diff options
Diffstat (limited to 'sound/soc/fsl/fsl_ssi.c')
| -rw-r--r-- | sound/soc/fsl/fsl_ssi.c | 996 |
1 files changed, 362 insertions, 634 deletions
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 5428a1fda260..f233d915b7e4 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -35,11 +35,11 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/clk.h> -#include <linux/debugfs.h> #include <linux/device.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> @@ -113,8 +113,6 @@ static inline void write_ssi_mask(u32 __iomem *addr, u32 clear, u32 set) #define FSLSSI_SIER_DBG_TX_FLAGS (CCSR_SSI_SIER_TFE0_EN | \ CCSR_SSI_SIER_TLS_EN | CCSR_SSI_SIER_TFS_EN | \ CCSR_SSI_SIER_TUE0_EN | CCSR_SSI_SIER_TFRC_EN) -#define FSLSSI_SISR_MASK (FSLSSI_SIER_DBG_RX_FLAGS | FSLSSI_SIER_DBG_TX_FLAGS) - enum fsl_ssi_type { FSL_SSI_MCP8610, @@ -146,7 +144,6 @@ struct fsl_ssi_rxtx_reg_val { * @cpu_dai: the CPU DAI for this device * @dev_attr: the sysfs device attribute structure * @stats: SSI statistics - * @name: name for this device */ struct fsl_ssi_private { struct ccsr_ssi __iomem *ssi; @@ -155,15 +152,11 @@ struct fsl_ssi_private { unsigned int fifo_depth; struct snd_soc_dai_driver cpu_dai_drv; struct platform_device *pdev; + unsigned int dai_fmt; enum fsl_ssi_type hw_type; - bool new_binding; - bool ssi_on_imx; - bool imx_ac97; bool use_dma; bool baudclk_locked; - bool irq_stats; - bool offline_config; bool use_dual_fifo; u8 i2s_mode; spinlock_t baudclk_lock; @@ -171,39 +164,11 @@ struct fsl_ssi_private { struct clk *clk; struct snd_dmaengine_dai_dma_data dma_params_tx; struct snd_dmaengine_dai_dma_data dma_params_rx; - struct imx_dma_data filter_data_tx; - struct imx_dma_data filter_data_rx; struct imx_pcm_fiq_params fiq_params; /* Register values for rx/tx configuration */ struct fsl_ssi_rxtx_reg_val rxtx_reg_val; - struct { - unsigned int rfrc; - unsigned int tfrc; - unsigned int cmdau; - unsigned int cmddu; - unsigned int rxt; - unsigned int rdr1; - unsigned int rdr0; - unsigned int tde1; - unsigned int tde0; - unsigned int roe1; - unsigned int roe0; - unsigned int tue1; - unsigned int tue0; - unsigned int tfs; - unsigned int rfs; - unsigned int tls; - unsigned int rls; - unsigned int rff1; - unsigned int rff0; - unsigned int tfe1; - unsigned int tfe0; - } stats; - struct dentry *dbg_dir; - struct dentry *dbg_stats; - - char name[1]; + struct fsl_ssi_dbg dbg_stats; }; static const struct of_device_id fsl_ssi_ids[] = { @@ -215,6 +180,54 @@ static const struct of_device_id fsl_ssi_ids[] = { }; MODULE_DEVICE_TABLE(of, fsl_ssi_ids); +static bool fsl_ssi_is_ac97(struct fsl_ssi_private *ssi_private) +{ + return !!(ssi_private->dai_fmt & SND_SOC_DAIFMT_AC97); +} + +static bool fsl_ssi_on_imx(struct fsl_ssi_private *ssi_private) +{ + switch (ssi_private->hw_type) { + case FSL_SSI_MX21: + case FSL_SSI_MX35: + case FSL_SSI_MX51: + return true; + case FSL_SSI_MCP8610: + return false; + } + + return false; +} + +/* + * imx51 and later SoCs have a slightly different IP that allows the + * SSI configuration while the SSI unit is running. + * + * More important, it is necessary on those SoCs to configure the + * sperate TX/RX DMA bits just before starting the stream + * (fsl_ssi_trigger). The SDMA unit has to be configured before fsl_ssi + * sends any DMA requests to the SDMA unit, otherwise it is not defined + * how the SDMA unit handles the DMA request. + * + * SDMA units are present on devices starting at imx35 but the imx35 + * reference manual states that the DMA bits should not be changed + * while the SSI unit is running (SSIEN). So we support the necessary + * online configuration of fsl-ssi starting at imx51. + */ +static bool fsl_ssi_offline_config(struct fsl_ssi_private *ssi_private) +{ + switch (ssi_private->hw_type) { + case FSL_SSI_MCP8610: + case FSL_SSI_MX21: + case FSL_SSI_MX35: + return true; + case FSL_SSI_MX51: + return false; + } + + return true; +} + /** * fsl_ssi_isr: SSI interrupt handler * @@ -231,7 +244,6 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) { struct fsl_ssi_private *ssi_private = dev_id; struct ccsr_ssi __iomem *ssi = ssi_private->ssi; - irqreturn_t ret = IRQ_NONE; __be32 sisr; __be32 sisr2; __be32 sisr_write_mask = 0; @@ -258,217 +270,18 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) were interrupted for. We mask it with the Interrupt Enable register so that we only check for events that we're interested in. */ - sisr = read_ssi(&ssi->sisr) & FSLSSI_SISR_MASK; - - if (sisr & CCSR_SSI_SISR_RFRC) { - ssi_private->stats.rfrc++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TFRC) { - ssi_private->stats.tfrc++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_CMDAU) { - ssi_private->stats.cmdau++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_CMDDU) { - ssi_private->stats.cmddu++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_RXT) { - ssi_private->stats.rxt++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_RDR1) { - ssi_private->stats.rdr1++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_RDR0) { - ssi_private->stats.rdr0++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TDE1) { - ssi_private->stats.tde1++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TDE0) { - ssi_private->stats.tde0++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_ROE1) { - ssi_private->stats.roe1++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_ROE0) { - ssi_private->stats.roe0++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TUE1) { - ssi_private->stats.tue1++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TUE0) { - ssi_private->stats.tue0++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TFS) { - ssi_private->stats.tfs++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_RFS) { - ssi_private->stats.rfs++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TLS) { - ssi_private->stats.tls++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_RLS) { - ssi_private->stats.rls++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_RFF1) { - ssi_private->stats.rff1++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_RFF0) { - ssi_private->stats.rff0++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TFE1) { - ssi_private->stats.tfe1++; - ret = IRQ_HANDLED; - } - - if (sisr & CCSR_SSI_SISR_TFE0) { - ssi_private->stats.tfe0++; - ret = IRQ_HANDLED; - } + sisr = read_ssi(&ssi->sisr); sisr2 = sisr & sisr_write_mask; /* Clear the bits that we set */ if (sisr2) write_ssi(sisr2, &ssi->sisr); - return ret; -} - -#if IS_ENABLED(CONFIG_DEBUG_FS) -/* Show the statistics of a flag only if its interrupt is enabled. The - * compiler will optimze this code to a no-op if the interrupt is not - * enabled. - */ -#define SIER_SHOW(flag, name) \ - do { \ - if (FSLSSI_SISR_MASK & CCSR_SSI_SIER_##flag) \ - seq_printf(s, #name "=%u\n", ssi_private->stats.name); \ - } while (0) - - -/** - * fsl_sysfs_ssi_show: display SSI statistics - * - * Display the statistics for the current SSI device. To avoid confusion, - * we only show those counts that are enabled. - */ -static int fsl_ssi_stats_show(struct seq_file *s, void *unused) -{ - struct fsl_ssi_private *ssi_private = s->private; - - SIER_SHOW(RFRC_EN, rfrc); - SIER_SHOW(TFRC_EN, tfrc); - SIER_SHOW(CMDAU_EN, cmdau); - SIER_SHOW(CMDDU_EN, cmddu); - SIER_SHOW(RXT_EN, rxt); - SIER_SHOW(RDR1_EN, rdr1); - SIER_SHOW(RDR0_EN, rdr0); - SIER_SHOW(TDE1_EN, tde1); - SIER_SHOW(TDE0_EN, tde0); - SIER_SHOW(ROE1_EN, roe1); - SIER_SHOW(ROE0_EN, roe0); - SIER_SHOW(TUE1_EN, tue1); - SIER_SHOW(TUE0_EN, tue0); - SIER_SHOW(TFS_EN, tfs); - SIER_SHOW(RFS_EN, rfs); - SIER_SHOW(TLS_EN, tls); - SIER_SHOW(RLS_EN, rls); - SIER_SHOW(RFF1_EN, rff1); - SIER_SHOW(RFF0_EN, rff0); - SIER_SHOW(TFE1_EN, tfe1); - SIER_SHOW(TFE0_EN, tfe0); + fsl_ssi_dbg_isr(&ssi_private->dbg_stats, sisr); - return 0; + return IRQ_HANDLED; } -static int fsl_ssi_stats_open(struct inode *inode, struct file *file) -{ - return single_open(file, fsl_ssi_stats_show, inode->i_private); -} - -static const struct file_operations fsl_ssi_stats_ops = { - .open = fsl_ssi_stats_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int fsl_ssi_debugfs_create(struct fsl_ssi_private *ssi_private, - struct device *dev) -{ - ssi_private->dbg_dir = debugfs_create_dir(dev_name(dev), NULL); - if (!ssi_private->dbg_dir) - return -ENOMEM; - - ssi_private->dbg_stats = debugfs_create_file("stats", S_IRUGO, - ssi_private->dbg_dir, ssi_private, &fsl_ssi_stats_ops); - if (!ssi_private->dbg_stats) { - debugfs_remove(ssi_private->dbg_dir); - return -ENOMEM; - } - - return 0; -} - -static void fsl_ssi_debugfs_remove(struct fsl_ssi_private *ssi_private) -{ - debugfs_remove(ssi_private->dbg_stats); - debugfs_remove(ssi_private->dbg_dir); -} - -#else - -static int fsl_ssi_debugfs_create(struct fsl_ssi_private *ssi_private, - struct device *dev) -{ - return 0; -} - -static void fsl_ssi_debugfs_remove(struct fsl_ssi_private *ssi_private) -{ -} - -#endif /* IS_ENABLED(CONFIG_DEBUG_FS) */ - /* * Enable/Disable all rx/tx config flags at once. */ @@ -490,6 +303,26 @@ static void fsl_ssi_rxtx_config(struct fsl_ssi_private *ssi_private, } /* + * Calculate the bits that have to be disabled for the current stream that is + * getting disabled. This keeps the bits enabled that are necessary for the + * second stream to work if 'stream_active' is true. + * + * Detailed calculation: + * These are the values that need to be active after disabling. For non-active + * second stream, this is 0: + * vals_stream * !!stream_active + * + * The following computes the overall differences between the setup for the + * to-disable stream and the active stream, a simple XOR: + * vals_disable ^ (vals_stream * !!(stream_active)) + * + * The full expression adds a mask on all values we care about + */ +#define fsl_ssi_disable_val(vals_disable, vals_stream, stream_active) \ + ((vals_disable) & \ + ((vals_disable) ^ ((vals_stream) * (u32)!!(stream_active)))) + +/* * Enable/Disable a ssi configuration. You have to pass either * ssi_private->rxtx_reg_val.rx or tx as vals parameter. */ @@ -501,6 +334,12 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable, u32 scr_val = read_ssi(&ssi->scr); int nr_active_streams = !!(scr_val & CCSR_SSI_SCR_TE) + !!(scr_val & CCSR_SSI_SCR_RE); + int keep_active; + + if (nr_active_streams - 1 > 0) + keep_active = 1; + else + keep_active = 0; /* Find the other direction values rx or tx which we do not want to * modify */ @@ -511,7 +350,8 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable, /* If vals should be disabled, start with disabling the unit */ if (!enable) { - u32 scr = vals->scr & (vals->scr ^ avals->scr); + u32 scr = fsl_ssi_disable_val(vals->scr, avals->scr, + keep_active); write_ssi_mask(&ssi->scr, scr, 0); } @@ -520,9 +360,9 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable, * reconfiguration, so we have to enable all necessary flags at once * even if we do not use them later (capture and playback configuration) */ - if (ssi_private->offline_config) { + if (fsl_ssi_offline_config(ssi_private)) { if ((enable && !nr_active_streams) || - (!enable && nr_active_streams == 1)) + (!enable && !keep_active)) fsl_ssi_rxtx_config(ssi_private, enable); goto config_done; @@ -551,9 +391,12 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable, */ /* These assignments are simply vals without bits set in avals*/ - sier = vals->sier & (vals->sier ^ avals->sier); - srcr = vals->srcr & (vals->srcr ^ avals->srcr); - stcr = vals->stcr & (vals->stcr ^ avals->stcr); + sier = fsl_ssi_disable_val(vals->sier, avals->sier, + keep_active); + srcr = fsl_ssi_disable_val(vals->srcr, avals->srcr, + keep_active); + stcr = fsl_ssi_disable_val(vals->stcr, avals->stcr, + keep_active); write_ssi_mask(&ssi->srcr, srcr, 0); write_ssi_mask(&ssi->stcr, stcr, 0); @@ -593,7 +436,7 @@ static void fsl_ssi_setup_reg_vals(struct fsl_ssi_private *ssi_private) reg->tx.stcr = CCSR_SSI_STCR_TFEN0; reg->tx.scr = 0; - if (!ssi_private->imx_ac97) { + if (!fsl_ssi_is_ac97(ssi_private)) { reg->rx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE; reg->rx.sier |= CCSR_SSI_SIER_RFF0_EN; reg->tx.scr = CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE; @@ -642,96 +485,6 @@ static void fsl_ssi_setup_ac97(struct fsl_ssi_private *ssi_private) write_ssi(CCSR_SSI_SOR_WAIT(3), &ssi->sor); } -static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private) -{ - struct ccsr_ssi __iomem *ssi = ssi_private->ssi; - u8 wm; - int synchronous = ssi_private->cpu_dai_drv.symmetric_rates; - - fsl_ssi_setup_reg_vals(ssi_private); - - if (ssi_private->imx_ac97) - ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET; - else - ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE; - - /* - * Section 16.5 of the MPC8610 reference manual says that the SSI needs - * to be disabled before updating the registers we set here. - */ - write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0); - - /* - * Program the SSI into I2S Slave Non-Network Synchronous mode. Also - * enable the transmit and receive FIFO. - * - * FIXME: Little-endian samples require a different shift dir - */ - write_ssi_mask(&ssi->scr, - CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN, - CCSR_SSI_SCR_TFR_CLK_DIS | - ssi_private->i2s_mode | - (synchronous ? CCSR_SSI_SCR_SYN : 0)); - - write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFSI | - CCSR_SSI_STCR_TEFS | CCSR_SSI_STCR_TSCKP, &ssi->stcr); - - write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFSI | - CCSR_SSI_SRCR_REFS | CCSR_SSI_SRCR_RSCKP, &ssi->srcr); - - /* - * The DC and PM bits are only used if the SSI is the clock master. - */ - - /* - * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't - * use FIFO 1. We program the transmit water to signal a DMA transfer - * if there are only two (or fewer) elements left in the FIFO. Two - * elements equals one frame (left channel, right channel). This value, - * however, depends on the depth of the transmit buffer. - * - * We set the watermark on the same level as the DMA burstsize. For - * fiq it is probably better to use the biggest possible watermark - * size. - */ - if (ssi_private->use_dma) - wm = ssi_private->fifo_depth - 2; - else - wm = ssi_private->fifo_depth; - - write_ssi(CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) | - CCSR_SSI_SFCSR_TFWM1(wm) | CCSR_SSI_SFCSR_RFWM1(wm), - &ssi->sfcsr); - - /* - * For ac97 interrupts are enabled with the startup of the substream - * because it is also running without an active substream. Normally SSI - * is only enabled when there is a substream. - */ - if (ssi_private->imx_ac97) - fsl_ssi_setup_ac97(ssi_private); - - /* - * Set a default slot number so that there is no need for those common - * cases like I2S mode to call the extra set_tdm_slot() any more. - */ - if (!ssi_private->imx_ac97) { - write_ssi_mask(&ssi->stccr, CCSR_SSI_SxCCR_DC_MASK, - CCSR_SSI_SxCCR_DC(2)); - write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_DC_MASK, - CCSR_SSI_SxCCR_DC(2)); - } - - if (ssi_private->use_dual_fifo) { - write_ssi_mask(&ssi->srcr, 0, CCSR_SSI_SRCR_RFEN1); - write_ssi_mask(&ssi->stcr, 0, CCSR_SSI_STCR_TFEN1); - write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_TCH_EN); - } - - return 0; -} - - /** * fsl_ssi_startup: create a new substream * @@ -748,12 +501,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, snd_soc_dai_get_drvdata(rtd->cpu_dai); unsigned long flags; - /* First, we only do fsl_ssi_setup() when SSI is going to be active. - * Second, fsl_ssi_setup was already called by ac97_init earlier if - * the driver is in ac97 mode. - */ - if (!dai->active && !ssi_private->imx_ac97) { - fsl_ssi_setup(ssi_private); + if (!dai->active && !fsl_ssi_is_ac97(ssi_private)) { spin_lock_irqsave(&ssi_private->baudclk_lock, flags); ssi_private->baudclk_locked = false; spin_unlock_irqrestore(&ssi_private->baudclk_lock, flags); @@ -772,6 +520,102 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, } /** + * fsl_ssi_set_dai_sysclk - configure Digital Audio Interface bit clock + * + * Note: This function can be only called when using SSI as DAI master + * + * Quick instruction for parameters: + * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels + * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK. + */ +static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); + struct ccsr_ssi __iomem *ssi = ssi_private->ssi; + int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret; + u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i; + unsigned long flags, clkrate, baudrate, tmprate; + u64 sub, savesub = 100000; + + /* Don't apply it to any non-baudclk circumstance */ + if (IS_ERR(ssi_private->baudclk)) + return -EINVAL; + + /* It should be already enough to divide clock by setting pm alone */ + psr = 0; + div2 = 0; + + factor = (div2 + 1) * (7 * psr + 1) * 2; + + for (i = 0; i < 255; i++) { + /* The bclk rate must be smaller than 1/5 sysclk rate */ + if (factor * (i + 1) < 5) + continue; + + tmprate = freq * factor * (i + 2); + clkrate = clk_round_rate(ssi_private->baudclk, tmprate); + + do_div(clkrate, factor); + afreq = (u32)clkrate / (i + 1); + + if (freq == afreq) + sub = 0; + else if (freq / afreq == 1) + sub = freq - afreq; + else if (afreq / freq == 1) + sub = afreq - freq; + else + continue; + + /* Calculate the fraction */ + sub *= 100000; + do_div(sub, freq); + + if (sub < savesub) { + baudrate = tmprate; + savesub = sub; + pm = i; + } + + /* We are lucky */ + if (savesub == 0) + break; + } + + /* No proper pm found if it is still remaining the initial value */ + if (pm == 999) { + dev_err(cpu_dai->dev, "failed to handle the required sysclk\n"); + return -EINVAL; + } + + stccr = CCSR_SSI_SxCCR_PM(pm + 1) | (div2 ? CCSR_SSI_SxCCR_DIV2 : 0) | + (psr ? CCSR_SSI_SxCCR_PSR : 0); + mask = CCSR_SSI_SxCCR_PM_MASK | CCSR_SSI_SxCCR_DIV2 | + CCSR_SSI_SxCCR_PSR; + + if (dir == SND_SOC_CLOCK_OUT || synchronous) + write_ssi_mask(&ssi->stccr, mask, stccr); + else + write_ssi_mask(&ssi->srccr, mask, stccr); + + spin_lock_irqsave(&ssi_private->baudclk_lock, flags); + if (!ssi_private->baudclk_locked) { + ret = clk_set_rate(ssi_private->baudclk, baudrate); + if (ret) { + spin_unlock_irqrestore(&ssi_private->baudclk_lock, + flags); + dev_err(cpu_dai->dev, "failed to set baudclk rate\n"); + return -EINVAL; + } + ssi_private->baudclk_locked = true; + } + spin_unlock_irqrestore(&ssi_private->baudclk_lock, flags); + + return 0; +} + +/** * fsl_ssi_hw_params - program the sample size * * Most of the SSI registers have been programmed in the startup function, @@ -819,7 +663,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, else write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); - if (!ssi_private->imx_ac97) + if (!fsl_ssi_is_ac97(ssi_private)) write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_NET | CCSR_SSI_SCR_I2S_MODE_MASK, channels == 1 ? 0 : ssi_private->i2s_mode); @@ -835,9 +679,14 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); struct ccsr_ssi __iomem *ssi = ssi_private->ssi; u32 strcr = 0, stcr, srcr, scr, mask; + u8 wm; + + ssi_private->dai_fmt = fmt; + + fsl_ssi_setup_reg_vals(ssi_private); scr = read_ssi(&ssi->scr) & ~(CCSR_SSI_SCR_SYN | CCSR_SSI_SCR_I2S_MODE_MASK); - scr |= CCSR_SSI_SCR_NET; + scr |= CCSR_SSI_SCR_SYNC_TX_FS; mask = CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFDIR | CCSR_SSI_STCR_TXDIR | CCSR_SSI_STCR_TSCKP | CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TFSL | @@ -845,19 +694,19 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) stcr = read_ssi(&ssi->stcr) & ~mask; srcr = read_ssi(&ssi->srcr) & ~mask; + ssi_private->i2s_mode = CCSR_SSI_SCR_NET; switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: - ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_MASTER; + ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_MASTER; break; case SND_SOC_DAIFMT_CBM_CFM: - ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE; + ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_SLAVE; break; default: return -EINVAL; } - scr |= ssi_private->i2s_mode; /* Data on rising edge of bclk, frame low, 1clk before data */ strcr |= CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TSCKP | @@ -877,9 +726,13 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) strcr |= CCSR_SSI_STCR_TFSL | CCSR_SSI_STCR_TSCKP | CCSR_SSI_STCR_TXBIT0; break; + case SND_SOC_DAIFMT_AC97: + ssi_private->i2s_mode |= CCSR_SSI_SCR_I2S_MODE_NORMAL; + break; default: return -EINVAL; } + scr |= ssi_private->i2s_mode; /* DAI clock inversion */ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { @@ -929,99 +782,37 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) write_ssi(srcr, &ssi->srcr); write_ssi(scr, &ssi->scr); - return 0; -} - -/** - * fsl_ssi_set_dai_sysclk - configure Digital Audio Interface bit clock - * - * Note: This function can be only called when using SSI as DAI master - * - * Quick instruction for parameters: - * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels - * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK. - */ -static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); - struct ccsr_ssi __iomem *ssi = ssi_private->ssi; - int synchronous = ssi_private->cpu_dai_drv.symmetric_rates, ret; - u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i; - unsigned long flags, clkrate, baudrate, tmprate; - u64 sub, savesub = 100000; - - /* Don't apply it to any non-baudclk circumstance */ - if (IS_ERR(ssi_private->baudclk)) - return -EINVAL; - - /* It should be already enough to divide clock by setting pm alone */ - psr = 0; - div2 = 0; - - factor = (div2 + 1) * (7 * psr + 1) * 2; - - for (i = 0; i < 255; i++) { - /* The bclk rate must be smaller than 1/5 sysclk rate */ - if (factor * (i + 1) < 5) - continue; - - tmprate = freq * factor * (i + 2); - clkrate = clk_round_rate(ssi_private->baudclk, tmprate); - - do_div(clkrate, factor); - afreq = (u32)clkrate / (i + 1); - - if (freq == afreq) - sub = 0; - else if (freq / afreq == 1) - sub = freq - afreq; - else if (afreq / freq == 1) - sub = afreq - freq; - else - continue; - - /* Calculate the fraction */ - sub *= 100000; - do_div(sub, freq); - - if (sub < savesub) { - baudrate = tmprate; - savesub = sub; - pm = i; - } + /* + * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't + * use FIFO 1. We program the transmit water to signal a DMA transfer + * if there are only two (or fewer) elements left in the FIFO. Two + * elements equals one frame (left channel, right channel). This value, + * however, depends on the depth of the transmit buffer. + * + * We set the watermark on the same level as the DMA burstsize. For + * fiq it is probably better to use the biggest possible watermark + * size. + */ + if (ssi_private->use_dma) + wm = ssi_private->fifo_depth - 2; + else + wm = ssi_private->fifo_depth; - /* We are lucky */ - if (savesub == 0) - break; - } + write_ssi(CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) | + CCSR_SSI_SFCSR_TFWM1(wm) | CCSR_SSI_SFCSR_RFWM1(wm), + &ssi->sfcsr); - /* No proper pm found if it is still remaining the initial value */ - if (pm == 999) { - dev_err(cpu_dai->dev, "failed to handle the required sysclk\n"); - return -EINVAL; + if (ssi_private->use_dual_fifo) { + write_ssi_mask(&ssi->srcr, CCSR_SSI_SRCR_RFEN1, + CCSR_SSI_SRCR_RFEN1); + write_ssi_mask(&ssi->stcr, CCSR_SSI_STCR_TFEN1, + CCSR_SSI_STCR_TFEN1); + write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_TCH_EN, + CCSR_SSI_SCR_TCH_EN); } - stccr = CCSR_SSI_SxCCR_PM(pm + 1) | (div2 ? CCSR_SSI_SxCCR_DIV2 : 0) | - (psr ? CCSR_SSI_SxCCR_PSR : 0); - mask = CCSR_SSI_SxCCR_PM_MASK | CCSR_SSI_SxCCR_DIV2 | CCSR_SSI_SxCCR_PSR; - - if (dir == SND_SOC_CLOCK_OUT || synchronous) - write_ssi_mask(&ssi->stccr, mask, stccr); - else - write_ssi_mask(&ssi->srccr, mask, stccr); - - spin_lock_irqsave(&ssi_private->baudclk_lock, flags); - if (!ssi_private->baudclk_locked) { - ret = clk_set_rate(ssi_private->baudclk, baudrate); - if (ret) { - spin_unlock_irqrestore(&ssi_private->baudclk_lock, flags); - dev_err(cpu_dai->dev, "failed to set baudclk rate\n"); - return -EINVAL; - } - ssi_private->baudclk_locked = true; - } - spin_unlock_irqrestore(&ssi_private->baudclk_lock, flags); + if (fmt & SND_SOC_DAIFMT_AC97) + fsl_ssi_setup_ac97(ssi_private); return 0; } @@ -1097,7 +888,7 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, else fsl_ssi_rx_config(ssi_private, false); - if (!ssi_private->imx_ac97 && (read_ssi(&ssi->scr) & + if (!fsl_ssi_is_ac97(ssi_private) && (read_ssi(&ssi->scr) & (CCSR_SSI_SCR_TE | CCSR_SSI_SCR_RE)) == 0) { spin_lock_irqsave(&ssi_private->baudclk_lock, flags); ssi_private->baudclk_locked = false; @@ -1109,7 +900,7 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, return -EINVAL; } - if (ssi_private->imx_ac97) { + if (fsl_ssi_is_ac97(ssi_private)) { if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) write_ssi(CCSR_SSI_SOR_TX_CLR, &ssi->sor); else @@ -1123,7 +914,7 @@ static int fsl_ssi_dai_probe(struct snd_soc_dai *dai) { struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(dai); - if (ssi_private->ssi_on_imx && ssi_private->use_dma) { + if (fsl_ssi_on_imx(ssi_private) && ssi_private->use_dma) { dai->playback_dma_data = &ssi_private->dma_params_tx; dai->capture_dma_data = &ssi_private->dma_params_rx; } @@ -1184,11 +975,6 @@ static struct snd_soc_dai_driver fsl_ssi_ac97_dai = { static struct fsl_ssi_private *fsl_ac97_data; -static void fsl_ssi_ac97_init(void) -{ - fsl_ssi_setup(fsl_ac97_data); -} - static void fsl_ssi_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val) { @@ -1251,11 +1037,107 @@ static void make_lowercase(char *s) } } +static int fsl_ssi_imx_probe(struct platform_device *pdev, + struct fsl_ssi_private *ssi_private, void __iomem *iomem) +{ + struct device_node *np = pdev->dev.of_node; + u32 dmas[4]; + int ret; + + ssi_private->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(ssi_private->clk)) { + ret = PTR_ERR(ssi_private->clk); + dev_err(&pdev->dev, "could not get clock: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(ssi_private->clk); + if (ret) { + dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret); + return ret; + } + + /* For those SLAVE implementations, we ingore non-baudclk cases + * and, instead, abandon MASTER mode that needs baud clock. + */ + ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud"); + if (IS_ERR(ssi_private->baudclk)) + dev_dbg(&pdev->dev, "could not get baud clock: %ld\n", + PTR_ERR(ssi_private->baudclk)); + else + clk_prepare_enable(ssi_private->baudclk); + + /* + * We have burstsize be "fifo_depth - 2" to match the SSI + * watermark setting in fsl_ssi_startup(). + */ + ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2; + ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2; + ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + + offsetof(struct ccsr_ssi, stx0); + ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + + offsetof(struct ccsr_ssi, srx0); + + ret = !of_property_read_u32_array(np, "dmas", dmas, 4); + if (ssi_private->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL) { + ssi_private->use_dual_fifo = true; + /* When using dual fifo mode, we need to keep watermark + * as even numbers due to dma script limitation. + */ + ssi_private->dma_params_tx.maxburst &= ~0x1; + ssi_private->dma_params_rx.maxburst &= ~0x1; + } + + if (!ssi_private->use_dma) { + + /* + * Some boards use an incompatible codec. To get it + * working, we are using imx-fiq-pcm-audio, that + * can handle those codecs. DMA is not possible in this + * situation. + */ + + ssi_private->fiq_params.irq = ssi_private->irq; + ssi_private->fiq_params.base = iomem; + ssi_private->fiq_params.dma_params_rx = + &ssi_private->dma_params_rx; + ssi_private->fiq_params.dma_params_tx = + &ssi_private->dma_params_tx; + + ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params); + if (ret) + goto error_pcm; + } else { + ret = imx_pcm_dma_init(pdev); + if (ret) + goto error_pcm; + } + + return 0; + +error_pcm: + if (!IS_ERR(ssi_private->baudclk)) + clk_disable_unprepare(ssi_private->baudclk); + + clk_disable_unprepare(ssi_private->clk); + + return ret; +} + +static void fsl_ssi_imx_clean(struct platform_device *pdev, + struct fsl_ssi_private *ssi_private) +{ + if (!ssi_private->use_dma) + imx_pcm_fiq_exit(pdev); + if (!IS_ERR(ssi_private->baudclk)) + clk_disable_unprepare(ssi_private->baudclk); + clk_disable_unprepare(ssi_private->clk); +} + static int fsl_ssi_probe(struct platform_device *pdev) { struct fsl_ssi_private *ssi_private; int ret = 0; - struct device_attribute *dev_attr = NULL; struct device_node *np = pdev->dev.of_node; const struct of_device_id *of_id; enum fsl_ssi_type hw_type; @@ -1263,7 +1145,6 @@ static int fsl_ssi_probe(struct platform_device *pdev) const uint32_t *iprop; struct resource res; char name[64]; - bool shared; bool ac97 = false; /* SSIs that are not connected on the board should have a @@ -1286,17 +1167,13 @@ static int fsl_ssi_probe(struct platform_device *pdev) if (!strcmp(sprop, "ac97-slave")) ac97 = true; - /* The DAI name is the last part of the full name of the node. */ - p = strrchr(np->full_name, '/') + 1; - ssi_private = devm_kzalloc(&pdev->dev, sizeof(*ssi_private) + strlen(p), - GFP_KERNEL); + ssi_private = devm_kzalloc(&pdev->dev, sizeof(*ssi_private), + GFP_KERNEL); if (!ssi_private) { dev_err(&pdev->dev, "could not allocate DAI object\n"); return -ENOMEM; } - strcpy(ssi_private->name, p); - ssi_private->use_dma = !of_property_read_bool(np, "fsl,fiq-stream-filter"); ssi_private->hw_type = hw_type; @@ -1306,7 +1183,6 @@ static int fsl_ssi_probe(struct platform_device *pdev) sizeof(fsl_ssi_ac97_dai)); fsl_ac97_data = ssi_private; - ssi_private->imx_ac97 = true; snd_soc_set_ac97_ops_of_reset(&fsl_ssi_ac97_ops, pdev); } else { @@ -1314,7 +1190,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template, sizeof(fsl_ssi_dai_template)); } - ssi_private->cpu_dai_drv.name = ssi_private->name; + ssi_private->cpu_dai_drv.name = dev_name(&pdev->dev); /* Get the addresses and IRQ */ ret = of_address_to_resource(np, 0, &res); @@ -1353,177 +1229,43 @@ static int fsl_ssi_probe(struct platform_device *pdev) ssi_private->baudclk_locked = false; spin_lock_init(&ssi_private->baudclk_lock); - /* - * imx51 and later SoCs have a slightly different IP that allows the - * SSI configuration while the SSI unit is running. - * - * More important, it is necessary on those SoCs to configure the - * sperate TX/RX DMA bits just before starting the stream - * (fsl_ssi_trigger). The SDMA unit has to be configured before fsl_ssi - * sends any DMA requests to the SDMA unit, otherwise it is not defined - * how the SDMA unit handles the DMA request. - * - * SDMA units are present on devices starting at imx35 but the imx35 - * reference manual states that the DMA bits should not be changed - * while the SSI unit is running (SSIEN). So we support the necessary - * online configuration of fsl-ssi starting at imx51. - */ - switch (hw_type) { - case FSL_SSI_MCP8610: - case FSL_SSI_MX21: - case FSL_SSI_MX35: - ssi_private->offline_config = true; - break; - case FSL_SSI_MX51: - ssi_private->offline_config = false; - break; - } - - if (hw_type == FSL_SSI_MX21 || hw_type == FSL_SSI_MX51 || - hw_type == FSL_SSI_MX35) { - u32 dma_events[2], dmas[4]; - ssi_private->ssi_on_imx = true; + dev_set_drvdata(&pdev->dev, ssi_private); - ssi_private->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(ssi_private->clk)) { - ret = PTR_ERR(ssi_private->clk); - dev_err(&pdev->dev, "could not get clock: %d\n", ret); - goto error_irqmap; - } - ret = clk_prepare_enable(ssi_private->clk); - if (ret) { - dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", - ret); + if (fsl_ssi_on_imx(ssi_private)) { + ret = fsl_ssi_imx_probe(pdev, ssi_private, ssi_private->ssi); + if (ret) goto error_irqmap; - } - - /* For those SLAVE implementations, we ingore non-baudclk cases - * and, instead, abandon MASTER mode that needs baud clock. - */ - ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud"); - if (IS_ERR(ssi_private->baudclk)) - dev_dbg(&pdev->dev, "could not get baud clock: %ld\n", - PTR_ERR(ssi_private->baudclk)); - else - clk_prepare_enable(ssi_private->baudclk); - - /* - * We have burstsize be "fifo_depth - 2" to match the SSI - * watermark setting in fsl_ssi_startup(). - */ - ssi_private->dma_params_tx.maxburst = - ssi_private->fifo_depth - 2; - ssi_private->dma_params_rx.maxburst = - ssi_private->fifo_depth - 2; - ssi_private->dma_params_tx.addr = - ssi_private->ssi_phys + offsetof(struct ccsr_ssi, stx0); - ssi_private->dma_params_rx.addr = - ssi_private->ssi_phys + offsetof(struct ccsr_ssi, srx0); - ssi_private->dma_params_tx.filter_data = - &ssi_private->filter_data_tx; - ssi_private->dma_params_rx.filter_data = - &ssi_private->filter_data_rx; - if (!of_property_read_bool(pdev->dev.of_node, "dmas") && - ssi_private->use_dma) { - /* - * FIXME: This is a temporary solution until all - * necessary dma drivers support the generic dma - * bindings. - */ - ret = of_property_read_u32_array(pdev->dev.of_node, - "fsl,ssi-dma-events", dma_events, 2); - if (ret && ssi_private->use_dma) { - dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n"); - goto error_clk; - } - } - /* Should this be merge with the above? */ - if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4) - && dmas[2] == IMX_DMATYPE_SSI_DUAL) { - ssi_private->use_dual_fifo = true; - /* When using dual fifo mode, we need to keep watermark - * as even numbers due to dma script limitation. - */ - ssi_private->dma_params_tx.maxburst &= ~0x1; - ssi_private->dma_params_rx.maxburst &= ~0x1; - } - - shared = of_device_is_compatible(of_get_parent(np), - "fsl,spba-bus"); + } - imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx, - dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI); - imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx, - dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI); + ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component, + &ssi_private->cpu_dai_drv, 1); + if (ret) { + dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); + goto error_asoc_register; } - /* - * Enable interrupts only for MCP8610 and MX51. The other MXs have - * different writeable interrupt status registers. - */ if (ssi_private->use_dma) { - /* The 'name' should not have any slashes in it. */ ret = devm_request_irq(&pdev->dev, ssi_private->irq, - fsl_ssi_isr, 0, ssi_private->name, + fsl_ssi_isr, 0, dev_name(&pdev->dev), ssi_private); - ssi_private->irq_stats = true; if (ret < 0) { dev_err(&pdev->dev, "could not claim irq %u\n", ssi_private->irq); - goto error_clk; + goto error_irq; } } - /* Register with ASoC */ - dev_set_drvdata(&pdev->dev, ssi_private); - - ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component, - &ssi_private->cpu_dai_drv, 1); - if (ret) { - dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); - goto error_dev; - } - - ret = fsl_ssi_debugfs_create(ssi_private, &pdev->dev); + ret = fsl_ssi_debugfs_create(&ssi_private->dbg_stats, &pdev->dev); if (ret) - goto error_dbgfs; - - if (ssi_private->ssi_on_imx) { - if (!ssi_private->use_dma) { - - /* - * Some boards use an incompatible codec. To get it - * working, we are using imx-fiq-pcm-audio, that - * can handle those codecs. DMA is not possible in this - * situation. - */ - - ssi_private->fiq_params.irq = ssi_private->irq; - ssi_private->fiq_params.base = ssi_private->ssi; - ssi_private->fiq_params.dma_params_rx = - &ssi_private->dma_params_rx; - ssi_private->fiq_params.dma_params_tx = - &ssi_private->dma_params_tx; - - ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params); - if (ret) - goto error_pcm; - } else { - ret = imx_pcm_dma_init(pdev); - if (ret) - goto error_pcm; - } - } + goto error_asoc_register; /* * If codec-handle property is missing from SSI node, we assume * that the machine driver uses new binding which does not require * SSI driver to trigger machine driver's probe. */ - if (!of_get_property(np, "codec-handle", NULL)) { - ssi_private->new_binding = true; + if (!of_get_property(np, "codec-handle", NULL)) goto done; - } /* Trigger the machine driver's probe function. The platform driver * name of the machine driver is taken from /compatible property of the @@ -1543,37 +1285,24 @@ static int fsl_ssi_probe(struct platform_device *pdev) if (IS_ERR(ssi_private->pdev)) { ret = PTR_ERR(ssi_private->pdev); dev_err(&pdev->dev, "failed to register platform: %d\n", ret); - goto error_dai; + goto error_sound_card; } done: - if (ssi_private->imx_ac97) - fsl_ssi_ac97_init(); - return 0; -error_dai: - if (ssi_private->ssi_on_imx && !ssi_private->use_dma) - imx_pcm_fiq_exit(pdev); - -error_pcm: - fsl_ssi_debugfs_remove(ssi_private); +error_sound_card: + fsl_ssi_debugfs_remove(&ssi_private->dbg_stats); -error_dbgfs: +error_irq: snd_soc_unregister_component(&pdev->dev); -error_dev: - device_remove_file(&pdev->dev, dev_attr); - -error_clk: - if (ssi_private->ssi_on_imx) { - if (!IS_ERR(ssi_private->baudclk)) - clk_disable_unprepare(ssi_private->baudclk); - clk_disable_unprepare(ssi_private->clk); - } +error_asoc_register: + if (fsl_ssi_on_imx(ssi_private)) + fsl_ssi_imx_clean(pdev, ssi_private); error_irqmap: - if (ssi_private->irq_stats) + if (ssi_private->use_dma) irq_dispose_mapping(ssi_private->irq); return ret; @@ -1583,17 +1312,16 @@ static int fsl_ssi_remove(struct platform_device *pdev) { struct fsl_ssi_private *ssi_private = dev_get_drvdata(&pdev->dev); - fsl_ssi_debugfs_remove(ssi_private); + fsl_ssi_debugfs_remove(&ssi_private->dbg_stats); - if (!ssi_private->new_binding) + if (ssi_private->pdev) platform_device_unregister(ssi_private->pdev); snd_soc_unregister_component(&pdev->dev); - if (ssi_private->ssi_on_imx) { - if (!IS_ERR(ssi_private->baudclk)) - clk_disable_unprepare(ssi_private->baudclk); - clk_disable_unprepare(ssi_private->clk); - } - if (ssi_private->irq_stats) + + if (fsl_ssi_on_imx(ssi_private)) + fsl_ssi_imx_clean(pdev, ssi_private); + + if (ssi_private->use_dma) irq_dispose_mapping(ssi_private->irq); return 0; |