summaryrefslogtreecommitdiffstats
path: root/sound/pci/maestro3.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/maestro3.c')
-rw-r--r--sound/pci/maestro3.c42
1 files changed, 21 insertions, 21 deletions
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index d5417360f51f..0d3ea3e79952 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -1403,7 +1403,7 @@ static int snd_m3_pcm_hw_params(struct snd_pcm_substream *substream,
/* set buffer address */
s->buffer_addr = substream->runtime->dma_addr;
if (s->buffer_addr & 0x3) {
- snd_printk(KERN_ERR "oh my, not aligned\n");
+ dev_err(substream->pcm->card->dev, "oh my, not aligned\n");
s->buffer_addr = s->buffer_addr & ~0x3;
}
return 0;
@@ -1900,7 +1900,7 @@ static int snd_m3_ac97_wait(struct snd_m3 *chip)
cpu_relax();
} while (i-- > 0);
- snd_printk(KERN_ERR "ac97 serial bus busy\n");
+ dev_err(chip->card->dev, "ac97 serial bus busy\n");
return 1;
}
@@ -2015,7 +2015,8 @@ static void snd_m3_ac97_reset(struct snd_m3 *chip)
delay1 += 10;
delay2 += 100;
- snd_printd("maestro3: retrying codec reset with delays of %d and %d ms\n",
+ dev_dbg(chip->card->dev,
+ "retrying codec reset with delays of %d and %d ms\n",
delay1, delay2);
}
@@ -2194,7 +2195,8 @@ static int snd_m3_assp_client_init(struct snd_m3 *chip, struct m3_dma *s, int in
address = 0x1100 + ((data_bytes/2) * index);
if ((address + (data_bytes/2)) >= 0x1c00) {
- snd_printk(KERN_ERR "no memory for %d bytes at ind %d (addr 0x%x)\n",
+ dev_err(chip->card->dev,
+ "no memory for %d bytes at ind %d (addr 0x%x)\n",
data_bytes, index, address);
return -ENOMEM;
}
@@ -2439,8 +2441,7 @@ static int m3_resume(struct device *dev)
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
- printk(KERN_ERR "maestor3: pci_enable_device failed, "
- "disabling device\n");
+ dev_err(dev, "pci_enable_device failed, disabling device\n");
snd_card_disconnect(card);
return -EIO;
}
@@ -2553,7 +2554,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
/* check, if we can restrict PCI DMA transfers to 28 bits */
if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
- snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
+ dev_err(card->dev,
+ "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
@@ -2586,9 +2588,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
else {
quirk = snd_pci_quirk_lookup(pci, m3_amp_quirk_list);
if (quirk) {
- snd_printdd(KERN_INFO
- "maestro3: set amp-gpio for '%s'\n",
- snd_pci_quirk_name(quirk));
+ dev_info(card->dev, "set amp-gpio for '%s'\n",
+ snd_pci_quirk_name(quirk));
chip->amp_gpio = quirk->value;
} else if (chip->allegro_flag)
chip->amp_gpio = GPO_EXT_AMP_ALLEGRO;
@@ -2598,9 +2599,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
quirk = snd_pci_quirk_lookup(pci, m3_irda_quirk_list);
if (quirk) {
- snd_printdd(KERN_INFO
- "maestro3: enabled irda workaround for '%s'\n",
- snd_pci_quirk_name(quirk));
+ dev_info(card->dev, "enabled irda workaround for '%s'\n",
+ snd_pci_quirk_name(quirk));
chip->irda_workaround = 1;
}
quirk = snd_pci_quirk_lookup(pci, m3_hv_quirk_list);
@@ -2652,7 +2652,7 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
if (request_irq(pci->irq, snd_m3_interrupt, IRQF_SHARED,
KBUILD_MODNAME, chip)) {
- snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+ dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
snd_m3_free(chip);
return -ENOMEM;
}
@@ -2661,7 +2661,7 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
#ifdef CONFIG_PM_SLEEP
chip->suspend_mem = vmalloc(sizeof(u16) * (REV_B_CODE_MEMORY_LENGTH + REV_B_DATA_MEMORY_LENGTH));
if (chip->suspend_mem == NULL)
- snd_printk(KERN_WARNING "can't allocate apm buffer\n");
+ dev_warn(card->dev, "can't allocate apm buffer\n");
#endif
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
@@ -2685,16 +2685,15 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
if (chip->hv_config & HV_CTRL_ENABLE) {
err = snd_m3_input_register(chip);
if (err)
- snd_printk(KERN_WARNING "Input device registration "
- "failed with error %i", err);
+ dev_warn(card->dev,
+ "Input device registration failed with error %i",
+ err);
}
#endif
snd_m3_enable_ints(chip);
snd_m3_assp_continue(chip);
- snd_card_set_dev(card, &pci->dev);
-
*chip_ret = chip;
return 0;
@@ -2721,7 +2720,8 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
return -ENOENT;
}
- err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+ err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE,
+ 0, &card);
if (err < 0)
return err;
@@ -2764,7 +2764,7 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
-1, &chip->rmidi);
if (err < 0)
- printk(KERN_WARNING "maestro3: no MIDI support.\n");
+ dev_warn(card->dev, "no MIDI support.\n");
#endif
pci_set_drvdata(pci, card);