diff options
Diffstat (limited to 'sound/soc/atmel')
-rw-r--r-- | sound/soc/atmel/mchp-i2s-mcc.c | 70 |
1 files changed, 37 insertions, 33 deletions
diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c index 86495883ca3f..9a406144b18f 100644 --- a/sound/soc/atmel/mchp-i2s-mcc.c +++ b/sound/soc/atmel/mchp-i2s-mcc.c @@ -392,11 +392,11 @@ static int mchp_i2s_mcc_clk_get_rate_diff(struct clk *clk, } static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, - unsigned int bclk, unsigned int *mra) + unsigned int bclk, unsigned int *mra, + unsigned long *best_rate) { unsigned long clk_rate; unsigned long lcm_rate; - unsigned long best_rate = 0; unsigned long best_diff_rate = ~0; unsigned int sysclk; struct clk *best_clk = NULL; @@ -423,7 +423,7 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, (clk_rate == bclk || clk_rate / (bclk * 2) <= GENMASK(5, 0)); clk_rate += lcm_rate) { ret = mchp_i2s_mcc_clk_get_rate_diff(dev->gclk, clk_rate, - &best_clk, &best_rate, + &best_clk, best_rate, &best_diff_rate); if (ret) { dev_err(dev->dev, "gclk error for rate %lu: %d", @@ -437,7 +437,7 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, } ret = mchp_i2s_mcc_clk_get_rate_diff(dev->pclk, clk_rate, - &best_clk, &best_rate, + &best_clk, best_rate, &best_diff_rate); if (ret) { dev_err(dev->dev, "pclk error for rate %lu: %d", @@ -459,33 +459,17 @@ static int mchp_i2s_mcc_config_divs(struct mchp_i2s_mcc_dev *dev, dev_dbg(dev->dev, "source CLK is %s with rate %lu, diff %lu\n", best_clk == dev->pclk ? "pclk" : "gclk", - best_rate, best_diff_rate); - - /* set the rate */ - ret = clk_set_rate(best_clk, best_rate); - if (ret) { - dev_err(dev->dev, "unable to set rate %lu to %s: %d\n", - best_rate, best_clk == dev->pclk ? "PCLK" : "GCLK", - ret); - return ret; - } + *best_rate, best_diff_rate); /* Configure divisors */ if (dev->sysclk) - *mra |= MCHP_I2SMCC_MRA_IMCKDIV(best_rate / (2 * sysclk)); - *mra |= MCHP_I2SMCC_MRA_ISCKDIV(best_rate / (2 * bclk)); + *mra |= MCHP_I2SMCC_MRA_IMCKDIV(*best_rate / (2 * sysclk)); + *mra |= MCHP_I2SMCC_MRA_ISCKDIV(*best_rate / (2 * bclk)); - if (best_clk == dev->gclk) { + if (best_clk == dev->gclk) *mra |= MCHP_I2SMCC_MRA_SRCCLK_GCLK; - ret = clk_prepare(dev->gclk); - if (ret < 0) - dev_err(dev->dev, "unable to prepare GCLK: %d\n", ret); - else - dev->gclk_use = 1; - } else { + else *mra |= MCHP_I2SMCC_MRA_SRCCLK_PCLK; - dev->gclk_use = 0; - } return 0; } @@ -502,6 +486,7 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { + unsigned long rate = 0; struct mchp_i2s_mcc_dev *dev = snd_soc_dai_get_drvdata(dai); u32 mra = 0; u32 mrb = 0; @@ -640,6 +625,17 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } + if (set_divs) { + bclk_rate = frame_length * params_rate(params); + ret = mchp_i2s_mcc_config_divs(dev, bclk_rate, &mra, + &rate); + if (ret) { + dev_err(dev->dev, + "unable to configure the divisors: %d\n", ret); + return ret; + } + } + /* * If we are already running, the wanted setup must be * the same with the one that's currently ongoing @@ -656,19 +652,27 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream, return 0; } - /* Save the number of channels to know what interrupts to enable */ - dev->channels = channels; - - if (set_divs) { - bclk_rate = frame_length * params_rate(params); - ret = mchp_i2s_mcc_config_divs(dev, bclk_rate, &mra); + if (mra & MCHP_I2SMCC_MRA_SRCCLK_GCLK && !dev->gclk_use) { + /* set the rate */ + ret = clk_set_rate(dev->gclk, rate); if (ret) { - dev_err(dev->dev, "unable to configure the divisors: %d\n", - ret); + dev_err(dev->dev, + "unable to set rate %lu to GCLK: %d\n", + rate, ret); + return ret; + } + + ret = clk_prepare(dev->gclk); + if (ret < 0) { + dev_err(dev->dev, "unable to prepare GCLK: %d\n", ret); return ret; } + dev->gclk_use = 1; } + /* Save the number of channels to know what interrupts to enable */ + dev->channels = channels; + ret = regmap_write(dev->regmap, MCHP_I2SMCC_MRA, mra); if (ret < 0) return ret; |