diff options
Diffstat (limited to 'sound/pci/hda/alc260_quirks.c')
| -rw-r--r-- | sound/pci/hda/alc260_quirks.c | 968 |
1 files changed, 0 insertions, 968 deletions
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c deleted file mode 100644 index 3b5170b9700f..000000000000 --- a/sound/pci/hda/alc260_quirks.c +++ /dev/null @@ -1,968 +0,0 @@ -/* - * ALC260 quirk models - * included by patch_realtek.c - */ - -/* ALC260 models */ -enum { - ALC260_AUTO, - ALC260_BASIC, - ALC260_FUJITSU_S702X, - ALC260_ACER, - ALC260_WILL, - ALC260_REPLACER_672V, - ALC260_FAVORIT100, -#ifdef CONFIG_SND_DEBUG - ALC260_TEST, -#endif - ALC260_MODEL_LAST /* last tag */ -}; - -static const hda_nid_t alc260_dac_nids[1] = { - /* front */ - 0x02, -}; - -static const hda_nid_t alc260_adc_nids[1] = { - /* ADC0 */ - 0x04, -}; - -static const hda_nid_t alc260_adc_nids_alt[1] = { - /* ADC1 */ - 0x05, -}; - -/* NIDs used when simultaneous access to both ADCs makes sense. Note that - * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC. - */ -static const hda_nid_t alc260_dual_adc_nids[2] = { - /* ADC0, ADC1 */ - 0x04, 0x05 -}; - -#define ALC260_DIGOUT_NID 0x03 -#define ALC260_DIGIN_NID 0x06 - -static const struct hda_input_mux alc260_capture_source = { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Front Mic", 0x1 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, -}; - -/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack, - * headphone jack and the internal CD lines since these are the only pins at - * which audio can appear. For flexibility, also allow the option of - * recording the mixer output on the second ADC (ADC0 doesn't have a - * connection to the mixer output). - */ -static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = { - { - .num_items = 3, - .items = { - { "Mic/Line", 0x0 }, - { "CD", 0x4 }, - { "Headphone", 0x2 }, - }, - }, - { - .num_items = 4, - .items = { - { "Mic/Line", 0x0 }, - { "CD", 0x4 }, - { "Headphone", 0x2 }, - { "Mixer", 0x5 }, - }, - }, - -}; - -/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to - * the Fujitsu S702x, but jacks are marked differently. - */ -static const struct hda_input_mux alc260_acer_capture_sources[2] = { - { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - { "Headphone", 0x5 }, - }, - }, - { - .num_items = 5, - .items = { - { "Mic", 0x0 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - { "Headphone", 0x6 }, - { "Mixer", 0x5 }, - }, - }, -}; - -/* Maxdata Favorit 100XS */ -static const struct hda_input_mux alc260_favorit100_capture_sources[2] = { - { - .num_items = 2, - .items = { - { "Line/Mic", 0x0 }, - { "CD", 0x4 }, - }, - }, - { - .num_items = 3, - .items = { - { "Line/Mic", 0x0 }, - { "CD", 0x4 }, - { "Mixer", 0x5 }, - }, - }, -}; - -/* - * This is just place-holder, so there's something for alc_build_pcms to look - * at when it calculates the maximum number of channels. ALC260 has no mixer - * element which allows changing the channel mode, so the verb list is - * never used. - */ -static const struct hda_channel_mode alc260_modes[1] = { - { 2, NULL }, -}; - - -/* Mixer combinations - * - * basic: base_output + input + pc_beep + capture - * fujitsu: fujitsu + capture - * acer: acer + capture - */ - -static const struct snd_kcontrol_new alc260_base_output_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), - HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), - { } /* end */ -}; - -static const struct snd_kcontrol_new alc260_input_mixer[] = { - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT), - { } /* end */ -}; - -/* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12, - * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10. - */ -static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = { - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT), - ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT), - ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN), - HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT), - { } /* end */ -}; - -/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks. Note that current - * versions of the ALC260 don't act on requests to enable mic bias from NID - * 0x0f (used to drive the headphone jack in these laptops). The ALC260 - * datasheet doesn't mention this restriction. At this stage it's not clear - * whether this behaviour is intentional or is a hardware bug in chip - * revisions available in early 2006. Therefore for now allow the - * "Headphone Jack Mode" control to span all choices, but if it turns out - * that the lack of mic bias for this NID is intentional we could change the - * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS. - * - * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006 - * don't appear to make the mic bias available from the "line" jack, even - * though the NID used for this jack (0x14) can supply it. The theory is - * that perhaps Acer have included blocking capacitors between the ALC260 - * and the output jack. If this turns out to be the case for all such - * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT - * to ALC_PIN_DIR_INOUT_NOMICBIAS. - * - * The C20x Tablet series have a mono internal speaker which is controlled - * via the chip's Mono sum widget and pin complex, so include the necessary - * controls for such models. On models without a "mono speaker" the control - * won't do anything. - */ -static const struct snd_kcontrol_new alc260_acer_mixer[] = { - HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), - ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, - HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, - HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), - ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), - HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), - ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), - { } /* end */ -}; - -/* Maxdata Favorit 100XS: one output and one input (0x12) jack - */ -static const struct snd_kcontrol_new alc260_favorit100_mixer[] = { - HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), - ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT), - ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), - { } /* end */ -}; - -/* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12, - * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17. - */ -static const struct snd_kcontrol_new alc260_will_mixer[] = { - HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), - ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), - HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), - ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - { } /* end */ -}; - -/* Replacer 672V ALC260 pin usage: Mic jack = 0x12, - * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f. - */ -static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = { - HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), - ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), - HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT), - HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), - ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT), - { } /* end */ -}; - -/* - * initialization verbs - */ -static const struct hda_verb alc260_init_verbs[] = { - /* Line In pin widget for input */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* CD pin widget for input */ - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Mic1 (rear panel) pin widget for input and vref at 80% */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* Mic2 (front panel) pin widget for input and vref at 80% */ - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* LINE-2 is used for line-out in rear */ - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* select line-out */ - {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* LINE-OUT pin */ - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* enable HP */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - /* enable Mono */ - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to line in (default select for this ADC) */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* mute capture amp left and right */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to line in (default select for this ADC) */ - {0x05, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* set vol=0 Line-Out mixer amp left and right */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute pin widget amp left and right (no gain on this amp) */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* set vol=0 HP mixer amp left and right */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute pin widget amp left and right (no gain on this amp) */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* set vol=0 Mono mixer amp left and right */ - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute pin widget amp left and right (no gain on this amp) */ - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* unmute LINE-2 out pin */ - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & - * Line In 2 = 0x03 - */ - /* mute analog inputs */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ - /* mute Front out path */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* mute Headphone out path */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* mute Mono out path */ - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - { } -}; - -/* Initialisation sequence for ALC260 as configured in Fujitsu S702x - * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD - * audio = 0x16, internal speaker = 0x10. - */ -static const struct hda_verb alc260_fujitsu_init_verbs[] = { - /* Disable all GPIOs */ - {0x01, AC_VERB_SET_GPIO_MASK, 0}, - /* Internal speaker is connected to headphone pin */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - /* Headphone/Line-out jack connects to Line1 pin; make it an output */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Mic/Line-in jack is connected to mic1 pin, so make it an input */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Ensure all other unused pins are disabled and muted. */ - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - - /* Disable digital (SPDIF) pins */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - - /* Ensure Line1 pin widget takes its input from the OUT1 sum bus - * when acting as an output. - */ - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - - /* Start with output sum widgets muted and their output gains at min */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute Line1 pin widget output buffer since it starts as an output. - * If the pin mode is changed by the user the pin mode control will - * take care of enabling the pin's input/output buffers as needed. - * Therefore there's no need to enable the input buffer at this - * stage. - */ - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute input buffer of pin widget used for Line-in (no equiv - * mixer ctrl) - */ - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting - line - * in (on mic1 pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do the same for the second ADC: mute capture input amp and - * set ADC connection to line in (on mic1 pin) - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ - - { } -}; - -/* Initialisation sequence for ALC260 as configured in Acer TravelMate and - * similar laptops (adapted from Fujitsu init verbs). - */ -static const struct hda_verb alc260_acer_init_verbs[] = { - /* On TravelMate laptops, GPIO 0 enables the internal speaker and - * the headphone jack. Turn this on and rely on the standard mute - * methods whenever the user wants to turn these outputs off. - */ - {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, - /* Internal speaker/Headphone jack is connected to Line-out pin */ - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - /* Internal microphone/Mic jack is connected to Mic1 pin */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, - /* Line In jack is connected to Line1 pin */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */ - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - /* Ensure all other unused pins are disabled and muted. */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Disable digital (SPDIF) pins */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - - /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum - * bus when acting as outputs. - */ - {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - - /* Start with output sum widgets muted and their output gains at min */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* Unmute Line-out pin widget amp left and right - * (no equiv mixer ctrl) - */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute mono pin widget amp output (no equiv mixer ctrl) */ - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute Mic1 and Line1 pin widget input buffers since they start as - * inputs. If the pin mode is changed by the user the pin mode control - * will take care of enabling the pin's input/output buffers as needed. - * Therefore there's no need to enable the input buffer at this - * stage. - */ - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting - mic - * (on mic1 pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do similar with the second ADC: mute capture input amp and - * set ADC connection to mic to match ALSA's default state. - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ - - { } -}; - -/* Initialisation sequence for Maxdata Favorit 100XS - * (adapted from Acer init verbs). - */ -static const struct hda_verb alc260_favorit100_init_verbs[] = { - /* GPIO 0 enables the output jack. - * Turn this on and rely on the standard mute - * methods whenever the user wants to turn these outputs off. - */ - {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, - /* Line/Mic input jack is connected to Mic1 pin */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, - /* Ensure all other unused pins are disabled and muted. */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Disable digital (SPDIF) pins */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - - /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum - * bus when acting as outputs. - */ - {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - - /* Start with output sum widgets muted and their output gains at min */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* Unmute Line-out pin widget amp left and right - * (no equiv mixer ctrl) - */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute Mic1 and Line1 pin widget input buffers since they start as - * inputs. If the pin mode is changed by the user the pin mode control - * will take care of enabling the pin's input/output buffers as needed. - * Therefore there's no need to enable the input buffer at this - * stage. - */ - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting - mic - * (on mic1 pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do similar with the second ADC: mute capture input amp and - * set ADC connection to mic to match ALSA's default state. - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ - - { } -}; - -static const struct hda_verb alc260_will_verbs[] = { - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x0d, AC_VERB_SET_CONNECT_SEL, 0x00}, - {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, - {0x1a, AC_VERB_SET_COEF_INDEX, 0x07}, - {0x1a, AC_VERB_SET_PROC_COEF, 0x3040}, - {} -}; - -static const struct hda_verb alc260_replacer_672v_verbs[] = { - {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02}, - {0x1a, AC_VERB_SET_COEF_INDEX, 0x07}, - {0x1a, AC_VERB_SET_PROC_COEF, 0x3050}, - - {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, - - {0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {} -}; - -/* toggle speaker-output according to the hp-jack state */ -static void alc260_replacer_672v_automute(struct hda_codec *codec) -{ - unsigned int present; - - /* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */ - present = snd_hda_jack_detect(codec, 0x0f); - if (present) { - snd_hda_codec_write_cache(codec, 0x01, 0, - AC_VERB_SET_GPIO_DATA, 1); - snd_hda_codec_write_cache(codec, 0x0f, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - PIN_HP); - } else { - snd_hda_codec_write_cache(codec, 0x01, 0, - AC_VERB_SET_GPIO_DATA, 0); - snd_hda_codec_write_cache(codec, 0x0f, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - PIN_OUT); - } -} - -static void alc260_replacer_672v_unsol_event(struct hda_codec *codec, - unsigned int res) -{ - if ((res >> 26) == ALC_HP_EVENT) - alc260_replacer_672v_automute(codec); -} - -static const struct hda_verb alc260_hp_dc7600_verbs[] = { - {0x05, AC_VERB_SET_CONNECT_SEL, 0x01}, - {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {} -}; - -/* Test configuration for debugging, modelled after the ALC880 test - * configuration. - */ -#ifdef CONFIG_SND_DEBUG -static const hda_nid_t alc260_test_dac_nids[1] = { - 0x02, -}; -static const hda_nid_t alc260_test_adc_nids[2] = { - 0x04, 0x05, -}; -/* For testing the ALC260, each input MUX needs its own definition since - * the signal assignments are different. This assumes that the first ADC - * is NID 0x04. - */ -static const struct hda_input_mux alc260_test_capture_sources[2] = { - { - .num_items = 7, - .items = { - { "MIC1 pin", 0x0 }, - { "MIC2 pin", 0x1 }, - { "LINE1 pin", 0x2 }, - { "LINE2 pin", 0x3 }, - { "CD pin", 0x4 }, - { "LINE-OUT pin", 0x5 }, - { "HP-OUT pin", 0x6 }, - }, - }, - { - .num_items = 8, - .items = { - { "MIC1 pin", 0x0 }, - { "MIC2 pin", 0x1 }, - { "LINE1 pin", 0x2 }, - { "LINE2 pin", 0x3 }, - { "CD pin", 0x4 }, - { "Mixer", 0x5 }, - { "LINE-OUT pin", 0x6 }, - { "HP-OUT pin", 0x7 }, - }, - }, -}; -static const struct snd_kcontrol_new alc260_test_mixer[] = { - /* Output driver widgets */ - HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), - HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT), - HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT), - - /* Modes for retasking pin widgets - * Note: the ALC260 doesn't seem to act on requests to enable mic - * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't - * mention this restriction. At this stage it's not clear whether - * this behaviour is intentional or is a hardware bug in chip - * revisions available at least up until early 2006. Therefore for - * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all - * choices, but if it turns out that the lack of mic bias for these - * NIDs is intentional we could change their modes from - * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS. - */ - ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT), - - /* Loopback mixer controls */ - HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT), - HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT), - HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT), - HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT), - HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT), - HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT), - HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT), - - /* Controls for GPIO pins, assuming they are configured as outputs */ - ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), - ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), - ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), - ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), - - /* Switches to allow the digital IO pins to be enabled. The datasheet - * is ambigious as to which NID is which; testing on laptops which - * make this output available should provide clarification. - */ - ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01), - ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01), - - /* A switch allowing EAPD to be enabled. Some laptops seem to use - * this output to turn on an external amplifier. - */ - ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02), - ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02), - - { } /* end */ -}; -static const struct hda_verb alc260_test_init_verbs[] = { - /* Enable all GPIOs as outputs with an initial value of 0 */ - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, - {0x01, AC_VERB_SET_GPIO_MASK, 0x0f}, - - /* Enable retasking pins as output, initially without power amp */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - - /* Disable digital (SPDIF) pins initially, but users can enable - * them via a mixer switch. In the case of SPDIF-out, this initverb - * payload also sets the generation to 0, output to be in "consumer" - * PCM format, copyright asserted, no pre-emphasis and no validity - * control. - */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - - /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the - * OUT1 sum bus when acting as an output. - */ - {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0c, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0e, AC_VERB_SET_CONNECT_SEL, 0}, - - /* Start with output sum widgets muted and their output gains at min */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* Unmute retasking pin widget output buffers since the default - * state appears to be output. As the pin mode is changed by the - * user the pin mode control will take care of enabling the pin's - * input/output buffers as needed. - */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Also unmute the mono-out pin widget */ - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting (mic1 - * pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do the same for the second ADC: mute capture input amp and - * set ADC connection to mic1 pin - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ - - { } -}; -#endif - -/* - * ALC260 configurations - */ -static const char * const alc260_models[ALC260_MODEL_LAST] = { - [ALC260_BASIC] = "basic", - [ALC260_FUJITSU_S702X] = "fujitsu", - [ALC260_ACER] = "acer", - [ALC260_WILL] = "will", - [ALC260_REPLACER_672V] = "replacer", - [ALC260_FAVORIT100] = "favorit100", -#ifdef CONFIG_SND_DEBUG - [ALC260_TEST] = "test", -#endif - [ALC260_AUTO] = "auto", -}; - -static const struct snd_pci_quirk alc260_cfg_tbl[] = { - SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER), - SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL), - SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), - SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), - SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC), - SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC), - SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC), - SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X), - SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC), - SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V), - SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL), - {} -}; - -static const struct alc_config_preset alc260_presets[] = { - [ALC260_BASIC] = { - .mixers = { alc260_base_output_mixer, - alc260_input_mixer }, - .init_verbs = { alc260_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), - .adc_nids = alc260_dual_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .input_mux = &alc260_capture_source, - }, - [ALC260_FUJITSU_S702X] = { - .mixers = { alc260_fujitsu_mixer }, - .init_verbs = { alc260_fujitsu_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), - .adc_nids = alc260_dual_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources), - .input_mux = alc260_fujitsu_capture_sources, - }, - [ALC260_ACER] = { - .mixers = { alc260_acer_mixer }, - .init_verbs = { alc260_acer_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), - .adc_nids = alc260_dual_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources), - .input_mux = alc260_acer_capture_sources, - }, - [ALC260_FAVORIT100] = { - .mixers = { alc260_favorit100_mixer }, - .init_verbs = { alc260_favorit100_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), - .adc_nids = alc260_dual_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources), - .input_mux = alc260_favorit100_capture_sources, - }, - [ALC260_WILL] = { - .mixers = { alc260_will_mixer }, - .init_verbs = { alc260_init_verbs, alc260_will_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_adc_nids), - .adc_nids = alc260_adc_nids, - .dig_out_nid = ALC260_DIGOUT_NID, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .input_mux = &alc260_capture_source, - }, - [ALC260_REPLACER_672V] = { - .mixers = { alc260_replacer_672v_mixer }, - .init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_adc_nids), - .adc_nids = alc260_adc_nids, - .dig_out_nid = ALC260_DIGOUT_NID, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .input_mux = &alc260_capture_source, - .unsol_event = alc260_replacer_672v_unsol_event, - .init_hook = alc260_replacer_672v_automute, - }, -#ifdef CONFIG_SND_DEBUG - [ALC260_TEST] = { - .mixers = { alc260_test_mixer }, - .init_verbs = { alc260_test_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_test_dac_nids), - .dac_nids = alc260_test_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids), - .adc_nids = alc260_test_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources), - .input_mux = alc260_test_capture_sources, - }, -#endif -}; - |