diff options
Diffstat (limited to 'tools/testing/selftests/net')
| -rw-r--r-- | tools/testing/selftests/net/Makefile | 4 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/fcnal-test.sh | 3432 | ||||
| -rw-r--r-- | tools/testing/selftests/net/forwarding/devlink_lib.sh | 189 | ||||
| -rw-r--r-- | tools/testing/selftests/net/forwarding/lib.sh | 19 | ||||
| -rw-r--r-- | tools/testing/selftests/net/forwarding/tc_common.sh | 17 | ||||
| -rw-r--r-- | tools/testing/selftests/net/l2tp.sh | 382 | ||||
| -rw-r--r-- | tools/testing/selftests/net/nettest.c | 1757 |
7 files changed, 5773 insertions, 27 deletions
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 1b24e36b4047..0bd6b23c97ef 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -10,9 +10,9 @@ TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh -TEST_PROGS += tcp_fastopen_backup_key.sh +TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh TEST_PROGS_EXTENDED := in_netns.sh -TEST_GEN_FILES = socket +TEST_GEN_FILES = socket nettest TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any TEST_GEN_FILES += tcp_mmap tcp_inq psock_snd txring_overwrite TEST_GEN_FILES += udpgso udpgso_bench_tx udpgso_bench_rx ip_defrag diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh new file mode 100755 index 000000000000..9fd3a0b97f0d --- /dev/null +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -0,0 +1,3432 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2019 David Ahern <dsahern@gmail.com>. All rights reserved. +# +# IPv4 and IPv6 functional tests focusing on VRF and routing lookups +# for various permutations: +# 1. icmp, tcp, udp and netfilter +# 2. client, server, no-server +# 3. global address on interface +# 4. global address on 'lo' +# 5. remote and local traffic +# 6. VRF and non-VRF permutations +# +# Setup: +# ns-A | ns-B +# No VRF case: +# [ lo ] [ eth1 ]---|---[ eth1 ] [ lo ] +# remote address +# VRF case: +# [ red ]---[ eth1 ]---|---[ eth1 ] [ lo ] +# +# ns-A: +# eth1: 172.16.1.1/24, 2001:db8:1::1/64 +# lo: 127.0.0.1/8, ::1/128 +# 172.16.2.1/32, 2001:db8:2::1/128 +# red: 127.0.0.1/8, ::1/128 +# 172.16.3.1/32, 2001:db8:3::1/128 +# +# ns-B: +# eth1: 172.16.1.2/24, 2001:db8:1::2/64 +# lo2: 127.0.0.1/8, ::1/128 +# 172.16.2.2/32, 2001:db8:2::2/128 +# +# server / client nomenclature relative to ns-A + +VERBOSE=0 + +NSA_DEV=eth1 +NSB_DEV=eth1 +VRF=red +VRF_TABLE=1101 + +# IPv4 config +NSA_IP=172.16.1.1 +NSB_IP=172.16.1.2 +VRF_IP=172.16.3.1 + +# IPv6 config +NSA_IP6=2001:db8:1::1 +NSB_IP6=2001:db8:1::2 +VRF_IP6=2001:db8:3::1 + +NSA_LO_IP=172.16.2.1 +NSB_LO_IP=172.16.2.2 +NSA_LO_IP6=2001:db8:2::1 +NSB_LO_IP6=2001:db8:2::2 + +MCAST=ff02::1 +# set after namespace create +NSA_LINKIP6= +NSB_LINKIP6= + +NSA=ns-A +NSB=ns-B + +NSA_CMD="ip netns exec ${NSA}" +NSB_CMD="ip netns exec ${NSB}" + +which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) + +################################################################################ +# utilities + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + [ "${VERBOSE}" = "1" ] && echo + + if [ ${rc} -eq ${expected} ]; then + nsuccess=$((nsuccess+1)) + printf "TEST: %-70s [ OK ]\n" "${msg}" + else + nfail=$((nfail+1)) + printf "TEST: %-70s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi + + if [ "${PAUSE}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + + kill_procs +} + +log_test_addr() +{ + local addr=$1 + local rc=$2 + local expected=$3 + local msg="$4" + local astr + + astr=$(addr2str ${addr}) + log_test $rc $expected "$msg - ${astr}" +} + +log_section() +{ + echo + echo "###########################################################################" + echo "$*" + echo "###########################################################################" + echo +} + +log_subsection() +{ + echo + echo "#################################################################" + echo "$*" + echo +} + +log_start() +{ + # make sure we have no test instances running + kill_procs + + if [ "${VERBOSE}" = "1" ]; then + echo + echo "#######################################################" + fi +} + +log_debug() +{ + if [ "${VERBOSE}" = "1" ]; then + echo + echo "$*" + echo + fi +} + +show_hint() +{ + if [ "${VERBOSE}" = "1" ]; then + echo "HINT: $*" + echo + fi +} + +kill_procs() +{ + killall nettest ping ping6 >/dev/null 2>&1 + sleep 1 +} + +do_run_cmd() +{ + local cmd="$*" + local out + + if [ "$VERBOSE" = "1" ]; then + echo "COMMAND: ${cmd}" + fi + + out=$($cmd 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo "$out" + fi + + return $rc +} + +run_cmd() +{ + do_run_cmd ${NSA_CMD} $* +} + +run_cmd_nsb() +{ + do_run_cmd ${NSB_CMD} $* +} + +setup_cmd() +{ + local cmd="$*" + local rc + + run_cmd ${cmd} + rc=$? + if [ $rc -ne 0 ]; then + # show user the command if not done so already + if [ "$VERBOSE" = "0" ]; then + echo "setup command: $cmd" + fi + echo "failed. stopping tests" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue" + read a + fi + exit $rc + fi +} + +setup_cmd_nsb() +{ + local cmd="$*" + local rc + + run_cmd_nsb ${cmd} + rc=$? + if [ $rc -ne 0 ]; then + # show user the command if not done so already + if [ "$VERBOSE" = "0" ]; then + echo "setup command: $cmd" + fi + echo "failed. stopping tests" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue" + read a + fi + exit $rc + fi +} + +# set sysctl values in NS-A +set_sysctl() +{ + echo "SYSCTL: $*" + echo + run_cmd sysctl -q -w $* +} + +################################################################################ +# Setup for tests + +addr2str() +{ + case "$1" in + 127.0.0.1) echo "loopback";; + ::1) echo "IPv6 loopback";; + + ${NSA_IP}) echo "ns-A IP";; + ${NSA_IP6}) echo "ns-A IPv6";; + ${NSA_LO_IP}) echo "ns-A loopback IP";; + ${NSA_LO_IP6}) echo "ns-A loopback IPv6";; + ${NSA_LINKIP6}|${NSA_LINKIP6}%*) echo "ns-A IPv6 LLA";; + + ${NSB_IP}) echo "ns-B IP";; + ${NSB_IP6}) echo "ns-B IPv6";; + ${NSB_LO_IP}) echo "ns-B loopback IP";; + ${NSB_LO_IP6}) echo "ns-B loopback IPv6";; + ${NSB_LINKIP6}|${NSB_LINKIP6}%*) echo "ns-B IPv6 LLA";; + + ${VRF_IP}) echo "VRF IP";; + ${VRF_IP6}) echo "VRF IPv6";; + + ${MCAST}%*) echo "multicast IP";; + + *) echo "unknown";; + esac +} + +get_linklocal() +{ + local ns=$1 + local dev=$2 + local addr + + addr=$(ip -netns ${ns} -6 -br addr show dev ${dev} | \ + awk '{ + for (i = 3; i <= NF; ++i) { + if ($i ~ /^fe80/) + print $i + } + }' + ) + addr=${addr/\/*} + + [ -z "$addr" ] && return 1 + + echo $addr + + return 0 +} + +################################################################################ +# create namespaces and vrf + +create_vrf() +{ + local ns=$1 + local vrf=$2 + local table=$3 + local addr=$4 + local addr6=$5 + + ip -netns ${ns} link add ${vrf} type vrf table ${table} + ip -netns ${ns} link set ${vrf} up + ip -netns ${ns} route add vrf ${vrf} unreachable default metric 8192 + ip -netns ${ns} -6 route add vrf ${vrf} unreachable default metric 8192 + + ip -netns ${ns} addr add 127.0.0.1/8 dev ${vrf} + ip -netns ${ns} -6 addr add ::1 dev ${vrf} nodad + if [ "${addr}" != "-" ]; then + ip -netns ${ns} addr add dev ${vrf} ${addr} + fi + if [ "${addr6}" != "-" ]; then + ip -netns ${ns} -6 addr add dev ${vrf} ${addr6} + fi + + ip -netns ${ns} ru del pref 0 + ip -netns ${ns} ru add pref 32765 from all lookup local + ip -netns ${ns} -6 ru del pref 0 + ip -netns ${ns} -6 ru add pref 32765 from all lookup local +} + +create_ns() +{ + local ns=$1 + local addr=$2 + local addr6=$3 + + ip netns add ${ns} + + ip -netns ${ns} link set lo up + if [ "${addr}" != "-" ]; then + ip -netns ${ns} addr add dev lo ${addr} + fi + if [ "${addr6}" != "-" ]; then + ip -netns ${ns} -6 addr add dev lo ${addr6} + fi + + ip -netns ${ns} ro add unreachable default metric 8192 + ip -netns ${ns} -6 ro add unreachable default metric 8192 + + ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 +} + +# create veth pair to connect namespaces and apply addresses. +connect_ns() +{ + local ns1=$1 + local ns1_dev=$2 + local ns1_addr=$3 + local ns1_addr6=$4 + local ns2=$5 + local ns2_dev=$6 + local ns2_addr=$7 + local ns2_addr6=$8 + + ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp + ip -netns ${ns1} li set ${ns1_dev} up + ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev} + ip -netns ${ns2} li set ${ns2_dev} up + + if [ "${ns1_addr}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr} + fi + + if [ "${ns1_addr6}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6} + fi +} + +cleanup() +{ + # explicit cleanups to check those code paths + ip netns | grep -q ${NSA} + if [ $? -eq 0 ]; then + ip -netns ${NSA} link delete ${VRF} + ip -netns ${NSA} ro flush table ${VRF_TABLE} + + ip -netns ${NSA} addr flush dev ${NSA_DEV} + ip -netns ${NSA} -6 addr flush dev ${NSA_DEV} + ip -netns ${NSA} link set dev ${NSA_DEV} down + ip -netns ${NSA} link del dev ${NSA_DEV} + + ip netns del ${NSA} + fi + + ip netns del ${NSB} +} + +setup() +{ + local with_vrf=${1} + + # make sure we are starting with a clean slate + kill_procs + cleanup 2>/dev/null + + log_debug "Configuring network namespaces" + set -e + + create_ns ${NSA} ${NSA_LO_IP}/32 ${NSA_LO_IP6}/128 + create_ns ${NSB} ${NSB_LO_IP}/32 ${NSB_LO_IP6}/128 + connect_ns ${NSA} ${NSA_DEV} ${NSA_IP}/24 ${NSA_IP6}/64 \ + ${NSB} ${NSB_DEV} ${NSB_IP}/24 ${NSB_IP6}/64 + + NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV}) + NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV}) + + # tell ns-A how to get to remote addresses of ns-B + if [ "${with_vrf}" = "yes" ]; then + create_vrf ${NSA} ${VRF} ${VRF_TABLE} ${VRF_IP} ${VRF_IP6} + + ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF} + ip -netns ${NSA} ro add vrf ${VRF} ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV} + ip -netns ${NSA} -6 ro add vrf ${VRF} ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV} + + ip -netns ${NSB} ro add ${VRF_IP}/32 via ${NSA_IP} dev ${NSB_DEV} + ip -netns ${NSB} -6 ro add ${VRF_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV} + else + ip -netns ${NSA} ro add ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV} + ip -netns ${NSA} ro add ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV} + fi + + + # tell ns-B how to get to remote addresses of ns-A + ip -netns ${NSB} ro add ${NSA_LO_IP}/32 via ${NSA_IP} dev ${NSB_DEV} + ip -netns ${NSB} ro add ${NSA_LO_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV} + + set +e + + sleep 1 +} + +################################################################################ +# IPv4 + +ipv4_ping_novrf() +{ + local a + + # + # out + # + for a in ${NSB_IP} ${NSB_LO_IP} + do + log_start + run_cmd ping -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping out" + + log_start + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping out, device bind" + + log_start + run_cmd ping -c1 -w1 -I ${NSA_LO_IP} ${a} + log_test_addr ${a} $? 0 "ping out, address bind" + done + + # + # in + # + for a in ${NSA_IP} ${NSA_LO_IP} + do + log_start + run_cmd_nsb ping -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping in" + done + + # + # local traffic + # + for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1 + do + log_start + run_cmd ping -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping local" + done + + # + # local traffic, socket bound to device + # + # address on device + a=${NSA_IP} + log_start + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping local, device bind" + + # loopback addresses not reachable from device bind + # fails in a really weird way though because ipv4 special cases + # route lookups with oif set. + for a in ${NSA_LO_IP} 127.0.0.1 + do + log_start + show_hint "Fails since address on loopback device is out of device scope" + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 1 "ping local, device bind" + done + + # + # ip rule blocks reachability to remote address + # + log_start + setup_cmd ip rule add pref 32765 from all lookup local + setup_cmd ip rule del pref 0 from all lookup local + setup_cmd ip rule add pref 50 to ${NSB_LO_IP} prohibit + setup_cmd ip rule add pref 51 from ${NSB_IP} prohibit + + a=${NSB_LO_IP} + run_cmd ping -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, blocked by rule" + + # NOTE: ipv4 actually allows the lookup to fail and yet still create + # a viable rtable if the oif (e.g., bind to device) is set, so this + # case succeeds despite the rule + # run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + + a=${NSA_LO_IP} + log_start + show_hint "Response generates ICMP (or arp request is ignored) due to ip rule" + run_cmd_nsb ping -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in, blocked by rule" + + [ "$VERBOSE" = "1" ] && echo + setup_cmd ip rule del pref 32765 from all lookup local + setup_cmd ip rule add pref 0 from all lookup local + setup_cmd ip rule del pref 50 to ${NSB_LO_IP} prohibit + setup_cmd ip rule del pref 51 from ${NSB_IP} prohibit + + # + # route blocks reachability to remote address + # + log_start + setup_cmd ip route replace unreachable ${NSB_LO_IP} + setup_cmd ip route replace unreachable ${NSB_IP} + + a=${NSB_LO_IP} + run_cmd ping -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, blocked by route" + + # NOTE: ipv4 actually allows the lookup to fail and yet still create + # a viable rtable if the oif (e.g., bind to device) is set, so this + # case succeeds despite not having a route for the address + # run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + + a=${NSA_LO_IP} + log_start + show_hint "Response is dropped (or arp request is ignored) due to ip route" + run_cmd_nsb ping -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in, blocked by route" + + # + # remove 'remote' routes; fallback to default + # + log_start + setup_cmd ip ro del ${NSB_LO_IP} + + a=${NSB_LO_IP} + run_cmd ping -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, unreachable default route" + + # NOTE: ipv4 actually allows the lookup to fail and yet still create + # a viable rtable if the oif (e.g., bind to device) is set, so this + # case succeeds despite not having a route for the address + # run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} +} + +ipv4_ping_vrf() +{ + local a + + # should default on; does not exist on older kernels + set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null + + # + # out + # + for a in ${NSB_IP} ${NSB_LO_IP} + do + log_start + run_cmd ping -c1 -w1 -I ${VRF} ${a} + log_test_addr ${a} $? 0 "ping out, VRF bind" + + log_start + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping out, device bind" + + log_start + run_cmd ip vrf exec ${VRF} ping -c1 -w1 -I ${NSA_IP} ${a} + log_test_addr ${a} $? 0 "ping out, vrf device + dev address bind" + + log_start + run_cmd ip vrf exec ${VRF} ping -c1 -w1 -I ${VRF_IP} ${a} + log_test_addr ${a} $? 0 "ping out, vrf device + vrf address bind" + done + + # + # in + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd_nsb ping -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping in" + done + + # + # local traffic, local address + # + for a in ${NSA_IP} ${VRF_IP} 127.0.0.1 + do + log_start + show_hint "Source address should be ${a}" + run_cmd ping -c1 -w1 -I ${VRF} ${a} + log_test_addr ${a} $? 0 "ping local, VRF bind" + done + + # + # local traffic, socket bound to device + # + # address on device + a=${NSA_IP} + log_start + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping local, device bind" + + # vrf device is out of scope + for a in ${VRF_IP} 127.0.0.1 + do + log_start + show_hint "Fails since address on vrf device is out of device scope" + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 1 "ping local, device bind" + done + + # + # ip rule blocks address + # + log_start + setup_cmd ip rule add pref 50 to ${NSB_LO_IP} prohibit + setup_cmd ip rule add pref 51 from ${NSB_IP} prohibit + + a=${NSB_LO_IP} + run_cmd ping -c1 -w1 -I ${VRF} ${a} + log_test_addr ${a} $? 2 "ping out, vrf bind, blocked by rule" + + log_start + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule" + + a=${NSA_LO_IP} + log_start + show_hint "Response lost due to ip rule" + run_cmd_nsb ping -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in, blocked by rule" + + [ "$VERBOSE" = "1" ] && echo + setup_cmd ip rule del pref 50 to ${NSB_LO_IP} prohibit + setup_cmd ip rule del pref 51 from ${NSB_IP} prohibit + + # + # remove 'remote' routes; fallback to default + # + log_start + setup_cmd ip ro del vrf ${VRF} ${NSB_LO_IP} + + a=${NSB_LO_IP} + run_cmd ping -c1 -w1 -I ${VRF} ${a} + log_test_addr ${a} $? 2 "ping out, vrf bind, unreachable route" + + log_start + run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping out, device bind, unreachable route" + + a=${NSA_LO_IP} + log_start + show_hint "Response lost by unreachable route" + run_cmd_nsb ping -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in, unreachable route" +} + +ipv4_ping() +{ + log_section "IPv4 ping" + + log_subsection "No VRF" + setup + set_sysctl net.ipv4.raw_l3mdev_accept=0 2>/dev/null + ipv4_ping_novrf + setup + set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null + ipv4_ping_novrf + + log_subsection "With VRF" + setup "yes" + ipv4_ping_vrf +} + +################################################################################ +# IPv4 TCP + +ipv4_tcp_novrf() +{ + local a + + # + # server tests + # + for a in ${NSA_IP} ${NSA_LO_IP} + do + log_start + run_cmd nettest -s & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 0 "Global server" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s -d ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 0 "Device server" + + # verify TCP reset sent and received + for a in ${NSA_IP} ${NSA_LO_IP} + do + log_start + show_hint "Should fail 'Connection refused' since there is no server" + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # + # client + # + for a in ${NSB_IP} ${NSB_LO_IP} + do + log_start + run_cmd_nsb nettest -s & + sleep 1 + run_cmd nettest -r ${a} -0 ${NSA_IP} + log_test_addr ${a} $? 0 "Client" + + log_start + run_cmd_nsb nettest -s & + sleep 1 + run_cmd nettest -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 0 "Client, device bind" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -r ${a} + log_test_addr ${a} $? 1 "No server, unbound client" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "No server, device client" + done + + # + # local address tests + # + for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1 + do + log_start + run_cmd nettest -s & + sleep 1 + run_cmd nettest -r ${a} -0 ${a} -1 ${a} + log_test_addr ${a} $? 0 "Global server, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s -d ${NSA_DEV} & + sleep 1 + run_cmd nettest -r ${a} -0 ${a} + log_test_addr ${a} $? 0 "Device server, unbound client, local connection" + + for a in ${NSA_LO_IP} 127.0.0.1 + do + log_start + show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" + run_cmd nettest -s -d ${NSA_DEV} & + sleep 1 + run_cmd nettest -r ${a} + log_test_addr ${a} $? 1 "Device server, unbound client, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s & + sleep 1 + run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 0 "Global server, device client, local connection" + + for a in ${NSA_LO_IP} 127.0.0.1 + do + log_start + show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" + run_cmd nettest -s & + sleep 1 + run_cmd nettest -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "Global server, device client, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a} + log_test_addr ${a} $? 0 "Device server, device client, local connection" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 1 "No server, device client, local conn" +} + +ipv4_tcp_vrf() +{ + local a + + # disable global server + log_subsection "Global server disabled" + + set_sysctl net.ipv4.tcp_l3mdev_accept=0 + + # + # server tests + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + show_hint "Should fail 'Connection refused' since global server with VRF is disabled" + run_cmd nettest -s & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 1 "Global server" + + log_start + run_cmd nettest -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 0 "VRF server" + + log_start + run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 0 "Device server" + + # verify TCP reset received + log_start + show_hint "Should fail 'Connection refused' since there is no server" + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # local address tests + # (${VRF_IP} and 127.0.0.1 both timeout) + a=${NSA_IP} + log_start + show_hint "Should fail 'Connection refused' since global server with VRF is disabled" + run_cmd nettest -s & + sleep 1 + run_cmd nettest -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "Global server, local connection" + + # + # enable VRF global server + # + log_subsection "VRF Global server enabled" + set_sysctl net.ipv4.tcp_l3mdev_accept=1 + + for a in ${NSA_IP} ${VRF_IP} + do + log_start + show_hint "client socket should be bound to VRF" + run_cmd nettest -s -2 ${VRF} & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 0 "Global server" + + log_start + show_hint "client socket should be bound to VRF" + run_cmd nettest -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 0 "VRF server" + + # verify TCP reset received + log_start + show_hint "Should fail 'Connection refused'" + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + a=${NSA_IP} + log_start + show_hint "client socket should be bound to device" + run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 0 "Device server" + + # local address tests + for a in ${NSA_IP} ${VRF_IP} + do + log_start + show_hint "Should fail 'No route to host' since client is not bound to VRF" + run_cmd nettest -s -2 ${VRF} & + sleep 1 + run_cmd nettest -r ${a} + log_test_addr ${a} $? 1 "Global server, local connection" + done + + # + # client + # + for a in ${NSB_IP} ${NSB_LO_IP} + do + log_start + run_cmd_nsb nettest -s & + sleep 1 + run_cmd nettest -r ${a} -d ${VRF} + log_test_addr ${a} $? 0 "Client, VRF bind" + + log_start + run_cmd_nsb nettest -s & + sleep 1 + run_cmd nettest -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 0 "Client, device bind" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -r ${a} -d ${VRF} + log_test_addr ${a} $? 1 "No server, VRF client" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "No server, device client" + done + + for a in ${NSA_IP} ${VRF_IP} 127.0.0.1 + do + log_start + run_cmd nettest -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd nettest -r ${a} -d ${VRF} -0 ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} + log_test_addr ${a} $? 0 "VRF server, device client, local connection" + + log_start + show_hint "Should fail 'No route to host' since client is out of VRF scope" + run_cmd nettest -s -d ${VRF} & + sleep 1 + run_cmd nettest -r ${a} + log_test_addr ${a} $? 1 "VRF server, unbound client, local connection" + + log_start + run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -r ${a} -d ${VRF} -0 ${a} + log_test_addr ${a} $? 0 "Device server, VRF client, local connection" + + log_start + run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a} + log_test_addr ${a} $? 0 "Device server, device client, local connection" +} + +ipv4_tcp() +{ + log_section "IPv4/TCP" + log_subsection "No VRF" + setup + + # tcp_l3mdev_accept should have no affect without VRF; + # run tests with it enabled and disabled to verify + log_subsection "tcp_l3mdev_accept disabled" + set_sysctl net.ipv4.tcp_l3mdev_accept=0 + ipv4_tcp_novrf + log_subsection "tcp_l3mdev_accept enabled" + set_sysctl net.ipv4.tcp_l3mdev_accept=1 + ipv4_tcp_novrf + + log_subsection "With VRF" + setup "yes" + ipv4_tcp_vrf +} + +################################################################################ +# IPv4 UDP + +ipv4_udp_novrf() +{ + local a + + # + # server tests + # + for a in ${NSA_IP} ${NSA_LO_IP} + do + log_start + run_cmd nettest -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 0 "Global server" + + log_start + show_hint "Should fail 'Connection refused' since there is no server" + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + a=${NSA_IP} + log_start + run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 0 "Device server" + + # + # client + # + for a in ${NSB_IP} ${NSB_LO_IP} + do + log_start + run_cmd_nsb nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -0 ${NSA_IP} + log_test_addr ${a} $? 0 "Client" + + log_start + run_cmd_nsb nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP} + log_test_addr ${a} $? 0 "Client, device bind" + + log_start + run_cmd_nsb nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP} + log_test_addr ${a} $? 0 "Client, device send via cmsg" + + log_start + run_cmd_nsb nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP} + log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -D -r ${a} + log_test_addr ${a} $? 1 "No server, unbound client" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -D -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "No server, device client" + done + + # + # local address tests + # + for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1 + do + log_start + run_cmd nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -0 ${a} -1 ${a} + log_test_addr ${a} $? 0 "Global server, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -r ${a} + log_test_addr ${a} $? 0 "Device server, unbound client, local connection" + + for a in ${NSA_LO_IP} 127.0.0.1 + do + log_start + show_hint "Should fail 'Connection refused' since address is out of device scope" + run_cmd nettest -s -D -d ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -r ${a} + log_test_addr ${a} $? 1 "Device server, unbound client, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s -D & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Global server, device client, local connection" + + log_start + run_cmd nettest -s -D & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -C -r ${a} + log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection" + + log_start + run_cmd nettest -s -D & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -S -r ${a} + log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection" + + # IPv4 with device bind has really weird behavior - it overrides the + # fib lookup, generates an rtable and tries to send the packet. This + # causes failures for local traffic at different places + for a in ${NSA_LO_IP} 127.0.0.1 + do + log_start + show_hint "Should fail since addresses on loopback are out of device scope" + run_cmd nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 2 "Global server, device client, local connection" + + log_start + show_hint "Should fail since addresses on loopback are out of device scope" + run_cmd nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C + log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection" + + log_start + show_hint "Should fail since addresses on loopback are out of device scope" + run_cmd nettest -D -s & + sleep 1 + run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S + log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -D -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a} + log_test_addr ${a} $? 0 "Device server, device client, local conn" + + log_start + run_cmd nettest -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 2 "No server, device client, local conn" +} + +ipv4_udp_vrf() +{ + local a + + # disable global server + log_subsection "Global server disabled" + set_sysctl net.ipv4.udp_l3mdev_accept=0 + + # + # server tests + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + show_hint "Fails because ingress is in a VRF and global server is disabled" + run_cmd nettest -D -s & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 1 "Global server" + + log_start + run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 0 "VRF server" + + log_start + run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server" + + log_start + show_hint "Should fail 'Connection refused' since there is no server" + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 1 "No server" + + log_start + show_hint "Should fail 'Connection refused' since global server is out of scope" + run_cmd nettest -D -s & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 1 "Global server, VRF client, local connection" + done + + a=${NSA_IP} + log_start + run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" + + log_start + run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection" + + a=${NSA_IP} + log_start + run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" + + log_start + run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" + + # enable global server + log_subsection "Global server enabled" + set_sysctl net.ipv4.udp_l3mdev_accept=1 + + # + # server tests + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 0 "Global server" + + log_start + run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 0 "VRF server" + + log_start + run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd_nsb nettest -D -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # + # client tests + # + log_start + run_cmd_nsb nettest -D -s & + sleep 1 + run_cmd nettest -d ${VRF} -D -r ${NSB_IP} -1 ${NSA_IP} + log_test $? 0 "VRF client" + + log_start + run_cmd_nsb nettest -D -s & + sleep 1 + run_cmd nettest -d ${NSA_DEV} -D -r ${NSB_IP} -1 ${NSA_IP} + log_test $? 0 "Enslaved device client" + + # negative test - should fail + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -D -d ${VRF} -r ${NSB_IP} + log_test $? 1 "No server, VRF client" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -D -d ${NSA_DEV} -r ${NSB_IP} + log_test $? 1 "No server, enslaved device client" + + # + # local address tests + # + a=${NSA_IP} + log_start + run_cmd nettest -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Global server, VRF client, local conn" + + log_start + run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" + + log_start + run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "VRF server, device client, local conn" + + log_start + run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" + + log_start + run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" + + for a in ${VRF_IP} 127.0.0.1 + do + log_start + run_cmd nettest -D -s -2 ${VRF} & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Global server, VRF client, local conn" + done + + for a in ${VRF_IP} 127.0.0.1 + do + log_start + run_cmd nettest -s -D -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" + done + + # negative test - should fail + # verifies ECONNREFUSED + for a in ${NSA_IP} ${VRF_IP} 127.0.0.1 + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 1 "No server, VRF client, local conn" + done +} + +ipv4_udp() +{ + log_section "IPv4/UDP" + log_subsection "No VRF" + + setup + + # udp_l3mdev_accept should have no affect without VRF; + # run tests with it enabled and disabled to verify + log_subsection "udp_l3mdev_accept disabled" + set_sysctl net.ipv4.udp_l3mdev_accept=0 + ipv4_udp_novrf + log_subsection "udp_l3mdev_accept enabled" + set_sysctl net.ipv4.udp_l3mdev_accept=1 + ipv4_udp_novrf + + log_subsection "With VRF" + setup "yes" + ipv4_udp_vrf +} + +################################################################################ +# IPv4 address bind +# +# verifies ability or inability to bind to an address / device + +ipv4_addr_bind_novrf() +{ + # + # raw socket + # + for a in ${NSA_IP} ${NSA_LO_IP} + do + log_start + run_cmd nettest -s -R -P icmp -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address" + + log_start + run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" + done + + # + # tcp sockets + # + a=${NSA_IP} + log_start + run_cmd nettest -l ${a} -r ${NSB_IP} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address" + + log_start + run_cmd nettest -l ${a} -r ${NSB_IP} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind" + + # Sadly, the kernel allows binding a socket to a device and then + # binding to an address not on the device. The only restriction + # is that the address is valid in the L3 domain. So this test + # passes when it really should not + #a=${NSA_LO_IP} + #log_start + #show_hint "Should fail with 'Cannot assign requested address'" + #run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b + #log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address" +} + +ipv4_addr_bind_vrf() +{ + # + # raw socket + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest -s -R -P icmp -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address" + + log_start + run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" + log_start + run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address after VRF bind" + done + + a=${NSA_LO_IP} + log_start + show_hint "Address on loopback is out of VRF scope" + run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b + log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" + + # + # tcp sockets + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address" + + log_start + run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind" + done + + a=${NSA_LO_IP} + log_start + show_hint "Address on loopback out of scope for VRF" + run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b + log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF" + + log_start + show_hint "Address on loopback out of scope for device in VRF" + run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind" +} + +ipv4_addr_bind() +{ + log_section "IPv4 address binds" + + log_subsection "No VRF" + setup + ipv4_addr_bind_novrf + + log_subsection "With VRF" + setup "yes" + ipv4_addr_bind_vrf +} + +################################################################################ +# IPv4 runtime tests + +ipv4_rt() +{ + local desc="$1" + local varg="$2" + local with_vrf="yes" + local a + + # + # server tests + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest ${varg} -s & + sleep 1 + run_cmd_nsb nettest ${varg} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, global server" + + setup ${with_vrf} + done + + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest ${varg} -s -d ${VRF} & + sleep 1 + run_cmd_nsb nettest ${varg} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, VRF server" + + setup ${with_vrf} + done + + a=${NSA_IP} + log_start + run_cmd nettest ${varg} -s -d ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest ${varg} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, enslaved device server" + + setup ${with_vrf} + + # + # client test + # + log_start + run_cmd_nsb nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, VRF client" + + setup ${with_vrf} + + log_start + run_cmd_nsb nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, enslaved device client" + + setup ${with_vrf} + + # + # local address tests + # + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${VRF} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, global server, VRF client, local" + + setup ${with_vrf} + done + + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest ${varg} -d ${VRF} -s & + sleep 1 + run_cmd nettest ${varg} -d ${VRF} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, VRF server and client, local" + + setup ${with_vrf} + done + + a=${NSA_IP} + log_start + run_cmd nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, global server, enslaved device client, local" + + setup ${with_vrf} + + log_start + run_cmd nettest ${varg} -d ${VRF} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, VRF server, enslaved device client, local" + + setup ${with_vrf} + + log_start + run_cmd nettest ${varg} -d ${NSA_DEV} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, enslaved device server and client, local" +} + +ipv4_ping_rt() +{ + local with_vrf="yes" + local a + + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd_nsb ping -f ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "Device delete with active traffic - ping in" + + setup ${with_vrf} + done + + a=${NSB_IP} + log_start + run_cmd ping -f -I ${VRF} ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "Device delete with active traffic - ping out" +} + +ipv4_runtime() +{ + log_section "Run time tests - ipv4" + + setup "yes" + ipv4_ping_rt + + setup "yes" + ipv4_rt "TCP active socket" "-n -1" + + setup "yes" + ipv4_rt "TCP passive socket" "-i" +} + +################################################################################ +# IPv6 + +ipv6_ping_novrf() +{ + local a + + # should not have an impact, but make a known state + set_sysctl net.ipv4.raw_l3mdev_accept=0 2>/dev/null + + # + # out + # + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV} + do + log_start + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping out" + done + + for a in ${NSB_IP6} ${NSB_LO_IP6} + do + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping out, device bind" + + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_LO_IP6} ${a} + log_test_addr ${a} $? 0 "ping out, loopback address bind" + done + + # + # in + # + for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV} ${MCAST}%${NSB_DEV} + do + log_start + run_cmd_nsb ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping in" + done + + # + # local traffic, local address + # + for a in ${NSA_IP6} ${NSA_LO_IP6} ::1 ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV} + do + log_start + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping local, no bind" + done + + for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV} + do + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping local, device bind" + done + + for a in ${NSA_LO_IP6} ::1 + do + log_start + show_hint "Fails since address on loopback is out of device scope" + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping local, device bind" + done + + # + # ip rule blocks address + # + log_start + setup_cmd ip -6 rule add pref 32765 from all lookup local + setup_cmd ip -6 rule del pref 0 from all lookup local + setup_cmd ip -6 rule add pref 50 to ${NSB_LO_IP6} prohibit + setup_cmd ip -6 rule add pref 51 from ${NSB_IP6} prohibit + + a=${NSB_LO_IP6} + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, blocked by rule" + + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule" + + a=${NSA_LO_IP6} + log_start + show_hint "Response lost due to ip rule" + run_cmd_nsb ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in, blocked by rule" + + setup_cmd ip -6 rule add pref 0 from all lookup local + setup_cmd ip -6 rule del pref 32765 from all lookup local + setup_cmd ip -6 rule del pref 50 to ${NSB_LO_IP6} prohibit + setup_cmd ip -6 rule del pref 51 from ${NSB_IP6} prohibit + + # + # route blocks reachability to remote address + # + log_start + setup_cmd ip -6 route del ${NSB_LO_IP6} + setup_cmd ip -6 route add unreachable ${NSB_LO_IP6} metric 10 + setup_cmd ip -6 route add unreachable ${NSB_IP6} metric 10 + + a=${NSB_LO_IP6} + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, blocked by route" + + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping out, device bind, blocked by route" + + a=${NSA_LO_IP6} + log_start + show_hint "Response lost due to ip route" + run_cmd_nsb ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in, blocked by route" + + + # + # remove 'remote' routes; fallback to default + # + log_start + setup_cmd ip -6 ro del unreachable ${NSB_LO_IP6} + setup_cmd ip -6 ro del unreachable ${NSB_IP6} + + a=${NSB_LO_IP6} + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, unreachable route" + + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping out, device bind, unreachable route" +} + +ipv6_ping_vrf() +{ + local a + + # should default on; does not exist on older kernels + set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null + + # + # out + # + for a in ${NSB_IP6} ${NSB_LO_IP6} + do + log_start + run_cmd ${ping6} -c1 -w1 -I ${VRF} ${a} + log_test_addr ${a} $? 0 "ping out, VRF bind" + done + + for a in ${NSB_LINKIP6}%${VRF} ${MCAST}%${VRF} + do + log_start + show_hint "Fails since VRF device does not support linklocal or multicast" + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, VRF bind" + done + + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV} + do + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping out, device bind" + done + + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} + do + log_start + run_cmd ip vrf exec ${VRF} ${ping6} -c1 -w1 -I ${VRF_IP6} ${a} + log_test_addr ${a} $? 0 "ping out, vrf device+address bind" + done + + # + # in + # + for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} ${MCAST}%${NSB_DEV} + do + log_start + run_cmd_nsb ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 0 "ping in" + done + + a=${NSA_LO_IP6} + log_start + show_hint "Fails since loopback address is out of VRF scope" + run_cmd_nsb ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in" + + # + # local traffic, local address + # + for a in ${NSA_IP6} ${VRF_IP6} ::1 + do + log_start + show_hint "Source address should be ${a}" + run_cmd ${ping6} -c1 -w1 -I ${VRF} ${a} + log_test_addr ${a} $? 0 "ping local, VRF bind" + done + + for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV} + do + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 0 "ping local, device bind" + done + + # LLA to GUA - remove ipv6 global addresses from ns-B + setup_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV} + setup_cmd_nsb ip -6 addr del ${NSB_LO_IP6}/128 dev lo + setup_cmd_nsb ip -6 ro add ${NSA_IP6}/128 via ${NSA_LINKIP6} dev ${NSB_DEV} + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6} + log_test_addr ${a} $? 0 "ping in, LLA to GUA" + done + + setup_cmd_nsb ip -6 ro del ${NSA_IP6}/128 via ${NSA_LINKIP6} dev ${NSB_DEV} + setup_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV} + setup_cmd_nsb ip -6 addr add ${NSB_LO_IP6}/128 dev lo + + # + # ip rule blocks address + # + log_start + setup_cmd ip -6 rule add pref 50 to ${NSB_LO_IP6} prohibit + setup_cmd ip -6 rule add pref 51 from ${NSB_IP6} prohibit + + a=${NSB_LO_IP6} + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, blocked by rule" + + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule" + + a=${NSA_LO_IP6} + log_start + show_hint "Response lost due to ip rule" + run_cmd_nsb ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 1 "ping in, blocked by rule" + + log_start + setup_cmd ip -6 rule del pref 50 to ${NSB_LO_IP6} prohibit + setup_cmd ip -6 rule del pref 51 from ${NSB_IP6} prohibit + + # + # remove 'remote' routes; fallback to default + # + log_start + setup_cmd ip -6 ro del ${NSB_LO_IP6} vrf ${VRF} + + a=${NSB_LO_IP6} + run_cmd ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping out, unreachable route" + + log_start + run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a} + log_test_addr ${a} $? 2 "ping out, device bind, unreachable route" + + ip -netns ${NSB} -6 ro del ${NSA_LO_IP6} + a=${NSA_LO_IP6} + log_start + run_cmd_nsb ${ping6} -c1 -w1 ${a} + log_test_addr ${a} $? 2 "ping in, unreachable route" +} + +ipv6_ping() +{ + log_section "IPv6 ping" + + log_subsection "No VRF" + setup + ipv6_ping_novrf + + log_subsection "With VRF" + setup "yes" + ipv6_ping_vrf +} + +################################################################################ +# IPv6 TCP + +ipv6_tcp_novrf() +{ + local a + + # + # server tests + # + for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + run_cmd nettest -6 -s & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "Global server" + done + + # verify TCP reset received + for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # + # client + # + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} + do + log_start + run_cmd_nsb nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} + log_test_addr ${a} $? 0 "Client" + done + + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} + do + log_start + run_cmd_nsb nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 0 "Client, device bind" + done + + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "No server, device client" + done + + # + # local address tests + # + for a in ${NSA_IP6} ${NSA_LO_IP6} ::1 + do + log_start + run_cmd nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} + log_test_addr ${a} $? 0 "Global server, local connection" + done + + a=${NSA_IP6} + log_start + run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -r ${a} -0 ${a} + log_test_addr ${a} $? 0 "Device server, unbound client, local connection" + + for a in ${NSA_LO_IP6} ::1 + do + log_start + show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" + run_cmd nettest -6 -s -d ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -r ${a} + log_test_addr ${a} $? 1 "Device server, unbound client, local connection" + done + + a=${NSA_IP6} + log_start + run_cmd nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} + log_test_addr ${a} $? 0 "Global server, device client, local connection" + + for a in ${NSA_LO_IP6} ::1 + do + log_start + show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope" + run_cmd nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "Global server, device client, local connection" + done + + for a in ${NSA_IP6} ${NSA_LINKIP6} + do + log_start + run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Device server, device client, local conn" + done + + for a in ${NSA_IP6} ${NSA_LINKIP6} + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -6 -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 1 "No server, device client, local conn" + done +} + +ipv6_tcp_vrf() +{ + local a + + # disable global server + log_subsection "Global server disabled" + + set_sysctl net.ipv4.tcp_l3mdev_accept=0 + + # + # server tests + # + for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + show_hint "Should fail 'Connection refused' since global server with VRF is disabled" + run_cmd nettest -6 -s & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 1 "Global server" + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "VRF server" + done + + # link local is always bound to ingress device + a=${NSA_LINKIP6}%${NSB_DEV} + log_start + run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "VRF server" + + for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "Device server" + done + + # verify TCP reset received + for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # local address tests + a=${NSA_IP6} + log_start + show_hint "Should fail 'Connection refused' since global server with VRF is disabled" + run_cmd nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "Global server, local connection" + + # + # enable VRF global server + # + log_subsection "VRF Global server enabled" + set_sysctl net.ipv4.tcp_l3mdev_accept=1 + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -s -2 ${VRF} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "Global server" + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "VRF server" + done + + # For LLA, child socket is bound to device + a=${NSA_LINKIP6}%${NSB_DEV} + log_start + run_cmd nettest -6 -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "Global server" + + log_start + run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "VRF server" + + for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 0 "Device server" + done + + # verify TCP reset received + for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # local address tests + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + show_hint "Fails 'No route to host' since client is not in VRF" + run_cmd nettest -6 -s -2 ${VRF} & + sleep 1 + run_cmd nettest -6 -r ${a} + log_test_addr ${a} $? 1 "Global server, local connection" + done + + + # + # client + # + for a in ${NSB_IP6} ${NSB_LO_IP6} + do + log_start + run_cmd_nsb nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${VRF} + log_test_addr ${a} $? 0 "Client, VRF bind" + done + + a=${NSB_LINKIP6} + log_start + show_hint "Fails since VRF device does not allow linklocal addresses" + run_cmd_nsb nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${VRF} + log_test_addr ${a} $? 1 "Client, VRF bind" + + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6} + do + log_start + run_cmd_nsb nettest -6 -s & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 0 "Client, device bind" + done + + for a in ${NSB_IP6} ${NSB_LO_IP6} + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -6 -r ${a} -d ${VRF} + log_test_addr ${a} $? 1 "No server, VRF client" + done + + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6} + do + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "No server, device client" + done + + for a in ${NSA_IP6} ${VRF_IP6} ::1 + do + log_start + run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local connection" + done + + a=${NSA_IP6} + log_start + run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} + log_test_addr ${a} $? 0 "VRF server, device client, local connection" + + a=${NSA_IP6} + log_start + show_hint "Should fail since unbound client is out of VRF scope" + run_cmd nettest -6 -s -d ${VRF} & + sleep 1 + run_cmd nettest -6 -r ${a} + log_test_addr ${a} $? 1 "VRF server, unbound client, local connection" + + log_start + run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a} + log_test_addr ${a} $? 0 "Device server, VRF client, local connection" + + for a in ${NSA_IP6} ${NSA_LINKIP6} + do + log_start + run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a} + log_test_addr ${a} $? 0 "Device server, device client, local connection" + done +} + +ipv6_tcp() +{ + log_section "IPv6/TCP" + log_subsection "No VRF" + setup + + # tcp_l3mdev_accept should have no affect without VRF; + # run tests with it enabled and disabled to verify + log_subsection "tcp_l3mdev_accept disabled" + set_sysctl net.ipv4.tcp_l3mdev_accept=0 + ipv6_tcp_novrf + log_subsection "tcp_l3mdev_accept enabled" + set_sysctl net.ipv4.tcp_l3mdev_accept=1 + ipv6_tcp_novrf + + log_subsection "With VRF" + setup "yes" + ipv6_tcp_vrf +} + +################################################################################ +# IPv6 UDP + +ipv6_udp_novrf() +{ + local a + + # + # server tests + # + for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "Global server" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "Device server" + done + + a=${NSA_LO_IP6} + log_start + run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "Global server" + + # should fail since loopback address is out of scope for a device + # bound server, but it does not - hence this is more documenting + # behavior. + #log_start + #show_hint "Should fail since loopback address is out of scope" + #run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + #sleep 1 + #run_cmd_nsb nettest -6 -D -r ${a} + #log_test_addr ${a} $? 1 "Device server" + + # negative test - should fail + for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV} + do + log_start + show_hint "Should fail 'Connection refused' since there is no server" + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # + # client + # + for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} + do + log_start + run_cmd_nsb nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -0 ${NSA_IP6} + log_test_addr ${a} $? 0 "Client" + + log_start + run_cmd_nsb nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP6} + log_test_addr ${a} $? 0 "Client, device bind" + + log_start + run_cmd_nsb nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP6} + log_test_addr ${a} $? 0 "Client, device send via cmsg" + + log_start + run_cmd_nsb nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP6} + log_test_addr ${a} $? 0 "Client, device bind via IPV6_UNICAST_IF" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -6 -D -r ${a} + log_test_addr ${a} $? 1 "No server, unbound client" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "No server, device client" + done + + # + # local address tests + # + for a in ${NSA_IP6} ${NSA_LO_IP6} ::1 + do + log_start + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -0 ${a} -1 ${a} + log_test_addr ${a} $? 0 "Global server, local connection" + done + + a=${NSA_IP6} + log_start + run_cmd nettest -6 -s -D -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "Device server, unbound client, local connection" + + for a in ${NSA_LO_IP6} ::1 + do + log_start + show_hint "Should fail 'Connection refused' since address is out of device scope" + run_cmd nettest -6 -s -D -d ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -r ${a} + log_test_addr ${a} $? 1 "Device server, local connection" + done + + a=${NSA_IP6} + log_start + run_cmd nettest -6 -s -D & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Global server, device client, local connection" + + log_start + run_cmd nettest -6 -s -D & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -C -r ${a} + log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection" + + log_start + run_cmd nettest -6 -s -D & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -S -r ${a} + log_test_addr ${a} $? 0 "Global server, device client via IPV6_UNICAST_IF, local connection" + + for a in ${NSA_LO_IP6} ::1 + do + log_start + show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} + log_test_addr ${a} $? 1 "Global server, device client, local connection" + + log_start + show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C + log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection" + + log_start + show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope" + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S + log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection" + done + + a=${NSA_IP6} + log_start + run_cmd nettest -6 -D -s -d ${NSA_DEV} -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a} + log_test_addr ${a} $? 0 "Device server, device client, local conn" + + log_start + show_hint "Should fail 'Connection refused'" + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 1 "No server, device client, local conn" + + # LLA to GUA + run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV} + run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV} + log_start + run_cmd nettest -6 -s -D & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${NSA_IP6} + log_test $? 0 "UDP in - LLA to GUA" + + run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV} + run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV} nodad +} + +ipv6_udp_vrf() +{ + local a + + # disable global server + log_subsection "Global server disabled" + set_sysctl net.ipv4.udp_l3mdev_accept=0 + + # + # server tests + # + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + show_hint "Should fail 'Connection refused' since global server is disabled" + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 1 "Global server" + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "VRF server" + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server" + done + + # negative test - should fail + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + show_hint "Should fail 'Connection refused' since there is no server" + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # + # local address tests + # + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + show_hint "Should fail 'Connection refused' since global server is disabled" + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 1 "Global server, VRF client, local conn" + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -D -d ${VRF} -s & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" + done + + a=${NSA_IP6} + log_start + show_hint "Should fail 'Connection refused' since global server is disabled" + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 1 "Global server, device client, local conn" + + log_start + run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "VRF server, device client, local conn" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn" + + # disable global server + log_subsection "Global server enabled" + set_sysctl net.ipv4.udp_l3mdev_accept=1 + + # + # server tests + # + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "Global server" + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "VRF server" + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 0 "Enslaved device server" + done + + # negative test - should fail + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd_nsb nettest -6 -D -r ${a} + log_test_addr ${a} $? 1 "No server" + done + + # + # client tests + # + log_start + run_cmd_nsb nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6} + log_test $? 0 "VRF client" + + # negative test - should fail + log_start + run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6} + log_test $? 1 "No server, VRF client" + + log_start + run_cmd_nsb nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6} + log_test $? 0 "Enslaved device client" + + # negative test - should fail + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6} + log_test $? 1 "No server, enslaved device client" + + # + # local address tests + # + a=${NSA_IP6} + log_start + run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Global server, VRF client, local conn" + + #log_start + run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" + + + a=${VRF_IP6} + log_start + run_cmd nettest -6 -D -s -2 ${VRF} & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Global server, VRF client, local conn" + + log_start + run_cmd nettest -6 -D -d ${VRF} -s -2 ${VRF} & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "VRF server, VRF client, local conn" + + # negative test - should fail + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 1 "No server, VRF client, local conn" + done + + # device to global IP + a=${NSA_IP6} + log_start + run_cmd nettest -6 -D -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Global server, device client, local conn" + + log_start + run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "VRF server, device client, local conn" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${VRF} -r ${a} + log_test_addr ${a} $? 0 "Device server, VRF client, local conn" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 0 "Device server, device client, local conn" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} + log_test_addr ${a} $? 1 "No server, device client, local conn" + + + # link local addresses + log_start + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6} + log_test $? 0 "Global server, linklocal IP" + + log_start + run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6} + log_test $? 1 "No server, linklocal IP" + + + log_start + run_cmd_nsb nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6} + log_test $? 0 "Enslaved device client, linklocal IP" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6} + log_test $? 1 "No server, device client, peer linklocal IP" + + + log_start + run_cmd nettest -6 -D -s & + sleep 1 + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6} + log_test $? 0 "Enslaved device client, local conn - linklocal IP" + + log_start + run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6} + log_test $? 1 "No server, device client, local conn - linklocal IP" + + # LLA to GUA + run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV} + run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV} + log_start + run_cmd nettest -6 -s -D & + sleep 1 + run_cmd_nsb nettest -6 -D -r ${NSA_IP6} + log_test $? 0 "UDP in - LLA to GUA" + + run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV} + run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV} nodad +} + +ipv6_udp() +{ + # should not matter, but set to known state + set_sysctl net.ipv4.udp_early_demux=1 + + log_section "IPv6/UDP" + log_subsection "No VRF" + setup + + # udp_l3mdev_accept should have no affect without VRF; + # run tests with it enabled and disabled to verify + log_subsection "udp_l3mdev_accept disabled" + set_sysctl net.ipv4.udp_l3mdev_accept=0 + ipv6_udp_novrf + log_subsection "udp_l3mdev_accept enabled" + set_sysctl net.ipv4.udp_l3mdev_accept=1 + ipv6_udp_novrf + + log_subsection "With VRF" + setup "yes" + ipv6_udp_vrf +} + +################################################################################ +# IPv6 address bind + +ipv6_addr_bind_novrf() +{ + # + # raw socket + # + for a in ${NSA_IP6} ${NSA_LO_IP6} + do + log_start + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address" + + log_start + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" + done + + # + # tcp sockets + # + a=${NSA_IP6} + log_start + run_cmd nettest -6 -s -l ${a} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address" + + log_start + run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind" + + a=${NSA_LO_IP6} + log_start + show_hint "Should fail with 'Cannot assign requested address'" + run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address" +} + +ipv6_addr_bind_vrf() +{ + # + # raw socket + # + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address after vrf bind" + + log_start + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b + log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind" + done + + a=${NSA_LO_IP6} + log_start + show_hint "Address on loopback is out of VRF scope" + run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b + log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind" + + # + # tcp sockets + # + # address on enslaved device is valid for the VRF or device in a VRF + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address with VRF bind" + done + + a=${NSA_IP6} + log_start + run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind" + + a=${VRF_IP6} + log_start + run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 1 "TCP socket bind to VRF address with device bind" + + a=${NSA_LO_IP6} + log_start + show_hint "Address on loopback out of scope for VRF" + run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b + log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF" + + log_start + show_hint "Address on loopback out of scope for device in VRF" + run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b + log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind" + +} + +ipv6_addr_bind() +{ + log_section "IPv6 address binds" + + log_subsection "No VRF" + setup + ipv6_addr_bind_novrf + + log_subsection "With VRF" + setup "yes" + ipv6_addr_bind_vrf +} + +################################################################################ +# IPv6 runtime tests + +ipv6_rt() +{ + local desc="$1" + local varg="-6 $2" + local with_vrf="yes" + local a + + # + # server tests + # + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest ${varg} -s & + sleep 1 + run_cmd_nsb nettest ${varg} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, global server" + + setup ${with_vrf} + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest ${varg} -d ${VRF} -s & + sleep 1 + run_cmd_nsb nettest ${varg} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, VRF server" + + setup ${with_vrf} + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest ${varg} -d ${NSA_DEV} -s & + sleep 1 + run_cmd_nsb nettest ${varg} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, enslaved device server" + + setup ${with_vrf} + done + + # + # client test + # + log_start + run_cmd_nsb nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP6} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test 0 0 "${desc}, VRF client" + + setup ${with_vrf} + + log_start + run_cmd_nsb nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP6} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test 0 0 "${desc}, enslaved device client" + + setup ${with_vrf} + + + # + # local address tests + # + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${VRF} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, global server, VRF client" + + setup ${with_vrf} + done + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest ${varg} -d ${VRF} -s & + sleep 1 + run_cmd nettest ${varg} -d ${VRF} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, VRF server and client" + + setup ${with_vrf} + done + + a=${NSA_IP6} + log_start + run_cmd nettest ${varg} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, global server, device client" + + setup ${with_vrf} + + log_start + run_cmd nettest ${varg} -d ${VRF} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, VRF server, device client" + + setup ${with_vrf} + + log_start + run_cmd nettest ${varg} -d ${NSA_DEV} -s & + sleep 1 + run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "${desc}, device server, device client" +} + +ipv6_ping_rt() +{ + local with_vrf="yes" + local a + + a=${NSA_IP6} + log_start + run_cmd_nsb ${ping6} -f ${a} & + sleep 3 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "Device delete with active traffic - ping in" + + setup ${with_vrf} + + log_start + run_cmd ${ping6} -f ${NSB_IP6} -I ${VRF} & + sleep 1 + run_cmd ip link del ${VRF} + sleep 1 + log_test_addr ${a} 0 0 "Device delete with active traffic - ping out" +} + +ipv6_runtime() +{ + log_section "Run time tests - ipv6" + + setup "yes" + ipv6_ping_rt + + setup "yes" + ipv6_rt "TCP active socket" "-n -1" + + setup "yes" + ipv6_rt "TCP passive socket" "-i" + + setup "yes" + ipv6_rt "UDP active socket" "-D -n -1" +} + +################################################################################ +# netfilter blocking connections + +netfilter_tcp_reset() +{ + local a + + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest -s & + sleep 1 + run_cmd_nsb nettest -r ${a} + log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx" + done +} + +netfilter_icmp() +{ + local stype="$1" + local arg + local a + + [ "${stype}" = "UDP" ] && arg="-D" + + for a in ${NSA_IP} ${VRF_IP} + do + log_start + run_cmd nettest ${arg} -s & + sleep 1 + run_cmd_nsb nettest ${arg} -r ${a} + log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach" + done +} + +ipv4_netfilter() +{ + log_section "IPv4 Netfilter" + log_subsection "TCP reset" + + setup "yes" + run_cmd iptables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with tcp-reset + + netfilter_tcp_reset + + log_start + log_subsection "ICMP unreachable" + + log_start + run_cmd iptables -F + run_cmd iptables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with icmp-port-unreachable + run_cmd iptables -A INPUT -p udp --dport 12345 -j REJECT --reject-with icmp-port-unreachable + + netfilter_icmp "TCP" + netfilter_icmp "UDP" + + log_start + iptables -F +} + +netfilter_tcp6_reset() +{ + local a + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -s & + sleep 1 + run_cmd_nsb nettest -6 -r ${a} + log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx" + done +} + +netfilter_icmp6() +{ + local stype="$1" + local arg + local a + + [ "${stype}" = "UDP" ] && arg="$arg -D" + + for a in ${NSA_IP6} ${VRF_IP6} + do + log_start + run_cmd nettest -6 -s ${arg} & + sleep 1 + run_cmd_nsb nettest -6 ${arg} -r ${a} + log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach" + done +} + +ipv6_netfilter() +{ + log_section "IPv6 Netfilter" + log_subsection "TCP reset" + + setup "yes" + run_cmd ip6tables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with tcp-reset + + netfilter_tcp6_reset + + log_subsection "ICMP unreachable" + + log_start + run_cmd ip6tables -F + run_cmd ip6tables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with icmp6-port-unreachable + run_cmd ip6tables -A INPUT -p udp --dport 12345 -j REJECT --reject-with icmp6-port-unreachable + + netfilter_icmp6 "TCP" + netfilter_icmp6 "UDP" + + log_start + ip6tables -F +} + +################################################################################ +# specific use cases + +# VRF only. +# ns-A device enslaved to bridge. Verify traffic with and without +# br_netfilter module loaded. Repeat with SVI on bridge. +use_case_br() +{ + setup "yes" + + setup_cmd ip link set ${NSA_DEV} down + setup_cmd ip addr del dev ${NSA_DEV} ${NSA_IP}/24 + setup_cmd ip -6 addr del dev ${NSA_DEV} ${NSA_IP6}/64 + + setup_cmd ip link add br0 type bridge + setup_cmd ip addr add dev br0 ${NSA_IP}/24 + setup_cmd ip -6 addr add dev br0 ${NSA_IP6}/64 nodad + + setup_cmd ip li set ${NSA_DEV} master br0 + setup_cmd ip li set ${NSA_DEV} up + setup_cmd ip li set br0 up + setup_cmd ip li set br0 vrf ${VRF} + + rmmod br_netfilter 2>/dev/null + sleep 5 # DAD + + run_cmd ip neigh flush all + run_cmd ping -c1 -w1 -I br0 ${NSB_IP} + log_test $? 0 "Bridge into VRF - IPv4 ping out" + + run_cmd ip neigh flush all + run_cmd ${ping6} -c1 -w1 -I br0 ${NSB_IP6} + log_test $? 0 "Bridge into VRF - IPv6 ping out" + + run_cmd ip neigh flush all + run_cmd_nsb ping -c1 -w1 ${NSA_IP} + log_test $? 0 "Bridge into VRF - IPv4 ping in" + + run_cmd ip neigh flush all + run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6} + log_test $? 0 "Bridge into VRF - IPv6 ping in" + + modprobe br_netfilter + if [ $? -eq 0 ]; then + run_cmd ip neigh flush all + run_cmd ping -c1 -w1 -I br0 ${NSB_IP} + log_test $? 0 "Bridge into VRF with br_netfilter - IPv4 ping out" + + run_cmd ip neigh flush all + run_cmd ${ping6} -c1 -w1 -I br0 ${NSB_IP6} + log_test $? 0 "Bridge into VRF with br_netfilter - IPv6 ping out" + + run_cmd ip neigh flush all + run_cmd_nsb ping -c1 -w1 ${NSA_IP} + log_test $? 0 "Bridge into VRF with br_netfilter - IPv4 ping in" + + run_cmd ip neigh flush all + run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6} + log_test $? 0 "Bridge into VRF with br_netfilter - IPv6 ping in" + fi + + setup_cmd ip li set br0 nomaster + setup_cmd ip li add br0.100 link br0 type vlan id 100 + setup_cmd ip li set br0.100 vrf ${VRF} up + setup_cmd ip addr add dev br0.100 172.16.101.1/24 + setup_cmd ip -6 addr add dev br0.100 2001:db8:101::1/64 nodad + + setup_cmd_nsb ip li add vlan100 link ${NSB_DEV} type vlan id 100 + setup_cmd_nsb ip addr add dev vlan100 172.16.101.2/24 + setup_cmd_nsb ip -6 addr add dev vlan100 2001:db8:101::2/64 nodad + setup_cmd_nsb ip li set vlan100 up + sleep 1 + + rmmod br_netfilter 2>/dev/null + + run_cmd ip neigh flush all + run_cmd ping -c1 -w1 -I br0.100 172.16.101.2 + log_test $? 0 "Bridge vlan into VRF - IPv4 ping out" + + run_cmd ip neigh flush all + run_cmd ${ping6} -c1 -w1 -I br0.100 2001:db8:101::2 + log_test $? 0 "Bridge vlan into VRF - IPv6 ping out" + + run_cmd ip neigh flush all + run_cmd_nsb ping -c1 -w1 172.16.101.1 + log_test $? 0 "Bridge vlan into VRF - IPv4 ping in" + + run_cmd ip neigh flush all + run_cmd_nsb ${ping6} -c1 -w1 2001:db8:101::1 + log_test $? 0 "Bridge vlan into VRF - IPv6 ping in" + + modprobe br_netfilter + if [ $? -eq 0 ]; then + run_cmd ip neigh flush all + run_cmd ping -c1 -w1 -I br0.100 172.16.101.2 + log_test $? 0 "Bridge vlan into VRF with br_netfilter - IPv4 ping out" + + run_cmd ip neigh flush all + run_cmd ${ping6} -c1 -w1 -I br0.100 2001:db8:101::2 + log_test $? 0 "Bridge vlan into VRF with br_netfilter - IPv6 ping out" + + run_cmd ip neigh flush all + run_cmd_nsb ping -c1 -w1 172.16.101.1 + log_test $? 0 "Bridge vlan into VRF - IPv4 ping in" + + run_cmd ip neigh flush all + run_cmd_nsb ${ping6} -c1 -w1 2001:db8:101::1 + log_test $? 0 "Bridge vlan into VRF - IPv6 ping in" + fi + + setup_cmd ip li del br0 2>/dev/null + setup_cmd_nsb ip li del vlan100 2>/dev/null +} + +use_cases() +{ + log_section "Use cases" + use_case_br +} + +################################################################################ +# usage + +usage() +{ + cat <<EOF +usage: ${0##*/} OPTS + + -4 IPv4 tests only + -6 IPv6 tests only + -t <test> Test name/set to run + -p Pause on fail + -P Pause after each test + -v Be verbose +EOF +} + +################################################################################ +# main + +TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_addr_bind ipv4_runtime ipv4_netfilter" +TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_addr_bind ipv6_runtime ipv6_netfilter" +TESTS_OTHER="use_cases" + +PAUSE_ON_FAIL=no +PAUSE=no + +while getopts :46t:pPvh o +do + case $o in + 4) TESTS=ipv4;; + 6) TESTS=ipv6;; + t) TESTS=$OPTARG;; + p) PAUSE_ON_FAIL=yes;; + P) PAUSE=yes;; + v) VERBOSE=1;; + h) usage; exit 0;; + *) usage; exit 1;; + esac +done + +# make sure we don't pause twice +[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no + +# +# show user test config +# +if [ -z "$TESTS" ]; then + TESTS="$TESTS_IPV4 $TESTS_IPV6 $TESTS_OTHER" +elif [ "$TESTS" = "ipv4" ]; then + TESTS="$TESTS_IPV4" +elif [ "$TESTS" = "ipv6" ]; then + TESTS="$TESTS_IPV6" +fi + +which nettest >/dev/null +if [ $? -ne 0 ]; then + echo "'nettest' command not found; skipping tests" + exit 0 +fi + +declare -i nfail=0 +declare -i nsuccess=0 + +for t in $TESTS +do + case $t in + ipv4_ping|ping) ipv4_ping;; + ipv4_tcp|tcp) ipv4_tcp;; + ipv4_udp|udp) ipv4_udp;; + ipv4_bind|bind) ipv4_addr_bind;; + ipv4_runtime) ipv4_runtime;; + ipv4_netfilter) ipv4_netfilter;; + + ipv6_ping|ping6) ipv6_ping;; + ipv6_tcp|tcp6) ipv6_tcp;; + ipv6_udp|udp6) ipv6_udp;; + ipv6_bind|bind6) ipv6_addr_bind;; + ipv6_runtime) ipv6_runtime;; + ipv6_netfilter) ipv6_netfilter;; + + use_cases) use_cases;; + + # setup namespaces and config, but do not run any tests + setup) setup; exit 0;; + vrf_setup) setup "yes"; exit 0;; + + help) echo "Test names: $TESTS"; exit 0;; + esac +done + +cleanup 2>/dev/null + +printf "\nTests passed: %3d\n" ${nsuccess} +printf "Tests failed: %3d\n" ${nfail} diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh index 8553a67a2322..13d03a6d85ba 100644 --- a/tools/testing/selftests/net/forwarding/devlink_lib.sh +++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh @@ -4,19 +4,21 @@ ############################################################################## # Defines -DEVLINK_DEV=$(devlink port show "${NETIFS[p1]}" -j \ - | jq -r '.port | keys[]' | cut -d/ -f-2) -if [ -z "$DEVLINK_DEV" ]; then - echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it" - exit 1 -fi -if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then - echo "SKIP: devlink device's bus is not PCI" - exit 1 -fi +if [[ ! -v DEVLINK_DEV ]]; then + DEVLINK_DEV=$(devlink port show "${NETIFS[p1]}" -j \ + | jq -r '.port | keys[]' | cut -d/ -f-2) + if [ -z "$DEVLINK_DEV" ]; then + echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it" + exit 1 + fi + if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then + echo "SKIP: devlink device's bus is not PCI" + exit 1 + fi -DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \ - -n | cut -d" " -f3) + DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \ + -n | cut -d" " -f3) +fi ############################################################################## # Sanity checks @@ -27,6 +29,12 @@ if [ $? -ne 0 ]; then exit 1 fi +devlink help 2>&1 | grep trap &> /dev/null +if [ $? -ne 0 ]; then + echo "SKIP: iproute2 too old, missing devlink trap support" + exit 1 +fi + ############################################################################## # Devlink helpers @@ -190,3 +198,160 @@ devlink_tc_bind_pool_th_restore() devlink sb tc bind set $port tc $tc type $dir \ pool ${orig[0]} th ${orig[1]} } + +devlink_traps_num_get() +{ + devlink -j trap | jq '.[]["'$DEVLINK_DEV'"] | length' +} + +devlink_traps_get() +{ + devlink -j trap | jq -r '.[]["'$DEVLINK_DEV'"][].name' +} + +devlink_trap_type_get() +{ + local trap_name=$1; shift + + devlink -j trap show $DEVLINK_DEV trap $trap_name \ + | jq -r '.[][][].type' +} + +devlink_trap_action_set() +{ + local trap_name=$1; shift + local action=$1; shift + + # Pipe output to /dev/null to avoid expected warnings. + devlink trap set $DEVLINK_DEV trap $trap_name \ + action $action &> /dev/null +} + +devlink_trap_action_get() +{ + local trap_name=$1; shift + + devlink -j trap show $DEVLINK_DEV trap $trap_name \ + | jq -r '.[][][].action' +} + +devlink_trap_group_get() +{ + devlink -j trap show $DEVLINK_DEV trap $trap_name \ + | jq -r '.[][][].group' +} + +devlink_trap_metadata_test() +{ + local trap_name=$1; shift + local metadata=$1; shift + + devlink -jv trap show $DEVLINK_DEV trap $trap_name \ + | jq -e '.[][][].metadata | contains(["'$metadata'"])' \ + &> /dev/null +} + +devlink_trap_rx_packets_get() +{ + local trap_name=$1; shift + + devlink -js trap show $DEVLINK_DEV trap $trap_name \ + | jq '.[][][]["stats"]["rx"]["packets"]' +} + +devlink_trap_rx_bytes_get() +{ + local trap_name=$1; shift + + devlink -js trap show $DEVLINK_DEV trap $trap_name \ + | jq '.[][][]["stats"]["rx"]["bytes"]' +} + +devlink_trap_stats_idle_test() +{ + local trap_name=$1; shift + local t0_packets t0_bytes + local t1_packets t1_bytes + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + t0_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + sleep 1 + + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + t1_bytes=$(devlink_trap_rx_bytes_get $trap_name) + + if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then + return 0 + else + return 1 + fi +} + +devlink_traps_enable_all() +{ + local trap_name + + for trap_name in $(devlink_traps_get); do + devlink_trap_action_set $trap_name "trap" + done +} + +devlink_traps_disable_all() +{ + for trap_name in $(devlink_traps_get); do + devlink_trap_action_set $trap_name "drop" + done +} + +devlink_trap_groups_get() +{ + devlink -j trap group | jq -r '.[]["'$DEVLINK_DEV'"][].name' +} + +devlink_trap_group_action_set() +{ + local group_name=$1; shift + local action=$1; shift + + # Pipe output to /dev/null to avoid expected warnings. + devlink trap group set $DEVLINK_DEV group $group_name action $action \ + &> /dev/null +} + +devlink_trap_group_rx_packets_get() +{ + local group_name=$1; shift + + devlink -js trap group show $DEVLINK_DEV group $group_name \ + | jq '.[][][]["stats"]["rx"]["packets"]' +} + +devlink_trap_group_rx_bytes_get() +{ + local group_name=$1; shift + + devlink -js trap group show $DEVLINK_DEV group $group_name \ + | jq '.[][][]["stats"]["rx"]["bytes"]' +} + +devlink_trap_group_stats_idle_test() +{ + local group_name=$1; shift + local t0_packets t0_bytes + local t1_packets t1_bytes + + t0_packets=$(devlink_trap_group_rx_packets_get $group_name) + t0_bytes=$(devlink_trap_group_rx_bytes_get $group_name) + + sleep 1 + + t1_packets=$(devlink_trap_group_rx_packets_get $group_name) + t1_bytes=$(devlink_trap_group_rx_bytes_get $group_name) + + if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then + return 0 + else + return 1 + fi +} diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 9385dc971269..85c587a03c8a 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -250,6 +250,25 @@ setup_wait() sleep $WAIT_TIME } +cmd_jq() +{ + local cmd=$1 + local jq_exp=$2 + local ret + local output + + output="$($cmd)" + # it the command fails, return error right away + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + output=$(echo $output | jq -r "$jq_exp") + echo $output + # return success only in case of non-empty output + [ ! -z "$output" ] +} + lldpad_app_wait_set() { local dev=$1; shift diff --git a/tools/testing/selftests/net/forwarding/tc_common.sh b/tools/testing/selftests/net/forwarding/tc_common.sh index 9d3b64a2a264..315e934358d4 100644 --- a/tools/testing/selftests/net/forwarding/tc_common.sh +++ b/tools/testing/selftests/net/forwarding/tc_common.sh @@ -8,18 +8,9 @@ tc_check_packets() local id=$1 local handle=$2 local count=$3 - local ret - output="$(tc -j -s filter show $id)" - # workaround the jq bug which causes jq to return 0 in case input is "" - ret=$? - if [[ $ret -ne 0 ]]; then - return $ret - fi - echo $output | \ - jq -e ".[] \ - | select(.options.handle == $handle) \ - | select(.options.actions[0].stats.packets == $count)" \ - &> /dev/null - return $? + cmd_jq "tc -j -s filter show $id" \ + ".[] | select(.options.handle == $handle) | \ + select(.options.actions[0].stats.packets == $count)" \ + &> /dev/null } diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh new file mode 100644 index 000000000000..5782433886fc --- /dev/null +++ b/tools/testing/selftests/net/l2tp.sh @@ -0,0 +1,382 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# L2TPv3 tunnel between 2 hosts +# +# host-1 | router | host-2 +# | | +# lo l2tp | | l2tp lo +# 172.16.101.1 172.16.1.1 | | 172.16.1.2 172.16.101.2 +# fc00:101::1 fc00:1::1 | | fc00:1::2 fc00:101::2 +# | | +# eth0 | | eth0 +# 10.1.1.1 | | 10.1.2.1 +# 2001:db8:1::1 | | 2001:db8:2::1 + +VERBOSE=0 +PAUSE_ON_FAIL=no + +which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) + +################################################################################ +# +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + printf "TEST: %-60s [ OK ]\n" "${msg}" + nsuccess=$((nsuccess+1)) + else + ret=1 + nfail=$((nfail+1)) + printf "TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +run_cmd() +{ + local ns + local cmd + local out + local rc + + ns="$1" + shift + cmd="$*" + + if [ "$VERBOSE" = "1" ]; then + printf " COMMAND: $cmd\n" + fi + + out=$(eval ip netns exec ${ns} ${cmd} 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + + [ "$VERBOSE" = "1" ] && echo + + return $rc +} + +################################################################################ +# create namespaces and interconnects + +create_ns() +{ + local ns=$1 + local addr=$2 + local addr6=$3 + + [ -z "${addr}" ] && addr="-" + [ -z "${addr6}" ] && addr6="-" + + ip netns add ${ns} + + ip -netns ${ns} link set lo up + if [ "${addr}" != "-" ]; then + ip -netns ${ns} addr add dev lo ${addr} + fi + if [ "${addr6}" != "-" ]; then + ip -netns ${ns} -6 addr add dev lo ${addr6} + fi + + ip -netns ${ns} ro add unreachable default metric 8192 + ip -netns ${ns} -6 ro add unreachable default metric 8192 + + ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0 +} + +# create veth pair to connect namespaces and apply addresses. +connect_ns() +{ + local ns1=$1 + local ns1_dev=$2 + local ns1_addr=$3 + local ns1_addr6=$4 + local ns2=$5 + local ns2_dev=$6 + local ns2_addr=$7 + local ns2_addr6=$8 + + ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp + ip -netns ${ns1} li set ${ns1_dev} up + ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev} + ip -netns ${ns2} li set ${ns2_dev} up + + if [ "${ns1_addr}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr} + fi + + if [ "${ns1_addr6}" != "-" ]; then + ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6} + ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6} + fi +} + +################################################################################ +# test setup + +cleanup() +{ + local ns + + for ns in host-1 host-2 router + do + ip netns del ${ns} 2>/dev/null + done +} + +setup_l2tp_ipv4() +{ + # + # configure l2tpv3 tunnel on host-1 + # + ip -netns host-1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \ + encap ip local 10.1.1.1 remote 10.1.2.1 + ip -netns host-1 l2tp add session name l2tp4 tunnel_id 1041 \ + session_id 1041 peer_session_id 1042 + ip -netns host-1 link set dev l2tp4 up + ip -netns host-1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2 + + # + # configure l2tpv3 tunnel on host-2 + # + ip -netns host-2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \ + encap ip local 10.1.2.1 remote 10.1.1.1 + ip -netns host-2 l2tp add session name l2tp4 tunnel_id 1042 \ + session_id 1042 peer_session_id 1041 + ip -netns host-2 link set dev l2tp4 up + ip -netns host-2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1 + + # + # add routes to loopback addresses + # + ip -netns host-1 ro add 172.16.101.2/32 via 172.16.1.2 + ip -netns host-2 ro add 172.16.101.1/32 via 172.16.1.1 +} + +setup_l2tp_ipv6() +{ + # + # configure l2tpv3 tunnel on host-1 + # + ip -netns host-1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \ + encap ip local 2001:db8:1::1 remote 2001:db8:2::1 + ip -netns host-1 l2tp add session name l2tp6 tunnel_id 1061 \ + session_id 1061 peer_session_id 1062 + ip -netns host-1 link set dev l2tp6 up + ip -netns host-1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2 + + # + # configure l2tpv3 tunnel on host-2 + # + ip -netns host-2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \ + encap ip local 2001:db8:2::1 remote 2001:db8:1::1 + ip -netns host-2 l2tp add session name l2tp6 tunnel_id 1062 \ + session_id 1062 peer_session_id 1061 + ip -netns host-2 link set dev l2tp6 up + ip -netns host-2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1 + + # + # add routes to loopback addresses + # + ip -netns host-1 -6 ro add fc00:101::2/128 via fc00:1::2 + ip -netns host-2 -6 ro add fc00:101::1/128 via fc00:1::1 +} + +setup() +{ + # start clean + cleanup + + set -e + create_ns host-1 172.16.101.1/32 fc00:101::1/128 + create_ns host-2 172.16.101.2/32 fc00:101::2/128 + create_ns router + + connect_ns host-1 eth0 10.1.1.1/24 2001:db8:1::1/64 \ + router eth1 10.1.1.2/24 2001:db8:1::2/64 + + connect_ns host-2 eth0 10.1.2.1/24 2001:db8:2::1/64 \ + router eth2 10.1.2.2/24 2001:db8:2::2/64 + + ip -netns host-1 ro add 10.1.2.0/24 via 10.1.1.2 + ip -netns host-1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2 + + ip -netns host-2 ro add 10.1.1.0/24 via 10.1.2.2 + ip -netns host-2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2 + + setup_l2tp_ipv4 + setup_l2tp_ipv6 + set +e +} + +setup_ipsec() +{ + # + # IPv4 + # + run_cmd host-1 ip xfrm policy add \ + src 10.1.1.1 dst 10.1.2.1 dir out \ + tmpl proto esp mode transport + + run_cmd host-1 ip xfrm policy add \ + src 10.1.2.1 dst 10.1.1.1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip xfrm policy add \ + src 10.1.1.1 dst 10.1.2.1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip xfrm policy add \ + src 10.1.2.1 dst 10.1.1.1 dir out \ + tmpl proto esp mode transport + + ip -netns host-1 xfrm state add \ + src 10.1.1.1 dst 10.1.2.1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-1 xfrm state add \ + src 10.1.2.1 dst 10.1.1.1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 xfrm state add \ + src 10.1.1.1 dst 10.1.2.1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 xfrm state add \ + src 10.1.2.1 dst 10.1.1.1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + # + # IPV6 + # + run_cmd host-1 ip -6 xfrm policy add \ + src 2001:db8:1::1 dst 2001:db8:2::1 dir out \ + tmpl proto esp mode transport + + run_cmd host-1 ip -6 xfrm policy add \ + src 2001:db8:2::1 dst 2001:db8:1::1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip -6 xfrm policy add \ + src 2001:db8:1::1 dst 2001:db8:2::1 dir in \ + tmpl proto esp mode transport + + run_cmd host-2 ip -6 xfrm policy add \ + src 2001:db8:2::1 dst 2001:db8:1::1 dir out \ + tmpl proto esp mode transport + + ip -netns host-1 -6 xfrm state add \ + src 2001:db8:1::1 dst 2001:db8:2::1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-1 -6 xfrm state add \ + src 2001:db8:2::1 dst 2001:db8:1::1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 -6 xfrm state add \ + src 2001:db8:1::1 dst 2001:db8:2::1 \ + spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport + + ip -netns host-2 -6 xfrm state add \ + src 2001:db8:2::1 dst 2001:db8:1::1 \ + spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \ + 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport +} + +teardown_ipsec() +{ + run_cmd host-1 ip xfrm state flush + run_cmd host-1 ip xfrm policy flush + run_cmd host-2 ip xfrm state flush + run_cmd host-2 ip xfrm policy flush +} + +################################################################################ +# generate traffic through tunnel for various cases + +run_ping() +{ + local desc="$1" + + run_cmd host-1 ping -c1 -w1 172.16.1.2 + log_test $? 0 "IPv4 basic L2TP tunnel ${desc}" + + run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 + log_test $? 0 "IPv4 route through L2TP tunnel ${desc}" + + run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2 + log_test $? 0 "IPv6 basic L2TP tunnel ${desc}" + + run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 + log_test $? 0 "IPv6 route through L2TP tunnel ${desc}" +} + +run_tests() +{ + local desc + + setup + run_ping + + setup_ipsec + run_ping "- with IPsec" + run_cmd host-1 ping -c1 -w1 172.16.1.2 + log_test $? 0 "IPv4 basic L2TP tunnel ${desc}" + + run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2 + log_test $? 0 "IPv4 route through L2TP tunnel ${desc}" + + run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2 + log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec" + + run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2 + log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec" + + teardown_ipsec + run_ping "- after IPsec teardown" +} + +################################################################################ +# main + +declare -i nfail=0 +declare -i nsuccess=0 + +while getopts :pv o +do + case $o in + p) PAUSE_ON_FAIL=yes;; + v) VERBOSE=$(($VERBOSE + 1));; + *) exit 1;; + esac +done + +run_tests +cleanup + +printf "\nTests passed: %3d\n" ${nsuccess} +printf "Tests failed: %3d\n" ${nfail} diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c new file mode 100644 index 000000000000..c08f4db8330d --- /dev/null +++ b/tools/testing/selftests/net/nettest.c @@ -0,0 +1,1757 @@ +// SPDX-License-Identifier: GPL-2.0 +/* nettest - used for functional tests of networking APIs + * + * Copyright (c) 2013-2019 David Ahern <dsahern@gmail.com>. All rights reserved. + */ + +#define _GNU_SOURCE +#include <features.h> +#include <sys/types.h> +#include <sys/ioctl.h> +#include <sys/socket.h> +#include <linux/tcp.h> +#include <arpa/inet.h> +#include <net/if.h> +#include <netinet/in.h> +#include <netdb.h> +#include <fcntl.h> +#include <libgen.h> +#include <limits.h> +#include <stdarg.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <time.h> +#include <errno.h> + +#ifndef IPV6_UNICAST_IF +#define IPV6_UNICAST_IF 76 +#endif +#ifndef IPV6_MULTICAST_IF +#define IPV6_MULTICAST_IF 17 +#endif + +#define DEFAULT_PORT 12345 + +#ifndef MAX +#define MAX(a, b) ((a) > (b) ? (a) : (b)) +#endif +#ifndef MIN +#define MIN(a, b) ((a) < (b) ? (a) : (b)) +#endif + +struct sock_args { + /* local address */ + union { + struct in_addr in; + struct in6_addr in6; + } local_addr; + + /* remote address */ + union { + struct in_addr in; + struct in6_addr in6; + } remote_addr; + int scope_id; /* remote scope; v6 send only */ + + struct in_addr grp; /* multicast group */ + + unsigned int has_local_ip:1, + has_remote_ip:1, + has_grp:1, + has_expected_laddr:1, + has_expected_raddr:1, + bind_test_only:1; + + unsigned short port; + + int type; /* DGRAM, STREAM, RAW */ + int protocol; + int version; /* AF_INET/AF_INET6 */ + + int use_setsockopt; + int use_cmsg; + const char *dev; + int ifindex; + const char *password; + + /* expected addresses and device index for connection */ + int expected_ifindex; + + /* local address */ + union { + struct in_addr in; + struct in6_addr in6; + } expected_laddr; + + /* remote address */ + union { + struct in_addr in; + struct in6_addr in6; + } expected_raddr; +}; + +static int server_mode; +static unsigned int prog_timeout = 5; +static unsigned int interactive; +static int iter = 1; +static char *msg = "Hello world!"; +static int msglen; +static int quiet; +static int try_broadcast = 1; + +static char *timestamp(char *timebuf, int buflen) +{ + time_t now; + + now = time(NULL); + if (strftime(timebuf, buflen, "%T", localtime(&now)) == 0) { + memset(timebuf, 0, buflen); + strncpy(timebuf, "00:00:00", buflen-1); + } + + return timebuf; +} + +static void log_msg(const char *format, ...) +{ + char timebuf[64]; + va_list args; + + if (quiet) + return; + + fprintf(stdout, "%s %s:", + timestamp(timebuf, sizeof(timebuf)), + server_mode ? "server" : "client"); + va_start(args, format); + vfprintf(stdout, format, args); + va_end(args); + + fflush(stdout); +} + +static void log_error(const char *format, ...) +{ + char timebuf[64]; + va_list args; + + if (quiet) + return; + + fprintf(stderr, "%s %s:", + timestamp(timebuf, sizeof(timebuf)), + server_mode ? "server" : "client"); + va_start(args, format); + vfprintf(stderr, format, args); + va_end(args); + + fflush(stderr); +} + +static void log_err_errno(const char *fmt, ...) +{ + char timebuf[64]; + va_list args; + + if (quiet) + return; + + fprintf(stderr, "%s %s: ", + timestamp(timebuf, sizeof(timebuf)), + server_mode ? "server" : "client"); + va_start(args, fmt); + vfprintf(stderr, fmt, args); + va_end(args); + + fprintf(stderr, ": %d: %s\n", errno, strerror(errno)); + fflush(stderr); +} + +static void log_address(const char *desc, struct sockaddr *sa) +{ + char addrstr[64]; + + if (quiet) + return; + + if (sa->sa_family == AF_INET) { + struct sockaddr_in *s = (struct sockaddr_in *) sa; + + log_msg("%s %s:%d", + desc, + inet_ntop(AF_INET, &s->sin_addr, addrstr, + sizeof(addrstr)), + ntohs(s->sin_port)); + + } else if (sa->sa_family == AF_INET6) { + struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa; + + log_msg("%s [%s]:%d", + desc, + inet_ntop(AF_INET6, &s6->sin6_addr, addrstr, + sizeof(addrstr)), + ntohs(s6->sin6_port)); + } + + printf("\n"); + + fflush(stdout); +} + +static int tcp_md5sig(int sd, void *addr, socklen_t alen, const char *password) +{ + struct tcp_md5sig md5sig; + int keylen = password ? strlen(password) : 0; + int rc; + + memset(&md5sig, 0, sizeof(md5sig)); + memcpy(&md5sig.tcpm_addr, addr, alen); + md5sig.tcpm_keylen = keylen; + + if (keylen) + memcpy(md5sig.tcpm_key, password, keylen); + + rc = setsockopt(sd, IPPROTO_TCP, TCP_MD5SIG, &md5sig, sizeof(md5sig)); + if (rc < 0) { + /* ENOENT is harmless. Returned when a password is cleared */ + if (errno == ENOENT) + rc = 0; + else + log_err_errno("setsockopt(TCP_MD5SIG)"); + } + + return rc; +} + +static int tcp_md5_remote(int sd, struct sock_args *args) +{ + struct sockaddr_in sin = { + .sin_family = AF_INET, + }; + struct sockaddr_in6 sin6 = { + .sin6_family = AF_INET6, + }; + void *addr; + int alen; + + switch (args->version) { + case AF_INET: + sin.sin_port = htons(args->port); + sin.sin_addr = args->remote_addr.in; + addr = &sin; + alen = sizeof(sin); + break; + case AF_INET6: + sin6.sin6_port = htons(args->port); + sin6.sin6_addr = args->remote_addr.in6; + addr = &sin6; + alen = sizeof(sin6); + break; + default: + log_error("unknown address family\n"); + exit(1); + } + + if (tcp_md5sig(sd, addr, alen, args->password)) + return -1; + + return 0; +} + +static int get_ifidx(const char *ifname) +{ + struct ifreq ifdata; + int sd, rc; + + if (!ifname || *ifname == '\0') + return -1; + + memset(&ifdata, 0, sizeof(ifdata)); + + strcpy(ifdata.ifr_name, ifname); + + sd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP); + if (sd < 0) { + log_err_errno("socket failed"); + return -1; + } + + rc = ioctl(sd, SIOCGIFINDEX, (char *)&ifdata); + close(sd); + if (rc != 0) { + log_err_errno("ioctl(SIOCGIFINDEX) failed"); + return -1; + } + + return ifdata.ifr_ifindex; +} + +static int bind_to_device(int sd, const char *name) +{ + int rc; + + rc = setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, name, strlen(name)+1); + if (rc < 0) + log_err_errno("setsockopt(SO_BINDTODEVICE)"); + + return rc; +} + +static int get_bind_to_device(int sd, char *name, size_t len) +{ + int rc; + socklen_t optlen = len; + + name[0] = '\0'; + rc = getsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, name, &optlen); + if (rc < 0) + log_err_errno("setsockopt(SO_BINDTODEVICE)"); + + return rc; +} + +static int check_device(int sd, struct sock_args *args) +{ + int ifindex = 0; + char name[32]; + + if (get_bind_to_device(sd, name, sizeof(name))) + *name = '\0'; + else + ifindex = get_ifidx(name); + + log_msg(" bound to device %s/%d\n", + *name ? name : "<none>", ifindex); + + if (!args->expected_ifindex) + return 0; + + if (args->expected_ifindex != ifindex) { + log_error("Device index mismatch: expected %d have %d\n", + args->expected_ifindex, ifindex); + return 1; + } + + log_msg("Device index matches: expected %d have %d\n", + args->expected_ifindex, ifindex); + + return 0; +} + +static int set_pktinfo_v4(int sd) +{ + int one = 1; + int rc; + + rc = setsockopt(sd, SOL_IP, IP_PKTINFO, &one, sizeof(one)); + if (rc < 0 && rc != -ENOTSUP) + log_err_errno("setsockopt(IP_PKTINFO)"); + + return rc; +} + +static int set_recvpktinfo_v6(int sd) +{ + int one = 1; + int rc; + + rc = setsockopt(sd, SOL_IPV6, IPV6_RECVPKTINFO, &one, sizeof(one)); + if (rc < 0 && rc != -ENOTSUP) + log_err_errno("setsockopt(IPV6_RECVPKTINFO)"); + + return rc; +} + +static int set_recverr_v4(int sd) +{ + int one = 1; + int rc; + + rc = setsockopt(sd, SOL_IP, IP_RECVERR, &one, sizeof(one)); + if (rc < 0 && rc != -ENOTSUP) + log_err_errno("setsockopt(IP_RECVERR)"); + + return rc; +} + +static int set_recverr_v6(int sd) +{ + int one = 1; + int rc; + + rc = setsockopt(sd, SOL_IPV6, IPV6_RECVERR, &one, sizeof(one)); + if (rc < 0 && rc != -ENOTSUP) + log_err_errno("setsockopt(IPV6_RECVERR)"); + + return rc; +} + +static int set_unicast_if(int sd, int ifindex, int version) +{ + int opt = IP_UNICAST_IF; + int level = SOL_IP; + int rc; + + ifindex = htonl(ifindex); + + if (version == AF_INET6) { + opt = IPV6_UNICAST_IF; + level = SOL_IPV6; + } + rc = setsockopt(sd, level, opt, &ifindex, sizeof(ifindex)); + if (rc < 0) + log_err_errno("setsockopt(IP_UNICAST_IF)"); + + return rc; +} + +static int set_multicast_if(int sd, int ifindex) +{ + struct ip_mreqn mreq = { .imr_ifindex = ifindex }; + int rc; + + rc = setsockopt(sd, SOL_IP, IP_MULTICAST_IF, &mreq, sizeof(mreq)); + if (rc < 0) + log_err_errno("setsockopt(IP_MULTICAST_IF)"); + + return rc; +} + +static int set_membership(int sd, uint32_t grp, uint32_t addr, int ifindex) +{ + uint32_t if_addr = addr; + struct ip_mreqn mreq; + int rc; + + if (addr == htonl(INADDR_ANY) && !ifindex) { + log_error("Either local address or device needs to be given for multicast membership\n"); + return -1; + } + + mreq.imr_multiaddr.s_addr = grp; + mreq.imr_address.s_addr = if_addr; + mreq.imr_ifindex = ifindex; + + rc = setsockopt(sd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); + if (rc < 0) { + log_err_errno("setsockopt(IP_ADD_MEMBERSHIP)"); + return -1; + } + + return 0; +} + +static int set_broadcast(int sd) +{ + unsigned int one = 1; + int rc = 0; + + if (setsockopt(sd, SOL_SOCKET, SO_BROADCAST, &one, sizeof(one)) != 0) { + log_err_errno("setsockopt(SO_BROADCAST)"); + rc = -1; + } + + return rc; +} + +static int set_reuseport(int sd) +{ + unsigned int one = 1; + int rc = 0; + + if (setsockopt(sd, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one)) != 0) { + log_err_errno("setsockopt(SO_REUSEPORT)"); + rc = -1; + } + + return rc; +} + +static int set_reuseaddr(int sd) +{ + unsigned int one = 1; + int rc = 0; + + if (setsockopt(sd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) != 0) { + log_err_errno("setsockopt(SO_REUSEADDR)"); + rc = -1; + } + + return rc; +} + +static int str_to_uint(const char *str, int min, int max, unsigned int *value) +{ + int number; + char *end; + + errno = 0; + number = (unsigned int) strtoul(str, &end, 0); + + /* entire string should be consumed by conversion + * and value should be between min and max + */ + if (((*end == '\0') || (*end == '\n')) && (end != str) && + (errno != ERANGE) && (min <= number) && (number <= max)) { + *value = number; + return 0; + } + + return -1; +} + +static int expected_addr_match(struct sockaddr *sa, void *expected, + const char *desc) +{ + char addrstr[64]; + int rc = 0; + + if (sa->sa_family == AF_INET) { + struct sockaddr_in *s = (struct sockaddr_in *) sa; + struct in_addr *exp_in = (struct in_addr *) expected; + + if (s->sin_addr.s_addr != exp_in->s_addr) { + log_error("%s address does not match expected %s", + desc, + inet_ntop(AF_INET, exp_in, + addrstr, sizeof(addrstr))); + rc = 1; + } + } else if (sa->sa_family == AF_INET6) { + struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa; + struct in6_addr *exp_in = (struct in6_addr *) expected; + + if (memcmp(&s6->sin6_addr, exp_in, sizeof(*exp_in))) { + log_error("%s address does not match expected %s", + desc, + inet_ntop(AF_INET6, exp_in, + addrstr, sizeof(addrstr))); + rc = 1; + } + } else { + log_error("%s address does not match expected - unknown family", + desc); + rc = 1; + } + + if (!rc) + log_msg("%s address matches expected\n", desc); + + return rc; +} + +static int show_sockstat(int sd, struct sock_args *args) +{ + struct sockaddr_in6 local_addr, remote_addr; + socklen_t alen = sizeof(local_addr); + struct sockaddr *sa; + const char *desc; + int rc = 0; + + desc = server_mode ? "server local:" : "client local:"; + sa = (struct sockaddr *) &local_addr; + if (getsockname(sd, sa, &alen) == 0) { + log_address(desc, sa); + + if (args->has_expected_laddr) { + rc = expected_addr_match(sa, &args->expected_laddr, + "local"); + } + } else { + log_err_errno("getsockname failed"); + } + + sa = (struct sockaddr *) &remote_addr; + desc = server_mode ? "server peer:" : "client peer:"; + if (getpeername(sd, sa, &alen) == 0) { + log_address(desc, sa); + + if (args->has_expected_raddr) { + rc |= expected_addr_match(sa, &args->expected_raddr, + "remote"); + } + } else { + log_err_errno("getpeername failed"); + } + + return rc; +} + +static int get_index_from_cmsg(struct msghdr *m) +{ + struct cmsghdr *cm; + int ifindex = 0; + char buf[64]; + + for (cm = (struct cmsghdr *)CMSG_FIRSTHDR(m); + m->msg_controllen != 0 && cm; + cm = (struct cmsghdr *)CMSG_NXTHDR(m, cm)) { + + if (cm->cmsg_level == SOL_IP && + cm->cmsg_type == IP_PKTINFO) { + struct in_pktinfo *pi; + + pi = (struct in_pktinfo *)(CMSG_DATA(cm)); + inet_ntop(AF_INET, &pi->ipi_addr, buf, sizeof(buf)); + ifindex = pi->ipi_ifindex; + } else if (cm->cmsg_level == SOL_IPV6 && + cm->cmsg_type == IPV6_PKTINFO) { + struct in6_pktinfo *pi6; + + pi6 = (struct in6_pktinfo *)(CMSG_DATA(cm)); + inet_ntop(AF_INET6, &pi6->ipi6_addr, buf, sizeof(buf)); + ifindex = pi6->ipi6_ifindex; + } + } + + if (ifindex) { + log_msg(" pktinfo: ifindex %d dest addr %s\n", + ifindex, buf); + } + return ifindex; +} + +static int send_msg_no_cmsg(int sd, void *addr, socklen_t alen) +{ + int err; + +again: + err = sendto(sd, msg, msglen, 0, addr, alen); + if (err < 0) { + if (errno == EACCES && try_broadcast) { + try_broadcast = 0; + if (!set_broadcast(sd)) + goto again; + errno = EACCES; + } + + log_err_errno("sendto failed"); + return 1; + } + + return 0; +} + +static int send_msg_cmsg(int sd, void *addr, socklen_t alen, + int ifindex, int version) +{ + unsigned char cmsgbuf[64]; + struct iovec iov[2]; + struct cmsghdr *cm; + struct msghdr m; + int err; + + iov[0].iov_base = msg; + iov[0].iov_len = msglen; + m.msg_iov = iov; + m.msg_iovlen = 1; + m.msg_name = (caddr_t)addr; + m.msg_namelen = alen; + + memset(cmsgbuf, 0, sizeof(cmsgbuf)); + cm = (struct cmsghdr *)cmsgbuf; + m.msg_control = (caddr_t)cm; + + if (version == AF_INET) { + struct in_pktinfo *pi; + + cm->cmsg_level = SOL_IP; + cm->cmsg_type = IP_PKTINFO; + cm->cmsg_len = CMSG_LEN(sizeof(struct in_pktinfo)); + pi = (struct in_pktinfo *)(CMSG_DATA(cm)); + pi->ipi_ifindex = ifindex; + + m.msg_controllen = cm->cmsg_len; + + } else if (version == AF_INET6) { + struct in6_pktinfo *pi6; + + cm->cmsg_level = SOL_IPV6; + cm->cmsg_type = IPV6_PKTINFO; + cm->cmsg_len = CMSG_LEN(sizeof(struct in6_pktinfo)); + + pi6 = (struct in6_pktinfo *)(CMSG_DATA(cm)); + pi6->ipi6_ifindex = ifindex; + + m.msg_controllen = cm->cmsg_len; + } + +again: + err = sendmsg(sd, &m, 0); + if (err < 0) { + if (errno == EACCES && try_broadcast) { + try_broadcast = 0; + if (!set_broadcast(sd)) + goto again; + errno = EACCES; + } + + log_err_errno("sendmsg failed"); + return 1; + } + + return 0; +} + + +static int send_msg(int sd, void *addr, socklen_t alen, struct sock_args *args) +{ + if (args->type == SOCK_STREAM) { + if (write(sd, msg, msglen) < 0) { + log_err_errno("write failed sending msg to peer"); + return 1; + } + } else if (args->ifindex && args->use_cmsg) { + if (send_msg_cmsg(sd, addr, alen, args->ifindex, args->version)) + return 1; + } else { + if (send_msg_no_cmsg(sd, addr, alen)) + return 1; + } + + log_msg("Sent message:\n"); + log_msg(" %.24s%s\n", msg, msglen > 24 ? " ..." : ""); + + return 0; +} + +static int socket_read_dgram(int sd, struct sock_args *args) +{ + unsigned char addr[sizeof(struct sockaddr_in6)]; + struct sockaddr *sa = (struct sockaddr *) addr; + socklen_t alen = sizeof(addr); + struct iovec iov[2]; + struct msghdr m = { + .msg_name = (caddr_t)addr, + .msg_namelen = alen, + .msg_iov = iov, + .msg_iovlen = 1, + }; + unsigned char cmsgbuf[256]; + struct cmsghdr *cm = (struct cmsghdr *)cmsgbuf; + char buf[16*1024]; + int ifindex; + int len; + + iov[0].iov_base = (caddr_t)buf; + iov[0].iov_len = sizeof(buf); + + memset(cmsgbuf, 0, sizeof(cmsgbuf)); + m.msg_control = (caddr_t)cm; + m.msg_controllen = sizeof(cmsgbuf); + + len = recvmsg(sd, &m, 0); + if (len == 0) { + log_msg("peer closed connection.\n"); + return 0; + } else if (len < 0) { + log_msg("failed to read message: %d: %s\n", + errno, strerror(errno)); + return -1; + } + + buf[len] = '\0'; + + log_address("Message from:", sa); + log_msg(" %.24s%s\n", buf, len > 24 ? " ..." : ""); + + ifindex = get_index_from_cmsg(&m); + if (args->expected_ifindex) { + if (args->expected_ifindex != ifindex) { + log_error("Device index mismatch: expected %d have %d\n", + args->expected_ifindex, ifindex); + return -1; + } + log_msg("Device index matches: expected %d have %d\n", + args->expected_ifindex, ifindex); + } + + if (!interactive && server_mode) { + if (sa->sa_family == AF_INET6) { + struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa; + struct in6_addr *in6 = &s6->sin6_addr; + + if (IN6_IS_ADDR_V4MAPPED(in6)) { + const uint32_t *pa = (uint32_t *) &in6->s6_addr; + struct in_addr in4; + struct sockaddr_in *sin; + + sin = (struct sockaddr_in *) addr; + pa += 3; + in4.s_addr = *pa; + sin->sin_addr = in4; + sin->sin_family = AF_INET; + if (send_msg_cmsg(sd, addr, alen, + ifindex, AF_INET) < 0) + goto out_err; + } + } +again: + iov[0].iov_len = len; + + if (args->version == AF_INET6) { + struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa; + + if (args->dev) { + /* avoid PKTINFO conflicts with bindtodev */ + if (sendto(sd, buf, len, 0, + (void *) addr, alen) < 0) + goto out_err; + } else { + /* kernel is allowing scope_id to be set to VRF + * index for LLA. for sends to global address + * reset scope id + */ + s6->sin6_scope_id = ifindex; + if (sendmsg(sd, &m, 0) < 0) + goto out_err; + } + } else { + int err; + + err = sendmsg(sd, &m, 0); + if (err < 0) { + if (errno == EACCES && try_broadcast) { + try_broadcast = 0; + if (!set_broadcast(sd)) + goto again; + errno = EACCES; + } + goto out_err; + } + } + log_msg("Sent message:\n"); + log_msg(" %.24s%s\n", buf, len > 24 ? " ..." : ""); + } + + return 1; +out_err: + log_err_errno("failed to send msg to peer"); + return -1; +} + +static int socket_read_stream(int sd) +{ + char buf[1024]; + int len; + + len = read(sd, buf, sizeof(buf)-1); + if (len == 0) { + log_msg("client closed connection.\n"); + return 0; + } else if (len < 0) { + log_msg("failed to read message\n"); + return -1; + } + + buf[len] = '\0'; + log_msg("Incoming message:\n"); + log_msg(" %.24s%s\n", buf, len > 24 ? " ..." : ""); + + if (!interactive && server_mode) { + if (write(sd, buf, len) < 0) { + log_err_errno("failed to send buf"); + return -1; + } + log_msg("Sent message:\n"); + log_msg(" %.24s%s\n", buf, len > 24 ? " ..." : ""); + } + + return 1; +} + +static int socket_read(int sd, struct sock_args *args) +{ + if (args->type == SOCK_STREAM) + return socket_read_stream(sd); + + return socket_read_dgram(sd, args); +} + +static int stdin_to_socket(int sd, int type, void *addr, socklen_t alen) +{ + char buf[1024]; + int len; + + if (fgets(buf, sizeof(buf), stdin) == NULL) + return 0; + + len = strlen(buf); + if (type == SOCK_STREAM) { + if (write(sd, buf, len) < 0) { + log_err_errno("failed to send buf"); + return -1; + } + } else { + int err; + +again: + err = sendto(sd, buf, len, 0, addr, alen); + if (err < 0) { + if (errno == EACCES && try_broadcast) { + try_broadcast = 0; + if (!set_broadcast(sd)) + goto again; + errno = EACCES; + } + log_err_errno("failed to send msg to peer"); + return -1; + } + } + log_msg("Sent message:\n"); + log_msg(" %.24s%s\n", buf, len > 24 ? " ..." : ""); + + return 1; +} + +static void set_recv_attr(int sd, int version) +{ + if (version == AF_INET6) { + set_recvpktinfo_v6(sd); + set_recverr_v6(sd); + } else { + set_pktinfo_v4(sd); + set_recverr_v4(sd); + } +} + +static int msg_loop(int client, int sd, void *addr, socklen_t alen, + struct sock_args *args) +{ + struct timeval timeout = { .tv_sec = prog_timeout }, *ptval = NULL; + fd_set rfds; + int nfds; + int rc; + + if (args->type != SOCK_STREAM) + set_recv_attr(sd, args->version); + + if (msg) { + msglen = strlen(msg); + + /* client sends first message */ + if (client) { + if (send_msg(sd, addr, alen, args)) + return 1; + } + if (!interactive) { + ptval = &timeout; + if (!prog_timeout) + timeout.tv_sec = 5; + } + } + + nfds = interactive ? MAX(fileno(stdin), sd) + 1 : sd + 1; + while (1) { + FD_ZERO(&rfds); + FD_SET(sd, &rfds); + if (interactive) + FD_SET(fileno(stdin), &rfds); + + rc = select(nfds, &rfds, NULL, NULL, ptval); + if (rc < 0) { + if (errno == EINTR) + continue; + + rc = 1; + log_err_errno("select failed"); + break; + } else if (rc == 0) { + log_error("Timed out waiting for response\n"); + rc = 2; + break; + } + + if (FD_ISSET(sd, &rfds)) { + rc = socket_read(sd, args); + if (rc < 0) { + rc = 1; + break; + } + if (rc == 0) + break; + } + + rc = 0; + + if (FD_ISSET(fileno(stdin), &rfds)) { + if (stdin_to_socket(sd, args->type, addr, alen) <= 0) + break; + } + + if (interactive) + continue; + + if (iter != -1) { + --iter; + if (iter == 0) + break; + } + + log_msg("Going into quiet mode\n"); + quiet = 1; + + if (client) { + if (send_msg(sd, addr, alen, args)) { + rc = 1; + break; + } + } + } + + return rc; +} + +static int msock_init(struct sock_args *args, int server) +{ + uint32_t if_addr = htonl(INADDR_ANY); + struct sockaddr_in laddr = { + .sin_family = AF_INET, + .sin_port = htons(args->port), + }; + int one = 1; + int sd; + + if (!server && args->has_local_ip) + if_addr = args->local_addr.in.s_addr; + + sd = socket(PF_INET, SOCK_DGRAM, 0); + if (sd < 0) { + log_err_errno("socket"); + return -1; + } + + if (setsockopt(sd, SOL_SOCKET, SO_REUSEADDR, + (char *)&one, sizeof(one)) < 0) { + log_err_errno("Setting SO_REUSEADDR error"); + goto out_err; + } + + if (setsockopt(sd, SOL_SOCKET, SO_BROADCAST, + (char *)&one, sizeof(one)) < 0) + log_err_errno("Setting SO_BROADCAST error"); + + if (args->dev && bind_to_device(sd, args->dev) != 0) + goto out_err; + else if (args->use_setsockopt && + set_multicast_if(sd, args->ifindex)) + goto out_err; + + laddr.sin_addr.s_addr = if_addr; + + if (bind(sd, (struct sockaddr *) &laddr, sizeof(laddr)) < 0) { + log_err_errno("bind failed"); + goto out_err; + } + + if (server && + set_membership(sd, args->grp.s_addr, + args->local_addr.in.s_addr, args->ifindex)) + goto out_err; + + return sd; +out_err: + close(sd); + return -1; +} + +static int msock_server(struct sock_args *args) +{ + return msock_init(args, 1); +} + +static int msock_client(struct sock_args *args) +{ + return msock_init(args, 0); +} + +static int bind_socket(int sd, struct sock_args *args) +{ + struct sockaddr_in serv_addr = { + .sin_family = AF_INET, + }; + struct sockaddr_in6 serv6_addr = { + .sin6_family = AF_INET6, + }; + void *addr; + socklen_t alen; + + if (!args->has_local_ip && args->type == SOCK_RAW) + return 0; + + switch (args->version) { + case AF_INET: + serv_addr.sin_port = htons(args->port); + serv_addr.sin_addr = args->local_addr.in; + addr = &serv_addr; + alen = sizeof(serv_addr); + break; + + case AF_INET6: + serv6_addr.sin6_port = htons(args->port); + serv6_addr.sin6_addr = args->local_addr.in6; + addr = &serv6_addr; + alen = sizeof(serv6_addr); + break; + + default: + log_error("Invalid address family\n"); + return -1; + } + + if (bind(sd, addr, alen) < 0) { + log_err_errno("error binding socket"); + return -1; + } + + return 0; +} + +static int lsock_init(struct sock_args *args) +{ + long flags; + int sd; + + sd = socket(args->version, args->type, args->protocol); + if (sd < 0) { + log_err_errno("Error opening socket"); + return -1; + } + + if (set_reuseaddr(sd) != 0) + goto err; + + if (set_reuseport(sd) != 0) + goto err; + + if (args->dev && bind_to_device(sd, args->dev) != 0) + goto err; + else if (args->use_setsockopt && + set_unicast_if(sd, args->ifindex, args->version)) + goto err; + + if (bind_socket(sd, args)) + goto err; + + if (args->bind_test_only) + goto out; + + if (args->type == SOCK_STREAM && listen(sd, 1) < 0) { + log_err_errno("listen failed"); + goto err; + } + + flags = fcntl(sd, F_GETFL); + if ((flags < 0) || (fcntl(sd, F_SETFL, flags|O_NONBLOCK) < 0)) { + log_err_errno("Failed to set non-blocking option"); + goto err; + } + + if (fcntl(sd, F_SETFD, FD_CLOEXEC) < 0) + log_err_errno("Failed to set close-on-exec flag"); + +out: + return sd; + +err: + close(sd); + return -1; +} + +static int do_server(struct sock_args *args) +{ + struct timeval timeout = { .tv_sec = prog_timeout }, *ptval = NULL; + unsigned char addr[sizeof(struct sockaddr_in6)] = {}; + socklen_t alen = sizeof(addr); + int lsd, csd = -1; + + fd_set rfds; + int rc; + + if (prog_timeout) + ptval = &timeout; + + if (args->has_grp) + lsd = msock_server(args); + else + lsd = lsock_init(args); + + if (lsd < 0) + return 1; + + if (args->bind_test_only) { + close(lsd); + return 0; + } + + if (args->type != SOCK_STREAM) { + rc = msg_loop(0, lsd, (void *) addr, alen, args); + close(lsd); + return rc; + } + + if (args->password && tcp_md5_remote(lsd, args)) { + close(lsd); + return -1; + } + + while (1) { + log_msg("\n"); + log_msg("waiting for client connection.\n"); + FD_ZERO(&rfds); + FD_SET(lsd, &rfds); + + rc = select(lsd+1, &rfds, NULL, NULL, ptval); + if (rc == 0) { + rc = 2; + break; + } + + if (rc < 0) { + if (errno == EINTR) + continue; + + log_err_errno("select failed"); + break; + } + + if (FD_ISSET(lsd, &rfds)) { + + csd = accept(lsd, (void *) addr, &alen); + if (csd < 0) { + log_err_errno("accept failed"); + break; + } + + rc = show_sockstat(csd, args); + if (rc) + break; + + rc = check_device(csd, args); + if (rc) + break; + } + + rc = msg_loop(0, csd, (void *) addr, alen, args); + close(csd); + + if (!interactive) + break; + } + + close(lsd); + + return rc; +} + +static int wait_for_connect(int sd) +{ + struct timeval _tv = { .tv_sec = prog_timeout }, *tv = NULL; + fd_set wfd; + int val = 0, sz = sizeof(val); + int rc; + + FD_ZERO(&wfd); + FD_SET(sd, &wfd); + + if (prog_timeout) + tv = &_tv; + + rc = select(FD_SETSIZE, NULL, &wfd, NULL, tv); + if (rc == 0) { + log_error("connect timed out\n"); + return -2; + } else if (rc < 0) { + log_err_errno("select failed"); + return -3; + } + + if (getsockopt(sd, SOL_SOCKET, SO_ERROR, &val, (socklen_t *)&sz) < 0) { + log_err_errno("getsockopt(SO_ERROR) failed"); + return -4; + } + + if (val != 0) { + log_error("connect failed: %d: %s\n", val, strerror(val)); + return -1; + } + + return 0; +} + +static int connectsock(void *addr, socklen_t alen, struct sock_args *args) +{ + int sd, rc = -1; + long flags; + + sd = socket(args->version, args->type, args->protocol); + if (sd < 0) { + log_err_errno("Failed to create socket"); + return -1; + } + + flags = fcntl(sd, F_GETFL); + if ((flags < 0) || (fcntl(sd, F_SETFL, flags|O_NONBLOCK) < 0)) { + log_err_errno("Failed to set non-blocking option"); + goto err; + } + + if (set_reuseport(sd) != 0) + goto err; + + if (args->dev && bind_to_device(sd, args->dev) != 0) + goto err; + else if (args->use_setsockopt && + set_unicast_if(sd, args->ifindex, args->version)) + goto err; + + if (args->has_local_ip && bind_socket(sd, args)) + goto err; + + if (args->type != SOCK_STREAM) + goto out; + + if (args->password && tcp_md5sig(sd, addr, alen, args->password)) + goto err; + + if (args->bind_test_only) + goto out; + + if (connect(sd, addr, alen) < 0) { + if (errno != EINPROGRESS) { + log_err_errno("Failed to connect to remote host"); + rc = -1; + goto err; + } + rc = wait_for_connect(sd); + if (rc < 0) + goto err; + } +out: + return sd; + +err: + close(sd); + return rc; +} + +static int do_client(struct sock_args *args) +{ + struct sockaddr_in sin = { + .sin_family = AF_INET, + }; + struct sockaddr_in6 sin6 = { + .sin6_family = AF_INET6, + }; + void *addr; + int alen; + int rc = 0; + int sd; + + if (!args->has_remote_ip && !args->has_grp) { + fprintf(stderr, "remote IP or multicast group not given\n"); + return 1; + } + + switch (args->version) { + case AF_INET: + sin.sin_port = htons(args->port); + if (args->has_grp) + sin.sin_addr = args->grp; + else + sin.sin_addr = args->remote_addr.in; + addr = &sin; + alen = sizeof(sin); + break; + case AF_INET6: + sin6.sin6_port = htons(args->port); + sin6.sin6_addr = args->remote_addr.in6; + sin6.sin6_scope_id = args->scope_id; + addr = &sin6; + alen = sizeof(sin6); + break; + } + + if (args->has_grp) + sd = msock_client(args); + else + sd = connectsock(addr, alen, args); + + if (sd < 0) + return -sd; + + if (args->bind_test_only) + goto out; + + if (args->type == SOCK_STREAM) { + rc = show_sockstat(sd, args); + if (rc != 0) + goto out; + } + + rc = msg_loop(1, sd, addr, alen, args); + +out: + close(sd); + + return rc; +} + +enum addr_type { + ADDR_TYPE_LOCAL, + ADDR_TYPE_REMOTE, + ADDR_TYPE_MCAST, + ADDR_TYPE_EXPECTED_LOCAL, + ADDR_TYPE_EXPECTED_REMOTE, +}; + +static int convert_addr(struct sock_args *args, const char *_str, + enum addr_type atype) +{ + int family = args->version; + struct in6_addr *in6; + struct in_addr *in; + const char *desc; + char *str, *dev; + void *addr; + int rc = 0; + + str = strdup(_str); + if (!str) + return -ENOMEM; + + switch (atype) { + case ADDR_TYPE_LOCAL: + desc = "local"; + addr = &args->local_addr; + break; + case ADDR_TYPE_REMOTE: + desc = "remote"; + addr = &args->remote_addr; + break; + case ADDR_TYPE_MCAST: + desc = "mcast grp"; + addr = &args->grp; + break; + case ADDR_TYPE_EXPECTED_LOCAL: + desc = "expected local"; + addr = &args->expected_laddr; + break; + case ADDR_TYPE_EXPECTED_REMOTE: + desc = "expected remote"; + addr = &args->expected_raddr; + break; + default: + log_error("unknown address type"); + exit(1); + } + + switch (family) { + case AF_INET: + in = (struct in_addr *) addr; + if (str) { + if (inet_pton(AF_INET, str, in) == 0) { + log_error("Invalid %s IP address\n", desc); + rc = -1; + goto out; + } + } else { + in->s_addr = htonl(INADDR_ANY); + } + break; + + case AF_INET6: + dev = strchr(str, '%'); + if (dev) { + *dev = '\0'; + dev++; + } + + in6 = (struct in6_addr *) addr; + if (str) { + if (inet_pton(AF_INET6, str, in6) == 0) { + log_error("Invalid %s IPv6 address\n", desc); + rc = -1; + goto out; + } + } else { + *in6 = in6addr_any; + } + if (dev) { + args->scope_id = get_ifidx(dev); + if (args->scope_id < 0) { + log_error("Invalid scope on %s IPv6 address\n", + desc); + rc = -1; + goto out; + } + } + break; + + default: + log_error("Invalid address family\n"); + } + +out: + free(str); + return rc; +} + +static char *random_msg(int len) +{ + int i, n = 0, olen = len + 1; + char *m; + + if (len <= 0) + return NULL; + + m = malloc(olen); + if (!m) + return NULL; + + while (len > 26) { + i = snprintf(m + n, olen - n, "%.26s", + "abcdefghijklmnopqrstuvwxyz"); + n += i; + len -= i; + } + i = snprintf(m + n, olen - n, "%.*s", len, + "abcdefghijklmnopqrstuvwxyz"); + return m; +} + +#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:d:SCi6L:0:1:2:Fbq" + +static void print_usage(char *prog) +{ + printf( + "usage: %s OPTS\n" + "Required:\n" + " -r addr remote address to connect to (client mode only)\n" + " -p port port to connect to (client mode)/listen on (server mode)\n" + " (default: %d)\n" + " -s server mode (default: client mode)\n" + " -t timeout seconds (default: none)\n" + "\n" + "Optional:\n" + " -F Restart server loop\n" + " -6 IPv6 (default is IPv4)\n" + " -P proto protocol for socket: icmp, ospf (default: none)\n" + " -D|R datagram (D) / raw (R) socket (default stream)\n" + " -l addr local address to bind to\n" + "\n" + " -d dev bind socket to given device name\n" + " -S use setsockopt (IP_UNICAST_IF or IP_MULTICAST_IF)\n" + " to set device binding\n" + " -C use cmsg and IP_PKTINFO to specify device binding\n" + "\n" + " -L len send random message of given length\n" + " -n num number of times to send message\n" + "\n" + " -M password use MD5 sum protection\n" + " -g grp multicast group (e.g., 239.1.1.1)\n" + " -i interactive mode (default is echo and terminate)\n" + "\n" + " -0 addr Expected local address\n" + " -1 addr Expected remote address\n" + " -2 dev Expected device name (or index) to receive packet\n" + "\n" + " -b Bind test only.\n" + " -q Be quiet. Run test without printing anything.\n" + , prog, DEFAULT_PORT); +} + +int main(int argc, char *argv[]) +{ + struct sock_args args = { + .version = AF_INET, + .type = SOCK_STREAM, + .port = DEFAULT_PORT, + }; + struct protoent *pe; + unsigned int tmp; + int forever = 0; + + /* process inputs */ + extern char *optarg; + int rc = 0; + + /* + * process input args + */ + + while ((rc = getopt(argc, argv, GETOPT_STR)) != -1) { + switch (rc) { + case 's': + server_mode = 1; + break; + case 'F': + forever = 1; + break; + case 'l': + args.has_local_ip = 1; + if (convert_addr(&args, optarg, ADDR_TYPE_LOCAL) < 0) + return 1; + break; + case 'r': + args.has_remote_ip = 1; + if (convert_addr(&args, optarg, ADDR_TYPE_REMOTE) < 0) + return 1; + break; + case 'p': + if (str_to_uint(optarg, 1, 65535, &tmp) != 0) { + fprintf(stderr, "Invalid port\n"); + return 1; + } + args.port = (unsigned short) tmp; + break; + case 't': + if (str_to_uint(optarg, 0, INT_MAX, + &prog_timeout) != 0) { + fprintf(stderr, "Invalid timeout\n"); + return 1; + } + break; + case 'D': + args.type = SOCK_DGRAM; + break; + case 'R': + args.type = SOCK_RAW; + args.port = 0; + break; + case 'P': + pe = getprotobyname(optarg); + if (pe) { + args.protocol = pe->p_proto; + } else { + if (str_to_uint(optarg, 0, 0xffff, &tmp) != 0) { + fprintf(stderr, "Invalid protocol\n"); + return 1; + } + args.protocol = tmp; + } + break; + case 'n': + iter = atoi(optarg); + break; + case 'L': + msg = random_msg(atoi(optarg)); + break; + case 'M': + args.password = optarg; + break; + case 'S': + args.use_setsockopt = 1; + break; + case 'C': + args.use_cmsg = 1; + break; + case 'd': + args.dev = optarg; + args.ifindex = get_ifidx(optarg); + if (args.ifindex < 0) { + fprintf(stderr, "Invalid device name\n"); + return 1; + } + break; + case 'i': + interactive = 1; + break; + case 'g': + args.has_grp = 1; + if (convert_addr(&args, optarg, ADDR_TYPE_MCAST) < 0) + return 1; + args.type = SOCK_DGRAM; + break; + case '6': + args.version = AF_INET6; + break; + case 'b': + args.bind_test_only = 1; + break; + case '0': + args.has_expected_laddr = 1; + if (convert_addr(&args, optarg, + ADDR_TYPE_EXPECTED_LOCAL)) + return 1; + break; + case '1': + args.has_expected_raddr = 1; + if (convert_addr(&args, optarg, + ADDR_TYPE_EXPECTED_REMOTE)) + return 1; + + break; + case '2': + if (str_to_uint(optarg, 0, INT_MAX, &tmp) == 0) { + args.expected_ifindex = (int)tmp; + } else { + args.expected_ifindex = get_ifidx(optarg); + if (args.expected_ifindex < 0) { + fprintf(stderr, + "Invalid expected device\n"); + return 1; + } + } + break; + case 'q': + quiet = 1; + break; + default: + print_usage(argv[0]); + return 1; + } + } + + if (args.password && + (!args.has_remote_ip || args.type != SOCK_STREAM)) { + log_error("MD5 passwords apply to TCP only and require a remote ip for the password\n"); + return 1; + } + + if ((args.use_setsockopt || args.use_cmsg) && !args.ifindex) { + fprintf(stderr, "Device binding not specified\n"); + return 1; + } + if (args.use_setsockopt || args.use_cmsg) + args.dev = NULL; + + if (iter == 0) { + fprintf(stderr, "Invalid number of messages to send\n"); + return 1; + } + + if (args.type == SOCK_STREAM && !args.protocol) + args.protocol = IPPROTO_TCP; + if (args.type == SOCK_DGRAM && !args.protocol) + args.protocol = IPPROTO_UDP; + + if ((args.type == SOCK_STREAM || args.type == SOCK_DGRAM) && + args.port == 0) { + fprintf(stderr, "Invalid port number\n"); + return 1; + } + + if (!server_mode && !args.has_grp && + !args.has_remote_ip && !args.has_local_ip) { + fprintf(stderr, + "Local (server mode) or remote IP (client IP) required\n"); + return 1; + } + + if (interactive) { + prog_timeout = 0; + msg = NULL; + } + + if (server_mode) { + do { + rc = do_server(&args); + } while (forever); + + return rc; + } + return do_client(&args); +} |