diff options
Diffstat (limited to 'sound')
-rw-r--r-- | sound/soc/jz4740/Kconfig | 25 | ||||
-rw-r--r-- | sound/soc/jz4740/Makefile | 5 | ||||
-rw-r--r-- | sound/soc/jz4740/qi_lb60.c | 106 |
3 files changed, 2 insertions, 134 deletions
diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index 6b757168693e..e72f826062e9 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -1,30 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only -config SND_JZ4740_SOC - tristate "SoC Audio for Ingenic JZ4740 SoC" - depends on MIPS || COMPILE_TEST - select SND_SOC_GENERIC_DMAENGINE_PCM - help - Say Y or M if you want to add support for codecs attached to - the JZ4740 I2S interface. You will also need to select the audio - interfaces to support below. - -if SND_JZ4740_SOC - config SND_JZ4740_SOC_I2S tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC" + depends on MIPS || COMPILE_TEST depends on HAS_IOMEM + select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740 based boards. - -config SND_JZ4740_SOC_QI_LB60 - tristate "SoC Audio support for Qi LB60" - depends on HAS_IOMEM - depends on JZ4740_QI_LB60 || COMPILE_TEST - select SND_JZ4740_SOC_I2S - select SND_SOC_JZ4740_CODEC - help - Say Y if you want to add support for ASoC audio on the Qi LB60 board - a.k.a Qi Ben NanoNote. - -endif diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile index fb10e9ad9ff7..f8701c9b09fe 100644 --- a/sound/soc/jz4740/Makefile +++ b/sound/soc/jz4740/Makefile @@ -5,8 +5,3 @@ snd-soc-jz4740-i2s-objs := jz4740-i2s.o obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o - -# Jz4740 Machine Support -snd-soc-qi-lb60-objs := qi_lb60.o - -obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c deleted file mode 100644 index 8ef6f41dcfbe..000000000000 --- a/sound/soc/jz4740/qi_lb60.c +++ /dev/null @@ -1,106 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <linux/gpio/consumer.h> - -struct qi_lb60 { - struct gpio_desc *snd_gpio; - struct gpio_desc *amp_gpio; -}; - -static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget, - struct snd_kcontrol *ctrl, int event) -{ - struct qi_lb60 *qi_lb60 = snd_soc_card_get_drvdata(widget->dapm->card); - int on = !SND_SOC_DAPM_EVENT_OFF(event); - - gpiod_set_value_cansleep(qi_lb60->snd_gpio, on); - gpiod_set_value_cansleep(qi_lb60->amp_gpio, on); - - return 0; -} - -static const struct snd_soc_dapm_widget qi_lb60_widgets[] = { - SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event), - SND_SOC_DAPM_MIC("Mic", NULL), -}; - -static const struct snd_soc_dapm_route qi_lb60_routes[] = { - {"Mic", NULL, "MIC"}, - {"Speaker", NULL, "LOUT"}, - {"Speaker", NULL, "ROUT"}, -}; - -SND_SOC_DAILINK_DEFS(hifi, - DAILINK_COMP_ARRAY(COMP_CPU("jz4740-i2s")), - DAILINK_COMP_ARRAY(COMP_CODEC("jz4740-codec", "jz4740-hifi")), - DAILINK_COMP_ARRAY(COMP_PLATFORM("jz4740-i2s"))); - -static struct snd_soc_dai_link qi_lb60_dai = { - .name = "jz4740", - .stream_name = "jz4740", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM, - SND_SOC_DAILINK_REG(hifi), -}; - -static struct snd_soc_card qi_lb60_card = { - .name = "QI LB60", - .owner = THIS_MODULE, - .dai_link = &qi_lb60_dai, - .num_links = 1, - - .dapm_widgets = qi_lb60_widgets, - .num_dapm_widgets = ARRAY_SIZE(qi_lb60_widgets), - .dapm_routes = qi_lb60_routes, - .num_dapm_routes = ARRAY_SIZE(qi_lb60_routes), - .fully_routed = true, -}; - -static int qi_lb60_probe(struct platform_device *pdev) -{ - struct qi_lb60 *qi_lb60; - struct snd_soc_card *card = &qi_lb60_card; - - qi_lb60 = devm_kzalloc(&pdev->dev, sizeof(*qi_lb60), GFP_KERNEL); - if (!qi_lb60) - return -ENOMEM; - - qi_lb60->snd_gpio = devm_gpiod_get(&pdev->dev, "snd", GPIOD_OUT_LOW); - if (IS_ERR(qi_lb60->snd_gpio)) - return PTR_ERR(qi_lb60->snd_gpio); - - qi_lb60->amp_gpio = devm_gpiod_get(&pdev->dev, "amp", GPIOD_OUT_LOW); - if (IS_ERR(qi_lb60->amp_gpio)) - return PTR_ERR(qi_lb60->amp_gpio); - - card->dev = &pdev->dev; - - snd_soc_card_set_drvdata(card, qi_lb60); - - return devm_snd_soc_register_card(&pdev->dev, card); -} - -static struct platform_driver qi_lb60_driver = { - .driver = { - .name = "qi-lb60-audio", - }, - .probe = qi_lb60_probe, -}; - -module_platform_driver(qi_lb60_driver); - -MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); -MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:qi-lb60-audio"); |