "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT", "Errata": "HSD29, HSD25, HSM26, HSM30", - "PublicDescription": "This event counts retired load uops that hit in the L3 cache, but required a cross-core snoop which resulted in a HIT in an on-pkg core cache. This does not include hardware prefetches. This is a precise event.", "SampleAfterValue": "20011", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD2", "UMask": "0x4", - "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3. ", + "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM", "Errata": "HSD29, HSD25, HSM26, HSM30", - "PublicDescription": "This event counts retired load uops that hit in the L3 cache, but required a cross-core snoop which resulted in a HITM (hit modified) in an on-pkg core cache. This does not include hardware prefetches. This is a precise event.", "SampleAfterValue": "20011", "CounterHTOff": "0,1,2,3" }, @@ -642,19 +639,20 @@ { "EventCode": "0xD3", "UMask": "0x1", + "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM", "Errata": "HSD74, HSD29, HSD25, HSM30", - "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches. This is a precise event.", + "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xD3", "UMask": "0x4", - "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI) (Precise Event)", + "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI)", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -666,7 +664,7 @@ { "EventCode": "0xD3", "UMask": "0x10", - "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM (Precise Event)", + "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -678,7 +676,7 @@ { "EventCode": "0xD3", "UMask": "0x20", - "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache (Precise Event)", + "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache", "Data_LA": "1", "PEBS": "1", "Counter": "0,1,2,3", @@ -833,7 +831,6 @@ "BriefDescription": "Split locks in SQ", "Counter": "0,1,2,3", "EventName": "SQ_MISC.SPLIT_LOCK", - "PublicDescription": "", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -841,12 +838,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0001", + "BriefDescription": "Counts demand data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -854,12 +851,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0001", + "BriefDescription": "Counts demand data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -867,12 +864,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0002", + "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -880,12 +877,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0002", + "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -893,12 +890,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0004", + "BriefDescription": "Counts all demand code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -906,12 +903,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0004", + "BriefDescription": "Counts all demand code reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -919,12 +916,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3", - "MSRValue": "0x3f803c0010", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads hit in the L3", + "MSRValue": "0x3F803C0010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -932,12 +929,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3", - "MSRValue": "0x3f803c0020", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs hit in the L3", + "MSRValue": "0x3F803C0020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -945,12 +942,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3", - "MSRValue": "0x3f803c0040", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads hit in the L3", + "MSRValue": "0x3F803C0040", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -958,12 +955,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3", - "MSRValue": "0x3f803c0080", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads hit in the L3", + "MSRValue": "0x3F803C0080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -971,12 +968,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3", - "MSRValue": "0x3f803c0100", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3", + "MSRValue": "0x3F803C0100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -984,12 +981,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3", - "MSRValue": "0x3f803c0200", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3", + "MSRValue": "0x3F803C0200", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -997,12 +994,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0091", + "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1010,12 +1007,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0091", + "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1023,12 +1020,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0122", + "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1036,12 +1033,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c0122", + "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C0122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1049,12 +1046,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c0244", + "BriefDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C0244", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1062,12 +1059,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "MSRValue": "0x04003c07f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", + "MSRValue": "0x04003C07F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1075,12 +1072,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "MSRValue": "0x10003c07f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", + "MSRValue": "0x10003C07F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1088,12 +1085,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all requests that hit in the L3", - "MSRValue": "0x3f803c8fff", + "BriefDescription": "Counts all requests hit in the L3", + "MSRValue": "0x3F803C8FFF", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all requests that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all requests hit in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json b/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json index 5ab5c78fe580..e5aac148c941 100644 --- a/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json +++ b/tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json @@ -1,158 +1,340 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { "MetricExpr": "min( 1 , IDQ.MITE_UOPS / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )", - "MetricGroup": "Frontend", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "( UOPS_EXECUTED.CORE / 2 / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@) ) if #SMT_on else UOPS_EXECUTED.CORE / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "( UOPS_EXECUTED.CORE / 2 / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@) ) if #SMT_on else UOPS_EXECUTED.CORE / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE.IFDATA_STALL - (( 14 * ITLB_MISSES.STLB_HIT + ITLB_MISSES.WALK_DURATION )) ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" }, { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( cpu@l1d_pend_miss.pending_cycles\\,any\\=1@ / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / cycles", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L3_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { + "MetricExpr": "1000000000 * ( cbox@event\\=0x36\\,umask\\=0x3\\,filter_opc\\=0x182@ / cbox@event\\=0x35\\,umask\\=0x3\\,filter_opc\\=0x182@ ) / ( cbox_0@event\\=0x0@ / duration_time )", + "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_Lat", + "MetricName": "DRAM_Read_Latency" + }, + { + "MetricExpr": "cbox@event\\=0x36\\,umask\\=0x3\\,filter_opc\\=0x182@ / cbox@event\\=0x36\\,umask\\=0x3\\,filter_opc\\=0x182\\,thresh\\=1@", + "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_Parallel_Reads" + }, + { + "MetricExpr": "cbox_0@event\\=0x0@", + "BriefDescription": "Socket actual clocks when any core is active on that socket", + "MetricGroup": "", + "MetricName": "Socket_CLKS" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/haswellx/memory.json b/tools/perf/pmu-events/arch/x86/haswellx/memory.json index 56b0f24b8029..a42d5ce86b6f 100644 --- a/tools/perf/pmu-events/arch/x86/haswellx/memory.json +++ b/tools/perf/pmu-events/arch/x86/haswellx/memory.json @@ -291,7 +291,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 4.", + "BriefDescription": "Randomly selected loads with latency value being above 4.", "PEBS": "2", "MSRValue": "0x4", "Counter": "3", @@ -305,7 +305,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 8.", + "BriefDescription": "Randomly selected loads with latency value being above 8.", "PEBS": "2", "MSRValue": "0x8", "Counter": "3", @@ -319,7 +319,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 16.", + "BriefDescription": "Randomly selected loads with latency value being above 16.", "PEBS": "2", "MSRValue": "0x10", "Counter": "3", @@ -333,7 +333,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 32.", + "BriefDescription": "Randomly selected loads with latency value being above 32.", "PEBS": "2", "MSRValue": "0x20", "Counter": "3", @@ -347,7 +347,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 64.", + "BriefDescription": "Randomly selected loads with latency value being above 64.", "PEBS": "2", "MSRValue": "0x40", "Counter": "3", @@ -361,7 +361,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 128.", + "BriefDescription": "Randomly selected loads with latency value being above 128.", "PEBS": "2", "MSRValue": "0x80", "Counter": "3", @@ -375,7 +375,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 256.", + "BriefDescription": "Randomly selected loads with latency value being above 256.", "PEBS": "2", "MSRValue": "0x100", "Counter": "3", @@ -389,7 +389,7 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Loads with latency value being above 512.", + "BriefDescription": "Randomly selected loads with latency value being above 512.", "PEBS": "2", "MSRValue": "0x200", "Counter": "3", @@ -404,12 +404,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss in the L3", - "MSRValue": "0x3fbfc00001", + "BriefDescription": "Counts demand data reads miss in the L3", + "MSRValue": "0x3FBFC00001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -417,12 +417,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts demand data reads miss the L3 and the data is returned from local dram", "MSRValue": "0x0600400001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -430,12 +430,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss in the L3", - "MSRValue": "0x3fbfc00002", + "BriefDescription": "Counts all demand data writes (RFOs) miss in the L3", + "MSRValue": "0x3FBFC00002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -443,12 +443,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand data writes (RFOs) miss the L3 and the data is returned from local dram", "MSRValue": "0x0600400002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -456,12 +456,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache", - "MSRValue": "0x103fc00002", + "BriefDescription": "Counts all demand data writes (RFOs) miss the L3 and the modified data is transferred from remote cache", + "MSRValue": "0x103FC00002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.REMOTE_HITM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand data writes (RFOs) miss the L3 and the modified data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -469,12 +469,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss in the L3", - "MSRValue": "0x3fbfc00004", + "BriefDescription": "Counts all demand code reads miss in the L3", + "MSRValue": "0x3FBFC00004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -482,12 +482,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand code reads miss the L3 and the data is returned from local dram", "MSRValue": "0x0600400004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand code reads miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -495,12 +495,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3", - "MSRValue": "0x3fbfc00010", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads miss in the L3", + "MSRValue": "0x3FBFC00010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -508,12 +508,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3", - "MSRValue": "0x3fbfc00020", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs miss in the L3", + "MSRValue": "0x3FBFC00020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -521,12 +521,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss in the L3", - "MSRValue": "0x3fbfc00040", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads miss in the L3", + "MSRValue": "0x3FBFC00040", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) code reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -534,12 +534,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3", - "MSRValue": "0x3fbfc00080", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads miss in the L3", + "MSRValue": "0x3FBFC00080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -547,12 +547,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3", - "MSRValue": "0x3fbfc00100", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3", + "MSRValue": "0x3FBFC00100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -560,12 +560,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3", - "MSRValue": "0x3fbfc00200", + "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3", + "MSRValue": "0x3FBFC00200", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -573,12 +573,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss in the L3", - "MSRValue": "0x3fbfc00091", + "BriefDescription": "Counts all demand & prefetch data reads miss in the L3", + "MSRValue": "0x3FBFC00091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -586,12 +586,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram", "MSRValue": "0x0600400091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -599,12 +599,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram", - "MSRValue": "0x063f800091", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from remote dram", + "MSRValue": "0x063F800091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from remote dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -612,12 +612,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache", - "MSRValue": "0x103fc00091", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the modified data is transferred from remote cache", + "MSRValue": "0x103FC00091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_HITM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the modified data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -625,12 +625,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache", - "MSRValue": "0x083fc00091", + "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and clean or shared data is transferred from remote cache", + "MSRValue": "0x083FC00091", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_HIT_FORWARD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and clean or shared data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -638,12 +638,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss in the L3", - "MSRValue": "0x3fbfc00122", + "BriefDescription": "Counts all demand & prefetch RFOs miss in the L3", + "MSRValue": "0x3FBFC00122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -651,12 +651,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram", "MSRValue": "0x0600400122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -664,12 +664,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch code reads that miss in the L3", - "MSRValue": "0x3fbfc00244", + "BriefDescription": "Counts all demand & prefetch code reads miss in the L3", + "MSRValue": "0x3FBFC00244", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -677,12 +677,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram", + "BriefDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram", "MSRValue": "0x0600400244", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -690,12 +690,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3", - "MSRValue": "0x3fbfc007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss in the L3", + "MSRValue": "0x3FBFC007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -703,12 +703,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram", - "MSRValue": "0x06004007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from local dram", + "MSRValue": "0x06004007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.LOCAL_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from local dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -716,12 +716,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from remote dram", - "MSRValue": "0x063f8007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from remote dram", + "MSRValue": "0x063F8007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_DRAM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from remote dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from remote dram", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -729,12 +729,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the modified data is transferred from remote cache", - "MSRValue": "0x103fc007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the modified data is transferred from remote cache", + "MSRValue": "0x103FC007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HITM", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the modified data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -742,12 +742,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and clean or shared data is transferred from remote cache", - "MSRValue": "0x083fc007f7", + "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and clean or shared data is transferred from remote cache", + "MSRValue": "0x083FC007F7", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HIT_FORWARD", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and clean or shared data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and clean or shared data is transferred from remote cache", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -755,12 +755,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all requests that miss in the L3", - "MSRValue": "0x3fbfc08fff", + "BriefDescription": "Counts all requests miss in the L3", + "MSRValue": "0x3FBFC08FFF", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_MISS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all requests that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts all requests miss in the L3", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/haswellx/pipeline.json b/tools/perf/pmu-events/arch/x86/haswellx/pipeline.json index 8a18bfe9e3e4..26f2888341ee 100644 --- a/tools/perf/pmu-events/arch/x86/haswellx/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/haswellx/pipeline.json @@ -1,6 +1,5 @@ [ { - "EventCode": "0x00", "UMask": "0x1", "BriefDescription": "Instructions retired from execution.", "Counter": "Fixed counter 0", @@ -11,7 +10,6 @@ "CounterHTOff": "Fixed counter 0" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when the thread is not in halt state.", "Counter": "Fixed counter 1", @@ -21,7 +19,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", "Counter": "Fixed counter 1", @@ -31,7 +28,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x3", "BriefDescription": "Reference cycles when the core is not in halt state.", "Counter": "Fixed counter 2", @@ -1098,6 +1094,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "UOPS_RETIRED.ALL", + "PublicDescription": "Counts the number of micro-ops retired. Use Cmask=1 and invert to count active cycles or stalled cycles.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1142,6 +1139,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "UOPS_RETIRED.RETIRE_SLOTS", + "PublicDescription": "This event counts the number of retirement slots used each cycle. There are potentially 4 slots that can be used each cycle - meaning, 4 uops or 4 instructions could retire each cycle.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1201,6 +1199,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.CONDITIONAL", + "PublicDescription": "Counts the number of conditional branch instructions retired.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1241,6 +1240,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.NEAR_RETURN", + "PublicDescription": "Counts the number of near return instructions retired.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1261,6 +1261,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.NEAR_TAKEN", + "PublicDescription": "Number of near taken branches retired.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -1312,6 +1313,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_MISP_RETIRED.NEAR_TAKEN", + "PublicDescription": "Number of near branch instructions retired that were taken but mispredicted.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/cache.json b/tools/perf/pmu-events/arch/x86/ivybridge/cache.json index 999a01bc6467..5f6cb2abc384 100644 --- a/tools/perf/pmu-events/arch/x86/ivybridge/cache.json +++ b/tools/perf/pmu-events/arch/x86/ivybridge/cache.json @@ -1012,7 +1012,7 @@ "EventName": "OFFCORE_RESPONSE.SPLIT_LOCK_UC_LOCK.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts requests where the address of an atomic lock instruction spans a cache line boundary or the lock instruction is executed on uncacheable address ", + "BriefDescription": "Counts requests where the address of an atomic lock instruction spans a cache line boundary or the lock instruction is executed on uncacheable address", "CounterHTOff": "0,1,2,3" }, { @@ -1036,7 +1036,7 @@ "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand data reads ", + "BriefDescription": "Counts all demand data reads", "CounterHTOff": "0,1,2,3" }, { @@ -1048,7 +1048,7 @@ "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand rfo's ", + "BriefDescription": "Counts all demand rfo's", "CounterHTOff": "0,1,2,3" }, { @@ -1084,7 +1084,7 @@ "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all demand & prefetch prefetch RFOs ", + "BriefDescription": "Counts all demand & prefetch prefetch RFOs", "CounterHTOff": "0,1,2,3" }, { @@ -1096,7 +1096,7 @@ "EventName": "OFFCORE_RESPONSE.ALL_READS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts all data/code/rfo references (demand & prefetch) ", + "BriefDescription": "Counts all data/code/rfo references (demand & prefetch)", "CounterHTOff": "0,1,2,3" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json b/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json index 7c2679514efb..bc4d5fc284a0 100644 --- a/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json +++ b/tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json @@ -1,164 +1,340 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", - "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4) )", - "MetricGroup": "Frontend", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { + "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4 ) )", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE.IFETCH_STALL ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" }, { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( cpu@l1d_pend_miss.pending_cycles\\,any\\=1@ / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / cycles", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.LLC_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2* FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4*( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8* SIMD_FP_256.PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json b/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json index 0afbfd95ea30..2a0aad91d83d 100644 --- a/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json @@ -1,6 +1,5 @@ [ { - "EventCode": "0x00", "Counter": "Fixed counter 0", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -9,7 +8,6 @@ "CounterHTOff": "Fixed counter 0" }, { - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", @@ -19,7 +17,6 @@ }, { "PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "AnyThread": "1", @@ -29,7 +26,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", diff --git a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json index 7c2679514efb..f3874b5f9995 100644 --- a/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json +++ b/tools/perf/pmu-events/arch/x86/ivytown/ivt-metrics.json @@ -1,164 +1,346 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", - "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4) )", - "MetricGroup": "Frontend", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { + "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4 ) )", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_UOPS_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_EXECUTED.THREAD / (( cpu@UOPS_EXECUTED.CORE\\,cmask\\=1@ / 2) if #SMT_on else UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE.IFETCH_STALL ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" }, { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_UOPS_RETIRED.L1_MISS + mem_load_uops_retired.hit_lfb )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( cpu@l1d_pend_miss.pending_cycles\\,any\\=1@ / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / cycles", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_DURATION + DTLB_LOAD_MISSES.WALK_DURATION + DTLB_STORE_MISSES.WALK_DURATION ) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_UOPS_RETIRED.LLC_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2* FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4*( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8* SIMD_FP_256.PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { + "MetricExpr": "cbox_0@event\\=0x0@", + "BriefDescription": "Socket actual clocks when any core is active on that socket", + "MetricGroup": "", + "MetricName": "Socket_CLKS" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json index 0afbfd95ea30..2a0aad91d83d 100644 --- a/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/ivytown/pipeline.json @@ -1,6 +1,5 @@ [ { - "EventCode": "0x00", "Counter": "Fixed counter 0", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -9,7 +8,6 @@ "CounterHTOff": "Fixed counter 0" }, { - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", @@ -19,7 +17,6 @@ }, { "PublicDescription": "Core cycles when at least one thread on the physical core is not in halt state.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "AnyThread": "1", @@ -29,7 +26,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", diff --git a/tools/perf/pmu-events/arch/x86/jaketown/cache.json b/tools/perf/pmu-events/arch/x86/jaketown/cache.json index ee22e4a5e30d..52dc6ef40e63 100644 --- a/tools/perf/pmu-events/arch/x86/jaketown/cache.json +++ b/tools/perf/pmu-events/arch/x86/jaketown/cache.json @@ -31,7 +31,7 @@ }, { "PEBS": "1", - "PublicDescription": "This event counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "EventCode": "0xD0", "Counter": "0,1,2,3", "UMask": "0x41", @@ -42,7 +42,7 @@ }, { "PEBS": "1", - "PublicDescription": "This event counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", + "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", "EventCode": "0xD0", "Counter": "0,1,2,3", "UMask": "0x42", @@ -179,7 +179,7 @@ "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "This event counts L1D data line replacements. Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier. ", + "PublicDescription": "This event counts L1D data line replacements. Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier.", "EventCode": "0x51", "Counter": "0,1,2,3", "UMask": "0x1", diff --git a/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json b/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json index fd7d7c438226..98c73e430b05 100644 --- a/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json +++ b/tools/perf/pmu-events/arch/x86/jaketown/jkt-metrics.json @@ -1,140 +1,232 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", - "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4) )", - "MetricGroup": "Frontend", + "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4 ) )", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_DISPATCHED.THREAD / (( cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_DISPATCHED.THREAD / (( cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@ / 2) if #SMT_on else cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Average CPU Utilization", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2* FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4*( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8* SIMD_FP_256.PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { + "MetricExpr": "cbox_0@event\\=0x0@", + "BriefDescription": "Socket actual clocks when any core is active on that socket", + "MetricGroup": "", + "MetricName": "Socket_CLKS" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json index 34a519d9bfa0..783a5b4a67b1 100644 --- a/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/jaketown/pipeline.json @@ -1,7 +1,6 @@ [ { - "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. ", - "EventCode": "0x00", + "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers.", "Counter": "Fixed counter 1", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -10,8 +9,7 @@ "CounterHTOff": "Fixed counter 1" }, { - "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. ", - "EventCode": "0x00", + "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.", "Counter": "Fixed counter 2", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", @@ -20,8 +18,7 @@ "CounterHTOff": "Fixed counter 2" }, { - "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. ", - "EventCode": "0x00", + "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.", "Counter": "Fixed counter 3", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", @@ -778,7 +775,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceding smaller uncompleted store. See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.", + "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceeding smaller uncompleted store. See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.", "EventCode": "0x03", "Counter": "0,1,2,3", "UMask": "0x2", @@ -1098,7 +1095,6 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x2", "AnyThread": "1", diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/cache.json b/tools/perf/pmu-events/arch/x86/knightslanding/cache.json index e434ec723001..e847b0fd696d 100644 --- a/tools/perf/pmu-events/arch/x86/knightslanding/cache.json +++ b/tools/perf/pmu-events/arch/x86/knightslanding/cache.json @@ -32,16 +32,16 @@ "BriefDescription": "Counts the number of L2 cache misses" }, { - "PublicDescription": "This event counts the number of core cycles the fetch stalls because of an icache miss. This is a cumulative count of cycles the NIP stalled for all icache misses. ", + "PublicDescription": "This event counts the number of core cycles the fetch stalls because of an icache miss. This is a cumulative count of cycles the NIP stalled for all icache misses.", "EventCode": "0x86", "Counter": "0,1", "UMask": "0x4", "EventName": "FETCH_STALL.ICACHE_FILL_PENDING_CYCLES", "SampleAfterValue": "200003", - "BriefDescription": "Counts the number of core cycles the fetch stalls because of an icache miss. This is a cummulative count of core cycles the fetch stalled for all icache misses. " + "BriefDescription": "Counts the number of core cycles the fetch stalls because of an icache miss. This is a cummulative count of core cycles the fetch stalled for all icache misses." }, { - "PublicDescription": "This event counts the number of load micro-ops retired that miss in L1 Data cache. Note that prefetch misses will not be counted. ", + "PublicDescription": "This event counts the number of load micro-ops retired that miss in L1 Data cache. Note that prefetch misses will not be counted.", "EventCode": "0x04", "Counter": "0,1", "UMask": "0x1", @@ -115,29 +115,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000070 ", + "MSRValue": "0x4000000070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts any Prefetch requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400070 ", + "MSRValue": "0x1000400070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts any Prefetch requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400070 ", + "MSRValue": "0x0800400070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_FAR_TILE_E_F", @@ -148,29 +148,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080070 ", + "MSRValue": "0x1000080070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts any Prefetch requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080070 ", + "MSRValue": "0x0800080070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts any Prefetch requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010070 ", + "MSRValue": "0x0000010070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.ANY_RESPONSE", @@ -181,29 +181,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x40000032f7 ", + "MSRValue": "0x40000032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts any Read request that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x10004032f7 ", + "MSRValue": "0x10004032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts any Read request that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x08004032f7 ", + "MSRValue": "0x08004032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_FAR_TILE_E_F", @@ -214,29 +214,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x10000832f7 ", + "MSRValue": "0x10000832f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts any Read request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x08000832f7 ", + "MSRValue": "0x08000832f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts any Read request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x00000132f7 ", + "MSRValue": "0x00000132f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.ANY_RESPONSE", @@ -247,29 +247,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000044 ", + "MSRValue": "0x4000000044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400044 ", + "MSRValue": "0x1000400044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400044 ", + "MSRValue": "0x0800400044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_FAR_TILE_E_F", @@ -280,29 +280,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080044 ", + "MSRValue": "0x1000080044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080044 ", + "MSRValue": "0x0800080044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010044 ", + "MSRValue": "0x0000010044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.ANY_RESPONSE", @@ -313,29 +313,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000022 ", + "MSRValue": "0x4000000022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts Demand cacheable data write requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400022 ", + "MSRValue": "0x1000400022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400022 ", + "MSRValue": "0x0800400022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_FAR_TILE_E_F", @@ -346,29 +346,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080022 ", + "MSRValue": "0x1000080022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080022 ", + "MSRValue": "0x0800080022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010022 ", + "MSRValue": "0x0000010022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.ANY_RESPONSE", @@ -379,29 +379,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000003091 ", + "MSRValue": "0x4000003091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000403091 ", + "MSRValue": "0x1000403091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800403091 ", + "MSRValue": "0x0800403091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_FAR_TILE_E_F", @@ -412,29 +412,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000083091 ", + "MSRValue": "0x1000083091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800083091 ", + "MSRValue": "0x0800083091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000013091 ", + "MSRValue": "0x0000013091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.ANY_RESPONSE", @@ -445,29 +445,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000008000 ", + "MSRValue": "0x4000008000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts any request that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000408000 ", + "MSRValue": "0x1000408000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts any request that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800408000 ", + "MSRValue": "0x0800408000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_FAR_TILE_E_F", @@ -478,29 +478,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000088000 ", + "MSRValue": "0x1000088000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts any request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800088000 ", + "MSRValue": "0x0800088000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts any request that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000018000 ", + "MSRValue": "0x0000018000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.ANY_RESPONSE", @@ -511,7 +511,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0000014800 ", + "MSRValue": "0x0000014800", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.ANY_RESPONSE", @@ -522,7 +522,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0000014000 ", + "MSRValue": "0x0000014000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.ANY_RESPONSE", @@ -533,29 +533,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000002000 ", + "MSRValue": "0x4000002000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts L1 data HW prefetches that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000402000 ", + "MSRValue": "0x1000402000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800402000 ", + "MSRValue": "0x0800402000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_FAR_TILE_E_F", @@ -566,29 +566,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000082000 ", + "MSRValue": "0x1000082000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800082000 ", + "MSRValue": "0x0800082000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000012000 ", + "MSRValue": "0x0000012000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.ANY_RESPONSE", @@ -599,29 +599,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000001000 ", + "MSRValue": "0x4000001000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts Software Prefetches that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000401000 ", + "MSRValue": "0x1000401000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Software Prefetches that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800401000 ", + "MSRValue": "0x0800401000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_FAR_TILE_E_F", @@ -632,29 +632,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000081000 ", + "MSRValue": "0x1000081000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Software Prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800081000 ", + "MSRValue": "0x0800081000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Software Prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000011000 ", + "MSRValue": "0x0000011000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.ANY_RESPONSE", @@ -665,7 +665,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0000010800 ", + "MSRValue": "0x0000010800", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.ANY_RESPONSE", @@ -676,29 +676,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000400 ", + "MSRValue": "0x4000000400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts Bus locks and split lock requests that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400400 ", + "MSRValue": "0x1000400400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400400 ", + "MSRValue": "0x0800400400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_FAR_TILE_E_F", @@ -709,29 +709,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080400 ", + "MSRValue": "0x1000080400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080400 ", + "MSRValue": "0x0800080400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010400 ", + "MSRValue": "0x0000010400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.ANY_RESPONSE", @@ -742,29 +742,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000200 ", + "MSRValue": "0x4000000200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400200 ", + "MSRValue": "0x1000400200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400200 ", + "MSRValue": "0x0800400200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_FAR_TILE_E_F", @@ -775,29 +775,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080200 ", + "MSRValue": "0x1000080200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080200 ", + "MSRValue": "0x0800080200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010200 ", + "MSRValue": "0x0000010200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.ANY_RESPONSE", @@ -808,18 +808,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000400100 ", + "MSRValue": "0x1000400100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400100 ", + "MSRValue": "0x0800400100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_FAR_TILE_E_F", @@ -830,29 +830,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080100 ", + "MSRValue": "0x1000080100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080100 ", + "MSRValue": "0x0800080100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010100 ", + "MSRValue": "0x0000010100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.ANY_RESPONSE", @@ -863,29 +863,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000080 ", + "MSRValue": "0x4000000080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400080 ", + "MSRValue": "0x1000400080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400080 ", + "MSRValue": "0x0800400080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_FAR_TILE_E_F", @@ -896,29 +896,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080080 ", + "MSRValue": "0x1000080080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080080 ", + "MSRValue": "0x0800080080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010080 ", + "MSRValue": "0x0000010080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.ANY_RESPONSE", @@ -929,29 +929,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000040 ", + "MSRValue": "0x4000000040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts L2 code HW prefetches that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400040 ", + "MSRValue": "0x1000400040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400040 ", + "MSRValue": "0x0800400040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_FAR_TILE_E_F", @@ -962,29 +962,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080040 ", + "MSRValue": "0x1000080040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080040 ", + "MSRValue": "0x0800080040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts L2 code HW prefetches that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010040 ", + "MSRValue": "0x0000010040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.ANY_RESPONSE", @@ -995,18 +995,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000400020 ", + "MSRValue": "0x1000400020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400020 ", + "MSRValue": "0x0800400020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_FAR_TILE_E_F", @@ -1017,29 +1017,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080020 ", + "MSRValue": "0x1000080020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080020 ", + "MSRValue": "0x0800080020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000020020 ", + "MSRValue": "0x0000020020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE", @@ -1050,7 +1050,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0000010020 ", + "MSRValue": "0x0000010020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE", @@ -1061,29 +1061,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000004 ", + "MSRValue": "0x4000000004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts demand code reads and prefetch code reads that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400004 ", + "MSRValue": "0x1000400004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400004 ", + "MSRValue": "0x0800400004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_FAR_TILE_E_F", @@ -1094,29 +1094,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080004 ", + "MSRValue": "0x1000080004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080004 ", + "MSRValue": "0x0800080004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010004 ", + "MSRValue": "0x0000010004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", @@ -1127,29 +1127,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000002 ", + "MSRValue": "0x4000000002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts Demand cacheable data writes that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400002 ", + "MSRValue": "0x1000400002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400002 ", + "MSRValue": "0x0800400002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_FAR_TILE_E_F", @@ -1160,29 +1160,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080002 ", + "MSRValue": "0x1000080002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080002 ", + "MSRValue": "0x0800080002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010002 ", + "MSRValue": "0x0000010002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", @@ -1193,29 +1193,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x4000000001 ", + "MSRValue": "0x4000000001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that are outstanding, per weighted cycle, from the time of the request to when any response is received. The outstanding response should be programmed only on PMC0. ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that are outstanding, per weighted cycle, from the time of the request to when any response is received. The oustanding response should be programmed only on PMC0.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1000400001 ", + "MSRValue": "0x1000400001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_FAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state. ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses from a snoop request hit with data forwarded from its Far(not in the same quadrant as the request)-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800400001 ", + "MSRValue": "0x0800400001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_FAR_TILE_E_F", @@ -1226,29 +1226,29 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1000080001 ", + "MSRValue": "0x1000080001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_NEAR_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state. ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in M state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0800080001 ", + "MSRValue": "0x0800080001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_NEAR_TILE_E_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state. ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses from a snoop request hit with data forwarded from its Near-other tile's L2 in E/F state.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0000010001 ", + "MSRValue": "0x0000010001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", @@ -1259,722 +1259,722 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0002000001 ", + "MSRValue": "0x0002000001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000002 ", + "MSRValue": "0x0002000002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000004 ", + "MSRValue": "0x0002000004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000020 ", + "MSRValue": "0x0002000020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000080 ", + "MSRValue": "0x0002000080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000100 ", + "MSRValue": "0x0002000100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000200 ", + "MSRValue": "0x0002000200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000400 ", + "MSRValue": "0x0002000400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002001000 ", + "MSRValue": "0x0002001000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002002000 ", + "MSRValue": "0x0002002000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002008000 ", + "MSRValue": "0x0002008000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002003091 ", + "MSRValue": "0x0002003091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000022 ", + "MSRValue": "0x0002000022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000044 ", + "MSRValue": "0x0002000044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x00020032f7 ", + "MSRValue": "0x00020032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0002000070 ", + "MSRValue": "0x0002000070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_THIS_TILE_M", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for responses which hit its own tile's L2 with data in M state ", + "BriefDescription": "Counts any Prefetch requests that accounts for responses which hit its own tile's L2 with data in M state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000001 ", + "MSRValue": "0x0004000001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000002 ", + "MSRValue": "0x0004000002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000004 ", + "MSRValue": "0x0004000004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000020 ", + "MSRValue": "0x0004000020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000040 ", + "MSRValue": "0x0004000040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts L2 code HW prefetches that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000080 ", + "MSRValue": "0x0004000080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000100 ", + "MSRValue": "0x0004000100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000200 ", + "MSRValue": "0x0004000200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000400 ", + "MSRValue": "0x0004000400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004001000 ", + "MSRValue": "0x0004001000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004002000 ", + "MSRValue": "0x0004002000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004008000 ", + "MSRValue": "0x0004008000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004003091 ", + "MSRValue": "0x0004003091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000022 ", + "MSRValue": "0x0004000022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000044 ", + "MSRValue": "0x0004000044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x00040032f7 ", + "MSRValue": "0x00040032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0004000070 ", + "MSRValue": "0x0004000070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_THIS_TILE_E", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for responses which hit its own tile's L2 with data in E state ", + "BriefDescription": "Counts any Prefetch requests that accounts for responses which hit its own tile's L2 with data in E state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000001 ", + "MSRValue": "0x0008000001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000002 ", + "MSRValue": "0x0008000002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000004 ", + "MSRValue": "0x0008000004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000020 ", + "MSRValue": "0x0008000020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000080 ", + "MSRValue": "0x0008000080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000100 ", + "MSRValue": "0x0008000100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000200 ", + "MSRValue": "0x0008000200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000400 ", + "MSRValue": "0x0008000400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008001000 ", + "MSRValue": "0x0008001000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008002000 ", + "MSRValue": "0x0008002000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008008000 ", + "MSRValue": "0x0008008000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008003091 ", + "MSRValue": "0x0008003091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000022 ", + "MSRValue": "0x0008000022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0008000044 ", + "MSRValue": "0x0008000044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x00080032f7 ", + "MSRValue": "0x00080032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_THIS_TILE_S", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in S state ", + "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in S state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000001 ", + "MSRValue": "0x0010000001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000002 ", + "MSRValue": "0x0010000002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000004 ", + "MSRValue": "0x0010000004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000020 ", + "MSRValue": "0x0010000020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000040 ", + "MSRValue": "0x0010000040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts L2 code HW prefetches that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000080 ", + "MSRValue": "0x0010000080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000100 ", + "MSRValue": "0x0010000100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000200 ", + "MSRValue": "0x0010000200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000400 ", + "MSRValue": "0x0010000400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010001000 ", + "MSRValue": "0x0010001000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Software Prefetches that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010002000 ", + "MSRValue": "0x0010002000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010008000 ", + "MSRValue": "0x0010008000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts any request that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010003091 ", + "MSRValue": "0x0010003091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000022 ", + "MSRValue": "0x0010000022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000044 ", + "MSRValue": "0x0010000044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x00100032f7 ", + "MSRValue": "0x00100032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts any Read request that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0010000070 ", + "MSRValue": "0x0010000070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_THIS_TILE_F", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for responses which hit its own tile's L2 with data in F state ", + "BriefDescription": "Counts any Prefetch requests that accounts for responses which hit its own tile's L2 with data in F state", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x1800180002 ", + "MSRValue": "0x1800180002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_NEAR_TILE", @@ -1985,7 +1985,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180004 ", + "MSRValue": "0x1800180004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_NEAR_TILE", @@ -1996,7 +1996,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180020 ", + "MSRValue": "0x1800180020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT_NEAR_TILE", @@ -2007,7 +2007,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180040 ", + "MSRValue": "0x1800180040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_NEAR_TILE", @@ -2018,7 +2018,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180080 ", + "MSRValue": "0x1800180080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_NEAR_TILE", @@ -2029,7 +2029,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180100 ", + "MSRValue": "0x1800180100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_NEAR_TILE", @@ -2040,7 +2040,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180200 ", + "MSRValue": "0x1800180200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.L2_HIT_NEAR_TILE", @@ -2051,7 +2051,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180400 ", + "MSRValue": "0x1800180400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_NEAR_TILE", @@ -2062,7 +2062,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800181000 ", + "MSRValue": "0x1800181000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_NEAR_TILE", @@ -2073,7 +2073,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800182000 ", + "MSRValue": "0x1800182000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_NEAR_TILE", @@ -2084,7 +2084,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800188000 ", + "MSRValue": "0x1800188000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_NEAR_TILE", @@ -2095,7 +2095,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800183091 ", + "MSRValue": "0x1800183091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_NEAR_TILE", @@ -2106,7 +2106,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180022 ", + "MSRValue": "0x1800180022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_NEAR_TILE", @@ -2117,7 +2117,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180044 ", + "MSRValue": "0x1800180044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_NEAR_TILE", @@ -2128,7 +2128,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x18001832f7 ", + "MSRValue": "0x18001832f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_NEAR_TILE", @@ -2139,7 +2139,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800180070 ", + "MSRValue": "0x1800180070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_NEAR_TILE", @@ -2150,7 +2150,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400002 ", + "MSRValue": "0x1800400002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT_FAR_TILE", @@ -2161,7 +2161,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400004 ", + "MSRValue": "0x1800400004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT_FAR_TILE", @@ -2172,7 +2172,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400040 ", + "MSRValue": "0x1800400040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_HIT_FAR_TILE", @@ -2183,7 +2183,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400080 ", + "MSRValue": "0x1800400080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_HIT_FAR_TILE", @@ -2194,7 +2194,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400100 ", + "MSRValue": "0x1800400100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_HIT_FAR_TILE", @@ -2205,7 +2205,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400400 ", + "MSRValue": "0x1800400400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT_FAR_TILE", @@ -2216,7 +2216,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800401000 ", + "MSRValue": "0x1800401000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.L2_HIT_FAR_TILE", @@ -2227,7 +2227,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800402000 ", + "MSRValue": "0x1800402000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT_FAR_TILE", @@ -2238,7 +2238,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800408000 ", + "MSRValue": "0x1800408000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT_FAR_TILE", @@ -2249,7 +2249,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800403091 ", + "MSRValue": "0x1800403091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT_FAR_TILE", @@ -2260,7 +2260,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400022 ", + "MSRValue": "0x1800400022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT_FAR_TILE", @@ -2271,7 +2271,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400044 ", + "MSRValue": "0x1800400044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_HIT_FAR_TILE", @@ -2282,7 +2282,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x18004032f7 ", + "MSRValue": "0x18004032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT_FAR_TILE", @@ -2293,7 +2293,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x1800400070 ", + "MSRValue": "0x1800400070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.L2_HIT_FAR_TILE", diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/memory.json b/tools/perf/pmu-events/arch/x86/knightslanding/memory.json index 700652566200..c6bb16ba0f86 100644 --- a/tools/perf/pmu-events/arch/x86/knightslanding/memory.json +++ b/tools/perf/pmu-events/arch/x86/knightslanding/memory.json @@ -9,18 +9,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400070 ", + "MSRValue": "0x0100400070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts any Prefetch requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200070 ", + "MSRValue": "0x0080200070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.MCDRAM_NEAR", @@ -31,18 +31,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000070 ", + "MSRValue": "0x0101000070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Prefetch requests that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts any Prefetch requests that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800070 ", + "MSRValue": "0x0080800070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.DDR_NEAR", @@ -53,18 +53,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x01004032f7 ", + "MSRValue": "0x01004032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts any Read request that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x00802032f7 ", + "MSRValue": "0x00802032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.MCDRAM_NEAR", @@ -75,18 +75,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x01010032f7 ", + "MSRValue": "0x01010032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any Read request that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts any Read request that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x00808032f7 ", + "MSRValue": "0x00808032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.DDR_NEAR", @@ -97,18 +97,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400044 ", + "MSRValue": "0x0100400044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200044 ", + "MSRValue": "0x0080200044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.MCDRAM_NEAR", @@ -119,18 +119,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000044 ", + "MSRValue": "0x0101000044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Demand code reads and prefetch code read requests that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800044 ", + "MSRValue": "0x0080800044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.DDR_NEAR", @@ -141,18 +141,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400022 ", + "MSRValue": "0x0100400022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200022 ", + "MSRValue": "0x0080200022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.MCDRAM_NEAR", @@ -163,18 +163,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000022 ", + "MSRValue": "0x0101000022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data write requests that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Demand cacheable data write requests that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800022 ", + "MSRValue": "0x0080800022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.DDR_NEAR", @@ -185,18 +185,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100403091 ", + "MSRValue": "0x0100403091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080203091 ", + "MSRValue": "0x0080203091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.MCDRAM_NEAR", @@ -207,18 +207,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101003091 ", + "MSRValue": "0x0101003091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Demand cacheable data and L1 prefetch data read requests that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080803091 ", + "MSRValue": "0x0080803091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.DDR_NEAR", @@ -229,18 +229,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100408000 ", + "MSRValue": "0x0100408000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts any request that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080208000 ", + "MSRValue": "0x0080208000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.MCDRAM_NEAR", @@ -251,18 +251,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101008000 ", + "MSRValue": "0x0101008000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts any request that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts any request that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080808000 ", + "MSRValue": "0x0080808000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.DDR_NEAR", @@ -273,18 +273,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100402000 ", + "MSRValue": "0x0100402000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080202000 ", + "MSRValue": "0x0080202000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.MCDRAM_NEAR", @@ -295,18 +295,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101002000 ", + "MSRValue": "0x0101002000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L1 data HW prefetches that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts L1 data HW prefetches that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080802000 ", + "MSRValue": "0x0080802000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.DDR_NEAR", @@ -317,18 +317,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100401000 ", + "MSRValue": "0x0100401000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Software Prefetches that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080201000 ", + "MSRValue": "0x0080201000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.MCDRAM_NEAR", @@ -339,18 +339,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101001000 ", + "MSRValue": "0x0101001000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Software Prefetches that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Software Prefetches that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080801000 ", + "MSRValue": "0x0080801000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.DDR_NEAR", @@ -361,18 +361,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400400 ", + "MSRValue": "0x0100400400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200400 ", + "MSRValue": "0x0080200400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.MCDRAM_NEAR", @@ -383,18 +383,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000400 ", + "MSRValue": "0x0101000400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Bus locks and split lock requests that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Bus locks and split lock requests that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800400 ", + "MSRValue": "0x0080800400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.DDR_NEAR", @@ -405,18 +405,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400200 ", + "MSRValue": "0x0100400200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200200 ", + "MSRValue": "0x0080200200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.MCDRAM_NEAR", @@ -427,18 +427,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000200 ", + "MSRValue": "0x0101000200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts UC code reads (valid only for Outstanding response type) that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800200 ", + "MSRValue": "0x0080800200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.DDR_NEAR", @@ -449,18 +449,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400100 ", + "MSRValue": "0x0100400100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.MCDRAM_FAR", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200100 ", + "MSRValue": "0x0080200100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.MCDRAM_NEAR", @@ -471,18 +471,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000100 ", + "MSRValue": "0x0101000100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.DDR_FAR", "MSRIndex": "0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Partial writes (UC or WT or WP and should be programmed on PMC1) that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800100 ", + "MSRValue": "0x0080800100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.DDR_NEAR", @@ -493,7 +493,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x2000020080 ", + "MSRValue": "0x2000020080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.NON_DRAM", @@ -504,18 +504,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400080 ", + "MSRValue": "0x0100400080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200080 ", + "MSRValue": "0x0080200080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.MCDRAM_NEAR", @@ -526,18 +526,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000080 ", + "MSRValue": "0x0101000080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Partial reads (UC or WC and is valid only for Outstanding response type). that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800080 ", + "MSRValue": "0x0080800080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.DDR_NEAR", @@ -548,18 +548,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400040 ", + "MSRValue": "0x0100400040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts L2 code HW prefetches that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200040 ", + "MSRValue": "0x0080200040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.MCDRAM_NEAR", @@ -570,18 +570,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000040 ", + "MSRValue": "0x0101000040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 code HW prefetches that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts L2 code HW prefetches that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800040 ", + "MSRValue": "0x0080800040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.DDR_NEAR", @@ -592,7 +592,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x2000020020 ", + "MSRValue": "0x2000020020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.NON_DRAM", @@ -603,18 +603,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400020 ", + "MSRValue": "0x0100400020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200020 ", + "MSRValue": "0x0080200020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.MCDRAM_NEAR", @@ -625,18 +625,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000020 ", + "MSRValue": "0x0101000020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts L2 data RFO prefetches (includes PREFETCHW instruction) that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800020 ", + "MSRValue": "0x0080800020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.DDR_NEAR", @@ -647,18 +647,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400004 ", + "MSRValue": "0x0100400004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200004 ", + "MSRValue": "0x0080200004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.MCDRAM_NEAR", @@ -669,18 +669,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000004 ", + "MSRValue": "0x0101000004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts demand code reads and prefetch code reads that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800004 ", + "MSRValue": "0x0080800004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.DDR_NEAR", @@ -691,18 +691,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400002 ", + "MSRValue": "0x0100400002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200002 ", + "MSRValue": "0x0080200002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.MCDRAM_NEAR", @@ -713,18 +713,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000002 ", + "MSRValue": "0x0101000002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts Demand cacheable data writes that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts Demand cacheable data writes that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800002 ", + "MSRValue": "0x0080800002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.DDR_NEAR", @@ -735,18 +735,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0100400001 ", + "MSRValue": "0x0100400001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.MCDRAM_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for data responses from MCDRAM Far or Other tile L2 hit far. ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for data responses from MCDRAM Far or Other tile L2 hit far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080200001 ", + "MSRValue": "0x0080200001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.MCDRAM_NEAR", @@ -757,18 +757,18 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0101000001 ", + "MSRValue": "0x0101000001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.DDR_FAR", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100007", - "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for data responses from DRAM Far. ", + "BriefDescription": "Counts demand cacheable data and L1 prefetch data reads that accounts for data responses from DRAM Far.", "Offcore": "1" }, { "EventCode": "0xB7", - "MSRValue": "0x0080800001 ", + "MSRValue": "0x0080800001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.DDR_NEAR", @@ -779,7 +779,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600001 ", + "MSRValue": "0x0180600001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.MCDRAM", @@ -790,7 +790,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600002 ", + "MSRValue": "0x0180600002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.MCDRAM", @@ -801,7 +801,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600004 ", + "MSRValue": "0x0180600004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.MCDRAM", @@ -812,7 +812,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600020 ", + "MSRValue": "0x0180600020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.MCDRAM", @@ -823,7 +823,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600080 ", + "MSRValue": "0x0180600080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.MCDRAM", @@ -834,7 +834,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600100 ", + "MSRValue": "0x0180600100", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.MCDRAM", @@ -845,7 +845,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600200 ", + "MSRValue": "0x0180600200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.MCDRAM", @@ -856,7 +856,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600400 ", + "MSRValue": "0x0180600400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.MCDRAM", @@ -867,7 +867,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180601000 ", + "MSRValue": "0x0180601000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.MCDRAM", @@ -878,7 +878,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180608000 ", + "MSRValue": "0x0180608000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.MCDRAM", @@ -889,7 +889,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180603091 ", + "MSRValue": "0x0180603091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.MCDRAM", @@ -900,7 +900,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600022 ", + "MSRValue": "0x0180600022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.MCDRAM", @@ -911,7 +911,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600044 ", + "MSRValue": "0x0180600044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.MCDRAM", @@ -922,7 +922,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x01806032f7 ", + "MSRValue": "0x01806032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.MCDRAM", @@ -933,7 +933,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0180600070 ", + "MSRValue": "0x0180600070", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_PF_L2.MCDRAM", @@ -944,7 +944,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800001 ", + "MSRValue": "0x0181800001", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.DDR", @@ -955,7 +955,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800002 ", + "MSRValue": "0x0181800002", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.DDR", @@ -966,7 +966,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800004 ", + "MSRValue": "0x0181800004", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.DDR", @@ -977,7 +977,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800020 ", + "MSRValue": "0x0181800020", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.DDR", @@ -988,7 +988,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800040 ", + "MSRValue": "0x0181800040", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.DDR", @@ -999,7 +999,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800080 ", + "MSRValue": "0x0181800080", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.DDR", @@ -1010,7 +1010,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800200 ", + "MSRValue": "0x0181800200", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.UC_CODE_READS.DDR", @@ -1021,7 +1021,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800400 ", + "MSRValue": "0x0181800400", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.DDR", @@ -1032,7 +1032,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181801000 ", + "MSRValue": "0x0181801000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_SOFTWARE.DDR", @@ -1043,7 +1043,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181802000 ", + "MSRValue": "0x0181802000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.DDR", @@ -1054,7 +1054,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181808000 ", + "MSRValue": "0x0181808000", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.DDR", @@ -1065,7 +1065,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181803091 ", + "MSRValue": "0x0181803091", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.DDR", @@ -1076,7 +1076,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800022 ", + "MSRValue": "0x0181800022", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_RFO.DDR", @@ -1087,7 +1087,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x0181800044 ", + "MSRValue": "0x0181800044", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.DDR", @@ -1098,7 +1098,7 @@ }, { "EventCode": "0xB7", - "MSRValue": "0x01818032f7 ", + "MSRValue": "0x01818032f7", "Counter": "0,1", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.ANY_READ.DDR", diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json b/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json index bb5494cfb5ae..92e4ef2e22c6 100644 --- a/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/knightslanding/pipeline.json @@ -144,7 +144,7 @@ "BriefDescription": "Counts the number of micro-ops retired that are from the complex flows issued by the micro-sequencer (MS)." }, { - "PublicDescription": "This event counts the number of micro-ops (uops) retired. The processor decodes complex macro instructions into a sequence of simpler uops. Most instructions are composed of one or two uops. Some instructions are decoded into longer sequences such as repeat instructions, floating point transcendental instructions, and assists. ", + "PublicDescription": "This event counts the number of micro-ops (uops) retired. The processor decodes complex macro instructions into a sequence of simpler uops. Most instructions are composed of one or two uops. Some instructions are decoded into longer sequences such as repeat instructions, floating point transcendental instructions, and assists.", "EventCode": "0xC2", "Counter": "0,1", "UMask": "0x10", @@ -218,7 +218,7 @@ "UMask": "0x20", "EventName": "NO_ALLOC_CYCLES.RAT_STALL", "SampleAfterValue": "200003", - "BriefDescription": "Counts the number of core cycles when no micro-ops are allocated and a RATstall (caused by reservation station full) is asserted. " + "BriefDescription": "Counts the number of core cycles when no micro-ops are allocated and a RATstall (caused by reservation station full) is asserted." }, { "PublicDescription": "This event counts the number of core cycles when no uops are allocated, the instruction queue is empty and the alloc pipe is stalled waiting for instructions to be fetched.", @@ -251,7 +251,7 @@ "UMask": "0x1f", "EventName": "RS_FULL_STALL.ALL", "SampleAfterValue": "200003", - "BriefDescription": "Counts the total number of core cycles the Alloc pipeline is stalled when any one of the reservation stations is full. " + "BriefDescription": "Counts the total number of core cycles the Alloc pipeline is stalled when any one of the reservation stations is full." }, { "EventCode": "0xC0", @@ -268,11 +268,10 @@ "UMask": "0x1", "EventName": "CYCLES_DIV_BUSY.ALL", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles the number of core cycles when divider is busy. Does not imply a stall waiting for the divider. " + "BriefDescription": "Cycles the number of core cycles when divider is busy. Does not imply a stall waiting for the divider." }, { "PublicDescription": "This event counts the number of instructions that retire. For instructions that consist of multiple micro-ops, this event counts exactly once, as the last micro-op of the instruction retires. The event continues counting while instructions retire, including during interrupt service routines caused by hardware interrupts, faults or traps.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -296,8 +295,7 @@ "BriefDescription": "Counts the number of unhalted reference clock cycles" }, { - "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter\r\n", - "EventCode": "0x00", + "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter", "Counter": "Fixed counter 2", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", @@ -305,7 +303,6 @@ "BriefDescription": "Fixed Counter: Counts the number of unhalted core clock cycles" }, { - "EventCode": "0x00", "Counter": "Fixed counter 3", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", @@ -343,7 +340,7 @@ "UMask": "0x1", "EventName": "RECYCLEQ.LD_BLOCK_ST_FORWARD", "SampleAfterValue": "200003", - "BriefDescription": "Counts the number of occurences a retired load gets blocked because its address partially overlaps with a store ", + "BriefDescription": "Counts the number of occurences a retired load gets blocked because its address partially overlaps with a store", "Data_LA": "1" }, { diff --git a/tools/perf/pmu-events/arch/x86/knightslanding/virtual-memory.json b/tools/perf/pmu-events/arch/x86/knightslanding/virtual-memory.json index f31594507f8c..9e493977771f 100644 --- a/tools/perf/pmu-events/arch/x86/knightslanding/virtual-memory.json +++ b/tools/perf/pmu-events/arch/x86/knightslanding/virtual-memory.json @@ -36,7 +36,7 @@ "EdgeDetect": "1" }, { - "PublicDescription": "This event counts every cycle when an I-side (walks due to an instruction fetch) page walk is in progress. ", + "PublicDescription": "This event counts every cycle when an I-side (walks due to an instruction fetch) page walk is in progress.", "EventCode": "0x05", "Counter": "0,1", "UMask": "0x2", diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/cache.json b/tools/perf/pmu-events/arch/x86/sandybridge/cache.json index 16b04a20bc12..bb79e89c2049 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/cache.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/cache.json @@ -1,207 +1,200 @@ [ { - "PEBS": "1", - "EventCode": "0xD0", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x11", - "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS", - "SampleAfterValue": "100003", - "BriefDescription": "Retired load uops that miss the STLB.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x1", + "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", + "SampleAfterValue": "200003", + "BriefDescription": "Demand Data Read requests that hit L2 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xD0", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x12", - "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES", - "SampleAfterValue": "100003", - "BriefDescription": "Retired store uops that miss the STLB.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x3", + "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", + "SampleAfterValue": "200003", + "BriefDescription": "Demand Data Read requests.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xD0", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x21", - "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", - "SampleAfterValue": "100007", - "BriefDescription": "Retired load uops with locked access.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x4", + "EventName": "L2_RQSTS.RFO_HIT", + "SampleAfterValue": "200003", + "BriefDescription": "RFO requests that hit L2 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", - "EventCode": "0xD0", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x41", - "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", - "SampleAfterValue": "100003", - "BriefDescription": "Retired load uops that split across a cacheline boundary.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x8", + "EventName": "L2_RQSTS.RFO_MISS", + "SampleAfterValue": "200003", + "BriefDescription": "RFO requests that miss L2 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).", - "EventCode": "0xD0", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x42", - "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", - "SampleAfterValue": "100003", - "BriefDescription": "Retired store uops that split across a cacheline boundary.", - "CounterHTOff": "0,1,2,3" + "UMask": "0xc", + "EventName": "L2_RQSTS.ALL_RFO", + "SampleAfterValue": "200003", + "BriefDescription": "RFO requests to L2 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts the number of load uops retired", - "EventCode": "0xD0", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x81", - "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", - "SampleAfterValue": "2000003", - "BriefDescription": "All retired load uops.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x10", + "EventName": "L2_RQSTS.CODE_RD_HIT", + "SampleAfterValue": "200003", + "BriefDescription": "L2 cache hits when fetching instructions, code reads.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts the number of store uops retired.", - "EventCode": "0xD0", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x82", - "EventName": "MEM_UOPS_RETIRED.ALL_STORES", - "SampleAfterValue": "2000003", - "BriefDescription": "All retired store uops.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x20", + "EventName": "L2_RQSTS.CODE_RD_MISS", + "SampleAfterValue": "200003", + "BriefDescription": "L2 cache misses when fetching instructions.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xD1", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", - "SampleAfterValue": "2000003", - "BriefDescription": "Retired load uops with L1 cache hits as data sources.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x30", + "EventName": "L2_RQSTS.ALL_CODE_RD", + "SampleAfterValue": "200003", + "BriefDescription": "L2 code requests.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xD1", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", - "SampleAfterValue": "100003", - "BriefDescription": "Retired load uops with L2 cache hits as data sources.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x40", + "EventName": "L2_RQSTS.PF_HIT", + "SampleAfterValue": "200003", + "BriefDescription": "Requests from the L2 hardware prefetchers that hit L2 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts retired load uops that hit in the last-level (L3) cache without snoops required.", - "EventCode": "0xD1", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "MEM_LOAD_UOPS_RETIRED.LLC_HIT", - "SampleAfterValue": "50021", - "BriefDescription": "Retired load uops which data sources were data hits in LLC without snoops required.", - "CounterHTOff": "0,1,2,3" + "UMask": "0x80", + "EventName": "L2_RQSTS.PF_MISS", + "SampleAfterValue": "200003", + "BriefDescription": "Requests from the L2 hardware prefetchers that miss L2 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xD1", + "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x40", - "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB", - "SampleAfterValue": "100003", - "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.", - "CounterHTOff": "0,1,2,3" + "UMask": "0xc0", + "EventName": "L2_RQSTS.ALL_PF", + "SampleAfterValue": "200003", + "BriefDescription": "Requests from L2 hardware prefetchers.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xD2", + "EventCode": "0x27", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS", - "SampleAfterValue": "20011", - "BriefDescription": "Retired load uops which data sources were LLC hit and cross-core snoop missed in on-pkg core cache.", - "CounterHTOff": "0,1,2,3" - }, - { - "PEBS": "1", - "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package). Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line. In this case, a snoop was required, and another L2 had the line in a non-modified state.", - "EventCode": "0xD2", - "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT", - "SampleAfterValue": "20011", - "BriefDescription": "Retired load uops which data sources were LLC and cross-core snoop hits in on-pkg core cache.", - "CounterHTOff": "0,1,2,3" + "EventName": "L2_STORE_LOCK_RQSTS.MISS", + "SampleAfterValue": "200003", + "BriefDescription": "RFOs that miss cache lines.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package). Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line. In this case, a snoop was required, and another L2 had the line in a modified state, so the line had to be invalidated in that L2 cache and transferred to the requesting L2.", - "EventCode": "0xD2", + "EventCode": "0x27", "Counter": "0,1,2,3", "UMask": "0x4", - "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM", - "SampleAfterValue": "20011", - "BriefDescription": "Retired load uops which data sources were HitM responses from shared LLC.", - "CounterHTOff": "0,1,2,3" + "EventName": "L2_STORE_LOCK_RQSTS.HIT_E", + "SampleAfterValue": "200003", + "BriefDescription": "RFOs that hit cache lines in E state.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xD2", + "EventCode": "0x27", "Counter": "0,1,2,3", "UMask": "0x8", - "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE", - "SampleAfterValue": "100003", - "BriefDescription": "Retired load uops which data sources were hits in LLC without snoops required.", - "CounterHTOff": "0,1,2,3" + "EventName": "L2_STORE_LOCK_RQSTS.HIT_M", + "SampleAfterValue": "200003", + "BriefDescription": "RFOs that hit cache lines in M state.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts retired demand loads that missed the last-level (L3) cache. This means that the load is usually satisfied from memory in a client system or possibly from the remote socket in a server. Demand loads are non speculative load uops.", - "EventCode": "0xD4", + "EventCode": "0x27", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS", - "SampleAfterValue": "100007", - "BriefDescription": "Retired load uops with unknown information as data source in cache serviced the load.", - "CounterHTOff": "0,1,2,3" + "UMask": "0xf", + "EventName": "L2_STORE_LOCK_RQSTS.ALL", + "SampleAfterValue": "200003", + "BriefDescription": "RFOs that access cache lines in any state.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts L1D data line replacements. Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier. ", - "EventCode": "0x51", + "EventCode": "0x28", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "L1D.REPLACEMENT", - "SampleAfterValue": "2000003", - "BriefDescription": "L1D data line replacements.", + "EventName": "L2_L1D_WB_RQSTS.MISS", + "SampleAfterValue": "200003", + "BriefDescription": "Count the number of modified Lines evicted from L1 and missed L2. (Non-rejected WBs from the DCU.).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x51", + "EventCode": "0x28", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "L1D.ALLOCATED_IN_M", - "SampleAfterValue": "2000003", - "BriefDescription": "Allocated L1D data cache lines in M state.", + "EventName": "L2_L1D_WB_RQSTS.HIT_S", + "SampleAfterValue": "200003", + "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in S state.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x51", + "EventCode": "0x28", "Counter": "0,1,2,3", "UMask": "0x4", - "EventName": "L1D.EVICTION", - "SampleAfterValue": "2000003", - "BriefDescription": "L1D data cache lines in M state evicted due to replacement.", + "EventName": "L2_L1D_WB_RQSTS.HIT_E", + "SampleAfterValue": "200003", + "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in E state.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x51", + "EventCode": "0x28", "Counter": "0,1,2,3", "UMask": "0x8", - "EventName": "L1D.ALL_M_REPLACEMENT", - "SampleAfterValue": "2000003", - "BriefDescription": "Cache lines in M state evicted out of L1D due to Snoop HitM or dirty line replacement.", + "EventName": "L2_L1D_WB_RQSTS.HIT_M", + "SampleAfterValue": "200003", + "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in M state.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x28", + "Counter": "0,1,2,3", + "UMask": "0xf", + "EventName": "L2_L1D_WB_RQSTS.ALL", + "SampleAfterValue": "200003", + "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in any state.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x2E", + "Counter": "0,1,2,3", + "UMask": "0x41", + "EventName": "LONGEST_LAT_CACHE.MISS", + "SampleAfterValue": "100003", + "BriefDescription": "Core-originated cacheable demand requests missed LLC.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x2E", + "Counter": "0,1,2,3", + "UMask": "0x4f", + "EventName": "LONGEST_LAT_CACHE.REFERENCE", + "SampleAfterValue": "100003", + "BriefDescription": "Core-originated cacheable demand requests that refer to LLC.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -224,12 +217,61 @@ "CounterHTOff": "2" }, { - "EventCode": "0x63", + "EventCode": "0x48", + "Counter": "2", + "UMask": "0x1", + "AnyThread": "1", + "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.", + "CounterMask": "1", + "CounterHTOff": "2" + }, + { + "EventCode": "0x48", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION", + "EventName": "L1D_PEND_MISS.FB_FULL", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when L1D is locked.", + "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.", + "CounterMask": "1", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "PublicDescription": "This event counts L1D data line replacements. Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier.", + "EventCode": "0x51", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "L1D.REPLACEMENT", + "SampleAfterValue": "2000003", + "BriefDescription": "L1D data line replacements.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x51", + "Counter": "0,1,2,3", + "UMask": "0x2", + "EventName": "L1D.ALLOCATED_IN_M", + "SampleAfterValue": "2000003", + "BriefDescription": "Allocated L1D data cache lines in M state.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x51", + "Counter": "0,1,2,3", + "UMask": "0x4", + "EventName": "L1D.EVICTION", + "SampleAfterValue": "2000003", + "BriefDescription": "L1D data cache lines in M state evicted due to replacement.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x51", + "Counter": "0,1,2,3", + "UMask": "0x8", + "EventName": "L1D.ALL_M_REPLACEMENT", + "SampleAfterValue": "2000003", + "BriefDescription": "Cache lines in M state evicted out of L1D due to Snoop HitM or dirty line replacement.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -254,6 +296,16 @@ { "EventCode": "0x60", "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_C6", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.", + "CounterMask": "6", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x60", + "Counter": "0,1,2,3", "UMask": "0x4", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO", "SampleAfterValue": "2000003", @@ -263,6 +315,16 @@ { "EventCode": "0x60", "Counter": "0,1,2,3", + "UMask": "0x4", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO", + "SampleAfterValue": "2000003", + "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle.", + "CounterMask": "1", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x60", + "Counter": "0,1,2,3", "UMask": "0x8", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", "SampleAfterValue": "2000003", @@ -280,6 +342,15 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "EventCode": "0x63", + "Counter": "0,1,2,3", + "UMask": "0x2", + "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles when L1D is locked.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "EventCode": "0xB0", "Counter": "0,1,2,3", "UMask": "0x1", @@ -325,148 +396,182 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x24", + "EventCode": "0xBF", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", - "SampleAfterValue": "200003", - "BriefDescription": "Demand Data Read requests that hit L2 cache.", + "UMask": "0x5", + "EventName": "L1D_BLOCKS.BANK_CONFLICT_CYCLES", + "SampleAfterValue": "100003", + "BriefDescription": "Cycles when dispatched loads are cancelled due to L1D bank conflicts with other load ports.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x24", + "PEBS": "1", + "EventCode": "0xD0", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "L2_RQSTS.RFO_HIT", - "SampleAfterValue": "200003", - "BriefDescription": "RFO requests that hit L2 cache.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x11", + "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS", + "SampleAfterValue": "100003", + "BriefDescription": "Retired load uops that miss the STLB. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x24", + "PEBS": "1", + "EventCode": "0xD0", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "L2_RQSTS.RFO_MISS", - "SampleAfterValue": "200003", - "BriefDescription": "RFO requests that miss L2 cache.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x12", + "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES", + "SampleAfterValue": "100003", + "BriefDescription": "Retired store uops that miss the STLB. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x24", + "PEBS": "1", + "EventCode": "0xD0", "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "L2_RQSTS.CODE_RD_HIT", - "SampleAfterValue": "200003", - "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x21", + "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", + "SampleAfterValue": "100007", + "BriefDescription": "Retired load uops with locked access. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x24", + "PEBS": "1", + "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K). (Precise Event - PEBS)", + "EventCode": "0xD0", "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "L2_RQSTS.CODE_RD_MISS", - "SampleAfterValue": "200003", - "BriefDescription": "L2 cache misses when fetching instructions.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x41", + "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", + "SampleAfterValue": "100003", + "BriefDescription": "Retired load uops that split across a cacheline boundary. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x24", + "PEBS": "1", + "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K). (Precise Event - PEBS)", + "EventCode": "0xD0", "Counter": "0,1,2,3", - "UMask": "0x40", - "EventName": "L2_RQSTS.PF_HIT", - "SampleAfterValue": "200003", - "BriefDescription": "Requests from the L2 hardware prefetchers that hit L2 cache.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x42", + "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", + "SampleAfterValue": "100003", + "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x24", + "PEBS": "1", + "PublicDescription": "This event counts the number of load uops retired (Precise Event)", + "EventCode": "0xD0", "Counter": "0,1,2,3", - "UMask": "0x80", - "EventName": "L2_RQSTS.PF_MISS", - "SampleAfterValue": "200003", - "BriefDescription": "Requests from the L2 hardware prefetchers that miss L2 cache.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x81", + "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", + "SampleAfterValue": "2000003", + "BriefDescription": "All retired load uops. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x27", + "PEBS": "1", + "PublicDescription": "This event counts the number of store uops retired. (Precise Event - PEBS)", + "EventCode": "0xD0", + "Counter": "0,1,2,3", + "UMask": "0x82", + "EventName": "MEM_UOPS_RETIRED.ALL_STORES", + "SampleAfterValue": "2000003", + "BriefDescription": "All retired store uops. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" + }, + { + "PEBS": "1", + "EventCode": "0xD1", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "L2_STORE_LOCK_RQSTS.MISS", - "SampleAfterValue": "200003", - "BriefDescription": "RFOs that miss cache lines.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", + "SampleAfterValue": "2000003", + "BriefDescription": "Retired load uops with L1 cache hits as data sources. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x27", + "PEBS": "1", + "EventCode": "0xD1", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "L2_STORE_LOCK_RQSTS.HIT_E", - "SampleAfterValue": "200003", - "BriefDescription": "RFOs that hit cache lines in E state.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x2", + "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", + "SampleAfterValue": "100003", + "BriefDescription": "Retired load uops with L2 cache hits as data sources. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x27", + "PEBS": "1", + "PublicDescription": "This event counts retired load uops that hit in the last-level (L3) cache without snoops required. (Precise Event - PEBS)", + "EventCode": "0xD1", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "L2_STORE_LOCK_RQSTS.HIT_M", - "SampleAfterValue": "200003", - "BriefDescription": "RFOs that hit cache lines in M state.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x4", + "EventName": "MEM_LOAD_UOPS_RETIRED.LLC_HIT", + "SampleAfterValue": "50021", + "BriefDescription": "Retired load uops which data sources were data hits in LLC without snoops required. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x27", + "PEBS": "1", + "EventCode": "0xD1", "Counter": "0,1,2,3", - "UMask": "0xf", - "EventName": "L2_STORE_LOCK_RQSTS.ALL", - "SampleAfterValue": "200003", - "BriefDescription": "RFOs that access cache lines in any state.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x40", + "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB", + "SampleAfterValue": "100003", + "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x28", + "PEBS": "1", + "EventCode": "0xD2", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "L2_L1D_WB_RQSTS.MISS", - "SampleAfterValue": "200003", - "BriefDescription": "Count the number of modified Lines evicted from L1 and missed L2. (Non-rejected WBs from the DCU.).", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS", + "SampleAfterValue": "20011", + "BriefDescription": "Retired load uops which data sources were LLC hit and cross-core snoop missed in on-pkg core cache. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x28", + "PEBS": "1", + "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package). Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line. In this case, a snoop was required, and another L2 had the line in a non-modified state. (Precise Event - PEBS)", + "EventCode": "0xD2", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "L2_L1D_WB_RQSTS.HIT_S", - "SampleAfterValue": "200003", - "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in S state.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT", + "SampleAfterValue": "20011", + "BriefDescription": "Retired load uops which data sources were LLC and cross-core snoop hits in on-pkg core cache. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x28", + "PEBS": "1", + "PublicDescription": "This event counts retired load uops that hit in the last-level cache (L3) and were found in a non-modified state in a neighboring core's private cache (same package). Since the last level cache is inclusive, hits to the L3 may require snooping the private L2 caches of any cores on the same socket that have the line. In this case, a snoop was required, and another L2 had the line in a modified state, so the line had to be invalidated in that L2 cache and transferred to the requesting L2. (Precise Event - PEBS)", + "EventCode": "0xD2", "Counter": "0,1,2,3", "UMask": "0x4", - "EventName": "L2_L1D_WB_RQSTS.HIT_E", - "SampleAfterValue": "200003", - "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in E state.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM", + "SampleAfterValue": "20011", + "BriefDescription": "Retired load uops which data sources were HitM responses from shared LLC. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x28", + "PEBS": "1", + "EventCode": "0xD2", "Counter": "0,1,2,3", "UMask": "0x8", - "EventName": "L2_L1D_WB_RQSTS.HIT_M", - "SampleAfterValue": "200003", - "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in M state.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE", + "SampleAfterValue": "100003", + "BriefDescription": "Retired load uops which data sources were hits in LLC without snoops required. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x28", + "PEBS": "1", + "PublicDescription": "This event counts retired demand loads that missed the last-level (L3) cache. This means that the load is usually satisfied from memory in a client system or possibly from the remote socket in a server. Demand loads are non speculative load uops. (Precise Event - PEBS)", + "EventCode": "0xD4", "Counter": "0,1,2,3", - "UMask": "0xf", - "EventName": "L2_L1D_WB_RQSTS.ALL", - "SampleAfterValue": "200003", - "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in any state.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x2", + "EventName": "MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS", + "SampleAfterValue": "100007", + "BriefDescription": "Retired load uops with unknown information as data source in cache serviced the load. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xF0", @@ -623,24 +728,6 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x2E", - "Counter": "0,1,2,3", - "UMask": "0x41", - "EventName": "LONGEST_LAT_CACHE.MISS", - "SampleAfterValue": "100003", - "BriefDescription": "Core-originated cacheable demand requests missed LLC.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x2E", - "Counter": "0,1,2,3", - "UMask": "0x4f", - "EventName": "LONGEST_LAT_CACHE.REFERENCE", - "SampleAfterValue": "100003", - "BriefDescription": "Core-originated cacheable demand requests that refer to LLC.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { "EventCode": "0xF4", "Counter": "0,1,2,3", "UMask": "0x10", @@ -650,93 +737,6 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x24", - "Counter": "0,1,2,3", - "UMask": "0x3", - "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", - "SampleAfterValue": "200003", - "BriefDescription": "Demand Data Read requests.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x24", - "Counter": "0,1,2,3", - "UMask": "0xc", - "EventName": "L2_RQSTS.ALL_RFO", - "SampleAfterValue": "200003", - "BriefDescription": "RFO requests to L2 cache.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x24", - "Counter": "0,1,2,3", - "UMask": "0x30", - "EventName": "L2_RQSTS.ALL_CODE_RD", - "SampleAfterValue": "200003", - "BriefDescription": "L2 code requests.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x24", - "Counter": "0,1,2,3", - "UMask": "0xc0", - "EventName": "L2_RQSTS.ALL_PF", - "SampleAfterValue": "200003", - "BriefDescription": "Requests from L2 hardware prefetchers.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xBF", - "Counter": "0,1,2,3", - "UMask": "0x5", - "EventName": "L1D_BLOCKS.BANK_CONFLICT_CYCLES", - "SampleAfterValue": "100003", - "BriefDescription": "Cycles when dispatched loads are cancelled due to L1D bank conflicts with other load ports.", - "CounterMask": "1", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x60", - "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO", - "SampleAfterValue": "2000003", - "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle.", - "CounterMask": "1", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x60", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_C6", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.", - "CounterMask": "6", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x48", - "Counter": "2", - "UMask": "0x1", - "AnyThread": "1", - "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.", - "CounterMask": "1", - "CounterHTOff": "2" - }, - { - "EventCode": "0x48", - "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "L1D_PEND_MISS.FB_FULL", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.", - "CounterMask": "1", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { "EventCode": "0xB7, 0xBB", "MSRValue": "0x10003c0244", "Counter": "0,1,2,3", @@ -1825,7 +1825,7 @@ "EventName": "OFFCORE_RESPONSE.DATA_IN.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = DATA_INTO_CORE and RESPONSE = ANY_RESPONSE", + "BriefDescription": "REQUEST = DATA_INTO_CORE and RESPONSE = ANY_RESPONSE", "CounterHTOff": "0,1,2,3" }, { @@ -1837,7 +1837,7 @@ "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT_M.HITM", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = DEMAND_RFO and RESPONSE = LLC_HIT_M and SNOOP = HITM", + "BriefDescription": "REQUEST = DEMAND_RFO and RESPONSE = LLC_HIT_M and SNOOP = HITM", "CounterHTOff": "0,1,2,3" }, { @@ -1849,7 +1849,7 @@ "EventName": "OFFCORE_RESPONSE.PF_IFETCH.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = PF_RFO and RESPONSE = ANY_RESPONSE", + "BriefDescription": "REQUEST = PF_RFO and RESPONSE = ANY_RESPONSE", "CounterHTOff": "0,1,2,3" }, { @@ -1861,7 +1861,7 @@ "EventName": "OFFCORE_RESPONSE.PF_L_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = PF_LLC_DATA_RD and RESPONSE = ANY_RESPONSE", + "BriefDescription": "REQUEST = PF_LLC_DATA_RD and RESPONSE = ANY_RESPONSE", "CounterHTOff": "0,1,2,3" }, { @@ -1873,7 +1873,7 @@ "EventName": "OFFCORE_RESPONSE.PF_L_IFETCH.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = PF_LLC_IFETCH and RESPONSE = ANY_RESPONSE", + "BriefDescription": "REQUEST = PF_LLC_IFETCH and RESPONSE = ANY_RESPONSE", "CounterHTOff": "0,1,2,3" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/floating-point.json b/tools/perf/pmu-events/arch/x86/sandybridge/floating-point.json index 982eda48785e..ce26537c7d47 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/floating-point.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/floating-point.json @@ -1,68 +1,5 @@ [ { - "EventCode": "0xC1", - "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "OTHER_ASSISTS.AVX_STORE", - "SampleAfterValue": "100003", - "BriefDescription": "Number of GSSE memory assist for stores. GSSE microcode assist is being invoked whenever the hardware is unable to properly handle GSSE-256b operations.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xC1", - "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "OTHER_ASSISTS.AVX_TO_SSE", - "SampleAfterValue": "100003", - "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xC1", - "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "OTHER_ASSISTS.SSE_TO_AVX", - "SampleAfterValue": "100003", - "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xCA", - "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "FP_ASSIST.X87_OUTPUT", - "SampleAfterValue": "100003", - "BriefDescription": "Number of X87 assists due to output value.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xCA", - "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "FP_ASSIST.X87_INPUT", - "SampleAfterValue": "100003", - "BriefDescription": "Number of X87 assists due to input value.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xCA", - "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "FP_ASSIST.SIMD_OUTPUT", - "SampleAfterValue": "100003", - "BriefDescription": "Number of SIMD FP assists due to Output values.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xCA", - "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "FP_ASSIST.SIMD_INPUT", - "SampleAfterValue": "100003", - "BriefDescription": "Number of SIMD FP assists due to input values.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { "EventCode": "0x10", "Counter": "0,1,2,3", "UMask": "0x1", @@ -126,6 +63,69 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "EventCode": "0xC1", + "Counter": "0,1,2,3", + "UMask": "0x8", + "EventName": "OTHER_ASSISTS.AVX_STORE", + "SampleAfterValue": "100003", + "BriefDescription": "Number of GSSE memory assist for stores. GSSE microcode assist is being invoked whenever the hardware is unable to properly handle GSSE-256b operations.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xC1", + "Counter": "0,1,2,3", + "UMask": "0x10", + "EventName": "OTHER_ASSISTS.AVX_TO_SSE", + "SampleAfterValue": "100003", + "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xC1", + "Counter": "0,1,2,3", + "UMask": "0x20", + "EventName": "OTHER_ASSISTS.SSE_TO_AVX", + "SampleAfterValue": "100003", + "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xCA", + "Counter": "0,1,2,3", + "UMask": "0x2", + "EventName": "FP_ASSIST.X87_OUTPUT", + "SampleAfterValue": "100003", + "BriefDescription": "Number of X87 assists due to output value.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xCA", + "Counter": "0,1,2,3", + "UMask": "0x4", + "EventName": "FP_ASSIST.X87_INPUT", + "SampleAfterValue": "100003", + "BriefDescription": "Number of X87 assists due to input value.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xCA", + "Counter": "0,1,2,3", + "UMask": "0x8", + "EventName": "FP_ASSIST.SIMD_OUTPUT", + "SampleAfterValue": "100003", + "BriefDescription": "Number of SIMD FP assists due to Output values.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xCA", + "Counter": "0,1,2,3", + "UMask": "0x10", + "EventName": "FP_ASSIST.SIMD_INPUT", + "SampleAfterValue": "100003", + "BriefDescription": "Number of SIMD FP assists due to input values.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "EventCode": "0xCA", "Counter": "0,1,2,3", "UMask": "0x1e", diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/frontend.json b/tools/perf/pmu-events/arch/x86/sandybridge/frontend.json index 1b7b1dd36c68..e58ed14a204c 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/frontend.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/frontend.json @@ -1,24 +1,5 @@ [ { - "EventCode": "0x80", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "ICACHE.HIT", - "SampleAfterValue": "2000003", - "BriefDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and noncacheable, including UC fetches.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "PublicDescription": "This event counts the number of instruction cache, streaming buffer and victim cache misses. Counting includes unchacheable accesses.", - "EventCode": "0x80", - "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "ICACHE.MISSES", - "SampleAfterValue": "200003", - "BriefDescription": "Instruction cache, streaming buffer and victim cache misses.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { "EventCode": "0x79", "Counter": "0,1,2,3", "UMask": "0x2", @@ -39,159 +20,201 @@ { "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "IDQ.DSB_UOPS", + "UMask": "0x4", + "EventName": "IDQ.MITE_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.", + "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "IDQ.MS_DSB_UOPS", + "UMask": "0x8", + "EventName": "IDQ.DSB_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "IDQ.MS_MITE_UOPS", + "UMask": "0x8", + "EventName": "IDQ.DSB_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", + "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x30", - "EventName": "IDQ.MS_UOPS", + "UMask": "0x10", + "EventName": "IDQ.MS_DSB_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", + "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts cycles during which the microcode sequencer assisted the front-end in delivering uops. Microcode assists are used for complex instructions or scenarios that can't be handled by the standard decoder. Using other instructions, if possible, will usually improve performance. See the Intel? 64 and IA-32 Architectures Optimization Reference Manual for more information.", "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x30", - "EventName": "IDQ.MS_CYCLES", + "UMask": "0x10", + "EventName": "IDQ.MS_DSB_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", + "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of uops not delivered to the back-end per cycle, per thread, when the back-end was not stalled. In the ideal case 4 uops can be delivered each cycle. The event counts the undelivered uops - so if 3 were delivered in one cycle, the counter would be incremented by 1 for that cycle (4 - 3). If the back-end is stalled, the count for this event is not incremented even when uops were not delivered, because the back-end would not have been able to accept them. This event is used in determining the front-end bound category of the top-down pipeline slots characterization.", - "EventCode": "0x9C", + "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", + "UMask": "0x10", + "EdgeDetect": "1", + "EventName": "IDQ.MS_DSB_OCCUR", "SampleAfterValue": "2000003", - "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled .", - "CounterHTOff": "0,1,2,3" + "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequenser (MS) is busy.", + "CounterMask": "1", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x9C", + "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", + "UMask": "0x18", + "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", + "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops.", "CounterMask": "4", - "CounterHTOff": "0,1,2,3" + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x9C", + "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE", + "UMask": "0x18", + "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", - "CounterMask": "3", - "CounterHTOff": "0,1,2,3" + "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop.", + "CounterMask": "1", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xAB", + "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "DSB2MITE_SWITCHES.COUNT", + "UMask": "0x20", + "EventName": "IDQ.MS_MITE_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches.", + "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the cycles attributed to a switch from the Decoded Stream Buffer (DSB), which holds decoded instructions, to the legacy decode pipeline. It excludes cycles when the back-end cannot accept new micro-ops. The penalty for these switches is potentially several cycles of instruction starvation, where no micro-ops are delivered to the back-end.", - "EventCode": "0xAB", + "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES", + "UMask": "0x24", + "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.", + "BriefDescription": "Cycles MITE is delivering 4 Uops.", + "CounterMask": "4", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xAC", + "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "DSB_FILL.OTHER_CANCEL", + "UMask": "0x24", + "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Cases of cancelling valid DSB fill not because of exceeding way limit.", + "BriefDescription": "Cycles MITE is delivering any Uop.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xAC", + "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "DSB_FILL.EXCEED_DSB_LINES", + "UMask": "0x30", + "EventName": "IDQ.MS_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB) lines.", + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PublicDescription": "This event counts cycles during which the microcode sequencer assisted the front-end in delivering uops. Microcode assists are used for complex instructions or scenarios that can't be handled by the standard decoder. Using other instructions, if possible, will usually improve performance. See the Intel\u00ae 64 and IA-32 Architectures Optimization Reference Manual for more information.", "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "IDQ.MITE_CYCLES", + "UMask": "0x30", + "EventName": "IDQ.MS_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path.", + "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "IDQ.DSB_CYCLES", + "UMask": "0x30", + "EdgeDetect": "1", + "EventName": "IDQ.MS_SWITCHES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path.", + "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.", "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x79", "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "IDQ.MS_DSB_CYCLES", + "UMask": "0x3c", + "EventName": "IDQ.MITE_ALL_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.", - "CounterMask": "1", + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x79", + "EventCode": "0x80", "Counter": "0,1,2,3", - "UMask": "0x10", - "EdgeDetect": "1", - "EventName": "IDQ.MS_DSB_OCCUR", + "UMask": "0x1", + "EventName": "ICACHE.HIT", "SampleAfterValue": "2000003", - "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequenser (MS) is busy.", - "CounterMask": "1", + "BriefDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and noncacheable, including UC fetches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PublicDescription": "This event counts the number of instruction cache, streaming buffer and victim cache misses. Counting includes unchacheable accesses.", + "EventCode": "0x80", + "Counter": "0,1,2,3", + "UMask": "0x2", + "EventName": "ICACHE.MISSES", + "SampleAfterValue": "200003", + "BriefDescription": "Instruction cache, streaming buffer and victim cache misses.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "PublicDescription": "This event counts the number of uops not delivered to the back-end per cycle, per thread, when the back-end was not stalled. In the ideal case 4 uops can be delivered each cycle. The event counts the undelivered uops - so if 3 were delivered in one cycle, the counter would be incremented by 1 for that cycle (4 - 3). If the back-end is stalled, the count for this event is not incremented even when uops were not delivered, because the back-end would not have been able to accept them. This event is used in determining the front-end bound category of the top-down pipeline slots characterization.", + "EventCode": "0x9C", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", + "SampleAfterValue": "2000003", + "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled .", + "CounterHTOff": "0,1,2,3" + }, + { + "EventCode": "0x9C", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", + "CounterMask": "4", + "CounterHTOff": "0,1,2,3" + }, + { + "EventCode": "0x9C", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", + "CounterMask": "3", + "CounterHTOff": "0,1,2,3" + }, + { "EventCode": "0x9C", "Counter": "0,1,2,3", "UMask": "0x1", @@ -223,83 +246,60 @@ "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x79", - "Counter": "0,1,2,3", - "UMask": "0x18", - "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops.", - "CounterMask": "4", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x79", + "EventCode": "0x9C", + "Invert": "1", "Counter": "0,1,2,3", - "UMask": "0x18", - "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS", + "UMask": "0x1", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop.", + "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.", "CounterMask": "1", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x79", + "EventCode": "0xAB", "Counter": "0,1,2,3", - "UMask": "0x24", - "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS", + "UMask": "0x1", + "EventName": "DSB2MITE_SWITCHES.COUNT", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles MITE is delivering 4 Uops.", - "CounterMask": "4", + "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x79", + "PublicDescription": "This event counts the cycles attributed to a switch from the Decoded Stream Buffer (DSB), which holds decoded instructions, to the legacy decode pipeline. It excludes cycles when the back-end cannot accept new micro-ops. The penalty for these switches is potentially several cycles of instruction starvation, where no micro-ops are delivered to the back-end.", + "EventCode": "0xAB", "Counter": "0,1,2,3", - "UMask": "0x24", - "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS", + "UMask": "0x2", + "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles MITE is delivering any Uop.", - "CounterMask": "1", + "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xAC", "Counter": "0,1,2,3", - "UMask": "0xa", - "EventName": "DSB_FILL.ALL_CANCEL", + "UMask": "0x2", + "EventName": "DSB_FILL.OTHER_CANCEL", "SampleAfterValue": "2000003", - "BriefDescription": "Cases of cancelling valid Decode Stream Buffer (DSB) fill not because of exceeding way limit.", + "BriefDescription": "Cases of cancelling valid DSB fill not because of exceeding way limit.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x9C", - "Invert": "1", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", - "SampleAfterValue": "2000003", - "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.", - "CounterMask": "1", - "CounterHTOff": "0,1,2,3" - }, - { - "EventCode": "0x79", + "EventCode": "0xAC", "Counter": "0,1,2,3", - "UMask": "0x3c", - "EventName": "IDQ.MITE_ALL_UOPS", + "UMask": "0x8", + "EventName": "DSB_FILL.EXCEED_DSB_LINES", "SampleAfterValue": "2000003", - "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path.", + "BriefDescription": "Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB) lines.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x79", + "EventCode": "0xAC", "Counter": "0,1,2,3", - "UMask": "0x30", - "EdgeDetect": "1", - "EventName": "IDQ.MS_SWITCHES", + "UMask": "0xa", + "EventName": "DSB_FILL.ALL_CANCEL", "SampleAfterValue": "2000003", - "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.", - "CounterMask": "1", + "BriefDescription": "Cases of cancelling valid Decode Stream Buffer (DSB) fill not because of exceeding way limit.", "CounterHTOff": "0,1,2,3,4,5,6,7" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/memory.json b/tools/perf/pmu-events/arch/x86/sandybridge/memory.json index e6dfa89d00f3..78c1a987f9a2 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/memory.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/memory.json @@ -1,5 +1,32 @@ [ { + "EventCode": "0x05", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "MISALIGN_MEM_REF.LOADS", + "SampleAfterValue": "2000003", + "BriefDescription": "Speculative cache line split load uops dispatched to L1 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x05", + "Counter": "0,1,2,3", + "UMask": "0x2", + "EventName": "MISALIGN_MEM_REF.STORES", + "SampleAfterValue": "2000003", + "BriefDescription": "Speculative cache line split STA uops dispatched to L1 cache.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xBE", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "PAGE_WALKS.LLC_MISS", + "SampleAfterValue": "100003", + "BriefDescription": "Number of any page walk that had a miss in LLC. Does not necessary cause a SUSPEND.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "PublicDescription": "This event counts the number of memory ordering Machine Clears detected. Memory Ordering Machine Clears can result from memory disambiguation, external snoops, or cross SMT-HW-thread snoop (stores) hitting load buffers. Machine clears can have a significant performance impact if they are happening frequently.", "EventCode": "0xC3", "Counter": "0,1,2,3", @@ -126,33 +153,6 @@ "CounterHTOff": "3" }, { - "EventCode": "0xBE", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "PAGE_WALKS.LLC_MISS", - "SampleAfterValue": "100003", - "BriefDescription": "Number of any page walk that had a miss in LLC. Does not necessary cause a SUSPEND.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x05", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "MISALIGN_MEM_REF.LOADS", - "SampleAfterValue": "2000003", - "BriefDescription": "Speculative cache line split load uops dispatched to L1 cache.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x05", - "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "MISALIGN_MEM_REF.STORES", - "SampleAfterValue": "2000003", - "BriefDescription": "Speculative cache line split STA uops dispatched to L1 cache.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { "EventCode": "0xB7, 0xBB", "MSRValue": "0x300400244", "Counter": "0,1,2,3", @@ -367,7 +367,7 @@ "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.LLC_MISS_LOCAL.DRAM", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = ANY_REQUEST and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", + "BriefDescription": "REQUEST = ANY_REQUEST and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", "CounterHTOff": "0,1,2,3" }, { @@ -379,7 +379,7 @@ "EventName": "OFFCORE_RESPONSE.DATA_IN_SOCKET.LLC_MISS_LOCAL.ANY_LLC_HIT", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = DATA_IN_SOCKET and RESPONSE = LLC_MISS_LOCAL and SNOOP = ANY_LLC_HIT", + "BriefDescription": "REQUEST = DATA_IN_SOCKET and RESPONSE = LLC_MISS_LOCAL and SNOOP = ANY_LLC_HIT", "CounterHTOff": "0,1,2,3" }, { @@ -391,7 +391,7 @@ "EventName": "OFFCORE_RESPONSE.DEMAND_IFETCH.LLC_MISS_LOCAL.DRAM", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = DEMAND_IFETCH and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", + "BriefDescription": "REQUEST = DEMAND_IFETCH and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", "CounterHTOff": "0,1,2,3" }, { @@ -403,7 +403,7 @@ "EventName": "OFFCORE_RESPONSE.PF_DATA_RD.LLC_MISS_LOCAL.DRAM", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = PF_DATA_RD and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", + "BriefDescription": "REQUEST = PF_DATA_RD and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", "CounterHTOff": "0,1,2,3" }, { @@ -415,7 +415,7 @@ "EventName": "OFFCORE_RESPONSE.PF_IFETCH.LLC_MISS_LOCAL.DRAM", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = PF_RFO and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", + "BriefDescription": "REQUEST = PF_RFO and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", "CounterHTOff": "0,1,2,3" }, { @@ -427,7 +427,7 @@ "EventName": "OFFCORE_RESPONSE.PF_L_DATA_RD.LLC_MISS_LOCAL.DRAM", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = PF_LLC_DATA_RD and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", + "BriefDescription": "REQUEST = PF_LLC_DATA_RD and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", "CounterHTOff": "0,1,2,3" }, { @@ -439,7 +439,7 @@ "EventName": "OFFCORE_RESPONSE.PF_L_IFETCH.LLC_MISS_LOCAL.DRAM", "MSRIndex": "0x1a6,0x1a7", "SampleAfterValue": "100003", - "BriefDescription": " REQUEST = PF_LLC_IFETCH and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", + "BriefDescription": "REQUEST = PF_LLC_IFETCH and RESPONSE = LLC_MISS_LOCAL and SNOOP = DRAM", "CounterHTOff": "0,1,2,3" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/other.json b/tools/perf/pmu-events/arch/x86/sandybridge/other.json index 64b195b82c50..874eb40a2e0f 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/other.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/other.json @@ -9,6 +9,15 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "EventCode": "0x4E", + "Counter": "0,1,2,3", + "UMask": "0x2", + "EventName": "HW_PRE_REQ.DL1_MISS", + "SampleAfterValue": "2000003", + "BriefDescription": "Hardware Prefetch requests that miss the L1D cache. This accounts for both L1 streamer and IP-based (IPP) HW prefetchers. A request is being counted each time it access the cache & miss it, including if a block is applicable or if hit the Fill Buffer for .", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "EventCode": "0x5C", "Counter": "0,1,2,3", "UMask": "0x1", @@ -38,15 +47,6 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x4E", - "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "HW_PRE_REQ.DL1_MISS", - "SampleAfterValue": "2000003", - "BriefDescription": "Hardware Prefetch requests that miss the L1D cache. This accounts for both L1 streamer and IP-based (IPP) HW prefetchers. A request is being counted each time it access the cache & miss it, including if a block is applicable or if hit the Fill Buffer for .", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { "EventCode": "0x63", "Counter": "0,1,2,3", "UMask": "0x1", diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json b/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json index 34a519d9bfa0..b7150f65f16d 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json @@ -1,289 +1,307 @@ [ { - "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. ", - "EventCode": "0x00", - "Counter": "Fixed counter 1", + "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.", + "Counter": "Fixed counter 2", + "UMask": "0x3", + "EventName": "CPU_CLK_UNHALTED.REF_TSC", + "SampleAfterValue": "2000003", + "BriefDescription": "Reference cycles when the core is not in halt state.", + "CounterHTOff": "Fixed counter 2" + }, + { + "PublicDescription": "This event counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers.", + "Counter": "Fixed counter 0", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", "SampleAfterValue": "2000003", "BriefDescription": "Instructions retired from execution.", - "CounterHTOff": "Fixed counter 1" + "CounterHTOff": "Fixed counter 0" }, { - "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. ", - "EventCode": "0x00", - "Counter": "Fixed counter 2", + "PublicDescription": "This event counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.", + "Counter": "Fixed counter 1", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", "SampleAfterValue": "2000003", "BriefDescription": "Core cycles when the thread is not in halt state.", - "CounterHTOff": "Fixed counter 2" + "CounterHTOff": "Fixed counter 1" }, { - "PublicDescription": "This event counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. ", - "EventCode": "0x00", - "Counter": "Fixed counter 3", - "UMask": "0x3", - "EventName": "CPU_CLK_UNHALTED.REF_TSC", + "Counter": "Fixed counter 1", + "UMask": "0x2", + "AnyThread": "1", + "EventName": "CPU_CLK_UNHALTED.THREAD_ANY", "SampleAfterValue": "2000003", - "BriefDescription": "Reference cycles when the core is not in halt state.", - "CounterHTOff": "Fixed counter 3" - }, - { - "EventCode": "0x88", - "Counter": "0,1,2,3", - "UMask": "0x41", - "EventName": "BR_INST_EXEC.NONTAKEN_CONDITIONAL", - "SampleAfterValue": "200003", - "BriefDescription": "Not taken macro-conditional branches.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", + "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x88", + "EventCode": "0x03", "Counter": "0,1,2,3", - "UMask": "0x81", - "EventName": "BR_INST_EXEC.TAKEN_CONDITIONAL", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired macro-conditional branches.", + "UMask": "0x1", + "EventName": "LD_BLOCKS.DATA_UNKNOWN", + "SampleAfterValue": "100003", + "BriefDescription": "Loads delayed due to SB blocks, preceding store operations with known addresses but unknown data.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceeding smaller uncompleted store. See the table of not supported store forwards in the Intel\u00ae 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.", + "EventCode": "0x03", "Counter": "0,1,2,3", - "UMask": "0x82", - "EventName": "BR_INST_EXEC.TAKEN_DIRECT_JUMP", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired macro-conditional branch instructions excluding calls and indirects.", + "UMask": "0x2", + "EventName": "LD_BLOCKS.STORE_FORWARD", + "SampleAfterValue": "100003", + "BriefDescription": "Cases when loads get true Block-on-Store blocking code preventing store forwarding.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0x03", "Counter": "0,1,2,3", - "UMask": "0x84", - "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired indirect branches excluding calls and returns.", + "UMask": "0x8", + "EventName": "LD_BLOCKS.NO_SR", + "SampleAfterValue": "100003", + "BriefDescription": "This event counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0x03", "Counter": "0,1,2,3", - "UMask": "0x88", - "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_RETURN", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired indirect branches with return mnemonic.", + "UMask": "0x10", + "EventName": "LD_BLOCKS.ALL_BLOCK", + "SampleAfterValue": "100003", + "BriefDescription": "Number of cases where any load ends up with a valid block-code written to the load buffer (including blocks due to Memory Order Buffer (MOB), Data Cache Unit (DCU), TLB, but load has no DCU miss).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "PublicDescription": "Aliasing occurs when a load is issued after a store and their memory addresses are offset by 4K. This event counts the number of loads that aliased with a preceding store, resulting in an extended address check in the pipeline. The enhanced address check typically has a performance penalty of 5 cycles.", + "EventCode": "0x07", "Counter": "0,1,2,3", - "UMask": "0x90", - "EventName": "BR_INST_EXEC.TAKEN_DIRECT_NEAR_CALL", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired direct near calls.", + "UMask": "0x1", + "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS", + "SampleAfterValue": "100003", + "BriefDescription": "False dependencies in MOB due to partial compare.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0x07", "Counter": "0,1,2,3", - "UMask": "0xa0", - "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired indirect calls.", + "UMask": "0x8", + "EventName": "LD_BLOCKS_PARTIAL.ALL_STA_BLOCK", + "SampleAfterValue": "100003", + "BriefDescription": "This event counts the number of times that load operations are temporarily blocked because of older stores, with addresses that are not yet known. A load operation may incur more than one block of this type.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0x0D", "Counter": "0,1,2,3", - "UMask": "0xc1", - "EventName": "BR_INST_EXEC.ALL_CONDITIONAL", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired macro-conditional branches.", + "UMask": "0x3", + "EventName": "INT_MISC.RECOVERY_CYCLES", + "SampleAfterValue": "2000003", + "BriefDescription": "Number of cycles waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0x0D", "Counter": "0,1,2,3", - "UMask": "0xc2", - "EventName": "BR_INST_EXEC.ALL_DIRECT_JMP", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired macro-unconditional branches excluding calls and indirects.", + "UMask": "0x3", + "EdgeDetect": "1", + "EventName": "INT_MISC.RECOVERY_STALLS_COUNT", + "SampleAfterValue": "2000003", + "BriefDescription": "Number of occurences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0x0D", "Counter": "0,1,2,3", - "UMask": "0xc4", - "EventName": "BR_INST_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired indirect branches excluding calls and returns.", + "UMask": "0x3", + "AnyThread": "1", + "EventName": "INT_MISC.RECOVERY_CYCLES_ANY", + "SampleAfterValue": "2000003", + "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0x0D", "Counter": "0,1,2,3", - "UMask": "0xc8", - "EventName": "BR_INST_EXEC.ALL_INDIRECT_NEAR_RETURN", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired indirect return branches.", + "UMask": "0x40", + "EventName": "INT_MISC.RAT_STALL_CYCLES", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles when Resource Allocation Table (RAT) external stall is sent to Instruction Decode Queue (IDQ) for the thread.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "PublicDescription": "This event counts the number of Uops issued by the front-end of the pipeilne to the back-end.", + "EventCode": "0x0E", "Counter": "0,1,2,3", - "UMask": "0xd0", - "EventName": "BR_INST_EXEC.ALL_DIRECT_NEAR_CALL", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired direct near calls.", + "UMask": "0x1", + "EventName": "UOPS_ISSUED.ANY", + "SampleAfterValue": "2000003", + "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x89", + "EventCode": "0x0E", + "Invert": "1", "Counter": "0,1,2,3", - "UMask": "0x41", - "EventName": "BR_MISP_EXEC.NONTAKEN_CONDITIONAL", - "SampleAfterValue": "200003", - "BriefDescription": "Not taken speculative and retired mispredicted macro conditional branches.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x1", + "EventName": "UOPS_ISSUED.STALL_CYCLES", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread.", + "CounterMask": "1", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x89", + "EventCode": "0x0E", + "Invert": "1", "Counter": "0,1,2,3", - "UMask": "0x81", - "EventName": "BR_MISP_EXEC.TAKEN_CONDITIONAL", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired mispredicted macro conditional branches.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x1", + "AnyThread": "1", + "EventName": "UOPS_ISSUED.CORE_STALL_CYCLES", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for all threads.", + "CounterMask": "1", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x89", + "EventCode": "0x14", "Counter": "0,1,2,3", - "UMask": "0x84", - "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired mispredicted indirect branches excluding calls and returns.", + "UMask": "0x1", + "EventName": "ARITH.FPU_DIV_ACTIVE", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles when divider is busy executing divide operations.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x89", + "PublicDescription": "This event counts the number of the divide operations executed.", + "EventCode": "0x14", "Counter": "0,1,2,3", - "UMask": "0x88", - "EventName": "BR_MISP_EXEC.TAKEN_RETURN_NEAR", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired mispredicted indirect branches with return mnemonic.", + "UMask": "0x1", + "EdgeDetect": "1", + "EventName": "ARITH.FPU_DIV", + "SampleAfterValue": "100003", + "BriefDescription": "Divide operations executed.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x89", + "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0x90", - "EventName": "BR_MISP_EXEC.TAKEN_DIRECT_NEAR_CALL", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired mispredicted direct near calls.", + "UMask": "0x0", + "EventName": "CPU_CLK_UNHALTED.THREAD_P", + "SampleAfterValue": "2000003", + "BriefDescription": "Thread cycles when thread is not in halt state.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x89", + "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0xa0", - "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_NEAR_CALL", - "SampleAfterValue": "200003", - "BriefDescription": "Taken speculative and retired mispredicted indirect calls.", + "UMask": "0x0", + "AnyThread": "1", + "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY", + "SampleAfterValue": "2000003", + "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x89", + "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0xc1", - "EventName": "BR_MISP_EXEC.ALL_CONDITIONAL", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired mispredicted macro conditional branches.", + "UMask": "0x1", + "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK", + "SampleAfterValue": "2000003", + "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x89", + "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0xc4", - "EventName": "BR_MISP_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET", - "SampleAfterValue": "200003", - "BriefDescription": "Mispredicted indirect branches excluding calls and returns.", + "UMask": "0x1", + "AnyThread": "1", + "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY", + "SampleAfterValue": "2000003", + "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x89", + "PublicDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate)", + "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0xd0", - "EventName": "BR_MISP_EXEC.ALL_DIRECT_NEAR_CALL", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired mispredicted direct near calls.", + "UMask": "0x1", + "EventName": "CPU_CLK_UNHALTED.REF_XCLK", + "SampleAfterValue": "2000003", + "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0x0", - "EventName": "CPU_CLK_UNHALTED.THREAD_P", + "UMask": "0x1", + "AnyThread": "1", + "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY", "SampleAfterValue": "2000003", - "BriefDescription": "Thread cycles when thread is not in halt state.", + "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA8", + "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "LSD.UOPS", + "UMask": "0x2", + "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE", "SampleAfterValue": "2000003", - "BriefDescription": "Number of Uops delivered by the LSD.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "BriefDescription": "Count XClk pulses when this thread is unhalted and the other is halted.", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0xA8", + "EventCode": "0x3C", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "LSD.CYCLES_ACTIVE", + "UMask": "0x2", + "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.", - "CounterMask": "1", + "BriefDescription": "Count XClk pulses when this thread is unhalted and the other thread is halted.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x87", + "EventCode": "0x4C", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "ILD_STALL.LCP", - "SampleAfterValue": "2000003", - "BriefDescription": "Stalls caused by changing prefix length of the instruction.", + "EventName": "LOAD_HIT_PRE.SW_PF", + "SampleAfterValue": "100003", + "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for software prefetch.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x87", + "EventCode": "0x4C", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "ILD_STALL.IQ_FULL", - "SampleAfterValue": "2000003", - "BriefDescription": "Stall cycles because IQ is full.", + "UMask": "0x2", + "EventName": "LOAD_HIT_PRE.HW_PF", + "SampleAfterValue": "100003", + "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for hardware prefetch.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x0D", + "EventCode": "0x59", "Counter": "0,1,2,3", - "UMask": "0x40", - "EventName": "INT_MISC.RAT_STALL_CYCLES", + "UMask": "0x20", + "EventName": "PARTIAL_RAT_STALLS.FLAGS_MERGE_UOP", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when Resource Allocation Table (RAT) external stall is sent to Instruction Decode Queue (IDQ) for the thread.", + "BriefDescription": "Increments the number of flags-merge uops in flight each cycle.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PublicDescription": "This event counts the number of cycles spent executing performance-sensitive flags-merging uops. For example, shift CL (merge_arith_flags). For more details, See the Intel\u00ae 64 and IA-32 Architectures Optimization Reference Manual.", "EventCode": "0x59", "Counter": "0,1,2,3", "UMask": "0x20", - "EventName": "PARTIAL_RAT_STALLS.FLAGS_MERGE_UOP", + "EventName": "PARTIAL_RAT_STALLS.FLAGS_MERGE_UOP_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Increments the number of flags-merge uops in flight each cycle.", + "BriefDescription": "Performance sensitive flags-merging uops added by Sandy Bridge u-arch.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of cycles with at least one slow LEA uop being allocated. A uop is generally considered as slow LEA if it has three sources (for example, two sources and immediate) regardless of whether it is a result of LEA instruction or not. Examples of the slow LEA uop are or uops with base, index, and offset source operands using base and index reqisters, where base is EBR/RBP/R13, using RIP relative or 16-bit addressing modes. See the Intel? 64 and IA-32 Architectures Optimization Reference Manual for more details about slow LEA instructions.", + "PublicDescription": "This event counts the number of cycles with at least one slow LEA uop being allocated. A uop is generally considered as slow LEA if it has three sources (for example, two sources and immediate) regardless of whether it is a result of LEA instruction or not. Examples of the slow LEA uop are or uops with base, index, and offset source operands using base and index reqisters, where base is EBR/RBP/R13, using RIP relative or 16-bit addressing modes. See the Intel\u00ae 64 and IA-32 Architectures Optimization Reference Manual for more details about slow LEA instructions.", "EventCode": "0x59", "Counter": "0,1,2,3", "UMask": "0x40", @@ -302,48 +320,21 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA2", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "RESOURCE_STALLS.ANY", - "SampleAfterValue": "2000003", - "BriefDescription": "Resource-related stall cycles.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xA2", - "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "RESOURCE_STALLS.LB", - "SampleAfterValue": "2000003", - "BriefDescription": "Counts the cycles of stall due to lack of load buffers.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xA2", - "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "RESOURCE_STALLS.RS", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles stalled due to no eligible RS entry available.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xA2", + "EventCode": "0x5B", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "RESOURCE_STALLS.SB", + "UMask": "0xc", + "EventName": "RESOURCE_STALLS2.ALL_FL_EMPTY", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).", + "BriefDescription": "Cycles with either free list is empty.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA2", + "EventCode": "0x5B", "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "RESOURCE_STALLS.ROB", + "UMask": "0xf", + "EventName": "RESOURCE_STALLS2.ALL_PRF_CONTROL", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles stalled due to re-order buffer full.", + "BriefDescription": "Resource stalls2 control structures full for physical registers.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -356,702 +347,663 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of Uops issued by the front-end of the pipeilne to the back-end.", - "EventCode": "0x0E", + "EventCode": "0x5B", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "UOPS_ISSUED.ANY", + "UMask": "0x4f", + "EventName": "RESOURCE_STALLS2.OOO_RSRC", "SampleAfterValue": "2000003", - "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS).", + "BriefDescription": "Resource stalls out of order resources full.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x0E", - "Invert": "1", + "EventCode": "0x5E", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "UOPS_ISSUED.STALL_CYCLES", + "EventName": "RS_EVENTS.EMPTY_CYCLES", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread.", - "CounterMask": "1", - "CounterHTOff": "0,1,2,3" + "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x0E", + "EventCode": "0x5E", "Invert": "1", "Counter": "0,1,2,3", "UMask": "0x1", - "AnyThread": "1", - "EventName": "UOPS_ISSUED.CORE_STALL_CYCLES", + "EdgeDetect": "1", + "EventName": "RS_EVENTS.EMPTY_END", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for all threads.", + "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.", "CounterMask": "1", - "CounterHTOff": "0,1,2,3" + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x5E", + "EventCode": "0x87", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "RS_EVENTS.EMPTY_CYCLES", + "EventName": "ILD_STALL.LCP", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread.", + "BriefDescription": "Stalls caused by changing prefix length of the instruction.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xCC", + "EventCode": "0x87", "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "ROB_MISC_EVENTS.LBR_INSERTS", + "UMask": "0x4", + "EventName": "ILD_STALL.IQ_FULL", "SampleAfterValue": "2000003", - "BriefDescription": "Count cases of saving new LBR.", + "BriefDescription": "Stall cycles because IQ is full.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event is incremented when self-modifying code (SMC) is detected, which causes a machine clear. Machine clears can have a significant performance impact if they are happening frequently.", - "EventCode": "0xC3", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "MACHINE_CLEARS.SMC", - "SampleAfterValue": "100003", - "BriefDescription": "Self-modifying code (SMC) detected.", + "UMask": "0x41", + "EventName": "BR_INST_EXEC.NONTAKEN_CONDITIONAL", + "SampleAfterValue": "200003", + "BriefDescription": "Not taken macro-conditional branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Maskmov false fault - counts number of time ucode passes through Maskmov flow due to instruction's mask being 0 while the flow was completed without raising a fault.", - "EventCode": "0xC3", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "MACHINE_CLEARS.MASKMOV", - "SampleAfterValue": "100003", - "BriefDescription": "This event counts the number of executed Intel AVX masked load operations that refer to an illegal address range with the mask bits set to 0.", + "UMask": "0x81", + "EventName": "BR_INST_EXEC.TAKEN_CONDITIONAL", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired macro-conditional branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC0", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x0", - "EventName": "INST_RETIRED.ANY_P", - "SampleAfterValue": "2000003", - "BriefDescription": "Number of instructions retired. General Counter - architectural event.", + "UMask": "0x82", + "EventName": "BR_INST_EXEC.TAKEN_DIRECT_JUMP", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired macro-conditional branch instructions excluding calls and indirects.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts the number of micro-ops retired.", - "EventCode": "0xC2", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "UOPS_RETIRED.ALL", - "SampleAfterValue": "2000003", - "BriefDescription": "Actually retired uops.", + "UMask": "0x84", + "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired indirect branches excluding calls and returns.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "PublicDescription": "This event counts the number of retirement slots used each cycle. There are potentially 4 slots that can be used each cycle - meaning, 4 micro-ops or 4 instructions could retire each cycle. This event is used in determining the 'Retiring' category of the Top-Down pipeline slots characterization.", - "EventCode": "0xC2", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "UOPS_RETIRED.RETIRE_SLOTS", - "SampleAfterValue": "2000003", - "BriefDescription": "Retirement slots used.", + "UMask": "0x88", + "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_RETURN", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired indirect branches with return mnemonic.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC2", - "Invert": "1", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "UOPS_RETIRED.STALL_CYCLES", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles without actually retired uops.", - "CounterMask": "1", - "CounterHTOff": "0,1,2,3" + "UMask": "0x90", + "EventName": "BR_INST_EXEC.TAKEN_DIRECT_NEAR_CALL", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired direct near calls.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC2", - "Invert": "1", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "UOPS_RETIRED.TOTAL_CYCLES", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles with less than 10 actually retired uops.", - "CounterMask": "10", - "CounterHTOff": "0,1,2,3" + "UMask": "0xa0", + "EventName": "BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired indirect calls.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC4", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "BR_INST_RETIRED.CONDITIONAL", - "SampleAfterValue": "400009", - "BriefDescription": "Conditional branch instructions retired.", + "UMask": "0xc1", + "EventName": "BR_INST_EXEC.ALL_CONDITIONAL", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired macro-conditional branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC4", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "BR_INST_RETIRED.NEAR_CALL", - "SampleAfterValue": "100007", - "BriefDescription": "Direct and indirect near call instructions retired.", + "UMask": "0xc2", + "EventName": "BR_INST_EXEC.ALL_DIRECT_JMP", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired macro-unconditional branches excluding calls and indirects.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC4", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x0", - "EventName": "BR_INST_RETIRED.ALL_BRANCHES", - "SampleAfterValue": "400009", - "BriefDescription": "All (macro) branch instructions retired.", + "UMask": "0xc4", + "EventName": "BR_INST_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired indirect branches excluding calls and returns.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC4", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "BR_INST_RETIRED.NEAR_RETURN", - "SampleAfterValue": "100007", - "BriefDescription": "Return instructions retired.", + "UMask": "0xc8", + "EventName": "BR_INST_EXEC.ALL_INDIRECT_NEAR_RETURN", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired indirect return branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC4", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "BR_INST_RETIRED.NOT_TAKEN", - "SampleAfterValue": "400009", - "BriefDescription": "Not taken branch instructions retired.", + "UMask": "0xd0", + "EventName": "BR_INST_EXEC.ALL_DIRECT_NEAR_CALL", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired direct near calls.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC4", + "EventCode": "0x88", "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "BR_INST_RETIRED.NEAR_TAKEN", - "SampleAfterValue": "400009", - "BriefDescription": "Taken branch instructions retired.", + "UMask": "0xff", + "EventName": "BR_INST_EXEC.ALL_BRANCHES", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC4", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x40", - "EventName": "BR_INST_RETIRED.FAR_BRANCH", - "SampleAfterValue": "100007", - "BriefDescription": "Far branch instructions retired.", + "UMask": "0x41", + "EventName": "BR_MISP_EXEC.NONTAKEN_CONDITIONAL", + "SampleAfterValue": "200003", + "BriefDescription": "Not taken speculative and retired mispredicted macro conditional branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "2", - "EventCode": "0xC4", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS", - "SampleAfterValue": "400009", - "BriefDescription": "All (macro) branch instructions retired. (Precise Event - PEBS).", - "CounterHTOff": "0,1,2,3" + "UMask": "0x81", + "EventName": "BR_MISP_EXEC.TAKEN_CONDITIONAL", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired mispredicted macro conditional branches.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC5", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "BR_MISP_RETIRED.CONDITIONAL", - "SampleAfterValue": "400009", - "BriefDescription": "Mispredicted conditional branch instructions retired.", + "UMask": "0x84", + "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_JUMP_NON_CALL_RET", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired mispredicted indirect branches excluding calls and returns.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC5", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "BR_MISP_RETIRED.NEAR_CALL", - "SampleAfterValue": "100007", - "BriefDescription": "Direct and indirect mispredicted near call instructions retired.", + "UMask": "0x88", + "EventName": "BR_MISP_EXEC.TAKEN_RETURN_NEAR", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired mispredicted indirect branches with return mnemonic.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC5", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x0", - "EventName": "BR_MISP_RETIRED.ALL_BRANCHES", - "SampleAfterValue": "400009", - "BriefDescription": "All mispredicted macro branch instructions retired.", + "UMask": "0x90", + "EventName": "BR_MISP_EXEC.TAKEN_DIRECT_NEAR_CALL", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired mispredicted direct near calls.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC5", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "BR_MISP_RETIRED.NOT_TAKEN", - "SampleAfterValue": "400009", - "BriefDescription": "Mispredicted not taken branch instructions retired.", + "UMask": "0xa0", + "EventName": "BR_MISP_EXEC.TAKEN_INDIRECT_NEAR_CALL", + "SampleAfterValue": "200003", + "BriefDescription": "Taken speculative and retired mispredicted indirect calls.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "1", - "EventCode": "0xC5", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "BR_MISP_RETIRED.TAKEN", - "SampleAfterValue": "400009", - "BriefDescription": "Mispredicted taken branch instructions retired.", + "UMask": "0xc1", + "EventName": "BR_MISP_EXEC.ALL_CONDITIONAL", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired mispredicted macro conditional branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "2", - "PublicDescription": "Mispredicted macro branch instructions retired. (Precise Event - PEBS)", - "EventCode": "0xC5", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS", - "SampleAfterValue": "400009", - "BriefDescription": "Mispredicted macro branch instructions retired. (Precise Event - PEBS).", - "CounterHTOff": "0,1,2,3" + "UMask": "0xc4", + "EventName": "BR_MISP_EXEC.ALL_INDIRECT_JUMP_NON_CALL_RET", + "SampleAfterValue": "200003", + "BriefDescription": "Mispredicted indirect branches excluding calls and returns.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xC1", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "OTHER_ASSISTS.ITLB_MISS_RETIRED", - "SampleAfterValue": "100003", - "BriefDescription": "Retired instructions experiencing ITLB misses.", + "UMask": "0xd0", + "EventName": "BR_MISP_EXEC.ALL_DIRECT_NEAR_CALL", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired mispredicted direct near calls.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x14", + "EventCode": "0x89", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "ARITH.FPU_DIV_ACTIVE", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles when divider is busy executing divide operations.", + "UMask": "0xff", + "EventName": "BR_MISP_EXEC.ALL_BRANCHES", + "SampleAfterValue": "200003", + "BriefDescription": "Speculative and retired mispredicted macro conditional branches.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of the divide operations executed.", - "EventCode": "0x14", + "EventCode": "0xA1", "Counter": "0,1,2,3", "UMask": "0x1", - "EdgeDetect": "1", - "EventName": "ARITH.FPU_DIV", - "SampleAfterValue": "100003", - "BriefDescription": "Divide operations executed.", - "CounterMask": "1", + "EventName": "UOPS_DISPATCHED_PORT.PORT_0", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles per thread when uops are dispatched to port 0.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB1", + "EventCode": "0xA1", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "UOPS_DISPATCHED.THREAD", + "AnyThread": "1", + "EventName": "UOPS_DISPATCHED_PORT.PORT_0_CORE", "SampleAfterValue": "2000003", - "BriefDescription": "Uops dispatched per thread.", + "BriefDescription": "Cycles per core when uops are dispatched to port 0.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB1", + "EventCode": "0xA1", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "UOPS_DISPATCHED.CORE", + "EventName": "UOPS_DISPATCHED_PORT.PORT_1", "SampleAfterValue": "2000003", - "BriefDescription": "Uops dispatched from any thread.", + "BriefDescription": "Cycles per thread when uops are dispatched to port 1.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xA1", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "UOPS_DISPATCHED_PORT.PORT_0", + "UMask": "0x2", + "AnyThread": "1", + "EventName": "UOPS_DISPATCHED_PORT.PORT_1_CORE", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when uops are dispatched to port 0.", + "BriefDescription": "Cycles per core when uops are dispatched to port 1.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xA1", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "UOPS_DISPATCHED_PORT.PORT_1", + "UMask": "0xc", + "EventName": "UOPS_DISPATCHED_PORT.PORT_2", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when uops are dispatched to port 1.", + "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 2.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xA1", "Counter": "0,1,2,3", - "UMask": "0x40", - "EventName": "UOPS_DISPATCHED_PORT.PORT_4", + "UMask": "0xc", + "AnyThread": "1", + "EventName": "UOPS_DISPATCHED_PORT.PORT_2_CORE", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when uops are dispatched to port 4.", + "BriefDescription": "Cycles per core when load or STA uops are dispatched to port 2.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xA1", "Counter": "0,1,2,3", - "UMask": "0x80", - "EventName": "UOPS_DISPATCHED_PORT.PORT_5", + "UMask": "0x30", + "EventName": "UOPS_DISPATCHED_PORT.PORT_3", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when uops are dispatched to port 5.", + "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 3.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA3", + "EventCode": "0xA1", "Counter": "0,1,2,3", - "UMask": "0x4", - "EventName": "CYCLE_ACTIVITY.CYCLES_NO_DISPATCH", + "UMask": "0x30", + "AnyThread": "1", + "EventName": "UOPS_DISPATCHED_PORT.PORT_3_CORE", "SampleAfterValue": "2000003", - "BriefDescription": "Each cycle there was no dispatch for this thread, increment by 1. Note this is connect to Umask 2. No dispatch can be deduced from the UOPS_EXECUTED event.", - "CounterMask": "4", - "CounterHTOff": "0,1,2,3" + "BriefDescription": "Cycles per core when load or STA uops are dispatched to port 3.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA3", - "Counter": "2", - "UMask": "0x2", - "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_PENDING", + "EventCode": "0xA1", + "Counter": "0,1,2,3", + "UMask": "0x40", + "EventName": "UOPS_DISPATCHED_PORT.PORT_4", "SampleAfterValue": "2000003", - "BriefDescription": "Each cycle there was a miss-pending demand load this thread, increment by 1. Note this is in DCU and connected to Umask 1. Miss Pending demand load should be deduced by OR-ing increment bits of DCACHE_MISS_PEND.PENDING.", - "CounterMask": "2", - "CounterHTOff": "2" + "BriefDescription": "Cycles per thread when uops are dispatched to port 4.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA3", + "EventCode": "0xA1", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "CYCLE_ACTIVITY.CYCLES_L2_PENDING", + "UMask": "0x40", + "AnyThread": "1", + "EventName": "UOPS_DISPATCHED_PORT.PORT_4_CORE", "SampleAfterValue": "2000003", - "BriefDescription": "Each cycle there was a MLC-miss pending demand load this thread (i.e. Non-completed valid SQ entry allocated for demand load and waiting for Uncore), increment by 1. Note this is in MLC and connected to Umask 0.", - "CounterMask": "1", + "BriefDescription": "Cycles per core when uops are dispatched to port 4.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA3", - "Counter": "2", - "UMask": "0x6", - "EventName": "CYCLE_ACTIVITY.STALLS_L1D_PENDING", + "EventCode": "0xA1", + "Counter": "0,1,2,3", + "UMask": "0x80", + "EventName": "UOPS_DISPATCHED_PORT.PORT_5", "SampleAfterValue": "2000003", - "BriefDescription": "Each cycle there was a miss-pending demand load this thread and no uops dispatched, increment by 1. Note this is in DCU and connected to Umask 1 and 2. Miss Pending demand load should be deduced by OR-ing increment bits of DCACHE_MISS_PEND.PENDING.", - "CounterMask": "6", - "CounterHTOff": "2" + "BriefDescription": "Cycles per thread when uops are dispatched to port 5.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA3", + "EventCode": "0xA1", "Counter": "0,1,2,3", - "UMask": "0x5", - "EventName": "CYCLE_ACTIVITY.STALLS_L2_PENDING", + "UMask": "0x80", + "AnyThread": "1", + "EventName": "UOPS_DISPATCHED_PORT.PORT_5_CORE", "SampleAfterValue": "2000003", - "BriefDescription": "Each cycle there was a MLC-miss pending demand load and no uops dispatched on this thread (i.e. Non-completed valid SQ entry allocated for demand load and waiting for Uncore), increment by 1. Note this is in MLC and connected to Umask 0 and 2.", - "CounterMask": "5", - "CounterHTOff": "0,1,2,3" + "BriefDescription": "Cycles per core when uops are dispatched to port 5.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x4C", + "EventCode": "0xA2", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "LOAD_HIT_PRE.SW_PF", - "SampleAfterValue": "100003", - "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for software prefetch.", + "EventName": "RESOURCE_STALLS.ANY", + "SampleAfterValue": "2000003", + "BriefDescription": "Resource-related stall cycles.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x4C", + "EventCode": "0xA2", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "LOAD_HIT_PRE.HW_PF", - "SampleAfterValue": "100003", - "BriefDescription": "Not software-prefetch load dispatches that hit FB allocated for hardware prefetch.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x03", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "LD_BLOCKS.DATA_UNKNOWN", - "SampleAfterValue": "100003", - "BriefDescription": "Loads delayed due to SB blocks, preceding store operations with known addresses but unknown data.", + "EventName": "RESOURCE_STALLS.LB", + "SampleAfterValue": "2000003", + "BriefDescription": "Counts the cycles of stall due to lack of load buffers.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts loads that followed a store to the same address, where the data could not be forwarded inside the pipeline from the store to the load. The most common reason why store forwarding would be blocked is when a load's address range overlaps with a preceding smaller uncompleted store. See the table of not supported store forwards in the Intel? 64 and IA-32 Architectures Optimization Reference Manual. The penalty for blocked store forwarding is that the load must wait for the store to complete before it can be issued.", - "EventCode": "0x03", + "EventCode": "0xA2", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "LD_BLOCKS.STORE_FORWARD", - "SampleAfterValue": "100003", - "BriefDescription": "Cases when loads get true Block-on-Store blocking code preventing store forwarding.", + "UMask": "0x4", + "EventName": "RESOURCE_STALLS.RS", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles stalled due to no eligible RS entry available.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x03", + "EventCode": "0xA2", "Counter": "0,1,2,3", "UMask": "0x8", - "EventName": "LD_BLOCKS.NO_SR", - "SampleAfterValue": "100003", - "BriefDescription": "This event counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.", + "EventName": "RESOURCE_STALLS.SB", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x03", + "EventCode": "0xA2", "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "LD_BLOCKS.ALL_BLOCK", - "SampleAfterValue": "100003", - "BriefDescription": "Number of cases where any load ends up with a valid block-code written to the load buffer (including blocks due to Memory Order Buffer (MOB), Data Cache Unit (DCU), TLB, but load has no DCU miss).", + "UMask": "0xa", + "EventName": "RESOURCE_STALLS.LB_SB", + "SampleAfterValue": "2000003", + "BriefDescription": "Resource stalls due to load or store buffers all being in use.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Aliasing occurs when a load is issued after a store and their memory addresses are offset by 4K. This event counts the number of loads that aliased with a preceding store, resulting in an extended address check in the pipeline. The enhanced address check typically has a performance penalty of 5 cycles.", - "EventCode": "0x07", + "EventCode": "0xA2", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS", - "SampleAfterValue": "100003", - "BriefDescription": "False dependencies in MOB due to partial compare.", + "UMask": "0xe", + "EventName": "RESOURCE_STALLS.MEM_RS", + "SampleAfterValue": "2000003", + "BriefDescription": "Resource stalls due to memory buffers or Reservation Station (RS) being fully utilized.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x07", + "EventCode": "0xA2", "Counter": "0,1,2,3", - "UMask": "0x8", - "EventName": "LD_BLOCKS_PARTIAL.ALL_STA_BLOCK", - "SampleAfterValue": "100003", - "BriefDescription": "This event counts the number of times that load operations are temporarily blocked because of older stores, with addresses that are not yet known. A load operation may incur more than one block of this type.", + "UMask": "0x10", + "EventName": "RESOURCE_STALLS.ROB", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles stalled due to re-order buffer full.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB6", + "EventCode": "0xA2", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "AGU_BYPASS_CANCEL.COUNT", - "SampleAfterValue": "100003", - "BriefDescription": "This event counts executed load operations with all the following traits: 1. addressing of the format [base + offset], 2. the offset is between 1 and 2047, 3. the address specified in the base register is in one page and the address [base+offset] is in an.", + "UMask": "0xf0", + "EventName": "RESOURCE_STALLS.OOO_RSRC", + "SampleAfterValue": "2000003", + "BriefDescription": "Resource stalls due to Rob being full, FCSW, MXCSR and OTHER.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x3C", + "EventCode": "0xA3", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK", + "EventName": "CYCLE_ACTIVITY.CYCLES_L2_PENDING", "SampleAfterValue": "2000003", - "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate).", + "BriefDescription": "Each cycle there was a MLC-miss pending demand load this thread (i.e. Non-completed valid SQ entry allocated for demand load and waiting for Uncore), increment by 1. Note this is in MLC and connected to Umask 0.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x3C", - "Counter": "0,1,2,3", + "EventCode": "0xA3", + "Counter": "2", "UMask": "0x2", - "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE", + "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_PENDING", "SampleAfterValue": "2000003", - "BriefDescription": "Count XClk pulses when this thread is unhalted and the other is halted.", - "CounterHTOff": "0,1,2,3" + "BriefDescription": "Each cycle there was a miss-pending demand load this thread, increment by 1. Note this is in DCU and connected to Umask 1. Miss Pending demand load should be deduced by OR-ing increment bits of DCACHE_MISS_PEND.PENDING.", + "CounterMask": "2", + "CounterHTOff": "2" }, { - "EventCode": "0xA1", + "EventCode": "0xA3", "Counter": "0,1,2,3", - "UMask": "0x1", - "AnyThread": "1", - "EventName": "UOPS_DISPATCHED_PORT.PORT_0_CORE", + "UMask": "0x4", + "EventName": "CYCLE_ACTIVITY.CYCLES_NO_DISPATCH", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per core when uops are dispatched to port 0.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "BriefDescription": "Each cycle there was no dispatch for this thread, increment by 1. Note this is connect to Umask 2. No dispatch can be deduced from the UOPS_EXECUTED event.", + "CounterMask": "4", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0xA1", + "EventCode": "0xA3", "Counter": "0,1,2,3", - "UMask": "0x2", - "AnyThread": "1", - "EventName": "UOPS_DISPATCHED_PORT.PORT_1_CORE", + "UMask": "0x5", + "EventName": "CYCLE_ACTIVITY.STALLS_L2_PENDING", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per core when uops are dispatched to port 1.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "BriefDescription": "Each cycle there was a MLC-miss pending demand load and no uops dispatched on this thread (i.e. Non-completed valid SQ entry allocated for demand load and waiting for Uncore), increment by 1. Note this is in MLC and connected to Umask 0 and 2.", + "CounterMask": "5", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0xA1", - "Counter": "0,1,2,3", - "UMask": "0x40", - "AnyThread": "1", - "EventName": "UOPS_DISPATCHED_PORT.PORT_4_CORE", + "EventCode": "0xA3", + "Counter": "2", + "UMask": "0x6", + "EventName": "CYCLE_ACTIVITY.STALLS_L1D_PENDING", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per core when uops are dispatched to port 4.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "BriefDescription": "Each cycle there was a miss-pending demand load this thread and no uops dispatched, increment by 1. Note this is in DCU and connected to Umask 1 and 2. Miss Pending demand load should be deduced by OR-ing increment bits of DCACHE_MISS_PEND.PENDING.", + "CounterMask": "6", + "CounterHTOff": "2" }, { - "EventCode": "0xA1", + "EventCode": "0xA8", "Counter": "0,1,2,3", - "UMask": "0x80", - "AnyThread": "1", - "EventName": "UOPS_DISPATCHED_PORT.PORT_5_CORE", + "UMask": "0x1", + "EventName": "LSD.UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per core when uops are dispatched to port 5.", + "BriefDescription": "Number of Uops delivered by the LSD.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA1", + "EventCode": "0xA8", "Counter": "0,1,2,3", - "UMask": "0xc", - "EventName": "UOPS_DISPATCHED_PORT.PORT_2", + "UMask": "0x1", + "EventName": "LSD.CYCLES_ACTIVE", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 2.", + "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA1", + "EventCode": "0xA8", "Counter": "0,1,2,3", - "UMask": "0x30", - "EventName": "UOPS_DISPATCHED_PORT.PORT_3", + "UMask": "0x1", + "EventName": "LSD.CYCLES_4_UOPS", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per thread when load or STA uops are dispatched to port 3.", + "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.", + "CounterMask": "4", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA1", + "EventCode": "0xB1", "Counter": "0,1,2,3", - "UMask": "0xc", - "AnyThread": "1", - "EventName": "UOPS_DISPATCHED_PORT.PORT_2_CORE", + "UMask": "0x1", + "EventName": "UOPS_DISPATCHED.THREAD", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per core when load or STA uops are dispatched to port 2.", + "BriefDescription": "Uops dispatched per thread.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA1", + "EventCode": "0xB1", "Counter": "0,1,2,3", - "UMask": "0x30", - "AnyThread": "1", - "EventName": "UOPS_DISPATCHED_PORT.PORT_3_CORE", + "UMask": "0x2", + "EventName": "UOPS_DISPATCHED.CORE", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles per core when load or STA uops are dispatched to port 3.", + "BriefDescription": "Uops dispatched from any thread.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PEBS": "2", - "EventCode": "0xC0", - "Counter": "1", - "UMask": "0x1", - "EventName": "INST_RETIRED.PREC_DIST", - "SampleAfterValue": "2000003", - "BriefDescription": "Instructions retired. (Precise Event - PEBS).", - "TakenAlone": "1", - "CounterHTOff": "1" - }, - { - "EventCode": "0x5B", + "EventCode": "0xB1", "Counter": "0,1,2,3", - "UMask": "0xf", - "EventName": "RESOURCE_STALLS2.ALL_PRF_CONTROL", + "UMask": "0x2", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1", "SampleAfterValue": "2000003", - "BriefDescription": "Resource stalls2 control structures full for physical registers.", + "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.", + "CounterMask": "1", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x5B", + "EventCode": "0xB1", "Counter": "0,1,2,3", - "UMask": "0xc", - "EventName": "RESOURCE_STALLS2.ALL_FL_EMPTY", + "UMask": "0x2", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles with either free list is empty.", + "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.", + "CounterMask": "2", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA2", + "EventCode": "0xB1", "Counter": "0,1,2,3", - "UMask": "0xe", - "EventName": "RESOURCE_STALLS.MEM_RS", + "UMask": "0x2", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3", "SampleAfterValue": "2000003", - "BriefDescription": "Resource stalls due to memory buffers or Reservation Station (RS) being fully utilized.", + "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.", + "CounterMask": "3", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA2", + "EventCode": "0xB1", "Counter": "0,1,2,3", - "UMask": "0xf0", - "EventName": "RESOURCE_STALLS.OOO_RSRC", + "UMask": "0x2", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4", "SampleAfterValue": "2000003", - "BriefDescription": "Resource stalls due to Rob being full, FCSW, MXCSR and OTHER.", + "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.", + "CounterMask": "4", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x5B", + "EventCode": "0xB1", + "Invert": "1", "Counter": "0,1,2,3", - "UMask": "0x4f", - "EventName": "RESOURCE_STALLS2.OOO_RSRC", + "UMask": "0x2", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE", "SampleAfterValue": "2000003", - "BriefDescription": "Resource stalls out of order resources full.", + "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA2", + "EventCode": "0xB6", "Counter": "0,1,2,3", - "UMask": "0xa", - "EventName": "RESOURCE_STALLS.LB_SB", - "SampleAfterValue": "2000003", - "BriefDescription": "Resource stalls due to load or store buffers all being in use.", + "UMask": "0x1", + "EventName": "AGU_BYPASS_CANCEL.COUNT", + "SampleAfterValue": "100003", + "BriefDescription": "This event counts executed load operations with all the following traits: 1. addressing of the format [base + offset], 2. the offset is between 1 and 2047, 3. the address specified in the base register is in one page and the address [base+offset] is in an.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x0D", + "EventCode": "0xC0", "Counter": "0,1,2,3", - "UMask": "0x3", - "EventName": "INT_MISC.RECOVERY_CYCLES", + "UMask": "0x0", + "EventName": "INST_RETIRED.ANY_P", "SampleAfterValue": "2000003", - "BriefDescription": "Number of cycles waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).", - "CounterMask": "1", + "BriefDescription": "Number of instructions retired. General Counter - architectural event.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts the number of cycles spent executing performance-sensitive flags-merging uops. For example, shift CL (merge_arith_flags). For more details, See the Intel? 64 and IA-32 Architectures Optimization Reference Manual.", - "EventCode": "0x59", - "Counter": "0,1,2,3", - "UMask": "0x20", - "EventName": "PARTIAL_RAT_STALLS.FLAGS_MERGE_UOP_CYCLES", + "PEBS": "2", + "EventCode": "0xC0", + "Counter": "1", + "UMask": "0x1", + "EventName": "INST_RETIRED.PREC_DIST", "SampleAfterValue": "2000003", - "BriefDescription": "Performance sensitive flags-merging uops added by Sandy Bridge u-arch.", - "CounterMask": "1", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "BriefDescription": "Instructions retired. (Precise Event - PEBS).", + "TakenAlone": "1", + "CounterHTOff": "1" }, { - "EventCode": "0x0D", + "EventCode": "0xC1", "Counter": "0,1,2,3", - "UMask": "0x3", - "EdgeDetect": "1", - "EventName": "INT_MISC.RECOVERY_STALLS_COUNT", - "SampleAfterValue": "2000003", - "BriefDescription": "Number of occurences waiting for the checkpoints in Resource Allocation Table (RAT) to be recovered after Nuke due to all other cases except JEClear (e.g. whenever a ucode assist is needed like SSE exception, memory disambiguation, etc...).", - "CounterMask": "1", + "UMask": "0x2", + "EventName": "OTHER_ASSISTS.ITLB_MISS_RETIRED", + "SampleAfterValue": "100003", + "BriefDescription": "Retired instructions experiencing ITLB misses.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xE6", + "PEBS": "1", + "PublicDescription": "This event counts the number of micro-ops retired. (Precise Event)", + "EventCode": "0xC2", "Counter": "0,1,2,3", - "UMask": "0x1f", - "EventName": "BACLEARS.ANY", - "SampleAfterValue": "100003", - "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.", + "UMask": "0x1", + "EventName": "UOPS_RETIRED.ALL", + "SampleAfterValue": "2000003", + "BriefDescription": "Actually retired uops. (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x88", + "EventCode": "0xC2", + "Invert": "1", "Counter": "0,1,2,3", - "UMask": "0xff", - "EventName": "BR_INST_EXEC.ALL_BRANCHES", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired branches.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x1", + "EventName": "UOPS_RETIRED.STALL_CYCLES", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles without actually retired uops.", + "CounterMask": "1", + "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0x89", + "EventCode": "0xC2", + "Invert": "1", "Counter": "0,1,2,3", - "UMask": "0xff", - "EventName": "BR_MISP_EXEC.ALL_BRANCHES", - "SampleAfterValue": "200003", - "BriefDescription": "Speculative and retired mispredicted macro conditional branches.", - "CounterHTOff": "0,1,2,3,4,5,6,7" + "UMask": "0x1", + "EventName": "UOPS_RETIRED.TOTAL_CYCLES", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles with less than 10 actually retired uops.", + "CounterMask": "10", + "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xC2", @@ -1065,13 +1017,14 @@ "CounterHTOff": "0,1,2,3" }, { - "EventCode": "0xA8", + "PEBS": "1", + "PublicDescription": "This event counts the number of retirement slots used each cycle. There are potentially 4 slots that can be used each cycle - meaning, 4 micro-ops or 4 instructions could retire each cycle. This event is used in determining the 'Retiring' category of the Top-Down pipeline slots characterization. (Precise Event - PEBS)", + "EventCode": "0xC2", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "LSD.CYCLES_4_UOPS", + "UMask": "0x2", + "EventName": "UOPS_RETIRED.RETIRE_SLOTS", "SampleAfterValue": "2000003", - "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.", - "CounterMask": "4", + "BriefDescription": "Retirement slots used. (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -1086,135 +1039,188 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x5E", - "Invert": "1", + "PublicDescription": "This event is incremented when self-modifying code (SMC) is detected, which causes a machine clear. Machine clears can have a significant performance impact if they are happening frequently.", + "EventCode": "0xC3", "Counter": "0,1,2,3", - "UMask": "0x1", - "EdgeDetect": "1", - "EventName": "RS_EVENTS.EMPTY_END", - "SampleAfterValue": "2000003", - "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.", - "CounterMask": "1", + "UMask": "0x4", + "EventName": "MACHINE_CLEARS.SMC", + "SampleAfterValue": "100003", + "BriefDescription": "Self-modifying code (SMC) detected.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x00", - "Counter": "Fixed counter 2", - "UMask": "0x2", - "AnyThread": "1", - "EventName": "CPU_CLK_UNHALTED.THREAD_ANY", - "SampleAfterValue": "2000003", - "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", - "CounterHTOff": "Fixed counter 2" + "PublicDescription": "Maskmov false fault - counts number of time ucode passes through Maskmov flow due to instruction's mask being 0 while the flow was completed without raising a fault.", + "EventCode": "0xC3", + "Counter": "0,1,2,3", + "UMask": "0x20", + "EventName": "MACHINE_CLEARS.MASKMOV", + "SampleAfterValue": "100003", + "BriefDescription": "This event counts the number of executed Intel AVX masked load operations that refer to an illegal address range with the mask bits set to 0.", + "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x3C", + "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x0", - "AnyThread": "1", - "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY", - "SampleAfterValue": "2000003", - "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", + "EventName": "BR_INST_RETIRED.ALL_BRANCHES", + "SampleAfterValue": "400009", + "BriefDescription": "All (macro) branch instructions retired.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x3C", + "PEBS": "1", + "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x1", - "AnyThread": "1", - "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY", - "SampleAfterValue": "2000003", - "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).", + "EventName": "BR_INST_RETIRED.CONDITIONAL", + "SampleAfterValue": "400009", + "BriefDescription": "Conditional branch instructions retired. (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x0D", + "PEBS": "1", + "EventCode": "0xC4", "Counter": "0,1,2,3", - "UMask": "0x3", - "AnyThread": "1", - "EventName": "INT_MISC.RECOVERY_CYCLES_ANY", - "SampleAfterValue": "2000003", - "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).", - "CounterMask": "1", + "UMask": "0x2", + "EventName": "BR_INST_RETIRED.NEAR_CALL", + "SampleAfterValue": "100007", + "BriefDescription": "Direct and indirect near call instructions retired. (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB1", + "PEBS": "1", + "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.", - "CounterMask": "1", + "EventName": "BR_INST_RETIRED.NEAR_CALL_R3", + "SampleAfterValue": "100007", + "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3). (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB1", + "PEBS": "2", + "EventCode": "0xC4", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.", - "CounterMask": "2", + "UMask": "0x4", + "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS", + "SampleAfterValue": "400009", + "BriefDescription": "All (macro) branch instructions retired. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" + }, + { + "PEBS": "1", + "EventCode": "0xC4", + "Counter": "0,1,2,3", + "UMask": "0x8", + "EventName": "BR_INST_RETIRED.NEAR_RETURN", + "SampleAfterValue": "100007", + "BriefDescription": "Return instructions retired. (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB1", + "EventCode": "0xC4", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.", - "CounterMask": "3", + "UMask": "0x10", + "EventName": "BR_INST_RETIRED.NOT_TAKEN", + "SampleAfterValue": "400009", + "BriefDescription": "Not taken branch instructions retired.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB1", + "PEBS": "1", + "EventCode": "0xC4", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.", - "CounterMask": "4", + "UMask": "0x20", + "EventName": "BR_INST_RETIRED.NEAR_TAKEN", + "SampleAfterValue": "400009", + "BriefDescription": "Taken branch instructions retired. (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xB1", - "Invert": "1", + "EventCode": "0xC4", "Counter": "0,1,2,3", - "UMask": "0x2", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.", + "UMask": "0x40", + "EventName": "BR_INST_RETIRED.FAR_BRANCH", + "SampleAfterValue": "100007", + "BriefDescription": "Far branch instructions retired.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate)", - "EventCode": "0x3C", + "EventCode": "0xC5", "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "CPU_CLK_UNHALTED.REF_XCLK", - "SampleAfterValue": "2000003", - "BriefDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate).", + "UMask": "0x0", + "EventName": "BR_MISP_RETIRED.ALL_BRANCHES", + "SampleAfterValue": "400009", + "BriefDescription": "All mispredicted macro branch instructions retired.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x3C", + "PEBS": "1", + "EventCode": "0xC5", "Counter": "0,1,2,3", "UMask": "0x1", - "AnyThread": "1", - "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY", - "SampleAfterValue": "2000003", - "BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).", + "EventName": "BR_MISP_RETIRED.CONDITIONAL", + "SampleAfterValue": "400009", + "BriefDescription": "Mispredicted conditional branch instructions retired. (Precise Event - PEBS).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x3C", + "PEBS": "1", + "EventCode": "0xC5", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE", + "EventName": "BR_MISP_RETIRED.NEAR_CALL", + "SampleAfterValue": "100007", + "BriefDescription": "Direct and indirect mispredicted near call instructions retired. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "PEBS": "2", + "PublicDescription": "Mispredicted macro branch instructions retired. (Precise Event - PEBS)", + "EventCode": "0xC5", + "Counter": "0,1,2,3", + "UMask": "0x4", + "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS", + "SampleAfterValue": "400009", + "BriefDescription": "Mispredicted macro branch instructions retired. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3" + }, + { + "PEBS": "1", + "EventCode": "0xC5", + "Counter": "0,1,2,3", + "UMask": "0x10", + "EventName": "BR_MISP_RETIRED.NOT_TAKEN", + "SampleAfterValue": "400009", + "BriefDescription": "Mispredicted not taken branch instructions retired.(Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "PEBS": "1", + "EventCode": "0xC5", + "Counter": "0,1,2,3", + "UMask": "0x20", + "EventName": "BR_MISP_RETIRED.TAKEN", + "SampleAfterValue": "400009", + "BriefDescription": "Mispredicted taken branch instructions retired. (Precise Event - PEBS).", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xCC", + "Counter": "0,1,2,3", + "UMask": "0x20", + "EventName": "ROB_MISC_EVENTS.LBR_INSERTS", "SampleAfterValue": "2000003", - "BriefDescription": "Count XClk pulses when this thread is unhalted and the other thread is halted.", + "BriefDescription": "Count cases of saving new LBR.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xE6", + "Counter": "0,1,2,3", + "UMask": "0x1f", + "EventName": "BACLEARS.ANY", + "SampleAfterValue": "100003", + "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.", "CounterHTOff": "0,1,2,3,4,5,6,7" } ]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json b/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json index fd7d7c438226..cfeba5067bab 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json @@ -1,140 +1,226 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", - "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4) )", - "MetricGroup": "Frontend", + "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 32 * ( ICACHE.HIT + ICACHE.MISSES ) / 4 ) )", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ) )", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_DISPATCHED.THREAD / (( cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@ / 2 ) if #SMT_on else cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_DISPATCHED.THREAD / (( cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@ / 2) if #SMT_on else cpu@UOPS_DISPATCHED.CORE\\,cmask\\=1@)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Average CPU Utilization", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2 * FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4 * ( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8 * SIMD_FP_256.PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE + FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE ) + 2* FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE + 4*( FP_COMP_OPS_EXE.SSE_PACKED_SINGLE + SIMD_FP_256.PACKED_DOUBLE ) + 8* SIMD_FP_256.PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/sandybridge/virtual-memory.json b/tools/perf/pmu-events/arch/x86/sandybridge/virtual-memory.json index a654ab771fce..b8eccce5d75d 100644 --- a/tools/perf/pmu-events/arch/x86/sandybridge/virtual-memory.json +++ b/tools/perf/pmu-events/arch/x86/sandybridge/virtual-memory.json @@ -1,131 +1,131 @@ [ { - "EventCode": "0xAE", - "Counter": "0,1,2,3", - "UMask": "0x1", - "EventName": "ITLB.ITLB_FLUSH", - "SampleAfterValue": "100007", - "BriefDescription": "Flushing of the Instruction TLB (ITLB) pages, includes 4k/2M/4M pages.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x4F", - "Counter": "0,1,2,3", - "UMask": "0x10", - "EventName": "EPT.WALK_CYCLES", - "SampleAfterValue": "2000003", - "BriefDescription": "Cycle count for an Extended Page table walk. The Extended Page Directory cache is used by Virtual Machine operating systems while the guest operating systems use the standard TLB caches.", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x85", + "EventCode": "0x08", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "ITLB_MISSES.MISS_CAUSES_A_WALK", + "EventName": "DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK", "SampleAfterValue": "100003", - "BriefDescription": "Misses at all ITLB levels that cause page walks.", + "BriefDescription": "Load misses in all DTLB levels that cause page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x85", + "EventCode": "0x08", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "ITLB_MISSES.WALK_COMPLETED", + "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED", "SampleAfterValue": "100003", - "BriefDescription": "Misses in all ITLB levels that cause completed page walks.", + "BriefDescription": "Load misses at all DTLB levels that cause completed page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event count cycles when Page Miss Handler (PMH) is servicing page walks caused by ITLB misses.", - "EventCode": "0x85", + "PublicDescription": "This event counts cycles when the page miss handler (PMH) is servicing page walks caused by DTLB load misses.", + "EventCode": "0x08", "Counter": "0,1,2,3", "UMask": "0x4", - "EventName": "ITLB_MISSES.WALK_DURATION", + "EventName": "DTLB_LOAD_MISSES.WALK_DURATION", "SampleAfterValue": "2000003", "BriefDescription": "Cycles when PMH is busy with page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x85", + "PublicDescription": "This event counts load operations that miss the first DTLB level but hit the second and do not cause any page walks. The penalty in this case is approximately 7 cycles.", + "EventCode": "0x08", "Counter": "0,1,2,3", "UMask": "0x10", - "EventName": "ITLB_MISSES.STLB_HIT", + "EventName": "DTLB_LOAD_MISSES.STLB_HIT", "SampleAfterValue": "100003", - "BriefDescription": "Operations that miss the first ITLB level but hit the second and do not cause any page walks.", + "BriefDescription": "Load operations that miss the first DTLB level but hit the second and do not cause page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x08", + "EventCode": "0x49", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK", + "EventName": "DTLB_STORE_MISSES.MISS_CAUSES_A_WALK", "SampleAfterValue": "100003", - "BriefDescription": "Load misses in all DTLB levels that cause page walks.", + "BriefDescription": "Store misses in all DTLB levels that cause page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x08", + "EventCode": "0x49", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED", + "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED", "SampleAfterValue": "100003", - "BriefDescription": "Load misses at all DTLB levels that cause completed page walks.", + "BriefDescription": "Store misses in all DTLB levels that cause completed page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts cycles when the page miss handler (PMH) is servicing page walks caused by DTLB load misses.", - "EventCode": "0x08", + "EventCode": "0x49", "Counter": "0,1,2,3", "UMask": "0x4", - "EventName": "DTLB_LOAD_MISSES.WALK_DURATION", + "EventName": "DTLB_STORE_MISSES.WALK_DURATION", "SampleAfterValue": "2000003", "BriefDescription": "Cycles when PMH is busy with page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This event counts load operations that miss the first DTLB level but hit the second and do not cause any page walks. The penalty in this case is approximately 7 cycles.", - "EventCode": "0x08", + "EventCode": "0x49", "Counter": "0,1,2,3", "UMask": "0x10", - "EventName": "DTLB_LOAD_MISSES.STLB_HIT", + "EventName": "DTLB_STORE_MISSES.STLB_HIT", "SampleAfterValue": "100003", - "BriefDescription": "Load operations that miss the first DTLB level but hit the second and do not cause page walks.", + "BriefDescription": "Store operations that miss the first TLB level but hit the second and do not cause page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x49", + "EventCode": "0x4F", + "Counter": "0,1,2,3", + "UMask": "0x10", + "EventName": "EPT.WALK_CYCLES", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycle count for an Extended Page table walk. The Extended Page Directory cache is used by Virtual Machine operating systems while the guest operating systems use the standard TLB caches.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x85", "Counter": "0,1,2,3", "UMask": "0x1", - "EventName": "DTLB_STORE_MISSES.MISS_CAUSES_A_WALK", + "EventName": "ITLB_MISSES.MISS_CAUSES_A_WALK", "SampleAfterValue": "100003", - "BriefDescription": "Store misses in all DTLB levels that cause page walks.", + "BriefDescription": "Misses at all ITLB levels that cause page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x49", + "EventCode": "0x85", "Counter": "0,1,2,3", "UMask": "0x2", - "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED", + "EventName": "ITLB_MISSES.WALK_COMPLETED", "SampleAfterValue": "100003", - "BriefDescription": "Store misses in all DTLB levels that cause completed page walks.", + "BriefDescription": "Misses in all ITLB levels that cause completed page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x49", + "PublicDescription": "This event count cycles when Page Miss Handler (PMH) is servicing page walks caused by ITLB misses.", + "EventCode": "0x85", "Counter": "0,1,2,3", "UMask": "0x4", - "EventName": "DTLB_STORE_MISSES.WALK_DURATION", + "EventName": "ITLB_MISSES.WALK_DURATION", "SampleAfterValue": "2000003", "BriefDescription": "Cycles when PMH is busy with page walks.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x49", + "EventCode": "0x85", "Counter": "0,1,2,3", "UMask": "0x10", - "EventName": "DTLB_STORE_MISSES.STLB_HIT", + "EventName": "ITLB_MISSES.STLB_HIT", "SampleAfterValue": "100003", - "BriefDescription": "Store operations that miss the first TLB level but hit the second and do not cause page walks.", + "BriefDescription": "Operations that miss the first ITLB level but hit the second and do not cause any page walks.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xAE", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "ITLB.ITLB_FLUSH", + "SampleAfterValue": "100007", + "BriefDescription": "Flushing of the Instruction TLB (ITLB) pages, includes 4k/2M/4M pages.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { diff --git a/tools/perf/pmu-events/arch/x86/silvermont/cache.json b/tools/perf/pmu-events/arch/x86/silvermont/cache.json index 82be7d1b8b81..805ef1436539 100644 --- a/tools/perf/pmu-events/arch/x86/silvermont/cache.json +++ b/tools/perf/pmu-events/arch/x86/silvermont/cache.json @@ -36,7 +36,7 @@ "BriefDescription": "L2 cache request misses" }, { - "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ICache miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ICache miss. Note: this event is not the same as the total number of cycles spent retrieving instruction cache lines from the memory hierarchy.\r\nCounts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events. \r\n", + "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ICache miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ICache miss. Note: this event is not the same as the total number of cycles spent retrieving instruction cache lines from the memory hierarchy.\r\nCounts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events.", "EventCode": "0x86", "Counter": "0,1", "UMask": "0x4", diff --git a/tools/perf/pmu-events/arch/x86/silvermont/other.json b/tools/perf/pmu-events/arch/x86/silvermont/other.json new file mode 100644 index 000000000000..47814046fa9d --- /dev/null +++ b/tools/perf/pmu-events/arch/x86/silvermont/other.json @@ -0,0 +1,20 @@ +[ + { + "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ITLB miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ITLB miss. Note: this event is not the same as page walk cycles to retrieve an instruction translation.", + "EventCode": "0x86", + "Counter": "0,1", + "UMask": "0x2", + "EventName": "FETCH_STALL.ITLB_FILL_PENDING_CYCLES", + "SampleAfterValue": "200003", + "BriefDescription": "Cycles code-fetch stalled due to an outstanding ITLB miss." + }, + { + "PublicDescription": "Counts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events.", + "EventCode": "0x86", + "Counter": "0,1", + "UMask": "0x3f", + "EventName": "FETCH_STALL.ALL", + "SampleAfterValue": "200003", + "BriefDescription": "Cycles code-fetch stalled due to any reason." + } +]
\ No newline at end of file diff --git a/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json b/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json index 7468af99190a..1ed62ad4cf77 100644 --- a/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/silvermont/pipeline.json @@ -210,7 +210,7 @@ "UMask": "0x4", "EventName": "NO_ALLOC_CYCLES.MISPREDICTS", "SampleAfterValue": "200003", - "BriefDescription": "Counts the number of cycles when no uops are allocated and the alloc pipe is stalled waiting for a mispredicted jump to retire. After the misprediction is detected, the front end will start immediately but the allocate pipe stalls until the mispredicted " + "BriefDescription": "Counts the number of cycles when no uops are allocated and the alloc pipe is stalled waiting for a mispredicted jump to retire. After the misprediction is detected, the front end will start immediately but the allocate pipe stalls until the mispredicted" }, { "EventCode": "0xCA", @@ -275,7 +275,6 @@ }, { "PublicDescription": "This event counts the number of instructions that retire. For instructions that consist of multiple micro-ops, this event counts exactly once, as the last micro-op of the instruction retires. The event continues counting while instructions retire, including during interrupt service routines caused by hardware interrupts, faults or traps. Background: Modern microprocessors employ extensive pipelining and speculative techniques. Since sometimes an instruction is started but never completed, the notion of \"retirement\" is introduced. A retired instruction is one that commits its states. Or stated differently, an instruction might be abandoned at some point. No instruction is truly finished until it retires. This counter measures the number of completed instructions. The fixed event is INST_RETIRED.ANY and the programmable event is INST_RETIRED.ANY_P.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -284,7 +283,6 @@ }, { "PublicDescription": "Counts the number of core cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. In systems with a constant core frequency, this event can give you a measurement of the elapsed time while the core was not in halt state by dividing the event count by the core frequency. This event is architecturally defined and is a designated fixed counter. CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.CORE_P use the core frequency which may change from time to time. CPU_CLK_UNHALTE.REF_TSC and CPU_CLK_UNHALTED.REF are not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. The fixed events are CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.REF_TSC and the programmable events are CPU_CLK_UNHALTED.CORE_P and CPU_CLK_UNHALTED.REF.", - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.CORE", @@ -293,7 +291,6 @@ }, { "PublicDescription": "Counts the number of reference cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time. This event is not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. Divide this event count by core frequency to determine the elapsed time while the core was not in halt state. Divide this event count by core frequency to determine the elapsed time while the core was not in halt state. This event is architecturally defined and is a designated fixed counter. CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.CORE_P use the core frequency which may change from time to time. CPU_CLK_UNHALTE.REF_TSC and CPU_CLK_UNHALTED.REF are not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. The fixed events are CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.REF_TSC and the programmable events are CPU_CLK_UNHALTED.CORE_P and CPU_CLK_UNHALTED.REF.", - "EventCode": "0x00", "Counter": "Fixed counter 3", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", diff --git a/tools/perf/pmu-events/arch/x86/skylake/cache.json b/tools/perf/pmu-events/arch/x86/skylake/cache.json index 54bfe9e4045c..720458139049 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/cache.json +++ b/tools/perf/pmu-events/arch/x86/skylake/cache.json @@ -60,10 +60,10 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts the number of demand Data Read requests that hit L2 cache. Only non rejected loads are counted.", + "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x41", + "UMask": "0xc1", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "SampleAfterValue": "200003", "BriefDescription": "Demand Data Read requests that hit L2 cache", @@ -73,7 +73,7 @@ "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x42", + "UMask": "0xc2", "EventName": "L2_RQSTS.RFO_HIT", "SampleAfterValue": "200003", "BriefDescription": "RFO requests that hit L2 cache", @@ -83,7 +83,7 @@ "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.", "EventCode": "0x24", "Counter": "0,1,2,3", - "UMask": "0x44", + "UMask": "0xc4", "EventName": "L2_RQSTS.CODE_RD_HIT", "SampleAfterValue": "200003", "BriefDescription": "L2 cache hits when fetching instructions, code reads.", @@ -482,7 +482,7 @@ }, { "PEBS": "1", - "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.\r\n", + "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.", "EventCode": "0xD1", "Counter": "0,1,2,3", "UMask": "0x1", @@ -554,7 +554,7 @@ }, { "PEBS": "1", - "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready. \r\n", + "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.", "EventCode": "0xD1", "Counter": "0,1,2,3", "UMask": "0x40", @@ -661,13 +661,13 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache.", + "PublicDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF", "EventCode": "0xF2", "Counter": "0,1,2,3", "UMask": "0x4", "EventName": "L2_LINES_OUT.USELESS_PREF", "SampleAfterValue": "200003", - "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache", + "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -690,249 +690,2238 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC01C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x10001C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x04001C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x02001C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x01001C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00801C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00401C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fc0400001 ", + "MSRValue": "0x0200028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests have any response type.", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0000018000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests have any response type.", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC01C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x10001C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x04001C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x02001C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x01001C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00801C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00401C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0000010004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC01C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x10001C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x04001C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x02001C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x01001C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00801C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00401C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs) have any response type.", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0000010002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs) have any response type.", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & ANY_SNOOP", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000400001 ", + "MSRValue": "0x1000400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400400001 ", + "MSRValue": "0x0400400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200400001 ", + "MSRValue": "0x0200400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_MISS", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100400001 ", + "MSRValue": "0x0100400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080400001 ", + "MSRValue": "0x0080400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040400001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L4_HIT_LOCAL_L4 & SNOOP_NONE", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fc01c0001 ", + "MSRValue": "0x3FC01C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_HIT & ANY_SNOOP", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x10001c0001 ", + "MSRValue": "0x10001C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x04001c0001 ", + "MSRValue": "0x04001C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoops sent to sibling cores return clean response. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x02001c0001 ", + "MSRValue": "0x02001C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoops sent to sibling cores return clean response.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x01001c0001 ", + "MSRValue": "0x01001C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00801c0001 ", + "MSRValue": "0x00801C0001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00401C0001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_NONE", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fc0020001 ", + "MSRValue": "0x0080100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1000040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0400040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0200040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0100040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0080040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC0020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & ANY_SNOOP", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1000020001 ", + "MSRValue": "0x1000020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0400020001 ", + "MSRValue": "0x0400020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0200020001 ", + "MSRValue": "0x0200020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_MISS", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0100020001 ", + "MSRValue": "0x0100020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0080020001 ", + "MSRValue": "0x0080020001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0040020001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & SUPPLIER_NONE & SNOOP_NONE", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "Counts demand data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads have any response type.", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0000010001 ", + "MSRValue": "0x0000010001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "Counts demand data reads that have any response type.", + "BriefDescription": "Counts demand data reads have any response type.", "Offcore": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/skylake/frontend.json b/tools/perf/pmu-events/arch/x86/skylake/frontend.json index 578dff5bd823..7fa95a35e3ca 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/frontend.json +++ b/tools/perf/pmu-events/arch/x86/skylake/frontend.json @@ -177,7 +177,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4 x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions). c. Instruction Decode Queue (IDQ) delivers four uops.", + "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding \u201c4 \u2013 x\u201d when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions). c. Instruction Decode Queue (IDQ) delivers four uops.", "EventCode": "0x9C", "Counter": "0,1,2,3", "UMask": "0x1", @@ -242,7 +242,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.", + "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 0\u20132 cycles.", "EventCode": "0xAB", "Counter": "0,1,2,3", "UMask": "0x2", @@ -253,7 +253,7 @@ }, { "PEBS": "1", - "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. \r\n", + "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.", "EventCode": "0xC6", "MSRValue": "0x11", "Counter": "0,1,2,3", @@ -360,7 +360,7 @@ }, { "PEBS": "1", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops. \r\n", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.", "EventCode": "0xC6", "MSRValue": "0x400806", "Counter": "0,1,2,3", @@ -374,7 +374,7 @@ }, { "PEBS": "1", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.\r\n", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.", "EventCode": "0xC6", "MSRValue": "0x401006", "Counter": "0,1,2,3", @@ -388,7 +388,7 @@ }, { "PEBS": "1", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.\r\n", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.", "EventCode": "0xC6", "MSRValue": "0x402006", "Counter": "0,1,2,3", @@ -454,7 +454,7 @@ }, { "PEBS": "1", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.\r\n", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.", "EventCode": "0xC6", "MSRValue": "0x100206", "Counter": "0,1,2,3", diff --git a/tools/perf/pmu-events/arch/x86/skylake/memory.json b/tools/perf/pmu-events/arch/x86/skylake/memory.json index 3bd8b712c889..f197b4c7695b 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/memory.json +++ b/tools/perf/pmu-events/arch/x86/skylake/memory.json @@ -215,7 +215,7 @@ "UMask": "0x4", "EventName": "HLE_RETIRED.ABORTED", "SampleAfterValue": "2000003", - "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one). ", + "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -237,6 +237,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PublicDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).", "EventCode": "0xC8", "Counter": "0,1,2,3", "UMask": "0x20", @@ -292,7 +293,7 @@ "UMask": "0x4", "EventName": "RTM_RETIRED.ABORTED", "SampleAfterValue": "2000003", - "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one). ", + "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one).", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -346,7 +347,7 @@ }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 4 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x4", "Counter": "0,1,2,3", @@ -354,13 +355,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4", "MSRIndex": "0x3F6", "SampleAfterValue": "100003", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 4 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 8 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x8", "Counter": "0,1,2,3", @@ -368,13 +369,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8", "MSRIndex": "0x3F6", "SampleAfterValue": "50021", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 8 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 16 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x10", "Counter": "0,1,2,3", @@ -382,13 +383,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16", "MSRIndex": "0x3F6", "SampleAfterValue": "20011", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 16 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 32 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x20", "Counter": "0,1,2,3", @@ -396,13 +397,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32", "MSRIndex": "0x3F6", "SampleAfterValue": "100007", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 32 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 64 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x40", "Counter": "0,1,2,3", @@ -410,13 +411,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64", "MSRIndex": "0x3F6", "SampleAfterValue": "2003", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 64 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 128 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x80", "Counter": "0,1,2,3", @@ -424,13 +425,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128", "MSRIndex": "0x3F6", "SampleAfterValue": "1009", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 128 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 256 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x100", "Counter": "0,1,2,3", @@ -438,13 +439,13 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256", "MSRIndex": "0x3F6", "SampleAfterValue": "503", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 256 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { "PEBS": "2", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 512 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles. Reported latency may be longer than just the memory latency.", "EventCode": "0xCD", "MSRValue": "0x200", "Counter": "0,1,2,3", @@ -452,163 +453,1151 @@ "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512", "MSRIndex": "0x3F6", "SampleAfterValue": "101", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 512 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.", "TakenAlone": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts any other requests", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3ffc000001 ", + "MSRValue": "0x3FFC408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x203C408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x103C408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x043C408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x023C408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x013C408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00BC408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x007C408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC4008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2004008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1004008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0404008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0204008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0104008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0084008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0044008000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000408000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x20001C8000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000108000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000088000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000048000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts any other requests", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000028000", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts any other requests", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FFC400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x203C400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x103C400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x043C400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x023C400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x013C400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00BC400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x007C400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC4000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2004000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1004000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0404000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0204000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0104000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0084000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0044000004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000400004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x20001C0004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000100004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000080004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000040004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000020004", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FFC400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x203C400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x103C400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x043C400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x023C400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x013C400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x00BC400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x007C400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC4000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2004000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x1004000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HITM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0404000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0204000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0104000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0084000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0044000002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000400002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x20001C0002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000100002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000080002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000040002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts all demand data writes (RFOs)", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000020002", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts all demand data writes (RFOs)", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FFC400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x203C400001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & ANY_SNOOP", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x103c000001 ", + "MSRValue": "0x103C400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x043c000001 ", + "MSRValue": "0x043C400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x023c000001 ", + "MSRValue": "0x023C400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_MISS", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x013c000001 ", + "MSRValue": "0x013C400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x00bc000001 ", + "MSRValue": "0x00BC400001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_NONE", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x3fc4000001 ", + "MSRValue": "0x007C400001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x3FC4000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2004000001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x1004000001 ", + "MSRValue": "0x1004000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0404000001 ", + "MSRValue": "0x0404000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0204000001 ", + "MSRValue": "0x0204000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0104000001 ", + "MSRValue": "0x0104000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" }, { - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "PublicDescription": "Counts demand data reads", "EventCode": "0xB7, 0xBB", - "MSRValue": "0x0084000001 ", + "MSRValue": "0x0084000001", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE", - "MSRIndex": "0x1a6,0x1a7", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x0044000001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SPL_HIT", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000400001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x20001C0001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000100001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000080001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000040001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", + "SampleAfterValue": "100003", + "BriefDescription": "Counts demand data reads", + "Offcore": "1", + "CounterHTOff": "0,1,2,3" + }, + { + "PublicDescription": "Counts demand data reads", + "EventCode": "0xB7, 0xBB", + "MSRValue": "0x2000020001", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NON_DRAM", + "MSRIndex": "0x1a6, 0x1a7", "SampleAfterValue": "100003", - "BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE", + "BriefDescription": "Counts demand data reads", "Offcore": "1", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/skylake/pipeline.json b/tools/perf/pmu-events/arch/x86/skylake/pipeline.json index bc6d2afbcd8a..4a891fbbc4bb 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/skylake/pipeline.json @@ -1,7 +1,6 @@ [ { "PublicDescription": "Counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, Counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. INST_RETIRED.ANY_P is counted by a programmable counter and it is an architectural performance event. Counting: Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.", - "EventCode": "0x00", "Counter": "Fixed counter 0", "UMask": "0x1", "EventName": "INST_RETIRED.ANY", @@ -11,7 +10,6 @@ }, { "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.", - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "EventName": "CPU_CLK_UNHALTED.THREAD", @@ -20,7 +18,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "Counter": "Fixed counter 1", "UMask": "0x2", "AnyThread": "1", @@ -31,7 +28,6 @@ }, { "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'. The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'. After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.", - "EventCode": "0x00", "Counter": "Fixed counter 2", "UMask": "0x3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", @@ -121,7 +117,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.", + "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to \u201cMixing Intel AVX and Intel SSE Code\u201d section of the Optimization Guide.", "EventCode": "0x0E", "Counter": "0,1,2,3", "UMask": "0x2", @@ -248,6 +244,16 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PublicDescription": "This event counts cycles during which the microcode scoreboard stalls happen.", + "EventCode": "0x59", + "Counter": "0,1,2,3", + "UMask": "0x1", + "EventName": "PARTIAL_RAT_STALLS.SCOREBOARD", + "SampleAfterValue": "2000003", + "BriefDescription": "Cycles where the pipeline is stalled due to serializing operations.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.", "EventCode": "0x5E", "Counter": "0,1,2,3", @@ -361,8 +367,8 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "Counts resource-related stall cycles. Reasons for stalls can be as follows:a. *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots).b. *any* u-arch structure got empty (like INT/SIMD FreeLists).c. FPU control word (FPCW), MXCSR.and others. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.", - "EventCode": "0xA2", + "PublicDescription": "Counts resource-related stall cycles.", + "EventCode": "0xa2", "Counter": "0,1,2,3", "UMask": "0x1", "EventName": "RESOURCE_STALLS.ANY", @@ -735,7 +741,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts cycles without actually retired uops.", + "PublicDescription": "This event counts cycles without actually retired uops.", "EventCode": "0xC2", "Invert": "1", "Counter": "0,1,2,3", @@ -759,6 +765,7 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "PublicDescription": "Number of machine clears (nukes) of any type.", "EventCode": "0xC3", "Counter": "0,1,2,3", "UMask": "0x1", @@ -839,14 +846,15 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts not taken branch instructions retired.", + "PEBS": "1", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts not taken branch instructions retired.", "EventCode": "0xC4", "Counter": "0,1,2,3", "UMask": "0x10", "Errata": "SKL091", "EventName": "BR_INST_RETIRED.NOT_TAKEN", "SampleAfterValue": "400009", - "BriefDescription": "Not taken branch instructions retired.", + "BriefDescription": "Counts all not taken macro branch instructions retired.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -924,7 +932,7 @@ "UMask": "0x20", "EventName": "BR_MISP_RETIRED.NEAR_TAKEN", "SampleAfterValue": "400009", - "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken. ", + "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { @@ -938,6 +946,15 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "EventCode": "0xCC", + "Counter": "0,1,2,3", + "UMask": "0x40", + "EventName": "ROB_MISC_EVENTS.PAUSE_INST", + "SampleAfterValue": "2000003", + "BriefDescription": "Number of retired PAUSE instructions (that do not end up with a VMExit to the VMM; TSX aborted Instructions may be counted). This event is not supported on first SKL and KBL products.", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.", "EventCode": "0xE6", "Counter": "0,1,2,3", diff --git a/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json b/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json index 71e9737f4614..2c95417a4dae 100644 --- a/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json +++ b/tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json @@ -1,164 +1,364 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", - "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ((UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 64 * ( ICACHE_64B.IFTAG_HIT + ICACHE_64B.IFTAG_MISS ) / 4.1) )", - "MetricGroup": "Frontend", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { + "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 64 * ( ICACHE_64B.IFTAG_HIT + ICACHE_64B.IFTAG_MISS ) / 4.1 ) )", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ))", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE_16B.IFDATA_STALL - ICACHE_64B.IFTAG_STALL ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "Branch_Misprediction_Cost" }, { + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts_SMT", + "MetricName": "Branch_Misprediction_Cost_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" + }, + { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( L1D_PEND_MISS.PENDING_CYCLES_ANY / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * cycles )", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles) )", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) )", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Access_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2* FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4*( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8* FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { + "MetricExpr": "arb@event\\=0x80\\,umask\\=0x2@ / arb@event\\=0x80\\,umask\\=0x2\\,thresh\\=1@", + "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_Parallel_Reads" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/arch/x86/skylakex/cache.json b/tools/perf/pmu-events/arch/x86/skylakex/cache.json index 5c9940866acd..24df183693fa 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/cache.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/cache.json @@ -61,17 +61,17 @@ }, { "EventCode": "0x24", - "UMask": "0x41", + "UMask": "0xc1", "BriefDescription": "Demand Data Read requests that hit L2 cache", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", - "PublicDescription": "Counts the number of demand Data Read requests that hit L2 cache. Only non rejected loads are counted.", + "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache", "SampleAfterValue": "200003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x24", - "UMask": "0x42", + "UMask": "0xc2", "BriefDescription": "RFO requests that hit L2 cache", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.RFO_HIT", @@ -81,7 +81,7 @@ }, { "EventCode": "0x24", - "UMask": "0x44", + "UMask": "0xc4", "BriefDescription": "L2 cache hits when fetching instructions, code reads.", "Counter": "0,1,2,3", "EventName": "L2_RQSTS.CODE_RD_HIT", @@ -165,6 +165,7 @@ "BriefDescription": "Core-originated cacheable demand requests missed L3", "Counter": "0,1,2,3", "EventName": "LONGEST_LAT_CACHE.MISS", + "Errata": "SKL057", "PublicDescription": "Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2. It does not include all misses to the L3.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3,4,5,6,7" @@ -175,28 +176,29 @@ "BriefDescription": "Core-originated cacheable demand requests that refer to L3", "Counter": "0,1,2,3", "EventName": "LONGEST_LAT_CACHE.REFERENCE", - "PublicDescription": "Counts core-originated cacheable requests to the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2. It does not include all accesses to the L3.", + "Errata": "SKL057", + "PublicDescription": "Counts core-originated cacheable requests to the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2. It does not include all accesses to the L3.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x48", "UMask": "0x1", - "BriefDescription": "L1D miss outstandings duration in cycles", + "BriefDescription": "Cycles with L1D load Misses outstanding.", "Counter": "0,1,2,3", - "EventName": "L1D_PEND_MISS.PENDING", - "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.", + "EventName": "L1D_PEND_MISS.PENDING_CYCLES", + "CounterMask": "1", + "PublicDescription": "Counts duration of L1D miss outstanding in cycles.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x48", "UMask": "0x1", - "BriefDescription": "Cycles with L1D load Misses outstanding.", + "BriefDescription": "L1D miss outstandings duration in cycles", "Counter": "0,1,2,3", - "EventName": "L1D_PEND_MISS.PENDING_CYCLES", - "CounterMask": "1", - "PublicDescription": "Counts duration of L1D miss outstanding in cycles.", + "EventName": "L1D_PEND_MISS.PENDING", + "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -234,21 +236,21 @@ { "EventCode": "0x60", "UMask": "0x1", - "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", + "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore", "Counter": "0,1,2,3", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", - "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD", + "CounterMask": "1", + "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x60", "UMask": "0x1", - "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore", + "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", "Counter": "0,1,2,3", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD", - "CounterMask": "1", - "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", + "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -307,21 +309,21 @@ { "EventCode": "0x60", "UMask": "0x8", - "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore", + "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.", "Counter": "0,1,2,3", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", - "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD", + "CounterMask": "1", + "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x60", "UMask": "0x8", - "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.", + "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore", "Counter": "0,1,2,3", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD", - "CounterMask": "1", - "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", + "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -486,7 +488,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_RETIRED.L1_HIT", - "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.\r\n", + "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3" }, @@ -558,7 +560,7 @@ "PEBS": "1", "Counter": "0,1,2,3", "EventName": "MEM_LOAD_RETIRED.FB_HIT", - "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready. \r\n", + "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" }, @@ -690,6 +692,7 @@ "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared state. A non-threaded event.", "Counter": "0,1,2,3", "EventName": "L2_LINES_OUT.SILENT", + "PublicDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.", "SampleAfterValue": "200003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -699,17 +702,18 @@ "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3. Clean lines may either be allocated in L3 or dropped", "Counter": "0,1,2,3", "EventName": "L2_LINES_OUT.NON_SILENT", - "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3. Clean lines may either be allocated in L3 or dropped.", + "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines are in Modified state. Modified lines are written back to L3", "SampleAfterValue": "200003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xF2", "UMask": "0x4", - "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache", + "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF", + "Deprecated": "1", "Counter": "0,1,2,3", "EventName": "L2_LINES_OUT.USELESS_PREF", - "PublicDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache.", + "PublicDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF", "SampleAfterValue": "200003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -736,12 +740,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that have any response type.", - "MSRValue": "0x0000010001 ", + "BriefDescription": "Counts demand data reads have any response type.", + "MSRValue": "0x0000010001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -749,12 +753,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0001 ", + "BriefDescription": "Counts demand data reads TBD TBD", + "MSRValue": "0x01003C0001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -762,25 +766,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0001 ", + "BriefDescription": "Counts demand data reads TBD TBD", + "MSRValue": "0x04003C0001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "DEMAND_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0001 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -788,12 +779,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0001 ", + "BriefDescription": "Counts demand data reads TBD TBD", + "MSRValue": "0x10003C0001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -801,12 +792,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that hit in the L3.", - "MSRValue": "0x3f803c0001 ", + "BriefDescription": "Counts demand data reads TBD TBD", + "MSRValue": "0x3F803C0001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -814,12 +805,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that have any response type.", - "MSRValue": "0x0000010002 ", + "BriefDescription": "Counts all demand data writes (RFOs) have any response type.", + "MSRValue": "0x0000010002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -827,12 +818,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD", + "MSRValue": "0x01003C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -840,12 +831,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD", + "MSRValue": "0x04003C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -853,25 +844,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "DEMAND_RFO & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0002 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD", + "MSRValue": "0x10003C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -879,12 +857,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3.", - "MSRValue": "0x3f803c0002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD", + "MSRValue": "0x3F803C0002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -892,12 +870,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that have any response type.", - "MSRValue": "0x0000010004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.", + "MSRValue": "0x0000010004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -905,12 +883,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", + "MSRValue": "0x01003C0004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -918,12 +896,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", + "MSRValue": "0x04003C0004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -931,25 +909,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "DEMAND_CODE_RD & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0004 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", + "MSRValue": "0x10003C0004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -957,12 +922,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that hit in the L3.", - "MSRValue": "0x3f803c0004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", + "MSRValue": "0x3F803C0004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -970,12 +935,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.", - "MSRValue": "0x0000010010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads have any response type.", + "MSRValue": "0x0000010010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -983,12 +948,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", + "MSRValue": "0x01003C0010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -996,12 +961,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", + "MSRValue": "0x04003C0010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1009,25 +974,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "PF_L2_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0010 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", + "MSRValue": "0x10003C0010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1035,12 +987,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.", - "MSRValue": "0x3f803c0010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", + "MSRValue": "0x3F803C0010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1048,12 +1000,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.", - "MSRValue": "0x0000010020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.", + "MSRValue": "0x0000010020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1061,12 +1013,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", + "MSRValue": "0x01003C0020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1074,12 +1026,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", + "MSRValue": "0x04003C0020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1087,25 +1039,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "PF_L2_RFO & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0020 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", + "MSRValue": "0x10003C0020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1113,12 +1052,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.", - "MSRValue": "0x3f803c0020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", + "MSRValue": "0x3F803C0020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1126,12 +1065,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.", - "MSRValue": "0x0000010080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.", + "MSRValue": "0x0000010080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1139,12 +1078,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", + "MSRValue": "0x01003C0080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1152,25 +1091,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", + "MSRValue": "0x04003C0080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "PF_L3_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0080 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1178,12 +1104,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", + "MSRValue": "0x10003C0080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1191,12 +1117,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.", - "MSRValue": "0x3f803c0080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", + "MSRValue": "0x3F803C0080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1204,12 +1130,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.", - "MSRValue": "0x0000010100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.", + "MSRValue": "0x0000010100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1217,12 +1143,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", + "MSRValue": "0x01003C0100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1230,12 +1156,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", + "MSRValue": "0x04003C0100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1243,12 +1169,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "PF_L3_RFO & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", + "MSRValue": "0x10003C0100", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1256,12 +1182,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", + "MSRValue": "0x3F803C0100", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1269,12 +1195,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.", - "MSRValue": "0x3f803c0100 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests have any response type.", + "MSRValue": "0x0000010400", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1282,12 +1208,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type.", - "MSRValue": "0x0000010400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", + "MSRValue": "0x01003C0400", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1295,12 +1221,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", + "MSRValue": "0x04003C0400", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1308,12 +1234,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", + "MSRValue": "0x10003C0400", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1321,12 +1247,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "PF_L1D_AND_SW & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", + "MSRValue": "0x3F803C0400", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1334,12 +1260,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0400 ", + "BriefDescription": "TBD have any response type.", + "MSRValue": "0x0000010490", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1347,12 +1273,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3.", - "MSRValue": "0x3f803c0400 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x01003C0490", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1360,12 +1286,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts any other requests that have any response type.", - "MSRValue": "0x0000018000 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x04003C0490", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1373,12 +1299,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c8000 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x10003C0490", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1386,12 +1312,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c8000 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3F803C0490", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1399,12 +1325,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "OTHER & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c8000 ", + "BriefDescription": "TBD have any response type.", + "MSRValue": "0x0000010120", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1412,12 +1338,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c8000 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x01003C0120", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1425,12 +1351,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts any other requests that hit in the L3.", - "MSRValue": "0x3f803c8000 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x04003C0120", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1438,12 +1364,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that have any response type.", - "MSRValue": "0x0000010490 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x10003C0120", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1451,12 +1377,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0490 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3F803C0120", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1464,12 +1390,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0490 ", + "BriefDescription": "TBD have any response type.", + "MSRValue": "0x0000010491", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1477,12 +1403,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "ALL_PF_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0490 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x01003C0491", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1490,12 +1416,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0490 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x04003C0491", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1503,12 +1429,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that hit in the L3.", - "MSRValue": "0x3f803c0490 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x10003C0491", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1516,12 +1442,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that have any response type.", - "MSRValue": "0x0000010120 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3F803C0491", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1529,12 +1455,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0120 ", + "BriefDescription": "TBD have any response type.", + "MSRValue": "0x0000010122", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD have any response type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1542,12 +1468,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0120 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x01003C0122", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1555,12 +1481,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "ALL_PF_RFO & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0120 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x04003C0122", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1568,12 +1494,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0120 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x10003C0122", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1581,12 +1507,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that hit in the L3.", - "MSRValue": "0x3f803c0120 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3F803C0122", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1594,12 +1520,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that have any response type.", - "MSRValue": "0x0000010491 ", + "BriefDescription": "Counts demand data reads", + "MSRValue": "0x08007C0001", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts demand data reads", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1607,12 +1532,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0491 ", + "BriefDescription": "Counts all demand data writes (RFOs)", + "MSRValue": "0x08007C0002", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts all demand data writes (RFOs)", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1620,12 +1544,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0491 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", + "MSRValue": "0x08007C0004", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1633,12 +1556,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "ALL_DATA_RD & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0491 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads", + "MSRValue": "0x08007C0010", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1646,12 +1568,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0491 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs", + "MSRValue": "0x08007C0020", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1659,12 +1580,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3.", - "MSRValue": "0x3f803c0491 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads", + "MSRValue": "0x08007C0080", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1672,12 +1592,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that have any response type.", - "MSRValue": "0x0000010122 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs", + "MSRValue": "0x08007C0100", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1685,12 +1604,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "MSRValue": "0x01003c0122 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests", + "MSRValue": "0x08007C0400", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1698,12 +1616,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x04003c0122 ", + "BriefDescription": "TBD", + "MSRValue": "0x08007C0490", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1711,12 +1628,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "ALL_RFO & L3_HIT & SNOOP_HIT_WITH_FWD", - "MSRValue": "0x08003c0122 ", + "BriefDescription": "TBD", + "MSRValue": "0x08007C0120", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1724,12 +1640,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "MSRValue": "0x10003c0122 ", + "BriefDescription": "TBD", + "MSRValue": "0x08007C0491", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1737,12 +1652,11 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3.", - "MSRValue": "0x3f803c0122 ", + "BriefDescription": "TBD", + "MSRValue": "0x08007C0122", "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", + "PublicDescription": "TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json index 286ed1a37ec9..c5d0babe89fc 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json @@ -59,7 +59,6 @@ "BriefDescription": "Number of Packed Double-Precision FP arithmetic instructions (Use operation multiplier of 8)", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE", - "PublicDescription": "Number of Packed Double-Precision FP arithmetic instructions (Use operation multiplier of 8).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -69,7 +68,6 @@ "BriefDescription": "Number of Packed Single-Precision FP arithmetic instructions (Use operation multiplier of 16)", "Counter": "0,1,2,3", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE", - "PublicDescription": "Number of Packed Single-Precision FP arithmetic instructions (Use operation multiplier of 16).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, diff --git a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json index 403a4f89e9b2..4dc583cfb545 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json @@ -2,16 +2,6 @@ { "EventCode": "0x79", "UMask": "0x4", - "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path", - "Counter": "0,1,2,3", - "EventName": "IDQ.MITE_UOPS", - "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).", - "SampleAfterValue": "2000003", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0x79", - "UMask": "0x4", "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path", "Counter": "0,1,2,3", "EventName": "IDQ.MITE_CYCLES", @@ -22,11 +12,11 @@ }, { "EventCode": "0x79", - "UMask": "0x8", - "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path", + "UMask": "0x4", + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path", "Counter": "0,1,2,3", - "EventName": "IDQ.DSB_UOPS", - "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.", + "EventName": "IDQ.MITE_UOPS", + "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -43,6 +33,16 @@ }, { "EventCode": "0x79", + "UMask": "0x8", + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path", + "Counter": "0,1,2,3", + "EventName": "IDQ.DSB_UOPS", + "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.", + "SampleAfterValue": "2000003", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0x79", "UMask": "0x10", "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy", "Counter": "0,1,2,3", @@ -55,22 +55,22 @@ { "EventCode": "0x79", "UMask": "0x18", - "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops", + "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop", "Counter": "0,1,2,3", - "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS", - "CounterMask": "4", - "PublicDescription": "Counts the number of cycles 4 uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.", + "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS", + "CounterMask": "1", + "PublicDescription": "Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x79", "UMask": "0x18", - "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop", + "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops", "Counter": "0,1,2,3", - "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS", - "CounterMask": "1", - "PublicDescription": "Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.", + "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS", + "CounterMask": "4", + "PublicDescription": "Counts the number of cycles 4 uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -87,22 +87,22 @@ { "EventCode": "0x79", "UMask": "0x24", - "BriefDescription": "Cycles MITE is delivering 4 Uops", + "BriefDescription": "Cycles MITE is delivering any Uop", "Counter": "0,1,2,3", - "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS", - "CounterMask": "4", - "PublicDescription": "Counts the number of cycles 4 uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).", + "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS", + "CounterMask": "1", + "PublicDescription": "Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x79", "UMask": "0x24", - "BriefDescription": "Cycles MITE is delivering any Uop", + "BriefDescription": "Cycles MITE is delivering 4 Uops", "Counter": "0,1,2,3", - "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS", - "CounterMask": "1", - "PublicDescription": "Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).", + "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS", + "CounterMask": "4", + "PublicDescription": "Counts the number of cycles 4 uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -118,24 +118,24 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EdgeDetect": "1", "EventCode": "0x79", "UMask": "0x30", - "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer", + "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy", "Counter": "0,1,2,3", - "EventName": "IDQ.MS_SWITCHES", - "CounterMask": "1", - "PublicDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.", + "EventName": "IDQ.MS_UOPS", + "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "EdgeDetect": "1", "EventCode": "0x79", "UMask": "0x30", - "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy", + "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer", "Counter": "0,1,2,3", - "EventName": "IDQ.MS_UOPS", - "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.", + "EventName": "IDQ.MS_SWITCHES", + "CounterMask": "1", + "PublicDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -177,67 +177,67 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "Invert": "1", "EventCode": "0x9C", "UMask": "0x1", - "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled", + "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.", "Counter": "0,1,2,3", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", - "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4 x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions). c. Instruction Decode Queue (IDQ) delivers four uops.", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", + "CounterMask": "1", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x9C", "UMask": "0x1", - "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled", + "BriefDescription": "Cycles with less than 3 uops delivered by the front end.", "Counter": "0,1,2,3", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", - "CounterMask": "4", - "PublicDescription": "Counts, on the per-thread basis, cycles when no uops are delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core =4.", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE", + "CounterMask": "1", + "PublicDescription": "Cycles with less than 3 uops delivered by the front-end.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x9C", "UMask": "0x1", - "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled", + "BriefDescription": "Cycles with less than 2 uops delivered by the front end.", "Counter": "0,1,2,3", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE", - "CounterMask": "3", - "PublicDescription": "Counts, on the per-thread basis, cycles when less than 1 uop is delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core >= 3.", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE", + "CounterMask": "2", + "PublicDescription": "Cycles with less than 2 uops delivered by the front-end.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x9C", "UMask": "0x1", - "BriefDescription": "Cycles with less than 2 uops delivered by the front end.", + "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled", "Counter": "0,1,2,3", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE", - "CounterMask": "2", - "PublicDescription": "Cycles with less than 2 uops delivered by the front-end.", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE", + "CounterMask": "3", + "PublicDescription": "Counts, on the per-thread basis, cycles when less than 1 uop is delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core >= 3.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x9C", "UMask": "0x1", - "BriefDescription": "Cycles with less than 3 uops delivered by the front end.", + "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled", "Counter": "0,1,2,3", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE", - "CounterMask": "1", - "PublicDescription": "Cycles with less than 3 uops delivered by the front-end.", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", + "CounterMask": "4", + "PublicDescription": "Counts, on the per-thread basis, cycles when no uops are delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core =4.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "Invert": "1", "EventCode": "0x9C", "UMask": "0x1", - "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.", + "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled", "Counter": "0,1,2,3", - "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", - "CounterMask": "1", + "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", + "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding \u201c4 \u2013 x\u201d when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions). c. Instruction Decode Queue (IDQ) delivers four uops.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -247,20 +247,19 @@ "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.", "Counter": "0,1,2,3", "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES", - "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.", + "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 0\u20132 cycles.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x11", + "MSRValue": "0x400406", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.DSB_MISS", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_4", "MSRIndex": "0x3F7", - "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. \r\n", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -268,11 +267,11 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x12", + "MSRValue": "0x200206", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.L1I_MISS", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_2", "MSRIndex": "0x3F7", "TakenAlone": "1", "SampleAfterValue": "100007", @@ -281,11 +280,11 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x13", + "MSRValue": "0x400206", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.L2_MISS", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_2", "MSRIndex": "0x3F7", "TakenAlone": "1", "SampleAfterValue": "100007", @@ -294,13 +293,13 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired Instructions who experienced iTLB true miss. Precise Event.", + "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss. Precise Event.", "PEBS": "1", - "MSRValue": "0x14", + "MSRValue": "0x15", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.ITLB_MISS", + "EventName": "FRONTEND_RETIRED.STLB_MISS", "MSRIndex": "0x3F7", - "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.", + "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -308,13 +307,13 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss. Precise Event.", + "BriefDescription": "Retired Instructions who experienced iTLB true miss. Precise Event.", "PEBS": "1", - "MSRValue": "0x15", + "MSRValue": "0x14", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.STLB_MISS", + "EventName": "FRONTEND_RETIRED.ITLB_MISS", "MSRIndex": "0x3F7", - "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.", + "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -322,11 +321,11 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss. Precise Event.", "PEBS": "1", - "MSRValue": "0x400206", + "MSRValue": "0x13", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_2", + "EventName": "FRONTEND_RETIRED.L2_MISS", "MSRIndex": "0x3F7", "TakenAlone": "1", "SampleAfterValue": "100007", @@ -335,11 +334,11 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss. Precise Event.", "PEBS": "1", - "MSRValue": "0x200206", + "MSRValue": "0x12", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_2", + "EventName": "FRONTEND_RETIRED.L1I_MISS", "MSRIndex": "0x3F7", "TakenAlone": "1", "SampleAfterValue": "100007", @@ -348,12 +347,13 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss. Precise Event.", "PEBS": "1", - "MSRValue": "0x400406", + "MSRValue": "0x11", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_4", + "EventName": "FRONTEND_RETIRED.DSB_MISS", "MSRIndex": "0x3F7", + "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -361,13 +361,12 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x400806", + "MSRValue": "0x300206", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_8", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_3", "MSRIndex": "0x3F7", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops. \r\n", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -375,13 +374,13 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x401006", + "MSRValue": "0x100206", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_16", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1", "MSRIndex": "0x3F7", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.\r\n", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -389,13 +388,12 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x402006", + "MSRValue": "0x420006", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_32", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_512", "MSRIndex": "0x3F7", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.\r\n", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -403,11 +401,11 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x404006", + "MSRValue": "0x410006", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_64", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_256", "MSRIndex": "0x3F7", "TakenAlone": "1", "SampleAfterValue": "100007", @@ -429,11 +427,11 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x410006", + "MSRValue": "0x404006", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_256", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_64", "MSRIndex": "0x3F7", "TakenAlone": "1", "SampleAfterValue": "100007", @@ -442,12 +440,13 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x420006", + "MSRValue": "0x402006", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_512", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_32", "MSRIndex": "0x3F7", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -455,13 +454,13 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall. Precise Event.", "PEBS": "1", - "MSRValue": "0x100206", + "MSRValue": "0x401006", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_16", "MSRIndex": "0x3F7", - "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.\r\n", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" @@ -469,12 +468,13 @@ { "EventCode": "0xC6", "UMask": "0x1", - "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.", + "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.", "PEBS": "1", - "MSRValue": "0x300206", + "MSRValue": "0x400806", "Counter": "0,1,2,3", - "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_3", + "EventName": "FRONTEND_RETIRED.LATENCY_GE_8", "MSRIndex": "0x3F7", + "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.", "TakenAlone": "1", "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" diff --git a/tools/perf/pmu-events/arch/x86/skylakex/memory.json b/tools/perf/pmu-events/arch/x86/skylakex/memory.json index e7f1aa31226d..48a9cdf81307 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/memory.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/memory.json @@ -129,20 +129,20 @@ { "EventCode": "0x60", "UMask": "0x10", - "BriefDescription": "Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.", + "BriefDescription": "Cycles with at least 6 Demand Data Read requests that miss L3 cache in the superQ.", "Counter": "0,1,2,3", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_L3_MISS_DEMAND_DATA_RD", - "CounterMask": "1", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD_GE_6", + "CounterMask": "6", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x60", "UMask": "0x10", - "BriefDescription": "Cycles with at least 6 Demand Data Read requests that miss L3 cache in the superQ.", + "BriefDescription": "Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.", "Counter": "0,1,2,3", - "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD_GE_6", - "CounterMask": "6", + "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_L3_MISS_DEMAND_DATA_RD", + "CounterMask": "1", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -210,7 +210,7 @@ { "EventCode": "0xC8", "UMask": "0x4", - "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one). ", + "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one).", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "HLE_RETIRED.ABORTED", @@ -242,6 +242,7 @@ "BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).", "Counter": "0,1,2,3", "EventName": "HLE_RETIRED.ABORTED_UNFRIENDLY", + "PublicDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -287,7 +288,7 @@ { "EventCode": "0xC9", "UMask": "0x4", - "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one). ", + "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one).", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "RTM_RETIRED.ABORTED", @@ -347,125 +348,125 @@ { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 4 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.", "PEBS": "2", - "MSRValue": "0x4", + "MSRValue": "0x200", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 4 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "100003", + "SampleAfterValue": "101", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 8 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.", "PEBS": "2", - "MSRValue": "0x8", + "MSRValue": "0x100", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 8 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "50021", + "SampleAfterValue": "503", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 16 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.", "PEBS": "2", - "MSRValue": "0x10", + "MSRValue": "0x80", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 16 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "20011", + "SampleAfterValue": "1009", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 32 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.", "PEBS": "2", - "MSRValue": "0x20", + "MSRValue": "0x40", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 32 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "100007", + "SampleAfterValue": "2003", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 64 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.", "PEBS": "2", - "MSRValue": "0x40", + "MSRValue": "0x20", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 64 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "2003", + "SampleAfterValue": "100007", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 128 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.", "PEBS": "2", - "MSRValue": "0x80", + "MSRValue": "0x10", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 128 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "1009", + "SampleAfterValue": "20011", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 256 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.", "PEBS": "2", - "MSRValue": "0x100", + "MSRValue": "0x8", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 256 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "503", + "SampleAfterValue": "50021", "CounterHTOff": "0,1,2,3" }, { "EventCode": "0xCD", "UMask": "0x1", - "BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 512 cycles.", + "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.", "PEBS": "2", - "MSRValue": "0x200", + "MSRValue": "0x4", "Counter": "0,1,2,3", - "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512", + "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4", "MSRIndex": "0x3F6", - "PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 512 cycles. Reported latency may be longer than just the memory latency.", + "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles. Reported latency may be longer than just the memory latency.", "TakenAlone": "1", - "SampleAfterValue": "101", + "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, { "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss in the L3.", - "MSRValue": "0x3fbc000001 ", + "BriefDescription": "Counts demand data reads TBD TBD", + "MSRValue": "0x3FBC000001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -473,12 +474,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00001 ", + "BriefDescription": "Counts demand data reads TBD", + "MSRValue": "0x083FC00001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -486,12 +487,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00001 ", + "BriefDescription": "Counts demand data reads TBD", + "MSRValue": "0x103FC00001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -499,12 +500,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00001 ", + "BriefDescription": "Counts demand data reads TBD", + "MSRValue": "0x063FC00001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -512,12 +513,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800001 ", + "BriefDescription": "Counts demand data reads TBD", + "MSRValue": "0x063B800001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -525,12 +526,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000001 ", + "BriefDescription": "Counts demand data reads TBD", + "MSRValue": "0x0604000001", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -538,12 +539,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss in the L3.", - "MSRValue": "0x3fbc000002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD TBD", + "MSRValue": "0x3FBC000002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -551,12 +552,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD", + "MSRValue": "0x083FC00002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -564,12 +565,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD", + "MSRValue": "0x103FC00002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -577,12 +578,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD", + "MSRValue": "0x063FC00002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -590,12 +591,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD", + "MSRValue": "0x063B800002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -603,12 +604,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000002 ", + "BriefDescription": "Counts all demand data writes (RFOs) TBD", + "MSRValue": "0x0604000002", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all demand data writes (RFOs) TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -616,12 +617,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss in the L3.", - "MSRValue": "0x3fbc000004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", + "MSRValue": "0x3FBC000004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -629,12 +630,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", + "MSRValue": "0x083FC00004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -642,12 +643,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", + "MSRValue": "0x103FC00004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -655,12 +656,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", + "MSRValue": "0x063FC00004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -668,12 +669,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", + "MSRValue": "0x063B800004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -681,12 +682,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000004 ", + "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", + "MSRValue": "0x0604000004", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -694,12 +695,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3.", - "MSRValue": "0x3fbc000010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", + "MSRValue": "0x3FBC000010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -707,12 +708,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD", + "MSRValue": "0x083FC00010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -720,12 +721,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD", + "MSRValue": "0x103FC00010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -733,12 +734,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD", + "MSRValue": "0x063FC00010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -746,12 +747,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD", + "MSRValue": "0x063B800010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -759,12 +760,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000010 ", + "BriefDescription": "Counts prefetch (that bring data to L2) data reads TBD", + "MSRValue": "0x0604000010", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts prefetch (that bring data to L2) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -772,12 +773,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3.", - "MSRValue": "0x3fbc000020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", + "MSRValue": "0x3FBC000020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -785,12 +786,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", + "MSRValue": "0x083FC00020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -798,12 +799,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", + "MSRValue": "0x103FC00020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -811,12 +812,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", + "MSRValue": "0x063FC00020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -824,12 +825,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", + "MSRValue": "0x063B800020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -837,12 +838,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000020 ", + "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", + "MSRValue": "0x0604000020", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -850,12 +851,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3.", - "MSRValue": "0x3fbc000080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", + "MSRValue": "0x3FBC000080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -863,12 +864,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", + "MSRValue": "0x083FC00080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -876,12 +877,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", + "MSRValue": "0x103FC00080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -889,12 +890,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", + "MSRValue": "0x063FC00080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -902,12 +903,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", + "MSRValue": "0x063B800080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -915,12 +916,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000080 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", + "MSRValue": "0x0604000080", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -928,12 +929,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3.", - "MSRValue": "0x3fbc000100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", + "MSRValue": "0x3FBC000100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -941,12 +942,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", + "MSRValue": "0x083FC00100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -954,12 +955,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", + "MSRValue": "0x103FC00100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -967,12 +968,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", + "MSRValue": "0x063FC00100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -980,12 +981,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", + "MSRValue": "0x063B800100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -993,12 +994,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000100 ", + "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", + "MSRValue": "0x0604000100", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1006,12 +1007,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss in the L3.", - "MSRValue": "0x3fbc000400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", + "MSRValue": "0x3FBC000400", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1019,12 +1020,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", + "MSRValue": "0x083FC00400", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1032,12 +1033,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", + "MSRValue": "0x103FC00400", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1045,12 +1046,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", + "MSRValue": "0x063FC00400", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1058,12 +1059,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", + "MSRValue": "0x063B800400", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1071,90 +1072,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000400 ", + "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", + "MSRValue": "0x0604000400", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts any other requests that miss in the L3.", - "MSRValue": "0x3fbc008000 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts any other requests that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc08000 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts any other requests that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc08000 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts any other requests that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc08000 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts any other requests that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b808000 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "SampleAfterValue": "100003", - "CounterHTOff": "0,1,2,3" - }, - { - "Offcore": "1", - "EventCode": "0xB7, 0xBB", - "UMask": "0x1", - "BriefDescription": "Counts any other requests that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604008000 ", - "Counter": "0,1,2,3", - "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts any other requests that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1162,12 +1085,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that miss in the L3.", - "MSRValue": "0x3fbc000490 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3FBC000490", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1175,12 +1098,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00490 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x083FC00490", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1188,12 +1111,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00490 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x103FC00490", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1201,12 +1124,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00490 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063FC00490", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1214,12 +1137,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800490 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063B800490", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1227,12 +1150,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000490 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x0604000490", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1240,12 +1163,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that miss in the L3.", - "MSRValue": "0x3fbc000120 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3FBC000120", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1253,12 +1176,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00120 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x083FC00120", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1266,12 +1189,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00120 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x103FC00120", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1279,12 +1202,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00120 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063FC00120", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1292,12 +1215,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800120 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063B800120", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1305,12 +1228,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000120 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x0604000120", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1318,12 +1241,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss in the L3.", - "MSRValue": "0x3fbc000491 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3FBC000491", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1331,12 +1254,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00491 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x083FC00491", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1344,12 +1267,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00491 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x103FC00491", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1357,12 +1280,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00491 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063FC00491", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1370,12 +1293,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800491 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063B800491", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1383,12 +1306,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000491 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x0604000491", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1396,12 +1319,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss in the L3.", - "MSRValue": "0x3fbc000122 ", + "BriefDescription": "TBD TBD TBD", + "MSRValue": "0x3FBC000122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.ANY_SNOOP", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1409,12 +1332,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache.", - "MSRValue": "0x083fc00122 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x083FC00122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1422,12 +1345,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the modified data is transferred from remote cache.", - "MSRValue": "0x103fc00122 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x103FC00122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HITM", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1435,12 +1358,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local or remote dram.", - "MSRValue": "0x063fc00122 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063FC00122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1448,12 +1371,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from remote dram.", - "MSRValue": "0x063b800122 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x063B800122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" }, @@ -1461,12 +1384,12 @@ "Offcore": "1", "EventCode": "0xB7, 0xBB", "UMask": "0x1", - "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram.", - "MSRValue": "0x0604000122 ", + "BriefDescription": "TBD TBD", + "MSRValue": "0x0604000122", "Counter": "0,1,2,3", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD", - "MSRIndex": "0x1a6,0x1a7", - "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", + "MSRIndex": "0x1a6, 0x1a7", + "PublicDescription": "TBD TBD", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3" } diff --git a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json index f99f7ae27820..369f56c1d1b5 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json @@ -1,6 +1,5 @@ [ { - "EventCode": "0x00", "UMask": "0x1", "BriefDescription": "Instructions retired from execution.", "Counter": "Fixed counter 0", @@ -10,7 +9,6 @@ "CounterHTOff": "Fixed counter 0" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when the thread is not in halt state", "Counter": "Fixed counter 1", @@ -20,7 +18,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x2", "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.", "Counter": "Fixed counter 1", @@ -30,7 +27,6 @@ "CounterHTOff": "Fixed counter 1" }, { - "EventCode": "0x00", "UMask": "0x3", "BriefDescription": "Reference cycles when the core is not in halt state.", "Counter": "Fixed counter 2", @@ -99,24 +95,24 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "Invert": "1", "EventCode": "0x0E", "UMask": "0x1", - "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)", + "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread", "Counter": "0,1,2,3", - "EventName": "UOPS_ISSUED.ANY", - "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).", + "EventName": "UOPS_ISSUED.STALL_CYCLES", + "CounterMask": "1", + "PublicDescription": "Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "Invert": "1", "EventCode": "0x0E", "UMask": "0x1", - "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread", + "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)", "Counter": "0,1,2,3", - "EventName": "UOPS_ISSUED.STALL_CYCLES", - "CounterMask": "1", - "PublicDescription": "Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.", + "EventName": "UOPS_ISSUED.ANY", + "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -126,7 +122,7 @@ "BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.", "Counter": "0,1,2,3", "EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH", - "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.", + "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to \u201cMixing Intel AVX and Intel SSE Code\u201d section of the Optimization Guide.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -203,19 +199,19 @@ { "EventCode": "0x3C", "UMask": "0x1", - "BriefDescription": "Core crystal clock cycles when the thread is unhalted.", + "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.", "Counter": "0,1,2,3", - "EventName": "CPU_CLK_UNHALTED.REF_XCLK", + "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY", + "AnyThread": "1", "SampleAfterValue": "2503", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0x3C", "UMask": "0x1", - "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.", + "BriefDescription": "Core crystal clock cycles when the thread is unhalted.", "Counter": "0,1,2,3", - "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY", - "AnyThread": "1", + "EventName": "CPU_CLK_UNHALTED.REF_XCLK", "SampleAfterValue": "2503", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -248,12 +244,12 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0x5E", + "EventCode": "0x59", "UMask": "0x1", - "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread", + "BriefDescription": "Cycles where the pipeline is stalled due to serializing operations.", "Counter": "0,1,2,3", - "EventName": "RS_EVENTS.EMPTY_CYCLES", - "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.", + "EventName": "PARTIAL_RAT_STALLS.SCOREBOARD", + "PublicDescription": "This event counts cycles during which the microcode scoreboard stalls happen.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -271,6 +267,16 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "EventCode": "0x5E", + "UMask": "0x1", + "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread", + "Counter": "0,1,2,3", + "EventName": "RS_EVENTS.EMPTY_CYCLES", + "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.", + "SampleAfterValue": "2000003", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "EventCode": "0x87", "UMask": "0x1", "BriefDescription": "Stalls caused by changing prefix length of the instruction.", @@ -361,12 +367,12 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA2", + "EventCode": "0xa2", "UMask": "0x1", "BriefDescription": "Resource-related stall cycles", "Counter": "0,1,2,3", "EventName": "RESOURCE_STALLS.ANY", - "PublicDescription": "Counts resource-related stall cycles. Reasons for stalls can be as follows:a. *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots).b. *any* u-arch structure got empty (like INT/SIMD FreeLists).c. FPU control word (FPCW), MXCSR.and others. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.", + "PublicDescription": "Counts resource-related stall cycles.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -522,6 +528,17 @@ { "EventCode": "0xA8", "UMask": "0x1", + "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.", + "Counter": "0,1,2,3", + "EventName": "LSD.CYCLES_4_UOPS", + "CounterMask": "4", + "PublicDescription": "Counts the cycles when 4 uops are delivered by the LSD (Loop-stream detector).", + "SampleAfterValue": "2000003", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { + "EventCode": "0xA8", + "UMask": "0x1", "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.", "Counter": "0,1,2,3", "EventName": "LSD.CYCLES_ACTIVE", @@ -531,35 +548,35 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "EventCode": "0xA8", + "EventCode": "0xB1", "UMask": "0x1", - "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.", + "BriefDescription": "Cycles where at least 4 uops were executed per-thread", "Counter": "0,1,2,3", - "EventName": "LSD.CYCLES_4_UOPS", + "EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC", "CounterMask": "4", - "PublicDescription": "Counts the cycles when 4 uops are delivered by the LSD (Loop-stream detector).", + "PublicDescription": "Cycles where at least 4 uops were executed per-thread.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xB1", "UMask": "0x1", - "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.", + "BriefDescription": "Cycles where at least 3 uops were executed per-thread", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.THREAD", - "PublicDescription": "Number of uops to be executed per-thread each cycle.", + "EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC", + "CounterMask": "3", + "PublicDescription": "Cycles where at least 3 uops were executed per-thread.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "Invert": "1", "EventCode": "0xB1", "UMask": "0x1", - "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.", + "BriefDescription": "Cycles where at least 2 uops were executed per-thread", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.STALL_CYCLES", - "CounterMask": "1", - "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.", + "EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC", + "CounterMask": "2", + "PublicDescription": "Cycles where at least 2 uops were executed per-thread.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -575,35 +592,24 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "Invert": "1", "EventCode": "0xB1", "UMask": "0x1", - "BriefDescription": "Cycles where at least 2 uops were executed per-thread", - "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC", - "CounterMask": "2", - "PublicDescription": "Cycles where at least 2 uops were executed per-thread.", - "SampleAfterValue": "2000003", - "CounterHTOff": "0,1,2,3,4,5,6,7" - }, - { - "EventCode": "0xB1", - "UMask": "0x1", - "BriefDescription": "Cycles where at least 3 uops were executed per-thread", + "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC", - "CounterMask": "3", - "PublicDescription": "Cycles where at least 3 uops were executed per-thread.", + "EventName": "UOPS_EXECUTED.STALL_CYCLES", + "CounterMask": "1", + "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { "EventCode": "0xB1", "UMask": "0x1", - "BriefDescription": "Cycles where at least 4 uops were executed per-thread", + "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC", - "CounterMask": "4", - "PublicDescription": "Cycles where at least 4 uops were executed per-thread.", + "EventName": "UOPS_EXECUTED.THREAD", + "PublicDescription": "Number of uops to be executed per-thread each cycle.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -618,11 +624,12 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "Invert": "1", "EventCode": "0xB1", "UMask": "0x2", - "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.", + "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE", "CounterMask": "1", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" @@ -630,10 +637,10 @@ { "EventCode": "0xB1", "UMask": "0x2", - "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.", + "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2", - "CounterMask": "2", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4", + "CounterMask": "4", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -650,20 +657,19 @@ { "EventCode": "0xB1", "UMask": "0x2", - "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.", + "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4", - "CounterMask": "4", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2", + "CounterMask": "2", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "Invert": "1", "EventCode": "0xB1", "UMask": "0x2", - "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.", + "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.", "Counter": "0,1,2,3", - "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE", + "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1", "CounterMask": "1", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" @@ -725,12 +731,14 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "Invert": "1", "EventCode": "0xC2", "UMask": "0x2", - "BriefDescription": "Retirement slots used.", + "BriefDescription": "Cycles with less than 10 actually retired uops.", "Counter": "0,1,2,3", - "EventName": "UOPS_RETIRED.RETIRE_SLOTS", - "PublicDescription": "Counts the retirement slots used.", + "EventName": "UOPS_RETIRED.TOTAL_CYCLES", + "CounterMask": "10", + "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -742,19 +750,17 @@ "Counter": "0,1,2,3", "EventName": "UOPS_RETIRED.STALL_CYCLES", "CounterMask": "1", - "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts cycles without actually retired uops.", + "PublicDescription": "This event counts cycles without actually retired uops.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, { - "Invert": "1", "EventCode": "0xC2", "UMask": "0x2", - "BriefDescription": "Cycles with less than 10 actually retired uops.", + "BriefDescription": "Retirement slots used.", "Counter": "0,1,2,3", - "EventName": "UOPS_RETIRED.TOTAL_CYCLES", - "CounterMask": "10", - "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.", + "EventName": "UOPS_RETIRED.RETIRE_SLOTS", + "PublicDescription": "Counts the retirement slots used.", "SampleAfterValue": "2000003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -766,6 +772,7 @@ "Counter": "0,1,2,3", "EventName": "MACHINE_CLEARS.COUNT", "CounterMask": "1", + "PublicDescription": "Number of machine clears (nukes) of any type.", "SampleAfterValue": "100003", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -841,11 +848,12 @@ { "EventCode": "0xC4", "UMask": "0x10", - "BriefDescription": "Not taken branch instructions retired.", + "BriefDescription": "Counts all not taken macro branch instructions retired.", + "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_INST_RETIRED.NOT_TAKEN", "Errata": "SKL091", - "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts not taken branch instructions retired.", + "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts not taken branch instructions retired.", "SampleAfterValue": "400009", "CounterHTOff": "0,1,2,3,4,5,6,7" }, @@ -919,7 +927,7 @@ { "EventCode": "0xC5", "UMask": "0x20", - "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken. ", + "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.", "PEBS": "1", "Counter": "0,1,2,3", "EventName": "BR_MISP_RETIRED.NEAR_TAKEN", @@ -938,6 +946,15 @@ "CounterHTOff": "0,1,2,3,4,5,6,7" }, { + "EventCode": "0xCC", + "UMask": "0x40", + "BriefDescription": "Number of retired PAUSE instructions (that do not end up with a VMExit to the VMM; TSX aborted Instructions may be counted). This event is not supported on first SKL and KBL products.", + "Counter": "0,1,2,3", + "EventName": "ROB_MISC_EVENTS.PAUSE_INST", + "SampleAfterValue": "2000003", + "CounterHTOff": "0,1,2,3,4,5,6,7" + }, + { "EventCode": "0xE6", "UMask": "0x1", "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.", diff --git a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json index 71e9737f4614..56e03ba771f4 100644 --- a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json +++ b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json @@ -1,164 +1,394 @@ [ { - "BriefDescription": "Instructions Per Cycle (per logical thread)", + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Frontend_Bound" + }, + { + "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-ops (uops). Ideally the Frontend can issue 4 uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Frontend_Bound_SMT" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations", + "MetricGroup": "TopdownL1", + "MetricName": "Bad_Speculation" + }, + { + "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Bad_Speculation_SMT" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend", + "MetricGroup": "TopdownL1", + "MetricName": "Backend_Bound" + }, + { + "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) )", + "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Backend_Bound_SMT" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. ", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired", + "MetricGroup": "TopdownL1", + "MetricName": "Retiring" + }, + { + "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))", + "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category. Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved. Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance. For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU.", + "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.", + "MetricGroup": "TopdownL1_SMT", + "MetricName": "Retiring_SMT" + }, + { "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Instructions Per Cycle (per logical thread)", "MetricGroup": "TopDownL1", "MetricName": "IPC" }, { - "BriefDescription": "Uops Per Instruction", "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY", - "MetricGroup": "Pipeline", + "BriefDescription": "Uops Per Instruction", + "MetricGroup": "Pipeline;Retiring", "MetricName": "UPI" }, { - "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions", - "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ((UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 64 * ( ICACHE_64B.IFTAG_HIT + ICACHE_64B.IFTAG_MISS ) / 4.1) )", - "MetricGroup": "Frontend", + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Instruction per taken branch", + "MetricGroup": "Branches;PGO", + "MetricName": "IpTB" + }, + { + "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN", + "BriefDescription": "Branch instructions per taken branch. ", + "MetricGroup": "Branches;PGO", + "MetricName": "BpTB" + }, + { + "MetricExpr": "min( 1 , UOPS_ISSUED.ANY / ( (UOPS_RETIRED.RETIRE_SLOTS / INST_RETIRED.ANY) * 64 * ( ICACHE_64B.IFTAG_HIT + ICACHE_64B.IFTAG_MISS ) / 4.1 ) )", + "BriefDescription": "Rough Estimation of fraction of fetched lines bytes that were likely (includes speculatively fetches) consumed by program instructions", + "MetricGroup": "PGO", "MetricName": "IFetch_Line_Utilization" }, { - "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)", - "MetricExpr": "IDQ.DSB_UOPS / ( IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS )", - "MetricGroup": "DSB; Frontend_Bandwidth", + "MetricExpr": "IDQ.DSB_UOPS / (( IDQ.DSB_UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS ))", + "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)", + "MetricGroup": "DSB;Frontend_Bandwidth", "MetricName": "DSB_Coverage" }, { - "BriefDescription": "Cycles Per Instruction (threaded)", "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)", + "BriefDescription": "Cycles Per Instruction (threaded)", "MetricGroup": "Pipeline;Summary", "MetricName": "CPI" }, { - "BriefDescription": "Per-thread actual clocks when the logical processor is active. This is called 'Clockticks' in VTune.", "MetricExpr": "CPU_CLK_UNHALTED.THREAD", + "BriefDescription": "Per-thread actual clocks when the logical processor is active.", "MetricGroup": "Summary", "MetricName": "CLKS" }, { - "BriefDescription": "Total issue-pipeline slots", - "MetricExpr": "4*(( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", + "MetricExpr": "4 * cycles", + "BriefDescription": "Total issue-pipeline slots (per core)", "MetricGroup": "TopDownL1", "MetricName": "SLOTS" }, { - "BriefDescription": "Total number of retired Instructions", + "MetricExpr": "4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Total issue-pipeline slots (per core)", + "MetricGroup": "TopDownL1_SMT", + "MetricName": "SLOTS_SMT" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS", + "BriefDescription": "Instructions per Load (lower number means loads are more frequent)", + "MetricGroup": "Instruction_Type;L1_Bound", + "MetricName": "IpL" + }, + { + "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES", + "BriefDescription": "Instructions per Store", + "MetricGroup": "Instruction_Type;Store_Bound", + "MetricName": "IpS" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES", + "BriefDescription": "Instructions per Branch", + "MetricGroup": "Branches;Instruction_Type;Port_5;Port_6", + "MetricName": "IpB" + }, + { + "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL", + "BriefDescription": "Instruction per (near) call", + "MetricGroup": "Branches", + "MetricName": "IpCall" + }, + { "MetricExpr": "INST_RETIRED.ANY", + "BriefDescription": "Total number of retired Instructions", "MetricGroup": "Summary", "MetricName": "Instructions" }, { + "MetricExpr": "INST_RETIRED.ANY / cycles", "BriefDescription": "Instructions Per Cycle (per physical core)", - "MetricExpr": "INST_RETIRED.ANY / (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles)", "MetricGroup": "SMT", "MetricName": "CoreIPC" }, { + "MetricExpr": "INST_RETIRED.ANY / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Instructions Per Cycle (per physical core)", + "MetricGroup": "SMT", + "MetricName": "CoreIPC_SMT" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )) / cycles", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS", + "MetricName": "FLOPc" + }, + { + "MetricExpr": "(( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )) / (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))", + "BriefDescription": "Floating Point Operations Per Cycle", + "MetricGroup": "FLOPS_SMT", + "MetricName": "FLOPc_SMT" + }, + { + "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)", "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)", - "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)", "MetricGroup": "Pipeline;Ports_Utilization", "MetricName": "ILP" }, { - "BriefDescription": "Average Branch Address Clear Cost (fraction of cycles)", - "MetricExpr": "2* (( RS_EVENTS.EMPTY_CYCLES - ICACHE_16B.IFDATA_STALL - ICACHE_64B.IFTAG_STALL ) / RS_EVENTS.EMPTY_END)", - "MetricGroup": "Unknown_Branches", - "MetricName": "BAClear_Cost" + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "Branch_Misprediction_Cost" + }, + { + "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * (( INT_MISC.RECOVERY_CYCLES_ANY / 2 )) ) / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))))) + (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE / (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) ) * (4 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per branch misprediction (jeclear and baclear)", + "MetricGroup": "Branch_Mispredicts_SMT", + "MetricName": "Branch_Misprediction_Cost_SMT" }, { + "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES", + "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)", + "MetricGroup": "Branch_Mispredicts", + "MetricName": "IpMispredict" + }, + { + "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )", "BriefDescription": "Core actual clocks when any thread is active on the physical core", - "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD", "MetricGroup": "SMT", "MetricName": "CORE_CLKS" }, { - "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads", "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )", + "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)", "MetricGroup": "Memory_Bound;Memory_Lat", "MetricName": "Load_Miss_Real_Latency" }, { - "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)", - "MetricExpr": "L1D_PEND_MISS.PENDING / (( L1D_PEND_MISS.PENDING_CYCLES_ANY / 2) if #SMT_on else L1D_PEND_MISS.PENDING_CYCLES)", + "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES", + "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-thread)", "MetricGroup": "Memory_Bound;Memory_BW", "MetricName": "MLP" }, { + "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * cycles )", "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", - "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * (( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles) )", "MetricGroup": "TLB", "MetricName": "Page_Walks_Utilization" }, { - "BriefDescription": "Average CPU Utilization", + "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * (( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) )", + "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses", + "MetricGroup": "TLB_SMT", + "MetricName": "Page_Walks_Utilization_SMT" + }, + { + "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L1D_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time", + "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L2_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Fill_BW" + }, + { + "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time", + "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "L3_Cache_Access_BW" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY", + "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L1MPKI" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI" + }, + { + "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY", + "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2MPKI_All" + }, + { + "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY", + "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)", + "MetricGroup": "Cache_Misses;", + "MetricName": "L2HPKI_All" + }, + { + "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY", + "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads", + "MetricGroup": "Cache_Misses;", + "MetricName": "L3MPKI" + }, + { "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@", + "BriefDescription": "Average CPU Utilization", "MetricGroup": "Summary", "MetricName": "CPU_Utilization" }, { + "MetricExpr": "( (( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )) / 1000000000 ) / duration_time", "BriefDescription": "Giga Floating Point Operations Per Second", - "MetricExpr": "(( 1*( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2* FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4*( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8* FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE )) / 1000000000 / duration_time", "MetricGroup": "FLOPS;Summary", "MetricName": "GFLOPs" }, { - "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Average Frequency Utilization relative nominal frequency", "MetricGroup": "Power", "MetricName": "Turbo_Utilization" }, { - "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0", + "BriefDescription": "Fraction of cycles where both hardware threads were active", "MetricGroup": "SMT;Summary", "MetricName": "SMT_2T_Utilization" }, { - "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC:u / CPU_CLK_UNHALTED.REF_TSC", + "BriefDescription": "Fraction of cycles spent in Kernel mode", "MetricGroup": "Summary", "MetricName": "Kernel_Utilization" }, { - "BriefDescription": "C3 residency percent per core", + "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time", + "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_BW_Use" + }, + { + "MetricExpr": "1000000000 * ( cha@event\\=0x36\\\\\\,umask\\=0x21@ / cha@event\\=0x35\\\\\\,umask\\=0x21@ ) / ( cha_0@event\\=0x0@ / duration_time )", + "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_Lat", + "MetricName": "DRAM_Read_Latency" + }, + { + "MetricExpr": "cha@event\\=0x36\\\\\\,umask\\=0x21@ / cha@event\\=0x36\\\\\\,umask\\=0x21\\\\\\,thresh\\=1@", + "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches", + "MetricGroup": "Memory_BW", + "MetricName": "DRAM_Parallel_Reads" + }, + { + "MetricExpr": "( 1000000000 * ( imc@event\\=0xe0\\\\\\,umask\\=0x1@ / imc@event\\=0xe3@ ) / imc_0@event\\=0x0@ ) if 1 if 0 == 1 else 0 else 0", + "BriefDescription": "Average latency of data read request to external 3D X-Point memory [in nanoseconds]. Accounts for demand loads and L1/L2 data-read prefetches", + "MetricGroup": "Memory_Lat", + "MetricName": "MEM_PMM_Read_Latency" + }, + { + "MetricExpr": "( ( 64 * imc@event\\=0xe3@ / 1000000000 ) / duration_time ) if 1 if 0 == 1 else 0 else 0", + "BriefDescription": "Average 3DXP Memory Bandwidth Use for reads [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "PMM_Read_BW" + }, + { + "MetricExpr": "( ( 64 * imc@event\\=0xe7@ / 1000000000 ) / duration_time ) if 1 if 0 == 1 else 0 else 0", + "BriefDescription": "Average 3DXP Memory Bandwidth Use for Writes [GB / sec]", + "MetricGroup": "Memory_BW", + "MetricName": "PMM_Write_BW" + }, + { + "MetricExpr": "cha_0@event\\=0x0@", + "BriefDescription": "Socket actual clocks when any core is active on that socket", + "MetricGroup": "", + "MetricName": "Socket_CLKS" + }, + { "MetricExpr": "(cstate_core@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per core", "MetricName": "C3_Core_Residency" }, { - "BriefDescription": "C6 residency percent per core", "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per core", "MetricName": "C6_Core_Residency" }, { - "BriefDescription": "C7 residency percent per core", "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per core", "MetricName": "C7_Core_Residency" }, { - "BriefDescription": "C2 residency percent per package", "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C2 residency percent per package", "MetricName": "C2_Pkg_Residency" }, { - "BriefDescription": "C3 residency percent per package", "MetricExpr": "(cstate_pkg@c3\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C3 residency percent per package", "MetricName": "C3_Pkg_Residency" }, { - "BriefDescription": "C6 residency percent per package", "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C6 residency percent per package", "MetricName": "C6_Pkg_Residency" }, { - "BriefDescription": "C7 residency percent per package", "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100", "MetricGroup": "Power", + "BriefDescription": "C7 residency percent per package", "MetricName": "C7_Pkg_Residency" } ] diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c index 68c92bb599ee..58f77fd0f59f 100644 --- a/tools/perf/pmu-events/jevents.c +++ b/tools/perf/pmu-events/jevents.c @@ -235,6 +235,7 @@ static struct map { { "iMPH-U", "uncore_arb" }, { "CPU-M-CF", "cpum_cf" }, { "CPU-M-SF", "cpum_sf" }, + { "UPI LL", "uncore_upi" }, {} }; @@ -414,7 +415,6 @@ static int save_arch_std_events(void *data, char *name, char *event, char *metric_name, char *metric_group) { struct event_struct *es; - struct stat *sb = data; es = malloc(sizeof(*es)); if (!es) diff --git a/tools/perf/scripts/python/export-to-sqlite.py b/tools/perf/scripts/python/export-to-sqlite.py index 3b71902a5a21..bf271fbc3a88 100644 --- a/tools/perf/scripts/python/export-to-sqlite.py +++ b/tools/perf/scripts/python/export-to-sqlite.py @@ -331,7 +331,7 @@ if perf_db_export_calls: 'return_id,' 'CASE WHEN flags=0 THEN \'\' WHEN flags=1 THEN \'no call\' WHEN flags=2 THEN \'no return\' WHEN flags=3 THEN \'no call/return\' WHEN flags=6 THEN \'jump\' ELSE flags END AS flags,' 'parent_call_path_id,' - 'parent_id' + 'calls.parent_id' ' FROM calls INNER JOIN call_paths ON call_paths.id = call_path_id') do_query(query, 'CREATE VIEW samples_view AS ' diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index 74ef92f1d19a..affed7d149be 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -456,6 +456,10 @@ class CallGraphLevelItemBase(object): self.query_done = False; self.child_count = 0 self.child_items = [] + if parent_item: + self.level = parent_item.level + 1 + else: + self.level = 0 def getChildItem(self, row): return self.child_items[row] @@ -877,9 +881,14 @@ class TreeWindowBase(QMdiSubWindow): super(TreeWindowBase, self).__init__(parent) self.model = None - self.view = None self.find_bar = None + self.view = QTreeView() + self.view.setSelectionMode(QAbstractItemView.ContiguousSelection) + self.view.CopyCellsToClipboard = CopyTreeCellsToClipboard + + self.context_menu = TreeContextMenu(self.view) + def DisplayFound(self, ids): if not len(ids): return False @@ -921,7 +930,6 @@ class CallGraphWindow(TreeWindowBase): self.model = LookupCreateModel("Context-Sensitive Call Graph", lambda x=glb: CallGraphModel(x)) - self.view = QTreeView() self.view.setModel(self.model) for c, w in ((0, 250), (1, 100), (2, 60), (3, 70), (4, 70), (5, 100)): @@ -944,7 +952,6 @@ class CallTreeWindow(TreeWindowBase): self.model = LookupCreateModel("Call Tree", lambda x=glb: CallTreeModel(x)) - self.view = QTreeView() self.view.setModel(self.model) for c, w in ((0, 230), (1, 100), (2, 100), (3, 70), (4, 70), (5, 100)): @@ -1649,10 +1656,14 @@ class BranchWindow(QMdiSubWindow): self.view = QTreeView() self.view.setUniformRowHeights(True) + self.view.setSelectionMode(QAbstractItemView.ContiguousSelection) + self.view.CopyCellsToClipboard = CopyTreeCellsToClipboard self.view.setModel(self.model) self.ResizeColumnsToContents() + self.context_menu = TreeContextMenu(self.view) + self.find_bar = FindBar(self, self, True) self.finder = ChildDataItemFinder(self.model.root) @@ -2261,6 +2272,240 @@ class ResizeColumnsToContentsBase(QObject): self.data_model.rowsInserted.disconnect(self.UpdateColumnWidths) self.ResizeColumnsToContents() +# Convert value to CSV + +def ToCSValue(val): + if '"' in val: + val = val.replace('"', '""') + if "," in val or '"' in val: + val = '"' + val + '"' + return val + +# Key to sort table model indexes by row / column, assuming fewer than 1000 columns + +glb_max_cols = 1000 + +def RowColumnKey(a): + return a.row() * glb_max_cols + a.column() + +# Copy selected table cells to clipboard + +def CopyTableCellsToClipboard(view, as_csv=False, with_hdr=False): + indexes = sorted(view.selectedIndexes(), key=RowColumnKey) + idx_cnt = len(indexes) + if not idx_cnt: + return + if idx_cnt == 1: + with_hdr=False + min_row = indexes[0].row() + max_row = indexes[0].row() + min_col = indexes[0].column() + max_col = indexes[0].column() + for i in indexes: + min_row = min(min_row, i.row()) + max_row = max(max_row, i.row()) + min_col = min(min_col, i.column()) + max_col = max(max_col, i.column()) + if max_col > glb_max_cols: + raise RuntimeError("glb_max_cols is too low") + max_width = [0] * (1 + max_col - min_col) + for i in indexes: + c = i.column() - min_col + max_width[c] = max(max_width[c], len(str(i.data()))) + text = "" + pad = "" + sep = "" + if with_hdr: + model = indexes[0].model() + for col in range(min_col, max_col + 1): + val = model.headerData(col, Qt.Horizontal) + if as_csv: + text += sep + ToCSValue(val) + sep = "," + else: + c = col - min_col + max_width[c] = max(max_width[c], len(val)) + width = max_width[c] + align = model.headerData(col, Qt.Horizontal, Qt.TextAlignmentRole) + if align & Qt.AlignRight: + val = val.rjust(width) + text += pad + sep + val + pad = " " * (width - len(val)) + sep = " " + text += "\n" + pad = "" + sep = "" + last_row = min_row + for i in indexes: + if i.row() > last_row: + last_row = i.row() + text += "\n" + pad = "" + sep = "" + if as_csv: + text += sep + ToCSValue(str(i.data())) + sep = "," + else: + width = max_width[i.column() - min_col] + if i.data(Qt.TextAlignmentRole) & Qt.AlignRight: + val = str(i.data()).rjust(width) + else: + val = str(i.data()) + text += pad + sep + val + pad = " " * (width - len(val)) + sep = " " + QApplication.clipboard().setText(text) + +def CopyTreeCellsToClipboard(view, as_csv=False, with_hdr=False): + indexes = view.selectedIndexes() + if not len(indexes): + return + + selection = view.selectionModel() + + first = None + for i in indexes: + above = view.indexAbove(i) + if not selection.isSelected(above): + first = i + break + + if first is None: + raise RuntimeError("CopyTreeCellsToClipboard internal error") + + model = first.model() + row_cnt = 0 + col_cnt = model.columnCount(first) + max_width = [0] * col_cnt + + indent_sz = 2 + indent_str = " " * indent_sz + + expanded_mark_sz = 2 + if sys.version_info[0] == 3: + expanded_mark = "\u25BC " + not_expanded_mark = "\u25B6 " + else: + expanded_mark = unicode(chr(0xE2) + chr(0x96) + chr(0xBC) + " ", "utf-8") + not_expanded_mark = unicode(chr(0xE2) + chr(0x96) + chr(0xB6) + " ", "utf-8") + leaf_mark = " " + + if not as_csv: + pos = first + while True: + row_cnt += 1 + row = pos.row() + for c in range(col_cnt): + i = pos.sibling(row, c) + if c: + n = len(str(i.data())) + else: + n = len(str(i.data()).strip()) + n += (i.internalPointer().level - 1) * indent_sz + n += expanded_mark_sz + max_width[c] = max(max_width[c], n) + pos = view.indexBelow(pos) + if not selection.isSelected(pos): + break + + text = "" + pad = "" + sep = "" + if with_hdr: + for c in range(col_cnt): + val = model.headerData(c, Qt.Horizontal, Qt.DisplayRole).strip() + if as_csv: + text += sep + ToCSValue(val) + sep = "," + else: + max_width[c] = max(max_width[c], len(val)) + width = max_width[c] + align = model.headerData(c, Qt.Horizontal, Qt.TextAlignmentRole) + if align & Qt.AlignRight: + val = val.rjust(width) + text += pad + sep + val + pad = " " * (width - len(val)) + sep = " " + text += "\n" + pad = "" + sep = "" + + pos = first + while True: + row = pos.row() + for c in range(col_cnt): + i = pos.sibling(row, c) + val = str(i.data()) + if not c: + if model.hasChildren(i): + if view.isExpanded(i): + mark = expanded_mark + else: + mark = not_expanded_mark + else: + mark = leaf_mark + val = indent_str * (i.internalPointer().level - 1) + mark + val.strip() + if as_csv: + text += sep + ToCSValue(val) + sep = "," + else: + width = max_width[c] + if c and i.data(Qt.TextAlignmentRole) & Qt.AlignRight: + val = val.rjust(width) + text += pad + sep + val + pad = " " * (width - len(val)) + sep = " " + pos = view.indexBelow(pos) + if not selection.isSelected(pos): + break + text = text.rstrip() + "\n" + pad = "" + sep = "" + + QApplication.clipboard().setText(text) + +def CopyCellsToClipboard(view, as_csv=False, with_hdr=False): + view.CopyCellsToClipboard(view, as_csv, with_hdr) + +def CopyCellsToClipboardHdr(view): + CopyCellsToClipboard(view, False, True) + +def CopyCellsToClipboardCSV(view): + CopyCellsToClipboard(view, True, True) + +# Context menu + +class ContextMenu(object): + + def __init__(self, view): + self.view = view + self.view.setContextMenuPolicy(Qt.CustomContextMenu) + self.view.customContextMenuRequested.connect(self.ShowContextMenu) + + def ShowContextMenu(self, pos): + menu = QMenu(self.view) + self.AddActions(menu) + menu.exec_(self.view.mapToGlobal(pos)) + + def AddCopy(self, menu): + menu.addAction(CreateAction("&Copy selection", "Copy to clipboard", lambda: CopyCellsToClipboardHdr(self.view), self.view)) + menu.addAction(CreateAction("Copy selection as CS&V", "Copy to clipboard as CSV", lambda: CopyCellsToClipboardCSV(self.view), self.view)) + + def AddActions(self, menu): + self.AddCopy(menu) + +class TreeContextMenu(ContextMenu): + + def __init__(self, view): + super(TreeContextMenu, self).__init__(view) + + def AddActions(self, menu): + i = self.view.currentIndex() + text = str(i.data()).strip() + if len(text): + menu.addAction(CreateAction('Copy "' + text + '"', "Copy to clipboard", lambda: QApplication.clipboard().setText(text), self.view)) + self.AddCopy(menu) + # Table window class TableWindow(QMdiSubWindow, ResizeColumnsToContentsBase): @@ -2279,9 +2524,13 @@ class TableWindow(QMdiSubWindow, ResizeColumnsToContentsBase): self.view.verticalHeader().setVisible(False) self.view.sortByColumn(-1, Qt.AscendingOrder) self.view.setSortingEnabled(True) + self.view.setSelectionMode(QAbstractItemView.ContiguousSelection) + self.view.CopyCellsToClipboard = CopyTableCellsToClipboard self.ResizeColumnsToContents() + self.context_menu = ContextMenu(self.view) + self.find_bar = FindBar(self, self, True) self.finder = ChildDataItemFinder(self.data_model) @@ -2395,6 +2644,10 @@ class TopCallsWindow(QMdiSubWindow, ResizeColumnsToContentsBase): self.view.setModel(self.model) self.view.setEditTriggers(QAbstractItemView.NoEditTriggers) self.view.verticalHeader().setVisible(False) + self.view.setSelectionMode(QAbstractItemView.ContiguousSelection) + self.view.CopyCellsToClipboard = CopyTableCellsToClipboard + + self.context_menu = ContextMenu(self.view) self.ResizeColumnsToContents() @@ -2660,6 +2913,60 @@ class HelpOnlyWindow(QMainWindow): self.setCentralWidget(self.text) +# PostqreSQL server version + +def PostqreSQLServerVersion(db): + query = QSqlQuery(db) + QueryExec(query, "SELECT VERSION()") + if query.next(): + v_str = query.value(0) + v_list = v_str.strip().split(" ") + if v_list[0] == "PostgreSQL" and v_list[2] == "on": + return v_list[1] + return v_str + return "Unknown" + +# SQLite version + +def SQLiteVersion(db): + query = QSqlQuery(db) + QueryExec(query, "SELECT sqlite_version()") + if query.next(): + return query.value(0) + return "Unknown" + +# About dialog + +class AboutDialog(QDialog): + + def __init__(self, glb, parent=None): + super(AboutDialog, self).__init__(parent) + + self.setWindowTitle("About Exported SQL Viewer") + self.setMinimumWidth(300) + + pyside_version = "1" if pyside_version_1 else "2" + + text = "<pre>" + text += "Python version: " + sys.version.split(" ")[0] + "\n" + text += "PySide version: " + pyside_version + "\n" + text += "Qt version: " + qVersion() + "\n" + if glb.dbref.is_sqlite3: + text += "SQLite version: " + SQLiteVersion(glb.db) + "\n" + else: + text += "PostqreSQL version: " + PostqreSQLServerVersion(glb.db) + "\n" + text += "</pre>" + + self.text = QTextBrowser() + self.text.setHtml(text) + self.text.setReadOnly(True) + self.text.setOpenExternalLinks(True) + + self.vbox = QVBoxLayout() + self.vbox.addWidget(self.text) + + self.setLayout(self.vbox); + # Font resize def ResizeFont(widget, diff): @@ -2732,6 +3039,8 @@ class MainWindow(QMainWindow): file_menu.addAction(CreateExitAction(glb.app, self)) edit_menu = menu.addMenu("&Edit") + edit_menu.addAction(CreateAction("&Copy", "Copy to clipboard", self.CopyToClipboard, self, QKeySequence.Copy)) + edit_menu.addAction(CreateAction("Copy as CS&V", "Copy to clipboard as CSV", self.CopyToClipboardCSV, self)) edit_menu.addAction(CreateAction("&Find...", "Find items", self.Find, self, QKeySequence.Find)) edit_menu.addAction(CreateAction("Fetch &more records...", "Fetch more records", self.FetchMoreRecords, self, [QKeySequence(Qt.Key_F8)])) edit_menu.addAction(CreateAction("&Shrink Font", "Make text smaller", self.ShrinkFont, self, [QKeySequence("Ctrl+-")])) @@ -2755,6 +3064,21 @@ class MainWindow(QMainWindow): help_menu = menu.addMenu("&Help") help_menu.addAction(CreateAction("&Exported SQL Viewer Help", "Helpful information", self.Help, self, QKeySequence.HelpContents)) + help_menu.addAction(CreateAction("&About Exported SQL Viewer", "About this application", self.About, self)) + + def Try(self, fn): + win = self.mdi_area.activeSubWindow() + if win: + try: + fn(win.view) + except: + pass + + def CopyToClipboard(self): + self.Try(CopyCellsToClipboardHdr) + + def CopyToClipboardCSV(self): + self.Try(CopyCellsToClipboardCSV) def Find(self): win = self.mdi_area.activeSubWindow() @@ -2773,12 +3097,10 @@ class MainWindow(QMainWindow): pass def ShrinkFont(self): - win = self.mdi_area.activeSubWindow() - ShrinkFont(win.view) + self.Try(ShrinkFont) def EnlargeFont(self): - win = self.mdi_area.activeSubWindow() - EnlargeFont(win.view) + self.Try(EnlargeFont) def EventMenu(self, events, reports_menu): branches_events = 0 @@ -2828,6 +3150,10 @@ class MainWindow(QMainWindow): def Help(self): HelpWindow(self.glb, self) + def About(self): + dialog = AboutDialog(self.glb, self) + dialog.exec_() + # XED Disassembler class xed_state_t(Structure): diff --git a/tools/perf/tests/dso-data.c b/tools/perf/tests/dso-data.c index 7f6c52021e41..946ab4b63acd 100644 --- a/tools/perf/tests/dso-data.c +++ b/tools/perf/tests/dso-data.c @@ -304,7 +304,7 @@ int test__dso_data_cache(struct test *test __maybe_unused, int subtest __maybe_u /* Make sure we did not leak any file descriptor. */ nr_end = open_files_cnt(); pr_debug("nr start %ld, nr stop %ld\n", nr, nr_end); - TEST_ASSERT_VAL("failed leadking files", nr == nr_end); + TEST_ASSERT_VAL("failed leaking files", nr == nr_end); return 0; } @@ -380,6 +380,6 @@ int test__dso_data_reopen(struct test *test __maybe_unused, int subtest __maybe_ /* Make sure we did not leak any file descriptor. */ nr_end = open_files_cnt(); pr_debug("nr start %ld, nr stop %ld\n", nr, nr_end); - TEST_ASSERT_VAL("failed leadking files", nr == nr_end); + TEST_ASSERT_VAL("failed leaking files", nr == nr_end); return 0; } diff --git a/tools/perf/tests/make b/tools/perf/tests/make index e46723568516..5363a12a8b9b 100644 --- a/tools/perf/tests/make +++ b/tools/perf/tests/make @@ -107,7 +107,7 @@ make_minimal := NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 make_minimal += NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 make_minimal += NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 make_minimal += NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 -make_minimal += NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 +make_minimal += NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 # $(run) contains all available tests run := make_pure diff --git a/tools/perf/tests/shell/record+zstd_comp_decomp.sh b/tools/perf/tests/shell/record+zstd_comp_decomp.sh new file mode 100755 index 000000000000..5dcba800109f --- /dev/null +++ b/tools/perf/tests/shell/record+zstd_comp_decomp.sh @@ -0,0 +1,34 @@ +#!/bin/sh +# Zstd perf.data compression/decompression + +trace_file=$(mktemp /tmp/perf.data.XXX) +perf_tool=perf + +skip_if_no_z_record() { + $perf_tool record -h 2>&1 | grep -q '\-z, \-\-compression\-level' +} + +collect_z_record() { + echo "Collecting compressed record file:" + $perf_tool record -o $trace_file -g -z -F 5000 -- \ + dd count=500 if=/dev/random of=/dev/null +} + +check_compressed_stats() { + echo "Checking compressed events stats:" + $perf_tool report -i $trace_file --header --stats | \ + grep -E "(# compressed : Zstd,)|(COMPRESSED events:)" +} + +check_compressed_output() { + $perf_tool inject -i $trace_file -o $trace_file.decomp && + $perf_tool report -i $trace_file --stdio | head -n -3 > $trace_file.comp.output && + $perf_tool report -i $trace_file.decomp --stdio | head -n -3 > $trace_file.decomp.output && + diff $trace_file.comp.output $trace_file.decomp.output +} + +skip_if_no_z_record || exit 2 +collect_z_record && check_compressed_stats && check_compressed_output +err=$? +rm -f $trace_file* +exit $err diff --git a/tools/perf/trace/beauty/renameat.c b/tools/perf/trace/beauty/renameat.c index 6dab340cc506..852d2e271833 100644 --- a/tools/perf/trace/beauty/renameat.c +++ b/tools/perf/trace/beauty/renameat.c @@ -2,7 +2,6 @@ // Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com> #include "trace/beauty/beauty.h" -#include <uapi/linux/fs.h> static size_t renameat2__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix) { diff --git a/tools/perf/trace/strace/groups/string b/tools/perf/trace/strace/groups/string new file mode 100644 index 000000000000..c87129a3e3c4 --- /dev/null +++ b/tools/perf/trace/strace/groups/string @@ -0,0 +1,65 @@ +access +acct +add_key +chdir +chmod +chown +chroot +creat +delete_module +execve +execveat +faccessat +fchmodat +fchownat +fgetxattr +finit_module +fremovexattr +fsetxattr +futimesat +getxattr +inotify_add_watch +lchown +lgetxattr +link +linkat +listxattr +llistxattr +lremovexattr +lsetxattr +lstat +memfd_create +mkdir +mkdirat +mknod +mknodat +mq_open +mq_timedsend +mq_unlink +name_to_handle_at +newfstatat +open +openat +pivot_root +pwrite64 +quotactl +readlink +readlinkat +removexattr +rename +renameat +renameat2 +request_key +rmdir +setxattr +stat +statfs +statx +swapoff +swapon +symlink +symlinkat +truncate +unlink +unlinkat +utimensat diff --git a/tools/perf/util/Build b/tools/perf/util/Build index 8dd3102301ea..6d5bbc8b589b 100644 --- a/tools/perf/util/Build +++ b/tools/perf/util/Build @@ -145,6 +145,8 @@ perf-y += scripting-engines/ perf-$(CONFIG_ZLIB) += zlib.o perf-$(CONFIG_LZMA) += lzma.o +perf-$(CONFIG_ZSTD) += zstd.o + perf-y += demangle-java.o perf-y += demangle-rust.o diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c index c8b01176c9e1..0b8573fd9b05 100644 --- a/tools/perf/util/annotate.c +++ b/tools/perf/util/annotate.c @@ -1021,7 +1021,7 @@ static void annotation__count_and_fill(struct annotation *notes, u64 start, u64 float ipc = n_insn / ((double)ch->cycles / (double)ch->num); /* Hide data when there are too many overlaps. */ - if (ch->reset >= 0x7fff || ch->reset >= ch->num / 2) + if (ch->reset >= 0x7fff) return; for (offset = start; offset <= end; offset++) { @@ -1714,8 +1714,8 @@ static int symbol__disassemble_bpf(struct symbol *sym, if (dso->binary_type != DSO_BINARY_TYPE__BPF_PROG_INFO) return -1; - pr_debug("%s: handling sym %s addr %lx len %lx\n", __func__, - sym->name, sym->start, sym->end - sym->start); + pr_debug("%s: handling sym %s addr %" PRIx64 " len %" PRIx64 "\n", __func__, + sym->name, sym->start, sym->end - sym->start); memset(tpath, 0, sizeof(tpath)); perf_exe(tpath, sizeof(tpath)); @@ -1740,7 +1740,7 @@ static int symbol__disassemble_bpf(struct symbol *sym, info_linear = info_node->info_linear; sub_id = dso->bpf_prog.sub_id; - info.buffer = (void *)(info_linear->info.jited_prog_insns); + info.buffer = (void *)(uintptr_t)(info_linear->info.jited_prog_insns); info.buffer_length = info_linear->info.jited_prog_len; if (info_linear->info.nr_line_info) @@ -1776,7 +1776,7 @@ static int symbol__disassemble_bpf(struct symbol *sym, const char *srcline; u64 addr; - addr = pc + ((u64 *)(info_linear->info.jited_ksyms))[sub_id]; + addr = pc + ((u64 *)(uintptr_t)(info_linear->info.jited_ksyms))[sub_id]; count = disassemble(pc, &info); if (prog_linfo) diff --git a/tools/perf/util/cloexec.c b/tools/perf/util/cloexec.c index ca0fff6272be..06f48312c5ed 100644 --- a/tools/perf/util/cloexec.c +++ b/tools/perf/util/cloexec.c @@ -7,7 +7,6 @@ #include "asm/bug.h" #include "debug.h" #include <unistd.h> -#include <asm/unistd.h> #include <sys/syscall.h> static unsigned long flag = PERF_FLAG_FD_CLOEXEC; diff --git a/tools/perf/util/compress.h b/tools/perf/util/compress.h index 892e92e7e7fc..0cd3369af2a4 100644 --- a/tools/perf/util/compress.h +++ b/tools/perf/util/compress.h @@ -2,6 +2,11 @@ #ifndef PERF_COMPRESS_H #define PERF_COMPRESS_H +#include <stdbool.h> +#ifdef HAVE_ZSTD_SUPPORT +#include <zstd.h> +#endif + #ifdef HAVE_ZLIB_SUPPORT int gzip_decompress_to_file(const char *input, int output_fd); bool gzip_is_compressed(const char *input); @@ -12,4 +17,52 @@ int lzma_decompress_to_file(const char *input, int output_fd); bool lzma_is_compressed(const char *input); #endif +struct zstd_data { +#ifdef HAVE_ZSTD_SUPPORT + ZSTD_CStream *cstream; + ZSTD_DStream *dstream; +#endif +}; + +#ifdef HAVE_ZSTD_SUPPORT + +int zstd_init(struct zstd_data *data, int level); +int zstd_fini(struct zstd_data *data); + +size_t zstd_compress_stream_to_records(struct zstd_data *data, void *dst, size_t dst_size, + void *src, size_t src_size, size_t max_record_size, + size_t process_header(void *record, size_t increment)); + +size_t zstd_decompress_stream(struct zstd_data *data, void *src, size_t src_size, + void *dst, size_t dst_size); +#else /* !HAVE_ZSTD_SUPPORT */ + +static inline int zstd_init(struct zstd_data *data __maybe_unused, int level __maybe_unused) +{ + return 0; +} + +static inline int zstd_fini(struct zstd_data *data __maybe_unused) +{ + return 0; +} + +static inline +size_t zstd_compress_stream_to_records(struct zstd_data *data __maybe_unused, + void *dst __maybe_unused, size_t dst_size __maybe_unused, + void *src __maybe_unused, size_t src_size __maybe_unused, + size_t max_record_size __maybe_unused, + size_t process_header(void *record, size_t increment) __maybe_unused) +{ + return 0; +} + +static inline size_t zstd_decompress_stream(struct zstd_data *data __maybe_unused, void *src __maybe_unused, + size_t src_size __maybe_unused, void *dst __maybe_unused, + size_t dst_size __maybe_unused) +{ + return 0; +} +#endif + #endif /* PERF_COMPRESS_H */ diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 110804936fc3..de488b43f440 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -422,11 +422,9 @@ static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm) if (!etmq->packet) goto out_free; - if (etm->synth_opts.last_branch || etm->sample_branches) { - etmq->prev_packet = zalloc(szp); - if (!etmq->prev_packet) - goto out_free; - } + etmq->prev_packet = zalloc(szp); + if (!etmq->prev_packet) + goto out_free; if (etm->synth_opts.last_branch) { size_t sz = sizeof(struct branch_stack); @@ -981,7 +979,6 @@ static int cs_etm__sample(struct cs_etm_queue *etmq) * PREV_PACKET is a branch. */ if (etm->synth_opts.last_branch && - etmq->prev_packet && etmq->prev_packet->sample_type == CS_ETM_RANGE && etmq->prev_packet->last_instr_taken_branch) cs_etm__update_last_branch_rb(etmq); @@ -1014,7 +1011,7 @@ static int cs_etm__sample(struct cs_etm_queue *etmq) etmq->period_instructions = instrs_over; } - if (etm->sample_branches && etmq->prev_packet) { + if (etm->sample_branches) { bool generate_sample = false; /* Generate sample for tracing on packet */ @@ -1071,9 +1068,6 @@ static int cs_etm__flush(struct cs_etm_queue *etmq) struct cs_etm_auxtrace *etm = etmq->etm; struct cs_etm_packet *tmp; - if (!etmq->prev_packet) - return 0; - /* Handle start tracing packet */ if (etmq->prev_packet->sample_type == CS_ETM_EMPTY) goto swap_packet; diff --git a/tools/perf/util/data-convert-bt.c b/tools/perf/util/data-convert-bt.c index 26af43ad9ddd..e0311c9750ad 100644 --- a/tools/perf/util/data-convert-bt.c +++ b/tools/perf/util/data-convert-bt.c @@ -310,7 +310,7 @@ static int add_tracepoint_field_value(struct ctf_writer *cw, if (flags & TEP_FIELD_IS_DYNAMIC) { unsigned long long tmp_val; - tmp_val = tep_read_number(fmtf->event->pevent, + tmp_val = tep_read_number(fmtf->event->tep, data + offset, len); offset = tmp_val; len = offset >> 16; @@ -354,7 +354,7 @@ static int add_tracepoint_field_value(struct ctf_writer *cw, unsigned long long value_int; value_int = tep_read_number( - fmtf->event->pevent, + fmtf->event->tep, data + offset + i * len, len); if (!(flags & TEP_FIELD_IS_SIGNED)) diff --git a/tools/perf/util/env.c b/tools/perf/util/env.c index c6351b557bb0..6a3eaf7d9353 100644 --- a/tools/perf/util/env.c +++ b/tools/perf/util/env.c @@ -57,9 +57,11 @@ struct bpf_prog_info_node *perf_env__find_bpf_prog_info(struct perf_env *env, else if (prog_id > node->info_linear->info.id) n = n->rb_right; else - break; + goto out; } + node = NULL; +out: up_read(&env->bpf_progs.lock); return node; } @@ -109,9 +111,11 @@ struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id) else if (btf_id > node->id) n = n->rb_right; else - break; + goto out; } + node = NULL; +out: up_read(&env->bpf_progs.lock); return node; } diff --git a/tools/perf/util/env.h b/tools/perf/util/env.h index 4f8e2b485c01..271a90b326c4 100644 --- a/tools/perf/util/env.h +++ b/tools/perf/util/env.h @@ -62,6 +62,11 @@ struct perf_env { struct cpu_topology_map *cpu; struct cpu_cache_level *caches; int caches_cnt; + u32 comp_ratio; + u32 comp_ver; + u32 comp_type; + u32 comp_level; + u32 comp_mmap_len; struct numa_node *numa_nodes; struct memory_node *memory_nodes; unsigned long long memory_bsize; @@ -80,6 +85,12 @@ struct perf_env { } bpf_progs; }; +enum perf_compress_type { + PERF_COMP_NONE = 0, + PERF_COMP_ZSTD, + PERF_COMP_MAX +}; + struct bpf_prog_info_node; struct btf_node; diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index ba7be74fad6e..d1ad6c419724 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -68,6 +68,7 @@ static const char *perf_event__names[] = { [PERF_RECORD_EVENT_UPDATE] = "EVENT_UPDATE", [PERF_RECORD_TIME_CONV] = "TIME_CONV", [PERF_RECORD_HEADER_FEATURE] = "FEATURE", + [PERF_RECORD_COMPRESSED] = "COMPRESSED", }; static const char *perf_ns__names[] = { diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h index 36ae7e92dab1..9e999550f247 100644 --- a/tools/perf/util/event.h +++ b/tools/perf/util/event.h @@ -6,6 +6,7 @@ #include <stdio.h> #include <linux/kernel.h> #include <linux/bpf.h> +#include <linux/perf_event.h> #include "../perf.h" #include "build-id.h" @@ -254,6 +255,7 @@ enum perf_user_event_type { /* above any possible kernel type */ PERF_RECORD_EVENT_UPDATE = 78, PERF_RECORD_TIME_CONV = 79, PERF_RECORD_HEADER_FEATURE = 80, + PERF_RECORD_COMPRESSED = 81, PERF_RECORD_HEADER_MAX }; @@ -626,6 +628,11 @@ struct feature_event { char data[]; }; +struct compressed_event { + struct perf_event_header header; + char data[]; +}; + union perf_event { struct perf_event_header header; struct mmap_event mmap; @@ -659,6 +666,7 @@ union perf_event { struct feature_event feat; struct ksymbol_event ksymbol_event; struct bpf_event bpf_event; + struct compressed_event pack; }; void perf_event__print_totals(void); diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 6689378ee577..69d0fa8ab16f 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -1009,7 +1009,8 @@ int perf_evlist__parse_mmap_pages(const struct option *opt, const char *str, */ int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages, unsigned int auxtrace_pages, - bool auxtrace_overwrite, int nr_cblocks, int affinity) + bool auxtrace_overwrite, int nr_cblocks, int affinity, int flush, + int comp_level) { struct perf_evsel *evsel; const struct cpu_map *cpus = evlist->cpus; @@ -1019,7 +1020,8 @@ int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages, * Its value is decided by evsel's write_backward. * So &mp should not be passed through const pointer. */ - struct mmap_params mp = { .nr_cblocks = nr_cblocks, .affinity = affinity }; + struct mmap_params mp = { .nr_cblocks = nr_cblocks, .affinity = affinity, .flush = flush, + .comp_level = comp_level }; if (!evlist->mmap) evlist->mmap = perf_evlist__alloc_mmap(evlist, false); @@ -1051,7 +1053,7 @@ int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages, int perf_evlist__mmap(struct perf_evlist *evlist, unsigned int pages) { - return perf_evlist__mmap_ex(evlist, pages, 0, false, 0, PERF_AFFINITY_SYS); + return perf_evlist__mmap_ex(evlist, pages, 0, false, 0, PERF_AFFINITY_SYS, 1, 0); } int perf_evlist__create_maps(struct perf_evlist *evlist, struct target *target) @@ -1868,12 +1870,12 @@ static void *perf_evlist__poll_thread(void *arg) { struct perf_evlist *evlist = arg; bool draining = false; - int i; + int i, done = 0; + + while (!done) { + bool got_data = false; - while (draining || !(evlist->thread.done)) { - if (draining) - draining = false; - else if (evlist->thread.done) + if (evlist->thread.done) draining = true; if (!draining) @@ -1894,9 +1896,13 @@ static void *perf_evlist__poll_thread(void *arg) pr_warning("cannot locate proper evsel for the side band event\n"); perf_mmap__consume(map); + got_data = true; } perf_mmap__read_done(map); } + + if (draining && !got_data) + break; } return NULL; } diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index 6a94785b9100..49354fe24d5f 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -177,7 +177,8 @@ unsigned long perf_event_mlock_kb_in_pages(void); int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages, unsigned int auxtrace_pages, - bool auxtrace_overwrite, int nr_cblocks, int affinity); + bool auxtrace_overwrite, int nr_cblocks, + int affinity, int flush, int comp_level); int perf_evlist__mmap(struct perf_evlist *evlist, unsigned int pages); void perf_evlist__munmap(struct perf_evlist *evlist); diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 66d066f18b5b..a6f572a40deb 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -580,6 +580,12 @@ static int perf_evsel__raw_name(struct perf_evsel *evsel, char *bf, size_t size) return ret + perf_evsel__add_modifiers(evsel, bf + ret, size - ret); } +static int perf_evsel__tool_name(char *bf, size_t size) +{ + int ret = scnprintf(bf, size, "duration_time"); + return ret; +} + const char *perf_evsel__name(struct perf_evsel *evsel) { char bf[128]; @@ -601,7 +607,10 @@ const char *perf_evsel__name(struct perf_evsel *evsel) break; case PERF_TYPE_SOFTWARE: - perf_evsel__sw_name(evsel, bf, sizeof(bf)); + if (evsel->tool_event) + perf_evsel__tool_name(bf, sizeof(bf)); + else + perf_evsel__sw_name(evsel, bf, sizeof(bf)); break; case PERF_TYPE_TRACEPOINT: @@ -804,6 +813,8 @@ static void apply_config_terms(struct perf_evsel *evsel, break; case PERF_EVSEL__CONFIG_TERM_DRV_CFG: break; + case PERF_EVSEL__CONFIG_TERM_PERCORE: + break; default: break; } @@ -2368,7 +2379,7 @@ int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, if (data->user_regs.abi) { u64 mask = evsel->attr.sample_regs_user; - sz = hweight_long(mask) * sizeof(u64); + sz = hweight64(mask) * sizeof(u64); OVERFLOW_CHECK(array, sz, max_size); data->user_regs.mask = mask; data->user_regs.regs = (u64 *)array; @@ -2424,7 +2435,7 @@ int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, if (data->intr_regs.abi != PERF_SAMPLE_REGS_ABI_NONE) { u64 mask = evsel->attr.sample_regs_intr; - sz = hweight_long(mask) * sizeof(u64); + sz = hweight64(mask) * sizeof(u64); OVERFLOW_CHECK(array, sz, max_size); data->intr_regs.mask = mask; data->intr_regs.regs = (u64 *)array; @@ -2552,7 +2563,7 @@ size_t perf_event__sample_event_size(const struct perf_sample *sample, u64 type, if (type & PERF_SAMPLE_REGS_USER) { if (sample->user_regs.abi) { result += sizeof(u64); - sz = hweight_long(sample->user_regs.mask) * sizeof(u64); + sz = hweight64(sample->user_regs.mask) * sizeof(u64); result += sz; } else { result += sizeof(u64); @@ -2580,7 +2591,7 @@ size_t perf_event__sample_event_size(const struct perf_sample *sample, u64 type, if (type & PERF_SAMPLE_REGS_INTR) { if (sample->intr_regs.abi) { result += sizeof(u64); - sz = hweight_long(sample->intr_regs.mask) * sizeof(u64); + sz = hweight64(sample->intr_regs.mask) * sizeof(u64); result += sz; } else { result += sizeof(u64); @@ -2710,7 +2721,7 @@ int perf_event__synthesize_sample(union perf_event *event, u64 type, if (type & PERF_SAMPLE_REGS_USER) { if (sample->user_regs.abi) { *array++ = sample->user_regs.abi; - sz = hweight_long(sample->user_regs.mask) * sizeof(u64); + sz = hweight64(sample->user_regs.mask) * sizeof(u64); memcpy(array, sample->user_regs.regs, sz); array = (void *)array + sz; } else { @@ -2746,7 +2757,7 @@ int perf_event__synthesize_sample(union perf_event *event, u64 type, if (type & PERF_SAMPLE_REGS_INTR) { if (sample->intr_regs.abi) { *array++ = sample->intr_regs.abi; - sz = hweight_long(sample->intr_regs.mask) * sizeof(u64); + sz = hweight64(sample->intr_regs.mask) * sizeof(u64); memcpy(array, sample->intr_regs.regs, sz); array = (void *)array + sz; } else { diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 0f2c6c93d721..cad54e8ba522 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -50,6 +50,7 @@ enum term_type { PERF_EVSEL__CONFIG_TERM_OVERWRITE, PERF_EVSEL__CONFIG_TERM_DRV_CFG, PERF_EVSEL__CONFIG_TERM_BRANCH, + PERF_EVSEL__CONFIG_TERM_PERCORE, }; struct perf_evsel_config_term { @@ -67,6 +68,7 @@ struct perf_evsel_config_term { bool overwrite; char *branch; unsigned long max_events; + bool percore; } val; bool weak; }; @@ -75,6 +77,11 @@ struct perf_stat_evsel; typedef int (perf_evsel__sb_cb_t)(union perf_event *event, void *data); +enum perf_tool_event { + PERF_TOOL_NONE = 0, + PERF_TOOL_DURATION_TIME = 1, +}; + /** struct perf_evsel - event selector * * @evlist - evlist this evsel is in, if it is in one. @@ -121,6 +128,7 @@ struct perf_evsel { unsigned int sample_size; int id_pos; int is_pos; + enum perf_tool_event tool_event; bool uniquified_name; bool snapshot; bool supported; @@ -152,6 +160,7 @@ struct perf_evsel { struct perf_evsel **metric_events; bool collect_stat; bool weak_group; + bool percore; const char *pmu_name; struct { perf_evsel__sb_cb_t *cb; diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index b9e693825873..847ae51a524b 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -1344,6 +1344,30 @@ out: return ret; } +static int write_compressed(struct feat_fd *ff __maybe_unused, + struct perf_evlist *evlist __maybe_unused) +{ + int ret; + + ret = do_write(ff, &(ff->ph->env.comp_ver), sizeof(ff->ph->env.comp_ver)); + if (ret) + return ret; + + ret = do_write(ff, &(ff->ph->env.comp_type), sizeof(ff->ph->env.comp_type)); + if (ret) + return ret; + + ret = do_write(ff, &(ff->ph->env.comp_level), sizeof(ff->ph->env.comp_level)); + if (ret) + return ret; + + ret = do_write(ff, &(ff->ph->env.comp_ratio), sizeof(ff->ph->env.comp_ratio)); + if (ret) + return ret; + + return do_write(ff, &(ff->ph->env.comp_mmap_len), sizeof(ff->ph->env.comp_mmap_len)); +} + static void print_hostname(struct feat_fd *ff, FILE *fp) { fprintf(fp, "# hostname : %s\n", ff->ph->env.hostname); @@ -1688,6 +1712,13 @@ static void print_cache(struct feat_fd *ff, FILE *fp __maybe_unused) } } +static void print_compressed(struct feat_fd *ff, FILE *fp) +{ + fprintf(fp, "# compressed : %s, level = %d, ratio = %d\n", + ff->ph->env.comp_type == PERF_COMP_ZSTD ? "Zstd" : "Unknown", + ff->ph->env.comp_level, ff->ph->env.comp_ratio); +} + static void print_pmu_mappings(struct feat_fd *ff, FILE *fp) { const char *delimiter = "# pmu mappings: "; @@ -2606,6 +2637,7 @@ static int process_bpf_prog_info(struct feat_fd *ff, void *data __maybe_unused) perf_env__insert_bpf_prog_info(env, info_node); } + up_write(&env->bpf_progs.lock); return 0; out: free(info_linear); @@ -2623,7 +2655,9 @@ static int process_bpf_prog_info(struct feat_fd *ff __maybe_unused, void *data _ static int process_bpf_btf(struct feat_fd *ff, void *data __maybe_unused) { struct perf_env *env = &ff->ph->env; + struct btf_node *node = NULL; u32 count, i; + int err = -1; if (ff->ph->needs_swap) { pr_warning("interpreting btf from systems with endianity is not yet supported\n"); @@ -2636,30 +2670,52 @@ static int process_bpf_btf(struct feat_fd *ff, void *data __maybe_unused) down_write(&env->bpf_progs.lock); for (i = 0; i < count; ++i) { - struct btf_node *node; u32 id, data_size; if (do_read_u32(ff, &id)) - return -1; + goto out; if (do_read_u32(ff, &data_size)) - return -1; + goto out; node = malloc(sizeof(struct btf_node) + data_size); if (!node) - return -1; + goto out; node->id = id; node->data_size = data_size; - if (__do_read(ff, node->data, data_size)) { - free(node); - return -1; - } + if (__do_read(ff, node->data, data_size)) + goto out; perf_env__insert_btf(env, node); + node = NULL; } + err = 0; +out: up_write(&env->bpf_progs.lock); + free(node); + return err; +} + +static int process_compressed(struct feat_fd *ff, + void *data __maybe_unused) +{ + if (do_read_u32(ff, &(ff->ph->env.comp_ver))) + return -1; + + if (do_read_u32(ff, &(ff->ph->env.comp_type))) + return -1; + + if (do_read_u32(ff, &(ff->ph->env.comp_level))) + return -1; + + if (do_read_u32(ff, &(ff->ph->env.comp_ratio))) + return -1; + + if (do_read_u32(ff, &(ff->ph->env.comp_mmap_len))) + return -1; + return 0; } @@ -2726,6 +2782,7 @@ static const struct feature_ops feat_ops[HEADER_LAST_FEATURE] = { FEAT_OPN(DIR_FORMAT, dir_format, false), FEAT_OPR(BPF_PROG_INFO, bpf_prog_info, false), FEAT_OPR(BPF_BTF, bpf_btf, false), + FEAT_OPR(COMPRESSED, compressed, false), }; struct header_print_data { diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h index 386da49e1bfa..5b3abe4172e2 100644 --- a/tools/perf/util/header.h +++ b/tools/perf/util/header.h @@ -42,6 +42,7 @@ enum { HEADER_DIR_FORMAT, HEADER_BPF_PROG_INFO, HEADER_BPF_BTF, + HEADER_COMPRESSED, HEADER_LAST_FEATURE, HEADER_FEAT_BITS = 256, }; diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c index 872fab163585..f4c3c84b090f 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -58,6 +58,7 @@ enum intel_pt_pkt_state { INTEL_PT_STATE_NO_IP, INTEL_PT_STATE_ERR_RESYNC, INTEL_PT_STATE_IN_SYNC, + INTEL_PT_STATE_TNT_CONT, INTEL_PT_STATE_TNT, INTEL_PT_STATE_TIP, INTEL_PT_STATE_TIP_PGD, @@ -72,8 +73,9 @@ static inline bool intel_pt_sample_time(enum intel_pt_pkt_state pkt_state) case INTEL_PT_STATE_NO_IP: case INTEL_PT_STATE_ERR_RESYNC: case INTEL_PT_STATE_IN_SYNC: - case INTEL_PT_STATE_TNT: + case INTEL_PT_STATE_TNT_CONT: return true; + case INTEL_PT_STATE_TNT: case INTEL_PT_STATE_TIP: case INTEL_PT_STATE_TIP_PGD: case INTEL_PT_STATE_FUP: @@ -888,16 +890,20 @@ static uint64_t intel_pt_next_period(struct intel_pt_decoder *decoder) timestamp = decoder->timestamp + decoder->timestamp_insn_cnt; masked_timestamp = timestamp & decoder->period_mask; if (decoder->continuous_period) { - if (masked_timestamp != decoder->last_masked_timestamp) + if (masked_timestamp > decoder->last_masked_timestamp) return 1; } else { timestamp += 1; masked_timestamp = timestamp & decoder->period_mask; - if (masked_timestamp != decoder->last_masked_timestamp) { + if (masked_timestamp > decoder->last_masked_timestamp) { decoder->last_masked_timestamp = masked_timestamp; decoder->continuous_period = true; } } + + if (masked_timestamp < decoder->last_masked_timestamp) + return decoder->period_ticks; + return decoder->period_ticks - (timestamp - masked_timestamp); } @@ -926,7 +932,10 @@ static void intel_pt_sample_insn(struct intel_pt_decoder *decoder) case INTEL_PT_PERIOD_TICKS: timestamp = decoder->timestamp + decoder->timestamp_insn_cnt; masked_timestamp = timestamp & decoder->period_mask; - decoder->last_masked_timestamp = masked_timestamp; + if (masked_timestamp > decoder->last_masked_timestamp) + decoder->last_masked_timestamp = masked_timestamp; + else + decoder->last_masked_timestamp += decoder->period_ticks; break; case INTEL_PT_PERIOD_NONE: case INTEL_PT_PERIOD_MTC: @@ -1254,7 +1263,9 @@ static int intel_pt_walk_tnt(struct intel_pt_decoder *decoder) return -ENOENT; } decoder->tnt.count -= 1; - if (!decoder->tnt.count) + if (decoder->tnt.count) + decoder->pkt_state = INTEL_PT_STATE_TNT_CONT; + else decoder->pkt_state = INTEL_PT_STATE_IN_SYNC; decoder->tnt.payload <<= 1; decoder->state.from_ip = decoder->ip; @@ -1285,7 +1296,9 @@ static int intel_pt_walk_tnt(struct intel_pt_decoder *decoder) if (intel_pt_insn.branch == INTEL_PT_BR_CONDITIONAL) { decoder->tnt.count -= 1; - if (!decoder->tnt.count) + if (decoder->tnt.count) + decoder->pkt_state = INTEL_PT_STATE_TNT_CONT; + else decoder->pkt_state = INTEL_PT_STATE_IN_SYNC; if (decoder->tnt.payload & BIT63) { decoder->tnt.payload <<= 1; @@ -1305,8 +1318,11 @@ static int intel_pt_walk_tnt(struct intel_pt_decoder *decoder) return 0; } decoder->ip += intel_pt_insn.length; - if (!decoder->tnt.count) + if (!decoder->tnt.count) { + decoder->sample_timestamp = decoder->timestamp; + decoder->sample_insn_cnt = decoder->timestamp_insn_cnt; return -EAGAIN; + } decoder->tnt.payload <<= 1; continue; } @@ -2365,6 +2381,7 @@ const struct intel_pt_state *intel_pt_decode(struct intel_pt_decoder *decoder) err = intel_pt_walk_trace(decoder); break; case INTEL_PT_STATE_TNT: + case INTEL_PT_STATE_TNT_CONT: err = intel_pt_walk_tnt(decoder); if (err == -EAGAIN) err = intel_pt_walk_trace(decoder); diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index 3c520baa198c..28a9541c4835 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -1234,8 +1234,9 @@ static char *get_kernel_version(const char *root_dir) if (!file) return NULL; - version[0] = '\0'; tmp = fgets(version, sizeof(version), file); + if (!tmp) + *version = '\0'; fclose(file); name = strstr(version, prefix); diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c index e32628cd20a7..ee71efb9db62 100644 --- a/tools/perf/util/map.c +++ b/tools/perf/util/map.c @@ -261,6 +261,22 @@ bool __map__is_extra_kernel_map(const struct map *map) return kmap && kmap->name[0]; } +bool __map__is_bpf_prog(const struct map *map) +{ + const char *name; + + if (map->dso->binary_type == DSO_BINARY_TYPE__BPF_PROG_INFO) + return true; + + /* + * If PERF_RECORD_BPF_EVENT is not included, the dso will not have + * type of DSO_BINARY_TYPE__BPF_PROG_INFO. In such cases, we can + * guess the type based on name. + */ + name = map->dso->short_name; + return name && (strstr(name, "bpf_prog_") == name); +} + bool map__has_symbols(const struct map *map) { return dso__has_symbols(map->dso); @@ -910,10 +926,8 @@ static void __maps__insert_name(struct maps *maps, struct map *map) rc = strcmp(m->dso->short_name, map->dso->short_name); if (rc < 0) p = &(*p)->rb_left; - else if (rc > 0) - p = &(*p)->rb_right; else - return; + p = &(*p)->rb_right; } rb_link_node(&map->rb_node_name, parent, p); rb_insert_color(&map->rb_node_name, &maps->names); diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h index 0e20749f2c55..dc93787c74f0 100644 --- a/tools/perf/util/map.h +++ b/tools/perf/util/map.h @@ -159,10 +159,12 @@ int map__set_kallsyms_ref_reloc_sym(struct map *map, const char *symbol_name, bool __map__is_kernel(const struct map *map); bool __map__is_extra_kernel_map(const struct map *map); +bool __map__is_bpf_prog(const struct map *map); static inline bool __map__is_kmodule(const struct map *map) { - return !__map__is_kernel(map) && !__map__is_extra_kernel_map(map); + return !__map__is_kernel(map) && !__map__is_extra_kernel_map(map) && + !__map__is_bpf_prog(map); } bool map__has_symbols(const struct map *map); diff --git a/tools/perf/util/mmap.c b/tools/perf/util/mmap.c index cdc7740fc181..868c0b0e909c 100644 --- a/tools/perf/util/mmap.c +++ b/tools/perf/util/mmap.c @@ -157,6 +157,10 @@ void __weak auxtrace_mmap_params__set_idx(struct auxtrace_mmap_params *mp __mayb } #ifdef HAVE_AIO_SUPPORT +static int perf_mmap__aio_enabled(struct perf_mmap *map) +{ + return map->aio.nr_cblocks > 0; +} #ifdef HAVE_LIBNUMA_SUPPORT static int perf_mmap__aio_alloc(struct perf_mmap *map, int idx) @@ -198,7 +202,7 @@ static int perf_mmap__aio_bind(struct perf_mmap *map, int idx, int cpu, int affi return 0; } -#else +#else /* !HAVE_LIBNUMA_SUPPORT */ static int perf_mmap__aio_alloc(struct perf_mmap *map, int idx) { map->aio.data[idx] = malloc(perf_mmap__mmap_len(map)); @@ -285,81 +289,12 @@ static void perf_mmap__aio_munmap(struct perf_mmap *map) zfree(&map->aio.cblocks); zfree(&map->aio.aiocb); } - -int perf_mmap__aio_push(struct perf_mmap *md, void *to, int idx, - int push(void *to, struct aiocb *cblock, void *buf, size_t size, off_t off), - off_t *off) +#else /* !HAVE_AIO_SUPPORT */ +static int perf_mmap__aio_enabled(struct perf_mmap *map __maybe_unused) { - u64 head = perf_mmap__read_head(md); - unsigned char *data = md->base + page_size; - unsigned long size, size0 = 0; - void *buf; - int rc = 0; - - rc = perf_mmap__read_init(md); - if (rc < 0) - return (rc == -EAGAIN) ? 0 : -1; - - /* - * md->base data is copied into md->data[idx] buffer to - * release space in the kernel buffer as fast as possible, - * thru perf_mmap__consume() below. - * - * That lets the kernel to proceed with storing more - * profiling data into the kernel buffer earlier than other - * per-cpu kernel buffers are handled. - * - * Coping can be done in two steps in case the chunk of - * profiling data crosses the upper bound of the kernel buffer. - * In this case we first move part of data from md->start - * till the upper bound and then the reminder from the - * beginning of the kernel buffer till the end of - * the data chunk. - */ - - size = md->end - md->start; - - if ((md->start & md->mask) + size != (md->end & md->mask)) { - buf = &data[md->start & md->mask]; - size = md->mask + 1 - (md->start & md->mask); - md->start += size; - memcpy(md->aio.data[idx], buf, size); - size0 = size; - } - - buf = &data[md->start & md->mask]; - size = md->end - md->start; - md->start += size; - memcpy(md->aio.data[idx] + size0, buf, size); - - /* - * Increment md->refcount to guard md->data[idx] buffer - * from premature deallocation because md object can be - * released earlier than aio write request started - * on mmap->data[idx] is complete. - * - * perf_mmap__put() is done at record__aio_complete() - * after started request completion. - */ - perf_mmap__get(md); - - md->prev = head; - perf_mmap__consume(md); - - rc = push(to, &md->aio.cblocks[idx], md->aio.data[idx], size0 + size, *off); - if (!rc) { - *off += size0 + size; - } else { - /* - * Decrement md->refcount back if aio write - * operation failed to start. - */ - perf_mmap__put(md); - } - - return rc; + return 0; } -#else + static int perf_mmap__aio_mmap(struct perf_mmap *map __maybe_unused, struct mmap_params *mp __maybe_unused) { @@ -374,6 +309,10 @@ static void perf_mmap__aio_munmap(struct perf_mmap *map __maybe_unused) void perf_mmap__munmap(struct perf_mmap *map) { perf_mmap__aio_munmap(map); + if (map->data != NULL) { + munmap(map->data, perf_mmap__mmap_len(map)); + map->data = NULL; + } if (map->base != NULL) { munmap(map->base, perf_mmap__mmap_len(map)); map->base = NULL; @@ -440,6 +379,21 @@ int perf_mmap__mmap(struct perf_mmap *map, struct mmap_params *mp, int fd, int c perf_mmap__setup_affinity_mask(map, mp); + map->flush = mp->flush; + + map->comp_level = mp->comp_level; + + if (map->comp_level && !perf_mmap__aio_enabled(map)) { + map->data = mmap(NULL, perf_mmap__mmap_len(map), PROT_READ|PROT_WRITE, + MAP_PRIVATE|MAP_ANONYMOUS, 0, 0); + if (map->data == MAP_FAILED) { + pr_debug2("failed to mmap data buffer, error %d\n", + errno); + map->data = NULL; + return -1; + } + } + if (auxtrace_mmap__mmap(&map->auxtrace_mmap, &mp->auxtrace_mp, map->base, fd)) return -1; @@ -492,7 +446,7 @@ static int __perf_mmap__read_init(struct perf_mmap *md) md->start = md->overwrite ? head : old; md->end = md->overwrite ? old : head; - if (md->start == md->end) + if ((md->end - md->start) < md->flush) return -EAGAIN; size = md->end - md->start; @@ -538,7 +492,7 @@ int perf_mmap__push(struct perf_mmap *md, void *to, rc = perf_mmap__read_init(md); if (rc < 0) - return (rc == -EAGAIN) ? 0 : -1; + return (rc == -EAGAIN) ? 1 : -1; size = md->end - md->start; diff --git a/tools/perf/util/mmap.h b/tools/perf/util/mmap.h index e566c19b242b..274ce389cd84 100644 --- a/tools/perf/util/mmap.h +++ b/tools/perf/util/mmap.h @@ -39,6 +39,9 @@ struct perf_mmap { } aio; #endif cpu_set_t affinity_mask; + u64 flush; + void *data; + int comp_level; }; /* @@ -70,7 +73,7 @@ enum bkw_mmap_state { }; struct mmap_params { - int prot, mask, nr_cblocks, affinity; + int prot, mask, nr_cblocks, affinity, flush, comp_level; struct auxtrace_mmap_params auxtrace_mp; }; @@ -98,18 +101,6 @@ union perf_event *perf_mmap__read_event(struct perf_mmap *map); int perf_mmap__push(struct perf_mmap *md, void *to, int push(struct perf_mmap *map, void *to, void *buf, size_t size)); -#ifdef HAVE_AIO_SUPPORT -int perf_mmap__aio_push(struct perf_mmap *md, void *to, int idx, - int push(void *to, struct aiocb *cblock, void *buf, size_t size, off_t off), - off_t *off); -#else -static inline int perf_mmap__aio_push(struct perf_mmap *md __maybe_unused, void *to __maybe_unused, int idx __maybe_unused, - int push(void *to, struct aiocb *cblock, void *buf, size_t size, off_t off) __maybe_unused, - off_t *off __maybe_unused) -{ - return 0; -} -#endif size_t perf_mmap__mmap_len(struct perf_mmap *map); diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 5ef4939408f2..cf0b9b81c5aa 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -317,10 +317,12 @@ static struct perf_evsel * __add_event(struct list_head *list, int *idx, struct perf_event_attr *attr, char *name, struct perf_pmu *pmu, - struct list_head *config_terms, bool auto_merge_stats) + struct list_head *config_terms, bool auto_merge_stats, + const char *cpu_list) { struct perf_evsel *evsel; - struct cpu_map *cpus = pmu ? pmu->cpus : NULL; + struct cpu_map *cpus = pmu ? pmu->cpus : + cpu_list ? cpu_map__new(cpu_list) : NULL; event_attr_init(attr); @@ -348,7 +350,25 @@ static int add_event(struct list_head *list, int *idx, struct perf_event_attr *attr, char *name, struct list_head *config_terms) { - return __add_event(list, idx, attr, name, NULL, config_terms, false) ? 0 : -ENOMEM; + return __add_event(list, idx, attr, name, NULL, config_terms, false, NULL) ? 0 : -ENOMEM; +} + +static int add_event_tool(struct list_head *list, int *idx, + enum perf_tool_event tool_event) +{ + struct perf_evsel *evsel; + struct perf_event_attr attr = { + .type = PERF_TYPE_SOFTWARE, + .config = PERF_COUNT_SW_DUMMY, + }; + + evsel = __add_event(list, idx, &attr, NULL, NULL, NULL, false, "0"); + if (!evsel) + return -ENOMEM; + evsel->tool_event = tool_event; + if (tool_event == PERF_TOOL_DURATION_TIME) + evsel->unit = strdup("ns"); + return 0; } static int parse_aliases(char *str, const char *names[][PERF_EVSEL__MAX_ALIASES], int size) @@ -930,6 +950,7 @@ static const char *config_term_names[__PARSE_EVENTS__TERM_TYPE_NR] = { [PARSE_EVENTS__TERM_TYPE_OVERWRITE] = "overwrite", [PARSE_EVENTS__TERM_TYPE_NOOVERWRITE] = "no-overwrite", [PARSE_EVENTS__TERM_TYPE_DRV_CFG] = "driver-config", + [PARSE_EVENTS__TERM_TYPE_PERCORE] = "percore", }; static bool config_term_shrinked; @@ -950,6 +971,7 @@ config_term_avail(int term_type, struct parse_events_error *err) case PARSE_EVENTS__TERM_TYPE_CONFIG2: case PARSE_EVENTS__TERM_TYPE_NAME: case PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD: + case PARSE_EVENTS__TERM_TYPE_PERCORE: return true; default: if (!err) @@ -1041,6 +1063,14 @@ do { \ case PARSE_EVENTS__TERM_TYPE_MAX_EVENTS: CHECK_TYPE_VAL(NUM); break; + case PARSE_EVENTS__TERM_TYPE_PERCORE: + CHECK_TYPE_VAL(NUM); + if ((unsigned int)term->val.num > 1) { + err->str = strdup("expected 0 or 1"); + err->idx = term->err_val; + return -EINVAL; + } + break; default: err->str = strdup("unknown term"); err->idx = term->err_term; @@ -1179,6 +1209,10 @@ do { \ case PARSE_EVENTS__TERM_TYPE_DRV_CFG: ADD_CONFIG_TERM(DRV_CFG, drv_cfg, term->val.str); break; + case PARSE_EVENTS__TERM_TYPE_PERCORE: + ADD_CONFIG_TERM(PERCORE, percore, + term->val.num ? true : false); + break; default: break; } @@ -1233,6 +1267,25 @@ int parse_events_add_numeric(struct parse_events_state *parse_state, get_config_name(head_config), &config_terms); } +int parse_events_add_tool(struct parse_events_state *parse_state, + struct list_head *list, + enum perf_tool_event tool_event) +{ + return add_event_tool(list, &parse_state->idx, tool_event); +} + +static bool config_term_percore(struct list_head *config_terms) +{ + struct perf_evsel_config_term *term; + + list_for_each_entry(term, config_terms, list) { + if (term->type == PERF_EVSEL__CONFIG_TERM_PERCORE) + return term->val.percore; + } + + return false; +} + int parse_events_add_pmu(struct parse_events_state *parse_state, struct list_head *list, char *name, struct list_head *head_config, @@ -1267,7 +1320,8 @@ int parse_events_add_pmu(struct parse_events_state *parse_state, if (!head_config) { attr.type = pmu->type; - evsel = __add_event(list, &parse_state->idx, &attr, NULL, pmu, NULL, auto_merge_stats); + evsel = __add_event(list, &parse_state->idx, &attr, NULL, pmu, NULL, + auto_merge_stats, NULL); if (evsel) { evsel->pmu_name = name; evsel->use_uncore_alias = use_uncore_alias; @@ -1295,7 +1349,7 @@ int parse_events_add_pmu(struct parse_events_state *parse_state, evsel = __add_event(list, &parse_state->idx, &attr, get_config_name(head_config), pmu, - &config_terms, auto_merge_stats); + &config_terms, auto_merge_stats, NULL); if (evsel) { evsel->unit = info.unit; evsel->scale = info.scale; @@ -1305,6 +1359,7 @@ int parse_events_add_pmu(struct parse_events_state *parse_state, evsel->metric_name = info.metric_name; evsel->pmu_name = name; evsel->use_uncore_alias = use_uncore_alias; + evsel->percore = config_term_percore(&evsel->config_terms); } return evsel ? 0 : -ENOMEM; @@ -2429,6 +2484,25 @@ out_enomem: return evt_num; } +static void print_tool_event(const char *name, const char *event_glob, + bool name_only) +{ + if (event_glob && !strglobmatch(name, event_glob)) + return; + if (name_only) + printf("%s ", name); + else + printf(" %-50s [%s]\n", name, "Tool event"); + +} + +void print_tool_events(const char *event_glob, bool name_only) +{ + print_tool_event("duration_time", event_glob, name_only); + if (pager_in_use()) + printf("\n"); +} + void print_symbol_events(const char *event_glob, unsigned type, struct event_symbol *syms, unsigned max, bool name_only) @@ -2512,6 +2586,7 @@ void print_events(const char *event_glob, bool name_only, bool quiet_flag, print_symbol_events(event_glob, PERF_TYPE_SOFTWARE, event_symbols_sw, PERF_COUNT_SW_MAX, name_only); + print_tool_events(event_glob, name_only); print_hwcache_events(event_glob, name_only); diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h index 5ed035cbcbb7..f7139e1a2fd3 100644 --- a/tools/perf/util/parse-events.h +++ b/tools/perf/util/parse-events.h @@ -75,6 +75,7 @@ enum { PARSE_EVENTS__TERM_TYPE_NOOVERWRITE, PARSE_EVENTS__TERM_TYPE_OVERWRITE, PARSE_EVENTS__TERM_TYPE_DRV_CFG, + PARSE_EVENTS__TERM_TYPE_PERCORE, __PARSE_EVENTS__TERM_TYPE_NR, }; @@ -160,6 +161,10 @@ int parse_events_add_numeric(struct parse_events_state *parse_state, struct list_head *list, u32 type, u64 config, struct list_head *head_config); +enum perf_tool_event; +int parse_events_add_tool(struct parse_events_state *parse_state, + struct list_head *list, + enum perf_tool_event tool_event); int parse_events_add_cache(struct list_head *list, int *idx, char *type, char *op_result1, char *op_result2, struct parse_events_error *error, @@ -200,6 +205,7 @@ extern struct event_symbol event_symbols_sw[]; void print_symbol_events(const char *event_glob, unsigned type, struct event_symbol *syms, unsigned max, bool name_only); +void print_tool_events(const char *event_glob, bool name_only); void print_tracepoint_events(const char *subsys_glob, const char *event_glob, bool name_only); int print_hwcache_events(const char *event_glob, bool name_only); diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l index 7805c71aaae2..ca6098874fe2 100644 --- a/tools/perf/util/parse-events.l +++ b/tools/perf/util/parse-events.l @@ -15,6 +15,7 @@ #include "../perf.h" #include "parse-events.h" #include "parse-events-bison.h" +#include "evsel.h" char *parse_events_get_text(yyscan_t yyscanner); YYSTYPE *parse_events_get_lval(yyscan_t yyscanner); @@ -154,6 +155,14 @@ static int sym(yyscan_t scanner, int type, int config) return type == PERF_TYPE_HARDWARE ? PE_VALUE_SYM_HW : PE_VALUE_SYM_SW; } +static int tool(yyscan_t scanner, enum perf_tool_event event) +{ + YYSTYPE *yylval = parse_events_get_lval(scanner); + + yylval->num = event; + return PE_VALUE_SYM_TOOL; +} + static int term(yyscan_t scanner, int type) { YYSTYPE *yylval = parse_events_get_lval(scanner); @@ -274,6 +283,7 @@ inherit { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_INHERIT); } no-inherit { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NOINHERIT); } overwrite { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_OVERWRITE); } no-overwrite { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_NOOVERWRITE); } +percore { return term(yyscanner, PARSE_EVENTS__TERM_TYPE_PERCORE); } , { return ','; } "/" { BEGIN(INITIAL); return '/'; } {name_minus} { return str(yyscanner, PE_NAME); } @@ -322,7 +332,7 @@ cpu-migrations|migrations { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COU alignment-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_ALIGNMENT_FAULTS); } emulation-faults { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_EMULATION_FAULTS); } dummy { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_DUMMY); } -duration_time { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_DUMMY); } +duration_time { return tool(yyscanner, PERF_TOOL_DURATION_TIME); } bpf-output { return sym(yyscanner, PERF_TYPE_SOFTWARE, PERF_COUNT_SW_BPF_OUTPUT); } /* diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y index 44819bdb037d..6ad8d4914969 100644 --- a/tools/perf/util/parse-events.y +++ b/tools/perf/util/parse-events.y @@ -14,6 +14,7 @@ #include <linux/types.h> #include "util.h" #include "pmu.h" +#include "evsel.h" #include "debug.h" #include "parse-events.h" #include "parse-events-bison.h" @@ -45,6 +46,7 @@ static void inc_group_count(struct list_head *list, %token PE_START_EVENTS PE_START_TERMS %token PE_VALUE PE_VALUE_SYM_HW PE_VALUE_SYM_SW PE_RAW PE_TERM +%token PE_VALUE_SYM_TOOL %token PE_EVENT_NAME %token PE_NAME %token PE_BPF_OBJECT PE_BPF_SOURCE @@ -58,6 +60,7 @@ static void inc_group_count(struct list_head *list, %type <num> PE_VALUE %type <num> PE_VALUE_SYM_HW %type <num> PE_VALUE_SYM_SW +%type <num> PE_VALUE_SYM_TOOL %type <num> PE_RAW %type <num> PE_TERM %type <str> PE_NAME @@ -321,6 +324,15 @@ value_sym sep_slash_slash_dc ABORT_ON(parse_events_add_numeric(_parse_state, list, type, config, NULL)); $$ = list; } +| +PE_VALUE_SYM_TOOL sep_slash_slash_dc +{ + struct list_head *list; + + ALLOC_LIST(list); + ABORT_ON(parse_events_add_tool(_parse_state, list, $1)); + $$ = list; +} event_legacy_cache: PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config diff --git a/tools/perf/util/parse-regs-options.c b/tools/perf/util/parse-regs-options.c index e6599e290f46..08581e276225 100644 --- a/tools/perf/util/parse-regs-options.c +++ b/tools/perf/util/parse-regs-options.c @@ -5,13 +5,14 @@ #include <subcmd/parse-options.h> #include "util/parse-regs-options.h" -int -parse_regs(const struct option *opt, const char *str, int unset) +static int +__parse_regs(const struct option *opt, const char *str, int unset, bool intr) { uint64_t *mode = (uint64_t *)opt->value; const struct sample_reg *r; char *s, *os = NULL, *p; int ret = -1; + uint64_t mask; if (unset) return 0; @@ -22,6 +23,11 @@ parse_regs(const struct option *opt, const char *str, int unset) if (*mode) return -1; + if (intr) + mask = arch__intr_reg_mask(); + else + mask = arch__user_reg_mask(); + /* str may be NULL in case no arg is passed to -I */ if (str) { /* because str is read-only */ @@ -37,19 +43,20 @@ parse_regs(const struct option *opt, const char *str, int unset) if (!strcmp(s, "?")) { fprintf(stderr, "available registers: "); for (r = sample_reg_masks; r->name; r++) { - fprintf(stderr, "%s ", r->name); + if (r->mask & mask) + fprintf(stderr, "%s ", r->name); } fputc('\n', stderr); /* just printing available regs */ return -1; } for (r = sample_reg_masks; r->name; r++) { - if (!strcasecmp(s, r->name)) + if ((r->mask & mask) && !strcasecmp(s, r->name)) break; } if (!r->name) { - ui__warning("unknown register %s," - " check man page\n", s); + ui__warning("Unknown register \"%s\", check man page or run \"perf record %s?\"\n", + s, intr ? "-I" : "--user-regs="); goto error; } @@ -65,8 +72,20 @@ parse_regs(const struct option *opt, const char *str, int unset) /* default to all possible regs */ if (*mode == 0) - *mode = PERF_REGS_MASK; + *mode = mask; error: free(os); return ret; } + +int +parse_user_regs(const struct option *opt, const char *str, int unset) +{ + return __parse_regs(opt, str, unset, false); +} + +int +parse_intr_regs(const struct option *opt, const char *str, int unset) +{ + return __parse_regs(opt, str, unset, true); +} diff --git a/tools/perf/util/parse-regs-options.h b/tools/perf/util/parse-regs-options.h index cdefb1acf6be..2b23d25c6394 100644 --- a/tools/perf/util/parse-regs-options.h +++ b/tools/perf/util/parse-regs-options.h @@ -2,5 +2,6 @@ #ifndef _PERF_PARSE_REGS_OPTIONS_H #define _PERF_PARSE_REGS_OPTIONS_H 1 struct option; -int parse_regs(const struct option *opt, const char *str, int unset); +int parse_user_regs(const struct option *opt, const char *str, int unset); +int parse_intr_regs(const struct option *opt, const char *str, int unset); #endif /* _PERF_PARSE_REGS_OPTIONS_H */ diff --git a/tools/perf/util/perf_regs.c b/tools/perf/util/perf_regs.c index 2acfcc527cac..2774cec1f15f 100644 --- a/tools/perf/util/perf_regs.c +++ b/tools/perf/util/perf_regs.c @@ -13,6 +13,16 @@ int __weak arch_sdt_arg_parse_op(char *old_op __maybe_unused, return SDT_ARG_SKIP; } +uint64_t __weak arch__intr_reg_mask(void) +{ + return PERF_REGS_MASK; +} + +uint64_t __weak arch__user_reg_mask(void) +{ + return PERF_REGS_MASK; +} + #ifdef HAVE_PERF_REGS_SUPPORT int perf_reg_value(u64 *valp, struct regs_dump *regs, int id) { diff --git a/tools/perf/util/perf_regs.h b/tools/perf/util/perf_regs.h index c9319f8d17a6..cb9c246c8962 100644 --- a/tools/perf/util/perf_regs.h +++ b/tools/perf/util/perf_regs.h @@ -12,6 +12,7 @@ struct sample_reg { uint64_t mask; }; #define SMPL_REG(n, b) { .name = #n, .mask = 1ULL << (b) } +#define SMPL_REG2(n, b) { .name = #n, .mask = 3ULL << (b) } #define SMPL_REG_END { .name = NULL } extern const struct sample_reg sample_reg_masks[]; @@ -22,6 +23,8 @@ enum { }; int arch_sdt_arg_parse_op(char *old_op, char **new_op); +uint64_t arch__intr_reg_mask(void); +uint64_t arch__user_reg_mask(void); #ifdef HAVE_PERF_REGS_SUPPORT #include <perf_regs.h> diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index dda0ac978b1e..6aa7e2352e16 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -342,7 +342,7 @@ static bool is_tracepoint(struct pyrf_event *pevent) static PyObject* tracepoint_field(struct pyrf_event *pe, struct tep_format_field *field) { - struct tep_handle *pevent = field->event->pevent; + struct tep_handle *pevent = field->event->tep; void *data = pe->sample.raw_data; PyObject *ret = NULL; unsigned long long val; diff --git a/tools/perf/util/scripting-engines/trace-event-perl.c b/tools/perf/util/scripting-engines/trace-event-perl.c index 5f06378a482b..61aa7f3df915 100644 --- a/tools/perf/util/scripting-engines/trace-event-perl.c +++ b/tools/perf/util/scripting-engines/trace-event-perl.c @@ -372,7 +372,7 @@ static void perl_process_tracepoint(struct perf_sample *sample, ns = nsecs - s * NSEC_PER_SEC; scripting_context->event_data = data; - scripting_context->pevent = evsel->tp_format->pevent; + scripting_context->pevent = evsel->tp_format->tep; ENTER; SAVETMPS; diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c index 09604c6508f0..22f52b669871 100644 --- a/tools/perf/util/scripting-engines/trace-event-python.c +++ b/tools/perf/util/scripting-engines/trace-event-python.c @@ -837,7 +837,7 @@ static void python_process_tracepoint(struct perf_sample *sample, ns = nsecs - s * NSEC_PER_SEC; scripting_context->event_data = data; - scripting_context->pevent = evsel->tp_format->pevent; + scripting_context->pevent = evsel->tp_format->tep; context = _PyCapsule_New(scripting_context, NULL, NULL); diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index b17f1c9bc965..2310a1752983 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -29,6 +29,61 @@ #include "stat.h" #include "arch/common.h" +#ifdef HAVE_ZSTD_SUPPORT +static int perf_session__process_compressed_event(struct perf_session *session, + union perf_event *event, u64 file_offset) +{ + void *src; + size_t decomp_size, src_size; + u64 decomp_last_rem = 0; + size_t decomp_len = session->header.env.comp_mmap_len; + struct decomp *decomp, *decomp_last = session->decomp_last; + + decomp = mmap(NULL, sizeof(struct decomp) + decomp_len, PROT_READ|PROT_WRITE, + MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); + if (decomp == MAP_FAILED) { + pr_err("Couldn't allocate memory for decompression\n"); + return -1; + } + + decomp->file_pos = file_offset; + decomp->head = 0; + + if (decomp_last) { + decomp_last_rem = decomp_last->size - decomp_last->head; + memcpy(decomp->data, &(decomp_last->data[decomp_last->head]), decomp_last_rem); + decomp->size = decomp_last_rem; + } + + src = (void *)event + sizeof(struct compressed_event); + src_size = event->pack.header.size - sizeof(struct compressed_event); + + decomp_size = zstd_decompress_stream(&(session->zstd_data), src, src_size, + &(decomp->data[decomp_last_rem]), decomp_len - decomp_last_rem); + if (!decomp_size) { + munmap(decomp, sizeof(struct decomp) + decomp_len); + pr_err("Couldn't decompress data\n"); + return -1; + } + + decomp->size += decomp_size; + + if (session->decomp == NULL) { + session->decomp = decomp; + session->decomp_last = decomp; + } else { + session->decomp_last->next = decomp; + session->decomp_last = decomp; + } + + pr_debug("decomp (B): %ld to %ld\n", src_size, decomp_size); + + return 0; +} +#else /* !HAVE_ZSTD_SUPPORT */ +#define perf_session__process_compressed_event perf_session__process_compressed_event_stub +#endif + static int perf_session__deliver_event(struct perf_session *session, union perf_event *event, struct perf_tool *tool, @@ -197,6 +252,21 @@ static void perf_session__delete_threads(struct perf_session *session) machine__delete_threads(&session->machines.host); } +static void perf_session__release_decomp_events(struct perf_session *session) +{ + struct decomp *next, *decomp; + size_t decomp_len; + next = session->decomp; + decomp_len = session->header.env.comp_mmap_len; + do { + decomp = next; + if (decomp == NULL) + break; + next = decomp->next; + munmap(decomp, decomp_len + sizeof(struct decomp)); + } while (1); +} + void perf_session__delete(struct perf_session *session) { if (session == NULL) @@ -205,6 +275,7 @@ void perf_session__delete(struct perf_session *session) auxtrace_index__free(&session->auxtrace_index); perf_session__destroy_kernel_maps(session); perf_session__delete_threads(session); + perf_session__release_decomp_events(session); perf_env__exit(&session->header.env); machines__exit(&session->machines); if (session->data) @@ -358,6 +429,14 @@ static int process_stat_round_stub(struct perf_session *perf_session __maybe_unu return 0; } +static int perf_session__process_compressed_event_stub(struct perf_session *session __maybe_unused, + union perf_event *event __maybe_unused, + u64 file_offset __maybe_unused) +{ + dump_printf(": unhandled!\n"); + return 0; +} + void perf_tool__fill_defaults(struct perf_tool *tool) { if (tool->sample == NULL) @@ -430,6 +509,8 @@ void perf_tool__fill_defaults(struct perf_tool *tool) tool->time_conv = process_event_op2_stub; if (tool->feature == NULL) tool->feature = process_event_op2_stub; + if (tool->compressed == NULL) + tool->compressed = perf_session__process_compressed_event; } static void swap_sample_id_all(union perf_event *event, void *data) @@ -1373,7 +1454,9 @@ static s64 perf_session__process_user_event(struct perf_session *session, int fd = perf_data__fd(session->data); int err; - dump_event(session->evlist, event, file_offset, &sample); + if (event->header.type != PERF_RECORD_COMPRESSED || + tool->compressed == perf_session__process_compressed_event_stub) + dump_event(session->evlist, event, file_offset, &sample); /* These events are processed right away */ switch (event->header.type) { @@ -1426,6 +1509,11 @@ static s64 perf_session__process_user_event(struct perf_session *session, return tool->time_conv(session, event); case PERF_RECORD_HEADER_FEATURE: return tool->feature(session, event); + case PERF_RECORD_COMPRESSED: + err = tool->compressed(session, event, file_offset); + if (err) + dump_event(session->evlist, event, file_offset, &sample); + return err; default: return -EINVAL; } @@ -1708,6 +1796,8 @@ static int perf_session__flush_thread_stacks(struct perf_session *session) volatile int session_done; +static int __perf_session__process_decomp_events(struct perf_session *session); + static int __perf_session__process_pipe_events(struct perf_session *session) { struct ordered_events *oe = &session->ordered_events; @@ -1788,6 +1878,10 @@ more: if (skip > 0) head += skip; + err = __perf_session__process_decomp_events(session); + if (err) + goto out_err; + if (!session_done()) goto more; done: @@ -1836,6 +1930,39 @@ fetch_mmaped_event(struct perf_session *session, return event; } +static int __perf_session__process_decomp_events(struct perf_session *session) +{ + s64 skip; + u64 size, file_pos = 0; + struct decomp *decomp = session->decomp_last; + + if (!decomp) + return 0; + + while (decomp->head < decomp->size && !session_done()) { + union perf_event *event = fetch_mmaped_event(session, decomp->head, decomp->size, decomp->data); + + if (!event) + break; + + size = event->header.size; + + if (size < sizeof(struct perf_event_header) || + (skip = perf_session__process_event(session, event, file_pos)) < 0) { + pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", + decomp->file_pos + decomp->head, event->header.size, event->header.type); + return -EINVAL; + } + + if (skip) + size += skip; + + decomp->head += size; + } + + return 0; +} + /* * On 64bit we can mmap the data file in one go. No need for tiny mmap * slices. On 32bit we use 32MB. @@ -1928,12 +2055,14 @@ more: size = event->header.size; + skip = -EINVAL; + if (size < sizeof(struct perf_event_header) || (skip = rd->process(session, event, file_pos)) < 0) { - pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", + pr_err("%#" PRIx64 " [%#x]: failed to process type: %d [%s]\n", file_offset + head, event->header.size, - event->header.type); - err = -EINVAL; + event->header.type, strerror(-skip)); + err = skip; goto out; } @@ -1943,6 +2072,10 @@ more: head += size; file_pos += size; + err = __perf_session__process_decomp_events(session); + if (err) + goto out; + ui_progress__update(prog, size); if (session_done()) diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index d96eccd7d27f..dd8920b745bc 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -8,6 +8,7 @@ #include "machine.h" #include "data.h" #include "ordered-events.h" +#include "util/compress.h" #include <linux/kernel.h> #include <linux/rbtree.h> #include <linux/perf_event.h> @@ -35,6 +36,19 @@ struct perf_session { struct ordered_events ordered_events; struct perf_data *data; struct perf_tool *tool; + u64 bytes_transferred; + u64 bytes_compressed; + struct zstd_data zstd_data; + struct decomp *decomp; + struct decomp *decomp_last; +}; + +struct decomp { + struct decomp *next; + u64 file_pos; + u64 head; + size_t size; + char data[]; }; struct perf_tool; diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c index 6d043c78f3c2..4c53bae5644b 100644 --- a/tools/perf/util/stat-display.c +++ b/tools/perf/util/stat-display.c @@ -18,11 +18,6 @@ #define CNTR_NOT_SUPPORTED "<not supported>" #define CNTR_NOT_COUNTED "<not counted>" -static bool is_duration_time(struct perf_evsel *evsel) -{ - return !strcmp(evsel->name, "duration_time"); -} - static void print_running(struct perf_stat_config *config, u64 run, u64 ena) { @@ -93,9 +88,17 @@ static void aggr_printout(struct perf_stat_config *config, config->csv_sep); break; case AGGR_NONE: - fprintf(config->output, "CPU%*d%s", - config->csv_output ? 0 : -4, - perf_evsel__cpus(evsel)->map[id], config->csv_sep); + if (evsel->percore) { + fprintf(config->output, "S%d-C%*d%s", + cpu_map__id_to_socket(id), + config->csv_output ? 0 : -5, + cpu_map__id_to_cpu(id), config->csv_sep); + } else { + fprintf(config->output, "CPU%*d%s ", + config->csv_output ? 0 : -5, + perf_evsel__cpus(evsel)->map[id], + config->csv_sep); + } break; case AGGR_THREAD: fprintf(config->output, "%*s-%*d%s", @@ -599,6 +602,41 @@ static void aggr_cb(struct perf_stat_config *config, } } +static void print_counter_aggrdata(struct perf_stat_config *config, + struct perf_evsel *counter, int s, + char *prefix, bool metric_only, + bool *first) +{ + struct aggr_data ad; + FILE *output = config->output; + u64 ena, run, val; + int id, nr; + double uval; + + ad.id = id = config->aggr_map->map[s]; + ad.val = ad.ena = ad.run = 0; + ad.nr = 0; + if (!collect_data(config, counter, aggr_cb, &ad)) + return; + + nr = ad.nr; + ena = ad.ena; + run = ad.run; + val = ad.val; + if (*first && metric_only) { + *first = false; + aggr_printout(config, counter, id, nr); + } + if (prefix && !metric_only) + fprintf(output, "%s", prefix); + + uval = val * counter->scale; + printout(config, id, nr, counter, uval, prefix, + run, ena, 1.0, &rt_stat); + if (!metric_only) + fputc('\n', output); +} + static void print_aggr(struct perf_stat_config *config, struct perf_evlist *evlist, char *prefix) @@ -606,9 +644,7 @@ static void print_aggr(struct perf_stat_config *config, bool metric_only = config->metric_only; FILE *output = config->output; struct perf_evsel *counter; - int s, id, nr; - double uval; - u64 ena, run, val; + int s; bool first; if (!(config->aggr_map || config->aggr_get_id)) @@ -621,36 +657,14 @@ static void print_aggr(struct perf_stat_config *config, * Without each counter has its own line. */ for (s = 0; s < config->aggr_map->nr; s++) { - struct aggr_data ad; if (prefix && metric_only) fprintf(output, "%s", prefix); - ad.id = id = config->aggr_map->map[s]; first = true; evlist__for_each_entry(evlist, counter) { - if (is_duration_time(counter)) - continue; - - ad.val = ad.ena = ad.run = 0; - ad.nr = 0; - if (!collect_data(config, counter, aggr_cb, &ad)) - continue; - nr = ad.nr; - ena = ad.ena; - run = ad.run; - val = ad.val; - if (first && metric_only) { - first = false; - aggr_printout(config, counter, id, nr); - } - if (prefix && !metric_only) - fprintf(output, "%s", prefix); - - uval = val * counter->scale; - printout(config, id, nr, counter, uval, prefix, - run, ena, 1.0, &rt_stat); - if (!metric_only) - fputc('\n', output); + print_counter_aggrdata(config, counter, s, + prefix, metric_only, + &first); } if (metric_only) fputc('\n', output); @@ -848,8 +862,6 @@ static void print_no_aggr_metric(struct perf_stat_config *config, if (prefix) fputs(prefix, config->output); evlist__for_each_entry(evlist, counter) { - if (is_duration_time(counter)) - continue; if (first) { aggr_printout(config, counter, cpu, 0); first = false; @@ -906,8 +918,6 @@ static void print_metric_headers(struct perf_stat_config *config, /* Print metrics headers only */ evlist__for_each_entry(evlist, counter) { - if (is_duration_time(counter)) - continue; os.evsel = counter; out.ctx = &os; out.print_metric = print_metric_header; @@ -1101,6 +1111,30 @@ static void print_footer(struct perf_stat_config *config) "the same PMU. Try reorganizing the group.\n"); } +static void print_percore(struct perf_stat_config *config, + struct perf_evsel *counter, char *prefix) +{ + bool metric_only = config->metric_only; + FILE *output = config->output; + int s; + bool first = true; + + if (!(config->aggr_map || config->aggr_get_id)) + return; + + for (s = 0; s < config->aggr_map->nr; s++) { + if (prefix && metric_only) + fprintf(output, "%s", prefix); + + print_counter_aggrdata(config, counter, s, + prefix, metric_only, + &first); + } + + if (metric_only) + fputc('\n', output); +} + void perf_evlist__print_counters(struct perf_evlist *evlist, struct perf_stat_config *config, @@ -1136,15 +1170,11 @@ perf_evlist__print_counters(struct perf_evlist *evlist, break; case AGGR_THREAD: evlist__for_each_entry(evlist, counter) { - if (is_duration_time(counter)) - continue; print_aggr_thread(config, _target, counter, prefix); } break; case AGGR_GLOBAL: evlist__for_each_entry(evlist, counter) { - if (is_duration_time(counter)) - continue; print_counter_aggr(config, counter, prefix); } if (metric_only) @@ -1155,9 +1185,10 @@ perf_evlist__print_counters(struct perf_evlist *evlist, print_no_aggr_metric(config, evlist, prefix); else { evlist__for_each_entry(evlist, counter) { - if (is_duration_time(counter)) - continue; - print_counter(config, counter, prefix); + if (counter->percore) + print_percore(config, counter, prefix); + else + print_counter(config, counter, prefix); } } break; diff --git a/tools/perf/util/stat.c b/tools/perf/util/stat.c index 2856cc9d5a31..c3115d939b0b 100644 --- a/tools/perf/util/stat.c +++ b/tools/perf/util/stat.c @@ -277,9 +277,11 @@ process_counter_values(struct perf_stat_config *config, struct perf_evsel *evsel if (!evsel->snapshot) perf_evsel__compute_deltas(evsel, cpu, thread, count); perf_counts_values__scale(count, config->scale, NULL); - if (config->aggr_mode == AGGR_NONE) - perf_stat__update_shadow_stats(evsel, count->val, cpu, - &rt_stat); + if ((config->aggr_mode == AGGR_NONE) && (!evsel->percore)) { + perf_stat__update_shadow_stats(evsel, count->val, + cpu, &rt_stat); + } + if (config->aggr_mode == AGGR_THREAD) { if (config->stats) perf_stat__update_shadow_stats(evsel, diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c index 50678d318185..403045a2bbea 100644 --- a/tools/perf/util/thread.c +++ b/tools/perf/util/thread.c @@ -15,6 +15,7 @@ #include "map.h" #include "symbol.h" #include "unwind.h" +#include "callchain.h" #include <api/fs/fs.h> @@ -327,7 +328,7 @@ static int thread__prepare_access(struct thread *thread) { int err = 0; - if (symbol_conf.use_callchain) + if (dwarf_callchain_users) err = __thread__prepare_access(thread); return err; diff --git a/tools/perf/util/tool.h b/tools/perf/util/tool.h index 250391672f9f..9096a6e3de59 100644 --- a/tools/perf/util/tool.h +++ b/tools/perf/util/tool.h @@ -28,6 +28,7 @@ typedef int (*event_attr_op)(struct perf_tool *tool, typedef int (*event_op2)(struct perf_session *session, union perf_event *event); typedef s64 (*event_op3)(struct perf_session *session, union perf_event *event); +typedef int (*event_op4)(struct perf_session *session, union perf_event *event, u64 data); typedef int (*event_oe)(struct perf_tool *tool, union perf_event *event, struct ordered_events *oe); @@ -72,6 +73,7 @@ struct perf_tool { stat, stat_round, feature; + event_op4 compressed; event_op3 auxtrace; bool ordered_events; bool ordering_requires_timestamps; diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c index ad74be1f0e42..863955e4094e 100644 --- a/tools/perf/util/trace-event-parse.c +++ b/tools/perf/util/trace-event-parse.c @@ -111,7 +111,7 @@ raw_field_value(struct tep_event *event, const char *name, void *data) unsigned long long read_size(struct tep_event *event, void *ptr, int size) { - return tep_read_number(event->pevent, ptr, size); + return tep_read_number(event->tep, ptr, size); } void event_format__fprintf(struct tep_event *event, diff --git a/tools/perf/util/trace-event-read.c b/tools/perf/util/trace-event-read.c index efe2f58cff4e..48d53d8e3e16 100644 --- a/tools/perf/util/trace-event-read.c +++ b/tools/perf/util/trace-event-read.c @@ -442,7 +442,7 @@ ssize_t trace_report(int fd, struct trace_event *tevent, bool __repipe) tep_set_flag(pevent, TEP_NSEC_OUTPUT); tep_set_file_bigendian(pevent, file_bigendian); - tep_set_host_bigendian(pevent, host_bigendian); + tep_set_local_bigendian(pevent, host_bigendian); if (do_read(buf, 1) < 0) goto out; diff --git a/tools/perf/util/trace-event.c b/tools/perf/util/trace-event.c index cbe0dd758e3a..01b9d89bf5bf 100644 --- a/tools/perf/util/trace-event.c +++ b/tools/perf/util/trace-event.c @@ -40,7 +40,7 @@ int trace_event__init(struct trace_event *t) static int trace_event__init2(void) { - int be = tep_host_bigendian(); + int be = tep_is_bigendian(); struct tep_handle *pevent; if (trace_event__init(&tevent)) @@ -49,7 +49,7 @@ static int trace_event__init2(void) pevent = tevent.pevent; tep_set_flag(pevent, TEP_NSEC_OUTPUT); tep_set_file_bigendian(pevent, be); - tep_set_host_bigendian(pevent, be); + tep_set_local_bigendian(pevent, be); tevent_initialized = true; return 0; } diff --git a/tools/perf/util/unwind-libunwind-local.c b/tools/perf/util/unwind-libunwind-local.c index f3c666a84e4d..25e1406b1f8b 100644 --- a/tools/perf/util/unwind-libunwind-local.c +++ b/tools/perf/util/unwind-libunwind-local.c @@ -617,8 +617,6 @@ static unw_accessors_t accessors = { static int _unwind__prepare_access(struct thread *thread) { - if (!dwarf_callchain_users) - return 0; thread->addr_space = unw_create_addr_space(&accessors, 0); if (!thread->addr_space) { pr_err("unwind: Can't create unwind address space.\n"); @@ -631,15 +629,11 @@ static int _unwind__prepare_access(struct thread *thread) static void _unwind__flush_access(struct thread *thread) { - if (!dwarf_callchain_users) - return; unw_flush_cache(thread->addr_space, 0, 0); } static void _unwind__finish_access(struct thread *thread) { - if (!dwarf_callchain_users) - return; unw_destroy_addr_space(thread->addr_space); } diff --git a/tools/perf/util/unwind-libunwind.c b/tools/perf/util/unwind-libunwind.c index 9778b3133b77..c0811977d7d5 100644 --- a/tools/perf/util/unwind-libunwind.c +++ b/tools/perf/util/unwind-libunwind.c @@ -5,6 +5,7 @@ #include "session.h" #include "debug.h" #include "env.h" +#include "callchain.h" struct unwind_libunwind_ops __weak *local_unwind_libunwind_ops; struct unwind_libunwind_ops __weak *x86_32_unwind_libunwind_ops; @@ -24,6 +25,9 @@ int unwind__prepare_access(struct thread *thread, struct map *map, struct unwind_libunwind_ops *ops = local_unwind_libunwind_ops; int err; + if (!dwarf_callchain_users) + return 0; + if (thread->addr_space) { pr_debug("unwind: thread map already set, dso=%s\n", map->dso->name); @@ -65,12 +69,18 @@ out_register: void unwind__flush_access(struct thread *thread) { + if (!dwarf_callchain_users) + return; + if (thread->unwind_libunwind_ops) thread->unwind_libunwind_ops->flush_access(thread); } void unwind__finish_access(struct thread *thread) { + if (!dwarf_callchain_users) + return; + if (thread->unwind_libunwind_ops) thread->unwind_libunwind_ops->finish_access(thread); } diff --git a/tools/perf/util/zstd.c b/tools/perf/util/zstd.c new file mode 100644 index 000000000000..23bdb9884576 --- /dev/null +++ b/tools/perf/util/zstd.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <string.h> + +#include "util/compress.h" +#include "util/debug.h" + +int zstd_init(struct zstd_data *data, int level) +{ + size_t ret; + + data->dstream = ZSTD_createDStream(); + if (data->dstream == NULL) { + pr_err("Couldn't create decompression stream.\n"); + return -1; + } + + ret = ZSTD_initDStream(data->dstream); + if (ZSTD_isError(ret)) { + pr_err("Failed to initialize decompression stream: %s\n", ZSTD_getErrorName(ret)); + return -1; + } + + if (!level) + return 0; + + data->cstream = ZSTD_createCStream(); + if (data->cstream == NULL) { + pr_err("Couldn't create compression stream.\n"); + return -1; + } + + ret = ZSTD_initCStream(data->cstream, level); + if (ZSTD_isError(ret)) { + pr_err("Failed to initialize compression stream: %s\n", ZSTD_getErrorName(ret)); + return -1; + } + + return 0; +} + +int zstd_fini(struct zstd_data *data) +{ + if (data->dstream) { + ZSTD_freeDStream(data->dstream); + data->dstream = NULL; + } + + if (data->cstream) { + ZSTD_freeCStream(data->cstream); + data->cstream = NULL; + } + + return 0; +} + +size_t zstd_compress_stream_to_records(struct zstd_data *data, void *dst, size_t dst_size, + void *src, size_t src_size, size_t max_record_size, + size_t process_header(void *record, size_t increment)) +{ + size_t ret, size, compressed = 0; + ZSTD_inBuffer input = { src, src_size, 0 }; + ZSTD_outBuffer output; + void *record; + + while (input.pos < input.size) { + record = dst; + size = process_header(record, 0); + compressed += size; + dst += size; + dst_size -= size; + output = (ZSTD_outBuffer){ dst, (dst_size > max_record_size) ? + max_record_size : dst_size, 0 }; + ret = ZSTD_compressStream(data->cstream, &output, &input); + ZSTD_flushStream(data->cstream, &output); + if (ZSTD_isError(ret)) { + pr_err("failed to compress %ld bytes: %s\n", + (long)src_size, ZSTD_getErrorName(ret)); + memcpy(dst, src, src_size); + return src_size; + } + size = output.pos; + size = process_header(record, size); + compressed += size; + dst += size; + dst_size -= size; + } + + return compressed; +} + +size_t zstd_decompress_stream(struct zstd_data *data, void *src, size_t src_size, + void *dst, size_t dst_size) +{ + size_t ret; + ZSTD_inBuffer input = { src, src_size, 0 }; + ZSTD_outBuffer output = { dst, dst_size, 0 }; + + while (input.pos < input.size) { + ret = ZSTD_decompressStream(data->dstream, &output, &input); + if (ZSTD_isError(ret)) { + pr_err("failed to decompress (B): %ld -> %ld : %s\n", + src_size, output.size, ZSTD_getErrorName(ret)); + break; + } + output.dst = dst + output.pos; + output.size = dst_size - output.pos; + } + + return output.pos; +} diff --git a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c index 2a1fd9182f94..d1f3d44e315e 100644 --- a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c +++ b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c @@ -19,7 +19,7 @@ ACPI_MODULE_NAME("oslinuxtbl") typedef struct osl_table_info { struct osl_table_info *next; u32 instance; - char signature[ACPI_NAME_SIZE]; + char signature[ACPI_NAMESEG_SIZE]; } osl_table_info; @@ -286,14 +286,14 @@ static acpi_status osl_add_table_to_list(char *signature, u32 instance) return (AE_NO_MEMORY); } - ACPI_MOVE_NAME(new_info->signature, signature); + ACPI_COPY_NAMESEG(new_info->signature, signature); if (!gbl_table_list_head) { gbl_table_list_head = new_info; } else { next = gbl_table_list_head; while (1) { - if (ACPI_COMPARE_NAME(next->signature, signature)) { + if (ACPI_COMPARE_NAMESEG(next->signature, signature)) { if (next->instance == instance) { found = TRUE; } @@ -782,11 +782,11 @@ osl_get_bios_table(char *signature, /* Handle special tables whose addresses are not in RSDT/XSDT */ - if (ACPI_COMPARE_NAME(signature, ACPI_RSDP_NAME) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_RSDT) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_XSDT) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_DSDT) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_FACS)) { + if (ACPI_COMPARE_NAMESEG(signature, ACPI_RSDP_NAME) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_RSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_XSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_DSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_FACS)) { find_next_instance: @@ -797,7 +797,7 @@ find_next_instance: * careful about the FADT length and validate table addresses. * Note: The 64-bit addresses have priority. */ - if (ACPI_COMPARE_NAME(signature, ACPI_SIG_DSDT)) { + if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_DSDT)) { if (current_instance < 2) { if ((gbl_fadt->header.length >= MIN_FADT_FOR_XDSDT) && gbl_fadt->Xdsdt @@ -815,7 +815,7 @@ find_next_instance: dsdt; } } - } else if (ACPI_COMPARE_NAME(signature, ACPI_SIG_FACS)) { + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_FACS)) { if (current_instance < 2) { if ((gbl_fadt->header.length >= MIN_FADT_FOR_XFACS) && gbl_fadt->Xfacs @@ -833,7 +833,7 @@ find_next_instance: facs; } } - } else if (ACPI_COMPARE_NAME(signature, ACPI_SIG_XSDT)) { + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_XSDT)) { if (!gbl_revision) { return (AE_BAD_SIGNATURE); } @@ -842,7 +842,7 @@ find_next_instance: (acpi_physical_address)gbl_rsdp. xsdt_physical_address; } - } else if (ACPI_COMPARE_NAME(signature, ACPI_SIG_RSDT)) { + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_RSDT)) { if (current_instance == 0) { table_address = (acpi_physical_address)gbl_rsdp. @@ -931,7 +931,7 @@ find_next_instance: /* Does this table match the requested signature? */ - if (!ACPI_COMPARE_NAME + if (!ACPI_COMPARE_NAMESEG (mapped_table->signature, signature)) { osl_unmap_table(mapped_table); mapped_table = NULL; @@ -995,7 +995,7 @@ static acpi_status osl_list_customized_tables(char *directory) { void *table_dir; u32 instance; - char temp_name[ACPI_NAME_SIZE]; + char temp_name[ACPI_NAMESEG_SIZE]; char *filename; acpi_status status = AE_OK; @@ -1086,8 +1086,8 @@ osl_map_table(acpi_size address, return (AE_BAD_SIGNATURE); } } else - if (!ACPI_COMPARE_NAME(signature, mapped_table->signature)) - { + if (!ACPI_COMPARE_NAMESEG + (signature, mapped_table->signature)) { acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); return (AE_BAD_SIGNATURE); @@ -1158,15 +1158,15 @@ osl_table_name_from_file(char *filename, char *signature, u32 *instance) /* Ignore meaningless files */ - if (strlen(filename) < ACPI_NAME_SIZE) { + if (strlen(filename) < ACPI_NAMESEG_SIZE) { return (AE_BAD_SIGNATURE); } /* Extract instance number */ - if (isdigit((int)filename[ACPI_NAME_SIZE])) { - sscanf(&filename[ACPI_NAME_SIZE], "%u", instance); - } else if (strlen(filename) != ACPI_NAME_SIZE) { + if (isdigit((int)filename[ACPI_NAMESEG_SIZE])) { + sscanf(&filename[ACPI_NAMESEG_SIZE], "%u", instance); + } else if (strlen(filename) != ACPI_NAMESEG_SIZE) { return (AE_BAD_SIGNATURE); } else { *instance = 0; @@ -1174,7 +1174,7 @@ osl_table_name_from_file(char *filename, char *signature, u32 *instance) /* Extract signature */ - ACPI_MOVE_NAME(signature, filename); + ACPI_COPY_NAMESEG(signature, filename); return (AE_OK); } @@ -1236,7 +1236,7 @@ osl_read_table_from_file(char *filename, status = AE_BAD_SIGNATURE; goto exit; } - } else if (!ACPI_COMPARE_NAME(signature, header.signature)) { + } else if (!ACPI_COMPARE_NAMESEG(signature, header.signature)) { fprintf(stderr, "Incorrect signature: Expecting %4.4s, found %4.4s\n", signature, header.signature); @@ -1311,7 +1311,7 @@ osl_get_customized_table(char *pathname, { void *table_dir; u32 current_instance = 0; - char temp_name[ACPI_NAME_SIZE]; + char temp_name[ACPI_NAMESEG_SIZE]; char table_filename[PATH_MAX]; char *filename; acpi_status status; @@ -1329,7 +1329,7 @@ osl_get_customized_table(char *pathname, /* Ignore meaningless files */ - if (!ACPI_COMPARE_NAME(filename, signature)) { + if (!ACPI_COMPARE_NAMESEG(filename, signature)) { continue; } diff --git a/tools/power/acpi/tools/acpidump/apdump.c b/tools/power/acpi/tools/acpidump/apdump.c index e256c2ac5ddc..820baeb5092b 100644 --- a/tools/power/acpi/tools/acpidump/apdump.c +++ b/tools/power/acpi/tools/acpidump/apdump.c @@ -289,14 +289,14 @@ int ap_dump_table_by_address(char *ascii_address) int ap_dump_table_by_name(char *signature) { - char local_signature[ACPI_NAME_SIZE + 1]; + char local_signature[ACPI_NAMESEG_SIZE + 1]; u32 instance; struct acpi_table_header *table; acpi_physical_address address; acpi_status status; int table_status; - if (strlen(signature) != ACPI_NAME_SIZE) { + if (strlen(signature) != ACPI_NAMESEG_SIZE) { fprintf(stderr, "Invalid table signature [%s]: must be exactly 4 characters\n", signature); @@ -310,9 +310,9 @@ int ap_dump_table_by_name(char *signature) /* To be friendly, handle tables whose signatures do not match the name */ - if (ACPI_COMPARE_NAME(local_signature, "FADT")) { + if (ACPI_COMPARE_NAMESEG(local_signature, "FADT")) { strcpy(local_signature, ACPI_SIG_FADT); - } else if (ACPI_COMPARE_NAME(local_signature, "MADT")) { + } else if (ACPI_COMPARE_NAMESEG(local_signature, "MADT")) { strcpy(local_signature, ACPI_SIG_MADT); } diff --git a/tools/power/acpi/tools/acpidump/apfiles.c b/tools/power/acpi/tools/acpidump/apfiles.c index 49972bc78bc5..a42cfcaa3293 100644 --- a/tools/power/acpi/tools/acpidump/apfiles.c +++ b/tools/power/acpi/tools/acpidump/apfiles.c @@ -97,7 +97,7 @@ int ap_open_output_file(char *pathname) int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance) { - char filename[ACPI_NAME_SIZE + 16]; + char filename[ACPI_NAMESEG_SIZE + 16]; char instance_str[16]; ACPI_FILE file; acpi_size actual; @@ -110,16 +110,16 @@ int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance) /* Construct lower-case filename from the table local signature */ if (ACPI_VALIDATE_RSDP_SIG(table->signature)) { - ACPI_MOVE_NAME(filename, ACPI_RSDP_NAME); + ACPI_COPY_NAMESEG(filename, ACPI_RSDP_NAME); } else { - ACPI_MOVE_NAME(filename, table->signature); + ACPI_COPY_NAMESEG(filename, table->signature); } filename[0] = (char)tolower((int)filename[0]); filename[1] = (char)tolower((int)filename[1]); filename[2] = (char)tolower((int)filename[2]); filename[3] = (char)tolower((int)filename[3]); - filename[ACPI_NAME_SIZE] = 0; + filename[ACPI_NAMESEG_SIZE] = 0; /* Handle multiple SSDts - create different filenames for each */ diff --git a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c index 6ff8383f2941..e364b170bf85 100644 --- a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c +++ b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * test module to check whether the TSC-based delay routine continues * to work properly after cpufreq transitions. Needs ACPI to work diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile index 1598b4fa0b11..045f5f7d68ab 100644 --- a/tools/power/x86/turbostat/Makefile +++ b/tools/power/x86/turbostat/Makefile @@ -9,7 +9,7 @@ ifeq ("$(origin O)", "command line") endif turbostat : turbostat.c -override CFLAGS += -Wall +override CFLAGS += -Wall -I../../../include override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' override CFLAGS += -DINTEL_FAMILY_HEADER='"../../../../arch/x86/include/asm/intel-family.h"' diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index c3fad065c89c..c7727be9719f 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -44,6 +44,7 @@ #include <cpuid.h> #include <linux/capability.h> #include <errno.h> +#include <math.h> char *proc_stat = "/proc/stat"; FILE *outf; @@ -63,7 +64,6 @@ unsigned int dump_only; unsigned int do_snb_cstates; unsigned int do_knl_cstates; unsigned int do_slm_cstates; -unsigned int do_cnl_cstates; unsigned int use_c1_residency_msr; unsigned int has_aperf; unsigned int has_epb; @@ -141,9 +141,21 @@ unsigned int first_counter_read = 1; #define RAPL_CORES_ENERGY_STATUS (1 << 9) /* 0x639 MSR_PP0_ENERGY_STATUS */ +#define RAPL_PER_CORE_ENERGY (1 << 10) + /* Indicates cores energy collection is per-core, + * not per-package. */ +#define RAPL_AMD_F17H (1 << 11) + /* 0xc0010299 MSR_RAPL_PWR_UNIT */ + /* 0xc001029a MSR_CORE_ENERGY_STAT */ + /* 0xc001029b MSR_PKG_ENERGY_STAT */ #define RAPL_CORES (RAPL_CORES_ENERGY_STATUS | RAPL_CORES_POWER_LIMIT) #define TJMAX_DEFAULT 100 +/* MSRs that are not yet in the kernel-provided header. */ +#define MSR_RAPL_PWR_UNIT 0xc0010299 +#define MSR_CORE_ENERGY_STAT 0xc001029a +#define MSR_PKG_ENERGY_STAT 0xc001029b + #define MAX(a, b) ((a) > (b) ? (a) : (b)) /* @@ -187,6 +199,7 @@ struct core_data { unsigned long long c7; unsigned long long mc6_us; /* duplicate as per-core for now, even though per module */ unsigned int core_temp_c; + unsigned int core_energy; /* MSR_CORE_ENERGY_STAT */ unsigned int core_id; unsigned long long counter[MAX_ADDED_COUNTERS]; } *core_even, *core_odd; @@ -273,6 +286,7 @@ struct system_summary { struct cpu_topology { int physical_package_id; + int die_id; int logical_cpu_id; int physical_node_id; int logical_node_id; /* 0-based count within the package */ @@ -283,6 +297,7 @@ struct cpu_topology { struct topo_params { int num_packages; + int num_die; int num_cpus; int num_cores; int max_cpu_num; @@ -314,9 +329,8 @@ int for_all_cpus(int (func)(struct thread_data *, struct core_data *, struct pkg int retval, pkg_no, core_no, thread_no, node_no; for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) { - for (core_no = 0; core_no < topo.cores_per_node; ++core_no) { - for (node_no = 0; node_no < topo.nodes_per_pkg; - node_no++) { + for (node_no = 0; node_no < topo.nodes_per_pkg; node_no++) { + for (core_no = 0; core_no < topo.cores_per_node; ++core_no) { for (thread_no = 0; thread_no < topo.threads_per_core; ++thread_no) { struct thread_data *t; @@ -442,6 +456,7 @@ struct msr_counter bic[] = { { 0x0, "CPU" }, { 0x0, "APIC" }, { 0x0, "X2APIC" }, + { 0x0, "Die" }, }; #define MAX_BIC (sizeof(bic) / sizeof(struct msr_counter)) @@ -495,6 +510,7 @@ struct msr_counter bic[] = { #define BIC_CPU (1ULL << 47) #define BIC_APIC (1ULL << 48) #define BIC_X2APIC (1ULL << 49) +#define BIC_Die (1ULL << 50) #define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC) @@ -621,6 +637,8 @@ void print_header(char *delim) outp += sprintf(outp, "%sTime_Of_Day_Seconds", (printed++ ? delim : "")); if (DO_BIC(BIC_Package)) outp += sprintf(outp, "%sPackage", (printed++ ? delim : "")); + if (DO_BIC(BIC_Die)) + outp += sprintf(outp, "%sDie", (printed++ ? delim : "")); if (DO_BIC(BIC_Node)) outp += sprintf(outp, "%sNode", (printed++ ? delim : "")); if (DO_BIC(BIC_Core)) @@ -667,7 +685,7 @@ void print_header(char *delim) if (DO_BIC(BIC_CPU_c1)) outp += sprintf(outp, "%sCPU%%c1", (printed++ ? delim : "")); - if (DO_BIC(BIC_CPU_c3) && !do_slm_cstates && !do_knl_cstates && !do_cnl_cstates) + if (DO_BIC(BIC_CPU_c3)) outp += sprintf(outp, "%sCPU%%c3", (printed++ ? delim : "")); if (DO_BIC(BIC_CPU_c6)) outp += sprintf(outp, "%sCPU%%c6", (printed++ ? delim : "")); @@ -680,6 +698,14 @@ void print_header(char *delim) if (DO_BIC(BIC_CoreTmp)) outp += sprintf(outp, "%sCoreTmp", (printed++ ? delim : "")); + if (do_rapl && !rapl_joules) { + if (DO_BIC(BIC_CorWatt) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); + } else if (do_rapl && rapl_joules) { + if (DO_BIC(BIC_Cor_J) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); + } + for (mp = sys.cp; mp; mp = mp->next) { if (mp->format == FORMAT_RAW) { if (mp->width == 64) @@ -734,7 +760,7 @@ void print_header(char *delim) if (do_rapl && !rapl_joules) { if (DO_BIC(BIC_PkgWatt)) outp += sprintf(outp, "%sPkgWatt", (printed++ ? delim : "")); - if (DO_BIC(BIC_CorWatt)) + if (DO_BIC(BIC_CorWatt) && !(do_rapl & RAPL_PER_CORE_ENERGY)) outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); if (DO_BIC(BIC_GFXWatt)) outp += sprintf(outp, "%sGFXWatt", (printed++ ? delim : "")); @@ -747,7 +773,7 @@ void print_header(char *delim) } else if (do_rapl && rapl_joules) { if (DO_BIC(BIC_Pkg_J)) outp += sprintf(outp, "%sPkg_J", (printed++ ? delim : "")); - if (DO_BIC(BIC_Cor_J)) + if (DO_BIC(BIC_Cor_J) && !(do_rapl & RAPL_PER_CORE_ENERGY)) outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); if (DO_BIC(BIC_GFX_J)) outp += sprintf(outp, "%sGFX_J", (printed++ ? delim : "")); @@ -808,6 +834,7 @@ int dump_counters(struct thread_data *t, struct core_data *c, outp += sprintf(outp, "c6: %016llX\n", c->c6); outp += sprintf(outp, "c7: %016llX\n", c->c7); outp += sprintf(outp, "DTS: %dC\n", c->core_temp_c); + outp += sprintf(outp, "Joules: %0X\n", c->core_energy); for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { outp += sprintf(outp, "cADDED [%d] msr0x%x: %08llX\n", @@ -904,6 +931,8 @@ int format_counters(struct thread_data *t, struct core_data *c, if (t == &average.threads) { if (DO_BIC(BIC_Package)) outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_Die)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); if (DO_BIC(BIC_Node)) outp += sprintf(outp, "%s-", (printed++ ? delim : "")); if (DO_BIC(BIC_Core)) @@ -921,6 +950,12 @@ int format_counters(struct thread_data *t, struct core_data *c, else outp += sprintf(outp, "%s-", (printed++ ? delim : "")); } + if (DO_BIC(BIC_Die)) { + if (c) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), cpus[t->cpu_id].die_id); + else + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + } if (DO_BIC(BIC_Node)) { if (t) outp += sprintf(outp, "%s%d", @@ -1003,7 +1038,7 @@ int format_counters(struct thread_data *t, struct core_data *c, if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) goto done; - if (DO_BIC(BIC_CPU_c3) && !do_slm_cstates && !do_knl_cstates && !do_cnl_cstates) + if (DO_BIC(BIC_CPU_c3)) outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c3/tsc); if (DO_BIC(BIC_CPU_c6)) outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c6/tsc); @@ -1033,6 +1068,20 @@ int format_counters(struct thread_data *t, struct core_data *c, } } + /* + * If measurement interval exceeds minimum RAPL Joule Counter range, + * indicate that results are suspect by printing "**" in fraction place. + */ + if (interval_float < rapl_joule_counter_range) + fmt8 = "%s%.2f"; + else + fmt8 = "%6.0f**"; + + if (DO_BIC(BIC_CorWatt) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units / interval_float); + if (DO_BIC(BIC_Cor_J) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units); + /* print per-package data only for 1st core in package */ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) goto done; @@ -1085,18 +1134,9 @@ int format_counters(struct thread_data *t, struct core_data *c, if (DO_BIC(BIC_SYS_LPI)) outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->sys_lpi / 1000000.0 / interval_float); - /* - * If measurement interval exceeds minimum RAPL Joule Counter range, - * indicate that results are suspect by printing "**" in fraction place. - */ - if (interval_float < rapl_joule_counter_range) - fmt8 = "%s%.2f"; - else - fmt8 = "%6.0f**"; - if (DO_BIC(BIC_PkgWatt)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units / interval_float); - if (DO_BIC(BIC_CorWatt)) + if (DO_BIC(BIC_CorWatt) && !(do_rapl & RAPL_PER_CORE_ENERGY)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units / interval_float); if (DO_BIC(BIC_GFXWatt)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units / interval_float); @@ -1104,7 +1144,7 @@ int format_counters(struct thread_data *t, struct core_data *c, outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_dram * rapl_dram_energy_units / interval_float); if (DO_BIC(BIC_Pkg_J)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units); - if (DO_BIC(BIC_Cor_J)) + if (DO_BIC(BIC_Cor_J) && !(do_rapl & RAPL_PER_CORE_ENERGY)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units); if (DO_BIC(BIC_GFX_J)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units); @@ -1249,6 +1289,8 @@ delta_core(struct core_data *new, struct core_data *old) old->core_temp_c = new->core_temp_c; old->mc6_us = new->mc6_us - old->mc6_us; + DELTA_WRAP32(new->core_energy, old->core_energy); + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { if (mp->format == FORMAT_RAW) old->counter[i] = new->counter[i]; @@ -1391,6 +1433,7 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data c->c7 = 0; c->mc6_us = 0; c->core_temp_c = 0; + c->core_energy = 0; p->pkg_wtd_core_c0 = 0; p->pkg_any_core_c0 = 0; @@ -1473,6 +1516,8 @@ int sum_counters(struct thread_data *t, struct core_data *c, average.cores.core_temp_c = MAX(average.cores.core_temp_c, c->core_temp_c); + average.cores.core_energy += c->core_energy; + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { if (mp->format == FORMAT_RAW) continue; @@ -1818,7 +1863,7 @@ retry: if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) goto done; - if (DO_BIC(BIC_CPU_c3) && !do_slm_cstates && !do_knl_cstates && !do_cnl_cstates) { + if (DO_BIC(BIC_CPU_c3)) { if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3)) return -6; } @@ -1845,6 +1890,12 @@ retry: c->core_temp_c = tcc_activation_temp - ((msr >> 16) & 0x7F); } + if (do_rapl & RAPL_AMD_F17H) { + if (get_msr(cpu, MSR_CORE_ENERGY_STAT, &msr)) + return -14; + c->core_energy = msr & 0xFFFFFFFF; + } + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { if (get_mp(cpu, mp, &c->counter[i])) return -10; @@ -1934,6 +1985,11 @@ retry: return -16; p->rapl_dram_perf_status = msr & 0xFFFFFFFF; } + if (do_rapl & RAPL_AMD_F17H) { + if (get_msr(cpu, MSR_PKG_ENERGY_STAT, &msr)) + return -13; + p->energy_pkg = msr & 0xFFFFFFFF; + } if (DO_BIC(BIC_PkgTmp)) { if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) return -17; @@ -2456,6 +2512,8 @@ void free_all_buffers(void) /* * Parse a file containing a single int. + * Return 0 if file can not be opened + * Exit if file can be opened, but can not be parsed */ int parse_int_file(const char *fmt, ...) { @@ -2467,7 +2525,9 @@ int parse_int_file(const char *fmt, ...) va_start(args, fmt); vsnprintf(path, sizeof(path), fmt, args); va_end(args); - filep = fopen_or_die(path, "r"); + filep = fopen(path, "r"); + if (!filep) + return 0; if (fscanf(filep, "%d", &value) != 1) err(1, "%s: failed to parse number from file", path); fclose(filep); @@ -2488,6 +2548,11 @@ int get_physical_package_id(int cpu) return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/physical_package_id", cpu); } +int get_die_id(int cpu) +{ + return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/die_id", cpu); +} + int get_core_id(int cpu) { return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/core_id", cpu); @@ -2578,7 +2643,8 @@ int get_thread_siblings(struct cpu_topology *thiscpu) filep = fopen_or_die(path, "r"); do { offset -= BITMASK_SIZE; - fscanf(filep, "%lx%c", &map, &character); + if (fscanf(filep, "%lx%c", &map, &character) != 2) + err(1, "%s: failed to parse file", path); for (shift = 0; shift < BITMASK_SIZE; shift++) { if ((map >> shift) & 0x1) { so = shift + offset; @@ -2855,8 +2921,11 @@ int snapshot_cpu_lpi_us(void) fp = fopen_or_die("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", "r"); retval = fscanf(fp, "%lld", &cpuidle_cur_cpu_lpi_us); - if (retval != 1) - err(1, "CPU LPI"); + if (retval != 1) { + fprintf(stderr, "Disabling Low Power Idle CPU output\n"); + BIC_NOT_PRESENT(BIC_CPU_LPI); + return -1; + } fclose(fp); @@ -2878,9 +2947,11 @@ int snapshot_sys_lpi_us(void) fp = fopen_or_die("/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us", "r"); retval = fscanf(fp, "%lld", &cpuidle_cur_sys_lpi_us); - if (retval != 1) - err(1, "SYS LPI"); - + if (retval != 1) { + fprintf(stderr, "Disabling Low Power Idle System output\n"); + BIC_NOT_PRESENT(BIC_SYS_LPI); + return -1; + } fclose(fp); return 0; @@ -3410,14 +3481,14 @@ dump_sysfs_cstate_config(void) input = fopen(path, "r"); if (input == NULL) continue; - fgets(name_buf, sizeof(name_buf), input); + if (!fgets(name_buf, sizeof(name_buf), input)) + err(1, "%s: failed to read file", path); /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ sp = strchr(name_buf, '-'); if (!sp) sp = strchrnul(name_buf, '\n'); *sp = '\0'; - fclose(input); sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/desc", @@ -3425,7 +3496,8 @@ dump_sysfs_cstate_config(void) input = fopen(path, "r"); if (input == NULL) continue; - fgets(desc, sizeof(desc), input); + if (!fgets(desc, sizeof(desc), input)) + err(1, "%s: failed to read file", path); fprintf(outf, "cpu%d: %s: %s", base_cpu, name_buf, desc); fclose(input); @@ -3444,20 +3516,22 @@ dump_sysfs_pstate_config(void) base_cpu); input = fopen(path, "r"); if (input == NULL) { - fprintf(stderr, "NSFOD %s\n", path); + fprintf(outf, "NSFOD %s\n", path); return; } - fgets(driver_buf, sizeof(driver_buf), input); + if (!fgets(driver_buf, sizeof(driver_buf), input)) + err(1, "%s: failed to read file", path); fclose(input); sprintf(path, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor", base_cpu); input = fopen(path, "r"); if (input == NULL) { - fprintf(stderr, "NSFOD %s\n", path); + fprintf(outf, "NSFOD %s\n", path); return; } - fgets(governor_buf, sizeof(governor_buf), input); + if (!fgets(governor_buf, sizeof(governor_buf), input)) + err(1, "%s: failed to read file", path); fclose(input); fprintf(outf, "cpu%d: cpufreq driver: %s", base_cpu, driver_buf); @@ -3466,7 +3540,8 @@ dump_sysfs_pstate_config(void) sprintf(path, "/sys/devices/system/cpu/cpufreq/boost"); input = fopen(path, "r"); if (input != NULL) { - fscanf(input, "%d", &turbo); + if (fscanf(input, "%d", &turbo) != 1) + err(1, "%s: failed to parse number from file", path); fprintf(outf, "cpufreq boost: %d\n", turbo); fclose(input); } @@ -3474,7 +3549,8 @@ dump_sysfs_pstate_config(void) sprintf(path, "/sys/devices/system/cpu/intel_pstate/no_turbo"); input = fopen(path, "r"); if (input != NULL) { - fscanf(input, "%d", &turbo); + if (fscanf(input, "%d", &turbo) != 1) + err(1, "%s: failed to parse number from file", path); fprintf(outf, "cpufreq intel_pstate no_turbo: %d\n", turbo); fclose(input); } @@ -3718,7 +3794,7 @@ int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data #define RAPL_POWER_GRANULARITY 0x7FFF /* 15 bit power granularity */ #define RAPL_TIME_GRANULARITY 0x3F /* 6 bit time granularity */ -double get_tdp(unsigned int model) +double get_tdp_intel(unsigned int model) { unsigned long long msr; @@ -3735,6 +3811,16 @@ double get_tdp(unsigned int model) } } +double get_tdp_amd(unsigned int family) +{ + switch (family) { + case 0x17: + default: + /* This is the max stock TDP of HEDT/Server Fam17h chips */ + return 250.0; + } +} + /* * rapl_dram_energy_units_probe() * Energy units are either hard-coded, or come from RAPL Energy Unit MSR. @@ -3754,21 +3840,12 @@ rapl_dram_energy_units_probe(int model, double rapl_energy_units) } } - -/* - * rapl_probe() - * - * sets do_rapl, rapl_power_units, rapl_energy_units, rapl_time_units - */ -void rapl_probe(unsigned int family, unsigned int model) +void rapl_probe_intel(unsigned int family, unsigned int model) { unsigned long long msr; unsigned int time_unit; double tdp; - if (!genuine_intel) - return; - if (family != 6) return; @@ -3892,13 +3969,69 @@ void rapl_probe(unsigned int family, unsigned int model) rapl_time_units = 1.0 / (1 << (time_unit)); - tdp = get_tdp(model); + tdp = get_tdp_intel(model); rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; if (!quiet) fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp); +} - return; +void rapl_probe_amd(unsigned int family, unsigned int model) +{ + unsigned long long msr; + unsigned int eax, ebx, ecx, edx; + unsigned int has_rapl = 0; + double tdp; + + if (max_extended_level >= 0x80000007) { + __cpuid(0x80000007, eax, ebx, ecx, edx); + /* RAPL (Fam 17h) */ + has_rapl = edx & (1 << 14); + } + + if (!has_rapl) + return; + + switch (family) { + case 0x17: /* Zen, Zen+ */ + do_rapl = RAPL_AMD_F17H | RAPL_PER_CORE_ENERGY; + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + } + break; + default: + return; + } + + if (get_msr(base_cpu, MSR_RAPL_PWR_UNIT, &msr)) + return; + + rapl_time_units = ldexp(1.0, -(msr >> 16 & 0xf)); + rapl_energy_units = ldexp(1.0, -(msr >> 8 & 0x1f)); + rapl_power_units = ldexp(1.0, -(msr & 0xf)); + + tdp = get_tdp_amd(model); + + rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; + if (!quiet) + fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp); +} + +/* + * rapl_probe() + * + * sets do_rapl, rapl_power_units, rapl_energy_units, rapl_time_units + */ +void rapl_probe(unsigned int family, unsigned int model) +{ + if (genuine_intel) + rapl_probe_intel(family, model); + if (authentic_amd) + rapl_probe_amd(family, model); } void perf_limit_reasons_probe(unsigned int family, unsigned int model) @@ -4003,6 +4136,7 @@ void print_power_limit_msr(int cpu, unsigned long long msr, char *label) int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) { unsigned long long msr; + const char *msr_name; int cpu; if (!do_rapl) @@ -4018,10 +4152,17 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) return -1; } - if (get_msr(cpu, MSR_RAPL_POWER_UNIT, &msr)) - return -1; + if (do_rapl & RAPL_AMD_F17H) { + msr_name = "MSR_RAPL_PWR_UNIT"; + if (get_msr(cpu, MSR_RAPL_PWR_UNIT, &msr)) + return -1; + } else { + msr_name = "MSR_RAPL_POWER_UNIT"; + if (get_msr(cpu, MSR_RAPL_POWER_UNIT, &msr)) + return -1; + } - fprintf(outf, "cpu%d: MSR_RAPL_POWER_UNIT: 0x%08llx (%f Watts, %f Joules, %f sec.)\n", cpu, msr, + fprintf(outf, "cpu%d: %s: 0x%08llx (%f Watts, %f Joules, %f sec.)\n", cpu, msr_name, msr, rapl_power_units, rapl_energy_units, rapl_time_units); if (do_rapl & RAPL_PKG_POWER_INFO) { @@ -4451,6 +4592,9 @@ unsigned int intel_model_duplicates(unsigned int model) case INTEL_FAM6_KABYLAKE_MOBILE: case INTEL_FAM6_KABYLAKE_DESKTOP: return INTEL_FAM6_SKYLAKE_MOBILE; + + case INTEL_FAM6_ICELAKE_MOBILE: + return INTEL_FAM6_CANNONLAKE_MOBILE; } return model; } @@ -4702,7 +4846,9 @@ void process_cpuid() } do_slm_cstates = is_slm(family, model); do_knl_cstates = is_knl(family, model); - do_cnl_cstates = is_cnl(family, model); + + if (do_slm_cstates || do_knl_cstates || is_cnl(family, model)) + BIC_NOT_PRESENT(BIC_CPU_c3); if (!quiet) decode_misc_pwr_mgmt_msr(); @@ -4769,6 +4915,7 @@ void topology_probe() int i; int max_core_id = 0; int max_package_id = 0; + int max_die_id = 0; int max_siblings = 0; /* Initialize num_cpus, max_cpu_num */ @@ -4835,6 +4982,11 @@ void topology_probe() if (cpus[i].physical_package_id > max_package_id) max_package_id = cpus[i].physical_package_id; + /* get die information */ + cpus[i].die_id = get_die_id(i); + if (cpus[i].die_id > max_die_id) + max_die_id = cpus[i].die_id; + /* get numa node information */ cpus[i].physical_node_id = get_physical_node_id(&cpus[i]); if (cpus[i].physical_node_id > topo.max_node_num) @@ -4860,6 +5012,13 @@ void topology_probe() if (!summary_only && topo.cores_per_node > 1) BIC_PRESENT(BIC_Core); + topo.num_die = max_die_id + 1; + if (debug > 1) + fprintf(outf, "max_die_id %d, sizing for %d die\n", + max_die_id, topo.num_die); + if (!summary_only && topo.num_die > 1) + BIC_PRESENT(BIC_Die); + topo.num_packages = max_package_id + 1; if (debug > 1) fprintf(outf, "max_package_id %d, sizing for %d packages\n", @@ -4884,8 +5043,8 @@ void topology_probe() if (cpu_is_not_present(i)) continue; fprintf(outf, - "cpu %d pkg %d node %d lnode %d core %d thread %d\n", - i, cpus[i].physical_package_id, + "cpu %d pkg %d die %d node %d lnode %d core %d thread %d\n", + i, cpus[i].physical_package_id, cpus[i].die_id, cpus[i].physical_node_id, cpus[i].logical_node_id, cpus[i].physical_core_id, @@ -5122,7 +5281,7 @@ int get_and_dump_counters(void) } void print_version() { - fprintf(outf, "turbostat version 18.07.27" + fprintf(outf, "turbostat version 19.03.20" " - Len Brown <lenb@kernel.org>\n"); } @@ -5319,7 +5478,8 @@ void probe_sysfs(void) input = fopen(path, "r"); if (input == NULL) continue; - fgets(name_buf, sizeof(name_buf), input); + if (!fgets(name_buf, sizeof(name_buf), input)) + err(1, "%s: failed to read file", path); /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ sp = strchr(name_buf, '-'); @@ -5346,7 +5506,8 @@ void probe_sysfs(void) input = fopen(path, "r"); if (input == NULL) continue; - fgets(name_buf, sizeof(name_buf), input); + if (!fgets(name_buf, sizeof(name_buf), input)) + err(1, "%s: failed to read file", path); /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ sp = strchr(name_buf, '-'); if (!sp) diff --git a/tools/power/x86/x86_energy_perf_policy/Makefile b/tools/power/x86/x86_energy_perf_policy/Makefile index ae7a0e09b722..1fdeef864e7c 100644 --- a/tools/power/x86/x86_energy_perf_policy/Makefile +++ b/tools/power/x86/x86_energy_perf_policy/Makefile @@ -9,7 +9,7 @@ ifeq ("$(origin O)", "command line") endif x86_energy_perf_policy : x86_energy_perf_policy.c -override CFLAGS += -Wall +override CFLAGS += -Wall -I../../../include override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' %: %.c diff --git a/tools/spi/Makefile b/tools/spi/Makefile index 815d15589177..5c342e655e55 100644 --- a/tools/spi/Makefile +++ b/tools/spi/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only include ../scripts/Makefile.include bindir ?= /usr/bin diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 87af8a68ab25..4711f57e809a 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -58,11 +58,13 @@ my %default = ( "SCP_TO_TARGET" => "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE", "SCP_TO_TARGET_INSTALL" => "\${SCP_TO_TARGET}", "REBOOT" => "ssh \$SSH_USER\@\$MACHINE reboot", + "REBOOT_RETURN_CODE" => 255, "STOP_AFTER_SUCCESS" => 10, "STOP_AFTER_FAILURE" => 60, "STOP_TEST_AFTER" => 600, "MAX_MONITOR_WAIT" => 1800, "GRUB_REBOOT" => "grub2-reboot", + "GRUB_BLS_GET" => "grubby --info=ALL", "SYSLINUX" => "extlinux", "SYSLINUX_PATH" => "/boot/extlinux", "CONNECT_TIMEOUT" => 25, @@ -105,6 +107,7 @@ my $reboot_type; my $reboot_script; my $power_cycle; my $reboot; +my $reboot_return_code; my $reboot_on_error; my $switch_to_good; my $switch_to_test; @@ -123,6 +126,7 @@ my $last_grub_menu; my $grub_file; my $grub_number; my $grub_reboot; +my $grub_bls_get; my $syslinux; my $syslinux_path; my $syslinux_label; @@ -278,6 +282,7 @@ my %option_map = ( "POST_BUILD_DIE" => \$post_build_die, "POWER_CYCLE" => \$power_cycle, "REBOOT" => \$reboot, + "REBOOT_RETURN_CODE" => \$reboot_return_code, "BUILD_NOCLEAN" => \$noclean, "MIN_CONFIG" => \$minconfig, "OUTPUT_MIN_CONFIG" => \$output_minconfig, @@ -292,6 +297,7 @@ my %option_map = ( "GRUB_MENU" => \$grub_menu, "GRUB_FILE" => \$grub_file, "GRUB_REBOOT" => \$grub_reboot, + "GRUB_BLS_GET" => \$grub_bls_get, "SYSLINUX" => \$syslinux, "SYSLINUX_PATH" => \$syslinux_path, "SYSLINUX_LABEL" => \$syslinux_label, @@ -437,7 +443,7 @@ EOF ; $config_help{"REBOOT_TYPE"} = << "EOF" Way to reboot the box to the test kernel. - Only valid options so far are "grub", "grub2", "syslinux", and "script". + Only valid options so far are "grub", "grub2", "grub2bls", "syslinux", and "script". If you specify grub, it will assume grub version 1 and will search in /boot/grub/menu.lst for the title \$GRUB_MENU @@ -451,6 +457,8 @@ $config_help{"REBOOT_TYPE"} = << "EOF" If you specify grub2, then you also need to specify both \$GRUB_MENU and \$GRUB_FILE. + If you specify grub2bls, then you also need to specify \$GRUB_MENU. + If you specify syslinux, then you may use SYSLINUX to define the syslinux command (defaults to extlinux), and SYSLINUX_PATH to specify the path to the syslinux install (defaults to /boot/extlinux). But you have to specify @@ -476,6 +484,9 @@ $config_help{"GRUB_MENU"} = << "EOF" menu must be a non-nested menu. Add the quotes used in the menu to guarantee your selection, as the first menuentry with the content of \$GRUB_MENU that is found will be used. + + For grub2bls, \$GRUB_MENU is searched on the result of \$GRUB_BLS_GET + command for the lines that begin with "title". EOF ; $config_help{"GRUB_FILE"} = << "EOF" @@ -692,7 +703,7 @@ sub get_mandatory_configs { } } - if ($rtype eq "grub") { + if (($rtype eq "grub") or ($rtype eq "grub2bls")) { get_mandatory_config("GRUB_MENU"); } @@ -1437,16 +1448,27 @@ sub do_not_reboot { my $in_die = 0; +sub get_test_name() { + my $name; + + if (defined($test_name)) { + $name = "$test_name:$test_type"; + } else { + $name = $test_type; + } + return $name; +} + sub dodie { # avoid recusion return if ($in_die); $in_die = 1; - doprint "CRITICAL FAILURE... ", @_, "\n"; - my $i = $iteration; + doprint "CRITICAL FAILURE... [TEST $i] ", @_, "\n"; + if ($reboot_on_error && !do_not_reboot) { doprint "REBOOTING\n"; @@ -1462,7 +1484,8 @@ sub dodie { } if ($email_on_error) { - send_email("KTEST: critical failure for your [$test_type] test", + my $name = get_test_name; + send_email("KTEST: critical failure for test $i [$name]", "Your test started at $script_start_time has failed with:\n@_\n"); } @@ -1737,6 +1760,7 @@ sub run_command { my $dord = 0; my $dostdout = 0; my $pid; + my $command_orig = $command; $command =~ s/\$SSH_USER/$ssh_user/g; $command =~ s/\$MACHINE/$machine/g; @@ -1791,6 +1815,11 @@ sub run_command { # shift 8 for real exit status $run_command_status = $? >> 8; + if ($command_orig eq $default{REBOOT} && + $run_command_status == $reboot_return_code) { + $run_command_status = 0; + } + close(CMD); close(LOG) if ($dolog); close(RD) if ($dord); @@ -1850,35 +1879,37 @@ sub run_scp_mod { return run_scp($src, $dst, $cp_scp); } -sub get_grub2_index { +sub _get_grub_index { + + my ($command, $target, $skip) = @_; return if (defined($grub_number) && defined($last_grub_menu) && $last_grub_menu eq $grub_menu && defined($last_machine) && $last_machine eq $machine); - doprint "Find grub2 menu ... "; + doprint "Find $reboot_type menu ... "; $grub_number = -1; my $ssh_grub = $ssh_exec; - $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g; + $ssh_grub =~ s,\$SSH_COMMAND,$command,g; open(IN, "$ssh_grub |") - or dodie "unable to get $grub_file"; + or dodie "unable to execute $command"; my $found = 0; while (<IN>) { - if (/^menuentry.*$grub_menu/) { + if (/$target/) { $grub_number++; $found = 1; last; - } elsif (/^menuentry\s|^submenu\s/) { + } elsif (/$skip/) { $grub_number++; } } close(IN); - dodie "Could not find '$grub_menu' in $grub_file on $machine" + dodie "Could not find '$grub_menu' through $command on $machine" if (!$found); doprint "$grub_number\n"; $last_grub_menu = $grub_menu; @@ -1887,45 +1918,34 @@ sub get_grub2_index { sub get_grub_index { - if ($reboot_type eq "grub2") { - get_grub2_index; - return; - } + my $command; + my $target; + my $skip; + my $grub_menu_qt; - if ($reboot_type ne "grub") { + if ($reboot_type !~ /^grub/) { return; } - return if (defined($grub_number) && defined($last_grub_menu) && - $last_grub_menu eq $grub_menu && defined($last_machine) && - $last_machine eq $machine); - doprint "Find grub menu ... "; - $grub_number = -1; - - my $ssh_grub = $ssh_exec; - $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g; + $grub_menu_qt = quotemeta($grub_menu); - open(IN, "$ssh_grub |") - or dodie "unable to get menu.lst"; - - my $found = 0; - - while (<IN>) { - if (/^\s*title\s+$grub_menu\s*$/) { - $grub_number++; - $found = 1; - last; - } elsif (/^\s*title\s/) { - $grub_number++; - } + if ($reboot_type eq "grub") { + $command = "cat /boot/grub/menu.lst"; + $target = '^\s*title\s+' . $grub_menu_qt . '\s*$'; + $skip = '^\s*title\s'; + } elsif ($reboot_type eq "grub2") { + $command = "cat $grub_file"; + $target = '^menuentry.*' . $grub_menu_qt; + $skip = '^menuentry\s|^submenu\s'; + } elsif ($reboot_type eq "grub2bls") { + $command = $grub_bls_get; + $target = '^title=.*' . $grub_menu_qt; + $skip = '^title='; + } else { + return; } - close(IN); - dodie "Could not find '$grub_menu' in /boot/grub/menu on $machine" - if (!$found); - doprint "$grub_number\n"; - $last_grub_menu = $grub_menu; - $last_machine = $machine; + _get_grub_index($command, $target, $skip); } sub wait_for_input @@ -4193,7 +4213,8 @@ sub send_email { sub cancel_test { if ($email_when_canceled) { - send_email("KTEST: Your [$test_type] test was cancelled", + my $name = get_test_name; + send_email("KTEST: Your [$name] test was cancelled", "Your test started at $script_start_time was cancelled: sig int"); } die "\nCaught Sig Int, test interrupted: $!\n" @@ -4247,7 +4268,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { run_command $pre_ktest; } if ($email_when_started) { - send_email("KTEST: Your [$test_type] test was started", + my $name = get_test_name; + send_email("KTEST: Your [$name] test was started", "Your test was started on $script_start_time"); } } @@ -4278,7 +4300,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { if (!$buildonly) { $target = "$ssh_user\@$machine"; - if ($reboot_type eq "grub") { + if (($reboot_type eq "grub") or ($reboot_type eq "grub2bls")) { dodie "GRUB_MENU not defined" if (!defined($grub_menu)); } elsif ($reboot_type eq "grub2") { dodie "GRUB_MENU not defined" if (!defined($grub_menu)); @@ -4398,7 +4420,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { } if (defined($final_post_ktest)) { - run_command $final_post_ktest; + + my $cp_final_post_ktest = eval_kernel_version $final_post_ktest; + run_command $cp_final_post_ktest; } if ($opt{"POWEROFF_ON_SUCCESS"}) { @@ -4414,7 +4438,7 @@ if ($opt{"POWEROFF_ON_SUCCESS"}) { doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n"; if ($email_when_finished) { - send_email("KTEST: Your [$test_type] test has finished!", + send_email("KTEST: Your test has finished!", "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!"); } exit 0; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 6ca6ca0ce695..c3bc933d437b 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -349,13 +349,13 @@ # option to boot to with GRUB_REBOOT #GRUB_FILE = /boot/grub2/grub.cfg -# The tool for REBOOT_TYPE = grub2 to set the next reboot kernel +# The tool for REBOOT_TYPE = grub2 or grub2bls to set the next reboot kernel # to boot into (one shot mode). # (default grub2_reboot) #GRUB_REBOOT = grub2_reboot # The grub title name for the test kernel to boot -# (Only mandatory if REBOOT_TYPE = grub or grub2) +# (Only mandatory if REBOOT_TYPE = grub or grub2 or grub2bls) # # Note, ktest.pl will not update the grub menu.lst, you need to # manually add an option for the test. ktest.pl will search @@ -374,6 +374,10 @@ # do a: GRUB_MENU = 'Test Kernel' # For customizing, add your entry in /etc/grub.d/40_custom. # +# For grub2bls, a search of "title"s are done. The menu is found +# by searching for the contents of GRUB_MENU in the line that starts +# with "title". +# #GRUB_MENU = Test Kernel # For REBOOT_TYPE = syslinux, the name of the syslinux executable @@ -479,6 +483,11 @@ # default (undefined) #POST_KTEST = ${SSH} ~/dismantle_test +# If you want to remove the kernel entry in Boot Loader Specification (BLS) +# environment, use kernel-install command. +# Here's the example: +#POST_KTEST = ssh root@Test "/usr/bin/kernel-install remove $KERNEL_VERSION" + # The default test type (default test) # The test types may be: # build - only build the kernel, do nothing else @@ -530,6 +539,11 @@ # or on some systems: #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION +# If you want to add the kernel entry in Boot Loader Specification (BLS) +# environment, use kernel-install command. +# Here's the example: +#POST_INSTALL = ssh root@Test "/usr/bin/kernel-install add $KERNEL_VERSION /boot/vmlinuz-$KERNEL_VERSION" + # If for some reason you just want to boot the kernel and you do not # want the test to install anything new. For example, you may just want # to boot test the same kernel over and over and do not want to go through @@ -593,6 +607,8 @@ # For REBOOT_TYPE = grub2, you must define both GRUB_MENU and # GRUB_FILE. # +# For REBOOT_TYPE = grub2bls, you must define GRUB_MENU. +# # For REBOOT_TYPE = syslinux, you must define SYSLINUX_LABEL, and # perhaps modify SYSLINUX (default extlinux) and SYSLINUX_PATH # (default /boot/extlinux) @@ -887,6 +903,10 @@ # The variables SSH_USER and MACHINE are defined. #REBOOT = ssh $SSH_USER@$MACHINE reboot +# The return code of REBOOT +# (default 255) +#REBOOT_RETURN_CODE = 255 + # The way triple faults are detected is by testing the kernel # banner. If the kernel banner for the kernel we are testing is # found, and then later a kernel banner for another kernel version diff --git a/tools/testing/nvdimm/Kbuild b/tools/testing/nvdimm/Kbuild index e1286d2cdfbf..c4a9196d794c 100644 --- a/tools/testing/nvdimm/Kbuild +++ b/tools/testing/nvdimm/Kbuild @@ -68,8 +68,11 @@ device_dax-y += device_dax_test.o device_dax-y += config_check.o dax_pmem-y := $(DAX_SRC)/pmem/pmem.o +dax_pmem-y += dax_pmem_test.o dax_pmem_core-y := $(DAX_SRC)/pmem/core.o +dax_pmem_core-y += dax_pmem_core_test.o dax_pmem_compat-y := $(DAX_SRC)/pmem/compat.o +dax_pmem_compat-y += dax_pmem_compat_test.o dax_pmem-y += config_check.o libnvdimm-y := $(NVDIMM_SRC)/core.o diff --git a/tools/testing/nvdimm/dax_pmem_compat_test.c b/tools/testing/nvdimm/dax_pmem_compat_test.c new file mode 100644 index 000000000000..7cd1877f3765 --- /dev/null +++ b/tools/testing/nvdimm/dax_pmem_compat_test.c @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2019 Intel Corporation. All rights reserved. + +#include <linux/module.h> +#include <linux/printk.h> +#include "watermark.h" + +nfit_test_watermark(dax_pmem_compat); diff --git a/tools/testing/nvdimm/dax_pmem_core_test.c b/tools/testing/nvdimm/dax_pmem_core_test.c new file mode 100644 index 000000000000..a4249cdbeec1 --- /dev/null +++ b/tools/testing/nvdimm/dax_pmem_core_test.c @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2019 Intel Corporation. All rights reserved. + +#include <linux/module.h> +#include <linux/printk.h> +#include "watermark.h" + +nfit_test_watermark(dax_pmem_core); diff --git a/tools/testing/nvdimm/dax_pmem_test.c b/tools/testing/nvdimm/dax_pmem_test.c new file mode 100644 index 000000000000..fd4c94a5aa02 --- /dev/null +++ b/tools/testing/nvdimm/dax_pmem_test.c @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2019 Intel Corporation. All rights reserved. + +#include <linux/module.h> +#include <linux/printk.h> +#include "watermark.h" + +nfit_test_watermark(dax_pmem); diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c index b579f962451d..bb4225cdf666 100644 --- a/tools/testing/nvdimm/test/nfit.c +++ b/tools/testing/nvdimm/test/nfit.c @@ -146,6 +146,7 @@ static int dimm_fail_cmd_code[ARRAY_SIZE(handle)]; struct nfit_test_sec { u8 state; u8 ext_state; + u8 old_state; u8 passphrase[32]; u8 master_passphrase[32]; u64 overwrite_end_time; @@ -225,6 +226,8 @@ static struct workqueue_struct *nfit_wq; static struct gen_pool *nfit_pool; +static const char zero_key[NVDIMM_PASSPHRASE_LEN]; + static struct nfit_test *to_nfit_test(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -1059,8 +1062,7 @@ static int nd_intel_test_cmd_secure_erase(struct nfit_test *t, struct device *dev = &t->pdev.dev; struct nfit_test_sec *sec = &dimm_sec_info[dimm]; - if (!(sec->state & ND_INTEL_SEC_STATE_ENABLED) || - (sec->state & ND_INTEL_SEC_STATE_FROZEN)) { + if (sec->state & ND_INTEL_SEC_STATE_FROZEN) { nd_cmd->status = ND_INTEL_STATUS_INVALID_STATE; dev_dbg(dev, "secure erase: wrong security state\n"); } else if (memcmp(nd_cmd->passphrase, sec->passphrase, @@ -1068,6 +1070,12 @@ static int nd_intel_test_cmd_secure_erase(struct nfit_test *t, nd_cmd->status = ND_INTEL_STATUS_INVALID_PASS; dev_dbg(dev, "secure erase: wrong passphrase\n"); } else { + if (!(sec->state & ND_INTEL_SEC_STATE_ENABLED) + && (memcmp(nd_cmd->passphrase, zero_key, + ND_INTEL_PASSPHRASE_SIZE) != 0)) { + dev_dbg(dev, "invalid zero key\n"); + return 0; + } memset(sec->passphrase, 0, ND_INTEL_PASSPHRASE_SIZE); memset(sec->master_passphrase, 0, ND_INTEL_PASSPHRASE_SIZE); sec->state = 0; @@ -1093,7 +1101,7 @@ static int nd_intel_test_cmd_overwrite(struct nfit_test *t, return 0; } - memset(sec->passphrase, 0, ND_INTEL_PASSPHRASE_SIZE); + sec->old_state = sec->state; sec->state = ND_INTEL_SEC_STATE_OVERWRITE; dev_dbg(dev, "overwrite progressing.\n"); sec->overwrite_end_time = get_jiffies_64() + 5 * HZ; @@ -1115,7 +1123,8 @@ static int nd_intel_test_cmd_query_overwrite(struct nfit_test *t, if (time_is_before_jiffies64(sec->overwrite_end_time)) { sec->overwrite_end_time = 0; - sec->state = 0; + sec->state = sec->old_state; + sec->old_state = 0; sec->ext_state = ND_INTEL_SEC_ESTATE_ENABLED; dev_dbg(dev, "overwrite is complete\n"); } else @@ -3162,6 +3171,9 @@ static __init int nfit_test_init(void) acpi_nfit_test(); device_dax_test(); mcsafe_test(); + dax_pmem_test(); + dax_pmem_core_test(); + dax_pmem_compat_test(); nfit_test_setup(nfit_test_lookup, nfit_test_evaluate_dsm); diff --git a/tools/testing/nvdimm/watermark.h b/tools/testing/nvdimm/watermark.h index ed0528757bd4..43fc4f3e7927 100644 --- a/tools/testing/nvdimm/watermark.h +++ b/tools/testing/nvdimm/watermark.h @@ -6,6 +6,9 @@ int pmem_test(void); int libnvdimm_test(void); int acpi_nfit_test(void); int device_dax_test(void); +int dax_pmem_test(void); +int dax_pmem_core_test(void); +int dax_pmem_compat_test(void); /* * dummy routine for nfit_test to validate it is linking to the properly diff --git a/tools/testing/scatterlist/Makefile b/tools/testing/scatterlist/Makefile index 933c3a6e4d77..cbb003d9305e 100644 --- a/tools/testing/scatterlist/Makefile +++ b/tools/testing/scatterlist/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -I. -I../../include -g -O2 -Wall -fsanitize=address LDFLAGS += -fsanitize=address -fsanitize=undefined TARGETS = main diff --git a/tools/testing/selftests/.gitignore b/tools/testing/selftests/.gitignore index 91750352459d..8059ce834247 100644 --- a/tools/testing/selftests/.gitignore +++ b/tools/testing/selftests/.gitignore @@ -1,4 +1,3 @@ -kselftest gpiogpio-event-mon gpiogpio-hammer gpioinclude/ diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 971fc8428117..9781ca79794a 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -15,11 +15,11 @@ TARGETS += firmware TARGETS += ftrace TARGETS += futex TARGETS += gpio -TARGETS += ima TARGETS += intel_pstate TARGETS += ipc TARGETS += ir TARGETS += kcmp +TARGETS += kexec TARGETS += kvm TARGETS += lib TARGETS += livepatch @@ -71,26 +71,68 @@ override LDFLAGS = override MAKEFLAGS = endif +# Append kselftest to KBUILD_OUTPUT to avoid cluttering +# KBUILD_OUTPUT with selftest objects and headers installed +# by selftests Makefile or lib.mk. ifneq ($(KBUILD_SRC),) override LDFLAGS = endif -BUILD := $(O) -ifndef BUILD - BUILD := $(KBUILD_OUTPUT) +ifneq ($(O),) + BUILD := $(O) +else + ifneq ($(KBUILD_OUTPUT),) + BUILD := $(KBUILD_OUTPUT)/kselftest + else + BUILD := $(shell pwd) + DEFAULT_INSTALL_HDR_PATH := 1 + endif endif -ifndef BUILD - BUILD := $(shell pwd) + +# Prepare for headers install +top_srcdir ?= ../../.. +include $(top_srcdir)/scripts/subarch.include +ARCH ?= $(SUBARCH) +export KSFT_KHDR_INSTALL_DONE := 1 +export BUILD + +# build and run gpio when output directory is the src dir. +# gpio has dependency on tools/gpio and builds tools/gpio +# objects in the src directory in all cases making the src +# repo dirty even when objects are relocated. +ifneq (1,$(DEFAULT_INSTALL_HDR_PATH)) + TMP := $(filter-out gpio, $(TARGETS)) + TARGETS := $(TMP) endif -# KSFT_TAP_LEVEL is used from KSFT framework to prevent nested TAP header -# printing from tests. Applicable to run_tests case where run_tests adds -# TAP header prior running tests and when a test program invokes another -# with system() call. Export it here to cover override RUN_TESTS defines. -export KSFT_TAP_LEVEL=`echo 1` +# set default goal to all, so make without a target runs all, even when +# all isn't the first target in the file. +.DEFAULT_GOAL := all + +# Install headers here once for all tests. KSFT_KHDR_INSTALL_DONE +# is used to avoid running headers_install from lib.mk. +# Invoke headers install with --no-builtin-rules to avoid circular +# dependency in "make kselftest" case. In this case, second level +# make inherits builtin-rules which will use the rule generate +# Makefile.o and runs into +# "Circular Makefile.o <- prepare dependency dropped." +# and headers_install fails and test compile fails. +# +# O= KBUILD_OUTPUT cases don't run into this error, since main Makefile +# invokes them as sub-makes and --no-builtin-rules is not necessary, +# but doesn't cause any failures. Keep it simple and use the same +# flags in both cases. +# Local build cases: "make kselftest", "make -C" - headers are installed +# in the default INSTALL_HDR_PATH usr/include. +khdr: +ifeq (1,$(DEFAULT_INSTALL_HDR_PATH)) + make --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install +else + make --no-builtin-rules INSTALL_HDR_PATH=$$BUILD/usr \ + ARCH=$(ARCH) -C $(top_srcdir) headers_install +endif -export BUILD -all: +all: khdr @for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ mkdir $$BUILD_TARGET -p; \ @@ -124,14 +166,22 @@ clean_hotplug: run_pstore_crash: make -C pstore run_crash -INSTALL_PATH ?= install +# Use $BUILD as the default install root. $BUILD points to the +# right output location for the following cases: +# 1. output_dir=kernel_src +# 2. a separate output directory is specified using O= KBUILD_OUTPUT +# 3. a separate output directory is specified using KBUILD_OUTPUT +# +INSTALL_PATH ?= $(BUILD)/install INSTALL_PATH := $(abspath $(INSTALL_PATH)) ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh -install: +install: all ifdef INSTALL_PATH @# Ask all targets to install their files - mkdir -p $(INSTALL_PATH) + mkdir -p $(INSTALL_PATH)/kselftest + install -m 744 kselftest/runner.sh $(INSTALL_PATH)/kselftest/ + install -m 744 kselftest/prefix.pl $(INSTALL_PATH)/kselftest/ @for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ make OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \ @@ -141,24 +191,20 @@ ifdef INSTALL_PATH echo "#!/bin/sh" > $(ALL_SCRIPT) echo "BASE_DIR=\$$(realpath \$$(dirname \$$0))" >> $(ALL_SCRIPT) echo "cd \$$BASE_DIR" >> $(ALL_SCRIPT) + echo ". ./kselftest/runner.sh" >> $(ALL_SCRIPT) echo "ROOT=\$$PWD" >> $(ALL_SCRIPT) echo "if [ \"\$$1\" = \"--summary\" ]; then" >> $(ALL_SCRIPT) - echo " OUTPUT=\$$BASE_DIR/output.log" >> $(ALL_SCRIPT) - echo " cat /dev/null > \$$OUTPUT" >> $(ALL_SCRIPT) - echo "else" >> $(ALL_SCRIPT) - echo " OUTPUT=/dev/stdout" >> $(ALL_SCRIPT) + echo " logfile=\$$BASE_DIR/output.log" >> $(ALL_SCRIPT) + echo " cat /dev/null > \$$logfile" >> $(ALL_SCRIPT) echo "fi" >> $(ALL_SCRIPT) - echo "export KSFT_TAP_LEVEL=1" >> $(ALL_SCRIPT) - echo "export skip=4" >> $(ALL_SCRIPT) for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ - echo "echo ; echo TAP version 13" >> $(ALL_SCRIPT); \ - echo "echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \ - echo "echo ========================================" >> $(ALL_SCRIPT); \ echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \ echo "cd $$TARGET" >> $(ALL_SCRIPT); \ + echo -n "run_many" >> $(ALL_SCRIPT); \ make -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \ + echo "" >> $(ALL_SCRIPT); \ echo "cd \$$ROOT" >> $(ALL_SCRIPT); \ done; @@ -173,4 +219,4 @@ clean: make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\ done; -.PHONY: all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean +.PHONY: khdr all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean diff --git a/tools/testing/selftests/android/Makefile b/tools/testing/selftests/android/Makefile index 72c25a3cb658..7c462714b418 100644 --- a/tools/testing/selftests/android/Makefile +++ b/tools/testing/selftests/android/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only SUBDIRS := ion TEST_PROGS := run.sh diff --git a/tools/testing/selftests/android/ion/Makefile b/tools/testing/selftests/android/ion/Makefile index 88cfe88e466f..0eb7ab626e1c 100644 --- a/tools/testing/selftests/android/ion/Makefile +++ b/tools/testing/selftests/android/ion/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only INCLUDEDIR := -I. -I../../../../../drivers/staging/android/uapi/ -I../../../../../usr/include/ CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore index 3b74d23fffab..dd5d69529382 100644 --- a/tools/testing/selftests/bpf/.gitignore +++ b/tools/testing/selftests/bpf/.gitignore @@ -30,4 +30,8 @@ test_netcnt test_section_names test_tcpnotify_user test_libbpf +test_tcp_check_syncookie_user +test_sysctl alu32 +libbpf.pc +libbpf.so.* diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 2aed37ea61a4..66f2dca1dee1 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -23,7 +23,7 @@ TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test test_align test_verifier_log test_dev_cgroup test_tcpbpf_user \ test_sock test_btf test_sockmap test_lirc_mode2_user get_cgroup_id_user \ test_socket_cookie test_cgroup_storage test_select_reuseport test_section_names \ - test_netcnt test_tcpnotify_user test_sock_fields + test_netcnt test_tcpnotify_user test_sock_fields test_sysctl BPF_OBJ_FILES = $(patsubst %.c,%.o, $(notdir $(wildcard progs/*.c))) TEST_GEN_FILES = $(BPF_OBJ_FILES) @@ -51,7 +51,10 @@ TEST_PROGS := test_kmod.sh \ test_skb_cgroup_id.sh \ test_flow_dissector.sh \ test_xdp_vlan.sh \ - test_lwt_ip_encap.sh + test_lwt_ip_encap.sh \ + test_tcp_check_syncookie.sh \ + test_tc_tunnel.sh \ + test_tc_edt.sh TEST_PROGS_EXTENDED := with_addr.sh \ with_tunnels.sh \ @@ -60,7 +63,7 @@ TEST_PROGS_EXTENDED := with_addr.sh \ # Compile but not part of 'make run_tests' TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \ - flow_dissector_load test_flow_dissector + flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user include ../lib.mk @@ -69,7 +72,9 @@ TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read all: $(TEST_CUSTOM_PROGS) $(OUTPUT)/urandom_read: $(OUTPUT)/%: %.c - $(CC) -o $@ -static $< -Wl,--build-id + $(CC) -o $@ $< -Wl,--build-id + +$(OUTPUT)/test_maps: map_tests/*.c BPFOBJ := $(OUTPUT)/libbpf.a @@ -90,6 +95,7 @@ $(OUTPUT)/get_cgroup_id_user: cgroup_helpers.c $(OUTPUT)/test_cgroup_storage: cgroup_helpers.c $(OUTPUT)/test_netcnt: cgroup_helpers.c $(OUTPUT)/test_sock_fields: cgroup_helpers.c +$(OUTPUT)/test_sysctl: cgroup_helpers.c .PHONY: force @@ -206,7 +212,7 @@ ifeq ($(DWARF2BTF),y) endif PROG_TESTS_H := $(OUTPUT)/prog_tests/tests.h -$(OUTPUT)/test_progs: $(PROG_TESTS_H) +test_progs.c: $(PROG_TESTS_H) $(OUTPUT)/test_progs: CFLAGS += $(TEST_PROGS_CFLAGS) $(OUTPUT)/test_progs: prog_tests/*.c @@ -228,8 +234,29 @@ $(PROG_TESTS_H): $(PROG_TESTS_DIR) $(PROG_TESTS_FILES) echo '#endif' \ ) > $(PROG_TESTS_H)) +TEST_MAPS_CFLAGS := -I. -I$(OUTPUT) +MAP_TESTS_DIR = $(OUTPUT)/map_tests +$(MAP_TESTS_DIR): + mkdir -p $@ +MAP_TESTS_H := $(MAP_TESTS_DIR)/tests.h +test_maps.c: $(MAP_TESTS_H) +$(OUTPUT)/test_maps: CFLAGS += $(TEST_MAPS_CFLAGS) +MAP_TESTS_FILES := $(wildcard map_tests/*.c) +$(MAP_TESTS_H): $(MAP_TESTS_DIR) $(MAP_TESTS_FILES) + $(shell ( cd map_tests/; \ + echo '/* Generated header, do not edit */'; \ + echo '#ifdef DECLARE'; \ + ls *.c 2> /dev/null | \ + sed -e 's@\([^\.]*\)\.c@extern void test_\1(void);@'; \ + echo '#endif'; \ + echo '#ifdef CALL'; \ + ls *.c 2> /dev/null | \ + sed -e 's@\([^\.]*\)\.c@test_\1();@'; \ + echo '#endif' \ + ) > $(MAP_TESTS_H)) + VERIFIER_TESTS_H := $(OUTPUT)/verifier/tests.h -$(OUTPUT)/test_verifier: $(VERIFIER_TESTS_H) +test_verifier.c: $(VERIFIER_TESTS_H) $(OUTPUT)/test_verifier: CFLAGS += $(TEST_VERIFIER_CFLAGS) VERIFIER_TESTS_DIR = $(OUTPUT)/verifier @@ -247,4 +274,4 @@ $(OUTPUT)/verifier/tests.h: $(VERIFIER_TESTS_DIR) $(VERIFIER_TEST_FILES) ) > $(VERIFIER_TESTS_H)) EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(ALU32_BUILD_DIR) \ - $(VERIFIER_TESTS_H) $(PROG_TESTS_H) + $(VERIFIER_TESTS_H) $(PROG_TESTS_H) $(MAP_TESTS_H) diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index c81fc350f7ad..5f6f9e7aba2a 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -9,14 +9,14 @@ #define SEC(NAME) __attribute__((section(NAME), used)) /* helper functions called from eBPF programs written in C */ -static void *(*bpf_map_lookup_elem)(void *map, void *key) = +static void *(*bpf_map_lookup_elem)(void *map, const void *key) = (void *) BPF_FUNC_map_lookup_elem; -static int (*bpf_map_update_elem)(void *map, void *key, void *value, +static int (*bpf_map_update_elem)(void *map, const void *key, const void *value, unsigned long long flags) = (void *) BPF_FUNC_map_update_elem; -static int (*bpf_map_delete_elem)(void *map, void *key) = +static int (*bpf_map_delete_elem)(void *map, const void *key) = (void *) BPF_FUNC_map_delete_elem; -static int (*bpf_map_push_elem)(void *map, void *value, +static int (*bpf_map_push_elem)(void *map, const void *value, unsigned long long flags) = (void *) BPF_FUNC_map_push_elem; static int (*bpf_map_pop_elem)(void *map, void *value) = @@ -159,6 +159,11 @@ static struct bpf_sock *(*bpf_sk_lookup_tcp)(void *ctx, int size, unsigned long long netns_id, unsigned long long flags) = (void *) BPF_FUNC_sk_lookup_tcp; +static struct bpf_sock *(*bpf_skc_lookup_tcp)(void *ctx, + struct bpf_sock_tuple *tuple, + int size, unsigned long long netns_id, + unsigned long long flags) = + (void *) BPF_FUNC_skc_lookup_tcp; static struct bpf_sock *(*bpf_sk_lookup_udp)(void *ctx, struct bpf_sock_tuple *tuple, int size, unsigned long long netns_id, @@ -184,6 +189,33 @@ static struct bpf_sock *(*bpf_get_listener_sock)(struct bpf_sock *sk) = (void *) BPF_FUNC_get_listener_sock; static int (*bpf_skb_ecn_set_ce)(void *ctx) = (void *) BPF_FUNC_skb_ecn_set_ce; +static int (*bpf_tcp_check_syncookie)(struct bpf_sock *sk, + void *ip, int ip_len, void *tcp, int tcp_len) = + (void *) BPF_FUNC_tcp_check_syncookie; +static int (*bpf_sysctl_get_name)(void *ctx, char *buf, + unsigned long long buf_len, + unsigned long long flags) = + (void *) BPF_FUNC_sysctl_get_name; +static int (*bpf_sysctl_get_current_value)(void *ctx, char *buf, + unsigned long long buf_len) = + (void *) BPF_FUNC_sysctl_get_current_value; +static int (*bpf_sysctl_get_new_value)(void *ctx, char *buf, + unsigned long long buf_len) = + (void *) BPF_FUNC_sysctl_get_new_value; +static int (*bpf_sysctl_set_new_value)(void *ctx, const char *buf, + unsigned long long buf_len) = + (void *) BPF_FUNC_sysctl_set_new_value; +static int (*bpf_strtol)(const char *buf, unsigned long long buf_len, + unsigned long long flags, long *res) = + (void *) BPF_FUNC_strtol; +static int (*bpf_strtoul)(const char *buf, unsigned long long buf_len, + unsigned long long flags, unsigned long *res) = + (void *) BPF_FUNC_strtoul; +static void *(*bpf_sk_storage_get)(void *map, struct bpf_sock *sk, + void *value, __u64 flags) = + (void *) BPF_FUNC_sk_storage_get; +static int (*bpf_sk_storage_delete)(void *map, struct bpf_sock *sk) = + (void *)BPF_FUNC_sk_storage_delete; /* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions @@ -246,7 +278,7 @@ static int (*bpf_skb_change_type)(void *ctx, __u32 type) = (void *) BPF_FUNC_skb_change_type; static unsigned int (*bpf_get_hash_recalc)(void *ctx) = (void *) BPF_FUNC_get_hash_recalc; -static unsigned long long (*bpf_get_current_task)(void *ctx) = +static unsigned long long (*bpf_get_current_task)(void) = (void *) BPF_FUNC_get_current_task; static int (*bpf_skb_change_tail)(void *ctx, __u32 len, __u64 flags) = (void *) BPF_FUNC_skb_change_tail; @@ -274,6 +306,9 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode, #elif defined(__TARGET_ARCH_s930x) #define bpf_target_s930x #define bpf_target_defined +#elif defined(__TARGET_ARCH_arm) + #define bpf_target_arm + #define bpf_target_defined #elif defined(__TARGET_ARCH_arm64) #define bpf_target_arm64 #define bpf_target_defined @@ -296,6 +331,8 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode, #define bpf_target_x86 #elif defined(__s390x__) #define bpf_target_s930x +#elif defined(__arm__) + #define bpf_target_arm #elif defined(__aarch64__) #define bpf_target_arm64 #elif defined(__mips__) @@ -333,6 +370,19 @@ static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode, #define PT_REGS_SP(x) ((x)->gprs[15]) #define PT_REGS_IP(x) ((x)->psw.addr) +#elif defined(bpf_target_arm) + +#define PT_REGS_PARM1(x) ((x)->uregs[0]) +#define PT_REGS_PARM2(x) ((x)->uregs[1]) +#define PT_REGS_PARM3(x) ((x)->uregs[2]) +#define PT_REGS_PARM4(x) ((x)->uregs[3]) +#define PT_REGS_PARM5(x) ((x)->uregs[4]) +#define PT_REGS_RET(x) ((x)->uregs[14]) +#define PT_REGS_FP(x) ((x)->uregs[11]) /* Works only with CONFIG_FRAME_POINTER */ +#define PT_REGS_RC(x) ((x)->uregs[0]) +#define PT_REGS_SP(x) ((x)->uregs[13]) +#define PT_REGS_IP(x) ((x)->uregs[12]) + #elif defined(bpf_target_arm64) #define PT_REGS_PARM1(x) ((x)->regs[0]) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 37f947ec44ed..f7a0744db31e 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -23,3 +23,14 @@ CONFIG_LWTUNNEL=y CONFIG_BPF_STREAM_PARSER=y CONFIG_XDP_SOCKETS=y CONFIG_FTRACE_SYSCALLS=y +CONFIG_IPV6_TUNNEL=y +CONFIG_IPV6_GRE=y +CONFIG_NET_FOU=m +CONFIG_NET_FOU_IP_TUNNELS=y +CONFIG_IPV6_FOU=m +CONFIG_IPV6_FOU_TUNNEL=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=m +CONFIG_MPLS_ROUTING=m +CONFIG_MPLS_IPTUNNEL=m +CONFIG_IPV6_SIT=m diff --git a/tools/testing/selftests/bpf/flow_dissector_load.c b/tools/testing/selftests/bpf/flow_dissector_load.c index 77cafa66d048..3fd83b9dc1bf 100644 --- a/tools/testing/selftests/bpf/flow_dissector_load.c +++ b/tools/testing/selftests/bpf/flow_dissector_load.c @@ -26,7 +26,7 @@ static void load_and_attach_program(void) struct bpf_object *obj; ret = bpf_flow_load(&obj, cfg_path_name, cfg_section_name, - cfg_map_name, &prog_fd); + cfg_map_name, NULL, &prog_fd, NULL); if (ret) error(1, 0, "bpf_flow_load %s", cfg_path_name); @@ -52,7 +52,7 @@ static void detach_program(void) sprintf(command, "rm -r %s", cfg_pin_path); ret = system(command); if (ret) - error(1, errno, command); + error(1, errno, "%s", command); } static void parse_opts(int argc, char **argv) diff --git a/tools/testing/selftests/bpf/flow_dissector_load.h b/tools/testing/selftests/bpf/flow_dissector_load.h index 41dd6959feb0..daeaeb518894 100644 --- a/tools/testing/selftests/bpf/flow_dissector_load.h +++ b/tools/testing/selftests/bpf/flow_dissector_load.h @@ -9,10 +9,12 @@ static inline int bpf_flow_load(struct bpf_object **obj, const char *path, const char *section_name, const char *map_name, - int *prog_fd) + const char *keys_map_name, + int *prog_fd, + int *keys_fd) { struct bpf_program *prog, *main_prog; - struct bpf_map *prog_array; + struct bpf_map *prog_array, *keys; int prog_array_fd; int ret, fd, i; @@ -23,19 +25,29 @@ static inline int bpf_flow_load(struct bpf_object **obj, main_prog = bpf_object__find_program_by_title(*obj, section_name); if (!main_prog) - return ret; + return -1; *prog_fd = bpf_program__fd(main_prog); if (*prog_fd < 0) - return ret; + return -1; prog_array = bpf_object__find_map_by_name(*obj, map_name); if (!prog_array) - return ret; + return -1; prog_array_fd = bpf_map__fd(prog_array); if (prog_array_fd < 0) - return ret; + return -1; + + if (keys_map_name && keys_fd) { + keys = bpf_object__find_map_by_name(*obj, keys_map_name); + if (!keys) + return -1; + + *keys_fd = bpf_map__fd(keys); + if (*keys_fd < 0) + return -1; + } i = 0; bpf_object__for_each_program(prog, *obj) { diff --git a/tools/testing/selftests/bpf/map_tests/.gitignore b/tools/testing/selftests/bpf/map_tests/.gitignore new file mode 100644 index 000000000000..45984a364647 --- /dev/null +++ b/tools/testing/selftests/bpf/map_tests/.gitignore @@ -0,0 +1 @@ +tests.h diff --git a/tools/testing/selftests/bpf/map_tests/sk_storage_map.c b/tools/testing/selftests/bpf/map_tests/sk_storage_map.c new file mode 100644 index 000000000000..e569edc679d8 --- /dev/null +++ b/tools/testing/selftests/bpf/map_tests/sk_storage_map.c @@ -0,0 +1,629 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019 Facebook */ +#include <linux/compiler.h> +#include <linux/err.h> + +#include <sys/resource.h> +#include <sys/socket.h> +#include <sys/types.h> +#include <linux/btf.h> +#include <unistd.h> +#include <signal.h> +#include <errno.h> +#include <string.h> +#include <pthread.h> + +#include <bpf/bpf.h> +#include <bpf/libbpf.h> + +#include <test_btf.h> +#include <test_maps.h> + +static struct bpf_create_map_attr xattr = { + .name = "sk_storage_map", + .map_type = BPF_MAP_TYPE_SK_STORAGE, + .map_flags = BPF_F_NO_PREALLOC, + .max_entries = 0, + .key_size = 4, + .value_size = 8, + .btf_key_type_id = 1, + .btf_value_type_id = 3, + .btf_fd = -1, +}; + +static unsigned int nr_sk_threads_done; +static unsigned int nr_sk_threads_err; +static unsigned int nr_sk_per_thread = 4096; +static unsigned int nr_sk_threads = 4; +static int sk_storage_map = -1; +static unsigned int stop; +static int runtime_s = 5; + +static bool is_stopped(void) +{ + return READ_ONCE(stop); +} + +static unsigned int threads_err(void) +{ + return READ_ONCE(nr_sk_threads_err); +} + +static void notify_thread_err(void) +{ + __sync_add_and_fetch(&nr_sk_threads_err, 1); +} + +static bool wait_for_threads_err(void) +{ + while (!is_stopped() && !threads_err()) + usleep(500); + + return !is_stopped(); +} + +static unsigned int threads_done(void) +{ + return READ_ONCE(nr_sk_threads_done); +} + +static void notify_thread_done(void) +{ + __sync_add_and_fetch(&nr_sk_threads_done, 1); +} + +static void notify_thread_redo(void) +{ + __sync_sub_and_fetch(&nr_sk_threads_done, 1); +} + +static bool wait_for_threads_done(void) +{ + while (threads_done() != nr_sk_threads && !is_stopped() && + !threads_err()) + usleep(50); + + return !is_stopped() && !threads_err(); +} + +static bool wait_for_threads_redo(void) +{ + while (threads_done() && !is_stopped() && !threads_err()) + usleep(50); + + return !is_stopped() && !threads_err(); +} + +static bool wait_for_map(void) +{ + while (READ_ONCE(sk_storage_map) == -1 && !is_stopped()) + usleep(50); + + return !is_stopped(); +} + +static bool wait_for_map_close(void) +{ + while (READ_ONCE(sk_storage_map) != -1 && !is_stopped()) + ; + + return !is_stopped(); +} + +static int load_btf(void) +{ + const char btf_str_sec[] = "\0bpf_spin_lock\0val\0cnt\0l"; + __u32 btf_raw_types[] = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* struct bpf_spin_lock */ /* [2] */ + BTF_TYPE_ENC(1, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4), + BTF_MEMBER_ENC(15, 1, 0), /* int val; */ + /* struct val */ /* [3] */ + BTF_TYPE_ENC(15, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 2), 8), + BTF_MEMBER_ENC(19, 1, 0), /* int cnt; */ + BTF_MEMBER_ENC(23, 2, 32),/* struct bpf_spin_lock l; */ + }; + struct btf_header btf_hdr = { + .magic = BTF_MAGIC, + .version = BTF_VERSION, + .hdr_len = sizeof(struct btf_header), + .type_len = sizeof(btf_raw_types), + .str_off = sizeof(btf_raw_types), + .str_len = sizeof(btf_str_sec), + }; + __u8 raw_btf[sizeof(struct btf_header) + sizeof(btf_raw_types) + + sizeof(btf_str_sec)]; + + memcpy(raw_btf, &btf_hdr, sizeof(btf_hdr)); + memcpy(raw_btf + sizeof(btf_hdr), btf_raw_types, sizeof(btf_raw_types)); + memcpy(raw_btf + sizeof(btf_hdr) + sizeof(btf_raw_types), + btf_str_sec, sizeof(btf_str_sec)); + + return bpf_load_btf(raw_btf, sizeof(raw_btf), 0, 0, 0); +} + +static int create_sk_storage_map(void) +{ + int btf_fd, map_fd; + + btf_fd = load_btf(); + CHECK(btf_fd == -1, "bpf_load_btf", "btf_fd:%d errno:%d\n", + btf_fd, errno); + xattr.btf_fd = btf_fd; + + map_fd = bpf_create_map_xattr(&xattr); + xattr.btf_fd = -1; + close(btf_fd); + CHECK(map_fd == -1, + "bpf_create_map_xattr()", "errno:%d\n", errno); + + return map_fd; +} + +static void *insert_close_thread(void *arg) +{ + struct { + int cnt; + int lock; + } value = { .cnt = 0xeB9F, .lock = 0, }; + int i, map_fd, err, *sk_fds; + + sk_fds = malloc(sizeof(*sk_fds) * nr_sk_per_thread); + if (!sk_fds) { + notify_thread_err(); + return ERR_PTR(-ENOMEM); + } + + for (i = 0; i < nr_sk_per_thread; i++) + sk_fds[i] = -1; + + while (!is_stopped()) { + if (!wait_for_map()) + goto close_all; + + map_fd = READ_ONCE(sk_storage_map); + for (i = 0; i < nr_sk_per_thread && !is_stopped(); i++) { + sk_fds[i] = socket(AF_INET6, SOCK_STREAM, 0); + if (sk_fds[i] == -1) { + err = -errno; + fprintf(stderr, "socket(): errno:%d\n", errno); + goto errout; + } + err = bpf_map_update_elem(map_fd, &sk_fds[i], &value, + BPF_NOEXIST); + if (err) { + err = -errno; + fprintf(stderr, + "bpf_map_update_elem(): errno:%d\n", + errno); + goto errout; + } + } + + notify_thread_done(); + wait_for_map_close(); + +close_all: + for (i = 0; i < nr_sk_per_thread; i++) { + close(sk_fds[i]); + sk_fds[i] = -1; + } + + notify_thread_redo(); + } + + free(sk_fds); + return NULL; + +errout: + for (i = 0; i < nr_sk_per_thread && sk_fds[i] != -1; i++) + close(sk_fds[i]); + free(sk_fds); + notify_thread_err(); + return ERR_PTR(err); +} + +static int do_sk_storage_map_stress_free(void) +{ + int i, map_fd = -1, err = 0, nr_threads_created = 0; + pthread_t *sk_thread_ids; + void *thread_ret; + + sk_thread_ids = malloc(sizeof(pthread_t) * nr_sk_threads); + if (!sk_thread_ids) { + fprintf(stderr, "malloc(sk_threads): NULL\n"); + return -ENOMEM; + } + + for (i = 0; i < nr_sk_threads; i++) { + err = pthread_create(&sk_thread_ids[i], NULL, + insert_close_thread, NULL); + if (err) { + err = -errno; + goto done; + } + nr_threads_created++; + } + + while (!is_stopped()) { + map_fd = create_sk_storage_map(); + WRITE_ONCE(sk_storage_map, map_fd); + + if (!wait_for_threads_done()) + break; + + WRITE_ONCE(sk_storage_map, -1); + close(map_fd); + map_fd = -1; + + if (!wait_for_threads_redo()) + break; + } + +done: + WRITE_ONCE(stop, 1); + for (i = 0; i < nr_threads_created; i++) { + pthread_join(sk_thread_ids[i], &thread_ret); + if (IS_ERR(thread_ret) && !err) { + err = PTR_ERR(thread_ret); + fprintf(stderr, "threads#%u: err:%d\n", i, err); + } + } + free(sk_thread_ids); + + if (map_fd != -1) + close(map_fd); + + return err; +} + +static void *update_thread(void *arg) +{ + struct { + int cnt; + int lock; + } value = { .cnt = 0xeB9F, .lock = 0, }; + int map_fd = READ_ONCE(sk_storage_map); + int sk_fd = *(int *)arg; + int err = 0; /* Suppress compiler false alarm */ + + while (!is_stopped()) { + err = bpf_map_update_elem(map_fd, &sk_fd, &value, 0); + if (err && errno != EAGAIN) { + err = -errno; + fprintf(stderr, "bpf_map_update_elem: %d %d\n", + err, errno); + break; + } + } + + if (!is_stopped()) { + notify_thread_err(); + return ERR_PTR(err); + } + + return NULL; +} + +static void *delete_thread(void *arg) +{ + int map_fd = READ_ONCE(sk_storage_map); + int sk_fd = *(int *)arg; + int err = 0; /* Suppress compiler false alarm */ + + while (!is_stopped()) { + err = bpf_map_delete_elem(map_fd, &sk_fd); + if (err && errno != ENOENT) { + err = -errno; + fprintf(stderr, "bpf_map_delete_elem: %d %d\n", + err, errno); + break; + } + } + + if (!is_stopped()) { + notify_thread_err(); + return ERR_PTR(err); + } + + return NULL; +} + +static int do_sk_storage_map_stress_change(void) +{ + int i, sk_fd, map_fd = -1, err = 0, nr_threads_created = 0; + pthread_t *sk_thread_ids; + void *thread_ret; + + sk_thread_ids = malloc(sizeof(pthread_t) * nr_sk_threads); + if (!sk_thread_ids) { + fprintf(stderr, "malloc(sk_threads): NULL\n"); + return -ENOMEM; + } + + sk_fd = socket(AF_INET6, SOCK_STREAM, 0); + if (sk_fd == -1) { + err = -errno; + goto done; + } + + map_fd = create_sk_storage_map(); + WRITE_ONCE(sk_storage_map, map_fd); + + for (i = 0; i < nr_sk_threads; i++) { + if (i & 0x1) + err = pthread_create(&sk_thread_ids[i], NULL, + update_thread, &sk_fd); + else + err = pthread_create(&sk_thread_ids[i], NULL, + delete_thread, &sk_fd); + if (err) { + err = -errno; + goto done; + } + nr_threads_created++; + } + + wait_for_threads_err(); + +done: + WRITE_ONCE(stop, 1); + for (i = 0; i < nr_threads_created; i++) { + pthread_join(sk_thread_ids[i], &thread_ret); + if (IS_ERR(thread_ret) && !err) { + err = PTR_ERR(thread_ret); + fprintf(stderr, "threads#%u: err:%d\n", i, err); + } + } + free(sk_thread_ids); + + if (sk_fd != -1) + close(sk_fd); + close(map_fd); + + return err; +} + +static void stop_handler(int signum) +{ + if (signum != SIGALRM) + printf("stopping...\n"); + WRITE_ONCE(stop, 1); +} + +#define BPF_SK_STORAGE_MAP_TEST_NR_THREADS "BPF_SK_STORAGE_MAP_TEST_NR_THREADS" +#define BPF_SK_STORAGE_MAP_TEST_SK_PER_THREAD "BPF_SK_STORAGE_MAP_TEST_SK_PER_THREAD" +#define BPF_SK_STORAGE_MAP_TEST_RUNTIME_S "BPF_SK_STORAGE_MAP_TEST_RUNTIME_S" +#define BPF_SK_STORAGE_MAP_TEST_NAME "BPF_SK_STORAGE_MAP_TEST_NAME" + +static void test_sk_storage_map_stress_free(void) +{ + struct rlimit rlim_old, rlim_new = {}; + int err; + + getrlimit(RLIMIT_NOFILE, &rlim_old); + + signal(SIGTERM, stop_handler); + signal(SIGINT, stop_handler); + if (runtime_s > 0) { + signal(SIGALRM, stop_handler); + alarm(runtime_s); + } + + if (rlim_old.rlim_cur < nr_sk_threads * nr_sk_per_thread) { + rlim_new.rlim_cur = nr_sk_threads * nr_sk_per_thread + 128; + rlim_new.rlim_max = rlim_new.rlim_cur + 128; + err = setrlimit(RLIMIT_NOFILE, &rlim_new); + CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d", + rlim_new.rlim_cur, errno); + } + + err = do_sk_storage_map_stress_free(); + + signal(SIGTERM, SIG_DFL); + signal(SIGINT, SIG_DFL); + if (runtime_s > 0) { + signal(SIGALRM, SIG_DFL); + alarm(0); + } + + if (rlim_new.rlim_cur) + setrlimit(RLIMIT_NOFILE, &rlim_old); + + CHECK(err, "test_sk_storage_map_stress_free", "err:%d\n", err); +} + +static void test_sk_storage_map_stress_change(void) +{ + int err; + + signal(SIGTERM, stop_handler); + signal(SIGINT, stop_handler); + if (runtime_s > 0) { + signal(SIGALRM, stop_handler); + alarm(runtime_s); + } + + err = do_sk_storage_map_stress_change(); + + signal(SIGTERM, SIG_DFL); + signal(SIGINT, SIG_DFL); + if (runtime_s > 0) { + signal(SIGALRM, SIG_DFL); + alarm(0); + } + + CHECK(err, "test_sk_storage_map_stress_change", "err:%d\n", err); +} + +static void test_sk_storage_map_basic(void) +{ + struct { + int cnt; + int lock; + } value = { .cnt = 0xeB9f, .lock = 0, }, lookup_value; + struct bpf_create_map_attr bad_xattr; + int btf_fd, map_fd, sk_fd, err; + + btf_fd = load_btf(); + CHECK(btf_fd == -1, "bpf_load_btf", "btf_fd:%d errno:%d\n", + btf_fd, errno); + xattr.btf_fd = btf_fd; + + sk_fd = socket(AF_INET6, SOCK_STREAM, 0); + CHECK(sk_fd == -1, "socket()", "sk_fd:%d errno:%d\n", + sk_fd, errno); + + map_fd = bpf_create_map_xattr(&xattr); + CHECK(map_fd == -1, "bpf_create_map_xattr(good_xattr)", + "map_fd:%d errno:%d\n", map_fd, errno); + + /* Add new elem */ + memcpy(&lookup_value, &value, sizeof(value)); + err = bpf_map_update_elem(map_fd, &sk_fd, &value, + BPF_NOEXIST | BPF_F_LOCK); + CHECK(err, "bpf_map_update_elem(BPF_NOEXIST|BPF_F_LOCK)", + "err:%d errno:%d\n", err, errno); + err = bpf_map_lookup_elem_flags(map_fd, &sk_fd, &lookup_value, + BPF_F_LOCK); + CHECK(err || lookup_value.cnt != value.cnt, + "bpf_map_lookup_elem_flags(BPF_F_LOCK)", + "err:%d errno:%d cnt:%x(%x)\n", + err, errno, lookup_value.cnt, value.cnt); + + /* Bump the cnt and update with BPF_EXIST | BPF_F_LOCK */ + value.cnt += 1; + err = bpf_map_update_elem(map_fd, &sk_fd, &value, + BPF_EXIST | BPF_F_LOCK); + CHECK(err, "bpf_map_update_elem(BPF_EXIST|BPF_F_LOCK)", + "err:%d errno:%d\n", err, errno); + err = bpf_map_lookup_elem_flags(map_fd, &sk_fd, &lookup_value, + BPF_F_LOCK); + CHECK(err || lookup_value.cnt != value.cnt, + "bpf_map_lookup_elem_flags(BPF_F_LOCK)", + "err:%d errno:%d cnt:%x(%x)\n", + err, errno, lookup_value.cnt, value.cnt); + + /* Bump the cnt and update with BPF_EXIST */ + value.cnt += 1; + err = bpf_map_update_elem(map_fd, &sk_fd, &value, BPF_EXIST); + CHECK(err, "bpf_map_update_elem(BPF_EXIST)", + "err:%d errno:%d\n", err, errno); + err = bpf_map_lookup_elem_flags(map_fd, &sk_fd, &lookup_value, + BPF_F_LOCK); + CHECK(err || lookup_value.cnt != value.cnt, + "bpf_map_lookup_elem_flags(BPF_F_LOCK)", + "err:%d errno:%d cnt:%x(%x)\n", + err, errno, lookup_value.cnt, value.cnt); + + /* Update with BPF_NOEXIST */ + value.cnt += 1; + err = bpf_map_update_elem(map_fd, &sk_fd, &value, + BPF_NOEXIST | BPF_F_LOCK); + CHECK(!err || errno != EEXIST, + "bpf_map_update_elem(BPF_NOEXIST|BPF_F_LOCK)", + "err:%d errno:%d\n", err, errno); + err = bpf_map_update_elem(map_fd, &sk_fd, &value, BPF_NOEXIST); + CHECK(!err || errno != EEXIST, "bpf_map_update_elem(BPF_NOEXIST)", + "err:%d errno:%d\n", err, errno); + value.cnt -= 1; + err = bpf_map_lookup_elem_flags(map_fd, &sk_fd, &lookup_value, + BPF_F_LOCK); + CHECK(err || lookup_value.cnt != value.cnt, + "bpf_map_lookup_elem_flags(BPF_F_LOCK)", + "err:%d errno:%d cnt:%x(%x)\n", + err, errno, lookup_value.cnt, value.cnt); + + /* Bump the cnt again and update with map_flags == 0 */ + value.cnt += 1; + err = bpf_map_update_elem(map_fd, &sk_fd, &value, 0); + CHECK(err, "bpf_map_update_elem()", "err:%d errno:%d\n", + err, errno); + err = bpf_map_lookup_elem_flags(map_fd, &sk_fd, &lookup_value, + BPF_F_LOCK); + CHECK(err || lookup_value.cnt != value.cnt, + "bpf_map_lookup_elem_flags(BPF_F_LOCK)", + "err:%d errno:%d cnt:%x(%x)\n", + err, errno, lookup_value.cnt, value.cnt); + + /* Test delete elem */ + err = bpf_map_delete_elem(map_fd, &sk_fd); + CHECK(err, "bpf_map_delete_elem()", "err:%d errno:%d\n", + err, errno); + err = bpf_map_lookup_elem_flags(map_fd, &sk_fd, &lookup_value, + BPF_F_LOCK); + CHECK(!err || errno != ENOENT, + "bpf_map_lookup_elem_flags(BPF_F_LOCK)", + "err:%d errno:%d\n", err, errno); + err = bpf_map_delete_elem(map_fd, &sk_fd); + CHECK(!err || errno != ENOENT, "bpf_map_delete_elem()", + "err:%d errno:%d\n", err, errno); + + memcpy(&bad_xattr, &xattr, sizeof(xattr)); + bad_xattr.btf_key_type_id = 0; + err = bpf_create_map_xattr(&bad_xattr); + CHECK(!err || errno != EINVAL, "bap_create_map_xattr(bad_xattr)", + "err:%d errno:%d\n", err, errno); + + memcpy(&bad_xattr, &xattr, sizeof(xattr)); + bad_xattr.btf_key_type_id = 3; + err = bpf_create_map_xattr(&bad_xattr); + CHECK(!err || errno != EINVAL, "bap_create_map_xattr(bad_xattr)", + "err:%d errno:%d\n", err, errno); + + memcpy(&bad_xattr, &xattr, sizeof(xattr)); + bad_xattr.max_entries = 1; + err = bpf_create_map_xattr(&bad_xattr); + CHECK(!err || errno != EINVAL, "bap_create_map_xattr(bad_xattr)", + "err:%d errno:%d\n", err, errno); + + memcpy(&bad_xattr, &xattr, sizeof(xattr)); + bad_xattr.map_flags = 0; + err = bpf_create_map_xattr(&bad_xattr); + CHECK(!err || errno != EINVAL, "bap_create_map_xattr(bad_xattr)", + "err:%d errno:%d\n", err, errno); + + xattr.btf_fd = -1; + close(btf_fd); + close(map_fd); + close(sk_fd); +} + +void test_sk_storage_map(void) +{ + const char *test_name, *env_opt; + bool test_ran = false; + + test_name = getenv(BPF_SK_STORAGE_MAP_TEST_NAME); + + env_opt = getenv(BPF_SK_STORAGE_MAP_TEST_NR_THREADS); + if (env_opt) + nr_sk_threads = atoi(env_opt); + + env_opt = getenv(BPF_SK_STORAGE_MAP_TEST_SK_PER_THREAD); + if (env_opt) + nr_sk_per_thread = atoi(env_opt); + + env_opt = getenv(BPF_SK_STORAGE_MAP_TEST_RUNTIME_S); + if (env_opt) + runtime_s = atoi(env_opt); + + if (!test_name || !strcmp(test_name, "basic")) { + test_sk_storage_map_basic(); + test_ran = true; + } + if (!test_name || !strcmp(test_name, "stress_free")) { + test_sk_storage_map_stress_free(); + test_ran = true; + } + if (!test_name || !strcmp(test_name, "stress_change")) { + test_sk_storage_map_stress_change(); + test_ran = true; + } + + if (test_ran) + printf("%s:PASS\n", __func__); + else + CHECK(1, "Invalid test_name", "%s\n", test_name); +} diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c index a64f7a02139c..cb827383db4d 100644 --- a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c +++ b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c @@ -73,7 +73,7 @@ void test_bpf_obj_id(void) info_len != sizeof(struct bpf_map_info) || strcmp((char *)map_infos[i].name, expected_map_name), "get-map-info(fd)", - "err %d errno %d type %d(%d) info_len %u(%Zu) key_size %u value_size %u max_entries %u map_flags %X name %s(%s)\n", + "err %d errno %d type %d(%d) info_len %u(%zu) key_size %u value_size %u max_entries %u map_flags %X name %s(%s)\n", err, errno, map_infos[i].type, BPF_MAP_TYPE_ARRAY, info_len, sizeof(struct bpf_map_info), @@ -117,7 +117,7 @@ void test_bpf_obj_id(void) *(int *)(long)prog_infos[i].map_ids != map_infos[i].id || strcmp((char *)prog_infos[i].name, expected_prog_name), "get-prog-info(fd)", - "err %d errno %d i %d type %d(%d) info_len %u(%Zu) jit_enabled %d jited_prog_len %u xlated_prog_len %u jited_prog %d xlated_prog %d load_time %lu(%lu) uid %u(%u) nr_map_ids %u(%u) map_id %u(%u) name %s(%s)\n", + "err %d errno %d i %d type %d(%d) info_len %u(%zu) jit_enabled %d jited_prog_len %u xlated_prog_len %u jited_prog %d xlated_prog %d load_time %lu(%lu) uid %u(%u) nr_map_ids %u(%u) map_id %u(%u) name %s(%s)\n", err, errno, i, prog_infos[i].type, BPF_PROG_TYPE_SOCKET_FILTER, info_len, sizeof(struct bpf_prog_info), @@ -185,7 +185,7 @@ void test_bpf_obj_id(void) memcmp(&prog_info, &prog_infos[i], info_len) || *(int *)(long)prog_info.map_ids != saved_map_id, "get-prog-info(next_id->fd)", - "err %d errno %d info_len %u(%Zu) memcmp %d map_id %u(%u)\n", + "err %d errno %d info_len %u(%zu) memcmp %d map_id %u(%u)\n", err, errno, info_len, sizeof(struct bpf_prog_info), memcmp(&prog_info, &prog_infos[i], info_len), *(int *)(long)prog_info.map_ids, saved_map_id); @@ -231,7 +231,7 @@ void test_bpf_obj_id(void) memcmp(&map_info, &map_infos[i], info_len) || array_value != array_magic_value, "check get-map-info(next_id->fd)", - "err %d errno %d info_len %u(%Zu) memcmp %d array_value %llu(%llu)\n", + "err %d errno %d info_len %u(%zu) memcmp %d array_value %llu(%llu)\n", err, errno, info_len, sizeof(struct bpf_map_info), memcmp(&map_info, &map_infos[i], info_len), array_value, array_magic_value); diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_verif_scale.c b/tools/testing/selftests/bpf/prog_tests/bpf_verif_scale.c new file mode 100644 index 000000000000..b74e2f6e96d0 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/bpf_verif_scale.c @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Facebook +#include <test_progs.h> +static int libbpf_debug_print(enum libbpf_print_level level, + const char *format, va_list args) +{ + if (level != LIBBPF_DEBUG) + return 0; + + if (!strstr(format, "verifier log")) + return 0; + return vfprintf(stderr, "%s", args); +} + +static int check_load(const char *file) +{ + struct bpf_prog_load_attr attr; + struct bpf_object *obj = NULL; + int err, prog_fd; + + memset(&attr, 0, sizeof(struct bpf_prog_load_attr)); + attr.file = file; + attr.prog_type = BPF_PROG_TYPE_SCHED_CLS; + attr.log_level = 4; + err = bpf_prog_load_xattr(&attr, &obj, &prog_fd); + bpf_object__close(obj); + if (err) + error_cnt++; + return err; +} + +void test_bpf_verif_scale(void) +{ + const char *file1 = "./test_verif_scale1.o"; + const char *file2 = "./test_verif_scale2.o"; + const char *file3 = "./test_verif_scale3.o"; + int err; + + if (verifier_stats) + libbpf_set_print(libbpf_debug_print); + + err = check_load(file1); + err |= check_load(file2); + err |= check_load(file3); + if (!err) + printf("test_verif_scale:OK\n"); + else + printf("test_verif_scale:FAIL\n"); +} diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c index bcbd928c96ab..fbd1d88a6095 100644 --- a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c +++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c @@ -1,8 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 #include <test_progs.h> +#include <error.h> +#include <linux/if.h> +#include <linux/if_tun.h> #define CHECK_FLOW_KEYS(desc, got, expected) \ - CHECK(memcmp(&got, &expected, sizeof(got)) != 0, \ + CHECK_ATTR(memcmp(&got, &expected, sizeof(got)) != 0, \ desc, \ "nhoff=%u/%u " \ "thoff=%u/%u " \ @@ -10,6 +13,7 @@ "is_frag=%u/%u " \ "is_first_frag=%u/%u " \ "is_encap=%u/%u " \ + "ip_proto=0x%x/0x%x " \ "n_proto=0x%x/0x%x " \ "sport=%u/%u " \ "dport=%u/%u\n", \ @@ -19,54 +23,247 @@ got.is_frag, expected.is_frag, \ got.is_first_frag, expected.is_first_frag, \ got.is_encap, expected.is_encap, \ + got.ip_proto, expected.ip_proto, \ got.n_proto, expected.n_proto, \ got.sport, expected.sport, \ got.dport, expected.dport) -static struct bpf_flow_keys pkt_v4_flow_keys = { - .nhoff = 0, - .thoff = sizeof(struct iphdr), - .addr_proto = ETH_P_IP, - .ip_proto = IPPROTO_TCP, - .n_proto = __bpf_constant_htons(ETH_P_IP), +struct ipv4_pkt { + struct ethhdr eth; + struct iphdr iph; + struct tcphdr tcp; +} __packed; + +struct svlan_ipv4_pkt { + struct ethhdr eth; + __u16 vlan_tci; + __u16 vlan_proto; + struct iphdr iph; + struct tcphdr tcp; +} __packed; + +struct ipv6_pkt { + struct ethhdr eth; + struct ipv6hdr iph; + struct tcphdr tcp; +} __packed; + +struct dvlan_ipv6_pkt { + struct ethhdr eth; + __u16 vlan_tci; + __u16 vlan_proto; + __u16 vlan_tci2; + __u16 vlan_proto2; + struct ipv6hdr iph; + struct tcphdr tcp; +} __packed; + +struct test { + const char *name; + union { + struct ipv4_pkt ipv4; + struct svlan_ipv4_pkt svlan_ipv4; + struct ipv6_pkt ipv6; + struct dvlan_ipv6_pkt dvlan_ipv6; + } pkt; + struct bpf_flow_keys keys; }; -static struct bpf_flow_keys pkt_v6_flow_keys = { - .nhoff = 0, - .thoff = sizeof(struct ipv6hdr), - .addr_proto = ETH_P_IPV6, - .ip_proto = IPPROTO_TCP, - .n_proto = __bpf_constant_htons(ETH_P_IPV6), +#define VLAN_HLEN 4 + +struct test tests[] = { + { + .name = "ipv4", + .pkt.ipv4 = { + .eth.h_proto = __bpf_constant_htons(ETH_P_IP), + .iph.ihl = 5, + .iph.protocol = IPPROTO_TCP, + .iph.tot_len = __bpf_constant_htons(MAGIC_BYTES), + .tcp.doff = 5, + }, + .keys = { + .nhoff = ETH_HLEN, + .thoff = ETH_HLEN + sizeof(struct iphdr), + .addr_proto = ETH_P_IP, + .ip_proto = IPPROTO_TCP, + .n_proto = __bpf_constant_htons(ETH_P_IP), + }, + }, + { + .name = "ipv6", + .pkt.ipv6 = { + .eth.h_proto = __bpf_constant_htons(ETH_P_IPV6), + .iph.nexthdr = IPPROTO_TCP, + .iph.payload_len = __bpf_constant_htons(MAGIC_BYTES), + .tcp.doff = 5, + }, + .keys = { + .nhoff = ETH_HLEN, + .thoff = ETH_HLEN + sizeof(struct ipv6hdr), + .addr_proto = ETH_P_IPV6, + .ip_proto = IPPROTO_TCP, + .n_proto = __bpf_constant_htons(ETH_P_IPV6), + }, + }, + { + .name = "802.1q-ipv4", + .pkt.svlan_ipv4 = { + .eth.h_proto = __bpf_constant_htons(ETH_P_8021Q), + .vlan_proto = __bpf_constant_htons(ETH_P_IP), + .iph.ihl = 5, + .iph.protocol = IPPROTO_TCP, + .iph.tot_len = __bpf_constant_htons(MAGIC_BYTES), + .tcp.doff = 5, + }, + .keys = { + .nhoff = ETH_HLEN + VLAN_HLEN, + .thoff = ETH_HLEN + VLAN_HLEN + sizeof(struct iphdr), + .addr_proto = ETH_P_IP, + .ip_proto = IPPROTO_TCP, + .n_proto = __bpf_constant_htons(ETH_P_IP), + }, + }, + { + .name = "802.1ad-ipv6", + .pkt.dvlan_ipv6 = { + .eth.h_proto = __bpf_constant_htons(ETH_P_8021AD), + .vlan_proto = __bpf_constant_htons(ETH_P_8021Q), + .vlan_proto2 = __bpf_constant_htons(ETH_P_IPV6), + .iph.nexthdr = IPPROTO_TCP, + .iph.payload_len = __bpf_constant_htons(MAGIC_BYTES), + .tcp.doff = 5, + }, + .keys = { + .nhoff = ETH_HLEN + VLAN_HLEN * 2, + .thoff = ETH_HLEN + VLAN_HLEN * 2 + + sizeof(struct ipv6hdr), + .addr_proto = ETH_P_IPV6, + .ip_proto = IPPROTO_TCP, + .n_proto = __bpf_constant_htons(ETH_P_IPV6), + }, + }, }; +static int create_tap(const char *ifname) +{ + struct ifreq ifr = { + .ifr_flags = IFF_TAP | IFF_NO_PI | IFF_NAPI | IFF_NAPI_FRAGS, + }; + int fd, ret; + + strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); + + fd = open("/dev/net/tun", O_RDWR); + if (fd < 0) + return -1; + + ret = ioctl(fd, TUNSETIFF, &ifr); + if (ret) + return -1; + + return fd; +} + +static int tx_tap(int fd, void *pkt, size_t len) +{ + struct iovec iov[] = { + { + .iov_len = len, + .iov_base = pkt, + }, + }; + return writev(fd, iov, ARRAY_SIZE(iov)); +} + +static int ifup(const char *ifname) +{ + struct ifreq ifr = {}; + int sk, ret; + + strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); + + sk = socket(PF_INET, SOCK_DGRAM, 0); + if (sk < 0) + return -1; + + ret = ioctl(sk, SIOCGIFFLAGS, &ifr); + if (ret) { + close(sk); + return -1; + } + + ifr.ifr_flags |= IFF_UP; + ret = ioctl(sk, SIOCSIFFLAGS, &ifr); + if (ret) { + close(sk); + return -1; + } + + close(sk); + return 0; +} + void test_flow_dissector(void) { - struct bpf_flow_keys flow_keys; + int i, err, prog_fd, keys_fd = -1, tap_fd; struct bpf_object *obj; - __u32 duration, retval; - int err, prog_fd; - __u32 size; + __u32 duration = 0; err = bpf_flow_load(&obj, "./bpf_flow.o", "flow_dissector", - "jmp_table", &prog_fd); + "jmp_table", "last_dissection", &prog_fd, &keys_fd); if (err) { error_cnt++; return; } - err = bpf_prog_test_run(prog_fd, 10, &pkt_v4, sizeof(pkt_v4), - &flow_keys, &size, &retval, &duration); - CHECK(size != sizeof(flow_keys) || err || retval != 1, "ipv4", - "err %d errno %d retval %d duration %d size %u/%lu\n", - err, errno, retval, duration, size, sizeof(flow_keys)); - CHECK_FLOW_KEYS("ipv4_flow_keys", flow_keys, pkt_v4_flow_keys); + for (i = 0; i < ARRAY_SIZE(tests); i++) { + struct bpf_flow_keys flow_keys; + struct bpf_prog_test_run_attr tattr = { + .prog_fd = prog_fd, + .data_in = &tests[i].pkt, + .data_size_in = sizeof(tests[i].pkt), + .data_out = &flow_keys, + }; - err = bpf_prog_test_run(prog_fd, 10, &pkt_v6, sizeof(pkt_v6), - &flow_keys, &size, &retval, &duration); - CHECK(size != sizeof(flow_keys) || err || retval != 1, "ipv6", - "err %d errno %d retval %d duration %d size %u/%lu\n", - err, errno, retval, duration, size, sizeof(flow_keys)); - CHECK_FLOW_KEYS("ipv6_flow_keys", flow_keys, pkt_v6_flow_keys); + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(tattr.data_size_out != sizeof(flow_keys) || + err || tattr.retval != 1, + tests[i].name, + "err %d errno %d retval %d duration %d size %u/%lu\n", + err, errno, tattr.retval, tattr.duration, + tattr.data_size_out, sizeof(flow_keys)); + CHECK_FLOW_KEYS(tests[i].name, flow_keys, tests[i].keys); + } + + /* Do the same tests but for skb-less flow dissector. + * We use a known path in the net/tun driver that calls + * eth_get_headlen and we manually export bpf_flow_keys + * via BPF map in this case. + */ + + err = bpf_prog_attach(prog_fd, 0, BPF_FLOW_DISSECTOR, 0); + CHECK(err, "bpf_prog_attach", "err %d errno %d\n", err, errno); + + tap_fd = create_tap("tap0"); + CHECK(tap_fd < 0, "create_tap", "tap_fd %d errno %d\n", tap_fd, errno); + err = ifup("tap0"); + CHECK(err, "ifup", "err %d errno %d\n", err, errno); + + for (i = 0; i < ARRAY_SIZE(tests); i++) { + struct bpf_flow_keys flow_keys = {}; + struct bpf_prog_test_run_attr tattr = {}; + __u32 key = 0; + + err = tx_tap(tap_fd, &tests[i].pkt, sizeof(tests[i].pkt)); + CHECK(err < 0, "tx_tap", "err %d errno %d\n", err, errno); + + err = bpf_map_lookup_elem(keys_fd, &key, &flow_keys); + CHECK_ATTR(err, tests[i].name, "bpf_map_lookup_elem %d\n", err); + + CHECK_ATTR(err, tests[i].name, "skb-less err %d\n", err); + CHECK_FLOW_KEYS(tests[i].name, flow_keys, tests[i].keys); + } + bpf_prog_detach(prog_fd, BPF_FLOW_DISSECTOR); bpf_object__close(obj); } diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector_load_bytes.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector_load_bytes.c new file mode 100644 index 000000000000..dc5ef155ec28 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector_load_bytes.c @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <test_progs.h> + +void test_flow_dissector_load_bytes(void) +{ + struct bpf_flow_keys flow_keys; + __u32 duration = 0, retval, size; + struct bpf_insn prog[] = { + // BPF_REG_1 - 1st argument: context + // BPF_REG_2 - 2nd argument: offset, start at first byte + BPF_MOV64_IMM(BPF_REG_2, 0), + // BPF_REG_3 - 3rd argument: destination, reserve byte on stack + BPF_ALU64_REG(BPF_MOV, BPF_REG_3, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, -1), + // BPF_REG_4 - 4th argument: copy one byte + BPF_MOV64_IMM(BPF_REG_4, 1), + // bpf_skb_load_bytes(ctx, sizeof(pkt_v4), ptr, 1) + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_skb_load_bytes), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2), + // if (ret == 0) return BPF_DROP (2) + BPF_MOV64_IMM(BPF_REG_0, BPF_DROP), + BPF_EXIT_INSN(), + // if (ret != 0) return BPF_OK (0) + BPF_MOV64_IMM(BPF_REG_0, BPF_OK), + BPF_EXIT_INSN(), + }; + int fd, err; + + /* make sure bpf_skb_load_bytes is not allowed from skb-less context + */ + fd = bpf_load_program(BPF_PROG_TYPE_FLOW_DISSECTOR, prog, + ARRAY_SIZE(prog), "GPL", 0, NULL, 0); + CHECK(fd < 0, + "flow_dissector-bpf_skb_load_bytes-load", + "fd %d errno %d\n", + fd, errno); + + err = bpf_prog_test_run(fd, 1, &pkt_v4, sizeof(pkt_v4), + &flow_keys, &size, &retval, &duration); + CHECK(size != sizeof(flow_keys) || err || retval != 1, + "flow_dissector-bpf_skb_load_bytes", + "err %d errno %d retval %d duration %d size %u/%zu\n", + err, errno, retval, duration, size, sizeof(flow_keys)); + + if (fd >= -1) + close(fd); +} diff --git a/tools/testing/selftests/bpf/prog_tests/get_stack_raw_tp.c b/tools/testing/selftests/bpf/prog_tests/get_stack_raw_tp.c index d7bb5beb1c57..c2a0a9d5591b 100644 --- a/tools/testing/selftests/bpf/prog_tests/get_stack_raw_tp.c +++ b/tools/testing/selftests/bpf/prog_tests/get_stack_raw_tp.c @@ -39,7 +39,7 @@ static int get_stack_print_output(void *data, int size) } else { for (i = 0; i < num_stack; i++) { ks = ksym_search(raw_data[i]); - if (strcmp(ks->name, nonjit_func) == 0) { + if (ks && (strcmp(ks->name, nonjit_func) == 0)) { found = true; break; } @@ -56,7 +56,7 @@ static int get_stack_print_output(void *data, int size) } else { for (i = 0; i < num_stack; i++) { ks = ksym_search(e->kern_stack[i]); - if (strcmp(ks->name, nonjit_func) == 0) { + if (ks && (strcmp(ks->name, nonjit_func) == 0)) { good_kern_stack = true; break; } diff --git a/tools/testing/selftests/bpf/prog_tests/global_data.c b/tools/testing/selftests/bpf/prog_tests/global_data.c new file mode 100644 index 000000000000..d011079fb0bf --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/global_data.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <test_progs.h> + +static void test_global_data_number(struct bpf_object *obj, __u32 duration) +{ + int i, err, map_fd; + uint64_t num; + + map_fd = bpf_find_map(__func__, obj, "result_number"); + if (map_fd < 0) { + error_cnt++; + return; + } + + struct { + char *name; + uint32_t key; + uint64_t num; + } tests[] = { + { "relocate .bss reference", 0, 0 }, + { "relocate .data reference", 1, 42 }, + { "relocate .rodata reference", 2, 24 }, + { "relocate .bss reference", 3, 0 }, + { "relocate .data reference", 4, 0xffeeff }, + { "relocate .rodata reference", 5, 0xabab }, + { "relocate .bss reference", 6, 1234 }, + { "relocate .bss reference", 7, 0 }, + { "relocate .rodata reference", 8, 0xab }, + { "relocate .rodata reference", 9, 0x1111111111111111 }, + { "relocate .rodata reference", 10, ~0 }, + }; + + for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++) { + err = bpf_map_lookup_elem(map_fd, &tests[i].key, &num); + CHECK(err || num != tests[i].num, tests[i].name, + "err %d result %lx expected %lx\n", + err, num, tests[i].num); + } +} + +static void test_global_data_string(struct bpf_object *obj, __u32 duration) +{ + int i, err, map_fd; + char str[32]; + + map_fd = bpf_find_map(__func__, obj, "result_string"); + if (map_fd < 0) { + error_cnt++; + return; + } + + struct { + char *name; + uint32_t key; + char str[32]; + } tests[] = { + { "relocate .rodata reference", 0, "abcdefghijklmnopqrstuvwxyz" }, + { "relocate .data reference", 1, "abcdefghijklmnopqrstuvwxyz" }, + { "relocate .bss reference", 2, "" }, + { "relocate .data reference", 3, "abcdexghijklmnopqrstuvwxyz" }, + { "relocate .bss reference", 4, "\0\0hello" }, + }; + + for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++) { + err = bpf_map_lookup_elem(map_fd, &tests[i].key, str); + CHECK(err || memcmp(str, tests[i].str, sizeof(str)), + tests[i].name, "err %d result \'%s\' expected \'%s\'\n", + err, str, tests[i].str); + } +} + +struct foo { + __u8 a; + __u32 b; + __u64 c; +}; + +static void test_global_data_struct(struct bpf_object *obj, __u32 duration) +{ + int i, err, map_fd; + struct foo val; + + map_fd = bpf_find_map(__func__, obj, "result_struct"); + if (map_fd < 0) { + error_cnt++; + return; + } + + struct { + char *name; + uint32_t key; + struct foo val; + } tests[] = { + { "relocate .rodata reference", 0, { 42, 0xfefeefef, 0x1111111111111111ULL, } }, + { "relocate .bss reference", 1, { } }, + { "relocate .rodata reference", 2, { } }, + { "relocate .data reference", 3, { 41, 0xeeeeefef, 0x2111111111111111ULL, } }, + }; + + for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++) { + err = bpf_map_lookup_elem(map_fd, &tests[i].key, &val); + CHECK(err || memcmp(&val, &tests[i].val, sizeof(val)), + tests[i].name, "err %d result { %u, %u, %llu } expected { %u, %u, %llu }\n", + err, val.a, val.b, val.c, tests[i].val.a, tests[i].val.b, tests[i].val.c); + } +} + +static void test_global_data_rdonly(struct bpf_object *obj, __u32 duration) +{ + int err = -ENOMEM, map_fd, zero = 0; + struct bpf_map *map; + __u8 *buff; + + map = bpf_object__find_map_by_name(obj, "test_glo.rodata"); + if (!map || !bpf_map__is_internal(map)) { + error_cnt++; + return; + } + + map_fd = bpf_map__fd(map); + if (map_fd < 0) { + error_cnt++; + return; + } + + buff = malloc(bpf_map__def(map)->value_size); + if (buff) + err = bpf_map_update_elem(map_fd, &zero, buff, 0); + free(buff); + CHECK(!err || errno != EPERM, "test .rodata read-only map", + "err %d errno %d\n", err, errno); +} + +void test_global_data(void) +{ + const char *file = "./test_global_data.o"; + __u32 duration = 0, retval; + struct bpf_object *obj; + int err, prog_fd; + + err = bpf_prog_load(file, BPF_PROG_TYPE_SCHED_CLS, &obj, &prog_fd); + if (CHECK(err, "load program", "error %d loading %s\n", err, file)) + return; + + err = bpf_prog_test_run(prog_fd, 1, &pkt_v4, sizeof(pkt_v4), + NULL, NULL, &retval, &duration); + CHECK(err || retval, "pass global data run", + "err %d errno %d retval %d duration %d\n", + err, errno, retval, duration); + + test_global_data_number(obj, duration); + test_global_data_string(obj, duration); + test_global_data_struct(obj, duration); + test_global_data_rdonly(obj, duration); + + bpf_object__close(obj); +} diff --git a/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c new file mode 100644 index 000000000000..9807336a3016 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_reject_nbd_invalid.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <test_progs.h> +#include <linux/nbd.h> + +void test_raw_tp_writable_reject_nbd_invalid(void) +{ + __u32 duration = 0; + char error[4096]; + int bpf_fd = -1, tp_fd = -1; + + const struct bpf_insn program[] = { + /* r6 is our tp buffer */ + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + /* one byte beyond the end of the nbd_request struct */ + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_6, + sizeof(struct nbd_request)), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr load_attr = { + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .license = "GPL v2", + .insns = program, + .insns_cnt = sizeof(program) / sizeof(struct bpf_insn), + .log_level = 2, + }; + + bpf_fd = bpf_load_program_xattr(&load_attr, error, sizeof(error)); + if (CHECK(bpf_fd < 0, "bpf_raw_tracepoint_writable load", + "failed: %d errno %d\n", bpf_fd, errno)) + return; + + tp_fd = bpf_raw_tracepoint_open("nbd_send_request", bpf_fd); + if (CHECK(tp_fd >= 0, "bpf_raw_tracepoint_writable open", + "erroneously succeeded\n")) + goto out_bpffd; + + close(tp_fd); +out_bpffd: + close(bpf_fd); +} diff --git a/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c new file mode 100644 index 000000000000..5c45424cac5f --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/raw_tp_writable_test_run.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <test_progs.h> +#include <linux/nbd.h> + +void test_raw_tp_writable_test_run(void) +{ + __u32 duration = 0; + char error[4096]; + + const struct bpf_insn trace_program[] = { + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_6, 0), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_STX_MEM(BPF_W, BPF_REG_6, BPF_REG_0, 0), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr load_attr = { + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .license = "GPL v2", + .insns = trace_program, + .insns_cnt = sizeof(trace_program) / sizeof(struct bpf_insn), + .log_level = 2, + }; + + int bpf_fd = bpf_load_program_xattr(&load_attr, error, sizeof(error)); + if (CHECK(bpf_fd < 0, "bpf_raw_tracepoint_writable loaded", + "failed: %d errno %d\n", bpf_fd, errno)) + return; + + const struct bpf_insn skb_program[] = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }; + + struct bpf_load_program_attr skb_load_attr = { + .prog_type = BPF_PROG_TYPE_SOCKET_FILTER, + .license = "GPL v2", + .insns = skb_program, + .insns_cnt = sizeof(skb_program) / sizeof(struct bpf_insn), + }; + + int filter_fd = + bpf_load_program_xattr(&skb_load_attr, error, sizeof(error)); + if (CHECK(filter_fd < 0, "test_program_loaded", "failed: %d errno %d\n", + filter_fd, errno)) + goto out_bpffd; + + int tp_fd = bpf_raw_tracepoint_open("bpf_test_finish", bpf_fd); + if (CHECK(tp_fd < 0, "bpf_raw_tracepoint_writable opened", + "failed: %d errno %d\n", tp_fd, errno)) + goto out_filterfd; + + char test_skb[128] = { + 0, + }; + + __u32 prog_ret; + int err = bpf_prog_test_run(filter_fd, 1, test_skb, sizeof(test_skb), 0, + 0, &prog_ret, 0); + CHECK(err != 42, "test_run", + "tracepoint did not modify return value\n"); + CHECK(prog_ret != 0, "test_run_ret", + "socket_filter did not return 0\n"); + + close(tp_fd); + + err = bpf_prog_test_run(filter_fd, 1, test_skb, sizeof(test_skb), 0, 0, + &prog_ret, 0); + CHECK(err != 0, "test_run_notrace", + "test_run failed with %d errno %d\n", err, errno); + CHECK(prog_ret != 0, "test_run_ret_notrace", + "socket_filter did not return 0\n"); + +out_filterfd: + close(filter_fd); +out_bpffd: + close(bpf_fd); +} diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c new file mode 100644 index 000000000000..e95baa32e277 --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <test_progs.h> + +void test_skb_ctx(void) +{ + struct __sk_buff skb = { + .cb[0] = 1, + .cb[1] = 2, + .cb[2] = 3, + .cb[3] = 4, + .cb[4] = 5, + .priority = 6, + }; + struct bpf_prog_test_run_attr tattr = { + .data_in = &pkt_v4, + .data_size_in = sizeof(pkt_v4), + .ctx_in = &skb, + .ctx_size_in = sizeof(skb), + .ctx_out = &skb, + .ctx_size_out = sizeof(skb), + }; + struct bpf_object *obj; + int err; + int i; + + err = bpf_prog_load("./test_skb_ctx.o", BPF_PROG_TYPE_SCHED_CLS, &obj, + &tattr.prog_fd); + if (CHECK_ATTR(err, "load", "err %d errno %d\n", err, errno)) + return; + + /* ctx_in != NULL, ctx_size_in == 0 */ + + tattr.ctx_size_in = 0; + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(err == 0, "ctx_size_in", "err %d errno %d\n", err, errno); + tattr.ctx_size_in = sizeof(skb); + + /* ctx_out != NULL, ctx_size_out == 0 */ + + tattr.ctx_size_out = 0; + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(err == 0, "ctx_size_out", "err %d errno %d\n", err, errno); + tattr.ctx_size_out = sizeof(skb); + + /* non-zero [len, tc_index] fields should be rejected*/ + + skb.len = 1; + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(err == 0, "len", "err %d errno %d\n", err, errno); + skb.len = 0; + + skb.tc_index = 1; + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(err == 0, "tc_index", "err %d errno %d\n", err, errno); + skb.tc_index = 0; + + /* non-zero [hash, sk] fields should be rejected */ + + skb.hash = 1; + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(err == 0, "hash", "err %d errno %d\n", err, errno); + skb.hash = 0; + + skb.sk = (struct bpf_sock *)1; + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(err == 0, "sk", "err %d errno %d\n", err, errno); + skb.sk = 0; + + err = bpf_prog_test_run_xattr(&tattr); + CHECK_ATTR(err != 0 || tattr.retval, + "run", + "err %d errno %d retval %d\n", + err, errno, tattr.retval); + + CHECK_ATTR(tattr.ctx_size_out != sizeof(skb), + "ctx_size_out", + "incorrect output size, want %lu have %u\n", + sizeof(skb), tattr.ctx_size_out); + + for (i = 0; i < 5; i++) + CHECK_ATTR(skb.cb[i] != i + 2, + "ctx_out_cb", + "skb->cb[i] == %d, expected %d\n", + skb.cb[i], i + 2); + CHECK_ATTR(skb.priority != 7, + "ctx_out_priority", + "skb->priority == %d, expected %d\n", + skb.priority, 7); +} diff --git a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c index 8a114bb1c379..1c1a2f75f3d8 100644 --- a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c +++ b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c @@ -1,13 +1,25 @@ // SPDX-License-Identifier: GPL-2.0 #include <test_progs.h> +static __u64 read_perf_max_sample_freq(void) +{ + __u64 sample_freq = 5000; /* fallback to 5000 on error */ + FILE *f; + + f = fopen("/proc/sys/kernel/perf_event_max_sample_rate", "r"); + if (f == NULL) + return sample_freq; + fscanf(f, "%llu", &sample_freq); + fclose(f); + return sample_freq; +} + void test_stacktrace_build_id_nmi(void) { int control_map_fd, stackid_hmap_fd, stackmap_fd, stack_amap_fd; const char *file = "./test_stacktrace_build_id.o"; int err, pmu_fd, prog_fd; struct perf_event_attr attr = { - .sample_freq = 5000, .freq = 1, .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES, @@ -20,6 +32,8 @@ void test_stacktrace_build_id_nmi(void) int build_id_matches = 0; int retry = 1; + attr.sample_freq = read_perf_max_sample_freq(); + retry: err = bpf_prog_load(file, BPF_PROG_TYPE_PERF_EVENT, &obj, &prog_fd); if (CHECK(err, "prog_load", "err %d errno %d\n", err, errno)) diff --git a/tools/testing/selftests/bpf/prog_tests/task_fd_query_tp.c b/tools/testing/selftests/bpf/prog_tests/task_fd_query_tp.c index d636a4f39476..f9b70e81682b 100644 --- a/tools/testing/selftests/bpf/prog_tests/task_fd_query_tp.c +++ b/tools/testing/selftests/bpf/prog_tests/task_fd_query_tp.c @@ -9,7 +9,7 @@ static void test_task_fd_query_tp_core(const char *probe_name, struct perf_event_attr attr = {}; __u64 probe_offset, probe_addr; __u32 len, prog_id, fd_type; - struct bpf_object *obj; + struct bpf_object *obj = NULL; __u32 duration = 0; char buf[256]; diff --git a/tools/testing/selftests/bpf/prog_tests/tp_attach_query.c b/tools/testing/selftests/bpf/prog_tests/tp_attach_query.c index a2f476f91637..fb095e5cd9af 100644 --- a/tools/testing/selftests/bpf/prog_tests/tp_attach_query.c +++ b/tools/testing/selftests/bpf/prog_tests/tp_attach_query.c @@ -13,6 +13,9 @@ void test_tp_attach_query(void) struct bpf_prog_info prog_info; char buf[256]; + for (i = 0; i < num_progs; i++) + obj[i] = NULL; + snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/sched/sched_switch/id"); efd = open(buf, O_RDONLY, 0); diff --git a/tools/testing/selftests/bpf/progs/bpf_flow.c b/tools/testing/selftests/bpf/progs/bpf_flow.c index 284660f5aa95..81ad9a0b29d0 100644 --- a/tools/testing/selftests/bpf/progs/bpf_flow.c +++ b/tools/testing/selftests/bpf/progs/bpf_flow.c @@ -64,6 +64,25 @@ struct bpf_map_def SEC("maps") jmp_table = { .max_entries = 8 }; +struct bpf_map_def SEC("maps") last_dissection = { + .type = BPF_MAP_TYPE_ARRAY, + .key_size = sizeof(__u32), + .value_size = sizeof(struct bpf_flow_keys), + .max_entries = 1, +}; + +static __always_inline int export_flow_keys(struct bpf_flow_keys *keys, + int ret) +{ + struct bpf_flow_keys *val; + __u32 key = 0; + + val = bpf_map_lookup_elem(&last_dissection, &key); + if (val) + memcpy(val, keys, sizeof(*val)); + return ret; +} + static __always_inline void *bpf_flow_dissect_get_header(struct __sk_buff *skb, __u16 hdr_size, void *buffer) @@ -92,7 +111,6 @@ static __always_inline int parse_eth_proto(struct __sk_buff *skb, __be16 proto) { struct bpf_flow_keys *keys = skb->flow_keys; - keys->n_proto = proto; switch (proto) { case bpf_htons(ETH_P_IP): bpf_tail_call(skb, &jmp_table, IP); @@ -110,19 +128,18 @@ static __always_inline int parse_eth_proto(struct __sk_buff *skb, __be16 proto) break; default: /* Protocol not supported */ - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); } - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); } SEC("flow_dissector") int _dissect(struct __sk_buff *skb) { - if (!skb->vlan_present) - return parse_eth_proto(skb, skb->protocol); - else - return parse_eth_proto(skb, skb->vlan_proto); + struct bpf_flow_keys *keys = skb->flow_keys; + + return parse_eth_proto(skb, keys->n_proto); } /* Parses on IPPROTO_* */ @@ -141,8 +158,8 @@ static __always_inline int parse_ip_proto(struct __sk_buff *skb, __u8 proto) case IPPROTO_ICMP: icmp = bpf_flow_dissect_get_header(skb, sizeof(*icmp), &_icmp); if (!icmp) - return BPF_DROP; - return BPF_OK; + return export_flow_keys(keys, BPF_DROP); + return export_flow_keys(keys, BPF_OK); case IPPROTO_IPIP: keys->is_encap = true; return parse_eth_proto(skb, bpf_htons(ETH_P_IP)); @@ -152,11 +169,11 @@ static __always_inline int parse_ip_proto(struct __sk_buff *skb, __u8 proto) case IPPROTO_GRE: gre = bpf_flow_dissect_get_header(skb, sizeof(*gre), &_gre); if (!gre) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); if (bpf_htons(gre->flags & GRE_VERSION)) /* Only inspect standard GRE packets with version 0 */ - return BPF_OK; + return export_flow_keys(keys, BPF_OK); keys->thoff += sizeof(*gre); /* Step over GRE Flags and Proto */ if (GRE_IS_CSUM(gre->flags)) @@ -172,7 +189,7 @@ static __always_inline int parse_ip_proto(struct __sk_buff *skb, __u8 proto) eth = bpf_flow_dissect_get_header(skb, sizeof(*eth), &_eth); if (!eth) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); keys->thoff += sizeof(*eth); @@ -183,31 +200,31 @@ static __always_inline int parse_ip_proto(struct __sk_buff *skb, __u8 proto) case IPPROTO_TCP: tcp = bpf_flow_dissect_get_header(skb, sizeof(*tcp), &_tcp); if (!tcp) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); if (tcp->doff < 5) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); if ((__u8 *)tcp + (tcp->doff << 2) > data_end) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); keys->sport = tcp->source; keys->dport = tcp->dest; - return BPF_OK; + return export_flow_keys(keys, BPF_OK); case IPPROTO_UDP: case IPPROTO_UDPLITE: udp = bpf_flow_dissect_get_header(skb, sizeof(*udp), &_udp); if (!udp) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); keys->sport = udp->source; keys->dport = udp->dest; - return BPF_OK; + return export_flow_keys(keys, BPF_OK); default: - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); } - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); } static __always_inline int parse_ipv6_proto(struct __sk_buff *skb, __u8 nexthdr) @@ -227,7 +244,7 @@ static __always_inline int parse_ipv6_proto(struct __sk_buff *skb, __u8 nexthdr) return parse_ip_proto(skb, nexthdr); } - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); } PROG(IP)(struct __sk_buff *skb) @@ -240,11 +257,11 @@ PROG(IP)(struct __sk_buff *skb) iph = bpf_flow_dissect_get_header(skb, sizeof(*iph), &_iph); if (!iph) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); /* IP header cannot be smaller than 20 bytes */ if (iph->ihl < 5) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); keys->addr_proto = ETH_P_IP; keys->ipv4_src = iph->saddr; @@ -252,7 +269,7 @@ PROG(IP)(struct __sk_buff *skb) keys->thoff += iph->ihl << 2; if (data + keys->thoff > data_end) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); if (iph->frag_off & bpf_htons(IP_MF | IP_OFFSET)) { keys->is_frag = true; @@ -266,7 +283,7 @@ PROG(IP)(struct __sk_buff *skb) } if (done) - return BPF_OK; + return export_flow_keys(keys, BPF_OK); return parse_ip_proto(skb, iph->protocol); } @@ -278,7 +295,7 @@ PROG(IPV6)(struct __sk_buff *skb) ip6h = bpf_flow_dissect_get_header(skb, sizeof(*ip6h), &_ip6h); if (!ip6h) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); keys->addr_proto = ETH_P_IPV6; memcpy(&keys->ipv6_src, &ip6h->saddr, 2*sizeof(ip6h->saddr)); @@ -290,11 +307,12 @@ PROG(IPV6)(struct __sk_buff *skb) PROG(IPV6OP)(struct __sk_buff *skb) { + struct bpf_flow_keys *keys = skb->flow_keys; struct ipv6_opt_hdr *ip6h, _ip6h; ip6h = bpf_flow_dissect_get_header(skb, sizeof(*ip6h), &_ip6h); if (!ip6h) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); /* hlen is in 8-octets and does not include the first 8 bytes * of the header @@ -311,7 +329,7 @@ PROG(IPV6FR)(struct __sk_buff *skb) fragh = bpf_flow_dissect_get_header(skb, sizeof(*fragh), &_fragh); if (!fragh) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); keys->thoff += sizeof(*fragh); keys->is_frag = true; @@ -323,48 +341,46 @@ PROG(IPV6FR)(struct __sk_buff *skb) PROG(MPLS)(struct __sk_buff *skb) { + struct bpf_flow_keys *keys = skb->flow_keys; struct mpls_label *mpls, _mpls; mpls = bpf_flow_dissect_get_header(skb, sizeof(*mpls), &_mpls); if (!mpls) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); - return BPF_OK; + return export_flow_keys(keys, BPF_OK); } PROG(VLAN)(struct __sk_buff *skb) { struct bpf_flow_keys *keys = skb->flow_keys; struct vlan_hdr *vlan, _vlan; - __be16 proto; - - /* Peek back to see if single or double-tagging */ - if (bpf_skb_load_bytes(skb, keys->thoff - sizeof(proto), &proto, - sizeof(proto))) - return BPF_DROP; /* Account for double-tagging */ - if (proto == bpf_htons(ETH_P_8021AD)) { + if (keys->n_proto == bpf_htons(ETH_P_8021AD)) { vlan = bpf_flow_dissect_get_header(skb, sizeof(*vlan), &_vlan); if (!vlan) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); if (vlan->h_vlan_encapsulated_proto != bpf_htons(ETH_P_8021Q)) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); + keys->nhoff += sizeof(*vlan); keys->thoff += sizeof(*vlan); } vlan = bpf_flow_dissect_get_header(skb, sizeof(*vlan), &_vlan); if (!vlan) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); + keys->nhoff += sizeof(*vlan); keys->thoff += sizeof(*vlan); /* Only allow 8021AD + 8021Q double tagging and no triple tagging.*/ if (vlan->h_vlan_encapsulated_proto == bpf_htons(ETH_P_8021AD) || vlan->h_vlan_encapsulated_proto == bpf_htons(ETH_P_8021Q)) - return BPF_DROP; + return export_flow_keys(keys, BPF_DROP); + keys->n_proto = vlan->h_vlan_encapsulated_proto; return parse_eth_proto(skb, vlan->h_vlan_encapsulated_proto); } diff --git a/tools/testing/selftests/bpf/progs/test_global_data.c b/tools/testing/selftests/bpf/progs/test_global_data.c new file mode 100644 index 000000000000..5ab14e941980 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_global_data.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Isovalent, Inc. + +#include <linux/bpf.h> +#include <linux/pkt_cls.h> +#include <string.h> + +#include "bpf_helpers.h" + +struct bpf_map_def SEC("maps") result_number = { + .type = BPF_MAP_TYPE_ARRAY, + .key_size = sizeof(__u32), + .value_size = sizeof(__u64), + .max_entries = 11, +}; + +struct bpf_map_def SEC("maps") result_string = { + .type = BPF_MAP_TYPE_ARRAY, + .key_size = sizeof(__u32), + .value_size = 32, + .max_entries = 5, +}; + +struct foo { + __u8 a; + __u32 b; + __u64 c; +}; + +struct bpf_map_def SEC("maps") result_struct = { + .type = BPF_MAP_TYPE_ARRAY, + .key_size = sizeof(__u32), + .value_size = sizeof(struct foo), + .max_entries = 5, +}; + +/* Relocation tests for __u64s. */ +static __u64 num0; +static __u64 num1 = 42; +static const __u64 num2 = 24; +static __u64 num3 = 0; +static __u64 num4 = 0xffeeff; +static const __u64 num5 = 0xabab; +static const __u64 num6 = 0xab; + +/* Relocation tests for strings. */ +static const char str0[32] = "abcdefghijklmnopqrstuvwxyz"; +static char str1[32] = "abcdefghijklmnopqrstuvwxyz"; +static char str2[32]; + +/* Relocation tests for structs. */ +static const struct foo struct0 = { + .a = 42, + .b = 0xfefeefef, + .c = 0x1111111111111111ULL, +}; +static struct foo struct1; +static const struct foo struct2; +static struct foo struct3 = { + .a = 41, + .b = 0xeeeeefef, + .c = 0x2111111111111111ULL, +}; + +#define test_reloc(map, num, var) \ + do { \ + __u32 key = num; \ + bpf_map_update_elem(&result_##map, &key, var, 0); \ + } while (0) + +SEC("static_data_load") +int load_static_data(struct __sk_buff *skb) +{ + static const __u64 bar = ~0; + + test_reloc(number, 0, &num0); + test_reloc(number, 1, &num1); + test_reloc(number, 2, &num2); + test_reloc(number, 3, &num3); + test_reloc(number, 4, &num4); + test_reloc(number, 5, &num5); + num4 = 1234; + test_reloc(number, 6, &num4); + test_reloc(number, 7, &num0); + test_reloc(number, 8, &num6); + + test_reloc(string, 0, str0); + test_reloc(string, 1, str1); + test_reloc(string, 2, str2); + str1[5] = 'x'; + test_reloc(string, 3, str1); + __builtin_memcpy(&str2[2], "hello", sizeof("hello")); + test_reloc(string, 4, str2); + + test_reloc(struct, 0, &struct0); + test_reloc(struct, 1, &struct1); + test_reloc(struct, 2, &struct2); + test_reloc(struct, 3, &struct3); + + test_reloc(number, 9, &struct0.c); + test_reloc(number, 10, &bar); + + return TC_ACT_OK; +} + +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/test_jhash.h b/tools/testing/selftests/bpf/progs/test_jhash.h new file mode 100644 index 000000000000..3d12c11a8d47 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_jhash.h @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Facebook + +typedef unsigned int u32; + +static __attribute__((always_inline)) u32 rol32(u32 word, unsigned int shift) +{ + return (word << shift) | (word >> ((-shift) & 31)); +} + +#define __jhash_mix(a, b, c) \ +{ \ + a -= c; a ^= rol32(c, 4); c += b; \ + b -= a; b ^= rol32(a, 6); a += c; \ + c -= b; c ^= rol32(b, 8); b += a; \ + a -= c; a ^= rol32(c, 16); c += b; \ + b -= a; b ^= rol32(a, 19); a += c; \ + c -= b; c ^= rol32(b, 4); b += a; \ +} + +#define __jhash_final(a, b, c) \ +{ \ + c ^= b; c -= rol32(b, 14); \ + a ^= c; a -= rol32(c, 11); \ + b ^= a; b -= rol32(a, 25); \ + c ^= b; c -= rol32(b, 16); \ + a ^= c; a -= rol32(c, 4); \ + b ^= a; b -= rol32(a, 14); \ + c ^= b; c -= rol32(b, 24); \ +} + +#define JHASH_INITVAL 0xdeadbeef + +static ATTR +u32 jhash(const void *key, u32 length, u32 initval) +{ + u32 a, b, c; + const unsigned char *k = key; + + a = b = c = JHASH_INITVAL + length + initval; + + while (length > 12) { + a += *(volatile u32 *)(k); + b += *(volatile u32 *)(k + 4); + c += *(volatile u32 *)(k + 8); + __jhash_mix(a, b, c); + length -= 12; + k += 12; + } + switch (length) { + case 12: c += (u32)k[11]<<24; + case 11: c += (u32)k[10]<<16; + case 10: c += (u32)k[9]<<8; + case 9: c += k[8]; + case 8: b += (u32)k[7]<<24; + case 7: b += (u32)k[6]<<16; + case 6: b += (u32)k[5]<<8; + case 5: b += k[4]; + case 4: a += (u32)k[3]<<24; + case 3: a += (u32)k[2]<<16; + case 2: a += (u32)k[1]<<8; + case 1: a += k[0]; + c ^= a; + __jhash_final(a, b, c); + case 0: /* Nothing left to add */ + break; + } + + return c; +} diff --git a/tools/testing/selftests/bpf/progs/test_skb_ctx.c b/tools/testing/selftests/bpf/progs/test_skb_ctx.c new file mode 100644 index 000000000000..7a80960d7df1 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_skb_ctx.c @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/bpf.h> +#include "bpf_helpers.h" + +int _version SEC("version") = 1; +char _license[] SEC("license") = "GPL"; + +SEC("skb_ctx") +int process(struct __sk_buff *skb) +{ + #pragma clang loop unroll(full) + for (int i = 0; i < 5; i++) { + if (skb->cb[i] != i + 1) + return 1; + skb->cb[i]++; + } + skb->priority++; + + return 0; +} diff --git a/tools/testing/selftests/bpf/progs/test_sock_fields_kern.c b/tools/testing/selftests/bpf/progs/test_sock_fields_kern.c index 37328f148538..1c39e4ccb7f1 100644 --- a/tools/testing/selftests/bpf/progs/test_sock_fields_kern.c +++ b/tools/testing/selftests/bpf/progs/test_sock_fields_kern.c @@ -55,6 +55,31 @@ struct bpf_map_def SEC("maps") linum_map = { .max_entries = __NR_BPF_LINUM_ARRAY_IDX, }; +struct bpf_spinlock_cnt { + struct bpf_spin_lock lock; + __u32 cnt; +}; + +struct bpf_map_def SEC("maps") sk_pkt_out_cnt = { + .type = BPF_MAP_TYPE_SK_STORAGE, + .key_size = sizeof(int), + .value_size = sizeof(struct bpf_spinlock_cnt), + .max_entries = 0, + .map_flags = BPF_F_NO_PREALLOC, +}; + +BPF_ANNOTATE_KV_PAIR(sk_pkt_out_cnt, int, struct bpf_spinlock_cnt); + +struct bpf_map_def SEC("maps") sk_pkt_out_cnt10 = { + .type = BPF_MAP_TYPE_SK_STORAGE, + .key_size = sizeof(int), + .value_size = sizeof(struct bpf_spinlock_cnt), + .max_entries = 0, + .map_flags = BPF_F_NO_PREALLOC, +}; + +BPF_ANNOTATE_KV_PAIR(sk_pkt_out_cnt10, int, struct bpf_spinlock_cnt); + static bool is_loopback6(__u32 *a6) { return !a6[0] && !a6[1] && !a6[2] && a6[3] == bpf_htonl(1); @@ -120,7 +145,9 @@ static void tpcpy(struct bpf_tcp_sock *dst, SEC("cgroup_skb/egress") int egress_read_sock_fields(struct __sk_buff *skb) { + struct bpf_spinlock_cnt cli_cnt_init = { .lock = 0, .cnt = 0xeB9F }; __u32 srv_idx = ADDR_SRV_IDX, cli_idx = ADDR_CLI_IDX, result_idx; + struct bpf_spinlock_cnt *pkt_out_cnt, *pkt_out_cnt10; struct sockaddr_in6 *srv_sa6, *cli_sa6; struct bpf_tcp_sock *tp, *tp_ret; struct bpf_sock *sk, *sk_ret; @@ -161,6 +188,32 @@ int egress_read_sock_fields(struct __sk_buff *skb) skcpy(sk_ret, sk); tpcpy(tp_ret, tp); + if (result_idx == EGRESS_SRV_IDX) { + /* The userspace has created it for srv sk */ + pkt_out_cnt = bpf_sk_storage_get(&sk_pkt_out_cnt, sk, 0, 0); + pkt_out_cnt10 = bpf_sk_storage_get(&sk_pkt_out_cnt10, sk, + 0, 0); + } else { + pkt_out_cnt = bpf_sk_storage_get(&sk_pkt_out_cnt, sk, + &cli_cnt_init, + BPF_SK_STORAGE_GET_F_CREATE); + pkt_out_cnt10 = bpf_sk_storage_get(&sk_pkt_out_cnt10, + sk, &cli_cnt_init, + BPF_SK_STORAGE_GET_F_CREATE); + } + + if (!pkt_out_cnt || !pkt_out_cnt10) + RETURN; + + /* Even both cnt and cnt10 have lock defined in their BTF, + * intentionally one cnt takes lock while one does not + * as a test for the spinlock support in BPF_MAP_TYPE_SK_STORAGE. + */ + pkt_out_cnt->cnt += 1; + bpf_spin_lock(&pkt_out_cnt10->lock); + pkt_out_cnt10->cnt += 10; + bpf_spin_unlock(&pkt_out_cnt10->lock); + RETURN; } diff --git a/tools/testing/selftests/bpf/progs/test_sysctl_prog.c b/tools/testing/selftests/bpf/progs/test_sysctl_prog.c new file mode 100644 index 000000000000..a295cad805d7 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_sysctl_prog.c @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Facebook + +#include <stdint.h> +#include <string.h> + +#include <linux/stddef.h> +#include <linux/bpf.h> + +#include "bpf_helpers.h" +#include "bpf_util.h" + +/* Max supported length of a string with unsigned long in base 10 (pow2 - 1). */ +#define MAX_ULONG_STR_LEN 0xF + +/* Max supported length of sysctl value string (pow2). */ +#define MAX_VALUE_STR_LEN 0x40 + +static __always_inline int is_tcp_mem(struct bpf_sysctl *ctx) +{ + char tcp_mem_name[] = "net/ipv4/tcp_mem"; + unsigned char i; + char name[64]; + int ret; + + memset(name, 0, sizeof(name)); + ret = bpf_sysctl_get_name(ctx, name, sizeof(name), 0); + if (ret < 0 || ret != sizeof(tcp_mem_name) - 1) + return 0; + +#pragma clang loop unroll(full) + for (i = 0; i < sizeof(tcp_mem_name); ++i) + if (name[i] != tcp_mem_name[i]) + return 0; + + return 1; +} + +SEC("cgroup/sysctl") +int sysctl_tcp_mem(struct bpf_sysctl *ctx) +{ + unsigned long tcp_mem[3] = {0, 0, 0}; + char value[MAX_VALUE_STR_LEN]; + unsigned char i, off = 0; + int ret; + + if (ctx->write) + return 0; + + if (!is_tcp_mem(ctx)) + return 0; + + ret = bpf_sysctl_get_current_value(ctx, value, MAX_VALUE_STR_LEN); + if (ret < 0 || ret >= MAX_VALUE_STR_LEN) + return 0; + +#pragma clang loop unroll(full) + for (i = 0; i < ARRAY_SIZE(tcp_mem); ++i) { + ret = bpf_strtoul(value + off, MAX_ULONG_STR_LEN, 0, + tcp_mem + i); + if (ret <= 0 || ret > MAX_ULONG_STR_LEN) + return 0; + off += ret & MAX_ULONG_STR_LEN; + } + + + return tcp_mem[0] < tcp_mem[1] && tcp_mem[1] < tcp_mem[2]; +} + +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/test_tc_edt.c b/tools/testing/selftests/bpf/progs/test_tc_edt.c new file mode 100644 index 000000000000..3af64c470d64 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_tc_edt.c @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdint.h> +#include <linux/bpf.h> +#include <linux/if_ether.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/pkt_cls.h> +#include <linux/tcp.h> +#include "bpf_helpers.h" +#include "bpf_endian.h" + +/* the maximum delay we are willing to add (drop packets beyond that) */ +#define TIME_HORIZON_NS (2000 * 1000 * 1000) +#define NS_PER_SEC 1000000000 +#define ECN_HORIZON_NS 5000000 +#define THROTTLE_RATE_BPS (5 * 1000 * 1000) + +/* flow_key => last_tstamp timestamp used */ +struct bpf_map_def SEC("maps") flow_map = { + .type = BPF_MAP_TYPE_HASH, + .key_size = sizeof(uint32_t), + .value_size = sizeof(uint64_t), + .max_entries = 1, +}; + +static inline int throttle_flow(struct __sk_buff *skb) +{ + int key = 0; + uint64_t *last_tstamp = bpf_map_lookup_elem(&flow_map, &key); + uint64_t delay_ns = ((uint64_t)skb->len) * NS_PER_SEC / + THROTTLE_RATE_BPS; + uint64_t now = bpf_ktime_get_ns(); + uint64_t tstamp, next_tstamp = 0; + + if (last_tstamp) + next_tstamp = *last_tstamp + delay_ns; + + tstamp = skb->tstamp; + if (tstamp < now) + tstamp = now; + + /* should we throttle? */ + if (next_tstamp <= tstamp) { + if (bpf_map_update_elem(&flow_map, &key, &tstamp, BPF_ANY)) + return TC_ACT_SHOT; + return TC_ACT_OK; + } + + /* do not queue past the time horizon */ + if (next_tstamp - now >= TIME_HORIZON_NS) + return TC_ACT_SHOT; + + /* set ecn bit, if needed */ + if (next_tstamp - now >= ECN_HORIZON_NS) + bpf_skb_ecn_set_ce(skb); + + if (bpf_map_update_elem(&flow_map, &key, &next_tstamp, BPF_EXIST)) + return TC_ACT_SHOT; + skb->tstamp = next_tstamp; + + return TC_ACT_OK; +} + +static inline int handle_tcp(struct __sk_buff *skb, struct tcphdr *tcp) +{ + void *data_end = (void *)(long)skb->data_end; + + /* drop malformed packets */ + if ((void *)(tcp + 1) > data_end) + return TC_ACT_SHOT; + + if (tcp->dest == bpf_htons(9000)) + return throttle_flow(skb); + + return TC_ACT_OK; +} + +static inline int handle_ipv4(struct __sk_buff *skb) +{ + void *data_end = (void *)(long)skb->data_end; + void *data = (void *)(long)skb->data; + struct iphdr *iph; + uint32_t ihl; + + /* drop malformed packets */ + if (data + sizeof(struct ethhdr) > data_end) + return TC_ACT_SHOT; + iph = (struct iphdr *)(data + sizeof(struct ethhdr)); + if ((void *)(iph + 1) > data_end) + return TC_ACT_SHOT; + ihl = iph->ihl * 4; + if (((void *)iph) + ihl > data_end) + return TC_ACT_SHOT; + + if (iph->protocol == IPPROTO_TCP) + return handle_tcp(skb, (struct tcphdr *)(((void *)iph) + ihl)); + + return TC_ACT_OK; +} + +SEC("cls_test") int tc_prog(struct __sk_buff *skb) +{ + if (skb->protocol == bpf_htons(ETH_P_IP)) + return handle_ipv4(skb); + + return TC_ACT_OK; +} + +char __license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/test_tc_tunnel.c b/tools/testing/selftests/bpf/progs/test_tc_tunnel.c new file mode 100644 index 000000000000..74370e7e286d --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_tc_tunnel.c @@ -0,0 +1,536 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* In-place tunneling */ + +#include <stdbool.h> +#include <string.h> + +#include <linux/stddef.h> +#include <linux/bpf.h> +#include <linux/if_ether.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/mpls.h> +#include <linux/tcp.h> +#include <linux/udp.h> +#include <linux/pkt_cls.h> +#include <linux/types.h> + +#include "bpf_endian.h" +#include "bpf_helpers.h" + +static const int cfg_port = 8000; + +static const int cfg_udp_src = 20000; + +#define UDP_PORT 5555 +#define MPLS_OVER_UDP_PORT 6635 +#define ETH_OVER_UDP_PORT 7777 + +/* MPLS label 1000 with S bit (last label) set and ttl of 255. */ +static const __u32 mpls_label = __bpf_constant_htonl(1000 << 12 | + MPLS_LS_S_MASK | 0xff); + +struct gre_hdr { + __be16 flags; + __be16 protocol; +} __attribute__((packed)); + +union l4hdr { + struct udphdr udp; + struct gre_hdr gre; +}; + +struct v4hdr { + struct iphdr ip; + union l4hdr l4hdr; + __u8 pad[16]; /* enough space for L2 header */ +} __attribute__((packed)); + +struct v6hdr { + struct ipv6hdr ip; + union l4hdr l4hdr; + __u8 pad[16]; /* enough space for L2 header */ +} __attribute__((packed)); + +static __always_inline void set_ipv4_csum(struct iphdr *iph) +{ + __u16 *iph16 = (__u16 *)iph; + __u32 csum; + int i; + + iph->check = 0; + +#pragma clang loop unroll(full) + for (i = 0, csum = 0; i < sizeof(*iph) >> 1; i++) + csum += *iph16++; + + iph->check = ~((csum & 0xffff) + (csum >> 16)); +} + +static __always_inline int encap_ipv4(struct __sk_buff *skb, __u8 encap_proto, + __u16 l2_proto) +{ + __u16 udp_dst = UDP_PORT; + struct iphdr iph_inner; + struct v4hdr h_outer; + struct tcphdr tcph; + int olen, l2_len; + int tcp_off; + __u64 flags; + + /* Most tests encapsulate a packet into a tunnel with the same + * network protocol, and derive the outer header fields from + * the inner header. + * + * The 6in4 case tests different inner and outer protocols. As + * the inner is ipv6, but the outer expects an ipv4 header as + * input, manually build a struct iphdr based on the ipv6hdr. + */ + if (encap_proto == IPPROTO_IPV6) { + const __u32 saddr = (192 << 24) | (168 << 16) | (1 << 8) | 1; + const __u32 daddr = (192 << 24) | (168 << 16) | (1 << 8) | 2; + struct ipv6hdr iph6_inner; + + /* Read the IPv6 header */ + if (bpf_skb_load_bytes(skb, ETH_HLEN, &iph6_inner, + sizeof(iph6_inner)) < 0) + return TC_ACT_OK; + + /* Derive the IPv4 header fields from the IPv6 header */ + memset(&iph_inner, 0, sizeof(iph_inner)); + iph_inner.version = 4; + iph_inner.ihl = 5; + iph_inner.tot_len = bpf_htons(sizeof(iph6_inner) + + bpf_ntohs(iph6_inner.payload_len)); + iph_inner.ttl = iph6_inner.hop_limit - 1; + iph_inner.protocol = iph6_inner.nexthdr; + iph_inner.saddr = __bpf_constant_htonl(saddr); + iph_inner.daddr = __bpf_constant_htonl(daddr); + + tcp_off = sizeof(iph6_inner); + } else { + if (bpf_skb_load_bytes(skb, ETH_HLEN, &iph_inner, + sizeof(iph_inner)) < 0) + return TC_ACT_OK; + + tcp_off = sizeof(iph_inner); + } + + /* filter only packets we want */ + if (iph_inner.ihl != 5 || iph_inner.protocol != IPPROTO_TCP) + return TC_ACT_OK; + + if (bpf_skb_load_bytes(skb, ETH_HLEN + tcp_off, + &tcph, sizeof(tcph)) < 0) + return TC_ACT_OK; + + if (tcph.dest != __bpf_constant_htons(cfg_port)) + return TC_ACT_OK; + + olen = sizeof(h_outer.ip); + l2_len = 0; + + flags = BPF_F_ADJ_ROOM_FIXED_GSO | BPF_F_ADJ_ROOM_ENCAP_L3_IPV4; + + switch (l2_proto) { + case ETH_P_MPLS_UC: + l2_len = sizeof(mpls_label); + udp_dst = MPLS_OVER_UDP_PORT; + break; + case ETH_P_TEB: + l2_len = ETH_HLEN; + udp_dst = ETH_OVER_UDP_PORT; + break; + } + flags |= BPF_F_ADJ_ROOM_ENCAP_L2(l2_len); + + switch (encap_proto) { + case IPPROTO_GRE: + flags |= BPF_F_ADJ_ROOM_ENCAP_L4_GRE; + olen += sizeof(h_outer.l4hdr.gre); + h_outer.l4hdr.gre.protocol = bpf_htons(l2_proto); + h_outer.l4hdr.gre.flags = 0; + break; + case IPPROTO_UDP: + flags |= BPF_F_ADJ_ROOM_ENCAP_L4_UDP; + olen += sizeof(h_outer.l4hdr.udp); + h_outer.l4hdr.udp.source = __bpf_constant_htons(cfg_udp_src); + h_outer.l4hdr.udp.dest = bpf_htons(udp_dst); + h_outer.l4hdr.udp.check = 0; + h_outer.l4hdr.udp.len = bpf_htons(bpf_ntohs(iph_inner.tot_len) + + sizeof(h_outer.l4hdr.udp) + + l2_len); + break; + case IPPROTO_IPIP: + case IPPROTO_IPV6: + break; + default: + return TC_ACT_OK; + } + + /* add L2 encap (if specified) */ + switch (l2_proto) { + case ETH_P_MPLS_UC: + *((__u32 *)((__u8 *)&h_outer + olen)) = mpls_label; + break; + case ETH_P_TEB: + if (bpf_skb_load_bytes(skb, 0, (__u8 *)&h_outer + olen, + ETH_HLEN)) + return TC_ACT_SHOT; + break; + } + olen += l2_len; + + /* add room between mac and network header */ + if (bpf_skb_adjust_room(skb, olen, BPF_ADJ_ROOM_MAC, flags)) + return TC_ACT_SHOT; + + /* prepare new outer network header */ + h_outer.ip = iph_inner; + h_outer.ip.tot_len = bpf_htons(olen + + bpf_ntohs(h_outer.ip.tot_len)); + h_outer.ip.protocol = encap_proto; + + set_ipv4_csum((void *)&h_outer.ip); + + /* store new outer network header */ + if (bpf_skb_store_bytes(skb, ETH_HLEN, &h_outer, olen, + BPF_F_INVALIDATE_HASH) < 0) + return TC_ACT_SHOT; + + /* if changing outer proto type, update eth->h_proto */ + if (encap_proto == IPPROTO_IPV6) { + struct ethhdr eth; + + if (bpf_skb_load_bytes(skb, 0, ð, sizeof(eth)) < 0) + return TC_ACT_SHOT; + eth.h_proto = bpf_htons(ETH_P_IP); + if (bpf_skb_store_bytes(skb, 0, ð, sizeof(eth), 0) < 0) + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +static __always_inline int encap_ipv6(struct __sk_buff *skb, __u8 encap_proto, + __u16 l2_proto) +{ + __u16 udp_dst = UDP_PORT; + struct ipv6hdr iph_inner; + struct v6hdr h_outer; + struct tcphdr tcph; + int olen, l2_len; + __u16 tot_len; + __u64 flags; + + if (bpf_skb_load_bytes(skb, ETH_HLEN, &iph_inner, + sizeof(iph_inner)) < 0) + return TC_ACT_OK; + + /* filter only packets we want */ + if (bpf_skb_load_bytes(skb, ETH_HLEN + sizeof(iph_inner), + &tcph, sizeof(tcph)) < 0) + return TC_ACT_OK; + + if (tcph.dest != __bpf_constant_htons(cfg_port)) + return TC_ACT_OK; + + olen = sizeof(h_outer.ip); + l2_len = 0; + + flags = BPF_F_ADJ_ROOM_FIXED_GSO | BPF_F_ADJ_ROOM_ENCAP_L3_IPV6; + + switch (l2_proto) { + case ETH_P_MPLS_UC: + l2_len = sizeof(mpls_label); + udp_dst = MPLS_OVER_UDP_PORT; + break; + case ETH_P_TEB: + l2_len = ETH_HLEN; + udp_dst = ETH_OVER_UDP_PORT; + break; + } + flags |= BPF_F_ADJ_ROOM_ENCAP_L2(l2_len); + + switch (encap_proto) { + case IPPROTO_GRE: + flags |= BPF_F_ADJ_ROOM_ENCAP_L4_GRE; + olen += sizeof(h_outer.l4hdr.gre); + h_outer.l4hdr.gre.protocol = bpf_htons(l2_proto); + h_outer.l4hdr.gre.flags = 0; + break; + case IPPROTO_UDP: + flags |= BPF_F_ADJ_ROOM_ENCAP_L4_UDP; + olen += sizeof(h_outer.l4hdr.udp); + h_outer.l4hdr.udp.source = __bpf_constant_htons(cfg_udp_src); + h_outer.l4hdr.udp.dest = bpf_htons(udp_dst); + tot_len = bpf_ntohs(iph_inner.payload_len) + sizeof(iph_inner) + + sizeof(h_outer.l4hdr.udp); + h_outer.l4hdr.udp.check = 0; + h_outer.l4hdr.udp.len = bpf_htons(tot_len); + break; + case IPPROTO_IPV6: + break; + default: + return TC_ACT_OK; + } + + /* add L2 encap (if specified) */ + switch (l2_proto) { + case ETH_P_MPLS_UC: + *((__u32 *)((__u8 *)&h_outer + olen)) = mpls_label; + break; + case ETH_P_TEB: + if (bpf_skb_load_bytes(skb, 0, (__u8 *)&h_outer + olen, + ETH_HLEN)) + return TC_ACT_SHOT; + break; + } + olen += l2_len; + + /* add room between mac and network header */ + if (bpf_skb_adjust_room(skb, olen, BPF_ADJ_ROOM_MAC, flags)) + return TC_ACT_SHOT; + + /* prepare new outer network header */ + h_outer.ip = iph_inner; + h_outer.ip.payload_len = bpf_htons(olen + + bpf_ntohs(h_outer.ip.payload_len)); + + h_outer.ip.nexthdr = encap_proto; + + /* store new outer network header */ + if (bpf_skb_store_bytes(skb, ETH_HLEN, &h_outer, olen, + BPF_F_INVALIDATE_HASH) < 0) + return TC_ACT_SHOT; + + return TC_ACT_OK; +} + +SEC("encap_ipip_none") +int __encap_ipip_none(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IP)) + return encap_ipv4(skb, IPPROTO_IPIP, ETH_P_IP); + else + return TC_ACT_OK; +} + +SEC("encap_gre_none") +int __encap_gre_none(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IP)) + return encap_ipv4(skb, IPPROTO_GRE, ETH_P_IP); + else + return TC_ACT_OK; +} + +SEC("encap_gre_mpls") +int __encap_gre_mpls(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IP)) + return encap_ipv4(skb, IPPROTO_GRE, ETH_P_MPLS_UC); + else + return TC_ACT_OK; +} + +SEC("encap_gre_eth") +int __encap_gre_eth(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IP)) + return encap_ipv4(skb, IPPROTO_GRE, ETH_P_TEB); + else + return TC_ACT_OK; +} + +SEC("encap_udp_none") +int __encap_udp_none(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IP)) + return encap_ipv4(skb, IPPROTO_UDP, ETH_P_IP); + else + return TC_ACT_OK; +} + +SEC("encap_udp_mpls") +int __encap_udp_mpls(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IP)) + return encap_ipv4(skb, IPPROTO_UDP, ETH_P_MPLS_UC); + else + return TC_ACT_OK; +} + +SEC("encap_udp_eth") +int __encap_udp_eth(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IP)) + return encap_ipv4(skb, IPPROTO_UDP, ETH_P_TEB); + else + return TC_ACT_OK; +} + +SEC("encap_sit_none") +int __encap_sit_none(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv4(skb, IPPROTO_IPV6, ETH_P_IP); + else + return TC_ACT_OK; +} + +SEC("encap_ip6tnl_none") +int __encap_ip6tnl_none(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv6(skb, IPPROTO_IPV6, ETH_P_IPV6); + else + return TC_ACT_OK; +} + +SEC("encap_ip6gre_none") +int __encap_ip6gre_none(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv6(skb, IPPROTO_GRE, ETH_P_IPV6); + else + return TC_ACT_OK; +} + +SEC("encap_ip6gre_mpls") +int __encap_ip6gre_mpls(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv6(skb, IPPROTO_GRE, ETH_P_MPLS_UC); + else + return TC_ACT_OK; +} + +SEC("encap_ip6gre_eth") +int __encap_ip6gre_eth(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv6(skb, IPPROTO_GRE, ETH_P_TEB); + else + return TC_ACT_OK; +} + +SEC("encap_ip6udp_none") +int __encap_ip6udp_none(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv6(skb, IPPROTO_UDP, ETH_P_IPV6); + else + return TC_ACT_OK; +} + +SEC("encap_ip6udp_mpls") +int __encap_ip6udp_mpls(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv6(skb, IPPROTO_UDP, ETH_P_MPLS_UC); + else + return TC_ACT_OK; +} + +SEC("encap_ip6udp_eth") +int __encap_ip6udp_eth(struct __sk_buff *skb) +{ + if (skb->protocol == __bpf_constant_htons(ETH_P_IPV6)) + return encap_ipv6(skb, IPPROTO_UDP, ETH_P_TEB); + else + return TC_ACT_OK; +} + +static int decap_internal(struct __sk_buff *skb, int off, int len, char proto) +{ + char buf[sizeof(struct v6hdr)]; + struct gre_hdr greh; + struct udphdr udph; + int olen = len; + + switch (proto) { + case IPPROTO_IPIP: + case IPPROTO_IPV6: + break; + case IPPROTO_GRE: + olen += sizeof(struct gre_hdr); + if (bpf_skb_load_bytes(skb, off + len, &greh, sizeof(greh)) < 0) + return TC_ACT_OK; + switch (bpf_ntohs(greh.protocol)) { + case ETH_P_MPLS_UC: + olen += sizeof(mpls_label); + break; + case ETH_P_TEB: + olen += ETH_HLEN; + break; + } + break; + case IPPROTO_UDP: + olen += sizeof(struct udphdr); + if (bpf_skb_load_bytes(skb, off + len, &udph, sizeof(udph)) < 0) + return TC_ACT_OK; + switch (bpf_ntohs(udph.dest)) { + case MPLS_OVER_UDP_PORT: + olen += sizeof(mpls_label); + break; + case ETH_OVER_UDP_PORT: + olen += ETH_HLEN; + break; + } + break; + default: + return TC_ACT_OK; + } + + if (bpf_skb_adjust_room(skb, -olen, BPF_ADJ_ROOM_MAC, + BPF_F_ADJ_ROOM_FIXED_GSO)) + return TC_ACT_SHOT; + + return TC_ACT_OK; +} + +static int decap_ipv4(struct __sk_buff *skb) +{ + struct iphdr iph_outer; + + if (bpf_skb_load_bytes(skb, ETH_HLEN, &iph_outer, + sizeof(iph_outer)) < 0) + return TC_ACT_OK; + + if (iph_outer.ihl != 5) + return TC_ACT_OK; + + return decap_internal(skb, ETH_HLEN, sizeof(iph_outer), + iph_outer.protocol); +} + +static int decap_ipv6(struct __sk_buff *skb) +{ + struct ipv6hdr iph_outer; + + if (bpf_skb_load_bytes(skb, ETH_HLEN, &iph_outer, + sizeof(iph_outer)) < 0) + return TC_ACT_OK; + + return decap_internal(skb, ETH_HLEN, sizeof(iph_outer), + iph_outer.nexthdr); +} + +SEC("decap") +int decap_f(struct __sk_buff *skb) +{ + switch (skb->protocol) { + case __bpf_constant_htons(ETH_P_IP): + return decap_ipv4(skb); + case __bpf_constant_htons(ETH_P_IPV6): + return decap_ipv6(skb); + default: + /* does not match, ignore */ + return TC_ACT_OK; + } +} + +char __license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/test_tcp_check_syncookie_kern.c b/tools/testing/selftests/bpf/progs/test_tcp_check_syncookie_kern.c new file mode 100644 index 000000000000..1ab095bcacd8 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_tcp_check_syncookie_kern.c @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Facebook +// Copyright (c) 2019 Cloudflare + +#include <string.h> + +#include <linux/bpf.h> +#include <linux/pkt_cls.h> +#include <linux/if_ether.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <sys/socket.h> +#include <linux/tcp.h> + +#include "bpf_helpers.h" +#include "bpf_endian.h" + +struct bpf_map_def SEC("maps") results = { + .type = BPF_MAP_TYPE_ARRAY, + .key_size = sizeof(__u32), + .value_size = sizeof(__u64), + .max_entries = 1, +}; + +static __always_inline void check_syncookie(void *ctx, void *data, + void *data_end) +{ + struct bpf_sock_tuple tup; + struct bpf_sock *sk; + struct ethhdr *ethh; + struct iphdr *ipv4h; + struct ipv6hdr *ipv6h; + struct tcphdr *tcph; + int ret; + __u32 key = 0; + __u64 value = 1; + + ethh = data; + if (ethh + 1 > data_end) + return; + + switch (bpf_ntohs(ethh->h_proto)) { + case ETH_P_IP: + ipv4h = data + sizeof(struct ethhdr); + if (ipv4h + 1 > data_end) + return; + + if (ipv4h->ihl != 5) + return; + + tcph = data + sizeof(struct ethhdr) + sizeof(struct iphdr); + if (tcph + 1 > data_end) + return; + + tup.ipv4.saddr = ipv4h->saddr; + tup.ipv4.daddr = ipv4h->daddr; + tup.ipv4.sport = tcph->source; + tup.ipv4.dport = tcph->dest; + + sk = bpf_skc_lookup_tcp(ctx, &tup, sizeof(tup.ipv4), + BPF_F_CURRENT_NETNS, 0); + if (!sk) + return; + + if (sk->state != BPF_TCP_LISTEN) + goto release; + + ret = bpf_tcp_check_syncookie(sk, ipv4h, sizeof(*ipv4h), + tcph, sizeof(*tcph)); + break; + + case ETH_P_IPV6: + ipv6h = data + sizeof(struct ethhdr); + if (ipv6h + 1 > data_end) + return; + + if (ipv6h->nexthdr != IPPROTO_TCP) + return; + + tcph = data + sizeof(struct ethhdr) + sizeof(struct ipv6hdr); + if (tcph + 1 > data_end) + return; + + memcpy(tup.ipv6.saddr, &ipv6h->saddr, sizeof(tup.ipv6.saddr)); + memcpy(tup.ipv6.daddr, &ipv6h->daddr, sizeof(tup.ipv6.daddr)); + tup.ipv6.sport = tcph->source; + tup.ipv6.dport = tcph->dest; + + sk = bpf_skc_lookup_tcp(ctx, &tup, sizeof(tup.ipv6), + BPF_F_CURRENT_NETNS, 0); + if (!sk) + return; + + if (sk->state != BPF_TCP_LISTEN) + goto release; + + ret = bpf_tcp_check_syncookie(sk, ipv6h, sizeof(*ipv6h), + tcph, sizeof(*tcph)); + break; + + default: + return; + } + + if (ret == 0) + bpf_map_update_elem(&results, &key, &value, 0); + +release: + bpf_sk_release(sk); +} + +SEC("clsact/check_syncookie") +int check_syncookie_clsact(struct __sk_buff *skb) +{ + check_syncookie(skb, (void *)(long)skb->data, + (void *)(long)skb->data_end); + return TC_ACT_OK; +} + +SEC("xdp/check_syncookie") +int check_syncookie_xdp(struct xdp_md *ctx) +{ + check_syncookie(ctx, (void *)(long)ctx->data, + (void *)(long)ctx->data_end); + return XDP_PASS; +} + +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c index 74f73b33a7b0..c7c3240e0dd4 100644 --- a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c +++ b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <stddef.h> #include <string.h> +#include <netinet/in.h> #include <linux/bpf.h> #include <linux/if_ether.h> #include <linux/if_packet.h> @@ -9,7 +10,6 @@ #include <linux/types.h> #include <linux/socket.h> #include <linux/tcp.h> -#include <netinet/in.h> #include "bpf_helpers.h" #include "bpf_endian.h" #include "test_tcpbpf.h" diff --git a/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c b/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c index edbca203ce2d..ec6db6e64c41 100644 --- a/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c +++ b/tools/testing/selftests/bpf/progs/test_tcpnotify_kern.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <stddef.h> #include <string.h> +#include <netinet/in.h> #include <linux/bpf.h> #include <linux/if_ether.h> #include <linux/if_packet.h> @@ -9,7 +10,6 @@ #include <linux/types.h> #include <linux/socket.h> #include <linux/tcp.h> -#include <netinet/in.h> #include "bpf_helpers.h" #include "bpf_endian.h" #include "test_tcpnotify.h" diff --git a/tools/testing/selftests/bpf/progs/test_verif_scale1.c b/tools/testing/selftests/bpf/progs/test_verif_scale1.c new file mode 100644 index 000000000000..f3236ce35f31 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_verif_scale1.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Facebook +#include <linux/bpf.h> +#include "bpf_helpers.h" +#define ATTR __attribute__((noinline)) +#include "test_jhash.h" + +SEC("scale90_noinline") +int balancer_ingress(struct __sk_buff *ctx) +{ + void *data_end = (void *)(long)ctx->data_end; + void *data = (void *)(long)ctx->data; + void *ptr; + int ret = 0, nh_off, i = 0; + + nh_off = 14; + + /* pragma unroll doesn't work on large loops */ + +#define C do { \ + ptr = data + i; \ + if (ptr + nh_off > data_end) \ + break; \ + ctx->tc_index = jhash(ptr, nh_off, ctx->cb[0] + i++); \ + } while (0); +#define C30 C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C; + C30;C30;C30; /* 90 calls */ + return 0; +} +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/test_verif_scale2.c b/tools/testing/selftests/bpf/progs/test_verif_scale2.c new file mode 100644 index 000000000000..77830693eccb --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_verif_scale2.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Facebook +#include <linux/bpf.h> +#include "bpf_helpers.h" +#define ATTR __attribute__((always_inline)) +#include "test_jhash.h" + +SEC("scale90_inline") +int balancer_ingress(struct __sk_buff *ctx) +{ + void *data_end = (void *)(long)ctx->data_end; + void *data = (void *)(long)ctx->data; + void *ptr; + int ret = 0, nh_off, i = 0; + + nh_off = 14; + + /* pragma unroll doesn't work on large loops */ + +#define C do { \ + ptr = data + i; \ + if (ptr + nh_off > data_end) \ + break; \ + ctx->tc_index = jhash(ptr, nh_off, ctx->cb[0] + i++); \ + } while (0); +#define C30 C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C; + C30;C30;C30; /* 90 calls */ + return 0; +} +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/test_verif_scale3.c b/tools/testing/selftests/bpf/progs/test_verif_scale3.c new file mode 100644 index 000000000000..1848da04ea41 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_verif_scale3.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Facebook +#include <linux/bpf.h> +#include "bpf_helpers.h" +#define ATTR __attribute__((noinline)) +#include "test_jhash.h" + +SEC("scale90_noinline32") +int balancer_ingress(struct __sk_buff *ctx) +{ + void *data_end = (void *)(long)ctx->data_end; + void *data = (void *)(long)ctx->data; + void *ptr; + int ret = 0, nh_off, i = 0; + + nh_off = 32; + + /* pragma unroll doesn't work on large loops */ + +#define C do { \ + ptr = data + i; \ + if (ptr + nh_off > data_end) \ + break; \ + ctx->tc_index = jhash(ptr, nh_off, ctx->cb[0] + i++); \ + } while (0); +#define C30 C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C;C; + C30;C30;C30; /* 90 calls */ + return 0; +} +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c index 23e3b314ca60..42c1ce988945 100644 --- a/tools/testing/selftests/bpf/test_btf.c +++ b/tools/testing/selftests/bpf/test_btf.c @@ -24,6 +24,7 @@ #include "bpf_rlimit.h" #include "bpf_util.h" +#include "test_btf.h" #define MAX_INSNS 512 #define MAX_SUBPROGS 16 @@ -58,63 +59,6 @@ static int __base_pr(enum libbpf_print_level level __attribute__((unused)), return vfprintf(stderr, format, args); } -#define BTF_INFO_ENC(kind, kind_flag, vlen) \ - ((!!(kind_flag) << 31) | ((kind) << 24) | ((vlen) & BTF_MAX_VLEN)) - -#define BTF_TYPE_ENC(name, info, size_or_type) \ - (name), (info), (size_or_type) - -#define BTF_INT_ENC(encoding, bits_offset, nr_bits) \ - ((encoding) << 24 | (bits_offset) << 16 | (nr_bits)) -#define BTF_TYPE_INT_ENC(name, encoding, bits_offset, bits, sz) \ - BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_INT, 0, 0), sz), \ - BTF_INT_ENC(encoding, bits_offset, bits) - -#define BTF_FWD_ENC(name, kind_flag) \ - BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_FWD, kind_flag, 0), 0) - -#define BTF_ARRAY_ENC(type, index_type, nr_elems) \ - (type), (index_type), (nr_elems) -#define BTF_TYPE_ARRAY_ENC(type, index_type, nr_elems) \ - BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_ARRAY, 0, 0), 0), \ - BTF_ARRAY_ENC(type, index_type, nr_elems) - -#define BTF_STRUCT_ENC(name, nr_elems, sz) \ - BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, nr_elems), sz) - -#define BTF_UNION_ENC(name, nr_elems, sz) \ - BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_UNION, 0, nr_elems), sz) - -#define BTF_MEMBER_ENC(name, type, bits_offset) \ - (name), (type), (bits_offset) -#define BTF_ENUM_ENC(name, val) (name), (val) -#define BTF_MEMBER_OFFSET(bitfield_size, bits_offset) \ - ((bitfield_size) << 24 | (bits_offset)) - -#define BTF_TYPEDEF_ENC(name, type) \ - BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_TYPEDEF, 0, 0), type) - -#define BTF_PTR_ENC(type) \ - BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), type) - -#define BTF_CONST_ENC(type) \ - BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), type) - -#define BTF_VOLATILE_ENC(type) \ - BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_VOLATILE, 0, 0), type) - -#define BTF_RESTRICT_ENC(type) \ - BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_RESTRICT, 0, 0), type) - -#define BTF_FUNC_PROTO_ENC(ret_type, nargs) \ - BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_FUNC_PROTO, 0, nargs), ret_type) - -#define BTF_FUNC_PROTO_ARG_ENC(name, type) \ - (name), (type) - -#define BTF_FUNC_ENC(name, func_proto) \ - BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_FUNC, 0, 0), func_proto) - #define BTF_END_RAW 0xdeadbeef #define NAME_TBD 0xdeadb33f @@ -291,7 +235,6 @@ static struct btf_raw_test raw_tests[] = { .value_type_id = 3, .max_entries = 4, }, - { .descr = "struct test #3 Invalid member offset", .raw_types = { @@ -319,7 +262,664 @@ static struct btf_raw_test raw_tests[] = { .btf_load_err = true, .err_str = "Invalid member bits_offset", }, - +/* + * struct A { + * unsigned long long m; + * int n; + * char o; + * [3 bytes hole] + * int p[8]; + * }; + */ +{ + .descr = "global data test #1", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = "struct_test1_map", + .key_size = sizeof(int), + .value_size = 48, + .key_type_id = 1, + .value_type_id = 5, + .max_entries = 4, +}, +/* + * struct A { + * unsigned long long m; + * int n; + * char o; + * [3 bytes hole] + * int p[8]; + * }; + * static struct A t; <- in .bss + */ +{ + .descr = "global data test #2", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* .bss section */ /* [7] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 48), + BTF_VAR_SECINFO_ENC(6, 0, 48), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 48, + .key_type_id = 0, + .value_type_id = 7, + .max_entries = 1, +}, +{ + .descr = "global data test #3", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* static int t */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(2, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0t\0.bss", + .str_sec_size = sizeof("\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 3, + .max_entries = 1, +}, +{ + .descr = "global data test #4, unsupported linkage", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* static int t */ + BTF_VAR_ENC(NAME_TBD, 1, 2), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(2, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0t\0.bss", + .str_sec_size = sizeof("\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 3, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Linkage not supported", +}, +{ + .descr = "global data test #5, invalid var type", + .raw_types = { + /* static void t */ + BTF_VAR_ENC(NAME_TBD, 0, 0), /* [1] */ + /* .bss section */ /* [2] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(1, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0t\0.bss", + .str_sec_size = sizeof("\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 2, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type_id", +}, +{ + .descr = "global data test #6, invalid var type (fwd type)", + .raw_types = { + /* union A */ + BTF_TYPE_ENC(NAME_TBD, + BTF_INFO_ENC(BTF_KIND_FWD, 1, 0), 0), /* [1] */ + /* static union A t */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(2, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0.bss", + .str_sec_size = sizeof("\0A\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 2, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type", +}, +{ + .descr = "global data test #7, invalid var type (fwd type)", + .raw_types = { + /* union A */ + BTF_TYPE_ENC(NAME_TBD, + BTF_INFO_ENC(BTF_KIND_FWD, 1, 0), 0), /* [1] */ + /* static union A t */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(1, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0.bss", + .str_sec_size = sizeof("\0A\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 2, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type", +}, +{ + .descr = "global data test #8, invalid var size", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* .bss section */ /* [7] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 48), + BTF_VAR_SECINFO_ENC(6, 0, 47), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 48, + .key_type_id = 0, + .value_type_id = 7, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid size", +}, +{ + .descr = "global data test #9, invalid var size", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* .bss section */ /* [7] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 46), + BTF_VAR_SECINFO_ENC(6, 0, 48), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 48, + .key_type_id = 0, + .value_type_id = 7, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid size", +}, +{ + .descr = "global data test #10, invalid var size", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* .bss section */ /* [7] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 46), + BTF_VAR_SECINFO_ENC(6, 0, 46), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 48, + .key_type_id = 0, + .value_type_id = 7, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid size", +}, +{ + .descr = "global data test #11, multiple section members", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* static int u */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [7] */ + /* .bss section */ /* [8] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 2), 62), + BTF_VAR_SECINFO_ENC(6, 10, 48), + BTF_VAR_SECINFO_ENC(7, 58, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0u\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0u\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 62, + .key_type_id = 0, + .value_type_id = 8, + .max_entries = 1, +}, +{ + .descr = "global data test #12, invalid offset", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* static int u */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [7] */ + /* .bss section */ /* [8] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 2), 62), + BTF_VAR_SECINFO_ENC(6, 10, 48), + BTF_VAR_SECINFO_ENC(7, 60, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0u\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0u\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 62, + .key_type_id = 0, + .value_type_id = 8, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid offset+size", +}, +{ + .descr = "global data test #13, invalid offset", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* static int u */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [7] */ + /* .bss section */ /* [8] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 2), 62), + BTF_VAR_SECINFO_ENC(6, 10, 48), + BTF_VAR_SECINFO_ENC(7, 12, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0u\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0u\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 62, + .key_type_id = 0, + .value_type_id = 8, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid offset", +}, +{ + .descr = "global data test #14, invalid offset", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* unsigned long long */ + BTF_TYPE_INT_ENC(0, 0, 0, 64, 8), /* [2] */ + /* char */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), /* [3] */ + /* int[8] */ + BTF_TYPE_ARRAY_ENC(1, 1, 8), /* [4] */ + /* struct A { */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 4), 48), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* unsigned long long m;*/ + BTF_MEMBER_ENC(NAME_TBD, 1, 64),/* int n; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 96),/* char o; */ + BTF_MEMBER_ENC(NAME_TBD, 4, 128),/* int p[8] */ + /* } */ + /* static struct A t */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */ + /* static int u */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [7] */ + /* .bss section */ /* [8] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 2), 62), + BTF_VAR_SECINFO_ENC(7, 58, 4), + BTF_VAR_SECINFO_ENC(6, 10, 48), + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0o\0p\0t\0u\0.bss", + .str_sec_size = sizeof("\0A\0m\0n\0o\0p\0t\0u\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 62, + .key_type_id = 0, + .value_type_id = 8, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid offset", +}, +{ + .descr = "global data test #15, not var kind", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(1, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0.bss", + .str_sec_size = sizeof("\0A\0t\0.bss"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 3, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Not a VAR kind member", +}, +{ + .descr = "global data test #16, invalid var referencing sec", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + BTF_VAR_ENC(NAME_TBD, 5, 0), /* [2] */ + BTF_VAR_ENC(NAME_TBD, 2, 0), /* [3] */ + /* a section */ /* [4] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(3, 0, 4), + /* a section */ /* [5] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(6, 0, 4), + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [6] */ + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0s\0a\0a", + .str_sec_size = sizeof("\0A\0t\0s\0a\0a"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 4, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type_id", +}, +{ + .descr = "global data test #17, invalid var referencing var", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [2] */ + BTF_VAR_ENC(NAME_TBD, 2, 0), /* [3] */ + /* a section */ /* [4] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(3, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0s\0a\0a", + .str_sec_size = sizeof("\0A\0t\0s\0a\0a"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 4, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type_id", +}, +{ + .descr = "global data test #18, invalid var loop", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + BTF_VAR_ENC(NAME_TBD, 2, 0), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(2, 0, 4), + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0aaa", + .str_sec_size = sizeof("\0A\0t\0aaa"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 4, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type_id", +}, +{ + .descr = "global data test #19, invalid var referencing var", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + BTF_VAR_ENC(NAME_TBD, 3, 0), /* [2] */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [3] */ + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0s\0a\0a", + .str_sec_size = sizeof("\0A\0t\0s\0a\0a"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 4, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type_id", +}, +{ + .descr = "global data test #20, invalid ptr referencing var", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* PTR type_id=3 */ /* [2] */ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 3), + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [3] */ + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0s\0a\0a", + .str_sec_size = sizeof("\0A\0t\0s\0a\0a"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 4, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid type_id", +}, +{ + .descr = "global data test #21, var included in struct", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* struct A { */ /* [2] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 2), sizeof(int) * 2), + BTF_MEMBER_ENC(NAME_TBD, 1, 0), /* int m; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 32),/* VAR type_id=3; */ + /* } */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [3] */ + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0s\0a\0a", + .str_sec_size = sizeof("\0A\0t\0s\0a\0a"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 4, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid member", +}, +{ + .descr = "global data test #22, array of var", + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + BTF_TYPE_ARRAY_ENC(3, 1, 4), /* [2] */ + BTF_VAR_ENC(NAME_TBD, 1, 0), /* [3] */ + BTF_END_RAW, + }, + .str_sec = "\0A\0t\0s\0a\0a", + .str_sec_size = sizeof("\0A\0t\0s\0a\0a"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = ".bss", + .key_size = sizeof(int), + .value_size = 4, + .key_type_id = 0, + .value_type_id = 4, + .max_entries = 1, + .btf_load_err = true, + .err_str = "Invalid elem", +}, /* Test member exceeds the size of struct. * * struct A { @@ -3677,6 +4277,7 @@ struct pprint_mapv { } aenum; uint32_t ui32b; uint32_t bits2c:2; + uint8_t si8_4[2][2]; }; #ifdef __SIZEOF_INT128__ @@ -3729,7 +4330,7 @@ static struct btf_raw_test pprint_test_template[] = { BTF_ENUM_ENC(NAME_TBD, 2), BTF_ENUM_ENC(NAME_TBD, 3), /* struct pprint_mapv */ /* [16] */ - BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 10), 40), + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 11), 40), BTF_MEMBER_ENC(NAME_TBD, 11, 0), /* uint32_t ui32 */ BTF_MEMBER_ENC(NAME_TBD, 10, 32), /* uint16_t ui16 */ BTF_MEMBER_ENC(NAME_TBD, 12, 64), /* int32_t si32 */ @@ -3740,9 +4341,12 @@ static struct btf_raw_test pprint_test_template[] = { BTF_MEMBER_ENC(NAME_TBD, 15, 192), /* aenum */ BTF_MEMBER_ENC(NAME_TBD, 11, 224), /* uint32_t ui32b */ BTF_MEMBER_ENC(NAME_TBD, 6, 256), /* bits2c */ + BTF_MEMBER_ENC(NAME_TBD, 17, 264), /* si8_4 */ + BTF_TYPE_ARRAY_ENC(18, 1, 2), /* [17] */ + BTF_TYPE_ARRAY_ENC(1, 1, 2), /* [18] */ BTF_END_RAW, }, - BTF_STR_SEC("\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum\0ui32b\0bits2c"), + BTF_STR_SEC("\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum\0ui32b\0bits2c\0si8_4"), .key_size = sizeof(unsigned int), .value_size = sizeof(struct pprint_mapv), .key_type_id = 3, /* unsigned int */ @@ -3791,7 +4395,7 @@ static struct btf_raw_test pprint_test_template[] = { BTF_ENUM_ENC(NAME_TBD, 2), BTF_ENUM_ENC(NAME_TBD, 3), /* struct pprint_mapv */ /* [16] */ - BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 1, 10), 40), + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 1, 11), 40), BTF_MEMBER_ENC(NAME_TBD, 11, BTF_MEMBER_OFFSET(0, 0)), /* uint32_t ui32 */ BTF_MEMBER_ENC(NAME_TBD, 10, BTF_MEMBER_OFFSET(0, 32)), /* uint16_t ui16 */ BTF_MEMBER_ENC(NAME_TBD, 12, BTF_MEMBER_OFFSET(0, 64)), /* int32_t si32 */ @@ -3802,9 +4406,12 @@ static struct btf_raw_test pprint_test_template[] = { BTF_MEMBER_ENC(NAME_TBD, 15, BTF_MEMBER_OFFSET(0, 192)), /* aenum */ BTF_MEMBER_ENC(NAME_TBD, 11, BTF_MEMBER_OFFSET(0, 224)), /* uint32_t ui32b */ BTF_MEMBER_ENC(NAME_TBD, 6, BTF_MEMBER_OFFSET(2, 256)), /* bits2c */ + BTF_MEMBER_ENC(NAME_TBD, 17, 264), /* si8_4 */ + BTF_TYPE_ARRAY_ENC(18, 1, 2), /* [17] */ + BTF_TYPE_ARRAY_ENC(1, 1, 2), /* [18] */ BTF_END_RAW, }, - BTF_STR_SEC("\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum\0ui32b\0bits2c"), + BTF_STR_SEC("\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum\0ui32b\0bits2c\0si8_4"), .key_size = sizeof(unsigned int), .value_size = sizeof(struct pprint_mapv), .key_type_id = 3, /* unsigned int */ @@ -3855,7 +4462,7 @@ static struct btf_raw_test pprint_test_template[] = { BTF_ENUM_ENC(NAME_TBD, 2), BTF_ENUM_ENC(NAME_TBD, 3), /* struct pprint_mapv */ /* [16] */ - BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 1, 10), 40), + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 1, 11), 40), BTF_MEMBER_ENC(NAME_TBD, 11, BTF_MEMBER_OFFSET(0, 0)), /* uint32_t ui32 */ BTF_MEMBER_ENC(NAME_TBD, 10, BTF_MEMBER_OFFSET(0, 32)), /* uint16_t ui16 */ BTF_MEMBER_ENC(NAME_TBD, 12, BTF_MEMBER_OFFSET(0, 64)), /* int32_t si32 */ @@ -3866,13 +4473,16 @@ static struct btf_raw_test pprint_test_template[] = { BTF_MEMBER_ENC(NAME_TBD, 15, BTF_MEMBER_OFFSET(0, 192)), /* aenum */ BTF_MEMBER_ENC(NAME_TBD, 11, BTF_MEMBER_OFFSET(0, 224)), /* uint32_t ui32b */ BTF_MEMBER_ENC(NAME_TBD, 17, BTF_MEMBER_OFFSET(2, 256)), /* bits2c */ + BTF_MEMBER_ENC(NAME_TBD, 20, BTF_MEMBER_OFFSET(0, 264)), /* si8_4 */ /* typedef unsigned int ___int */ /* [17] */ BTF_TYPEDEF_ENC(NAME_TBD, 18), BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_VOLATILE, 0, 0), 6), /* [18] */ BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 15), /* [19] */ + BTF_TYPE_ARRAY_ENC(21, 1, 2), /* [20] */ + BTF_TYPE_ARRAY_ENC(1, 1, 2), /* [21] */ BTF_END_RAW, }, - BTF_STR_SEC("\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum\0ui32b\0bits2c\0___int"), + BTF_STR_SEC("\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum\0ui32b\0bits2c\0___int\0si8_4"), .key_size = sizeof(unsigned int), .value_size = sizeof(struct pprint_mapv), .key_type_id = 3, /* unsigned int */ @@ -4007,6 +4617,10 @@ static void set_pprint_mapv(enum pprint_mapv_kind_t mapv_kind, v->aenum = i & 0x03; v->ui32b = 4; v->bits2c = 1; + v->si8_4[0][0] = (cpu + i) & 0xff; + v->si8_4[0][1] = (cpu + i + 1) & 0xff; + v->si8_4[1][0] = (cpu + i + 2) & 0xff; + v->si8_4[1][1] = (cpu + i + 3) & 0xff; v = (void *)v + rounded_value_size; } } @@ -4040,7 +4654,7 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind, nexpected_line = snprintf(expected_line, line_size, "%s%u: {%u,0,%d,0x%x,0x%x,0x%x," "{%lu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s," - "%u,0x%x}\n", + "%u,0x%x,[[%d,%d],[%d,%d]]}\n", percpu_map ? "\tcpu" : "", percpu_map ? cpu : next_key, v->ui32, v->si32, @@ -4054,7 +4668,9 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind, v->ui8a[6], v->ui8a[7], pprint_enum_str[v->aenum], v->ui32b, - v->bits2c); + v->bits2c, + v->si8_4[0][0], v->si8_4[0][1], + v->si8_4[1][0], v->si8_4[1][1]); } #ifdef __SIZEOF_INT128__ @@ -5777,6 +6393,53 @@ const struct btf_dedup_test dedup_tests[] = { }, }, { + .descr = "dedup: void equiv check", + /* + * // CU 1: + * struct s { + * struct {} *x; + * }; + * // CU 2: + * struct s { + * int *x; + * }; + */ + .input = { + .raw_types = { + /* CU 1 */ + BTF_STRUCT_ENC(0, 0, 1), /* [1] struct {} */ + BTF_PTR_ENC(1), /* [2] ptr -> [1] */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [3] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 2, 0), + /* CU 2 */ + BTF_PTR_ENC(0), /* [4] ptr -> void */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [5] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 4, 0), + BTF_END_RAW, + }, + BTF_STR_SEC("\0s\0x"), + }, + .expect = { + .raw_types = { + /* CU 1 */ + BTF_STRUCT_ENC(0, 0, 1), /* [1] struct {} */ + BTF_PTR_ENC(1), /* [2] ptr -> [1] */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [3] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 2, 0), + /* CU 2 */ + BTF_PTR_ENC(0), /* [4] ptr -> void */ + BTF_STRUCT_ENC(NAME_NTH(1), 1, 8), /* [5] struct s */ + BTF_MEMBER_ENC(NAME_NTH(2), 4, 0), + BTF_END_RAW, + }, + BTF_STR_SEC("\0s\0x"), + }, + .opts = { + .dont_resolve_fwds = false, + .dedup_table_size = 1, /* force hash collisions */ + }, +}, +{ .descr = "dedup: all possible kinds (no duplicates)", .input = { .raw_types = { @@ -5918,6 +6581,51 @@ const struct btf_dedup_test dedup_tests[] = { .dont_resolve_fwds = false, }, }, +{ + .descr = "dedup: datasec and vars pass-through", + .input = { + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* static int t */ + BTF_VAR_ENC(NAME_NTH(2), 1, 0), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_NTH(1), BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(2, 0, 4), + /* int, referenced from [5] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [4] */ + /* another static int t */ + BTF_VAR_ENC(NAME_NTH(2), 4, 0), /* [5] */ + /* another .bss section */ /* [6] */ + BTF_TYPE_ENC(NAME_NTH(1), BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(5, 0, 4), + BTF_END_RAW, + }, + BTF_STR_SEC("\0.bss\0t"), + }, + .expect = { + .raw_types = { + /* int */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), /* [1] */ + /* static int t */ + BTF_VAR_ENC(NAME_NTH(2), 1, 0), /* [2] */ + /* .bss section */ /* [3] */ + BTF_TYPE_ENC(NAME_NTH(1), BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(2, 0, 4), + /* another static int t */ + BTF_VAR_ENC(NAME_NTH(2), 1, 0), /* [4] */ + /* another .bss section */ /* [5] */ + BTF_TYPE_ENC(NAME_NTH(1), BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 1), 4), + BTF_VAR_SECINFO_ENC(4, 0, 4), + BTF_END_RAW, + }, + BTF_STR_SEC("\0.bss\0t"), + }, + .opts = { + .dont_resolve_fwds = false, + .dedup_table_size = 1 + }, +}, }; @@ -5947,6 +6655,10 @@ static int btf_type_size(const struct btf_type *t) return base_size + vlen * sizeof(struct btf_member); case BTF_KIND_FUNC_PROTO: return base_size + vlen * sizeof(struct btf_param); + case BTF_KIND_VAR: + return base_size + sizeof(struct btf_var); + case BTF_KIND_DATASEC: + return base_size + vlen * sizeof(struct btf_var_secinfo); default: fprintf(stderr, "Unsupported BTF_KIND:%u\n", kind); return -EINVAL; diff --git a/tools/testing/selftests/bpf/test_btf.h b/tools/testing/selftests/bpf/test_btf.h new file mode 100644 index 000000000000..2023725f1962 --- /dev/null +++ b/tools/testing/selftests/bpf/test_btf.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019 Facebook */ + +#ifndef _TEST_BTF_H +#define _TEST_BTF_H + +#define BTF_INFO_ENC(kind, kind_flag, vlen) \ + ((!!(kind_flag) << 31) | ((kind) << 24) | ((vlen) & BTF_MAX_VLEN)) + +#define BTF_TYPE_ENC(name, info, size_or_type) \ + (name), (info), (size_or_type) + +#define BTF_INT_ENC(encoding, bits_offset, nr_bits) \ + ((encoding) << 24 | (bits_offset) << 16 | (nr_bits)) +#define BTF_TYPE_INT_ENC(name, encoding, bits_offset, bits, sz) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_INT, 0, 0), sz), \ + BTF_INT_ENC(encoding, bits_offset, bits) + +#define BTF_FWD_ENC(name, kind_flag) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_FWD, kind_flag, 0), 0) + +#define BTF_ARRAY_ENC(type, index_type, nr_elems) \ + (type), (index_type), (nr_elems) +#define BTF_TYPE_ARRAY_ENC(type, index_type, nr_elems) \ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_ARRAY, 0, 0), 0), \ + BTF_ARRAY_ENC(type, index_type, nr_elems) + +#define BTF_STRUCT_ENC(name, nr_elems, sz) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, nr_elems), sz) + +#define BTF_UNION_ENC(name, nr_elems, sz) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_UNION, 0, nr_elems), sz) + +#define BTF_VAR_ENC(name, type, linkage) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_VAR, 0, 0), type), (linkage) +#define BTF_VAR_SECINFO_ENC(type, offset, size) \ + (type), (offset), (size) + +#define BTF_MEMBER_ENC(name, type, bits_offset) \ + (name), (type), (bits_offset) +#define BTF_ENUM_ENC(name, val) (name), (val) +#define BTF_MEMBER_OFFSET(bitfield_size, bits_offset) \ + ((bitfield_size) << 24 | (bits_offset)) + +#define BTF_TYPEDEF_ENC(name, type) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_TYPEDEF, 0, 0), type) + +#define BTF_PTR_ENC(type) \ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), type) + +#define BTF_CONST_ENC(type) \ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), type) + +#define BTF_VOLATILE_ENC(type) \ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_VOLATILE, 0, 0), type) + +#define BTF_RESTRICT_ENC(type) \ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_RESTRICT, 0, 0), type) + +#define BTF_FUNC_PROTO_ENC(ret_type, nargs) \ + BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_FUNC_PROTO, 0, nargs), ret_type) + +#define BTF_FUNC_PROTO_ARG_ENC(name, type) \ + (name), (type) + +#define BTF_FUNC_ENC(name, func_proto) \ + BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_FUNC, 0, 0), func_proto) + +#endif /* _TEST_BTF_H */ diff --git a/tools/testing/selftests/bpf/test_libbpf_open.c b/tools/testing/selftests/bpf/test_libbpf_open.c index 65cbd30704b5..9e9db202d218 100644 --- a/tools/testing/selftests/bpf/test_libbpf_open.c +++ b/tools/testing/selftests/bpf/test_libbpf_open.c @@ -11,6 +11,8 @@ static const char *__doc__ = #include <bpf/libbpf.h> #include <getopt.h> +#include "bpf_rlimit.h" + static const struct option long_options[] = { {"help", no_argument, NULL, 'h' }, {"debug", no_argument, NULL, 'D' }, diff --git a/tools/testing/selftests/bpf/test_lru_map.c b/tools/testing/selftests/bpf/test_lru_map.c index 781c7de343be..1b25a7e348dc 100644 --- a/tools/testing/selftests/bpf/test_lru_map.c +++ b/tools/testing/selftests/bpf/test_lru_map.c @@ -18,9 +18,11 @@ #include <sys/wait.h> #include <bpf/bpf.h> +#include <bpf/libbpf.h> #include "bpf_util.h" #include "bpf_rlimit.h" +#include "../../../include/linux/filter.h" #define LOCAL_FREE_TARGET (128) #define PERCPU_FREE_TARGET (4) @@ -40,6 +42,68 @@ static int create_map(int map_type, int map_flags, unsigned int size) return map_fd; } +static int bpf_map_lookup_elem_with_ref_bit(int fd, unsigned long long key, + void *value) +{ + struct bpf_load_program_attr prog; + struct bpf_create_map_attr map; + struct bpf_insn insns[] = { + BPF_LD_MAP_VALUE(BPF_REG_9, 0, 0), + BPF_LD_MAP_FD(BPF_REG_1, fd), + BPF_LD_IMM64(BPF_REG_3, key), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_2, BPF_REG_3, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 4), + BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_9, BPF_REG_1, 0), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_JMP_IMM(BPF_JA, 0, 0, 1), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }; + __u8 data[64] = {}; + int mfd, pfd, ret, zero = 0; + __u32 retval = 0; + + memset(&map, 0, sizeof(map)); + map.map_type = BPF_MAP_TYPE_ARRAY; + map.key_size = sizeof(int); + map.value_size = sizeof(unsigned long long); + map.max_entries = 1; + + mfd = bpf_create_map_xattr(&map); + if (mfd < 0) + return -1; + + insns[0].imm = mfd; + + memset(&prog, 0, sizeof(prog)); + prog.prog_type = BPF_PROG_TYPE_SCHED_CLS; + prog.insns = insns; + prog.insns_cnt = ARRAY_SIZE(insns); + prog.license = "GPL"; + + pfd = bpf_load_program_xattr(&prog, NULL, 0); + if (pfd < 0) { + close(mfd); + return -1; + } + + ret = bpf_prog_test_run(pfd, 1, data, sizeof(data), + NULL, NULL, &retval, NULL); + if (ret < 0 || retval != 42) { + ret = -1; + } else { + assert(!bpf_map_lookup_elem(mfd, &zero, value)); + ret = 0; + } + close(pfd); + close(mfd); + return ret; +} + static int map_subset(int map0, int map1) { unsigned long long next_key = 0; @@ -87,7 +151,7 @@ static int sched_next_online(int pid, int *next_to_try) return ret; } -/* Size of the LRU amp is 2 +/* Size of the LRU map is 2 * Add key=1 (+1 key) * Add key=2 (+1 key) * Lookup Key=1 @@ -157,7 +221,7 @@ static void test_lru_sanity0(int map_type, int map_flags) * stop LRU from removing key=1 */ key = 1; - assert(!bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); assert(value[0] == 1234); key = 3; @@ -167,7 +231,8 @@ static void test_lru_sanity0(int map_type, int map_flags) /* key=2 has been removed from the LRU */ key = 2; - assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); assert(map_equal(lru_map_fd, expected_map_fd)); @@ -221,7 +286,7 @@ static void test_lru_sanity1(int map_type, int map_flags, unsigned int tgt_free) /* Lookup 1 to tgt_free/2 */ end_key = 1 + batch_size; for (key = 1; key < end_key; key++) { - assert(!bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); assert(!bpf_map_update_elem(expected_map_fd, &key, value, BPF_NOEXIST)); } @@ -322,10 +387,11 @@ static void test_lru_sanity2(int map_type, int map_flags, unsigned int tgt_free) end_key = 1 + batch_size; value[0] = 4321; for (key = 1; key < end_key; key++) { - assert(bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); - assert(!bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); assert(value[0] == 4321); assert(!bpf_map_update_elem(expected_map_fd, &key, value, BPF_NOEXIST)); @@ -404,7 +470,7 @@ static void test_lru_sanity3(int map_type, int map_flags, unsigned int tgt_free) /* Lookup key 1 to tgt_free*3/2 */ end_key = tgt_free + batch_size; for (key = 1; key < end_key; key++) { - assert(!bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); assert(!bpf_map_update_elem(expected_map_fd, &key, value, BPF_NOEXIST)); } @@ -463,7 +529,7 @@ static void test_lru_sanity4(int map_type, int map_flags, unsigned int tgt_free) assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); for (key = 1; key <= tgt_free; key++) { - assert(!bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); assert(!bpf_map_update_elem(expected_map_fd, &key, value, BPF_NOEXIST)); } @@ -494,16 +560,16 @@ static void do_test_lru_sanity5(unsigned long long last_key, int map_fd) unsigned long long key, value[nr_cpus]; /* Ensure the last key inserted by previous CPU can be found */ - assert(!bpf_map_lookup_elem(map_fd, &last_key, value)); - + assert(!bpf_map_lookup_elem_with_ref_bit(map_fd, last_key, value)); value[0] = 1234; key = last_key + 1; assert(!bpf_map_update_elem(map_fd, &key, value, BPF_NOEXIST)); - assert(!bpf_map_lookup_elem(map_fd, &key, value)); + assert(!bpf_map_lookup_elem_with_ref_bit(map_fd, key, value)); /* Cannot find the last key because it was removed by LRU */ - assert(bpf_map_lookup_elem(map_fd, &last_key, value)); + assert(bpf_map_lookup_elem(map_fd, &last_key, value) == -1 && + errno == ENOENT); } /* Test map with only one element */ @@ -590,8 +656,8 @@ static void test_lru_sanity6(int map_type, int map_flags, int tgt_free) /* Make ref bit sticky for key: [1, tgt_free] */ for (stable_key = 1; stable_key <= tgt_free; stable_key++) { /* Mark the ref bit */ - assert(!bpf_map_lookup_elem(lru_map_fd, &stable_key, - value)); + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, + stable_key, value)); } assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); @@ -612,6 +678,198 @@ static void test_lru_sanity6(int map_type, int map_flags, int tgt_free) printf("Pass\n"); } +/* Size of the LRU map is 2 + * Add key=1 (+1 key) + * Add key=2 (+1 key) + * Lookup Key=1 (datapath) + * Lookup Key=2 (syscall) + * Add Key=3 + * => Key=2 will be removed by LRU + * Iterate map. Only found key=1 and key=3 + */ +static void test_lru_sanity7(int map_type, int map_flags) +{ + unsigned long long key, value[nr_cpus]; + int lru_map_fd, expected_map_fd; + int next_cpu = 0; + + printf("%s (map_type:%d map_flags:0x%X): ", __func__, map_type, + map_flags); + + assert(sched_next_online(0, &next_cpu) != -1); + + if (map_flags & BPF_F_NO_COMMON_LRU) + lru_map_fd = create_map(map_type, map_flags, 2 * nr_cpus); + else + lru_map_fd = create_map(map_type, map_flags, 2); + assert(lru_map_fd != -1); + + expected_map_fd = create_map(BPF_MAP_TYPE_HASH, 0, 2); + assert(expected_map_fd != -1); + + value[0] = 1234; + + /* insert key=1 element */ + + key = 1; + assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); + assert(!bpf_map_update_elem(expected_map_fd, &key, value, + BPF_NOEXIST)); + + /* BPF_NOEXIST means: add new element if it doesn't exist */ + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -1 + /* key=1 already exists */ + && errno == EEXIST); + + /* insert key=2 element */ + + /* check that key=2 is not found */ + key = 2; + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); + + /* BPF_EXIST means: update existing element */ + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -1 && + /* key=2 is not there */ + errno == ENOENT); + + assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); + + /* insert key=3 element */ + + /* check that key=3 is not found */ + key = 3; + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); + + /* check that key=1 can be found and mark the ref bit to + * stop LRU from removing key=1 + */ + key = 1; + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); + assert(value[0] == 1234); + + /* check that key=2 can be found and do _not_ mark ref bit. + * this will be evicted on next update. + */ + key = 2; + assert(!bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(value[0] == 1234); + + key = 3; + assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); + assert(!bpf_map_update_elem(expected_map_fd, &key, value, + BPF_NOEXIST)); + + /* key=2 has been removed from the LRU */ + key = 2; + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); + + assert(map_equal(lru_map_fd, expected_map_fd)); + + close(expected_map_fd); + close(lru_map_fd); + + printf("Pass\n"); +} + +/* Size of the LRU map is 2 + * Add key=1 (+1 key) + * Add key=2 (+1 key) + * Lookup Key=1 (syscall) + * Lookup Key=2 (datapath) + * Add Key=3 + * => Key=1 will be removed by LRU + * Iterate map. Only found key=2 and key=3 + */ +static void test_lru_sanity8(int map_type, int map_flags) +{ + unsigned long long key, value[nr_cpus]; + int lru_map_fd, expected_map_fd; + int next_cpu = 0; + + printf("%s (map_type:%d map_flags:0x%X): ", __func__, map_type, + map_flags); + + assert(sched_next_online(0, &next_cpu) != -1); + + if (map_flags & BPF_F_NO_COMMON_LRU) + lru_map_fd = create_map(map_type, map_flags, 2 * nr_cpus); + else + lru_map_fd = create_map(map_type, map_flags, 2); + assert(lru_map_fd != -1); + + expected_map_fd = create_map(BPF_MAP_TYPE_HASH, 0, 2); + assert(expected_map_fd != -1); + + value[0] = 1234; + + /* insert key=1 element */ + + key = 1; + assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); + + /* BPF_NOEXIST means: add new element if it doesn't exist */ + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST) == -1 + /* key=1 already exists */ + && errno == EEXIST); + + /* insert key=2 element */ + + /* check that key=2 is not found */ + key = 2; + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); + + /* BPF_EXIST means: update existing element */ + assert(bpf_map_update_elem(lru_map_fd, &key, value, BPF_EXIST) == -1 && + /* key=2 is not there */ + errno == ENOENT); + + assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); + assert(!bpf_map_update_elem(expected_map_fd, &key, value, + BPF_NOEXIST)); + + /* insert key=3 element */ + + /* check that key=3 is not found */ + key = 3; + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); + + /* check that key=1 can be found and do _not_ mark ref bit. + * this will be evicted on next update. + */ + key = 1; + assert(!bpf_map_lookup_elem(lru_map_fd, &key, value)); + assert(value[0] == 1234); + + /* check that key=2 can be found and mark the ref bit to + * stop LRU from removing key=2 + */ + key = 2; + assert(!bpf_map_lookup_elem_with_ref_bit(lru_map_fd, key, value)); + assert(value[0] == 1234); + + key = 3; + assert(!bpf_map_update_elem(lru_map_fd, &key, value, BPF_NOEXIST)); + assert(!bpf_map_update_elem(expected_map_fd, &key, value, + BPF_NOEXIST)); + + /* key=1 has been removed from the LRU */ + key = 1; + assert(bpf_map_lookup_elem(lru_map_fd, &key, value) == -1 && + errno == ENOENT); + + assert(map_equal(lru_map_fd, expected_map_fd)); + + close(expected_map_fd); + close(lru_map_fd); + + printf("Pass\n"); +} + int main(int argc, char **argv) { int map_types[] = {BPF_MAP_TYPE_LRU_HASH, @@ -637,6 +895,8 @@ int main(int argc, char **argv) test_lru_sanity4(map_types[t], map_flags[f], tgt_free); test_lru_sanity5(map_types[t], map_flags[f]); test_lru_sanity6(map_types[t], map_flags[f], tgt_free); + test_lru_sanity7(map_types[t], map_flags[f]); + test_lru_sanity8(map_types[t], map_flags[f]); printf("\n"); } diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh index d4d3391cc13a..acf7a74f97cd 100755 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh @@ -129,6 +129,24 @@ setup() ip link set veth7 netns ${NS2} ip link set veth8 netns ${NS3} + if [ ! -z "${VRF}" ] ; then + ip -netns ${NS1} link add red type vrf table 1001 + ip -netns ${NS1} link set red up + ip -netns ${NS1} route add table 1001 unreachable default metric 8192 + ip -netns ${NS1} -6 route add table 1001 unreachable default metric 8192 + ip -netns ${NS1} link set veth1 vrf red + ip -netns ${NS1} link set veth5 vrf red + + ip -netns ${NS2} link add red type vrf table 1001 + ip -netns ${NS2} link set red up + ip -netns ${NS2} route add table 1001 unreachable default metric 8192 + ip -netns ${NS2} -6 route add table 1001 unreachable default metric 8192 + ip -netns ${NS2} link set veth2 vrf red + ip -netns ${NS2} link set veth3 vrf red + ip -netns ${NS2} link set veth6 vrf red + ip -netns ${NS2} link set veth7 vrf red + fi + # configure addesses: the top route (1-2-3-4) ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1 ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2 @@ -163,29 +181,29 @@ setup() # NS1 # top route - ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 - ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} # go top by default - ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 - ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} # go top by default + ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ${VRF} + ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} ${VRF} # go top by default + ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ${VRF} + ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} ${VRF} # go top by default # bottom route - ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 - ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} - ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} - ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 - ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} - ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} + ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ${VRF} + ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ${VRF} + ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ${VRF} + ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ${VRF} + ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ${VRF} + ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} ${VRF} # NS2 # top route - ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 - ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 - ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 - ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 + ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ${VRF} + ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ${VRF} + ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ${VRF} + ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 ${VRF} # bottom route - ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 - ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 - ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 - ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 + ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ${VRF} + ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ${VRF} + ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ${VRF} + ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 ${VRF} # NS3 # top route @@ -207,16 +225,16 @@ setup() ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 ip -netns ${NS3} link set gre_dev up ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev - ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} - ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} + ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF} + ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} ${VRF} # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 ip -netns ${NS3} link set gre6_dev up ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev - ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} - ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} + ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} + ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} # rp_filter gets confused by what these tests are doing, so disable it ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 @@ -244,18 +262,18 @@ trap cleanup EXIT remove_routes_to_gredev() { - ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 - ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 - ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 - ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 + ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ${VRF} + ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ${VRF} + ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ${VRF} + ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 ${VRF} } add_unreachable_routes_to_gredev() { - ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 - ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 - ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 - ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 + ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ${VRF} + ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ${VRF} + ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} + ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} } test_ping() @@ -265,10 +283,10 @@ test_ping() local RET=0 if [ "${PROTO}" == "IPv4" ] ; then - ip netns exec ${NS1} ping -c 1 -W 1 -I ${IPv4_SRC} ${IPv4_DST} 2>&1 > /dev/null + ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null RET=$? elif [ "${PROTO}" == "IPv6" ] ; then - ip netns exec ${NS1} ping6 -c 1 -W 6 -I ${IPv6_SRC} ${IPv6_DST} 2>&1 > /dev/null + ip netns exec ${NS1} ping6 -c 1 -W 6 -I veth1 ${IPv6_DST} 2>&1 > /dev/null RET=$? else echo " test_ping: unknown PROTO: ${PROTO}" @@ -328,7 +346,7 @@ test_gso() test_egress() { local readonly ENCAP=$1 - echo "starting egress ${ENCAP} encap test" + echo "starting egress ${ENCAP} encap test ${VRF}" setup # by default, pings work @@ -336,26 +354,35 @@ test_egress() test_ping IPv6 0 # remove NS2->DST routes, ping fails - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 + ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} + ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} test_ping IPv4 1 test_ping IPv6 1 # install replacement routes (LWT/eBPF), pings succeed if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre dev veth1 - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre dev veth1 + ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ + test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF} + ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ + test_lwt_ip_encap.o sec encap_gre dev veth1 ${VRF} elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre6 dev veth1 - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj test_lwt_ip_encap.o sec encap_gre6 dev veth1 + ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ + test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF} + ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ + test_lwt_ip_encap.o sec encap_gre6 dev veth1 ${VRF} else echo " unknown encap ${ENCAP}" TEST_STATUS=1 fi test_ping IPv4 0 test_ping IPv6 0 - test_gso IPv4 - test_gso IPv6 + + # skip GSO tests with VRF: VRF routing needs properly assigned + # source IP/device, which is easy to do with ping and hard with dd/nc. + if [ -z "${VRF}" ] ; then + test_gso IPv4 + test_gso IPv6 + fi # a negative test: remove routes to GRE devices: ping fails remove_routes_to_gredev @@ -374,7 +401,7 @@ test_egress() test_ingress() { local readonly ENCAP=$1 - echo "starting ingress ${ENCAP} encap test" + echo "starting ingress ${ENCAP} encap test ${VRF}" setup # need to wait a bit for IPv6 to autoconf, otherwise @@ -385,18 +412,22 @@ test_ingress() test_ping IPv6 0 # remove NS2->DST routes, pings fail - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 + ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} + ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} test_ping IPv4 1 test_ping IPv6 1 # install replacement routes (LWT/eBPF), pings succeed if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre dev veth2 - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre dev veth2 + ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ + test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF} + ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ + test_lwt_ip_encap.o sec encap_gre dev veth2 ${VRF} elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre6 dev veth2 - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj test_lwt_ip_encap.o sec encap_gre6 dev veth2 + ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ + test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF} + ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ + test_lwt_ip_encap.o sec encap_gre6 dev veth2 ${VRF} else echo "FAIL: unknown encap ${ENCAP}" TEST_STATUS=1 @@ -418,6 +449,13 @@ test_ingress() process_test_results } +VRF="" +test_egress IPv4 +test_egress IPv6 +test_ingress IPv4 +test_ingress IPv6 + +VRF="vrf red" test_egress IPv4 test_egress IPv6 test_ingress IPv4 diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c index 3c627771f965..246f745cb006 100644 --- a/tools/testing/selftests/bpf/test_maps.c +++ b/tools/testing/selftests/bpf/test_maps.c @@ -27,6 +27,7 @@ #include "bpf_util.h" #include "bpf_rlimit.h" +#include "test_maps.h" #ifndef ENOTSUPP #define ENOTSUPP 524 @@ -36,15 +37,6 @@ static int skips; static int map_flags; -#define CHECK(condition, tag, format...) ({ \ - int __ret = !!(condition); \ - if (__ret) { \ - printf("%s(%d):FAIL:%s ", __func__, __LINE__, tag); \ - printf(format); \ - exit(-1); \ - } \ -}) - static void test_hashmap(unsigned int task, void *data) { long long key, next_key, first_key, value; @@ -1703,6 +1695,10 @@ static void run_all_tests(void) test_map_in_map(); } +#define DECLARE +#include <map_tests/tests.h> +#undef DECLARE + int main(void) { srand(time(NULL)); @@ -1713,6 +1709,10 @@ int main(void) map_flags = BPF_F_NO_PREALLOC; run_all_tests(); +#define CALL +#include <map_tests/tests.h> +#undef CALL + printf("test_maps: OK, %d SKIPPED\n", skips); return 0; } diff --git a/tools/testing/selftests/bpf/test_maps.h b/tools/testing/selftests/bpf/test_maps.h new file mode 100644 index 000000000000..77d8587ac4ed --- /dev/null +++ b/tools/testing/selftests/bpf/test_maps.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _TEST_MAPS_H +#define _TEST_MAPS_H + +#include <stdio.h> +#include <stdlib.h> + +#define CHECK(condition, tag, format...) ({ \ + int __ret = !!(condition); \ + if (__ret) { \ + printf("%s(%d):FAIL:%s ", __func__, __LINE__, tag); \ + printf(format); \ + exit(-1); \ + } \ +}) + +#endif diff --git a/tools/testing/selftests/bpf/test_offload.py b/tools/testing/selftests/bpf/test_offload.py index 84bea3985d64..425f9ed27c3b 100755 --- a/tools/testing/selftests/bpf/test_offload.py +++ b/tools/testing/selftests/bpf/test_offload.py @@ -1,6 +1,7 @@ #!/usr/bin/python3 # Copyright (C) 2017 Netronome Systems, Inc. +# Copyright (c) 2019 Mellanox Technologies. All rights reserved # # This software is licensed under the GNU General License Version 2, # June 1991 as shown in the file COPYING in the top-level directory of this @@ -15,10 +16,12 @@ from datetime import datetime import argparse +import errno import json import os import pprint import random +import re import string import struct import subprocess @@ -306,6 +309,8 @@ class DebugfsDir: _, out = cmd('ls ' + path) for f in out.split(): + if f == "ports": + continue p = os.path.join(path, f) if os.path.isfile(p): _, out = cmd('cat %s/%s' % (path, f)) @@ -321,42 +326,112 @@ class DebugfsDir: return dfs -class NetdevSim: +class NetdevSimDev: """ - Class for netdevsim netdevice and its attributes. + Class for netdevsim bus device and its attributes. """ - def __init__(self, link=None): - self.link = link + def __init__(self, port_count=1): + addr = 0 + while True: + try: + with open("/sys/bus/netdevsim/new_device", "w") as f: + f.write("%u %u" % (addr, port_count)) + except OSError as e: + if e.errno == errno.ENOSPC: + addr += 1 + continue + raise e + break + self.addr = addr + + # As probe of netdevsim device might happen from a workqueue, + # so wait here until all netdevs appear. + self.wait_for_netdevs(port_count) + + ret, out = cmd("udevadm settle", fail=False) + if ret: + raise Exception("udevadm settle failed") + ifnames = self.get_ifnames() - self.dev = self._netdevsim_create() devs.append(self) + self.dfs_dir = "/sys/kernel/debug/netdevsim/netdevsim%u/" % addr + + self.nsims = [] + for port_index in range(port_count): + self.nsims.append(NetdevSim(self, port_index, ifnames[port_index])) + + def get_ifnames(self): + ifnames = [] + listdir = os.listdir("/sys/bus/netdevsim/devices/netdevsim%u/net/" % self.addr) + for ifname in listdir: + ifnames.append(ifname) + ifnames.sort() + return ifnames + + def wait_for_netdevs(self, port_count): + timeout = 5 + timeout_start = time.time() + + while True: + try: + ifnames = self.get_ifnames() + except FileNotFoundError as e: + ifnames = [] + if len(ifnames) == port_count: + break + if time.time() < timeout_start + timeout: + continue + raise Exception("netdevices did not appear within timeout") - self.ns = "" + def dfs_num_bound_progs(self): + path = os.path.join(self.dfs_dir, "bpf_bound_progs") + _, progs = cmd('ls %s' % (path)) + return len(progs.split()) - self.dfs_dir = '/sys/kernel/debug/netdevsim/%s' % (self.dev['ifname']) - self.sdev_dir = self.dfs_dir + '/sdev/' - self.dfs_refresh() + def dfs_get_bound_progs(self, expected): + progs = DebugfsDir(os.path.join(self.dfs_dir, "bpf_bound_progs")) + if expected is not None: + if len(progs) != expected: + fail(True, "%d BPF programs bound, expected %d" % + (len(progs), expected)) + return progs - def __getitem__(self, key): - return self.dev[key] + def remove(self): + with open("/sys/bus/netdevsim/del_device", "w") as f: + f.write("%u" % self.addr) + devs.remove(self) - def _netdevsim_create(self): - link = "" if self.link is None else "link " + self.link.dev['ifname'] - _, old = ip("link show") - ip("link add sim%d {link} type netdevsim".format(link=link)) - _, new = ip("link show") + def remove_nsim(self, nsim): + self.nsims.remove(nsim) + with open("/sys/bus/netdevsim/devices/netdevsim%u/del_port" % self.addr ,"w") as f: + f.write("%u" % nsim.port_index) - for dev in new: - f = filter(lambda x: x["ifname"] == dev["ifname"], old) - if len(list(f)) == 0: - return dev +class NetdevSim: + """ + Class for netdevsim netdevice and its attributes. + """ + + def __init__(self, nsimdev, port_index, ifname): + # In case udev renamed the netdev to according to new schema, + # check if the name matches the port_index. + nsimnamere = re.compile("eni\d+np(\d+)") + match = nsimnamere.match(ifname) + if match and int(match.groups()[0]) != port_index + 1: + raise Exception("netdevice name mismatches the expected one") + + self.nsimdev = nsimdev + self.port_index = port_index + self.ns = "" + self.dfs_dir = "%s/ports/%u/" % (nsimdev.dfs_dir, port_index) + self.dfs_refresh() + _, [self.dev] = ip("link show dev %s" % ifname) - raise Exception("failed to create netdevsim device") + def __getitem__(self, key): + return self.dev[key] def remove(self): - devs.remove(self) - ip("link del dev %s" % (self.dev["ifname"]), ns=self.ns) + self.nsimdev.remove_nsim(self) def dfs_refresh(self): self.dfs = DebugfsDir(self.dfs_dir) @@ -367,22 +442,9 @@ class NetdevSim: _, data = cmd('cat %s' % (path)) return data.strip() - def dfs_num_bound_progs(self): - path = os.path.join(self.sdev_dir, "bpf_bound_progs") - _, progs = cmd('ls %s' % (path)) - return len(progs.split()) - - def dfs_get_bound_progs(self, expected): - progs = DebugfsDir(os.path.join(self.sdev_dir, "bpf_bound_progs")) - if expected is not None: - if len(progs) != expected: - fail(True, "%d BPF programs bound, expected %d" % - (len(progs), expected)) - return progs - def wait_for_flush(self, bound=0, total=0, n_retry=20): for i in range(n_retry): - nbound = self.dfs_num_bound_progs() + nbound = self.nsimdev.dfs_num_bound_progs() nprogs = len(bpftool_prog_list()) if nbound == bound and nprogs == total: return @@ -612,7 +674,7 @@ def test_spurios_extack(sim, obj, skip_hw, needle): include_stderr=True) check_no_extack(res, needle) -def test_multi_prog(sim, obj, modename, modeid): +def test_multi_prog(simdev, sim, obj, modename, modeid): start_test("Test multi-attachment XDP - %s + offload..." % (modename or "default", )) sim.set_xdp(obj, "offload") @@ -668,11 +730,12 @@ def test_multi_prog(sim, obj, modename, modeid): check_multi_basic(two_xdps) start_test("Test multi-attachment XDP - device remove...") - sim.remove() + simdev.remove() - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims sim.set_ethtool_tc_offloads(True) - return sim + return [simdev, sim] # Parse command line parser = argparse.ArgumentParser() @@ -729,12 +792,14 @@ try: bytecode = bpf_bytecode("1,6 0 0 4294967295,") start_test("Test destruction of generic XDP...") - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims sim.set_xdp(obj, "generic") - sim.remove() + simdev.remove() bpftool_prog_list_wait(expected=0) - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims sim.tc_add_ingress() start_test("Test TC non-offloaded...") @@ -744,7 +809,7 @@ try: start_test("Test TC non-offloaded isn't getting bound...") ret, _ = sim.cls_bpf_add_filter(obj, fail=False) fail(ret != 0, "Software TC filter did not load") - sim.dfs_get_bound_progs(expected=0) + simdev.dfs_get_bound_progs(expected=0) sim.tc_flush_filters() @@ -761,7 +826,7 @@ try: start_test("Test TC offload by default...") ret, _ = sim.cls_bpf_add_filter(obj, fail=False) fail(ret != 0, "Software TC filter did not load") - sim.dfs_get_bound_progs(expected=0) + simdev.dfs_get_bound_progs(expected=0) ingress = sim.tc_show_ingress(expected=1) fltr = ingress[0] fail(not fltr["in_hw"], "Filter not offloaded by default") @@ -771,7 +836,7 @@ try: start_test("Test TC cBPF bytcode tries offload by default...") ret, _ = sim.cls_bpf_add_filter(bytecode, fail=False) fail(ret != 0, "Software TC filter did not load") - sim.dfs_get_bound_progs(expected=0) + simdev.dfs_get_bound_progs(expected=0) ingress = sim.tc_show_ingress(expected=1) fltr = ingress[0] fail(not fltr["in_hw"], "Bytecode not offloaded by default") @@ -839,7 +904,7 @@ try: check_verifier_log(err, "[netdevsim] Hello from netdevsim!") start_test("Test TC offload basics...") - dfs = sim.dfs_get_bound_progs(expected=1) + dfs = simdev.dfs_get_bound_progs(expected=1) progs = bpftool_prog_list(expected=1) ingress = sim.tc_show_ingress(expected=1) @@ -874,18 +939,20 @@ try: start_test("Test destroying device gets rid of TC filters...") sim.cls_bpf_add_filter(obj, skip_sw=True) - sim.remove() + simdev.remove() bpftool_prog_list_wait(expected=0) - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims sim.set_ethtool_tc_offloads(True) start_test("Test destroying device gets rid of XDP...") sim.set_xdp(obj, "offload") - sim.remove() + simdev.remove() bpftool_prog_list_wait(expected=0) - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims sim.set_ethtool_tc_offloads(True) start_test("Test XDP prog reporting...") @@ -971,7 +1038,7 @@ try: check_verifier_log(err, "[netdevsim] Hello from netdevsim!") start_test("Test XDP offload is device bound...") - dfs = sim.dfs_get_bound_progs(expected=1) + dfs = simdev.dfs_get_bound_progs(expected=1) dprog = dfs[0] fail(prog["id"] != link_xdp["id"], "Program IDs don't match") @@ -990,7 +1057,8 @@ try: bpftool_prog_list_wait(expected=0) start_test("Test attempt to use a program for a wrong device...") - sim2 = NetdevSim() + simdev2 = NetdevSimDev() + sim2, = simdev2.nsims sim2.set_xdp(obj, "offload") pin_file, pinned = pin_prog("/sys/fs/bpf/tmp") @@ -998,7 +1066,7 @@ try: fail=False, include_stderr=True) fail(ret == 0, "Pinned program loaded for a different device accepted") check_extack_nsim(err, "program bound to different dev.", args) - sim2.remove() + simdev2.remove() ret, _, err = sim.set_xdp(pinned, "offload", fail=False, include_stderr=True) fail(ret == 0, "Pinned program loaded for a removed device accepted") @@ -1006,9 +1074,9 @@ try: rm(pin_file) bpftool_prog_list_wait(expected=0) - sim = test_multi_prog(sim, obj, "", 1) - sim = test_multi_prog(sim, obj, "drv", 1) - sim = test_multi_prog(sim, obj, "generic", 2) + simdev, sim = test_multi_prog(simdev, sim, obj, "", 1) + simdev, sim = test_multi_prog(simdev, sim, obj, "drv", 1) + simdev, sim = test_multi_prog(simdev, sim, obj, "generic", 2) start_test("Test mixing of TC and XDP...") sim.tc_add_ingress() @@ -1055,15 +1123,15 @@ try: start_test("Test if netdev removal waits for translation...") delay_msec = 500 - sim.dfs["bpf_bind_verifier_delay"] = delay_msec + sim.dfs["dev/bpf_bind_verifier_delay"] = delay_msec start = time.time() cmd_line = "tc filter add dev %s ingress bpf %s da skip_sw" % \ (sim['ifname'], obj) tc_proc = cmd(cmd_line, background=True, fail=False) # Wait for the verifier to start - while sim.dfs_num_bound_progs() <= 2: + while simdev.dfs_num_bound_progs() <= 2: pass - sim.remove() + simdev.remove() end = time.time() ret, _ = cmd_result(tc_proc, fail=False) time_diff = end - start @@ -1078,7 +1146,8 @@ try: clean_up() bpftool_prog_list_wait(expected=0) - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims map_obj = bpf_obj("sample_map_ret0.o") start_test("Test loading program with maps...") sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON @@ -1100,7 +1169,7 @@ try: prog_file, _ = pin_prog("/sys/fs/bpf/tmp_prog") map_file, _ = pin_map("/sys/fs/bpf/tmp_map", idx=1, expected=2) - sim.remove() + simdev.remove() start_test("Test bpftool bound info reporting (removed dev)...") check_dev_info_removed(prog_file=prog_file, map_file=map_file) @@ -1109,7 +1178,8 @@ try: clean_up() bpftool_prog_list_wait(expected=0) - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims start_test("Test map update (no flags)...") sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON @@ -1190,27 +1260,29 @@ try: start_test("Test map remove...") sim.unset_xdp("offload") bpftool_map_list_wait(expected=0) - sim.remove() + simdev.remove() - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims sim.set_xdp(map_obj, "offload", JSON=False) # map fixup msg breaks JSON - sim.remove() + simdev.remove() bpftool_map_list_wait(expected=0) start_test("Test map creation fail path...") - sim = NetdevSim() + simdev = NetdevSimDev() + sim, = simdev.nsims sim.dfs["bpf_map_accept"] = "N" ret, _ = sim.set_xdp(map_obj, "offload", JSON=False, fail=False) fail(ret == 0, "netdevsim didn't refuse to create a map with offload disabled") - sim.remove() + simdev.remove() start_test("Test multi-dev ASIC program reuse...") - simA = NetdevSim() - simB1 = NetdevSim() - simB2 = NetdevSim(link=simB1) - simB3 = NetdevSim(link=simB1) + simdevA = NetdevSimDev() + simA, = simdevA.nsims + simdevB = NetdevSimDev(3) + simB1, simB2, simB3 = simdevB.nsims sims = (simA, simB1, simB2, simB3) simB = (simB1, simB2, simB3) @@ -1222,13 +1294,13 @@ try: progB = bpf_pinned("/sys/fs/bpf/nsimB") simA.set_xdp(progA, "offload", JSON=False) - for d in simB: + for d in simdevB.nsims: d.set_xdp(progB, "offload", JSON=False) start_test("Test multi-dev ASIC cross-dev replace...") ret, _ = simA.set_xdp(progB, "offload", force=True, JSON=False, fail=False) fail(ret == 0, "cross-ASIC program allowed") - for d in simB: + for d in simdevB.nsims: ret, _ = d.set_xdp(progA, "offload", force=True, JSON=False, fail=False) fail(ret == 0, "cross-ASIC program allowed") @@ -1240,7 +1312,7 @@ try: fail=False, include_stderr=True) fail(ret == 0, "cross-ASIC program allowed") check_extack_nsim(err, "program bound to different dev.", args) - for d in simB: + for d in simdevB.nsims: ret, _, err = d.set_xdp(progA, "offload", force=True, JSON=False, fail=False, include_stderr=True) fail(ret == 0, "cross-ASIC program allowed") @@ -1277,7 +1349,7 @@ try: start_test("Test multi-dev ASIC cross-dev destruction...") bpftool_prog_list_wait(expected=2) - simA.remove() + simdevA.remove() bpftool_prog_list_wait(expected=1) ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"] @@ -1295,6 +1367,7 @@ try: fail(ifnameB != simB3['ifname'], "program not bound to remaining device") simB3.remove() + simdevB.remove() bpftool_prog_list_wait(expected=0) start_test("Test multi-dev ASIC cross-dev destruction - orphaned...") diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c index 5d10aee9e277..bf5c90998916 100644 --- a/tools/testing/selftests/bpf/test_progs.c +++ b/tools/testing/selftests/bpf/test_progs.c @@ -9,6 +9,7 @@ int error_cnt, pass_cnt; bool jit_enabled; +bool verifier_stats = false; struct ipv4_packet pkt_v4 = { .eth.h_proto = __bpf_constant_htons(ETH_P_IP), @@ -162,12 +163,15 @@ void *spin_lock_thread(void *arg) #include <prog_tests/tests.h> #undef DECLARE -int main(void) +int main(int ac, char **av) { srand(time(NULL)); jit_enabled = is_jit_enabled(); + if (ac == 2 && strcmp(av[1], "-s") == 0) + verifier_stats = true; + #define CALL #include <prog_tests/tests.h> #undef CALL diff --git a/tools/testing/selftests/bpf/test_progs.h b/tools/testing/selftests/bpf/test_progs.h index 51a07367cd43..f095e1d4c657 100644 --- a/tools/testing/selftests/bpf/test_progs.h +++ b/tools/testing/selftests/bpf/test_progs.h @@ -40,6 +40,7 @@ typedef __u16 __sum16; extern int error_cnt, pass_cnt; extern bool jit_enabled; +extern bool verifier_stats; #define MAGIC_BYTES 123 diff --git a/tools/testing/selftests/bpf/test_section_names.c b/tools/testing/selftests/bpf/test_section_names.c index 7c4f41572b1c..bebd4fbca1f4 100644 --- a/tools/testing/selftests/bpf/test_section_names.c +++ b/tools/testing/selftests/bpf/test_section_names.c @@ -119,6 +119,11 @@ static struct sec_name_test tests[] = { {0, BPF_PROG_TYPE_CGROUP_SOCK_ADDR, BPF_CGROUP_UDP6_SENDMSG}, {0, BPF_CGROUP_UDP6_SENDMSG}, }, + { + "cgroup/sysctl", + {0, BPF_PROG_TYPE_CGROUP_SYSCTL, BPF_CGROUP_SYSCTL}, + {0, BPF_CGROUP_SYSCTL}, + }, }; static int test_prog_type_by_name(const struct sec_name_test *test) diff --git a/tools/testing/selftests/bpf/test_sock_fields.c b/tools/testing/selftests/bpf/test_sock_fields.c index dcae7f664dce..e089477fa0a3 100644 --- a/tools/testing/selftests/bpf/test_sock_fields.c +++ b/tools/testing/selftests/bpf/test_sock_fields.c @@ -35,6 +35,11 @@ enum bpf_linum_array_idx { __NR_BPF_LINUM_ARRAY_IDX, }; +struct bpf_spinlock_cnt { + struct bpf_spin_lock lock; + __u32 cnt; +}; + #define CHECK(condition, tag, format...) ({ \ int __ret = !!(condition); \ if (__ret) { \ @@ -50,6 +55,8 @@ enum bpf_linum_array_idx { #define DATA_LEN sizeof(DATA) static struct sockaddr_in6 srv_sa6, cli_sa6; +static int sk_pkt_out_cnt10_fd; +static int sk_pkt_out_cnt_fd; static int linum_map_fd; static int addr_map_fd; static int tp_map_fd; @@ -220,28 +227,90 @@ static void check_result(void) "Unexpected listen_tp", "Check listen_tp output. ingress_linum:%u", ingress_linum); - CHECK(srv_tp.data_segs_out != 1 || + CHECK(srv_tp.data_segs_out != 2 || srv_tp.data_segs_in || srv_tp.snd_cwnd != 10 || srv_tp.total_retrans || - srv_tp.bytes_acked != DATA_LEN, + srv_tp.bytes_acked != 2 * DATA_LEN, "Unexpected srv_tp", "Check srv_tp output. egress_linum:%u", egress_linum); CHECK(cli_tp.data_segs_out || - cli_tp.data_segs_in != 1 || + cli_tp.data_segs_in != 2 || cli_tp.snd_cwnd != 10 || cli_tp.total_retrans || - cli_tp.bytes_received != DATA_LEN, + cli_tp.bytes_received != 2 * DATA_LEN, "Unexpected cli_tp", "Check cli_tp output. egress_linum:%u", egress_linum); } +static void check_sk_pkt_out_cnt(int accept_fd, int cli_fd) +{ + struct bpf_spinlock_cnt pkt_out_cnt = {}, pkt_out_cnt10 = {}; + int err; + + pkt_out_cnt.cnt = ~0; + pkt_out_cnt10.cnt = ~0; + err = bpf_map_lookup_elem(sk_pkt_out_cnt_fd, &accept_fd, &pkt_out_cnt); + if (!err) + err = bpf_map_lookup_elem(sk_pkt_out_cnt10_fd, &accept_fd, + &pkt_out_cnt10); + + /* The bpf prog only counts for fullsock and + * passive conneciton did not become fullsock until 3WHS + * had been finished. + * The bpf prog only counted two data packet out but we + * specially init accept_fd's pkt_out_cnt by 2 in + * init_sk_storage(). Hence, 4 here. + */ + CHECK(err || pkt_out_cnt.cnt != 4 || pkt_out_cnt10.cnt != 40, + "bpf_map_lookup_elem(sk_pkt_out_cnt, &accept_fd)", + "err:%d errno:%d pkt_out_cnt:%u pkt_out_cnt10:%u", + err, errno, pkt_out_cnt.cnt, pkt_out_cnt10.cnt); + + pkt_out_cnt.cnt = ~0; + pkt_out_cnt10.cnt = ~0; + err = bpf_map_lookup_elem(sk_pkt_out_cnt_fd, &cli_fd, &pkt_out_cnt); + if (!err) + err = bpf_map_lookup_elem(sk_pkt_out_cnt10_fd, &cli_fd, + &pkt_out_cnt10); + /* Active connection is fullsock from the beginning. + * 1 SYN and 1 ACK during 3WHS + * 2 Acks on data packet. + * + * The bpf_prog initialized it to 0xeB9F. + */ + CHECK(err || pkt_out_cnt.cnt != 0xeB9F + 4 || + pkt_out_cnt10.cnt != 0xeB9F + 40, + "bpf_map_lookup_elem(sk_pkt_out_cnt, &cli_fd)", + "err:%d errno:%d pkt_out_cnt:%u pkt_out_cnt10:%u", + err, errno, pkt_out_cnt.cnt, pkt_out_cnt10.cnt); +} + +static void init_sk_storage(int sk_fd, __u32 pkt_out_cnt) +{ + struct bpf_spinlock_cnt scnt = {}; + int err; + + scnt.cnt = pkt_out_cnt; + err = bpf_map_update_elem(sk_pkt_out_cnt_fd, &sk_fd, &scnt, + BPF_NOEXIST); + CHECK(err, "bpf_map_update_elem(sk_pkt_out_cnt_fd)", + "err:%d errno:%d", err, errno); + + scnt.cnt *= 10; + err = bpf_map_update_elem(sk_pkt_out_cnt10_fd, &sk_fd, &scnt, + BPF_NOEXIST); + CHECK(err, "bpf_map_update_elem(sk_pkt_out_cnt10_fd)", + "err:%d errno:%d", err, errno); +} + static void test(void) { int listen_fd, cli_fd, accept_fd, epfd, err; struct epoll_event ev; socklen_t addrlen; + int i; addrlen = sizeof(struct sockaddr_in6); ev.events = EPOLLIN; @@ -308,24 +377,30 @@ static void test(void) accept_fd, errno); close(listen_fd); - /* Send some data from accept_fd to cli_fd */ - err = send(accept_fd, DATA, DATA_LEN, 0); - CHECK(err != DATA_LEN, "send(accept_fd)", "err:%d errno:%d", - err, errno); - - /* Have some timeout in recv(cli_fd). Just in case. */ ev.data.fd = cli_fd; err = epoll_ctl(epfd, EPOLL_CTL_ADD, cli_fd, &ev); CHECK(err, "epoll_ctl(EPOLL_CTL_ADD, cli_fd)", "err:%d errno:%d", err, errno); - err = epoll_wait(epfd, &ev, 1, 1000); - CHECK(err != 1 || ev.data.fd != cli_fd, - "epoll_wait(cli_fd)", "err:%d errno:%d ev.data.fd:%d cli_fd:%d", - err, errno, ev.data.fd, cli_fd); + init_sk_storage(accept_fd, 2); - err = recv(cli_fd, NULL, 0, MSG_TRUNC); - CHECK(err, "recv(cli_fd)", "err:%d errno:%d", err, errno); + for (i = 0; i < 2; i++) { + /* Send some data from accept_fd to cli_fd */ + err = send(accept_fd, DATA, DATA_LEN, 0); + CHECK(err != DATA_LEN, "send(accept_fd)", "err:%d errno:%d", + err, errno); + + /* Have some timeout in recv(cli_fd). Just in case. */ + err = epoll_wait(epfd, &ev, 1, 1000); + CHECK(err != 1 || ev.data.fd != cli_fd, + "epoll_wait(cli_fd)", "err:%d errno:%d ev.data.fd:%d cli_fd:%d", + err, errno, ev.data.fd, cli_fd); + + err = recv(cli_fd, NULL, 0, MSG_TRUNC); + CHECK(err, "recv(cli_fd)", "err:%d errno:%d", err, errno); + } + + check_sk_pkt_out_cnt(accept_fd, cli_fd); close(epfd); close(accept_fd); @@ -395,6 +470,14 @@ int main(int argc, char **argv) CHECK(!map, "cannot find linum_map", "(null)"); linum_map_fd = bpf_map__fd(map); + map = bpf_object__find_map_by_name(obj, "sk_pkt_out_cnt"); + CHECK(!map, "cannot find sk_pkt_out_cnt", "(null)"); + sk_pkt_out_cnt_fd = bpf_map__fd(map); + + map = bpf_object__find_map_by_name(obj, "sk_pkt_out_cnt10"); + CHECK(!map, "cannot find sk_pkt_out_cnt10", "(null)"); + sk_pkt_out_cnt10_fd = bpf_map__fd(map); + test(); bpf_object__close(obj); diff --git a/tools/testing/selftests/bpf/test_sysctl.c b/tools/testing/selftests/bpf/test_sysctl.c new file mode 100644 index 000000000000..a3bebd7c68dd --- /dev/null +++ b/tools/testing/selftests/bpf/test_sysctl.c @@ -0,0 +1,1567 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Facebook + +#include <fcntl.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include <linux/filter.h> + +#include <bpf/bpf.h> +#include <bpf/libbpf.h> + +#include "bpf_rlimit.h" +#include "bpf_util.h" +#include "cgroup_helpers.h" + +#define CG_PATH "/foo" +#define MAX_INSNS 512 +#define FIXUP_SYSCTL_VALUE 0 + +char bpf_log_buf[BPF_LOG_BUF_SIZE]; + +struct sysctl_test { + const char *descr; + size_t fixup_value_insn; + struct bpf_insn insns[MAX_INSNS]; + const char *prog_file; + enum bpf_attach_type attach_type; + const char *sysctl; + int open_flags; + const char *newval; + const char *oldval; + enum { + LOAD_REJECT, + ATTACH_REJECT, + OP_EPERM, + SUCCESS, + } result; +}; + +static struct sysctl_test tests[] = { + { + .descr = "sysctl wrong attach_type", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = 0, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = ATTACH_REJECT, + }, + { + .descr = "sysctl:read allow all", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl:read deny all", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = OP_EPERM, + }, + { + .descr = "ctx:write sysctl:read read ok", + .insns = { + /* If (write) */ + BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_1, + offsetof(struct bpf_sysctl, write)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 1, 2), + + /* return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_A(1), + + /* else return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "ctx:write sysctl:write read ok", + .insns = { + /* If (write) */ + BPF_LDX_MEM(BPF_B, BPF_REG_7, BPF_REG_1, + offsetof(struct bpf_sysctl, write)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 1, 2), + + /* return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_A(1), + + /* else return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/domainname", + .open_flags = O_WRONLY, + .newval = "(none)", /* same as default, should fail anyway */ + .result = OP_EPERM, + }, + { + .descr = "ctx:write sysctl:read write reject", + .insns = { + /* write = X */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, + offsetof(struct bpf_sysctl, write)), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = LOAD_REJECT, + }, + { + .descr = "ctx:file_pos sysctl:read read ok", + .insns = { + /* If (file_pos == X) */ + BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_1, + offsetof(struct bpf_sysctl, file_pos)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "ctx:file_pos sysctl:read read ok narrow", + .insns = { + /* If (file_pos == X) */ + BPF_LDX_MEM(BPF_B, BPF_REG_7, BPF_REG_1, + offsetof(struct bpf_sysctl, file_pos)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "ctx:file_pos sysctl:read write ok", + .insns = { + /* file_pos = X */ + BPF_MOV64_IMM(BPF_REG_0, 2), + BPF_STX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, + offsetof(struct bpf_sysctl, file_pos)), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .oldval = "nux\n", + .result = SUCCESS, + }, + { + .descr = "sysctl_get_name sysctl_value:base ok", + .insns = { + /* sysctl_get_name arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_name arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 8), + + /* sysctl_get_name arg4 (flags) */ + BPF_MOV64_IMM(BPF_REG_4, BPF_F_SYSCTL_BASE_NAME), + + /* sysctl_get_name(ctx, buf, buf_len, flags) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_name), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, sizeof("tcp_mem") - 1, 6), + /* buf == "tcp_mem\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x006d656d5f706374ULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_name sysctl_value:base E2BIG truncated", + .insns = { + /* sysctl_get_name arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_name arg3 (buf_len) too small */ + BPF_MOV64_IMM(BPF_REG_3, 7), + + /* sysctl_get_name arg4 (flags) */ + BPF_MOV64_IMM(BPF_REG_4, BPF_F_SYSCTL_BASE_NAME), + + /* sysctl_get_name(ctx, buf, buf_len, flags) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_name), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -E2BIG, 6), + + /* buf[0:7] == "tcp_me\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x00656d5f706374ULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_name sysctl:full ok", + .insns = { + /* sysctl_get_name arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -24), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 16), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_name arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 17), + + /* sysctl_get_name arg4 (flags) */ + BPF_MOV64_IMM(BPF_REG_4, 0), + + /* sysctl_get_name(ctx, buf, buf_len, flags) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_name), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 16, 14), + + /* buf[0:8] == "net/ipv4" && */ + BPF_LD_IMM64(BPF_REG_8, 0x347670692f74656eULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 10), + + /* buf[8:16] == "/tcp_mem" && */ + BPF_LD_IMM64(BPF_REG_8, 0x6d656d5f7063742fULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 8), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 6), + + /* buf[16:24] == "\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x0ULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 16), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_name sysctl:full E2BIG truncated", + .insns = { + /* sysctl_get_name arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -16), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 8), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_name arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 16), + + /* sysctl_get_name arg4 (flags) */ + BPF_MOV64_IMM(BPF_REG_4, 0), + + /* sysctl_get_name(ctx, buf, buf_len, flags) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_name), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -E2BIG, 10), + + /* buf[0:8] == "net/ipv4" && */ + BPF_LD_IMM64(BPF_REG_8, 0x347670692f74656eULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 6), + + /* buf[8:16] == "/tcp_me\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x00656d5f7063742fULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 8), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_name sysctl:full E2BIG truncated small", + .insns = { + /* sysctl_get_name arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_name arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 7), + + /* sysctl_get_name arg4 (flags) */ + BPF_MOV64_IMM(BPF_REG_4, 0), + + /* sysctl_get_name(ctx, buf, buf_len, flags) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_name), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -E2BIG, 6), + + /* buf[0:8] == "net/ip\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x000070692f74656eULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_current_value sysctl:read ok, gt", + .insns = { + /* sysctl_get_current_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_current_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 8), + + /* sysctl_get_current_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_current_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 6, 6), + + /* buf[0:6] == "Linux\n\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x000a78756e694cULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_current_value sysctl:read ok, eq", + .insns = { + /* sysctl_get_current_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_B, BPF_REG_7, BPF_REG_0, 7), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_current_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 7), + + /* sysctl_get_current_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_current_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 6, 6), + + /* buf[0:6] == "Linux\n\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x000a78756e694cULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_current_value sysctl:read E2BIG truncated", + .insns = { + /* sysctl_get_current_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_H, BPF_REG_7, BPF_REG_0, 6), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_current_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 6), + + /* sysctl_get_current_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_current_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -E2BIG, 6), + + /* buf[0:6] == "Linux\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x000078756e694cULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "kernel/ostype", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_current_value sysctl:read EINVAL", + .insns = { + /* sysctl_get_current_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_current_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 8), + + /* sysctl_get_current_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_current_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -EINVAL, 4), + + /* buf[0:8] is NUL-filled) */ + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 0, 2), + + /* return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_A(1), + + /* else return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv6/conf/lo/stable_secret", /* -EIO */ + .open_flags = O_RDONLY, + .result = OP_EPERM, + }, + { + .descr = "sysctl_get_current_value sysctl:write ok", + .fixup_value_insn = 6, + .insns = { + /* sysctl_get_current_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_current_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 8), + + /* sysctl_get_current_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_current_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 4, 6), + + /* buf[0:4] == expected) */ + BPF_LD_IMM64(BPF_REG_8, FIXUP_SYSCTL_VALUE), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_A(1), + + /* else return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_WRONLY, + .newval = "600", /* same as default, should fail anyway */ + .result = OP_EPERM, + }, + { + .descr = "sysctl_get_new_value sysctl:read EINVAL", + .insns = { + /* sysctl_get_new_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_new_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 8), + + /* sysctl_get_new_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_new_value), + + /* if (ret == expected) */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -EINVAL, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_get_new_value sysctl:write ok", + .insns = { + /* sysctl_get_new_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_new_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 4), + + /* sysctl_get_new_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_new_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 3, 4), + + /* buf[0:4] == "606\0") */ + BPF_LDX_MEM(BPF_W, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 0x00363036, 2), + + /* return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_A(1), + + /* else return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_WRONLY, + .newval = "606", + .result = OP_EPERM, + }, + { + .descr = "sysctl_get_new_value sysctl:write ok long", + .insns = { + /* sysctl_get_new_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -24), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_new_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 24), + + /* sysctl_get_new_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_new_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 23, 14), + + /* buf[0:8] == "3000000 " && */ + BPF_LD_IMM64(BPF_REG_8, 0x2030303030303033ULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 10), + + /* buf[8:16] == "4000000 " && */ + BPF_LD_IMM64(BPF_REG_8, 0x2030303030303034ULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 8), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 6), + + /* buf[16:24] == "6000000\0") */ + BPF_LD_IMM64(BPF_REG_8, 0x0030303030303036ULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 16), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_A(1), + + /* else return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_WRONLY, + .newval = "3000000 4000000 6000000", + .result = OP_EPERM, + }, + { + .descr = "sysctl_get_new_value sysctl:write E2BIG", + .insns = { + /* sysctl_get_new_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_B, BPF_REG_7, BPF_REG_0, 3), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_get_new_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 3), + + /* sysctl_get_new_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_get_new_value), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -E2BIG, 4), + + /* buf[0:3] == "60\0") */ + BPF_LDX_MEM(BPF_W, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 0x003036, 2), + + /* return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_A(1), + + /* else return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_WRONLY, + .newval = "606", + .result = OP_EPERM, + }, + { + .descr = "sysctl_set_new_value sysctl:read EINVAL", + .insns = { + /* sysctl_set_new_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_set_new_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 3), + + /* sysctl_set_new_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_set_new_value), + + /* if (ret == expected) */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -EINVAL, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + .descr = "sysctl_set_new_value sysctl:write ok", + .fixup_value_insn = 2, + .insns = { + /* sysctl_set_new_value arg2 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, FIXUP_SYSCTL_VALUE), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_7), + + /* sysctl_set_new_value arg3 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_3, 3), + + /* sysctl_set_new_value(ctx, buf, buf_len) */ + BPF_EMIT_CALL(BPF_FUNC_sysctl_set_new_value), + + /* if (ret == expected) */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_WRONLY, + .newval = "606", + .result = SUCCESS, + }, + { + "bpf_strtoul one number string", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 3, 4), + /* res == expected) */ + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 600, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtoul multi number string", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + /* "600 602\0" */ + BPF_LD_IMM64(BPF_REG_0, 0x0032303620303036ULL), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 8), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 3, 18), + /* res == expected) */ + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 600, 16), + + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_ALU64_REG(BPF_ADD, BPF_REG_7, BPF_REG_0), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 8), + BPF_ALU64_REG(BPF_SUB, BPF_REG_2, BPF_REG_0), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -16), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 4, 4), + /* res == expected) */ + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 602, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtoul buf_len = 0, reject", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 0), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = LOAD_REJECT, + }, + { + "bpf_strtoul supported base, ok", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00373730), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 8), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 3, 4), + /* res == expected) */ + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 63, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtoul unsupported base, EINVAL", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 3), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + /* if (ret == expected) */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -EINVAL, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtoul buf with spaces only, EINVAL", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x090a0c0d), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + /* if (ret == expected) */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -EINVAL, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtoul negative number, EINVAL", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00362d0a), /* " -6\0" */ + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + /* if (ret == expected) */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -EINVAL, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtol negative number, ok", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00362d0a), /* " -6\0" */ + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 10), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtol), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 3, 4), + /* res == expected) */ + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, -6, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtol hex number, ok", + .insns = { + /* arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x65667830), /* "0xfe" */ + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtol), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 4, 4), + /* res == expected) */ + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_IMM(BPF_JNE, BPF_REG_9, 254, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtol max long", + .insns = { + /* arg1 (buf) 9223372036854775807 */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -24), + BPF_LD_IMM64(BPF_REG_0, 0x3032373333323239ULL), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_LD_IMM64(BPF_REG_0, 0x3537373435383633ULL), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 8), + BPF_LD_IMM64(BPF_REG_0, 0x0000000000373038ULL), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 16), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 19), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtol), + + /* if (ret == expected && */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 19, 6), + /* res == expected) */ + BPF_LD_IMM64(BPF_REG_8, 0x7fffffffffffffffULL), + BPF_LDX_MEM(BPF_DW, BPF_REG_9, BPF_REG_7, 0), + BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_9, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "bpf_strtol overflow, ERANGE", + .insns = { + /* arg1 (buf) 9223372036854775808 */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -24), + BPF_LD_IMM64(BPF_REG_0, 0x3032373333323239ULL), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_LD_IMM64(BPF_REG_0, 0x3537373435383633ULL), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 8), + BPF_LD_IMM64(BPF_REG_0, 0x0000000000383038ULL), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 16), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 19), + + /* arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + BPF_EMIT_CALL(BPF_FUNC_strtol), + + /* if (ret == expected) */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, -ERANGE, 2), + + /* return ALLOW; */ + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_A(1), + + /* else return DENY; */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, + { + "C prog: deny all writes", + .prog_file = "./test_sysctl_prog.o", + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_WRONLY, + .newval = "123 456 789", + .result = OP_EPERM, + }, + { + "C prog: deny access by name", + .prog_file = "./test_sysctl_prog.o", + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/route/mtu_expires", + .open_flags = O_RDONLY, + .result = OP_EPERM, + }, + { + "C prog: read tcp_mem", + .prog_file = "./test_sysctl_prog.o", + .attach_type = BPF_CGROUP_SYSCTL, + .sysctl = "net/ipv4/tcp_mem", + .open_flags = O_RDONLY, + .result = SUCCESS, + }, +}; + +static size_t probe_prog_length(const struct bpf_insn *fp) +{ + size_t len; + + for (len = MAX_INSNS - 1; len > 0; --len) + if (fp[len].code != 0 || fp[len].imm != 0) + break; + return len + 1; +} + +static int fixup_sysctl_value(const char *buf, size_t buf_len, + struct bpf_insn *prog, size_t insn_num) +{ + uint32_t value_num = 0; + uint8_t c, i; + + if (buf_len > sizeof(value_num)) { + log_err("Value is too big (%zd) to use in fixup", buf_len); + return -1; + } + + for (i = 0; i < buf_len; ++i) { + c = buf[i]; + value_num |= (c << i * 8); + } + + prog[insn_num].imm = value_num; + + return 0; +} + +static int load_sysctl_prog_insns(struct sysctl_test *test, + const char *sysctl_path) +{ + struct bpf_insn *prog = test->insns; + struct bpf_load_program_attr attr; + int ret; + + memset(&attr, 0, sizeof(struct bpf_load_program_attr)); + attr.prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL; + attr.insns = prog; + attr.insns_cnt = probe_prog_length(attr.insns); + attr.license = "GPL"; + + if (test->fixup_value_insn) { + char buf[128]; + ssize_t len; + int fd; + + fd = open(sysctl_path, O_RDONLY | O_CLOEXEC); + if (fd < 0) { + log_err("open(%s) failed", sysctl_path); + return -1; + } + len = read(fd, buf, sizeof(buf)); + if (len == -1) { + log_err("read(%s) failed", sysctl_path); + close(fd); + return -1; + } + close(fd); + if (fixup_sysctl_value(buf, len, prog, test->fixup_value_insn)) + return -1; + } + + ret = bpf_load_program_xattr(&attr, bpf_log_buf, BPF_LOG_BUF_SIZE); + if (ret < 0 && test->result != LOAD_REJECT) { + log_err(">>> Loading program error.\n" + ">>> Verifier output:\n%s\n-------\n", bpf_log_buf); + } + + return ret; +} + +static int load_sysctl_prog_file(struct sysctl_test *test) +{ + struct bpf_prog_load_attr attr; + struct bpf_object *obj; + int prog_fd; + + memset(&attr, 0, sizeof(struct bpf_prog_load_attr)); + attr.file = test->prog_file; + attr.prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL; + + if (bpf_prog_load_xattr(&attr, &obj, &prog_fd)) { + if (test->result != LOAD_REJECT) + log_err(">>> Loading program (%s) error.\n", + test->prog_file); + return -1; + } + + return prog_fd; +} + +static int load_sysctl_prog(struct sysctl_test *test, const char *sysctl_path) +{ + return test->prog_file + ? load_sysctl_prog_file(test) + : load_sysctl_prog_insns(test, sysctl_path); +} + +static int access_sysctl(const char *sysctl_path, + const struct sysctl_test *test) +{ + int err = 0; + int fd; + + fd = open(sysctl_path, test->open_flags | O_CLOEXEC); + if (fd < 0) + return fd; + + if (test->open_flags == O_RDONLY) { + char buf[128]; + + if (read(fd, buf, sizeof(buf)) == -1) + goto err; + if (test->oldval && + strncmp(buf, test->oldval, strlen(test->oldval))) { + log_err("Read value %s != %s", buf, test->oldval); + goto err; + } + } else if (test->open_flags == O_WRONLY) { + if (!test->newval) { + log_err("New value for sysctl is not set"); + goto err; + } + if (write(fd, test->newval, strlen(test->newval)) == -1) + goto err; + } else { + log_err("Unexpected sysctl access: neither read nor write"); + goto err; + } + + goto out; +err: + err = -1; +out: + close(fd); + return err; +} + +static int run_test_case(int cgfd, struct sysctl_test *test) +{ + enum bpf_attach_type atype = test->attach_type; + char sysctl_path[128]; + int progfd = -1; + int err = 0; + + printf("Test case: %s .. ", test->descr); + + snprintf(sysctl_path, sizeof(sysctl_path), "/proc/sys/%s", + test->sysctl); + + progfd = load_sysctl_prog(test, sysctl_path); + if (progfd < 0) { + if (test->result == LOAD_REJECT) + goto out; + else + goto err; + } + + if (bpf_prog_attach(progfd, cgfd, atype, BPF_F_ALLOW_OVERRIDE) == -1) { + if (test->result == ATTACH_REJECT) + goto out; + else + goto err; + } + + if (access_sysctl(sysctl_path, test) == -1) { + if (test->result == OP_EPERM && errno == EPERM) + goto out; + else + goto err; + } + + if (test->result != SUCCESS) { + log_err("Unexpected failure"); + goto err; + } + + goto out; +err: + err = -1; +out: + /* Detaching w/o checking return code: best effort attempt. */ + if (progfd != -1) + bpf_prog_detach(cgfd, atype); + close(progfd); + printf("[%s]\n", err ? "FAIL" : "PASS"); + return err; +} + +static int run_tests(int cgfd) +{ + int passes = 0; + int fails = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(tests); ++i) { + if (run_test_case(cgfd, &tests[i])) + ++fails; + else + ++passes; + } + printf("Summary: %d PASSED, %d FAILED\n", passes, fails); + return fails ? -1 : 0; +} + +int main(int argc, char **argv) +{ + int cgfd = -1; + int err = 0; + + if (setup_cgroup_environment()) + goto err; + + cgfd = create_and_get_cgroup(CG_PATH); + if (cgfd < 0) + goto err; + + if (join_cgroup(CG_PATH)) + goto err; + + if (run_tests(cgfd)) + goto err; + + goto out; +err: + err = -1; +out: + close(cgfd); + cleanup_cgroup_environment(); + return err; +} diff --git a/tools/testing/selftests/bpf/test_tc_edt.sh b/tools/testing/selftests/bpf/test_tc_edt.sh new file mode 100755 index 000000000000..f38567ef694b --- /dev/null +++ b/tools/testing/selftests/bpf/test_tc_edt.sh @@ -0,0 +1,99 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test installs a TC bpf program that throttles a TCP flow +# with dst port = 9000 down to 5MBps. Then it measures actual +# throughput of the flow. + +if [[ $EUID -ne 0 ]]; then + echo "This script must be run as root" + echo "FAIL" + exit 1 +fi + +# check that nc, dd, and timeout are present +command -v nc >/dev/null 2>&1 || \ + { echo >&2 "nc is not available"; exit 1; } +command -v dd >/dev/null 2>&1 || \ + { echo >&2 "nc is not available"; exit 1; } +command -v timeout >/dev/null 2>&1 || \ + { echo >&2 "timeout is not available"; exit 1; } + +readonly NS_SRC="ns-src-$(mktemp -u XXXXXX)" +readonly NS_DST="ns-dst-$(mktemp -u XXXXXX)" + +readonly IP_SRC="172.16.1.100" +readonly IP_DST="172.16.2.100" + +cleanup() +{ + ip netns del ${NS_SRC} + ip netns del ${NS_DST} +} + +trap cleanup EXIT + +set -e # exit on error + +ip netns add "${NS_SRC}" +ip netns add "${NS_DST}" +ip link add veth_src type veth peer name veth_dst +ip link set veth_src netns ${NS_SRC} +ip link set veth_dst netns ${NS_DST} + +ip -netns ${NS_SRC} addr add ${IP_SRC}/24 dev veth_src +ip -netns ${NS_DST} addr add ${IP_DST}/24 dev veth_dst + +ip -netns ${NS_SRC} link set dev veth_src up +ip -netns ${NS_DST} link set dev veth_dst up + +ip -netns ${NS_SRC} route add ${IP_DST}/32 dev veth_src +ip -netns ${NS_DST} route add ${IP_SRC}/32 dev veth_dst + +# set up TC on TX +ip netns exec ${NS_SRC} tc qdisc add dev veth_src root fq +ip netns exec ${NS_SRC} tc qdisc add dev veth_src clsact +ip netns exec ${NS_SRC} tc filter add dev veth_src egress \ + bpf da obj test_tc_edt.o sec cls_test + + +# start the listener +ip netns exec ${NS_DST} bash -c \ + "nc -4 -l -s ${IP_DST} -p 9000 >/dev/null &" +declare -i NC_PID=$! +sleep 1 + +declare -ir TIMEOUT=20 +declare -ir EXPECTED_BPS=5000000 + +# run the load, capture RX bytes on DST +declare -ir RX_BYTES_START=$( ip netns exec ${NS_DST} \ + cat /sys/class/net/veth_dst/statistics/rx_bytes ) + +set +e +ip netns exec ${NS_SRC} bash -c "timeout ${TIMEOUT} dd if=/dev/zero \ + bs=1000 count=1000000 > /dev/tcp/${IP_DST}/9000 2>/dev/null" +set -e + +declare -ir RX_BYTES_END=$( ip netns exec ${NS_DST} \ + cat /sys/class/net/veth_dst/statistics/rx_bytes ) + +declare -ir ACTUAL_BPS=$(( ($RX_BYTES_END - $RX_BYTES_START) / $TIMEOUT )) + +echo $TIMEOUT $ACTUAL_BPS $EXPECTED_BPS | \ + awk '{printf "elapsed: %d sec; bps difference: %.2f%%\n", + $1, ($2-$3)*100.0/$3}' + +# Pass the test if the actual bps is within 1% of the expected bps. +# The difference is usually about 0.1% on a 20-sec test, and ==> zero +# the longer the test runs. +declare -ir RES=$( echo $ACTUAL_BPS $EXPECTED_BPS | \ + awk 'function abs(x){return ((x < 0.0) ? -x : x)} + {if (abs(($1-$2)*100.0/$2) > 1.0) { print "1" } + else { print "0"} }' ) +if [ "${RES}" == "0" ] ; then + echo "PASS" +else + echo "FAIL" + exit 1 +fi diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh new file mode 100755 index 000000000000..ff0d31d38061 --- /dev/null +++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh @@ -0,0 +1,290 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# In-place tunneling + +# must match the port that the bpf program filters on +readonly port=8000 + +readonly ns_prefix="ns-$$-" +readonly ns1="${ns_prefix}1" +readonly ns2="${ns_prefix}2" + +readonly ns1_v4=192.168.1.1 +readonly ns2_v4=192.168.1.2 +readonly ns1_v6=fd::1 +readonly ns2_v6=fd::2 + +# Must match port used by bpf program +readonly udpport=5555 +# MPLSoverUDP +readonly mplsudpport=6635 +readonly mplsproto=137 + +readonly infile="$(mktemp)" +readonly outfile="$(mktemp)" + +setup() { + ip netns add "${ns1}" + ip netns add "${ns2}" + + ip link add dev veth1 mtu 1500 netns "${ns1}" type veth \ + peer name veth2 mtu 1500 netns "${ns2}" + + ip netns exec "${ns1}" ethtool -K veth1 tso off + + ip -netns "${ns1}" link set veth1 up + ip -netns "${ns2}" link set veth2 up + + ip -netns "${ns1}" -4 addr add "${ns1_v4}/24" dev veth1 + ip -netns "${ns2}" -4 addr add "${ns2_v4}/24" dev veth2 + ip -netns "${ns1}" -6 addr add "${ns1_v6}/64" dev veth1 nodad + ip -netns "${ns2}" -6 addr add "${ns2_v6}/64" dev veth2 nodad + + # clamp route to reserve room for tunnel headers + ip -netns "${ns1}" -4 route flush table main + ip -netns "${ns1}" -6 route flush table main + ip -netns "${ns1}" -4 route add "${ns2_v4}" mtu 1458 dev veth1 + ip -netns "${ns1}" -6 route add "${ns2_v6}" mtu 1438 dev veth1 + + sleep 1 + + dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none +} + +cleanup() { + ip netns del "${ns2}" + ip netns del "${ns1}" + + if [[ -f "${outfile}" ]]; then + rm "${outfile}" + fi + if [[ -f "${infile}" ]]; then + rm "${infile}" + fi +} + +server_listen() { + ip netns exec "${ns2}" nc "${netcat_opt}" -l -p "${port}" > "${outfile}" & + server_pid=$! + sleep 0.2 +} + +client_connect() { + ip netns exec "${ns1}" timeout 2 nc "${netcat_opt}" -w 1 "${addr2}" "${port}" < "${infile}" + echo $? +} + +verify_data() { + wait "${server_pid}" + # sha1sum returns two fields [sha1] [filepath] + # convert to bash array and access first elem + insum=($(sha1sum ${infile})) + outsum=($(sha1sum ${outfile})) + if [[ "${insum[0]}" != "${outsum[0]}" ]]; then + echo "data mismatch" + exit 1 + fi +} + +set -e + +# no arguments: automated test, run all +if [[ "$#" -eq "0" ]]; then + echo "ipip" + $0 ipv4 ipip none 100 + + echo "ip6ip6" + $0 ipv6 ip6tnl none 100 + + echo "sit" + $0 ipv6 sit none 100 + + for mac in none mpls eth ; do + echo "ip gre $mac" + $0 ipv4 gre $mac 100 + + echo "ip6 gre $mac" + $0 ipv6 ip6gre $mac 100 + + echo "ip gre $mac gso" + $0 ipv4 gre $mac 2000 + + echo "ip6 gre $mac gso" + $0 ipv6 ip6gre $mac 2000 + + echo "ip udp $mac" + $0 ipv4 udp $mac 100 + + echo "ip6 udp $mac" + $0 ipv6 ip6udp $mac 100 + + echo "ip udp $mac gso" + $0 ipv4 udp $mac 2000 + + echo "ip6 udp $mac gso" + $0 ipv6 ip6udp $mac 2000 + done + + echo "OK. All tests passed" + exit 0 +fi + +if [[ "$#" -ne "4" ]]; then + echo "Usage: $0" + echo " or: $0 <ipv4|ipv6> <tuntype> <none|mpls|eth> <data_len>" + exit 1 +fi + +case "$1" in +"ipv4") + readonly addr1="${ns1_v4}" + readonly addr2="${ns2_v4}" + readonly ipproto=4 + readonly netcat_opt=-${ipproto} + readonly foumod=fou + readonly foutype=ipip + readonly fouproto=4 + readonly fouproto_mpls=${mplsproto} + readonly gretaptype=gretap + ;; +"ipv6") + readonly addr1="${ns1_v6}" + readonly addr2="${ns2_v6}" + readonly ipproto=6 + readonly netcat_opt=-${ipproto} + readonly foumod=fou6 + readonly foutype=ip6tnl + readonly fouproto="41 -6" + readonly fouproto_mpls="${mplsproto} -6" + readonly gretaptype=ip6gretap + ;; +*) + echo "unknown arg: $1" + exit 1 + ;; +esac + +readonly tuntype=$2 +readonly mac=$3 +readonly datalen=$4 + +echo "encap ${addr1} to ${addr2}, type ${tuntype}, mac ${mac} len ${datalen}" + +trap cleanup EXIT + +setup + +# basic communication works +echo "test basic connectivity" +server_listen +client_connect +verify_data + +# clientside, insert bpf program to encap all TCP to port ${port} +# client can no longer connect +ip netns exec "${ns1}" tc qdisc add dev veth1 clsact +ip netns exec "${ns1}" tc filter add dev veth1 egress \ + bpf direct-action object-file ./test_tc_tunnel.o \ + section "encap_${tuntype}_${mac}" +echo "test bpf encap without decap (expect failure)" +server_listen +! client_connect + +if [[ "$tuntype" =~ "udp" ]]; then + # Set up fou tunnel. + ttype="${foutype}" + targs="encap fou encap-sport auto encap-dport $udpport" + # fou may be a module; allow this to fail. + modprobe "${foumod}" ||true + if [[ "$mac" == "mpls" ]]; then + dport=${mplsudpport} + dproto=${fouproto_mpls} + tmode="mode any ttl 255" + else + dport=${udpport} + dproto=${fouproto} + fi + ip netns exec "${ns2}" ip fou add port $dport ipproto ${dproto} + targs="encap fou encap-sport auto encap-dport $dport" +elif [[ "$tuntype" =~ "gre" && "$mac" == "eth" ]]; then + ttype=$gretaptype +else + ttype=$tuntype + targs="" +fi + +# tunnel address family differs from inner for SIT +if [[ "${tuntype}" == "sit" ]]; then + link_addr1="${ns1_v4}" + link_addr2="${ns2_v4}" +else + link_addr1="${addr1}" + link_addr2="${addr2}" +fi + +# serverside, insert decap module +# server is still running +# client can connect again +ip netns exec "${ns2}" ip link add name testtun0 type "${ttype}" \ + ${tmode} remote "${link_addr1}" local "${link_addr2}" $targs + +expect_tun_fail=0 + +if [[ "$tuntype" == "ip6udp" && "$mac" == "mpls" ]]; then + # No support for MPLS IPv6 fou tunnel; expect failure. + expect_tun_fail=1 +elif [[ "$tuntype" =~ "udp" && "$mac" == "eth" ]]; then + # No support for TEB fou tunnel; expect failure. + expect_tun_fail=1 +elif [[ "$tuntype" =~ "gre" && "$mac" == "eth" ]]; then + # Share ethernet address between tunnel/veth2 so L2 decap works. + ethaddr=$(ip netns exec "${ns2}" ip link show veth2 | \ + awk '/ether/ { print $2 }') + ip netns exec "${ns2}" ip link set testtun0 address $ethaddr +elif [[ "$mac" == "mpls" ]]; then + modprobe mpls_iptunnel ||true + modprobe mpls_gso ||true + ip netns exec "${ns2}" sysctl -qw net.mpls.platform_labels=65536 + ip netns exec "${ns2}" ip -f mpls route add 1000 dev lo + ip netns exec "${ns2}" ip link set lo up + ip netns exec "${ns2}" sysctl -qw net.mpls.conf.testtun0.input=1 + ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.lo.rp_filter=0 +fi + +# Because packets are decapped by the tunnel they arrive on testtun0 from +# the IP stack perspective. Ensure reverse path filtering is disabled +# otherwise we drop the TCP SYN as arriving on testtun0 instead of the +# expected veth2 (veth2 is where 192.168.1.2 is configured). +ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.rp_filter=0 +# rp needs to be disabled for both all and testtun0 as the rp value is +# selected as the max of the "all" and device-specific values. +ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.testtun0.rp_filter=0 +ip netns exec "${ns2}" ip link set dev testtun0 up +if [[ "$expect_tun_fail" == 1 ]]; then + # This tunnel mode is not supported, so we expect failure. + echo "test bpf encap with tunnel device decap (expect failure)" + ! client_connect +else + echo "test bpf encap with tunnel device decap" + client_connect + verify_data + server_listen +fi + +# bpf_skb_net_shrink does not take tunnel flags yet, cannot update L3. +if [[ "${tuntype}" == "sit" ]]; then + echo OK + exit 0 +fi + +# serverside, use BPF for decap +ip netns exec "${ns2}" ip link del dev testtun0 +ip netns exec "${ns2}" tc qdisc add dev veth2 clsact +ip netns exec "${ns2}" tc filter add dev veth2 ingress \ + bpf direct-action object-file ./test_tc_tunnel.o section decap +echo "test bpf encap with bpf decap" +client_connect +verify_data + +echo OK diff --git a/tools/testing/selftests/bpf/test_tcp_check_syncookie.sh b/tools/testing/selftests/bpf/test_tcp_check_syncookie.sh new file mode 100755 index 000000000000..d48e51716d19 --- /dev/null +++ b/tools/testing/selftests/bpf/test_tcp_check_syncookie.sh @@ -0,0 +1,81 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2018 Facebook +# Copyright (c) 2019 Cloudflare + +set -eu + +wait_for_ip() +{ + local _i + printf "Wait for IP %s to become available " "$1" + for _i in $(seq ${MAX_PING_TRIES}); do + printf "." + if ns1_exec ping -c 1 -W 1 "$1" >/dev/null 2>&1; then + echo " OK" + return + fi + sleep 1 + done + echo 1>&2 "ERROR: Timeout waiting for test IP to become available." + exit 1 +} + +get_prog_id() +{ + awk '/ id / {sub(/.* id /, "", $0); print($1)}' +} + +ns1_exec() +{ + ip netns exec ns1 "$@" +} + +setup() +{ + ip netns add ns1 + ns1_exec ip link set lo up + + ns1_exec sysctl -w net.ipv4.tcp_syncookies=2 + + wait_for_ip 127.0.0.1 + wait_for_ip ::1 +} + +cleanup() +{ + ip netns del ns1 2>/dev/null || : +} + +main() +{ + trap cleanup EXIT 2 3 6 15 + setup + + printf "Testing clsact..." + ns1_exec tc qdisc add dev "${TEST_IF}" clsact + ns1_exec tc filter add dev "${TEST_IF}" ingress \ + bpf obj "${BPF_PROG_OBJ}" sec "${CLSACT_SECTION}" da + + BPF_PROG_ID=$(ns1_exec tc filter show dev "${TEST_IF}" ingress | \ + get_prog_id) + ns1_exec "${PROG}" "${BPF_PROG_ID}" + ns1_exec tc qdisc del dev "${TEST_IF}" clsact + + printf "Testing XDP..." + ns1_exec ip link set "${TEST_IF}" xdp \ + object "${BPF_PROG_OBJ}" section "${XDP_SECTION}" + BPF_PROG_ID=$(ns1_exec ip link show "${TEST_IF}" | get_prog_id) + ns1_exec "${PROG}" "${BPF_PROG_ID}" +} + +DIR=$(dirname $0) +TEST_IF=lo +MAX_PING_TRIES=5 +BPF_PROG_OBJ="${DIR}/test_tcp_check_syncookie_kern.o" +CLSACT_SECTION="clsact/check_syncookie" +XDP_SECTION="xdp/check_syncookie" +BPF_PROG_ID=0 +PROG="${DIR}/test_tcp_check_syncookie_user" + +main diff --git a/tools/testing/selftests/bpf/test_tcp_check_syncookie_user.c b/tools/testing/selftests/bpf/test_tcp_check_syncookie_user.c new file mode 100644 index 000000000000..87829c86c746 --- /dev/null +++ b/tools/testing/selftests/bpf/test_tcp_check_syncookie_user.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Facebook +// Copyright (c) 2019 Cloudflare + +#include <string.h> +#include <stdlib.h> +#include <unistd.h> + +#include <arpa/inet.h> +#include <netinet/in.h> +#include <sys/types.h> +#include <sys/socket.h> + +#include <bpf/bpf.h> +#include <bpf/libbpf.h> + +#include "bpf_rlimit.h" +#include "cgroup_helpers.h" + +static int start_server(const struct sockaddr *addr, socklen_t len) +{ + int fd; + + fd = socket(addr->sa_family, SOCK_STREAM, 0); + if (fd == -1) { + log_err("Failed to create server socket"); + goto out; + } + + if (bind(fd, addr, len) == -1) { + log_err("Failed to bind server socket"); + goto close_out; + } + + if (listen(fd, 128) == -1) { + log_err("Failed to listen on server socket"); + goto close_out; + } + + goto out; + +close_out: + close(fd); + fd = -1; +out: + return fd; +} + +static int connect_to_server(int server_fd) +{ + struct sockaddr_storage addr; + socklen_t len = sizeof(addr); + int fd = -1; + + if (getsockname(server_fd, (struct sockaddr *)&addr, &len)) { + log_err("Failed to get server addr"); + goto out; + } + + fd = socket(addr.ss_family, SOCK_STREAM, 0); + if (fd == -1) { + log_err("Failed to create client socket"); + goto out; + } + + if (connect(fd, (const struct sockaddr *)&addr, len) == -1) { + log_err("Fail to connect to server"); + goto close_out; + } + + goto out; + +close_out: + close(fd); + fd = -1; +out: + return fd; +} + +static int get_map_fd_by_prog_id(int prog_id) +{ + struct bpf_prog_info info = {}; + __u32 info_len = sizeof(info); + __u32 map_ids[1]; + int prog_fd = -1; + int map_fd = -1; + + prog_fd = bpf_prog_get_fd_by_id(prog_id); + if (prog_fd < 0) { + log_err("Failed to get fd by prog id %d", prog_id); + goto err; + } + + info.nr_map_ids = 1; + info.map_ids = (__u64)(unsigned long)map_ids; + + if (bpf_obj_get_info_by_fd(prog_fd, &info, &info_len)) { + log_err("Failed to get info by prog fd %d", prog_fd); + goto err; + } + + if (!info.nr_map_ids) { + log_err("No maps found for prog fd %d", prog_fd); + goto err; + } + + map_fd = bpf_map_get_fd_by_id(map_ids[0]); + if (map_fd < 0) + log_err("Failed to get fd by map id %d", map_ids[0]); +err: + if (prog_fd >= 0) + close(prog_fd); + return map_fd; +} + +static int run_test(int server_fd, int results_fd) +{ + int client = -1, srv_client = -1; + int ret = 0; + __u32 key = 0; + __u64 value = 0; + + if (bpf_map_update_elem(results_fd, &key, &value, 0) < 0) { + log_err("Can't clear results"); + goto err; + } + + client = connect_to_server(server_fd); + if (client == -1) + goto err; + + srv_client = accept(server_fd, NULL, 0); + if (srv_client == -1) { + log_err("Can't accept connection"); + goto err; + } + + if (bpf_map_lookup_elem(results_fd, &key, &value) < 0) { + log_err("Can't lookup result"); + goto err; + } + + if (value != 1) { + log_err("Didn't match syncookie: %llu", value); + goto err; + } + + goto out; + +err: + ret = 1; +out: + close(client); + close(srv_client); + return ret; +} + +int main(int argc, char **argv) +{ + struct sockaddr_in addr4; + struct sockaddr_in6 addr6; + int server = -1; + int server_v6 = -1; + int results = -1; + int err = 0; + + if (argc < 2) { + fprintf(stderr, "Usage: %s prog_id\n", argv[0]); + exit(1); + } + + results = get_map_fd_by_prog_id(atoi(argv[1])); + if (results < 0) { + log_err("Can't get map"); + goto err; + } + + memset(&addr4, 0, sizeof(addr4)); + addr4.sin_family = AF_INET; + addr4.sin_addr.s_addr = htonl(INADDR_LOOPBACK); + addr4.sin_port = 0; + + memset(&addr6, 0, sizeof(addr6)); + addr6.sin6_family = AF_INET6; + addr6.sin6_addr = in6addr_loopback; + addr6.sin6_port = 0; + + server = start_server((const struct sockaddr *)&addr4, sizeof(addr4)); + if (server == -1) + goto err; + + server_v6 = start_server((const struct sockaddr *)&addr6, + sizeof(addr6)); + if (server_v6 == -1) + goto err; + + if (run_test(server, results)) + goto err; + + if (run_test(server_v6, results)) + goto err; + + printf("ok\n"); + goto out; +err: + err = 1; +out: + close(server); + close(server_v6); + close(results); + return err; +} diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c index 477a9dcf9fff..ccd896b98cac 100644 --- a/tools/testing/selftests/bpf/test_verifier.c +++ b/tools/testing/selftests/bpf/test_verifier.c @@ -47,11 +47,13 @@ #include "bpf_rlimit.h" #include "bpf_rand.h" #include "bpf_util.h" +#include "test_btf.h" #include "../../../include/linux/filter.h" #define MAX_INSNS BPF_MAXINSNS +#define MAX_TEST_INSNS 1000000 #define MAX_FIXUPS 8 -#define MAX_NR_MAPS 14 +#define MAX_NR_MAPS 18 #define MAX_TEST_RUNS 8 #define POINTER_VALUE 0xcafe4all #define TEST_DATA_LEN 64 @@ -66,6 +68,7 @@ static int skips; struct bpf_test { const char *descr; struct bpf_insn insns[MAX_INSNS]; + struct bpf_insn *fill_insns; int fixup_map_hash_8b[MAX_FIXUPS]; int fixup_map_hash_48b[MAX_FIXUPS]; int fixup_map_hash_16b[MAX_FIXUPS]; @@ -80,9 +83,14 @@ struct bpf_test { int fixup_cgroup_storage[MAX_FIXUPS]; int fixup_percpu_cgroup_storage[MAX_FIXUPS]; int fixup_map_spin_lock[MAX_FIXUPS]; + int fixup_map_array_ro[MAX_FIXUPS]; + int fixup_map_array_wo[MAX_FIXUPS]; + int fixup_map_array_small[MAX_FIXUPS]; + int fixup_sk_storage_map[MAX_FIXUPS]; const char *errstr; const char *errstr_unpriv; uint32_t retval, retval_unpriv, insn_processed; + int prog_len; enum { UNDEF, ACCEPT, @@ -119,10 +127,11 @@ struct other_val { static void bpf_fill_ld_abs_vlan_push_pop(struct bpf_test *self) { - /* test: {skb->data[0], vlan_push} x 68 + {skb->data[0], vlan_pop} x 68 */ + /* test: {skb->data[0], vlan_push} x 51 + {skb->data[0], vlan_pop} x 51 */ #define PUSH_CNT 51 - unsigned int len = BPF_MAXINSNS; - struct bpf_insn *insn = self->insns; + /* jump range is limited to 16 bit. PUSH_CNT of ld_abs needs room */ + unsigned int len = (1 << 15) - PUSH_CNT * 2 * 5 * 6; + struct bpf_insn *insn = self->fill_insns; int i = 0, j, k = 0; insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1); @@ -156,12 +165,14 @@ loop: for (; i < len - 1; i++) insn[i] = BPF_ALU32_IMM(BPF_MOV, BPF_REG_0, 0xbef); insn[len - 1] = BPF_EXIT_INSN(); + self->prog_len = len; } static void bpf_fill_jump_around_ld_abs(struct bpf_test *self) { - struct bpf_insn *insn = self->insns; - unsigned int len = BPF_MAXINSNS; + struct bpf_insn *insn = self->fill_insns; + /* jump range is limited to 16 bit. every ld_abs is replaced by 6 insns */ + unsigned int len = (1 << 15) / 6; int i = 0; insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1); @@ -171,11 +182,12 @@ static void bpf_fill_jump_around_ld_abs(struct bpf_test *self) while (i < len - 1) insn[i++] = BPF_LD_ABS(BPF_B, 1); insn[i] = BPF_EXIT_INSN(); + self->prog_len = i + 1; } static void bpf_fill_rand_ld_dw(struct bpf_test *self) { - struct bpf_insn *insn = self->insns; + struct bpf_insn *insn = self->fill_insns; uint64_t res = 0; int i = 0; @@ -193,12 +205,83 @@ static void bpf_fill_rand_ld_dw(struct bpf_test *self) insn[i++] = BPF_ALU64_IMM(BPF_RSH, BPF_REG_1, 32); insn[i++] = BPF_ALU64_REG(BPF_XOR, BPF_REG_0, BPF_REG_1); insn[i] = BPF_EXIT_INSN(); + self->prog_len = i + 1; res ^= (res >> 32); self->retval = (uint32_t)res; } +/* test the sequence of 1k jumps */ +static void bpf_fill_scale1(struct bpf_test *self) +{ + struct bpf_insn *insn = self->fill_insns; + int i = 0, k = 0; + + insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1); + /* test to check that the sequence of 1024 jumps is acceptable */ + while (k++ < 1024) { + insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_get_prandom_u32); + insn[i++] = BPF_JMP_IMM(BPF_JGT, BPF_REG_0, bpf_semi_rand_get(), 2); + insn[i++] = BPF_MOV64_REG(BPF_REG_1, BPF_REG_10); + insn[i++] = BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_6, + -8 * (k % 64 + 1)); + } + /* every jump adds 1024 steps to insn_processed, so to stay exactly + * within 1m limit add MAX_TEST_INSNS - 1025 MOVs and 1 EXIT + */ + while (i < MAX_TEST_INSNS - 1025) + insn[i++] = BPF_ALU32_IMM(BPF_MOV, BPF_REG_0, 42); + insn[i] = BPF_EXIT_INSN(); + self->prog_len = i + 1; + self->retval = 42; +} + +/* test the sequence of 1k jumps in inner most function (function depth 8)*/ +static void bpf_fill_scale2(struct bpf_test *self) +{ + struct bpf_insn *insn = self->fill_insns; + int i = 0, k = 0; + +#define FUNC_NEST 7 + for (k = 0; k < FUNC_NEST; k++) { + insn[i++] = BPF_CALL_REL(1); + insn[i++] = BPF_EXIT_INSN(); + } + insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1); + /* test to check that the sequence of 1024 jumps is acceptable */ + while (k++ < 1024) { + insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_get_prandom_u32); + insn[i++] = BPF_JMP_IMM(BPF_JGT, BPF_REG_0, bpf_semi_rand_get(), 2); + insn[i++] = BPF_MOV64_REG(BPF_REG_1, BPF_REG_10); + insn[i++] = BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_6, + -8 * (k % (64 - 4 * FUNC_NEST) + 1)); + } + /* every jump adds 1024 steps to insn_processed, so to stay exactly + * within 1m limit add MAX_TEST_INSNS - 1025 MOVs and 1 EXIT + */ + while (i < MAX_TEST_INSNS - 1025) + insn[i++] = BPF_ALU32_IMM(BPF_MOV, BPF_REG_0, 42); + insn[i] = BPF_EXIT_INSN(); + self->prog_len = i + 1; + self->retval = 42; +} + +static void bpf_fill_scale(struct bpf_test *self) +{ + switch (self->retval) { + case 1: + return bpf_fill_scale1(self); + case 2: + return bpf_fill_scale2(self); + default: + self->prog_len = 0; + break; + } +} + /* BPF_SK_LOOKUP contains 13 instructions, if you need to fix up maps */ -#define BPF_SK_LOOKUP \ +#define BPF_SK_LOOKUP(func) \ /* struct bpf_sock_tuple tuple = {} */ \ BPF_MOV64_IMM(BPF_REG_2, 0), \ BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8), \ @@ -207,13 +290,13 @@ static void bpf_fill_rand_ld_dw(struct bpf_test *self) BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_2, -32), \ BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_2, -40), \ BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_2, -48), \ - /* sk = sk_lookup_tcp(ctx, &tuple, sizeof tuple, 0, 0) */ \ + /* sk = func(ctx, &tuple, sizeof tuple, 0, 0) */ \ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), \ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -48), \ BPF_MOV64_IMM(BPF_REG_3, sizeof(struct bpf_sock_tuple)), \ BPF_MOV64_IMM(BPF_REG_4, 0), \ BPF_MOV64_IMM(BPF_REG_5, 0), \ - BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp) + BPF_EMIT_CALL(BPF_FUNC_ ## func) /* BPF_DIRECT_PKT_R2 contains 7 instructions, it initializes default return * value into 0 and does necessary preparation for direct packet access @@ -277,13 +360,15 @@ static bool skip_unsupported_map(enum bpf_map_type map_type) return false; } -static int create_map(uint32_t type, uint32_t size_key, - uint32_t size_value, uint32_t max_elem) +static int __create_map(uint32_t type, uint32_t size_key, + uint32_t size_value, uint32_t max_elem, + uint32_t extra_flags) { int fd; fd = bpf_create_map(type, size_key, size_value, max_elem, - type == BPF_MAP_TYPE_HASH ? BPF_F_NO_PREALLOC : 0); + (type == BPF_MAP_TYPE_HASH ? + BPF_F_NO_PREALLOC : 0) | extra_flags); if (fd < 0) { if (skip_unsupported_map(type)) return -1; @@ -293,6 +378,12 @@ static int create_map(uint32_t type, uint32_t size_key, return fd; } +static int create_map(uint32_t type, uint32_t size_key, + uint32_t size_value, uint32_t max_elem) +{ + return __create_map(type, size_key, size_value, max_elem, 0); +} + static void update_map(int fd, int index) { struct test_val value = { @@ -408,24 +499,6 @@ static int create_cgroup_storage(bool percpu) return fd; } -#define BTF_INFO_ENC(kind, kind_flag, vlen) \ - ((!!(kind_flag) << 31) | ((kind) << 24) | ((vlen) & BTF_MAX_VLEN)) -#define BTF_TYPE_ENC(name, info, size_or_type) \ - (name), (info), (size_or_type) -#define BTF_INT_ENC(encoding, bits_offset, nr_bits) \ - ((encoding) << 24 | (bits_offset) << 16 | (nr_bits)) -#define BTF_TYPE_INT_ENC(name, encoding, bits_offset, bits, sz) \ - BTF_TYPE_ENC(name, BTF_INFO_ENC(BTF_KIND_INT, 0, 0), sz), \ - BTF_INT_ENC(encoding, bits_offset, bits) -#define BTF_MEMBER_ENC(name, type, bits_offset) \ - (name), (type), (bits_offset) - -struct btf_raw_data { - __u32 raw_types[64]; - const char *str_sec; - __u32 str_sec_size; -}; - /* struct bpf_spin_lock { * int val; * }; @@ -500,6 +573,31 @@ static int create_map_spin_lock(void) return fd; } +static int create_sk_storage_map(void) +{ + struct bpf_create_map_attr attr = { + .name = "test_map", + .map_type = BPF_MAP_TYPE_SK_STORAGE, + .key_size = 4, + .value_size = 8, + .max_entries = 0, + .map_flags = BPF_F_NO_PREALLOC, + .btf_key_type_id = 1, + .btf_value_type_id = 3, + }; + int fd, btf_fd; + + btf_fd = load_btf(); + if (btf_fd < 0) + return -1; + attr.btf_fd = btf_fd; + fd = bpf_create_map_xattr(&attr); + close(attr.btf_fd); + if (fd < 0) + printf("Failed to create sk_storage_map\n"); + return fd; +} + static char bpf_vlog[UINT_MAX >> 8]; static void do_test_fixup(struct bpf_test *test, enum bpf_prog_type prog_type, @@ -519,9 +617,15 @@ static void do_test_fixup(struct bpf_test *test, enum bpf_prog_type prog_type, int *fixup_cgroup_storage = test->fixup_cgroup_storage; int *fixup_percpu_cgroup_storage = test->fixup_percpu_cgroup_storage; int *fixup_map_spin_lock = test->fixup_map_spin_lock; + int *fixup_map_array_ro = test->fixup_map_array_ro; + int *fixup_map_array_wo = test->fixup_map_array_wo; + int *fixup_map_array_small = test->fixup_map_array_small; + int *fixup_sk_storage_map = test->fixup_sk_storage_map; - if (test->fill_helper) + if (test->fill_helper) { + test->fill_insns = calloc(MAX_TEST_INSNS, sizeof(struct bpf_insn)); test->fill_helper(test); + } /* Allocating HTs with 1 elem is fine here, since we only test * for verifier and not do a runtime lookup, so the only thing @@ -642,6 +746,42 @@ static void do_test_fixup(struct bpf_test *test, enum bpf_prog_type prog_type, fixup_map_spin_lock++; } while (*fixup_map_spin_lock); } + if (*fixup_map_array_ro) { + map_fds[14] = __create_map(BPF_MAP_TYPE_ARRAY, sizeof(int), + sizeof(struct test_val), 1, + BPF_F_RDONLY_PROG); + update_map(map_fds[14], 0); + do { + prog[*fixup_map_array_ro].imm = map_fds[14]; + fixup_map_array_ro++; + } while (*fixup_map_array_ro); + } + if (*fixup_map_array_wo) { + map_fds[15] = __create_map(BPF_MAP_TYPE_ARRAY, sizeof(int), + sizeof(struct test_val), 1, + BPF_F_WRONLY_PROG); + update_map(map_fds[15], 0); + do { + prog[*fixup_map_array_wo].imm = map_fds[15]; + fixup_map_array_wo++; + } while (*fixup_map_array_wo); + } + if (*fixup_map_array_small) { + map_fds[16] = __create_map(BPF_MAP_TYPE_ARRAY, sizeof(int), + 1, 1, 0); + update_map(map_fds[16], 0); + do { + prog[*fixup_map_array_small].imm = map_fds[16]; + fixup_map_array_small++; + } while (*fixup_map_array_small); + } + if (*fixup_sk_storage_map) { + map_fds[17] = create_sk_storage_map(); + do { + prog[*fixup_sk_storage_map].imm = map_fds[17]; + fixup_sk_storage_map++; + } while (*fixup_sk_storage_map); + } } static int set_admin(bool admin) @@ -718,12 +858,17 @@ static void do_test_single(struct bpf_test *test, bool unpriv, prog_type = BPF_PROG_TYPE_SOCKET_FILTER; fixup_skips = skips; do_test_fixup(test, prog_type, prog, map_fds); + if (test->fill_insns) { + prog = test->fill_insns; + prog_len = test->prog_len; + } else { + prog_len = probe_filter_length(prog); + } /* If there were some map skips during fixup due to missing bpf * features, skip this test. */ if (fixup_skips != skips) return; - prog_len = probe_filter_length(prog); pflags = 0; if (test->flags & F_LOAD_WITH_STRICT_ALIGNMENT) @@ -731,7 +876,7 @@ static void do_test_single(struct bpf_test *test, bool unpriv, if (test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS) pflags |= BPF_F_ANY_ALIGNMENT; fd_prog = bpf_verify_program(prog_type, prog, prog_len, pflags, - "GPL", 0, bpf_vlog, sizeof(bpf_vlog), 1); + "GPL", 0, bpf_vlog, sizeof(bpf_vlog), 4); if (fd_prog < 0 && !bpf_probe_prog_type(prog_type, 0)) { printf("SKIP (unsupported program type %d)\n", prog_type); skips++; @@ -830,6 +975,8 @@ static void do_test_single(struct bpf_test *test, bool unpriv, goto fail_log; } close_fds: + if (test->fill_insns) + free(test->fill_insns); close(fd_prog); for (i = 0; i < MAX_NR_MAPS; i++) close(map_fds[i]); diff --git a/tools/testing/selftests/bpf/trace_helpers.c b/tools/testing/selftests/bpf/trace_helpers.c index 4cdb63bf0521..9a9fc6c9b70b 100644 --- a/tools/testing/selftests/bpf/trace_helpers.c +++ b/tools/testing/selftests/bpf/trace_helpers.c @@ -52,6 +52,10 @@ struct ksym *ksym_search(long key) int start = 0, end = sym_cnt; int result; + /* kallsyms not loaded. return NULL */ + if (sym_cnt <= 0) + return NULL; + while (start < end) { size_t mid = start + (end - start) / 2; diff --git a/tools/testing/selftests/bpf/urandom_read.c b/tools/testing/selftests/bpf/urandom_read.c index 9de8b7cb4e6d..db781052758d 100644 --- a/tools/testing/selftests/bpf/urandom_read.c +++ b/tools/testing/selftests/bpf/urandom_read.c @@ -7,11 +7,19 @@ #define BUF_SIZE 256 +static __attribute__((noinline)) +void urandom_read(int fd, int count) +{ + char buf[BUF_SIZE]; + int i; + + for (i = 0; i < count; ++i) + read(fd, buf, BUF_SIZE); +} + int main(int argc, char *argv[]) { int fd = open("/dev/urandom", O_RDONLY); - int i; - char buf[BUF_SIZE]; int count = 4; if (fd < 0) @@ -20,8 +28,7 @@ int main(int argc, char *argv[]) if (argc == 2) count = atoi(argv[1]); - for (i = 0; i < count; ++i) - read(fd, buf, BUF_SIZE); + urandom_read(fd, count); close(fd); return 0; diff --git a/tools/testing/selftests/bpf/verifier/array_access.c b/tools/testing/selftests/bpf/verifier/array_access.c index 0dcecaf3ec6f..bcb83196e459 100644 --- a/tools/testing/selftests/bpf/verifier/array_access.c +++ b/tools/testing/selftests/bpf/verifier/array_access.c @@ -217,3 +217,162 @@ .result = REJECT, .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, }, +{ + "valid read map access into a read-only array 1", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_ro = { 3 }, + .result = ACCEPT, + .retval = 28, +}, +{ + "valid read map access into a read-only array 2", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_MOV64_IMM(BPF_REG_2, 4), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_MOV64_IMM(BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_5, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_csum_diff), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .fixup_map_array_ro = { 3 }, + .result = ACCEPT, + .retval = -29, +}, +{ + "invalid write map access into a read-only array 1", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 42), + BPF_EXIT_INSN(), + }, + .fixup_map_array_ro = { 3 }, + .result = REJECT, + .errstr = "write into map forbidden", +}, +{ + "invalid write map access into a read-only array 2", + .insns = { + BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 5), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_6), + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_MOV64_REG(BPF_REG_3, BPF_REG_0), + BPF_MOV64_IMM(BPF_REG_4, 8), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_skb_load_bytes), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .fixup_map_array_ro = { 4 }, + .result = REJECT, + .errstr = "write into map forbidden", +}, +{ + "valid write map access into a write-only array 1", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 42), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .fixup_map_array_wo = { 3 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "valid write map access into a write-only array 2", + .insns = { + BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 5), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_6), + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_MOV64_REG(BPF_REG_3, BPF_REG_0), + BPF_MOV64_IMM(BPF_REG_4, 8), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_skb_load_bytes), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .fixup_map_array_wo = { 4 }, + .result = ACCEPT, + .retval = 0, +}, +{ + "invalid read map access into a write-only array 1", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_wo = { 3 }, + .result = REJECT, + .errstr = "read from map forbidden", +}, +{ + "invalid read map access into a write-only array 2", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_MOV64_IMM(BPF_REG_2, 4), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_MOV64_IMM(BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_5, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_csum_diff), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .fixup_map_array_wo = { 3 }, + .result = REJECT, + .errstr = "read from map forbidden", +}, diff --git a/tools/testing/selftests/bpf/verifier/calls.c b/tools/testing/selftests/bpf/verifier/calls.c index f2ccae39ee66..9093a8f64dc6 100644 --- a/tools/testing/selftests/bpf/verifier/calls.c +++ b/tools/testing/selftests/bpf/verifier/calls.c @@ -375,6 +375,31 @@ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, }, { + "calls: ptr null check in subprog", + .insns = { + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 3), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_6, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .errstr_unpriv = "function calls to other bpf functions are allowed for root only", + .fixup_map_hash_48b = { 3 }, + .result_unpriv = REJECT, + .result = ACCEPT, + .retval = 0, +}, +{ "calls: two calls with args", .insns = { BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 1), @@ -908,6 +933,44 @@ .result = REJECT, }, { + "calls: stack depth check in dead code", + .insns = { + /* main */ + BPF_MOV64_IMM(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call A */ + BPF_EXIT_INSN(), + /* A */ + BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1), + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 2), /* call B */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + /* B */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call C */ + BPF_EXIT_INSN(), + /* C */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call D */ + BPF_EXIT_INSN(), + /* D */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call E */ + BPF_EXIT_INSN(), + /* E */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call F */ + BPF_EXIT_INSN(), + /* F */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call G */ + BPF_EXIT_INSN(), + /* G */ + BPF_RAW_INSN(BPF_JMP|BPF_CALL, 0, 1, 0, 1), /* call H */ + BPF_EXIT_INSN(), + /* H */ + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_XDP, + .errstr = "call stack", + .result = REJECT, +}, +{ "calls: spill into caller stack frame", .insns = { BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), diff --git a/tools/testing/selftests/bpf/verifier/ctx_skb.c b/tools/testing/selftests/bpf/verifier/ctx_skb.c index c660deb582f1..b0fda2877119 100644 --- a/tools/testing/selftests/bpf/verifier/ctx_skb.c +++ b/tools/testing/selftests/bpf/verifier/ctx_skb.c @@ -705,7 +705,6 @@ .errstr = "invalid bpf_context access", .result = REJECT, .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, - .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, }, { "check cb access: half, wrong type", diff --git a/tools/testing/selftests/bpf/verifier/direct_packet_access.c b/tools/testing/selftests/bpf/verifier/direct_packet_access.c index e3fc22e672c2..d5c596fdc4b9 100644 --- a/tools/testing/selftests/bpf/verifier/direct_packet_access.c +++ b/tools/testing/selftests/bpf/verifier/direct_packet_access.c @@ -631,3 +631,25 @@ .errstr = "invalid access to packet", .prog_type = BPF_PROG_TYPE_SCHED_CLS, }, +{ + "direct packet access: test29 (reg > pkt_end in subprog)", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_6, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_MOV64_REG(BPF_REG_3, BPF_REG_6), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 8), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 4), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_6, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_2, 1), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, +}, diff --git a/tools/testing/selftests/bpf/verifier/direct_value_access.c b/tools/testing/selftests/bpf/verifier/direct_value_access.c new file mode 100644 index 000000000000..b9fb28e8e224 --- /dev/null +++ b/tools/testing/selftests/bpf/verifier/direct_value_access.c @@ -0,0 +1,347 @@ +{ + "direct map access, write test 1", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 0), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 0, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 2", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 8), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 0, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 3", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 8), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 4", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 40), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 0, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 5", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 32), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 6", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 40), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 4, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "R1 min value is outside of the array range", +}, +{ + "direct map access, write test 7", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, -1), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 4, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "direct value offset of 4294967295 is not allowed", +}, +{ + "direct map access, write test 8", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 1), + BPF_ST_MEM(BPF_DW, BPF_REG_1, -1, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 9", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 48), + BPF_ST_MEM(BPF_DW, BPF_REG_1, 0, 4242), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid access to map value pointer", +}, +{ + "direct map access, write test 10", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 47), + BPF_ST_MEM(BPF_B, BPF_REG_1, 0, 4), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 11", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 48), + BPF_ST_MEM(BPF_B, BPF_REG_1, 0, 4), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid access to map value pointer", +}, +{ + "direct map access, write test 12", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, (1<<29)), + BPF_ST_MEM(BPF_B, BPF_REG_1, 0, 4), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "direct value offset of 536870912 is not allowed", +}, +{ + "direct map access, write test 13", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, (1<<29)-1), + BPF_ST_MEM(BPF_B, BPF_REG_1, 0, 4), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid access to map value pointer, value_size=48 off=536870911", +}, +{ + "direct map access, write test 14", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 47), + BPF_LD_MAP_VALUE(BPF_REG_2, 0, 46), + BPF_ST_MEM(BPF_H, BPF_REG_2, 0, 0xffff), + BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1, 3 }, + .result = ACCEPT, + .retval = 0xff, +}, +{ + "direct map access, write test 15", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 46), + BPF_LD_MAP_VALUE(BPF_REG_2, 0, 46), + BPF_ST_MEM(BPF_H, BPF_REG_2, 0, 0xffff), + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1, 3 }, + .result = ACCEPT, + .retval = 0xffff, +}, +{ + "direct map access, write test 16", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 46), + BPF_LD_MAP_VALUE(BPF_REG_2, 0, 47), + BPF_ST_MEM(BPF_H, BPF_REG_2, 0, 0xffff), + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1, 3 }, + .result = REJECT, + .errstr = "invalid access to map value, value_size=48 off=47 size=2", +}, +{ + "direct map access, write test 17", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 46), + BPF_LD_MAP_VALUE(BPF_REG_2, 0, 46), + BPF_ST_MEM(BPF_H, BPF_REG_2, 1, 0xffff), + BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1, 3 }, + .result = REJECT, + .errstr = "invalid access to map value, value_size=48 off=47 size=2", +}, +{ + "direct map access, write test 18", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 0), + BPF_ST_MEM(BPF_H, BPF_REG_1, 0, 42), + BPF_EXIT_INSN(), + }, + .fixup_map_array_small = { 1 }, + .result = REJECT, + .errstr = "R1 min value is outside of the array range", +}, +{ + "direct map access, write test 19", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 0), + BPF_ST_MEM(BPF_B, BPF_REG_1, 0, 42), + BPF_EXIT_INSN(), + }, + .fixup_map_array_small = { 1 }, + .result = ACCEPT, + .retval = 1, +}, +{ + "direct map access, write test 20", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_MAP_VALUE(BPF_REG_1, 0, 1), + BPF_ST_MEM(BPF_B, BPF_REG_1, 0, 42), + BPF_EXIT_INSN(), + }, + .fixup_map_array_small = { 1 }, + .result = REJECT, + .errstr = "invalid access to map value pointer", +}, +{ + "direct map access, invalid insn test 1", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_VALUE, 0, 1, 0, 47), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid bpf_ld_imm64 insn", +}, +{ + "direct map access, invalid insn test 2", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_VALUE, 1, 0, 0, 47), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "BPF_LD_IMM64 uses reserved fields", +}, +{ + "direct map access, invalid insn test 3", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_VALUE, ~0, 0, 0, 47), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "BPF_LD_IMM64 uses reserved fields", +}, +{ + "direct map access, invalid insn test 4", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_VALUE, 0, ~0, 0, 47), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid bpf_ld_imm64 insn", +}, +{ + "direct map access, invalid insn test 5", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_VALUE, ~0, ~0, 0, 47), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid bpf_ld_imm64 insn", +}, +{ + "direct map access, invalid insn test 6", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_FD, ~0, 0, 0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "BPF_LD_IMM64 uses reserved fields", +}, +{ + "direct map access, invalid insn test 7", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_FD, 0, ~0, 0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid bpf_ld_imm64 insn", +}, +{ + "direct map access, invalid insn test 8", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_FD, ~0, ~0, 0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "invalid bpf_ld_imm64 insn", +}, +{ + "direct map access, invalid insn test 9", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_LD_IMM64_RAW_FULL(BPF_REG_1, BPF_PSEUDO_MAP_FD, 0, 0, 0, 47), + BPF_EXIT_INSN(), + }, + .fixup_map_array_48b = { 1 }, + .result = REJECT, + .errstr = "unrecognized bpf_ld_imm64 insn", +}, diff --git a/tools/testing/selftests/bpf/verifier/int_ptr.c b/tools/testing/selftests/bpf/verifier/int_ptr.c new file mode 100644 index 000000000000..ca3b4729df66 --- /dev/null +++ b/tools/testing/selftests/bpf/verifier/int_ptr.c @@ -0,0 +1,160 @@ +{ + "ARG_PTR_TO_LONG uninitialized", + .insns = { + /* bpf_strtoul arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* bpf_strtoul arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* bpf_strtoul arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* bpf_strtoul arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + /* bpf_strtoul() */ + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .result = REJECT, + .prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL, + .errstr = "invalid indirect read from stack off -16+0 size 8", +}, +{ + "ARG_PTR_TO_LONG half-uninitialized", + .insns = { + /* bpf_strtoul arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* bpf_strtoul arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* bpf_strtoul arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* bpf_strtoul arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_W, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + /* bpf_strtoul() */ + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .result = REJECT, + .prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL, + .errstr = "invalid indirect read from stack off -16+4 size 8", +}, +{ + "ARG_PTR_TO_LONG misaligned", + .insns = { + /* bpf_strtoul arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* bpf_strtoul arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* bpf_strtoul arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* bpf_strtoul arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -12), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_STX_MEM(BPF_W, BPF_REG_7, BPF_REG_0, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 4), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + /* bpf_strtoul() */ + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .result = REJECT, + .prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL, + .errstr = "misaligned stack access off (0x0; 0x0)+-20+0 size 8", +}, +{ + "ARG_PTR_TO_LONG size < sizeof(long)", + .insns = { + /* bpf_strtoul arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -16), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* bpf_strtoul arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* bpf_strtoul arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* bpf_strtoul arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, 12), + BPF_STX_MEM(BPF_W, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + /* bpf_strtoul() */ + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .result = REJECT, + .prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL, + .errstr = "invalid stack type R4 off=-4 access_size=8", +}, +{ + "ARG_PTR_TO_LONG initialized", + .insns = { + /* bpf_strtoul arg1 (buf) */ + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_MOV64_IMM(BPF_REG_0, 0x00303036), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + + BPF_MOV64_REG(BPF_REG_1, BPF_REG_7), + + /* bpf_strtoul arg2 (buf_len) */ + BPF_MOV64_IMM(BPF_REG_2, 4), + + /* bpf_strtoul arg3 (flags) */ + BPF_MOV64_IMM(BPF_REG_3, 0), + + /* bpf_strtoul arg4 (res) */ + BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_7, BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_4, BPF_REG_7), + + /* bpf_strtoul() */ + BPF_EMIT_CALL(BPF_FUNC_strtoul), + + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_CGROUP_SYSCTL, +}, diff --git a/tools/testing/selftests/bpf/verifier/jit.c b/tools/testing/selftests/bpf/verifier/jit.c index be488b4495a3..c33adf344fae 100644 --- a/tools/testing/selftests/bpf/verifier/jit.c +++ b/tools/testing/selftests/bpf/verifier/jit.c @@ -86,3 +86,22 @@ .result = ACCEPT, .retval = 2, }, +{ + "jit: jsgt, jslt", + .insns = { + BPF_LD_IMM64(BPF_REG_1, 0x80000000ULL), + BPF_LD_IMM64(BPF_REG_2, 0x0ULL), + BPF_JMP_REG(BPF_JSGT, BPF_REG_1, BPF_REG_2, 2), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + + BPF_JMP_REG(BPF_JSLT, BPF_REG_2, BPF_REG_1, 2), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + + BPF_MOV64_IMM(BPF_REG_0, 2), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .retval = 2, +}, diff --git a/tools/testing/selftests/bpf/verifier/jump.c b/tools/testing/selftests/bpf/verifier/jump.c index 8e6fcc8940f0..6f951d1ff0a4 100644 --- a/tools/testing/selftests/bpf/verifier/jump.c +++ b/tools/testing/selftests/bpf/verifier/jump.c @@ -178,3 +178,198 @@ .result_unpriv = REJECT, .result = ACCEPT, }, +{ + "jump test 6", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_MOV64_IMM(BPF_REG_1, 2), + BPF_JMP_IMM(BPF_JA, 0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 2), + BPF_EXIT_INSN(), + BPF_JMP_REG(BPF_JNE, BPF_REG_0, BPF_REG_1, 16), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, 0), + BPF_JMP_IMM(BPF_JA, 0, 0, -20), + }, + .result = ACCEPT, + .retval = 2, +}, +{ + "jump test 7", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_IMM(BPF_JA, 0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 3), + BPF_EXIT_INSN(), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 2, 16), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_JMP_IMM(BPF_JA, 0, 0, -20), + }, + .result = ACCEPT, + .retval = 3, +}, +{ + "jump test 8", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_MOV64_IMM(BPF_REG_1, 2), + BPF_JMP_IMM(BPF_JA, 0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 3), + BPF_EXIT_INSN(), + BPF_JMP_REG(BPF_JNE, BPF_REG_0, BPF_REG_1, 16), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_JMP_IMM(BPF_JA, 0, 0, -20), + }, + .result = ACCEPT, + .retval = 3, +}, +{ + "jump/call test 9", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_IMM(BPF_JA, 0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 3), + BPF_EXIT_INSN(), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 2, 16), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, -20), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = REJECT, + .errstr = "jump out of range from insn 1 to 4", +}, +{ + "jump/call test 10", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 3), + BPF_EXIT_INSN(), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 2, 16), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, -20), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = REJECT, + .errstr = "last insn is not an exit or jmp", +}, +{ + "jump/call test 11", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 4), + BPF_MOV64_IMM(BPF_REG_0, 3), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 3), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 2, 26), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, -31), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + .retval = 3, +}, diff --git a/tools/testing/selftests/bpf/verifier/ld_dw.c b/tools/testing/selftests/bpf/verifier/ld_dw.c index d2c75b889598..0f18e62f0099 100644 --- a/tools/testing/selftests/bpf/verifier/ld_dw.c +++ b/tools/testing/selftests/bpf/verifier/ld_dw.c @@ -34,3 +34,12 @@ .result = ACCEPT, .retval = 5, }, +{ + "ld_dw: xor semi-random 64 bit imms, test 5", + .insns = { }, + .data = { }, + .fill_helper = bpf_fill_rand_ld_dw, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + .retval = 1000000 - 6, +}, diff --git a/tools/testing/selftests/bpf/verifier/raw_tp_writable.c b/tools/testing/selftests/bpf/verifier/raw_tp_writable.c new file mode 100644 index 000000000000..95b5d70a1dc1 --- /dev/null +++ b/tools/testing/selftests/bpf/verifier/raw_tp_writable.c @@ -0,0 +1,34 @@ +{ + "raw_tracepoint_writable: reject variable offset", + .insns = { + /* r6 is our tp buffer */ + BPF_LDX_MEM(BPF_DW, BPF_REG_6, BPF_REG_1, 0), + + BPF_LD_MAP_FD(BPF_REG_1, 0), + /* move the key (== 0) to r10-8 */ + BPF_MOV32_IMM(BPF_REG_0, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_STX_MEM(BPF_DW, BPF_REG_2, BPF_REG_0, 0), + /* lookup in the map */ + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, + BPF_FUNC_map_lookup_elem), + + /* exit clean if null */ + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + + /* shift the buffer pointer to a variable location */ + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_0, 0), + BPF_ALU64_REG(BPF_ADD, BPF_REG_6, BPF_REG_0), + /* clobber whatever's there */ + BPF_MOV64_IMM(BPF_REG_7, 4242), + BPF_STX_MEM(BPF_DW, BPF_REG_6, BPF_REG_7, 0), + + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 1, }, + .prog_type = BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + .errstr = "R6 invalid variable buffer offset: off=0, var_off=(0x0; 0xffffffff)", +}, diff --git a/tools/testing/selftests/bpf/verifier/ref_tracking.c b/tools/testing/selftests/bpf/verifier/ref_tracking.c index 923f2110072d..ebcbf154c460 100644 --- a/tools/testing/selftests/bpf/verifier/ref_tracking.c +++ b/tools/testing/selftests/bpf/verifier/ref_tracking.c @@ -1,7 +1,18 @@ { "reference tracking: leak potential reference", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), + BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), /* leak reference */ + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .errstr = "Unreleased reference", + .result = REJECT, +}, +{ + "reference tracking: leak potential reference to sock_common", + .insns = { + BPF_SK_LOOKUP(skc_lookup_tcp), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), /* leak reference */ BPF_EXIT_INSN(), }, @@ -12,7 +23,7 @@ { "reference tracking: leak potential reference on stack", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_4, BPF_REG_10), BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, -8), BPF_STX_MEM(BPF_DW, BPF_REG_4, BPF_REG_0, 0), @@ -26,7 +37,7 @@ { "reference tracking: leak potential reference on stack 2", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_4, BPF_REG_10), BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, -8), BPF_STX_MEM(BPF_DW, BPF_REG_4, BPF_REG_0, 0), @@ -41,7 +52,18 @@ { "reference tracking: zero potential reference", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), + BPF_MOV64_IMM(BPF_REG_0, 0), /* leak reference */ + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .errstr = "Unreleased reference", + .result = REJECT, +}, +{ + "reference tracking: zero potential reference to sock_common", + .insns = { + BPF_SK_LOOKUP(skc_lookup_tcp), BPF_MOV64_IMM(BPF_REG_0, 0), /* leak reference */ BPF_EXIT_INSN(), }, @@ -52,7 +74,7 @@ { "reference tracking: copy and zero potential references", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_7, BPF_REG_0), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_MOV64_IMM(BPF_REG_7, 0), /* leak reference */ @@ -65,7 +87,7 @@ { "reference tracking: release reference without check", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), /* reference in r0 may be NULL */ BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_MOV64_IMM(BPF_REG_2, 0), @@ -77,9 +99,35 @@ .result = REJECT, }, { + "reference tracking: release reference to sock_common without check", + .insns = { + BPF_SK_LOOKUP(skc_lookup_tcp), + /* reference in r0 may be NULL */ + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_release), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .errstr = "type=sock_common_or_null expected=sock", + .result = REJECT, +}, +{ "reference tracking: release reference", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), + BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_EMIT_CALL(BPF_FUNC_sk_release), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, +}, +{ + "reference tracking: release reference to sock_common", + .insns = { + BPF_SK_LOOKUP(skc_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), BPF_EMIT_CALL(BPF_FUNC_sk_release), @@ -91,7 +139,7 @@ { "reference tracking: release reference 2", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), @@ -104,7 +152,7 @@ { "reference tracking: release reference twice", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), @@ -120,7 +168,7 @@ { "reference tracking: release reference twice inside branch", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 3), /* goto end */ @@ -147,7 +195,7 @@ BPF_EXIT_INSN(), BPF_LDX_MEM(BPF_W, BPF_REG_6, BPF_REG_2, offsetof(struct __sk_buff, mark)), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JEQ, BPF_REG_6, 0, 1), /* mark == 0? */ /* Leak reference in R0 */ BPF_EXIT_INSN(), @@ -175,7 +223,7 @@ BPF_EXIT_INSN(), BPF_LDX_MEM(BPF_W, BPF_REG_6, BPF_REG_2, offsetof(struct __sk_buff, mark)), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JEQ, BPF_REG_6, 0, 4), /* mark == 0? */ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), /* sk NULL? */ BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), @@ -193,7 +241,7 @@ { "reference tracking in call: free reference in subprog", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), /* unchecked reference */ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 2), BPF_MOV64_IMM(BPF_REG_0, 0), @@ -211,7 +259,7 @@ { "reference tracking in call: free reference in subprog and outside", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), /* unchecked reference */ BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 3), @@ -241,7 +289,7 @@ /* subprog 1 */ BPF_MOV64_REG(BPF_REG_6, BPF_REG_4), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), /* spill unchecked sk_ptr into stack of caller */ BPF_STX_MEM(BPF_DW, BPF_REG_6, BPF_REG_0, 0), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), @@ -262,7 +310,7 @@ BPF_EXIT_INSN(), /* subprog 1 */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_EXIT_INSN(), /* return sk */ }, .prog_type = BPF_PROG_TYPE_SCHED_CLS, @@ -291,7 +339,7 @@ BPF_EXIT_INSN(), /* subprog 2 */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SCHED_CLS, @@ -324,7 +372,7 @@ BPF_EXIT_INSN(), /* subprog 2 */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SCHED_CLS, @@ -334,7 +382,7 @@ "reference tracking: allow LD_ABS", .insns = { BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), BPF_EMIT_CALL(BPF_FUNC_sk_release), @@ -350,7 +398,7 @@ "reference tracking: forbid LD_ABS while holding reference", .insns = { BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_LD_ABS(BPF_B, 0), BPF_LD_ABS(BPF_H, 0), BPF_LD_ABS(BPF_W, 0), @@ -367,7 +415,7 @@ "reference tracking: allow LD_IND", .insns = { BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), BPF_EMIT_CALL(BPF_FUNC_sk_release), @@ -384,7 +432,7 @@ "reference tracking: forbid LD_IND while holding reference", .insns = { BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_4, BPF_REG_0), BPF_MOV64_IMM(BPF_REG_7, 1), BPF_LD_IND(BPF_W, BPF_REG_7, -0x200000), @@ -402,7 +450,7 @@ "reference tracking: check reference or tail call", .insns = { BPF_MOV64_REG(BPF_REG_7, BPF_REG_1), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), /* if (sk) bpf_sk_release() */ BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JNE, BPF_REG_1, 0, 7), @@ -424,7 +472,7 @@ "reference tracking: release reference then tail call", .insns = { BPF_MOV64_REG(BPF_REG_7, BPF_REG_1), - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), /* if (sk) bpf_sk_release() */ BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1), @@ -446,7 +494,7 @@ .insns = { BPF_MOV64_REG(BPF_REG_7, BPF_REG_1), /* Look up socket and store in REG_6 */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), /* bpf_tail_call() */ BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), BPF_MOV64_IMM(BPF_REG_3, 2), @@ -470,7 +518,7 @@ .insns = { BPF_MOV64_REG(BPF_REG_7, BPF_REG_1), /* Look up socket and store in REG_6 */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), /* if (!sk) goto end */ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 7), @@ -492,7 +540,7 @@ { "reference tracking: mangle and release sock_or_null", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 5), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), @@ -506,7 +554,7 @@ { "reference tracking: mangle and release sock", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 5), @@ -520,7 +568,7 @@ { "reference tracking: access member", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 3), BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_0, 4), @@ -534,7 +582,7 @@ { "reference tracking: write to member", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 5), BPF_MOV64_REG(BPF_REG_1, BPF_REG_6), @@ -553,7 +601,7 @@ { "reference tracking: invalid 64-bit access of member", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 3), BPF_LDX_MEM(BPF_DW, BPF_REG_2, BPF_REG_0, 0), @@ -568,7 +616,7 @@ { "reference tracking: access after release", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), BPF_EMIT_CALL(BPF_FUNC_sk_release), @@ -608,7 +656,7 @@ { "reference tracking: use ptr from bpf_tcp_sock() after release", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), @@ -631,7 +679,7 @@ { "reference tracking: use ptr from bpf_sk_fullsock() after release", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), @@ -654,7 +702,7 @@ { "reference tracking: use ptr from bpf_sk_fullsock(tp) after release", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), @@ -681,7 +729,7 @@ { "reference tracking: use sk after bpf_sk_release(tp)", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), @@ -703,7 +751,7 @@ { "reference tracking: use ptr from bpf_get_listener_sock() after bpf_sk_release(sk)", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), @@ -725,7 +773,7 @@ { "reference tracking: bpf_sk_release(listen_sk)", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), @@ -750,7 +798,7 @@ /* !bpf_sk_fullsock(sk) is checked but !bpf_tcp_sock(sk) is not checked */ "reference tracking: tp->snd_cwnd after bpf_sk_fullsock(sk) and bpf_tcp_sock(sk)", .insns = { - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), diff --git a/tools/testing/selftests/bpf/verifier/scale.c b/tools/testing/selftests/bpf/verifier/scale.c new file mode 100644 index 000000000000..7f868d4802e0 --- /dev/null +++ b/tools/testing/selftests/bpf/verifier/scale.c @@ -0,0 +1,18 @@ +{ + "scale: scale test 1", + .insns = { }, + .data = { }, + .fill_helper = bpf_fill_scale, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + .retval = 1, +}, +{ + "scale: scale test 2", + .insns = { }, + .data = { }, + .fill_helper = bpf_fill_scale, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + .retval = 2, +}, diff --git a/tools/testing/selftests/bpf/verifier/sock.c b/tools/testing/selftests/bpf/verifier/sock.c index 416436231fab..b31cd2cf50d0 100644 --- a/tools/testing/selftests/bpf/verifier/sock.c +++ b/tools/testing/selftests/bpf/verifier/sock.c @@ -382,3 +382,119 @@ .result = REJECT, .errstr = "reference has not been acquired before", }, +{ + "sk_storage_get(map, skb->sk, NULL, 0): value == NULL", + .insns = { + BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_1, offsetof(struct __sk_buff, sk)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_1, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_EMIT_CALL(BPF_FUNC_sk_fullsock), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_storage_get), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_sk_storage_map = { 11 }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, +}, +{ + "sk_storage_get(map, skb->sk, 1, 1): value == 1", + .insns = { + BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_1, offsetof(struct __sk_buff, sk)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_1, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_EMIT_CALL(BPF_FUNC_sk_fullsock), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_4, 1), + BPF_MOV64_IMM(BPF_REG_3, 1), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_storage_get), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_sk_storage_map = { 11 }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = REJECT, + .errstr = "R3 type=inv expected=fp", +}, +{ + "sk_storage_get(map, skb->sk, &stack_value, 1): stack_value", + .insns = { + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_2, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_1, offsetof(struct __sk_buff, sk)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_1, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_EMIT_CALL(BPF_FUNC_sk_fullsock), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_4, 1), + BPF_MOV64_REG(BPF_REG_3, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, -8), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_storage_get), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_sk_storage_map = { 14 }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, +}, +{ + "sk_storage_get(map, skb->sk, &stack_value, 1): partially init stack_value", + .insns = { + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8), + BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_1, offsetof(struct __sk_buff, sk)), + BPF_JMP_IMM(BPF_JNE, BPF_REG_1, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_EMIT_CALL(BPF_FUNC_sk_fullsock), + BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_4, 1), + BPF_MOV64_REG(BPF_REG_3, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, -8), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_storage_get), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_sk_storage_map = { 14 }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = REJECT, + .errstr = "invalid indirect read from stack", +}, +{ + "bpf_map_lookup_elem(smap, &key)", + .insns = { + BPF_ST_MEM(BPF_W, BPF_REG_10, -4, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_sk_storage_map = { 3 }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = REJECT, + .errstr = "cannot pass map_type 24 into func bpf_map_lookup_elem", +}, diff --git a/tools/testing/selftests/bpf/verifier/unpriv.c b/tools/testing/selftests/bpf/verifier/unpriv.c index dbaf5be947b2..91bb77c24a2e 100644 --- a/tools/testing/selftests/bpf/verifier/unpriv.c +++ b/tools/testing/selftests/bpf/verifier/unpriv.c @@ -242,7 +242,7 @@ .insns = { BPF_MOV64_REG(BPF_REG_8, BPF_REG_1), /* struct bpf_sock *sock = bpf_sock_lookup(...); */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), /* u64 foo; */ /* void *target = &foo; */ @@ -276,7 +276,7 @@ .insns = { BPF_MOV64_REG(BPF_REG_8, BPF_REG_1), /* struct bpf_sock *sock = bpf_sock_lookup(...); */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), /* u64 foo; */ /* void *target = &foo; */ @@ -307,7 +307,7 @@ .insns = { BPF_MOV64_REG(BPF_REG_8, BPF_REG_1), /* struct bpf_sock *sock = bpf_sock_lookup(...); */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), /* u64 foo; */ /* void *target = &foo; */ @@ -339,7 +339,7 @@ .insns = { BPF_MOV64_REG(BPF_REG_8, BPF_REG_1), /* struct bpf_sock *sock = bpf_sock_lookup(...); */ - BPF_SK_LOOKUP, + BPF_SK_LOOKUP(sk_lookup_tcp), BPF_MOV64_REG(BPF_REG_2, BPF_REG_0), /* u64 foo; */ /* void *target = &foo; */ diff --git a/tools/testing/selftests/bpf/verifier/var_off.c b/tools/testing/selftests/bpf/verifier/var_off.c index 1e536ff121a5..8504ac937809 100644 --- a/tools/testing/selftests/bpf/verifier/var_off.c +++ b/tools/testing/selftests/bpf/verifier/var_off.c @@ -40,7 +40,35 @@ .prog_type = BPF_PROG_TYPE_LWT_IN, }, { - "indirect variable-offset stack access", + "indirect variable-offset stack access, unbounded", + .insns = { + BPF_MOV64_IMM(BPF_REG_2, 6), + BPF_MOV64_IMM(BPF_REG_3, 28), + /* Fill the top 16 bytes of the stack. */ + BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, 0), + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + /* Get an unknown value. */ + BPF_LDX_MEM(BPF_DW, BPF_REG_4, BPF_REG_1, offsetof(struct bpf_sock_ops, + bytes_received)), + /* Check the lower bound but don't check the upper one. */ + BPF_JMP_IMM(BPF_JSLT, BPF_REG_4, 0, 4), + /* Point the lower bound to initialized stack. Offset is now in range + * from fp-16 to fp+0x7fffffffffffffef, i.e. max value is unbounded. + */ + BPF_ALU64_IMM(BPF_SUB, BPF_REG_4, 16), + BPF_ALU64_REG(BPF_ADD, BPF_REG_4, BPF_REG_10), + BPF_MOV64_IMM(BPF_REG_5, 8), + /* Dereference it indirectly. */ + BPF_EMIT_CALL(BPF_FUNC_getsockopt), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .errstr = "R4 unbounded indirect variable offset stack access", + .result = REJECT, + .prog_type = BPF_PROG_TYPE_SOCK_OPS, +}, +{ + "indirect variable-offset stack access, max out of bound", .insns = { /* Fill the top 8 bytes of the stack */ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), @@ -60,7 +88,161 @@ BPF_EXIT_INSN(), }, .fixup_map_hash_8b = { 5 }, - .errstr = "variable stack read R2", + .errstr = "R2 max value is outside of stack bound", + .result = REJECT, + .prog_type = BPF_PROG_TYPE_LWT_IN, +}, +{ + "indirect variable-offset stack access, min out of bound", + .insns = { + /* Fill the top 8 bytes of the stack */ + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + /* Get an unknown value */ + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, 0), + /* Make it small and 4-byte aligned */ + BPF_ALU64_IMM(BPF_AND, BPF_REG_2, 4), + BPF_ALU64_IMM(BPF_SUB, BPF_REG_2, 516), + /* add it to fp. We now have either fp-516 or fp-512, but + * we don't know which + */ + BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_10), + /* dereference it indirectly */ + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 5 }, + .errstr = "R2 min value is outside of stack bound", + .result = REJECT, + .prog_type = BPF_PROG_TYPE_LWT_IN, +}, +{ + "indirect variable-offset stack access, max_off+size > max_initialized", + .insns = { + /* Fill only the second from top 8 bytes of the stack. */ + BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, 0), + /* Get an unknown value. */ + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, 0), + /* Make it small and 4-byte aligned. */ + BPF_ALU64_IMM(BPF_AND, BPF_REG_2, 4), + BPF_ALU64_IMM(BPF_SUB, BPF_REG_2, 16), + /* Add it to fp. We now have either fp-12 or fp-16, but we don't know + * which. fp-12 size 8 is partially uninitialized stack. + */ + BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_10), + /* Dereference it indirectly. */ + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 5 }, + .errstr = "invalid indirect read from stack var_off", + .result = REJECT, + .prog_type = BPF_PROG_TYPE_LWT_IN, +}, +{ + "indirect variable-offset stack access, min_off < min_initialized", + .insns = { + /* Fill only the top 8 bytes of the stack. */ + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + /* Get an unknown value */ + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, 0), + /* Make it small and 4-byte aligned. */ + BPF_ALU64_IMM(BPF_AND, BPF_REG_2, 4), + BPF_ALU64_IMM(BPF_SUB, BPF_REG_2, 16), + /* Add it to fp. We now have either fp-12 or fp-16, but we don't know + * which. fp-16 size 8 is partially uninitialized stack. + */ + BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_10), + /* Dereference it indirectly. */ + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 5 }, + .errstr = "invalid indirect read from stack var_off", .result = REJECT, .prog_type = BPF_PROG_TYPE_LWT_IN, }, +{ + "indirect variable-offset stack access, priv vs unpriv", + .insns = { + /* Fill the top 16 bytes of the stack. */ + BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, 0), + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + /* Get an unknown value. */ + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, 0), + /* Make it small and 4-byte aligned. */ + BPF_ALU64_IMM(BPF_AND, BPF_REG_2, 4), + BPF_ALU64_IMM(BPF_SUB, BPF_REG_2, 16), + /* Add it to fp. We now have either fp-12 or fp-16, we don't know + * which, but either way it points to initialized stack. + */ + BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_10), + /* Dereference it indirectly. */ + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 6 }, + .errstr_unpriv = "R2 stack pointer arithmetic goes out of range, prohibited for !root", + .result_unpriv = REJECT, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_CGROUP_SKB, +}, +{ + "indirect variable-offset stack access, uninitialized", + .insns = { + BPF_MOV64_IMM(BPF_REG_2, 6), + BPF_MOV64_IMM(BPF_REG_3, 28), + /* Fill the top 16 bytes of the stack. */ + BPF_ST_MEM(BPF_W, BPF_REG_10, -16, 0), + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + /* Get an unknown value. */ + BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_1, 0), + /* Make it small and 4-byte aligned. */ + BPF_ALU64_IMM(BPF_AND, BPF_REG_4, 4), + BPF_ALU64_IMM(BPF_SUB, BPF_REG_4, 16), + /* Add it to fp. We now have either fp-12 or fp-16, we don't know + * which, but either way it points to initialized stack. + */ + BPF_ALU64_REG(BPF_ADD, BPF_REG_4, BPF_REG_10), + BPF_MOV64_IMM(BPF_REG_5, 8), + /* Dereference it indirectly. */ + BPF_EMIT_CALL(BPF_FUNC_getsockopt), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .errstr = "invalid indirect read from stack var_off", + .result = REJECT, + .prog_type = BPF_PROG_TYPE_SOCK_OPS, +}, +{ + "indirect variable-offset stack access, ok", + .insns = { + /* Fill the top 16 bytes of the stack. */ + BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, 0), + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + /* Get an unknown value. */ + BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, 0), + /* Make it small and 4-byte aligned. */ + BPF_ALU64_IMM(BPF_AND, BPF_REG_2, 4), + BPF_ALU64_IMM(BPF_SUB, BPF_REG_2, 16), + /* Add it to fp. We now have either fp-12 or fp-16, we don't know + * which, but either way it points to initialized stack. + */ + BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_10), + /* Dereference it indirectly. */ + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .fixup_map_hash_8b = { 6 }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_LWT_IN, +}, diff --git a/tools/testing/selftests/breakpoints/breakpoint_test.c b/tools/testing/selftests/breakpoints/breakpoint_test.c index 901b85ea6a59..8f3655e59020 100644 --- a/tools/testing/selftests/breakpoints/breakpoint_test.c +++ b/tools/testing/selftests/breakpoints/breakpoint_test.c @@ -21,6 +21,8 @@ #include "../kselftest.h" +#define COUNT_ISN_BPS 4 +#define COUNT_WPS 4 /* Breakpoint access modes */ enum { @@ -220,7 +222,7 @@ static void trigger_tests(void) if (!local && !global) continue; - for (i = 0; i < 4; i++) { + for (i = 0; i < COUNT_ISN_BPS; i++) { dummy_funcs[i](); check_trapped(); } @@ -292,7 +294,7 @@ static void launch_instruction_breakpoints(char *buf, int local, int global) { int i; - for (i = 0; i < 4; i++) { + for (i = 0; i < COUNT_ISN_BPS; i++) { set_breakpoint_addr(dummy_funcs[i], i); toggle_breakpoint(i, BP_X, 1, local, global, 1); ptrace(PTRACE_CONT, child_pid, NULL, 0); @@ -314,7 +316,7 @@ static void launch_watchpoints(char *buf, int mode, int len, else mode_str = "read"; - for (i = 0; i < 4; i++) { + for (i = 0; i < COUNT_WPS; i++) { set_breakpoint_addr(&dummy_var[i], i); toggle_breakpoint(i, mode, len, local, global, 1); ptrace(PTRACE_CONT, child_pid, NULL, 0); @@ -330,8 +332,15 @@ static void launch_watchpoints(char *buf, int mode, int len, static void launch_tests(void) { char buf[1024]; + unsigned int tests = 0; int len, local, global, i; + tests += 3 * COUNT_ISN_BPS; + tests += sizeof(long) / 2 * 3 * COUNT_WPS; + tests += sizeof(long) / 2 * 3 * COUNT_WPS; + tests += 2; + ksft_set_plan(tests); + /* Instruction breakpoints */ for (local = 0; local < 2; local++) { for (global = 0; global < 2; global++) { diff --git a/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c b/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c index 2d95e5adde72..ab59d814341a 100644 --- a/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c +++ b/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c @@ -118,7 +118,7 @@ static bool set_watchpoint(pid_t pid, int size, int wp) return false; } -static bool run_test(int wr_size, int wp_size, int wr, int wp) +static bool arun_test(int wr_size, int wp_size, int wr, int wp) { int status; siginfo_t siginfo; @@ -214,6 +214,7 @@ int main(int argc, char **argv) bool result; ksft_print_header(); + ksft_set_plan(213); act.sa_handler = sigalrm; sigemptyset(&act.sa_mask); diff --git a/tools/testing/selftests/breakpoints/step_after_suspend_test.c b/tools/testing/selftests/breakpoints/step_after_suspend_test.c index f82dcc1f8841..cf868b5e00f7 100644 --- a/tools/testing/selftests/breakpoints/step_after_suspend_test.c +++ b/tools/testing/selftests/breakpoints/step_after_suspend_test.c @@ -173,6 +173,7 @@ int main(int argc, char **argv) int opt; bool do_suspend = true; bool succeeded = true; + unsigned int tests = 0; cpu_set_t available_cpus; int err; int cpu; @@ -191,6 +192,13 @@ int main(int argc, char **argv) } } + for (cpu = 0; cpu < CPU_SETSIZE; cpu++) { + if (!CPU_ISSET(cpu, &available_cpus)) + continue; + tests++; + } + ksft_set_plan(tests); + if (do_suspend) suspend(); diff --git a/tools/testing/selftests/capabilities/test_execve.c b/tools/testing/selftests/capabilities/test_execve.c index 3ab39a61b95b..df0ef02b4036 100644 --- a/tools/testing/selftests/capabilities/test_execve.c +++ b/tools/testing/selftests/capabilities/test_execve.c @@ -430,8 +430,6 @@ int main(int argc, char **argv) { char *tmp1, *tmp2, *our_path; - ksft_print_header(); - /* Find our path */ tmp1 = strdup(argv[0]); if (!tmp1) @@ -445,6 +443,8 @@ int main(int argc, char **argv) mpid = getpid(); if (fork_wait()) { + ksft_print_header(); + ksft_set_plan(12); ksft_print_msg("[RUN]\t+++ Tests with uid == 0 +++\n"); return do_tests(0, our_path); } @@ -452,6 +452,8 @@ int main(int argc, char **argv) ksft_print_msg("==================================================\n"); if (fork_wait()) { + ksft_print_header(); + ksft_set_plan(9); ksft_print_msg("[RUN]\t+++ Tests with uid != 0 +++\n"); return do_tests(1, our_path); } diff --git a/tools/testing/selftests/cgroup/.gitignore b/tools/testing/selftests/cgroup/.gitignore index adacda50a4b2..7f9835624793 100644 --- a/tools/testing/selftests/cgroup/.gitignore +++ b/tools/testing/selftests/cgroup/.gitignore @@ -1,2 +1,3 @@ test_memcontrol test_core +test_freezer diff --git a/tools/testing/selftests/cgroup/Makefile b/tools/testing/selftests/cgroup/Makefile index 23fbaa4a9630..8d369b6a2069 100644 --- a/tools/testing/selftests/cgroup/Makefile +++ b/tools/testing/selftests/cgroup/Makefile @@ -5,8 +5,10 @@ all: TEST_GEN_PROGS = test_memcontrol TEST_GEN_PROGS += test_core +TEST_GEN_PROGS += test_freezer include ../lib.mk $(OUTPUT)/test_memcontrol: cgroup_util.c $(OUTPUT)/test_core: cgroup_util.c +$(OUTPUT)/test_freezer: cgroup_util.c diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index 14c9fe284806..4c223266299a 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -74,6 +74,16 @@ char *cg_name_indexed(const char *root, const char *name, int index) return ret; } +char *cg_control(const char *cgroup, const char *control) +{ + size_t len = strlen(cgroup) + strlen(control) + 2; + char *ret = malloc(len); + + snprintf(ret, len, "%s/%s", cgroup, control); + + return ret; +} + int cg_read(const char *cgroup, const char *control, char *buf, size_t len) { char path[PATH_MAX]; @@ -196,7 +206,32 @@ int cg_create(const char *cgroup) return mkdir(cgroup, 0644); } -static int cg_killall(const char *cgroup) +int cg_wait_for_proc_count(const char *cgroup, int count) +{ + char buf[10 * PAGE_SIZE] = {0}; + int attempts; + char *ptr; + + for (attempts = 10; attempts >= 0; attempts--) { + int nr = 0; + + if (cg_read(cgroup, "cgroup.procs", buf, sizeof(buf))) + break; + + for (ptr = buf; *ptr; ptr++) + if (*ptr == '\n') + nr++; + + if (nr >= count) + return 0; + + usleep(100000); + } + + return -1; +} + +int cg_killall(const char *cgroup) { char buf[PAGE_SIZE]; char *ptr = buf; @@ -227,9 +262,7 @@ int cg_destroy(const char *cgroup) retry: ret = rmdir(cgroup); if (ret && errno == EBUSY) { - ret = cg_killall(cgroup); - if (ret) - return ret; + cg_killall(cgroup); usleep(100); goto retry; } @@ -240,6 +273,14 @@ retry: return ret; } +int cg_enter(const char *cgroup, int pid) +{ + char pidbuf[64]; + + snprintf(pidbuf, sizeof(pidbuf), "%d", pid); + return cg_write(cgroup, "cgroup.procs", pidbuf); +} + int cg_enter_current(const char *cgroup) { char pidbuf[64]; @@ -369,3 +410,12 @@ int set_oom_adj_score(int pid, int score) close(fd); return 0; } + +char proc_read_text(int pid, const char *item, char *buf, size_t size) +{ + char path[PATH_MAX]; + + snprintf(path, sizeof(path), "/proc/%d/%s", pid, item); + + return read_text(path, buf, size); +} diff --git a/tools/testing/selftests/cgroup/cgroup_util.h b/tools/testing/selftests/cgroup/cgroup_util.h index 9ac8b7958f83..c72f28046bfa 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.h +++ b/tools/testing/selftests/cgroup/cgroup_util.h @@ -18,6 +18,7 @@ static inline int values_close(long a, long b, int err) extern int cg_find_unified_root(char *root, size_t len); extern char *cg_name(const char *root, const char *name); extern char *cg_name_indexed(const char *root, const char *name, int index); +extern char *cg_control(const char *cgroup, const char *control); extern int cg_create(const char *cgroup); extern int cg_destroy(const char *cgroup); extern int cg_read(const char *cgroup, const char *control, @@ -32,6 +33,7 @@ extern int cg_write(const char *cgroup, const char *control, char *buf); extern int cg_run(const char *cgroup, int (*fn)(const char *cgroup, void *arg), void *arg); +extern int cg_enter(const char *cgroup, int pid); extern int cg_enter_current(const char *cgroup); extern int cg_run_nowait(const char *cgroup, int (*fn)(const char *cgroup, void *arg), @@ -41,3 +43,6 @@ extern int alloc_pagecache(int fd, size_t size); extern int alloc_anon(const char *cgroup, void *arg); extern int is_swap_enabled(void); extern int set_oom_adj_score(int pid, int score); +extern int cg_wait_for_proc_count(const char *cgroup, int count); +extern int cg_killall(const char *cgroup); +extern char proc_read_text(int pid, const char *item, char *buf, size_t size); diff --git a/tools/testing/selftests/cgroup/test_freezer.c b/tools/testing/selftests/cgroup/test_freezer.c new file mode 100644 index 000000000000..2bfddb6d6d3b --- /dev/null +++ b/tools/testing/selftests/cgroup/test_freezer.c @@ -0,0 +1,851 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <stdbool.h> +#include <linux/limits.h> +#include <sys/ptrace.h> +#include <sys/types.h> +#include <sys/mman.h> +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <poll.h> +#include <stdlib.h> +#include <sys/inotify.h> +#include <string.h> +#include <sys/types.h> +#include <sys/wait.h> + +#include "../kselftest.h" +#include "cgroup_util.h" + +#define DEBUG +#ifdef DEBUG +#define debug(args...) fprintf(stderr, args) +#else +#define debug(args...) +#endif + +/* + * Check if the cgroup is frozen by looking at the cgroup.events::frozen value. + */ +static int cg_check_frozen(const char *cgroup, bool frozen) +{ + if (frozen) { + if (cg_read_strstr(cgroup, "cgroup.events", "frozen 1") != 0) { + debug("Cgroup %s isn't frozen\n", cgroup); + return -1; + } + } else { + /* + * Check the cgroup.events::frozen value. + */ + if (cg_read_strstr(cgroup, "cgroup.events", "frozen 0") != 0) { + debug("Cgroup %s is frozen\n", cgroup); + return -1; + } + } + + return 0; +} + +/* + * Freeze the given cgroup. + */ +static int cg_freeze_nowait(const char *cgroup, bool freeze) +{ + return cg_write(cgroup, "cgroup.freeze", freeze ? "1" : "0"); +} + +/* + * Prepare for waiting on cgroup.events file. + */ +static int cg_prepare_for_wait(const char *cgroup) +{ + int fd, ret = -1; + + fd = inotify_init1(0); + if (fd == -1) { + debug("Error: inotify_init1() failed\n"); + return fd; + } + + ret = inotify_add_watch(fd, cg_control(cgroup, "cgroup.events"), + IN_MODIFY); + if (ret == -1) { + debug("Error: inotify_add_watch() failed\n"); + close(fd); + } + + return fd; +} + +/* + * Wait for an event. If there are no events for 10 seconds, + * treat this an error. + */ +static int cg_wait_for(int fd) +{ + int ret = -1; + struct pollfd fds = { + .fd = fd, + .events = POLLIN, + }; + + while (true) { + ret = poll(&fds, 1, 10000); + + if (ret == -1) { + if (errno == EINTR) + continue; + debug("Error: poll() failed\n"); + break; + } + + if (ret > 0 && fds.revents & POLLIN) { + ret = 0; + break; + } + } + + return ret; +} + +/* + * Attach a task to the given cgroup and wait for a cgroup frozen event. + * All transient events (e.g. populated) are ignored. + */ +static int cg_enter_and_wait_for_frozen(const char *cgroup, int pid, + bool frozen) +{ + int fd, ret = -1; + int attempts; + + fd = cg_prepare_for_wait(cgroup); + if (fd < 0) + return fd; + + ret = cg_enter(cgroup, pid); + if (ret) + goto out; + + for (attempts = 0; attempts < 10; attempts++) { + ret = cg_wait_for(fd); + if (ret) + break; + + ret = cg_check_frozen(cgroup, frozen); + if (ret) + continue; + } + +out: + close(fd); + return ret; +} + +/* + * Freeze the given cgroup and wait for the inotify signal. + * If there are no events in 10 seconds, treat this as an error. + * Then check that the cgroup is in the desired state. + */ +static int cg_freeze_wait(const char *cgroup, bool freeze) +{ + int fd, ret = -1; + + fd = cg_prepare_for_wait(cgroup); + if (fd < 0) + return fd; + + ret = cg_freeze_nowait(cgroup, freeze); + if (ret) { + debug("Error: cg_freeze_nowait() failed\n"); + goto out; + } + + ret = cg_wait_for(fd); + if (ret) + goto out; + + ret = cg_check_frozen(cgroup, freeze); +out: + close(fd); + return ret; +} + +/* + * A simple process running in a sleep loop until being + * re-parented. + */ +static int child_fn(const char *cgroup, void *arg) +{ + int ppid = getppid(); + + while (getppid() == ppid) + usleep(1000); + + return getppid() == ppid; +} + +/* + * A simple test for the cgroup freezer: populated the cgroup with 100 + * running processes and freeze it. Then unfreeze it. Then it kills all + * processes and destroys the cgroup. + */ +static int test_cgfreezer_simple(const char *root) +{ + int ret = KSFT_FAIL; + char *cgroup = NULL; + int i; + + cgroup = cg_name(root, "cg_test_simple"); + if (!cgroup) + goto cleanup; + + if (cg_create(cgroup)) + goto cleanup; + + for (i = 0; i < 100; i++) + cg_run_nowait(cgroup, child_fn, NULL); + + if (cg_wait_for_proc_count(cgroup, 100)) + goto cleanup; + + if (cg_check_frozen(cgroup, false)) + goto cleanup; + + if (cg_freeze_wait(cgroup, true)) + goto cleanup; + + if (cg_freeze_wait(cgroup, false)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (cgroup) + cg_destroy(cgroup); + free(cgroup); + return ret; +} + +/* + * The test creates the following hierarchy: + * A + * / / \ \ + * B E I K + * /\ | + * C D F + * | + * G + * | + * H + * + * with a process in C, H and 3 processes in K. + * Then it tries to freeze and unfreeze the whole tree. + */ +static int test_cgfreezer_tree(const char *root) +{ + char *cgroup[10] = {0}; + int ret = KSFT_FAIL; + int i; + + cgroup[0] = cg_name(root, "cg_test_tree_A"); + if (!cgroup[0]) + goto cleanup; + + cgroup[1] = cg_name(cgroup[0], "B"); + if (!cgroup[1]) + goto cleanup; + + cgroup[2] = cg_name(cgroup[1], "C"); + if (!cgroup[2]) + goto cleanup; + + cgroup[3] = cg_name(cgroup[1], "D"); + if (!cgroup[3]) + goto cleanup; + + cgroup[4] = cg_name(cgroup[0], "E"); + if (!cgroup[4]) + goto cleanup; + + cgroup[5] = cg_name(cgroup[4], "F"); + if (!cgroup[5]) + goto cleanup; + + cgroup[6] = cg_name(cgroup[5], "G"); + if (!cgroup[6]) + goto cleanup; + + cgroup[7] = cg_name(cgroup[6], "H"); + if (!cgroup[7]) + goto cleanup; + + cgroup[8] = cg_name(cgroup[0], "I"); + if (!cgroup[8]) + goto cleanup; + + cgroup[9] = cg_name(cgroup[0], "K"); + if (!cgroup[9]) + goto cleanup; + + for (i = 0; i < 10; i++) + if (cg_create(cgroup[i])) + goto cleanup; + + cg_run_nowait(cgroup[2], child_fn, NULL); + cg_run_nowait(cgroup[7], child_fn, NULL); + cg_run_nowait(cgroup[9], child_fn, NULL); + cg_run_nowait(cgroup[9], child_fn, NULL); + cg_run_nowait(cgroup[9], child_fn, NULL); + + /* + * Wait until all child processes will enter + * corresponding cgroups. + */ + + if (cg_wait_for_proc_count(cgroup[2], 1) || + cg_wait_for_proc_count(cgroup[7], 1) || + cg_wait_for_proc_count(cgroup[9], 3)) + goto cleanup; + + /* + * Freeze B. + */ + if (cg_freeze_wait(cgroup[1], true)) + goto cleanup; + + /* + * Freeze F. + */ + if (cg_freeze_wait(cgroup[5], true)) + goto cleanup; + + /* + * Freeze G. + */ + if (cg_freeze_wait(cgroup[6], true)) + goto cleanup; + + /* + * Check that A and E are not frozen. + */ + if (cg_check_frozen(cgroup[0], false)) + goto cleanup; + + if (cg_check_frozen(cgroup[4], false)) + goto cleanup; + + /* + * Freeze A. Check that A, B and E are frozen. + */ + if (cg_freeze_wait(cgroup[0], true)) + goto cleanup; + + if (cg_check_frozen(cgroup[1], true)) + goto cleanup; + + if (cg_check_frozen(cgroup[4], true)) + goto cleanup; + + /* + * Unfreeze B, F and G + */ + if (cg_freeze_nowait(cgroup[1], false)) + goto cleanup; + + if (cg_freeze_nowait(cgroup[5], false)) + goto cleanup; + + if (cg_freeze_nowait(cgroup[6], false)) + goto cleanup; + + /* + * Check that C and H are still frozen. + */ + if (cg_check_frozen(cgroup[2], true)) + goto cleanup; + + if (cg_check_frozen(cgroup[7], true)) + goto cleanup; + + /* + * Unfreeze A. Check that A, C and K are not frozen. + */ + if (cg_freeze_wait(cgroup[0], false)) + goto cleanup; + + if (cg_check_frozen(cgroup[2], false)) + goto cleanup; + + if (cg_check_frozen(cgroup[9], false)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + for (i = 9; i >= 0 && cgroup[i]; i--) { + cg_destroy(cgroup[i]); + free(cgroup[i]); + } + + return ret; +} + +/* + * A fork bomb emulator. + */ +static int forkbomb_fn(const char *cgroup, void *arg) +{ + int ppid; + + fork(); + fork(); + + ppid = getppid(); + + while (getppid() == ppid) + usleep(1000); + + return getppid() == ppid; +} + +/* + * The test runs a fork bomb in a cgroup and tries to freeze it. + * Then it kills all processes and checks that cgroup isn't populated + * anymore. + */ +static int test_cgfreezer_forkbomb(const char *root) +{ + int ret = KSFT_FAIL; + char *cgroup = NULL; + + cgroup = cg_name(root, "cg_forkbomb_test"); + if (!cgroup) + goto cleanup; + + if (cg_create(cgroup)) + goto cleanup; + + cg_run_nowait(cgroup, forkbomb_fn, NULL); + + usleep(100000); + + if (cg_freeze_wait(cgroup, true)) + goto cleanup; + + if (cg_killall(cgroup)) + goto cleanup; + + if (cg_wait_for_proc_count(cgroup, 0)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (cgroup) + cg_destroy(cgroup); + free(cgroup); + return ret; +} + +/* + * The test creates two nested cgroups, freezes the parent + * and removes the child. Then it checks that the parent cgroup + * remains frozen and it's possible to create a new child + * without unfreezing. The new child is frozen too. + */ +static int test_cgfreezer_rmdir(const char *root) +{ + int ret = KSFT_FAIL; + char *parent, *child = NULL; + + parent = cg_name(root, "cg_test_rmdir_A"); + if (!parent) + goto cleanup; + + child = cg_name(parent, "cg_test_rmdir_B"); + if (!child) + goto cleanup; + + if (cg_create(parent)) + goto cleanup; + + if (cg_create(child)) + goto cleanup; + + if (cg_freeze_wait(parent, true)) + goto cleanup; + + if (cg_destroy(child)) + goto cleanup; + + if (cg_check_frozen(parent, true)) + goto cleanup; + + if (cg_create(child)) + goto cleanup; + + if (cg_check_frozen(child, true)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (child) + cg_destroy(child); + free(child); + if (parent) + cg_destroy(parent); + free(parent); + return ret; +} + +/* + * The test creates two cgroups: A and B, runs a process in A + * and performs several migrations: + * 1) A (running) -> B (frozen) + * 2) B (frozen) -> A (running) + * 3) A (frozen) -> B (frozen) + * + * On each step it checks the actual state of both cgroups. + */ +static int test_cgfreezer_migrate(const char *root) +{ + int ret = KSFT_FAIL; + char *cgroup[2] = {0}; + int pid; + + cgroup[0] = cg_name(root, "cg_test_migrate_A"); + if (!cgroup[0]) + goto cleanup; + + cgroup[1] = cg_name(root, "cg_test_migrate_B"); + if (!cgroup[1]) + goto cleanup; + + if (cg_create(cgroup[0])) + goto cleanup; + + if (cg_create(cgroup[1])) + goto cleanup; + + pid = cg_run_nowait(cgroup[0], child_fn, NULL); + if (pid < 0) + goto cleanup; + + if (cg_wait_for_proc_count(cgroup[0], 1)) + goto cleanup; + + /* + * Migrate from A (running) to B (frozen) + */ + if (cg_freeze_wait(cgroup[1], true)) + goto cleanup; + + if (cg_enter_and_wait_for_frozen(cgroup[1], pid, true)) + goto cleanup; + + if (cg_check_frozen(cgroup[0], false)) + goto cleanup; + + /* + * Migrate from B (frozen) to A (running) + */ + if (cg_enter_and_wait_for_frozen(cgroup[0], pid, false)) + goto cleanup; + + if (cg_check_frozen(cgroup[1], true)) + goto cleanup; + + /* + * Migrate from A (frozen) to B (frozen) + */ + if (cg_freeze_wait(cgroup[0], true)) + goto cleanup; + + if (cg_enter_and_wait_for_frozen(cgroup[1], pid, true)) + goto cleanup; + + if (cg_check_frozen(cgroup[0], true)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (cgroup[0]) + cg_destroy(cgroup[0]); + free(cgroup[0]); + if (cgroup[1]) + cg_destroy(cgroup[1]); + free(cgroup[1]); + return ret; +} + +/* + * The test checks that ptrace works with a tracing process in a frozen cgroup. + */ +static int test_cgfreezer_ptrace(const char *root) +{ + int ret = KSFT_FAIL; + char *cgroup = NULL; + siginfo_t siginfo; + int pid; + + cgroup = cg_name(root, "cg_test_ptrace"); + if (!cgroup) + goto cleanup; + + if (cg_create(cgroup)) + goto cleanup; + + pid = cg_run_nowait(cgroup, child_fn, NULL); + if (pid < 0) + goto cleanup; + + if (cg_wait_for_proc_count(cgroup, 1)) + goto cleanup; + + if (cg_freeze_wait(cgroup, true)) + goto cleanup; + + if (ptrace(PTRACE_SEIZE, pid, NULL, NULL)) + goto cleanup; + + if (ptrace(PTRACE_INTERRUPT, pid, NULL, NULL)) + goto cleanup; + + waitpid(pid, NULL, 0); + + /* + * Cgroup has to remain frozen, however the test task + * is in traced state. + */ + if (cg_check_frozen(cgroup, true)) + goto cleanup; + + if (ptrace(PTRACE_GETSIGINFO, pid, NULL, &siginfo)) + goto cleanup; + + if (ptrace(PTRACE_DETACH, pid, NULL, NULL)) + goto cleanup; + + if (cg_check_frozen(cgroup, true)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (cgroup) + cg_destroy(cgroup); + free(cgroup); + return ret; +} + +/* + * Check if the process is stopped. + */ +static int proc_check_stopped(int pid) +{ + char buf[PAGE_SIZE]; + int len; + + len = proc_read_text(pid, "stat", buf, sizeof(buf)); + if (len == -1) { + debug("Can't get %d stat\n", pid); + return -1; + } + + if (strstr(buf, "(test_freezer) T ") == NULL) { + debug("Process %d in the unexpected state: %s\n", pid, buf); + return -1; + } + + return 0; +} + +/* + * Test that it's possible to freeze a cgroup with a stopped process. + */ +static int test_cgfreezer_stopped(const char *root) +{ + int pid, ret = KSFT_FAIL; + char *cgroup = NULL; + + cgroup = cg_name(root, "cg_test_stopped"); + if (!cgroup) + goto cleanup; + + if (cg_create(cgroup)) + goto cleanup; + + pid = cg_run_nowait(cgroup, child_fn, NULL); + + if (cg_wait_for_proc_count(cgroup, 1)) + goto cleanup; + + if (kill(pid, SIGSTOP)) + goto cleanup; + + if (cg_check_frozen(cgroup, false)) + goto cleanup; + + if (cg_freeze_wait(cgroup, true)) + goto cleanup; + + if (cg_freeze_wait(cgroup, false)) + goto cleanup; + + if (proc_check_stopped(pid)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (cgroup) + cg_destroy(cgroup); + free(cgroup); + return ret; +} + +/* + * Test that it's possible to freeze a cgroup with a ptraced process. + */ +static int test_cgfreezer_ptraced(const char *root) +{ + int pid, ret = KSFT_FAIL; + char *cgroup = NULL; + siginfo_t siginfo; + + cgroup = cg_name(root, "cg_test_ptraced"); + if (!cgroup) + goto cleanup; + + if (cg_create(cgroup)) + goto cleanup; + + pid = cg_run_nowait(cgroup, child_fn, NULL); + + if (cg_wait_for_proc_count(cgroup, 1)) + goto cleanup; + + if (ptrace(PTRACE_SEIZE, pid, NULL, NULL)) + goto cleanup; + + if (ptrace(PTRACE_INTERRUPT, pid, NULL, NULL)) + goto cleanup; + + waitpid(pid, NULL, 0); + + if (cg_check_frozen(cgroup, false)) + goto cleanup; + + if (cg_freeze_wait(cgroup, true)) + goto cleanup; + + /* + * cg_check_frozen(cgroup, true) will fail here, + * because the task in in the TRACEd state. + */ + if (cg_freeze_wait(cgroup, false)) + goto cleanup; + + if (ptrace(PTRACE_GETSIGINFO, pid, NULL, &siginfo)) + goto cleanup; + + if (ptrace(PTRACE_DETACH, pid, NULL, NULL)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (cgroup) + cg_destroy(cgroup); + free(cgroup); + return ret; +} + +static int vfork_fn(const char *cgroup, void *arg) +{ + int pid = vfork(); + + if (pid == 0) + while (true) + sleep(1); + + return pid; +} + +/* + * Test that it's possible to freeze a cgroup with a process, + * which called vfork() and is waiting for a child. + */ +static int test_cgfreezer_vfork(const char *root) +{ + int ret = KSFT_FAIL; + char *cgroup = NULL; + + cgroup = cg_name(root, "cg_test_vfork"); + if (!cgroup) + goto cleanup; + + if (cg_create(cgroup)) + goto cleanup; + + cg_run_nowait(cgroup, vfork_fn, NULL); + + if (cg_wait_for_proc_count(cgroup, 2)) + goto cleanup; + + if (cg_freeze_wait(cgroup, true)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (cgroup) + cg_destroy(cgroup); + free(cgroup); + return ret; +} + +#define T(x) { x, #x } +struct cgfreezer_test { + int (*fn)(const char *root); + const char *name; +} tests[] = { + T(test_cgfreezer_simple), + T(test_cgfreezer_tree), + T(test_cgfreezer_forkbomb), + T(test_cgfreezer_rmdir), + T(test_cgfreezer_migrate), + T(test_cgfreezer_ptrace), + T(test_cgfreezer_stopped), + T(test_cgfreezer_ptraced), + T(test_cgfreezer_vfork), +}; +#undef T + +int main(int argc, char *argv[]) +{ + char root[PATH_MAX]; + int i, ret = EXIT_SUCCESS; + + if (cg_find_unified_root(root, sizeof(root))) + ksft_exit_skip("cgroup v2 isn't mounted\n"); + for (i = 0; i < ARRAY_SIZE(tests); i++) { + switch (tests[i].fn(root)) { + case KSFT_PASS: + ksft_test_result_pass("%s\n", tests[i].name); + break; + case KSFT_SKIP: + ksft_test_result_skip("%s\n", tests[i].name); + break; + default: + ret = EXIT_FAILURE; + ksft_test_result_fail("%s\n", tests[i].name); + break; + } + } + + return ret; +} diff --git a/tools/testing/selftests/cgroup/test_memcontrol.c b/tools/testing/selftests/cgroup/test_memcontrol.c index 28d321ba311b..6f339882a6ca 100644 --- a/tools/testing/selftests/cgroup/test_memcontrol.c +++ b/tools/testing/selftests/cgroup/test_memcontrol.c @@ -26,7 +26,7 @@ */ static int test_memcg_subtree_control(const char *root) { - char *parent, *child, *parent2, *child2; + char *parent, *child, *parent2 = NULL, *child2 = NULL; int ret = KSFT_FAIL; char buf[PAGE_SIZE]; @@ -34,50 +34,54 @@ static int test_memcg_subtree_control(const char *root) parent = cg_name(root, "memcg_test_0"); child = cg_name(root, "memcg_test_0/memcg_test_1"); if (!parent || !child) - goto cleanup; + goto cleanup_free; if (cg_create(parent)) - goto cleanup; + goto cleanup_free; if (cg_write(parent, "cgroup.subtree_control", "+memory")) - goto cleanup; + goto cleanup_parent; if (cg_create(child)) - goto cleanup; + goto cleanup_parent; if (cg_read_strstr(child, "cgroup.controllers", "memory")) - goto cleanup; + goto cleanup_child; /* Create two nested cgroups without enabling memory controller */ parent2 = cg_name(root, "memcg_test_1"); child2 = cg_name(root, "memcg_test_1/memcg_test_1"); if (!parent2 || !child2) - goto cleanup; + goto cleanup_free2; if (cg_create(parent2)) - goto cleanup; + goto cleanup_free2; if (cg_create(child2)) - goto cleanup; + goto cleanup_parent2; if (cg_read(child2, "cgroup.controllers", buf, sizeof(buf))) - goto cleanup; + goto cleanup_all; if (!cg_read_strstr(child2, "cgroup.controllers", "memory")) - goto cleanup; + goto cleanup_all; ret = KSFT_PASS; -cleanup: - cg_destroy(child); - cg_destroy(parent); - free(parent); - free(child); - +cleanup_all: cg_destroy(child2); +cleanup_parent2: cg_destroy(parent2); +cleanup_free2: free(parent2); free(child2); +cleanup_child: + cg_destroy(child); +cleanup_parent: + cg_destroy(parent); +cleanup_free: + free(parent); + free(child); return ret; } diff --git a/tools/testing/selftests/drivers/.gitignore b/tools/testing/selftests/drivers/.gitignore new file mode 100644 index 000000000000..f6aebcc27b76 --- /dev/null +++ b/tools/testing/selftests/drivers/.gitignore @@ -0,0 +1 @@ +/dma-buf/udmabuf diff --git a/tools/testing/selftests/drivers/dma-buf/Makefile b/tools/testing/selftests/drivers/dma-buf/Makefile index f22c3f7cf612..79cb16b4e01a 100644 --- a/tools/testing/selftests/drivers/dma-buf/Makefile +++ b/tools/testing/selftests/drivers/dma-buf/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -I../../../../../usr/include/ TEST_GEN_PROGS := udmabuf diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh new file mode 100755 index 000000000000..6d1790b5de7a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh @@ -0,0 +1,311 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# A test for strict prioritization of traffic in the switch. Run two streams of +# traffic, each through a different ingress port, one tagged with PCP of 1, the +# other with PCP of 2. Both streams converge at one egress port, where they are +# assigned TC of, respectively, 1 and 2, with strict priority configured between +# them. In H3, we expect to see (almost) exclusively the high-priority traffic. +# +# Please see qos_mc_aware.sh for an explanation of why we use mausezahn and +# counters instead of just running iperf3. +# +# +---------------------------+ +-----------------------------+ +# | H1 | | H2 | +# | $h1.111 + | | + $h2.222 | +# | 192.0.2.33/28 | | | | 192.0.2.65/28 | +# | e-qos-map 0:1 | | | | e-qos-map 0:2 | +# | | | | | | +# | $h1 + | | + $h2 | +# +-----------------|---------+ +---------|-------------------+ +# | | +# +-----------------|-------------------------------------|-------------------+ +# | $swp1 + + $swp2 | +# | >1Gbps | | >1Gbps | +# | +---------------|-----------+ +----------|----------------+ | +# | | $swp1.111 + | | + $swp2.222 | | +# | | BR111 | SW | BR222 | | +# | | $swp3.111 + | | + $swp3.222 | | +# | +---------------|-----------+ +----------|----------------+ | +# | \_____________________________________/ | +# | | | +# | + $swp3 | +# | | 1Gbps bottleneck | +# | | ETS: (up n->tc n for n in 0..7) | +# | | strict priority | +# +------------------------------------|--------------------------------------+ +# | +# +--------------------|--------------------+ +# | + $h3 H3 | +# | / \ | +# | / \ | +# | $h3.111 + + $h3.222 | +# | 192.0.2.34/28 192.0.2.66/28 | +# +-----------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_ets_strict +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +h1_create() +{ + simple_if_init $h1 + mtu_set $h1 10000 + + vlan_create $h1 111 v$h1 192.0.2.33/28 + ip link set dev $h1.111 type vlan egress-qos-map 0:1 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + mtu_restore $h1 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 222 v$h2 192.0.2.65/28 + ip link set dev $h2.222 type vlan egress-qos-map 0:2 +} + +h2_destroy() +{ + vlan_destroy $h2 222 + + mtu_restore $h2 + simple_if_fini $h2 +} + +h3_create() +{ + simple_if_init $h3 + mtu_set $h3 10000 + + vlan_create $h3 111 v$h3 192.0.2.34/28 + vlan_create $h3 222 v$h3 192.0.2.66/28 +} + +h3_destroy() +{ + vlan_destroy $h3 222 + vlan_destroy $h3 111 + + mtu_restore $h3 + simple_if_fini $h3 +} + +switch_create() +{ + ip link set dev $swp1 up + mtu_set $swp1 10000 + + ip link set dev $swp2 up + mtu_set $swp2 10000 + + # prio n -> TC n, strict scheduling + lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:1,2:2,3:3,4:4,5:5,6:6,7:7 + lldptool -T -i $swp3 -V ETS-CFG tsa=$( + )"0:strict,"$( + )"1:strict,"$( + )"2:strict,"$( + )"3:strict,"$( + )"4:strict,"$( + )"5:strict,"$( + )"6:strict,"$( + )"7:strict" + sleep 1 + + ip link set dev $swp3 up + mtu_set $swp3 10000 + ethtool -s $swp3 speed 1000 autoneg off + + vlan_create $swp1 111 + vlan_create $swp2 222 + vlan_create $swp3 111 + vlan_create $swp3 222 + + ip link add name br111 up type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br111 + ip link set dev $swp3.111 master br111 + + ip link add name br222 up type bridge vlan_filtering 0 + ip link set dev $swp2.222 master br222 + ip link set dev $swp3.222 master br222 + + # Make sure that ingress quotas are smaller than egress so that there is + # room for both streams of traffic to be admitted to shared buffer. + devlink_pool_size_thtype_set 0 dynamic 10000000 + devlink_pool_size_thtype_set 4 dynamic 10000000 + + devlink_port_pool_th_set $swp1 0 6 + devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6 + + devlink_port_pool_th_set $swp2 0 6 + devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6 + + devlink_tc_bind_pool_th_set $swp3 1 egress 4 7 + devlink_tc_bind_pool_th_set $swp3 2 egress 4 7 + devlink_port_pool_th_set $swp3 4 7 +} + +switch_destroy() +{ + devlink_port_pool_th_restore $swp3 4 + devlink_tc_bind_pool_th_restore $swp3 2 egress + devlink_tc_bind_pool_th_restore $swp3 1 egress + + devlink_tc_bind_pool_th_restore $swp2 2 ingress + devlink_port_pool_th_restore $swp2 0 + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 0 + + devlink_pool_size_thtype_restore 4 + devlink_pool_size_thtype_restore 0 + + ip link del dev br222 + ip link del dev br111 + + vlan_destroy $swp3 222 + vlan_destroy $swp3 111 + vlan_destroy $swp2 222 + vlan_destroy $swp1 111 + + ethtool -s $swp3 autoneg on + mtu_restore $swp3 + ip link set dev $swp3 down + lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0 + + mtu_restore $swp2 + ip link set dev $swp2 down + + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + h3mac=$(mac_get $h3) + + vrf_prepare + + h1_create + h2_create + h3_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 " from H1" + ping_test $h2 192.0.2.66 " from H2" +} + +rel() +{ + local old=$1; shift + local new=$1; shift + + bc <<< " + scale=2 + ret = 100 * $new / $old + if (ret > 0) { ret } else { 0 } + " +} + +test_ets_strict() +{ + RET=0 + + # Run high-prio traffic on its own. + start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac + local -a rate_2 + rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2")) + check_err $? "Could not get high enough prio-2 ingress rate" + local rate_2_in=${rate_2[0]} + local rate_2_eg=${rate_2[1]} + stop_traffic # $h2.222 + + # Start low-prio stream. + start_traffic $h1.111 192.0.2.33 192.0.2.34 $h3mac + + local -a rate_1 + rate_1=($(measure_rate $swp1 $h3 rx_octets_prio_1 "prio 1")) + check_err $? "Could not get high enough prio-1 ingress rate" + local rate_1_in=${rate_1[0]} + local rate_1_eg=${rate_1[1]} + + # High-prio and low-prio on their own should have about the same + # throughput. + local rel21=$(rel $rate_1_eg $rate_2_eg) + check_err $(bc <<< "$rel21 < 95") + check_err $(bc <<< "$rel21 > 105") + + # Start the high-prio stream--now both streams run. + start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac + rate_3=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2 w/ 1")) + check_err $? "Could not get high enough prio-2 ingress rate with prio-1" + local rate_3_in=${rate_3[0]} + local rate_3_eg=${rate_3[1]} + stop_traffic # $h2.222 + + stop_traffic # $h1.111 + + # High-prio should have about the same throughput whether or not + # low-prio is in the system. + local rel32=$(rel $rate_2_eg $rate_3_eg) + check_err $(bc <<< "$rel32 < 95") + + log_test "strict priority" + echo "Ingress to switch:" + echo " p1 in rate $(humanize $rate_1_in)" + echo " p2 in rate $(humanize $rate_2_in)" + echo " p2 in rate w/ p1 $(humanize $rate_3_in)" + echo "Egress from switch:" + echo " p1 eg rate $(humanize $rate_1_eg)" + echo " p2 eg rate $(humanize $rate_2_eg) ($rel21% of p1)" + echo " p2 eg rate w/ p1 $(humanize $rate_3_eg) ($rel32% of p2)" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh new file mode 100644 index 000000000000..e80be65799ad --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 + +humanize() +{ + local speed=$1; shift + + for unit in bps Kbps Mbps Gbps; do + if (($(echo "$speed < 1024" | bc))); then + break + fi + + speed=$(echo "scale=1; $speed / 1024" | bc) + done + + echo "$speed${unit}" +} + +rate() +{ + local t0=$1; shift + local t1=$1; shift + local interval=$1; shift + + echo $((8 * (t1 - t0) / interval)) +} + +start_traffic() +{ + local h_in=$1; shift # Where the traffic egresses the host + local sip=$1; shift + local dip=$1; shift + local dmac=$1; shift + + $MZ $h_in -p 8000 -A $sip -B $dip -c 0 \ + -a own -b $dmac -t udp -q & + sleep 1 +} + +stop_traffic() +{ + # Suppress noise from killing mausezahn. + { kill %% && wait %%; } 2>/dev/null +} + +check_rate() +{ + local rate=$1; shift + local min=$1; shift + local what=$1; shift + + if ((rate > min)); then + return 0 + fi + + echo "$what $(humanize $ir) < $(humanize $min)" > /dev/stderr + return 1 +} + +measure_rate() +{ + local sw_in=$1; shift # Where the traffic ingresses the switch + local host_in=$1; shift # Where it ingresses another host + local counter=$1; shift # Counter to use for measurement + local what=$1; shift + + local interval=10 + local i + local ret=0 + + # Dips in performance might cause momentary ingress rate to drop below + # 1Gbps. That wouldn't saturate egress and MC would thus get through, + # seemingly winning bandwidth on account of UC. Demand at least 2Gbps + # average ingress rate to somewhat mitigate this. + local min_ingress=2147483648 + + for i in {5..0}; do + local t0=$(ethtool_stats_get $host_in $counter) + local u0=$(ethtool_stats_get $sw_in $counter) + sleep $interval + local t1=$(ethtool_stats_get $host_in $counter) + local u1=$(ethtool_stats_get $sw_in $counter) + + local ir=$(rate $u0 $u1 $interval) + local er=$(rate $t0 $t1 $interval) + + if check_rate $ir $min_ingress "$what ingress rate"; then + break + fi + + # Fail the test if we can't get the throughput. + if ((i == 0)); then + ret=1 + fi + done + + echo $ir $er + return $ret +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh index 117f6f35d72f..71231ad2dbfb 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -67,6 +67,8 @@ lib_dir=$(dirname $0)/../../../net/forwarding NUM_NETIFS=6 source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh h1_create() { @@ -140,10 +142,28 @@ switch_create() ip link set dev br111 up ip link set dev $swp2.111 master br111 ip link set dev $swp3.111 master br111 + + # Make sure that ingress quotas are smaller than egress so that there is + # room for both streams of traffic to be admitted to shared buffer. + devlink_port_pool_th_set $swp1 0 5 + devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5 + + devlink_port_pool_th_set $swp2 0 5 + devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5 + + devlink_port_pool_th_set $swp3 4 12 } switch_destroy() { + devlink_port_pool_th_restore $swp3 4 + + devlink_tc_bind_pool_th_restore $swp2 1 ingress + devlink_port_pool_th_restore $swp2 0 + + devlink_tc_bind_pool_th_restore $swp1 0 ingress + devlink_port_pool_th_restore $swp1 0 + ip link del dev br111 ip link del dev br1 @@ -201,107 +221,28 @@ ping_ipv4() ping_test $h2 192.0.2.130 } -humanize() -{ - local speed=$1; shift - - for unit in bps Kbps Mbps Gbps; do - if (($(echo "$speed < 1024" | bc))); then - break - fi - - speed=$(echo "scale=1; $speed / 1024" | bc) - done - - echo "$speed${unit}" -} - -rate() -{ - local t0=$1; shift - local t1=$1; shift - local interval=$1; shift - - echo $((8 * (t1 - t0) / interval)) -} - -check_rate() -{ - local rate=$1; shift - local min=$1; shift - local what=$1; shift - - if ((rate > min)); then - return 0 - fi - - echo "$what $(humanize $ir) < $(humanize $min_ingress)" > /dev/stderr - return 1 -} - -measure_uc_rate() -{ - local what=$1; shift - - local interval=10 - local i - local ret=0 - - # Dips in performance might cause momentary ingress rate to drop below - # 1Gbps. That wouldn't saturate egress and MC would thus get through, - # seemingly winning bandwidth on account of UC. Demand at least 2Gbps - # average ingress rate to somewhat mitigate this. - local min_ingress=2147483648 - - $MZ $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ - -a own -b $h3mac -t udp -q & - sleep 1 - - for i in {5..0}; do - local t0=$(ethtool_stats_get $h3 rx_octets_prio_1) - local u0=$(ethtool_stats_get $swp2 rx_octets_prio_1) - sleep $interval - local t1=$(ethtool_stats_get $h3 rx_octets_prio_1) - local u1=$(ethtool_stats_get $swp2 rx_octets_prio_1) - - local ir=$(rate $u0 $u1 $interval) - local er=$(rate $t0 $t1 $interval) - - if check_rate $ir $min_ingress "$what ingress rate"; then - break - fi - - # Fail the test if we can't get the throughput. - if ((i == 0)); then - ret=1 - fi - done - - # Suppress noise from killing mausezahn. - { kill %% && wait; } 2>/dev/null - - echo $ir $er - exit $ret -} - test_mc_aware() { RET=0 local -a uc_rate - uc_rate=($(measure_uc_rate "UC-only")) + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC-only")) check_err $? "Could not get high enough UC-only ingress rate" + stop_traffic local ucth1=${uc_rate[1]} - $MZ $h1 -p 8000 -c 0 -a own -b bc -t udp -q & + start_traffic $h1 own bc bc local d0=$(date +%s) local t0=$(ethtool_stats_get $h3 rx_octets_prio_0) local u0=$(ethtool_stats_get $swp1 rx_octets_prio_0) local -a uc_rate_2 - uc_rate_2=($(measure_uc_rate "UC+MC")) + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + uc_rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC+MC")) check_err $? "Could not get high enough UC+MC ingress rate" + stop_traffic local ucth2=${uc_rate_2[1]} local d1=$(date +%s) @@ -319,8 +260,7 @@ test_mc_aware() local mc_ir=$(rate $u0 $u1 $interval) local mc_er=$(rate $t0 $t1 $interval) - # Suppress noise from killing mausezahn. - { kill %% && wait; } 2>/dev/null + stop_traffic log_test "UC performace under MC overload" @@ -344,8 +284,7 @@ test_uc_aware() { RET=0 - $MZ $h2.111 -p 8000 -A 192.0.2.129 -B 192.0.2.130 -c 0 \ - -a own -b $h3mac -t udp -q & + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac local d0=$(date +%s) local t0=$(ethtool_stats_get $h3 rx_octets_prio_1) @@ -375,8 +314,7 @@ test_uc_aware() ((attempts == passes)) check_err $? - # Suppress noise from killing mausezahn. - { kill %% && wait; } 2>/dev/null + stop_traffic log_test "MC performace under UC overload" echo " ingress UC throughput $(humanize ${uc_ir})" diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh index c4cf6e6d800e..1c30f302a1e7 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -11,6 +11,7 @@ lib_dir=$(dirname $0)/../../../net/forwarding ALL_TESTS=" rif_set_addr_test + rif_vrf_set_addr_test rif_inherit_bridge_addr_test rif_non_inherit_bridge_addr_test vlan_interface_deletion_test @@ -26,6 +27,7 @@ ALL_TESTS=" lag_dev_deletion_test vlan_interface_uppers_test bridge_extern_learn_test + neigh_offload_test devlink_reload_test " NUM_NETIFS=2 @@ -98,6 +100,25 @@ rif_set_addr_test() ip link set dev $swp1 addr $swp1_mac } +rif_vrf_set_addr_test() +{ + # Test that it is possible to set an IP address on a VRF upper despite + # its random MAC address. + RET=0 + + ip link add name vrf-test type vrf table 10 + ip link set dev $swp1 master vrf-test + + ip -4 address add 192.0.2.1/24 dev vrf-test + check_err $? "failed to set IPv4 address on VRF" + ip -6 address add 2001:db8:1::1/64 dev vrf-test + check_err $? "failed to set IPv6 address on VRF" + + log_test "RIF - setting IP address on VRF" + + ip link del dev vrf-test +} + rif_inherit_bridge_addr_test() { RET=0 @@ -561,6 +582,31 @@ bridge_extern_learn_test() ip link del dev br0 } +neigh_offload_test() +{ + # Test that IPv4 and IPv6 neighbour entries are marked as offloaded + RET=0 + + ip -4 address add 192.0.2.1/24 dev $swp1 + ip -6 address add 2001:db8:1::1/64 dev $swp1 + + ip -4 neigh add 192.0.2.2 lladdr de:ad:be:ef:13:37 nud perm dev $swp1 + ip -6 neigh add 2001:db8:1::2 lladdr de:ad:be:ef:13:37 nud perm \ + dev $swp1 + + ip -4 neigh show dev $swp1 | grep 192.0.2.2 | grep -q offload + check_err $? "ipv4 neigh entry not marked as offloaded when should" + ip -6 neigh show dev $swp1 | grep 2001:db8:1::2 | grep -q offload + check_err $? "ipv6 neigh entry not marked as offloaded when should" + + log_test "neighbour offload indication" + + ip -6 neigh del 2001:db8:1::2 dev $swp1 + ip -4 neigh del 192.0.2.2 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + ip -4 address del 192.0.2.1/24 dev $swp1 +} + devlink_reload_test() { # Test that after executing all the above configuration tests, a diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh index a372b2f60874..fb850e0ec837 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -12,6 +12,7 @@ ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ delta_two_masks_one_key_test delta_simple_rehash_test \ bloom_simple_test bloom_complex_test bloom_delta_test" NUM_NETIFS=2 +source $lib_dir/lib.sh source $lib_dir/tc_common.sh source $lib_dir/devlink_lib.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh index b1fe960e398a..6f2683cbc7d5 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh @@ -1,7 +1,10 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +lib_dir=$(dirname $0)/../../../../net/forwarding + NUM_NETIFS=1 +source $lib_dir/lib.sh source devlink_lib_spectrum.sh setup_prepare() diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh index e7ffc79561b7..43ba1b438f6d 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -1,8 +1,11 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +lib_dir=$(dirname $0)/../../../../net/forwarding + NUM_NETIFS=6 -source ../../../../net/forwarding/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/tc_common.sh source devlink_lib_spectrum.sh current_test="" diff --git a/tools/testing/selftests/efivarfs/Makefile b/tools/testing/selftests/efivarfs/Makefile index c49dcea69319..e3181338ba5e 100644 --- a/tools/testing/selftests/efivarfs/Makefile +++ b/tools/testing/selftests/efivarfs/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS = -Wall TEST_GEN_FILES := open-unlink create-read diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh index a47029a799d2..a90f394f9aa9 100755 --- a/tools/testing/selftests/efivarfs/efivarfs.sh +++ b/tools/testing/selftests/efivarfs/efivarfs.sh @@ -7,6 +7,12 @@ test_guid=210be57c-9849-4fc7-a635-e6382d1aec27 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +file_cleanup() +{ + chattr -i $1 + rm -f $1 +} + check_prereqs() { local msg="skip all tests:" @@ -58,8 +64,10 @@ test_create() if [ $(stat -c %s $file) -ne 5 ]; then echo "$file has invalid size" >&2 + file_cleanup $file exit 1 fi + file_cleanup $file } test_create_empty() @@ -72,12 +80,14 @@ test_create_empty() echo "$file can not be created without writing" >&2 exit 1 fi + file_cleanup $file } test_create_read() { local file=$efivarfs_mount/$FUNCNAME-$test_guid ./create-read $file + file_cleanup $file } test_delete() @@ -92,11 +102,7 @@ test_delete() exit 1 fi - rm $file 2>/dev/null - if [ $? -ne 0 ]; then - chattr -i $file - rm $file - fi + file_cleanup $file if [ -e $file ]; then echo "$file couldn't be deleted" >&2 @@ -150,11 +156,7 @@ test_valid_filenames() echo "$file could not be created" >&2 ret=1 else - rm $file 2>/dev/null - if [ $? -ne 0 ]; then - chattr -i $file - rm $file - fi + file_cleanup $file fi done @@ -187,11 +189,7 @@ test_invalid_filenames() if [ -e $file ]; then echo "Creating $file should have failed" >&2 - rm $file 2>/dev/null - if [ $? -ne 0 ]; then - chattr -i $file - rm $file - fi + file_cleanup $file ret=1 fi done diff --git a/tools/testing/selftests/exec/.gitignore b/tools/testing/selftests/exec/.gitignore index 64073e050c6a..b02279da6fa1 100644 --- a/tools/testing/selftests/exec/.gitignore +++ b/tools/testing/selftests/exec/.gitignore @@ -6,4 +6,5 @@ execveat.moved execveat.path.ephemeral execveat.ephemeral execveat.denatured -xxxxxxxx*
\ No newline at end of file +/recursion-depth +xxxxxxxx* diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index 427c41ba5151..33339e31e365 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -1,11 +1,15 @@ # SPDX-License-Identifier: GPL-2.0 CFLAGS = -Wall +CFLAGS += -Wno-nonnull +CFLAGS += -D_GNU_SOURCE TEST_GEN_PROGS := execveat TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir # Makefile is a run-time dependency, since it's accessed by the execveat test TEST_FILES := Makefile +TEST_GEN_PROGS += recursion-depth + EXTRA_CLEAN := $(OUTPUT)/subdir.moved $(OUTPUT)/execveat.moved $(OUTPUT)/xxxxx* include ../lib.mk diff --git a/tools/testing/selftests/exec/recursion-depth.c b/tools/testing/selftests/exec/recursion-depth.c new file mode 100644 index 000000000000..2dbd5bc45b3e --- /dev/null +++ b/tools/testing/selftests/exec/recursion-depth.c @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2019 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +/* Test that pointing #! script interpreter to self doesn't recurse. */ +#include <errno.h> +#include <sched.h> +#include <stdio.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <sys/mount.h> +#include <unistd.h> + +int main(void) +{ + if (unshare(CLONE_NEWNS) == -1) { + if (errno == ENOSYS || errno == EPERM) { + fprintf(stderr, "error: unshare, errno %d\n", errno); + return 4; + } + fprintf(stderr, "error: unshare, errno %d\n", errno); + return 1; + } + if (mount(NULL, "/", NULL, MS_PRIVATE|MS_REC, NULL) == -1) { + fprintf(stderr, "error: mount '/', errno %d\n", errno); + return 1; + } + /* Require "exec" filesystem. */ + if (mount(NULL, "/tmp", "ramfs", 0, NULL) == -1) { + fprintf(stderr, "error: mount ramfs, errno %d\n", errno); + return 1; + } + +#define FILENAME "/tmp/1" + + int fd = creat(FILENAME, 0700); + if (fd == -1) { + fprintf(stderr, "error: creat, errno %d\n", errno); + return 1; + } +#define S "#!" FILENAME "\n" + if (write(fd, S, strlen(S)) != strlen(S)) { + fprintf(stderr, "error: write, errno %d\n", errno); + return 1; + } + close(fd); + + int rv = execve(FILENAME, NULL, NULL); + if (rv == -1 && errno == ELOOP) { + return 0; + } + fprintf(stderr, "error: execve, rv %d, errno %d\n", rv, errno); + return 1; +} diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile index 261c81f08606..012b2cf69c11 100644 --- a/tools/testing/selftests/firmware/Makefile +++ b/tools/testing/selftests/firmware/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Makefile for firmware loading selftests # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/tracing-error-log.tc b/tools/testing/selftests/ftrace/test.d/ftrace/tracing-error-log.tc new file mode 100644 index 000000000000..021c03fd885d --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/ftrace/tracing-error-log.tc @@ -0,0 +1,19 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - test tracing error log support + +fail() { #msg + echo $1 + exit_fail +} + +# event tracing is currently the only ftrace tracer that uses the +# tracing error_log, hence this check +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +ftrace_errlog_check 'event filter parse error' '((sig >= 10 && sig < 15) || dsig ^== 17) && comm != bash' 'events/signal/signal_generate/filter' + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 7b96e80e6b8a..779ec11f61bd 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -109,3 +109,15 @@ LOCALHOST=127.0.0.1 yield() { ping $LOCALHOST -c 1 || sleep .001 || usleep 1 || sleep 1 } + +ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file + pos=$(echo -n "${2%^*}" | wc -c) # error position + command=$(echo "$2" | tr -d ^) + echo "Test command: $command" + echo > error_log + (! echo "$command" > "$3" ) 2> /dev/null + grep "$1: error:" -A 3 error_log + N=$(tail -n 1 error_log | wc -c) + # " Command: " and "^\n" => 13 + test $(expr 13 + $pos) -eq $N +} diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc new file mode 100644 index 000000000000..29faaec942c6 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -0,0 +1,85 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Kprobe event parser error log check + +[ -f kprobe_events ] || exit_unsupported # this is configurable + +[ -f error_log ] || exit_unsupported + +check_error() { # command-with-error-pos-by-^ + ftrace_errlog_check 'trace_kprobe' "$1" 'kprobe_events' +} + +if grep -q 'r\[maxactive\]' README; then +check_error 'p^100 vfs_read' # MAXACT_NO_KPROBE +check_error 'r^1a111 vfs_read' # BAD_MAXACT +check_error 'r^100000 vfs_read' # MAXACT_TOO_BIG +fi + +check_error 'p ^non_exist_func' # BAD_PROBE_ADDR (enoent) +check_error 'p ^hoge-fuga' # BAD_PROBE_ADDR (bad syntax) +check_error 'p ^hoge+1000-1000' # BAD_PROBE_ADDR (bad syntax) +check_error 'r ^vfs_read+10' # BAD_RETPROBE +check_error 'p:^/bar vfs_read' # NO_GROUP_NAME +check_error 'p:^12345678901234567890123456789012345678901234567890123456789012345/bar vfs_read' # GROUP_TOO_LONG + +check_error 'p:^foo.1/bar vfs_read' # BAD_GROUP_NAME +check_error 'p:foo/^ vfs_read' # NO_EVENT_NAME +check_error 'p:foo/^12345678901234567890123456789012345678901234567890123456789012345 vfs_read' # EVENT_TOO_LONG +check_error 'p:foo/^bar.1 vfs_read' # BAD_EVENT_NAME + +check_error 'p vfs_read ^$retval' # RETVAL_ON_PROBE +check_error 'p vfs_read ^$stack10000' # BAD_STACK_NUM + +if grep -q '$arg<N>' README; then +check_error 'p vfs_read ^$arg10000' # BAD_ARG_NUM +fi + +check_error 'p vfs_read ^$none_var' # BAD_VAR + +check_error 'p vfs_read ^%none_reg' # BAD_REG_NAME +check_error 'p vfs_read ^@12345678abcde' # BAD_MEM_ADDR +check_error 'p vfs_read ^@+10' # FILE_ON_KPROBE + +check_error 'p vfs_read ^+0@0)' # DEREF_NEED_BRACE +check_error 'p vfs_read ^+0ab1(@0)' # BAD_DEREF_OFFS +check_error 'p vfs_read +0(+0(@0^)' # DEREF_OPEN_BRACE + +if grep -A1 "fetcharg:" README | grep -q '\$comm' ; then +check_error 'p vfs_read +0(^$comm)' # COMM_CANT_DEREF +fi + +check_error 'p vfs_read ^&1' # BAD_FETCH_ARG + + +# We've introduced this limitation with array support +if grep -q ' <type>\\\[<array-size>\\\]' README; then +check_error 'p vfs_read +0(^+0(+0(+0(+0(+0(+0(+0(+0(+0(+0(+0(+0(+0(@0))))))))))))))' # TOO_MANY_OPS? +check_error 'p vfs_read +0(@11):u8[10^' # ARRAY_NO_CLOSE +check_error 'p vfs_read +0(@11):u8[10]^a' # BAD_ARRAY_SUFFIX +check_error 'p vfs_read +0(@11):u8[^10a]' # BAD_ARRAY_NUM +check_error 'p vfs_read +0(@11):u8[^256]' # ARRAY_TOO_BIG +fi + +check_error 'p vfs_read @11:^unknown_type' # BAD_TYPE +check_error 'p vfs_read $stack0:^string' # BAD_STRING +check_error 'p vfs_read @11:^b10@a/16' # BAD_BITFIELD + +check_error 'p vfs_read ^arg123456789012345678901234567890=@11' # ARG_NAME_TOO_LOG +check_error 'p vfs_read ^=@11' # NO_ARG_NAME +check_error 'p vfs_read ^var.1=@11' # BAD_ARG_NAME +check_error 'p vfs_read var1=@11 ^var1=@12' # USED_ARG_NAME +check_error 'p vfs_read ^+1234567(+1234567(+1234567(+1234567(+1234567(+1234567(@1234))))))' # ARG_TOO_LONG +check_error 'p vfs_read arg1=^' # NO_ARG_BODY + +# instruction boundary check is valid on x86 (at this moment) +case $(uname -m) in + x86_64|i[3456]86) + echo 'p vfs_read' > kprobe_events + if grep -q FTRACE ../kprobes/list ; then + check_error 'p ^vfs_read+3' # BAD_INSN_BNDRY (only if function-tracer is enabled) + fi + ;; +esac + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/uprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/uprobe_syntax_errors.tc new file mode 100644 index 000000000000..14229d5778a0 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/kprobe/uprobe_syntax_errors.tc @@ -0,0 +1,23 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Uprobe event parser error log check + +[ -f uprobe_events ] || exit_unsupported # this is configurable + +[ -f error_log ] || exit_unsupported + +check_error() { # command-with-error-pos-by-^ + ftrace_errlog_check 'trace_uprobe' "$1" 'uprobe_events' +} + +check_error 'p ^/non_exist_file:100' # FILE_NOT_FOUND +check_error 'p ^/sys:100' # NO_REGULAR_FILE +check_error 'p /bin/sh:^10a' # BAD_UPROBE_OFFS +check_error 'p /bin/sh:10(^1a)' # BAD_REFCNT +check_error 'p /bin/sh:10(10^' # REFCNT_OPEN_BRACE +check_error 'p /bin/sh:10(10)^a' # BAD_REFCNT_SUFFIX + +check_error 'p /bin/sh:10 ^@+ab' # BAD_FILE_OFFS +check_error 'p /bin/sh:10 ^@symbol' # SYM_ON_UPROBE + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc deleted file mode 100644 index 9912616a8672..000000000000 --- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 -# description: event trigger - test extended error support - - -fail() { #msg - echo $1 - exit_fail -} - -if [ ! -f set_event ]; then - echo "event tracing is not supported" - exit_unsupported -fi - -if [ ! -f synthetic_events ]; then - echo "synthetic event is not supported" - exit_unsupported -fi - -echo "Test extended error support" -echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger -! echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_wakeup/trigger 2> /dev/null -if ! grep -q "ERROR:" events/sched/sched_wakeup/hist; then - fail "Failed to generate extended error in histogram" -fi - -exit 0 diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi.c b/tools/testing/selftests/futex/functional/futex_requeue_pi.c index 54cd5c414e82..8d20957f7586 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi.c @@ -395,6 +395,7 @@ int main(int argc, char *argv[]) } ksft_print_header(); + ksft_set_plan(1); ksft_print_msg("%s: Test requeue functionality\n", basename(argv[0])); ksft_print_msg( "\tArguments: broadcast=%d locked=%d owner=%d timeout=%ldns\n", diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c b/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c index 08187a16507f..742624c59ba7 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi_mismatched_ops.c @@ -79,6 +79,7 @@ int main(int argc, char *argv[]) } ksft_print_header(); + ksft_set_plan(1); ksft_print_msg("%s: Detect mismatched requeue_pi operations\n", basename(argv[0])); diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c index f0542a344d95..a0f5934707ff 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c @@ -144,6 +144,7 @@ int main(int argc, char *argv[]) } ksft_print_header(); + ksft_set_plan(1); ksft_print_msg("%s: Test signal handling during requeue_pi\n", basename(argv[0])); ksft_print_msg("\tArguments: <none>\n"); diff --git a/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c b/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c index 6216de828093..a458d42ff86e 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c +++ b/tools/testing/selftests/futex/functional/futex_wait_private_mapped_file.c @@ -98,6 +98,7 @@ int main(int argc, char **argv) } ksft_print_header(); + ksft_set_plan(1); ksft_print_msg( "%s: Test the futex value of private file mappings in FUTEX_WAIT\n", basename(argv[0])); diff --git a/tools/testing/selftests/futex/functional/futex_wait_timeout.c b/tools/testing/selftests/futex/functional/futex_wait_timeout.c index bab3dfe1787f..04b95478059c 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_timeout.c +++ b/tools/testing/selftests/futex/functional/futex_wait_timeout.c @@ -69,6 +69,7 @@ int main(int argc, char *argv[]) } ksft_print_header(); + ksft_set_plan(1); ksft_print_msg("%s: Block on a futex and wait for timeout\n", basename(argv[0])); ksft_print_msg("\tArguments: timeout=%ldns\n", timeout_ns); diff --git a/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c b/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c index 26975322545b..3a1d12a14921 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c +++ b/tools/testing/selftests/futex/functional/futex_wait_uninitialized_heap.c @@ -100,6 +100,7 @@ int main(int argc, char **argv) } ksft_print_header(); + ksft_set_plan(1); ksft_print_msg("%s: Test the uninitialized futex value in FUTEX_WAIT\n", basename(argv[0])); diff --git a/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c b/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c index da15a63269b4..a34a6bbc30ce 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c +++ b/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c @@ -65,6 +65,7 @@ int main(int argc, char *argv[]) } ksft_print_header(); + ksft_set_plan(1); ksft_print_msg("%s: Test the unexpected futex value in FUTEX_WAIT\n", basename(argv[0])); diff --git a/tools/testing/selftests/gpio/gpio-mockup-chardev.c b/tools/testing/selftests/gpio/gpio-mockup-chardev.c index aaa1e9f083c3..d587c814a9ca 100644 --- a/tools/testing/selftests/gpio/gpio-mockup-chardev.c +++ b/tools/testing/selftests/gpio/gpio-mockup-chardev.c @@ -12,7 +12,6 @@ #include <unistd.h> #include <stdio.h> #include <stdlib.h> -#include <stdio.h> #include <errno.h> #include <string.h> #include <fcntl.h> diff --git a/tools/testing/selftests/ima/config b/tools/testing/selftests/ima/config deleted file mode 100644 index 6bc86d4d9bb4..000000000000 --- a/tools/testing/selftests/ima/config +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_IMA_APPRAISE -CONFIG_IMA_ARCH_POLICY -CONFIG_SECURITYFS -CONFIG_KEXEC_VERIFY_SIG diff --git a/tools/testing/selftests/ima/test_kexec_load.sh b/tools/testing/selftests/ima/test_kexec_load.sh deleted file mode 100755 index 1c10093fb526..000000000000 --- a/tools/testing/selftests/ima/test_kexec_load.sh +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0+ -# Loading a kernel image via the kexec_load syscall should fail -# when the kerne is CONFIG_KEXEC_VERIFY_SIG enabled and the system -# is booted in secureboot mode. - -TEST="$0" -EFIVARFS="/sys/firmware/efi/efivars" -rc=0 - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - -# kexec requires root privileges -if [ $UID != 0 ]; then - echo "$TEST: must be run as root" >&2 - exit $ksft_skip -fi - -# Make sure that efivars is mounted in the normal location -if ! grep -q "^\S\+ $EFIVARFS efivarfs" /proc/mounts; then - echo "$TEST: efivars is not mounted on $EFIVARFS" >&2 - exit $ksft_skip -fi - -# Get secureboot mode -file="$EFIVARFS/SecureBoot-*" -if [ ! -e $file ]; then - echo "$TEST: unknown secureboot mode" >&2 - exit $ksft_skip -fi -secureboot=`hexdump $file | awk '{print substr($4,length($4),1)}'` - -# kexec_load should fail in secure boot mode -KERNEL_IMAGE="/boot/vmlinuz-`uname -r`" -kexec -l $KERNEL_IMAGE &>> /dev/null -if [ $? == 0 ]; then - kexec -u - if [ "$secureboot" == "1" ]; then - echo "$TEST: kexec_load succeeded [FAIL]" - rc=1 - else - echo "$TEST: kexec_load succeeded [PASS]" - fi -else - if [ "$secureboot" == "1" ]; then - echo "$TEST: kexec_load failed [PASS]" - else - echo "$TEST: kexec_load failed [FAIL]" - rc=1 - fi -fi - -exit $rc diff --git a/tools/testing/selftests/ipc/msgque.c b/tools/testing/selftests/ipc/msgque.c index dac927e82336..4c156aeab6b8 100644 --- a/tools/testing/selftests/ipc/msgque.c +++ b/tools/testing/selftests/ipc/msgque.c @@ -1,9 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 +#define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> #include <string.h> #include <errno.h> -#include <linux/msg.h> +#include <sys/msg.h> #include <fcntl.h> #include "../kselftest.h" @@ -73,7 +74,7 @@ int restore_queue(struct msgque_data *msgque) return 0; destroy: - if (msgctl(id, IPC_RMID, 0)) + if (msgctl(id, IPC_RMID, NULL)) printf("Failed to destroy queue: %d\n", -errno); return ret; } @@ -120,7 +121,7 @@ int check_and_destroy_queue(struct msgque_data *msgque) ret = 0; err: - if (msgctl(msgque->msq_id, IPC_RMID, 0)) { + if (msgctl(msgque->msq_id, IPC_RMID, NULL)) { printf("Failed to destroy queue: %d\n", -errno); return -errno; } @@ -129,7 +130,7 @@ err: int dump_queue(struct msgque_data *msgque) { - struct msqid64_ds ds; + struct msqid_ds ds; int kern_id; int i, ret; @@ -245,7 +246,7 @@ int main(int argc, char **argv) return ksft_exit_pass(); err_destroy: - if (msgctl(msgque.msq_id, IPC_RMID, 0)) { + if (msgctl(msgque.msq_id, IPC_RMID, NULL)) { printf("Failed to destroy queue: %d\n", -errno); return ksft_exit_fail(); } diff --git a/tools/testing/selftests/kcmp/Makefile b/tools/testing/selftests/kcmp/Makefile index 47aa9887f9d4..b4d39f6b5124 100644 --- a/tools/testing/selftests/kcmp/Makefile +++ b/tools/testing/selftests/kcmp/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -I../../../../usr/include/ TEST_GEN_PROGS := kcmp_test diff --git a/tools/testing/selftests/ima/Makefile b/tools/testing/selftests/kexec/Makefile index 0b3adf5444b6..aa91d2063249 100644 --- a/tools/testing/selftests/ima/Makefile +++ b/tools/testing/selftests/kexec/Makefile @@ -1,10 +1,12 @@ -# Makefile for kexec_load +# SPDX-License-Identifier: GPL-2.0-only +# Makefile for kexec tests uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) ifeq ($(ARCH),x86) -TEST_PROGS := test_kexec_load.sh +TEST_PROGS := test_kexec_load.sh test_kexec_file_load.sh +TEST_FILES := kexec_common_lib.sh include ../lib.mk diff --git a/tools/testing/selftests/kexec/config b/tools/testing/selftests/kexec/config new file mode 100644 index 000000000000..8962e862b2b8 --- /dev/null +++ b/tools/testing/selftests/kexec/config @@ -0,0 +1,3 @@ +CONFIG_IMA_APPRAISE=y +CONFIG_IMA_ARCH_POLICY=y +CONFIG_SECURITYFS=y diff --git a/tools/testing/selftests/kexec/kexec_common_lib.sh b/tools/testing/selftests/kexec/kexec_common_lib.sh new file mode 100755 index 000000000000..43017cfe88f7 --- /dev/null +++ b/tools/testing/selftests/kexec/kexec_common_lib.sh @@ -0,0 +1,220 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Kselftest framework defines: ksft_pass=0, ksft_fail=1, ksft_skip=4 + +VERBOSE="${VERBOSE:-1}" +IKCONFIG="/tmp/config-`uname -r`" +KERNEL_IMAGE="/boot/vmlinuz-`uname -r`" +SECURITYFS=$(grep "securityfs" /proc/mounts | awk '{print $2}') + +log_info() +{ + [ $VERBOSE -ne 0 ] && echo "[INFO] $1" +} + +# The ksefltest framework requirement returns 0 for PASS. +log_pass() +{ + [ $VERBOSE -ne 0 ] && echo "$1 [PASS]" + exit 0 +} + +# The ksefltest framework requirement returns 1 for FAIL. +log_fail() +{ + [ $VERBOSE -ne 0 ] && echo "$1 [FAIL]" + exit 1 +} + +# The ksefltest framework requirement returns 4 for SKIP. +log_skip() +{ + [ $VERBOSE -ne 0 ] && echo "$1" + exit 4 +} + +# Check efivar SecureBoot-$(the UUID) and SetupMode-$(the UUID). +# (Based on kdump-lib.sh) +get_efivarfs_secureboot_mode() +{ + local efivarfs="/sys/firmware/efi/efivars" + local secure_boot_file="" + local setup_mode_file="" + local secureboot_mode=0 + local setup_mode=0 + + # Make sure that efivar_fs is mounted in the normal location + if ! grep -q "^\S\+ $efivarfs efivarfs" /proc/mounts; then + log_info "efivars is not mounted on $efivarfs" + return 0; + fi + secure_boot_file=$(find "$efivarfs" -name SecureBoot-* 2>/dev/null) + setup_mode_file=$(find "$efivarfs" -name SetupMode-* 2>/dev/null) + if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then + secureboot_mode=$(hexdump -v -e '/1 "%d\ "' \ + "$secure_boot_file"|cut -d' ' -f 5) + setup_mode=$(hexdump -v -e '/1 "%d\ "' \ + "$setup_mode_file"|cut -d' ' -f 5) + + if [ $secureboot_mode -eq 1 ] && [ $setup_mode -eq 0 ]; then + log_info "secure boot mode enabled (CONFIG_EFIVAR_FS)" + return 1; + fi + fi + return 0; +} + +get_efi_var_secureboot_mode() +{ + local efi_vars + local secure_boot_file + local setup_mode_file + local secureboot_mode + local setup_mode + + if [ ! -d "$efi_vars" ]; then + log_skip "efi_vars is not enabled\n" + fi + secure_boot_file=$(find "$efi_vars" -name SecureBoot-* 2>/dev/null) + setup_mode_file=$(find "$efi_vars" -name SetupMode-* 2>/dev/null) + if [ -f "$secure_boot_file/data" ] && \ + [ -f "$setup_mode_file/data" ]; then + secureboot_mode=`od -An -t u1 "$secure_boot_file/data"` + setup_mode=`od -An -t u1 "$setup_mode_file/data"` + + if [ $secureboot_mode -eq 1 ] && [ $setup_mode -eq 0 ]; then + log_info "secure boot mode enabled (CONFIG_EFI_VARS)" + return 1; + fi + fi + return 0; +} + +# Check efivar SecureBoot-$(the UUID) and SetupMode-$(the UUID). +# The secure boot mode can be accessed either as the last integer +# of "od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-*" or from +# "od -An -t u1 /sys/firmware/efi/vars/SecureBoot-*/data". The efi +# SetupMode can be similarly accessed. +# Return 1 for SecureBoot mode enabled and SetupMode mode disabled. +get_secureboot_mode() +{ + local secureboot_mode=0 + + get_efivarfs_secureboot_mode + secureboot_mode=$? + + # fallback to using the efi_var files + if [ $secureboot_mode -eq 0 ]; then + get_efi_var_secureboot_mode + secureboot_mode=$? + fi + + if [ $secureboot_mode -eq 0 ]; then + log_info "secure boot mode not enabled" + fi + return $secureboot_mode; +} + +require_root_privileges() +{ + if [ $(id -ru) -ne 0 ]; then + log_skip "requires root privileges" + fi +} + +# Look for config option in Kconfig file. +# Return 1 for found and 0 for not found. +kconfig_enabled() +{ + local config="$1" + local msg="$2" + + grep -E -q $config $IKCONFIG + if [ $? -eq 0 ]; then + log_info "$msg" + return 1 + fi + return 0 +} + +# Attempt to get the kernel config first via proc, and then by +# extracting it from the kernel image or the configs.ko using +# scripts/extract-ikconfig. +# Return 1 for found. +get_kconfig() +{ + local proc_config="/proc/config.gz" + local module_dir="/lib/modules/`uname -r`" + local configs_module="$module_dir/kernel/kernel/configs.ko" + + if [ ! -f $proc_config ]; then + modprobe configs > /dev/null 2>&1 + fi + if [ -f $proc_config ]; then + cat $proc_config | gunzip > $IKCONFIG 2>/dev/null + if [ $? -eq 0 ]; then + return 1 + fi + fi + + local extract_ikconfig="$module_dir/source/scripts/extract-ikconfig" + if [ ! -f $extract_ikconfig ]; then + log_skip "extract-ikconfig not found" + fi + + $extract_ikconfig $KERNEL_IMAGE > $IKCONFIG 2>/dev/null + if [ $? -eq 1 ]; then + if [ ! -f $configs_module ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + $extract_ikconfig $configs_module > $IKCONFIG + if [ $? -eq 1 ]; then + log_skip "CONFIG_IKCONFIG not enabled" + fi + fi + return 1 +} + +# Make sure that securityfs is mounted +mount_securityfs() +{ + if [ -z $SECURITYFS ]; then + SECURITYFS=/sys/kernel/security + mount -t securityfs security $SECURITYFS + fi + + if [ ! -d "$SECURITYFS" ]; then + log_fail "$SECURITYFS :securityfs is not mounted" + fi +} + +# The policy rule format is an "action" followed by key-value pairs. This +# function supports up to two key-value pairs, in any order. +# For example: action func=<keyword> [appraise_type=<type>] +# Return 1 for found and 0 for not found. +check_ima_policy() +{ + local action="$1" + local keypair1="$2" + local keypair2="$3" + local ret=0 + + mount_securityfs + + local ima_policy=$SECURITYFS/ima/policy + if [ ! -e $ima_policy ]; then + log_fail "$ima_policy not found" + fi + + if [ -n $keypair2 ]; then + grep -e "^$action.*$keypair1" "$ima_policy" | \ + grep -q -e "$keypair2" + else + grep -q -e "^$action.*$keypair1" "$ima_policy" + fi + + # invert "grep -q" result, returning 1 for found. + [ $? -eq 0 ] && ret=1 + return $ret +} diff --git a/tools/testing/selftests/kexec/test_kexec_file_load.sh b/tools/testing/selftests/kexec/test_kexec_file_load.sh new file mode 100755 index 000000000000..fa7c24e8eefb --- /dev/null +++ b/tools/testing/selftests/kexec/test_kexec_file_load.sh @@ -0,0 +1,208 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Loading a kernel image via the kexec_file_load syscall can verify either +# the IMA signature stored in the security.ima xattr or the PE signature, +# both signatures depending on the IMA policy, or none. +# +# To determine whether the kernel image is signed, this test depends +# on pesign and getfattr. This test also requires the kernel to be +# built with CONFIG_IKCONFIG enabled and either CONFIG_IKCONFIG_PROC +# enabled or access to the extract-ikconfig script. + +TEST="KEXEC_FILE_LOAD" +. ./kexec_common_lib.sh + +trap "{ rm -f $IKCONFIG ; }" EXIT + +# Some of the IMA builtin policies may require the kexec kernel image to +# be signed, but these policy rules may be replaced with a custom +# policy. Only CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS persists after +# loading a custom policy. Check if it is enabled, before reading the +# IMA runtime sysfs policy file. +# Return 1 for IMA signature required and 0 for not required. +is_ima_sig_required() +{ + local ret=0 + + kconfig_enabled "CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y" \ + "IMA kernel image signature required" + if [ $? -eq 1 ]; then + log_info "IMA signature required" + return 1 + fi + + # The architecture specific or a custom policy may require the + # kexec kernel image be signed. Policy rules are walked + # sequentially. As a result, a policy rule may be defined, but + # might not necessarily be used. This test assumes if a policy + # rule is specified, that is the intent. + if [ $ima_read_policy -eq 1 ]; then + check_ima_policy "appraise" "func=KEXEC_KERNEL_CHECK" \ + "appraise_type=imasig" + ret=$? + [ $ret -eq 1 ] && log_info "IMA signature required"; + fi + return $ret +} + +# The kexec_file_load_test() is complicated enough, require pesign. +# Return 1 for PE signature found and 0 for not found. +check_for_pesig() +{ + which pesign > /dev/null 2>&1 || log_skip "pesign not found" + + pesign -i $KERNEL_IMAGE --show-signature | grep -q "No signatures" + local ret=$? + if [ $ret -eq 1 ]; then + log_info "kexec kernel image PE signed" + else + log_info "kexec kernel image not PE signed" + fi + return $ret +} + +# The kexec_file_load_test() is complicated enough, require getfattr. +# Return 1 for IMA signature found and 0 for not found. +check_for_imasig() +{ + local ret=0 + + which getfattr > /dev/null 2>&1 + if [ $? -eq 1 ]; then + log_skip "getfattr not found" + fi + + line=$(getfattr -n security.ima -e hex --absolute-names $KERNEL_IMAGE 2>&1) + echo $line | grep -q "security.ima=0x03" + if [ $? -eq 0 ]; then + ret=1 + log_info "kexec kernel image IMA signed" + else + log_info "kexec kernel image not IMA signed" + fi + return $ret +} + +kexec_file_load_test() +{ + local succeed_msg="kexec_file_load succeeded" + local failed_msg="kexec_file_load failed" + local key_msg="try enabling the CONFIG_INTEGRITY_PLATFORM_KEYRING" + + line=$(kexec --load --kexec-file-syscall $KERNEL_IMAGE 2>&1) + + if [ $? -eq 0 ]; then + kexec --unload --kexec-file-syscall + + # In secureboot mode with an architecture specific + # policy, make sure either an IMA or PE signature exists. + if [ $secureboot -eq 1 ] && [ $arch_policy -eq 1 ] && \ + [ $ima_signed -eq 0 ] && [ $pe_signed -eq 0 ]; then + log_fail "$succeed_msg (missing sig)" + fi + + if [ $kexec_sig_required -eq 1 -o $pe_sig_required -eq 1 ] \ + && [ $pe_signed -eq 0 ]; then + log_fail "$succeed_msg (missing PE sig)" + fi + + if [ $ima_sig_required -eq 1 ] && [ $ima_signed -eq 0 ]; then + log_fail "$succeed_msg (missing IMA sig)" + fi + + if [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 1 ] \ + && [ $ima_sig_required -eq 0 ] && [ $ima_signed -eq 0 ] \ + && [ $ima_read_policy -eq 0 ]; then + log_fail "$succeed_msg (possibly missing IMA sig)" + fi + + if [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 0 ]; then + log_info "No signature verification required" + elif [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 1 ] \ + && [ $ima_sig_required -eq 0 ] && [ $ima_signed -eq 0 ] \ + && [ $ima_read_policy -eq 1 ]; then + log_info "No signature verification required" + fi + + log_pass "$succeed_msg" + fi + + # Check the reason for the kexec_file_load failure + echo $line | grep -q "Required key not available" + if [ $? -eq 0 ]; then + if [ $platform_keyring -eq 0 ]; then + log_pass "$failed_msg (-ENOKEY), $key_msg" + else + log_pass "$failed_msg (-ENOKEY)" + fi + fi + + if [ $kexec_sig_required -eq 1 -o $pe_sig_required -eq 1 ] \ + && [ $pe_signed -eq 0 ]; then + log_pass "$failed_msg (missing PE sig)" + fi + + if [ $ima_sig_required -eq 1 ] && [ $ima_signed -eq 0 ]; then + log_pass "$failed_msg (missing IMA sig)" + fi + + if [ $pe_sig_required -eq 0 ] && [ $ima_appraise -eq 1 ] \ + && [ $ima_sig_required -eq 0 ] && [ $ima_read_policy -eq 0 ] \ + && [ $ima_signed -eq 0 ]; then + log_pass "$failed_msg (possibly missing IMA sig)" + fi + + log_pass "$failed_msg" + return 0 +} + +# kexec requires root privileges +require_root_privileges + +# get the kernel config +get_kconfig + +kconfig_enabled "CONFIG_KEXEC_FILE=y" "kexec_file_load is enabled" +if [ $? -eq 0 ]; then + log_skip "kexec_file_load is not enabled" +fi + +# Determine which kernel config options are enabled +kconfig_enabled "CONFIG_IMA_APPRAISE=y" "IMA enabled" +ima_appraise=$? + +kconfig_enabled "CONFIG_IMA_ARCH_POLICY=y" \ + "architecture specific policy enabled" +arch_policy=$? + +kconfig_enabled "CONFIG_INTEGRITY_PLATFORM_KEYRING=y" \ + "platform keyring enabled" +platform_keyring=$? + +kconfig_enabled "CONFIG_IMA_READ_POLICY=y" "reading IMA policy permitted" +ima_read_policy=$? + +kconfig_enabled "CONFIG_KEXEC_SIG_FORCE=y" \ + "kexec signed kernel image required" +kexec_sig_required=$? + +kconfig_enabled "CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y" \ + "PE signed kernel image required" +pe_sig_required=$? + +is_ima_sig_required +ima_sig_required=$? + +get_secureboot_mode +secureboot=$? + +# Are there pe and ima signatures +check_for_pesig +pe_signed=$? + +check_for_imasig +ima_signed=$? + +# Test loading the kernel image via kexec_file_load syscall +kexec_file_load_test diff --git a/tools/testing/selftests/kexec/test_kexec_load.sh b/tools/testing/selftests/kexec/test_kexec_load.sh new file mode 100755 index 000000000000..49c6aa929137 --- /dev/null +++ b/tools/testing/selftests/kexec/test_kexec_load.sh @@ -0,0 +1,47 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Prevent loading a kernel image via the kexec_load syscall when +# signatures are required. (Dependent on CONFIG_IMA_ARCH_POLICY.) + +TEST="$0" +. ./kexec_common_lib.sh + +# kexec requires root privileges +require_root_privileges + +# get the kernel config +get_kconfig + +kconfig_enabled "CONFIG_KEXEC=y" "kexec_load is enabled" +if [ $? -eq 0 ]; then + log_skip "kexec_load is not enabled" +fi + +kconfig_enabled "CONFIG_IMA_APPRAISE=y" "IMA enabled" +ima_appraise=$? + +kconfig_enabled "CONFIG_IMA_ARCH_POLICY=y" \ + "IMA architecture specific policy enabled" +arch_policy=$? + +get_secureboot_mode +secureboot=$? + +# kexec_load should fail in secure boot mode and CONFIG_IMA_ARCH_POLICY enabled +kexec --load $KERNEL_IMAGE > /dev/null 2>&1 +if [ $? -eq 0 ]; then + kexec --unload + if [ $secureboot -eq 1 ] && [ $arch_policy -eq 1 ]; then + log_fail "kexec_load succeeded" + elif [ $ima_appraise -eq 0 -o $arch_policy -eq 0 ]; then + log_info "Either IMA or the IMA arch policy is not enabled" + fi + log_pass "kexec_load succeeded" +else + if [ $secureboot -eq 1 ] && [ $arch_policy -eq 1 ] ; then + log_pass "kexec_load failed" + else + log_fail "kexec_load failed" + fi +fi diff --git a/tools/testing/selftests/kmod/Makefile b/tools/testing/selftests/kmod/Makefile index fa2ccc5fb3de..5b3e746a0bee 100644 --- a/tools/testing/selftests/kmod/Makefile +++ b/tools/testing/selftests/kmod/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Makefile for kmod loading selftests # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index 47e1d995c182..ec15c4f6af55 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -33,6 +33,7 @@ struct ksft_count { }; static struct ksft_count ksft_cnt; +static unsigned int ksft_plan; static inline int ksft_test_num(void) { @@ -61,13 +62,21 @@ static inline void ksft_print_header(void) printf("TAP version 13\n"); } +static inline void ksft_set_plan(unsigned int plan) +{ + ksft_plan = plan; + printf("1..%d\n", ksft_plan); +} + static inline void ksft_print_cnts(void) { - printf("Pass %d Fail %d Xfail %d Xpass %d Skip %d Error %d\n", + if (ksft_plan != ksft_test_num()) + printf("# Planned tests != run tests (%u != %u)\n", + ksft_plan, ksft_test_num()); + printf("# Pass %d Fail %d Xfail %d Xpass %d Skip %d Error %d\n", ksft_cnt.ksft_pass, ksft_cnt.ksft_fail, ksft_cnt.ksft_xfail, ksft_cnt.ksft_xpass, ksft_cnt.ksft_xskip, ksft_cnt.ksft_error); - printf("1..%d\n", ksft_test_num()); } static inline void ksft_print_msg(const char *msg, ...) @@ -111,7 +120,7 @@ static inline void ksft_test_result_skip(const char *msg, ...) ksft_cnt.ksft_xskip++; va_start(args, msg); - printf("ok %d # skip ", ksft_test_num()); + printf("not ok %d # SKIP ", ksft_test_num()); vprintf(msg, args); va_end(args); } @@ -172,7 +181,7 @@ static inline int ksft_exit_skip(const char *msg, ...) va_list args; va_start(args, msg); - printf("1..%d # Skipped: ", ksft_test_num()); + printf("not ok %d # SKIP ", 1 + ksft_test_num()); vprintf(msg, args); va_end(args); } else { diff --git a/tools/testing/selftests/kselftest/prefix.pl b/tools/testing/selftests/kselftest/prefix.pl new file mode 100755 index 000000000000..ec7e48118183 --- /dev/null +++ b/tools/testing/selftests/kselftest/prefix.pl @@ -0,0 +1,23 @@ +#!/usr/bin/perl +# SPDX-License-Identifier: GPL-2.0 +# Prefix all lines with "# ", unbuffered. Command being piped in may need +# to have unbuffering forced with "stdbuf -i0 -o0 -e0 $cmd". +use strict; + +binmode STDIN; +binmode STDOUT; + +STDOUT->autoflush(1); + +my $needed = 1; +while (1) { + my $char; + my $bytes = sysread(STDIN, $char, 1); + exit 0 if ($bytes == 0); + if ($needed) { + print "# "; + $needed = 0; + } + print $char; + $needed = 1 if ($char eq "\n"); +} diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh new file mode 100644 index 000000000000..eff3ee303d0d --- /dev/null +++ b/tools/testing/selftests/kselftest/runner.sh @@ -0,0 +1,86 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Runs a set of tests in a given subdirectory. +export skip_rc=4 +export logfile=/dev/stdout +export per_test_logging= + +# There isn't a shell-agnostic way to find the path of a sourced file, +# so we must rely on BASE_DIR being set to find other tools. +if [ -z "$BASE_DIR" ]; then + echo "Error: BASE_DIR must be set before sourcing." >&2 + exit 1 +fi + +# If Perl is unavailable, we must fall back to line-at-a-time prefixing +# with sed instead of unbuffered output. +tap_prefix() +{ + if [ ! -x /usr/bin/perl ]; then + sed -e 's/^/# /' + else + "$BASE_DIR"/kselftest/prefix.pl + fi +} + +# If stdbuf is unavailable, we must fall back to line-at-a-time piping. +tap_unbuffer() +{ + if ! which stdbuf >/dev/null ; then + "$@" + else + stdbuf -i0 -o0 -e0 "$@" + fi +} + +run_one() +{ + DIR="$1" + TEST="$2" + NUM="$3" + + BASENAME_TEST=$(basename $TEST) + + TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST" + echo "# $TEST_HDR_MSG" + if [ ! -x "$TEST" ]; then + echo -n "# Warning: file $TEST is " + if [ ! -e "$TEST" ]; then + echo "missing!" + else + echo "not executable, correct this." + fi + echo "not ok $test_num $TEST_HDR_MSG" + else + cd `dirname $TEST` > /dev/null + (((((tap_unbuffer ./$BASENAME_TEST 2>&1; echo $? >&3) | + tap_prefix >&4) 3>&1) | + (read xs; exit $xs)) 4>>"$logfile" && + echo "ok $test_num $TEST_HDR_MSG") || + (if [ $? -eq $skip_rc ]; then \ + echo "not ok $test_num $TEST_HDR_MSG # SKIP" + else + echo "not ok $test_num $TEST_HDR_MSG" + fi) + cd - >/dev/null + fi +} + +run_many() +{ + echo "TAP version 13" + DIR=$(basename "$PWD") + test_num=0 + total=$(echo "$@" | wc -w) + echo "1..$total" + for TEST in "$@"; do + BASENAME_TEST=$(basename $TEST) + test_num=$(( test_num + 1 )) + if [ -n "$per_test_logging" ]; then + logfile="/tmp/$BASENAME_TEST" + cat /dev/null > "$logfile" + fi + run_one "$DIR" "$TEST" "$test_num" + done +} diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 2d90c98eeb67..941d9391377f 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -696,6 +696,7 @@ void __run_test(struct __test_metadata *t) t->passed = 1; t->trigger = 0; printf("[ RUN ] %s\n", t->name); + alarm(30); child_pid = fork(); if (child_pid < 0) { printf("ERROR SPAWNING TEST CHILD\n"); @@ -744,6 +745,7 @@ void __run_test(struct __test_metadata *t) } } printf("[ %4s ] %s\n", (t->passed ? "OK" : "FAIL"), t->name); + alarm(0); } static int test_harness_run(int __attribute__((unused)) argc, diff --git a/tools/testing/selftests/kselftest_module.h b/tools/testing/selftests/kselftest_module.h new file mode 100644 index 000000000000..e8eafaf0941a --- /dev/null +++ b/tools/testing/selftests/kselftest_module.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __KSELFTEST_MODULE_H +#define __KSELFTEST_MODULE_H + +#include <linux/module.h> + +/* + * Test framework for writing test modules to be loaded by kselftest. + * See Documentation/dev-tools/kselftest.rst for an example test module. + */ + +#define KSTM_MODULE_GLOBALS() \ +static unsigned int total_tests __initdata; \ +static unsigned int failed_tests __initdata + +#define KSTM_CHECK_ZERO(x) do { \ + total_tests++; \ + if (x) { \ + pr_warn("TC failed at %s:%d\n", __func__, __LINE__); \ + failed_tests++; \ + } \ +} while (0) + +static inline int kstm_report(unsigned int total_tests, unsigned int failed_tests) +{ + if (failed_tests == 0) + pr_info("all %u tests passed\n", total_tests); + else + pr_warn("failed %u out of %u tests\n", failed_tests, total_tests); + + return failed_tests ? -EINVAL : 0; +} + +#define KSTM_MODULE_LOADERS(__module) \ +static int __init __module##_init(void) \ +{ \ + pr_info("loaded.\n"); \ + selftest(); \ + return kstm_report(total_tests, failed_tests); \ +} \ +static void __exit __module##_exit(void) \ +{ \ + pr_info("unloaded.\n"); \ +} \ +module_init(__module##_init); \ +module_exit(__module##_exit) + +#endif /* __KSELFTEST_MODULE_H */ diff --git a/tools/testing/selftests/kselftest_module.sh b/tools/testing/selftests/kselftest_module.sh new file mode 100755 index 000000000000..18e1c7992d30 --- /dev/null +++ b/tools/testing/selftests/kselftest_module.sh @@ -0,0 +1,84 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ + +# +# Runs an individual test module. +# +# kselftest expects a separate executable for each test, this can be +# created by adding a script like this: +# +# #!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ +# $(dirname $0)/../kselftest_module.sh "description" module_name +# +# Example: tools/testing/selftests/lib/printf.sh + +desc="" # Output prefix. +module="" # Filename (without the .ko). +args="" # modprobe arguments. + +modprobe="/sbin/modprobe" + +main() { + parse_args "$@" + assert_root + assert_have_module + run_module +} + +parse_args() { + script=${0##*/} + + if [ $# -lt 2 ]; then + echo "Usage: $script <description> <module_name> [FAIL]" + exit 1 + fi + + desc="$1" + shift || true + module="$1" + shift || true + args="$@" +} + +assert_root() { + if [ ! -w /dev ]; then + skip "please run as root" + fi +} + +assert_have_module() { + if ! $modprobe -q -n $module; then + skip "module $module is not found" + fi +} + +run_module() { + if $modprobe -q $module $args; then + $modprobe -q -r $module + say "ok" + else + fail "" + fi +} + +say() { + echo "$desc: $1" +} + + +fail() { + say "$1 [FAIL]" >&2 + exit 1 +} + +skip() { + say "$1 [SKIP]" >&2 + # Kselftest framework requirement - SKIP code is 4. + exit 4 +} + +# +# Main script +# +main "$@" diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index 2689d1ea6d7a..df1bf9230a74 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -1,9 +1,14 @@ /x86_64/cr4_cpuid_sync_test /x86_64/evmcs_test +/x86_64/hyperv_cpuid +/x86_64/kvm_create_max_vcpus /x86_64/platform_info_test /x86_64/set_sregs_test +/x86_64/smm_test +/x86_64/state_test /x86_64/sync_regs_test /x86_64/vmx_close_while_nested_test +/x86_64/vmx_set_nested_state_test /x86_64/vmx_tsc_adjust_test -/x86_64/state_test +/clear_dirty_log_test /dirty_log_test diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 7514fcea91a7..a035295e54d7 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -1,3 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +include ../../../../scripts/Kbuild.include + all: top_srcdir = ../../../.. @@ -17,6 +20,9 @@ TEST_GEN_PROGS_x86_64 += x86_64/state_test TEST_GEN_PROGS_x86_64 += x86_64/evmcs_test TEST_GEN_PROGS_x86_64 += x86_64/hyperv_cpuid TEST_GEN_PROGS_x86_64 += x86_64/vmx_close_while_nested_test +TEST_GEN_PROGS_x86_64 += x86_64/smm_test +TEST_GEN_PROGS_x86_64 += x86_64/kvm_create_max_vcpus +TEST_GEN_PROGS_x86_64 += x86_64/vmx_set_nested_state_test TEST_GEN_PROGS_x86_64 += dirty_log_test TEST_GEN_PROGS_x86_64 += clear_dirty_log_test @@ -30,7 +36,11 @@ INSTALL_HDR_PATH = $(top_srcdir)/usr LINUX_HDR_PATH = $(INSTALL_HDR_PATH)/include/ LINUX_TOOL_INCLUDE = $(top_srcdir)/tools/include CFLAGS += -O2 -g -std=gnu99 -fno-stack-protector -fno-PIE -I$(LINUX_TOOL_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude -I$(<D) -Iinclude/$(UNAME_M) -I.. -LDFLAGS += -pthread -no-pie + +no-pie-option := $(call try-run, echo 'int main() { return 0; }' | \ + $(CC) -Werror $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -no-pie -x c - -o "$$TMP", -no-pie) + +LDFLAGS += -pthread $(no-pie-option) # After inclusion, $(OUTPUT) is defined and # $(TEST_GEN_PROGS) starts with $(OUTPUT)/ diff --git a/tools/testing/selftests/kvm/dirty_log_test.c b/tools/testing/selftests/kvm/dirty_log_test.c index 4715cfba20dc..f50a15c38f9b 100644 --- a/tools/testing/selftests/kvm/dirty_log_test.c +++ b/tools/testing/selftests/kvm/dirty_log_test.c @@ -288,8 +288,11 @@ static void run_test(enum vm_guest_mode mode, unsigned long iterations, #endif max_gfn = (1ul << (guest_pa_bits - guest_page_shift)) - 1; guest_page_size = (1ul << guest_page_shift); - /* 1G of guest page sized pages */ - guest_num_pages = (1ul << (30 - guest_page_shift)); + /* + * A little more than 1G of guest page sized pages. Cover the + * case where the size is not aligned to 64 pages. + */ + guest_num_pages = (1ul << (30 - guest_page_shift)) + 3; host_page_size = getpagesize(); host_num_pages = (guest_num_pages * guest_page_size) / host_page_size + !!((guest_num_pages * guest_page_size) % host_page_size); @@ -311,7 +314,7 @@ static void run_test(enum vm_guest_mode mode, unsigned long iterations, #ifdef USE_CLEAR_DIRTY_LOG struct kvm_enable_cap cap = {}; - cap.cap = KVM_CAP_MANUAL_DIRTY_LOG_PROTECT; + cap.cap = KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2; cap.args[0] = 1; vm_enable_cap(vm, &cap); #endif @@ -359,7 +362,7 @@ static void run_test(enum vm_guest_mode mode, unsigned long iterations, kvm_vm_get_dirty_log(vm, TEST_MEM_SLOT_INDEX, bmap); #ifdef USE_CLEAR_DIRTY_LOG kvm_vm_clear_dirty_log(vm, TEST_MEM_SLOT_INDEX, bmap, 0, - DIV_ROUND_UP(host_num_pages, 64) * 64); + host_num_pages); #endif vm_dirty_log_verify(bmap); iteration++; @@ -427,7 +430,7 @@ int main(int argc, char *argv[]) int opt, i; #ifdef USE_CLEAR_DIRTY_LOG - if (!kvm_check_cap(KVM_CAP_MANUAL_DIRTY_LOG_PROTECT)) { + if (!kvm_check_cap(KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2)) { fprintf(stderr, "KVM_CLEAR_DIRTY_LOG not available, skipping tests\n"); exit(KSFT_SKIP); } diff --git a/tools/testing/selftests/kvm/include/kvm_util.h b/tools/testing/selftests/kvm/include/kvm_util.h index 07b71ad9734a..8c6b9619797d 100644 --- a/tools/testing/selftests/kvm/include/kvm_util.h +++ b/tools/testing/selftests/kvm/include/kvm_util.h @@ -118,6 +118,10 @@ void vcpu_events_get(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_events *events); void vcpu_events_set(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_events *events); +void vcpu_nested_state_get(struct kvm_vm *vm, uint32_t vcpuid, + struct kvm_nested_state *state); +int vcpu_nested_state_set(struct kvm_vm *vm, uint32_t vcpuid, + struct kvm_nested_state *state, bool ignore_error); const char *exit_reason_str(unsigned int exit_reason); diff --git a/tools/testing/selftests/kvm/include/x86_64/processor.h b/tools/testing/selftests/kvm/include/x86_64/processor.h index e2884c2b81ff..6063d5b2f356 100644 --- a/tools/testing/selftests/kvm/include/x86_64/processor.h +++ b/tools/testing/selftests/kvm/include/x86_64/processor.h @@ -778,6 +778,33 @@ void vcpu_set_msr(struct kvm_vm *vm, uint32_t vcpuid, uint64_t msr_index, #define MSR_IA32_APICBASE_ENABLE (1<<11) #define MSR_IA32_APICBASE_BASE (0xfffff<<12) +#define APIC_BASE_MSR 0x800 +#define X2APIC_ENABLE (1UL << 10) +#define APIC_ICR 0x300 +#define APIC_DEST_SELF 0x40000 +#define APIC_DEST_ALLINC 0x80000 +#define APIC_DEST_ALLBUT 0xC0000 +#define APIC_ICR_RR_MASK 0x30000 +#define APIC_ICR_RR_INVALID 0x00000 +#define APIC_ICR_RR_INPROG 0x10000 +#define APIC_ICR_RR_VALID 0x20000 +#define APIC_INT_LEVELTRIG 0x08000 +#define APIC_INT_ASSERT 0x04000 +#define APIC_ICR_BUSY 0x01000 +#define APIC_DEST_LOGICAL 0x00800 +#define APIC_DEST_PHYSICAL 0x00000 +#define APIC_DM_FIXED 0x00000 +#define APIC_DM_FIXED_MASK 0x00700 +#define APIC_DM_LOWEST 0x00100 +#define APIC_DM_SMI 0x00200 +#define APIC_DM_REMRD 0x00300 +#define APIC_DM_NMI 0x00400 +#define APIC_DM_INIT 0x00500 +#define APIC_DM_STARTUP 0x00600 +#define APIC_DM_EXTINT 0x00700 +#define APIC_VECTOR_MASK 0x000FF +#define APIC_ICR2 0x310 + #define MSR_IA32_TSCDEADLINE 0x000006e0 #define MSR_IA32_UCODE_WRITE 0x00000079 diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c index efa0aad8b3c6..e9113857f44e 100644 --- a/tools/testing/selftests/kvm/lib/kvm_util.c +++ b/tools/testing/selftests/kvm/lib/kvm_util.c @@ -91,6 +91,11 @@ static void vm_open(struct kvm_vm *vm, int perm, unsigned long type) if (vm->kvm_fd < 0) exit(KSFT_SKIP); + if (!kvm_check_cap(KVM_CAP_IMMEDIATE_EXIT)) { + fprintf(stderr, "immediate_exit not available, skipping test\n"); + exit(KSFT_SKIP); + } + vm->fd = ioctl(vm->kvm_fd, KVM_CREATE_VM, type); TEST_ASSERT(vm->fd >= 0, "KVM_CREATE_VM ioctl failed, " "rc: %i errno: %i", vm->fd, errno); @@ -1245,6 +1250,38 @@ void vcpu_events_set(struct kvm_vm *vm, uint32_t vcpuid, ret, errno); } +void vcpu_nested_state_get(struct kvm_vm *vm, uint32_t vcpuid, + struct kvm_nested_state *state) +{ + struct vcpu *vcpu = vcpu_find(vm, vcpuid); + int ret; + + TEST_ASSERT(vcpu != NULL, "vcpu not found, vcpuid: %u", vcpuid); + + ret = ioctl(vcpu->fd, KVM_GET_NESTED_STATE, state); + TEST_ASSERT(ret == 0, + "KVM_SET_NESTED_STATE failed, ret: %i errno: %i", + ret, errno); +} + +int vcpu_nested_state_set(struct kvm_vm *vm, uint32_t vcpuid, + struct kvm_nested_state *state, bool ignore_error) +{ + struct vcpu *vcpu = vcpu_find(vm, vcpuid); + int ret; + + TEST_ASSERT(vcpu != NULL, "vcpu not found, vcpuid: %u", vcpuid); + + ret = ioctl(vcpu->fd, KVM_SET_NESTED_STATE, state); + if (!ignore_error) { + TEST_ASSERT(ret == 0, + "KVM_SET_NESTED_STATE failed, ret: %i errno: %i", + ret, errno); + } + + return ret; +} + /* * VM VCPU System Regs Get * diff --git a/tools/testing/selftests/kvm/lib/x86_64/processor.c b/tools/testing/selftests/kvm/lib/x86_64/processor.c index f28127f4a3af..dc7fae9fa424 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/processor.c +++ b/tools/testing/selftests/kvm/lib/x86_64/processor.c @@ -1030,6 +1030,14 @@ struct kvm_x86_state *vcpu_save_state(struct kvm_vm *vm, uint32_t vcpuid) nested_size, sizeof(state->nested_)); } + /* + * When KVM exits to userspace with KVM_EXIT_IO, KVM guarantees + * guest state is consistent only after userspace re-enters the + * kernel with KVM_RUN. Complete IO prior to migrating state + * to a new VM. + */ + vcpu_run_complete_io(vm, vcpuid); + nmsrs = kvm_get_num_msrs(vm); list = malloc(sizeof(*list) + nmsrs * sizeof(list->indices[0])); list->nmsrs = nmsrs; @@ -1093,12 +1101,6 @@ void vcpu_load_state(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_x86_state *s struct vcpu *vcpu = vcpu_find(vm, vcpuid); int r; - if (state->nested.size) { - r = ioctl(vcpu->fd, KVM_SET_NESTED_STATE, &state->nested); - TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_NESTED_STATE, r: %i", - r); - } - r = ioctl(vcpu->fd, KVM_SET_XSAVE, &state->xsave); TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_XSAVE, r: %i", r); @@ -1130,4 +1132,10 @@ void vcpu_load_state(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_x86_state *s r = ioctl(vcpu->fd, KVM_SET_REGS, &state->regs); TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_REGS, r: %i", r); + + if (state->nested.size) { + r = ioctl(vcpu->fd, KVM_SET_NESTED_STATE, &state->nested); + TEST_ASSERT(r == 0, "Unexpected result from KVM_SET_NESTED_STATE, r: %i", + r); + } } diff --git a/tools/testing/selftests/kvm/x86_64/evmcs_test.c b/tools/testing/selftests/kvm/x86_64/evmcs_test.c index c49c2a28b0eb..36669684eca5 100644 --- a/tools/testing/selftests/kvm/x86_64/evmcs_test.c +++ b/tools/testing/selftests/kvm/x86_64/evmcs_test.c @@ -123,8 +123,6 @@ int main(int argc, char *argv[]) stage, run->exit_reason, exit_reason_str(run->exit_reason)); - memset(®s1, 0, sizeof(regs1)); - vcpu_regs_get(vm, VCPU_ID, ®s1); switch (get_ucall(vm, VCPU_ID, &uc)) { case UCALL_ABORT: TEST_ASSERT(false, "%s at %s:%d", (const char *)uc.args[0], @@ -144,6 +142,9 @@ int main(int argc, char *argv[]) stage, (ulong)uc.args[1]); state = vcpu_save_state(vm, VCPU_ID); + memset(®s1, 0, sizeof(regs1)); + vcpu_regs_get(vm, VCPU_ID, ®s1); + kvm_vm_release(vm); /* Restore state in a new VM. */ diff --git a/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c b/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c index 264425f75806..9a21e912097c 100644 --- a/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c +++ b/tools/testing/selftests/kvm/x86_64/hyperv_cpuid.c @@ -141,7 +141,13 @@ int main(int argc, char *argv[]) free(hv_cpuid_entries); - vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap); + rv = _vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap); + + if (rv) { + fprintf(stderr, + "Enlightened VMCS is unsupported, skip related test\n"); + goto vm_free; + } hv_cpuid_entries = kvm_get_supported_hv_cpuid(vm); if (!hv_cpuid_entries) @@ -151,6 +157,7 @@ int main(int argc, char *argv[]) free(hv_cpuid_entries); +vm_free: kvm_vm_free(vm); return 0; diff --git a/tools/testing/selftests/kvm/x86_64/kvm_create_max_vcpus.c b/tools/testing/selftests/kvm/x86_64/kvm_create_max_vcpus.c new file mode 100644 index 000000000000..50e92996f918 --- /dev/null +++ b/tools/testing/selftests/kvm/x86_64/kvm_create_max_vcpus.c @@ -0,0 +1,70 @@ +/* + * kvm_create_max_vcpus + * + * Copyright (C) 2019, Google LLC. + * + * This work is licensed under the terms of the GNU GPL, version 2. + * + * Test for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_VCPU_ID. + */ + +#define _GNU_SOURCE /* for program_invocation_short_name */ +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#include "test_util.h" + +#include "kvm_util.h" +#include "asm/kvm.h" +#include "linux/kvm.h" + +void test_vcpu_creation(int first_vcpu_id, int num_vcpus) +{ + struct kvm_vm *vm; + int i; + + printf("Testing creating %d vCPUs, with IDs %d...%d.\n", + num_vcpus, first_vcpu_id, first_vcpu_id + num_vcpus - 1); + + vm = vm_create(VM_MODE_P52V48_4K, DEFAULT_GUEST_PHY_PAGES, O_RDWR); + + for (i = 0; i < num_vcpus; i++) { + int vcpu_id = first_vcpu_id + i; + + /* This asserts that the vCPU was created. */ + vm_vcpu_add(vm, vcpu_id, 0, 0); + } + + kvm_vm_free(vm); +} + +int main(int argc, char *argv[]) +{ + int kvm_max_vcpu_id = kvm_check_cap(KVM_CAP_MAX_VCPU_ID); + int kvm_max_vcpus = kvm_check_cap(KVM_CAP_MAX_VCPUS); + + printf("KVM_CAP_MAX_VCPU_ID: %d\n", kvm_max_vcpu_id); + printf("KVM_CAP_MAX_VCPUS: %d\n", kvm_max_vcpus); + + /* + * Upstream KVM prior to 4.8 does not support KVM_CAP_MAX_VCPU_ID. + * Userspace is supposed to use KVM_CAP_MAX_VCPUS as the maximum ID + * in this case. + */ + if (!kvm_max_vcpu_id) + kvm_max_vcpu_id = kvm_max_vcpus; + + TEST_ASSERT(kvm_max_vcpu_id >= kvm_max_vcpus, + "KVM_MAX_VCPU_ID (%d) must be at least as large as KVM_MAX_VCPUS (%d).", + kvm_max_vcpu_id, kvm_max_vcpus); + + test_vcpu_creation(0, kvm_max_vcpus); + + if (kvm_max_vcpu_id > kvm_max_vcpus) + test_vcpu_creation( + kvm_max_vcpu_id - kvm_max_vcpus, kvm_max_vcpus); + + return 0; +} diff --git a/tools/testing/selftests/kvm/x86_64/smm_test.c b/tools/testing/selftests/kvm/x86_64/smm_test.c new file mode 100644 index 000000000000..fb8086964d83 --- /dev/null +++ b/tools/testing/selftests/kvm/x86_64/smm_test.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018, Red Hat, Inc. + * + * Tests for SMM. + */ +#define _GNU_SOURCE /* for program_invocation_short_name */ +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <sys/ioctl.h> + +#include "test_util.h" + +#include "kvm_util.h" + +#include "vmx.h" + +#define VCPU_ID 1 + +#define PAGE_SIZE 4096 + +#define SMRAM_SIZE 65536 +#define SMRAM_MEMSLOT ((1 << 16) | 1) +#define SMRAM_PAGES (SMRAM_SIZE / PAGE_SIZE) +#define SMRAM_GPA 0x1000000 +#define SMRAM_STAGE 0xfe + +#define STR(x) #x +#define XSTR(s) STR(s) + +#define SYNC_PORT 0xe +#define DONE 0xff + +/* + * This is compiled as normal 64-bit code, however, SMI handler is executed + * in real-address mode. To stay simple we're limiting ourselves to a mode + * independent subset of asm here. + * SMI handler always report back fixed stage SMRAM_STAGE. + */ +uint8_t smi_handler[] = { + 0xb0, SMRAM_STAGE, /* mov $SMRAM_STAGE, %al */ + 0xe4, SYNC_PORT, /* in $SYNC_PORT, %al */ + 0x0f, 0xaa, /* rsm */ +}; + +void sync_with_host(uint64_t phase) +{ + asm volatile("in $" XSTR(SYNC_PORT)", %%al \n" + : : "a" (phase)); +} + +void self_smi(void) +{ + wrmsr(APIC_BASE_MSR + (APIC_ICR >> 4), + APIC_DEST_SELF | APIC_INT_ASSERT | APIC_DM_SMI); +} + +void guest_code(struct vmx_pages *vmx_pages) +{ + uint64_t apicbase = rdmsr(MSR_IA32_APICBASE); + + sync_with_host(1); + + wrmsr(MSR_IA32_APICBASE, apicbase | X2APIC_ENABLE); + + sync_with_host(2); + + self_smi(); + + sync_with_host(4); + + if (vmx_pages) { + GUEST_ASSERT(prepare_for_vmx_operation(vmx_pages)); + + sync_with_host(5); + + self_smi(); + + sync_with_host(7); + } + + sync_with_host(DONE); +} + +int main(int argc, char *argv[]) +{ + struct vmx_pages *vmx_pages = NULL; + vm_vaddr_t vmx_pages_gva = 0; + + struct kvm_regs regs; + struct kvm_vm *vm; + struct kvm_run *run; + struct kvm_x86_state *state; + int stage, stage_reported; + + /* Create VM */ + vm = vm_create_default(VCPU_ID, 0, guest_code); + + vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); + + run = vcpu_state(vm, VCPU_ID); + + vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS, SMRAM_GPA, + SMRAM_MEMSLOT, SMRAM_PAGES, 0); + TEST_ASSERT(vm_phy_pages_alloc(vm, SMRAM_PAGES, SMRAM_GPA, SMRAM_MEMSLOT) + == SMRAM_GPA, "could not allocate guest physical addresses?"); + + memset(addr_gpa2hva(vm, SMRAM_GPA), 0x0, SMRAM_SIZE); + memcpy(addr_gpa2hva(vm, SMRAM_GPA) + 0x8000, smi_handler, + sizeof(smi_handler)); + + vcpu_set_msr(vm, VCPU_ID, MSR_IA32_SMBASE, SMRAM_GPA); + + if (kvm_check_cap(KVM_CAP_NESTED_STATE)) { + vmx_pages = vcpu_alloc_vmx(vm, &vmx_pages_gva); + vcpu_args_set(vm, VCPU_ID, 1, vmx_pages_gva); + } else { + printf("will skip SMM test with VMX enabled\n"); + vcpu_args_set(vm, VCPU_ID, 1, 0); + } + + for (stage = 1;; stage++) { + _vcpu_run(vm, VCPU_ID); + TEST_ASSERT(run->exit_reason == KVM_EXIT_IO, + "Stage %d: unexpected exit reason: %u (%s),\n", + stage, run->exit_reason, + exit_reason_str(run->exit_reason)); + + memset(®s, 0, sizeof(regs)); + vcpu_regs_get(vm, VCPU_ID, ®s); + + stage_reported = regs.rax & 0xff; + + if (stage_reported == DONE) + goto done; + + TEST_ASSERT(stage_reported == stage || + stage_reported == SMRAM_STAGE, + "Unexpected stage: #%x, got %x", + stage, stage_reported); + + state = vcpu_save_state(vm, VCPU_ID); + kvm_vm_release(vm); + kvm_vm_restart(vm, O_RDWR); + vm_vcpu_add(vm, VCPU_ID, 0, 0); + vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); + vcpu_load_state(vm, VCPU_ID, state); + run = vcpu_state(vm, VCPU_ID); + free(state); + } + +done: + kvm_vm_free(vm); +} diff --git a/tools/testing/selftests/kvm/x86_64/state_test.c b/tools/testing/selftests/kvm/x86_64/state_test.c index 30f75856cf39..e0a3c0204b7c 100644 --- a/tools/testing/selftests/kvm/x86_64/state_test.c +++ b/tools/testing/selftests/kvm/x86_64/state_test.c @@ -134,11 +134,6 @@ int main(int argc, char *argv[]) struct kvm_cpuid_entry2 *entry = kvm_get_supported_cpuid_entry(1); - if (!kvm_check_cap(KVM_CAP_IMMEDIATE_EXIT)) { - fprintf(stderr, "immediate_exit not available, skipping test\n"); - exit(KSFT_SKIP); - } - /* Create VM */ vm = vm_create_default(VCPU_ID, 0, guest_code); vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); @@ -179,18 +174,10 @@ int main(int argc, char *argv[]) uc.args[1] == stage, "Unexpected register values vmexit #%lx, got %lx", stage, (ulong)uc.args[1]); - /* - * When KVM exits to userspace with KVM_EXIT_IO, KVM guarantees - * guest state is consistent only after userspace re-enters the - * kernel with KVM_RUN. Complete IO prior to migrating state - * to a new VM. - */ - vcpu_run_complete_io(vm, VCPU_ID); - + state = vcpu_save_state(vm, VCPU_ID); memset(®s1, 0, sizeof(regs1)); vcpu_regs_get(vm, VCPU_ID, ®s1); - state = vcpu_save_state(vm, VCPU_ID); kvm_vm_release(vm); /* Restore state in a new VM. */ diff --git a/tools/testing/selftests/kvm/x86_64/vmx_set_nested_state_test.c b/tools/testing/selftests/kvm/x86_64/vmx_set_nested_state_test.c new file mode 100644 index 000000000000..61a2163cf9f1 --- /dev/null +++ b/tools/testing/selftests/kvm/x86_64/vmx_set_nested_state_test.c @@ -0,0 +1,280 @@ +/* + * vmx_set_nested_state_test + * + * Copyright (C) 2019, Google LLC. + * + * This work is licensed under the terms of the GNU GPL, version 2. + * + * This test verifies the integrity of calling the ioctl KVM_SET_NESTED_STATE. + */ + +#include "test_util.h" +#include "kvm_util.h" +#include "processor.h" +#include "vmx.h" + +#include <errno.h> +#include <linux/kvm.h> +#include <string.h> +#include <sys/ioctl.h> +#include <unistd.h> + +/* + * Mirror of VMCS12_REVISION in arch/x86/kvm/vmx/vmcs12.h. If that value + * changes this should be updated. + */ +#define VMCS12_REVISION 0x11e57ed0 +#define VCPU_ID 5 + +void test_nested_state(struct kvm_vm *vm, struct kvm_nested_state *state) +{ + volatile struct kvm_run *run; + + vcpu_nested_state_set(vm, VCPU_ID, state, false); + run = vcpu_state(vm, VCPU_ID); + vcpu_run(vm, VCPU_ID); + TEST_ASSERT(run->exit_reason == KVM_EXIT_SHUTDOWN, + "Got exit_reason other than KVM_EXIT_SHUTDOWN: %u (%s),\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); +} + +void test_nested_state_expect_errno(struct kvm_vm *vm, + struct kvm_nested_state *state, + int expected_errno) +{ + volatile struct kvm_run *run; + int rv; + + rv = vcpu_nested_state_set(vm, VCPU_ID, state, true); + TEST_ASSERT(rv == -1 && errno == expected_errno, + "Expected %s (%d) from vcpu_nested_state_set but got rv: %i errno: %s (%d)", + strerror(expected_errno), expected_errno, rv, strerror(errno), + errno); + run = vcpu_state(vm, VCPU_ID); + vcpu_run(vm, VCPU_ID); + TEST_ASSERT(run->exit_reason == KVM_EXIT_SHUTDOWN, + "Got exit_reason other than KVM_EXIT_SHUTDOWN: %u (%s),\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); +} + +void test_nested_state_expect_einval(struct kvm_vm *vm, + struct kvm_nested_state *state) +{ + test_nested_state_expect_errno(vm, state, EINVAL); +} + +void test_nested_state_expect_efault(struct kvm_vm *vm, + struct kvm_nested_state *state) +{ + test_nested_state_expect_errno(vm, state, EFAULT); +} + +void set_revision_id_for_vmcs12(struct kvm_nested_state *state, + u32 vmcs12_revision) +{ + /* Set revision_id in vmcs12 to vmcs12_revision. */ + *(u32 *)(state->data) = vmcs12_revision; +} + +void set_default_state(struct kvm_nested_state *state) +{ + memset(state, 0, sizeof(*state)); + state->flags = KVM_STATE_NESTED_RUN_PENDING | + KVM_STATE_NESTED_GUEST_MODE; + state->format = 0; + state->size = sizeof(*state); +} + +void set_default_vmx_state(struct kvm_nested_state *state, int size) +{ + memset(state, 0, size); + state->flags = KVM_STATE_NESTED_GUEST_MODE | + KVM_STATE_NESTED_RUN_PENDING | + KVM_STATE_NESTED_EVMCS; + state->format = 0; + state->size = size; + state->vmx.vmxon_pa = 0x1000; + state->vmx.vmcs_pa = 0x2000; + state->vmx.smm.flags = 0; + set_revision_id_for_vmcs12(state, VMCS12_REVISION); +} + +void test_vmx_nested_state(struct kvm_vm *vm) +{ + /* Add a page for VMCS12. */ + const int state_sz = sizeof(struct kvm_nested_state) + getpagesize(); + struct kvm_nested_state *state = + (struct kvm_nested_state *)malloc(state_sz); + + /* The format must be set to 0. 0 for VMX, 1 for SVM. */ + set_default_vmx_state(state, state_sz); + state->format = 1; + test_nested_state_expect_einval(vm, state); + + /* + * We cannot virtualize anything if the guest does not have VMX + * enabled. + */ + set_default_vmx_state(state, state_sz); + test_nested_state_expect_einval(vm, state); + + /* + * We cannot virtualize anything if the guest does not have VMX + * enabled. We expect KVM_SET_NESTED_STATE to return 0 if vmxon_pa + * is set to -1ull. + */ + set_default_vmx_state(state, state_sz); + state->vmx.vmxon_pa = -1ull; + test_nested_state(vm, state); + + /* Enable VMX in the guest CPUID. */ + vcpu_set_cpuid(vm, VCPU_ID, kvm_get_supported_cpuid()); + + /* It is invalid to have vmxon_pa == -1ull and SMM flags non-zero. */ + set_default_vmx_state(state, state_sz); + state->vmx.vmxon_pa = -1ull; + state->vmx.smm.flags = 1; + test_nested_state_expect_einval(vm, state); + + /* It is invalid to have vmxon_pa == -1ull and vmcs_pa != -1ull. */ + set_default_vmx_state(state, state_sz); + state->vmx.vmxon_pa = -1ull; + state->vmx.vmcs_pa = 0; + test_nested_state_expect_einval(vm, state); + + /* + * Setting vmxon_pa == -1ull and vmcs_pa == -1ull exits early without + * setting the nested state. + */ + set_default_vmx_state(state, state_sz); + state->vmx.vmxon_pa = -1ull; + state->vmx.vmcs_pa = -1ull; + test_nested_state(vm, state); + + /* It is invalid to have vmxon_pa set to a non-page aligned address. */ + set_default_vmx_state(state, state_sz); + state->vmx.vmxon_pa = 1; + test_nested_state_expect_einval(vm, state); + + /* + * It is invalid to have KVM_STATE_NESTED_SMM_GUEST_MODE and + * KVM_STATE_NESTED_GUEST_MODE set together. + */ + set_default_vmx_state(state, state_sz); + state->flags = KVM_STATE_NESTED_GUEST_MODE | + KVM_STATE_NESTED_RUN_PENDING; + state->vmx.smm.flags = KVM_STATE_NESTED_SMM_GUEST_MODE; + test_nested_state_expect_einval(vm, state); + + /* + * It is invalid to have any of the SMM flags set besides: + * KVM_STATE_NESTED_SMM_GUEST_MODE + * KVM_STATE_NESTED_SMM_VMXON + */ + set_default_vmx_state(state, state_sz); + state->vmx.smm.flags = ~(KVM_STATE_NESTED_SMM_GUEST_MODE | + KVM_STATE_NESTED_SMM_VMXON); + test_nested_state_expect_einval(vm, state); + + /* Outside SMM, SMM flags must be zero. */ + set_default_vmx_state(state, state_sz); + state->flags = 0; + state->vmx.smm.flags = KVM_STATE_NESTED_SMM_GUEST_MODE; + test_nested_state_expect_einval(vm, state); + + /* Size must be large enough to fit kvm_nested_state and vmcs12. */ + set_default_vmx_state(state, state_sz); + state->size = sizeof(*state); + test_nested_state(vm, state); + + /* vmxon_pa cannot be the same address as vmcs_pa. */ + set_default_vmx_state(state, state_sz); + state->vmx.vmxon_pa = 0; + state->vmx.vmcs_pa = 0; + test_nested_state_expect_einval(vm, state); + + /* The revision id for vmcs12 must be VMCS12_REVISION. */ + set_default_vmx_state(state, state_sz); + set_revision_id_for_vmcs12(state, 0); + test_nested_state_expect_einval(vm, state); + + /* + * Test that if we leave nesting the state reflects that when we get + * it again. + */ + set_default_vmx_state(state, state_sz); + state->vmx.vmxon_pa = -1ull; + state->vmx.vmcs_pa = -1ull; + state->flags = 0; + test_nested_state(vm, state); + vcpu_nested_state_get(vm, VCPU_ID, state); + TEST_ASSERT(state->size >= sizeof(*state) && state->size <= state_sz, + "Size must be between %d and %d. The size returned was %d.", + sizeof(*state), state_sz, state->size); + TEST_ASSERT(state->vmx.vmxon_pa == -1ull, "vmxon_pa must be -1ull."); + TEST_ASSERT(state->vmx.vmcs_pa == -1ull, "vmcs_pa must be -1ull."); + + free(state); +} + +int main(int argc, char *argv[]) +{ + struct kvm_vm *vm; + struct kvm_nested_state state; + struct kvm_cpuid_entry2 *entry = kvm_get_supported_cpuid_entry(1); + + if (!kvm_check_cap(KVM_CAP_NESTED_STATE)) { + printf("KVM_CAP_NESTED_STATE not available, skipping test\n"); + exit(KSFT_SKIP); + } + + /* + * AMD currently does not implement set_nested_state, so for now we + * just early out. + */ + if (!(entry->ecx & CPUID_VMX)) { + fprintf(stderr, "nested VMX not enabled, skipping test\n"); + exit(KSFT_SKIP); + } + + vm = vm_create_default(VCPU_ID, 0, 0); + + /* Passing a NULL kvm_nested_state causes a EFAULT. */ + test_nested_state_expect_efault(vm, NULL); + + /* 'size' cannot be smaller than sizeof(kvm_nested_state). */ + set_default_state(&state); + state.size = 0; + test_nested_state_expect_einval(vm, &state); + + /* + * Setting the flags 0xf fails the flags check. The only flags that + * can be used are: + * KVM_STATE_NESTED_GUEST_MODE + * KVM_STATE_NESTED_RUN_PENDING + * KVM_STATE_NESTED_EVMCS + */ + set_default_state(&state); + state.flags = 0xf; + test_nested_state_expect_einval(vm, &state); + + /* + * If KVM_STATE_NESTED_RUN_PENDING is set then + * KVM_STATE_NESTED_GUEST_MODE has to be set as well. + */ + set_default_state(&state); + state.flags = KVM_STATE_NESTED_RUN_PENDING; + test_nested_state_expect_einval(vm, &state); + + /* + * TODO: When SVM support is added for KVM_SET_NESTED_STATE + * add tests here to support it like VMX. + */ + if (entry->ecx & CPUID_VMX) + test_vmx_nested_state(vm); + + kvm_vm_free(vm); + return 0; +} diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 8b0f16409ed7..077337195783 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -3,8 +3,12 @@ CC := $(CROSS_COMPILE)gcc ifeq (0,$(MAKELEVEL)) -OUTPUT := $(shell pwd) + ifeq ($(OUTPUT),) + OUTPUT := $(shell pwd) + DEFAULT_INSTALL_HDR_PATH := 1 + endif endif +selfdir = $(realpath $(dir $(filter %/lib.mk,$(MAKEFILE_LIST)))) # The following are built by lib.mk common compile rules. # TEST_CUSTOM_PROGS should be used by tests that require @@ -21,9 +25,34 @@ top_srcdir ?= ../../../.. include $(top_srcdir)/scripts/subarch.include ARCH ?= $(SUBARCH) +# set default goal to all, so make without a target runs all, even when +# all isn't the first target in the file. +.DEFAULT_GOAL := all + +# Invoke headers install with --no-builtin-rules to avoid circular +# dependency in "make kselftest" case. In this case, second level +# make inherits builtin-rules which will use the rule generate +# Makefile.o and runs into +# "Circular Makefile.o <- prepare dependency dropped." +# and headers_install fails and test compile fails. +# O= KBUILD_OUTPUT cases don't run into this error, since main Makefile +# invokes them as sub-makes and --no-builtin-rules is not necessary, +# but doesn't cause any failures. Keep it simple and use the same +# flags in both cases. +# Note that the support to install headers from lib.mk is necessary +# when test Makefile is run directly with "make -C". +# When local build is done, headers are installed in the default +# INSTALL_HDR_PATH usr/include. .PHONY: khdr khdr: - make ARCH=$(ARCH) -C $(top_srcdir) headers_install +ifndef KSFT_KHDR_INSTALL_DONE +ifeq (1,$(DEFAULT_INSTALL_HDR_PATH)) + make --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install +else + make --no-builtin-rules INSTALL_HDR_PATH=$$OUTPUT/usr \ + ARCH=$(ARCH) -C $(top_srcdir) headers_install +endif +endif all: khdr $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) else @@ -31,44 +60,13 @@ all: $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) endif .ONESHELL: -define RUN_TEST_PRINT_RESULT - TEST_HDR_MSG="selftests: "`basename $$PWD`:" $$BASENAME_TEST"; \ - echo $$TEST_HDR_MSG; \ - echo "========================================"; \ - if [ ! -x $$TEST ]; then \ - echo "$$TEST_HDR_MSG: Warning: file $$BASENAME_TEST is not executable, correct this.";\ - echo "not ok 1..$$test_num $$TEST_HDR_MSG [FAIL]"; \ - else \ - cd `dirname $$TEST` > /dev/null; \ - if [ "X$(summary)" != "X" ]; then \ - (./$$BASENAME_TEST > /tmp/$$BASENAME_TEST 2>&1 && \ - echo "ok 1..$$test_num $$TEST_HDR_MSG [PASS]") || \ - (if [ $$? -eq $$skip ]; then \ - echo "not ok 1..$$test_num $$TEST_HDR_MSG [SKIP]"; \ - else echo "not ok 1..$$test_num $$TEST_HDR_MSG [FAIL]"; \ - fi;) \ - else \ - (./$$BASENAME_TEST && \ - echo "ok 1..$$test_num $$TEST_HDR_MSG [PASS]") || \ - (if [ $$? -eq $$skip ]; then \ - echo "not ok 1..$$test_num $$TEST_HDR_MSG [SKIP]"; \ - else echo "not ok 1..$$test_num $$TEST_HDR_MSG [FAIL]"; \ - fi;) \ - fi; \ - cd - > /dev/null; \ - fi; -endef - define RUN_TESTS - @export KSFT_TAP_LEVEL=`echo 1`; \ - test_num=`echo 0`; \ - skip=`echo 4`; \ - echo "TAP version 13"; \ - for TEST in $(1); do \ - BASENAME_TEST=`basename $$TEST`; \ - test_num=`echo $$test_num+1 | bc`; \ - $(call RUN_TEST_PRINT_RESULT,$(TEST),$(BASENAME_TEST),$(test_num),$(skip)) \ - done; + @BASE_DIR="$(selfdir)"; \ + . $(selfdir)/kselftest/runner.sh; \ + if [ "X$(summary)" != "X" ]; then \ + per_test_logging=1; \ + fi; \ + run_many $(1) endef run_tests: all @@ -105,24 +103,12 @@ else $(error Error: set INSTALL_PATH to use install) endif -define EMIT_TESTS - @test_num=`echo 0`; \ +emit_tests: for TEST in $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(TEST_PROGS); do \ BASENAME_TEST=`basename $$TEST`; \ - test_num=`echo $$test_num+1 | bc`; \ - TEST_HDR_MSG="selftests: "`basename $$PWD`:" $$BASENAME_TEST"; \ - echo "echo $$TEST_HDR_MSG"; \ - if [ ! -x $$TEST ]; then \ - echo "echo \"$$TEST_HDR_MSG: Warning: file $$BASENAME_TEST is not executable, correct this.\""; \ - echo "echo \"not ok 1..$$test_num $$TEST_HDR_MSG [FAIL]\""; \ - else - echo "(./$$BASENAME_TEST >> \$$OUTPUT 2>&1 && echo \"ok 1..$$test_num $$TEST_HDR_MSG [PASS]\") || (if [ \$$? -eq \$$skip ]; then echo \"not ok 1..$$test_num $$TEST_HDR_MSG [SKIP]\"; else echo \"not ok 1..$$test_num $$TEST_HDR_MSG [FAIL]\"; fi;)"; \ - fi; \ - done; -endef - -emit_tests: - $(EMIT_TESTS) + echo " \\"; \ + echo -n " \"$$BASENAME_TEST\""; \ + done; \ # define if isn't already. It is undefined in make O= case. ifeq ($(RM),) diff --git a/tools/testing/selftests/lib/Makefile b/tools/testing/selftests/lib/Makefile index 70d5711e3ac8..a105f094676e 100644 --- a/tools/testing/selftests/lib/Makefile +++ b/tools/testing/selftests/lib/Makefile @@ -1,8 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only # Makefile for lib/ function selftests # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" all: -TEST_PROGS := printf.sh bitmap.sh prime_numbers.sh +TEST_PROGS := printf.sh bitmap.sh prime_numbers.sh strscpy.sh include ../lib.mk diff --git a/tools/testing/selftests/lib/bitmap.sh b/tools/testing/selftests/lib/bitmap.sh index 5a90006d1aea..5511dddc5c2d 100755 --- a/tools/testing/selftests/lib/bitmap.sh +++ b/tools/testing/selftests/lib/bitmap.sh @@ -1,19 +1,3 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - -# Runs bitmap infrastructure tests using test_bitmap kernel module -if ! /sbin/modprobe -q -n test_bitmap; then - echo "bitmap: module test_bitmap is not found [SKIP]" - exit $ksft_skip -fi - -if /sbin/modprobe -q test_bitmap; then - /sbin/modprobe -q -r test_bitmap - echo "bitmap: ok" -else - echo "bitmap: [FAIL]" - exit 1 -fi +$(dirname $0)/../kselftest_module.sh "bitmap" test_bitmap diff --git a/tools/testing/selftests/lib/config b/tools/testing/selftests/lib/config index 126933bcc950..14a77ea4a8da 100644 --- a/tools/testing/selftests/lib/config +++ b/tools/testing/selftests/lib/config @@ -1,3 +1,4 @@ CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m CONFIG_PRIME_NUMBERS=m +CONFIG_TEST_STRSCPY=m diff --git a/tools/testing/selftests/lib/prime_numbers.sh b/tools/testing/selftests/lib/prime_numbers.sh index 78e7483c8d60..43b28f24e453 100755 --- a/tools/testing/selftests/lib/prime_numbers.sh +++ b/tools/testing/selftests/lib/prime_numbers.sh @@ -1,19 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # Checks fast/slow prime_number generation for inconsistencies - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - -if ! /sbin/modprobe -q -n prime_numbers; then - echo "prime_numbers: module prime_numbers is not found [SKIP]" - exit $ksft_skip -fi - -if /sbin/modprobe -q prime_numbers selftest=65536; then - /sbin/modprobe -q -r prime_numbers - echo "prime_numbers: ok" -else - echo "prime_numbers: [FAIL]" - exit 1 -fi +$(dirname $0)/../kselftest_module.sh "prime numbers" prime_numbers selftest=65536 diff --git a/tools/testing/selftests/lib/printf.sh b/tools/testing/selftests/lib/printf.sh index 45a23e2d64ad..2ffa61da0296 100755 --- a/tools/testing/selftests/lib/printf.sh +++ b/tools/testing/selftests/lib/printf.sh @@ -1,19 +1,4 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 -# Runs printf infrastructure using test_printf kernel module - -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - -if ! /sbin/modprobe -q -n test_printf; then - echo "printf: module test_printf is not found [SKIP]" - exit $ksft_skip -fi - -if /sbin/modprobe -q test_printf; then - /sbin/modprobe -q -r test_printf - echo "printf: ok" -else - echo "printf: [FAIL]" - exit 1 -fi +# Tests the printf infrastructure using test_printf kernel module. +$(dirname $0)/../kselftest_module.sh "printf" test_printf diff --git a/tools/testing/selftests/lib/strscpy.sh b/tools/testing/selftests/lib/strscpy.sh new file mode 100755 index 000000000000..71f2be6afba6 --- /dev/null +++ b/tools/testing/selftests/lib/strscpy.sh @@ -0,0 +1,3 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ +$(dirname $0)/../kselftest_module.sh "strscpy*" test_strscpy diff --git a/tools/testing/selftests/livepatch/Makefile b/tools/testing/selftests/livepatch/Makefile index af4aee79bebb..fd405402c3ff 100644 --- a/tools/testing/selftests/livepatch/Makefile +++ b/tools/testing/selftests/livepatch/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -TEST_GEN_PROGS := \ +TEST_PROGS_EXTENDED := functions.sh +TEST_PROGS := \ test-livepatch.sh \ test-callbacks.sh \ test-shadow-vars.sh diff --git a/tools/testing/selftests/media_tests/media_dev_allocator.sh b/tools/testing/selftests/media_tests/media_dev_allocator.sh new file mode 100755 index 000000000000..ffe00c59a483 --- /dev/null +++ b/tools/testing/selftests/media_tests/media_dev_allocator.sh @@ -0,0 +1,85 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Media Device Allocator API test script +# Copyright (c) 2019 Shuah Khan <shuah@kernel.org> + +echo "Media Device Allocator testing: unbind and bind" +echo "media driver $1 audio driver $2" + +MDRIVER=/sys/bus/usb/drivers/$1 +cd $MDRIVER +MDEV=$(ls -d *\-*) + +ADRIVER=/sys/bus/usb/drivers/$2 +cd $ADRIVER +ADEV=$(ls -d *\-*.1) + +echo "==================================" +echo "Test unbind both devices - start" +echo "Running unbind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/unbind; + +echo "Media device should still be present!" +ls -l /dev/media* + +echo "sound driver is at: $ADRIVER" +echo "Device is: $ADEV" + +echo "Running unbind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/unbind; + +echo "Media device should have been deleted!" +ls -l /dev/media* +echo "Test unbind both devices - end" + +echo "==================================" + +echo "Test bind both devices - start" +echo "Running bind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/bind; + +echo "Media device should be present!" +ls -l /dev/media* + +echo "Running bind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/bind; + +echo "Media device should be there!" +ls -l /dev/media* + +echo "Test bind both devices - end" + +echo "==================================" + +echo "Test unbind $MDEV - bind $MDEV - unbind $ADEV - bind $ADEV start" + +echo "Running unbind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/unbind; + +echo "Media device should be there!" +ls -l /dev/media* + +sleep 1 + +echo "Running bind of $MDEV from $MDRIVER" +echo $MDEV > $MDRIVER/bind; + +echo "Media device should be there!" +ls -l /dev/media* + +echo "Running unbind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/unbind; + +echo "Media device should be there!" +ls -l /dev/media* + +sleep 1 + +echo "Running bind of $ADEV from $ADRIVER" +echo $ADEV > $ADRIVER/bind; + +echo "Media device should be there!" +ls -l /dev/media* + +echo "Test unbind $MDEV - bind $MDEV - unbind $ADEV - bind $ADEV end" +echo "==================================" diff --git a/tools/testing/selftests/membarrier/Makefile b/tools/testing/selftests/membarrier/Makefile index 02845532b059..97e3bdf3d1e9 100644 --- a/tools/testing/selftests/membarrier/Makefile +++ b/tools/testing/selftests/membarrier/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -g -I../../../../usr/include/ TEST_GEN_PROGS := membarrier_test diff --git a/tools/testing/selftests/membarrier/membarrier_test.c b/tools/testing/selftests/membarrier/membarrier_test.c index 6793f8ecc8e7..70b4ddbf126b 100644 --- a/tools/testing/selftests/membarrier/membarrier_test.c +++ b/tools/testing/selftests/membarrier/membarrier_test.c @@ -304,6 +304,7 @@ static int test_membarrier_query(void) int main(int argc, char **argv) { ksft_print_header(); + ksft_set_plan(13); test_membarrier_query(); test_membarrier(); diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config index e9c860d00416..474040448601 100644 --- a/tools/testing/selftests/net/config +++ b/tools/testing/selftests/net/config @@ -7,9 +7,7 @@ CONFIG_NET_L3_MASTER_DEV=y CONFIG_IPV6=y CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_VETH=y -CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_NET_IPVTI=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_IPV6_VTI=y CONFIG_DUMMY=y CONFIG_BRIDGE=y diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index d4cfb6a7a086..a93e6b690e06 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -15,6 +15,7 @@ GW_IP6=2001:db8:1::2 SRC_IP6=2001:db8:1::3 DEV_ADDR=192.51.100.1 +DEV_ADDR6=2001:db8:1::1 DEV=dummy0 log_test() @@ -27,6 +28,7 @@ log_test() nsuccess=$((nsuccess+1)) printf "\n TEST: %-50s [ OK ]\n" "${msg}" else + ret=1 nfail=$((nfail+1)) printf "\n TEST: %-50s [FAIL]\n" "${msg}" if [ "${PAUSE_ON_FAIL}" = "yes" ]; then @@ -54,8 +56,8 @@ setup() $IP link add dummy0 type dummy $IP link set dev dummy0 up - $IP address add 198.51.100.1/24 dev dummy0 - $IP -6 address add 2001:db8:1::1/64 dev dummy0 + $IP address add $DEV_ADDR/24 dev dummy0 + $IP -6 address add $DEV_ADDR6/64 dev dummy0 set +e } @@ -147,8 +149,8 @@ fib_rule6_test() fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then - match="ipproto icmp" - fib_rule6_test_match_n_redirect "$match" "$match" "ipproto icmp match" + match="ipproto ipv6-icmp" + fib_rule6_test_match_n_redirect "$match" "$match" "ipproto ipv6-icmp match" fi } @@ -185,8 +187,13 @@ fib_rule4_test() match="oif $DEV" fib_rule4_test_match_n_redirect "$match" "$match" "oif redirect to table" + # need enable forwarding and disable rp_filter temporarily as all the + # addresses are in the same subnet and egress device == ingress device. + ip netns exec testns sysctl -w net.ipv4.ip_forward=1 + ip netns exec testns sysctl -w net.ipv4.conf.$DEV.rp_filter=0 match="from $SRC_IP iif $DEV" fib_rule4_test_match_n_redirect "$match" "$match" "iif redirect to table" + ip netns exec testns sysctl -w net.ipv4.ip_forward=0 match="tos 0x10" fib_rule4_test_match_n_redirect "$match" "$match" "tos redirect to table" @@ -245,4 +252,9 @@ setup run_fibrule_tests cleanup +if [ "$TESTS" != "none" ]; then + printf "\nTests passed: %3d\n" ${nsuccess} + printf "Tests failed: %3d\n" ${nfail} +fi + exit $ret diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 1080ff55a788..9457aaeae092 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -9,7 +9,8 @@ ret=0 ksft_skip=4 # all tests in this script. Can be overridden with -t option -TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics" +TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw" + VERBOSE=0 PAUSE_ON_FAIL=no PAUSE=no @@ -48,6 +49,7 @@ setup() { set -e ip netns add ns1 + ip netns set ns1 auto $IP link set dev lo up ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1 ip netns exec ns1 sysctl -qw net.ipv6.conf.all.forwarding=1 @@ -605,6 +607,39 @@ run_cmd() return $rc } +check_expected() +{ + local out="$1" + local expected="$2" + local rc=0 + + [ "${out}" = "${expected}" ] && return 0 + + if [ -z "${out}" ]; then + if [ "$VERBOSE" = "1" ]; then + printf "\nNo route entry found\n" + printf "Expected:\n" + printf " ${expected}\n" + fi + return 1 + fi + + # tricky way to convert output to 1-line without ip's + # messy '\'; this drops all extra white space + out=$(echo ${out}) + if [ "${out}" != "${expected}" ]; then + rc=1 + if [ "${VERBOSE}" = "1" ]; then + printf " Unexpected route entry. Have:\n" + printf " ${out}\n" + printf " Expected:\n" + printf " ${expected}\n\n" + fi + fi + + return $rc +} + # add route for a prefix, flushing any existing routes first # expected to be the first step of a test add_route6() @@ -652,31 +687,7 @@ check_route6() pfx=$1 out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//') - [ "${out}" = "${expected}" ] && return 0 - - if [ -z "${out}" ]; then - if [ "$VERBOSE" = "1" ]; then - printf "\nNo route entry found\n" - printf "Expected:\n" - printf " ${expected}\n" - fi - return 1 - fi - - # tricky way to convert output to 1-line without ip's - # messy '\'; this drops all extra white space - out=$(echo ${out}) - if [ "${out}" != "${expected}" ]; then - rc=1 - if [ "${VERBOSE}" = "1" ]; then - printf " Unexpected route entry. Have:\n" - printf " ${out}\n" - printf " Expected:\n" - printf " ${expected}\n\n" - fi - fi - - return $rc + check_expected "${out}" "${expected}" } route_cleanup() @@ -698,6 +709,7 @@ route_setup() set -e ip netns add ns2 + ip netns set ns2 auto ip -netns ns2 link set dev lo up ip netns exec ns2 sysctl -qw net.ipv4.ip_forward=1 ip netns exec ns2 sysctl -qw net.ipv6.conf.all.forwarding=1 @@ -725,7 +737,7 @@ route_setup() ip -netns ns2 addr add 172.16.103.2/24 dev veth4 ip -netns ns2 addr add 172.16.104.1/24 dev dummy1 - set +ex + set +e } # assumption is that basic add of a single path route works @@ -960,7 +972,8 @@ ipv6_addr_metric_test() run_cmd "$IP li set dev dummy2 down" rc=$? if [ $rc -eq 0 ]; then - check_route6 "" + out=$($IP -6 ro ls match 2001:db8:104::/64) + check_expected "${out}" "" rc=$? fi log_test $rc 0 "Prefix route removed on link down" @@ -1091,38 +1104,13 @@ check_route() local pfx local expected="$1" local out - local rc=0 set -- $expected pfx=$1 [ "${pfx}" = "unreachable" ] && pfx=$2 out=$($IP ro ls match ${pfx}) - [ "${out}" = "${expected}" ] && return 0 - - if [ -z "${out}" ]; then - if [ "$VERBOSE" = "1" ]; then - printf "\nNo route entry found\n" - printf "Expected:\n" - printf " ${expected}\n" - fi - return 1 - fi - - # tricky way to convert output to 1-line without ip's - # messy '\'; this drops all extra white space - out=$(echo ${out}) - if [ "${out}" != "${expected}" ]; then - rc=1 - if [ "${VERBOSE}" = "1" ]; then - printf " Unexpected route entry. Have:\n" - printf " ${out}\n" - printf " Expected:\n" - printf " ${expected}\n\n" - fi - fi - - return $rc + check_expected "${out}" "${expected}" } # assumption is that basic add of a single path route works @@ -1387,7 +1375,8 @@ ipv4_addr_metric_test() run_cmd "$IP li set dev dummy2 down" rc=$? if [ $rc -eq 0 ]; then - check_route "" + out=$($IP ro ls match 172.16.104.0/24) + check_expected "${out}" "" rc=$? fi log_test $rc 0 "Prefix route removed on link down" @@ -1442,6 +1431,70 @@ ipv4_route_metrics_test() route_cleanup } +ipv4_route_v6_gw_test() +{ + local rc + + echo + echo "IPv4 route with IPv6 gateway tests" + + route_setup + sleep 2 + + # + # single path route + # + run_cmd "$IP ro add 172.16.104.0/24 via inet6 2001:db8:101::2" + rc=$? + log_test $rc 0 "Single path route with IPv6 gateway" + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 via inet6 2001:db8:101::2 dev veth1" + fi + + run_cmd "ip netns exec ns1 ping -w1 -c1 172.16.104.1" + log_test $rc 0 "Single path route with IPv6 gateway - ping" + + run_cmd "$IP ro del 172.16.104.0/24 via inet6 2001:db8:101::2" + rc=$? + log_test $rc 0 "Single path route delete" + if [ $rc -eq 0 ]; then + check_route "172.16.112.0/24" + fi + + # + # multipath - v6 then v4 + # + run_cmd "$IP ro add 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" + rc=$? + log_test $rc 0 "Multipath route add - v6 nexthop then v4" + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" + fi + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" + log_test $? 2 " Multipath route delete - nexthops in wrong order" + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" + log_test $? 0 " Multipath route delete exact match" + + # + # multipath - v4 then v6 + # + run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" + rc=$? + log_test $rc 0 "Multipath route add - v4 nexthop then v6" + if [ $rc -eq 0 ]; then + check_route "172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 weight 1 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1" + fi + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" + log_test $? 2 " Multipath route delete - nexthops in wrong order" + + run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" + log_test $? 0 " Multipath route delete exact match" + + route_cleanup +} ################################################################################ # usage @@ -1511,6 +1564,7 @@ do ipv4_addr_metric) ipv4_addr_metric_test;; ipv6_route_metrics) ipv6_route_metrics_test;; ipv4_route_metrics) ipv4_route_metrics_test;; + ipv4_route_v6_gw) ipv4_route_v6_gw_test;; help) echo "Test names: $TESTS"; exit 0;; esac diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh b/tools/testing/selftests/net/forwarding/bridge_igmp.sh new file mode 100755 index 000000000000..88d2472ba151 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh @@ -0,0 +1,152 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS="reportleave_test" +NUM_NETIFS=4 +CHECK_TC="yes" +TEST_GROUP="239.10.10.10" +TEST_GROUP_MAC="01:00:5e:0a:0a:0a" +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +switch_create() +{ + ip link add dev br0 type bridge mcast_snooping 1 mcast_querier 1 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +switch_destroy() +{ + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + # Always cleanup the mcast group + ip address del dev $h2 $TEST_GROUP/32 2>&1 1>/dev/null + + h2_destroy + h1_destroy + + vrf_cleanup +} + +# return 0 if the packet wasn't seen on host2_if or 1 if it was +mcast_packet_test() +{ + local mac=$1 + local ip=$2 + local host1_if=$3 + local host2_if=$4 + local seen=0 + + # Add an ACL on `host2_if` which will tell us whether the packet + # was received by it or not. + tc qdisc add dev $host2_if ingress + tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ + flower dst_mac $mac action drop + + $MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t udp "dp=4096,sp=2048" -q + sleep 1 + + tc -j -s filter show dev $host2_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + if [[ $? -eq 0 ]]; then + seen=1 + fi + + tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower + tc qdisc del dev $host2_if ingress + + return $seen +} + +reportleave_test() +{ + RET=0 + ip address add dev $h2 $TEST_GROUP/32 autojoin + check_err $? "Could not join $TEST_GROUP" + + sleep 5 + bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null + check_err $? "Report didn't create mdb entry for $TEST_GROUP" + + mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2 + check_fail $? "Traffic to $TEST_GROUP wasn't forwarded" + + log_test "IGMP report $TEST_GROUP" + + RET=0 + bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null + check_err $? "mdb entry for $TEST_GROUP is missing" + + ip address del dev $h2 $TEST_GROUP/32 + check_err $? "Could not leave $TEST_GROUP" + + sleep 5 + bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null + check_fail $? "Leave didn't delete mdb entry for $TEST_GROUP" + + mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2 + check_err $? "Traffic to $TEST_GROUP was forwarded without mdb entry" + + log_test "IGMP leave $TEST_GROUP" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh index 57cf8914910d..8553a67a2322 100644 --- a/tools/testing/selftests/net/forwarding/devlink_lib.sh +++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh @@ -2,21 +2,10 @@ # SPDX-License-Identifier: GPL-2.0 ############################################################################## -# Source library - -relative_path="${BASH_SOURCE%/*}" -if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then - relative_path="." -fi - -source "$relative_path/lib.sh" - -############################################################################## # Defines -DEVLINK_DEV=$(devlink port show | grep "${NETIFS[p1]}" | \ - grep -v "${NETIFS[p1]}[0-9]" | cut -d" " -f1 | \ - rev | cut -d"/" -f2- | rev) +DEVLINK_DEV=$(devlink port show "${NETIFS[p1]}" -j \ + | jq -r '.port | keys[]' | cut -d/ -f-2) if [ -z "$DEVLINK_DEV" ]; then echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it" exit 1 @@ -106,3 +95,98 @@ devlink_reload() grep -c "size_new") check_err $still_pending "Failed reload - There are still unset sizes" } + +declare -A DEVLINK_ORIG + +devlink_port_pool_threshold() +{ + local port=$1; shift + local pool=$1; shift + + devlink sb port pool show $port pool $pool -j \ + | jq '.port_pool."'"$port"'"[].threshold' +} + +devlink_port_pool_th_set() +{ + local port=$1; shift + local pool=$1; shift + local th=$1; shift + local key="port_pool($port,$pool).threshold" + + DEVLINK_ORIG[$key]=$(devlink_port_pool_threshold $port $pool) + devlink sb port pool set $port pool $pool th $th +} + +devlink_port_pool_th_restore() +{ + local port=$1; shift + local pool=$1; shift + local key="port_pool($port,$pool).threshold" + + devlink sb port pool set $port pool $pool th ${DEVLINK_ORIG[$key]} +} + +devlink_pool_size_thtype() +{ + local pool=$1; shift + + devlink sb pool show "$DEVLINK_DEV" pool $pool -j \ + | jq -r '.pool[][] | (.size, .thtype)' +} + +devlink_pool_size_thtype_set() +{ + local pool=$1; shift + local thtype=$1; shift + local size=$1; shift + local key="pool($pool).size_thtype" + + DEVLINK_ORIG[$key]=$(devlink_pool_size_thtype $pool) + devlink sb pool set "$DEVLINK_DEV" pool $pool size $size thtype $thtype +} + +devlink_pool_size_thtype_restore() +{ + local pool=$1; shift + local key="pool($pool).size_thtype" + local -a orig=(${DEVLINK_ORIG[$key]}) + + devlink sb pool set "$DEVLINK_DEV" pool $pool \ + size ${orig[0]} thtype ${orig[1]} +} + +devlink_tc_bind_pool_th() +{ + local port=$1; shift + local tc=$1; shift + local dir=$1; shift + + devlink sb tc bind show $port tc $tc type $dir -j \ + | jq -r '.tc_bind[][] | (.pool, .threshold)' +} + +devlink_tc_bind_pool_th_set() +{ + local port=$1; shift + local tc=$1; shift + local dir=$1; shift + local pool=$1; shift + local th=$1; shift + local key="tc_bind($port,$dir,$tc).pool_th" + + DEVLINK_ORIG[$key]=$(devlink_tc_bind_pool_th $port $tc $dir) + devlink sb tc bind set $port tc $tc type $dir pool $pool th $th +} + +devlink_tc_bind_pool_th_restore() +{ + local port=$1; shift + local tc=$1; shift + local dir=$1; shift + local key="tc_bind($port,$dir,$tc).pool_th" + local -a orig=(${DEVLINK_ORIG[$key]}) + + devlink sb tc bind set $port tc $tc type $dir \ + pool ${orig[0]} th ${orig[1]} +} diff --git a/tools/testing/selftests/net/forwarding/loopback.sh b/tools/testing/selftests/net/forwarding/loopback.sh new file mode 100755 index 000000000000..6e4626ae71b0 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/loopback.sh @@ -0,0 +1,94 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS="loopback_test" +NUM_NETIFS=2 +source tc_common.sh +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + tc qdisc add dev $h1 clsact +} + +h1_destroy() +{ + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +loopback_test() +{ + RET=0 + + tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \ + skip_hw arp_op reply arp_tip 192.0.2.1 action drop + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_fail $? "Matched on a filter without loopback setup" + + ethtool -K $h1 loopback on + check_err $? "Failed to enable loopback" + + setup_wait_dev $h1 + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_err $? "Did not match on filter with loopback" + + ethtool -K $h1 loopback off + check_err $? "Failed to disable loopback" + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 2 + check_fail $? "Matched on a filter after loopback was removed" + + tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower + + log_test "loopback" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/router_multicast.sh b/tools/testing/selftests/net/forwarding/router_multicast.sh index 109e6d785169..57e90c873a2c 100755 --- a/tools/testing/selftests/net/forwarding/router_multicast.sh +++ b/tools/testing/selftests/net/forwarding/router_multicast.sh @@ -28,7 +28,7 @@ # +------------------+ +------------------+ # -ALL_TESTS="mcast_v4 mcast_v6" +ALL_TESTS="mcast_v4 mcast_v6 rpf_v4 rpf_v6" NUM_NETIFS=6 source lib.sh source tc_common.sh @@ -46,10 +46,14 @@ h1_create() ip route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::1 ip route add 2001:db8:3::/64 vrf v$h1 nexthop via 2001:db8:1::1 + + tc qdisc add dev $h1 ingress } h1_destroy() { + tc qdisc del dev $h1 ingress + ip route del 2001:db8:3::/64 vrf v$h1 ip route del 2001:db8:2::/64 vrf v$h1 @@ -124,10 +128,14 @@ router_create() ip address add 2001:db8:1::1/64 dev $rp1 ip address add 2001:db8:2::1/64 dev $rp2 ip address add 2001:db8:3::1/64 dev $rp3 + + tc qdisc add dev $rp3 ingress } router_destroy() { + tc qdisc del dev $rp3 ingress + ip address del 2001:db8:3::1/64 dev $rp3 ip address del 2001:db8:2::1/64 dev $rp2 ip address del 2001:db8:1::1/64 dev $rp1 @@ -301,6 +309,103 @@ mcast_v6() log_test "mcast IPv6" } +rpf_v4() +{ + # Add a multicast route from first router port to the other two. Send + # matching packets and test that both hosts receive them. Then, send + # the same packets via the third router port and test that they do not + # reach any host due to RPF check. A filter with 'skip_hw' is added to + # test that devices capable of multicast routing offload trap those + # packets. The filter is essentialy a NOP in other scenarios. + + RET=0 + + tc filter add dev $h1 ingress protocol ip pref 1 handle 1 flower \ + dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop + tc filter add dev $h2 ingress protocol ip pref 1 handle 1 flower \ + dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop + tc filter add dev $h3 ingress protocol ip pref 1 handle 1 flower \ + dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop + tc filter add dev $rp3 ingress protocol ip pref 1 handle 1 flower \ + skip_hw dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action pass + + create_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3 + + $MZ $h1 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \ + -a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \ + -A 198.51.100.2 -B 225.1.2.3 -q + + tc_check_packets "dev $h2 ingress" 1 5 + check_err $? "Multicast not received on first host" + tc_check_packets "dev $h3 ingress" 1 5 + check_err $? "Multicast not received on second host" + + $MZ $h3 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \ + -a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \ + -A 198.51.100.2 -B 225.1.2.3 -q + + tc_check_packets "dev $h1 ingress" 1 0 + check_err $? "Multicast received on first host when should not" + tc_check_packets "dev $h2 ingress" 1 5 + check_err $? "Multicast received on second host when should not" + tc_check_packets "dev $rp3 ingress" 1 5 + check_err $? "Packets not trapped due to RPF check" + + delete_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3 + + tc filter del dev $rp3 ingress protocol ip pref 1 handle 1 flower + tc filter del dev $h3 ingress protocol ip pref 1 handle 1 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 1 flower + tc filter del dev $h1 ingress protocol ip pref 1 handle 1 flower + + log_test "RPF IPv4" +} + +rpf_v6() +{ + RET=0 + + tc filter add dev $h1 ingress protocol ipv6 pref 1 handle 1 flower \ + dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop + tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 1 flower \ + dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop + tc filter add dev $h3 ingress protocol ipv6 pref 1 handle 1 flower \ + dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop + tc filter add dev $rp3 ingress protocol ipv6 pref 1 handle 1 flower \ + skip_hw dst_ip ff0e::3 ip_proto udp dst_port 12345 action pass + + create_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3 + + $MZ $h1 -6 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \ + -a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \ + -A 2001:db8:1::2 -B ff0e::3 -q + + tc_check_packets "dev $h2 ingress" 1 5 + check_err $? "Multicast not received on first host" + tc_check_packets "dev $h3 ingress" 1 5 + check_err $? "Multicast not received on second host" + + $MZ $h3 -6 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \ + -a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \ + -A 2001:db8:1::2 -B ff0e::3 -q + + tc_check_packets "dev $h1 ingress" 1 0 + check_err $? "Multicast received on first host when should not" + tc_check_packets "dev $h2 ingress" 1 5 + check_err $? "Multicast received on second host when should not" + tc_check_packets "dev $rp3 ingress" 1 5 + check_err $? "Packets not trapped due to RPF check" + + delete_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3 + + tc filter del dev $rp3 ingress protocol ipv6 pref 1 handle 1 flower + tc filter del dev $h3 ingress protocol ipv6 pref 1 handle 1 flower + tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 1 flower + tc filter del dev $h1 ingress protocol ipv6 pref 1 handle 1 flower + + log_test "RPF IPv6" +} + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/net/forwarding/tc_flower.sh b/tools/testing/selftests/net/forwarding/tc_flower.sh index 20d1077e5a3d..29bcfa84aec7 100755 --- a/tools/testing/selftests/net/forwarding/tc_flower.sh +++ b/tools/testing/selftests/net/forwarding/tc_flower.sh @@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 ALL_TESTS="match_dst_mac_test match_src_mac_test match_dst_ip_test \ - match_src_ip_test match_ip_flags_test" + match_src_ip_test match_ip_flags_test match_pcp_test match_vlan_test" NUM_NETIFS=2 source tc_common.sh source lib.sh @@ -219,6 +219,63 @@ match_ip_flags_test() log_test "ip_flags match ($tcflags)" } +match_pcp_test() +{ + RET=0 + + vlan_create $h2 85 v$h2 192.0.2.11/24 + + tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \ + flower vlan_prio 6 $tcflags dst_mac $h2mac action drop + tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \ + flower vlan_prio 7 $tcflags dst_mac $h2mac action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 7:85 -t ip -q + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q + + tc_check_packets "dev $h2 ingress" 101 0 + check_err $? "Matched on specified PCP when should not" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on specified PCP" + + tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower + + vlan_destroy $h2 85 + + log_test "PCP match ($tcflags)" +} + +match_vlan_test() +{ + RET=0 + + vlan_create $h2 85 v$h2 192.0.2.11/24 + vlan_create $h2 75 v$h2 192.0.2.10/24 + + tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \ + flower vlan_id 75 $tcflags action drop + tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \ + flower vlan_id 85 $tcflags action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q + + tc_check_packets "dev $h2 ingress" 101 0 + check_err $? "Matched on specified VLAN when should not" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on specified VLAN" + + tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower + + vlan_destroy $h2 75 + vlan_destroy $h2 85 + + log_test "VLAN match ($tcflags)" +} + setup_prepare() { h1=${NETIFS[p1]} diff --git a/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh b/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh new file mode 100755 index 000000000000..45378905cb97 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh @@ -0,0 +1,164 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + vlan_modify_ingress + vlan_modify_egress +" + +NUM_NETIFS=4 +CHECK_TC="yes" +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64 + vlan_create $h1 85 v$h1 192.0.2.17/28 2001:db8:2::1/64 +} + +h1_destroy() +{ + vlan_destroy $h1 85 + simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64 + vlan_create $h2 65 v$h2 192.0.2.18/28 2001:db8:2::2/64 +} + +h2_destroy() +{ + vlan_destroy $h2 65 + simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up + + bridge vlan add dev $swp1 vid 85 + bridge vlan add dev $swp2 vid 65 + + bridge vlan add dev $swp2 vid 85 + bridge vlan add dev $swp1 vid 65 + + tc qdisc add dev $swp1 clsact + tc qdisc add dev $swp2 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp2 clsact + tc qdisc del dev $swp1 clsact + + bridge vlan del vid 65 dev $swp1 + bridge vlan del vid 85 dev $swp2 + + bridge vlan del vid 65 dev $swp2 + bridge vlan del vid 85 dev $swp1 + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +vlan_modify_ingress() +{ + RET=0 + + ping_do $h1.85 192.0.2.18 + check_fail $? "ping between two different vlans passed when should not" + + ping6_do $h1.85 2001:db8:2::2 + check_fail $? "ping6 between two different vlans passed when should not" + + tc filter add dev $swp1 ingress protocol all pref 1 handle 1 \ + flower action vlan modify id 65 + tc filter add dev $swp2 ingress protocol all pref 1 handle 1 \ + flower action vlan modify id 85 + + ping_do $h1.85 192.0.2.18 + check_err $? "ping between two different vlans failed when should not" + + ping6_do $h1.85 2001:db8:2::2 + check_err $? "ping6 between two different vlans failed when should not" + + log_test "VLAN modify at ingress" + + tc filter del dev $swp2 ingress protocol all pref 1 handle 1 flower + tc filter del dev $swp1 ingress protocol all pref 1 handle 1 flower +} + +vlan_modify_egress() +{ + RET=0 + + ping_do $h1.85 192.0.2.18 + check_fail $? "ping between two different vlans passed when should not" + + ping6_do $h1.85 2001:db8:2::2 + check_fail $? "ping6 between two different vlans passed when should not" + + tc filter add dev $swp1 egress protocol all pref 1 handle 1 \ + flower action vlan modify id 85 + tc filter add dev $swp2 egress protocol all pref 1 handle 1 \ + flower action vlan modify id 65 + + ping_do $h1.85 192.0.2.18 + check_err $? "ping between two different vlans failed when should not" + + ping6_do $h1.85 2001:db8:2::2 + check_err $? "ping6 between two different vlans failed when should not" + + log_test "VLAN modify at egress" + + tc filter del dev $swp2 egress protocol all pref 1 handle 1 flower + tc filter del dev $swp1 egress protocol all pref 1 handle 1 flower +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index 912b2dc50be3..b9171a7b3aaa 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -116,6 +116,10 @@ # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +PAUSE_ON_FAIL=no +VERBOSE=0 +TRACING=0 + # Some systems don't have a ping6 binary anymore which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) @@ -222,6 +226,23 @@ err_flush() { err_buf= } +run_cmd() { + cmd="$*" + + if [ "$VERBOSE" = "1" ]; then + printf " COMMAND: $cmd\n" + fi + + out="$($cmd 2>&1)" + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + echo + fi + + return $rc +} + # Find the auto-generated name for this namespace nsname() { eval echo \$NS_$1 @@ -258,22 +279,22 @@ setup_fou_or_gue() { fi fi - ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2 - ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2 + run_cmd ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2 + run_cmd ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2 - ${ns_b} ip fou add port 5556 ipproto ${ipproto} - ${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555 + run_cmd ${ns_b} ip fou add port 5556 ipproto ${ipproto} + run_cmd ${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555 if [ "${inner}" = "4" ]; then - ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a - ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b + run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a + run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b else - ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a - ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b + run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a + run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b fi - ${ns_a} ip link set ${encap}_a up - ${ns_b} ip link set ${encap}_b up + run_cmd ${ns_a} ip link set ${encap}_a up + run_cmd ${ns_b} ip link set ${encap}_b up } setup_fou44() { @@ -319,17 +340,17 @@ setup_namespaces() { } setup_veth() { - ${ns_a} ip link add veth_a type veth peer name veth_b || return 1 - ${ns_a} ip link set veth_b netns ${NS_B} + run_cmd ${ns_a} ip link add veth_a type veth peer name veth_b || return 1 + run_cmd ${ns_a} ip link set veth_b netns ${NS_B} - ${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a - ${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b + run_cmd ${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a + run_cmd ${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b - ${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a - ${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b + run_cmd ${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a + run_cmd ${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b - ${ns_a} ip link set veth_a up - ${ns_b} ip link set veth_b up + run_cmd ${ns_a} ip link set veth_a up + run_cmd ${ns_b} ip link set veth_b up } setup_vti() { @@ -342,14 +363,14 @@ setup_vti() { [ ${proto} -eq 6 ] && vti_type="vti6" || vti_type="vti" - ${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1 - ${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10 + run_cmd ${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1 + run_cmd ${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10 - ${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a - ${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b + run_cmd ${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a + run_cmd ${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b - ${ns_a} ip link set vti${proto}_a up - ${ns_b} ip link set vti${proto}_b up + run_cmd ${ns_a} ip link set vti${proto}_a up + run_cmd ${ns_b} ip link set vti${proto}_b up } setup_vti4() { @@ -375,17 +396,17 @@ setup_vxlan_or_geneve() { opts_b="" fi - ${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1 - ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} + run_cmd ${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1 + run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} - ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a - ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b + run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a + run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b - ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a - ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b + run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a + run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b - ${ns_a} ip link set ${type}_a up - ${ns_b} ip link set ${type}_b up + run_cmd ${ns_a} ip link set ${type}_a up + run_cmd ${ns_b} ip link set ${type}_b up } setup_geneve4() { @@ -409,15 +430,15 @@ setup_xfrm() { veth_a_addr="${2}" veth_b_addr="${3}" - ${ns_a} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1 - ${ns_a} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel - ${ns_a} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel - ${ns_a} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel + run_cmd ${ns_a} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1 + run_cmd ${ns_a} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + run_cmd ${ns_a} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel + run_cmd ${ns_a} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel - ${ns_b} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel - ${ns_b} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead "rfc4106(gcm(aes))" 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel - ${ns_b} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel - ${ns_b} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel + run_cmd ${ns_b} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + run_cmd ${ns_b} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + run_cmd ${ns_b} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel + run_cmd ${ns_b} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel } setup_xfrm4() { @@ -481,7 +502,7 @@ setup() { } trace() { - [ $tracing -eq 0 ] && return + [ $TRACING -eq 0 ] && return for arg do [ "${ns_cmd}" = "" ] && ns_cmd="${arg}" && continue @@ -597,8 +618,8 @@ test_pmtu_ipvX() { mtu "${ns_b}" veth_B-R2 1500 # Create route exceptions - ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} > /dev/null - ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} > /dev/null + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} # Check that exceptions have been created with the correct PMTU pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" @@ -630,7 +651,7 @@ test_pmtu_ipvX() { # Decrease remote MTU on path via R2, get new exception mtu "${ns_r2}" veth_R2-B 400 mtu "${ns_b}" veth_B-R2 400 - ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 @@ -647,7 +668,7 @@ test_pmtu_ipvX() { check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1 # Get new exception - ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 } @@ -696,7 +717,7 @@ test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() { mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000)) mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) - ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} # Check that exception was created pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" @@ -776,7 +797,7 @@ test_pmtu_ipvX_over_fouY_or_gueY() { mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000)) mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000)) - ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} # Check that exception was created pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" @@ -834,13 +855,13 @@ test_pmtu_vti4_exception() { # Send DF packet without exceeding link layer MTU, check that no # exception is created - ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null + run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr} pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1 # Now exceed link layer MTU by one byte, check that exception is created # with the right PMTU value - ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null + run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr} pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))" } @@ -856,7 +877,7 @@ test_pmtu_vti6_exception() { mtu "${ns_b}" veth_b 4000 mtu "${ns_a}" vti6_a 5000 mtu "${ns_b}" vti6_b 5000 - ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr} > /dev/null + run_cmd ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr} # Check that exception was created pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" @@ -902,9 +923,9 @@ test_pmtu_vti6_default_mtu() { test_pmtu_vti4_link_add_mtu() { setup namespaces || return 2 - ${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 + run_cmd ${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 [ $? -ne 0 ] && err " vti not supported" && return 2 - ${ns_a} ip link del vti4_a + run_cmd ${ns_a} ip link del vti4_a fail=0 @@ -912,7 +933,7 @@ test_pmtu_vti4_link_add_mtu() { max=$((65535 - 20)) # Check invalid values first for v in $((min - 1)) $((max + 1)); do - ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 2>/dev/null + run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 # This can fail, or MTU can be adjusted to a proper value [ $? -ne 0 ] && continue mtu="$(link_get_mtu "${ns_a}" vti4_a)" @@ -920,14 +941,14 @@ test_pmtu_vti4_link_add_mtu() { err " vti tunnel created with invalid MTU ${mtu}" fail=1 fi - ${ns_a} ip link del vti4_a + run_cmd ${ns_a} ip link del vti4_a done # Now check valid values for v in ${min} 1300 ${max}; do - ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 + run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 mtu="$(link_get_mtu "${ns_a}" vti4_a)" - ${ns_a} ip link del vti4_a + run_cmd ${ns_a} ip link del vti4_a if [ "${mtu}" != "${v}" ]; then err " vti MTU ${mtu} doesn't match configured value ${v}" fail=1 @@ -940,9 +961,9 @@ test_pmtu_vti4_link_add_mtu() { test_pmtu_vti6_link_add_mtu() { setup namespaces || return 2 - ${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 + run_cmd ${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 [ $? -ne 0 ] && err " vti6 not supported" && return 2 - ${ns_a} ip link del vti6_a + run_cmd ${ns_a} ip link del vti6_a fail=0 @@ -950,7 +971,7 @@ test_pmtu_vti6_link_add_mtu() { max=$((65535 - 40)) # Check invalid values first for v in $((min - 1)) $((max + 1)); do - ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 2>/dev/null + run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 # This can fail, or MTU can be adjusted to a proper value [ $? -ne 0 ] && continue mtu="$(link_get_mtu "${ns_a}" vti6_a)" @@ -958,14 +979,14 @@ test_pmtu_vti6_link_add_mtu() { err " vti6 tunnel created with invalid MTU ${v}" fail=1 fi - ${ns_a} ip link del vti6_a + run_cmd ${ns_a} ip link del vti6_a done # Now check valid values for v in 68 1280 1300 $((65535 - 40)); do - ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 + run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 mtu="$(link_get_mtu "${ns_a}" vti6_a)" - ${ns_a} ip link del vti6_a + run_cmd ${ns_a} ip link del vti6_a if [ "${mtu}" != "${v}" ]; then err " vti6 MTU ${mtu} doesn't match configured value ${v}" fail=1 @@ -978,19 +999,19 @@ test_pmtu_vti6_link_add_mtu() { test_pmtu_vti6_link_change_mtu() { setup namespaces || return 2 - ${ns_a} ip link add dummy0 mtu 1500 type dummy + run_cmd ${ns_a} ip link add dummy0 mtu 1500 type dummy [ $? -ne 0 ] && err " dummy not supported" && return 2 - ${ns_a} ip link add dummy1 mtu 3000 type dummy - ${ns_a} ip link set dummy0 up - ${ns_a} ip link set dummy1 up + run_cmd ${ns_a} ip link add dummy1 mtu 3000 type dummy + run_cmd ${ns_a} ip link set dummy0 up + run_cmd ${ns_a} ip link set dummy1 up - ${ns_a} ip addr add ${dummy6_0_addr}/${dummy6_mask} dev dummy0 - ${ns_a} ip addr add ${dummy6_1_addr}/${dummy6_mask} dev dummy1 + run_cmd ${ns_a} ip addr add ${dummy6_0_addr}/${dummy6_mask} dev dummy0 + run_cmd ${ns_a} ip addr add ${dummy6_1_addr}/${dummy6_mask} dev dummy1 fail=0 # Create vti6 interface bound to device, passing MTU, check it - ${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr} + run_cmd ${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr} mtu="$(link_get_mtu "${ns_a}" vti6_a)" if [ ${mtu} -ne 1300 ]; then err " vti6 MTU ${mtu} doesn't match configured value 1300" @@ -999,7 +1020,7 @@ test_pmtu_vti6_link_change_mtu() { # Move to another device with different MTU, without passing MTU, check # MTU is adjusted - ${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_addr} local ${dummy6_1_addr} + run_cmd ${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_addr} local ${dummy6_1_addr} mtu="$(link_get_mtu "${ns_a}" vti6_a)" if [ ${mtu} -ne $((3000 - 40)) ]; then err " vti MTU ${mtu} is not dummy MTU 3000 minus IPv6 header length" @@ -1007,7 +1028,7 @@ test_pmtu_vti6_link_change_mtu() { fi # Move it back, passing MTU, check MTU is not overridden - ${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr} + run_cmd ${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_addr} local ${dummy6_0_addr} mtu="$(link_get_mtu "${ns_a}" vti6_a)" if [ ${mtu} -ne 1280 ]; then err " vti6 MTU ${mtu} doesn't match configured value 1280" @@ -1052,7 +1073,7 @@ test_cleanup_vxlanX_exception() { # Fill exception cache for multiple CPUs (2) # we can always use inner IPv4 for that for cpu in ${cpu_list}; do - taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} > /dev/null + run_cmd taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} done ${ns_a} ip link del dev veth_A-R1 & @@ -1084,29 +1105,33 @@ usage() { exit 1 } +################################################################################ +# exitcode=0 desc=0 + +while getopts :ptv o +do + case $o in + p) PAUSE_ON_FAIL=yes;; + v) VERBOSE=1;; + t) if which tcpdump > /dev/null 2>&1; then + TRACING=1 + else + echo "=== tcpdump not available, tracing disabled" + fi + ;; + *) usage;; + esac +done +shift $(($OPTIND-1)) + IFS=" " -tracing=0 for arg do - if [ "${arg}" != "${arg#--*}" ]; then - opt="${arg#--}" - if [ "${opt}" = "trace" ]; then - if which tcpdump > /dev/null 2>&1; then - tracing=1 - else - echo "=== tcpdump not available, tracing disabled" - fi - else - usage - fi - else - # Check first that all requested tests are available before - # running any - command -v > /dev/null "test_${arg}" || { echo "=== Test ${arg} not found"; usage; } - fi + # Check first that all requested tests are available before running any + command -v > /dev/null "test_${arg}" || { echo "=== Test ${arg} not found"; usage; } done trap cleanup EXIT @@ -1124,6 +1149,11 @@ for t in ${tests}; do ( unset IFS + + if [ "$VERBOSE" = "1" ]; then + printf "\n##########################################################################\n\n" + fi + eval test_${name} ret=$? cleanup @@ -1132,6 +1162,11 @@ for t in ${tests}; do printf "TEST: %-60s [ OK ]\n" "${t}" elif [ $ret -eq 1 ]; then printf "TEST: %-60s [FAIL]\n" "${t}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "Pausing. Hit enter to continue" + read a + fi err_flush exit 1 elif [ $ret -eq 2 ]; then diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index b447803f3f8a..b25c9fe019d2 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -696,9 +696,9 @@ kci_test_ipsec_offload() algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" srcip=192.168.123.3 dstip=192.168.123.4 - dev=simx1 - sysfsd=/sys/kernel/debug/netdevsim/$dev + sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/ sysfsf=$sysfsd/ipsec + sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/ # setup netdevsim since dummydev doesn't have offload support modprobe netdevsim @@ -708,7 +708,11 @@ kci_test_ipsec_offload() return 1 fi - ip link add $dev type netdevsim + echo "0" > /sys/bus/netdevsim/new_device + while [ ! -d $sysfsnet ] ; do :; done + udevadm settle + dev=`ls $sysfsnet` + ip addr add $srcip dev $dev ip link set $dev up if [ ! -d $sysfsd ] ; then @@ -781,7 +785,6 @@ EOF fi # clean up any leftovers - ip link del $dev rmmod netdevsim if [ $ret -ne 0 ]; then diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests index 2dc95fda7ef7..ea5938ec009a 100755 --- a/tools/testing/selftests/net/run_afpackettests +++ b/tools/testing/selftests/net/run_afpackettests @@ -6,12 +6,14 @@ if [ $(id -u) != 0 ]; then exit 0 fi +ret=0 echo "--------------------" echo "running psock_fanout test" echo "--------------------" ./in_netns.sh ./psock_fanout if [ $? -ne 0 ]; then echo "[FAIL]" + ret=1 else echo "[PASS]" fi @@ -22,6 +24,7 @@ echo "--------------------" ./in_netns.sh ./psock_tpacket if [ $? -ne 0 ]; then echo "[FAIL]" + ret=1 else echo "[PASS]" fi @@ -32,6 +35,8 @@ echo "--------------------" ./in_netns.sh ./txring_overwrite if [ $? -ne 0 ]; then echo "[FAIL]" + ret=1 else echo "[PASS]" fi +exit $ret diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests index b093f39c298c..14e41faf2c57 100755 --- a/tools/testing/selftests/net/run_netsocktests +++ b/tools/testing/selftests/net/run_netsocktests @@ -7,7 +7,7 @@ echo "--------------------" ./socket if [ $? -ne 0 ]; then echo "[FAIL]" + exit 1 else echo "[PASS]" fi - diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index c9ff2b47bd1c..3e6d1bcc2894 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh nft_nat.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \ + conntrack_icmp_related.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/bridge_brouter.sh b/tools/testing/selftests/netfilter/bridge_brouter.sh new file mode 100755 index 000000000000..29f3955b9af7 --- /dev/null +++ b/tools/testing/selftests/netfilter/bridge_brouter.sh @@ -0,0 +1,146 @@ +#!/bin/bash +# +# This test is for bridge 'brouting', i.e. make some packets being routed +# rather than getting bridged even though they arrive on interface that is +# part of a bridge. + +# eth0 br0 eth0 +# setup is: ns1 <-> ns0 <-> ns2 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +ebtables -V > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ebtables" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ns0 +ip netns add ns1 +ip netns add ns2 + +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +if [ $? -ne 0 ]; then + echo "SKIP: Can't create veth device" + exit $ksft_skip +fi +ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 + +ip -net ns0 link set lo up +ip -net ns0 link set veth0 up +ip -net ns0 link set veth1 up + +ip -net ns0 link add br0 type bridge +if [ $? -ne 0 ]; then + echo "SKIP: Can't create bridge br0" + exit $ksft_skip +fi + +ip -net ns0 link set veth0 master br0 +ip -net ns0 link set veth1 master br0 +ip -net ns0 link set br0 up +ip -net ns0 addr add 10.0.0.1/24 dev br0 + +# place both in same subnet, ns1 and ns2 connected via ns0:br0 +for i in 1 2; do + ip -net ns$i link set lo up + ip -net ns$i link set eth0 up + ip -net ns$i addr add 10.0.0.1$i/24 dev eth0 +done + +test_ebtables_broute() +{ + local cipt + + # redirect is needed so the dstmac is rewritten to the bridge itself, + # ip stack won't process OTHERHOST (foreign unicast mac) packets. + ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP + if [ $? -ne 0 ]; then + echo "SKIP: Could not add ebtables broute redirect rule" + return $ksft_skip + fi + + # ping netns1, expected to not work (ip forwarding is off) + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1 + if [ $? -eq 0 ]; then + echo "ERROR: ping works, should have failed" 1>&2 + return 1 + fi + + # enable forwarding on both interfaces. + # neither needs an ip address, but at least the bridge needs + # an ip address in same network segment as ns1 and ns2 (ns0 + # needs to be able to determine route for to-be-forwarded packet). + ip netns exec ns0 sysctl -q net.ipv4.conf.veth0.forwarding=1 + ip netns exec ns0 sysctl -q net.ipv4.conf.veth1.forwarding=1 + + sleep 1 + + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null + if [ $? -ne 0 ]; then + echo "ERROR: ping did not work, but it should (broute+forward)" 1>&2 + return 1 + fi + + echo "PASS: ns1/ns2 connectivity with active broute rule" + ip netns exec ns0 ebtables -t broute -F + + # ping netns1, expected to work (frames are bridged) + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null + if [ $? -ne 0 ]; then + echo "ERROR: ping did not work, but it should (bridged)" 1>&2 + return 1 + fi + + ip netns exec ns0 ebtables -t filter -A FORWARD -p ipv4 --ip-protocol icmp -j DROP + + # ping netns1, expected to not work (DROP in bridge forward) + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1 + if [ $? -eq 0 ]; then + echo "ERROR: ping works, should have failed (icmp forward drop)" 1>&2 + return 1 + fi + + # re-activate brouter + ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP + + ip netns exec ns2 ping -q -c 1 10.0.0.11 > /dev/null + if [ $? -ne 0 ]; then + echo "ERROR: ping did not work, but it should (broute+forward 2)" 1>&2 + return 1 + fi + + echo "PASS: ns1/ns2 connectivity with active broute rule and bridge forward drop" + return 0 +} + +# test basic connectivity +ip netns exec ns1 ping -c 1 -q 10.0.0.12 > /dev/null +if [ $? -ne 0 ]; then + echo "ERROR: Could not reach ns2 from ns1" 1>&2 + ret=1 +fi + +ip netns exec ns2 ping -c 1 -q 10.0.0.11 > /dev/null +if [ $? -ne 0 ]; then + echo "ERROR: Could not reach ns1 from ns2" 1>&2 + ret=1 +fi + +if [ $ret -eq 0 ];then + echo "PASS: netns connectivity: ns1 and ns2 can reach each other" +fi + +test_ebtables_broute +ret=$? +for i in 0 1 2; do ip netns del ns$i;done + +exit $ret diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh new file mode 100755 index 000000000000..b48e1833bc89 --- /dev/null +++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# +# check that ICMP df-needed/pkttoobig icmp are set are set as related +# state +# +# Setup is: +# +# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2 +# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280). +# ping nsclient2 from nsclient1, checking that conntrack did set RELATED +# 'fragmentation needed' icmp packet. +# +# In addition, nsrouter1 will perform IP masquerading, i.e. also +# check the icmp errors are propagated to the correct host as per +# nat of "established" icmp-echo "connection". + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +cleanup() { + for i in 1 2;do ip netns del nsclient$i;done + for i in 1 2;do ip netns del nsrouter$i;done +} + +ipv4() { + echo -n 192.168.$1.2 +} + +ipv6 () { + echo -n dead:$1::2 +} + +check_counter() +{ + ns=$1 + name=$2 + expect=$3 + local lret=0 + + cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect") + if [ $? -ne 0 ]; then + echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2 + ip netns exec $ns nft list counter inet filter "$name" 1>&2 + lret=1 + fi + + return $lret +} + +check_unknown() +{ + expect="packets 0 bytes 0" + for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + check_counter $n "unknown" "$expect" + if [ $? -ne 0 ] ;then + return 1 + fi + done + + return 0 +} + +for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do + ip netns add $n + ip -net $n link set lo up +done + +DEV=veth0 +ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1 +DEV=veth0 +ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2 + +DEV=veth0 +ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2 + +DEV=veth0 +for i in 1 2; do + ip -net nsclient$i link set $DEV up + ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV + ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV +done + +ip -net nsrouter1 link set eth1 up +ip -net nsrouter1 link set veth0 up + +ip -net nsrouter2 link set eth1 up +ip -net nsrouter2 link set eth2 up + +ip -net nsclient1 route add default via 192.168.1.1 +ip -net nsclient1 -6 route add default via dead:1::1 + +ip -net nsclient2 route add default via 192.168.2.1 +ip -net nsclient2 route add default via dead:2::1 + +i=3 +ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1 +ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0 +ip -net nsrouter1 addr add dead:1::1/64 dev eth1 +ip -net nsrouter1 addr add dead:3::1/64 dev veth0 +ip -net nsrouter1 route add default via 192.168.3.10 +ip -net nsrouter1 -6 route add default via dead:3::10 + +ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1 +ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2 +ip -net nsrouter2 addr add dead:2::1/64 dev eth1 +ip -net nsrouter2 addr add dead:3::10/64 dev eth2 +ip -net nsrouter2 route add default via 192.168.3.1 +ip -net nsrouter2 route add default via dead:3::1 + +sleep 2 +for i in 4 6; do + ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1 + ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1 +done + +for netns in nsrouter1 nsrouter2; do +ip netns exec $netns nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain forward { + type filter hook forward priority 0; policy accept; + meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept + meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept + meta l4proto { icmp, icmpv6 } ct state new,established accept + counter name "unknown" drop + } +} +EOF +done + +ip netns exec nsclient1 nft -f - <<EOF +table inet filter { + counter unknown { } + counter related { } + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept + counter name "unknown" drop + } +} +EOF + +ip netns exec nsclient2 nft -f - <<EOF +table inet filter { + counter unknown { } + counter new { } + counter established { } + + chain input { + type filter hook input priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept + counter name "unknown" drop + } + chain output { + type filter hook output priority 0; policy accept; + meta l4proto { icmp, icmpv6 } ct state established,untracked accept + + meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" + meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" + counter name "unknown" drop + } +} +EOF + + +# make sure NAT core rewrites adress of icmp error if nat is used according to +# conntrack nat information (icmp error will be directed at nsrouter1 address, +# but it needs to be routed to nsclient1 address). +ip netns exec nsrouter1 nft -f - <<EOF +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip protocol icmp oifname "veth0" counter masquerade + } +} +table ip6 nat { + chain postrouting { + type nat hook postrouting priority 0; policy accept; + ip6 nexthdr icmpv6 oifname "veth0" counter masquerade + } +} +EOF + +ip netns exec nsrouter2 ip link set eth1 mtu 1280 +ip netns exec nsclient2 ip link set veth0 mtu 1280 +sleep 1 + +ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ip routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi +ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null +if [ $? -ne 0 ]; then + echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2 + cleanup + exit 1 +fi + +check_unknown +if [ $? -ne 0 ]; then + ret=1 +fi + +expect="packets 0 bytes 0" +for netns in nsrouter1 nsrouter2 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +expect="packets 2 bytes 2076" +check_counter nsclient2 "new" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +# nsrouter2 should have generated the icmp error, so +# related counter should be 0 (its in forward). +expect="packets 0 bytes 0" +check_counter "nsrouter2" "related" "$expect" +if [ $? -ne 0 ]; then + ret=1 +fi + +# but nsrouter1 should have seen it, same for nsclient1. +expect="packets 1 bytes 576" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null +if [ $? -eq 0 ]; then + echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2 + ret=1 +fi + +expect="packets 2 bytes 1856" +for netns in nsrouter1 nsclient1;do + check_counter "$netns" "related" "$expect" + if [ $? -ne 0 ]; then + ret=1 + fi +done + +if [ $ret -eq 0 ];then + echo "PASS: icmp mtu error had RELATED state" +else + echo "ERROR: icmp error RELATED state test has failed" +fi + +cleanup +exit $ret diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index 8ec76681605c..14fcf3104c77 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -6,6 +6,12 @@ # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 ret=0 +test_inet_nat=true + +cleanup() +{ + for i in 0 1 2; do ip netns del ns$i;done +} nft --version > /dev/null 2>&1 if [ $? -ne 0 ];then @@ -20,6 +26,13 @@ if [ $? -ne 0 ];then fi ip netns add ns0 +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace" + exit $ksft_skip +fi + +trap cleanup EXIT + ip netns add ns1 ip netns add ns2 @@ -141,17 +154,24 @@ reset_counters() test_local_dnat6() { + local family=$1 local lret=0 + local IPF="" + + if [ $family = "inet" ];then + IPF="ip6" + fi + ip netns exec ns0 nft -f - <<EOF -table ip6 nat { +table $family nat { chain output { type nat hook output priority 0; policy accept; - ip6 daddr dead:1::99 dnat to dead:2::99 + ip6 daddr dead:1::99 dnat $IPF to dead:2::99 } } EOF if [ $? -ne 0 ]; then - echo "SKIP: Could not add add ip6 dnat hook" + echo "SKIP: Could not add add $family dnat hook" return $ksft_skip fi @@ -201,7 +221,7 @@ EOF fi done - test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2" + test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was $family NATted to ns2" ip netns exec ns0 nft flush chain ip6 nat output return $lret @@ -209,15 +229,32 @@ EOF test_local_dnat() { + local family=$1 local lret=0 -ip netns exec ns0 nft -f - <<EOF -table ip nat { + local IPF="" + + if [ $family = "inet" ];then + IPF="ip" + fi + +ip netns exec ns0 nft -f - <<EOF 2>/dev/null +table $family nat { chain output { type nat hook output priority 0; policy accept; - ip daddr 10.0.1.99 dnat to 10.0.2.99 + ip daddr 10.0.1.99 dnat $IPF to 10.0.2.99 } } EOF + if [ $? -ne 0 ]; then + if [ $family = "inet" ];then + echo "SKIP: inet nat tests" + test_inet_nat=false + return $ksft_skip + fi + echo "SKIP: Could not add add $family dnat hook" + return $ksft_skip + fi + # ping netns1, expect rewrite to netns2 ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null if [ $? -ne 0 ]; then @@ -264,9 +301,9 @@ EOF fi done - test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2" + test $lret -eq 0 && echo "PASS: ping to ns1 was $family NATted to ns2" - ip netns exec ns0 nft flush chain ip nat output + ip netns exec ns0 nft flush chain $family nat output reset_counters ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null @@ -313,7 +350,7 @@ EOF fi done - test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush" + test $lret -eq 0 && echo "PASS: ping to ns1 OK after $family nat output chain flush" return $lret } @@ -321,6 +358,8 @@ EOF test_masquerade6() { + local family=$1 + local natflags=$2 local lret=0 ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null @@ -351,23 +390,27 @@ test_masquerade6() # add masquerading rule ip netns exec ns0 nft -f - <<EOF -table ip6 nat { +table $family nat { chain postrouting { type nat hook postrouting priority 0; policy accept; - meta oif veth0 masquerade + meta oif veth0 masquerade $natflags } } EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family masquerade hook" + return $ksft_skip + fi + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading" + echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags" lret=1 fi # ns1 should have seen packets from ns0, due to masquerade expect="packets 1 bytes 104" for dir in "in6" "out6" ; do - cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect") if [ $? -ne 0 ]; then bad_counter ns1 ns0$dir "$expect" @@ -397,19 +440,27 @@ EOF fi done - ip netns exec ns0 nft flush chain ip6 nat postrouting + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags (attempt 2)" + lret=1 + fi + + ip netns exec ns0 nft flush chain $family nat postrouting if [ $? -ne 0 ]; then - echo "ERROR: Could not flush ip6 nat postrouting" 1>&2 + echo "ERROR: Could not flush $family nat postrouting" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2" + test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for ns2" return $lret } test_masquerade() { + local family=$1 + local natflags=$2 local lret=0 ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null @@ -417,7 +468,7 @@ test_masquerade() ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: canot ping ns1 from ns2" + echo "ERROR: cannot ping ns1 from ns2 $natflags" lret=1 fi @@ -440,16 +491,21 @@ test_masquerade() # add masquerading rule ip netns exec ns0 nft -f - <<EOF -table ip nat { +table $family nat { chain postrouting { type nat hook postrouting priority 0; policy accept; - meta oif veth0 masquerade + meta oif veth0 masquerade $natflags } } EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family masquerade hook" + return $ksft_skip + fi + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading" + echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags" lret=1 fi @@ -485,19 +541,26 @@ EOF fi done - ip netns exec ns0 nft flush chain ip nat postrouting + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping ns1 from ns2 with active ip masquerade $natflags (attempt 2)" + lret=1 + fi + + ip netns exec ns0 nft flush chain $family nat postrouting if [ $? -ne 0 ]; then - echo "ERROR: Could not flush nat postrouting" 1>&2 + echo "ERROR: Could not flush $family nat postrouting" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: IP masquerade for ns2" + test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for ns2" return $lret } test_redirect6() { + local family=$1 local lret=0 ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null @@ -527,16 +590,21 @@ test_redirect6() # add redirect rule ip netns exec ns0 nft -f - <<EOF -table ip6 nat { +table $family nat { chain prerouting { type nat hook prerouting priority 0; policy accept; meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect } } EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family redirect hook" + return $ksft_skip + fi + ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect" + echo "ERROR: cannot ping ns1 from ns2 via ipv6 with active $family redirect" lret=1 fi @@ -560,19 +628,20 @@ EOF fi done - ip netns exec ns0 nft delete table ip6 nat + ip netns exec ns0 nft delete table $family nat if [ $? -ne 0 ]; then - echo "ERROR: Could not delete ip6 nat table" 1>&2 + echo "ERROR: Could not delete $family nat table" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2" + test $lret -eq 0 && echo "PASS: $family IPv6 redirection for ns2" return $lret } test_redirect() { + local family=$1 local lret=0 ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null @@ -603,16 +672,21 @@ test_redirect() # add redirect rule ip netns exec ns0 nft -f - <<EOF -table ip nat { +table $family nat { chain prerouting { type nat hook prerouting priority 0; policy accept; meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect } } EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add add $family redirect hook" + return $ksft_skip + fi + ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 if [ $? -ne 0 ] ; then - echo "ERROR: cannot ping ns1 from ns2 with active ip redirect" + echo "ERROR: cannot ping ns1 from ns2 with active $family ip redirect" lret=1 fi @@ -637,13 +711,13 @@ EOF fi done - ip netns exec ns0 nft delete table ip nat + ip netns exec ns0 nft delete table $family nat if [ $? -ne 0 ]; then - echo "ERROR: Could not delete nat table" 1>&2 + echo "ERROR: Could not delete $family nat table" 1>&2 lret=1 fi - test $lret -eq 0 && echo "PASS: IP redirection for ns2" + test $lret -eq 0 && echo "PASS: $family IP redirection for ns2" return $lret } @@ -746,17 +820,26 @@ if [ $ret -eq 0 ];then fi reset_counters -test_local_dnat -test_local_dnat6 - +test_local_dnat ip +test_local_dnat6 ip6 reset_counters -test_masquerade -test_masquerade6 +$test_inet_nat && test_local_dnat inet +$test_inet_nat && test_local_dnat6 inet +for flags in "" "fully-random"; do +reset_counters +test_masquerade ip $flags +test_masquerade6 ip6 $flags reset_counters -test_redirect -test_redirect6 +$test_inet_nat && test_masquerade inet $flags +$test_inet_nat && test_masquerade6 inet $flags +done -for i in 0 1 2; do ip netns del ns$i;done +reset_counters +test_redirect ip +test_redirect6 ip6 +reset_counters +$test_inet_nat && test_redirect inet +$test_inet_nat && test_redirect6 inet exit $ret diff --git a/tools/testing/selftests/nsfs/Makefile b/tools/testing/selftests/nsfs/Makefile index 9ff7c7f80625..dd9bd50b7b93 100644 --- a/tools/testing/selftests/nsfs/Makefile +++ b/tools/testing/selftests/nsfs/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only TEST_GEN_PROGS := owner pidns CFLAGS := -Wall -Werror diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh index 08cbfbbc7029..8a20e03d4cb7 100755 --- a/tools/testing/selftests/ntb/ntb_test.sh +++ b/tools/testing/selftests/ntb/ntb_test.sh @@ -1,16 +1,7 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later # Copyright (c) 2016 Microsemi. All Rights Reserved. # -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# # Author: Logan Gunthorpe <logang@deltatee.com> REMOTE_HOST= diff --git a/tools/testing/selftests/pidfd/.gitignore b/tools/testing/selftests/pidfd/.gitignore new file mode 100644 index 000000000000..822a1e63d045 --- /dev/null +++ b/tools/testing/selftests/pidfd/.gitignore @@ -0,0 +1 @@ +pidfd_test diff --git a/tools/testing/selftests/pidfd/Makefile b/tools/testing/selftests/pidfd/Makefile index deaf8073bc06..443fedbd6231 100644 --- a/tools/testing/selftests/pidfd/Makefile +++ b/tools/testing/selftests/pidfd/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -g -I../../../../usr/include/ TEST_GEN_PROGS := pidfd_test diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index d59378a93782..5bae1792e3d6 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -371,6 +371,7 @@ static int test_pidfd_send_signal_syscall_support(void) int main(int argc, char **argv) { ksft_print_header(); + ksft_set_plan(4); test_pidfd_send_signal_syscall_support(); test_pidfd_send_signal_simple_success(); diff --git a/tools/testing/selftests/powerpc/alignment/Makefile b/tools/testing/selftests/powerpc/alignment/Makefile index d056486f49de..93e9af37449d 100644 --- a/tools/testing/selftests/powerpc/alignment/Makefile +++ b/tools/testing/selftests/powerpc/alignment/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only TEST_GEN_PROGS := copy_first_unaligned alignment_handler top_srcdir = ../../../../.. diff --git a/tools/testing/selftests/powerpc/copyloops/asm/export.h b/tools/testing/selftests/powerpc/copyloops/asm/export.h index 0bab35f6777a..05c1663c89b0 100644 --- a/tools/testing/selftests/powerpc/copyloops/asm/export.h +++ b/tools/testing/selftests/powerpc/copyloops/asm/export.h @@ -1,2 +1,3 @@ /* SPDX-License-Identifier: GPL-2.0 */ #define EXPORT_SYMBOL(x) +#define EXPORT_SYMBOL_KASAN(x) diff --git a/tools/testing/selftests/powerpc/copyloops/asm/kasan.h b/tools/testing/selftests/powerpc/copyloops/asm/kasan.h new file mode 100644 index 000000000000..e69de29bb2d1 --- /dev/null +++ b/tools/testing/selftests/powerpc/copyloops/asm/kasan.h diff --git a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h index 0605df807593..58c1cef3e399 100644 --- a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h +++ b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h @@ -25,6 +25,7 @@ #define _GLOBAL(A) FUNC_START(test_ ## A) #define _GLOBAL_TOC(A) _GLOBAL(A) +#define _GLOBAL_TOC_KASAN(A) _GLOBAL(A) #define PPC_MTOCRF(A, B) mtocrf A, B diff --git a/tools/testing/selftests/powerpc/harness.c b/tools/testing/selftests/powerpc/harness.c index 9d7166dfad1e..ba89353abfcc 100644 --- a/tools/testing/selftests/powerpc/harness.c +++ b/tools/testing/selftests/powerpc/harness.c @@ -21,6 +21,7 @@ #define KILL_TIMEOUT 5 +/* Setting timeout to -1 disables the alarm */ static uint64_t timeout = 120; int run_test(int (test_function)(void), char *name) @@ -43,8 +44,9 @@ int run_test(int (test_function)(void), char *name) setpgid(pid, pid); - /* Wake us up in timeout seconds */ - alarm(timeout); + if (timeout != -1) + /* Wake us up in timeout seconds */ + alarm(timeout); terminated = false; wait: diff --git a/tools/testing/selftests/powerpc/include/reg.h b/tools/testing/selftests/powerpc/include/reg.h index 96043b9b9829..1e797ae396ee 100644 --- a/tools/testing/selftests/powerpc/include/reg.h +++ b/tools/testing/selftests/powerpc/include/reg.h @@ -79,11 +79,13 @@ /* MSR register bits */ #define MSR_TS_S_LG 33 /* Trans Mem state: Suspended */ +#define MSR_TS_T_LG 34 /* Trans Mem state: Active */ #define __MASK(X) (1UL<<(X)) /* macro to check TM MSR bits */ #define MSR_TS_S __MASK(MSR_TS_S_LG) /* Transaction Suspended */ +#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */ /* Vector Instructions */ #define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ diff --git a/tools/testing/selftests/powerpc/primitives/Makefile b/tools/testing/selftests/powerpc/primitives/Makefile index ea2b7bd09e36..9b9491a63213 100644 --- a/tools/testing/selftests/powerpc/primitives/Makefile +++ b/tools/testing/selftests/powerpc/primitives/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -I$(CURDIR) TEST_GEN_PROGS := load_unaligned_zeropad diff --git a/tools/testing/selftests/powerpc/signal/.gitignore b/tools/testing/selftests/powerpc/signal/.gitignore index 1b89224a8aab..dca5852a1546 100644 --- a/tools/testing/selftests/powerpc/signal/.gitignore +++ b/tools/testing/selftests/powerpc/signal/.gitignore @@ -1,2 +1,3 @@ signal signal_tm +sigfuz diff --git a/tools/testing/selftests/powerpc/signal/Makefile b/tools/testing/selftests/powerpc/signal/Makefile index 209a958dca12..113838fbbe7f 100644 --- a/tools/testing/selftests/powerpc/signal/Makefile +++ b/tools/testing/selftests/powerpc/signal/Makefile @@ -1,8 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -TEST_GEN_PROGS := signal signal_tm +TEST_GEN_PROGS := signal signal_tm sigfuz CFLAGS += -maltivec $(OUTPUT)/signal_tm: CFLAGS += -mhtm +$(OUTPUT)/sigfuz: CFLAGS += -pthread -m64 top_srcdir = ../../../../.. include ../../lib.mk diff --git a/tools/testing/selftests/powerpc/signal/sigfuz.c b/tools/testing/selftests/powerpc/signal/sigfuz.c new file mode 100644 index 000000000000..dade00c698c2 --- /dev/null +++ b/tools/testing/selftests/powerpc/signal/sigfuz.c @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2018, Breno Leitao, IBM Corp. + * Licensed under GPLv2. + * + * Sigfuz(tm): A PowerPC TM-aware signal fuzzer. + * + * This is a new selftest that raises SIGUSR1 signals and handles it in a set + * of different ways, trying to create different scenario for testing + * purpose. + * + * This test works raising a signal and calling sigreturn interleaved with + * TM operations, as starting, suspending and terminating a transaction. The + * test depends on random numbers, and, based on them, it sets different TM + * states. + * + * Other than that, the test fills out the user context struct that is passed + * to the sigreturn system call with random data, in order to make sure that + * the signal handler syscall can handle different and invalid states + * properly. + * + * This selftest has command line parameters to control what kind of tests the + * user wants to run, as for example, if a transaction should be started prior + * to signal being raised, or, after the signal being raised and before the + * sigreturn. If no parameter is given, the default is enabling all options. + * + * This test does not check if the user context is being read and set + * properly by the kernel. Its purpose, at this time, is basically + * guaranteeing that the kernel does not crash on invalid scenarios. + */ + +#include <stdio.h> +#include <limits.h> +#include <sys/wait.h> +#include <unistd.h> +#include <stdlib.h> +#include <signal.h> +#include <string.h> +#include <ucontext.h> +#include <sys/mman.h> +#include <pthread.h> +#include "utils.h" + +/* Selftest defaults */ +#define COUNT_MAX 4000 /* Number of interactions */ +#define THREADS 16 /* Number of threads */ + +/* Arguments options */ +#define ARG_MESS_WITH_TM_AT 0x1 +#define ARG_MESS_WITH_TM_BEFORE 0x2 +#define ARG_MESS_WITH_MSR_AT 0x4 +#define ARG_FOREVER 0x10 +#define ARG_COMPLETE (ARG_MESS_WITH_TM_AT | \ + ARG_MESS_WITH_TM_BEFORE | \ + ARG_MESS_WITH_MSR_AT) + +static int args; +static int nthread = THREADS; +static int count_max = COUNT_MAX; + +/* checkpoint context */ +static ucontext_t *tmp_uc; + +/* Return true with 1/x probability */ +static int one_in_chance(int x) +{ + return rand() % x == 0; +} + +/* Change TM states */ +static void mess_with_tm(void) +{ + /* Starts a transaction 33% of the time */ + if (one_in_chance(3)) { + asm ("tbegin. ;" + "beq 8 ;"); + + /* And suspended half of them */ + if (one_in_chance(2)) + asm("tsuspend. ;"); + } + + /* Call 'tend' in 5% of the runs */ + if (one_in_chance(20)) + asm("tend. ;"); +} + +/* Signal handler that will be invoked with raise() */ +static void trap_signal_handler(int signo, siginfo_t *si, void *uc) +{ + ucontext_t *ucp = uc; + + ucp->uc_link = tmp_uc; + + /* + * Set uc_link in three possible ways: + * - Setting a single 'int' in the whole chunk + * - Cloning ucp into uc_link + * - Allocating a new memory chunk + */ + if (one_in_chance(3)) { + memset(ucp->uc_link, rand(), sizeof(ucontext_t)); + } else if (one_in_chance(2)) { + memcpy(ucp->uc_link, uc, sizeof(ucontext_t)); + } else if (one_in_chance(2)) { + if (tmp_uc) { + free(tmp_uc); + tmp_uc = NULL; + } + tmp_uc = malloc(sizeof(ucontext_t)); + ucp->uc_link = tmp_uc; + /* Trying to cause a major page fault at Kernel level */ + madvise(ucp->uc_link, sizeof(ucontext_t), MADV_DONTNEED); + } + + if (args & ARG_MESS_WITH_MSR_AT) { + /* Changing the checkpointed registers */ + if (one_in_chance(4)) { + ucp->uc_link->uc_mcontext.gp_regs[PT_MSR] |= MSR_TS_S; + } else { + if (one_in_chance(2)) { + ucp->uc_link->uc_mcontext.gp_regs[PT_MSR] |= + MSR_TS_T; + } else if (one_in_chance(2)) { + ucp->uc_link->uc_mcontext.gp_regs[PT_MSR] |= + MSR_TS_T | MSR_TS_S; + } + } + + /* Checking the current register context */ + if (one_in_chance(2)) { + ucp->uc_mcontext.gp_regs[PT_MSR] |= MSR_TS_S; + } else if (one_in_chance(2)) { + if (one_in_chance(2)) + ucp->uc_mcontext.gp_regs[PT_MSR] |= + MSR_TS_T; + else if (one_in_chance(2)) + ucp->uc_mcontext.gp_regs[PT_MSR] |= + MSR_TS_T | MSR_TS_S; + } + } + + if (one_in_chance(20)) { + /* Nested transaction start */ + if (one_in_chance(5)) + mess_with_tm(); + + /* Return without changing any other context info */ + return; + } + + if (one_in_chance(10)) + ucp->uc_mcontext.gp_regs[PT_MSR] = random(); + if (one_in_chance(10)) + ucp->uc_mcontext.gp_regs[PT_NIP] = random(); + if (one_in_chance(10)) + ucp->uc_link->uc_mcontext.gp_regs[PT_MSR] = random(); + if (one_in_chance(10)) + ucp->uc_link->uc_mcontext.gp_regs[PT_NIP] = random(); + + ucp->uc_mcontext.gp_regs[PT_TRAP] = random(); + ucp->uc_mcontext.gp_regs[PT_DSISR] = random(); + ucp->uc_mcontext.gp_regs[PT_DAR] = random(); + ucp->uc_mcontext.gp_regs[PT_ORIG_R3] = random(); + ucp->uc_mcontext.gp_regs[PT_XER] = random(); + ucp->uc_mcontext.gp_regs[PT_RESULT] = random(); + ucp->uc_mcontext.gp_regs[PT_SOFTE] = random(); + ucp->uc_mcontext.gp_regs[PT_DSCR] = random(); + ucp->uc_mcontext.gp_regs[PT_CTR] = random(); + ucp->uc_mcontext.gp_regs[PT_LNK] = random(); + ucp->uc_mcontext.gp_regs[PT_CCR] = random(); + ucp->uc_mcontext.gp_regs[PT_REGS_COUNT] = random(); + + ucp->uc_link->uc_mcontext.gp_regs[PT_TRAP] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_DSISR] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_DAR] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_ORIG_R3] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_XER] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_RESULT] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_SOFTE] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_DSCR] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_CTR] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_LNK] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_CCR] = random(); + ucp->uc_link->uc_mcontext.gp_regs[PT_REGS_COUNT] = random(); + + if (args & ARG_MESS_WITH_TM_BEFORE) { + if (one_in_chance(2)) + mess_with_tm(); + } +} + +static void seg_signal_handler(int signo, siginfo_t *si, void *uc) +{ + /* Clear exit for process that segfaults */ + exit(0); +} + +static void *sigfuz_test(void *thrid) +{ + struct sigaction trap_sa, seg_sa; + int ret, i = 0; + pid_t t; + + tmp_uc = malloc(sizeof(ucontext_t)); + + /* Main signal handler */ + trap_sa.sa_flags = SA_SIGINFO; + trap_sa.sa_sigaction = trap_signal_handler; + + /* SIGSEGV signal handler */ + seg_sa.sa_flags = SA_SIGINFO; + seg_sa.sa_sigaction = seg_signal_handler; + + /* The signal handler will enable MSR_TS */ + sigaction(SIGUSR1, &trap_sa, NULL); + + /* If it does not crash, it will segfault, avoid it to retest */ + sigaction(SIGSEGV, &seg_sa, NULL); + + while (i < count_max) { + t = fork(); + + if (t == 0) { + /* Once seed per process */ + srand(time(NULL) + getpid()); + if (args & ARG_MESS_WITH_TM_AT) { + if (one_in_chance(2)) + mess_with_tm(); + } + raise(SIGUSR1); + exit(0); + } else { + waitpid(t, &ret, 0); + } + if (!(args & ARG_FOREVER)) + i++; + } + + /* If not freed already, free now */ + if (tmp_uc) { + free(tmp_uc); + tmp_uc = NULL; + } + + return NULL; +} + +static int signal_fuzzer(void) +{ + int t, rc; + pthread_t *threads; + + threads = malloc(nthread * sizeof(pthread_t)); + + for (t = 0; t < nthread; t++) { + rc = pthread_create(&threads[t], NULL, sigfuz_test, + (void *)&t); + if (rc) + perror("Thread creation error\n"); + } + + for (t = 0; t < nthread; t++) { + rc = pthread_join(threads[t], NULL); + if (rc) + perror("Thread join error\n"); + } + + free(threads); + + return EXIT_SUCCESS; +} + +static void show_help(char *name) +{ + printf("%s: Sigfuzzer for powerpc\n", name); + printf("Usage:\n"); + printf("\t-b\t Mess with TM before raising a SIGUSR1 signal\n"); + printf("\t-a\t Mess with TM after raising a SIGUSR1 signal\n"); + printf("\t-m\t Mess with MSR[TS] bits at mcontext\n"); + printf("\t-x\t Mess with everything above\n"); + printf("\t-f\t Run forever (Press ^C to Quit)\n"); + printf("\t-i\t Amount of interactions. (Default = %d)\n", COUNT_MAX); + printf("\t-t\t Amount of threads. (Default = %d)\n", THREADS); + exit(-1); +} + +int main(int argc, char **argv) +{ + int opt; + + while ((opt = getopt(argc, argv, "bamxt:fi:h")) != -1) { + if (opt == 'b') { + printf("Mess with TM before signal\n"); + args |= ARG_MESS_WITH_TM_BEFORE; + } else if (opt == 'a') { + printf("Mess with TM at signal handler\n"); + args |= ARG_MESS_WITH_TM_AT; + } else if (opt == 'm') { + printf("Mess with MSR[TS] bits in mcontext\n"); + args |= ARG_MESS_WITH_MSR_AT; + } else if (opt == 'x') { + printf("Running with all options enabled\n"); + args |= ARG_COMPLETE; + } else if (opt == 't') { + nthread = atoi(optarg); + printf("Threads = %d\n", nthread); + } else if (opt == 'f') { + args |= ARG_FOREVER; + printf("Press ^C to stop\n"); + test_harness_set_timeout(-1); + } else if (opt == 'i') { + count_max = atoi(optarg); + printf("Running for %d interactions\n", count_max); + } else if (opt == 'h') { + show_help(argv[0]); + } + } + + /* Default test suite */ + if (!args) + args = ARG_COMPLETE; + + test_harness(signal_fuzzer, "signal_fuzzer"); +} diff --git a/tools/testing/selftests/powerpc/syscalls/Makefile b/tools/testing/selftests/powerpc/syscalls/Makefile index 161b8846336f..01b22775ca87 100644 --- a/tools/testing/selftests/powerpc/syscalls/Makefile +++ b/tools/testing/selftests/powerpc/syscalls/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only TEST_GEN_PROGS := ipc_unmuxed CFLAGS += -I../../../../../usr/include diff --git a/tools/testing/selftests/powerpc/vphn/Makefile b/tools/testing/selftests/powerpc/vphn/Makefile index fb82068c9fda..18b885da01bd 100644 --- a/tools/testing/selftests/powerpc/vphn/Makefile +++ b/tools/testing/selftests/powerpc/vphn/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only TEST_GEN_PROGS := test-vphn CFLAGS += -m64 diff --git a/tools/testing/selftests/powerpc/vphn/vphn.c b/tools/testing/selftests/powerpc/vphn/vphn.c index 186b906e66d5..1d1f5f2be3b2 120000 --- a/tools/testing/selftests/powerpc/vphn/vphn.c +++ b/tools/testing/selftests/powerpc/vphn/vphn.c @@ -1 +1 @@ -../../../../../arch/powerpc/mm/vphn.c
\ No newline at end of file +../../../../../arch/powerpc/mm/book3s64/vphn.c
\ No newline at end of file diff --git a/tools/testing/selftests/powerpc/vphn/vphn.h b/tools/testing/selftests/powerpc/vphn/vphn.h index 7131efe38c65..45fe160f8288 120000 --- a/tools/testing/selftests/powerpc/vphn/vphn.h +++ b/tools/testing/selftests/powerpc/vphn/vphn.h @@ -1 +1 @@ -../../../../../arch/powerpc/mm/vphn.h
\ No newline at end of file +../../../../../arch/powerpc/mm/book3s64/vphn.h
\ No newline at end of file diff --git a/tools/testing/selftests/proc/Makefile b/tools/testing/selftests/proc/Makefile index 5163dc887aa3..9f09fcd09ea3 100644 --- a/tools/testing/selftests/proc/Makefile +++ b/tools/testing/selftests/proc/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -Wall -O2 -Wno-unused-function CFLAGS += -D_GNU_SOURCE diff --git a/tools/testing/selftests/proc/proc-pid-vm.c b/tools/testing/selftests/proc/proc-pid-vm.c index 7202bbac976e..853aa164a401 100644 --- a/tools/testing/selftests/proc/proc-pid-vm.c +++ b/tools/testing/selftests/proc/proc-pid-vm.c @@ -187,8 +187,8 @@ static int make_exe(const uint8_t *payload, size_t len) ph.p_offset = 0; ph.p_vaddr = VADDR; ph.p_paddr = 0; - ph.p_filesz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + sizeof(payload); - ph.p_memsz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + sizeof(payload); + ph.p_filesz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + len; + ph.p_memsz = sizeof(struct elf64_hdr) + sizeof(struct elf64_phdr) + len; ph.p_align = 4096; fd = openat(AT_FDCWD, "/tmp", O_WRONLY|O_EXCL|O_TMPFILE, 0700); diff --git a/tools/testing/selftests/proc/proc-self-map-files-002.c b/tools/testing/selftests/proc/proc-self-map-files-002.c index 762cb01f2ca7..47b7473dedef 100644 --- a/tools/testing/selftests/proc/proc-self-map-files-002.c +++ b/tools/testing/selftests/proc/proc-self-map-files-002.c @@ -46,12 +46,9 @@ static void fail(const char *fmt, unsigned long a, unsigned long b) int main(void) { - const unsigned int PAGE_SIZE = sysconf(_SC_PAGESIZE); -#ifdef __arm__ - unsigned long va = 2 * PAGE_SIZE; -#else - unsigned long va = 0; -#endif + const int PAGE_SIZE = sysconf(_SC_PAGESIZE); + const unsigned long va_max = 1UL << 32; + unsigned long va; void *p; int fd; unsigned long a, b; @@ -60,10 +57,13 @@ int main(void) if (fd == -1) return 1; - p = mmap((void *)va, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0); - if (p == MAP_FAILED) { - if (errno == EPERM) - return 4; + for (va = 0; va < va_max; va += PAGE_SIZE) { + p = mmap((void *)va, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0); + if (p == (void *)va) + break; + } + if (va == va_max) { + fprintf(stderr, "error: mmap doesn't like you\n"); return 1; } diff --git a/tools/testing/selftests/ptp/testptp.c b/tools/testing/selftests/ptp/testptp.c index a5d8f0ab0da0..6216375cb544 100644 --- a/tools/testing/selftests/ptp/testptp.c +++ b/tools/testing/selftests/ptp/testptp.c @@ -63,30 +63,6 @@ static clockid_t get_clockid(int fd) return (((unsigned int) ~fd) << 3) | CLOCKFD; } -static void handle_alarm(int s) -{ - printf("received signal %d\n", s); -} - -static int install_handler(int signum, void (*handler)(int)) -{ - struct sigaction action; - sigset_t mask; - - /* Unblock the signal. */ - sigemptyset(&mask); - sigaddset(&mask, signum); - sigprocmask(SIG_UNBLOCK, &mask, NULL); - - /* Install the signal handler. */ - action.sa_handler = handler; - action.sa_flags = 0; - sigemptyset(&action.sa_mask); - sigaction(signum, &action, NULL); - - return 0; -} - static long ppb_to_scaled_ppm(int ppb) { /* @@ -112,8 +88,6 @@ static void usage(char *progname) { fprintf(stderr, "usage: %s [options]\n" - " -a val request a one-shot alarm after 'val' seconds\n" - " -A val request a periodic alarm every 'val' seconds\n" " -c query the ptp clock's capabilities\n" " -d name device to open\n" " -e val read 'val' external time stamp events\n" @@ -148,15 +122,9 @@ int main(int argc, char *argv[]) struct ptp_pin_desc desc; struct timespec ts; struct timex tx; - - static timer_t timerid; - struct itimerspec timeout; - struct sigevent sigevent; - struct ptp_clock_time *pct; struct ptp_sys_offset *sysoff; - char *progname; unsigned int i; int c, cnt, fd; @@ -170,10 +138,8 @@ int main(int argc, char *argv[]) int gettime = 0; int index = 0; int list_pins = 0; - int oneshot = 0; int pct_offset = 0; int n_samples = 0; - int periodic = 0; int perout = -1; int pin_index = -1, pin_func; int pps = -1; @@ -185,14 +151,8 @@ int main(int argc, char *argv[]) progname = strrchr(argv[0], '/'); progname = progname ? 1+progname : argv[0]; - while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:lL:p:P:sSt:T:v"))) { + while (EOF != (c = getopt(argc, argv, "cd:e:f:ghi:k:lL:p:P:sSt:T:v"))) { switch (c) { - case 'a': - oneshot = atoi(optarg); - break; - case 'A': - periodic = atoi(optarg); - break; case 'c': capabilities = 1; break; @@ -393,49 +353,6 @@ int main(int argc, char *argv[]) } } - if (oneshot) { - install_handler(SIGALRM, handle_alarm); - /* Create a timer. */ - sigevent.sigev_notify = SIGEV_SIGNAL; - sigevent.sigev_signo = SIGALRM; - if (timer_create(clkid, &sigevent, &timerid)) { - perror("timer_create"); - return -1; - } - /* Start the timer. */ - memset(&timeout, 0, sizeof(timeout)); - timeout.it_value.tv_sec = oneshot; - if (timer_settime(timerid, 0, &timeout, NULL)) { - perror("timer_settime"); - return -1; - } - pause(); - timer_delete(timerid); - } - - if (periodic) { - install_handler(SIGALRM, handle_alarm); - /* Create a timer. */ - sigevent.sigev_notify = SIGEV_SIGNAL; - sigevent.sigev_signo = SIGALRM; - if (timer_create(clkid, &sigevent, &timerid)) { - perror("timer_create"); - return -1; - } - /* Start the timer. */ - memset(&timeout, 0, sizeof(timeout)); - timeout.it_interval.tv_sec = periodic; - timeout.it_value.tv_sec = periodic; - if (timer_settime(timerid, 0, &timeout, NULL)) { - perror("timer_settime"); - return -1; - } - while (1) { - pause(); - } - timer_delete(timerid); - } - if (perout >= 0) { if (clock_gettime(clkid, &ts)) { perror("clock_gettime"); diff --git a/tools/testing/selftests/ptrace/Makefile b/tools/testing/selftests/ptrace/Makefile index 8a2bc5562179..cb21c76a18ca 100644 --- a/tools/testing/selftests/ptrace/Makefile +++ b/tools/testing/selftests/ptrace/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -iquote../../../../include/uapi -Wall TEST_GEN_PROGS := peeksiginfo diff --git a/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh index 43540f1828cc..2deea2169fc2 100755 --- a/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh +++ b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Extract the number of CPUs expected from the specified Kconfig-file # fragment by checking CONFIG_SMP and CONFIG_NR_CPUS. If the specified @@ -7,23 +8,9 @@ # # Usage: configNR_CPUS.sh config-frag # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> cf=$1 if test ! -r $cf diff --git a/tools/testing/selftests/rcutorture/bin/config_override.sh b/tools/testing/selftests/rcutorture/bin/config_override.sh index ef7fcbac3d42..90016c359e83 100755 --- a/tools/testing/selftests/rcutorture/bin/config_override.sh +++ b/tools/testing/selftests/rcutorture/bin/config_override.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # config_override.sh base override # @@ -6,23 +7,9 @@ # that conflict with any in override, concatenating what remains and # sending the result to standard output. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2017 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> base=$1 if test -r $base diff --git a/tools/testing/selftests/rcutorture/bin/configcheck.sh b/tools/testing/selftests/rcutorture/bin/configcheck.sh index 197deece7c7c..31584cee84d7 100755 --- a/tools/testing/selftests/rcutorture/bin/configcheck.sh +++ b/tools/testing/selftests/rcutorture/bin/configcheck.sh @@ -1,23 +1,11 @@ #!/bin/bash -# Usage: configcheck.sh .config .config-template -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. +# SPDX-License-Identifier: GPL-2.0+ # -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. +# Usage: configcheck.sh .config .config-template # # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/abat-chk-config.sh.$$ trap 'rm -rf $T' 0 @@ -26,6 +14,7 @@ mkdir $T cat $1 > $T/.config cat $2 | sed -e 's/\(.*\)=n/# \1 is not set/' -e 's/^#CHECK#//' | +grep -v '^CONFIG_INITRAMFS_SOURCE' | awk ' { print "if grep -q \"" $0 "\" < '"$T/.config"'"; diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh index 65541c21a544..40359486b3a8 100755 --- a/tools/testing/selftests/rcutorture/bin/configinit.sh +++ b/tools/testing/selftests/rcutorture/bin/configinit.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Usage: configinit.sh config-spec-file build-output-dir results-dir # @@ -14,23 +15,9 @@ # for example, "O=/tmp/foo". If this argument is omitted, the .config # file will be generated directly in the current directory. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/configinit.sh.$$ trap 'rm -rf $T' 0 diff --git a/tools/testing/selftests/rcutorture/bin/cpus2use.sh b/tools/testing/selftests/rcutorture/bin/cpus2use.sh index bb99cde3f5f9..ff7102212703 100755 --- a/tools/testing/selftests/rcutorture/bin/cpus2use.sh +++ b/tools/testing/selftests/rcutorture/bin/cpus2use.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Get an estimate of how CPU-hoggy to be. # # Usage: cpus2use.sh # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> ncpus=`grep '^processor' /proc/cpuinfo | wc -l` idlecpus=`mpstat | tail -1 | \ diff --git a/tools/testing/selftests/rcutorture/bin/functions.sh b/tools/testing/selftests/rcutorture/bin/functions.sh index 65f6655026f0..6bcb8b5b2ff2 100644 --- a/tools/testing/selftests/rcutorture/bin/functions.sh +++ b/tools/testing/selftests/rcutorture/bin/functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # bootparam_hotplug_cpu bootparam-string # diff --git a/tools/testing/selftests/rcutorture/bin/jitter.sh b/tools/testing/selftests/rcutorture/bin/jitter.sh index 3633828375e3..435b60933985 100755 --- a/tools/testing/selftests/rcutorture/bin/jitter.sh +++ b/tools/testing/selftests/rcutorture/bin/jitter.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Alternate sleeping and spinning on randomly selected CPUs. The purpose # of this script is to inflict random OS jitter on a concurrently running @@ -11,23 +12,9 @@ # sleepmax: Maximum microseconds to sleep, defaults to one second. # spinmax: Maximum microseconds to spin, defaults to one millisecond. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> me=$(($1 * 1000)) duration=$2 diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh index 9115fcdb5617..c27a0bbb9c02 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Build a kvm-ready Linux kernel from the tree in the current directory. # # Usage: kvm-build.sh config-template build-dir resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> config_template=${1} if test -z "$config_template" -o ! -f "$config_template" -o ! -r "$config_template" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh index 98f650c9bf54..8426fe1f15ee 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh @@ -1,4 +1,5 @@ #!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ # # Invoke a text editor on all console.log files for all runs with diagnostics, # that is, on all such files having a console.log.diags counterpart. @@ -10,6 +11,10 @@ # # The "directory" above should end with the date/time directory, for example, # "tools/testing/selftests/rcutorture/res/2018.02.25-14:27:27". +# +# Copyright (C) IBM Corporation, 2018 +# +# Author: Paul E. McKenney <paulmck@linux.ibm.com> rundir="${1}" if test -z "$rundir" -o ! -d "$rundir" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh index 2de92f43ee8c..f3a7a5e2b89d 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for locktorture progress. # # Usage: kvm-recheck-lock.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh index 0fa8a61ccb7b..2a7f3f4756a7 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcutorture progress. # # Usage: kvm-recheck-rcu.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh index 8948f7926b21..7d3c2be66c64 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcuperf performance measurements, # looking for ftrace data. Exits with 0 if data was found, analyzed, and @@ -7,23 +8,9 @@ # # Usage: kvm-recheck-rcuperf-ftrace.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" . functions.sh diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh index ccebf772fa1e..db0375a57f28 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcuperf performance measurements. # # Usage: kvm-recheck-rcuperf.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh index c9bab57a77eb..2adde6aaafdb 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Given the results directories for previous KVM-based torture runs, # check the build and console output for errors. Given a directory @@ -6,23 +7,9 @@ # # Usage: kvm-recheck.sh resdir ... # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH . functions.sh diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index 58ca758a5786..0eb1ec16d78a 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Run a kvm-based test of the specified tree on the specified configs. # Fully automated run and error checking, no graphics console. @@ -20,23 +21,9 @@ # # More sophisticated argument parsing is clearly needed. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/kvm-test-1-run.sh.$$ trap 'rm -rf $T' 0 diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 19864f1cb27a..8f1e337b9b54 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Run a series of tests under KVM. By default, this series is specified # by the relevant CFLIST file, but can be overridden by the --configs @@ -6,23 +7,9 @@ # # Usage: kvm.sh [ options ] # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> scriptname=$0 args="$*" diff --git a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh index 83552bb007b4..6fa9bd1ddc09 100755 --- a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh +++ b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh @@ -1,21 +1,8 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Create an initrd directory if one does not already exist. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # # Author: Connor Shu <Connor.Shu@ibm.com> diff --git a/tools/testing/selftests/rcutorture/bin/parse-build.sh b/tools/testing/selftests/rcutorture/bin/parse-build.sh index 24fe5f822b28..0701b3bf6ade 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-build.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-build.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Check the build output from an rcutorture run for goodness. # The "file" is a pathname on the local system, and "title" is @@ -8,23 +9,9 @@ # # Usage: parse-build.sh file title # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> F=$1 title=$2 diff --git a/tools/testing/selftests/rcutorture/bin/parse-console.sh b/tools/testing/selftests/rcutorture/bin/parse-console.sh index 84933f6aed77..4508373a922f 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-console.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-console.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Check the console output from an rcutorture run for oopses. # The "file" is a pathname on the local system, and "title" is @@ -6,23 +7,9 @@ # # Usage: parse-console.sh file title # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/parse-console.sh.$$ file="$1" diff --git a/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh index 80eb646e1319..d3e4b2971f92 100644 --- a/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Kernel-version-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # locktorture_param_onoff bootparam-string config-file # diff --git a/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh index 7bab8246392b..effa415f9b92 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Kernel-version-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # rcutorture_param_n_barrier_cbs bootparam-string # diff --git a/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh index d36b8fd6f0fc..777d5b0c190f 100644 --- a/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Torture-suite-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2015 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # per_version_boot_params bootparam-string config-file seconds # diff --git a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/types.h b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/types.h index d27285f8ee82..8bc960e5e713 100644 --- a/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/types.h +++ b/tools/testing/selftests/rcutorture/formal/srcu-cbmc/include/linux/types.h @@ -59,11 +59,7 @@ typedef __u32 uint32_t; * * blkcnt_t is the type of the inode's block count. */ -#ifdef CONFIG_LBDAF typedef u64 sector_t; -#else -typedef unsigned long sector_t; -#endif /* * The type of an index into the pagecache. diff --git a/tools/testing/selftests/rseq/Makefile b/tools/testing/selftests/rseq/Makefile index c30c52e1d0d2..d6469535630a 100644 --- a/tools/testing/selftests/rseq/Makefile +++ b/tools/testing/selftests/rseq/Makefile @@ -1,5 +1,11 @@ # SPDX-License-Identifier: GPL-2.0+ OR MIT -CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ + +ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),) +CLANG_FLAGS += -no-integrated-as +endif + +CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ \ + $(CLANG_FLAGS) LDLIBS += -lpthread # Own dependencies because we only want to build against 1st prerequisite, but diff --git a/tools/testing/selftests/rseq/rseq-arm.h b/tools/testing/selftests/rseq/rseq-arm.h index 3cea19877227..84f28f147fb6 100644 --- a/tools/testing/selftests/rseq/rseq-arm.h +++ b/tools/testing/selftests/rseq/rseq-arm.h @@ -5,7 +5,54 @@ * (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com> */ -#define RSEQ_SIG 0x53053053 +/* + * RSEQ_SIG uses the udf A32 instruction with an uncommon immediate operand + * value 0x5de3. This traps if user-space reaches this instruction by mistake, + * and the uncommon operand ensures the kernel does not move the instruction + * pointer to attacker-controlled code on rseq abort. + * + * The instruction pattern in the A32 instruction set is: + * + * e7f5def3 udf #24035 ; 0x5de3 + * + * This translates to the following instruction pattern in the T16 instruction + * set: + * + * little endian: + * def3 udf #243 ; 0xf3 + * e7f5 b.n <7f5> + * + * pre-ARMv6 big endian code: + * e7f5 b.n <7f5> + * def3 udf #243 ; 0xf3 + * + * ARMv6+ -mbig-endian generates mixed endianness code vs data: little-endian + * code and big-endian data. Ensure the RSEQ_SIG data signature matches code + * endianness. Prior to ARMv6, -mbig-endian generates big-endian code and data + * (which match), so there is no need to reverse the endianness of the data + * representation of the signature. However, the choice between BE32 and BE8 + * is done by the linker, so we cannot know whether code and data endianness + * will be mixed before the linker is invoked. + */ + +#define RSEQ_SIG_CODE 0xe7f5def3 + +#ifndef __ASSEMBLER__ + +#define RSEQ_SIG_DATA \ + ({ \ + int sig; \ + asm volatile ("b 2f\n\t" \ + "1: .inst " __rseq_str(RSEQ_SIG_CODE) "\n\t" \ + "2:\n\t" \ + "ldr %[sig], 1b\n\t" \ + : [sig] "=r" (sig)); \ + sig; \ + }) + +#define RSEQ_SIG RSEQ_SIG_DATA + +#endif #define rseq_smp_mb() __asm__ __volatile__ ("dmb" ::: "memory", "cc") #define rseq_smp_rmb() __asm__ __volatile__ ("dmb" ::: "memory", "cc") @@ -30,18 +77,35 @@ do { \ #include "rseq-skip.h" #else /* !RSEQ_SKIP_FASTPATH */ -#define __RSEQ_ASM_DEFINE_TABLE(version, flags, start_ip, \ +#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ + __rseq_str(label) ":\n\t" \ ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".word " __rseq_str(label) "b, 0x0\n\t" \ ".popsection\n\t" -#define RSEQ_ASM_DEFINE_TABLE(start_ip, post_commit_ip, abort_ip) \ - __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \ +#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "adr r0, " __rseq_str(cs_label) "\n\t" \ @@ -61,7 +125,8 @@ do { \ __rseq_str(table_label) ":\n\t" \ ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \ - ".word " __rseq_str(RSEQ_SIG) "\n\t" \ + ".arm\n\t" \ + ".inst " __rseq_str(RSEQ_SIG_CODE) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ "b %l[" __rseq_str(abort_label) "]\n\t" @@ -86,7 +151,12 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -148,7 +218,12 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -214,7 +289,10 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -266,7 +344,12 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -336,7 +419,12 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -407,7 +495,13 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -485,7 +579,12 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "str %[src], %[rseq_scratch0]\n\t" "str %[dst], %[rseq_scratch1]\n\t" "str %[len], %[rseq_scratch2]\n\t" @@ -604,7 +703,12 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "str %[src], %[rseq_scratch0]\n\t" "str %[dst], %[rseq_scratch1]\n\t" "str %[len], %[rseq_scratch2]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-arm64.h b/tools/testing/selftests/rseq/rseq-arm64.h index 954f34671ca6..200dae9e4208 100644 --- a/tools/testing/selftests/rseq/rseq-arm64.h +++ b/tools/testing/selftests/rseq/rseq-arm64.h @@ -6,7 +6,20 @@ * (C) Copyright 2018 - Will Deacon <will.deacon@arm.com> */ -#define RSEQ_SIG 0xd428bc00 /* BRK #0x45E0 */ +/* + * aarch64 -mbig-endian generates mixed endianness code vs data: + * little-endian code and big-endian data. Ensure the RSEQ_SIG signature + * matches code endianness. + */ +#define RSEQ_SIG_CODE 0xd428bc00 /* BRK #0x45E0. */ + +#ifdef __AARCH64EB__ +#define RSEQ_SIG_DATA 0x00bc28d4 /* BRK #0x45E0. */ +#else +#define RSEQ_SIG_DATA RSEQ_SIG_CODE +#endif + +#define RSEQ_SIG RSEQ_SIG_DATA #define rseq_smp_mb() __asm__ __volatile__ ("dmb ish" ::: "memory") #define rseq_smp_rmb() __asm__ __volatile__ ("dmb ishld" ::: "memory") @@ -82,19 +95,35 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ post_commit_offset, abort_ip) \ - " .pushsection __rseq_table, \"aw\"\n" \ + " .pushsection __rseq_cs, \"aw\"\n" \ " .balign 32\n" \ __rseq_str(label) ":\n" \ " .long " __rseq_str(version) ", " __rseq_str(flags) "\n" \ " .quad " __rseq_str(start_ip) ", " \ __rseq_str(post_commit_offset) ", " \ __rseq_str(abort_ip) "\n" \ + " .popsection\n\t" \ + " .pushsection __rseq_cs_ptr_array, \"aw\"\n" \ + " .quad " __rseq_str(label) "b\n" \ " .popsection\n" #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + " .pushsection __rseq_exit_point_array, \"aw\"\n" \ + " .quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n" \ + " .popsection\n" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ " adrp " RSEQ_ASM_TMP_REG ", " __rseq_str(cs_label) "\n" \ @@ -105,7 +134,7 @@ do { \ #define RSEQ_ASM_DEFINE_ABORT(label, abort_label) \ " b 222f\n" \ - " .inst " __rseq_str(RSEQ_SIG) "\n" \ + " .inst " __rseq_str(RSEQ_SIG_CODE) "\n" \ __rseq_str(label) ":\n" \ " b %l[" __rseq_str(abort_label) "]\n" \ "222:\n" @@ -182,6 +211,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -231,6 +265,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -282,6 +321,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -325,6 +367,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -379,6 +426,11 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -433,6 +485,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error3]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -490,6 +548,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) @@ -545,6 +608,11 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2]) +#endif RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) RSEQ_INJECT_ASM(3) diff --git a/tools/testing/selftests/rseq/rseq-mips.h b/tools/testing/selftests/rseq/rseq-mips.h index 7f48ecf46994..e989e7c14b09 100644 --- a/tools/testing/selftests/rseq/rseq-mips.h +++ b/tools/testing/selftests/rseq/rseq-mips.h @@ -7,7 +7,39 @@ * (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com> */ -#define RSEQ_SIG 0x53053053 +/* + * RSEQ_SIG uses the break instruction. The instruction pattern is: + * + * On MIPS: + * 0350000d break 0x350 + * + * On nanoMIPS: + * 00100350 break 0x350 + * + * On microMIPS: + * 0000d407 break 0x350 + * + * For nanoMIPS32 and microMIPS, the instruction stream is encoded as 16-bit + * halfwords, so the signature halfwords need to be swapped accordingly for + * little-endian. + */ +#if defined(__nanomips__) +# ifdef __MIPSEL__ +# define RSEQ_SIG 0x03500010 +# else +# define RSEQ_SIG 0x00100350 +# endif +#elif defined(__mips_micromips) +# ifdef __MIPSEL__ +# define RSEQ_SIG 0xd4070000 +# else +# define RSEQ_SIG 0x0000d407 +# endif +#elif defined(__mips__) +# define RSEQ_SIG 0x0350000d +#else +/* Unknown MIPS architecture. */ +#endif #define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory") #define rseq_smp_rmb() rseq_smp_mb() @@ -54,20 +86,38 @@ do { \ # error unsupported _MIPS_SZLONG #endif -#define __RSEQ_ASM_DEFINE_TABLE(version, flags, start_ip, \ +#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \ post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ + __rseq_str(label) ":\n\t" \ ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \ LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(label) "b") "\n\t" \ ".popsection\n\t" -#define RSEQ_ASM_DEFINE_TABLE(start_ip, post_commit_ip, abort_ip) \ - __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \ +#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ + __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \ + LONG " " U32_U64_PAD(__rseq_str(exit_ip)) "\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ LONG_LA " $4, " __rseq_str(cs_label) "\n\t" \ @@ -113,7 +163,12 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -173,7 +228,12 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -237,7 +297,10 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -289,7 +352,12 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -357,7 +425,12 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -426,7 +499,13 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -500,7 +579,12 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif LONG_S " %[src], %[rseq_scratch0]\n\t" LONG_S " %[dst], %[rseq_scratch1]\n\t" LONG_S " %[len], %[rseq_scratch2]\n\t" @@ -616,7 +700,12 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, rseq_workaround_gcc_asm_size_guess(); __asm__ __volatile__ goto ( - RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif LONG_S " %[src], %[rseq_scratch0]\n\t" LONG_S " %[dst], %[rseq_scratch1]\n\t" LONG_S " %[len], %[rseq_scratch2]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-ppc.h b/tools/testing/selftests/rseq/rseq-ppc.h index 52630c9f42be..76be90196fe4 100644 --- a/tools/testing/selftests/rseq/rseq-ppc.h +++ b/tools/testing/selftests/rseq/rseq-ppc.h @@ -6,7 +6,15 @@ * (C) Copyright 2016-2018 - Boqun Feng <boqun.feng@gmail.com> */ -#define RSEQ_SIG 0x53053053 +/* + * RSEQ_SIG is used with the following trap instruction: + * + * powerpc-be: 0f e5 00 0b twui r5,11 + * powerpc64-le: 0b 00 e5 0f twui r5,11 + * powerpc64-be: 0f e5 00 0b twui r5,11 + */ + +#define RSEQ_SIG 0x0fe5000b #define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory", "cc") #define rseq_smp_lwsync() __asm__ __volatile__ ("lwsync" ::: "memory", "cc") @@ -33,8 +41,8 @@ do { \ #else /* !RSEQ_SKIP_FASTPATH */ /* - * The __rseq_table section can be used by debuggers to better handle - * single-stepping through the restartable critical sections. + * The __rseq_cs_ptr_array and __rseq_cs sections can be used by debuggers to + * better handle single-stepping through the restartable critical sections. */ #ifdef __PPC64__ @@ -46,11 +54,14 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".quad " __rseq_str(label) "b\n\t" \ ".popsection\n\t" #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ @@ -63,6 +74,19 @@ do { \ "std %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \ __rseq_str(label) ":\n\t" +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \ + ".popsection\n\t" + #else /* #ifdef __PPC64__ */ #define STORE_WORD "stw " @@ -72,12 +96,29 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ /* 32-bit only supported on BE */ \ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".long 0x0, " __rseq_str(label) "b\n\t" \ + ".popsection\n\t" + +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + /* 32-bit only supported on BE */ \ + ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \ ".popsection\n\t" #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ @@ -169,6 +210,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -224,6 +270,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -286,6 +337,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -337,6 +391,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -400,6 +459,11 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -465,6 +529,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) /* cmp cpuid */ @@ -532,6 +602,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* setup for mempcy */ "mr %%r19, %[len]\n\t" "mr %%r20, %[src]\n\t" @@ -601,6 +676,11 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* setup for mempcy */ "mr %%r19, %[len]\n\t" "mr %%r20, %[src]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-s390.h b/tools/testing/selftests/rseq/rseq-s390.h index 1069e85258ce..8ef94ad1cbb4 100644 --- a/tools/testing/selftests/rseq/rseq-s390.h +++ b/tools/testing/selftests/rseq/rseq-s390.h @@ -1,6 +1,13 @@ /* SPDX-License-Identifier: LGPL-2.1 OR MIT */ -#define RSEQ_SIG 0x53053053 +/* + * RSEQ_SIG uses the trap4 instruction. As Linux does not make use of the + * access-register mode nor the linkage stack this instruction will always + * cause a special-operation exception (the trap-enabled bit in the DUCT + * is and will stay 0). The instruction pattern is + * b2 ff 0f ff trap4 4095(%r0) + */ +#define RSEQ_SIG 0xB2FF0FFF #define rseq_smp_mb() __asm__ __volatile__ ("bcr 15,0" ::: "memory") #define rseq_smp_rmb() rseq_smp_mb() @@ -37,22 +44,54 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".quad " __rseq_str(label) "b\n\t" \ + ".popsection\n\t" + +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \ ".popsection\n\t" #elif __s390__ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".long 0x0, " __rseq_str(label) "b\n\t" \ + ".popsection\n\t" + +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \ ".popsection\n\t" #define LONG_L "l" @@ -85,14 +124,14 @@ do { \ ".long " __rseq_str(RSEQ_SIG) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ - "j %l[" __rseq_str(abort_label) "]\n\t" \ + "jg %l[" __rseq_str(abort_label) "]\n\t" \ ".popsection\n\t" #define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \ ".pushsection __rseq_failure, \"ax\"\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ - "j %l[" __rseq_str(cmpfail_label) "]\n\t" \ + "jg %l[" __rseq_str(cmpfail_label) "]\n\t" \ ".popsection\n\t" static inline __attribute__((always_inline)) @@ -102,6 +141,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -160,6 +204,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -220,6 +269,9 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -268,6 +320,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -339,6 +396,12 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) @@ -407,6 +470,11 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif LONG_S " %[src], %[rseq_scratch0]\n\t" LONG_S " %[dst], %[rseq_scratch1]\n\t" LONG_S " %[len], %[rseq_scratch2]\n\t" diff --git a/tools/testing/selftests/rseq/rseq-x86.h b/tools/testing/selftests/rseq/rseq-x86.h index 089410a314e9..b2da6004fe30 100644 --- a/tools/testing/selftests/rseq/rseq-x86.h +++ b/tools/testing/selftests/rseq/rseq-x86.h @@ -7,8 +7,25 @@ #include <stdint.h> +/* + * RSEQ_SIG is used with the following reserved undefined instructions, which + * trap in user-space: + * + * x86-32: 0f b9 3d 53 30 05 53 ud1 0x53053053,%edi + * x86-64: 0f b9 3d 53 30 05 53 ud1 0x53053053(%rip),%edi + */ #define RSEQ_SIG 0x53053053 +/* + * Due to a compiler optimization bug in gcc-8 with asm goto and TLS asm input + * operands, we cannot use "m" input operands, and rather pass the __rseq_abi + * address through a "r" input operand. + */ + +/* Offset of cpu_id and rseq_cs fields in struct rseq. */ +#define RSEQ_CPU_ID_OFFSET 4 +#define RSEQ_CS_OFFSET 8 + #ifdef __x86_64__ #define rseq_smp_mb() \ @@ -37,32 +54,49 @@ do { \ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".quad " __rseq_str(label) "b\n\t" \ ".popsection\n\t" + #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t" \ - "movq %%rax, %[" __rseq_str(rseq_cs) "]\n\t" \ + "movq %%rax, " __rseq_str(rseq_cs) "\n\t" \ __rseq_str(label) ":\n\t" #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \ + "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \ "jnz " __rseq_str(label) "\n\t" #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ ".pushsection __rseq_failure, \"ax\"\n\t" \ - /* Disassembler-friendly signature: nopl <sig>(%rip). */\ - ".byte 0x0f, 0x1f, 0x05\n\t" \ + /* Disassembler-friendly signature: ud1 <sig>(%rip),%edi. */ \ + ".byte 0x0f, 0xb9, 0x3d\n\t" \ ".long " __rseq_str(RSEQ_SIG) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ @@ -83,15 +117,20 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -102,8 +141,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv) @@ -140,16 +178,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[error2]\n\t" @@ -164,8 +207,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot), @@ -199,12 +241,15 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) #endif /* final store */ "addq %[count], %[v]\n\t" @@ -213,8 +258,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [count] "er" (count) @@ -244,15 +288,20 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -266,8 +315,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2), @@ -314,9 +362,15 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" @@ -325,7 +379,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpq %[v2], %[expect2]\n\t" @@ -338,8 +392,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2), @@ -381,18 +434,23 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "movq %[src], %[rseq_scratch0]\n\t" "movq %[dst], %[rseq_scratch1]\n\t" "movq %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "cmpq %[v], %[expect]\n\t" "jnz 7f\n\t" #endif @@ -440,8 +498,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "r" (expect), @@ -520,31 +577,47 @@ do { \ */ #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ start_ip, post_commit_offset, abort_ip) \ - ".pushsection __rseq_table, \"aw\"\n\t" \ + ".pushsection __rseq_cs, \"aw\"\n\t" \ ".balign 32\n\t" \ __rseq_str(label) ":\n\t" \ ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ ".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \ + ".popsection\n\t" \ + ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ + ".long " __rseq_str(label) "b, 0x0\n\t" \ ".popsection\n\t" #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ (post_commit_ip - start_ip), abort_ip) +/* + * Exit points of a rseq critical section consist of all instructions outside + * of the critical section where a critical section can either branch to or + * reach through the normal course of its execution. The abort IP and the + * post-commit IP are already part of the __rseq_cs section and should not be + * explicitly defined as additional exit points. Knowing all exit points is + * useful to assist debuggers stepping over the critical section. + */ +#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ + ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ + ".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \ + ".popsection\n\t" + #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ - "movl $" __rseq_str(cs_label) ", %[rseq_cs]\n\t" \ + "movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t" \ __rseq_str(label) ":\n\t" #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \ + "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \ "jnz " __rseq_str(label) "\n\t" #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ ".pushsection __rseq_failure, \"ax\"\n\t" \ - /* Disassembler-friendly signature: nopl <sig>. */ \ - ".byte 0x0f, 0x1f, 0x05\n\t" \ + /* Disassembler-friendly signature: ud1 <sig>,%edi. */ \ + ".byte 0x0f, 0xb9, 0x3d\n\t" \ ".long " __rseq_str(RSEQ_SIG) "\n\t" \ __rseq_str(label) ":\n\t" \ teardown \ @@ -565,15 +638,20 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -584,8 +662,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv) @@ -622,16 +699,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[error2]\n\t" @@ -646,8 +728,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot), @@ -681,12 +762,15 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) #endif /* final store */ "addl %[count], %[v]\n\t" @@ -695,8 +779,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [count] "ir" (count) @@ -726,15 +809,20 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -749,8 +837,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "m" (newv2), @@ -788,16 +875,21 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[error2]\n\t" @@ -813,8 +905,7 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2), @@ -853,9 +944,15 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3]) +#endif /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" @@ -864,7 +961,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpl %[expect2], %[v2]\n\t" @@ -878,8 +975,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2), @@ -922,19 +1018,24 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "movl %[src], %[rseq_scratch0]\n\t" "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t" @@ -984,8 +1085,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "m" (expect), @@ -1030,19 +1130,24 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail]) +#ifdef RSEQ_COMPARE_TWICE + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1]) + RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2]) +#endif "movl %[src], %[rseq_scratch0]\n\t" "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t" @@ -1093,8 +1198,7 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "m" (expect), diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 4847e97ed049..7159eb777fd3 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -25,18 +25,27 @@ #include <syscall.h> #include <assert.h> #include <signal.h> +#include <limits.h> #include "rseq.h" #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) -__attribute__((tls_model("initial-exec"))) __thread -volatile struct rseq __rseq_abi = { +__thread volatile struct rseq __rseq_abi = { .cpu_id = RSEQ_CPU_ID_UNINITIALIZED, }; -static __attribute__((tls_model("initial-exec"))) __thread -volatile int refcount; +/* + * Shared with other libraries. This library may take rseq ownership if it is + * still 0 when executing the library constructor. Set to 1 by library + * constructor when handling rseq. Set to 0 in destructor if handling rseq. + */ +int __rseq_handled; + +/* Whether this library have ownership of rseq registration. */ +static int rseq_ownership; + +static __thread volatile uint32_t __rseq_refcount; static void signal_off_save(sigset_t *oldset) { @@ -69,8 +78,14 @@ int rseq_register_current_thread(void) int rc, ret = 0; sigset_t oldset; + if (!rseq_ownership) + return 0; signal_off_save(&oldset); - if (refcount++) + if (__rseq_refcount == UINT_MAX) { + ret = -1; + goto end; + } + if (__rseq_refcount++) goto end; rc = sys_rseq(&__rseq_abi, sizeof(struct rseq), 0, RSEQ_SIG); if (!rc) { @@ -78,9 +93,9 @@ int rseq_register_current_thread(void) goto end; } if (errno != EBUSY) - __rseq_abi.cpu_id = -2; + __rseq_abi.cpu_id = RSEQ_CPU_ID_REGISTRATION_FAILED; ret = -1; - refcount--; + __rseq_refcount--; end: signal_restore(oldset); return ret; @@ -91,13 +106,20 @@ int rseq_unregister_current_thread(void) int rc, ret = 0; sigset_t oldset; + if (!rseq_ownership) + return 0; signal_off_save(&oldset); - if (--refcount) + if (!__rseq_refcount) { + ret = -1; + goto end; + } + if (--__rseq_refcount) goto end; rc = sys_rseq(&__rseq_abi, sizeof(struct rseq), RSEQ_FLAG_UNREGISTER, RSEQ_SIG); if (!rc) goto end; + __rseq_refcount = 1; ret = -1; end: signal_restore(oldset); @@ -115,3 +137,20 @@ int32_t rseq_fallback_current_cpu(void) } return cpu; } + +void __attribute__((constructor)) rseq_init(void) +{ + /* Check whether rseq is handled by another library. */ + if (__rseq_handled) + return; + __rseq_handled = 1; + rseq_ownership = 1; +} + +void __attribute__((destructor)) rseq_fini(void) +{ + if (!rseq_ownership) + return; + __rseq_handled = 0; + rseq_ownership = 0; +} diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index c72eb70f9b52..d40d60e7499e 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -16,7 +16,6 @@ #include <errno.h> #include <stdio.h> #include <stdlib.h> -#include <sched.h> #include <linux/rseq.h> /* @@ -45,6 +44,7 @@ #endif extern __thread volatile struct rseq __rseq_abi; +extern int __rseq_handled; #define rseq_likely(x) __builtin_expect(!!(x), 1) #define rseq_unlikely(x) __builtin_expect(!!(x), 0) diff --git a/tools/testing/selftests/rseq/run_param_test.sh b/tools/testing/selftests/rseq/run_param_test.sh index 3acd6d75ff9f..e426304fd4a0 100755 --- a/tools/testing/selftests/rseq/run_param_test.sh +++ b/tools/testing/selftests/rseq/run_param_test.sh @@ -1,6 +1,8 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0+ or MIT +NR_CPUS=`grep '^processor' /proc/cpuinfo | wc -l` + EXTRA_ARGS=${@} OLDIFS="$IFS" @@ -28,15 +30,16 @@ IFS="$OLDIFS" REPS=1000 SLOW_REPS=100 +NR_THREADS=$((6*${NR_CPUS})) function do_tests() { local i=0 while [ "$i" -lt "${#TEST_LIST[@]}" ]; do echo "Running test ${TEST_NAME[$i]}" - ./param_test ${TEST_LIST[$i]} -r ${REPS} ${@} ${EXTRA_ARGS} || exit 1 + ./param_test ${TEST_LIST[$i]} -r ${REPS} -t ${NR_THREADS} ${@} ${EXTRA_ARGS} || exit 1 echo "Running compare-twice test ${TEST_NAME[$i]}" - ./param_test_compare_twice ${TEST_LIST[$i]} -r ${REPS} ${@} ${EXTRA_ARGS} || exit 1 + ./param_test_compare_twice ${TEST_LIST[$i]} -r ${REPS} -t ${NR_THREADS} ${@} ${EXTRA_ARGS} || exit 1 let "i++" done } diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index f69d2ee29742..0fad0dc62338 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -2166,11 +2166,14 @@ TEST(detect_seccomp_filter_flags) SECCOMP_FILTER_FLAG_LOG, SECCOMP_FILTER_FLAG_SPEC_ALLOW, SECCOMP_FILTER_FLAG_NEW_LISTENER }; - unsigned int flag, all_flags; + unsigned int exclusive[] = { + SECCOMP_FILTER_FLAG_TSYNC, + SECCOMP_FILTER_FLAG_NEW_LISTENER }; + unsigned int flag, all_flags, exclusive_mask; int i; long ret; - /* Test detection of known-good filter flags */ + /* Test detection of individual known-good filter flags */ for (i = 0, all_flags = 0; i < ARRAY_SIZE(flags); i++) { int bits = 0; @@ -2197,16 +2200,29 @@ TEST(detect_seccomp_filter_flags) all_flags |= flag; } - /* Test detection of all known-good filter flags */ - ret = seccomp(SECCOMP_SET_MODE_FILTER, all_flags, NULL); - EXPECT_EQ(-1, ret); - EXPECT_EQ(EFAULT, errno) { - TH_LOG("Failed to detect that all known-good filter flags (0x%X) are supported!", - all_flags); + /* + * Test detection of all known-good filter flags combined. But + * for the exclusive flags we need to mask them out and try them + * individually for the "all flags" testing. + */ + exclusive_mask = 0; + for (i = 0; i < ARRAY_SIZE(exclusive); i++) + exclusive_mask |= exclusive[i]; + for (i = 0; i < ARRAY_SIZE(exclusive); i++) { + flag = all_flags & ~exclusive_mask; + flag |= exclusive[i]; + + ret = seccomp(SECCOMP_SET_MODE_FILTER, flag, NULL); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EFAULT, errno) { + TH_LOG("Failed to detect that all known-good filter flags (0x%X) are supported!", + flag); + } } - /* Test detection of an unknown filter flag */ + /* Test detection of an unknown filter flags, without exclusives. */ flag = -1; + flag &= ~exclusive_mask; ret = seccomp(SECCOMP_SET_MODE_FILTER, flag, NULL); EXPECT_EQ(-1, ret); EXPECT_EQ(EINVAL, errno) { @@ -3079,9 +3095,9 @@ TEST(user_notification_basic) /* Check that we get -ENOSYS with no listener attached */ if (pid == 0) { - if (user_trap_syscall(__NR_getpid, 0) < 0) + if (user_trap_syscall(__NR_getppid, 0) < 0) exit(1); - ret = syscall(__NR_getpid); + ret = syscall(__NR_getppid); exit(ret >= 0 || errno != ENOSYS); } @@ -3096,12 +3112,12 @@ TEST(user_notification_basic) EXPECT_EQ(seccomp(SECCOMP_SET_MODE_FILTER, 0, &prog), 0); /* Check that the basic notification machinery works */ - listener = user_trap_syscall(__NR_getpid, + listener = user_trap_syscall(__NR_getppid, SECCOMP_FILTER_FLAG_NEW_LISTENER); ASSERT_GE(listener, 0); /* Installing a second listener in the chain should EBUSY */ - EXPECT_EQ(user_trap_syscall(__NR_getpid, + EXPECT_EQ(user_trap_syscall(__NR_getppid, SECCOMP_FILTER_FLAG_NEW_LISTENER), -1); EXPECT_EQ(errno, EBUSY); @@ -3110,7 +3126,7 @@ TEST(user_notification_basic) ASSERT_GE(pid, 0); if (pid == 0) { - ret = syscall(__NR_getpid); + ret = syscall(__NR_getppid); exit(ret != USER_NOTIF_MAGIC); } @@ -3128,7 +3144,7 @@ TEST(user_notification_basic) EXPECT_GT(poll(&pollfd, 1, -1), 0); EXPECT_EQ(pollfd.revents, POLLOUT); - EXPECT_EQ(req.data.nr, __NR_getpid); + EXPECT_EQ(req.data.nr, __NR_getppid); resp.id = req.id; resp.error = 0; @@ -3160,7 +3176,7 @@ TEST(user_notification_kill_in_middle) TH_LOG("Kernel does not support PR_SET_NO_NEW_PRIVS!"); } - listener = user_trap_syscall(__NR_getpid, + listener = user_trap_syscall(__NR_getppid, SECCOMP_FILTER_FLAG_NEW_LISTENER); ASSERT_GE(listener, 0); @@ -3172,7 +3188,7 @@ TEST(user_notification_kill_in_middle) ASSERT_GE(pid, 0); if (pid == 0) { - ret = syscall(__NR_getpid); + ret = syscall(__NR_getppid); exit(ret != USER_NOTIF_MAGIC); } @@ -3282,7 +3298,7 @@ TEST(user_notification_closed_listener) TH_LOG("Kernel does not support PR_SET_NO_NEW_PRIVS!"); } - listener = user_trap_syscall(__NR_getpid, + listener = user_trap_syscall(__NR_getppid, SECCOMP_FILTER_FLAG_NEW_LISTENER); ASSERT_GE(listener, 0); @@ -3293,7 +3309,7 @@ TEST(user_notification_closed_listener) ASSERT_GE(pid, 0); if (pid == 0) { close(listener); - ret = syscall(__NR_getpid); + ret = syscall(__NR_getppid); exit(ret != -1 && errno != ENOSYS); } @@ -3316,14 +3332,15 @@ TEST(user_notification_child_pid_ns) ASSERT_EQ(unshare(CLONE_NEWUSER | CLONE_NEWPID), 0); - listener = user_trap_syscall(__NR_getpid, SECCOMP_FILTER_FLAG_NEW_LISTENER); + listener = user_trap_syscall(__NR_getppid, + SECCOMP_FILTER_FLAG_NEW_LISTENER); ASSERT_GE(listener, 0); pid = fork(); ASSERT_GE(pid, 0); if (pid == 0) - exit(syscall(__NR_getpid) != USER_NOTIF_MAGIC); + exit(syscall(__NR_getppid) != USER_NOTIF_MAGIC); EXPECT_EQ(ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, &req), 0); EXPECT_EQ(req.pid, pid); @@ -3355,7 +3372,8 @@ TEST(user_notification_sibling_pid_ns) TH_LOG("Kernel does not support PR_SET_NO_NEW_PRIVS!"); } - listener = user_trap_syscall(__NR_getpid, SECCOMP_FILTER_FLAG_NEW_LISTENER); + listener = user_trap_syscall(__NR_getppid, + SECCOMP_FILTER_FLAG_NEW_LISTENER); ASSERT_GE(listener, 0); pid = fork(); @@ -3368,7 +3386,7 @@ TEST(user_notification_sibling_pid_ns) ASSERT_GE(pid2, 0); if (pid2 == 0) - exit(syscall(__NR_getpid) != USER_NOTIF_MAGIC); + exit(syscall(__NR_getppid) != USER_NOTIF_MAGIC); EXPECT_EQ(waitpid(pid2, &status, 0), pid2); EXPECT_EQ(true, WIFEXITED(status)); @@ -3377,11 +3395,11 @@ TEST(user_notification_sibling_pid_ns) } /* Create the sibling ns, and sibling in it. */ - EXPECT_EQ(unshare(CLONE_NEWPID), 0); - EXPECT_EQ(errno, 0); + ASSERT_EQ(unshare(CLONE_NEWPID), 0); + ASSERT_EQ(errno, 0); pid2 = fork(); - EXPECT_GE(pid2, 0); + ASSERT_GE(pid2, 0); if (pid2 == 0) { ASSERT_EQ(ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, &req), 0); @@ -3389,7 +3407,7 @@ TEST(user_notification_sibling_pid_ns) * The pid should be 0, i.e. the task is in some namespace that * we can't "see". */ - ASSERT_EQ(req.pid, 0); + EXPECT_EQ(req.pid, 0); resp.id = req.id; resp.error = 0; @@ -3419,14 +3437,15 @@ TEST(user_notification_fault_recv) ASSERT_EQ(unshare(CLONE_NEWUSER), 0); - listener = user_trap_syscall(__NR_getpid, SECCOMP_FILTER_FLAG_NEW_LISTENER); + listener = user_trap_syscall(__NR_getppid, + SECCOMP_FILTER_FLAG_NEW_LISTENER); ASSERT_GE(listener, 0); pid = fork(); ASSERT_GE(pid, 0); if (pid == 0) - exit(syscall(__NR_getpid) != USER_NOTIF_MAGIC); + exit(syscall(__NR_getppid) != USER_NOTIF_MAGIC); /* Do a bad recv() */ EXPECT_EQ(ioctl(listener, SECCOMP_IOCTL_NOTIF_RECV, NULL), -1); diff --git a/tools/testing/selftests/sigaltstack/Makefile b/tools/testing/selftests/sigaltstack/Makefile index f68fbf80d8be..3e96d5d47036 100644 --- a/tools/testing/selftests/sigaltstack/Makefile +++ b/tools/testing/selftests/sigaltstack/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS = -Wall TEST_GEN_PROGS = sas diff --git a/tools/testing/selftests/sigaltstack/sas.c b/tools/testing/selftests/sigaltstack/sas.c index 228c2ae47687..ad0f8df2ca0a 100644 --- a/tools/testing/selftests/sigaltstack/sas.c +++ b/tools/testing/selftests/sigaltstack/sas.c @@ -109,6 +109,7 @@ int main(void) int err; ksft_print_header(); + ksft_set_plan(3); sigemptyset(&act.sa_mask); act.sa_flags = SA_ONSTACK | SA_SIGINFO; diff --git a/tools/testing/selftests/size/Makefile b/tools/testing/selftests/size/Makefile index 4685b3e421fc..b87facc00a6e 100644 --- a/tools/testing/selftests/size/Makefile +++ b/tools/testing/selftests/size/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS := -static -ffreestanding -nostartfiles -s TEST_GEN_PROGS := get_size diff --git a/tools/testing/selftests/static_keys/Makefile b/tools/testing/selftests/static_keys/Makefile index 9cdadf37f114..aa64104c7860 100644 --- a/tools/testing/selftests/static_keys/Makefile +++ b/tools/testing/selftests/static_keys/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Makefile for static keys selftests # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" diff --git a/tools/testing/selftests/sync/sync_test.c b/tools/testing/selftests/sync/sync_test.c index 7f7938263c5c..3824b66f41a0 100644 --- a/tools/testing/selftests/sync/sync_test.c +++ b/tools/testing/selftests/sync/sync_test.c @@ -86,6 +86,7 @@ int main(void) int err; ksft_print_header(); + ksft_set_plan(3 + 7); sync_api_supported(); diff --git a/tools/testing/selftests/sysctl/Makefile b/tools/testing/selftests/sysctl/Makefile index 95c320b354e8..110301f9f5be 100644 --- a/tools/testing/selftests/sysctl/Makefile +++ b/tools/testing/selftests/sysctl/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Makefile for sysctl selftests. # Expects kernel.sysctl_writes_strict=1. diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh index 780ce7123374..6a970b127c9b 100755 --- a/tools/testing/selftests/sysctl/sysctl.sh +++ b/tools/testing/selftests/sysctl/sysctl.sh @@ -24,19 +24,21 @@ TEST_FILE=$(mktemp) # This represents # -# TEST_ID:TEST_COUNT:ENABLED +# TEST_ID:TEST_COUNT:ENABLED:TARGET # # TEST_ID: is the test id number # TEST_COUNT: number of times we should run the test # ENABLED: 1 if enabled, 0 otherwise +# TARGET: test target file required on the test_sysctl module # # Once these are enabled please leave them as-is. Write your own test, # we have tons of space. -ALL_TESTS="0001:1:1" -ALL_TESTS="$ALL_TESTS 0002:1:1" -ALL_TESTS="$ALL_TESTS 0003:1:1" -ALL_TESTS="$ALL_TESTS 0004:1:1" -ALL_TESTS="$ALL_TESTS 0005:3:1" +ALL_TESTS="0001:1:1:int_0001" +ALL_TESTS="$ALL_TESTS 0002:1:1:string_0001" +ALL_TESTS="$ALL_TESTS 0003:1:1:int_0002" +ALL_TESTS="$ALL_TESTS 0004:1:1:uint_0001" +ALL_TESTS="$ALL_TESTS 0005:3:1:int_0003" +ALL_TESTS="$ALL_TESTS 0006:50:1:bitmap_0001" test_modprobe() { @@ -149,6 +151,9 @@ reset_vals() string_0001) VAL="(none)" ;; + bitmap_0001) + VAL="" + ;; *) ;; esac @@ -157,8 +162,10 @@ reset_vals() set_orig() { - if [ ! -z $TARGET ]; then - echo "${ORIG}" > "${TARGET}" + if [ ! -z $TARGET ] && [ ! -z $ORIG ]; then + if [ -f ${TARGET} ]; then + echo "${ORIG}" > "${TARGET}" + fi fi } @@ -177,9 +184,25 @@ verify() return 0 } +# proc files get read a page at a time, which can confuse diff, +# and get you incorrect results on proc files with long data. To use +# diff against them you must first extract the output to a file, and +# then compare against that file. +verify_diff_proc_file() +{ + TMP_DUMP_FILE=$(mktemp) + cat $1 > $TMP_DUMP_FILE + + if ! diff -w -q $TMP_DUMP_FILE $2; then + return 1 + else + return 0 + fi +} + verify_diff_w() { - echo "$TEST_STR" | diff -q -w -u - $1 + echo "$TEST_STR" | diff -q -w -u - $1 > /dev/null return $? } @@ -600,9 +623,70 @@ run_stringtests() test_rc } +target_exists() +{ + TARGET="${SYSCTL}/$1" + TEST_ID="$2" + + if [ ! -f ${TARGET} ] ; then + echo "Target for test $TEST_ID: $TARGET not exist, skipping test ..." + return 0 + fi + return 1 +} + +run_bitmaptest() { + # Total length of bitmaps string to use, a bit under + # the maximum input size of the test node + LENGTH=$((RANDOM % 65000)) + + # First bit to set + BIT=$((RANDOM % 1024)) + + # String containing our list of bits to set + TEST_STR=$BIT + + # build up the string + while [ "${#TEST_STR}" -le "$LENGTH" ]; do + # Make sure next entry is discontiguous, + # skip ahead at least 2 + BIT=$((BIT + $((2 + RANDOM % 10)))) + + # Add new bit to the list + TEST_STR="${TEST_STR},${BIT}" + + # Randomly make it a range + if [ "$((RANDOM % 2))" -eq "1" ]; then + RANGE_END=$((BIT + $((1 + RANDOM % 10)))) + TEST_STR="${TEST_STR}-${RANGE_END}" + BIT=$RANGE_END + fi + done + + echo -n "Checking bitmap handler... " + TEST_FILE=$(mktemp) + echo -n "$TEST_STR" > $TEST_FILE + + cat $TEST_FILE > $TARGET 2> /dev/null + if [ $? -ne 0 ]; then + echo "FAIL" >&2 + rc=1 + test_rc + fi + + if ! verify_diff_proc_file "$TARGET" "$TEST_FILE"; then + echo "FAIL" >&2 + rc=1 + else + echo "ok" + rc=0 + fi + test_rc +} + sysctl_test_0001() { - TARGET="${SYSCTL}/int_0001" + TARGET="${SYSCTL}/$(get_test_target 0001)" reset_vals ORIG=$(cat "${TARGET}") TEST_STR=$(( $ORIG + 1 )) @@ -614,7 +698,7 @@ sysctl_test_0001() sysctl_test_0002() { - TARGET="${SYSCTL}/string_0001" + TARGET="${SYSCTL}/$(get_test_target 0002)" reset_vals ORIG=$(cat "${TARGET}") TEST_STR="Testing sysctl" @@ -627,7 +711,7 @@ sysctl_test_0002() sysctl_test_0003() { - TARGET="${SYSCTL}/int_0002" + TARGET="${SYSCTL}/$(get_test_target 0003)" reset_vals ORIG=$(cat "${TARGET}") TEST_STR=$(( $ORIG + 1 )) @@ -640,7 +724,7 @@ sysctl_test_0003() sysctl_test_0004() { - TARGET="${SYSCTL}/uint_0001" + TARGET="${SYSCTL}/$(get_test_target 0004)" reset_vals ORIG=$(cat "${TARGET}") TEST_STR=$(( $ORIG + 1 )) @@ -653,13 +737,21 @@ sysctl_test_0004() sysctl_test_0005() { - TARGET="${SYSCTL}/int_0003" + TARGET="${SYSCTL}/$(get_test_target 0005)" reset_vals ORIG=$(cat "${TARGET}") run_limit_digit_int_array } +sysctl_test_0006() +{ + TARGET="${SYSCTL}/bitmap_0001" + reset_vals + ORIG="" + run_bitmaptest +} + list_tests() { echo "Test ID list:" @@ -673,10 +765,9 @@ list_tests() echo "0003 x $(get_test_count 0003) - tests proc_dointvec()" echo "0004 x $(get_test_count 0004) - tests proc_douintvec()" echo "0005 x $(get_test_count 0005) - tests proc_douintvec() array" + echo "0006 x $(get_test_count 0006) - tests proc_do_large_bitmap()" } -test_reqs - usage() { NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .) @@ -724,25 +815,35 @@ function get_test_count() { test_num $1 TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}') - LAST_TWO=${TEST_DATA#*:*} - echo ${LAST_TWO%:*} + echo ${TEST_DATA} | awk -F":" '{print $2}' } function get_test_enabled() { test_num $1 TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}') - echo ${TEST_DATA#*:*:} + echo ${TEST_DATA} | awk -F":" '{print $3}' +} + +function get_test_target() +{ + test_num $1 + TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}') + echo ${TEST_DATA} | awk -F":" '{print $4}' } function run_all_tests() { for i in $ALL_TESTS ; do - TEST_ID=${i%:*:*} + TEST_ID=${i%:*:*:*} ENABLED=$(get_test_enabled $TEST_ID) TEST_COUNT=$(get_test_count $TEST_ID) + TEST_TARGET=$(get_test_target $TEST_ID) + if target_exists $TEST_TARGET $TEST_ID; then + continue + fi if [[ $ENABLED -eq "1" ]]; then - test_case $TEST_ID $TEST_COUNT + test_case $TEST_ID $TEST_COUNT $TEST_TARGET fi done } @@ -775,12 +876,14 @@ function watch_case() function test_case() { - NUM_TESTS=$DEFAULT_NUM_TESTS - if [ $# -eq 2 ]; then - NUM_TESTS=$2 - fi + NUM_TESTS=$2 i=0 + + if target_exists $3 $1; then + continue + fi + while [ $i -lt $NUM_TESTS ]; do test_num $1 watch_log $i ${TEST_NAME}_test_$1 noclear @@ -803,15 +906,15 @@ function parse_args() elif [[ "$1" = "-t" ]]; then shift test_num $1 - test_case $1 $(get_test_count $1) + test_case $1 $(get_test_count $1) $(get_test_target $1) elif [[ "$1" = "-c" ]]; then shift test_num $1 test_num $2 - test_case $1 $2 + test_case $1 $2 $(get_test_target $1) elif [[ "$1" = "-s" ]]; then shift - test_case $1 1 + test_case $1 1 $(get_test_target $1) elif [[ "$1" = "-l" ]]; then list_tests elif [[ "$1" = "-h" || "$1" = "--help" ]]; then @@ -825,8 +928,8 @@ function parse_args() test_reqs allow_user_defaults check_production_sysctl_writes_strict -test_modprobe load_req_mod +test_modprobe trap "test_finish" EXIT diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json index b73ceb9e28b1..0d319f1d01db 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json @@ -47,5 +47,908 @@ "teardown": [ "$TC actions flush action pedit" ] + }, + { + "id": "377e", + "name": "Add pedit action with RAW_OP offset u32", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u32 set 0x90abcdef", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "12: val 90abcdef mask 00000000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "a0ca", + "name": "Add pedit action with RAW_OP offset u32 (INVALID)", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 2 u32 set 0x12345678", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "dd8a", + "name": "Add pedit action with RAW_OP offset u16 u16", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u16 set 0x1234 munge offset 14 u16 set 0x5678", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12340000 mask 0000ffff.*val 00005678 mask ffff0000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "53db", + "name": "Add pedit action with RAW_OP offset u16 (INVALID)", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 15 u16 set 0x1234", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "5c7e", + "name": "Add pedit action with RAW_OP offset u8 add value", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge offset 16 u8 add 0xf", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 16: add 0f000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "2893", + "name": "Add pedit action with RAW_OP offset u8 quad", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u8 set 0x12 munge offset 13 u8 set 0x34 munge offset 14 u8 set 0x56 munge offset 15 u8 set 0x78", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12000000 mask 00ffffff.*val 00340000 mask ff00ffff.*val 00005600 mask ffff00ff.*val 00000078 mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3a07", + "name": "Add pedit action with RAW_OP offset u8-u16-u8", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0 u8 set 0x12 munge offset 1 u16 set 0x3456 munge offset 3 u8 set 0x78", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12000000 mask 00ffffff.*val 00345600 mask ff0000ff.*val 00000078 mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "ab0f", + "name": "Add pedit action with RAW_OP offset u16-u8-u8", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0 u16 set 0x1234 munge offset 2 u8 set 0x56 munge offset 3 u8 set 0x78", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12340000 mask 0000ffff.*val 00005600 mask ffff00ff.*val 00000078 mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "9d12", + "name": "Add pedit action with RAW_OP offset u32 set u16 clear u8 invert", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0 u32 set 0x12345678 munge offset 1 u16 clear munge offset 2 u8 invert", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "val 12345678 mask 00000000.*val 00000000 mask ff0000ff.*val 0000ff00 mask ffffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "ebfa", + "name": "Add pedit action with RAW_OP offset overflow u32 (INVALID)", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 0xffffffffffffffffffffffffffffffffffffffffff u32 set 0x1", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "f512", + "name": "Add pedit action with RAW_OP offset u16 at offmask shift set", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u16 at 12 ffff 1 set 0xaaaa", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 12: val aaaa0000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "c2cb", + "name": "Add pedit action with RAW_OP offset u32 retain value", + "category": [ + "actions", + "pedit", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge offset 12 u32 set 0x12345678 retain 0xff00", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 12: val 00005600 mask ffff00ff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "86d4", + "name": "Add pedit action with LAYERED_OP eth set src & dst", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set 11:22:33:44:55:66 munge eth dst set ff:ee:dd:cc:bb:aa", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+4: val 00001122 mask ffff0000.*eth\\+8: val 33445566 mask 00000000.*eth\\+0: val ffeeddcc mask 00000000.*eth\\+4: val bbaa0000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "c715", + "name": "Add pedit action with LAYERED_OP eth set src (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set %e:11:m2:33:x4:-5", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "ba22", + "name": "Add pedit action with LAYERED_OP eth type set/clear sequence", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear munge eth type set 0x1 munge eth type clear", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff.*eth\\+12: val 00010000 mask 0000ffff.*eth\\+12: val 00000000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "5810", + "name": "Add pedit action with LAYERED_OP ip set src & dst", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip src set 18.52.86.120 munge ip dst set 18.52.86.120", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 12: val 12345678 mask 00000000.* 16: val 12345678 mask 00000000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "1092", + "name": "Add pedit action with LAYERED_OP ip set ihl & dsfield", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ihl set 0xff munge ip dsfield set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 0: val 0f000000 mask f0ffffff.* 0: val 00ff0000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "02d8", + "name": "Add pedit action with LAYERED_OP ip set ttl & protocol", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl set 0x1 munge ip protocol set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 8: val 01000000 mask 00ffffff.* 8: val 00ff0000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3e2d", + "name": "Add pedit action with LAYERED_OP ip set ttl (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl set 300", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "31ae", + "name": "Add pedit action with LAYERED_OP ip ttl clear/set", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl clear munge ip ttl set 0x1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 8: val 00000000 mask 00ffffff.* 8: val 01000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "486f", + "name": "Add pedit action with LAYERED_OP ip set duplicate fields", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ttl set 0x1 munge ip ttl set 0x1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 8: val 01000000 mask 00ffffff.* 8: val 01000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "e790", + "name": "Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip ce set 0xff munge ip df set 0xff munge ip mf set 0xff munge ip firstfrag set 0xff munge ip nofrag set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 4: val 00008000 mask ffff7fff.* 4: val 00004000 mask ffffbfff.* 4: val 00002000 mask ffffdfff.* 4: val 00001f00 mask ffffe0ff.* 4: val 00003f00 mask ffffc0ff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6829", + "name": "Add pedit action with LAYERED_OP beyond ip set dport & sport", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip dport set 0x1234 munge ip sport set 0x5678", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 20: val 00001234 mask ffff0000.* 20: val 56780000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "afd8", + "name": "Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit munge ip icmp_type set 0xff munge ip icmp_code set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": " 20: val ff000000 mask 00ffffff.* 20: val ff000000 mask 00ffffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3143", + "name": "Add pedit action with LAYERED_OP beyond ip set dport (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip dport set 0x1234", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "fc1f", + "name": "Add pedit action with LAYERED_OP ip6 set src & dst", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 src set 2001:0db8:0:f101::1 munge ip6 dst set 2001:0db8:0:f101::1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "ipv6\\+8: val 20010db8 mask 00000000.*ipv6\\+12: val 0000f101 mask 00000000.*ipv6\\+16: val 00000000 mask 00000000.*ipv6\\+20: val 00000001 mask 00000000.*ipv6\\+24: val 20010db8 mask 00000000.*ipv6\\+28: val 0000f101 mask 00000000.*ipv6\\+32: val 00000000 mask 00000000.*ipv6\\+36: val 00000001 mask 00000000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6d34", + "name": "Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 dst set 2001:0db8:0:f101::1 retain 0xff0000", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6f5e", + "name": "Add pedit action with LAYERED_OP ip6 flow_lbl", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 flow_lbl set 0xfffff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "ipv6\\+0: val 0007ffff mask fff80000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "6795", + "name": "Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge ip6 payload_len set 0xffff munge ip6 nexthdr set 0xff munge ip6 hoplimit set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "ipv6\\+4: val ffff0000 mask 0000ffff.*ipv6\\+4: val 0000ff00 mask ffff00ff.*ipv6\\+4: val 000000ff mask ffffff00", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "1442", + "name": "Add pedit action with LAYERED_OP tcp set dport & sport", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp dport set 4789 munge tcp sport set 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "tcp\\+0: val 000012b5 mask ffff0000.*tcp\\+0: val 00010000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "b7ac", + "name": "Add pedit action with LAYERED_OP tcp sport set (INVALID)", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp sport set -200", + "expExitCode": "255", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "cfcc", + "name": "Add pedit action with LAYERED_OP tcp flags set", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp flags set 0x16", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "tcp\\+12: val 00160000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "3bc4", + "name": "Add pedit action with LAYERED_OP tcp set dport, sport & flags fields", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge tcp dport set 4789 munge tcp sport set 1 munge tcp flags set 0x1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "tcp\\+0: val 000012b5 mask ffff0000.*tcp\\+0: val 00010000 mask 0000ffff.*tcp\\+12: val 00010000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "f1c8", + "name": "Add pedit action with LAYERED_OP udp set dport & sport", + "category": [ + "actions", + "pedit", + "layered_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge udp dport set 4789 munge udp sport set 4789", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "udp\\+0: val 000012b5 mask ffff0000.*udp\\+0: val 12b50000 mask 0000ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "d784", + "name": "Add pedit action with mixed RAW/LAYERED_OP #1", + "category": [ + "actions", + "pedit", + "layered_op", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set 11:22:33:44:55:66 munge ip ttl set 0xff munge tcp flags clear munge offset 15 u8 add 40 retain 0xf0 munge udp dport add 1", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+4: val 00001122 mask ffff0000.*eth\\+8: val 33445566 mask 00000000.*ipv4\\+8: val ff000000 mask 00ffffff.*tcp\\+12: val 00000000 mask ff00ffff.* 12: add 00000020 mask ffffff0f.*udp\\+0: add 00000001 mask ffff0000", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] + }, + { + "id": "70ca", + "name": "Add pedit action with mixed RAW/LAYERED_OP #2", + "category": [ + "actions", + "pedit", + "layered_op", + "raw_op" + ], + "setup": [ + [ + "$TC actions flush action pedit", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action pedit ex munge eth src set 11:22:33:44:55:66 munge eth dst set ff:ee:dd:cc:bb:aa munge ip6 payload_len set 0xffff munge ip6 nexthdr set 0xff munge ip6 hoplimit preserve munge offset 0 u8 set 0x12 munge offset 1 u16 set 0x3456 munge offset 3 u8 set 0x78 munge ip ttl set 0xaa munge ip protocol set 0xff", + "expExitCode": "0", + "verifyCmd": "$TC actions list action pedit | grep 'key '", + "matchPattern": "eth\\+4: val 00001122 mask ffff0000.*eth\\+8: val 33445566 mask 00000000.*eth\\+0: val ffeeddcc mask 00000000.*eth\\+4: val bbaa0000 mask 0000ffff.*ipv6\\+4: val ffff0000 mask 0000ffff.*ipv6\\+4: val 0000ff00 mask ffff00ff.*ipv6\\+4: val 00000000 mask ffffffff.* 0: val 12000000 mask 00ffffff.* 0: val 00345600 mask ff0000ff.* 0: val 00000078 mask ffffff00.*ipv4\\+8: val aa000000 mask 00ffffff.*ipv4\\+8: val 00ff0000 mask ff00ffff", + "matchCount": "1", + "teardown": [ + "$TC actions flush action pedit" + ] } + ] diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json b/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json index 27f0acaed880..ddabb160a11b 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json @@ -144,6 +144,30 @@ ] }, { + "id": "7571", + "name": "Add sample action with invalid rate", + "category": [ + "actions", + "sample" + ], + "setup": [ + [ + "$TC actions flush action sample", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "$TC actions add action sample rate 0 group 1 index 2", + "expExitCode": "255", + "verifyCmd": "$TC actions get action sample index 2", + "matchPattern": "action order [0-9]+: sample rate 1/0 group 1.*index 2 ref", + "matchCount": "0", + "teardown": [ + "$TC actions flush action sample" + ] + }, + { "id": "b6d4", "name": "Add sample action with mandatory arguments and invalid control action", "category": [ diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json index 99a5ffca1088..e2f92cefb8d5 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json @@ -19,6 +19,26 @@ ] }, { + "id": "2638", + "name": "Add matchall and try to get it", + "category": [ + "filter", + "matchall" + ], + "setup": [ + "$TC qdisc add dev $DEV1 clsact", + "$TC filter add dev $DEV1 protocol all pref 1 ingress handle 0x1234 matchall action ok" + ], + "cmdUnderTest": "$TC filter get dev $DEV1 protocol all pref 1 ingress handle 0x1234 matchall", + "expExitCode": "0", + "verifyCmd": "$TC filter show dev $DEV1 ingress", + "matchPattern": "filter protocol all pref 1 matchall chain 0 handle 0x1234", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV1 clsact" + ] + }, + { "id": "d052", "name": "Add 1M filters with the same action", "category": [ @@ -38,5 +58,25 @@ "$TC qdisc del dev $DEV2 ingress", "/bin/rm $BATCH_FILE" ] + }, + { + "id": "4cbd", + "name": "Try to add filter with duplicate key", + "category": [ + "filter", + "flower" + ], + "setup": [ + "$TC qdisc add dev $DEV2 ingress", + "$TC filter add dev $DEV2 protocol ip prio 1 parent ffff: flower dst_mac e4:11:22:11:4a:51 src_mac e4:11:22:11:4a:50 ip_proto tcp src_ip 1.1.1.1 dst_ip 2.2.2.2 action drop" + ], + "cmdUnderTest": "$TC filter add dev $DEV2 protocol ip prio 1 parent ffff: flower dst_mac e4:11:22:11:4a:51 src_mac e4:11:22:11:4a:50 ip_proto tcp src_ip 1.1.1.1 dst_ip 2.2.2.2 action drop", + "expExitCode": "2", + "verifyCmd": "$TC -s filter show dev $DEV2 ingress", + "matchPattern": "filter protocol ip pref 1 flower chain 0 handle", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DEV2 ingress" + ] } ] diff --git a/tools/testing/selftests/timers/skew_consistency.c b/tools/testing/selftests/timers/skew_consistency.c index 022b711c78ee..8066be9aff11 100644 --- a/tools/testing/selftests/timers/skew_consistency.c +++ b/tools/testing/selftests/timers/skew_consistency.c @@ -32,7 +32,6 @@ #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> -#include <stdlib.h> #include <string.h> #include <sys/wait.h> #include "../kselftest.h" diff --git a/tools/testing/selftests/tmpfs/Makefile b/tools/testing/selftests/tmpfs/Makefile index 953c81299181..aa11ccc92e5b 100644 --- a/tools/testing/selftests/tmpfs/Makefile +++ b/tools/testing/selftests/tmpfs/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CFLAGS += -Wall -O2 CFLAGS += -D_GNU_SOURCE diff --git a/tools/testing/selftests/tpm2/tpm2.py b/tools/testing/selftests/tpm2/tpm2.py index 40ea95ce2ead..828c18584624 100644 --- a/tools/testing/selftests/tpm2/tpm2.py +++ b/tools/testing/selftests/tpm2/tpm2.py @@ -22,6 +22,7 @@ TPM2_CC_UNSEAL = 0x015E TPM2_CC_FLUSH_CONTEXT = 0x0165 TPM2_CC_START_AUTH_SESSION = 0x0176 TPM2_CC_GET_CAPABILITY = 0x017A +TPM2_CC_GET_RANDOM = 0x017B TPM2_CC_PCR_READ = 0x017E TPM2_CC_POLICY_PCR = 0x017F TPM2_CC_PCR_EXTEND = 0x0182 @@ -357,9 +358,9 @@ class Client: self.flags = flags if (self.flags & Client.FLAG_SPACE) == 0: - self.tpm = open('/dev/tpm0', 'r+b') + self.tpm = open('/dev/tpm0', 'r+b', buffering=0) else: - self.tpm = open('/dev/tpmrm0', 'r+b') + self.tpm = open('/dev/tpmrm0', 'r+b', buffering=0) def close(self): self.tpm.close() diff --git a/tools/testing/selftests/tpm2/tpm2_tests.py b/tools/testing/selftests/tpm2/tpm2_tests.py index 3bb066fea4a0..d4973be53493 100644 --- a/tools/testing/selftests/tpm2/tpm2_tests.py +++ b/tools/testing/selftests/tpm2/tpm2_tests.py @@ -158,6 +158,69 @@ class SmokeTest(unittest.TestCase): pass self.assertEqual(rejected, True) + def test_read_partial_resp(self): + try: + fmt = '>HIIH' + cmd = struct.pack(fmt, + tpm2.TPM2_ST_NO_SESSIONS, + struct.calcsize(fmt), + tpm2.TPM2_CC_GET_RANDOM, + 0x20) + self.client.tpm.write(cmd) + hdr = self.client.tpm.read(10) + sz = struct.unpack('>I', hdr[2:6])[0] + rsp = self.client.tpm.read() + except: + pass + self.assertEqual(sz, 10 + 2 + 32) + self.assertEqual(len(rsp), 2 + 32) + + def test_read_partial_overwrite(self): + try: + fmt = '>HIIH' + cmd = struct.pack(fmt, + tpm2.TPM2_ST_NO_SESSIONS, + struct.calcsize(fmt), + tpm2.TPM2_CC_GET_RANDOM, + 0x20) + self.client.tpm.write(cmd) + # Read part of the respone + rsp1 = self.client.tpm.read(15) + + # Send a new cmd + self.client.tpm.write(cmd) + + # Read the whole respone + rsp2 = self.client.tpm.read() + except: + pass + self.assertEqual(len(rsp1), 15) + self.assertEqual(len(rsp2), 10 + 2 + 32) + + def test_send_two_cmds(self): + rejected = False + try: + fmt = '>HIIH' + cmd = struct.pack(fmt, + tpm2.TPM2_ST_NO_SESSIONS, + struct.calcsize(fmt), + tpm2.TPM2_CC_GET_RANDOM, + 0x20) + self.client.tpm.write(cmd) + + # expect the second one to raise -EBUSY error + self.client.tpm.write(cmd) + rsp = self.client.tpm.read() + + except IOError, e: + # read the response + rsp = self.client.tpm.read() + rejected = True + pass + except: + pass + self.assertEqual(rejected, True) + class SpaceTest(unittest.TestCase): def setUp(self): logging.basicConfig(filename='SpaceTest.log', level=logging.DEBUG) diff --git a/tools/testing/selftests/user/Makefile b/tools/testing/selftests/user/Makefile index d401b63c5b1a..640a40f9b72b 100644 --- a/tools/testing/selftests/user/Makefile +++ b/tools/testing/selftests/user/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # Makefile for user memory selftests # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" diff --git a/tools/testing/selftests/x86/mpx-dig.c b/tools/testing/selftests/x86/mpx-dig.c index c13607ef5c11..880fbf676968 100644 --- a/tools/testing/selftests/x86/mpx-dig.c +++ b/tools/testing/selftests/x86/mpx-dig.c @@ -8,9 +8,7 @@ #include <unistd.h> #include <stdio.h> #include <errno.h> -#include <sys/types.h> #include <sys/stat.h> -#include <unistd.h> #include <sys/mman.h> #include <string.h> #include <fcntl.h> diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index b9566a6478a9..114863d9fb87 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -1,16 +1,7 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later # Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved. # -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# # Test creates several zram devices with different filesystems on them. # It fills each device with zeros and checks that compression works. # diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index 74569b883737..e83b404807c0 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -1,16 +1,7 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later # Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved. # -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# # Test checks that we can create swap zram device. # # Author: Alexey Kodanev <alexey.kodanev@oracle.com> diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 9e73a4fb9b0a..6f872f266fd1 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -1,16 +1,7 @@ #!/bin/sh +# SPDX-License-Identifier: GPL-2.0-or-later # Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved. # -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# # Author: Alexey Kodanev <alexey.kodanev@oracle.com> # Modified: Naresh Kamboju <naresh.kamboju@linaro.org> diff --git a/tools/testing/vsock/Makefile b/tools/testing/vsock/Makefile index 66ba0924194d..5be687b1e16c 100644 --- a/tools/testing/vsock/Makefile +++ b/tools/testing/vsock/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only all: test test: vsock_diag_test vsock_diag_test: vsock_diag_test.o timeout.o control.o diff --git a/tools/usb/ffs-aio-example/simple/host_app/Makefile b/tools/usb/ffs-aio-example/simple/host_app/Makefile index 8c4a6f0aa82d..c3523837c936 100644 --- a/tools/usb/ffs-aio-example/simple/host_app/Makefile +++ b/tools/usb/ffs-aio-example/simple/host_app/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only CC = gcc LIBUSB_CFLAGS = $(shell pkg-config --cflags libusb-1.0) LIBUSB_LIBS = $(shell pkg-config --libs libusb-1.0) diff --git a/tools/usb/usbip/libsrc/usbip_device_driver.c b/tools/usb/usbip/libsrc/usbip_device_driver.c index ec3a0b794f15..5a3726eb44ab 100644 --- a/tools/usb/usbip/libsrc/usbip_device_driver.c +++ b/tools/usb/usbip/libsrc/usbip_device_driver.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 Karol Kosik <karo9@interia.eu> * 2015 Samsung Electronics @@ -6,19 +7,6 @@ * Based on tools/usb/usbip/libsrc/usbip_host_driver.c, which is: * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <fcntl.h> diff --git a/tools/usb/usbip/libsrc/usbip_device_driver.h b/tools/usb/usbip/libsrc/usbip_device_driver.h index 54cb658b37a3..1ce0bbd75f34 100644 --- a/tools/usb/usbip/libsrc/usbip_device_driver.h +++ b/tools/usb/usbip/libsrc/usbip_device_driver.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015 Karol Kosik <karo9@interia.eu> * 2015 Samsung Electronics @@ -6,19 +7,6 @@ * Based on tools/usb/usbip/libsrc/usbip_host_driver.c, which is: * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __USBIP_DEVICE_DRIVER_H diff --git a/tools/usb/usbip/libsrc/usbip_host_common.c b/tools/usb/usbip/libsrc/usbip_host_common.c index d79c7581b175..2813aa821c82 100644 --- a/tools/usb/usbip/libsrc/usbip_host_common.c +++ b/tools/usb/usbip/libsrc/usbip_host_common.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015-2016 Samsung Electronics * Igor Kotrasinski <i.kotrasinsk@samsung.com> @@ -6,19 +7,6 @@ * Refactored from usbip_host_driver.c, which is: * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <sys/types.h> diff --git a/tools/usb/usbip/libsrc/usbip_host_common.h b/tools/usb/usbip/libsrc/usbip_host_common.h index a64b8033fe64..f46967c0aa18 100644 --- a/tools/usb/usbip/libsrc/usbip_host_common.h +++ b/tools/usb/usbip/libsrc/usbip_host_common.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2015-2016 Samsung Electronics * Igor Kotrasinski <i.kotrasinsk@samsung.com> @@ -6,19 +7,6 @@ * Refactored from usbip_host_driver.c, which is: * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __USBIP_HOST_COMMON_H diff --git a/tools/usb/usbip/libsrc/usbip_host_driver.c b/tools/usb/usbip/libsrc/usbip_host_driver.c index 4de6edc54d35..573e73ec36bd 100644 --- a/tools/usb/usbip/libsrc/usbip_host_driver.c +++ b/tools/usb/usbip/libsrc/usbip_host_driver.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi * Copyright (C) 2015-2016 Samsung Electronics * Igor Kotrasinski <i.kotrasinsk@samsung.com> * Krzysztof Opasiak <k.opasiak@samsung.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <unistd.h> diff --git a/tools/usb/usbip/libsrc/usbip_host_driver.h b/tools/usb/usbip/libsrc/usbip_host_driver.h index 77f07e72a7fe..6ba996c5a709 100644 --- a/tools/usb/usbip/libsrc/usbip_host_driver.h +++ b/tools/usb/usbip/libsrc/usbip_host_driver.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi * Copyright (C) 2015-2016 Samsung Electronics * Igor Kotrasinski <i.kotrasinsk@samsung.com> * Krzysztof Opasiak <k.opasiak@samsung.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __USBIP_HOST_DRIVER_H diff --git a/tools/usb/usbip/src/usbip.c b/tools/usb/usbip/src/usbip.c index 73d8eee8130b..f7c7220d9766 100644 --- a/tools/usb/usbip/src/usbip.c +++ b/tools/usb/usbip/src/usbip.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * command structure borrowed from udev * (git://git.kernel.org/pub/scm/linux/hotplug/udev.git) * * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <stdio.h> diff --git a/tools/usb/usbip/src/usbip.h b/tools/usb/usbip/src/usbip.h index 84fe66a9d8ad..e31779290601 100644 --- a/tools/usb/usbip/src/usbip.h +++ b/tools/usb/usbip/src/usbip.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __USBIP_H diff --git a/tools/usb/usbip/src/usbip_attach.c b/tools/usb/usbip/src/usbip_attach.c index ba88728483ff..b4aeb9f1f493 100644 --- a/tools/usb/usbip/src/usbip_attach.c +++ b/tools/usb/usbip/src/usbip_attach.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi * Copyright (C) 2015-2016 Samsung Electronics * Igor Kotrasinski <i.kotrasinsk@samsung.com> * Krzysztof Opasiak <k.opasiak@samsung.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <sys/stat.h> diff --git a/tools/usb/usbip/src/usbip_bind.c b/tools/usb/usbip/src/usbip_bind.c index e121cfb1746a..f1cf9225a69c 100644 --- a/tools/usb/usbip/src/usbip_bind.c +++ b/tools/usb/usbip/src/usbip_bind.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <libudev.h> diff --git a/tools/usb/usbip/src/usbip_detach.c b/tools/usb/usbip/src/usbip_detach.c index 777f7286a0c5..aec993159036 100644 --- a/tools/usb/usbip/src/usbip_detach.c +++ b/tools/usb/usbip/src/usbip_detach.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <ctype.h> diff --git a/tools/usb/usbip/src/usbip_list.c b/tools/usb/usbip/src/usbip_list.c index 8d4ccf4b9480..8625b0f514ee 100644 --- a/tools/usb/usbip/src/usbip_list.c +++ b/tools/usb/usbip/src/usbip_list.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi * Copyright (C) 2015-2016 Samsung Electronics * Igor Kotrasinski <i.kotrasinsk@samsung.com> * Krzysztof Opasiak <k.opasiak@samsung.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <sys/types.h> diff --git a/tools/usb/usbip/src/usbip_network.c b/tools/usb/usbip/src/usbip_network.c index 8ffcd47d9638..d595d72693fb 100644 --- a/tools/usb/usbip/src/usbip_network.c +++ b/tools/usb/usbip/src/usbip_network.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <sys/socket.h> diff --git a/tools/usb/usbip/src/usbip_unbind.c b/tools/usb/usbip/src/usbip_unbind.c index a4a496c9cbaf..66a44d4a0d56 100644 --- a/tools/usb/usbip/src/usbip_unbind.c +++ b/tools/usb/usbip/src/usbip_unbind.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <libudev.h> diff --git a/tools/usb/usbip/src/usbipd.c b/tools/usb/usbip/src/usbipd.c index 32864c52942d..48398a78e88a 100644 --- a/tools/usb/usbip/src/usbipd.c +++ b/tools/usb/usbip/src/usbipd.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi * Copyright (C) 2015-2016 Samsung Electronics * Igor Kotrasinski <i.kotrasinsk@samsung.com> * Krzysztof Opasiak <k.opasiak@samsung.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifdef HAVE_CONFIG_H diff --git a/tools/usb/usbip/src/utils.c b/tools/usb/usbip/src/utils.c index 3d7b42e77299..76a2e1247f33 100644 --- a/tools/usb/usbip/src/utils.c +++ b/tools/usb/usbip/src/utils.c @@ -1,19 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <errno.h> diff --git a/tools/usb/usbip/src/utils.h b/tools/usb/usbip/src/utils.h index 5916fd3e02a6..4fc13854f7b9 100644 --- a/tools/usb/usbip/src/utils.h +++ b/tools/usb/usbip/src/utils.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2011 matt mooney <mfm@muteddisk.com> * 2005-2007 Takahiro Hirofuchi - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __UTILS_H diff --git a/tools/virtio/ringtest/ptr_ring.c b/tools/virtio/ringtest/ptr_ring.c index 2d566fbd236b..c9b26335f891 100644 --- a/tools/virtio/ringtest/ptr_ring.c +++ b/tools/virtio/ringtest/ptr_ring.c @@ -18,7 +18,6 @@ #define ALIGN(x, a) (((x) + (a) - 1) / (a) * (a)) #define SIZE_MAX (~(size_t)0) #define KMALLOC_MAX_SIZE SIZE_MAX -#define BUG_ON(x) assert(x) typedef pthread_spinlock_t spinlock_t; diff --git a/tools/virtio/vhost_test/Makefile b/tools/virtio/vhost_test/Makefile index a1d35b81b314..94d3aff987dc 100644 --- a/tools/virtio/vhost_test/Makefile +++ b/tools/virtio/vhost_test/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only obj-m += vhost_test.o EXTRA_CFLAGS += -Idrivers/vhost diff --git a/tools/wmi/Makefile b/tools/wmi/Makefile index e0e87239126b..e161ff59ec46 100644 --- a/tools/wmi/Makefile +++ b/tools/wmi/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only PREFIX ?= /usr SBINDIR ?= sbin INSTALL ?= install |