10 files changed, 252 insertions, 192 deletions

diff --git a/sound/soc/codecs/rt5677-spi.c b/sound/soc/codecs/rt5677-spi.c
index ef6348cb9157..3505aafbade4 100644
--- a/sound/soc/codecs/rt5677-spi.c
+++ b/sound/soc/codecs/rt5677-spi.c
@@ -31,84 +31,197 @@
 
 #include "rt5677-spi.h"
 
+#define RT5677_SPI_BURST_LEN	240
+#define RT5677_SPI_HEADER	5
+#define RT5677_SPI_FREQ		6000000
+
+/* The AddressPhase and DataPhase of SPI commands are MSB first on the wire.
+ * DataPhase word size of 16-bit commands is 2 bytes.
+ * DataPhase word size of 32-bit commands is 4 bytes.
+ * DataPhase word size of burst commands is 8 bytes.
+ * The DSP CPU is little-endian.
+ */
+#define RT5677_SPI_WRITE_BURST	0x5
+#define RT5677_SPI_READ_BURST	0x4
+#define RT5677_SPI_WRITE_32	0x3
+#define RT5677_SPI_READ_32	0x2
+#define RT5677_SPI_WRITE_16	0x1
+#define RT5677_SPI_READ_16	0x0
+
 static struct spi_device *g_spi;
+static DEFINE_MUTEX(spi_mutex);
 
-/**
- * rt5677_spi_write - Write data to SPI.
- * @txbuf: Data Buffer for writing.
- * @len: Data length.
+/* Select a suitable transfer command for the next transfer to ensure
+ * the transfer address is always naturally aligned while minimizing
+ * the total number of transfers required.
+ *
+ * 3 transfer commands are available:
+ * RT5677_SPI_READ/WRITE_16:	Transfer 2 bytes
+ * RT5677_SPI_READ/WRITE_32:	Transfer 4 bytes
+ * RT5677_SPI_READ/WRITE_BURST:	Transfer any multiples of 8 bytes
+ *
+ * For example, reading 260 bytes at 0x60030002 uses the following commands:
+ * 0x60030002 RT5677_SPI_READ_16	2 bytes
+ * 0x60030004 RT5677_SPI_READ_32	4 bytes
+ * 0x60030008 RT5677_SPI_READ_BURST	240 bytes
+ * 0x600300F8 RT5677_SPI_READ_BURST	8 bytes
+ * 0x60030100 RT5677_SPI_READ_32	4 bytes
+ * 0x60030104 RT5677_SPI_READ_16	2 bytes
  *
+ * Input:
+ * @read: true for read commands; false for write commands
+ * @align: alignment of the next transfer address
+ * @remain: number of bytes remaining to transfer
  *
- * Returns true for success.
+ * Output:
+ * @len: number of bytes to transfer with the selected command
+ * Returns the selected command
  */
-int rt5677_spi_write(u8 *txbuf, size_t len)
+static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len)
 {
-	int status;
-
-	status = spi_write(g_spi, txbuf, len);
-
-	if (status)
-		dev_err(&g_spi->dev, "rt5677_spi_write error %d\n", status);
-
-	return status;
+	u8 cmd;
+
+	if (align == 2 || align == 6 || remain == 2) {
+		cmd = RT5677_SPI_READ_16;
+		*len = 2;
+	} else if (align == 4 || remain <= 6) {
+		cmd = RT5677_SPI_READ_32;
+		*len = 4;
+	} else {
+		cmd = RT5677_SPI_READ_BURST;
+		*len = min_t(u32, remain & ~7, RT5677_SPI_BURST_LEN);
+	}
+	return read ? cmd : cmd + 1;
 }
-EXPORT_SYMBOL_GPL(rt5677_spi_write);
 
-/**
- * rt5677_spi_burst_write - Write data to SPI by rt5677 dsp memory address.
- * @addr: Start address.
- * @txbuf: Data Buffer for writng.
- * @len: Data length, it must be a multiple of 8.
- *
- *
- * Returns true for success.
+/* Copy dstlen bytes from src to dst, while reversing byte order for each word.
+ * If srclen < dstlen, zeros are padded.
  */
-int rt5677_spi_burst_write(u32 addr, const struct firmware *fw)
+static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen)
 {
-	u8 spi_cmd = RT5677_SPI_CMD_BURST_WRITE;
-	u8 *write_buf;
-	unsigned int i, end, offset = 0;
-
-	write_buf = kmalloc(RT5677_SPI_BUF_LEN + 6, GFP_KERNEL);
-
-	if (write_buf == NULL)
-		return -ENOMEM;
-
-	while (offset < fw->size) {
-		if (offset + RT5677_SPI_BUF_LEN <= fw->size)
-			end = RT5677_SPI_BUF_LEN;
-		else
-			end = fw->size % RT5677_SPI_BUF_LEN;
-
-		write_buf[0] = spi_cmd;
-		write_buf[1] = ((addr + offset) & 0xff000000) >> 24;
-		write_buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
-		write_buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
-		write_buf[4] = ((addr + offset) & 0x000000ff) >> 0;
-
-		for (i = 0; i < end; i += 8) {
-			write_buf[i + 12] = fw->data[offset + i + 0];
-			write_buf[i + 11] = fw->data[offset + i + 1];
-			write_buf[i + 10] = fw->data[offset + i + 2];
-			write_buf[i +  9] = fw->data[offset + i + 3];
-			write_buf[i +  8] = fw->data[offset + i + 4];
-			write_buf[i +  7] = fw->data[offset + i + 5];
-			write_buf[i +  6] = fw->data[offset + i + 6];
-			write_buf[i +  5] = fw->data[offset + i + 7];
+	u32 w, i, si;
+	u32 word_size = min_t(u32, dstlen, 8);
+
+	for (w = 0; w < dstlen; w += word_size) {
+		for (i = 0; i < word_size; i++) {
+			si = w + word_size - i - 1;
+			dst[w + i] = si < srclen ? src[si] : 0;
 		}
+	}
+}
 
-		write_buf[end + 5] = spi_cmd;
+/* Read DSP address space using SPI. addr and len have to be 2-byte aligned. */
+int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
+{
+	u32 offset;
+	int status = 0;
+	struct spi_transfer t[2];
+	struct spi_message m;
+	/* +4 bytes is for the DummyPhase following the AddressPhase */
+	u8 header[RT5677_SPI_HEADER + 4];
+	u8 body[RT5677_SPI_BURST_LEN];
+	u8 spi_cmd;
+	u8 *cb = rxbuf;
+
+	if (!g_spi)
+		return -ENODEV;
+
+	if ((addr & 1) || (len & 1)) {
+		dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len);
+		return -EACCES;
+	}
 
-		rt5677_spi_write(write_buf, end + 6);
+	memset(t, 0, sizeof(t));
+	t[0].tx_buf = header;
+	t[0].len = sizeof(header);
+	t[0].speed_hz = RT5677_SPI_FREQ;
+	t[1].rx_buf = body;
+	t[1].speed_hz = RT5677_SPI_FREQ;
+	spi_message_init_with_transfers(&m, t, ARRAY_SIZE(t));
+
+	for (offset = 0; offset < len; offset += t[1].len) {
+		spi_cmd = rt5677_spi_select_cmd(true, (addr + offset) & 7,
+				len - offset, &t[1].len);
+
+		/* Construct SPI message header */
+		header[0] = spi_cmd;
+		header[1] = ((addr + offset) & 0xff000000) >> 24;
+		header[2] = ((addr + offset) & 0x00ff0000) >> 16;
+		header[3] = ((addr + offset) & 0x0000ff00) >> 8;
+		header[4] = ((addr + offset) & 0x000000ff) >> 0;
+
+		mutex_lock(&spi_mutex);
+		status |= spi_sync(g_spi, &m);
+		mutex_unlock(&spi_mutex);
+
+		/* Copy data back to caller buffer */
+		rt5677_spi_reverse(cb + offset, t[1].len, body, t[1].len);
+	}
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_read);
 
-		offset += RT5677_SPI_BUF_LEN;
+/* Write DSP address space using SPI. addr has to be 2-byte aligned.
+ * If len is not 2-byte aligned, an extra byte of zero is written at the end
+ * as padding.
+ */
+int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
+{
+	u32 offset, len_with_pad = len;
+	int status = 0;
+	struct spi_transfer t;
+	struct spi_message m;
+	/* +1 byte is for the DummyPhase following the DataPhase */
+	u8 buf[RT5677_SPI_HEADER + RT5677_SPI_BURST_LEN + 1];
+	u8 *body = buf + RT5677_SPI_HEADER;
+	u8 spi_cmd;
+	const u8 *cb = txbuf;
+
+	if (!g_spi)
+		return -ENODEV;
+
+	if (addr & 1) {
+		dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len);
+		return -EACCES;
 	}
 
-	kfree(write_buf);
+	if (len & 1)
+		len_with_pad = len + 1;
+
+	memset(&t, 0, sizeof(t));
+	t.tx_buf = buf;
+	t.speed_hz = RT5677_SPI_FREQ;
+	spi_message_init_with_transfers(&m, &t, 1);
+
+	for (offset = 0; offset < len_with_pad;) {
+		spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7,
+				len_with_pad - offset, &t.len);
+
+		/* Construct SPI message header */
+		buf[0] = spi_cmd;
+		buf[1] = ((addr + offset) & 0xff000000) >> 24;
+		buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
+		buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
+		buf[4] = ((addr + offset) & 0x000000ff) >> 0;
+
+		/* Fetch data from caller buffer */
+		rt5677_spi_reverse(body, t.len, cb + offset, len - offset);
+		offset += t.len;
+		t.len += RT5677_SPI_HEADER + 1;
+
+		mutex_lock(&spi_mutex);
+		status |= spi_sync(g_spi, &m);
+		mutex_unlock(&spi_mutex);
+	}
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_write);
 
-	return 0;
+int rt5677_spi_write_firmware(u32 addr, const struct firmware *fw)
+{
+	return rt5677_spi_write(addr, fw->data, fw->size);
 }
-EXPORT_SYMBOL_GPL(rt5677_spi_burst_write);
+EXPORT_SYMBOL_GPL(rt5677_spi_write_firmware);
 
 static int rt5677_spi_probe(struct spi_device *spi)
 {
diff --git a/sound/soc/codecs/rt5677-spi.h b/sound/soc/codecs/rt5677-spi.h
index ec41b2b3b2ca..662db16cfb6a 100644
--- a/sound/soc/codecs/rt5677-spi.h
+++ b/sound/soc/codecs/rt5677-spi.h
@@ -12,10 +12,8 @@
 #ifndef __RT5677_SPI_H__
 #define __RT5677_SPI_H__
 
-#define RT5677_SPI_BUF_LEN 240
-#define RT5677_SPI_CMD_BURST_WRITE 0x05
-
-int rt5677_spi_write(u8 *txbuf, size_t len);
-int rt5677_spi_burst_write(u32 addr, const struct firmware *fw);
+int rt5677_spi_read(u32 addr, void *rxbuf, size_t len);
+int rt5677_spi_write(u32 addr, const void *txbuf, size_t len);
+int rt5677_spi_write_firmware(u32 addr, const struct firmware *fw);
 
 #endif /* __RT5677_SPI_H__ */
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index d9999336a7a2..b7de51b09c35 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -15,13 +15,12 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
-#include <linux/of_gpio.h>
 #include <linux/regmap.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/firmware.h>
-#include <linux/gpio.h>
+#include <linux/property.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -746,14 +745,14 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on)
 		ret = request_firmware(&rt5677->fw1, RT5677_FIRMWARE1,
 			codec->dev);
 		if (ret == 0) {
-			rt5677_spi_burst_write(0x50000000, rt5677->fw1);
+			rt5677_spi_write_firmware(0x50000000, rt5677->fw1);
 			release_firmware(rt5677->fw1);
 		}
 
 		ret = request_firmware(&rt5677->fw2, RT5677_FIRMWARE2,
 			codec->dev);
 		if (ret == 0) {
-			rt5677_spi_burst_write(0x60000000, rt5677->fw2);
+			rt5677_spi_write_firmware(0x60000000, rt5677->fw2);
 			release_firmware(rt5677->fw2);
 		}
 
@@ -4767,10 +4766,8 @@ static int rt5677_remove(struct snd_soc_codec *codec)
 	struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
 
 	regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec);
-	if (gpio_is_valid(rt5677->pow_ldo2))
-		gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
-	if (gpio_is_valid(rt5677->reset_pin))
-		gpio_set_value_cansleep(rt5677->reset_pin, 0);
+	gpiod_set_value_cansleep(rt5677->pow_ldo2, 0);
+	gpiod_set_value_cansleep(rt5677->reset_pin, 0);
 
 	return 0;
 }
@@ -4784,10 +4781,8 @@ static int rt5677_suspend(struct snd_soc_codec *codec)
 		regcache_cache_only(rt5677->regmap, true);
 		regcache_mark_dirty(rt5677->regmap);
 
-		if (gpio_is_valid(rt5677->pow_ldo2))
-			gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
-		if (gpio_is_valid(rt5677->reset_pin))
-			gpio_set_value_cansleep(rt5677->reset_pin, 0);
+		gpiod_set_value_cansleep(rt5677->pow_ldo2, 0);
+		gpiod_set_value_cansleep(rt5677->reset_pin, 0);
 	}
 
 	return 0;
@@ -4798,12 +4793,9 @@ static int rt5677_resume(struct snd_soc_codec *codec)
 	struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
 
 	if (!rt5677->dsp_vad_en) {
-		if (gpio_is_valid(rt5677->pow_ldo2))
-			gpio_set_value_cansleep(rt5677->pow_ldo2, 1);
-		if (gpio_is_valid(rt5677->reset_pin))
-			gpio_set_value_cansleep(rt5677->reset_pin, 1);
-		if (gpio_is_valid(rt5677->pow_ldo2) ||
-		    gpio_is_valid(rt5677->reset_pin))
+		gpiod_set_value_cansleep(rt5677->pow_ldo2, 1);
+		gpiod_set_value_cansleep(rt5677->reset_pin, 1);
+		if (rt5677->pow_ldo2 || rt5677->reset_pin)
 			msleep(10);
 
 		regcache_cache_only(rt5677->regmap, false);
@@ -5027,45 +5019,29 @@ static const struct i2c_device_id rt5677_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id);
 
-static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np)
+static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
+		struct device *dev)
 {
-	rt5677->pdata.in1_diff = of_property_read_bool(np,
-					"realtek,in1-differential");
-	rt5677->pdata.in2_diff = of_property_read_bool(np,
-					"realtek,in2-differential");
-	rt5677->pdata.lout1_diff = of_property_read_bool(np,
-					"realtek,lout1-differential");
-	rt5677->pdata.lout2_diff = of_property_read_bool(np,
-					"realtek,lout2-differential");
-	rt5677->pdata.lout3_diff = of_property_read_bool(np,
-					"realtek,lout3-differential");
-
-	rt5677->pow_ldo2 = of_get_named_gpio(np,
-					"realtek,pow-ldo2-gpio", 0);
-	rt5677->reset_pin = of_get_named_gpio(np,
-					"realtek,reset-gpio", 0);
-
-	/*
-	 * POW_LDO2 is optional (it may be statically tied on the board).
-	 * -ENOENT means that the property doesn't exist, i.e. there is no
-	 * GPIO, so is not an error. Any other error code means the property
-	 * exists, but could not be parsed.
-	 */
-	if (!gpio_is_valid(rt5677->pow_ldo2) &&
-			(rt5677->pow_ldo2 != -ENOENT))
-		return rt5677->pow_ldo2;
-	if (!gpio_is_valid(rt5677->reset_pin) &&
-			(rt5677->reset_pin != -ENOENT))
-		return rt5677->reset_pin;
-
-	of_property_read_u8_array(np, "realtek,gpio-config",
-		rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
-
-	of_property_read_u32(np, "realtek,jd1-gpio", &rt5677->pdata.jd1_gpio);
-	of_property_read_u32(np, "realtek,jd2-gpio", &rt5677->pdata.jd2_gpio);
-	of_property_read_u32(np, "realtek,jd3-gpio", &rt5677->pdata.jd3_gpio);
-
-	return 0;
+	rt5677->pdata.in1_diff = device_property_read_bool(dev,
+			"realtek,in1-differential");
+	rt5677->pdata.in2_diff = device_property_read_bool(dev,
+			"realtek,in2-differential");
+	rt5677->pdata.lout1_diff = device_property_read_bool(dev,
+			"realtek,lout1-differential");
+	rt5677->pdata.lout2_diff = device_property_read_bool(dev,
+			"realtek,lout2-differential");
+	rt5677->pdata.lout3_diff = device_property_read_bool(dev,
+			"realtek,lout3-differential");
+
+	device_property_read_u8_array(dev, "realtek,gpio-config",
+			rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
+
+	device_property_read_u32(dev, "realtek,jd1-gpio",
+			&rt5677->pdata.jd1_gpio);
+	device_property_read_u32(dev, "realtek,jd2-gpio",
+			&rt5677->pdata.jd2_gpio);
+	device_property_read_u32(dev, "realtek,jd3-gpio",
+			&rt5677->pdata.jd3_gpio);
 }
 
 static struct regmap_irq rt5677_irqs[] = {
@@ -5148,43 +5124,29 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
 
 	if (pdata)
 		rt5677->pdata = *pdata;
+	else
+		rt5677_read_device_properties(rt5677, &i2c->dev);
 
-	if (i2c->dev.of_node) {
-		ret = rt5677_parse_dt(rt5677, i2c->dev.of_node);
-		if (ret) {
-			dev_err(&i2c->dev, "Failed to parse device tree: %d\n",
-				ret);
-			return ret;
-		}
-	} else {
-		rt5677->pow_ldo2 = -EINVAL;
-		rt5677->reset_pin = -EINVAL;
-	}
-
-	if (gpio_is_valid(rt5677->pow_ldo2)) {
-		ret = devm_gpio_request_one(&i2c->dev, rt5677->pow_ldo2,
-					    GPIOF_OUT_INIT_HIGH,
-					    "RT5677 POW_LDO2");
-		if (ret < 0) {
-			dev_err(&i2c->dev, "Failed to request POW_LDO2 %d: %d\n",
-				rt5677->pow_ldo2, ret);
-			return ret;
-		}
+	/* pow-ldo2 and reset are optional. The codec pins may be statically
+	 * connected on the board without gpios. If the gpio device property
+	 * isn't specified, devm_gpiod_get_optional returns NULL.
+	 */
+	rt5677->pow_ldo2 = devm_gpiod_get_optional(&i2c->dev,
+			"realtek,pow-ldo2", GPIOD_OUT_HIGH);
+	if (IS_ERR(rt5677->pow_ldo2)) {
+		ret = PTR_ERR(rt5677->pow_ldo2);
+		dev_err(&i2c->dev, "Failed to request POW_LDO2: %d\n", ret);
+		return ret;
 	}
-
-	if (gpio_is_valid(rt5677->reset_pin)) {
-		ret = devm_gpio_request_one(&i2c->dev, rt5677->reset_pin,
-					    GPIOF_OUT_INIT_HIGH,
-					    "RT5677 RESET");
-		if (ret < 0) {
-			dev_err(&i2c->dev, "Failed to request RESET %d: %d\n",
-				rt5677->reset_pin, ret);
-			return ret;
-		}
+	rt5677->reset_pin = devm_gpiod_get_optional(&i2c->dev,
+			"realtek,reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(rt5677->reset_pin)) {
+		ret = PTR_ERR(rt5677->reset_pin);
+		dev_err(&i2c->dev, "Failed to request RESET: %d\n", ret);
+		return ret;
 	}
 
-	if (gpio_is_valid(rt5677->pow_ldo2) ||
-	    gpio_is_valid(rt5677->reset_pin)) {
+	if (rt5677->pow_ldo2 || rt5677->reset_pin) {
 		/* Wait a while until I2C bus becomes available. The datasheet
 		 * does not specify the exact we should wait but startup
 		 * sequence mentiones at least a few milliseconds.
@@ -5212,7 +5174,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
 	regmap_read(rt5677->regmap, RT5677_VENDOR_ID2, &val);
 	if (val != RT5677_DEVICE_ID) {
 		dev_err(&i2c->dev,
-			"Device with ID register %x is not rt5677\n", val);
+			"Device with ID register %#x is not rt5677\n", val);
 		return -ENODEV;
 	}
 
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h
index 7eca38a23255..d46855a42c40 100644
--- a/sound/soc/codecs/rt5677.h
+++ b/sound/soc/codecs/rt5677.h
@@ -14,6 +14,7 @@
 
 #include <sound/rt5677.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
 
 /* Info */
 #define RT5677_RESET				0x00
@@ -1775,8 +1776,8 @@ struct rt5677_priv {
 	int pll_src;
 	int pll_in;
 	int pll_out;
-	int pow_ldo2; /* POW_LDO2 pin */
-	int reset_pin; /* RESET pin */
+	struct gpio_desc *pow_ldo2; /* POW_LDO2 pin */
+	struct gpio_desc *reset_pin; /* RESET pin */
 	enum rt5677_type type;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip gpio_chip;
diff --git a/sound/soc/codecs/sirf-audio-codec.c b/sound/soc/codecs/sirf-audio-codec.c
index 29cb44256044..6bfd25c289d1 100644
--- a/sound/soc/codecs/sirf-audio-codec.c
+++ b/sound/soc/codecs/sirf-audio-codec.c
@@ -370,11 +370,11 @@ static int sirf_audio_codec_trigger(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-struct snd_soc_dai_ops sirf_audio_codec_dai_ops = {
+static const struct snd_soc_dai_ops sirf_audio_codec_dai_ops = {
 	.trigger = sirf_audio_codec_trigger,
 };
 
-struct snd_soc_dai_driver sirf_audio_codec_dai = {
+static struct snd_soc_dai_driver sirf_audio_codec_dai = {
 	.name = "sirf-audio-codec",
 	.playback = {
 		.stream_name = "Playback",
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index d5554939146e..3ff76d419436 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -76,6 +76,7 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct simple_card_data *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct simple_dai_props *dai_props =
 		&priv->dai_props[rtd - rtd->card->rtd];
@@ -91,8 +92,16 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream,
 		mclk = params_rate(params) * mclk_fs;
 		ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk,
 					     SND_SOC_CLOCK_IN);
+		if (ret && ret != -ENOTSUPP)
+			goto err;
+
+		ret = snd_soc_dai_set_sysclk(cpu_dai, 0, mclk,
+					     SND_SOC_CLOCK_OUT);
+		if (ret && ret != -ENOTSUPP)
+			goto err;
 	}
 
+err:
 	return ret;
 }
 
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
index fd11404a3bc7..8fad4441c87d 100644
--- a/sound/soc/sh/dma-sh7760.c
+++ b/sound/soc/sh/dma-sh7760.c
@@ -327,13 +327,7 @@ static struct snd_soc_platform_driver sh7760_soc_platform = {
 
 static int sh7760_soc_platform_probe(struct platform_device *pdev)
 {
-	return snd_soc_register_platform(&pdev->dev, &sh7760_soc_platform);
-}
-
-static int sh7760_soc_platform_remove(struct platform_device *pdev)
-{
-	snd_soc_unregister_platform(&pdev->dev);
-	return 0;
+	return devm_snd_soc_register_platform(&pdev->dev, &sh7760_soc_platform);
 }
 
 static struct platform_driver sh7760_pcm_driver = {
@@ -342,7 +336,6 @@ static struct platform_driver sh7760_pcm_driver = {
 	},
 
 	.probe = sh7760_soc_platform_probe,
-	.remove = sh7760_soc_platform_remove,
 };
 
 module_platform_driver(sh7760_pcm_driver);
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
index ab13146e4f82..89ed1b107ac5 100644
--- a/sound/soc/sh/ssi.c
+++ b/sound/soc/sh/ssi.c
@@ -385,14 +385,9 @@ static const struct snd_soc_component_driver sh4_ssi_component = {
 
 static int sh4_soc_dai_probe(struct platform_device *pdev)
 {
-	return snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
-					  sh4_ssi_dai, ARRAY_SIZE(sh4_ssi_dai));
-}
-
-static int sh4_soc_dai_remove(struct platform_device *pdev)
-{
-	snd_soc_unregister_component(&pdev->dev);
-	return 0;
+	return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
+					       sh4_ssi_dai,
+					       ARRAY_SIZE(sh4_ssi_dai));
 }
 
 static struct platform_driver sh4_ssi_driver = {
@@ -401,7 +396,6 @@ static struct platform_driver sh4_ssi_driver = {
 	},
 
 	.probe = sh4_soc_dai_probe,
-	.remove = sh4_soc_dai_remove,
 };
 
 module_platform_driver(sh4_ssi_driver);
diff --git a/sound/soc/spear/spdif_in.c b/sound/soc/spear/spdif_in.c
index a4028601da01..977a078eb92f 100644
--- a/sound/soc/spear/spdif_in.c
+++ b/sound/soc/spear/spdif_in.c
@@ -203,35 +203,25 @@ static int spdif_in_probe(struct platform_device *pdev)
 	struct spdif_in_dev *host;
 	struct spear_spdif_platform_data *pdata;
 	struct resource *res, *res_fifo;
+	void __iomem *io_base;
 	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EINVAL;
+	io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
 
 	res_fifo = platform_get_resource(pdev, IORESOURCE_IO, 0);
 	if (!res_fifo)
 		return -EINVAL;
 
-	if (!devm_request_mem_region(&pdev->dev, res->start,
-				resource_size(res), pdev->name)) {
-		dev_warn(&pdev->dev, "Failed to get memory resourse\n");
-		return -ENOENT;
-	}
-
 	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
 	if (!host) {
 		dev_warn(&pdev->dev, "kzalloc fail\n");
 		return -ENOMEM;
 	}
 
-	host->io_base = devm_ioremap(&pdev->dev, res->start,
-				resource_size(res));
-	if (!host->io_base) {
-		dev_warn(&pdev->dev, "ioremap failed\n");
-		return -ENOMEM;
-	}
-
+	host->io_base = io_base;
 	host->irq = platform_get_irq(pdev, 0);
 	if (host->irq < 0)
 		return -EINVAL;
diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c
index a7dc3c56f44d..e8476da157cd 100644
--- a/sound/soc/spear/spear_pcm.c
+++ b/sound/soc/spear/spear_pcm.c
@@ -44,7 +44,7 @@ int devm_spear_pcm_platform_register(struct device *dev,
 	*config = spear_dmaengine_pcm_config;
 	config->compat_filter_fn = filter;
 
-	return snd_dmaengine_pcm_register(dev, config,
+	return devm_snd_dmaengine_pcm_register(dev, config,
 		SND_DMAENGINE_PCM_FLAG_NO_DT |
 		SND_DMAENGINE_PCM_FLAG_COMPAT);
 }