summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8903.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
-rw-r--r--sound/soc/codecs/wm8903.c217
1 files changed, 196 insertions, 21 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index fa5f99fde68b..bf08282d5ee5 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -11,26 +11,27 @@
*
* TODO:
* - TDM mode configuration.
- * - Mic detect.
* - Digital microphone support.
- * - Interrupt support (mic detect and sequencer).
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
+#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <sound/core.h>
+#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/tlv.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
+#include <sound/wm8903.h>
#include "wm8903.h"
@@ -222,6 +223,14 @@ struct wm8903_priv {
int playback_active;
int capture_active;
+ struct completion wseq;
+
+ struct snd_soc_jack *mic_jack;
+ int mic_det;
+ int mic_short;
+ int mic_last_report;
+ int mic_delay;
+
struct snd_pcm_substream *master_substream;
struct snd_pcm_substream *slave_substream;
};
@@ -244,13 +253,14 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
{
u16 reg[5];
struct i2c_client *i2c = codec->control_data;
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
BUG_ON(start > 48);
- /* Enable the sequencer */
+ /* Enable the sequencer if it's not already on */
reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0);
- reg[0] |= WM8903_WSEQ_ENA;
- snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
+ reg[0] | WM8903_WSEQ_ENA);
dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
@@ -258,20 +268,19 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
start | WM8903_WSEQ_START);
/* Wait for it to complete. If we have the interrupt wired up then
- * we could block waiting for an interrupt, though polling may still
- * be desirable for diagnostic purposes.
+ * that will break us out of the poll early.
*/
do {
- msleep(10);
+ wait_for_completion_timeout(&wm8903->wseq,
+ msecs_to_jiffies(10));
reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
} while (reg[4] & WM8903_WSEQ_BUSY);
dev_dbg(&i2c->dev, "Sequence complete\n");
- /* Disable the sequencer again */
- snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
- reg[0] & ~WM8903_WSEQ_ENA);
+ /* Disable the sequencer again if we enabled it */
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
return 0;
}
@@ -412,7 +421,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct snd_soc_codec *codec = widget->codec;
- struct wm8903_priv *wm8903 = codec->private_data;
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct i2c_client *i2c = codec->control_data;
u16 reg;
int ret;
@@ -993,7 +1002,7 @@ static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
- struct wm8903_priv *wm8903 = codec->private_data;
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
wm8903->sysclk = freq;
@@ -1221,7 +1230,7 @@ static int wm8903_startup(struct snd_pcm_substream *substream,
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- struct wm8903_priv *wm8903 = codec->private_data;
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct i2c_client *i2c = codec->control_data;
struct snd_pcm_runtime *master_runtime;
@@ -1257,7 +1266,7 @@ static void wm8903_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- struct wm8903_priv *wm8903 = codec->private_data;
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
wm8903->playback_active--;
@@ -1277,7 +1286,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- struct wm8903_priv *wm8903 = codec->private_data;
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
struct i2c_client *i2c = codec->control_data;
int fs = params_rate(params);
int bclk;
@@ -1436,6 +1445,116 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
return 0;
}
+/**
+ * wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
+ *
+ * @codec: WM8903 codec
+ * @jack: jack to report detection events on
+ * @det: value to report for presence detection
+ * @shrt: value to report for short detection
+ *
+ * Enable microphone detection via IRQ on the WM8903. If GPIOs are
+ * being used to bring out signals to the processor then only platform
+ * data configuration is needed for WM8903 and processor GPIOs should
+ * be configured using snd_soc_jack_add_gpios() instead.
+ *
+ * The current threasholds for detection should be configured using
+ * micdet_cfg in the platform data. Using this function will force on
+ * the microphone bias for the device.
+ */
+int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
+ int det, int shrt)
+{
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT;
+
+ dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n",
+ det, shrt);
+
+ /* Store the configuration */
+ wm8903->mic_jack = jack;
+ wm8903->mic_det = det;
+ wm8903->mic_short = shrt;
+
+ /* Enable interrupts we've got a report configured for */
+ if (det)
+ irq_mask &= ~WM8903_MICDET_EINT;
+ if (shrt)
+ irq_mask &= ~WM8903_MICSHRT_EINT;
+
+ snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
+ WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
+ irq_mask);
+
+ if (det && shrt) {
+ /* Enable mic detection, this may not have been set through
+ * platform data (eg, if the defaults are OK). */
+ snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
+ WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
+ snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
+ WM8903_MICDET_ENA, WM8903_MICDET_ENA);
+ } else {
+ snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
+ WM8903_MICDET_ENA, 0);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm8903_mic_detect);
+
+static irqreturn_t wm8903_irq(int irq, void *data)
+{
+ struct wm8903_priv *wm8903 = data;
+ struct snd_soc_codec *codec = &wm8903->codec;
+ int mic_report;
+ int int_pol;
+ int int_val = 0;
+ int mask = ~snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1_MASK);
+
+ int_val = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1) & mask;
+
+ if (int_val & WM8903_WSEQ_BUSY_EINT) {
+ dev_dbg(codec->dev, "Write sequencer done\n");
+ complete(&wm8903->wseq);
+ }
+
+ /*
+ * The rest is microphone jack detection. We need to manually
+ * invert the polarity of the interrupt after each event - to
+ * simplify the code keep track of the last state we reported
+ * and just invert the relevant bits in both the report and
+ * the polarity register.
+ */
+ mic_report = wm8903->mic_last_report;
+ int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1);
+
+ if (int_val & WM8903_MICSHRT_EINT) {
+ dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol);
+
+ mic_report ^= wm8903->mic_short;
+ int_pol ^= WM8903_MICSHRT_INV;
+ }
+
+ if (int_val & WM8903_MICDET_EINT) {
+ dev_dbg(codec->dev, "Microphone detect (pol=%x)\n", int_pol);
+
+ mic_report ^= wm8903->mic_det;
+ int_pol ^= WM8903_MICDET_INV;
+
+ msleep(wm8903->mic_delay);
+ }
+
+ snd_soc_update_bits(codec, WM8903_INTERRUPT_POLARITY_1,
+ WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol);
+
+ snd_soc_jack_report(wm8903->mic_jack, mic_report,
+ wm8903->mic_short | wm8903->mic_det);
+
+ wm8903->mic_last_report = mic_report;
+
+ return IRQ_HANDLED;
+}
+
#define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
SNDRV_PCM_RATE_11025 | \
SNDRV_PCM_RATE_16000 | \
@@ -1510,7 +1629,6 @@ static int wm8903_resume(struct platform_device *pdev)
/* Bring the codec back up to standby first to minimise pop/clicks */
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- wm8903_set_bias_level(codec, codec->suspend_bias_level);
/* Sync back everything else */
if (tmp_cache) {
@@ -1530,9 +1648,11 @@ static struct snd_soc_codec *wm8903_codec;
static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct wm8903_priv *wm8903;
struct snd_soc_codec *codec;
- int ret;
+ int ret, i;
+ int trigger, irq_pol;
u16 val;
wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
@@ -1554,8 +1674,9 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
codec->num_dai = 1;
codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
codec->reg_cache = &wm8903->reg_cache[0];
- codec->private_data = wm8903;
+ snd_soc_codec_set_drvdata(codec, wm8903);
codec->volatile_register = wm8903_volatile_register;
+ init_completion(&wm8903->wseq);
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
@@ -1579,6 +1700,53 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
wm8903_reset(codec);
+ /* Set up GPIOs and microphone detection */
+ if (pdata) {
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
+ if (!pdata->gpio_cfg[i])
+ continue;
+
+ snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,
+ pdata->gpio_cfg[i] & 0xffff);
+ }
+
+ snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0,
+ pdata->micdet_cfg);
+
+ /* Microphone detection needs the WSEQ clock */
+ if (pdata->micdet_cfg)
+ snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
+ WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
+
+ wm8903->mic_delay = pdata->micdet_delay;
+ }
+
+ if (i2c->irq) {
+ if (pdata && pdata->irq_active_low) {
+ trigger = IRQF_TRIGGER_LOW;
+ irq_pol = WM8903_IRQ_POL;
+ } else {
+ trigger = IRQF_TRIGGER_HIGH;
+ irq_pol = 0;
+ }
+
+ snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL,
+ WM8903_IRQ_POL, irq_pol);
+
+ ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
+ trigger | IRQF_ONESHOT,
+ "wm8903", wm8903);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to request IRQ: %d\n",
+ ret);
+ goto err;
+ }
+
+ /* Enable write sequencer interrupts */
+ snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
+ WM8903_IM_WSEQ_BUSY_EINT, 0);
+ }
+
/* power on device */
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -1619,7 +1787,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
- goto err;
+ goto err_irq;
}
ret = snd_soc_register_dai(&wm8903_dai);
@@ -1632,6 +1800,9 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
err_codec:
snd_soc_unregister_codec(codec);
+err_irq:
+ if (i2c->irq)
+ free_irq(i2c->irq, wm8903);
err:
wm8903_codec = NULL;
kfree(wm8903);
@@ -1641,13 +1812,17 @@ err:
static __devexit int wm8903_i2c_remove(struct i2c_client *client)
{
struct snd_soc_codec *codec = i2c_get_clientdata(client);
+ struct wm8903_priv *priv = snd_soc_codec_get_drvdata(codec);
snd_soc_unregister_dai(&wm8903_dai);
snd_soc_unregister_codec(codec);
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
- kfree(codec->private_data);
+ if (client->irq)
+ free_irq(client->irq, priv);
+
+ kfree(priv);
wm8903_codec = NULL;
wm8903_dai.dev = NULL;